Add tests for failed injections to vgic_irq. This tests that KVM can
handle bogus IRQ numbers.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-14-ricarkol@google.com
Add injection tests for the LEVEL_INFO ioctl (level-sensitive specific)
into vgic_irq.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-13-ricarkol@google.com
Add a cmdline arg for using level-sensitive interrupts (vs the default
edge-triggered). Then move the handler into a generic handler function
that takes the type of interrupt (level vs. edge) as an arg. When
handling line-sensitive interrupts it sets the line to low after
acknowledging the IRQ.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-12-ricarkol@google.com
Add tests for IRQ preemption (having more than one activated IRQ at the
same time). This test injects multiple concurrent IRQs and handles them
without handling the actual exceptions. This is done by masking
interrupts for the whole test.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-11-ricarkol@google.com
Add a new cmdline arg to set the EOI mode for all vgic_irq tests. This
specifies whether a write to EOIR will deactivate IRQs or not.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-10-ricarkol@google.com
Add the ability to specify the number of vIRQs exposed by KVM (arg
defaults to 64). Then extend the KVM_IRQ_LINE test by injecting all
available SPIs at once (specified by the nr-irqs arg). As a bonus,
inject all SGIs at once as well.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-9-ricarkol@google.com
Build an abstraction around the injection functions, so the preparation
and checking around the actual injection can be shared between tests.
All functions are stored as pointers in arrays of kvm_inject_desc's
which include the pointer and what kind of interrupts they can inject.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-8-ricarkol@google.com
Add a new KVM selftest, vgic_irq, for testing userspace IRQ injection. This
particular test injects an SPI using KVM_IRQ_LINE on GICv3 and verifies
that the IRQ is handled in the guest. The next commits will add more
types of IRQs and different modes.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-7-ricarkol@google.com
Add a set of library functions for userspace code in selftests to deal
with vIRQ state (i.e., ioctl wrappers).
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-6-ricarkol@google.com
Add an architecture independent wrapper function for the KVM_IRQ_LINE
ioctl.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-5-ricarkol@google.com
Add a generic library function for reading and writing GICv3 distributor
and redistributor registers. Then adapt some functions to use it; more
will come and use it in the next commit.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-3-ricarkol@google.com
Move gic_v3.h to the shared headers location. There are some definitions
that will be used in the vgic-irq test.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-2-ricarkol@google.com
The 16kB page size is not a popular choice, due to only a few CPUs
actually implementing support for it. However, it can lead to some
interesting performance improvements given the right uarch choices.
Add support for this page size for various PA/VA combinations.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-7-maz@kernel.org
Some of the arm64 systems out there have an IPA space that is
positively tiny. Nonetheless, they make great KVM hosts.
Add support for 36bit IPA support with 4kB pages, which makes
some of the fruity machines happy. Whilst we're at it, add support
for 64kB pages as well, though these boxes have no support for it.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211227124809.1335409-6-maz@kernel.org
The current way we initialise TCR_EL1 is a bit cumbersome, as
we mix setting TG0 and IPS in the same swtch statement.
Split it into two statements (one for the base granule size, and
another for the IPA size), allowing new modes to be added in a
more elegant way.
No functional change intended.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-5-maz@kernel.org
Just as arm64 implemenations don't necessary support all IPA
ranges, they don't all support the same page sizes either. Fun.
Create a dummy VM to snapshot the page sizes supported by the
host, and filter the supported modes.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-4-maz@kernel.org
Contrary to popular belief, there is no such thing as a default
IPA size on arm64. Anything goes, and implementations are the
usual Wild West.
The selftest infrastructure default to 40bit IPA, which obviously
doesn't work for some systems out there.
Turn VM_MODE_DEFAULT from a constant into a variable, and let
guest_modes_append_default() populate it, depending on what
the HW can do. In order to preserve the current behaviour, we
still pick 40bits IPA as the default if it is available, and
the largest supported IPA space otherwise.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-3-maz@kernel.org
As we are going to add support for a variable default mode on arm64,
let's make sure it is setup first by using a constructor that gets
called before the actual test runs.
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-2-maz@kernel.org
Introduce a user space tool to make use of the interface exposed by
Platform Firmware Runtime Update and Telemetry drivers.
It can be used for firmware code injection, driver updates and
to retrieve platform firmware telemetry data.
Tested-by: Hongyu Ning <hongyu.ning@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge tmon fix and int340x driver improvement for 5.17-rc1.
* thermal-tools:
thermal: tools: tmon: remove unneeded local variable
* thermal-int340x:
thermal: int340x: Use struct_group() for memcpy() region
NFT_COUNTER was removed since
390ad4295aa ("netfilter: nf_tables: make counter support built-in")
LKP/0Day will check if all configs listing under selftests are able to
be enabled properly.
For the missing configs, it will report something like:
LKP WARN miss config CONFIG_NFT_COUNTER= of net/mptcp/config
- it's not reasonable to keep the deprecated configs.
- configs under kselftests are recommended by corresponding tests.
So if some configs are missing, it will impact the testing results
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ma Xinjian <xinjianx.ma@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enumerations should return a value between 0 and items-1, check that this
is the case.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211217130213.3893415-3-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To simplify the code a bit and allow future reuse factor the checks that
values we read are valid out of test_ctl_get_value() into a separate
function which can be reused later. As part of this extend the test to
check all the values for the control, not just the first one.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211217130213.3893415-2-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a test of sigreturning to an unaligned address (low two bits set).
This should have no effect because the hardware will mask those bits.
However it previously falsely triggered a warning when
CONFIG_PPC_RFI_SRR_DEBUG=y.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221135101.2085547-3-mpe@ellerman.id.au
This release adds following change:
- Update max performance when BIOS disabled turbo
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When BIOS disables turbo, the cpuinfo_max_freq will also be same as the
power up base frequency. When SST-PP causes increase in base frequency
the performance will be still limited to the old base frequency as the
cpuinfo_max_freq will not be updated.
In this case we need to update scaling_max frequency to the new
base_frequency. This will result in setting updated max performance
limit in the Pstate driver. So performance will not be limited to the
old base frequency.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The below referenced commit correctly updated the computation of number
of segments (gso_size) by using only the gso payload size and
removing the header lengths.
With this change the regression test started failing. Update
the tests to match this new behavior.
Both IPv4 and IPv6 tests are updated, as a separate patch in this series
will update udp_v6_send_skb to match this change in udp_send_skb.
Fixes: 158390e456 ("udp: using datalen to cap max gso segments")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211223222441.2975883-2-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding btf_dump__new call to test_cpp, so we can
test C++ compilation with that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211223131736.483956-2-jolsa@kernel.org
Change the case that sends packets with "too short inner packet" to
include part of ethernet header, to make the trap to be triggered due to
the correct reason.
According to ASIC arch, the trap is triggered if overlay packet length is
less than 18B, and the minimum inner packet should include source MAC and
destination MAC.
Till now the case passed because one of the reserved bits in VxLAN
header was used. This issue was found while adding an equivalent test
for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test configures VxLAN with IPv6 underlay and verifies that the
expected traps are triggered under the right conditions.
The test is similar to the existing IPv4 test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device stores flood records in a singly linked list where each
record stores up to X IP addresses of remote VTEPs.
The number of records is changed according to ASIC type and address
family.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test is dedicated for Spectrum-2 and above, which support up to four
IPv6 addresses in one record.
The test verifies that packets are correctly flooded in various cases such
as deletion of a record in the middle of the list.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device stores flood records in a singly linked list where each
record stores up to X IP addresses of remote VTEPs.
The number of records is changed according to ASIC type and address
family.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test is dedicated for Spectrum-1 switches, which support up to five
IPv6 addresses in one record.
The test verifies that packets are correctly flooded in various cases such
as deletion of a record in the middle of the list.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test to verify FDB vetos of VxLAN with IPv6 underlay.
Use the existing test which checks IPv4.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vxlan_fdb_veto.sh cases are dedicated to test VxLAN with IPv4 underlay.
The main changes to test IPv6 underlay are IP addresses and some flags.
Add variables to define all the values which supposed to be different
for IPv6 testing, set them to use the existing values by default.
The next patch will define the new added variables in a separated file,
so the same tests can be used for IPv6 also.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test to verify configuration of VxLAN with IPv6 underlay.
Use the existing test which checks IPv4.
Add separated test cases for learning which is not supported for IPv6
and for UDP checksum flags which are different from IPv4 flags.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vxlan.sh cases are dedicated to test VxLAN with IPv4 underlay.
The main changes to test IPv6 underlay are IP addresses and some flags.
Add variables to define all the values which supposed to be different
for IPv6 testing, set them to use the existing values by default.
The next patch will define the new added variables in a separated file,
so the same tests can be used for IPv6 also.
Rename some functions to include "ipv4", so the next patch will add
equivalent functions for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test to check Q-in-VNI traffic with IPv6 underlay and overlay.
The test is similar to the existing IPv4 test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a similar fashion to the asymmetric test, add a test for symmetric
routing. In symmetric routing both the ingress and egress VTEPs perform
routing in the overlay network into / from the VxLAN tunnel. Packets in
different directions use the same VNI - the L3 VNI.
Different tenants (VRFs) use different L3 VNIs.
Add a test which is similar to the existing IPv4 test to check IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In asymmetric routing the ingress VTEP routes the packet into the
correct VxLAN tunnel, whereas the egress VTEP only bridges the packet to
the correct host. Therefore, packets in different directions use
different VNIs - the target VNI.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test uses a simple topology with two VTEPs and two VNIs and verifies
that ping passes between hosts (local / remote) in the same VLAN (VNI)
and in different VLANs belonging to the same tenant (VRF).
While the test does not check VM mobility, it does configure an anycast
gateway using a macvlan device on both VTEPs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove `vxlan_ping_test()` which is not used and probably was copied
mistakenly from vxlan_bridge_1d.sh.
This was found while adding an equivalent test for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tests are very similar to their VLAN-unaware counterpart
(vxlan_bridge_1d_ipv6.sh and vxlan_bridge_1d_port_8472_ipv6.sh),
but instead of using multiple VLAN-unaware bridges, a single VLAN-aware
bridge is used with multiple VLANs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests similar to vxlan_bridge_1d.sh and vxlan_bridge_1d_port_8472.sh.
The tests set up a topology with three VxLAN endpoints: one
"local", possibly offloaded, and two "remote", formed using veth pairs
and likely purely software bridges. The "local" endpoint is connected to
host systems by a VLAN-unaware bridge.
Since VxLAN tunnels must be unique per namespace, each of the "remote"
endpoints is in its own namespace. H3 forms the bridge between the three
domains.
Send IPv4 packets and IPv6 packets with IPv6 underlay.
Use `TC_FLAG`, which is defined in `forwarding.config` file, for TC
checks. `TC_FLAG` allows testing that on HW datapath, the traffic
actually goes through HW.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently `ping_do()` and `ping6_do()` send 10 packets.
There are cases that it is not possible to catch only the interesting
packets using tc rule, so then, it is possible to send many packets and
verify that at least this amount of packets hit the rule.
Add `PING_COUNT` variable, which is set to 10 by default, to allow tests
sending more than 10 packets using the existing ping API.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If destination port is above 32k and source port below 16k
assume this might cause 'port shadowing' where a 'new' inbound
connection matches an existing one, e.g.
inbound X:41234 -> Y:53 matches existing conntrack entry
Z:53 -> X:4123, where Z got natted to X.
In this case, new packet is natted to Z:53 which is likely
unwanted.
We avoid the rewrite for connections that originate from local host:
port-shadowing is only possible with forwarded connections.
Also adjust test case.
v3: no need to call tuple_force_port_remap if already in random mode (Phil)
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add new macros for mem_hops field which can be used to represent
remote-node, socket and board level details.
Currently the code had macro for HOPS_0 which, corresponds to data
coming from another core but same node. Add new macros for HOPS_1 to
HOPS_3 to represent remote-node, socket and board level data.
Also add corresponding strings in the mem_hops array to represent
mem_hop field data in perf_mem__lvl_scnprintf function
Incase mem_hops field is used, PERF_MEM_LVLNUM field also need to be set
inorder to represent the data source. Hence printing data source via
PERF_MEM_LVL field can be skip in that scenario.
For ex: Encodings for mem_hops fields with L2 cache:
L2 - local L2
L2 | REMOTE | HOPS_0 - remote core, same node L2
L2 | REMOTE | HOPS_1 - remote node, same socket L2
L2 | REMOTE | HOPS_2 - remote socket, same board L2
L2 | REMOTE | HOPS_3 - remote board L2
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20211206091749.87585-3-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Includes some fixes that were either late breaking, low priority or
complex enough to not be good to rush in late in the cycle.
Tree rebased today to fix up some trivial issues + pull in a fix that
was previously on the fixes-togreg branch. Vast majority have been
in linux-next for some time now.
New device support
* adi,ad7293
- New driver and bindings for this Power Amplifier drain current
controller. A complex device with various related monitoring functions.
* adi,ad75513R
- New driver and bindings for this combined ADC and DAC device.
- A few follow up fixes.
* adi,admv8818
- New driver (and type) for this 2-18GHz filter device. Includes
bindings and ABI documentation to allow clk_notifier based auto
adjustment of the filters in appropriate applications.
* liteon,ltr501
- Support for the ltr303. ID and chip specific info table.
* xilinx,ams
- New generic firmware function fwnode_iomap() as used in this driver.
- New driver and bindings for this ADC and on-chip sensors as found
in various Xilinx devices.
Core
* Introduced IIO_VAL_INT_64 which uses val and val2 in IIO callbacks to
form a 64 bit integer when higher precision needed.
* Allow IIO_ENUM_AVAILABLE to be used with different shared values.
* Fix a long term issue with scheduling whilst atomic when iio_trig_poll()
is called but no trigger consumers are actually enabled and hence the
trigger may be reenabled from the interrupt handler. Seen in the wild
on the tsc2046.
* Mark iio_device_type const.
* buffer: Use a separate index variable to simplify code.
* buffer-dma: Clear out unused struct iio_buffer_block
* buffer-dmaengine: Switch to cheaper round_down() as power of 2 values.
Tests/tools
* format_value
- Check against NULL returns from allocations in tests.
- Add IIO_VAL_INT_64 test case.
* event_monitor
- Flush the output after event to given more consistent latency
when tool output piped to other programs.
Driver Features
* axp20x
- Add support for NTC thermistor channel and document TS pin binding.
* arm,scmi
- Add reading of raw channel values (using IIO_VAL_INT_64)
* liteon,ltr501
- Add proximity-near-level support and dt-binding.
Tree wide cleanup
* Remove no-op trigger ops from multiple drivers.
* Stop using dev_get_drvdata() on the iio_dev->dev in various drivers
and then stop assigning it to allow this to be used for other purposes.
We can always get to the indio_dev using dev_to_iio_dev() which is
a container_of() based approach. Also cleanup up some related unnecessary
convoluted cases.
- atmel,at91-sam5d2
- nxp,imx7d
- meas,ms5611
- st,st_sensors
* Where available (or easy to introduce) use the scan_type.* values
in place of a second copy for read_raw and similar paths.
- adi,ad7266
- bosch,bma220
- fsl,mac3110
- fsl,mma7455
- fsl,mpl3115
- kionix,kcjk-1013
- sensortek,stk8ba50
- sensortek,stk8312
- ti,adc12138
- ti,ads1015
- vti,sca3000
- xilinx,xadc-core
* Switch drives over to generic firmware properties including appropriate
header changes to avoid including of.h
- Various DACs had false CONFIG_OF dependencies.
- dpot-dac
- envelope-detector
- adi,ad5755
- adi,ad5758
- capella,cm3605
- maxim,max9611
- microchip,mcp41010
- microchip,mcp3911
- ti,adc12138
* Trivial clang warning fixes for W=1 warnings.
Driver specific cleanup and minor fixes
* adi,ad7606
- Comment fixes.
* ams,ad3935
- Drop pointless cast to the same type.
* atmel,at91-sama5d2
- Fix wrong cast of iio_dev->dev to platform_device that happened to
be harmless.
* fsl,mma7660
- Stop i2c remove() function returning an error code. Part of a rework
to eventually stop returning anything from these.
* fsl,mma8452
- Use correct type for local irqreturn_t.
* nxp,imx8mq
- Maintainer email address update.
* nxp,lpc18xx_adc
- Ensure clk_prepare_enable() called before clk_get_rate().
- Switch of.h for mod_devicetable.h to reflect no of specific functions,
just the id table.
* renesas,rzg2l
- Drop a dev_err() that just duplicates error printed in platform_get_irq()
* sgx,vz89x
- Drop pointless cast.
* st,lsm6dsx
- Make it possible to disable the sensorhub from DT to avoid a corner
case where the address of a slave device many be accidentally modified.
* st,stm32-adc
- Stop leaking an of_node in an error path.
* st,stmp2
- Avoid wrong sized type for bit field which could result in
over-reading (harmless). Precursor to enabling -Warray-bounds.
* ti,adc081c
- Put back some ACPI support for non standards compliant ADC081C
ID because it is known to be in the wild on some Aaeon boards.
* ti,ads8688
- Cleanup redundant local ret variable assignment.
* ti,ina2xx-adc
- Use helper macro kthread_run() to replace some boilerplate.
- Avoid double reference counting.
- Drop pointless cast.
* xilinx,xadc
- Make the IRQ optional as not always wired to the host system.
-----BEGIN PGP SIGNATURE-----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=xXvq
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 5.17
Includes some fixes that were either late breaking, low priority or
complex enough to not be good to rush in late in the cycle.
Tree rebased today to fix up some trivial issues + pull in a fix that
was previously on the fixes-togreg branch. Vast majority have been
in linux-next for some time now.
New device support
* adi,ad7293
- New driver and bindings for this Power Amplifier drain current
controller. A complex device with various related monitoring functions.
* adi,ad75513R
- New driver and bindings for this combined ADC and DAC device.
- A few follow up fixes.
* adi,admv8818
- New driver (and type) for this 2-18GHz filter device. Includes
bindings and ABI documentation to allow clk_notifier based auto
adjustment of the filters in appropriate applications.
* liteon,ltr501
- Support for the ltr303. ID and chip specific info table.
* xilinx,ams
- New generic firmware function fwnode_iomap() as used in this driver.
- New driver and bindings for this ADC and on-chip sensors as found
in various Xilinx devices.
Core
* Introduced IIO_VAL_INT_64 which uses val and val2 in IIO callbacks to
form a 64 bit integer when higher precision needed.
* Allow IIO_ENUM_AVAILABLE to be used with different shared values.
* Fix a long term issue with scheduling whilst atomic when iio_trig_poll()
is called but no trigger consumers are actually enabled and hence the
trigger may be reenabled from the interrupt handler. Seen in the wild
on the tsc2046.
* Mark iio_device_type const.
* buffer: Use a separate index variable to simplify code.
* buffer-dma: Clear out unused struct iio_buffer_block
* buffer-dmaengine: Switch to cheaper round_down() as power of 2 values.
Tests/tools
* format_value
- Check against NULL returns from allocations in tests.
- Add IIO_VAL_INT_64 test case.
* event_monitor
- Flush the output after event to given more consistent latency
when tool output piped to other programs.
Driver Features
* axp20x
- Add support for NTC thermistor channel and document TS pin binding.
* arm,scmi
- Add reading of raw channel values (using IIO_VAL_INT_64)
* liteon,ltr501
- Add proximity-near-level support and dt-binding.
Tree wide cleanup
* Remove no-op trigger ops from multiple drivers.
* Stop using dev_get_drvdata() on the iio_dev->dev in various drivers
and then stop assigning it to allow this to be used for other purposes.
We can always get to the indio_dev using dev_to_iio_dev() which is
a container_of() based approach. Also cleanup up some related unnecessary
convoluted cases.
- atmel,at91-sam5d2
- nxp,imx7d
- meas,ms5611
- st,st_sensors
* Where available (or easy to introduce) use the scan_type.* values
in place of a second copy for read_raw and similar paths.
- adi,ad7266
- bosch,bma220
- fsl,mac3110
- fsl,mma7455
- fsl,mpl3115
- kionix,kcjk-1013
- sensortek,stk8ba50
- sensortek,stk8312
- ti,adc12138
- ti,ads1015
- vti,sca3000
- xilinx,xadc-core
* Switch drives over to generic firmware properties including appropriate
header changes to avoid including of.h
- Various DACs had false CONFIG_OF dependencies.
- dpot-dac
- envelope-detector
- adi,ad5755
- adi,ad5758
- capella,cm3605
- maxim,max9611
- microchip,mcp41010
- microchip,mcp3911
- ti,adc12138
* Trivial clang warning fixes for W=1 warnings.
Driver specific cleanup and minor fixes
* adi,ad7606
- Comment fixes.
* ams,ad3935
- Drop pointless cast to the same type.
* atmel,at91-sama5d2
- Fix wrong cast of iio_dev->dev to platform_device that happened to
be harmless.
* fsl,mma7660
- Stop i2c remove() function returning an error code. Part of a rework
to eventually stop returning anything from these.
* fsl,mma8452
- Use correct type for local irqreturn_t.
* nxp,imx8mq
- Maintainer email address update.
* nxp,lpc18xx_adc
- Ensure clk_prepare_enable() called before clk_get_rate().
- Switch of.h for mod_devicetable.h to reflect no of specific functions,
just the id table.
* renesas,rzg2l
- Drop a dev_err() that just duplicates error printed in platform_get_irq()
* sgx,vz89x
- Drop pointless cast.
* st,lsm6dsx
- Make it possible to disable the sensorhub from DT to avoid a corner
case where the address of a slave device many be accidentally modified.
* st,stm32-adc
- Stop leaking an of_node in an error path.
* st,stmp2
- Avoid wrong sized type for bit field which could result in
over-reading (harmless). Precursor to enabling -Warray-bounds.
* ti,adc081c
- Put back some ACPI support for non standards compliant ADC081C
ID because it is known to be in the wild on some Aaeon boards.
* ti,ads8688
- Cleanup redundant local ret variable assignment.
* ti,ina2xx-adc
- Use helper macro kthread_run() to replace some boilerplate.
- Avoid double reference counting.
- Drop pointless cast.
* xilinx,xadc
- Make the IRQ optional as not always wired to the host system.
* tag 'iio-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (103 commits)
iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs
iio:addac:ad74413r: Fix uninitialized ret in a path that won't be hit.
MAINTAINERS: Add maintainer for xilinx-ams
dt-bindings: iio: adc: Add Xilinx AMS binding documentation
iio: adc: Add Xilinx AMS driver
device property: Add fwnode_iomap()
iio:accel:kxcjk-1013: Mark struct __maybe_unused to avoid warning.
iio:accel:bmc150: Mark structure __maybe_unused as only needed with for pm ops.
iio:dummy: Drop set but unused variable len.
iio:magn:ak8975: Suppress clang W=1 warning about pointer to enum conversion.
iio:imu:inv_mpu6050: Suppress clang W=1 warning about pointer to enum conversion.
iio:imu:inv_icm42600: Suppress clang W=1 warning about pointer to enum conversion.
iio:dac:mcp4725: Suppress clang W=1 warning about pointer to enum conversion.
iio:amplifiers:hmc425a: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:ti-ads1015: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:rcar: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:ina2xx-adc: Suppress clang W=1 warning about pointer to enum conversion.
iio:accel:bma180: Suppress clang W=1 warning about pointer to enum conversion.
drivers:iio:dac: Add AD3552R driver support
dt-bindings: iio: dac: Add adi,ad3552r.yaml
...
The output of bpftool prog tracelog is currently buffered, which is
inconvenient when piping the output into other commands. A simple
tracelog | grep will typically not display anything. This patch fixes it
by enabling line buffering on stdout for the whole bpftool binary.
Fixes: 30da46b5dc ("tools: bpftool: add a command to dump the trace pipe")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211220214528.GA11706@Mem
When unwinding using frame pointers on ARM64, the return address of the
current function may not have been pushed into the stack when a function
was interrupted, which makes perf show an incorrect call graph to the
user.
Consider the following example program:
void leaf() {
/* long computation */
}
void parent() {
// (1)
leaf();
// (2)
}
... could be compiled into (using gcc -fno-inline -fno-omit-frame-pointer):
leaf:
/* long computation */
nop
ret
parent:
// (1)
stp x29, x30, [sp, -16]!
mov x29, sp
bl parent
nop
ldp x29, x30, [sp], 16
// (2)
ret
If the program is interrupted at (1), (2), or any point in "leaf:", the
call graph will skip the callers of the current function. We can unwind
using the dwarf info and check if the return addr is the same as the LR
register, and inject the missing frame into the call graph.
Before this patch, the above example shows the following call-graph when
recording using "--call-graph fp" mode in ARM64:
# Children Self Command Shared Object Symbol
# ........ ........ ........ ................ ......................
#
99.86% 99.86% program3 program3 [.] leaf
|
---_start
__libc_start_main
main
leaf
As can be seen, the "parent" function is missing. This is specially
problematic in "leaf" because for leaf functions the compiler may always
omit pushing the return addr into the stack. After this patch, it shows
the correct graph:
# Children Self Command Shared Object Symbol
# ........ ........ ........ ................ ......................
#
99.86% 99.86% program3 program3 [.] leaf
|
---_start
__libc_start_main
main
parent
leaf
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-7-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
[ Rename machine__normalize_is() to machine__normalized_is(), as suggested by James Clark ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactor the SAMPL_REG macro so that it can be used in a followup commit
to obtain the masks for ARM64 registers.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-6-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable dwarf_callchain_users on arm64 which will be needed to do a
DWARF unwind in order to get the caller of the leaf frame.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-5-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactoring script__setup_sample_type() by using callchain_param_setup()
to replace the duplicate code for callchain parameter setting up.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-4-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a mechanism for platforms to inject stack frames for the leaf
frame caller if there is enough information to determine a frame
is missing from dwarf or other post processing mechanisms.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-3-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On ARM64, automatically record the link register if the frame pointer
mode is on. It will be used to do a dwarf unwind to find the caller of
the leaf frame if the frame pointer was omitted.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-2-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is in preparation for adding more tests that will need the test
number to be 3 digts so they align nicely in the output.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20211215160403.69264-3-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* Fix for kvm_run->if_flag on SEV-ES
* Fix for page table use-after-free if yielding during exit_mm()
* Improve behavior when userspace starts a nested guest with invalid state
* Fix missed wakeup with assigned devices but no VT-d posted interrupts
* Do not tell userspace to save/restore an unsupported PMU MSR
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHCGbIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNMSwf+PpOl69xqQCHzLpDtA9MTBZZi5uKc
eZqMtQ7D+T7XYbtMiHBI9zofcbtHlQVC9Na74j8J7bCuvqe8UGS/z93RoZZQ+/dg
seEbQNEgcNlPD1G3JzaipcGhRqQl6j5G9LjuixyFpkS2O27YsRTpb1HJag31uSFV
Xd7Ih0R2YnKCNJqJov324KHpDM3c4FZL8HdCS/gG94qyLHPA2dJ8fOTwCcAK4LP6
tl9XW5InXMVcck9ssDKFpAfipMNNPNPeAHMONbIm6hyG5HkVjcS3JT1bZmkauxky
VIegPlAmorRCig5Hj2QfWEIOfvTUPdmm7WWh+SSZamY6cyvolWs1hV86Bg==
=333O
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Fix for compilation of selftests on non-x86 architectures
- Fix for kvm_run->if_flag on SEV-ES
- Fix for page table use-after-free if yielding during exit_mm()
- Improve behavior when userspace starts a nested guest with invalid
state
- Fix missed wakeup with assigned devices but no VT-d posted interrupts
- Do not tell userspace to save/restore an unsupported PMU MSR
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPU
KVM: selftests: Add test to verify TRIPLE_FAULT on invalid L2 guest state
KVM: VMX: Fix stale docs for kvm-intel.emulate_invalid_guest_state
KVM: nVMX: Synthesize TRIPLE_FAULT for L2 if emulation is required
KVM: VMX: Always clear vmx->fail on emulation_required
selftests: KVM: Fix non-x86 compiling
KVM: x86: Always set kvm_run->if_flag
KVM: x86/mmu: Don't advance iterator after restart due to yielding
KVM: x86: remove PMU FIXED_CTR3 from msrs_to_save_all
We have a general signal fuzzer, sigfuz, which can modify the MSR & NIP
before sigreturn. But the chance of it hitting a kernel address and also
clearing MSR_PR is fairly slim.
So add a specific test of sigreturn to a kernel address, both with and
without attempting to clear MSR_PR (which the kernel must block).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211209115944.4062384-1-mpe@ellerman.id.au
Migration of vmtest to libbpf/ci will change the address
of INDEX in vmtest.sh, which will cause vmtest.sh to not
work due to the failure of rootfs fetching.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Link: https://lore.kernel.org/bpf/20211220050803.2670677-1-pulehui@huawei.com
Add a selftest to attempt to enter L2 with invalid guests state by
exiting to userspace via I/O from L2, and then using KVM_SET_SREGS to set
invalid guest state (marking TR unusable is arbitrary chosen for its
relative simplicity).
This is a regression test for a bug introduced by commit c8607e4a08
("KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if
!from_vmentry"), which incorrectly set vmx->fail=true when L2 had invalid
guest state and ultimately triggered a WARN due to nested_vmx_vmexit()
seeing vmx->fail==true while attempting to synthesize a nested VM-Exit.
The is also a functional test to verify that KVM sythesizes TRIPLE_FAULT
for L2, which is somewhat arbitrary behavior, instead of emulating L2.
KVM should never emulate L2 due to invalid guest state, as it's
architecturally impossible for L1 to run an L2 guest with invalid state
as nested VM-Enter should always fail, i.e. L1 needs to do the emulation.
Stuffing state via KVM ioctl() is a non-architctural, out-of-band case,
hence the TRIPLE_FAULT being rather arbitrary.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211207193006.120997-5-seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Attempting to compile on a non-x86 architecture fails with
include/kvm_util.h: In function ‘vm_compute_max_gfn’:
include/kvm_util.h:79:21: error: dereferencing pointer to incomplete type ‘struct kvm_vm’
return ((1ULL << vm->pa_bits) >> vm->page_shift) - 1;
^~
This is because the declaration of struct kvm_vm is in
lib/kvm_util_internal.h as an effort to make it private to
the test lib code. We can still provide arch specific functions,
though, by making the generic function symbols weak. Do that to
fix the compile error.
Fixes: c8cc43c1ea ("selftests: KVM: avoid failures due to reserved HyperTransport region")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20211214151842.848314-1-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmG/fW8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOVBAf/dZDUEnrsu/o4xVPjPinMihtMstGk
RP7PqmJ+6nHeDsfoivIiigaFchpc0DYq2kU/8iOPkbsEnLyFuhKg1jUHMQiK5ZGY
shWvJq9HEwqAQ4v3H3PC5SomwlO4UmRkbrR4NT1SwFBSIk9s+soVbDZrdL8bJW7x
6XS01LsXeUPEcJj+h9bDGKmnibkiE4hsf9jGMgfiXgF33DB+LDNU9TH9MFn4K6J2
ColgIqZ+o5dXn7wMcsDsw+DTj81nki+gkghmW9k5rC5FA3qmKd3e5T2sgKey3Ztd
J+acNmGyG/hhYNE4RHXaN+ckNEcqywcCA31DfWq87aw6yP4pF2dKWu+BYw==
=yEYt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two small fixes, one of which was being worked around in selftests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Retry page fault if MMU reload is pending and root has no sp
KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDs
KVM: x86: Drop guest CPUID check for host initiated writes to MSR_IA32_PERF_CAPABILITIES
Host initiated writes to MSR_IA32_PERF_CAPABILITIES should not depend
on guest visible CPUIDs and (incorrect) KVM logic implementing it is
about to change. Also, KVM_SET_CPUID{,2} after KVM_RUN is now forbidden
and causes test to fail.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: feb627e8d6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211216165213.338923-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add selftest cases in action police with skip_hw.
Add selftest case to validate flags of filter and action.
These tests depend on corresponding iproute2 command support.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test verifies that a ksym of non-struct can not be directly
updated.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211217003152.48334-10-haoluo@google.com
The fixed commit attempts to get the output file descriptor even if the
file was never opened e.g.
$ perf record uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ]
$ perf inject -i perf.data --vm-time-correlation=dry-run
Segmentation fault (core dumped)
$ gdb --quiet perf
Reading symbols from perf...
(gdb) r inject -i perf.data --vm-time-correlation=dry-run
Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
__GI___fileno (fp=0x0) at fileno.c:35
35 fileno.c: No such file or directory.
(gdb) bt
#0 __GI___fileno (fp=0x0) at fileno.c:35
#1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72
#2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69
#3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017
#4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313
#5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365
#6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409
#7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539
(gdb)
Fixes: 0ae0389362 ("perf tools: Pass a fd to perf_file_header__read_pipe()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211213084829.114772-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fixed commit attempts to close inject.output even if it was never
opened e.g.
$ perf record uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ]
$ perf inject -i perf.data --vm-time-correlation=dry-run
Segmentation fault (core dumped)
$ gdb --quiet perf
Reading symbols from perf...
(gdb) r inject -i perf.data --vm-time-correlation=dry-run
Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48
48 iofclose.c: No such file or directory.
(gdb) bt
#0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48
#1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376
#2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085
#3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313
#4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365
#5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409
#6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539
(gdb)
Fixes: 02e6246f53 ("perf inject: Close inject.output on exit")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211213084829.114772-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hashmap__new() function may return ERR_PTR(-ENOMEM) when malloc()
fails, add IS_ERR() checking for ctx->ids.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211212062504.25841-1-linmq006@gmail.com
[ s/kfree()/free()/ and add missing linux/err.h include ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel will crash without
'mptcp: clear 'kern' flag from fallback sockets' change.
Since this doesn't slow down testing in a noticeable way,
run this unconditionally.
The explicit test did not catch this, because the check was done
for tcp socket returned by 'socket(.. IPPROTO_TCP) rather than a
tcp socket returned by accept() on a mptcp listen fd.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Synthesize instruction events for every ARM SPE record.
Arm SPE implements a hardware-based sample period, and perf implements a
software-based one. Add a warning message to inform the user of this.
Signed-off-by: German Gomez <german.gomez@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211216152404.52474-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reimplement bpf_probe_large_insn_limit() in bpftool, as that libbpf API
is scheduled for deprecation in v0.8.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211217171202.3352835-4-andrii@kernel.org
Add selftests for prog/map/prog+helper feature probing APIs. Prog and
map selftests are designed in such a way that they will always test all
the possible prog/map types, based on running kernel's vmlinux BTF enum
definition. This way we'll always be sure that when adding new BPF
program types or map types, libbpf will be always updated accordingly to
be able to feature-detect them.
BPF prog_helper selftest will have to be manually extended with
interesting and important prog+helper combinations, it's easy, but can't
be completely automated.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211217171202.3352835-3-andrii@kernel.org
Create three extensible alternatives to inconsistently named
feature-probing APIs:
- libbpf_probe_bpf_prog_type() instead of bpf_probe_prog_type();
- libbpf_probe_bpf_map_type() instead of bpf_probe_map_type();
- libbpf_probe_bpf_helper() instead of bpf_probe_helper().
Set up return values such that libbpf can report errors (e.g., if some
combination of input arguments isn't possible to validate, etc), in
addition to whether the feature is supported (return value 1) or not
supported (return value 0).
Also schedule deprecation of those three APIs. Also schedule deprecation
of bpf_probe_large_insn_limit().
Also fix all the existing detection logic for various program and map
types that never worked:
- BPF_PROG_TYPE_LIRC_MODE2;
- BPF_PROG_TYPE_TRACING;
- BPF_PROG_TYPE_LSM;
- BPF_PROG_TYPE_EXT;
- BPF_PROG_TYPE_SYSCALL;
- BPF_PROG_TYPE_STRUCT_OPS;
- BPF_MAP_TYPE_STRUCT_OPS;
- BPF_MAP_TYPE_BLOOM_FILTER.
Above prog/map types needed special setups and detection logic to work.
Subsequent patch adds selftests that will make sure that all the
detection logic keeps working for all current and future program and map
types, avoiding otherwise inevitable bit rot.
[0] Closes: https://github.com/libbpf/libbpf/issues/312
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Julia Kartseva <hex@fb.com>
Link: https://lore.kernel.org/bpf/20211217171202.3352835-2-andrii@kernel.org
The SGX selftest fails to build on tip/x86/sgx:
main.c: In function ‘get_total_epc_mem’:
main.c:296:17: error: implicit declaration of function ‘__cpuid’ [-Werror=implicit-function-declaration]
296 | __cpuid(&eax, &ebx, &ecx, &edx);
| ^~~~~~~
Include cpuid.h and use __cpuid_count() macro in order to fix the
compilation issue.
[ dhansen: tweak commit message ]
Fixes: f0ff2447b8 ("selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20211204202355.23005-1-jarkko@kernel.org
Cc: Shuah Khan <shuah@kernel.org>
Use '-o' within [] in order to avoid spawning two processes for test.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add a set of tests for the new gpio-sim module. This is a pure shell
test-suite and uses the helper programs available in the gpio selftests
directory. These test-cases only test the functionalities exposed by the
gpio-sim driver, not those handled by core gpiolib code.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Add a simple program that allows to read GPIO line names from the
character device. This will be used in gpio-sim selftests.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Add a simple program that allows to retrieve chip properties from the
GPIO character device. This will be used in gpio-sim selftests.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
- Fix printk() usage during recursion (Ard Biesheuvel)
- Fix rodata section to actually have contents (Christophe Leroy)
- Add notes about lkdtm_kernel_info usage (Kees Cook)
- Avoid stack-entropy selftest when LKDTM is disabled (Misono Tomohiro)
-----BEGIN PGP SIGNATURE-----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=JLZP
-----END PGP SIGNATURE-----
Merge tag 'lkdtm-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-next
Kees writes:
lkdtm updates for v5.17-rc1
- Fix printk() usage during recursion (Ard Biesheuvel)
- Fix rodata section to actually have contents (Christophe Leroy)
- Add notes about lkdtm_kernel_info usage (Kees Cook)
- Avoid stack-entropy selftest when LKDTM is disabled (Misono Tomohiro)
* tag 'lkdtm-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftest/lkdtm: Skip stack-entropy test if lkdtm is not available
lkdtm: Fix content of section containing lkdtm_rodata_do_nothing()
lkdtm: avoid printk() in recursive_loop()
lkdtm: Note that lkdtm_kernel_info should be removed in the future
Current release - regressions:
- dpaa2-eth: fix buffer overrun when reporting ethtool statistics
Current release - new code bugs:
- bpf: fix incorrect state pruning for <8B spill/fill
- iavf:
- add missing unlocks in iavf_watchdog_task()
- do not override the adapter state in the watchdog task (again)
- mlxsw: spectrum_router: consolidate MAC profiles when possible
Previous releases - regressions:
- mac80211, fix:
- rate control, avoid driver crash for retransmitted frames
- regression in SSN handling of addba tx
- a memory leak where sta_info is not freed
- marking TX-during-stop for TX in in_reconfig, prevent stall
- cfg80211: acquire wiphy mutex on regulatory work
- wifi drivers: fix build regressions and LED config dependency
- virtio_net: fix rx_drops stat for small pkts
- dsa: mv88e6xxx: unforce speed & duplex in mac_link_down()
Previous releases - always broken:
- bpf, fix:
- kernel address leakage in atomic fetch
- kernel address leakage in atomic cmpxchg's r0 aux reg
- signed bounds propagation after mov32
- extable fixup offset
- extable address check
- mac80211:
- fix the size used for building probe request
- send ADDBA requests using the tid/queue of the aggregation
session
- agg-tx: don't schedule_and_wake_txq() under sta->lock,
avoid deadlocks
- validate extended element ID is present
- mptcp:
- never allow the PM to close a listener subflow (null-defer)
- clear 'kern' flag from fallback sockets, prevent crash
- fix deadlock in __mptcp_push_pending()
- inet_diag: fix kernel-infoleak for UDP sockets
- xsk: do not sleep in poll() when need_wakeup set
- smc: avoid very long waits in smc_release()
- sch_ets: don't remove idle classes from the round-robin list
- netdevsim:
- zero-initialize memory for bpf map's value, prevent info leak
- don't let user space overwrite read only (max) ethtool parms
- ixgbe: set X550 MDIO speed before talking to PHY
- stmmac:
- fix null-deref in flower deletion w/ VLAN prio Rx steering
- dwmac-rk: fix oob read in rk_gmac_setup
- ice: time stamping fixes
- systemport: add global locking for descriptor life cycle
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=VIbd
-----END PGP SIGNATURE-----
Merge tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from mac80211, wifi, bpf.
Relatively large batches of fixes from BPF and the WiFi stack, calm in
general networking.
Current release - regressions:
- dpaa2-eth: fix buffer overrun when reporting ethtool statistics
Current release - new code bugs:
- bpf: fix incorrect state pruning for <8B spill/fill
- iavf:
- add missing unlocks in iavf_watchdog_task()
- do not override the adapter state in the watchdog task (again)
- mlxsw: spectrum_router: consolidate MAC profiles when possible
Previous releases - regressions:
- mac80211 fixes:
- rate control, avoid driver crash for retransmitted frames
- regression in SSN handling of addba tx
- a memory leak where sta_info is not freed
- marking TX-during-stop for TX in in_reconfig, prevent stall
- cfg80211: acquire wiphy mutex on regulatory work
- wifi drivers: fix build regressions and LED config dependency
- virtio_net: fix rx_drops stat for small pkts
- dsa: mv88e6xxx: unforce speed & duplex in mac_link_down()
Previous releases - always broken:
- bpf fixes:
- kernel address leakage in atomic fetch
- kernel address leakage in atomic cmpxchg's r0 aux reg
- signed bounds propagation after mov32
- extable fixup offset
- extable address check
- mac80211:
- fix the size used for building probe request
- send ADDBA requests using the tid/queue of the aggregation
session
- agg-tx: don't schedule_and_wake_txq() under sta->lock, avoid
deadlocks
- validate extended element ID is present
- mptcp:
- never allow the PM to close a listener subflow (null-defer)
- clear 'kern' flag from fallback sockets, prevent crash
- fix deadlock in __mptcp_push_pending()
- inet_diag: fix kernel-infoleak for UDP sockets
- xsk: do not sleep in poll() when need_wakeup set
- smc: avoid very long waits in smc_release()
- sch_ets: don't remove idle classes from the round-robin list
- netdevsim:
- zero-initialize memory for bpf map's value, prevent info leak
- don't let user space overwrite read only (max) ethtool parms
- ixgbe: set X550 MDIO speed before talking to PHY
- stmmac:
- fix null-deref in flower deletion w/ VLAN prio Rx steering
- dwmac-rk: fix oob read in rk_gmac_setup
- ice: time stamping fixes
- systemport: add global locking for descriptor life cycle"
* tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (89 commits)
bpf, selftests: Fix racing issue in btf_skc_cls_ingress test
selftest/bpf: Add a test that reads various addresses.
bpf: Fix extable address check.
bpf: Fix extable fixup offset.
bpf, selftests: Add test case trying to taint map value pointer
bpf: Make 32->64 bounds propagation slightly more robust
bpf: Fix signed bounds propagation after mov32
sit: do not call ipip6_dev_free() from sit_init_net()
net: systemport: Add global locking for descriptor lifecycle
net/smc: Prevent smc_release() from long blocking
net: Fix double 0x prefix print in SKB dump
virtio_net: fix rx_drops stat for small pkts
dsa: mv88e6xxx: fix debug print for SPEED_UNFORCED
sfc_ef100: potential dereference of null pointer
net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup
net: usb: lan78xx: add Allied Telesis AT29M2-AF
net/packet: rx_owner_map depends on pg_vec
netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc
dpaa2-eth: fix ethtool statistics
ixgbe: set X550 MDIO speed before talking to PHY
...
Daniel Borkmann says:
====================
pull-request: bpf 2021-12-16
We've added 15 non-merge commits during the last 7 day(s) which contain
a total of 12 files changed, 434 insertions(+), 30 deletions(-).
The main changes are:
1) Fix incorrect verifier state pruning behavior for <8B register spill/fill,
from Paul Chaignon.
2) Fix x86-64 JIT's extable handling for fentry/fexit when return pointer
is an ERR_PTR(), from Alexei Starovoitov.
3) Fix 3 different possibilities that BPF verifier missed where unprivileged
could leak kernel addresses, from Daniel Borkmann.
4) Fix xsk's poll behavior under need_wakeup flag, from Magnus Karlsson.
5) Fix an oob-write in test_verifier due to a missed MAX_NR_MAPS bump,
from Kumar Kartikeya Dwivedi.
6) Fix a race in test_btf_skc_cls_ingress selftest, from Martin KaFai Lau.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Fix racing issue in btf_skc_cls_ingress test
selftest/bpf: Add a test that reads various addresses.
bpf: Fix extable address check.
bpf: Fix extable fixup offset.
bpf, selftests: Add test case trying to taint map value pointer
bpf: Make 32->64 bounds propagation slightly more robust
bpf: Fix signed bounds propagation after mov32
bpf, selftests: Update test case for atomic cmpxchg on r0 with pointer
bpf: Fix kernel address leakage in atomic cmpxchg's r0 aux reg
bpf, selftests: Add test case for atomic fetch on spilled pointer
bpf: Fix kernel address leakage in atomic fetch
selftests/bpf: Fix OOB write in test_verifier
xsk: Do not sleep in poll() when need_wakeup set
selftests/bpf: Tests for state pruning with u32 spill/fill
bpf: Fix incorrect state pruning for <8B spill/fill
====================
Link: https://lore.kernel.org/r/20211216210005.13815-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The libbpf CI reported occasional failure in btf_skc_cls_ingress:
test_syncookie:FAIL:Unexpected syncookie states gen_cookie:80326634 recv_cookie:0
bpf prog error at line 97
"error at line 97" means the bpf prog cannot find the listening socket
when the final ack is received. It then skipped processing
the syncookie in the final ack which then led to "recv_cookie:0".
The problem is the userspace program did not do accept() and went
ahead to close(listen_fd) before the kernel (and the bpf prog) had
a chance to process the final ack.
The fix is to add accept() call so that the userspace will wait for
the kernel to finish processing the final ack first before close()-ing
everything.
Fixes: 9a856cae22 ("bpf: selftest: Add test_btf_skc_cls_ingress")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211216191630.466151-1-kafai@fb.com
Add a function to bpf_testmod that returns invalid kernel and user addresses.
Then attach an fexit program to that function that tries to read
memory through these addresses.
This logic checks that bpf_probe_read_kernel and BPF_PROBE_MEM logic is sane.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cross building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS. Clear CROSS_COMPILE for bpftool
and the host libbpf, and use the clang flags for urandom_read and bench.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-7-jean-philippe@linaro.org
Cross-building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS. Add them to CFLAGS, and erase
CROSS_COMPILE for the bpftool build, since it needs to be executed on
the host.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-6-jean-philippe@linaro.org
Cross-building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS, and adds that to CFLAGS. Remove
the cross flags for the bootstrap bpftool, and erase the CROSS_COMPILE
flag for the bootstrap libbpf.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-5-jean-philippe@linaro.org
Cross-building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS. Add them to the CFLAGS.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-4-jean-philippe@linaro.org
The CROSS_COMPILE variable may be present during resolve_btfids build if
the kernel is being cross-built. Since resolve_btfids is always executed
on the host, we set CC to HOSTCC in order to use the host toolchain when
cross-building with GCC. But instead of a toolchain prefix, cross-build
with clang uses a "-target" parameter, which Makefile.include deduces
from the CROSS_COMPILE variable. In order to avoid cross-building
libbpf, clear CROSS_COMPILE before building resolve_btfids.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-3-jean-philippe@linaro.org
Cross-compilation with clang uses the -target parameter rather than a
toolchain prefix. Just like the kernel Makefile, add that parameter to
CFLAGS when CROSS_COMPILE is set.
Unlike the kernel Makefile, we use the --sysroot and --gcc-toolchain
options because unlike the kernel, tools require standard libraries.
Commit c91d4e47e1 ("Makefile: Remove '--gcc-toolchain' flag") provides
some background about --gcc-toolchain. Normally clang finds on its own
the additional utilities and libraries that it needs (for example GNU ld
or glibc). On some systems however, this autodetection doesn't work.
There, our only recourse is asking GCC directly, and pass the result to
--sysroot and --gcc-toolchain. Of course that only works when a cross
GCC is available.
Autodetection worked fine on Debian, but to use the aarch64-linux-gnu
toolchain from Archlinux I needed both --sysroot (for crt1.o) and
--gcc-toolchain (for crtbegin.o, -lgcc). The --prefix parameter wasn't
needed there, but it might be useful on other distributions.
Use the CLANG_CROSS_FLAGS variable instead of CLANG_FLAGS because it
allows tools such as bpftool, that need to build both host and target
binaries, to easily filter out the cross-build flags from CFLAGS.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-2-jean-philippe@linaro.org
In Linux next commit 5504f67944 ("perf test sigtrap: Add basic
stress test for sigtrap handling") introduced the new test which uses
breakpoint events. These events are not supported on s390 and PowerPC
and always fail:
# perf test -F 73
73: Sigtrap : FAILED!
#
Fix it the same way as in the breakpoint tests in file
tests/bp_account.c where these type of tests are skipped on s390 and
PowerPC platforms.
With this patch skip this test on both platforms.
Output after:
# perf test -F 73
73: Sigtrap
#
Fixes: 5504f67944 ("perf test sigtrap: Add basic stress test for sigtrap handling")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20211216151454.752066-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The signal setup code and evlist__prepare_workload() can be used for
other subcommands. Let's move them out of the __cmd_ftrace(). Then
it doesn't need to pass argc and argv.
On the other hand, select_tracer() is specific to the 'trace'
subcommand so it'd better moving it into the __cmd_ftrace().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211215185154.360314-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The registers for ARM and ARM64 are enumerated using two enums that have
the same name. In order to be able to import both headers, the name of
one can be replaced using the C preprocessor like so:
#define perf_event_arm_regs perf_event_arm64_regs
#include <asm/perf_regs.h>
#undef perf_event_arm_regs
This patch updates all imports of ARM64's perf_regs.h in order to
prevent the naming collision.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20211207180653.1147374-3-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactors code for gathering PID infos, it creates the function
nsinfo__get_nspid() to parse process 'status' node in folder '/proc'.
Base on the refactoring, this patch introduces a new helper
nsinfo__is_in_root_namespace(), it returns true when the caller runs in
the root PID namespace.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211212134721.1721245-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a spelling mistake in a __T_VERBOSE message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211212222122.478537-1-colin.i.king@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use IS_ERR_OR_NULL() to make the code cleaner.
Also if the priv is NULL, it's improper to call PTR_ERR(priv).
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: unlisted-recipients
Link: http://lore.kernel.org/lkml/20211212135613.20000-1-linmq006@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are two checks, one is for size when running without admin, but
this one is covered by the driver and reported on in more detail here
(builtin-record.c):
pr_err("Permission error mapping pages.\n"
"Consider increasing "
"/proc/sys/kernel/perf_event_mlock_kb,\n"
"or try again with a smaller value of -m/--mmap_pages.\n"
"(current value: %u,%u)\n",
This had the effect of artificially limiting the aux buffer size to a
value smaller than what was allowed because perf_event_mlock_kb wasn't
taken into account.
The second is to check for a power of two, but this is covered here
(evlist.c):
pr_info("rounding mmap pages size to %s (%lu pages)\n",
buf, pages);
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211208115435.610101-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A previous commit adds pmu events into the files
armv8-common-and-microarch.json
armv8-recommended.json
that are actually specified in an armv9 reference supplement, not armv8.
As such, naming the files with the armv8 prefix seems artificial.
This patch renames the files to reflect that these two files are for
arch std events regardless of whether they are defined in armv8 or
armv9.
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211210123706.7490-3-andrew.kilroy@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Updates the common and microarch json file to add counters available in
the Arm Neoverse N2 chip, but should also apply to other ArmV8 and ArmV9
cpus. Specified in ArmV8 architecture reference manual
https://developer.arm.com/documentation/ddi0487/gb/?lang=en
Some of the counters added to armv8-common-and-microarch.json are
specified in the ArmV9 architecture reference manual supplement
(issue A.a):
https://developer.arm.com/documentation/ddi0608/aa
The additional ArmV9 counters are
TRB_WRAP
TRCEXTOUT0
TRCEXTOUT1
TRCEXTOUT2
TRCEXTOUT3
CTI_TRIGOUT4
CTI_TRIGOUT5
CTI_TRIGOUT6
CTI_TRIGOUT7
This patch also adds files in pmu-events/arch/arm64/arm/neoverse-n2 for
perf list to output the counter names in categories.
Counters on the Neoverse N2 are stated in its reference manual:
https://developer.arm.com/documentation/102099/0000
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211210123706.7490-2-andrew.kilroy@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use total latency info in the SPE counter packet as sample weight so
that we can see it in local_weight and (global) weight sort keys.
Maybe we can use PERF_SAMPLE_WEIGHT_STRUCT to support ins_lat as well
but I'm not sure which latency it matches. So just adding total latency
first.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211201220855.1260688-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The output of 'perf bench' gets buffered when I pipe it to a file or to
tee, in such a way that I can see it only at the end.
E.g.
$ perf bench internals synthesize -t
< output comes out fine after each test run >
$ perf bench internals synthesize -t | tee file.txt
< output comes out only at the end of all tests >
This patch resolves this issue for 'bench' and 'test' subcommands.
See, also:
$ perf bench mem all | tee file.txt
$ perf bench sched all | tee file.txt
$ perf bench internals all -t | tee file.txt
$ perf bench internals all | tee file.txt
Committer testing:
It really gets staggered, i.e. outputs in bursts, when the buffer fills
up and has to be drained to make up space for more output.
Suggested-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211119061409.78004-1-sohaib.amhmd@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By flushing the output, iio_event_monitor can be more useful to programs
chained along with it.
iio_event_monitor stk3310 | awk '/rising/{system("my_unlockscreen.sh")} /falling/{system("my_lockscreen.sh")}'
Without this flush, the above example would buffer a number of events,
then after a while run the lock/unlock scripts several times.
Signed-off-by: Zach DeCook <zachdecook@librem.one>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Mitigation patching test iterates over a set of mitigations irrespective
of whether a certain mitigation is supported/available in the kernel.
This causes following messages on a kernel where some mitigations
are unavailable:
Spawned threads enabling/disabling mitigations ...
cat: entry_flush: No such file or directory
cat: uaccess_flush: No such file or directory
Waiting for timeout ...
OK
This patch adds a check for available mitigations in the kernel.
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/163941374362.36967.18016981579099073379.sendpatchset@1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa
The --jobs parameter for kunit_tool currently defaults to 8 CPUs,
regardless of the number available. For systems with significantly more
(or less), this is not as efficient. Instead, default --jobs to the
number of CPUs available to the process: while there are as many
superstitions as to exactly what the ideal jobs:CPU ratio is, this seems
sufficiently sensible to me.
A new helper function to get the default number of jobs is added:
get_default_jobs() -- this is used in kunit_tool_test instead of a
hardcoded value, or an explicit call to len(os.sched_getaffinity()), so
should be more flexible if this needs to change in the future.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
After upgrading mypy and pytype from pip, we see 2 new errors when
running ./tools/testing/kunit/run_checks.py.
Error #1: mypy and pytype
They now deduce that importlib.util.spec_from_file_location() can return
None and note that we're not checking for this.
We validate that the arch is valid (i.e. the file exists) beforehand.
Add in an `asssert spec is not None` to appease the checkers.
Error #2: pytype bug https://github.com/google/pytype/issues/1057
It doesn't like `from datetime import datetime`, specifically that a
type shares a name with a module.
We can workaround this by either
* renaming the import or just using `import datetime`
* passing the new `--fix-module-collisions` flag to pytype.
We pick the first option for now because
* the flag is quite new, only in the 2021.11.29 release.
* I'd prefer if people can just run `pytype <file>`
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If I created a kunitconfig file that was incomplete, then
$ ./tools/testing/kunit/kunit.py build --kunitconfig=my_kunitconfig
would silently drop all the options with unmet dependencies!
This is because it doesn't do the config check that `kunit.py config`
does.
So if I want to safely build a kernel for testing, I have to do
$ ./tools/testing/kunit/kunit.py config <flags>
$ ./tools/testing/kunit/kunit.py build <flags, again>
It seems unlikely that any user of kunit.py would want the current
`build` semantics.
So make it effectively do `kunit.py config` + `kunit.py build`.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The `log` field is unused, and the `status` field is accessible via
`test.status`.
So it's simpler to just return the main `Test` object directly.
And since we're no longer returning a namedtuple, which has no type
annotations, this hopefully means typecheckers are better equipped to
find any errors.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
namedtuple is a terse way of defining a collection of fields.
However, it does not allow us to annotate the type of these fields.
It also doesn't let us have any sort of inheritance between types.
Since commit df4b0807ca ("kunit: tool: Assert the version
requirement"), kunit.py has asserted that it's running on python >=3.7.
So in that case use a 3.7 feature, dataclasses, to replace these.
Changes in detail:
* Make KunitExecRequest contain all the fields needed for exec_tests
* Use inheritance to dedupe fields
* also allows us to e.g. pass a KUnitRequest in as a KUnitParseRequest
* this has changed around the order of some fields
* Use named arguments when constructing all request objects in kunit.py
* This is to prevent accidentally mixing up fields, etc.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Recently the kbuild robot reported two new errors:
>> lib/kunit/kunit-example-test.o: warning: objtool: .text.unlikely: unexpected end of section
>> arch/x86/kernel/dumpstack.o: warning: objtool: oops_end() falls through to next function show_opcodes()
I don't know why they did not occur in my test setup but after digging
it I realized I had accidentally dropped a comma in
tools/objtool/check.c when I renamed rewind_stack_do_exit to
rewind_stack_and_make_dead.
Add that comma back to fix objtool errors.
Link: https://lkml.kernel.org/r/202112140949.Uq5sFKR1-lkp@intel.com
Fixes: 0e25498f8c ("exit: Add and use make_task_dead.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Currently, there is a test case to verify that VxLAN with IPv6 underlay
is forbidden.
Remove this test case as support for VxLAN with IPv6 underlay was added
by the previous patch.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix possible read beyond ELF "license" data section if the license
string is not properly zero-terminated. Use the fact that libbpf_strlcpy
never accesses the (N-1)st byte of the source string because it's
replaced with '\0' anyways.
If this happens, it's a violation of contract between libbpf and a user,
but not handling this more robustly upsets CIFuzz, so given the fix is
trivial, let's fix the potential issue.
Fixes: 9fc205b413 ("libbpf: Add sane strncpy alternative and use it internally")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211214232054.3458774-1-andrii@kernel.org
Fix up unprivileged test case results for 'Dest pointer in r0' verifier tests
given they now need to reject R0 containing a pointer value, and add a couple
of new related ones with 32bit cmpxchg as well.
root@foo:~/bpf/tools/testing/selftests/bpf# ./test_verifier
#0/u invalid and of negative number OK
#0/p invalid and of negative number OK
[...]
#1268/p XDP pkt read, pkt_meta' <= pkt_data, bad access 1 OK
#1269/p XDP pkt read, pkt_meta' <= pkt_data, bad access 2 OK
#1270/p XDP pkt read, pkt_data <= pkt_meta', good access OK
#1271/p XDP pkt read, pkt_data <= pkt_meta', bad access 1 OK
#1272/p XDP pkt read, pkt_data <= pkt_meta', bad access 2 OK
Summary: 1900 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test whether unprivileged would be able to leak the spilled pointer either
by exporting the returned value from the atomic{32,64} operation or by reading
and exporting the value from the stack after the atomic operation took place.
Note that for unprivileged, the below atomic cmpxchg test case named "Dest
pointer in r0 - succeed" is failing. The reason is that in the dst memory
location (r10 -8) there is the spilled register r10:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (bf) r0 = r10
1: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (7b) *(u64 *)(r10 -8) = r0
2: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0 fp-8_w=fp
2: (b7) r1 = 0
3: R0_w=fp0 R1_w=invP0 R10=fp0 fp-8_w=fp
3: (db) r0 = atomic64_cmpxchg((u64 *)(r10 -8), r0, r1)
4: R0_w=fp0 R1_w=invP0 R10=fp0 fp-8_w=mmmmmmmm
4: (79) r1 = *(u64 *)(r0 -8)
5: R0_w=fp0 R1_w=invP(id=0) R10=fp0 fp-8_w=mmmmmmmm
5: (b7) r0 = 0
6: R0_w=invP0 R1_w=invP(id=0) R10=fp0 fp-8_w=mmmmmmmm
6: (95) exit
However, allowing this case for unprivileged is a bit useless given an
update with a new pointer will fail anyway:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (bf) r0 = r10
1: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (7b) *(u64 *)(r10 -8) = r0
2: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0 fp-8_w=fp
2: (db) r0 = atomic64_cmpxchg((u64 *)(r10 -8), r0, r10)
R10 leaks addr into mem
Acked-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_obj__find_program_by_title() in libbpf is going to be deprecated.
Call bpf_object_for_each_program to find a program in the section with
a given name instead.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211214035931.1148209-4-kuifeng@fb.com
bpf_object__find_program_by_title is going to be deprecated. Replace
all use cases in tools/testing/selftests/bpf with
bpf_object__find_program_by_name or bpf_object__for_each_program.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211214035931.1148209-2-kuifeng@fb.com
As libbpf now is able to automatically take care of RLIMIT_MEMLOCK
increase (or skip it altogether on recent enough kernels), remove
explicit setrlimit() invocations in bench, test_maps, test_verifier, and
test_progs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211214195904.1785155-3-andrii@kernel.org
The need to increase RLIMIT_MEMLOCK to do anything useful with BPF is
one of the first extremely frustrating gotchas that all new BPF users go
through and in some cases have to learn it a very hard way.
Luckily, starting with upstream Linux kernel version 5.11, BPF subsystem
dropped the dependency on memlock and uses memcg-based memory accounting
instead. Unfortunately, detecting memcg-based BPF memory accounting is
far from trivial (as can be evidenced by this patch), so in practice
most BPF applications still do unconditional RLIMIT_MEMLOCK increase.
As we move towards libbpf 1.0, it would be good to allow users to forget
about RLIMIT_MEMLOCK vs memcg and let libbpf do the sensible adjustment
automatically. This patch paves the way forward in this matter. Libbpf
will do feature detection of memcg-based accounting, and if detected,
will do nothing. But if the kernel is too old, just like BCC, libbpf
will automatically increase RLIMIT_MEMLOCK on behalf of user
application ([0]).
As this is technically a breaking change, during the transition period
applications have to opt into libbpf 1.0 mode by setting
LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK bit when calling
libbpf_set_strict_mode().
Libbpf allows to control the exact amount of set RLIMIT_MEMLOCK limit
with libbpf_set_memlock_rlim_max() API. Passing 0 will make libbpf do
nothing with RLIMIT_MEMLOCK. libbpf_set_memlock_rlim_max() has to be
called before the first bpf_prog_load(), bpf_btf_load(), or
bpf_object__load() call, otherwise it has no effect and will return
-EBUSY.
[0] Closes: https://github.com/libbpf/libbpf/issues/369
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211214195904.1785155-2-andrii@kernel.org
Since it's likely to be useful for performance work with SVE let's have a
pidbench that gives us some numbers for consideration. In order to ensure
that we test exactly the scenario we want this is written in assembly - if
system libraries use SVE this would stop us exercising the case where the
process has never used SVE.
We exercise three cases:
- Never having used SVE.
- Having used SVE once.
- Using SVE after each syscall.
by spinning running getpid() for a fixed number of iterations with the
time measured using CNTVCT_EL0 reported on the console. This is obviously
a totally unrealistic benchmark which will show the extremes of any
performance variation but equally given the potential gotchas with use of
FP instructions by system libraries it's good to have some concrete code
shared to make it easier to compare notes on results.
Testing over multiple SVE vector lengths will need to be done with vlset
currently, the test could be extended to iterate over all of them if
desired.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211202165107.1075259-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we don't have any coverage of the syscall ABI so let's add a very
dumb test program which sets up register patterns, does a sysscall and then
checks that the register state after the syscall matches what we expect.
The program is written in an extremely simplistic fashion with the goal of
making it easy to verify that it's doing what it thinks it's doing, it is
not a model of how one should write actual code.
Currently we validate the general purpose, FPSIMD and SVE registers. There
are other thing things that could be covered like FPCR and flags registers,
these can be covered incrementally - my main focus at the minute is
covering the ABI for the SVE registers.
The program repeats the tests for all possible SVE vector lengths in case
some vector length specific optimisation causes issues, as well as testing
FPSIMD only. It tries two syscalls, getpid() and sched_yield(), in an
effort to cover both immediate return to userspace and scheduling another
task though there are no guarantees which cases will be hit.
A new test directory "abi" is added to hold the test, it doesn't seem to
fit well into any of the existing directories.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210184133.320748-7-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we have the facility to specify custom code to trigger a signal
but none of the tests use it and for some reason the framework requires us
to also specify a signal to send as a trigger in order to make use of a
custom trigger. This doesn't seem to make much sense, instead allow the
use of a custom trigger function without specifying a signal to inject.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210184133.320748-6-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
SME introduces a new mode called streaming mode in which the SVE registers
have a different vector length. Since the ptrace interface for this is
based on the existing SVE interface prepare for supporting this by moving
the regset specific configuration into struct and passing that around,
allowing these tests to be reused for streaming mode. As we will also have
to verify the interoperation of the SVE and streaming SVE regsets don't
just iterate over an array.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210184133.320748-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
strncpy() has a notoriously error-prone semantics which makes GCC
complain about it a lot (and quite often completely completely falsely
at that). Instead of pleasing GCC all the time (-Wno-stringop-truncation
is unfortunately only supported by GCC, so it's a bit too messy to just
enable it in Makefile), add libbpf-internal libbpf_strlcpy() helper
which follows what FreeBSD's strlcpy() does and what most people would
expect from strncpy(): copies up to N-1 first bytes from source string
into destination string and ensures zero-termination afterwards.
Replace all the relevant uses of strncpy/strncat/memcpy in libbpf with
libbpf_strlcpy().
This also fixes the issue reported by Emmanuel Deloget in xsk.c where
memcpy() could access source string beyond its end.
Fixes: 2f6324a393 (libbpf: Support shared umems between queues and devices)
Reported-by: Emmanuel Deloget <emmanuel.deloget@eho.link>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211211004043.2374068-1-andrii@kernel.org
In case of BPF_CORE_TYPE_ID_LOCAL we fill out target result explicitly.
But targ_res itself isn't initialized in such a case, and subsequent
call to bpf_core_patch_insn() might read uninitialized field (like
fail_memsz_adjust in this case). So ensure that targ_res is
zero-initialized for BPF_CORE_TYPE_ID_LOCAL case.
This was reported by Coverity static analyzer.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211214010032.3843804-1-andrii@kernel.org
The commit referenced below added fixup_map_timer support (to create a
BPF map containing timers), but failed to increase the size of the
map_fds array, leading to out of bounds write. Fix this by changing
MAX_NR_MAPS to 22.
Fixes: e60e6962c5 ("selftests/bpf: Add tests for restricted helpers")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211214014800.78762-1-memxor@gmail.com
Add a test case to cover the bug fixed by the previous patch.
Edit the MAC address of one netdev so that it matches the MAC address of
the second netdev. Verify that the two MAC profiles were consolidated by
testing that the MAC profiles occupancy decreased by one.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit ad9a7f9644 ("libbpf: Improve logging around BPF program
loading"), libbpf_debug_print() gets an additional prog_name parameter
but doesn't pass it to printf(). Since the format string now expects two
arguments, printf() may read uninitialized data and segfault. Pass
prog_name through.
Fixes: ad9a7f9644 ("libbpf: Improve logging around BPF program loading")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211213183058.346066-1-jean-philippe@linaro.org
kunit.py isn't very clear that
1) it stashes a copy of the unparsed output in $BUILD_DIR/test.log
2) it sets $BUILD_DIR=.kunit by default
So it's trickier than it should be for a user to come up with the right
command to do so.
Make kunit.py print out a command for this if
a) we saw a test case crash
b) we only ran one kernel (test.log only contains output from the last)
Example suggested command:
$ scripts/decode_stacktrace.sh .kunit/vmlinux .kunit < .kunit/test.log | tee .kunit/decoded.log | ./tools/testing/kunit/kunit.py parse
Without debug info a user might see something like
[14:11:25] Call Trace:
[14:11:25] ? kunit_binary_assert_format (:?)
[14:11:25] kunit_try_run_case (test.c:?)
[14:11:25] ? __kthread_parkme (kthread.c:?)
[14:11:25] kunit_generic_run_threadfn_adapter (try-catch.c:?)
[14:11:25] ? kunit_generic_run_threadfn_adapter (try-catch.c:?)
[14:11:25] kthread (kthread.c:?)
[14:11:25] new_thread_handler (:?)
[14:11:25] [CRASHED]
`tee` is in GNU coreutils, so it seems fine to add that into the
pipeline by default, that way users can inspect the otuput in more
detail.
Note: to turn on debug info, users would need to do something like
$ echo -e 'CONFIG_DEBUG_KERNEL=y\nCONFIG_DEBUG_INFO=y' >> .kunit/.kunitconfig
$ ./tools/testing/kunit/kunit.py config
$ ./tools/testing/kunit/kunit.py build
$ <then run decode_stacktrace.sh now vmlinux is updated>
This feels too clunky to include in the instructions.
With --kconfig_add [1], it would become a bit less painful.
[1] https://lore.kernel.org/linux-kselftest/20211106013058.2621799-2-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Problem: currently, if you remove something from your kunitconfig,
kunit.py will not regenerate the .config file.
The same thing happens if you did --kunitconfig_add=CONFIG_KASAN=y [1]
and then ran again without it. Your new run will still have KASAN.
The reason is that kunit.py won't regenerate the .config file if it's a
superset of the kunitconfig. This speeds it up a bit for iterating.
This patch adds an additional check that forces kunit.py to regenerate
the .config file if the current kunitconfig doesn't match the previous
one.
What this means:
* deleting entries from .kunitconfig works as one would expect
* dropping a --kunitconfig_add also triggers a rebuild
* you can still edit .config directly to turn on new options
We implement this by creating a `last_used_kunitconfig` file in the
build directory (so .kunit, by default) after we generate the .config.
When comparing the kconfigs, we compare python sets, so duplicates and
permutations don't trip us up.
The majority of this patch is adding unit tests for the existing logic
and for the new case where `last_used_kunitconfig` differs.
[1] https://lore.kernel.org/linux-kselftest/20211106013058.2621799-2-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The current error message is precise, but not very clear if you don't
already know what it's talking about, e.g.
> $ make ARCH=um olddefconfig O=.kunit
> ERROR:root:Provided Kconfig is not contained in validated .config. Following fields found in kunitconfig, but not in .config: CONFIG_DRM=y
Try to reword the error message so that it's
* your missing options usually have unsatisified dependencies
* if you're on UML, that might be the cause (it is, in this example)
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
E.g. run tests but with KASAN
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 --kconfig_add=CONFIG_KASAN=y
This also works with --kunitconfig
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 --kunitconfig=fs/ext4 --kconfig_add=CONFIG_KASAN=y
This flag is inspired by TuxMake's --kconfig-add, see
https://gitlab.com/Linaro/tuxmake#examples.
Our version just uses "_" as the delimiter for consistency with
pre-existing flags like --build_dir, --make_options, --kernel_args, etc.
Note: this does make it easier to run into a pre-existing edge case:
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 --kconfig_add=CONFIG_KASAN=y
$ ./tools/testing/kunit/kunit.py run --arch=x86_64
This second invocation ^ still has KASAN enabled!
kunit.py won't call olddefconfig if our current .config is already a
superset of the provided kunitconfig.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
read_from_file() clears its `self` Kconfig object and parses a config
file.
It is a way to construct Kconfig objects more so than an operation on
Kconfig objects. This is reflected in the fact its only ever used as:
kconfig = kunit_config.Kconfig()
kconfig.read_from_file(path)
So clean this up and simplify callers by replacing it with
kconfig = kunit_config.parse_file(path)
Do the same thing for the related parse_from_string() function as well.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
With the parser rework [1] and run_kernel() rework [2], this allows the
parser to print out test results incrementally.
Currently, that's held up by the fact that the LineStream eagerly
pre-fetches the next line when you call pop().
This blocks parse_test_result() from returning until the line *after*
the "ok 1 - test name" line is also printed.
One can see this with the following example:
$ (echo -e 'TAP version 14\n1..3\nok 1 - fake test'; sleep 2; echo -e 'ok 2 - fake test 2'; sleep 3; echo -e 'ok 3 - fake test 3') | ./tools/testing/kunit/kunit.py parse
Before this patch [1]: there's a pause before 'fake test' is printed.
After this patch: 'fake test' is printed out immediately.
This patch also adds
* a unit test to verify LineStream's behavior directly
* a test case to ensure that it's lazily calling the generator
* an explicit exception for when users go beyond EOF
[1] https://lore.kernel.org/linux-kselftest/20211006170049.106852-1-dlatypov@google.com/
[2] https://lore.kernel.org/linux-kselftest/20211005011340.2826268-1-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It's possible for a test to have a subtest header, but zero valid
subtests. We used to error on this if the test plan had no subtests
listed, but it's possible to have subtests without a test plan (indeed,
this is how parameterised tests work).
Tests with 0 subtests now have the result NO_TESTS, and will report an
error (which does not halt test execution, but is printed in a scary red
colour and is noted in the results summary).
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The (K)TAP spec encourages test output to begin with a 'test plan': a
count of the number of tests being run of the form:
1..n
However, some test suites might not know the number of subtests in
advance (for example, KUnit's parameterised tests use a generator
function). In this case, it's not possible to print the test plan in
advance.
kunit_tool already parses test output which doesn't contain a plan, but
reports an error. Since we want to use nested subtests with KUnit
paramterised tests, remove this error.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This formalizes the checks KUnit maintainers have been running (or in
other cases: forgetting to run).
This script also runs them all in parallel to minimize friction (pytype
can be fairly slow, but not slower than running kunit.py).
Example output:
$ ./tools/testing/kunit/run_checks.py
Waiting on 4 checks (kunit_tool_test.py, kunit smoke test, pytype, mypy)...
kunit_tool_test.py: PASSED
mypy: PASSED
pytype: PASSED
kunit smoke test: PASSED
On failure or timeout (5 minutes), it'll dump out the stdout/stderr.
E.g. adding in a type-checking error:
mypy: FAILED
> kunit.py:54: error: Name 'nonexistent_function' is not defined
> Found 1 error in 1 file (checked 8 source files)
mypy and pytype are two Python type-checkers and must be installed.
This file treats them as optional and will mark them as SKIPPED if not
installed.
This tool also runs `kunit.py run --kunitconfig=lib/kunit` to run
KUnit's own KUnit tests and to verify KUnit kernel code and kunit.py
play nicely together.
It uses --build_dir=kunit_run_checks so as not to clobber the default
build_dir, which helps make it faster by reducing the need to rebuild,
esp. if you're been passing in --arch instead of using UML.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, KUnit will report SKIPPED tests as having failed if one uses
--json.
Add the missing if statement to set the appropriate status ("SKIP").
See https://api.kernelci.org/schema-test-case.html:
"status": {
"type": "string",
"description": "The status of the execution of this test case",
"enum": ["PASS", "FAIL", "SKIP", "ERROR"],
"default": "PASS"
},
with this, we now can properly produce all four of the statuses.
Fixes: 5acaf6031f ("kunit: tool: Support skipped tests in kunit_tool")
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Update complete_and_exit to call kthread_exit instead of do_exit.
Change the name to reflect this change in functionality. All of the
users of complete_and_exit are causing the current kthread to exit so
this change makes it clear what is happening.
Move the implementation of kthread_complete_and_exit from
kernel/exit.c to to kernel/kthread.c. As this function is kthread
specific it makes most sense to live with the kthread functions.
There are no functional change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Update module_put_and_exit to call kthread_exit instead of do_exit.
Change the name to reflect this change in functionality. All of the
users of module_put_and_exit are causing the current kthread to exit
so this change makes it clear what is happening. There is no
functional change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The way the per task_struct exit_code is used by kernel threads is not
quite compatible how it is used by userspace applications. The low
byte of the userspace exit_code value encodes the exit signal. While
kthreads just use the value as an int holding ordinary kernel function
exit status like -EPERM.
Add kthread_exit to clearly separate the two kinds of uses.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.
Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.
Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.
As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Adding tests for get_func_[arg|ret|arg_cnt] helpers.
Using these helpers in fentry/fexit/fmod_ret programs.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211208193245.172141-6-jolsa@kernel.org
Adding following helpers for tracing programs:
Get n-th argument of the traced function:
long bpf_get_func_arg(void *ctx, u32 n, u64 *value)
Get return value of the traced function:
long bpf_get_func_ret(void *ctx, u64 *value)
Get arguments count of the traced function:
long bpf_get_func_arg_cnt(void *ctx)
The trampoline now stores number of arguments on ctx-8
address, so it's easy to verify argument index and find
return value argument's position.
Moving function ip address on the trampoline stack behind
the number of functions arguments, so it's now stored on
ctx-16 address if it's needed.
All helpers above are inlined by verifier.
Also bit unrelated small change - using newly added function
bpf_prog_has_trampoline in check_get_func_ip.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211208193245.172141-5-jolsa@kernel.org
Adding verifier test for accessing int pointer argument in
tracing programs.
The test program loads 2nd argument of bpf_modify_return_test
function which is int pointer and checks that verifier allows
that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211208193245.172141-3-jolsa@kernel.org
The recent GRE selftests defined NUM_NETIFS=10. If the users copy
forwarding.config.sample to forwarding.config directly, they will get
error "Command line is not complete" when run the GRE tests, because
create_netif_veth() failed with no interface name defined.
Fix it by extending the NETIFS with p9 and p10.
Fixes: 2800f24854 ("selftests: forwarding: Test multipath hashing on inner IP pkts for GRE tunnel")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test is currently run on a single host with private addresses,
either over veth or by setting a nic in loopback mode with macvlan.
Support running between two real devices. Allow overriding addresses.
Also cut timeout to fail faster on error and explicitly log success.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tiny fix. Option -u ("use udp") does not take an argument.
It can cause the next argument to silently be ignored.
Fixes: 5ebfb4cc30 ("selftests/net: toeplitz test")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During linking, type IDs in the resulting linked BPF object file can
change, and so ldimm64 instructions corresponding to
BPF_CORE_TYPE_ID_TARGET and BPF_CORE_TYPE_ID_LOCAL CO-RE relos can get
their imm value out of sync with actual CO-RE relocation information
that's updated by BPF linker properly during linking process.
We could teach BPF linker to adjust such instructions, but it feels
a bit too much for linker to re-implement good chunk of
bpf_core_patch_insns logic just for this. This is a redundant safety
check for TYPE_ID relocations, as the real validation is in matching
CO-RE specs, so if that works fine, it's very unlikely that there is
something wrong with the instruction itself.
So, instead, teach libbpf (and kernel) to ignore insn->imm for
BPF_CORE_TYPE_ID_TARGET and BPF_CORE_TYPE_ID_LOCAL relos.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211213010706.100231-1-andrii@kernel.org
bpf_create_map_xattr() call was reintroduced after merging bpf tree into
bpf-next tree. Convert the last instance into bpf_map_create() call.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211212191341.2529573-1-andrii@kernel.org
IPv6 allows binding a socket to a device then binding to an address
not on the device (__inet6_bind -> ipv6_chk_addr with strict flag
not set). Update the bind tests to reflect legacy behavior.
Fixes: 34d0302ab8 ("selftests: Add ipv6 address bind tests to fcnal-test")
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit referenced below added negative socket bind tests for VRF. The
socket binds should fail since the address to bind to is in a VRF yet
the socket is not bound to the VRF or a device within it. Update the
expected return code to check for 1 (bind failure) so the test passes
when the bind fails as expected. Add a 'show_hint' comment to explain
why the bind is expected to fail.
Fixes: 75b2b2b3db ("selftests: Add ipv4 address bind tests to fcnal-test")
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit referenced below added configuration in the default VRF that
duplicates a VRF to check MD5 passwords are properly used and fail
when expected. That config should not be added all the time as it
can cause tests to pass that should not (by matching on default VRF
setup when it should not). Move the duplicate setup to a function
that is only called for the MD5 tests and add a cleanup function
to remove it after the MD5 tests.
Fixes: 5cad8bce26 ("fcnal-test: Add TCP MD5 tests for VRF")
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If any sub-test in this icmp_redirect.sh is failing but not expected
to fail. The script will complain:
./icmp_redirect.sh: line 72: [: 1: unary operator expected
This is because when the sub-test is not expected to fail, we won't
pass any value for the xfail local variable in log_test() and thus
it's empty. Fix this by passing 0 as the 4th variable to log_test()
for non-xfail cases.
v2: added fixes tag
Fixes: 0a36a75c68 ("selftests: icmp_redirect: support expected failures")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As mentined by Takashi Sakamoto, the system-wide alsa-lib configuration
may override the standard device declarations. This patch use the private
alsa-lib configuration to set the predictable environment.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20211208095209.1772296-1-perex@perex.cz
[Restructure version test to keep the preprocessor happy -- broonie]
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210185410.740009-4-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The volatile attribute of control element means that the hardware can
voluntarily change the state of control element independent of any
operation by software. ALSA control core necessarily sends notification
to userspace subscribers for any change from userspace application, while
it doesn't for the hardware's voluntary change.
This commit adds optimization for the attribute. Even if read value is
different from written value, the test reports success as long as the
target control element has the attribute. On the other hand, the
difference is itself reported for developers' convenience.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/Ya7TAHdMe9i41bsC@workstation
[Fix comment style as suggested by Shuah -- broonie]
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210185410.740009-3-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a basic test for the mixer control interface. For every control on
every sound card in the system it checks that it can read and write the
default value where the control supports that and for writeable controls
attempts to write all valid values, restoring the default values after
each test to minimise disruption for users.
There are quite a few areas for improvement - currently no coverage of the
generation of notifications, several of the control types don't have any
coverage for the values and we don't have any testing of error handling
when we attempt to write out of range values - but this provides some basic
coverage.
This is added as a kselftest since unlike other ALSA test programs it does
not require either physical setup of the device or interactive monitoring
by users and kselftest is one of the test suites that is frequently run by
people doing general automated testing so should increase coverage. It is
written in terms of alsa-lib since tinyalsa is not generally packaged for
distributions which makes things harder for general users interested in
kselftest as a whole but it will be a barrier to people with Android.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211210185410.740009-2-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Four test cases are added:
(1) ensure the return value is expected
(2) ensure no const string size is rejected
(3) ensure writable target is rejected
(4) ensure no null-terminated target is rejected
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211210141652.877186-5-houtao1@huawei.com
Fix checkpatch error: "ERROR: Bad function definition - void foo()
should probably be void foo(void)". Most replacements are done by
the following command:
sed -i 's#\([a-z]\)()$#\1(void)#g' testing/selftests/bpf/benchs/*.c
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211210141652.877186-3-houtao1@huawei.com
The helper compares two strings: one string is a null-terminated
read-only string, and another string has const max storage size
but doesn't need to be null-terminated. It can be used to compare
file name in tracing or LSM program.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211210141652.877186-2-houtao1@huawei.com
libbpf's obj->nr_programs includes static and global functions. That number
could be higher than the actual number of bpf programs going be loaded by
gen_loader. Passing larger nr_programs to bpf_gen__init() doesn't hurt. Those
exra stack slots will stay as zero. bpf_gen__finish() needs to check that
actual number of progs that gen_loader saw is less than or equal to
obj->nr_programs.
Fixes: ba05fd36b8 ("libbpf: Perform map fd cleanup for gen_loader in case of error")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Prevent out-of-bounds access to per sample registers.
- Fix NULL vs IS_ERR_OR_NULL() checking on the python binding.
- Intel PT fixes, half of those are one-liners:
- Fix some PGE (packet generation enable/control flow packets) usage.
- Fix sync state when a PSB (synchronization) packet is found.
- Fix intel_pt_fup_event() assumptions about setting state type.
- Fix state setting when receiving overflow (OVF) packet.
- Fix next 'err' value, walking trace.
- Fix missing 'instruction' events with 'q' option.
- Fix error timestamp setting on the decoder error path.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYbTE4gAKCRCyPKLppCJ+
JyuQAQC6hgdIIY+1aXlTer4OKep8AdnH5y6q1GLxcNX0UX/iUgD+OjxBFiFk50Ix
jCWFjM1rsDHLJbPZmztRX4IxNHFJzAg=
=ZkBH
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.16-2021-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Prevent out-of-bounds access to per sample registers.
- Fix NULL vs IS_ERR_OR_NULL() checking on the python binding.
- Intel PT fixes, half of those are one-liners:
- Fix some PGE (packet generation enable/control flow packets) usage.
- Fix sync state when a PSB (synchronization) packet is found.
- Fix intel_pt_fup_event() assumptions about setting state type.
- Fix state setting when receiving overflow (OVF) packet.
- Fix next 'err' value, walking trace.
- Fix missing 'instruction' events with 'q' option.
- Fix error timestamp setting on the decoder error path.
* tag 'perf-tools-fixes-for-v5.16-2021-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf python: Fix NULL vs IS_ERR_OR_NULL() checking
perf intel-pt: Fix error timestamp setting on the decoder error path
perf intel-pt: Fix missing 'instruction' events with 'q' option
perf intel-pt: Fix next 'err' value, walking trace
perf intel-pt: Fix state setting when receiving overflow (OVF) packet
perf intel-pt: Fix intel_pt_fup_event() assumptions about setting state type
perf intel-pt: Fix sync state when a PSB (synchronization) packet is found
perf intel-pt: Fix some PGE (packet generation enable/control flow packets) usage
perf tools: Prevent out-of-bounds access to registers
Merge misc fixes from Andrew Morton:
"21 patches.
Subsystems affected by this patch series: MAINTAINERS, mailmap, and mm
(mlock, pagecache, damon, slub, memcg, hugetlb, and pagecache)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits)
mm: bdi: initialize bdi_min_ratio when bdi is unregistered
hugetlbfs: fix issue of preallocation of gigantic pages can't work
mm/memcg: relocate mod_objcg_mlstate(), get_obj_stock() and put_obj_stock()
mm/slub: fix endianness bug for alloc/free_traces attributes
selftests/damon: split test cases
selftests/damon: test debugfs file reads/writes with huge count
selftests/damon: test wrong DAMOS condition ranges input
selftests/damon: test DAMON enabling with empty target_ids case
selftests/damon: skip test if DAMON is running
mm/damon/vaddr-test: remove unnecessary variables
mm/damon/vaddr-test: split a test function having >1024 bytes frame size
mm/damon/vaddr: remove an unnecessary warning message
mm/damon/core: remove unnecessary error messages
mm/damon/dbgfs: remove an unnecessary error message
mm/damon/core: use better timer mechanisms selection threshold
mm/damon/core: fix fake load reports due to uninterruptible sleeps
timers: implement usleep_idle_range()
filemap: remove PageHWPoison check from next_uptodate_page()
mailmap: update email address for Guo Ren
MAINTAINERS: update kdump maintainers
...
The function trace_event__tp_format_id may return ERR_PTR(-ENOMEM). Use
IS_ERR_OR_NULL to check tp_format.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: http://lore.kernel.org/lkml/20211211053856.19827-1-linmq006@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An error timestamp shows the last known timestamp for the queue, but this
is not updated on the error path. Fix by setting it.
Fixes: f4aa081949 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
FUP packets contain IP information, which makes them also an 'instruction'
event in 'hop' mode i.e. the itrace 'q' option. That wasn't happening, so
restructure the logic so that FUP events are added along with appropriate
'instruction' and 'branch' events.
Fixes: 7c1b16ba0e ("perf intel-pt: Add support for decoding FUP/TIP only")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Code after label 'next:' in intel_pt_walk_trace() assumes 'err' is zero,
but it may not be, if arrived at via a 'goto'. Ensure it is zero.
Fixes: 7c1b16ba0e ("perf intel-pt: Add support for decoding FUP/TIP only")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An overflow (OVF packet) is treated as an error because it represents a
loss of trace data, but there is no loss of synchronization, so the packet
state should be INTEL_PT_STATE_IN_SYNC not INTEL_PT_STATE_ERR_RESYNC.
To support that, some additional variables must be reset, and the FUP
packet that may follow OVF is treated as an FUP event.
Fixes: f4aa081949 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
intel_pt_fup_event() assumes it can overwrite the state type if there has
been an FUP event, but this is an unnecessary and unexpected constraint on
callers.
Fix by touching only the state type flags that are affected by an FUP
event.
Fixes: a472e65fc4 ("perf intel-pt: Add decoder support for ptwrite and power event packets")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When syncing, it may be that branch packet generation is not enabled at
that point, in which case there will not immediately be a control-flow
packet, so some packets before a control flow packet turns up, get
ignored. However, the decoder is in sync as soon as a PSB is found, so
the state should be set accordingly.
Fixes: f4aa081949 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Packet generation enable (PGE) refers to whether control flow (COFI)
packets are being produced.
PGE may be false even when branch-tracing is enabled, due to being
out-of-context, or outside a filter address range. Fix some missing PGE
usage.
Fixes: 7c1b16ba0e ("perf intel-pt: Add support for decoding FUP/TIP only")
Fixes: 839598176b ("perf intel-pt: Allow decoding with branch tracing disabled")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The size of the cache of register values is arch-dependant
(PERF_REGS_MAX). This has the potential of causing an out-of-bounds
access in the function "perf_reg_value" if the local architecture
contains less registers than the one the perf.data file was recorded on.
Since the maximum number of registers is bound by the bitmask "u64
cache_mask", and the size of the cache when running under x86 systems is
64 already, fix the size to 64 and add a range-check to the function
"perf_reg_value" to prevent out-of-bounds access.
Reported-by: Alexandre Truong <alexandre.truong@arm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20211201123334.679131-2-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This code puts an exception table entry on the PREFETCH instruction to
overwrite it with a JMP.d8 when it triggers an exception. Except of
course, our code is no longer writable, also SMP.
Instead of fixing this broken mess, simply take it out.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/YZKQzUmeNuwyvZpk@hirez.programming.kicks-ass.net
Currently, the single test program, debugfs.sh, contains all test cases
for DAMON. When one of the cases fails, finding which case is failed
from the test log is not so easy, and all remaining tests will be
skipped. To improve the situation, this commit splits the single
program into small test programs having their own names.
Link: https://lkml.kernel.org/r/20211201150440.1088-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
DAMON debugfs interface users were able to trigger warning by writing
some files with arbitrarily large 'count' parameter. The issue is fixed
with commit db7a347b26 ("mm/damon/dbgfs: use '__GFP_NOWARN' for
user-specified size buffer allocation"). This commit adds a test case
for the issue in DAMON selftests to avoid future regressions.
Link: https://lkml.kernel.org/r/20211201150440.1088-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
DAMON debugfs didn't check empty targets when starting monitoring, and
the issue is fixed with commit b5ca3e83dd ("mm/damon/dbgfs: add
adaptive_targets list check before enable monitor_on"). To avoid future
regression, this commit adds a test case for that in DAMON selftests.
Link: https://lkml.kernel.org/r/20211201150440.1088-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Testing the DAMON debugfs files while DAMON is running makes no sense,
as any write to the debugfs files will fail. This commit makes the test
be skipped in this case.
Link: https://lkml.kernel.org/r/20211201150440.1088-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from vm tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from timens tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ARRAY_SIZE is defined in several selftests. Remove definition from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from adi-test and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from seccomp_benchmark and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from rseq tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from net tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from common.h and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from ir_loopback.c and pickup the one defined
in kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from close_range_test.c and pickup the one defined
in kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from cgroup_util.h and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from vec-syscfg.c and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
tools/include/linux/kernel.h and kselftest_harness.h are missing
ifndef guard around ARRAY_SIZE define. Fix them to avoid duplicate
define errors during compile when another file defines it. This
problem was found when compiling selftests that include a header
with ARRAY_SIZE define.
ARRAY_SIZE is defined in several selftests. There are about 25+
duplicate defines in various selftests source and header files.
Add ARRAY_SIZE to kselftest.h in preparation for removing duplicate
ARRAY_SIZE defines from individual test files.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Andrii Nakryiko says:
====================
bpf-next 2021-12-10 v2
We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).
The main changes are:
1) Various samples fixes, from Alexander Lobakin.
2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.
3) A batch of new unified APIs for libbpf, logging improvements, version
querying, etc. Also a batch of old deprecations for old APIs and various
bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.
4) BPF documentation reorganization and improvements, from Christoph Hellwig
and Dave Tucker.
5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
libbpf, from Hengqi Chen.
6) Verifier log fixes, from Hou Tao.
7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.
8) Extend branch record capturing to all platforms that support it,
from Kajol Jain.
9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.
10) bpftool doc-generating script improvements, from Quentin Monnet.
11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.
12) Deprecation warning fix for perf/bpf_counter, from Song Liu.
13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
from Tiezhu Yang.
14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.
15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
and others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
libbpf: Add "bool skipped" to struct bpf_map
libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
selftests/bpf: Add test for libbpf's custom log_buf behavior
selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
libbpf: Deprecate bpf_object__load_xattr()
libbpf: Add per-program log buffer setter and getter
libbpf: Preserve kernel error code and remove kprobe prog type guessing
libbpf: Improve logging around BPF program loading
libbpf: Allow passing user log setting through bpf_object_open_opts
libbpf: Allow passing preallocated log_buf when loading BTF into kernel
libbpf: Add OPTS-based bpf_btf_load() API
libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
samples/bpf: Remove unneeded variable
bpf: Remove redundant assignment to pointer t
selftests/bpf: Fix a compilation warning
perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
samples: bpf: Fix 'unknown warning group' build warning on Clang
samples: bpf: Fix xdp_sample_user.o linking with Clang
...
====================
Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building selftests/cgroup: with clang the following error are seen:
clang -Wall -pthread test_memcontrol.c cgroup_util.c ../clone3/clone3_selftests.h -o .../builds/current/kselftest/cgroup/test_memcontrol
clang: error: cannot specify -o when generating multiple output files
make[3]: *** [../lib.mk:146: .../builds/current/kselftest/cgroup/test_memcontrol] Error 1
Rework to add the header files to LOCAL_HDRS before including ../lib.mk,
since the dependency is evaluated in '$(OUTPUT)/%:%.c $(LOCAL_HDRS)' in
file lib.mk.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The coccinelle report
./tools/testing/selftests/move_mount_set_group/move_mount_set_group_test.c:225:18-23:
WARNING: conversion to bool not needed here
Relational and logical operators evaluate to bool,
explicit conversion is overly verbose and unneeded.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The coccinelle report
./tools/testing/selftests/mount/unprivileged-remount-test.c:285:54-59:
WARNING: conversion to bool not needed here
./tools/testing/selftests/mount/unprivileged-remount-test.c:207:54-59:
WARNING: conversion to bool not needed here
Relational and logical operators evaluate to bool,
explicit conversion is overly verbose and unneeded.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Test can fail either immediately when ASSERT() failed or at the
end if one or more EXPECT() was not met. The exact return code
is decided based on the number of successful ASSERT()s.
If test has no ASSERT()s, however, the return code will be 0,
as if the test did not fail. Start counting ASSERT()s from 1.
Fixes: 369130b631 ("selftests: Enhance kselftest_harness.h to print which assert failed")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 32f6e5da83 ("selftests/ftrace: Add kprobe profile testcase")
added a new kprobes testcase, but has a description which does not
describe what the test case is doing and is duplicating the description
of another test case.
Therefore change the test case description, so it is unique and then
allows easily to tell which test case actually passed or failed.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Building selftests/clone3 with clang warns about enumeration not handled
in switch case:
clone3.c:54:10: warning: enumeration value 'CLONE3_ARGS_NO_TEST' not handled in switch [-Wswitch]
switch (test_mode) {
^
Add the missing switch case with a comment.
Fixes: 17a810699c ("selftests: add tests for clone3()")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix error: "failed to pin map: Bad file descriptor, path:
/sys/fs/bpf/_rodata_str1_1."
In the old kernel, the global data map will not be created, see [0]. So
we should skip the pinning of the global data map to avoid
bpf_object__pin_maps returning error. Therefore, when the map is not
created, we mark “map->skipped" as true and then check during relocation
and during pinning.
Fixes: 16e0c35c6f ("libbpf: Load global data maps lazily on legacy kernels")
Signed-off-by: Shuyi Cheng <chengshuyi@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The btf__dedup_deprecated name was misspelled in the definition of the
compat symbol for btf__dedup. This leads it to be missing from the
shared library.
This fixes it.
Fixes: 957d350a8b ("libbpf: Turn btf_dedup_opts into OPTS-based struct")
Signed-off-by: Vincent Minet <vincent@vincent-minet.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211210063112.80047-1-vincent@vincent-minet.net
Switch all the uses of to-be-deprecated bpf_object__load_xattr() into
a simple bpf_object__load() calls with optional log_level passed through
open_opts.kernel_log_level, if -d option is specified.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-13-andrii@kernel.org
Switch from bpf_object__load_xattr() to bpf_object__load() and
kernel_log_level in bpf_object_open_opts.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-12-andrii@kernel.org
Add a selftest that validates that per-program and per-object log_buf
overrides work as expected. Also test same logic for low-level
bpf_prog_load() and bpf_btf_load() APIs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-11-andrii@kernel.org
Deprecate non-extensible bpf_object__load_xattr() in v0.8 ([0]).
With log_level control through bpf_object_open_opts or
bpf_program__set_log_level(), we are finally at the point where
bpf_object__load_xattr() doesn't provide any functionality that can't be
accessed through other (better) ways. The other feature,
target_btf_path, is also controllable through bpf_object_open_opts.
[0] Closes: https://github.com/libbpf/libbpf/issues/289
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-9-andrii@kernel.org
Allow to set user-provided log buffer on a per-program basis ([0]). This
gives great deal of flexibility in terms of which programs are loaded
with logging enabled and where corresponding logs go.
Log buffer set with bpf_program__set_log_buf() overrides kernel_log_buf
and kernel_log_size settings set at bpf_object open time through
bpf_object_open_opts, if any.
Adjust bpf_object_load_prog_instance() logic to not perform own log buf
allocation and load retry if custom log buffer is provided by the user.
[0] Closes: https://github.com/libbpf/libbpf/issues/418
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-8-andrii@kernel.org
Instead of rewriting error code returned by the kernel of prog load with
libbpf-sepcific variants pass through the original error.
There is now also no need to have a backup generic -LIBBPF_ERRNO__LOAD
fallback error as bpf_prog_load() guarantees that errno will be properly
set no matter what.
Also drop a completely outdated and pretty useless BPF_PROG_TYPE_KPROBE
guess logic. It's not necessary and neither it's helpful in modern BPF
applications.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-7-andrii@kernel.org
Add missing "prog '%s': " prefixes in few places and use consistently
markers for beginning and end of program load logs. Here's an example of
log output:
libbpf: prog 'handler': BPF program load failed: Permission denied
libbpf: -- BEGIN PROG LOAD LOG ---
arg#0 reference type('UNKNOWN ') size cannot be determined: -22
; out1 = in1;
0: (18) r1 = 0xffffc9000cdcc000
2: (61) r1 = *(u32 *)(r1 +0)
...
81: (63) *(u32 *)(r4 +0) = r5
R1_w=map_value(id=0,off=16,ks=4,vs=20,imm=0) R4=map_value(id=0,off=400,ks=4,vs=16,imm=0)
invalid access to map value, value_size=16 off=400 size=4
R4 min value is outside of the allowed memory range
processed 63 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
-- END PROG LOAD LOG --
libbpf: failed to load program 'handler'
libbpf: failed to load object 'test_skeleton'
The entire verifier log, including BEGIN and END markers are now always
youtput during a single print callback call. This should make it much
easier to post-process or parse it, if necessary. It's not an explicit
API guarantee, but it can be reasonably expected to stay like that.
Also __bpf_object__open is renamed to bpf_object_open() as it's always
an adventure to find the exact function that implements bpf_object's
open phase, so drop the double underscored and use internal libbpf
naming convention.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-6-andrii@kernel.org
Allow users to provide their own custom log_buf, log_size, and log_level
at bpf_object level through bpf_object_open_opts. This log_buf will be
used during BTF loading. Subsequent patch will use same log_buf during
BPF program loading, unless overriden at per-bpf_program level.
When such custom log_buf is provided, libbpf won't be attempting
retrying loading of BTF to try to provide its own log buffer to capture
kernel's error log output. User is responsible to provide big enough
buffer, otherwise they run a risk of getting -ENOSPC error from the
bpf() syscall.
See also comments in bpf_object_open_opts regarding log_level and
log_buf interactions.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-5-andrii@kernel.org
Add libbpf-internal btf_load_into_kernel() that allows to pass
preallocated log_buf and custom log_level to be passed into kernel
during BPF_BTF_LOAD call. When custom log_buf is provided,
btf_load_into_kernel() won't attempt an retry with automatically
allocated internal temporary buffer to capture BTF validation log.
It's important to note the relation between log_buf and log_level, which
slightly deviates from stricter kernel logic. From kernel's POV, if
log_buf is specified, log_level has to be > 0, and vice versa. While
kernel has good reasons to request such "sanity, this, in practice, is
a bit unconvenient and restrictive for libbpf's high-level bpf_object APIs.
So libbpf will allow to set non-NULL log_buf and log_level == 0. This is
fine and means to attempt to load BTF without logging requested, but if
it failes, retry the load with custom log_buf and log_level 1. Similar
logic will be implemented for program loading. In practice this means
that users can provide custom log buffer just in case error happens, but
not really request slower verbose logging all the time. This is also
consistent with libbpf behavior when custom log_buf is not set: libbpf
first tries to load everything with log_level=0, and only if error
happens allocates internal log buffer and retries with log_level=1.
Also, while at it, make BTF validation log more obvious and follow the log
pattern libbpf is using for dumping BPF verifier log during
BPF_PROG_LOAD. BTF loading resulting in an error will look like this:
libbpf: BTF loading error: -22
libbpf: -- BEGIN BTF LOAD LOG ---
magic: 0xeb9f
version: 1
flags: 0x0
hdr_len: 24
type_off: 0
type_len: 1040
str_off: 1040
str_len: 2063598257
btf_total_size: 1753
Total section length too long
-- END BTF LOAD LOG --
libbpf: Error loading .BTF into kernel: -22. BTF is optional, ignoring.
This makes it much easier to find relevant parts in libbpf log output.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-4-andrii@kernel.org
Similar to previous bpf_prog_load() and bpf_map_create() APIs, add
bpf_btf_load() API which is taking optional OPTS struct. Schedule
bpf_load_btf() for deprecation in v0.8 ([0]).
This makes naming consistent with BPF_BTF_LOAD command, sets up an API
for extensibility in the future, moves options parameters (log-related
fields) into optional options, and also allows to pass log_level
directly.
It also removes log buffer auto-allocation logic from low-level API
(consistent with bpf_prog_load() behavior), but preserves a special
treatment of log_level == 0 with non-NULL log_buf, which matches
low-level bpf_prog_load() and high-level libbpf APIs for BTF and program
loading behaviors.
[0] Closes: https://github.com/libbpf/libbpf/issues/419
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-3-andrii@kernel.org
To unify libbpf APIs behavior w.r.t. log_buf and log_level, fix
bpf_prog_load() to follow the same logic as bpf_btf_load() and
high-level bpf_object__load() API will follow in the subsequent patches:
- if log_level is 0 and non-NULL log_buf is provided by a user, attempt
load operation initially with no log_buf and log_level set;
- if successful, we are done, return new FD;
- on error, retry the load operation with log_level bumped to 1 and
log_buf set; this way verbose logging will be requested only when we
are sure that there is a failure, but will be fast in the
common/expected success case.
Of course, user can still specify log_level > 0 from the very beginning
to force log collection.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-2-andrii@kernel.org
Create the output directory for the ACPI tools during build if it has
not been present before and prevent the compilation from failing in
that case (Chen Yu).
-----BEGIN PGP SIGNATURE-----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=lLS7
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Create the output directory for the ACPI tools during build if it has
not been present before and prevent the compilation from failing in
that case (Chen Yu)"
* tag 'acpi-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: tools: Fix compilation when output directory is not present
* Logic bugs in CR0 writes and Hyper-V hypercalls
* Don't use Enlightened MSR Bitmap for L3
* Remove user-triggerable WARN
Plus a few selftest fixes and a regression test for the
user-triggerable WARN.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGzZuIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMD4Qf+Im7Q0XNRZGzK6x4Blu3ZZJSuIIkW
gEK5mDX/BWSYxoGhRN0IOkyf1Tx/A5qYwbZts87wZSvKONG2MuVzdeQ0mkDxgKc3
cYwvvIPxCKaW/dQLD2OKVlqdAv6YbeJiFURWXgszMkrcgHvw39H5Tn6ldi0B5nvg
Gvpj8LtbPDXGXab//Xrhia3+1F9TKOrcOG+obGC5G2mrGKTkG2+pi9L6LohvENhd
sOSWdpmvQTU4PeqGlhW8RCwcN+vpa+NasHT2i2tHcWZA9Lqp4P81+4ZyQLIBsRB3
psANG0c40EW+lfjFGbLL/6VR5kypxa6zy9RgX+QiRcj6C0+dJOgnwNY35A==
=cREz
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"More x86 fixes:
- Logic bugs in CR0 writes and Hyper-V hypercalls
- Don't use Enlightened MSR Bitmap for L3
- Remove user-triggerable WARN
Plus a few selftest fixes and a regression test for the
user-triggerable WARN"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: KVM: Add test to verify KVM doesn't explode on "bad" I/O
KVM: x86: Don't WARN if userspace mucks with RCX during string I/O exit
KVM: X86: Raise #GP when clearing CR0_PG in 64 bit mode
selftests: KVM: avoid failures due to reserved HyperTransport region
KVM: x86: Ignore sparse banks size for an "all CPUs", non-sparse IPI req
KVM: x86: Wait for IPIs to be delivered when handling Hyper-V TLB flush hypercall
KVM: x86: selftests: svm_int_ctl_test: fix intercept calculation
KVM: nVMX: Don't use Enlightened MSR Bitmap for L3
'sys/ioctl.h' included in 'mptcp_inq.c' is duplicated.
Reported-by: ZealRobot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20211210071424.425773-1-ye.guojin@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds tests for the verifier's tracking for spilled, <8B
registers. The first two test cases ensure the verifier doesn't
incorrectly prune states in case of <8B spill/fills. The last one simply
checks that a filled u64 register is marked unknown if the register
spilled in the same slack slot was less than 8B.
The map value access at the end of the first program is only incorrect
for the path R6=32. If the precision bit for register R8 isn't
backtracked through the u32 spill/fill, the R6=32 path is pruned at
instruction 9 and the program is incorrectly accepted. The second
program is a variation of the same with u32 spills and a u64 fill.
The additional instructions to introduce the first pruning point may be
a bit fragile as they depend on the heuristics for pruning points in the
verifier (currently at least 8 instructions and 2 jumps). If the
heuristics are changed, the pruning point may move (e.g., to the
subsequent jump) or disappear, which would cause the test to always pass.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add an x86 selftest to verify that KVM doesn't WARN or otherwise explode
if userspace modifies RCX during a userspace exit to handle string I/O.
This is a regression test for a user-triggerable WARN introduced by
commit 3b27de2718 ("KVM: x86: split the two parts of emulator_pio_in").
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211025201311.1881846-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD proceessors define an address range that is reserved by HyperTransport
and causes a failure if used for guest physical addresses. Avoid
selftests failures by reserving those guest physical addresses; the
rules are:
- On parts with <40 bits, its fully hidden from software.
- Before Fam17h, it was always 12G just below 1T, even if there was more
RAM above this location. In this case we just not use any RAM above 1T.
- On Fam17h and later, it is variable based on SME, and is either just
below 2^48 (no encryption) or 2^43 (encryption).
Fixes: ef4c9f4f65 ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210805105423.412878-1-pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
./fcnal-test.sh -v -t ipv6_ping
TEST: ping out, VRF bind - ns-B IPv6 LLA [FAIL]
TEST: ping out, VRF bind - multicast IP [FAIL]
ping6 is failing as it should.
COMMAND: ip netns exec ns-A /bin/ping6 -c1 -w1 fe80::7c4c:bcff:fe66:a63a%red
strace of ping6 shows it is failing with '1',
so change the expected rc from 2 to 1.
Fixes: c0644e71df ("selftests: Add ipv6 ping tests to fcnal-test")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jie2x Zhou <jie2x.zhou@intel.com>
Link: https://lore.kernel.org/r/20211209020230.37270-1-jie2x.zhou@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Teach objtool to turn instrumentation required for memory barrier
modeling into nops in noinstr text.
The __tsan_func_entry/exit calls are still emitted by compilers even
with the __no_sanitize_thread attribute. The memory barrier
instrumentation will be inserted explicitly (without compiler help), and
thus needs to also explicitly be removed.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Adds KCSAN's memory barrier instrumentation to objtool's uaccess
whitelist.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Current release - regressions:
- bpf, sockmap: re-evaluate proto ops when psock is removed from sockmap
Current release - new code bugs:
- bpf: fix bpf_check_mod_kfunc_call for built-in modules
- ice: fixes for TC classifier offloads
- vrf: don't run conntrack on vrf with !dflt qdisc
Previous releases - regressions:
- bpf: fix the off-by-two error in range markings
- seg6: fix the iif in the IPv6 socket control block
- devlink: fix netns refcount leak in devlink_nl_cmd_reload()
- dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"
- dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports
Previous releases - always broken:
- ethtool: do not perform operations on net devices being unregistered
- udp: use datalen to cap max gso segments
- ice: fix races in stats collection
- fec: only clear interrupt of handling queue in fec_enet_rx_queue()
- m_can: pci: fix incorrect reference clock rate
- m_can: disable and ignore ELO interrupt
- mvpp2: fix XDP rx queues registering
Misc:
- treewide: add missing includes masked by cgroup -> bpf.h dependency
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=F6rS
-----END PGP SIGNATURE-----
Merge tag 'net-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.
Current release - regressions:
- bpf, sockmap: re-evaluate proto ops when psock is removed from
sockmap
Current release - new code bugs:
- bpf: fix bpf_check_mod_kfunc_call for built-in modules
- ice: fixes for TC classifier offloads
- vrf: don't run conntrack on vrf with !dflt qdisc
Previous releases - regressions:
- bpf: fix the off-by-two error in range markings
- seg6: fix the iif in the IPv6 socket control block
- devlink: fix netns refcount leak in devlink_nl_cmd_reload()
- dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"
- dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports
Previous releases - always broken:
- ethtool: do not perform operations on net devices being
unregistered
- udp: use datalen to cap max gso segments
- ice: fix races in stats collection
- fec: only clear interrupt of handling queue in fec_enet_rx_queue()
- m_can: pci: fix incorrect reference clock rate
- m_can: disable and ignore ELO interrupt
- mvpp2: fix XDP rx queues registering
Misc:
- treewide: add missing includes masked by cgroup -> bpf.h
dependency"
* tag 'net-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
net: dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports
net: wwan: iosm: fixes unable to send AT command during mbim tx
net: wwan: iosm: fixes net interface nonfunctional after fw flash
net: wwan: iosm: fixes unnecessary doorbell send
net: dsa: felix: Fix memory leak in felix_setup_mmio_filtering
MAINTAINERS: s390/net: remove myself as maintainer
net/sched: fq_pie: prevent dismantle issue
net: mana: Fix memory leak in mana_hwc_create_wq
seg6: fix the iif in the IPv6 socket control block
nfp: Fix memory leak in nfp_cpp_area_cache_add()
nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done
nfc: fix segfault in nfc_genl_dump_devices_done
udp: using datalen to cap max gso segments
net: dsa: mv88e6xxx: error handling for serdes_power functions
can: kvaser_usb: get CAN clock frequency from device
can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter
net: mvpp2: fix XDP rx queues registering
vmxnet3: fix minimum vectors alloc issue
net, neigh: clear whole pneigh_entry at alloc time
net: dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"
...
INTERCEPT_x are bit positions, but the code was using the raw value of
INTERCEPT_VINTR (4) instead of BIT(INTERCEPT_VINTR).
This resulted in masking of bit 2 - that is, SMI instead of VINTR.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <49b9571d25588870db5380b0be1a41df4bbaaf93.1638486479.git.maciej.szmigiero@oracle.com>
Clean up remaining headers that are specific to liblockdep but lived in
the shared header directory. These are all unused after the liblockdep
code was removed in commit 7246f4dcac ("tools/lib/lockdep: drop
liblockdep").
Note that there are still headers that were originally created for
liblockdep, that still have liblockdep references, but they are used by
other tools/ code at this point.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A mis-match between reported and actual mitigation is not restricted to the
Vulnerable case. The guest might also report the mitigation as "Software
count cache flush" and the host will still mitigate with branch cache
disabled.
So, instead of skipping depending on the detected mitigation, simply skip
whenever the detected miss_percent is the expected one for a fully
mitigated system, that is, above 95%.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211207130557.40566-1-cascardo@canonical.com
The following warning is triggered when I used clang compiler
to build the selftest.
/.../prog_tests/btf_dedup_split.c:368:6: warning: variable 'btf2' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (!ASSERT_OK(err, "btf_dedup"))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
/.../prog_tests/btf_dedup_split.c:424:12: note: uninitialized use occurs here
btf__free(btf2);
^~~~
/.../prog_tests/btf_dedup_split.c:368:2: note: remove the 'if' if its condition is always false
if (!ASSERT_OK(err, "btf_dedup"))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/.../prog_tests/btf_dedup_split.c:343:25: note: initialize the variable 'btf2' to silence this warning
struct btf *btf1, *btf2;
^
= NULL
Initialize local variable btf2 = NULL and the warning is gone.
Fixes: 9a49afe6f5 ("selftests/bpf: Add btf_dedup case with duplicated structs within CU")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211209050403.1770836-1-yhs@fb.com
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix bogus compilter warning in nfnetlink_queue, from Florian Westphal.
2) Don't run conntrack on vrf with !dflt qdisc, from Nicolas Dichtel.
3) Fix nft_pipapo bucket load in AVX2 lookup routine for six 8-bit
groups, from Stefano Brivio.
4) Break rule evaluation on malformed TCP options.
5) Use socat instead of nc in selftests/netfilter/nft_zones_many.sh,
also from Florian
6) Fix KCSAN data-race in conntrack timeout updates, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: conntrack: annotate data-races around ct->timeout
selftests: netfilter: switch zone stress to socat
netfilter: nft_exthdr: break evaluation if setting TCP option fails
selftests: netfilter: Add correctness test for mac,net set type
nft_set_pipapo: Fix bucket load in AVX2 lookup routine for six 8-bit groups
vrf: don't run conntrack on vrf with !dflt qdisc
netfilter: nfnetlink_queue: silence bogus compiler warning
====================
Link: https://lore.kernel.org/r/20211209000847.102598-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
bpf 2021-12-08
We've added 12 non-merge commits during the last 22 day(s) which contain
a total of 29 files changed, 659 insertions(+), 80 deletions(-).
The main changes are:
1) Fix an off-by-two error in packet range markings and also add a batch of
new tests for coverage of these corner cases, from Maxim Mikityanskiy.
2) Fix a compilation issue on MIPS JIT for R10000 CPUs, from Johan Almbladh.
3) Fix two functional regressions and a build warning related to BTF kfunc
for modules, from Kumar Kartikeya Dwivedi.
4) Fix outdated code and docs regarding BPF's migrate_disable() use on non-
PREEMPT_RT kernels, from Sebastian Andrzej Siewior.
5) Add missing includes in order to be able to detangle cgroup vs bpf header
dependencies, from Jakub Kicinski.
6) Fix regression in BPF sockmap tests caused by missing detachment of progs
from sockets when they are removed from the map, from John Fastabend.
7) Fix a missing "no previous prototype" warning in x86 JIT caused by BPF
dispatcher, from Björn Töpel.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add selftests to cover packet access corner cases
bpf: Fix the off-by-two error in range markings
treewide: Add missing includes masked by cgroup -> bpf dependency
tools/resolve_btfids: Skip unresolved symbol warning for empty BTF sets
bpf: Fix bpf_check_mod_kfunc_call for built-in modules
bpf: Make CONFIG_DEBUG_INFO_BTF depend upon CONFIG_BPF_SYSCALL
mips, bpf: Fix reference to non-existing Kconfig symbol
bpf: Make sure bpf_disable_instrumentation() is safe vs preemption.
Documentation/locking/locktypes: Update migrate_disable() bits.
bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap
bpf, sockmap: Attach map progs to psock early for feature probes
bpf, x86: Fix "no previous prototype" warning
====================
Link: https://lore.kernel.org/r/20211208155125.11826-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bpf_create_map is deprecated. Replace it with bpf_map_create. Also add a
__weak bpf_map_create() so that when older version of libbpf is linked as
a shared library, it falls back to bpf_create_map().
Fixes: 992c422541 ("libbpf: Unify low-level map creation APIs w/ new bpf_map_create()")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211207232340.2561471-1-song@kernel.org
Teach objtool to validate the straight-line-speculation constraints:
- speculation trap after indirect calls
- speculation trap after RET
Notable: when an instruction is annotated RETPOLINE_SAFE, indicating
speculation isn't a problem, also don't care about sls for that
instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134908.023037659@infradead.org
This commit adds BPF verifier selftests that cover all corner cases by
packet boundary checks. Specifically, 8-byte packet reads are tested at
the beginning of data and at the beginning of data_meta, using all kinds
of boundary checks (all comparison operators: <, >, <=, >=; both
permutations of operands: data + length compared to end, end compared to
data + length). For each case there are three tests:
1. Length is just enough for an 8-byte read. Length is either 7 or 8,
depending on the comparison.
2. Length is increased by 1 - should still pass the verifier. These
cases are useful, because they failed before commit 2fa7d94afc
("bpf: Fix the off-by-two error in range markings").
3. Length is decreased by 1 - should be rejected by the verifier.
Some existing tests are just renamed to avoid duplication.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211207081521.41923-1-maximmi@nvidia.com
