Convert NVIDIA Tegra20 AC97 binding to DT schema.
Change -gpio to -gpios in schema as "gpio" suffix is deprecated.
Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240423115749.15786-1-sheharyaar48@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit was a pre-requisite for commit c1ccfcf1a9 ("NFSD:
Reschedule CB operations when backchannel rpc_clnt is shut down"),
which has already been reverted.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The reverted commit attempted to enable NFSD to retransmit pending
callback operations if an NFS client disconnects, but
unintentionally introduces a hazardous behavior regression if the
client becomes permanently unreachable while callback operations are
still pending.
A disconnect can occur due to network partition or if the NFS server
needs to force the NFS client to retransmit (for example, if a GSS
window under-run occurs).
Reverting the commit will make NFSD behave the same as it did in
v6.8 and before. Pending callback operations are permanently lost if
the client connection is terminated before the client receives them.
For some callback operations, this loss is not harmful.
However, for CB_RECALL, the loss means a delegation might be revoked
unnecessarily. For CB_OFFLOAD, pending COPY operations will never
complete unless the NFS client subsequently sends an OFFLOAD_STATUS
operation, which the Linux NFS client does not currently implement.
These issues still need to be addressed somehow.
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218735
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Commit 073237281a ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT
UUID for non-AMD systems") attempted to avoid evaluating the same Low-
Power S0 Idle _DSM functions for different UUIDs, but that turns out to
be a mistake, because some systems in the field are adversely affected
by it.
Address this by allowing all Low-Power S0 Idle _DSM functions to be
evaluated, but still print the message regarding duplication of Low-
Power S0 Idle _DSM function sets for different UUIDs.
Fixes: 073237281a ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218750
Reported-and-tested-by: Mark Pearson <mpearson@lenovo.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmYm8oEACgkQiiy9cAdy
T1HAVAv/T9NXYhTYQK8EK7DvzcGDV4dOcFI6GVsrinp1KHGyuxoPABKGctQXfou0
4DJ9ik0CYFWmVuz8CODxmHkJq8fclnkJtVPH4DjcOm8CqhcaMJNVgEWP6eMGevGo
sQPEtFAYRPQrIm5X8u2uvARE490YiUD85Se+6LrYZdzt/BOUQQHtKodSTre1ZCAV
F6GLEVVuncP9iqno9lNu1EI8ltcOW6i1i15s4HOmULNwtUKdwsYTWVqW6JDOy5gM
9YqXJhPobVcZnY/m8QVWfE/lEPOwJO5lbRF4Ktykz4PQkxZqD6t+Noesj73GKEgC
7jnt3L79s1zA51gHdn96Z1qWlaIruX4ugYhfzQAW7PfYmSUr3I8G09ofzwFc77aH
osYoU6mZWWL+4/RIKK3DGYRe2ET68KmlNheG2OTOeCNfwjSoI5rWHSLMGqlegTc0
40gz62OHuwncMyKFLwGaf6ztzlOLHIdVU4uhRv1/9ptZuMl/2LoiN7G8ZddbtYIS
JxL/kIEE
=PaAG
-----END PGP SIGNATURE-----
Merge tag '6.9-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fscache fix
- fix for case where we could use uninitialized lease
- add tracepoint for debugging refcounting of tcon
- fix mount option regression (e.g. forceuid vs. noforceuid when uid=
specified) caused by conversion to the new mount API
* tag '6.9-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: reinstate original behavior again for forceuid/forcegid
smb: client: fix rename(2) regression against samba
cifs: Add tracing for the cifs_tcon struct refcounting
cifs: Fix reacquisition of volume cookie on still-live connection
NLMSG_DONE contains an error code, it has to be extracted.
Prior to this change all dumps will end in success,
and in case of failure the result is silently truncated.
Fixes: e4b48ed460 ("tools: ynl: add a completely generic client")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240420020827.3288615-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This code returns -EINVAL if "i" is out of bounds a few lines earlier.
Delete this unnecessary check and pull the code in a tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/1ee32bfb-6f6c-4b61-887b-6f655abbfc47@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert mt2701-wm890 bindings from text to dtschema. This is used by
MediaTek mt7623a/n SoC.
Signed-off-by: Kartik Agarwala <agarwala.kartik@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240421033129.13076-1-agarwala.kartik@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Static checkers complain that the silicon_uid variable passed by
pointer to cs35l56_read_silicon_uid() could later be used
uninitialised when calling cs_amp_get_efi_calibration_data().
cs35l56_read_silicon_uid() must have succeeded to call
cs_amp_get_efi_calibration_data() and that would have populated the
variable.
However, initialise the value so we are not haunted by it forevermore.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Fixes: e1830f66f6 ("ASoC: cs35l56: Add helper functions for amp calibration")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240422103211.236063-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZizJ
-----END PGP SIGNATURE-----
Merge tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Five ksmbd server fixes, most also for stable:
- rename fix
- two fixes for potential out of bounds
- fix for connections from MacOS (padding in close response)
- fix for when to enable persistent handles"
* tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: add continuous availability share parameter
ksmbd: common: use struct_group_attr instead of struct_group for network_open_info
ksmbd: clear RENAME_NOREPLACE before calling vfs_rename
ksmbd: validate request buffer size in smb2_allocate_rsp_buf()
ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf
During module probe, regulator 'vin' and 'vdd-io' are used and enabled,
but the vdd-io regulator overwrites the 'vin' regulator pointer. During
remove, only the vdd-io is disabled, as the vin regulator pointer is not
available anymore. When regulator_put() is called during resource
cleanup a kernel warning is given, as the regulator is still enabled.
Store the two regulators in separate pointers and disable both the
regulators on module remove.
Fixes: 49d22c70aa ("NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage")
Signed-off-by: Paul Geurts <paul_geurts@live.nl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/DB7PR09MB26847A4EBF88D9EDFEB1DA0F950E2@DB7PR09MB2684.eurprd09.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current maintainer Douglas Miller has left IBM and no replacement has
been assigned for the driver. The eHEA hardware was last used on
IBM POWER7 systems, the last of which reached end-of-support at the
end of 2020.
Signed-off-by: David Christensen <drc@linux.ibm.com>
Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20240418195517.528577-1-drc@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit cleans up the uapi for vhost_vdpa by
better naming some of the enums which report blk
information to user space, and they are not
in any official releases yet.
Fixes: 1ac61ddfee ("vDPA: report virtio-blk flush info to user space")
Fixes: ae1374b7f7 ("vDPA: report virtio-block read-only info to user space")
Fixes: 330b8aea69 ("vDPA: report virtio-block max segment size to user space")
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240415111047.1047774-1-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- fix a few more deadlocks in recovery
- fix u32/u64 issues in mi_btree_bitmap
- btree key cache shrinker now actually frees, with more instrumentation
coming so we can verify that it's working correctly more easily in the
future
-----BEGIN PGP SIGNATURE-----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=lCNd
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-04-22' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Nothing too crazy in this one, and it looks like (fingers crossed) the
recovery and repair issues are settling down - although there's going
to be a long tail there, as we've still yet to really ramp up on error
injection or syzbot.
- fix a few more deadlocks in recovery
- fix u32/u64 issues in mi_btree_bitmap
- btree key cache shrinker now actually frees, with more
instrumentation coming so we can verify that it's working
correctly more easily in the future"
* tag 'bcachefs-2024-04-22' of https://evilpiepirate.org/git/bcachefs:
bcachefs: If we run merges at a lower watermark, they must be nonblocking
bcachefs: Fix inode early destruction path
bcachefs: Fix deadlock in journal write path
bcachefs: Tweak btree key cache shrinker so it actually frees
bcachefs: bkey_cached.btree_trans_barrier_seq needs to be a ulong
bcachefs: Fix missing call to bch2_fs_allocator_background_exit()
bcachefs: Check for journal entries overruning end of sb clean section
bcachefs: Fix bio alloc in check_extent_checksum()
bcachefs: fix leak in bch2_gc_write_reflink_key
bcachefs: KEY_TYPE_error is allowed for reflink
bcachefs: Fix bch2_dev_btree_bitmap_marked_sectors() shift
bcachefs: make sure to release last journal pin in replay
bcachefs: node scan: ignore multiple nodes with same seq if interior
bcachefs: Fix format specifier in validate_bset_keys()
bcachefs: Fix null ptr deref in twf from BCH_IOCTL_FSCK_OFFLINE
With the recent PHYLINK changes requiring supported_interfaces to be set,
MV88E6250 family switches like the 88E6020 fail to probe - cmode is
never initialized on these devices, so mv88e6250_phylink_get_caps() does
not set any supported_interfaces flags.
Instead of a cmode, on 88E6250 we have a read-only port mode value that
encodes similar information. There is no reason to bother mapping port
mode to the cmodes of other switch models; instead we introduce a
mv88e6250_setup_supported_interfaces() that is called directly from
mv88e6250_phylink_get_caps().
Fixes: de5c9bf40c ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240417103737.166651-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit 2f4a4d63a1 ("ACPI: CPPC: Use access_width over bit_width for system
memory accesses") modified cpc_read()/cpc_write() to use access_width to
read CPC registers.
However, for PCC registers the access width field in the ACPI register
macro specifies the PCC subspace ID. For non-zero PCC subspace ID it is
incorrectly treated as access width. This causes errors when reading
from PCC registers in the CPPC driver.
For PCC registers, base the size of read/write on the bit width field.
The debug message in cpc_read()/cpc_write() is updated to print relevant
information for the address space type used to read the register.
Fixes: 2f4a4d63a1 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Tested-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 2f4a4d63a1 ("ACPI: CPPC: Use access_width over bit_width for
system memory accesses") neglected to properly wrap the bit_offset shift
when it comes to applying the mask. This may cause incorrect values to be
read and may cause the cpufreq module not be loaded.
[ 11.059751] cpu_capacity: CPU0 missing/invalid highest performance.
[ 11.066005] cpu_capacity: partial information: fallback to 1024 for all CPUs
Also, corrected the bitmask generation in GENMASK (extra bit being added).
Fixes: 2f4a4d63a1 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Jarred White <jarredwhite@linux.microsoft.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Reviewed-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
tracking down regressions.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmYmeN4PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YtzcH/1plJvgfTDMWZWoOgNuPSiExWFgqoWk3KyDw
hqBfQ0p5QvTnC/rQx8mgGP3EqUXegwFHormRT2oSNyCSBHBSMdJU5ZT/WOp4rDpa
NvjM7FurBhb3b83ieottl6dDxnbUiRy6+z/uayEeV03KEolL7/nljfBozg9282Ep
p6cc4D5zwNcYdeqEom32AVOPFUUtQAvPhGj4OUHBwjzn7WF2lfzb4z4RudmsyE5E
1Whd35HEOpKsNlosy9XJ8ZP/QHAb0Nkwdg2irT71lZ+37nUX/KgMxFuJUxviYI9m
4jtZsjRew7RS/EUtwbUsyD4DTXla0N2H+//ZF5AatRz8RuQKZgQ=
=A/2u
-----END PGP SIGNATURE-----
Merge tag 'docs-6.9-fixes2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A set of updates from Thorsten to his (new) guide to verifying bugs
and tracking down regressions"
* tag 'docs-6.9-fixes2' of git://git.lwn.net/linux:
docs: verify/bisect: stable regressions: first stable, then mainline
docs: verify/bisect: describe how to use a build host
docs: verify/bisect: explain testing reverts, patches and newer code
docs: verify/bisect: proper headlines and more spacing
docs: verify/bisect: add and fetch stable branches ahead of time
docs: verify/bisect: use git switch, tag kernel, and various fixes
forceuid/forcegid should be enabled by default when uid=/gid= options are
specified, but commit 24e0a1eff9 ("cifs: switch to new mount api")
changed the behavior. Due to the change, a mounted share does not show
intentional uid/gid for files and directories even though uid=/gid=
options are specified since forceuid/forcegid are not enabled.
This patch reinstates original behavior that overrides uid/gid with
specified uid/gid by the options.
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Signed-off-by: Takayuki Nagata <tnagata@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Detect and mitigate inode collsions that now occur since we
fixed 9p generating duplicate inode structures. Underlying
cause of these appears to be a race condition between reuse
of inode numbers in underlying file system and cleanup of
inode numbers in the client. Enabling caching
makes this much more likely to happen as it increases cleanup
latency due to writebacks.
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Michael Chan says:
====================
bnxt_en: AER fixes
This patchset fixes issues in the AER recovery logic. The first patch
refactors the code to make a shutdown function available for AER fatal
errors. The second patch fixes the AER fatal recovery logic. The
third patch fixes the health register logic to fix AER recovery failure
for the new P7 chips.
====================
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
During error recovery, such as AER fatal error slot reset, we call
bnxt_try_map_fw_health_reg() to try to get access to the health
register to determine the firmware state. Fix
bnxt_try_map_fw_health_reg() to recognize the P7 chip correctly
and set up the health register.
This fixes this type of AER slot reset failure:
bnxt_en 0000:04:00.0: AER: PCIe Bus Error: severity=Uncorrectable (Fatal), type=Inaccessible, (Unregistered Agent ID)
bnxt_en 0000:04:00.0 enp4s0f0np0: PCI I/O error detected
bnxt_en 0000:04:00.0 bnxt_re0: Handle device suspend call
bnxt_en 0000:04:00.1 enp4s0f1np1: PCI I/O error detected
bnxt_en 0000:04:00.1 bnxt_re1: Handle device suspend call
pcieport 0000:00:02.0: AER: Root Port link has been reset (0)
bnxt_en 0000:04:00.0 enp4s0f0np0: PCI Slot Reset
bnxt_en 0000:04:00.0: enabling device (0000 -> 0002)
bnxt_en 0000:04:00.0: Firmware not ready
bnxt_en 0000:04:00.1 enp4s0f1np1: PCI Slot Reset
bnxt_en 0000:04:00.1: enabling device (0000 -> 0002)
bnxt_en 0000:04:00.1: Firmware not ready
pcieport 0000:00:02.0: AER: device recovery failed
Fixes: a432a45bdb ("bnxt_en: Define basic P7 macros")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We do not support two simultaneous recoveries so check for reset
flag, BNXT_STATE_IN_FW_RESET, and do not proceed with AER further.
When the pci channel state is pci_channel_io_frozen, the PCIe link
can not be trusted so we disable the traffic immediately and stop
BAR access by calling bnxt_fw_fatal_close(). BAR access after
AER fatal error can cause an NMI.
Fixes: f75d9a0aa9 ("bnxt_en: Re-write PCI BARs after PCI fatal error.")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce bnxt_fw_fatal_close() API which can be used
to stop data path and disable device when firmware
is in fatal state.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
br_info_notify is a void function. There is no need to return.
Fixes: b6d0425b81 ("bridge: cfm: Netlink Notifications.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define my kernel.org address to be the canonical one, and add mailmap
entries for the various addresses (including typos) that have been
used over the years.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
First problem is a double call to __in_dev_get_rcu(), because
the second one could return NULL.
if (__in_dev_get_rcu(dev) && __in_dev_get_rcu(dev)->ifa_list)
Second problem is a read from dev->ip6_ptr with no NULL check:
if (!list_empty(&rcu_dereference(dev->ip6_ptr)->addr_list))
Use the correct RCU API to fix these.
v2: add missing include <net/addrconf.h>
Fixes: d329ea5bd8 ("icmp: add response to RFC 8335 PROBE messages")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
On older (pre-MLD API) devices, we started also calling
iwl_mvm_set_link_mapping()/iwl_mvm_unset_link_mapping(),
but of course not also iwl_mvm_remove_link(). Since the
link ID was only released in iwl_mvm_remove_link() this
causes us to run out of FW link IDs very quickly. Fix
it by releasing the link ID correctly.
Fixes: a8b5d4809b ("wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW")
Link: https://msgid.link/20240420154435.dce72db5d5e3.Ic40b454b24f1c7b380a1eedf67455d9cf2f58541@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix another deadlock related to the merge path; previously, we switched
to always running merges at a lower watermark (because they are
noncritical); but when we run at a lower watermark we also need to run
nonblocking or we've introduced a new deadlock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-and-tested-by: s@m-h.ug
Merge series from Shenghao Ding <shenghao-ding@ti.com>:
mixer-test report:
root@am335x-evm:/bin# mixer-test
TAP version 13
# Card 0 - TI BeagleBone Black (TI BeagleBone Black)
1..455
ok 1 get_value.0.64
# 0.64 PCMD3180 i2c2 Profile id
ok 2 name.0.64
ok 3 write_default.0.64
ok 4 write_valid.0.64
ok 5 write_invalid.0.64
ok 6 event_missing.0.64
ok 7 event_spurious.0.64
ok 8 get_value.0.63
# 0.63 PCMD3180 i2c2 Dev3 Ch8 Digi Volume
ok 9 name.0.63
ok 10 write_default.0.63
ok 11 write_valid.0.63
ok 12 write_invalid.0.63
ok 13 event_missing.0.63
ok 14 event_spurious.0.63
ok 15 get_value.0.62
# 0.62 PCMD3180 i2c2 Dev3 Ch7 Digi Volume
ok 16 name.0.62
ok 17 write_default.0.62
ok 18 write_valid.0.62
ok 19 write_invalid.0.62
ok 20 event_missing.0.62
ok 21 event_spurious.0.62
ok 22 get_value.0.61
# 0.61 PCMD3180 i2c2 Dev3 Ch6 Digi Volume
ok 23 name.0.61
ok 24 write_default.0.61
ok 25 write_valid.0.61
ok 26 write_invalid.0.61
ok 27 event_missing.0.61
ok 28 event_spurious.0.61
ok 29 get_value.0.60
# 0.60 PCMD3180 i2c2 Dev3 Ch5 Digi Volume
ok 30 name.0.60
ok 31 write_default.0.60
ok 32 write_valid.0.60
ok 33 write_invalid.0.60
ok 34 event_missing.0.60
ok 35 event_spurious.0.60
ok 36 get_value.0.59
# 0.59 PCMD3180 i2c2 Dev3 Ch4 Digi Volume
ok 37 name.0.59
ok 38 write_default.0.59
ok 39 write_valid.0.59
ok 40 write_invalid.0.59
ok 41 event_missing.0.59
ok 42 event_spurious.0.59
ok 43 get_value.0.58
# 0.58 PCMD3180 i2c2 Dev3 Ch3 Digi Volume
ok 44 name.0.58
ok 45 write_default.0.58
ok 46 write_valid.0.58
ok 47 write_invalid.0.58
ok 48 event_missing.0.58
ok 49 event_spurious.0.58
ok 50 get_value.0.57
# 0.57 PCMD3180 i2c2 Dev3 Ch2 Digi Volume
ok 51 name.0.57
ok 52 write_default.0.57
ok 53 write_valid.0.57
ok 54 write_invalid.0.57
ok 55 event_missing.0.57
ok 56 event_spurious.0.57
ok 57 get_value.0.56
# 0.56 PCMD3180 i2c2 Dev3 Ch1 Digi Volume
ok 58 name.0.56
ok 59 write_default.0.56
ok 60 write_valid.0.56
ok 61 write_invalid.0.56
ok 62 event_missing.0.56
ok 63 event_spurious.0.56
ok 64 get_value.0.55
# 0.55 PCMD3180 i2c2 Dev3 Ch8 Fine Volume
ok 65 name.0.55
ok 66 write_default.0.55
ok 67 write_valid.0.55
ok 68 write_invalid.0.55
ok 69 event_missing.0.55
ok 70 event_spurious.0.55
ok 71 get_value.0.54
# 0.54 PCMD3180 i2c2 Dev3 Ch7 Fine Volume
ok 72 name.0.54
ok 73 write_default.0.54
ok 74 write_valid.0.54
ok 75 write_invalid.0.54
ok 76 event_missing.0.54
ok 77 event_spurious.0.54
ok 78 get_value.0.53
# 0.53 PCMD3180 i2c2 Dev3 Ch6 Fine Volume
ok 79 name.0.53
ok 80 write_default.0.53
ok 81 write_valid.0.53
ok 82 write_invalid.0.53
ok 83 event_missing.0.53
ok 84 event_spurious.0.53
ok 85 get_value.0.52
# 0.52 PCMD3180 i2c2 Dev3 Ch5 Fine Volume
ok 86 name.0.52
ok 87 write_default.0.52
ok 88 write_valid.0.52
ok 89 write_invalid.0.52
ok 90 event_missing.0.52
ok 91 event_spurious.0.52
ok 92 get_value.0.51
# 0.51 PCMD3180 i2c2 Dev3 Ch4 Fine Volume
ok 93 name.0.51
ok 94 write_default.0.51
ok 95 write_valid.0.51
ok 96 write_invalid.0.51
ok 97 event_missing.0.51
ok 98 event_spurious.0.51
ok 99 get_value.0.50
# 0.50 PCMD3180 i2c2 Dev3 Ch3 Fine Volume
ok 100 name.0.50
ok 101 write_default.0.50
ok 102 write_valid.0.50
ok 103 write_invalid.0.50
ok 104 event_missing.0.50
ok 105 event_spurious.0.50
ok 106 get_value.0.49
# 0.49 PCMD3180 i2c2 Dev3 Ch2 Fine Volume
ok 107 name.0.49
ok 108 write_default.0.49
ok 109 write_valid.0.49
ok 110 write_invalid.0.49
ok 111 event_missing.0.49
ok 112 event_spurious.0.49
ok 113 get_value.0.48
# 0.48 PCMD3180 i2c2 Dev3 Ch1 Fine Volume
ok 114 name.0.48
ok 115 write_default.0.48
ok 116 write_valid.0.48
ok 117 write_invalid.0.48
ok 118 event_missing.0.48
ok 119 event_spurious.0.48
ok 120 get_value.0.47
# 0.47 PCMD3180 i2c2 Dev2 Ch8 Digi Volume
ok 121 name.0.47
ok 122 write_default.0.47
ok 123 write_valid.0.47
ok 124 write_invalid.0.47
ok 125 event_missing.0.47
ok 126 event_spurious.0.47
ok 127 get_value.0.46
# 0.46 PCMD3180 i2c2 Dev2 Ch7 Digi Volume
ok 128 name.0.46
ok 129 write_default.0.46
ok 130 write_valid.0.46
ok 131 write_invalid.0.46
ok 132 event_missing.0.46
ok 133 event_spurious.0.46
ok 134 get_value.0.45
# 0.45 PCMD3180 i2c2 Dev2 Ch6 Digi Volume
ok 135 name.0.45
ok 136 write_default.0.45
ok 137 write_valid.0.45
ok 138 write_invalid.0.45
ok 139 event_missing.0.45
ok 140 event_spurious.0.45
ok 141 get_value.0.44
# 0.44 PCMD3180 i2c2 Dev2 Ch5 Digi Volume
ok 142 name.0.44
ok 143 write_default.0.44
ok 144 write_valid.0.44
ok 145 write_invalid.0.44
ok 146 event_missing.0.44
ok 147 event_spurious.0.44
ok 148 get_value.0.43
# 0.43 PCMD3180 i2c2 Dev2 Ch4 Digi Volume
ok 149 name.0.43
ok 150 write_default.0.43
ok 151 write_valid.0.43
ok 152 write_invalid.0.43
ok 153 event_missing.0.43
ok 154 event_spurious.0.43
ok 155 get_value.0.42
# 0.42 PCMD3180 i2c2 Dev2 Ch3 Digi Volume
ok 156 name.0.42
ok 157 write_default.0.42
ok 158 write_valid.0.42
ok 159 write_invalid.0.42
ok 160 event_missing.0.42
ok 161 event_spurious.0.42
ok 162 get_value.0.41
# 0.41 PCMD3180 i2c2 Dev2 Ch2 Digi Volume
ok 163 name.0.41
ok 164 write_default.0.41
ok 165 write_valid.0.41
ok 166 write_invalid.0.41
ok 167 event_missing.0.41
ok 168 event_spurious.0.41
ok 169 get_value.0.40
# 0.40 PCMD3180 i2c2 Dev2 Ch1 Digi Volume
ok 170 name.0.40
ok 171 write_default.0.40
ok 172 write_valid.0.40
ok 173 write_invalid.0.40
ok 174 event_missing.0.40
ok 175 event_spurious.0.40
ok 176 get_value.0.39
# 0.39 PCMD3180 i2c2 Dev2 Ch8 Fine Volume
ok 177 name.0.39
ok 178 write_default.0.39
ok 179 write_valid.0.39
ok 180 write_invalid.0.39
ok 181 event_missing.0.39
ok 182 event_spurious.0.39
ok 183 get_value.0.38
# 0.38 PCMD3180 i2c2 Dev2 Ch7 Fine Volume
ok 184 name.0.38
ok 185 write_default.0.38
ok 186 write_valid.0.38
ok 187 write_invalid.0.38
ok 188 event_missing.0.38
ok 189 event_spurious.0.38
ok 190 get_value.0.37
# 0.37 PCMD3180 i2c2 Dev2 Ch6 Fine Volume
ok 191 name.0.37
ok 192 write_default.0.37
ok 193 write_valid.0.37
ok 194 write_invalid.0.37
ok 195 event_missing.0.37
ok 196 event_spurious.0.37
ok 197 get_value.0.36
# 0.36 PCMD3180 i2c2 Dev2 Ch5 Fine Volume
ok 198 name.0.36
ok 199 write_default.0.36
ok 200 write_valid.0.36
ok 201 write_invalid.0.36
ok 202 event_missing.0.36
ok 203 event_spurious.0.36
ok 204 get_value.0.35
# 0.35 PCMD3180 i2c2 Dev2 Ch4 Fine Volume
ok 205 name.0.35
ok 206 write_default.0.35
ok 207 write_valid.0.35
ok 208 write_invalid.0.35
ok 209 event_missing.0.35
ok 210 event_spurious.0.35
ok 211 get_value.0.34
# 0.34 PCMD3180 i2c2 Dev2 Ch3 Fine Volume
ok 212 name.0.34
ok 213 write_default.0.34
ok 214 write_valid.0.34
ok 215 write_invalid.0.34
ok 216 event_missing.0.34
ok 217 event_spurious.0.34
ok 218 get_value.0.33
# 0.33 PCMD3180 i2c2 Dev2 Ch2 Fine Volume
ok 219 name.0.33
ok 220 write_default.0.33
ok 221 write_valid.0.33
ok 222 write_invalid.0.33
ok 223 event_missing.0.33
ok 224 event_spurious.0.33
ok 225 get_value.0.32
# 0.32 PCMD3180 i2c2 Dev2 Ch1 Fine Volume
ok 226 name.0.32
ok 227 write_default.0.32
ok 228 write_valid.0.32
ok 229 write_invalid.0.32
ok 230 event_missing.0.32
ok 231 event_spurious.0.32
ok 232 get_value.0.31
# 0.31 PCMD3180 i2c2 Dev1 Ch8 Digi Volume
ok 233 name.0.31
ok 234 write_default.0.31
ok 235 write_valid.0.31
ok 236 write_invalid.0.31
ok 237 event_missing.0.31
ok 238 event_spurious.0.31
ok 239 get_value.0.30
# 0.30 PCMD3180 i2c2 Dev1 Ch7 Digi Volume
ok 240 name.0.30
ok 241 write_default.0.30
ok 242 write_valid.0.30
ok 243 write_invalid.0.30
ok 244 event_missing.0.30
ok 245 event_spurious.0.30
ok 246 get_value.0.29
# 0.29 PCMD3180 i2c2 Dev1 Ch6 Digi Volume
ok 247 name.0.29
ok 248 write_default.0.29
ok 249 write_valid.0.29
ok 250 write_invalid.0.29
ok 251 event_missing.0.29
ok 252 event_spurious.0.29
ok 253 get_value.0.28
# 0.28 PCMD3180 i2c2 Dev1 Ch5 Digi Volume
ok 254 name.0.28
ok 255 write_default.0.28
ok 256 write_valid.0.28
ok 257 write_invalid.0.28
ok 258 event_missing.0.28
ok 259 event_spurious.0.28
ok 260 get_value.0.27
# 0.27 PCMD3180 i2c2 Dev1 Ch4 Digi Volume
ok 261 name.0.27
ok 262 write_default.0.27
ok 263 write_valid.0.27
ok 264 write_invalid.0.27
ok 265 event_missing.0.27
ok 266 event_spurious.0.27
ok 267 get_value.0.26
# 0.26 PCMD3180 i2c2 Dev1 Ch3 Digi Volume
ok 268 name.0.26
ok 269 write_default.0.26
ok 270 write_valid.0.26
ok 271 write_invalid.0.26
ok 272 event_missing.0.26
ok 273 event_spurious.0.26
ok 274 get_value.0.25
# 0.25 PCMD3180 i2c2 Dev1 Ch2 Digi Volume
ok 275 name.0.25
ok 276 write_default.0.25
ok 277 write_valid.0.25
ok 278 write_invalid.0.25
ok 279 event_missing.0.25
ok 280 event_spurious.0.25
ok 281 get_value.0.24
# 0.24 PCMD3180 i2c2 Dev1 Ch1 Digi Volume
ok 282 name.0.24
ok 283 write_default.0.24
ok 284 write_valid.0.24
ok 285 write_invalid.0.24
ok 286 event_missing.0.24
ok 287 event_spurious.0.24
ok 288 get_value.0.23
# 0.23 PCMD3180 i2c2 Dev1 Ch8 Fine Volume
ok 289 name.0.23
ok 290 write_default.0.23
ok 291 write_valid.0.23
ok 292 write_invalid.0.23
ok 293 event_missing.0.23
ok 294 event_spurious.0.23
ok 295 get_value.0.22
# 0.22 PCMD3180 i2c2 Dev1 Ch7 Fine Volume
ok 296 name.0.22
ok 297 write_default.0.22
ok 298 write_valid.0.22
ok 299 write_invalid.0.22
ok 300 event_missing.0.22
ok 301 event_spurious.0.22
ok 302 get_value.0.21
# 0.21 PCMD3180 i2c2 Dev1 Ch6 Fine Volume
ok 303 name.0.21
ok 304 write_default.0.21
ok 305 write_valid.0.21
ok 306 write_invalid.0.21
ok 307 event_missing.0.21
ok 308 event_spurious.0.21
ok 309 get_value.0.20
# 0.20 PCMD3180 i2c2 Dev1 Ch5 Fine Volume
ok 310 name.0.20
ok 311 write_default.0.20
ok 312 write_valid.0.20
ok 313 write_invalid.0.20
ok 314 event_missing.0.20
ok 315 event_spurious.0.20
ok 316 get_value.0.19
# 0.19 PCMD3180 i2c2 Dev1 Ch4 Fine Volume
ok 317 name.0.19
ok 318 write_default.0.19
ok 319 write_valid.0.19
ok 320 write_invalid.0.19
ok 321 event_missing.0.19
ok 322 event_spurious.0.19
ok 323 get_value.0.18
# 0.18 PCMD3180 i2c2 Dev1 Ch3 Fine Volume
ok 324 name.0.18
ok 325 write_default.0.18
ok 326 write_valid.0.18
ok 327 write_invalid.0.18
ok 328 event_missing.0.18
ok 329 event_spurious.0.18
ok 330 get_value.0.17
# 0.17 PCMD3180 i2c2 Dev1 Ch2 Fine Volume
ok 331 name.0.17
ok 332 write_default.0.17
ok 333 write_valid.0.17
ok 334 write_invalid.0.17
ok 335 event_missing.0.17
ok 336 event_spurious.0.17
ok 337 get_value.0.16
# 0.16 PCMD3180 i2c2 Dev1 Ch1 Fine Volume
ok 338 name.0.16
ok 339 write_default.0.16
ok 340 write_valid.0.16
ok 341 write_invalid.0.16
ok 342 event_missing.0.16
ok 343 event_spurious.0.16
ok 344 get_value.0.15
# 0.15 PCMD3180 i2c2 Dev0 Ch8 Digi Volume
ok 345 name.0.15
ok 346 write_default.0.15
ok 347 write_valid.0.15
ok 348 write_invalid.0.15
ok 349 event_missing.0.15
ok 350 event_spurious.0.15
ok 351 get_value.0.14
# 0.14 PCMD3180 i2c2 Dev0 Ch7 Digi Volume
ok 352 name.0.14
ok 353 write_default.0.14
ok 354 write_valid.0.14
ok 355 write_invalid.0.14
ok 356 event_missing.0.14
ok 357 event_spurious.0.14
ok 358 get_value.0.13
# 0.13 PCMD3180 i2c2 Dev0 Ch6 Digi Volume
ok 359 name.0.13
ok 360 write_default.0.13
ok 361 write_valid.0.13
ok 362 write_invalid.0.13
ok 363 event_missing.0.13
ok 364 event_spurious.0.13
ok 365 get_value.0.12
# 0.12 PCMD3180 i2c2 Dev0 Ch5 Digi Volume
ok 366 name.0.12
ok 367 write_default.0.12
ok 368 write_valid.0.12
ok 369 write_invalid.0.12
ok 370 event_missing.0.12
ok 371 event_spurious.0.12
ok 372 get_value.0.11
# 0.11 PCMD3180 i2c2 Dev0 Ch4 Digi Volume
ok 373 name.0.11
ok 374 write_default.0.11
ok 375 write_valid.0.11
ok 376 write_invalid.0.11
ok 377 event_missing.0.11
ok 378 event_spurious.0.11
ok 379 get_value.0.10
# 0.10 PCMD3180 i2c2 Dev0 Ch3 Digi Volume
ok 380 name.0.10
ok 381 write_default.0.10
ok 382 write_valid.0.10
ok 383 write_invalid.0.10
ok 384 event_missing.0.10
ok 385 event_spurious.0.10
ok 386 get_value.0.9
# 0.9 PCMD3180 i2c2 Dev0 Ch2 Digi Volume
ok 387 name.0.9
ok 388 write_default.0.9
ok 389 write_valid.0.9
ok 390 write_invalid.0.9
ok 391 event_missing.0.9
ok 392 event_spurious.0.9
ok 393 get_value.0.8
# 0.8 PCMD3180 i2c2 Dev0 Ch1 Digi Volume
ok 394 name.0.8
ok 395 write_default.0.8
ok 396 write_valid.0.8
ok 397 write_invalid.0.8
ok 398 event_missing.0.8
ok 399 event_spurious.0.8
ok 400 get_value.0.7
# 0.7 PCMD3180 i2c2 Dev0 Ch8 Fine Volume
ok 401 name.0.7
ok 402 write_default.0.7
ok 403 write_valid.0.7
ok 404 write_invalid.0.7
ok 405 event_missing.0.7
ok 406 event_spurious.0.7
ok 407 get_value.0.6
# 0.6 PCMD3180 i2c2 Dev0 Ch7 Fine Volume
ok 408 name.0.6
ok 409 write_default.0.6
ok 410 write_valid.0.6
ok 411 write_invalid.0.6
ok 412 event_missing.0.6
ok 413 event_spurious.0.6
ok 414 get_value.0.5
# 0.5 PCMD3180 i2c2 Dev0 Ch6 Fine Volume
ok 415 name.0.5
ok 416 write_default.0.5
ok 417 write_valid.0.5
ok 418 write_invalid.0.5
ok 419 event_missing.0.5
ok 420 event_spurious.0.5
ok 421 get_value.0.4
# 0.4 PCMD3180 i2c2 Dev0 Ch5 Fine Volume
ok 422 name.0.4
ok 423 write_default.0.4
ok 424 write_valid.0.4
ok 425 write_invalid.0.4
ok 426 event_missing.0.4
ok 427 event_spurious.0.4
ok 428 get_value.0.3
# 0.3 PCMD3180 i2c2 Dev0 Ch4 Fine Volume
ok 429 name.0.3
ok 430 write_default.0.3
ok 431 write_valid.0.3
ok 432 write_invalid.0.3
ok 433 event_missing.0.3
ok 434 event_spurious.0.3
ok 435 get_value.0.2
# 0.2 PCMD3180 i2c2 Dev0 Ch3 Fine Volume
ok 436 name.0.2
ok 437 write_default.0.2
ok 438 write_valid.0.2
ok 439 write_invalid.0.2
ok 440 event_missing.0.2
ok 441 event_spurious.0.2
ok 442 get_value.0.1
# 0.1 PCMD3180 i2c2 Dev0 Ch2 Fine Volume
ok 443 name.0.1
ok 444 write_default.0.1
ok 445 write_valid.0.1
ok 446 write_invalid.0.1
ok 447 event_missing.0.1
ok 448 event_spurious.0.1
ok 449 get_value.0.0
# 0.0 PCMD3180 i2c2 Dev0 Ch1 Fine Volume
ok 450 name.0.0
ok 451 write_default.0.0
ok 452 write_valid.0.0
ok 453 write_invalid.0.0
ok 454 event_missing.0.0
ok 455 event_spurious.0.0
# Totals: pass:455 fail:0 xfail:0 xpass:0 skip:0 error:0
Merge series from Seven Lee <wtli@nuvoton.com>:
Change the original fixed delay to the assignment from the property. It
will make it more flexible to different platforms to avoid pop noise at
the beginning of recording.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The change is based on rafael/acpi-nhlt [1] immutable branch which
Rafael kindly prepared for me. Without the topmost changes to ACPI/NHLT,
the patches present will fail to compile.
Recent changes for the ACPI tree [2] refactored interfaces of the NHLT
table. Currently we have two implementations - one found in acpi
subsystem (unused) and one in sound/hda/. As NHLT is part of ACPI, idea
is to make the former useful and then switch all users of existing
sound/hda/intel-nhlt.c to this new interface over time and remove the
duplicate afterward.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git/?h=acpi-nhlt
[2]: https://lore.kernel.org/linux-acpi/20240319083018.3159716-1-cezary.rojewski@intel.com/
Here are some small char/misc and other driver fixes for 6.9-rc5.
Included in here are the following:
- binder driver fix for reported problem
- speakup crash fix
- mei driver fixes for reported problems
- comdei driver fix
- interconnect driver fixes
- rtsx driver fix
- peci.h kernel doc fix
All of these have been in linux-next for over a week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZiT2+g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylExgCfdEFb54LOH10I3hstLdzKEYQlIdUAoK8fGerp
o29X7GJ3kmKh7d2tIS1m
=iXIs
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are some small char/misc and other driver fixes for 6.9-rc5.
Included in here are the following:
- binder driver fix for reported problem
- speakup crash fix
- mei driver fixes for reported problems
- comdei driver fix
- interconnect driver fixes
- rtsx driver fix
- peci.h kernel doc fix
All of these have been in linux-next for over a week with no reported
problems"
* tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
peci: linux/peci.h: fix Excess kernel-doc description warning
binder: check offset alignment in binder_get_object()
comedi: vmk80xx: fix incomplete endpoint checking
mei: vsc: Unregister interrupt handler for system suspend
Revert "mei: vsc: Call wake_up() in the threaded IRQ handler"
misc: rtsx: Fix rts5264 driver status incorrect when card removed
mei: me: disable RPL-S on SPS and IGN firmwares
speakup: Avoid crash on very long word
interconnect: Don't access req_list while it's being manipulated
interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
Here are 2 changes for 6.9-rc5 that deal with "driver core" stuff, that
do the following:
- sysfs reference leak fix
- embargoed-hardware-issues.rst update for Power
Both of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZiT4Dw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFwQCfR1OysT/aO16NUYBSaGd7Tx4/3dIAn3YDU7O7
BvGCYc/Nv7S7WdmA5KKf
=RuJo
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull kernfs bugfix and documentation update from Greg KH:
"Here are two changes for 6.9-rc5 that deal with "driver core" stuff,
that do the following:
- sysfs reference leak fix
- embargoed-hardware-issues.rst update for Power
Both of these have been in linux-next for over a week with no reported
issues"
* tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: embargoed-hardware-issues.rst: Add myself for Power
fs: sysfs: Fix reference leak in sysfs_break_active_protection()
Here are some small tty and serial driver fixes for 6.9-rc5 that resolve
a bunch of reported problems. Included in here are:
- MAINTAINERS and .mailmap update for Richard Genoud
- serial core regression fixes from 6.9-rc1 changes
- pci id cleanups
- serial core crash fix
- stm32 driver fixes
- 8250 driver fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZiT5AA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yli4QCeI7KNJxNI16CaI6tnVaKuhoWV8xkAn0Km6i4v
86MWyM8lo/GPpz18Jk13
=9vjg
-----END PGP SIGNATURE-----
Merge tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.9-rc5 that
resolve a bunch of reported problems. Included in here are:
- MAINTAINERS and .mailmap update for Richard Genoud
- serial core regression fixes from 6.9-rc1 changes
- pci id cleanups
- serial core crash fix
- stm32 driver fixes
- 8250 driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: stm32: Reset .throttled state in .startup()
serial: stm32: Return IRQ_NONE in the ISR if no handling happend
serial: core: Fix missing shutdown and startup for serial base port
serial: core: Clearing the circular buffer before NULLifying it
MAINTAINERS: mailmap: update Richard Genoud's email address
serial/pmac_zilog: Remove flawed mitigation for rx irq flood
serial: 8250_pci: Remove redundant PCI IDs
serial: core: Fix regression when runtime PM is not enabled
serial: mxs-auart: add spinlock around changing cts state
serial: 8250_dw: Revert: Do not reclock if already at correct rate
serial: 8250_lpc18xx: disable clks on error in probe()
Here are some small USB and Thunderbolt driver fixes for 6.9-rc5.
Included in here are:
- MAINTAINER file update for invalid email address
- usb-serial device id updates
- typec driver fixes
- thunderbolt / usb4 driver fixes
- usb core shutdown fixes
- cdc-wdm driver revert for reported problem in -rc1
- usb gadget driver fixes
- xhci driver fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZiT54g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylv8wCgvu/Biz4HuaLv0gE/K3c+mkxnjQEAmwQw8SVi
oJfHlArCZ5L4EMDumrs5
=MYb6
-----END PGP SIGNATURE-----
Merge tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.9-rc5.
Included in here are:
- MAINTAINER file update for invalid email address
- usb-serial device id updates
- typec driver fixes
- thunderbolt / usb4 driver fixes
- usb core shutdown fixes
- cdc-wdm driver revert for reported problem in -rc1
- usb gadget driver fixes
- xhci driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
USB: serial: option: add Telit FN920C04 rmnet compositions
usb: dwc3: ep0: Don't reset resource alloc flag
Revert "usb: cdc-wdm: close race between read and workqueue"
USB: serial: option: add Rolling RW101-GL and RW135-GL support
USB: serial: option: add Lonsung U8300/U9300 product
USB: serial: option: add support for Fibocom FM650/FG650
USB: serial: option: support Quectel EM060K sub-models
USB: serial: option: add Fibocom FM135-GL variants
usb: misc: onboard_usb_hub: Disable the USB hub clock on failure
thunderbolt: Avoid notify PM core about runtime PM resume
thunderbolt: Fix wake configurations after device unplug
usb: dwc2: host: Fix dereference issue in DDMA completion flow.
usb: typec: mux: it5205: Fix ChipID value typo
MAINTAINERS: Drop Li Yang as their email address stopped working
usb: gadget: fsl: Initialize udc before using it
usb: Disable USB3 LPM at shutdown
usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error
usb: typec: tcpm: Correct the PDO counting in pd_set
usb: gadget: functionfs: Wait for fences before enqueueing DMABUF
usb: gadget: functionfs: Fix inverted DMA fence direction
...
-----BEGIN PGP SIGNATURE-----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=YLBT
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Add a missing memory barrier in the concurrency ID mm switching
* tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Add missing memory barrier in switch_mm_cid
- Print the correct error code when FRED reports a bad event type
- Add a FRED-specific INT80 handler without the special dances that need
to happen in the current one
- Enable the using-the-default-return-thunk-but-you-should-not warning
only on configs which actually enable those special return thunks
- Check the proper feature flags when selecting BHI retpoline mitigation
-----BEGIN PGP SIGNATURE-----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=53Ih
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix CPU feature dependencies of GFNI, VAES, and VPCLMULQDQ
- Print the correct error code when FRED reports a bad event type
- Add a FRED-specific INT80 handler without the special dances that
need to happen in the current one
- Enable the using-the-default-return-thunk-but-you-should-not warning
only on configs which actually enable those special return thunks
- Check the proper feature flags when selecting BHI retpoline
mitigation
* tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ
x86/fred: Fix incorrect error code printout in fred_bad_type()
x86/fred: Fix INT80 emulation for FRED
x86/retpolines: Enable the default thunk warning only on relevant configs
x86/bugs: Fix BHI retpoline check
Now that NHLT support in ACPI framework was introduced, migrate avs
driver to new API.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240419084307.2718881-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM6240 family chips are popular among audio customers, in spite of only a
portion of the functionality of codec, such as ADC or DAC, and so on, for
different Specifications, range from Personal Electric to Automotive
Electric, even some professional fields. Yet their audio performance is far
superior to the codec's, and cost is lower than codec, and much easier to
program than codec.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240407091846.1299-5-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM6240 driver implements a flexible and configurable setting for register
and filter coefficients, to one, two or even multiple PCM6240 Family Audio
chips.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240407091846.1299-4-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM6240 driver implements a flexible and configurable setting for register
and filter coefficients, to one, two or even multiple PCM6240 Family Audio
chips.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240407091846.1299-3-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
