Commit Graph

1353 Commits

Author SHA1 Message Date
Linus Torvalds
556eb8b791 Driver core changes for 6.4-rc1
Here is the large set of driver core changes for 6.4-rc1.
 
 Once again, a busy development cycle, with lots of changes happening in
 the driver core in the quest to be able to move "struct bus" and "struct
 class" into read-only memory, a task now complete with these changes.
 
 This will make the future rust interactions with the driver core more
 "provably correct" as well as providing more obvious lifetime rules for
 all busses and classes in the kernel.
 
 The changes required for this did touch many individual classes and
 busses as many callbacks were changed to take const * parameters
 instead.  All of these changes have been submitted to the various
 subsystem maintainers, giving them plenty of time to review, and most of
 them actually did so.
 
 Other than those changes, included in here are a small set of other
 things:
   - kobject logging improvements
   - cacheinfo improvements and updates
   - obligatory fw_devlink updates and fixes
   - documentation updates
   - device property cleanups and const * changes
   - firwmare loader dependency fixes.
 
 All of these have been in linux-next for a while with no reported
 problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
 LEGadNS38k5fs+73UaxV
 =7K4B
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the large set of driver core changes for 6.4-rc1.

  Once again, a busy development cycle, with lots of changes happening
  in the driver core in the quest to be able to move "struct bus" and
  "struct class" into read-only memory, a task now complete with these
  changes.

  This will make the future rust interactions with the driver core more
  "provably correct" as well as providing more obvious lifetime rules
  for all busses and classes in the kernel.

  The changes required for this did touch many individual classes and
  busses as many callbacks were changed to take const * parameters
  instead. All of these changes have been submitted to the various
  subsystem maintainers, giving them plenty of time to review, and most
  of them actually did so.

  Other than those changes, included in here are a small set of other
  things:

   - kobject logging improvements

   - cacheinfo improvements and updates

   - obligatory fw_devlink updates and fixes

   - documentation updates

   - device property cleanups and const * changes

   - firwmare loader dependency fixes.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
  device property: make device_property functions take const device *
  driver core: update comments in device_rename()
  driver core: Don't require dynamic_debug for initcall_debug probe timing
  firmware_loader: rework crypto dependencies
  firmware_loader: Strip off \n from customized path
  zram: fix up permission for the hot_add sysfs file
  cacheinfo: Add use_arch[|_cache]_info field/function
  arch_topology: Remove early cacheinfo error message if -ENOENT
  cacheinfo: Check cache properties are present in DT
  cacheinfo: Check sib_leaf in cache_leaves_are_shared()
  cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
  cacheinfo: Add arm64 early level initializer implementation
  cacheinfo: Add arch specific early level initializer
  tty: make tty_class a static const structure
  driver core: class: remove struct class_interface * from callbacks
  driver core: class: mark the struct class in struct class_interface constant
  driver core: class: make class_register() take a const *
  driver core: class: mark class_release() as taking a const *
  driver core: remove incorrect comment for device_create*
  MIPS: vpe-cmp: remove module owner pointer from struct class usage.
  ...
2023-04-27 11:53:57 -07:00
Linus Torvalds
ef36b9afc2 fget() to fdget() conversions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYCQAAKCRBZ7Krx/gZQ
 64FdAQDZ2hTDyZEWPt486dWYPYpiKyaGFXSXDGo7wgP0fiwxXQEA/mROKb6JqYw6
 27mZ9A7qluT8r3AfTTQ0D+Yse/dr4AM=
 =GA9W
 -----END PGP SIGNATURE-----

Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull vfs fget updates from Al Viro:
 "fget() to fdget() conversions"

* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fuse_dev_ioctl(): switch to fdget()
  cgroup_get_from_fd(): switch to fdget_raw()
  bpf: switch to fdget_raw()
  build_mount_idmapped(): switch to fdget()
  kill the last remaining user of proc_ns_fget()
  SVM-SEV: convert the rest of fget() uses to fdget() in there
  convert sgx_set_attribute() to fdget()/fdput()
  convert setns(2) to fdget()/fdput()
2023-04-24 19:14:20 -07:00
Al Viro
4a892c0fe4 fuse_dev_ioctl(): switch to fdget()
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-04-20 22:55:35 -04:00
Jens Axboe
de4f5fed3f iov_iter: add iter_iovec() helper
This returns a pointer to the current iovec entry in the iterator. Only
useful with ITER_IOVEC right now, but it prepares us to treat ITER_UBUF
and ITER_IOVEC identically for the first segment.

Rename struct iov_iter->iov to iov_iter->__iov to find any potentially
troublesome spots, and also to prevent anyone from adding new code that
accesses iter->iov directly.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-30 08:12:29 -06:00
Greg Kroah-Hartman
1aaba11da9 driver core: class: remove module * from class_create()
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something.  So just remove it and fix up all callers of the function in
the kernel tree at the same time.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-17 15:16:33 +01:00
Linus Torvalds
d40b2f4c94 fuse update for 6.3
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCY/ysqAAKCRDh3BK/laaZ
 PLSfAP9c4z/KOZj/Am8nQ0mqI8Ss0Ei+hyu8Vow6NoyJkR4NvwD/SxEeI2+rpXj7
 TGOA+6k4chLc7QIFBsIwGvQgeXld1gA=
 =s4b/
 -----END PGP SIGNATURE-----

Merge tag 'fuse-update-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse

Pull fuse updates from Miklos Szeredi:

 - Fix regression in fileattr permission checking

 - Fix possible hang during PID namespace destruction

 - Add generic support for request extensions

 - Add supplementary group list extension

 - Add limited support for supplying supplementary groups in create
   requests

 - Documentation fixes

* tag 'fuse-update-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: add inode/permission checks to fileattr_get/fileattr_set
  fuse: fix all W=1 kernel-doc warnings
  fuse: in fuse_flush only wait if someone wants the return code
  fuse: optional supplementary group in create requests
  fuse: add request extension
2023-02-27 09:53:58 -08:00
Linus Torvalds
3822a7c409 - Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
   memfd creation time, with the option of sealing the state of the X bit.
 
 - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
   thread-safe for pmd unshare") which addresses a rare race condition
   related to PMD unsharing.
 
 - Several folioification patch serieses from Matthew Wilcox, Vishal
   Moola, Sidhartha Kumar and Lorenzo Stoakes
 
 - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
   does perform some memcg maintenance and cleanup work.
 
 - SeongJae Park has added DAMOS filtering to DAMON, with the series
   "mm/damon/core: implement damos filter".  These filters provide users
   with finer-grained control over DAMOS's actions.  SeongJae has also done
   some DAMON cleanup work.
 
 - Kairui Song adds a series ("Clean up and fixes for swap").
 
 - Vernon Yang contributed the series "Clean up and refinement for maple
   tree".
 
 - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series.  It
   adds to MGLRU an LRU of memcgs, to improve the scalability of global
   reclaim.
 
 - David Hildenbrand has added some userfaultfd cleanup work in the
   series "mm: uffd-wp + change_protection() cleanups".
 
 - Christoph Hellwig has removed the generic_writepages() library
   function in the series "remove generic_writepages".
 
 - Baolin Wang has performed some maintenance on the compaction code in
   his series "Some small improvements for compaction".
 
 - Sidhartha Kumar is doing some maintenance work on struct page in his
   series "Get rid of tail page fields".
 
 - David Hildenbrand contributed some cleanup, bugfixing and
   generalization of pte management and of pte debugging in his series "mm:
   support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
   PTEs".
 
 - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
   flag in the series "Discard __GFP_ATOMIC".
 
 - Sergey Senozhatsky has improved zsmalloc's memory utilization with his
   series "zsmalloc: make zspage chain size configurable".
 
 - Joey Gouly has added prctl() support for prohibiting the creation of
   writeable+executable mappings.  The previous BPF-based approach had
   shortcomings.  See "mm: In-kernel support for memory-deny-write-execute
   (MDWE)".
 
 - Waiman Long did some kmemleak cleanup and bugfixing in the series
   "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
 
 - T.J.  Alumbaugh has contributed some MGLRU cleanup work in his series
   "mm: multi-gen LRU: improve".
 
 - Jiaqi Yan has provided some enhancements to our memory error
   statistics reporting, mainly by presenting the statistics on a per-node
   basis.  See the series "Introduce per NUMA node memory error
   statistics".
 
 - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
   regression in compaction via his series "Fix excessive CPU usage during
   compaction".
 
 - Christoph Hellwig does some vmalloc maintenance work in the series
   "cleanup vfree and vunmap".
 
 - Christoph Hellwig has removed block_device_operations.rw_page() in ths
   series "remove ->rw_page".
 
 - We get some maple_tree improvements and cleanups in Liam Howlett's
   series "VMA tree type safety and remove __vma_adjust()".
 
 - Suren Baghdasaryan has done some work on the maintainability of our
   vm_flags handling in the series "introduce vm_flags modifier functions".
 
 - Some pagemap cleanup and generalization work in Mike Rapoport's series
   "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
   "fixups for generic implementation of pfn_valid()"
 
 - Baoquan He has done some work to make /proc/vmallocinfo and
   /proc/kcore better represent the real state of things in his series
   "mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
 
 - Jason Gunthorpe rationalized the GUP system's interface to the rest of
   the kernel in the series "Simplify the external interface for GUP".
 
 - SeongJae Park wishes to migrate people from DAMON's debugfs interface
   over to its sysfs interface.  To support this, we'll temporarily be
   printing warnings when people use the debugfs interface.  See the series
   "mm/damon: deprecate DAMON debugfs interface".
 
 - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
   and clean-ups" series.
 
 - Huang Ying has provided a dramatic reduction in migration's TLB flush
   IPI rates with the series "migrate_pages(): batch TLB flushing".
 
 - Arnd Bergmann has some objtool fixups in "objtool warning fixes".
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
 jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
 DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
 =MlGs
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Daniel Verkamp has contributed a memfd series ("mm/memfd: add
   F_SEAL_EXEC") which permits the setting of the memfd execute bit at
   memfd creation time, with the option of sealing the state of the X
   bit.

 - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
   thread-safe for pmd unshare") which addresses a rare race condition
   related to PMD unsharing.

 - Several folioification patch serieses from Matthew Wilcox, Vishal
   Moola, Sidhartha Kumar and Lorenzo Stoakes

 - Johannes Weiner has a series ("mm: push down lock_page_memcg()")
   which does perform some memcg maintenance and cleanup work.

 - SeongJae Park has added DAMOS filtering to DAMON, with the series
   "mm/damon/core: implement damos filter".

   These filters provide users with finer-grained control over DAMOS's
   actions. SeongJae has also done some DAMON cleanup work.

 - Kairui Song adds a series ("Clean up and fixes for swap").

 - Vernon Yang contributed the series "Clean up and refinement for maple
   tree".

 - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
   adds to MGLRU an LRU of memcgs, to improve the scalability of global
   reclaim.

 - David Hildenbrand has added some userfaultfd cleanup work in the
   series "mm: uffd-wp + change_protection() cleanups".

 - Christoph Hellwig has removed the generic_writepages() library
   function in the series "remove generic_writepages".

 - Baolin Wang has performed some maintenance on the compaction code in
   his series "Some small improvements for compaction".

 - Sidhartha Kumar is doing some maintenance work on struct page in his
   series "Get rid of tail page fields".

 - David Hildenbrand contributed some cleanup, bugfixing and
   generalization of pte management and of pte debugging in his series
   "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
   swap PTEs".

 - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
   flag in the series "Discard __GFP_ATOMIC".

 - Sergey Senozhatsky has improved zsmalloc's memory utilization with
   his series "zsmalloc: make zspage chain size configurable".

 - Joey Gouly has added prctl() support for prohibiting the creation of
   writeable+executable mappings.

   The previous BPF-based approach had shortcomings. See "mm: In-kernel
   support for memory-deny-write-execute (MDWE)".

 - Waiman Long did some kmemleak cleanup and bugfixing in the series
   "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".

 - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
   "mm: multi-gen LRU: improve".

 - Jiaqi Yan has provided some enhancements to our memory error
   statistics reporting, mainly by presenting the statistics on a
   per-node basis. See the series "Introduce per NUMA node memory error
   statistics".

 - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
   regression in compaction via his series "Fix excessive CPU usage
   during compaction".

 - Christoph Hellwig does some vmalloc maintenance work in the series
   "cleanup vfree and vunmap".

 - Christoph Hellwig has removed block_device_operations.rw_page() in
   ths series "remove ->rw_page".

 - We get some maple_tree improvements and cleanups in Liam Howlett's
   series "VMA tree type safety and remove __vma_adjust()".

 - Suren Baghdasaryan has done some work on the maintainability of our
   vm_flags handling in the series "introduce vm_flags modifier
   functions".

 - Some pagemap cleanup and generalization work in Mike Rapoport's
   series "mm, arch: add generic implementation of pfn_valid() for
   FLATMEM" and "fixups for generic implementation of pfn_valid()"

 - Baoquan He has done some work to make /proc/vmallocinfo and
   /proc/kcore better represent the real state of things in his series
   "mm/vmalloc.c: allow vread() to read out vm_map_ram areas".

 - Jason Gunthorpe rationalized the GUP system's interface to the rest
   of the kernel in the series "Simplify the external interface for
   GUP".

 - SeongJae Park wishes to migrate people from DAMON's debugfs interface
   over to its sysfs interface. To support this, we'll temporarily be
   printing warnings when people use the debugfs interface. See the
   series "mm/damon: deprecate DAMON debugfs interface".

 - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
   and clean-ups" series.

 - Huang Ying has provided a dramatic reduction in migration's TLB flush
   IPI rates with the series "migrate_pages(): batch TLB flushing".

 - Arnd Bergmann has some objtool fixups in "objtool warning fixes".

* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
  include/linux/migrate.h: remove unneeded externs
  mm/memory_hotplug: cleanup return value handing in do_migrate_range()
  mm/uffd: fix comment in handling pte markers
  mm: change to return bool for isolate_movable_page()
  mm: hugetlb: change to return bool for isolate_hugetlb()
  mm: change to return bool for isolate_lru_page()
  mm: change to return bool for folio_isolate_lru()
  objtool: add UACCESS exceptions for __tsan_volatile_read/write
  kmsan: disable ftrace in kmsan core code
  kasan: mark addr_has_metadata __always_inline
  mm: memcontrol: rename memcg_kmem_enabled()
  sh: initialize max_mapnr
  m68k/nommu: add missing definition of ARCH_PFN_OFFSET
  mm: percpu: fix incorrect size in pcpu_obj_full_size()
  maple_tree: reduce stack usage with gcc-9 and earlier
  mm: page_alloc: call panic() when memoryless node allocation fails
  mm: multi-gen LRU: avoid futile retries
  migrate_pages: move THP/hugetlb migration support check to simplify code
  migrate_pages: batch flushing TLB
  migrate_pages: share more code between _unmap and _move
  ...
2023-02-23 17:09:35 -08:00
Linus Torvalds
05e6295f7b fs.idmapped.v6.3
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY+5NlQAKCRCRxhvAZXjc
 orOaAP9i2h3OJy95nO2Fpde0Bt2UT+oulKCCcGlvXJ8/+TQpyQD/ZQq47gFQ0EAz
 Br5NxeyGeecAb0lHpFz+CpLGsxMrMwQ=
 =+BG5
 -----END PGP SIGNATURE-----

Merge tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull vfs idmapping updates from Christian Brauner:

 - Last cycle we introduced the dedicated struct mnt_idmap type for
   mount idmapping and the required infrastucture in 256c8aed2b ("fs:
   introduce dedicated idmap type for mounts"). As promised in last
   cycle's pull request message this converts everything to rely on
   struct mnt_idmap.

   Currently we still pass around the plain namespace that was attached
   to a mount. This is in general pretty convenient but it makes it easy
   to conflate namespaces that are relevant on the filesystem with
   namespaces that are relevant on the mount level. Especially for
   non-vfs developers without detailed knowledge in this area this was a
   potential source for bugs.

   This finishes the conversion. Instead of passing the plain namespace
   around this updates all places that currently take a pointer to a
   mnt_userns with a pointer to struct mnt_idmap.

   Now that the conversion is done all helpers down to the really
   low-level helpers only accept a struct mnt_idmap argument instead of
   two namespace arguments.

   Conflating mount and other idmappings will now cause the compiler to
   complain loudly thus eliminating the possibility of any bugs. This
   makes it impossible for filesystem developers to mix up mount and
   filesystem idmappings as they are two distinct types and require
   distinct helpers that cannot be used interchangeably.

   Everything associated with struct mnt_idmap is moved into a single
   separate file. With that change no code can poke around in struct
   mnt_idmap. It can only be interacted with through dedicated helpers.
   That means all filesystems are and all of the vfs is completely
   oblivious to the actual implementation of idmappings.

   We are now also able to extend struct mnt_idmap as we see fit. For
   example, we can decouple it completely from namespaces for users that
   don't require or don't want to use them at all. We can also extend
   the concept of idmappings so we can cover filesystem specific
   requirements.

   In combination with the vfs{g,u}id_t work we finished in v6.2 this
   makes this feature substantially more robust and thus difficult to
   implement wrong by a given filesystem and also protects the vfs.

 - Enable idmapped mounts for tmpfs and fulfill a longstanding request.

   A long-standing request from users had been to make it possible to
   create idmapped mounts for tmpfs. For example, to share the host's
   tmpfs mount between multiple sandboxes. This is a prerequisite for
   some advanced Kubernetes cases. Systemd also has a range of use-cases
   to increase service isolation. And there are more users of this.

   However, with all of the other work going on this was way down on the
   priority list but luckily someone other than ourselves picked this
   up.

   As usual the patch is tiny as all the infrastructure work had been
   done multiple kernel releases ago. In addition to all the tests that
   we already have I requested that Rodrigo add a dedicated tmpfs
   testsuite for idmapped mounts to xfstests. It is to be included into
   xfstests during the v6.3 development cycle. This should add a slew of
   additional tests.

* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
  shmem: support idmapped mounts for tmpfs
  fs: move mnt_idmap
  fs: port vfs{g,u}id helpers to mnt_idmap
  fs: port fs{g,u}id helpers to mnt_idmap
  fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
  fs: port i_{g,u}id_{needs_}update() to mnt_idmap
  quota: port to mnt_idmap
  fs: port privilege checking helpers to mnt_idmap
  fs: port inode_owner_or_capable() to mnt_idmap
  fs: port inode_init_owner() to mnt_idmap
  fs: port acl to mnt_idmap
  fs: port xattr to mnt_idmap
  fs: port ->permission() to pass mnt_idmap
  fs: port ->fileattr_set() to pass mnt_idmap
  fs: port ->set_acl() to pass mnt_idmap
  fs: port ->get_acl() to pass mnt_idmap
  fs: port ->tmpfile() to pass mnt_idmap
  fs: port ->rename() to pass mnt_idmap
  fs: port ->mknod() to pass mnt_idmap
  fs: port ->mkdir() to pass mnt_idmap
  ...
2023-02-20 11:53:11 -08:00
Linus Torvalds
575a7e0f81 File locking changes for v6.3
-----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEES8DXskRxsqGE6vXTAA5oQRlWghUFAmPuC5kTHGpsYXl0b25A
 a2VybmVsLm9yZwAKCRAADmhBGVaCFdXpEADFN/loTtcANLPQmLmgmJLDuZr2zKrf
 aziMJRjqGMx6BLdwBgX8/XGBNwpG4tkVbI+zdRoVHkpcayMDpLq0dnrvi79a/dGU
 fBrI72ZDMd/S9lzbodObHMziLqvgFthsPm9ldVAZ2Kt400KKNE+ozcveiC3yVGy0
 n1k5BSt/78abzpqut5whVgJBooHtUMCh3XvBJPKwgOneHfAXCm+jqaXlKKpKlpZj
 s2OUyn8BLfNkTgpAZ88L5Rkf0mftjziL6C8KOMy1hvOsyiP0IkwLuQ/kO+2H0Ate
 p3tbOGvUT+n1gYpFYBDLnuWB4G8+CVPxfoO6KGhwT4OlCJpPlNCM8O+w/A/dKn4I
 858spkpYPMy91lEkcrRLRkg/MARWGTgZ3k76fp3OWNnfruWd6ekMlYKx9n6CIy34
 Aoc3Svy9KeA7oRrbRDltmw3UVmz53GcDo337ZL1J6Jph3s86dMG7AwGYvoDfKuKK
 b0oNK5db5v50scBnRHX6UWejE5fSnnHvgC7pU57u08odCVEUALB+r8f04vmkxcVJ
 Qed7lolQdFzn9ddaOXzpg5KeCe/cX3p4IPZSTHad7CPr8gswmC135DfXCr64x2hC
 5jyNzKbe/x+7B2xCweHmEk4ojt8IU3UaYxLJoQkNeVr8rEGC9gqZgkSDe7BnTpOf
 wT0ijzhy2u5RKg==
 =Zhf3
 -----END PGP SIGNATURE-----

Merge tag 'locks-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux

Pull file locking updates from Jeff Layton:
 "The main change here is that I've broken out most of the file locking
  definitions into a new header file. I also went ahead and completed
  the removal of locks_inode function"

* tag 'locks-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  fs: remove locks_inode
  filelock: move file locking definitions to separate header file
2023-02-20 11:10:38 -08:00
Suren Baghdasaryan
1c71222e5f mm: replace vma->vm_flags direct modifications with modifier calls
Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma locking
correctness.

[akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo]
Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-09 16:51:39 -08:00
Matthew Wilcox (Oracle)
d585bdbeb7 fs: convert writepage_t callback to pass a folio
Patch series "Convert writepage_t to use a folio".

More folioisation.  I split out the mpage work from everything else
because it completely dominated the patch, but some implementations I just
converted outright.


This patch (of 2):

We always write back an entire folio, but that's currently passed as the
head page.  Convert all filesystems that use write_cache_pages() to expect
a folio instead of a page.

Link: https://lkml.kernel.org/r/20230126201255.1681189-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230126201255.1681189-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-02 22:33:34 -08:00
Alexander Mikhalitsyn
1cc4606d19 fuse: add inode/permission checks to fileattr_get/fileattr_set
It looks like these checks were accidentally lost during the conversion to
fileattr API.

Fixes: 72227eac17 ("fuse: convert to fileattr")
Cc: <stable@vger.kernel.org> # v5.13
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2023-01-26 17:22:04 +01:00
Randy Dunlap
06bbb761c1 fuse: fix all W=1 kernel-doc warnings
Use correct function name in kernel-doc notation. (1)
Don't use "/**" to begin non-kernel-doc comments. (3)

Fixes these warnings:

fs/fuse/cuse.c:272: warning: expecting prototype for cuse_parse_dev_info(). Prototype was for cuse_parse_devinfo() instead
fs/fuse/dev.c:212: warning: expecting prototype for A new request is available, wake fiq(). Prototype was for fuse_dev_wake_and_unlock() instead
fs/fuse/dir.c:149: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Mark the attributes as stale due to an atime change.  Avoid the invalidate if
fs/fuse/file.c:656: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * In case of short read, the caller sets 'pos' to the position of

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2023-01-26 17:10:58 +01:00
Eric W. Biederman
5a8bee63b1 fuse: in fuse_flush only wait if someone wants the return code
If a fuse filesystem is mounted inside a container, there is a problem
during pid namespace destruction. The scenario is:

1. task (a thread in the fuse server, with a fuse file open) starts
   exiting, does exit_signals(), goes into fuse_flush() -> wait
2. fuse daemon gets killed, tries to wake everyone up
3. task from 1 is stuck because complete_signal() doesn't wake it up, since
   it has PF_EXITING.

The result is that the thread will never be woken up, and pid namespace
destruction will block indefinitely.

To add insult to injury, nobody is waiting for these return codes, since
the pid namespace is being destroyed.

To fix this, let's not block on flush operations when the current task has
PF_EXITING.

This does change the semantics slightly: the wait here is for posix locks
to be unlocked, so the task will exit before things are unlocked. To quote
Miklos:

  "remote" posix locks are almost never used due to problems like this, so
  I think it's safe to do this.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Link: https://lore.kernel.org/all/YrShFXRLtRt6T%2Fj+@risky/
Tested-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2023-01-26 17:10:58 +01:00
Miklos Szeredi
8ed7cb3f27 fuse: optional supplementary group in create requests
Permission to create an object (create, mkdir, symlink, mknod) needs to
take supplementary groups into account.

Add a supplementary group request extension.  This can contain an arbitrary
number of group IDs and can be added to any request.  This extension is not
added to any request by default.

Add FUSE_CREATE_SUPP_GROUP init flag to enable supplementary group info in
creation requests.  This adds just a single supplementary group that
matches the parent group in the case described above.  In other cases the
extension is not added.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2023-01-26 17:10:38 +01:00
Miklos Szeredi
15d937d7ca fuse: add request extension
Will need to add supplementary groups to create messages, so add the
general concept of a request extension.  A request extension is appended to
the end of the main request.  It has a header indicating the size and type
of the extension.

The create security context (fuse_secctx_*) is similar to the generic
request extension, so include that as well in a backward compatible manner.

Add the total extension length to the request header.  The offset of the
extension block within the request can be calculated by:

  inh->len - inh->total_extlen * 8

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2023-01-26 17:10:37 +01:00
Christian Brauner
facd61053c
fuse: fixes after adapting to new posix acl api
This cycle we ported all filesystems to the new posix acl api. While
looking at further simplifications in this area to remove the last
remnants of the generic dummy posix acl handlers we realized that we
regressed fuse daemons that don't set FUSE_POSIX_ACL but still make use
of posix acls.

With the change to a dedicated posix acl api interacting with posix acls
doesn't go through the old xattr codepaths anymore and instead only
relies the get acl and set acl inode operations.

Before this change fuse daemons that don't set FUSE_POSIX_ACL were able
to get and set posix acl albeit with two caveats. First, that posix acls
aren't cached. And second, that they aren't used for permission checking
in the vfs.

We regressed that use-case as we currently refuse to retrieve any posix
acls if they aren't enabled via FUSE_POSIX_ACL. So older fuse daemons
would see a change in behavior.

We can restore the old behavior in multiple ways. We could change the
new posix acl api and look for a dedicated xattr handler and if we find
one prefer that over the dedicated posix acl api. That would break the
consistency of the new posix acl api so we would very much prefer not to
do that.

We could introduce a new ACL_*_CACHE sentinel that would instruct the
vfs permission checking codepath to not call into the filesystem and
ignore acls.

But a more straightforward fix for v6.2 is to do the same thing that
Overlayfs does and give fuse a separate get acl method for permission
checking. Overlayfs uses this to express different needs for vfs
permission lookup and acl based retrieval via the regular system call
path as well. Let fuse do the same for now. This way fuse can continue
to refuse to retrieve posix acls for daemons that don't set
FUSE_POSXI_ACL for permission checking while allowing a fuse server to
retrieve it via the usual system calls.

In the future, we could extend the get acl inode operation to not just
pass a simple boolean to indicate rcu lookup but instead make it a flag
argument. Then in addition to passing the information that this is an
rcu lookup to the filesystem we could also introduce a flag that tells
the filesystem that this is a request from the vfs to use these acls for
permission checking. Then fuse could refuse the get acl request for
permission checking when the daemon doesn't have FUSE_POSIX_ACL set in
the same get acl method. This would also help Overlayfs and allow us to
remove the second method for it as well.

But since that change is more invasive as we need to update the get acl
inode operation for multiple filesystems we should not do this as a fix
for v6.2. Instead we will do this for the v6.3 merge window.

Fwiw, since posix acls are now always correctly translated in the new
posix acl api we could also allow them to be used for daemons without
FUSE_POSIX_ACL that are not mounted on the host. But this is behavioral
change and again if dones should be done for v6.3. For now, let's just
restore the original behavior.

A nice side-effect of this change is that for fuse daemons with and
without FUSE_POSIX_ACL the same code is used for posix acls in a
backwards compatible way. This also means we can remove the legacy xattr
handlers completely. We've also added comments to explain the expected
behavior for daemons without FUSE_POSIX_ACL into the code.

Fixes: 318e66856d ("xattr: use posix acl api")
Signed-off-by: Seth Forshee (Digital Ocean) <sforshee@kernel.org>
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-24 16:33:37 +01:00
Christian Brauner
e67fe63341
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
Convert to struct mnt_idmap.
Remove legacy file_mnt_user_ns() and mnt_user_ns().

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:29 +01:00
Christian Brauner
9452e93e6d
fs: port privilege checking helpers to mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:29 +01:00
Christian Brauner
39f60c1cce
fs: port xattr to mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:28 +01:00
Christian Brauner
4609e1f18e
fs: port ->permission() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:28 +01:00
Christian Brauner
8782a9aea3
fs: port ->fileattr_set() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:27 +01:00
Christian Brauner
13e83a4923
fs: port ->set_acl() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:27 +01:00
Christian Brauner
011e2b717b
fs: port ->tmpfile() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:27 +01:00
Christian Brauner
e18275ae55
fs: port ->rename() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:26 +01:00
Christian Brauner
5ebb29bee8
fs: port ->mknod() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:26 +01:00
Christian Brauner
c54bd91e9e
fs: port ->mkdir() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:26 +01:00
Christian Brauner
7a77db9551
fs: port ->symlink() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:25 +01:00
Christian Brauner
6c960e68aa
fs: port ->create() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:25 +01:00
Christian Brauner
b74d24f7a7
fs: port ->getattr() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:25 +01:00
Christian Brauner
c1632a0f11
fs: port ->setattr() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:02 +01:00
Jeff Layton
5970e15dbc filelock: move file locking definitions to separate header file
The file locking definitions have lived in fs.h since the dawn of time,
but they are only used by a small subset of the source files that
include it.

Move the file locking definitions to a new header file, and add the
appropriate #include directives to the source files that need them. By
doing this we trim down fs.h a bit and limit the amount of rebuilding
that has to be done when we make changes to the file locking APIs.

Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Steve French <stfrench@microsoft.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
2023-01-11 06:52:32 -05:00
Linus Torvalds
e2ca6ba6ba MM patches for 6.2-rc1.
- More userfaultfs work from Peter Xu.
 
 - Several convert-to-folios series from Sidhartha Kumar and Huang Ying.
 
 - Some filemap cleanups from Vishal Moola.
 
 - David Hildenbrand added the ability to selftest anon memory COW handling.
 
 - Some cpuset simplifications from Liu Shixin.
 
 - Addition of vmalloc tracing support by Uladzislau Rezki.
 
 - Some pagecache folioifications and simplifications from Matthew Wilcox.
 
 - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it.
 
 - Miguel Ojeda contributed some cleanups for our use of the
   __no_sanitize_thread__ gcc keyword.  This series shold have been in the
   non-MM tree, my bad.
 
 - Naoya Horiguchi improved the interaction between memory poisoning and
   memory section removal for huge pages.
 
 - DAMON cleanups and tuneups from SeongJae Park
 
 - Tony Luck fixed the handling of COW faults against poisoned pages.
 
 - Peter Xu utilized the PTE marker code for handling swapin errors.
 
 - Hugh Dickins reworked compound page mapcount handling, simplifying it
   and making it more efficient.
 
 - Removal of the autonuma savedwrite infrastructure from Nadav Amit and
   David Hildenbrand.
 
 - zram support for multiple compression streams from Sergey Senozhatsky.
 
 - David Hildenbrand reworked the GUP code's R/O long-term pinning so
   that drivers no longer need to use the FOLL_FORCE workaround which
   didn't work very well anyway.
 
 - Mel Gorman altered the page allocator so that local IRQs can remnain
   enabled during per-cpu page allocations.
 
 - Vishal Moola removed the try_to_release_page() wrapper.
 
 - Stefan Roesch added some per-BDI sysfs tunables which are used to
   prevent network block devices from dirtying excessive amounts of
   pagecache.
 
 - David Hildenbrand did some cleanup and repair work on KSM COW
   breaking.
 
 - Nhat Pham and Johannes Weiner have implemented writeback in zswap's
   zsmalloc backend.
 
 - Brian Foster has fixed a longstanding corner-case oddity in
   file[map]_write_and_wait_range().
 
 - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
   Chen.
 
 - Shiyang Ruan has done some work on fsdax, to make its reflink mode
   work better under xfstests.  Better, but still not perfect.
 
 - Christoph Hellwig has removed the .writepage() method from several
   filesystems.  They only need .writepages().
 
 - Yosry Ahmed wrote a series which fixes the memcg reclaim target
   beancounting.
 
 - David Hildenbrand has fixed some of our MM selftests for 32-bit
   machines.
 
 - Many singleton patches, as usual.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5j6ZwAKCRDdBJ7gKXxA
 jkDYAP9qNeVqp9iuHjZNTqzMXkfmJPsw2kmy2P+VdzYVuQRcJgEAgoV9d7oMq4ml
 CodAgiA51qwzId3GRytIo/tfWZSezgA=
 =d19R
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - More userfaultfs work from Peter Xu

 - Several convert-to-folios series from Sidhartha Kumar and Huang Ying

 - Some filemap cleanups from Vishal Moola

 - David Hildenbrand added the ability to selftest anon memory COW
   handling

 - Some cpuset simplifications from Liu Shixin

 - Addition of vmalloc tracing support by Uladzislau Rezki

 - Some pagecache folioifications and simplifications from Matthew
   Wilcox

 - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use
   it

 - Miguel Ojeda contributed some cleanups for our use of the
   __no_sanitize_thread__ gcc keyword.

   This series should have been in the non-MM tree, my bad

 - Naoya Horiguchi improved the interaction between memory poisoning and
   memory section removal for huge pages

 - DAMON cleanups and tuneups from SeongJae Park

 - Tony Luck fixed the handling of COW faults against poisoned pages

 - Peter Xu utilized the PTE marker code for handling swapin errors

 - Hugh Dickins reworked compound page mapcount handling, simplifying it
   and making it more efficient

 - Removal of the autonuma savedwrite infrastructure from Nadav Amit and
   David Hildenbrand

 - zram support for multiple compression streams from Sergey Senozhatsky

 - David Hildenbrand reworked the GUP code's R/O long-term pinning so
   that drivers no longer need to use the FOLL_FORCE workaround which
   didn't work very well anyway

 - Mel Gorman altered the page allocator so that local IRQs can remnain
   enabled during per-cpu page allocations

 - Vishal Moola removed the try_to_release_page() wrapper

 - Stefan Roesch added some per-BDI sysfs tunables which are used to
   prevent network block devices from dirtying excessive amounts of
   pagecache

 - David Hildenbrand did some cleanup and repair work on KSM COW
   breaking

 - Nhat Pham and Johannes Weiner have implemented writeback in zswap's
   zsmalloc backend

 - Brian Foster has fixed a longstanding corner-case oddity in
   file[map]_write_and_wait_range()

 - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
   Chen

 - Shiyang Ruan has done some work on fsdax, to make its reflink mode
   work better under xfstests. Better, but still not perfect

 - Christoph Hellwig has removed the .writepage() method from several
   filesystems. They only need .writepages()

 - Yosry Ahmed wrote a series which fixes the memcg reclaim target
   beancounting

 - David Hildenbrand has fixed some of our MM selftests for 32-bit
   machines

 - Many singleton patches, as usual

* tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits)
  mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio
  mm: mmu_gather: allow more than one batch of delayed rmaps
  mm: fix typo in struct pglist_data code comment
  kmsan: fix memcpy tests
  mm: add cond_resched() in swapin_walk_pmd_entry()
  mm: do not show fs mm pc for VM_LOCKONFAULT pages
  selftests/vm: ksm_functional_tests: fixes for 32bit
  selftests/vm: cow: fix compile warning on 32bit
  selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions
  mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem
  mm,thp,rmap: fix races between updates of subpages_mapcount
  mm: memcg: fix swapcached stat accounting
  mm: add nodes= arg to memory.reclaim
  mm: disable top-tier fallback to reclaim on proactive reclaim
  selftests: cgroup: make sure reclaim target memcg is unprotected
  selftests: cgroup: refactor proactive reclaim code to reclaim_until()
  mm: memcg: fix stale protection of reclaim target memcg
  mm/mmap: properly unaccount memory on mas_preallocate() failure
  omfs: remove ->writepage
  jfs: remove ->writepage
  ...
2022-12-13 19:29:45 -08:00
Linus Torvalds
043930b1c8 fuse update for 6.2
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCY5cH0wAKCRDh3BK/laaZ
 PAIJAQC658ZaXRgWBZ/XmCqbb+c8g/InrccE+PXhtVGYTiWTiwD/ZEy7r/X/uJaO
 gb5anxJT5jVJ9Qfk1VbyZqdwqUqydAo=
 =If6t
 -----END PGP SIGNATURE-----

Merge tag 'fuse-update-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse

Pull fuse update from Miklos Szeredi:

 - Allow some write requests to proceed in parallel

 - Fix a performance problem with allow_sys_admin_access

 - Add a special kind of invalidation that doesn't immediately purge
   submounts

 - On revalidation treat the target of rename(RENAME_NOREPLACE) the same
   as open(O_EXCL)

 - Use type safe helpers for some mnt_userns transformations

* tag 'fuse-update-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: Rearrange fuse_allow_current_process checks
  fuse: allow non-extending parallel direct writes on the same file
  fuse: remove the unneeded result variable
  fuse: port to vfs{g,u}id_t and associated helpers
  fuse: Remove user_ns check for FUSE_DEV_IOC_CLONE
  fuse: always revalidate rename target dentry
  fuse: add "expire only" mode to FUSE_NOTIFY_INVAL_ENTRY
  fs/fuse: Replace kmap() with kmap_local_page()
2022-12-12 20:22:09 -08:00
Linus Torvalds
e1212e9b6f fs.vfsuid.conversion.v6.2
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY5bspgAKCRCRxhvAZXjc
 opEWAQDpF5rnZn1vv4/uOTij9ztcA4yLxu/Q19CdqBaoHlWZ9AD/d3eecee3bh5h
 iPHtlUK5/VspfD9LPpdc5ZbPCdZ2pA4=
 =t6NN
 -----END PGP SIGNATURE-----

Merge tag 'fs.vfsuid.conversion.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull vfsuid updates from Christian Brauner:
 "Last cycle we introduced the vfs{g,u}id_t types and associated helpers
  to gain type safety when dealing with idmapped mounts. That initial
  work already converted a lot of places over but there were still some
  left,

  This converts all remaining places that still make use of non-type
  safe idmapping helpers to rely on the new type safe vfs{g,u}id based
  helpers.

  Afterwards it removes all the old non-type safe helpers"

* tag 'fs.vfsuid.conversion.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  fs: remove unused idmapping helpers
  ovl: port to vfs{g,u}id_t and associated helpers
  fuse: port to vfs{g,u}id_t and associated helpers
  ima: use type safe idmapping helpers
  apparmor: use type safe idmapping helpers
  caps: use type safe idmapping helpers
  fs: use type safe idmapping helpers
  mnt_idmapping: add missing helpers
2022-12-12 19:20:05 -08:00
Linus Torvalds
cf619f8919 fs.ovl.setgid.v6.2
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY5bt7AAKCRCRxhvAZXjc
 ovAOAP9qcrUqs2MoyBDe6qUXThYY9w2rgX/ZI4ZZmbtsXEDGtQEA/LPddq8lD8o9
 m17zpvMGbXXRwz4/zVGuyWsHgg0HsQ0=
 =ioRq
 -----END PGP SIGNATURE-----

Merge tag 'fs.ovl.setgid.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull setgid inheritance updates from Christian Brauner:
 "This contains the work to make setgid inheritance consistent between
  modifying a file and when changing ownership or mode as this has been
  a repeated source of very subtle bugs. The gist is that we perform the
  same permission checks in the write path as we do in the ownership and
  mode changing paths after this series where we're currently doing
  different things.

  We've already made setgid inheritance a lot more consistent and
  reliable in the last releases by moving setgid stripping from the
  individual filesystems up into the vfs. This aims to make the logic
  even more consistent and easier to understand and also to fix
  long-standing overlayfs setgid inheritance bugs. Miklos was nice
  enough to just let me carry the trivial overlayfs patches from Amir
  too.

  Below is a more detailed explanation how the current difference in
  setgid handling lead to very subtle bugs exemplified via overlayfs
  which is a victim of the current rules. I hope this explains why I
  think taking the regression risk here is worth it.

  A long while ago I found a few setgid inheritance bugs in overlayfs in
  the write path in certain conditions. Amir recently picked this back
  up in [1] and I jumped on board to fix this more generally.

  On the surface all that overlayfs would need to fix setgid inheritance
  would be to call file_remove_privs() or file_modified() but actually
  that isn't enough because the setgid inheritance api is wildly
  inconsistent in that area.

  Before this pr setgid stripping in file_remove_privs()'s old
  should_remove_suid() helper was inconsistent with other parts of the
  vfs. Specifically, it only raises ATTR_KILL_SGID if the inode is
  S_ISGID and S_IXGRP but not if the inode isn't in the caller's groups
  and the caller isn't privileged over the inode although we require
  this already in setattr_prepare() and setattr_copy() and so all
  filesystem implement this requirement implicitly because they have to
  use setattr_{prepare,copy}() anyway.

  But the inconsistency shows up in setgid stripping bugs for overlayfs
  in xfstests (e.g., generic/673, generic/683, generic/685, generic/686,
  generic/687). For example, we test whether suid and setgid stripping
  works correctly when performing various write-like operations as an
  unprivileged user (fallocate, reflink, write, etc.):

      echo "Test 1 - qa_user, non-exec file $verb"
      setup_testfile
      chmod a+rws $junk_file
      commit_and_check "$qa_user" "$verb" 64k 64k

  The test basically creates a file with 6666 permissions. While the
  file has the S_ISUID and S_ISGID bits set it does not have the S_IXGRP
  set.

  On a regular filesystem like xfs what will happen is:

      sys_fallocate()
      -> vfs_fallocate()
         -> xfs_file_fallocate()
            -> file_modified()
               -> __file_remove_privs()
                  -> dentry_needs_remove_privs()
                     -> should_remove_suid()
                  -> __remove_privs()
                     newattrs.ia_valid = ATTR_FORCE | kill;
                     -> notify_change()
                        -> setattr_copy()

  In should_remove_suid() we can see that ATTR_KILL_SUID is raised
  unconditionally because the file in the test has S_ISUID set.

  But we also see that ATTR_KILL_SGID won't be set because while the
  file is S_ISGID it is not S_IXGRP (see above) which is a condition for
  ATTR_KILL_SGID being raised.

  So by the time we call notify_change() we have attr->ia_valid set to
  ATTR_KILL_SUID | ATTR_FORCE.

  Now notify_change() sees that ATTR_KILL_SUID is set and does:

      ia_valid      = attr->ia_valid |= ATTR_MODE
      attr->ia_mode = (inode->i_mode & ~S_ISUID);

  which means that when we call setattr_copy() later we will definitely
  update inode->i_mode. Note that attr->ia_mode still contains S_ISGID.

  Now we call into the filesystem's ->setattr() inode operation which
  will end up calling setattr_copy(). Since ATTR_MODE is set we will
  hit:

      if (ia_valid & ATTR_MODE) {
              umode_t mode = attr->ia_mode;
              vfsgid_t vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
              if (!vfsgid_in_group_p(vfsgid) &&
                  !capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
                      mode &= ~S_ISGID;
              inode->i_mode = mode;
      }

  and since the caller in the test is neither capable nor in the group
  of the inode the S_ISGID bit is stripped.

  But assume the file isn't suid then ATTR_KILL_SUID won't be raised
  which has the consequence that neither the setgid nor the suid bits
  are stripped even though it should be stripped because the inode isn't
  in the caller's groups and the caller isn't privileged over the inode.

  If overlayfs is in the mix things become a bit more complicated and
  the bug shows up more clearly.

  When e.g., ovl_setattr() is hit from ovl_fallocate()'s call to
  file_remove_privs() then ATTR_KILL_SUID and ATTR_KILL_SGID might be
  raised but because the check in notify_change() is questioning the
  ATTR_KILL_SGID flag again by requiring S_IXGRP for it to be stripped
  the S_ISGID bit isn't removed even though it should be stripped:

      sys_fallocate()
      -> vfs_fallocate()
         -> ovl_fallocate()
            -> file_remove_privs()
               -> dentry_needs_remove_privs()
                  -> should_remove_suid()
               -> __remove_privs()
                  newattrs.ia_valid = ATTR_FORCE | kill;
                  -> notify_change()
                     -> ovl_setattr()
                        /* TAKE ON MOUNTER'S CREDS */
                        -> ovl_do_notify_change()
                           -> notify_change()
                        /* GIVE UP MOUNTER'S CREDS */
           /* TAKE ON MOUNTER'S CREDS */
           -> vfs_fallocate()
              -> xfs_file_fallocate()
                 -> file_modified()
                    -> __file_remove_privs()
                       -> dentry_needs_remove_privs()
                          -> should_remove_suid()
                       -> __remove_privs()
                          newattrs.ia_valid = attr_force | kill;
                          -> notify_change()

  The fix for all of this is to make file_remove_privs()'s
  should_remove_suid() helper perform the same checks as we already
  require in setattr_prepare() and setattr_copy() and have
  notify_change() not pointlessly requiring S_IXGRP again. It doesn't
  make any sense in the first place because the caller must calculate
  the flags via should_remove_suid() anyway which would raise
  ATTR_KILL_SGID

  Note that some xfstests will now fail as these patches will cause the
  setgid bit to be lost in certain conditions for unprivileged users
  modifying a setgid file when they would've been kept otherwise. I
  think this risk is worth taking and I explained and mentioned this
  multiple times on the list [2].

  Enforcing the rules consistently across write operations and
  chmod/chown will lead to losing the setgid bit in cases were it
  might've been retained before.

  While I've mentioned this a few times but it's worth repeating just to
  make sure that this is understood. For the sake of maintainability,
  consistency, and security this is a risk worth taking.

  If we really see regressions for workloads the fix is to have special
  setgid handling in the write path again with different semantics from
  chmod/chown and possibly additional duct tape for overlayfs. I'll
  update the relevant xfstests with if you should decide to merge this
  second setgid cleanup.

  Before that people should be aware that there might be failures for
  fstests where unprivileged users modify a setgid file"

Link: https://lore.kernel.org/linux-fsdevel/20221003123040.900827-1-amir73il@gmail.com [1]
Link: https://lore.kernel.org/linux-fsdevel/20221122142010.zchf2jz2oymx55qi@wittgenstein [2]

* tag 'fs.ovl.setgid.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  fs: use consistent setgid checks in is_sxid()
  ovl: remove privs in ovl_fallocate()
  ovl: remove privs in ovl_copyfile()
  attr: use consistent sgid stripping checks
  attr: add setattr_should_drop_sgid()
  fs: move should_remove_suid()
  attr: add in_group_or_capable()
2022-12-12 19:03:10 -08:00
Linus Torvalds
6a518afcc2 fs.acl.rework.v6.2
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY5bwTgAKCRCRxhvAZXjc
 ovd2AQCK00NAtGjQCjQPQGyTa4GAPqvWgq1ef0lnhv+TL5US5gD9FncQ8UofeMXt
 pBfjtAD6ettTPCTxUQfnTwWEU4rc7Qg=
 =27Wm
 -----END PGP SIGNATURE-----

Merge tag 'fs.acl.rework.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull VFS acl updates from Christian Brauner:
 "This contains the work that builds a dedicated vfs posix acl api.

  The origins of this work trace back to v5.19 but it took quite a while
  to understand the various filesystem specific implementations in
  sufficient detail and also come up with an acceptable solution.

  As we discussed and seen multiple times the current state of how posix
  acls are handled isn't nice and comes with a lot of problems: The
  current way of handling posix acls via the generic xattr api is error
  prone, hard to maintain, and type unsafe for the vfs until we call
  into the filesystem's dedicated get and set inode operations.

  It is already the case that posix acls are special-cased to death all
  the way through the vfs. There are an uncounted number of hacks that
  operate on the uapi posix acl struct instead of the dedicated vfs
  struct posix_acl. And the vfs must be involved in order to interpret
  and fixup posix acls before storing them to the backing store, caching
  them, reporting them to userspace, or for permission checking.

  Currently a range of hacks and duct tape exist to make this work. As
  with most things this is really no ones fault it's just something that
  happened over time. But the code is hard to understand and difficult
  to maintain and one is constantly at risk of introducing bugs and
  regressions when having to touch it.

  Instead of continuing to hack posix acls through the xattr handlers
  this series builds a dedicated posix acl api solely around the get and
  set inode operations.

  Going forward, the vfs_get_acl(), vfs_remove_acl(), and vfs_set_acl()
  helpers must be used in order to interact with posix acls. They
  operate directly on the vfs internal struct posix_acl instead of
  abusing the uapi posix acl struct as we currently do. In the end this
  removes all of the hackiness, makes the codepaths easier to maintain,
  and gets us type safety.

  This series passes the LTP and xfstests suites without any
  regressions. For xfstests the following combinations were tested:
   - xfs
   - ext4
   - btrfs
   - overlayfs
   - overlayfs on top of idmapped mounts
   - orangefs
   - (limited) cifs

  There's more simplifications for posix acls that we can make in the
  future if the basic api has made it.

  A few implementation details:

   - The series makes sure to retain exactly the same security and
     integrity module permission checks. Especially for the integrity
     modules this api is a win because right now they convert the uapi
     posix acl struct passed to them via a void pointer into the vfs
     struct posix_acl format to perform permission checking on the mode.

     There's a new dedicated security hook for setting posix acls which
     passes the vfs struct posix_acl not a void pointer. Basing checking
     on the posix acl stored in the uapi format is really unreliable.
     The vfs currently hacks around directly in the uapi struct storing
     values that frankly the security and integrity modules can't
     correctly interpret as evidenced by bugs we reported and fixed in
     this area. It's not necessarily even their fault it's just that the
     format we provide to them is sub optimal.

   - Some filesystems like 9p and cifs need access to the dentry in
     order to get and set posix acls which is why they either only
     partially or not even at all implement get and set inode
     operations. For example, cifs allows setxattr() and getxattr()
     operations but doesn't allow permission checking based on posix
     acls because it can't implement a get acl inode operation.

     Thus, this patch series updates the set acl inode operation to take
     a dentry instead of an inode argument. However, for the get acl
     inode operation we can't do this as the old get acl method is
     called in e.g., generic_permission() and inode_permission(). These
     helpers in turn are called in various filesystem's permission inode
     operation. So passing a dentry argument to the old get acl inode
     operation would amount to passing a dentry to the permission inode
     operation which we shouldn't and probably can't do.

     So instead of extending the existing inode operation Christoph
     suggested to add a new one. He also requested to ensure that the
     get and set acl inode operation taking a dentry are consistently
     named. So for this version the old get acl operation is renamed to
     ->get_inode_acl() and a new ->get_acl() inode operation taking a
     dentry is added. With this we can give both 9p and cifs get and set
     acl inode operations and in turn remove their complex custom posix
     xattr handlers.

     In the future I hope to get rid of the inode method duplication but
     it isn't like we have never had this situation. Readdir is just one
     example. And frankly, the overall gain in type safety and the more
     pleasant api wise are simply too big of a benefit to not accept
     this duplication for a while.

   - We've done a full audit of every codepaths using variant of the
     current generic xattr api to get and set posix acls and
     surprisingly it isn't that many places. There's of course always a
     chance that we might have missed some and if so I'm sure we'll find
     them soon enough.

     The crucial codepaths to be converted are obviously stacking
     filesystems such as ecryptfs and overlayfs.

     For a list of all callers currently using generic xattr api helpers
     see [2] including comments whether they support posix acls or not.

   - The old vfs generic posix acl infrastructure doesn't obey the
     create and replace semantics promised on the setxattr(2) manpage.
     This patch series doesn't address this. It really is something we
     should revisit later though.

  The patches are roughly organized as follows:

   (1) Change existing set acl inode operation to take a dentry
       argument (Intended to be a non-functional change)

   (2) Rename existing get acl method (Intended to be a non-functional
       change)

   (3) Implement get and set acl inode operations for filesystems that
       couldn't implement one before because of the missing dentry.
       That's mostly 9p and cifs (Intended to be a non-functional
       change)

   (4) Build posix acl api, i.e., add vfs_get_acl(), vfs_remove_acl(),
       and vfs_set_acl() including security and integrity hooks
       (Intended to be a non-functional change)

   (5) Implement get and set acl inode operations for stacking
       filesystems (Intended to be a non-functional change)

   (6) Switch posix acl handling in stacking filesystems to new posix
       acl api now that all filesystems it can stack upon support it.

   (7) Switch vfs to new posix acl api (semantical change)

   (8) Remove all now unused helpers

   (9) Additional regression fixes reported after we merged this into
       linux-next

  Thanks to Seth for a lot of good discussion around this and
  encouragement and input from Christoph"

* tag 'fs.acl.rework.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (36 commits)
  posix_acl: Fix the type of sentinel in get_acl
  orangefs: fix mode handling
  ovl: call posix_acl_release() after error checking
  evm: remove dead code in evm_inode_set_acl()
  cifs: check whether acl is valid early
  acl: make vfs_posix_acl_to_xattr() static
  acl: remove a slew of now unused helpers
  9p: use stub posix acl handlers
  cifs: use stub posix acl handlers
  ovl: use stub posix acl handlers
  ecryptfs: use stub posix acl handlers
  evm: remove evm_xattr_acl_change()
  xattr: use posix acl api
  ovl: use posix acl api
  ovl: implement set acl method
  ovl: implement get acl method
  ecryptfs: implement set acl method
  ecryptfs: implement get acl method
  ksmbd: use vfs_remove_acl()
  acl: add vfs_remove_acl()
  ...
2022-12-12 18:46:39 -08:00
Linus Torvalds
75f4d9af8b iov_iter work; most of that is about getting rid of
direction misannotations and (hopefully) preventing
 more of the same for the future.
 
 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 -----BEGIN PGP SIGNATURE-----
 
 iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
 65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
 MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
 =bcvF
 -----END PGP SIGNATURE-----

Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull iov_iter updates from Al Viro:
 "iov_iter work; most of that is about getting rid of direction
  misannotations and (hopefully) preventing more of the same for the
  future"

* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  use less confusing names for iov_iter direction initializers
  iov_iter: saner checks for attempt to copy to/from iterator
  [xen] fix "direction" argument of iov_iter_kvec()
  [vhost] fix 'direction' argument of iov_iter_{init,bvec}()
  [target] fix iov_iter_bvec() "direction" argument
  [s390] memcpy_real(): WRITE is "data source", not destination...
  [s390] zcore: WRITE is "data source", not destination...
  [infiniband] READ is "data destination", not source...
  [fsi] WRITE is "data source", not destination...
  [s390] copy_oldmem_kernel() - WRITE is "data source", not destination
  csum_and_copy_to_iter(): handle ITER_DISCARD
  get rid of unlikely() on page_copy_sane() calls
2022-12-12 18:29:54 -08:00
Vishal Moola (Oracle)
063aaad792 fuse: convert fuse_try_move_page() to use folios
Converts the function to try to move folios instead of pages. Also
converts fuse_check_page() to fuse_get_folio() since this is its only
caller. This change removes 15 calls to compound_head().

Link: https://lkml.kernel.org/r/20221101175326.13265-3-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-11 18:12:12 -08:00
Vishal Moola (Oracle)
3720dd6dca filemap: convert replace_page_cache_page() to replace_page_cache_folio()
Patch series "Removing the lru_cache_add() wrapper".

This patchset replaces all calls of lru_cache_add() with the folio
equivalent: folio_add_lru().  This is allows us to get rid of the wrapper
The series passes xfstests and the userfaultfd selftests.


This patch (of 5):

Eliminates 7 calls to compound_head().

Link: https://lkml.kernel.org/r/20221101175326.13265-1-vishal.moola@gmail.com
Link: https://lkml.kernel.org/r/20221101175326.13265-2-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-11 18:12:12 -08:00
Al Viro
de4eda9de2 use less confusing names for iov_iter direction initializers
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.

Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-11-25 13:01:55 -05:00
Dave Marchevsky
b138777786 fuse: Rearrange fuse_allow_current_process checks
This is a followup to a previous commit of mine [0], which added the
allow_sys_admin_access && capable(CAP_SYS_ADMIN) check.  This patch
rearranges the order of checks in fuse_allow_current_process without
changing functionality.

Commit 9ccf47b26b ("fuse: Add module param for CAP_SYS_ADMIN access
bypassing allow_other") added allow_sys_admin_access &&
capable(CAP_SYS_ADMIN) check to the beginning of the function, with the
reasoning that allow_sys_admin_access should be an 'escape hatch' for users
with CAP_SYS_ADMIN, allowing them to skip any subsequent checks.

However, placing this new check first results in many capable() calls when
allow_sys_admin_access is set, where another check would've also returned
1.  This can be problematic when a BPF program is tracing capable() calls.

At Meta we ran into such a scenario recently.  On a host where
allow_sys_admin_access is set but most of the FUSE access is from processes
which would pass other checks - i.e.  they don't need CAP_SYS_ADMIN 'escape
hatch' - this results in an unnecessary capable() call for each fs op.  We
also have a daemon tracing capable() with BPF and doing some data
collection, so tracing these extraneous capable() calls has the potential
to regress performance for an application doing many FUSE ops.

So rearrange the order of these checks such that CAP_SYS_ADMIN 'escape
hatch' is checked last.  Add a small helper, fuse_permissible_uidgid, to
make the logic easier to understand.  Previously, if allow_other is set on
the fuse_conn, uid/git checking doesn't happen as current_in_userns result
is returned.  These semantics are maintained here: fuse_permissible_uidgid
check only happens if allow_other is not set.

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2022-11-23 09:10:50 +01:00
Dharmendra Singh
153524053b fuse: allow non-extending parallel direct writes on the same file
In general, as of now, in FUSE, direct writes on the same file are
serialized over inode lock i.e we hold inode lock for the full duration of
the write request.  I could not find in fuse code and git history a comment
which clearly explains why this exclusive lock is taken for direct writes.
Following might be the reasons for acquiring an exclusive lock but not be
limited to

 1) Our guess is some USER space fuse implementations might be relying on
    this lock for serialization.

 2) The lock protects against file read/write size races.

 3) Ruling out any issues arising from partial write failures.

This patch relaxes the exclusive lock for direct non-extending writes only.
File size extending writes might not need the lock either, but we are not
entirely sure if there is a risk to introduce any kind of regression.
Furthermore, benchmarking with fio does not show a difference between patch
versions that take on file size extension a) an exclusive lock and b) a
shared lock.

A possible example of an issue with i_size extending writes are write error
cases.  Some writes might succeed and others might fail for file system
internal reasons - for example ENOSPACE.  With parallel file size extending
writes it _might_ be difficult to revert the action of the failing write,
especially to restore the right i_size.

With these changes, we allow non-extending parallel direct writes on the
same file with the help of a flag called FOPEN_PARALLEL_DIRECT_WRITES.  If
this flag is set on the file (flag is passed from libfuse to fuse kernel as
part of file open/create), we do not take exclusive lock anymore, but
instead use a shared lock that allows non-extending writes to run in
parallel.  FUSE implementations which rely on this inode lock for
serialization can continue to do so and serialized direct writes are still
the default.  Implementations that do not do write serialization need to be
updated and need to set the FOPEN_PARALLEL_DIRECT_WRITES flag in their file
open/create reply.

On patch review there were concerns that network file systems (or vfs
multiple mounts of the same file system) might have issues with parallel
writes.  We believe this is not the case, as this is just a local lock,
which network file systems could not rely on anyway.  I.e. this lock is
just for local consistency.

Signed-off-by: Dharmendra Singh <dsingh@ddn.com>
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2022-11-23 09:10:50 +01:00
ye xingchen
e2283a7366 fuse: remove the unneeded result variable
Return the value fuse_dev_release() directly instead of storing it in
another redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2022-11-23 09:10:49 +01:00
Christian Brauner
00d369bc2d fuse: port to vfs{g,u}id_t and associated helpers
A while ago we introduced a dedicated vfs{g,u}id_t type in commit
1e5267cd08 ("mnt_idmapping: add vfs{g,u}id_t").  We already switched over
a good part of the VFS.  Ultimately we will remove all legacy idmapped
mount helpers that operate only on k{g,u}id_t in favor of the new type safe
helpers that operate on vfs{g,u}id_t.

Cc: Seth Forshee (Digital Ocean) <sforshee@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2022-11-23 09:10:49 +01:00
Jann Horn
0618021e34 fuse: Remove user_ns check for FUSE_DEV_IOC_CLONE
Commit 8ed1f0e22f ("fs/fuse: fix ioctl type confusion") fixed a type
confusion bug by adding an ->f_op comparison.

Based on some off-list discussion back then, another check was added to
compare the f_cred->user_ns.  This is not for security reasons, but was
based on the idea that a FUSE device FD should be using the UID/GID
mappings of its f_cred->user_ns, and those translations are done using
fc->user_ns, which matches the f_cred->user_ns of the initial FUSE device
FD thanks to the check in fuse_fill_super().  See also commit 8cb08329b0
("fuse: Support fuse filesystems outside of init_user_ns").

But FUSE_DEV_IOC_CLONE is, at a higher level, a *cloning* operation that
copies an existing context (with a weird API that involves first opening
/dev/fuse, then tying the resulting new FUSE device FD to an existing FUSE
instance).  So if an application is already passing FUSE FDs across userns
boundaries and dealing with the resulting ID mapping complications somehow,
it doesn't make much sense to block this cloning operation.

I've heard that this check is an obstacle for some folks, and I don't see a
good reason to keep it, so remove it.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2022-11-23 09:10:49 +01:00
Jiachen Zhang
ccc031e26a fuse: always revalidate rename target dentry
The previous commit df8629af29 ("fuse: always revalidate if exclusive
create") ensures that the dentries are revalidated on O_EXCL creates.  This
commit complements it by also performing revalidation for rename target
dentries.  Otherwise, a rename target file that only exists in kernel
dentry cache but not in the filesystem will result in EEXIST if
RENAME_NOREPLACE flag is used.

Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2022-11-23 09:10:49 +01:00
Miklos Szeredi
4f8d37020e fuse: add "expire only" mode to FUSE_NOTIFY_INVAL_ENTRY
Add a flag to entry expiration that lets the filesystem expire a dentry
without kicking it out from the cache immediately.

This makes a difference for overmounted dentries, where plain invalidation
would detach all submounts before dropping the dentry from the cache.  If
only expiry is set on the dentry, then any overmounts are left alone and
until ->d_revalidate() is called.

Note: ->d_revalidate() is not called for the case of following a submount,
so invalidation will only be triggered for the non-overmounted case.  The
dentry could also be mounted in a different mount instance, in which case
any submounts will still be detached.

Suggested-by: Jakob Blomer <jblomer@cern.ch>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2022-11-23 09:10:49 +01:00
Fabio M. De Francesco
a1db2f7ede fs/fuse: Replace kmap() with kmap_local_page()
The use of kmap() is being deprecated in favor of kmap_local_page().

There are two main problems with kmap(): (1) It comes with an overhead as
the mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap’s pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.

With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and still valid.

Therefore, replace kmap() with kmap_local_page() in fuse_readdir_cached(), 
it being the only call site of kmap() currently left in fs/fuse.

Cc: "Venkataramanan, Anirudh" <anirudh.venkataramanan@intel.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2022-11-23 09:10:49 +01:00
Miklos Szeredi
44361e8cf9 fuse: lock inode unconditionally in fuse_fallocate()
file_modified() must be called with inode lock held.  fuse_fallocate()
didn't lock the inode in case of just FALLOC_KEEP_SIZE flags value, which
resulted in a kernel Warning in notify_change().

Lock the inode unconditionally, like all other fallocate implementations
do.

Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Reported-and-tested-by: syzbot+462da39f0667b357c4b6@syzkaller.appspotmail.com
Fixes: 4a6f278d48 ("fuse: add file_modified() to fallocate")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2022-11-23 09:10:42 +01:00