We need to use the mark we get from the tunnels o_key to
lookup the right vti state in the error handlers. This patch
ensures that.
Fixes: df3893c1 ("vti: Update the ipv4 side to use it's own receive hook.")
Fixes: fa9ad96d ("vti6: Update the ipv6 side to use its own receive hook.")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We currently count the size of LL_MAX_HEADER and struct iphdr
twice for vti4 devices, this leads to a wrong device mtu.
The size of LL_MAX_HEADER and struct iphdr is already counted in
ip_tunnel_bind_dev(), so don't do it again in vti_tunnel_init().
Fixes: b9959fd3 ("vti: switch to new ip tunnel code")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The tunnel endpoints of the xfrm_state we got from the xfrm_lookup
must match the tunnel endpoints of the vti interface. This patch
ensures this matching.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
With this patch we can tunnel ipv6 traffic via a vti4
interface. A vti4 interface can now have an ipv6 address
and ipv6 traffic can be routed via a vti4 interface.
The resulting traffic is xfrm transformed and tunneled
throuhg ipv4 if matching IPsec policies and states are
present.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We need to be protocol family indepenent to support
inter addresss family tunneling with vti. So use a
dst_entry instead of the ipv4 rtable in vti_tunnel_xmit.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
With this patch, vti uses the IPsec protocol multiplexer to
register it's own receive side hooks for ESP, AH and IPCOMP.
Vti now does the following on receive side:
1. Do an input policy check for the IPsec packet we received.
This is required because this packet could be already
prosecces by IPsec, so an inbuond policy check is needed.
2. Mark the packet with the i_key. The policy and the state
must match this key now. Policy and state belong to the outer
namespace and policy enforcement is done at the further layers.
3. Call the generic xfrm layer to do decryption and decapsulation.
4. Wait for a callback from the xfrm layer to properly clean the
skb to not leak informations on namespace and to update the
device statistics.
On transmit side:
1. Mark the packet with the o_key. The policy and the state
must match this key now.
2. Do a xfrm_lookup on the original packet with the mark applied.
3. Check if we got an IPsec route.
4. Clean the skb to not leak informations on namespace
transitions.
5. Attach the dst_enty we got from the xfrm_lookup to the skb.
6. Call dst_output to do the IPsec processing.
7. Do the device statistics.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Replace some dev_kfree_skb() with kfree_skb() calls when
we drop one skb, this might help bug tracking.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
They are same, so unify them as one, pcpu_sw_netstats.
Define pcpu_sw_netstat in netdevice.h, remove pcpu_tstats
from if_tunnel and remove br_cpu_netstats from br_private.h
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After searching rt by the vti tunnel dst/src parameter,
if this rt has neither attached to any transformation
nor the transformation is not tunnel oriented, this rt
should be released back to ip layer.
otherwise causing dst memory leakage.
Signed-off-by: Fan Du <fan.du@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/usb/qmi_wwan.c
include/net/dst.h
Trivial merge conflicts, both were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes and improves the use of vti interfaces (while
lightly changing the way of configuring them).
Currently:
- it is necessary to identify and mark inbound IPsec
packets destined to each vti interface, via netfilter rules in
the mangle table at prerouting hook.
- the vti module cannot retrieve the right tunnel in input since
commit b9959fd3: vti tunnels all have an i_key, but the tunnel lookup
is done with flag TUNNEL_NO_KEY, so there no chance to retrieve them.
- the i_key is used by the outbound processing as a mark to lookup
for the right SP and SA bundle.
This patch uses the o_key to store the vti mark (instead of i_key) and
enables:
- to avoid the need for previously marking the inbound skbuffs via a
netfilter rule.
- to properly retrieve the right tunnel in input, only based on the IPsec
packet outer addresses.
- to properly perform an inbound policy check (using the tunnel o_key
as a mark).
- to properly perform an outbound SPD and SAD lookup (using the tunnel
o_key as a mark).
- to keep the current mark of the skbuff. The skbuff mark is neither
used nor changed by the vti interface. Only the vti interface o_key
is used.
SAs have a wildcard mark.
SPs have a mark equal to the vti interface o_key.
The vti interface must be created as follows (i_key = 0, o_key = mark):
ip link add vti1 mode vti local 1.1.1.1 remote 2.2.2.2 okey 1
The SPs attached to vti1 must be created as follows (mark = vti1 o_key):
ip xfrm policy add dir out mark 1 tmpl src 1.1.1.1 dst 2.2.2.2 \
proto esp mode tunnel
ip xfrm policy add dir in mark 1 tmpl src 2.2.2.2 dst 1.1.1.1 \
proto esp mode tunnel
The SAs are created with the default wildcard mark. There is no
distinction between global vs. vti SAs. Just their addresses will
possibly link them to a vti interface:
ip xfrm state add src 1.1.1.1 dst 2.2.2.2 proto esp spi 1000 mode tunnel \
enc "cbc(aes)" "azertyuiopqsdfgh"
ip xfrm state add src 2.2.2.2 dst 1.1.1.1 proto esp spi 2000 mode tunnel \
enc "cbc(aes)" "sqbdhgqsdjqjsdfh"
To avoid matching "global" (not vti) SPs in vti interfaces, global SPs
should no use the default wildcard mark, but explicitly match mark 0.
To avoid a double SPD lookup in input and output (in global and vti SPDs),
the NOPOLICY and NOXFRM options should be set on the vti interfaces:
echo 1 > /proc/sys/net/ipv4/conf/vti1/disable_policy
echo 1 > /proc/sys/net/ipv4/conf/vti1/disable_xfrm
The outgoing traffic is steered to vti1 by a route via the vti interface:
ip route add 192.168.0.0/16 dev vti1
The incoming IPsec traffic is steered to vti1 because its outer addresses
match the vti1 tunnel configuration.
Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some thoughts on IPv4 VTI implementation:
The connection between VTI receiving part and xfrm tunnel mode input process
is hardly a "xfrm_tunnel", xfrm_tunnel is used in places where, e.g ipip/sit
and xfrm4_tunnel, acts like a true "tunnel" device.
In addition, IMHO, VTI doesn't need vti_err to do something meaningful, as all
VTI needs is just a notifier to be called whenever xfrm_input ingress a packet
to update statistics.
A IPsec protected packet is first handled by protocol handlers, e.g AH/ESP,
to check packet authentication or encryption rightness. PMTU update is taken
care of in this stage by protocol error handler.
Then the packet is rearranged properly depending on whether it's transport
mode or tunnel mode packed by mode "input" handler. The VTI handler code
takes effects in this stage in tunnel mode only. So it neither need propagate
PMTU, as it has already been done if necessary, nor the VTI handler is
qualified as a xfrm_tunnel.
So this patch introduces xfrm_tunnel_notifier and meanwhile wipe out vti_err
code.
Signed-off-by: Fan Du <fan.du@windriver.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Saurabh Mohan <saurabh.mohan@vyatta.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch allows to switch the netns when packet is encapsulated or
decapsulated. In other word, the encapsulated packet is received in a netns,
where the lookup is done to find the tunnel. Once the tunnel is found, the
packet is decapsulated and injecting into the corresponding interface which
stands to another netns.
When one of the two netns is removed, the tunnel is destroyed.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
GRE tunnel and IPIP tunnel already switched to the new
ip tunnel code, VTI tunnel can use it too.
Cc: Pravin B Shelar <pshelar@nicira.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Saurabh Mohan <saurabh.mohan@vyatta.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vti module allocates dev->tstats twice: in vti_fb_tunnel_init()
and in vti_tunnel_init(), this lead to a memory leak of
dev->tstats.
Just remove the duplicated operations in vti_fb_tunnel_init().
(candidate for -stable)
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Saurabh Mohan <saurabh.mohan@vyatta.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If users apply shaper to vti tunnel then it will cause a kernel crash. The
problem seems to be due to the vti_tunnel_xmit function not clearing
skb->opt field before passing the packet to xfrm tunneling code.
Signed-off-by: Saurabh Mohan <saurabh@vyatta.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use common function get calculate rtnl_link_stats64 stats.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following patch refactors GRE code into ip tunneling code and GRE
specific code. Common tunneling code is moved to ip_tunnel module.
ip_tunnel module is written as generic library which can be used
by different tunneling implementations.
ip_tunnel module contains following components:
- packet xmit and rcv generic code. xmit flow looks like
(gre_xmit/ipip_xmit)->ip_tunnel_xmit->ip_local_out.
- hash table of all devices.
- lookup for tunnel devices.
- control plane operations like device create, destroy, ioctl, netlink
operations code.
- registration for tunneling modules, like gre, ipip etc.
- define single pcpu_tstats dev->tstats.
- struct tnl_ptk_info added to pass parsed tunnel packet parameters.
ipip.h header is renamed to ip_tunnel.h
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow an unpriviled user who has created a user namespace, and then
created a network namespace to effectively use the new network
namespace, by reducing capable(CAP_NET_ADMIN) and
capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns,
CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls.
Settings that merely control a single network device are allowed.
Either the network device is a logical network device where
restrictions make no difference or the network device is hardware NIC
that has been explicity moved from the initial network namespace.
In general policy and network stack state changes are allowed
while resource control is left unchanged.
Allow creating raw sockets.
Allow the SIOCSARP ioctl to control the arp cache.
Allow the SIOCSIFFLAG ioctl to allow setting network device flags.
Allow the SIOCSIFADDR ioctl to allow setting a netdevice ipv4 address.
Allow the SIOCSIFBRDADDR ioctl to allow setting a netdevice ipv4 broadcast address.
Allow the SIOCSIFDSTADDR ioctl to allow setting a netdevice ipv4 destination address.
Allow the SIOCSIFNETMASK ioctl to allow setting a netdevice ipv4 netmask.
Allow the SIOCADDRT and SIOCDELRT ioctls to allow adding and deleting ipv4 routes.
Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for
adding, changing and deleting gre tunnels.
Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for
adding, changing and deleting ipip tunnels.
Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for
adding, changing and deleting ipsec virtual tunnel interfaces.
Allow setting the MRT_INIT, MRT_DONE, MRT_ADD_VIF, MRT_DEL_VIF, MRT_ADD_MFC,
MRT_DEL_MFC, MRT_ASSERT, MRT_PIM, MRT_TABLE socket options on multicast routing
sockets.
Allow setting and receiving IPOPT_CIPSO, IP_OPT_SEC, IP_OPT_SID and
arbitrary ip options.
Allow setting IP_SEC_POLICY/IP_XFRM_POLICY ipv4 socket option.
Allow setting the IP_TRANSPARENT ipv4 socket option.
Allow setting the TCP_REPAIR socket option.
Allow setting the TCP_CONGESTION socket option.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the latest kernel there are two things that must be done post decryption
so that the packet are forwarded.
1. Remove the mark from the packet. This will cause the packet to not match
the ipsec-policy again. However doing this causes the post-decryption check to
fail also and the packet will get dropped. (cat /proc/net/xfrm_stat).
2. Remove the sp association in the skbuff so that no policy check is done on
the packet for VTI tunnels.
Due to #2 above we must now do a security-policy check in the vti rcv path
prior to resetting the mark in the skbuff.
Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com>
Reported-by: Ruben Herold <ruben@puettmann.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The defitions of for_each_ip_tunnel_rcu() are same,
so unify it. Also, don't hide the parameter 't'.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__IPTUNNEL_XMIT() is an ugly macro, convert it to a static
inline function, so make it more readable.
IPTUNNEL_XMIT() is unused, just remove it.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use be32_to_cpu instead of htonl to keep sparse happy.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The handlers for xfrm_tunnel are always invoked with rcu read lock
already.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With CONFIG_SPARSE_RCU_POINTER=y sparse identified references which did not
specificy __rcu in ip_vti.c
Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New VTI tunnel kernel module, Kconfig and Makefile changes.
Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com>
Reviewed-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
