There is a bug in ext4_ext_shift_path_extents() where if we actually
manage to merge a extent we would skip shifting the next extent. This
will result in in one extent in the extent tree not being properly
shifted.
This is causing failure in various xfstests tests using fsx or fsstress
with collapse range support. It will also cause file system corruption
which looks something like:
e2fsck 1.42.9 (4-Feb-2014)
Pass 1: Checking inodes, blocks, and sizes
Inode 20 has out of order extents
(invalid logical block 3, physical block 492938, len 2)
Clear? yes
...
when running e2fsck.
It's also very easily reproducible just by running fsx without any
parameters. I can usually hit the problem within a minute.
Fix it by increasing ex_start only if we're not merging the extent.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
Currently in ext4_collapse_range() and ext4_punch_hole() we're
discarding preallocation twice. Once before we attempt to do any changes
and second time after we're done with the changes.
While the second call to ext4_discard_preallocations() in
ext4_punch_hole() case is not needed, we need to discard preallocation
right after ext4_ext_remove_space() in collapse range case because in
the case we had to restart a transaction in the middle of removing space
we might have new preallocations created.
Remove unneeded ext4_discard_preallocations() ext4_punch_hole() and move
it to the better place in ext4_collapse_range()
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We're already calling truncate_pagecache() before we attempt to do any
actual job so there is not need to truncate pagecache once more using
truncate_setsize() after we're finished.
Remove truncate_setsize() and replace it just with i_size_write() note
that we're holding appropriate locks.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently in ext4_collapse_range() when calling ext4_es_remove_extent() to
remove status extents we're passing (EXT_MAX_BLOCKS - punch_start - 1)
in order to remove all extents from start of the collapse range to the
end of the file. However this is wrong because we might miss the
possible extent covering the last block of the file.
Fix it by removing the -1.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
Currently we're passing -1 as lend argumnet for
filemap_write_and_wait_range() which is wrong since lend is signed type
so it would cause some confusion and we might not write_and_wait for the
entire range we're expecting to write.
Fix it by using LLONG_MAX instead.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We should be using truncate_pagecache() instead of
truncate_pagecache_range() in the collapse range because we're
truncating page cache from offset to the end of file.
truncate_pagecache() also get rid of the private COWed pages from the
range because we're going to shift the end of the file.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Where are some places where logic guaranties us that extent we are
searching exits, but this may not be true due to on-disk data
corruption. If such corruption happens we must prevent possible
null pointer dereferences.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Unfortunately, we weren't checking to make sure of this the inode was
extent-based before attempt operate on it. Hilarity ensues.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
This commit tries to fix some byte order issues that is found by sparse
check.
$ make M=fs/ext4 C=2 CF=-D__CHECK_ENDIAN__
...
CHECK fs/ext4/extents.c
fs/ext4/extents.c:5232:41: warning: restricted __le32 degrades to integer
fs/ext4/extents.c:5236:52: warning: bad assignment (-=) to restricted __le32
fs/ext4/extents.c:5258:45: warning: bad assignment (-=) to restricted __le32
fs/ext4/extents.c:5303:28: warning: restricted __le32 degrades to integer
fs/ext4/extents.c:5318:18: warning: incorrect type in assignment (different base types)
fs/ext4/extents.c:5318:18: expected unsigned int [unsigned] [usertype] ex_start
fs/ext4/extents.c:5318:18: got restricted __le32 [usertype] ee_block
fs/ext4/extents.c:5319:24: warning: restricted __le32 degrades to integer
fs/ext4/extents.c:5334:31: warning: incorrect type in assignment (different base types)
...
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently some file system have IS_SWAPFILE check in their fallocate
implementations and some do not. However we should really prevent any
fallocate operation on swapfile so move the check to vfs and remove the
redundant checks from the file systems fallocate implementations.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently in do_fallocate in collapse range case we're checking
whether offset + len is not bigger than i_size. However there is
nothing which would prevent i_size from changing so the check is
pointless. It should be done in the file system itself and the file
system needs to make sure that i_size is not going to change. The
i_size check for the other fallocate modes are also done in the
filesystems.
As it is now we can easily crash the kernel by having two processes
doing truncate and fallocate collapse range at the same time. This
can be reproduced on ext4 and it is theoretically possible on xfs even
though I was not able to trigger it with this simple test.
This commit removes the check from do_fallocate and adds it to the
file system.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
All the checks IS_APPEND and IS_IMMUTABLE for the fallocate operation on
the inode are done in vfs. No need to do this again in ext4. Remove it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function ext4_update_i_disksize() is used in only one place, in
the function mpage_map_and_submit_extent(). Move its code to simplify
the code paths, and also move the call to ext4_mark_inode_dirty() into
the i_data_sem's critical region, to be consistent with all of the
other places where we update i_disksize. That way, we also keep the
raw_inode's i_disksize protected, to avoid the following race:
CPU #1 CPU #2
down_write(&i_data_sem)
Modify i_disk_size
up_write(&i_data_sem)
down_write(&i_data_sem)
Modify i_disk_size
Copy i_disk_size to on-disk inode
up_write(&i_data_sem)
Copy i_disk_size to on-disk inode
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Return ENOMEM rather than EIO when find_get_page() fails in
ext4_mb_get_buddy_page_lock() and find_or_create_page() fails in
ext4_mb_load_buddy().
Signed-off-by: Younger Liu <younger.liucn@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When mounting ext4 with data=journal option, xfstest shared/002 and
shared/004 are currently failing as checksum computed for testfile
does not match with the checksum computed in other journal modes.
In case of data=journal mode, a call to filemap_write_and_wait_range
will not flush anything to disk as buffers are not marked dirty in
write_end. In collapse range this call is followed by a call to
truncate_pagecache_range. Due to this, when checksum is computed,
a portion of file is re-read from disk which replace valid data with
NULL bytes and hence the reason for the difference in checksum.
Calling ext4_force_commit before filemap_write_and_wait_range solves
the issue as it will mark the buffers dirty during commit transaction
which can be later synced by a call to filemap_write_and_wait_range.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The special handling of PF_MEMALLOC callers in ext4_write_inode()
shouldn't be necessary as there shouldn't be any. Warn about it. Also
update comment before the function as it seems somewhat outdated.
(Changes modeled on an ext3 patch posted by Jan Kara to the linux-ext4
mailing list on Februaryt 28, 2014, which apparently never went into
the ext3 tree.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
When heavily exercising xattr code the assertion that
jbd2_journal_dirty_metadata() shouldn't return error was triggered:
WARNING: at /srv/autobuild-ceph/gitbuilder.git/build/fs/jbd2/transaction.c:1237
jbd2_journal_dirty_metadata+0x1ba/0x260()
CPU: 0 PID: 8877 Comm: ceph-osd Tainted: G W 3.10.0-ceph-00049-g68d04c9 #1
Hardware name: Dell Inc. PowerEdge R410/01V648, BIOS 1.6.3 02/07/2011
ffffffff81a1d3c8 ffff880214469928 ffffffff816311b0 ffff880214469968
ffffffff8103fae0 ffff880214469958 ffff880170a9dc30 ffff8802240fbe80
0000000000000000 ffff88020b366000 ffff8802256e7510 ffff880214469978
Call Trace:
[<ffffffff816311b0>] dump_stack+0x19/0x1b
[<ffffffff8103fae0>] warn_slowpath_common+0x70/0xa0
[<ffffffff8103fb2a>] warn_slowpath_null+0x1a/0x20
[<ffffffff81267c2a>] jbd2_journal_dirty_metadata+0x1ba/0x260
[<ffffffff81245093>] __ext4_handle_dirty_metadata+0xa3/0x140
[<ffffffff812561f3>] ext4_xattr_release_block+0x103/0x1f0
[<ffffffff81256680>] ext4_xattr_block_set+0x1e0/0x910
[<ffffffff8125795b>] ext4_xattr_set_handle+0x38b/0x4a0
[<ffffffff810a319d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff81257b32>] ext4_xattr_set+0xc2/0x140
[<ffffffff81258547>] ext4_xattr_user_set+0x47/0x50
[<ffffffff811935ce>] generic_setxattr+0x6e/0x90
[<ffffffff81193ecb>] __vfs_setxattr_noperm+0x7b/0x1c0
[<ffffffff811940d4>] vfs_setxattr+0xc4/0xd0
[<ffffffff8119421e>] setxattr+0x13e/0x1e0
[<ffffffff811719c7>] ? __sb_start_write+0xe7/0x1b0
[<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60
[<ffffffff8118c65c>] ? fget_light+0x3c/0x130
[<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60
[<ffffffff8118f1f8>] ? __mnt_want_write+0x58/0x70
[<ffffffff811946be>] SyS_fsetxattr+0xbe/0x100
[<ffffffff816407c2>] system_call_fastpath+0x16/0x1b
The reason for the warning is that buffer_head passed into
jbd2_journal_dirty_metadata() didn't have journal_head attached. This is
caused by the following race of two ext4_xattr_release_block() calls:
CPU1 CPU2
ext4_xattr_release_block() ext4_xattr_release_block()
lock_buffer(bh);
/* False */
if (BHDR(bh)->h_refcount == cpu_to_le32(1))
} else {
le32_add_cpu(&BHDR(bh)->h_refcount, -1);
unlock_buffer(bh);
lock_buffer(bh);
/* True */
if (BHDR(bh)->h_refcount == cpu_to_le32(1))
get_bh(bh);
ext4_free_blocks()
...
jbd2_journal_forget()
jbd2_journal_unfile_buffer()
-> JH is gone
error = ext4_handle_dirty_xattr_block(handle, inode, bh);
-> triggers the warning
We fix the problem by moving ext4_handle_dirty_xattr_block() under the
buffer lock. Sadly this cannot be done in nojournal mode as that
function can call sync_dirty_buffer() which would deadlock. Luckily in
nojournal mode the race is harmless (we only dirty already freed buffer)
and thus for nojournal mode we leave the dirtying outside of the buffer
lock.
Reported-by: Sage Weil <sage@inktank.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
ext4_end_bio() currently throws away the error that it receives. Chances
are this is part of a spate of errors, one of which will end up getting
the error returned to userspace somehow, but we shouldn't take that risk.
Also print out the errno to aid in debug.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
With EXT4FS_DEBUG ext4_count_free_clusters() will call
ext4_read_block_bitmap() without s_group_info initialized, so we need to
initialize multi-block allocator before.
And dependencies that must be solved, to allow this:
- multi-block allocator needs in group descriptors
- need to install s_op before initializing multi-block allocator,
because in ext4_mb_init_backend() new inode is created.
- initialize number of group desc blocks (s_gdb_count) otherwise
number of clusters returned by ext4_free_clusters_after_init() is not correct.
(see ext4_bg_num_gdb_nometa())
Here is the stack backtrace:
(gdb) bt
#0 ext4_get_group_info (group=0, sb=0xffff880079a10000) at ext4.h:2430
#1 ext4_validate_block_bitmap (sb=sb@entry=0xffff880079a10000,
desc=desc@entry=0xffff880056510000, block_group=block_group@entry=0,
bh=bh@entry=0xffff88007bf2b2d8) at balloc.c:358
#2 0xffffffff81232202 in ext4_wait_block_bitmap (sb=sb@entry=0xffff880079a10000,
block_group=block_group@entry=0,
bh=bh@entry=0xffff88007bf2b2d8) at balloc.c:476
#3 0xffffffff81232eaf in ext4_read_block_bitmap (sb=sb@entry=0xffff880079a10000,
block_group=block_group@entry=0) at balloc.c:489
#4 0xffffffff81232fc0 in ext4_count_free_clusters (sb=sb@entry=0xffff880079a10000) at balloc.c:665
#5 0xffffffff81259ffa in ext4_check_descriptors (first_not_zeroed=<synthetic pointer>,
sb=0xffff880079a10000) at super.c:2143
#6 ext4_fill_super (sb=sb@entry=0xffff880079a10000, data=<optimized out>,
data@entry=0x0 <irq_stack_union>, silent=silent@entry=0) at super.c:3851
...
Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we try to get 2^32-1 block of the file which has the extent
(ee_block=2^32-2, ee_len=1) with FIBMAP ioctl, it causes BUG_ON
in ext4_ext_put_gap_in_cache().
To avoid the problem, ext4_map_blocks() needs to check the file logical block
number. ext4_ext_put_gap_in_cache() called via ext4_map_blocks() cannot
handle 2^32-1 because the maximum file logical block number is 2^32-2.
Note that ext4_ind_map_blocks() returns -EIO when the block number is invalid.
So ext4_map_blocks() should also return the same errno.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
'0x7FDEADBEEF' will be truncated to 32-bit number under unicore32. Need
append 'ULL' for it.
The related warning (with allmodconfig under unicore32):
CC [M] fs/ext4/extents_status.o
fs/ext4/extents_status.c: In function "__es_remove_extent":
fs/ext4/extents_status.c:813: warning: integer constant is too large for "long" type
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
and COLLAPSE_RANGE fallocate operations, and scalability improvements
in the jbd2 layer and in xattr handling when the extended attributes
spill over into an external block.
Other than that, the usual clean ups and minor bug fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=4s1Z
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Major changes for 3.14 include support for the newly added ZERO_RANGE
and COLLAPSE_RANGE fallocate operations, and scalability improvements
in the jbd2 layer and in xattr handling when the extended attributes
spill over into an external block.
Other than that, the usual clean ups and minor bug fixes"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits)
ext4: fix premature freeing of partial clusters split across leaf blocks
ext4: remove unneeded test of ret variable
ext4: fix comment typo
ext4: make ext4_block_zero_page_range static
ext4: atomically set inode->i_flags in ext4_set_inode_flags()
ext4: optimize Hurd tests when reading/writing inodes
ext4: kill i_version support for Hurd-castrated file systems
ext4: each filesystem creates and uses its own mb_cache
fs/mbcache.c: doucple the locking of local from global data
fs/mbcache.c: change block and index hash chain to hlist_bl_node
ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
ext4: refactor ext4_fallocate code
ext4: Update inode i_size after the preallocation
ext4: fix partial cluster handling for bigalloc file systems
ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents
ext4: only call sync_filesystm() when remounting read-only
fs: push sync_filesystem() down to the file system's remount_fs()
jbd2: improve error messages for inconsistent journal heads
jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()
jbd2: minimize region locked by j_list_lock in journal_get_create_access()
...
Pull renameat2 system call from Miklos Szeredi:
"This adds a new syscall, renameat2(), which is the same as renameat()
but with a flags argument.
The purpose of extending rename is to add cross-rename, a symmetric
variant of rename, which exchanges the two files. This allows
interesting things, which were not possible before, for example
atomically replacing a directory tree with a symlink, etc... This
also allows overlayfs and friends to operate on whiteouts atomically.
Andy Lutomirski also suggested a "noreplace" flag, which disables the
overwriting behavior of rename.
These two flags, RENAME_EXCHANGE and RENAME_NOREPLACE are only
implemented for ext4 as an example and for testing"
* 'cross-rename' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ext4: add cross rename support
ext4: rename: split out helper functions
ext4: rename: move EMLINK check up
ext4: rename: create ext4_renament structure for local vars
vfs: add cross-rename
vfs: lock_two_nondirectories: allow directory args
security: add flags to rename hooks
vfs: add RENAME_NOREPLACE flag
vfs: add renameat2 syscall
vfs: rename: use common code for dir and non-dir
vfs: rename: move d_move() up
vfs: add d_is_dir()
Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page. As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently. At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.
Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate. Reclaim will check
for this flag before installing shadow pages.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We know that "ret > 0" is true here. These tests were left over from
commit 02afc27fae ('direct-io: Handle O_(D)SYNC AIO') and aren't
needed any more.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xfstests generic/311 and shared/298 fail when run on a bigalloc file
system. Kernel error messages produced during the tests report that
blocks to be freed are already on the to-be-freed list. When e2fsck
is run at the end of the tests, it typically reports bad i_blocks and
bad free blocks counts.
The bug that causes these failures is located in ext4_ext_rm_leaf().
Code at the end of the function frees a partial cluster if it's not
shared with an extent remaining in the leaf. However, if all the
extents in the leaf have been removed, the code dereferences an
invalid extent pointer (off the front of the leaf) when the check for
sharing is made. This generally has the effect of unconditionally
freeing the partial cluster, which leads to the observed failures
when the partial cluster is shared with the last extent in the next
leaf.
Fix this by attempting to free the cluster only if extents remain in
the leaf. Any remaining partial cluster will be freed if possible
when the next leaf is processed or when leaf removal is complete.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Cross rename (exchange source and dest) will need to call some of these
helpers for both source and dest, while overwriting rename currently only
calls them for one or the other. This also makes the code easier to
follow.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Move checking i_nlink from after ext4_get_first_dir_block() to before. The
check doesn't rely on the result of that function and the function only
fails on fs corruption, so the order shouldn't matter.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Need to split up ext4_rename() into helpers but there are too many local
variables involved, so create a new structure. This also, apparently,
makes the generated code size slightly smaller.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
If this flag is specified and the target of the rename exists then the
rename syscall fails with EEXIST.
The VFS does the existence checking, so it is trivial to enable for most
local filesystems. This patch only enables it in ext4.
For network filesystems the VFS check is not enough as there may be a race
between a remote create and the rename, so these filesystems need to handle
this flag in their ->rename() implementations to ensure atomicity.
Andy writes about why this is useful:
"The trivial answer: to eliminate the race condition from 'mv -i'.
Another answer: there's a common pattern to atomically create a file
with contents: open a temporary file, write to it, optionally fsync
it, close it, then link(2) it to the final name, then unlink the
temporary file.
The reason to use link(2) is because it won't silently clobber the destination.
This is annoying:
- It requires an extra system call that shouldn't be necessary.
- It doesn't work on (IMO sensible) filesystems that don't support
hard links (e.g. vfat).
- It's not atomic -- there's an intermediate state where both files exist.
- It's ugly.
The new rename flag will make this totally sensible.
To be fair, on new enough kernels, you can also use O_TMPFILE and
linkat to achieve the same thing even more cleanly."
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Currently in ext4_fallocate() and ext4_zero_range() we're testing ret
variable along with new_size. However in ext4_fallocate() we just tested
ret before and in ext4_zero_range() if will always be zero when we get
there so there is no need to test it in both cases.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use cmpxchg() to atomically set i_flags instead of clearing out the
S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the
EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race
where an immutable file has the immutable flag cleared for a brief
window of time.
Reported-by: John Sullivan <jsrhbz@kanargh.force9.co.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's only called within inode.c, so make it static, remove its prototype
from ext4.h and move it above all of its callers so it doesn't need a
prototype within inode.c.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use cmpxchg() to atomically set i_flags instead of clearing out the
S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the
EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race
where an immutable file has the immutable flag cleared for a brief
window of time.
Reported-by: John Sullivan <jsrhbz@kanargh.force9.co.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Set a in-memory superblock flag to indicate whether the file system is
designed to support the Hurd.
Also, add a sanity check to make sure the 64-bit feature is not set
for Hurd file systems, since i_file_acl_high conflicts with a
Hurd-specific field.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Hurd file system uses uses the inode field which is now used for
i_version for its translator block. This means that ext2 file systems
that are formatted for GNU Hurd can't be used to support NFSv4. Given
that Hurd file systems don't support extents, and a huge number of
modern file system features, this is no great loss.
If we don't do this, the attempt to update the i_version field will
stomp over the translator block field, which will cause file system
corruption for Hurd file systems. This can be replicated via:
mke2fs -t ext2 -o hurd /dev/vdc
mount -t ext4 /dev/vdc /vdc
touch /vdc/bug0000
umount /dev/vdc
e2fsck -f /dev/vdc
Addresses-Debian-Bug: #738758
Reported-By: Gabriele Giacone <1o5g4r8o@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds new interfaces to create and destory cache,
ext4_xattr_create_cache() and ext4_xattr_destroy_cache(), and remove
the cache creation and destory calls from ex4_init_xattr() and
ext4_exitxattr() in fs/ext4/xattr.c.
fs/ext4/super.c has been changed so that when a filesystem is mounted
a cache is allocated and attched to its ext4_sb_info structure.
fs/mbcache.c has been changed so that only one slab allocator is
allocated and used by all mbcache structures.
Signed-off-by: T. Makphaibulchoke <tmac@hp.com>
Introduce new FALLOC_FL_ZERO_RANGE flag for fallocate. This has the same
functionality as xfs ioctl XFS_IOC_ZERO_RANGE.
It can be used to convert a range of file to zeros preferably without
issuing data IO. Blocks should be preallocated for the regions that span
holes in the file, and the entire range is preferable converted to
unwritten extents
This can be also used to preallocate blocks past EOF in the same way as
with fallocate. Flag FALLOC_FL_KEEP_SIZE which should cause the inode
size to remain the same.
Also add appropriate tracepoints.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move block allocation out of the ext4_fallocate into separate function
called ext4_alloc_file_blocks(). This will allow us to use the same
allocation code for other allocation operations such as zero range which
is commit in the next patch.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently in ext4_fallocate we would update inode size, c_time and sync
the file with every partial allocation which is entirely unnecessary. It
is true that if the crash happens in the middle of truncate we might end
up with unchanged i size, or c_time which I do not think is really a
problem - it does not mean file system corruption in any way. Note that
xfs is doing things the same way e.g. update all of the mentioned after
the allocation is done.
This commit moves all the updates after the allocation is done. In
addition we also need to change m_time as not only inode has been change
bot also data regions might have changed (unwritten extents). However
m_time will be only updated when i_size changed.
Also we do not need to be paranoid about changing the c_time only if the
actual allocation have happened, we can change it even if we try to
allocate only to find out that there are already block allocated. It's
not really a big deal and it will save us some additional complexity.
Also use ext4_debug, instead of ext4_warning in #ifdef EXT4FS_DEBUG
section.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>-
--
v3: Do not remove the code to set EXT4_INODE_EOFBLOCKS flag
fs/ext4/extents.c | 96 ++++++++++++++++++++++++-------------------------------
1 file changed, 42 insertions(+), 54 deletions(-)
Commit 9cb00419fa, which enables hole punching for bigalloc file
systems, exposed a bug introduced by commit 6ae06ff51e in an earlier
release. When run on a bigalloc file system, xfstests generic/013, 068,
075, 083, 091, 100, 112, 127, 263, 269, and 270 fail with e2fsck errors
or cause kernel error messages indicating that previously freed blocks
are being freed again.
The latter commit optimizes the selection of the starting extent in
ext4_ext_rm_leaf() when hole punching by beginning with the extent
supplied in the path argument rather than with the last extent in the
leaf node (as is still done when truncating). However, the code in
rm_leaf that initially sets partial_cluster to track cluster sharing on
extent boundaries is only guaranteed to run if rm_leaf starts with the
last node in the leaf. Consequently, partial_cluster is not correctly
initialized when hole punching, and a cluster on the boundary of a
punched region that should be retained may instead be deallocated.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Code deallocating the extent path referenced by an argument to
ext4_ext_handle_uninitialized_extents was made redundant with identical
code in its one caller, ext4_ext_map_blocks, by commit 3779473246.
Allocating and deallocating the path in the same function also makes
the code clearer.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
