Fixes the following W=1 kernel build warning(s):
drivers/soc/qcom/rpmh.c:266: warning: Function parameter or member 'dev' not described in 'rpmh_write'
drivers/soc/qcom/rpmh.c:266: warning: Excess function parameter 'rc' description in 'rpmh_write'
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201103152838.1290217-16-lee.jones@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/soc/qcom/kryo-l2-accessors.c:25: warning: Function parameter or member 'val' not described in 'kryo_l2_set_indirect_reg'
drivers/soc/qcom/kryo-l2-accessors.c:25: warning: Excess function parameter 'value' description in 'kryo_l2_set_indirect_reg'
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201103152838.1290217-23-lee.jones@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/soc/qcom/rpmhpd.c:52: warning: Function parameter or member 'parent' not described in 'rpmhpd'
drivers/soc/qcom/rpmhpd.c:52: warning: Function parameter or member 'corner' not described in 'rpmhpd'
drivers/soc/qcom/rpmhpd.c:52: warning: Function parameter or member 'active_corner' not described in 'rpmhpd'
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201103152838.1290217-22-lee.jones@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes the following W=1 kernel build warning:
drivers/soc/qcom/smp2p.c:149: warning: Function parameter or member 'out' not described in 'qcom_smp2p'
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201103152838.1290217-20-lee.jones@linaro.org
[bjorn: Dropped hunk that fixed the same warning in smp2p_smem_item]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/soc/qcom/wcnss_ctrl.c:81: warning: Function parameter or member 'major' not described in 'wcnss_version_resp'
drivers/soc/qcom/wcnss_ctrl.c:81: warning: Function parameter or member 'minor' not described in 'wcnss_version_resp'
drivers/soc/qcom/wcnss_ctrl.c:81: warning: Function parameter or member 'version' not described in 'wcnss_version_resp'
drivers/soc/qcom/wcnss_ctrl.c:81: warning: Function parameter or member 'revision' not described in 'wcnss_version_resp'
drivers/soc/qcom/wcnss_ctrl.c:122: warning: Function parameter or member 'rpdev' not described in 'wcnss_ctrl_smd_callback'
drivers/soc/qcom/wcnss_ctrl.c:122: warning: Function parameter or member 'priv' not described in 'wcnss_ctrl_smd_callback'
drivers/soc/qcom/wcnss_ctrl.c:122: warning: Function parameter or member 'addr' not described in 'wcnss_ctrl_smd_callback'
drivers/soc/qcom/wcnss_ctrl.c:122: warning: Excess function parameter 'channel' description in 'wcnss_ctrl_smd_callback'
drivers/soc/qcom/wcnss_ctrl.c:272: warning: Function parameter or member 'priv' not described in 'qcom_wcnss_open_channel'
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201103152838.1290217-19-lee.jones@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/soc/qcom/smsm.c:140: warning: Function parameter or member 'mask' not described in 'smsm_update_bits'
drivers/soc/qcom/smsm.c:140: warning: Excess function parameter 'offset' description in 'smsm_update_bits'
drivers/soc/qcom/smsm.c:257: warning: bad line:
drivers/soc/qcom/smsm.c:260: warning: bad line:
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201103152838.1290217-18-lee.jones@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/soc/qcom/smem.c:135: warning: Function parameter or member 'toc' not described in 'smem_header'
drivers/soc/qcom/smem.c:275: warning: Function parameter or member 'socinfo' not described in 'qcom_smem'
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201103152838.1290217-17-lee.jones@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/soc/qcom/qcom-geni-se.c:85: warning: Cannot understand * @struct geni_wrapper - Data structure to represent the QUP Wrapper Core
drivers/soc/qcom/qcom-geni-se.c:246: warning: Function parameter or member 'rx_rfr' not described in 'geni_se_init'
drivers/soc/qcom/qcom-geni-se.c:246: warning: Excess function parameter 'rx_rfr_wm' description in 'geni_se_init'
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201103152838.1290217-13-lee.jones@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/soc/qcom/qcom_aoss.c:86: warning: Function parameter or member 'cooling_devs' not described in 'qmp'
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201103152838.1290217-4-lee.jones@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/soc/qcom/qcom_aoss.c: In function ‘qmp_send’:
drivers/soc/qcom/qcom_aoss.c:228:9: warning: variable ‘tlen’ set but not used [-Wunused-but-set-variable]
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201103152838.1290217-3-lee.jones@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/soc/tegra/fuse/speedo-tegra210.c: In function ‘tegra210_init_speedo_data’:
drivers/soc/tegra/fuse/speedo-tegra210.c:105:56: warning: variable ‘soc_iddq’ set but not used [-Wunused-but-set-variable]
drivers/soc/tegra/fuse/speedo-tegra210.c:105:46: warning: variable ‘gpu_iddq’ set but not used [-Wunused-but-set-variable]
drivers/soc/tegra/fuse/speedo-tegra210.c:105:36: warning: variable ‘cpu_iddq’ set but not used [-Wunused-but-set-variable]
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[treding@nvidia.com: remove unnecessary reads altogether]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/soc/tegra/fuse/speedo-tegra124.c: In function ‘tegra124_init_speedo_data’:
drivers/soc/tegra/fuse/speedo-tegra124.c:105:38: warning: variable ‘soc_iddq_value’ set but not used [-Wunused-but-set-variable]
drivers/soc/tegra/fuse/speedo-tegra124.c:105:22: warning: variable ‘gpu_iddq_value’ set but not used [-Wunused-but-set-variable]
drivers/soc/tegra/fuse/speedo-tegra124.c:105:6: warning: variable ‘cpu_iddq_value’ set but not used [-Wunused-but-set-variable]
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[treding@nvidia.com: remove unnecessary reads altogether]
Signed-off-by: Thierry Reding <treding@nvidia.com>
The tegra_read_ram_code() is used by EMC drivers and we're going to make
these driver modular, hence this function needs to be exported.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201104164923.21238-3-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
brcmstb_pm_s3_finish() cannot be made static because it is referenced
from brcmstb_pm_s3(), so let's provide a prototype for it instead.
Fixes the following W=1 kernel build warning(s):
drivers/soc/bcm/brcmstb/pm/pm-arm.c:395:14: warning: no previous prototype for ‘brcmstb_pm_s3_finish’ [-Wmissing-prototypes]
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
dpaa_eth_napi_schedule() and caam_qi_napi_schedule() schedule NAPI if
invoked from:
- Hard interrupt context
- Any context which is not serving soft interrupts
Any context which is not serving soft interrupts includes hard interrupts
so the in_irq() check is redundant. caam_qi_napi_schedule() has a comment
about this:
/*
* In case of threaded ISR, for RT kernels in_irq() does not return
* appropriate value, so use in_serving_softirq to distinguish between
* softirq and irq contexts.
*/
if (in_irq() || !in_serving_softirq())
This has nothing to do with RT. Even on a non RT kernel force threaded
interrupts run obviously in thread context and therefore in_irq() returns
false when invoked from the handler.
The extension of the in_irq() check with !in_serving_softirq() was there
when the drivers were added, but in the out of tree FSL BSP the original
condition was in_irq() which got extended due to failures on RT.
The usage of in_xxx() in drivers is phased out and Linus clearly requested
that code which changes behaviour depending on context should either be
separated or the context be conveyed in an argument passed by the caller,
which usually knows the context. Right he is, the above construct is
clearly showing why.
The following callchains have been analyzed to end up in
dpaa_eth_napi_schedule():
qman_p_poll_dqrr()
__poll_portal_fast()
fq->cb.dqrr()
dpaa_eth_napi_schedule()
portal_isr()
__poll_portal_fast()
fq->cb.dqrr()
dpaa_eth_napi_schedule()
Both need to schedule NAPI.
The crypto part has another code path leading up to this:
kill_fq()
empty_retired_fq()
qman_p_poll_dqrr()
__poll_portal_fast()
fq->cb.dqrr()
dpaa_eth_napi_schedule()
kill_fq() is called from task context and ends up scheduling NAPI, but
that's pointless and an unintended side effect of the !in_serving_softirq()
check.
The code path:
caam_qi_poll() -> qman_p_poll_dqrr()
is invoked from NAPI and I *assume* from crypto's NAPI device and not
from qbman's NAPI device. I *guess* it is okay to skip scheduling NAPI
(because this is what happens now) but could be changed if it is wrong
due to `budget' handling.
Add an argument to __poll_portal_fast() which is true if NAPI needs to be
scheduled. This requires propagating the value to the caller including
`qman_cb_dqrr' typedef which is used by the dpaa and the crypto driver.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Herbert XS <herbert@gondor.apana.org.au>
Cc: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Tested-by: Camelia Groza <camelia.groza@nxp.com>
Fixes the following W=1 kernel build warning(s):
drivers/soc/samsung/s3c-pm-check.c:162: warning: Function parameter or member 'val' not described in 's3c_pm_runcheck'
drivers/soc/samsung/s3c-pm-check.c:162: warning: Excess function parameter 'vak' description in 's3c_pm_runcheck'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Ben Dooks <ben@simtec.co.uk>
Link: https://lore.kernel.org/r/20201103152838.1290217-15-lee.jones@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
In RING mode the ringacc does not access the ring memory. In this access
mode the ringacc coherency does not have meaning.
If the ring is configured in RING mode, then the ringacc itself will not
access to the ring memory. Only the requester (user) of the ring is going
to read/write to the memory.
Extend the ring configuration parameters with a device pointer to be used
for DMA API when the ring is configured in RING mode.
Extending the ring configuration struct will allow per ring selection of
device to be used for allocation, thus allowing per ring coherency.
To avoid regression, fall back to use the ringacc dev in case the alloc_dev
is not provided.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Switch to the new set_cfg to configure the ring.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Allocate MSI entries for both first and second range if they are valid
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
K2G devices still only use single parameter for power-domains property,
so check for this properly in the driver. Without this, every peripheral
fails to probe resulting in boot failure.
Link: https://lore.kernel.org/r/20201029093337.21170-1-t-kristo@ti.com
Fixes: efa5c01cd7 ("soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one")
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Exynos clock output (clkout) driver uses same register address space
(Power Management Unit address space) as Exynos PMU driver and same set
of compatibles. It was modeled as clock provider instantiated with
CLK_OF_DECLARE_DRIVER().
This however brings ordering problems and lack of probe deferral,
therefore clkout driver should be converted to a regular module and
instantiated as a child of PMU driver to be able to use existing
compatibles and address space.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20201001165646.32279-2-krzk@kernel.org
RPMH and drivers that use RPMH APIs need Command DB API to find the
dynamic resource information. Let's match the RPMH to match the Command
DB configuration.
This should fix undefined symbol references reported by CI :
aarch64-linux-ld: drivers/clk/qcom/clk-rpmh.o: in function `clk_rpmh_probe':
>> clk-rpmh.c:(.text+0xac): undefined reference to `cmd_db_read_addr'
>> aarch64-linux-ld: clk-rpmh.c:(.text+0xc0): undefined reference to `cmd_db_read_aux_data'
aarch64-linux-ld: drivers/soc/qcom/rpmh-rsc.o: in function `rpmh_rsc_probe':
>> rpmh-rsc.c:(.text+0x42c): undefined reference to `cmd_db_ready'
aarch64-linux-ld: drivers/regulator/qcom-rpmh-regulator.o: in function `rpmh_regulator_probe':
>> qcom-rpmh-regulator.c:(.text+0x3e0): undefined reference to `cmd_db_read_addr'
Cc: Todd Kjos <tkjos@google.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Link: https://lore.kernel.org/r/20201008040907.7036-1-ilina@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch enables Command DB driver to be loaded as a module. Command
DB is inherent to RPMH interaction and as such would never be unloaded.
Add supress_bind_attrs to make it a permanently loaded module.
Reviewed-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Link: https://lore.kernel.org/r/20201001154144.5226-1-ilina@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The MX driver only supports 32-bit ARM SoCs and the GX driver only
supports 64-bit SoCs. Only build for the right architecture.
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The functions geni_se_select_fifo_mode() and
geni_se_select_fifo_mode() are a little funny. They read/write a
bunch of memory mapped registers even if they don't change or aren't
relevant for the current protocol. Let's make them a little more
sane. We'll also add a comment explaining why we don't do some of the
operations for UART.
NOTE: there is no evidence at all that this makes any performance
difference and it fixes no bugs. However, it seems (to me) like it
makes the functions a little easier to understand. Decreasing the
amount of times we read/write memory mapped registers is also nice,
even if we are using "relaxed" variants.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20201013142448.v2.3.I646736d3969dc47de8daceb379c6ba85993de9f4@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
On geni-i2c transfers using DMA, it was seen that if you program the
command (I2C_READ) before calling geni_se_rx_dma_prep() that it could
cause interrupts to fire. If we get unlucky, these interrupts can
just keep firing (and not be handled) blocking further progress and
hanging the system.
In commit 02b9aec592 ("i2c: i2c-qcom-geni: Fix DMA transfer race")
we avoided that by making sure we didn't program the command until
after geni_se_rx_dma_prep() was called. While that avoided the
problems, it also turns out to be invalid. At least in the TX case we
started seeing sporadic corrupted transfers. This is easily seen by
adding an msleep() between the DMA prep and the writing of the
command, which makes the problem worse. That means we need to revert
that commit and find another way to fix the bogus IRQs.
Specifically, after reverting commit 02b9aec592 ("i2c:
i2c-qcom-geni: Fix DMA transfer race"), I put some traces in. I found
that the when the interrupts were firing like crazy:
- "m_stat" had bits for M_RX_IRQ_EN, M_RX_FIFO_WATERMARK_EN set.
- "dma" was set.
Further debugging showed that I could make the problem happen more
reliably by adding an "msleep(1)" any time after geni_se_setup_m_cmd()
ran up until geni_se_rx_dma_prep() programmed the length.
A rather simple fix is to change geni_se_select_dma_mode() so it's a
true inverse of geni_se_select_fifo_mode() and disables all the FIFO
related interrupts. Now the problematic interrupts can't fire and we
can program things in the correct order without worrying.
As part of this, let's also change the writel_relaxed() in the prepare
function to a writel() so that our DMA is guaranteed to be prepared
now that we can't rely on geni_se_setup_m_cmd()'s writel().
NOTE: the only current user of GENI_SE_DMA in mainline is i2c.
Fixes: 37692de5d5 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Fixes: 02b9aec592 ("i2c: i2c-qcom-geni: Fix DMA transfer race")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201013142448.v2.1.Ifdb1b69fa3367b81118e16e9e4e63299980ca798@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
MSM8916 has two RPM power domains: VDDCX and VDDMX.
Add the necessary definitions to manage them with rpmpd.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200916104135.25085-4-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the shared modemcx/cx/mx power-domains found on MSM8939.
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Link: https://lore.kernel.org/r/20200930100145.9457-3-jun.nie@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Older SoCs like MSM8916, MSM8939, MSM8974, MSM8996, ...
use "voltage corners" instead of "voltage levels".
It seems like they all use exactly the same set of corner values,
a value from 0-6 where 6 is the maximum corner (super turbo).
In preparation to add the power domains for MSM8916, rename
MAX_8996_RPMPD_STATE to MAX_CORNER_RPMPD_STATE to make it clear
that this is the max_state to be used for all SoCs using corners. -
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200916104135.25085-2-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the shared cx/mx and sensor sub-system's cx and mx
power-domains found on SDM660.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20201018122620.9735-1-kholk11@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch allow the rpmh driver to be loaded as a permenent
module. Meaning it can be loaded from a module, but then cannot
be unloaded.
Ideally, it would include a remove hook and related logic, but
the rpmh driver is fairly core to the system, so once its loaded
with almost anything else to get the system to go, the dependencies
are not likely to ever also be removed.
So making it a permanent module at least improves things slightly
over requiring it to be a built in driver.
Cc: Todd Kjos <tkjos@google.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[mkshah: Fix typos in commit message, send after removing _rcuidle trace]
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1601877596-32676-3-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Commit efde2659b0 ("drivers: qcom: rpmh-rsc: Use rcuidle tracepoints
for rpmh") was written to fix a bug seen in an unmerged series that
implemented a struct generic_pm_domain::power_off() callback calling
rpmh_flush(). See stack trace below.
Call trace:
dump_backtrace+0x0/0x174
show_stack+0x20/0x2c
dump_stack+0xc8/0x124
lockdep_rcu_suspicious+0xe4/0x104
__tcs_buffer_write+0x230/0x2d0
rpmh_rsc_write_ctrl_data+0x210/0x270
rpmh_flush+0x84/0x24c
rpmh_domain_power_off+0x78/0x98
_genpd_power_off+0x40/0xc0
genpd_power_off+0x168/0x208
Later the final merged solution is to use CPU PM notification to invoke
rpmh_flush() and power_off() callback of genpd is not implemented in the
driver.
CPU PM notifiers are run with RCU enabled/watching (see cpu_pm_notify()
and how it calls rcu_irq_enter_irqson() before calling the notifiers).
Remove this change since RCU will not be idle during CPU PM notifications
hence not required to use _rcuidle tracepoint. Using _rcuidle tracepoint
prevented rpmh driver to be loadable module as these are not exported
symbols.
This reverts commit efde2659b0.
Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1601877596-32676-2-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Older chipsets may not be allowed to configure certain LLCC registers
as that is handled by the secure side software. However, this is not
the case for newer chipsets and they must configure these registers
according to the contents of the SCT table, while keeping in mind that
older targets may not have these capabilities. So add support to allow
such configuration of registers to enable capacity based allocation
and power collapse retention for capable chipsets.
Reason for choosing capacity based allocation rather than the default
way based allocation is because capacity based allocation allows more
finer grain partition and provides more flexibility in configuration.
As for the retention through power collapse, it has an advantage where
the cache hits are more when we wake up from power collapse although
it does burn more power but the exact power numbers are not known at
the moment.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[saiprakash.ranjan@codeaurora.org: use existing config and reword commit msg]
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/dac7e11cf654fc6d75a6b5ca062ab87b01547810.1600151951.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cleanup qcom_llcc_cfg_program() by moving llcc configuration
to a separate function of its own. Also correct misspelled
'instance' caught by checkpatch.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/51f9ad67333eedf326212dd1b040aade6978e5b1.1600151951.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
smp2p_update_bits() should disable interrupts when it acquires its
spinlock. This is important because without the _irqsave, a priority
inversion can occur.
This function is called both with interrupts enabled in
qcom_q6v5_request_stop(), and with interrupts disabled in
ipa_smp2p_panic_notifier(). IRQ handling of spinlocks should be
consistent to avoid the panic notifier deadlocking because it's
sitting on the thread that's already got the lock via _request_stop().
Found via lockdep.
Cc: stable@vger.kernel.org
Fixes: 50e9964141 ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20200929133040.RESEND.1.Ideabf6dcdfc577cf39ce3d95b0e4aa1ac8b38f0c@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In the error case, where a power domain cannot be powered on
successfully at boot time (in mtk_register_power_domains),
pm_genpd_init would still be called with is_off=false, and the
system would later try to disable the power domain again, triggering
warnings as disabled clocks are disabled again (and other potential
issues).
Also print a warning splat in that case, as this should never
happen.
Fixes: c84e358718 ("soc: Mediatek: Add SCPSYS power domain driver")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Link: https://lore.kernel.org/r/20200928113107.v2.1.I5e6f8c262031d0451fe7241b744f4f3111c1ce71@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This code needs to call iounmap() on one error path.
Fixes: 2173fc7cb6 ("ARM: shmobile: R-Mobile: Add DT support for PM domains")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200923113142.GC1473821@mwanda
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Various driver updates for platforms. A bulk of this is smaller fixes or
cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs
and platforms.
-----BEGIN PGP SIGNATURE-----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=tfPb
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms. A bulk of this is smaller fixes
or cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs and
platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
drm/mediatek: reduce clear event
soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
soc: mediatek: cmdq: add jump function
soc: mediatek: cmdq: add write_s_mask value function
soc: mediatek: cmdq: add write_s value function
soc: mediatek: cmdq: add read_s function
soc: mediatek: cmdq: add write_s_mask function
soc: mediatek: cmdq: add write_s function
soc: mediatek: cmdq: add address shift in jump
soc: mediatek: mtk-infracfg: Fix kerneldoc
soc: amlogic: pm-domains: use always-on flag
reset: sti: reset-syscfg: fix struct description warnings
reset: imx7: add the cm4 reset for i.MX8MQ
dt-bindings: reset: imx8mq: add m4 reset
reset: Fix and extend kerneldoc
reset: reset-zynqmp: Added support for Versal platform
dt-bindings: reset: Updated binding for Versal reset driver
reset: imx7: Support module build
soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
soc: fsl: qman: convert to use be32_add_cpu()
...
SoC changes, a substantial part of this is cleanup of some of the older
platforms that used to have a bunch of board files. In particular:
- Removal of non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP platforms,
moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
THere are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones re:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP
-----BEGIN PGP SIGNATURE-----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=0+Ee
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
I had queued up a batch of fixes that got a bit close to the release for
sending in before the merge window opened, so I'm including them in the
batch of pull requests instead. They're mostly smaller DT tweaks and
fixes, the usual mix that we tend to have through the releases.
-----BEGIN PGP SIGNATURE-----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=tvbv
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"I had queued up a batch of fixes that got a bit close to the release
for sending in before the merge window opened, so I'm including them
in the merge window batch instead.
Mostly smaller DT tweaks and fixes, the usual mix that we tend to have
through the releases"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: iwg20d-q7-common: Fix touch controller probe failure
ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails
ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2
soc: actions: include header to fix missing prototype
arm64: dts: ti: k3-j721e: Rename mux header and update macro names
soc: qcom: pdr: Fixup array type of get_domain_list_resp message
arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells
arm64: dts: qcom: kitakami: Temporarily disable SDHCI1
arm64: dts: sdm630: Temporarily disable SMMUs by default
arm64: dts: sdm845: Fixup OPP table for all qup devices
arm64: dts: allwinner: h5: remove Mali GPU PMU module
ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator
soc: xilinx: Fix error code in zynqmp_pm_probe()
The avs drivers are all SoC specific drivers that doesn't share any code.
Instead they are located in a directory, mostly to keep similar
functionality together. From a maintenance point of view, it makes better
sense to collect SoC specific drivers like these, into the SoC specific
directories.
Therefore, let's move the qcom-cpr driver to the qcom directory.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Niklas Cassel <nks@flawful.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The avs drivers are all SoC specific drivers that doesn't share any code.
Instead they are located in a directory, mostly to keep similar
functionality together. From a maintenance point of view, it makes better
sense to collect SoC specific drivers like these, into the SoC specific
directories.
Therefore, let's move the smartreflex driver for OMAP to the ti directory.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The avs drivers are all SoC specific drivers that doesn't share any code.
Instead they are located in a directory, mostly to keep similar
functionality together. From a maintenance point of view, it makes better
sense to collect SoC specific drivers like these, into the SoC specific
directories.
Therefore, let's move the rockchip-io driver to the rockchip directory.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Rework cpufreq statistics collection to allow it to take place
when fast frequency switching is enabled in the governor (Viresh
Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core
code to support driver-specific devfreq DT bindings (Leonard
Crestez, Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection
statistics and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC
mode (Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow
domain power off transition to be aborted in the absence of the
"power off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they
are power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) driverrs (Kevin Hilman).
-----BEGIN PGP SIGNATURE-----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=rGhy
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the collection of cpufreq statistics to allow it to take
place if fast frequency switching is enabled in the governor, rework
the frequency invariance handling in the cpufreq core and drivers, add
new hardware support to a couple of cpufreq drivers, fix a number of
assorted issues and clean up the code all over.
Specifics:
- Rework cpufreq statistics collection to allow it to take place when
fast frequency switching is enabled in the governor (Viresh Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core code
to support driver-specific devfreq DT bindings (Leonard Crestez,
Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection statistics
and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC mode
(Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow domain
power off transition to be aborted in the absence of the "power
off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they are
power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) drivers (Kevin Hilman)"
* tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
cpufreq: stats: Fix string format specifier mismatch
arm: disable frequency invariance for CONFIG_BL_SWITCHER
cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
cpufreq: stats: Add memory barrier to store_reset()
cpufreq: schedutil: Simplify sugov_fast_switch()
ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe()
ACPI: EC: PM: Flush EC work unconditionally after wakeup
PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI
PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
cpufreq: Move traces and update to policy->cur to cpufreq core
cpufreq: stats: Enable stats for fast-switch as well
cpufreq: stats: Mark few conditionals with unlikely()
cpufreq: stats: Remove locking
cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
PM: domains: Allow to abort power off when no ->power_off() callback
PM: domains: Rename power state enums for genpd
PM / devfreq: tegra30: Improve initial hardware resetting
PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
PM / devfreq: Add devfreq_get_devfreq_by_node function
...
The Tegra PMC driver does ungodly things with the interrupt hierarchy,
repeatedly corrupting it by pulling hwirq numbers out of thin air,
overriding existing IRQ mappings and changing the handling flow
of unsuspecting users.
All of this is done in the name of preserving the interrupt hierarchy
even when these levels do not exist in the HW. Together with the use
of proper IRQs for IPIs, this leads to an unbootable system as the
rescheduling IPI gets repeatedly repurposed for random drivers...
Instead, let's simply mark the level from which the hierarchy does
not make sense for the HW, and let the core code trim the usused
levels from the hierarchy.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Pull opertaing performance points (OPP) framework fixes for 5.10-rc1
from Viresh Kumar:
"- Return -EPROBE_DEFER properly from dev_pm_opp_get_opp_table()
(Stephan Gerhold).
- Minor cleanups around required-opps (Stephan Gerhold).
- Extends opp-supported-hw property to contain multiple versions
(Viresh Kumar).
- Multiple cleanups around dev_pm_opp_attach_genpd() (Viresh Kumar).
- Multiple fixes, cleanups in the OPP core for overall better design
(Viresh Kumar)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Allow opp-level to be set to 0
opp: Prevent memory leak in dev_pm_opp_attach_genpd()
ARM: tegra: Pass multiple versions in opp-supported-hw property
opp: Allow opp-supported-hw to contain multiple versions
dt-bindings: opp: Allow opp-supported-hw to contain multiple versions
opp: Set required OPPs in reverse order when scaling down
opp: Reduce code duplication in _set_required_opps()
opp: Drop unnecessary check from dev_pm_opp_attach_genpd()
opp: Handle multiple calls for same OPP table in _of_add_opp_table_v1()
opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER
opp: Remove _dev_pm_opp_find_and_remove_table() wrapper
opp: Split out _opp_set_rate_zero()
opp: Reuse the enabled flag in !target_freq path
opp: Rename regulator_enabled and use it as status of all resources
- add new functionality for writing and reading values to and from addresses
-----BEGIN PGP SIGNATURE-----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=VQGK
-----END PGP SIGNATURE-----
Merge tag 'v5.9-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
cmdq helper:
- add new functionality for writing and reading values to and from addresses
* tag 'v5.9-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
drm/mediatek: reduce clear event
soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
soc: mediatek: cmdq: add jump function
soc: mediatek: cmdq: add write_s_mask value function
soc: mediatek: cmdq: add write_s value function
soc: mediatek: cmdq: add read_s function
soc: mediatek: cmdq: add write_s_mask function
soc: mediatek: cmdq: add write_s function
soc: mediatek: cmdq: add address shift in jump
soc: mediatek: mtk-infracfg: Fix kerneldoc
Link: https://lore.kernel.org/r/ac672cc9-059c-b768-3a67-1f674d4a2b7a@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Replace the busy wait for free tcs slots in the RPMh driver with a
sleeping wait and use memory barriers when writing the command registers.
Add a bunch of SoC ids to the socinfo driver, fix an erro printin the
apr driver and migrate llcc to devm_platform_ioremap_resource_byname().
-----BEGIN PGP SIGNATURE-----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=GI6C
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.10
Replace the busy wait for free tcs slots in the RPMh driver with a
sleeping wait and use memory barriers when writing the command registers.
Add a bunch of SoC ids to the socinfo driver, fix an erro printin the
apr driver and migrate llcc to devm_platform_ioremap_resource_byname().
* tag 'qcom-drivers-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: llcc: use devm_platform_ioremap_resource_byname()
soc: qcom: apr: Fixup the error displayed on lookup failure
soc: qcom: socinfo: Add msm8992/4 and apq8094 SoC IDs
soc: qcom: rpmh-rsc: Sleep waiting for tcs slots to be free
soc: qcom-geni-se: Don't use relaxed writes when writing commands
soc: qcom: socinfo: add SC7180 entry to soc_id array
soc: qcom: socinfo: add soc id for IPQ6018
Link: https://lore.kernel.org/r/20200924040504.179708-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Use dev_err_probe() to simplify error handling for i.MX GPCv2 driver.
- Add a check in i.MX SCU power domain driver to ignore the power
domains that are not owned by the current partition.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl9qjugUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7xwgf+K/yRr+pk2kbfYal+mAVozVPP2vXH
fx4e+voMfHW4g25BrFQM4pV882w58Hh69duB+qoVtPjUZtpTes812gmDJf8N1H7r
fk/ZQQdrq3pDDe2XEKP/RperIBvzhbRPIu1per4gsLzoBx5Jm71Q0i0bEt/7mPSM
rZuS1qAZWPFBKtVRR3+iKrkM8HWLERacpjuXTIEFyav988BjxY27GPwwpG7WFv1v
aaO+nVno7xKo24hCVmY+GUrbTxNkYIKH9415iCf38EQx5gKOvKwvp/Jn061p9Vqb
8+0UNMyA+5YWs8fyOIUhWD0qOkWcGUlJCun7vB/3NDFzvgTnAGyyJCEK7g==
=tfwW
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.10:
- Use dev_err_probe() to simplify error handling for i.MX GPCv2 driver.
- Add a check in i.MX SCU power domain driver to ignore the power
domains that are not owned by the current partition.
* tag 'imx-drivers-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: scu-pd: ignore power domain not owned
soc: imx: gpcv2: Use dev_err_probe() to simplify error handling
Link: https://lore.kernel.org/r/20200923073009.23678-1-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Consist of:
- Add Ring accelerator support for AM65x
- Add TI PRUSS platform driver and enable it on available platforms
- Extend PRUSS driver for CORECLK_MUX/IEPCLK_MUX support
- UDMA rx ring pair fix
- Add socinfo entry for J7200
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=s8sI
-----END PGP SIGNATURE-----
Merge tag 'drivers_soc_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers
ARM: soc: TI driver updates for v5.10
Consist of:
- Add Ring accelerator support for AM65x
- Add TI PRUSS platform driver and enable it on available platforms
- Extend PRUSS driver for CORECLK_MUX/IEPCLK_MUX support
- UDMA rx ring pair fix
- Add socinfo entry for J7200
* tag 'drivers_soc_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
Add missing '#' to fix schema errors:
soc: ti: Convert to DEFINE_SHOW_ATTRIBUTE
dmaengine: ti: k3-udma-glue: Fix parameters for rx ring pair request
soc: ti: k3-socinfo: Add entry for J7200
soc: ti: pruss: support CORECLK_MUX and IEPCLK_MUX
dt-bindings: soc: ti: Update TI PRUSS bindings regarding clock-muxes
firmware: ti_sci: allow frequency change for disabled clocks by default
soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one
soc: ti: pruss: Enable support for ICSSG subsystems on K3 J721E SoCs
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM65x SoCs
soc: ti: pruss: Add support for PRU-ICSS subsystems on 66AK2G SoC
soc: ti: pruss: Add support for PRU-ICSS subsystems on AM57xx SoCs
soc: ti: pruss: Add support for PRU-ICSSs on AM437x SoCs
soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs
dt-bindings: soc: ti: Add TI PRUSS bindings
bindings: soc: ti: soc: ringacc: remove ti,dma-ring-reset-quirk
soc: ti: k3: ringacc: add am65x sr2.0 support
Link: https://lore.kernel.org/r/1600656828-29267-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Clear unneeded L2C-310 flag which presenc was triggering warning
message.
2. Fix build of SAMSUNG_PM_DEBUG without MMU.
3. Minor cleanups and update of linux-samsung-soc mailing list in
Maintainers.
-----BEGIN PGP SIGNATURE-----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=Bkfy
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc
Samsung mach/soc changes for v5.10
1. Clear unneeded L2C-310 flag which presenc was triggering warning
message.
2. Fix build of SAMSUNG_PM_DEBUG without MMU.
3. Minor cleanups and update of linux-samsung-soc mailing list in
Maintainers.
* tag 'samsung-soc-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: exynos: clear L310_AUX_CTRL_NS_LOCKDOWN in default l2c_aux_val
Signed-off-by: Olof Johansson <olof@lixom.net>
These changes contain a bit of cleanup and chip support for the upcoming
Tegra234 SoC.
-----BEGIN PGP SIGNATURE-----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=kg9i
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.10-rc1
These changes contain a bit of cleanup and chip support for the upcoming
Tegra234 SoC.
* tag 'tegra-for-5.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Add Tegra234 support
soc/tegra: pmc: Reorder reset sources/levels definitions
soc/tegra: misc: Add Tegra234 support
soc/tegra: fuse: Add Tegra234 support
soc/tegra: fuse: Implement tegra_is_silicon()
soc/tegra: fuse: Extract tegra_get_platform()
Link: https://lore.kernel.org/r/20200918150303.3938852-2-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add core support for the R-Car V3U (R8A779A0) SoC, including System
Controller (SYSC) and Reset (RST) support,
- Various Kconfig cleanups.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX2ShfwAKCRCKwlD9ZEnx
cO6bAP4kuetjBmf+BxLGRxZTEin+8YQRd7p051UZKBMa4qp2lwD+JKhnasH1qv64
CWS3LV8FNumj2Gr1e3YdJcgwb+9p3gc=
=K/tj
-----END PGP SIGNATURE-----
Merge tag 'renesas-drivers-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.10 (take two)
- Add core support for the R-Car V3U (R8A779A0) SoC, including System
Controller (SYSC) and Reset (RST) support,
- Various Kconfig cleanups.
* tag 'renesas-drivers-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: r8a779a0-sysc: Add r8a779a0 support
soc: renesas: rcar-rst: Add support for R-Car V3U
soc: renesas: Identify R-Car V3U
soc: renesas: Sort driver description title
soc: renesas: Use ARM32/ARM64 for menu description
dt-bindings: clock: Add r8a779a0 CPG Core Clock Definitions
dt-bindings: power: Add r8a779a0 SYSC power domain definitions
Link: https://lore.kernel.org/r/20200918124800.15555-4-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix the missing prototype warning in owl-sps-helper driver by
including owl-sps header
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAl9p3t4ACgkQVZ8R5v6R
zvWX3wf9GXCOpjT9duwdBqS1dqf69bYXlG+Hzxpc8Zd5Sc5gkhuKQyoK9bXIAs1j
fbxpRNyJd2+5RtcOvJfA5LOqEE1jrBhHqOQcir28qyR8ZUGrlCzd1933RM+1jJPV
9OFLxs6xENz4uSq4WkJpSIFDiiNfYdyuiDnQrhe1+0VGf8CcXLu1YAA1JZVFKOJF
gandXfwglPK18Ta0uMBJhstFkM7SGUN9n5vbMmOcnl/AzEt2CeBRtj22et+UlppH
YdbmugkXNM3GxTi5Imnoli7IY6dcJ8fJDfqOtaxQLusGnsi9J4/XLlpRuv3j7S/3
+k+FOsZyghsi+i5j34/wzEWCloq3mw==
=YB0/
-----END PGP SIGNATURE-----
Merge tag 'actions-drivers-fixes-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/fixes
Actions Semi drivers fixes for v5.9
- Fix the missing prototype warning in owl-sps-helper driver by
including owl-sps header
* tag 'actions-drivers-fixes-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
soc: actions: include header to fix missing prototype
Link: https://lore.kernel.org/r/20200922114559.GD11251@Mani-XPS-13-9360
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix the array type of the domain_list QMI response in PDR.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl9pOLsbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3F3DwP/iiHTvcSVTmpCz4Kk87e
VgvhsIp/c9tGW5Spgdb9dTI469fznkbR/MhV8VHyz2boJRAZSqXzi5wCUP0Y1nwt
4aoUk0eL9aecH88trkHcsKQYbgLcoKUkqftFMGe4DNX6ja34BKbg52SZ/xupVFp/
aFk1iFk0Wm0cbh7r4X27vT3yIHcf2ic6VxuTEsDWnbohP3AmXamUq2iRduZwhVNB
JEhju3hb+LqrZiSdYLu85/LSH/Obo1310dNo8TjNn29GE7DZTqtsm9hBl+79IxuW
B9CCCbmo+jVQ/w+6s+b/T9J6aqcw+fEHD5KmOt3/QqGE3BgytuIq9I3u1rEdu139
akK8xGzOQDT3Bkau3rgYDWUzY+BhnF8akvIQEhtkoBMW75yoTxuxFFQykDTtxQhO
1XBD8hAIvfure8I6MmlvIehtuN19eS93gXsf15k+17umhr6lSYvogpFLHDSdhMx2
jx7o9+xQxFST/f/HAxCQqIB0WW57HEMCL5rvMJXbJnkOzWcppUExbHRlaMOmG1fp
N8llrXoChfYHSM0ijh4DhWA3Pq14ZKUM/7efRxUjPJ5iSq4mYTVfZ4TsozyIpect
R0+zNZU27l9tzAJ7cfp87ajzEFj7IC8aeHZqt4yeSgLAMugUxiB8w/XguYBLWjiX
sJ3AFwoKWBiKTGHk08xeufsK
=RBzc
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-5.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v5.9
Fix the array type of the domain_list QMI response in PDR.
* tag 'qcom-drivers-fixes-for-5.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pdr: Fixup array type of get_domain_list_resp message
Link: https://lore.kernel.org/r/20200921235241.36463-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
This set of changes fixes some minor issues in existing device trees and
adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled
to allow them to be detected by software.
It also adds support for the Tegra234 VDK board, which is a pre-silicon
platform for the upcoming Orin SoC.
-----BEGIN PGP SIGNATURE-----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=zeT7
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Changes for v5.10-rc1
This set of changes fixes some minor issues in existing device trees and
adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled
to allow them to be detected by software.
It also adds support for the Tegra234 VDK board, which is a pre-silicon
platform for the upcoming Orin SoC.
* tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Initial Tegra234 VDK support
arm64: tegra: Populate EEPROMs for Jetson Xavier NX
arm64: tegra: Add label properties for EEPROMs
arm64: tegra: Add DT binding for AHUB components
arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano
arm64: tegra: Properly size register regions for GPU on Tegra194
arm64: tegra: Use valid PWM period for VDD_GPU on Tegra210
arm64: tegra: Describe display controller outputs for Tegra210
arm64: tegra: Disable SD card write-protection on Jetson Nano
arm64: tegra: Add VBUS supply for micro USB port on Jetson Nano
arm64: tegra: Wire up pinctrl states for all DPAUX controllers
arm64: tegra: Add ID EEPROMs on Jetson AGX Xavier
Link: https://lore.kernel.org/r/20200918150303.3938852-5-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Add clear parameter to let client decide if
event should be clear to 0 after GCE receive it.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/1594136714-11650-9-git-send-email-dennis-yc.hsieh@mediatek.com
[mb: fix commit message]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
add write_s_mask function in cmdq helper functions which
writes value contains in internal register to address
with mask and large dma access support.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Link: https://lore.kernel.org/r/1594136714-11650-4-git-send-email-dennis-yc.hsieh@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Fix W=1 compile warnings (invalid kerneldoc):
drivers/soc/mediatek/mtk-infracfg.c:34: warning: Function parameter or member 'infracfg' not described in 'mtk_infracfg_set_bus_protection'
drivers/soc/mediatek/mtk-infracfg.c:34: warning: Excess function parameter 'regmap' description in 'mtk_infracfg_set_bus_protection'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200729074415.28393-1-krzk@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The ast2600 disables the mapping of AHB memory regions by default,
only allowing the LPC window to point to SPI NOR. In order to point the
window to any AHB address, an ast2600 specific bit must be toggled.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20200312121413.294384-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Alignment is a hardware constraint of the LPC2AHB bridge, and misaligned
reserved memory will present as corrupted data.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20191016233950.10100-1-andrew@aj.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Rather than use a governor to keep these domains always-on, instead
use the flag GENPD_FLAG_ALWAYS_ON. This has the same effect, but with
much lower overhead since the governor path is not used at all.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200921222135.7145-1-khilman@baylibre.com
Fix smatch warning:
drivers/soc/fsl/qe/ucc.c:526
ucc_set_tdm_rxtx_clk() warn: unsigned 'tdm_num' is never less than zero.
'tdm_num' is u32 type, never less than zero.
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
This addresses the following gcc warning with "make W=1":
drivers/soc/fsl/dpio/qbman-portal.c: In function
‘qbman_swp_enqueue_multiple_direct’:
drivers/soc/fsl/dpio/qbman-portal.c:650:11: warning: variable
‘addr_cena’ set but not used [-Wunused-but-set-variable]
650 | uint64_t addr_cena;
| ^~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
On error the function was meant to return -ERRNO. This also fixes
compile warning:
drivers/soc/fsl/qbman/bman.c:640:6: warning: variable 'err' set but not used [-Wunused-but-set-variable]
Fixes: 0505d00c8d ("soc/fsl/qbman: Cleanup buffer pools if BMan was initialized prior to bootup")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Include the header with prototype of owl_sps_set_pg to fix:
drivers/soc/actions/owl-sps-helper.c:16:5: warning: no previous prototype for 'owl_sps_set_pg' [-Wmissing-prototypes]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reword the kconfig text to be consistent and reflect that most drivers
are available for all supported ASPEED chips (2400, 2500 and 2600).
Rearrange the symbols the SoC drivers depend on so the menu doesn't
appear unless you are building for ASPEED for compile testing.
The SYSCON_MFD and REGMAP options are usually selected by drivers that
need them, so do this.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20200916125731.784527-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The Power Controller in the Amlogic AXG SoCs is similar to the GXL one
but with less VPU memory domains to enable and a supplementary Audio
memory power domain.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200917064702.1459-3-narmstrong@baylibre.com
The NVIDIA Tegra234 VDK is a simulation platform for the Orin SoC. It
supports a subset of the peripherals that will be available in the final
chip and serves as a bootstrapping platform.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The PMC block is largely similar to that found on earlier chips, but
not completely compatible. Allow binding to the instantiation found on
Tegra234.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move the definitions of reset sources and levels into a more natural
location.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The MISC block is largely similar to that found on earlier chips, but
not completely compatible. Allow binding to the instantiation found on
Tegra234.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support for FUSE block found on the Tegra234 SoC, which is largely
similar to the IP found on previous generations.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This function can be used by drivers to determine whether code is
running on silicon or on a simulation platform.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This function extracts the PRE_SI_PLATFORM field from the HIDREV
register and can be used to determine which platform the kernel runs on
(silicon, simulation, ...). Note that while only Tegra194 and later
define this field, it should be safe to call this on prior generations
as well since this field should read as 0, indicating silicon.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support for R-Car V3U (R8A779A0) SoC power areas and register
access, because register specification differs from R-Car Gen2/3.
Inspired by patches in the BSP by Tho Vu.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1599810232-29035-5-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
APR client incorrectly prints out "ret" variable on pdr_add_lookup failure,
it should be printing the error value returned by the lookup instead.
Fixes: 8347356626 ("soc: qcom: apr: Add avs/audio tracking functionality")
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200915154232.27523-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The array type of get_domain_list_resp is incorrectly marked as NO_ARRAY.
Due to which the following error was observed when using pdr helpers with
the downstream proprietary pd-mapper. Fix this up by marking it as
VAR_LEN_ARRAY instead.
Err logs:
qmi_decode_struct_elem: Fault in decoding: dl(2), db(27), tl(160), i(1), el(1)
failed to decode incoming message
PDR: tms/servreg get domain list txn wait failed: -14
PDR: service lookup for tms/servreg failed: -14
Tested-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Fixes: fbe639b44a ("soc: qcom: Introduce Protection Domain Restart helpers")
Reported-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200914145807.1224-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
please pull the following:
- Alvaro adds support for the BCM63xx (DSL) SoCs power domain controller
and adds support for the 6318, 6328, 6362, 63268.
- Florian adds support for tuning the Bus Interface Unit on 72164 and
72165, enables the Brahma-B53 and Cortex-A72 read-ahead cache for the
64-bit capable ARCH_BRCMSTB platforms, and finally updates the GISB
driver to support breakpoint notifications.
-----BEGIN PGP SIGNATURE-----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=njcZ
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.10/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom SoCs drivers changes for 5.10,
please pull the following:
- Alvaro adds support for the BCM63xx (DSL) SoCs power domain controller
and adds support for the 6318, 6328, 6362, 63268.
- Florian adds support for tuning the Bus Interface Unit on 72164 and
72165, enables the Brahma-B53 and Cortex-A72 read-ahead cache for the
64-bit capable ARCH_BRCMSTB platforms, and finally updates the GISB
driver to support breakpoint notifications.
* tag 'arm-soc/for-5.10/drivers' of https://github.com/Broadcom/stblinux:
bus: brcmstb_gisb: Add support for breakpoint interrupts
dt-bindings: bus: Document breakpoint interrupt for gisb-arb
soc: bcm: brcmstb: biuctrl: Change RAC data line prefetching after 4 consecutive lines
soc: bcm: brcmstb: biuctrl: Change RAC prefetch distance from +/-1 to +/- 2
soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72165
soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72164
MIPS: BMIPS: dts: add BCM63268 power domain support
MIPS: BMIPS: dts: add BCM6362 power domain support
MIPS: BMIPS: dts: add BCM6328 power domain support
soc: bcm: add BCM63xx power domain driver
MIPS: BMIPS: add BCM6318 power domain definitions
MIPS: BMIPS: add BCM63268 power domain definitions
MIPS: BMIPS: add BCM6362 power domain definitions
MIPS: BMIPS: add BCM6328 power domain definitions
dt-bindings: soc: brcm: add BCM63xx power domain binding
soc: bcm: brcmstb: biuctrl: Enable Read-ahead cache
bus: brcmstb_gisb: Shorten prints
Link: https://lore.kernel.org/r/20200912032153.1216354-3-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
We now drop legacy platform data for RTC on am3, am4 and dra7.
And we add initial genpd support for PRM (Power and Reset Manager)
and use it to drop legacy platform data for am3 sgx and omap4/5
l4_abe interconnect instance.
-----BEGIN PGP SIGNATURE-----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=w5Zl
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.10/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
Add initial genpd support for omaps to drop more platform data
We now drop legacy platform data for RTC on am3, am4 and dra7.
And we add initial genpd support for PRM (Power and Reset Manager)
and use it to drop legacy platform data for am3 sgx and omap4/5
l4_abe interconnect instance.
* tag 'omap-for-v5.10/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Drop legacy platform data for dra7 rtcss
ARM: OMAP2+: Drop legacy platform data for am3 and am4 rtc
soc: ti: pm33xx: Simplify RTC usage to prepare to drop platform data
ARM: dts: Configure omap4 and 5 l4_abe for genpd and drop platform data
ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data
soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domain
soc: ti: omap-prm: Configure sgx power domain for am3 and am4
soc: ti: omap-prm: Add basic power domain support
dt-bindings: omap: Update PRM binding for genpd
Link: https://lore.kernel.org/r/pull-1599132307-761202@atomide.com-2
Signed-off-by: Olof Johansson <olof@lixom.net>
- Drop a static qualifier in integrator_soc_init()
- Remove Integrator and Versatile from PHYS_OFFSET
-----BEGIN PGP SIGNATURE-----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=xtzo
-----END PGP SIGNATURE-----
Merge tag 'versatile-soc-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/soc
Versatile SoC updates for the v5.10 kernel cycle:
- Drop a static qualifier in integrator_soc_init()
- Remove Integrator and Versatile from PHYS_OFFSET
* tag 'versatile-soc-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: versatile: Remove Integrator and Realview from PHYS_OFFSET
soc: integrator: Drop pointless static qualifier in integrator_soc_init()
Link: https://lore.kernel.org/r/CACRpkdYYDSg8FAjJAqew5yEu7H1Y3E1rPN9TL25K31T=QWATuA@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it
also touches files shared with S5Pv210 and Exynos. This is mostly Arnd
Bergmann work which Krzysztof Kozlowski took over, rebased and polished.
The goal is to cleanup, merge and finally make the Samsung S3C24xx and
S3C64xx architectures multiplatform. The multiplatform did not happen
yet here - just cleaning up and merging into one arch/arm/mach-s3c
directory. However this is step forward for multiplatform or at least
to keep this code still maintainable.
This pulls also branch with changes for Samsung SoC sound drivers from
broonie/sound because the cleanups there were part of this series and
all further patches depend on them.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAl9NGucQHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD1zzWD/0T5JdPls++8JUK04hxkunMJO3Ye2ir/a2C
YAI2M6fbOludcPeGCRnPBZ3uTbeSOXFrV6UuSVi8EVKoAb0EV3G50XGQecmy/TVx
nq/c90gtnsODL0Kxjm0767WZl9clKaIE3+VNSyQXAhqJqXK8A1L8ovsUpQEj6fr4
vaNQi6lW7o0r98OEB14M0z59lSWjanUZ33/R22L3AsRihlJTH0Sye2+zVG85LfMD
5okekSHndt2/NCUxgLTZIkp/cD/pzmhMRZTl1zWvZPPFsbzpuB9wZt46b7vkEzuN
NgPElEB9AJgyh/28D064lER6TFhz3TcATZjmEIXX+3tYIaoA2lj60QiSejM2FyBk
U5a0DYAyzwNs4R1GSQxrKnQS1AXQ+yoDniPcyNaSmuZbxaodAs9Hjxg9KfJ2bfs5
DFfSUJhf1Uam8UYolMbXqSkhd2KQjXpkF0eLK7sGk3wanO+YEqVs777fHpwIPLmd
767PD0YN+EfDUwmXAJ5Jgv2kvOJIGul7BTgpWtbRHEaDvLHRQl5OhjsWsj9kWCFX
fx0Jz1sAUqi+gNq3XUFM88/VPEkTgejmVRULnBxqVsar5b/0BeRJEgA6Ljycv0Jv
2ux5zdMuX/+Xc4zdaJOWaL8NqRuT8nSynKXbWHTzJk4cF3p12/g3q3LOHBBLcLL6
AzTEA6iZ0w==
=bjMI
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc
Samsung S3C24xx and S3C64xx machine code cleanup for v5.10
Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it
also touches files shared with S5Pv210 and Exynos. This is mostly Arnd
Bergmann work which Krzysztof Kozlowski took over, rebased and polished.
The goal is to cleanup, merge and finally make the Samsung S3C24xx and
S3C64xx architectures multiplatform. The multiplatform did not happen
yet here - just cleaning up and merging into one arch/arm/mach-s3c
directory. However this is step forward for multiplatform or at least
to keep this code still maintainable.
This pulls also branch with changes for Samsung SoC sound drivers from
broonie/sound because the cleanups there were part of this series and
all further patches depend on them.
* tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits)
ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup
ARM: s3c: Cleanup from old plat-samsung include
ARM: s3c: make headers local if possible
ARM: s3c: move into a common directory
ARM: s3c24xx: stop including mach/hardware.h from mach/io.h
cpufreq: s3c24xx: move low-level clk reg access into platform code
cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh
ARM: s3c: remove cpufreq header dependencies
cpufreq: s3c24xx: split out registers
fbdev: s3c2410fb: remove mach header dependency
ARM: s3c24xx: bast: avoid irq_desc array usage
ARM: s3c24xx: spi: avoid hardcoding fiq number in driver
ARM: s3c24xx: include mach/irqs.h where needed
ARM: s3c24xx: move s3cmci pinctrl handling into board files
ARM: s3c24xx: move iis pinctrl config into boards
ARM: s3c24xx: move spi fiq handler into platform
ARM: s3c: adc: move header to linux/soc/samsung
ARM: s3c24xx: move irqchip driver back into platform
ARM: s3c24xx: move regs-spi.h into spi driver
ARM: s3c64xx: remove mach/hardware.h
...
Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
The IEPCLK_MUX is present on all SoCs whereas the CORECLK_MUX is present
only on AM65x SoCs and J721E. Add support for both these CLK muxes.
This allows the clock rates and clock parents for these to be controlled
through DT leveraging the clk infrastructure for configuring the default
parents and rates.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Current implementation of the genpd support over TI SCI uses a single
genpd across the whole SoC, and attaches multiple devices to this. This
solution has its drawbacks, like it is currently impossible to attach
more than one power domain to a device; the core genpd implementation
requires one genpd per power-domain entry in DT for a single device.
Also, some devices like USB apparently require their own genpd during
probe time, the current shared approach in use does not work at all.
Switch the implementation over to use a single genpd per power domain
entry in DT. The domains are registered with the onecell approach, but
we also add our own xlate service due to recent introduction of the
extended flag for TI SCI PM domains; genpd core xlate service requires
a single cell per powerdomain, but we are using two cells.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The K3 J721E family of SoCs have a revised version of the PRU-ICSS (ICSSG)
processor subsystem present on K3 AM65x SoCs. These SoCs contain typically
two ICSSG instances named ICSSG0 and ICSSG1. The two ICSSGs are identical
to each other for the most part with minor SoC integration differences and
capabilities. The ICSSG1 supports slightly enhanced features like SGMII
mode Ethernet, while the ICSSG0 instance is limited to MII mode only.
There is no change in the Interrupt Controller w.r.t AM65x. All other
integration aspects are very similar to the ICSSGs on AM65x SoCs.
The existing pruss platform driver has been updated to support these new
ICSSG instances through new J721E specific compatibles.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The K3 AM65x family of SoCs have the next generation of the PRU-ICSS
processor subsystem capable of supporting Gigabit Ethernet, and is
commonly referred to as ICSSG. These SoCs contain typically three
ICSSG instances named ICSSG0, ICSSG1 and ICSSG2. The three ICSSGs are
identical to each other for the most part with minor SoC integration
differences and capabilities. The ICSSG2 supports slightly enhanced
features like SGMII mode Ethernet, while the ICSS0 and ICSSG1 instances
are limited to MII mode only.
The ICSSGs on K3 AM65x SoCs are in general super-sets of the PRUSS on the
AM57xx/66AK2G SoCs. They include two additional auxiliary PRU cores called
RTUs and few other additional sub-modules. The interrupt integration is
also different on the K3 AM65x SoCs and are propagated through various
SoC-level Interrupt Router and Interrupt Aggregator blocks. Other IP level
differences include different constant tables, differences in system event
interrupt input sources etc. They also do not have a programmable module
reset line like those present on AM33xx/AM43xx SoCs. The modules are reset
just like any other IP with the SoC's global cold/warm resets.
The existing pruss platform driver has been updated to support these new
ICSSG instances through new AM65x specific compatibles. A build dependency
with ARCH_K3 is added to enable building all the existing PRUSS platform
drivers for this ARMv8 platform.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The 66AK2G SoC supports two PRU-ICSS instances, named PRUSS0 and PRUSS1,
each of which has two PRU processor cores. The two PRU-ICSS instances
are identical to each other with few minor SoC integration differences,
and are very similar to the PRU-ICSS1 of AM57xx/AM43xx. The Shared Data
RAM size is larger and the number of interrupts coming into MPU INTC
is like the instances on AM437x. There are also few other differences
attributing to integration in Keystone architecture (like no SYSCFG
register or PRCM handshake protocols). Other IP level differences
include different constant table, differences in system event interrupt
input sources etc. They also do not have a programmable module reset
line like those present on AM33xx/AM43xx SoCs. The modules are reset
just like any other IP with the SoC's global cold/warm resets.
The existing PRUSS platform driver has been enhanced to support these
66AK2G PRU-ICSS instances through new 66AK2G specific compatible for
properly probing and booting all the different PRU cores in each
PRU-ICSS processor subsystem. A build dependency with ARCH_KEYSTONE
is added to enable the driver to be built in K2G-only configuration.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The AM57xx family of SoCs supports two PRU-ICSS instances, each of
which has two PRU processor cores. The two PRU-ICSS instances are
identical to each other, and are very similar to the PRU-ICSS1 of
AM33xx/AM43xx except for a few minor differences like the RAM sizes
and the number of interrupts coming into the MPU INTC. They do
not have a programmable module reset line unlike those present on
AM33xx/AM43xx SoCs. The modules are reset just like any other IP
with the SoC's global cold/warm resets. Each PRU-ICSS's INTC is also
preceded by a Crossbar that enables multiple external events to be
routed to a specific number of input interrupt events. Any interrupt
event directed towards PRUSS needs this crossbar to be setup properly
on the firmware side.
The existing PRUSS platform driver has been enhanced to support
these AM57xx PRU-ICSS instances through new AM57xx specific
compatible for properly probing and booting all the different PRU
cores in each PRU-ICSS processor subsystem. A build dependency with
SOC_DRA7XX is also added to enable the driver to be built in
AM57xx-only configuration (there is no separate Kconfig option
for AM57xx vs DRA7xx).
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The AM437x SoCs have two different PRU-ICSS subsystems: PRU-ICSS1
and a smaller PRU-ICSS0. Enhance the PRUSS platform driver to support
both the PRU-ICSS sub-systems on these SoCs.
The PRU-ICSS1 on AM437x is very similar to the PRU-ICSS on AM33xx
except for few minor differences - increased Instruction RAM, increased
Shared Data RAM2, and 1 less interrupt (PRUSS host interrupt 7 which is
redirected to the other PRUSS) towards the MPU INTC. The PRU-ICSS0 is
a cut-down version of the IP, with less DRAM per PRU, no Shared DRAM etc.
It also does not have direct access to L3 bus regions, there is a single
interface to L3 for both PRUSS0 and PRUSS1, and it would have to go
through the PRUSS1's interface. The PRUSS_SYSCFG register is reserved on
PRUSS0, so any external access requires the programming the corresponding
PRUSS_SYSCFG register in PRUSS1. It does have its own dedicated I/O lines
though. Note that this instance does not support any PRU Ethernet related
use cases.
The adaptation uses SoC-specific compatibles in the driver and uses
a newly introduced pruss_match_private_data structure and the
pruss_get_private_data() function to retrieve a PRUSS instance specific
data using a device-name based lookup logic. The reset and the L3 external
access are managed by the parent interconnect ti-sysc bus driver so that
PRUSS1 and PRUSS0 can be independently supported.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The Programmable Real-Time Unit - Industrial Communication
Subsystem (PRU-ICSS) is present on various TI SoCs such as
AM335x or AM437x or the Keystone 66AK2G. Each SoC can have
one or more PRUSS instances that may or may not be identical.
For example, AM335x SoCs have a single PRUSS, while AM437x has
two PRUSS instances PRUSS1 and PRUSS0, with the PRUSS0 being
a cut-down version of the PRUSS1.
The PRUSS consists of dual 32-bit RISC cores called the
Programmable Real-Time Units (PRUs), some shared, data and
instruction memories, some internal peripheral modules, and
an interrupt controller. The programmable nature of the PRUs
provide flexibility to implement custom peripheral interfaces,
fast real-time responses, or specialized data handling.
The PRU-ICSS functionality is achieved through three different
platform drivers addressing a specific portion of the PRUSS.
Some sub-modules of the PRU-ICSS IP reuse some of the existing
drivers (like davinci mdio driver or the generic syscon driver).
This design provides flexibility in representing the different
modules of PRUSS accordingly, and at the same time allowing the
PRUSS driver to add some instance specific configuration within
an SoC.
The PRUSS platform driver deals with the overall PRUSS and is
used for managing the subsystem level resources like various
memories and the CFG module. It is responsible for the creation
and deletion of the platform devices for the child PRU devices
and other child devices (like Interrupt Controller, MDIO node
and some syscon nodes) so that they can be managed by specific
platform drivers. The PRUSS interrupt controller is managed by
an irqchip driver, while the individual PRU RISC cores are
managed by a PRU remoteproc driver.
The driver currently supports the AM335x SoC, and support for
other TI SoCs will be added in subsequent patches.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The AM65x SR2.0 Ringacc has fixed errata i2023 "RINGACC, UDMA: RINGACC and
UDMA Ring State Interoperability Issue after Channel Teardown". This errata
also fixed for J271E SoC.
Use SOC bus data for K3 SoC identification and enable i2023 errate w/a only
for the AM65x SR1.0. This also makes obsolete "ti,dma-ring-reset-quirk" DT
property.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Eliminate the following coccicheck warning:
drivers/soc/sunxi/sunxi_sram.c:197:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200910140546.1191280-1-yanaijie@huawei.com
The busy loop in rpmh_rsc_send_data() is written with the assumption
that the udelay will be preempted by the tcs_tx_done() irq handler when
the TCS slots are all full. This doesn't hold true when the calling
thread is an irqthread and the tcs_tx_done() irq is also an irqthread.
That's because kernel irqthreads are SCHED_FIFO and thus need to
voluntarily give up priority by calling into the scheduler so that other
threads can run.
I see RCU stalls when I boot with irqthreads on the kernel commandline
because the modem remoteproc driver is trying to send an rpmh async
message from an irqthread that needs to give up the CPU for the rpmh
irqthread to run and clear out tcs slots.
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 0-....: (1 GPs behind) idle=402/1/0x4000000000000002 softirq=2108/2109 fqs=4920
(t=21016 jiffies g=2933 q=590)
Task dump for CPU 0:
irq/11-smp2p R running task 0 148 2 0x00000028
Call trace:
dump_backtrace+0x0/0x154
show_stack+0x20/0x2c
sched_show_task+0xfc/0x108
dump_cpu_task+0x44/0x50
rcu_dump_cpu_stacks+0xa4/0xf8
rcu_sched_clock_irq+0x7dc/0xaa8
update_process_times+0x30/0x54
tick_sched_handle+0x50/0x64
tick_sched_timer+0x4c/0x8c
__hrtimer_run_queues+0x21c/0x36c
hrtimer_interrupt+0xf0/0x22c
arch_timer_handler_phys+0x40/0x50
handle_percpu_devid_irq+0x114/0x25c
__handle_domain_irq+0x84/0xc4
gic_handle_irq+0xd0/0x178
el1_irq+0xbc/0x180
save_return_addr+0x18/0x28
return_address+0x54/0x88
preempt_count_sub+0x40/0x88
_raw_spin_unlock_irqrestore+0x4c/0x6c
___ratelimit+0xd0/0x128
rpmh_rsc_send_data+0x24c/0x378
__rpmh_write+0x1b0/0x208
rpmh_write_async+0x90/0xbc
rpmhpd_send_corner+0x60/0x8c
rpmhpd_aggregate_corner+0x8c/0x124
rpmhpd_set_performance_state+0x8c/0xbc
_genpd_set_performance_state+0xdc/0x1b8
dev_pm_genpd_set_performance_state+0xb8/0xf8
q6v5_pds_disable+0x34/0x60 [qcom_q6v5_mss]
qcom_msa_handover+0x38/0x44 [qcom_q6v5_mss]
q6v5_handover_interrupt+0x24/0x3c [qcom_q6v5]
handle_nested_irq+0xd0/0x138
qcom_smp2p_intr+0x188/0x200
irq_thread_fn+0x2c/0x70
irq_thread+0xfc/0x14c
kthread+0x11c/0x12c
ret_from_fork+0x10/0x18
This busy loop naturally lends itself to using a wait queue so that each
thread that tries to send a message will sleep waiting on the waitqueue
and only be woken up when a free slot is available. This should make
things more predictable too because the scheduler will be able to sleep
tasks that are waiting on a free tcs instead of the busy loop we
currently have today.
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200724211711.810009-1-sboyd@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
For easy understanding of architecture and alphabetical merging, this
patch uses ARM32/ARM64 for description.
This prepares for sorting the menu.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bliiv54u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Change the RACPREFDATA(x) setting to prefetch the next 256-byte line
after 4 consecutive lines have been used, instead of after 2 consecutive
lines. This does improve the synthetic memcpy benchmark by an additional
+0.5% on top of the previous change for Cortex-A72 CPUs.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Change the RAC prefetch distance from +/- 1 to +/- 2 for Cortex-A72 CPUs
since this provides an average of a 3.8% performance increase for
synthetic memcpy benchmarks.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
72165 uses a Brahma-B53 CPU and its Bus Interface Unit, tune it
according to the existing values we have.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
72164 uses a Brahma-B53 CPU and its Bus Interface Unit, tune it
according to the existing values we have.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Now, Renesas SoC drivers are under menu, but current descriptions are
not aligned.
This patch aligns them.
- Emma Mobile EV2
- RZ/A1H (R7S72100)
...
- R-Car H2 (R8A77900)
...
- Renesas R-Car H3 ES1.x SoC Platform
...
- R-Car H2 System Controller support
- R-Car M2-W/N System Controller support
- R-Car V2H System Controller support
- R-Car E2 System Controller support
- R-Car H3 System Controller support
- R-Car M3-W System Controller support
- R-Car M3-W+ System Controller support
- R-Car M3-N System Controller support
+ SoC Platform support for Emma Mobile EV2
+ SoC Platform support for RZ/A1H+
...
+ SoC Platform support for R-Car H2
...
+ SoC Platform support for R-Car H3 ES1.x
...
+ System Controller support for R-Car H2
+ System Controller support for R-Car M2-W/N
+ System Controller support for R-Car V2H
+ System Controller support for R-Car E2
+ System Controller support for R-Car H3
+ System Controller support for R-Car M3-W
+ System Controller support for R-Car M3-W+
+ System Controller support for R-Car M3-N
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zh6kyedc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Renesas related SoC settings are located on TOP level menu,
thus it is very verbose.
This patch groups Renesas related settings into
"Renesas SoC driver support" menu.
And it aligns config menu names.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0xxho7t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The OPP core manages various resources, e.g. clocks or interconnect paths.
These resources are looked up when the OPP table is allocated once
dev_pm_opp_get_opp_table() is called the first time (either directly
or indirectly through one of the many helper functions).
At this point, the resources may not be available yet, i.e. looking them
up will result in -EPROBE_DEFER. Unfortunately, dev_pm_opp_get_opp_table()
is currently unable to propagate this error code since it only returns
the allocated OPP table or NULL.
This means that all consumers of the OPP core are required to make sure
that all necessary resources are available. Usually this happens by
requesting them, checking the result and releasing them immediately after.
For example, we have added "dev_pm_opp_of_find_icc_paths(dev, NULL)" to
several drivers now just to make sure the interconnect providers are
ready before the OPP table is allocated. If this call is missing,
the OPP core will only warn about this and then attempt to continue
without interconnect. This will eventually fail horribly, e.g.:
cpu cpu0: _allocate_opp_table: Error finding interconnect paths: -517
... later ...
of: _read_bw: Mismatch between opp-peak-kBps and paths (1 0)
cpu cpu0: _opp_add_static_v2: opp key field not found
cpu cpu0: _of_add_opp_table_v2: Failed to add OPP, -22
This example happens when trying to use interconnects for a CPU OPP
table together with qcom-cpufreq-nvmem.c. qcom-cpufreq-nvmem calls
dev_pm_opp_set_supported_hw(), which ends up allocating the OPP table
early. To fix the problem with the current approach we would need to add
yet another call to dev_pm_opp_of_find_icc_paths(dev, NULL).
But actually qcom-cpufreq-nvmem.c has nothing to do with interconnects...
This commit attempts to make this more robust by allowing
dev_pm_opp_get_opp_table() to return an error pointer. Fixing all
the usages is trivial because the function is usually used indirectly
through another helper (e.g. dev_pm_opp_set_supported_hw() above).
These other helpers already return an error pointer.
The example above then works correctly because set_supported_hw() will
return -EPROBE_DEFER, and qcom-cpufreq-nvmem.c already propagates that
error. It should also be possible to remove the remaining usages of
"dev_pm_opp_of_find_icc_paths(dev, NULL)" from other drivers as well.
Note that this commit currently only handles -EPROBE_DEFER for the
clock/interconnects within _allocate_opp_table(). Other errors are just
ignored as before. Eventually those should be propagated as well.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
[ Viresh: skip checking return value of dev_pm_opp_get_opp_table() for
EPROBE_DEFER in domain.c, fix NULL return value and reorder
code a bit in core.c, and update exynos-asv.c ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
We must re-enable the RTC module clock enabled in RTC+DDR suspend, and
pm33xx has been using platform data callbacks for that. Looks like for
retention suspend the RTC module clock must not be re-enabled.
To remove the legacy platform data callbacks, and eventually be able to
drop the RTC legacy platform data, let's manage the RTC module clock
and register range directly in pm33xx.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
dev_err_probe() can reduce code size, uniform error handling and record the
defer probe reason etc., use it to simplify the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is no need to have the 'struct regmap *syscon_regmap' variable
static since new value always be assigned before use it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200715024701.28356-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This is the only part of plat-samsung that is really
shared between the s3c and s5p ports. Moving it to
drivers/soc/ lets us make them completely independent.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-16-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Let's add omap4 and 5 l4_abe interconnect instance for the power
domain.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Let's configure only sgx power domain for am3 and am4 to start with.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The PRM controller has currently only support for resets while the power
domains are still handled in the platform code.
Let's add basic power domain support to enable and disable a PRM
controlled power domain if configured in the devicetree. This can be
used for various hardware accelerators, and interconnect instances.
Further support can be added later on as needed for runtime configuration
based on domain-idle-states.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
BCM6318, BCM6328, BCM6362 and BCM63268 SoCs have a power domain controller
to enable/disable certain components in order to save power.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <F.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Brahma-B53 and Cortex-A72 CPUs integrated on Broadcom STB SoCs feature a
read-ahead cache that performs cache line size adaptation between the
bus interface unit and the memory controller.
On 32-bit ARM kernels we have to resort to a full featured read-ahead
cache driver under arch/arm/mm/cache-b15-rac.c (CONFIG_CACHE_B15_RAC)
because there are still cache maintenance operations by set/ways/index
that cannot be transparently handled by the ARM Coherency Extension that
the read-ahead cache interfaces to.
The 64-bit ARM kernel however has long deprecated all of those, so this
is simply a one time configuration.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Pull misc vfs updates from Al Viro:
"No common topic whatsoever in those, sorry"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: define inode flags using bit numbers
iov_iter: Move unnecessary inclusion of crypto/hash.h
dlmfs: clean up dlmfs_file_{read,write}() a bit
framework we just have some minor tweaks and a debugfs feature, so not much to
see there. The driver updates are fairly well split between AT91 and Qualcomm
clk support. Adding those two drivers together equals about 50% of the
diffstat. Otherwise, the big amount of work this time was on supporting
Broadcom's Raspberry Pi firmware clks. See below for some more highlights.
Core:
- Document clk_hw_round_rate() so it gets some more use
- Remove unused __clk_get_flags()
- Add a prepare/enable debugfs feature similar to rate setting
New Drivers:
- Add support for SAMA7G5 SoC clks
- Enable CPU clks on Qualcomm IPQ6018 SoCs
- Enable CPU clks on Qualcomm MSM8996 SoCs
- GPU clk support for Qualcomm SM8150 and SM8250 SoCs
- Audio clks on Qualcomm SC7180 SoCs
- Microchip Sparx5 DPLL clk
- Add support for the new Renesas RZ/G2H (R8A774E1) SoC
Updates:
- Make defines for bcm63xx-gate clks to use in DT
- Support BCM2711 SoC firmware clks
- Add HDMI clks for BCM2711 SoCs
- Add RTC related clks on Ingenic SoCs
- Support USB PHY clks on Ingenic SoCs
- Support gate clks on BCM6318 SoCs
- RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
- Use poll_timeout functions in Rockchip clk driver
- Support Rockchip rk3288w SoC variant
- Mark mac_lbtest critical on Rockchip rk3188
- Add CAAM clock support for i.MX vf610 driver
- Add MU root clock support for i.MX imx8mp driver
- Amlogic g12: add neural network accelerator clock sources
- Amlogic meson8: remove critical flag for main PLL divider
- Amlogic meson8: add video decoder clock gates
- Convert one more Renesas DT binding to json-schema
- Enhance critical clock handling on Renesas platforms to only consider
clocks that were enabled at boot time
-----BEGIN PGP SIGNATURE-----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=QLRg
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"It looks like a smaller batch of clk updates this time around.
In the core framework we just have some minor tweaks and a debugfs
feature, so not much to see there. The driver updates are fairly well
split between AT91 and Qualcomm clk support. Adding those two drivers
together equals about 50% of the diffstat.
Otherwise, the big amount of work this time was on supporting
Broadcom's Raspberry Pi firmware clks.
Highlights:
Core:
- Document clk_hw_round_rate() so it gets some more use
- Remove unused __clk_get_flags()
- Add a prepare/enable debugfs feature similar to rate setting
New Drivers:
- Add support for SAMA7G5 SoC clks
- Enable CPU clks on Qualcomm IPQ6018 SoCs
- Enable CPU clks on Qualcomm MSM8996 SoCs
- GPU clk support for Qualcomm SM8150 and SM8250 SoCs
- Audio clks on Qualcomm SC7180 SoCs
- Microchip Sparx5 DPLL clk
- Add support for the new Renesas RZ/G2H (R8A774E1) SoC
Updates:
- Make defines for bcm63xx-gate clks to use in DT
- Support BCM2711 SoC firmware clks
- Add HDMI clks for BCM2711 SoCs
- Add RTC related clks on Ingenic SoCs
- Support USB PHY clks on Ingenic SoCs
- Support gate clks on BCM6318 SoCs
- RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
- Use poll_timeout functions in Rockchip clk driver
- Support Rockchip rk3288w SoC variant
- Mark mac_lbtest critical on Rockchip rk3188
- Add CAAM clock support for i.MX vf610 driver
- Add MU root clock support for i.MX imx8mp driver
- Amlogic g12: add neural network accelerator clock sources
- Amlogic meson8: remove critical flag for main PLL divider
- Amlogic meson8: add video decoder clock gates
- Convert one more Renesas DT binding to json-schema
- Enhance critical clock handling on Renesas platforms to only
consider clocks that were enabled at boot time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits)
clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845
ipq806x: gcc: add support for child probe
clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static
clk: qcom: ipq8074: Add correct index for PCIe clocks
clk: <linux/clk-provider.h>: drop a duplicated word
clk: renesas: cpg-mssr: Add r8a774e1 support
dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1
clk: Drop duplicate selection in Kconfig
clk: qcom: smd: Add support for MSM8992/4 rpm clocks
clk: qcom: ipq8074: Add missing clocks for pcie
dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe
Replace HTTP links with HTTPS ones: Common CLK framework
clk: qcom: Add CPU clock driver for msm8996
dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
soc: qcom: Separate kryo l2 accessors from PMU driver
clk: meson: meson8b: add the vclk2_en gate clock
clk: meson: meson8b: add the vclk_en gate clock
clk: qcom: Fix return value check in apss_ipq6018_probe()
clk: bcm: dvp: Add missing module informations
clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2
...
A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory
subsystem and its drivers, starting out with a set of cleanup
patches.
A larger driver for the Tegra memory controller that was accidentally
missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware blobs
The tegra firmware driver gets extended to export some debug information
Various updates to i.MX firmware drivers, mostly cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space.
A new firmware based trusted platform module (fTPM) driver is added
based on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for identifying
a machine through the SMCCC ARCH_SOC_ID firmware interface rather than
by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device code.
There are also a number of updates to SoC specific drivers,
the main ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver
-----BEGIN PGP SIGNATURE-----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=nezz
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
This fixes a potential race condition with remoteprocs by not sending
acknowledgements until after registered drivers has processed the event.
It adds IPQ6018 support to the SMD RPM driver, fixes kerneldoc in the
same and converts the related DT binding to YAML.
Finally it fixes a compilation warning in the geni serial engine driver
when compiled without CONFIG_SERIAL_EARLYCON.
-----BEGIN PGP SIGNATURE-----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=7TeI
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver additional updates for 5.9
This fixes a potential race condition with remoteprocs by not sending
acknowledgements until after registered drivers has processed the event.
It adds IPQ6018 support to the SMD RPM driver, fixes kerneldoc in the
same and converts the related DT binding to YAML.
Finally it fixes a compilation warning in the geni serial engine driver
when compiled without CONFIG_SERIAL_EARLYCON.
* tag 'qcom-drivers-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
soc: qcom: pdr: Reorder the PD state indication ack
dt-bindings: soc: qcom: smd-rpm: Convert binding to YAML schema
soc: qcom: smd-rpm: Add IPQ6018 compatible
dt-bindings: soc: qcom: smd-rpm: Add IPQ6018 compatible
Link: https://lore.kernel.org/r/20200730051852.649761-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If CONFIG_SERIAL_EARLYCON is not set, gcc warns this:
drivers/soc/qcom/qcom-geni-se.c: In function 'geni_se_probe'
drivers/soc/qcom/qcom-geni-se.c:914:1: warning: label 'exit' defined but not used [-Wunused-label]
exit:
^~~~
Fixes: 048eb908a1 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200722020619.25988-1-yuehaibing@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fix W=1 compile warnings (invalid kerneldoc):
drivers/soc/qcom/smd-rpm.c:35: warning: Function parameter or member 'dev' not described in 'qcom_smd_rpm'
drivers/soc/qcom/smd-rpm.c:99: warning: Function parameter or member 'state' not described in 'qcom_rpm_smd_write'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200729074415.28393-2-krzk@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Protection Domains (PD) have a mechanism to keep its resources
enabled until the PD down indication is acked. Reorder the PD state
indication ack so that clients get to release the relevant resources
before the PD goes down.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Fixes: fbe639b44a ("soc: qcom: Introduce Protection Domain Restart helpers")
Reported-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200701195954.9007-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
- TI K3 Ring Accelerator updates
- Few non critical warining fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Y8Sq
-----END PGP SIGNATURE-----
Merge tag 'drivers_soc_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers
SOC: TI Keystone driver update for v5.9
- TI K3 Ring Accelerator updates
- Few non critical warining fixes
* tag 'drivers_soc_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
soc: ti/ti_sci_protocol.h: drop a duplicated word + clarify
soc: ti: k3: fix semicolon.cocci warnings
soc: ti: k3-ringacc: fix: warn: variable dereferenced before check 'ring'
dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair
soc: ti: k3-ringacc: separate soc specific initialization
soc: ti: k3-ringacc: add request pair of rings api.
soc: ti: k3-ringacc: add ring's flags to dump
soc: ti: k3-ringacc: Move state tracking variables under a struct
dt-bindings: soc: ti: k3-ringacc: convert bindings to json-schema
Link: https://lore.kernel.org/r/1595711814-7015-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The sparse tool complains as follows:
drivers/soc/ti/knav_qmss_acc.c:453:23: warning:
symbol 'knav_acc_range_ops' was not declared. Should it be static?
'knav_acc_range_ops' is not used outside of knav_qmss_acc.c,
so marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Separate SoC specific initialization and and OF mach data in preparation of
adding support for more K3 SoCs
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Add new API k3_ringacc_request_rings_pair() to request pair of rings at
once, as in the most cases Rings are used with DMA channels, which need to
request pair of rings - one to feed DMA with descriptors (TX/RX FDQ) and
one to receive completions (RX/TX CQ). This will allow to simplify Ringacc
API users.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Add struct k3_ring *ring->flags to the ring dump.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Move the free, occ, windex and rindex under a struct. We can use memset to
zero them and it will allow a cleaner way to extend driver functionality in
the future,
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
For RPMh this fixes an issue where ktime was used during suspend, allows
the driver to be used on ARM targets and some minor cleanups.
It adds support for the latest format version in the socinfo driver and
adds identifiers for SM8250 and SDM630.
SMD-RPM gains compatibles for MSM8994 and MSM8936 and the Qualcomm SCM
gains compatibles MSM8994 and IPQ8074.
The GENI core code gains interconnect path voting and performance level
support, with subsequent patches integrating this with the SPI, I2C,
UART and QSPI drivers.
Following this the KGDB support for the GENI serial driver is improved,
the performance related to chip-select is improved for SPI and QSPI.
-----BEGIN PGP SIGNATURE-----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=Os4F
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.9
For RPMh this fixes an issue where ktime was used during suspend, allows
the driver to be used on ARM targets and some minor cleanups.
It adds support for the latest format version in the socinfo driver and
adds identifiers for SM8250 and SDM630.
SMD-RPM gains compatibles for MSM8994 and MSM8936 and the Qualcomm SCM
gains compatibles MSM8994 and IPQ8074.
The GENI core code gains interconnect path voting and performance level
support, with subsequent patches integrating this with the SPI, I2C,
UART and QSPI drivers.
Following this the KGDB support for the GENI serial driver is improved,
the performance related to chip-select is improved for SPI and QSPI.
* tag 'qcom-drivers-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (35 commits)
soc: qcom: geni: Fix NULL pointer dereference
tty: serial: qcom-geni-serial: Drop the icc bw votes in suspend for console
serial: qcom_geni_serial: Always use 4 bytes per TX FIFO word
serial: qcom_geni_serial: Make kgdb work even if UART isn't console
spi: spi-geni-qcom: Get rid of most overhead in prepare_message()
spi: spi-geni-qcom: Set the clock properly at runtime resume
spi: spi-geni-qcom: Avoid clock setting if not needed
spi: spi-qcom-qspi: Set an autosuspend delay of 250 ms
spi: spi-qcom-qspi: Avoid clock setting if not needed
spi: spi-qcom-qspi: Use OPP API to set clk/perf state
firmware: qcom_scm: Add msm8994 compatible
firmware: qcom_scm: Fix legacy convention SCM accessors
<linux/of.h>: add stub for of_get_next_parent() to fix qcom build error
dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC
spi: spi-geni-qcom: Use OPP API to set clk/perf state
tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state
spi: spi-qcom-qspi: Add interconnect support
spi: spi-geni-qcom: Add interconnect support
spi: spi-geni-qcom: Combine the clock setting code
tty: serial: qcom_geni_serial: Add interconnect support
...
Link: https://lore.kernel.org/r/20200721044812.3429652-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Update SCU irq code to call pm_system_wakeup() in general MU IRQ
handler, so that system can be waked up when MU IRQ arrives.
- Move i.MX SCU soc driver into imx firmware folder to get it
initialized from i.MX SCU firmware driver.
- Clean up soc-imx-scu driver a bit by using devm_kasprintf().
- Correct postfix setting for cm40 power domain in scu-pd driver.
- Add resource management support for IMX_SCU firmware driver.
- Add more cm4 resources to i.MX SCU power domain driver.
- Select ARM_GIC_V3 from SOC_IMX8M for being able to use GICv3 driver
in AARCH32 mode Linux on AARCH64 hardware.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl8VPiUUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5L9wf/VY0Q2oZ+gaJRNhSfVSf7O7QpscHV
mtQZPHg81jv3D2NkOpycJ1vaJEo118Ho6vb5IfeheChyZ2eWEJKkaPpVuhyKjPhK
B+nUmFnsTm8MTL+GKA1W7g6Gg+lJN3wT/mOITNmGMW0NID4/rse/XeM18+28nNb/
2svVyc1+4uTM5m+4i+scBCdnxgBK2H71/DQYLfDvNtZesWzas1PNN1nJh10D/PMM
X6d7AZ92c//pf5eR3wpm/JKZ+hubefBNWkrpw50pNlAASbgOogXWL1GU9q3r/VAV
9dS0dW9mIlpqlONEO+2zv9v1/RnoUypkCe/FFTUsA1bJ7ZGqhxWmrYwyfg==
=7Pd6
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers change for 5.9:
- Update SCU irq code to call pm_system_wakeup() in general MU IRQ
handler, so that system can be waked up when MU IRQ arrives.
- Move i.MX SCU soc driver into imx firmware folder to get it
initialized from i.MX SCU firmware driver.
- Clean up soc-imx-scu driver a bit by using devm_kasprintf().
- Correct postfix setting for cm40 power domain in scu-pd driver.
- Add resource management support for IMX_SCU firmware driver.
- Add more cm4 resources to i.MX SCU power domain driver.
- Select ARM_GIC_V3 from SOC_IMX8M for being able to use GICv3 driver
in AARCH32 mode Linux on AARCH64 hardware.
* tag 'imx-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: select ARM_GIC_V3 for i.MX8M
firmware: imx: Move i.MX SCU soc driver into imx firmware folder
firmware: imx: scu-pd: add more cm4 resources
firmware: imx: add resource management api
firmware: imx: scu-pd: fix cm40 power domain
soc: imx: scu: use devm_kasprintf
firmware: imx: make sure MU irq can wake up system from suspend mode
Link: https://lore.kernel.org/r/20200720085536.24138-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a simple custom voltage regulator coupler for Exynos5800 SoCs, which
require coupling between "vdd_arm" and "vdd_int" regulators. This coupler
ensures that the voltage values don't go below the bootloader-selected
operation point during the boot process until the clients set their
constraints. It is achieved by assuming minimal voltage value equal to
the current value if no constraints are set. This also ensures proper
voltage balancing if any of the client driver is missing.
The balancing code comes from the regulator/core.c with the additional
logic for handling regulators without client constraints applied added.
Link: https://lore.kernel.org/r/20200721180900.13844-5-krzk@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
pdev struct doesn't exits for the devices whose status are disabled
from DT node, in such cases NULL is returned from 'of_find_device_by_node'
Later when we try to get drvdata from pdev struct NULL pointer dereference
is triggered.
Add a NULL check for return values to fix the issue.
We were hitting this issue when one of QUP is disabled.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 048eb908a1 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash")
Reported-by: Sai Prakash Ranjan <saipraka@codeaurora.org>
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Link: https://lore.kernel.org/r/1594996342-26964-1-git-send-email-akashast@codeaurora.org
[bjorn: s/wrapper_pdev/pdev/]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This adds missing SoC IDs for Tegra186 and Tegra194 and fixes a typo in
a warning message.
-----BEGIN PGP SIGNATURE-----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=B2af
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.9-rc1
This adds missing SoC IDs for Tegra186 and Tegra194 and fixes a typo in
a warning message.
* tag 'tegra-for-5.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: Fix typo in APB MISC warning
soc/tegra: fuse: Add Tegra186 and Tegra194 SoC IDs
Link: https://lore.kernel.org/r/20200717161300.1661002-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add core support for the new RZ/G2H (R8A774E1) SoC, including System
Controller (SYSC) and Reset (RST) support.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXxFlJQAKCRCKwlD9ZEnx
cBc5AQDuPW0JS4eKE+oARQ3EMxw3ZrEA1zzleiML19YnvEy5YgEA0UsdDlPGnRs1
dZruiWUH9xu4n7zWVZshKf2BBSSTWw0=
=+Zex
-----END PGP SIGNATURE-----
Merge tag 'renesas-drivers-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.9
- Add core support for the new RZ/G2H (R8A774E1) SoC, including System
Controller (SYSC) and Reset (RST) support.
* tag 'renesas-drivers-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: rcar-rst: Add support for RZ/G2H
soc: renesas: Identify RZ/G2H
soc: renesas: Add Renesas R8A774E1 config option
soc: renesas: rcar-sysc: Add r8a774e1 support
clk: renesas: Add r8a774e1 CPG Core Clock Definitions
dt-bindings: power: Add r8a774e1 SYSC power domain definitions
Link: https://lore.kernel.org/r/20200717112427.26032-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- assign value to register
- export finalize function and don't call explicitely from flush async
- set specific event
-----BEGIN PGP SIGNATURE-----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=+rna
-----END PGP SIGNATURE-----
Merge tag 'v5.8-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
add new functions to cmdq helper functions
- assign value to register
- export finalize function and don't call explicitely from flush async
- set specific event
* tag 'v5.8-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: cmdq: add set event function
soc: mediatek: cmdq: export finalize function
soc: mediatek: cmdq: add assign function
Link: https://lore.kernel.org/r/01399fb4-b2d0-e41b-dfd9-f2deba0ef651@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A couple of fixes on i.MX platform device registration code to stop
the use of invalid IRQ 0.
- Fix a regression seen on ls1021a platform, caused by commit
52102a3ba6 ("soc: imx: move cpu code to drivers/soc/imx").
- Fix a misconfiguration of audio SSI on imx6qdl-gw551x board.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl8Nxv4UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4fIAf/SKUzFbQ/INaU98yW8zONnZVzD/jI
3oTnBP87YJRNiyrLF1lWLs55vfnhum7yXJZXdMbwP55fdJKVaV4StePGz9Sh4Gba
4COHOF3XvF73b4kpcCQEr1U+Y0KHEfMbkwONmerk9ZkRThY2uqcRsdj4br+XA9eU
19ppWdOYZHMjegPu0KuxJlevZJDO6s9I4MCKFWmGgWhanLeGXXd2xtJEgqTWtTnS
EFjOFdBQF+5yd0VY/j6WHBDHWa/fXhDFoAO8Wc5LMCP3VybZdciIi4mN8y0UZoNG
Q5UnBvpYMCqrBwVlyqgeDtJUvYd+33dHqsRbU3KN8yBpRnyHupR9UvcFLA==
=+Gmy
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.8, round 2:
- A couple of fixes on i.MX platform device registration code to stop
the use of invalid IRQ 0.
- Fix a regression seen on ls1021a platform, caused by commit
52102a3ba6 ("soc: imx: move cpu code to drivers/soc/imx").
- Fix a misconfiguration of audio SSI on imx6qdl-gw551x board.
* tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: check ls1021a
ARM: imx: Remove imx_add_imx_dma() unused irq_err argument
ARM: imx: Provide correct number of resources when registering gpio devices
ARM: dts: imx6qdl-gw551x: fix audio SSI
Link: https://lore.kernel.org/r/20200714145649.GP15718@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When using the geni-serial as console, its important to be
able to hit the lowest possible power state in suspend,
even with no_console_suspend.
The only thing that prevents it today on platforms like the sc7180
is the interconnect BW votes, which we certainly don't need when
the system is in suspend. So in the suspend handler mark them as
ACTIVE_ONLY (0x3) and on resume switch them back to the ALWAYS tag (0x7)
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1594704709-26072-1-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Select ARM_GIC_V3, then it is able to use gic v3 driver in aarch32
mode linux on aarch64 hardware. For aarch64 mode, it not hurts
to select ARM_GIC_V3.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
fsl,ls1021a is a mach under arch/arm/mach-imx/, however it could
not use the soc driver which will break caam on ls1021a platform.
So directly return if it is compatible with fsl,ls1021a.
Fixes: 52102a3ba6 ("soc: imx: move cpu code to drivers/soc/imx")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX SCU soc driver depends on SCU firmware driver, so it has to
use platform driver model for proper defer probe operation, since
it has no device binding in DT file, a simple platform device is
created together inside the platform driver. To make it more clean,
we can just move the entire SCU soc driver into imx firmware folder
and initialized by i.MX SCU firmware driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The driver provides kernel level API for other drivers
to access the MSM8996 L2 cache registers.
Separating the L2 access code from the PMU driver and
making it public to allow other drivers use it.
The accesses must be separated with a single spinlock,
maintained in this driver.
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1593766185-16346-2-git-send-email-loic.poulain@linaro.org
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
1. Addition of ARM SMCCC ARCH_SOC_ID support
2. Usage of the custom soc attribute groups already supported in the
infrastucture instead of device_create_file which eliminates the need
for any cleanup when soc is unregistered
3. Minor clean up switching to use standard DEVICE_ATTR_RO() instead of
direct __ATTR
-----BEGIN PGP SIGNATURE-----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=JTXs
-----END PGP SIGNATURE-----
Merge tag 'soc-attr-updates-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
SoC attributes update for v5.9
1. Addition of ARM SMCCC ARCH_SOC_ID support
2. Usage of the custom soc attribute groups already supported in the
infrastucture instead of device_create_file which eliminates the need
for any cleanup when soc is unregistered
3. Minor clean up switching to use standard DEVICE_ATTR_RO() instead of
direct __ATTR
* tag 'soc-attr-updates-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: smccc: Add ARCH_SOC_ID support
ARM: OMAP2: Use custom soc attribute group instead of device_create_file
ARM: OMAP2: Switch to use DEVICE_ATTR_RO()
soc: ux500: Use custom soc attribute group instead of device_create_file
soc: ux500: Switch to use DEVICE_ATTR_RO()
soc: integrator: Use custom soc attribute group instead of device_create_file
soc: integrator: Switch to use DEVICE_ATTR_RO()
soc: realview: Use custom soc attribute group instead of device_create_file
soc: realview: Switch to use DEVICE_ATTR_RO()
Link: https://lore.kernel.org/r/20200706165312.40697-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit c31e73121f ("base: soc: Handle custom soc information sysfs
entries") introduced custom soc attribute group in soc_device_attribute
structure but there are no users treewide. While trying to understand
the motivation and tried to use it, it was found lot of existing custom
attributes can moved to use it instead of device_create_file.
Though most of these never remove/cleanup the custom attribute as they
never call soc_device_unregister, using these custom attribute group
eliminate the need for any cleanup as the driver infrastructure will
take care of that.
Let us remove device_create_file and start using the custom attribute
group in soc_device_attribute.
Link: https://lore.kernel.org/r/20200523170859.50003-7-sudeep.holla@arm.com
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Move device attributes to DEVICE_ATTR_RO() as that would make things
a lot more "obvious" what is happening over the existing __ATTR usage.
Link: https://lore.kernel.org/r/20200523170859.50003-6-sudeep.holla@arm.com
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Commit c31e73121f ("base: soc: Handle custom soc information sysfs
entries") introduced custom soc attribute group in soc_device_attribute
structure but there are no users treewide. While trying to understand
the motivation and tried to use it, it was found lot of existing custom
attributes can moved to use it instead of device_create_file.
Though most of these never remove/cleanup the custom attribute as they
never call soc_device_unregister, using these custom attribute group
eliminate the need for any cleanup as the driver infrastructure will
take care of that.
Let us remove device_create_file and start using the custom attribute
group in soc_device_attribute.
Link: https://lore.kernel.org/r/20200523170859.50003-5-sudeep.holla@arm.com
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Move device attributes to DEVICE_ATTR_RO() as that would make things
a lot more "obvious" what is happening over the existing __ATTR usage.
Link: https://lore.kernel.org/r/20200523170859.50003-4-sudeep.holla@arm.com
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Commit c31e73121f ("base: soc: Handle custom soc information sysfs
entries") introduced custom soc attribute group in soc_device_attribute
structure but there are no users treewide. While trying to understand
the motivation and tried to use it, it was found lot of existing custom
attributes can moved to use it instead of device_create_file.
Though most of these never remove/cleanup the custom attribute as they
never call soc_device_unregister, using these custom attribute group
eliminate the need for any cleanup as the driver infrastructure will
take care of that.
Let us remove device_create_file and start using the custom attribute
group in soc_device_attribute.
Link: https://lore.kernel.org/r/20200523170859.50003-3-sudeep.holla@arm.com
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Move device attributes to DEVICE_ATTR_RO() as that would make things
a lot more "obvious" what is happening over the existing __ATTR usage.
Link: https://lore.kernel.org/r/20200523170859.50003-2-sudeep.holla@arm.com
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The header file linux/uio.h includes crypto/hash.h which pulls in
most of the Crypto API. Since linux/uio.h is used throughout the
kernel this means that every tiny bit of change to the Crypto API
causes the entire kernel to get rebuilt.
This patch fixes this by moving it into lib/iov_iter.c instead
where it is actually used.
This patch also fixes the ifdef to use CRYPTO_HASH instead of just
CRYPTO which does not guarantee the existence of ahash.
Unfortunately a number of drivers were relying on linux/uio.h to
provide access to linux/slab.h. This patch adds inclusions of
linux/slab.h as detected by build failures.
Also skbuff.h was relying on this to provide a declaration for
ahash_request. This patch adds a forward declaration instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The OMAP developers are particularly active at hunting down regressions,
so this is a separate branch with OMAP specific fixes for the v5.8:
As Tony explains
"The recent display subsystem (DSS) related platform data changes
caused display related regressions for suspend and resume. Looks like
I only tested suspend and resume before dropping the legacy platform
data, and forgot to test it after dropping it. Turns out the main issue
was that we no longer have platform code calling pm_runtime_suspend
for DSS like we did for the legacy platform data case, and that fix
is still being discussed on the dri-devel list and will get merged
separately. The DSS related testing exposed a pile other other display
related issues that also need fixing though":
- Fix ti-sysc optional clock handling and reset status checks
for devices that reset automatically in idle like DSS
- Ignore ti-sysc clockactivity bit unless separately requested
to avoid unexpected performance issues
- Init ti-sysc framedonetv_irq to true and disable for am4
- Avoid duplicate DSS reset for legacy mode with dts data
- Remove LCD timings for am4 as they cause warnings now that we're
using generic panels
Other OMAP changes from Tony include:
- Fix omap_prm reset deassert as we still have drivers setting the
pm_runtime_irq_safe() flag
- Flush posted write for ti-sysc enable and disable
- Fix droid4 spi related errors with spi flags
- Fix am335x USB range and a typo for softreset
- Fix dra7 timer nodes for clocks for IPU and DSP
- Drop duplicate mailboxes after mismerge for dra7
- Prevent pocketgeagle header line signal from accidentally setting
micro-SD write protection signal by removing the default mux
- Fix NFSroot flakeyness after resume for duover by switching the
smsc911x gpio interrupt to back to level sensitive
- Fix regression for omap4 clockevent source after recent system
timer changes
- Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid"
phy-mode
- One patch to convert am3/am4 DT files to use the regular sdhci-omap
driver instead of the old hsmmc driver, this was meant for the
merge window but got lost in the process.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=FFTv
-----END PGP SIGNATURE-----
Merge tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM OMAP fixes from Arnd Bergmann:
"The OMAP developers are particularly active at hunting down
regressions, so this is a separate branch with OMAP specific
fixes for v5.8:
As Tony explains
"The recent display subsystem (DSS) related platform data changes
caused display related regressions for suspend and resume. Looks
like I only tested suspend and resume before dropping the legacy
platform data, and forgot to test it after dropping it. Turns out
the main issue was that we no longer have platform code calling
pm_runtime_suspend for DSS like we did for the legacy platform data
case, and that fix is still being discussed on the dri-devel list
and will get merged separately. The DSS related testing exposed a
pile other other display related issues that also need fixing
though":
- Fix ti-sysc optional clock handling and reset status checks for
devices that reset automatically in idle like DSS
- Ignore ti-sysc clockactivity bit unless separately requested to
avoid unexpected performance issues
- Init ti-sysc framedonetv_irq to true and disable for am4
- Avoid duplicate DSS reset for legacy mode with dts data
- Remove LCD timings for am4 as they cause warnings now that we're
using generic panels
Other OMAP changes from Tony include:
- Fix omap_prm reset deassert as we still have drivers setting the
pm_runtime_irq_safe() flag
- Flush posted write for ti-sysc enable and disable
- Fix droid4 spi related errors with spi flags
- Fix am335x USB range and a typo for softreset
- Fix dra7 timer nodes for clocks for IPU and DSP
- Drop duplicate mailboxes after mismerge for dra7
- Prevent pocketgeagle header line signal from accidentally setting
micro-SD write protection signal by removing the default mux
- Fix NFSroot flakeyness after resume for duover by switching the
smsc911x gpio interrupt to back to level sensitive
- Fix regression for omap4 clockevent source after recent system
timer changes
- Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid"
phy-mode
- One patch to convert am3/am4 DT files to use the regular sdhci-omap
driver instead of the old hsmmc driver, this was meant for the
merge window but got lost in the process"
* tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits)
ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode
ARM: dts: Fix omap4 system timer source clocks
ARM: dts: Fix duovero smsc interrupt for suspend
ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect
Revert "bus: ti-sysc: Increase max softreset wait"
ARM: dts: am437x-epos-evm: remove lcd timings
ARM: dts: am437x-gp-evm: remove lcd timings
ARM: dts: am437x-sk-evm: remove lcd timings
ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes
ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks
ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag
ARM: dts: Fix am33xx.dtsi USB ranges length
bus: ti-sysc: Increase max softreset wait
ARM: OMAP2+: Fix legacy mode dss_reset
bus: ti-sysc: Fix uninitialized framedonetv_irq
bus: ti-sysc: Ignore clockactivity unless specified as a quirk
bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit
ARM: dts: omap4-droid4: Fix spi configuration and increase rate
bus: ti-sysc: Flush posted write on enable and disable
soc: ti: omap-prm: use atomic iopoll instead of sleeping one
...
- Fix LDO1 and LDO2 voltage range for a couple of i.MX8M board device
trees.
- Fix i.MX8MP UID fuse offset in i.MX8M SoC driver.
- Fix watchdog configuration in imx6ul-kontron device tree.
- Fix one build warning seen on building soc-imx8m driver with
x86_64-randconfig.
- Add missing put_device() call for a couple of mach-imx PM functions.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl7zM08UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5HNAf+Kw6EPNxYom/MJ4P92gxLAtPA6AO4
+WuLYmSphhgmGAQLFU4UiTH/2sYXmT7fSDwLhfZI5XJp6j8J89Hxe2kyMomvIT92
Xbbzp7fr+2FPGgyI6ImiKTFeSZiT0LPq5fs1uF2lTP6+/SklF9yy5ynUvNULrD4b
iSAXOZkMz6Ft8dn1zYrTKPIYfsTe1zXsDgw8a9sc+0LfgiR5cBTq359jHrN5Q0Tq
NYoOHT+8V5C8BVmzp5I1zoghZEayPT2Ui1JIwBiyVij8KqZvYY3wckjPqgdfQ1vK
IzGksPWRojKAw2RKA59kpUR/pgoZH3GYnfjmCAIOkMnMSgAqz1inZZq2oA==
=iERQ
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.8:
- Fix LDO1 and LDO2 voltage range for a couple of i.MX8M board device
trees.
- Fix i.MX8MP UID fuse offset in i.MX8M SoC driver.
- Fix watchdog configuration in imx6ul-kontron device tree.
- Fix one build warning seen on building soc-imx8m driver with
x86_64-randconfig.
- Add missing put_device() call for a couple of mach-imx PM functions.
* tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx8m: fix build warning
ARM: imx6: add missing put_device() call in imx6q_suspend_init()
ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram()
soc: imx8m: Correct i.MX8MP UID fuse offset
ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain
ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM
arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2
arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range
arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range
Link: https://lore.kernel.org/r/20200624111725.GA24312@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The recent display subsystem (DSS) related platform data changes caused
display related regressions for suspend and resume. Looks like I only
tested suspend and resume before dropping the legacy platform data, and
forgot to test it after dropping it. Turns out the main issue was that
we no longer have platform code calling pm_runtime_suspend for DSS like
we did for the legacy platform data case, and that fix is still being
discussed on the dri-devel list and will get merged separately. The DSS
related testing exposed a pile other other display related issues that
also need fixing though:
- Fix ti-sysc optional clock handling and reset status checks
for devices that reset automatically in idle like DSS
- Ignore ti-sysc clockactivity bit unless separately requested
to avoid unexpected performance issues
- Init ti-sysc framedonetv_irq to true and disable for am4
- Avoid duplicate DSS reset for legacy mode with dts data
- Remove LCD timings for am4 as they cause warnings now that we're
using generic panels
Then there is a pile of other fixes not related to the DSS:
- Fix omap_prm reset deassert as we still have drivers setting the
pm_runtime_irq_safe() flag
- Flush posted write for ti-sysc enable and disable
- Fix droid4 spi related errors with spi flags
- Fix am335x USB range and a typo for softreset
- Fix dra7 timer nodes for clocks for IPU and DSP
- Drop duplicate mailboxes after mismerge for dra7
-----BEGIN PGP SIGNATURE-----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=fT9A
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.8
The recent display subsystem (DSS) related platform data changes caused
display related regressions for suspend and resume. Looks like I only
tested suspend and resume before dropping the legacy platform data, and
forgot to test it after dropping it. Turns out the main issue was that
we no longer have platform code calling pm_runtime_suspend for DSS like
we did for the legacy platform data case, and that fix is still being
discussed on the dri-devel list and will get merged separately. The DSS
related testing exposed a pile other other display related issues that
also need fixing though:
- Fix ti-sysc optional clock handling and reset status checks
for devices that reset automatically in idle like DSS
- Ignore ti-sysc clockactivity bit unless separately requested
to avoid unexpected performance issues
- Init ti-sysc framedonetv_irq to true and disable for am4
- Avoid duplicate DSS reset for legacy mode with dts data
- Remove LCD timings for am4 as they cause warnings now that we're
using generic panels
Then there is a pile of other fixes not related to the DSS:
- Fix omap_prm reset deassert as we still have drivers setting the
pm_runtime_irq_safe() flag
- Flush posted write for ti-sysc enable and disable
- Fix droid4 spi related errors with spi flags
- Fix am335x USB range and a typo for softreset
- Fix dra7 timer nodes for clocks for IPU and DSP
- Drop duplicate mailboxes after mismerge for dra7
* tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
Revert "bus: ti-sysc: Increase max softreset wait"
ARM: dts: am437x-epos-evm: remove lcd timings
ARM: dts: am437x-gp-evm: remove lcd timings
ARM: dts: am437x-sk-evm: remove lcd timings
ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes
ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks
ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag
ARM: dts: Fix am33xx.dtsi USB ranges length
bus: ti-sysc: Increase max softreset wait
ARM: OMAP2+: Fix legacy mode dss_reset
bus: ti-sysc: Fix uninitialized framedonetv_irq
bus: ti-sysc: Ignore clockactivity unless specified as a quirk
bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit
ARM: dts: omap4-droid4: Fix spi configuration and increase rate
bus: ti-sysc: Flush posted write on enable and disable
soc: ti: omap-prm: use atomic iopoll instead of sleeping one
Link: https://lore.kernel.org/r/pull-1591889257-410830@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
QUP core clock is shared among all the SE drivers present on particular
QUP wrapper, the system will reset(unclocked access) if earlycon used after
QUP core clock is put to 0 from other SE drivers before real console comes
up.
As earlycon can't vote for it's QUP core need, to fix this add ICC
support to common/QUP wrapper driver and put vote for QUP core from
probe on behalf of earlycon and remove vote during earlycon exit call.
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1592908737-7068-3-git-send-email-akashast@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The write_tcs_reg_sync() may be called after timekeeping is suspended
so it's not OK to use ktime. The readl_poll_timeout_atomic() macro
implicitly uses ktime. This was causing a warning at suspend time.
Change to just loop 1000000 times with a delay of 1 us between loops.
This may give a timeout of more than 1 second but never less and is
safe even if timekeeping is suspended.
NOTE: I don't have any actual evidence that we need to loop here.
It's possibly that all we really need to do is just read the value
back to ensure that the pipes are cleaned and the looping/comparing is
totally not needed. I never saw the loop being needed in my tests.
However, the loop shouldn't hurt.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Fixes: 91160150ab ("soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync()")
Reported-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200528074530.1.Ib86e5b406fe7d16575ae1bb276d650faa144b63c@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Print sensible string instead of just "(null)" for unknown PMIC models.
Also as we are at it, do not let debugfs handler access past pmic_models
array.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200525164817.2938638-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Currently rpmh_invalidate() always returns success. Update its
return type to void.
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/1592485553-29163-1-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
rpmh-rsc driver is fairly core to system and should not be removable
once its probed. However it allows to unbind driver from sysfs using
below command which results into a crash on sc7180.
echo 18200000.rsc > /sys/bus/platform/drivers/rpmh/unbind
Lets prevent unbind at runtime by setting suppress_bind_attrs flag.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/1592808805-2437-1-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Export finalize function to client which helps append eoc and jump
command to pkt. Let client decide call finalize or not.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/1592749115-24158-9-git-send-email-dennis-yc.hsieh@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This should be returning PTR_ERR() but it returns IS_ERR() instead.
Fixes: ffdbae28d9 ("drivers: soc: xilinx: Use mailbox IPI callback")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20200605110020.GA978434@mwanda
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This introduces device managed versions of functions used to register
remoteproc devices, add support for remoteproc driver specific resource
control, enables remoteproc drivers to specify ELF class and machine for
coredumps. It integrates pm_runtime in the core for keeping resources
active while the remote is booted and holds a wake source while
recoverying a remote processor after a firmware crash.
It refactors the remoteproc device's allocation path to simplify the
logic, fix a few cleanup bugs and to not clone const strings onto the
heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a
zero-length array is replaced with flexible-array.
A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm
SM8250 gains support for audio, compute and sensor remoteprocs and the
Qualcomm SC7180 modem support is cleaned up and improved.
The Qualcomm glink subsystem-restart driver is merged into the main
glink driver, the Qualcomm sysmon driver is extended to properly notify
remote processors about all other remote processors' state transitions.
-----BEGIN PGP SIGNATURE-----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=4k54
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces device managed versions of functions used to register
remoteproc devices, add support for remoteproc driver specific
resource control, enables remoteproc drivers to specify ELF class and
machine for coredumps. It integrates pm_runtime in the core for
keeping resources active while the remote is booted and holds a wake
source while recoverying a remote processor after a firmware crash.
It refactors the remoteproc device's allocation path to simplify the
logic, fix a few cleanup bugs and to not clone const strings onto the
heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a
zero-length array is replaced with flexible-array.
A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm
SM8250 gains support for audio, compute and sensor remoteprocs and the
Qualcomm SC7180 modem support is cleaned up and improved.
The Qualcomm glink subsystem-restart driver is merged into the main
glink driver, the Qualcomm sysmon driver is extended to properly
notify remote processors about all other remote processors' state
transitions"
* tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits)
remoteproc: Fix an error code in devm_rproc_alloc()
MAINTAINERS: Add myself as reviewer for Ingenic rproc driver
remoteproc: ingenic: Added remoteproc driver
remoteproc: Add support for runtime PM
dt-bindings: Document JZ47xx VPU auxiliary processor
remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev()
remoteproc: Fix and restore the parenting hierarchy for vdev
remoteproc: Fall back to using parent memory pool if no dedicated available
remoteproc: Replace zero-length array with flexible-array
remoteproc: wcss: add support for rpmsg communication
remoteproc: core: Prevent system suspend during remoteproc recovery
remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function
remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use
remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space
dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs
remoteproc: qcom: pas: Add SM8250 PAS remoteprocs
dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs
remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region
dt-bindings: remoteproc: qcom: Use memory-region to reference memory
remoteproc: qcom: pas: Add SC7180 Modem support
...
Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzkHw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yldOwCgus/DgpnI1UL4z+NdBxJrAXtkPmgAn2sgTUea
i5RblCmcVMqvHaGtYkY+
=tScN
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...
* The remainder of the code necessary to support the Kendryte K210.
* Support for building device trees into the kernel, as the K210 doesn't
have a bootloader that provides one.
* A K210 device tree and the associated defconfig update.
* Support for skipping PMP initialization on systems that trap on PMP
accesses rather than treating them as WARL.
* Support for KGDB.
* Improvements to text patching.
* Some cleanups to the SiFive L2 cache driver.
I may have a second part, but I wanted to get this out earlier rather than
later as they've been ready to go for a while now.
-----BEGIN PGP SIGNATURE-----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=keTq
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.8-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The remainder of the code necessary to support the Kendryte K210:
* Support for building device trees into the kernel, as the K210
doesn't have a bootloader that provides one
* A K210 device tree and the associated defconfig update
* Support for skipping PMP initialization on systems that trap on
PMP accesses rather than treating them as WARL
- Support for KGDB
- Improvements to text patching
- Some cleanups to the SiFive L2 cache driver
* tag 'riscv-for-linus-5.8-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
soc: sifive: l2 cache: Mark l2_get_priv_group as static
soc: sifive: l2 cache: Eliminate an unsigned zero compare warning
riscv: Add support to determine no. of L2 cache way enabled
riscv: cacheinfo: Implement cache_get_priv_group with a generic ops structure
riscv: Use text_mutex instead of patch_lock
riscv: Use NOKPROBE_SYMBOL() instead of __krpobes annotation
riscv: Remove the 'riscv_' prefix of function name
riscv: Add SW single-step support for KDB
riscv: Use the XML target descriptions to report 3 system registers
riscv: Add KGDB support
kgdb: Add kgdb_has_hit_break function
RISC-V: Skip setting up PMPs on traps
riscv: K210: Update defconfig
riscv: K210: Add a built-in device tree
riscv: Allow device trees to be built into the kernel
These are updates to SoC specific drivers that did not have
another subsystem maintainer tree to go through for some
reason:
- Some bus and memory drivers for the MIPS P5600 based
Baikal-T1 SoC that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3,
Qualcomm MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas
RZ/G1H, and Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC
as a transport.
- Mediatek platforms now use a new driver for their "MMSYS"
hardware block that controls clocks and some other aspects
in behalf of the media and gpu drivers.
- Some Tegra processors have improved power management
support, including getting woken up by the PMIC and cluster
power down during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon,
Mediatek, and Tegra.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=44Jc
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM/SoC driver updates from Arnd Bergmann:
"These are updates to SoC specific drivers that did not have another
subsystem maintainer tree to go through for some reason:
- Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3, Qualcomm
MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC as a
transport.
- Mediatek platforms now use a new driver for their "MMSYS" hardware
block that controls clocks and some other aspects in behalf of the
media and gpu drivers.
- Some Tegra processors have improved power management support,
including getting woken up by the PMIC and cluster power down
during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
Tegra"
* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
clk: sprd: fix compile-testing
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
staging: tegra-video: fix V4L2 dependency
tee: fix crypto select
drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
soc: ti: add k3 platforms chipid module driver
dt-bindings: soc: ti: add binding for k3 platforms chipid module
...
One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already supported
in arch/arm64. The platform may also be extended to support running
32-bit kernels on those 64-bit chips for memory-constrained machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742,
an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally
released in 2016 as one of the last high-end 32-bit designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater effort
for the Android OS to have a common kernel binary for all platforms and
any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining.
All device drivers specific to those boards can now get removed as
well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl7XvmAACgkQmmx57+YA
GNk4vRAAs3TxlwLAUk5dknAi+UstlviNPG/ys6mViFuLqktPyhkA/v6nFOBI5Ldf
8xAsaSk3+oAX3Dd7aTaudl5WMFWFtzT5xA4gEI7CBZrBaAL0BVns1JfnVxpPRIcF
B09Sb3wv7++E/+AxYcoVLWd5wkc9tlMesrIV5FPHHasOp3rRjVI0cExXnXzqJU8M
TbwrWEOczZNVAm2q4Eh1ttbuSIvPd3s4NMnI755MRSQ7u/rYFSPf6Ay8/eFTqx1e
0SMWHRmrGeP6yhLy7+Li0x0jsK3ReZ9SkLXp3iEZ9huKbBTHIPBUeBB1RMnCYGe+
M2OL+9ySSe9UI9sjvsLGPDAnJaZI/UDUOVhatZCTvYB7CZY5nYNrYp+heYFONWm6
Up3e1t2iGPbgs8/1y78a9YPxAdsW0iavRtjVUYb+nwX+savYZgSBATA1pZqLc317
5FAGmTh//OLKYBSjfAxu9H8aInJPZA595lUiPHEQujzZH5Xz0QNtv4dapeNL2I4g
LO20PMvuEgmwlwj/Npnwdl0UQK3ztoeR2upCrk91VwtNWGiOWTzCMT/OkYAAjKuo
QYMGu3UvbbTCHPsIdrUz8gZ2T3VnJoeE3ldny2QbNAtVdpH/F8htJcilrBbyv1vI
IKB1oogf5zfUwXVwZRxCfI9s5hELUlAKMGTtNcybzdsKpN5xtTo=
=gzCp
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already
supported in arch/arm64. The platform may also be extended to support
running 32-bit kernels on those 64-bit chips for memory-constrained
machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or
R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
originally released in 2016 as one of the last high-end 32-bit
designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater
effort for the Android OS to have a common kernel binary for all
platforms and any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining. All
device drivers specific to those boards can now get removed as well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options"
* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
ARM: omap2: fix omap5_realtime_timer_init definition
ARM: zynq: Don't select CONFIG_ICST
ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
ARM: davinci: fix build failure without I2C
power: reset: vexpress: fix build issue
power: vexpress: cleanup: use builtin_platform_driver
power: vexpress: add suppress_bind_attrs to true
Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
MAINTAINERS: pxa: remove Compulab arm/pxa support
ARM: pxa: remove Compulab pxa2xx boards
bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
soc: imx: move cpu code to drivers/soc/imx
ARM: imx: move cpu definitions into a header
ARM: imx: use device_initcall for imx_soc_device_init
ARM: imx: pcm037: make pcm970_sja1000_platform_data static
bus: ti-sysc: Timers no longer need legacy quirk handling
ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
ARM: dts: Configure system timers for omap2
ARM: dts: Configure system timers for ti81xx
...
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in
the struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
* Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
* Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
* Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
* Fix wrong compatible binding in the qcom driver (Ansuel Smith).
* Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
* Add r8a7742 SoC support to the dt cpufreq driver (Lad Prabhakar).
- Update cpuidle core and drivers:
* Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
* Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
* Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver
and remove an unused local MSR definition from it (Jacob Pan,
Sumeet Pawnikar).
- Update devfreq core and drivers:
* Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
* Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
* Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei).
-----BEGIN PGP SIGNATURE-----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=APdj
-----END PGP SIGNATURE-----
Merge tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the system-wide PM driver flags, make runtime switching
of cpuidle governors easier, improve the user space hibernation
interface code, add intel-speed-select interface documentation, add
more debug messages to the ACPI code handling suspend to idle, update
the cpufreq core and drivers, fix a minor issue in the cpuidle core
and update two cpuidle drivers, improve the PM-runtime framework,
update the Intel RAPL power capping driver, update devfreq core and
drivers, and clean up the cpupower utility.
Specifics:
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in the
struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
- Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
- Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
- Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
- Fix wrong compatible binding in the qcom driver (Ansuel Smith).
- Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
- Add r8a7742 SoC support to the dt cpufreq driver (Lad
Prabhakar).
- Update cpuidle core and drivers:
- Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
- Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
- Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver and
remove an unused local MSR definition from it (Jacob Pan, Sumeet
Pawnikar).
- Update devfreq core and drivers:
- Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
- Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
- Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei)"
* tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits)
cpuidle: Fix three reference count leaks
PM: runtime: Replace pm_runtime_callbacks_present()
PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex
PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR
PM / devfreq: Replace strncpy with strscpy
PM / devfreq: imx: Register interconnect device
PM / devfreq: Add generic imx bus scaling driver
PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()
PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting
PM: hibernate: Restrict writes to the resume device
PM: runtime: clk: Fix clk_pm_runtime_get() error path
cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
ACPI: EC: PM: s2idle: Extend GPE dispatching debug message
ACPI: PM: s2idle: Print type of wakeup debug messages
powercap: RAPL: remove unused local MSR define
PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend()
Documentation: admin-guide: pm: Document intel-speed-select
PM: hibernate: Split off snapshot dev option
PM: hibernate: Incorporate concurrency handling
Documentation: ABI: make current_governer_ro as a candidate for removal
...
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
The kbuild test robot is firing a warning over a missing prototype. The
function can just be static.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Fix the following sparse warning:
drivers/soc/ti/knav_qmss_queue.c:412:23: warning: symbol 'knav_gp_range_ops' was not declared.
The knav_acc_firmwares has only call site within knav_qmss_queue.c
It should be static
Fixes: 41f93af900 ("soc: ti: add Keystone Navigator QMSS driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The Texas Instruments K3 Multicore SoC platforms have chipid module which
is represented by CTRLMMR_xxx_JTAGID register and contains information
about SoC id and revision.
Bits:
31-28 VARIANT Device variant
27-12 PARTNO Part number
11-1 MFG Indicates TI as manufacturer (0x17)
1 Always 1
This patch adds corresponding driver to identify the TI K3 SoC family and
revision, and registers this information with the SoC bus. It is available
under /sys/devices/soc0/ for user space, and can be checked, where needed,
in Kernel using soc_device_match().
Identification is done by:
- checking MFG to be TI ID
- retrieving Device variant (revision)
- retrieving Part number and convert it to the family
- retrieving machine from DT "/model"
Example J721E:
# cat /sys/devices/soc0/{machine,family,revision}
Texas Instruments K3 J721E SoC
J721E
SR1.0
Example AM65x:
# cat /sys/devices/soc0/{machine,family,revision}
Texas Instruments AM654 Base Board
AM65X
SR1.0
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The Qualcomm SPM cpuidle driver seems to be the last driver still
using the generic ARM CPUidle infrastructure.
Converting it actually allows us to simplify the driver,
and we end up being able to remove more lines than adding new ones:
- We can parse the CPUidle states in the device tree directly
with dt_idle_states (and don't need to duplicate that
functionality into the spm driver).
- Each "saw" device managed by the SPM driver now directly
registers its own cpuidle driver, removing the need for
any global (per cpu) state.
The device tree binding is the same, so the driver stays
compatible with all old device trees.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add soc device support for Vybrid/VF platform.
- Move the i.MX soc device registration code from mach-imx to
drivers/soc/imx for possible future consolidation with i.MX8 code.
- A small fixup to make pcm970_sja1000_platform_data static.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl7IflgUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5Tswf+Id6DM109IHuZxhPWNB5SKEkVa1cr
v7u7GeT/REqnsVCoFgC0kYIVlOj6nm7F8wwrHziiocvryUV8KPiENG3zMCVzJfLz
+xkZxIYEuMeLoJjWOz3HeR5bp8G5GeL8sGt2D5OrMh1EUHYTZdnf4/nESvCMJb41
rOaBRHuhhR1/Dv8qwCkXU9zep/jwlVXf+r6pC5pQNGmUpUGC2VFc7rDYkODS8Jo4
MfNx5S+HHk2Jabei+6fKEsVG1x7E3lv3ky/ZdVWhjtgy19I32E+o4Cr+UQqegIen
N4V/Uya6KejSvhaHDf6Pz2TjqTkXxlWSQ0Lu2I7pDMWdU5Upf0iLqbV1rQ==
=MC2F
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc
i.MX SoC changes for 5.8:
- Add soc device support for Vybrid/VF platform.
- Move the i.MX soc device registration code from mach-imx to
drivers/soc/imx for possible future consolidation with i.MX8 code.
- A small fixup to make pcm970_sja1000_platform_data static.
* tag 'imx-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: move cpu code to drivers/soc/imx
ARM: imx: move cpu definitions into a header
ARM: imx: use device_initcall for imx_soc_device_init
ARM: imx: pcm037: make pcm970_sja1000_platform_data static
ARM: vf610: report soc info via soc device
Link: https://lore.kernel.org/r/20200523032516.11016-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Optimize imx-scu driver to use one TX and one RX instead of four for
talking to SCU.
- Fix one possible message header corruption where the response is
longer than the request.
- Move System Control defines into dt-bindings header, so that DT can
use them as well.
- A couple of small fixups.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl7IeuUUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5CpAf/VV2krqXlgTXA1Ppl+ivdGkx9ntwo
dVtZYNr65Z1iqp6yujW7cH/qulXfkaFanwDptq9ulBkG6uiyV06GCtBxpp3VhNOB
60uaS8RsieYmCz3e8j4kZkMCBthpD72wt0DxF1TlJu2d/cWfsM4/bMbrx0qYiT0V
J5FqcGH0xbe+E5YITdoPQbNxEig49q2P6BhkNLQelVQtVgM0lwSpDX3WRpCizch4
bbKSVYudV/rGGPM7ZYM53N+ngwKZurRbIf7br1QgA4ZlQxdCtADB6IRd2RsfrC8P
4BizRONfh46ogrnb9/P951RZu9H7VFRkTurnXdU+NcFK8HPYDGQmm7P2SQ==
=cJwM
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.8:
- Optimize imx-scu driver to use one TX and one RX instead of four for
talking to SCU.
- Fix one possible message header corruption where the response is
longer than the request.
- Move System Control defines into dt-bindings header, so that DT can
use them as well.
- A couple of small fixups.
* tag 'imx-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: scu: Fix possible memory leak in imx_scu_probe()
dt-bindings: firmware: imx: Add more system controls and PM clock types
dt-bindings: firmware: imx: Move system control into dt-binding headfile
firmware: imx: scu: Fix corruption of header
firmware: imx-scu: Support one TX and one RX
soc: imx8m: No need to put node when of_find_compatible_node() failed
Link: https://lore.kernel.org/r/20200523032516.11016-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enables Tegra210, Tegra186 and Tegra194 to be woken from suspend by the
PMIC and exports a bit more information about SoCs via sysfs.
-----BEGIN PGP SIGNATURE-----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=EmGZ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.8-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.8-rc1
Enables Tegra210, Tegra186 and Tegra194 to be woken from suspend by the
PMIC and exports a bit more information about SoCs via sysfs.
* tag 'tegra-for-5.8-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Enable PMIC wake event on Tegra210
soc: tegra: Fix tegra_pmc_get_suspend_mode definition
soc/tegra: pmc: Enable PMIC wake event on Tegra194
soc/tegra: pmc: Select GENERIC_PINCONF
soc/tegra: fuse: Update the SoC revision attribute to display a name
soc/tegra: fuse: Trivial clean-up of tegra_init_revision()
soc/tegra: fuse: Add custom SoC attributes
soc/tegra: pmc: Enable PMIC wake event on Tegra186
Link: https://lore.kernel.org/r/20200522142846.2376224-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a large set of cleanups, bug fixes, general improvements
and documentation fixes for the RPMH driver. It adds a debugfs mechanism
for inspecting Command DB. Socinfo got the "soc_id" attribute defines
and definitions for a various variants of MSM8939.
RPMH, RPMPD and RPMHPD where made possible to build as modules, but RPMH
had to be reverted due to a compilation issue when tracing is enabled.
RPMHPD gained power-domains for the SM8250 voltage corners.
The SCM driver gained fixes for two build warnings and the SMP2P had an
unnecessary error print removed.
-----BEGIN PGP SIGNATURE-----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=tkhb
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.8
This contains a large set of cleanups, bug fixes, general improvements
and documentation fixes for the RPMH driver. It adds a debugfs mechanism
for inspecting Command DB. Socinfo got the "soc_id" attribute defines
and definitions for a various variants of MSM8939.
RPMH, RPMPD and RPMHPD where made possible to build as modules, but RPMH
had to be reverted due to a compilation issue when tracing is enabled.
RPMHPD gained power-domains for the SM8250 voltage corners.
The SCM driver gained fixes for two build warnings and the SMP2P had an
unnecessary error print removed.
* tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (42 commits)
Revert "soc: qcom: rpmh: Allow RPMH driver to be loaded as a module"
soc: qcom: rpmh-rsc: Remove the pm_lock
soc: qcom: rpmh-rsc: Simplify locking by eliminating the per-TCS lock
kernel/cpu_pm: Fix uninitted local in cpu_pm
soc: qcom: rpmh-rsc: We aren't notified of our own failure w/ NOTIFY_BAD
soc: qcom: rpmh-rsc: Correctly ignore CPU_CLUSTER_PM notifications
firmware: qcom_scm-legacy: Replace zero-length array with flexible-array
soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync()
soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation
soc: qcom: socinfo: add msm8936/39 and apq8036/39 soc ids
soc: qcom: aoss: Add SM8250 compatible
soc: qcom: pdr: Remove impossible error condition
soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner
soc: qcom: rpmhpd: Add SM8250 power domains
firmware: qcom_scm: fix bogous abuse of dma-direct internals
dt-bindings: soc: qcom: apr: Use generic node names for APR services
firmware: qcom_scm: Remove unneeded conversion to bool
soc: qcom: cmd-db: Properly endian swap the slv_id for debugfs
soc: qcom: cmd-db: Use 5 digits for printing address
soc: qcom: cmd-db: Cast sizeof() to int to silence field width warning
...
Link: https://lore.kernel.org/r/20200519052533.1250024-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- move clock driver to bind against the new mmsys driver
(mt2712, mt2701, mt8183, mt6797 and mt6779)
-----BEGIN PGP SIGNATURE-----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=NHav
-----END PGP SIGNATURE-----
Merge tag 'v5.7-next-soc.2' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
- make mmsys kconfig entry to depend on ARCH_MEDIATEK instead of a specific SoC
- move clock driver to bind against the new mmsys driver
(mt2712, mt2701, mt8183, mt6797 and mt6779)
* tag 'v5.7-next-soc.2' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
clk/soc: mediatek: mt6779: Bind clock driver from platform device
clk/soc: mediatek: mt6797: Bind clock driver from platform device
clk/soc: mediatek: mt8183: Bind clock driver from platform device
clk / soc: mediatek: Bind clock and gpu driver for mt2701
clk / soc: mediatek: Bind clock and gpu driver for mt2712
soc: mediatek: Enable mmsys driver by default if Mediatek arch is selected
Link: https://lore.kernel.org/r/d2eb19f4-589a-89c1-02ad-9f19a6cfb09a@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- support GX SoCs in the EE power-controller driver
-----BEGIN PGP SIGNATURE-----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=nn2j
-----END PGP SIGNATURE-----
Merge tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers
soc: amlogic: driver updates for v5.8
- support GX SoCs in the EE power-controller driver
* tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
soc: amlogic: meson-ee-pwrc: add support for the Meson GX SoCs
soc: amlogic: meson-ee-pwrc: add support for Meson8/Meson8b/Meson8m2
dt-bindings: power: meson-ee-pwrc: add support for the Meson GX SoCs
dt-bindings: power: meson-ee-pwrc: add support for Meson8/8b/8m2
Link: https://lore.kernel.org/r/5ec6f570.1c69fb81.a3753.711b@mx.google.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
the entry point for the DRM subsystem.
Replace clk-provider.h include with of_clk.h for mach-mediatek
-----BEGIN PGP SIGNATURE-----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=v4ft
-----END PGP SIGNATURE-----
Merge tag 'v5.7-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
Refactor the mmsys to reflect that it's a clock driver and
the entry point for the DRM subsystem.
Replace clk-provider.h include with of_clk.h for mach-mediatek
* tag 'v5.7-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
ARM: mediatek: Replace <linux/clk-provider.h> by <linux/of_clk.h>
soc: mediatek: Missing platform_device_unregister() on error in mtk_mmsys_probe()
soc: mediatek: mmsys: Drop <linux/clk-provider.h>
soc / drm: mediatek: Fix mediatek-drm device probing
soc / drm: mediatek: Move routing control to mmsys device
clk / soc: mediatek: Move mt8173 MMSYS to platform driver
dt-bindings: mediatek: Update mmsys binding to reflect it is a system controller
drm/mediatek: Omit warning on probe defers
Link: https://lore.kernel.org/r/2cf27d33-59c6-023b-9993-57a2639824ea@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add the main config option for the RZ/G1H SoC.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXr5iKwAKCRCKwlD9ZEnx
cOcgAP9ObpixgX8691owiacKYWJ8q4ctWxknOv3DUrrVrRzywAEAl10PigLtM6Ey
Ac7B16wsmoodqROoywXmubylSZ0QWwI=
=dZjq
-----END PGP SIGNATURE-----
Merge tag 'renesas-drivers-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.8 (take two)
- Add the main config option for the RZ/G1H SoC.
* tag 'renesas-drivers-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Add Renesas R8A7742 config option
Link: https://lore.kernel.org/r/20200515100547.14671-5-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add System Controller (SYSC) and Reset (RST) support for the new
RZ/G1H (R8A7742) SoC.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXqqGEwAKCRCKwlD9ZEnx
cDAZAP4/OLTCsBaYbGFWDMCFFBv3RpxcErDEsSJSp1kwbaQR0gEA9BOK28AvxgwE
hWQ4Zg0hIh18VuhVFyXlL6IrcqonSgk=
=SU1w
-----END PGP SIGNATURE-----
Merge tag 'renesas-drivers-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.8
- Add System Controller (SYSC) and Reset (RST) support for the new
RZ/G1H (R8A7742) SoC.
* tag 'renesas-drivers-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: rcar-rst: Add support for RZ/G1H
soc: renesas: rcar-sysc: Add R8A7742 support
clk: renesas: Add r8a7742 CPG Core Clock Definitions
dt-bindings: power: rcar-sysc: Add r8a7742 power domain index macros
Link: https://lore.kernel.org/r/20200430084849.1457-5-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There's no callers in-tree anymore since commit
3b2abda7d2 ("soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
There is a statement that not indented correctly, remove the
extraneous space.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Use the cpu affine DPIO unless there isn't one which can happen
if less DPIOs than cores are assign to the kernel.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The current codebase makes use of one-element arrays in the following
form:
struct something {
int length;
u8 data[1];
};
struct something *instance;
instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);
but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.
Also, make use of the new struct_size() helper to properly calculate the
size of struct qe_firmware.
This issue was found with the help of Coccinelle and, audited and fixed
_manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The PMIC wake event can be used to bring the system out of suspend based
on certain events happening on the PMIC (such as an RTC alarm).
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In order to determine the number of L2 cache ways enabled at runtime,
implement a private attribute ("number_of_ways_enabled"). Reading this
attribute returns the number of enabled L2 cache ways at runtime.
Using riscv_set_cacheinfo_ops() hook a custom function, that returns
this private attribute, to the generic ops structure which is used by
cache_get_priv_group() in cacheinfo framework.
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Move the soc device register code to drivers/soc/imx to align with
i.MX8.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
