Now by splitting the base address from the register index we can
use the symbolic register names instead of the hard-coded numeric
values.
Link: https://lore.kernel.org/r/20200331094054.24441-8-w@1wt.eu
Cc: "David S. Miller" <davem@davemloft.net>
[willy: fix printk warnings s/%lx/%x/g in sun_82077_fd_{inb,outb}()]
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
The sparc port used to be forced to rely on numeric register indexes
with their equivalent in comments. Now that they don't depend on the
IO port we can use their symbolic names.
Link: https://lore.kernel.org/r/20200331094054.24441-7-w@1wt.eu
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do
this, and also use STATUS_DMA and STATUS_READY for the status bits.
Link: https://lore.kernel.org/r/20200331094054.24441-6-w@1wt.eu
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do
this, and also use STATUS_DMA and STATUS_READY for the status bits.
Link: https://lore.kernel.org/r/20200331094054.24441-5-w@1wt.eu
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do
this, and also use STATUS_DMA and STATUS_READY for the status bits.
Link: https://lore.kernel.org/r/20200331094054.24441-4-w@1wt.eu
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
This controller provides extra status registers SRA and SRB as well
as a tape drive register (TDR) and a data rate select register (DSR),
which are referenced in the sparc port, so let's have their symbolic
definitions centralized.
Link: https://lore.kernel.org/r/20200331094054.24441-3-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Currently we have architecture-specific fd_inb() and fd_outb() functions
or macros, taking just a port which is in fact made of a base address and
a register. The base address is FDC-specific and derived from the local or
global "fdc" variable through the FD_IOPORT macro used in the base address
calculation.
This change splits this by explicitly passing the FDC's base address and
the register separately to fd_outb() and fd_inb(). It affects the
following archs:
- x86, alpha, mips, powerpc, parisc, arm, m68k:
simple remap of port -> base+reg
- sparc32: use of reg only, since the base address was already masked
out and the FDC controller is known from a static struct.
- sparc64: like x86 for PCI, like sparc32 for 82077
Some archs use inline functions and others macros. This was not
unified in order to minimize the number of changes to review. For the
same reason checkpatch still spews a few warnings about things that
were already there before.
The parisc still uses hard-coded register values and could be cleaned up
by taking the register definitions.
The sparc per-controller inb/outb functions could further be refined
to explicitly take an FDC register instead of a port in argument but it
was not needed yet and may be cleaned later.
Link: https://lore.kernel.org/r/20200331094054.24441-2-w@1wt.eu
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: x86@kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Improve code readability by defining the specification's constants that
the driver is using when decoding identification payloads.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With reference to the NVMeOF Specification (page 44, Figure 38)
discovery log page entry provides address family field. We do set the
transport type field but the adrfam field is not set when using loop
transport and also it doesn't have support in the nvme-cli. So when
reading discovery log page with a loop transport it leads to confusing
output.
As per the spec for adrfam value 254 is reserved for Intra Host
Transport i.e. loopback), we add a required macro in the protocol
header file, set default port disc addr entry's adrfam to
NVMF_ADDR_FAMILY_MAX, and update nvmet_addr_family configfs array for
show/store attribute.
Without this patch, setting adrfam to (ipv4/ipv6/ib/fc/loop/" ") we get
following output for nvme discover command from nvme-cli which is
confusing.
trtype: loop
adrfam: ipv4
trtype: loop
adrfam: ipv6
trtype: loop
adrfam: infiniband
trtype: loop
adrfam: fibre-channel
trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop
adrfam: pci # <----- pci for loop
trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = " "
adrfam: pci # <----- pci for unrecognized
This patch fixes above output :-
trtype: loop
adrfam: ipv4
trtype: loop
adrfam: ipv6
trtype: loop
adrfam: infiniband
trtype: loop
adrfam: fibre-channel
trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop
adrfam: loop # <----- loop for loop
trtype: loop # ${CFGFS_HOME}/config/nvmet/ports/adrfam = " "
adrfam: unrecognized # <----- unrecognized when invalid value
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The configfs attributes which are supposed to set when port is disable
such as addr[addrfam|portid|traddr|treq|trsvcid|inline_data_size|trtype]
has repetitive check and generic error message printing.
This patch creates centralize helper to check and print an error
message that also accepts caller as a parameter. This makes error
message easy to parse for the user, removes the duplicate code and
makes it available for futures such scenarios.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently nvmet_addr_treq_[store|show]() uses switch and if else
ladder for address transport requirements to string and reverse
mapping. With addtion of the generic nvmet_type_name_map structure
we can get rid of the switch and if else ladder with string
duplication.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we have a generic type to name map for configfs, get rid of
the nvmet_ana_state_names structure and replace it with newly added
nvmet_type_name_map.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Right now nvmet_addr_adrfam_[store|show]() uses switch and if else
ladder for address family to string and reverse mapping which also
repeats the strings in show and store function.
With addition of generic nvmet_type_name_map structure we can now get rid
of the switch and if else ladder and string duplication.
Also, we add a newline in before found label in nvmet_addr_trtype_store()
which keeps goto label code consistent with
nvmet_allowed_hosts_drop_link(), nvmet_port_subsys_drop_link() and
nvmet_ana_group_ana_state_store().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds a new type to name mapping generic structure. It
replaces nvmet_transport_name with new generic mapping structure
nvmet_transport.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme-multipath already uses the gendisk private data, not need to
also set up the request_queue queuedata and use it in one place only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Today, nvme-tcp automatically schedules a send request
to a workqueue context, which is 1 more than we'd need
in case the socket buffer is wide open.
However, because we have async send activity (as a result
of r2t, or write_space callbacks), we need to synchronize
sends from possibly multiple contexts (ideally all running
on the same cpu though).
Thus, we only try to send directly from queue_rq in cases:
1. the send_list is empty
2. we can send it synchronously (i.e. not from the RX path)
3. we run on the same cpu as the queue->io_cpu to avoid
contention on the send operation.
Proposed-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the user runs polled I/O, we shouldn't have to trigger
the workqueue to generate the receive work upon the .data_ready
upcall. This prevents a redundant context switch when the
application is already polling for completions.
Proposed-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
data_ready may be invoked from send context or from
softirq, so need bh locking for that.
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 147b27e4bd ("nvme-pci: allocate device queues storage
space at probe"), nvme_alloc_queue does not alloc the nvme queues
itself anymore.
If the write/poll_queues module parameters are changed at runtime to
values larger than the number of allocated queues in nvme_probe,
nvme_alloc_queue will access unallocated memory.
Add a new nr_allocated_queues member to struct nvme_dev to record how
many queues were alloctated in nvme_probe to avoid using more than the
allocated queues after a reset following a change to the
write/poll_queues module parameters.
Also add nr_write_queues and nr_poll_queues members to allow refreshing
the number of write and poll queues based on a change to the module
parameters when resetting the controller.
Fixes: 147b27e4bd ("nvme-pci: allocate device queues storage space at probe")
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
[hch: add nvme_max_io_queues, update the commit message]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The nvme driver does not have enough tags to wrap the queue, and blk-mq
will no longer call commit_rqs() when there are no new submissions to
notify.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The completion queue entry is not volatile once the phase is confirmed.
Remove the volatile keywords and check the phase using the appropriate
READ_ONCE() accessor, allowing the compiler to optimize the remaining
completion path.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a passthrough command causes the namespace inventory or capabilities
to change, flush the scan work that handles these changes so the driver
synchronizes with the user command's effects before returning the result
to user space.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use a common label for putting the nshead if needed and only convert
nvme status codes for the one case where it actually is needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When CONFIG_ARCH_NO_SG_CHAIN is set, op->sgl[0] cannot be dereferenced,
as gcc-10 now points out:
drivers/nvme/host/fc.c: In function 'nvme_fc_init_request':
drivers/nvme/host/fc.c:1774:29: warning: array subscript 0 is outside the bounds of an interior zero-length array 'struct scatterlist[0]' [-Wzero-length-bounds]
1774 | op->op.fcp_req.first_sgl = &op->sgl[0];
| ^~~~~~~~~~~
drivers/nvme/host/fc.c:98:21: note: while referencing 'sgl'
98 | struct scatterlist sgl[NVME_INLINE_SG_CNT];
| ^~~
I don't know if this is a legitimate warning or a false-positive.
If this is just a false alarm, the warning is easily suppressed
by interpreting the array as a pointer.
Fixes: b1ae1a2389 ("nvme-fc: Avoid preallocating big SGL for data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for detecting capacity changes on nvmet blockdev and file
backed namespaces. This allows for emulating and testing online resizing
of nvme devices and filesystems on top.
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
[chaitanya: Fix comments posted on V1]
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
[hch: reuse code a bit more]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The stream parameters indicating optimal io settings were just getting
overwritten later. Rearrange the settings so the streams parameters can
be preserved if provided.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The stream parameters are based on the currently formatted logical block
size. Recheck these parameters on namespace revalidation so the
registered constraints will be accurate.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the quirked chunk_sectors setting to the same location as noiob so
one place registers this setting. And since the noiob value is only used
locally, remove the member from struct nvme_ns.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the namespace identifiers have changed, skip updating the disk
information, as that will register parameters from a mismatched
namespace.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The queues' backing device info capabilities don't change with each
namespace revalidation. Set it only when each path's request_queue
is initially added to a multipath queue.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reject a new shared namespace if a duplicate unshared namespace exists.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Even if a namespace reports it is not capable of sharing, search the
subsystem for a matching namespace head. If found, the driver should
reject that namespace since it's coming from an invalid configuration.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a namespace identification does not match the subsystem's head for
that NSID, release the reference that was taken when the matching head
was initially found.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The driver had been unlinking the namespace head from the subsystem's
list only after the last reference was released, and outside of the
list's subsys->lock protection.
There is no reason to track an empty head, so unlink the entry from the
subsystem's list when the last namespace using that head is removed and
with the mutex lock protecting the list update. The next namespace to
attach reusing the previous NSID will allocate a new head rather than
find the old head with mismatched identifiers.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace it with a value derived from the identify data and nsid sizes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The namespace lists are 0-terminated, so we don't really need the NN value
execept for the legacy sequential scan.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out a piece of deeply indented and logicaly separate code
from nvme_scan_ns_list into a new helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the check for the supported CNS value into nvme_scan_ns_list, and
limit the life time of the identify controller allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check if we can use Identify CNS values > 1, and refine
the Qemu quirk to not apply to reported versions larger than 1.1, as the
Qemu implementation had been fixed by then.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The kbuild tst robot flagged the following 3 issues:
Case 1)
>> drivers/nvme/target/fc.c:1201:37: warning: Either the condition
>> '!assoc' is redundant or there is possible null pointer dereference:
>> assoc. [nullPointerRedundantCheck]
>> struct nvmet_fc_tgtport *tgtport = assoc->tgtport;
^
>> drivers/nvme/target/fc.c:1853:7: note: Assuming that condition '!assoc'
>> is not redundant
>> if (!assoc)
^
>> drivers/nvme/target/fc.c:1850:37: note: Assignment
>> 'assoc=nvmet_fc_find_target_assoc(tgtport,be64_to_cpu(
>> rqst->associd.association_id))', assigned value is 0
>> assoc = nvmet_fc_find_target_assoc(tgtport,
^
>> drivers/nvme/target/fc.c:1896:31: note: Calling function
>> 'nvmet_fc_delete_target_assoc', 1st argument 'assoc' value is 0
>> nvmet_fc_delete_target_assoc(assoc);
^
The tool isn't smart enough to see that line 1854 sets a ret value which
thereafter causes the routine to exit. This occurs before any of the assoc
references, so it is not an issue. There are 2 more reportings of this
same failure.
To quiet the tool - rework the if test that does the exit to also
reference assoc. No change in logic otherwise.
Case 2)
drivers/nvme/target/fc.c:1202:29: warning: The scope of the variable
'queue' can be reduced. [variableScope]
struct nvmet_fc_tgt_queue *queue;
^
The tool is requesting the variable be declared within the code block
that utilizes it. Ignoring this report as existing code style is fine.
Case 3)
drivers/nvme/target/fc.c:1137:16: warning: Variable 'needrandom' is
assigned a value that is never used. [unreadVariable]
needrandom = true;
^
Another parsing issue with the tool. Given that parens were not used
with the list_for_each_entry() check, it inadvertantly thinks the
break exited the outer while loop not the inner for loop.
This is not an error. But, added parens to the inner list_for_each_entry()
to quiet the tool and as it is better coding style.
-- james
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reported-by: kbuild test robot <lkp@intel.com>
CC: kbuild test robot <lkp@intel.com>
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In order to save resource allocation and utilize the completion
locality in a better way (compared to SRQ per device that exist today),
allocate Shared Receive Queues (SRQs) per completion vector. Associate
each created QP/CQ with an appropriate SRQ according to the queue index.
This association will reduce the lock contention in the fast path
(compared to SRQ per device solution) and increase the locality in
memory buffers. Add new module parameter for SRQ size to adjust it
according to the expected load. User should make sure the size is >= 256
to avoid lack of resources. Also reduce the debug level of "last WQE
reached" event that is raised when a QP is using SRQ during destruction
process to relief the log.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_alloc_ns_head() doesn't use the 'struct nvme_id_ns' parameter.
Remove it, and update caller accordingly.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Various nvme commands use a zeroes based number of dwords field. Create
a helper function to convert byte lengths to this format.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that common helpers exist, add the ability to Send an NVME LS Request
and to Abort an outstanding LS Request to the nvmet side of the driver.
Signed-off-by: Paul Ely <paul.ely@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As the nvmet layer does not have the concept of a remoteport object, which
can be used to identify the entity on the other end of the fabric that is
to receive an LS, the hosthandle was introduced. The driver passes the
hosthandle, a value representative of the remote port, with a ls request
receive. The LS request will create the association. The transport will
remember the hosthandle for the association, and if there is a need to
initiate a LS request to the remote port for the association, the
hosthandle will be used. When the driver loses connectivity with the
remote port, it needs to notify the transport that the hosthandle is no
longer valid, allowing the transport to terminate associations related to
the hosthandle.
This patch adds support to the driver for the hosthandle. The driver will
use the ndlp pointer of the remote port for the hosthandle in calls to
nvmet_fc_rcv_ls_req(). The discovery engine is updated to invalidate the
hosthandle whenever connectivity with the remote port is lost.
Signed-off-by: Paul Ely <paul.ely@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that common helpers exist, add the ability to receive NVME LS requests
to the driver. New requests will be delivered to the transport by
nvme_fc_rcv_ls_req().
In order to complete the LS, add support for Send LS Response and send
LS response completion handling to the driver.
Signed-off-by: Paul Ely <paul.ely@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, the ability to send an NVME LS response is limited to the nvmet
(controller/target) side of the driver. In preparation of both the nvme
and nvmet sides supporting Send LS Response, rework the existing send
ls_rsp and ls_rsp completion routines such that there is common code that
can be used by both sides.
Signed-off-by: Paul Ely <paul.ely@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Send LS Abort support is needed when Send LS Request is supported.
Currently, the ability to abort an NVME LS request is limited to the nvme
(host) side of the driver. In preparation of both the nvme and nvmet sides
supporting Send LS Abort, rework the existing ls_req abort routines such
that there is common code that can be used by both sides.
While refactoring it was seen the logic in the abort routine was incorrect.
It attempted to abort all NVME LS's on the indicated port. As such, the
routine was reworked to abort only the NVME LS request that was specified.
Signed-off-by: Paul Ely <paul.ely@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, the ability to send an NVME LS request is limited to the nvme
(host) side of the driver. In preparation of both the nvme and nvmet sides
support Send LS Request, rework the existing send ls_req and ls_req
completion routines such that there is common code that can be used by
both sides.
Signed-off-by: Paul Ely <paul.ely@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for supporting both intiator mode and target mode
receiving NVME LS's, commonize the existing NVME LS request receive
handling found in the base driver and in the nvmet side.
Using the original lpfc_nvmet_unsol_ls_event() and
lpfc_nvme_unsol_ls_buffer() routines as a templates, commonize the
reception of an NVME LS request. The common routine will validate the LS
request, that it was received from a logged-in node, and allocate a
lpfc_async_xchg_ctx that is used to manage the LS request. The role of
the port is then inspected to determine which handler is to receive the
LS - nvme or nvmet. As such, the nvmet handler is tied back in. A handler
is created in nvme and is stubbed out.
Signed-off-by: Paul Ely <paul.ely@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
