Commit Graph

15 Commits

Author SHA1 Message Date
Michael Kelley
b0a4ab7ca4 iommu/hyper-v: Use helper instead of directly accessing affinity
Recent changes to solve inconsistencies in handling IRQ masks #ifdef
out the affinity field in irq_common_data for non-SMP configurations.
The current code in hyperv_irq_remapping_alloc() gets a compiler error
in that case.

Fix this by using the new irq_data_update_affinity() helper, which
handles the non-SMP case correctly.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: aa0813581b ("genirq: Provide an IRQ affinity mask in non-SMP configs")
Link: https://lore.kernel.org/r/1658796820-2261-1-git-send-email-mikelley@microsoft.com
2022-08-04 10:02:09 +01:00
Samuel Holland
4d0b829881 genirq: Return a const cpumask from irq_data_get_affinity_mask
Now that the irq_data_update_affinity helper exists, enforce its use
by returning a a const cpumask from irq_data_get_affinity_mask.

Since the previous commit already updated places that needed to call
irq_data_update_affinity, this commit updates the remaining code that
either did not modify the cpumask or immediately passed the modified
mask to irq_set_affinity.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701200056.46555-8-samuel@sholland.org
2022-07-07 09:38:04 +01:00
Wei Liu
fb5ef35165 iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition
Just like MSI/MSI-X, IO-APIC interrupts are remapped by Microsoft
Hypervisor when Linux runs as the root partition. Implement an IRQ
domain to handle mapping and unmapping of IO-APIC interrupts.

Signed-off-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Joerg Roedel <joro@8bytes.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210203150435.27941-17-wei.liu@kernel.org
2021-02-11 08:47:07 +00:00
Dexuan Cui
26ab12bb9d iommu/hyper-v: Remove I/O-APIC ID check from hyperv_irq_remapping_select()
commit a491bb19f7 ("iommu/hyper-v: Implement select() method on remapping
irqdomain") restricted the irq_domain_ops::select() callback to match on
I/O-APIC index 0, which was correct until the parameter was changed to
carry the I/O APIC ID in commit f36a74b934.

If the ID is not 0 then the match fails. Therefore I/O-APIC init fails to
retrieve the parent irqdomain for the I/O-APIC resulting in a boot panic:

    kernel BUG at arch/x86/kernel/apic/io_apic.c:2408!

Fix it by matching the I/O-APIC independent of the ID as there is only one
I/O APIC emulated by Hyper-V.

[ tglx: Amended changelog ]

Fixes: f36a74b934 ("x86/ioapic: Use I/O-APIC ID for finding irqdomain, not index")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20201202004510.1818-1-decui@microsoft.com
2020-12-02 11:22:55 +01:00
David Woodhouse
bf27ef8a77 iommu/hyper-v: Disable IRQ pseudo-remapping if 15 bit APIC IDs are available
If the 15-bit APIC ID support is present in emulated MSI then there's no
need for the pseudo-remapping support.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-34-dwmw2@infradead.org
2020-10-28 20:26:31 +01:00
David Woodhouse
ed381fca47 x86: Kill all traces of irq_remapping_get_irq_domain()
All users are converted to use the fwspec based parent domain lookup.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-30-dwmw2@infradead.org
2020-10-28 20:26:28 +01:00
David Woodhouse
a491bb19f7 iommu/hyper-v: Implement select() method on remapping irqdomain
Preparatory for removing irq_remapping_get_irq_domain()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-27-dwmw2@infradead.org
2020-10-28 20:26:28 +01:00
David Woodhouse
5d5a971338 x86/ioapic: Generate RTE directly from parent irqchip's MSI message
The I/O-APIC generates an MSI cycle with address/data bits taken from its
Redirection Table Entry in some combination which used to make sense, but
now is just a bunch of bits which get passed through in some seemingly
arbitrary order.

Instead of making IRQ remapping drivers directly frob the I/OA-PIC RTE, let
them just do their job and generate an MSI message. The bit swizzling to
turn that MSI message into the I/O-APIC's RTE is the same in all cases,
since it's a function of the I/O-APIC hardware. The IRQ remappers have no
real need to get involved with that.

The only slight caveat is that the I/OAPIC is interpreting some of those
fields too, and it does want the 'vector' field to be unique to make EOI
work. The AMD IOMMU happens to put its IRTE index in the bits that the
I/O-APIC thinks are the vector field, and accommodates this requirement by
reserving the first 32 indices for the I/O-APIC.  The Intel IOMMU doesn't
actually use the bits that the I/O-APIC thinks are the vector field, so it
fills in the 'pin' value there instead.

[ tglx: Replaced the unreadably macro maze with the cleaned up RTE/msi_msg
  	bitfields and added commentry to explain the mapping magic ]

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-22-dwmw2@infradead.org
2020-10-28 20:26:27 +01:00
Thomas Gleixner
341b4a7211 x86/ioapic: Cleanup IO/APIC route entry structs
Having two seperate structs for the I/O-APIC RTE entries (non-remapped and
DMAR remapped) requires type casts and makes it hard to map.

Combine them in IO_APIC_routing_entry by defining a union of two 64bit
bitfields. Use naming which reflects which bits are shared and which bits
are actually different for the operating modes.

[dwmw2: Fix it up and finish the job, pulling the 32-bit w1,w2 words for
        register access into the same union and eliminating a few more
        places where bits were accessed through masks and shifts.]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-21-dwmw2@infradead.org
2020-10-28 20:26:27 +01:00
Thomas Gleixner
33a65ba470 x86_ioapic_Consolidate_IOAPIC_allocation
Move the IOAPIC specific fields into their own struct and reuse the common
devid. Get rid of the #ifdeffery as it does not matter at all whether the
alloc info is a couple of bytes longer or not.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112332.054367732@linutronix.de
2020-09-16 16:52:32 +02:00
Thomas Gleixner
6b6256e616 iommu/irq_remapping: Consolidate irq domain lookup
Now that the iommu implementations handle the X86_*_GET_PARENT_DOMAIN
types, consolidate the two getter functions.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112331.741909337@linutronix.de
2020-09-16 16:52:30 +02:00
Thomas Gleixner
b4c364da32 x86/irq: Add allocation type for parent domain retrieval
irq_remapping_ir_irq_domain() is used to retrieve the remapping parent
domain for an allocation type. irq_remapping_irq_domain() is for retrieving
the actual device domain for allocating interrupts for a device.

The two functions are similar and can be unified by using explicit modes
for parent irq domain retrieval.

Add X86_IRQ_ALLOC_TYPE_IOAPIC/HPET_GET_PARENT and use it in the iommu
implementations. Drop the parent domain retrieval for PCI_MSI/X as that is
unused.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112331.436350257@linutronix.de
2020-09-16 16:52:29 +02:00
Thomas Gleixner
e3beca48a4 irqdomain/treewide: Keep firmware node unconditionally allocated
Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type
IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after
creating the irqdomain. The only purpose of these FW nodes is to convey
name information. When this was introduced the core code did not store the
pointer to the node in the irqdomain. A recent change stored the firmware
node pointer in irqdomain for other reasons and missed to notice that the
usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence
are broken by this. Storing a dangling pointer is dangerous itself, but in
case that the domain is destroyed later on this leads to a double free.

Remove the freeing of the firmware node after creating the irqdomain from
all affected call sites to cure this.

Fixes: 711419e504 ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de
2020-07-14 17:44:42 +02:00
Rikard Falkeborn
9f510d1e42 iommu/hyper-v: Constify hyperv_ir_domain_ops
The struct hyperv_ir_domain_ops is not modified and can be made const to
allow the compiler to put it in read-only memory.

Before:
   text    data     bss     dec     hex filename
   2916    1180    1120    5216    1460 drivers/iommu/hyperv-iommu.o

After:
   text    data     bss     dec     hex filename
   3044    1052    1120    5216    1460 drivers/iommu/hyperv-iommu.o

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20200525214958.30015-2-rikard.falkeborn@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-27 14:38:20 +02:00
Lan Tianyu
29217a4746 iommu/hyper-v: Add Hyper-V stub IOMMU driver
On the bare metal, enabling X2APIC mode requires interrupt remapping
function which helps to deliver irq to cpu with 32-bit APIC ID.
Hyper-V doesn't provide interrupt remapping function so far and Hyper-V
MSI protocol already supports to deliver interrupt to the CPU whose
virtual processor index is more than 255. IO-APIC interrupt still has
8-bit APIC ID limitation.

This patch is to add Hyper-V stub IOMMU driver in order to enable
X2APIC mode successfully in Hyper-V Linux guest. The driver returns X2APIC
interrupt remapping capability when X2APIC mode is available. Otherwise,
it creates a Hyper-V irq domain to limit IO-APIC interrupts' affinity
and make sure cpus assigned with IO-APIC interrupt have 8-bit APIC ID.

Define 24 IO-APIC remapping entries because Hyper-V only expose one
single IO-APIC and one IO-APIC has 24 pins according IO-APIC spec(
https://pdos.csail.mit.edu/6.828/2016/readings/ia32/ioapic.pdf).

Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-02-28 11:12:16 +01:00