If we do
% echo 1 > /sys/module/dmatest/parameters/run
[ 115.851124] dmatest: Could not start test, no channels configured
% echo dma8chan7 > /sys/module/dmatest/parameters/channel
[ 127.563872] dmatest: Added 1 threads using dma8chan7
% cat /sys/module/dmatest/parameters/wait
... !!! HANG !!! ...
The culprit is the commit 6138f967bc
("dmaengine: dmatest: Use fixed point div to calculate iops")
which makes threads not to run, but pending and being kicked off by writing
to the 'run' node. However, it forgot to consider 'wait' routine to avoid
above mentioned case.
In order to fix this, check for really running threads, i.e. with pending
and done flags unset.
It's pity the culprit commit hadn't updated documentation and tested all
possible scenarios.
Fixes: 6138f967bc ("dmaengine: dmatest: Use fixed point div to calculate iops")
Cc: Seraj Alijan <seraj.alijan@sondrel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200428113518.70620-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Under some circumstances, i.e. when test is still running and about to
time out and user runs, for example,
grep -H . /sys/module/dmatest/parameters/*
the iterations parameter is not respected and test is going on and on until
user gives
echo 0 > /sys/module/dmatest/parameters/run
This is not what expected.
The history of this bug is interesting. I though that the commit
2d88ce76eb ("dmatest: add a 'wait' parameter")
is a culprit, but looking closer to the code I think it simple revealed the
broken logic from the day one, i.e. in the commit
0a2ff57d6f ("dmaengine: dmatest: add a maximum number of test iterations")
which adds iterations parameter.
So, to the point, the conditional of checking the thread to be stopped being
first part of conjunction logic prevents to check iterations. Thus, we have to
always check both conditions to be able to stop after given iterations.
Since it wasn't visible before second commit appeared, I add a respective
Fixes tag.
Fixes: 2d88ce76eb ("dmatest: add a 'wait' parameter")
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20200424161147.16895-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DMA synchronization hook checks whether interrupt is raised by testing
corresponding bit in a hardware status register, and thus, clock should
be enabled in this case, otherwise CPU may hang if synchronization is
invoked while Runtime PM is in suspended state. This patch resumes the RPM
during of the DMA synchronization process in order to avoid potential
problems. It is a minor clean up of a previous commit, no real problem is
fixed by this patch because currently RPM is always in a resumed state
while DMA is synchronized, although this may change in the future.
Fixes: 6697255f23 ("dmaengine: tegra-apb: Improve DMA synchronization")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200426190835.21950-1-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When the channel register code was changed to allow hotplug operations,
dynamic indexing wasn't taken into account. When channels are randomly
plugged and unplugged out of order, the serial indexing breaks. Convert
channel indexing to using IDA tracking in order to allow dynamic
assignment. The previous code does not cause any regression bug for
existing channel allocation besides idxd driver since the hotplug usage
case is only used by idxd at this point.
With this change, the chan->idr_ref is also not needed any longer. We can
have a device with no channels registered due to hot plug. The channel
device release code no longer should attempt to free the dma device id on
the last channel release.
Fixes: e81274cd6b ("dmaengine: add support to dynamic register/unregister of channels")
Reported-by: Yixin Zhang <yixin.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Yixin Zhang <yixin.zhang@intel.com>
Link: https://lore.kernel.org/r/158679961260.7674.8485924270472851852.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When a channel configuration fails, the status of the channel is set to
DEV_ERROR so that an attempt to submit it fails. However, this status
sticks until the heat end of the universe, making it impossible to
recover from the error.
Let's reset it when the channel is released so that further use of the
channel with correct configuration is not impacted.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200419164912.670973-5-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
With an invalid dma_slave_config set previously,
mmp_tdma_prep_dma_cyclic() would detect an error whilst configuring the
channel, but proceed happily on:
[ 120.756530] mmp-tdma d42a0800.adma: mmp_tdma: unknown burst size.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200419164912.670973-2-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pd->dma.dev is read in irq handler pd_irq().
However, it is set to pdev->dev after request_irq().
Therefore, set pd->dma.dev to pdev->dev before request_irq() to
avoid data race between pch_dma_probe() and pd_irq().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200416062335.29223-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DMA transfer might finish just after checking the state with
dma_cookie_status, but before the lock is acquired. Not checking
for an empty list in xilinx_dma_tx_status may result in reading
random data or data corruption when desc is written to. This can
be reliably triggered by using dma_sync_wait to wait for DMA
completion.
Signed-off-by: Sebastian von Ohr <vonohr@smaract.com>
Tested-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/20200303130518.333-1-vonohr@smaract.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If PCI_MSI is not set, building fais:
drivers/dma/hisi_dma.c: In function ‘hisi_dma_free_irq_vectors’:
drivers/dma/hisi_dma.c:138:2: error: implicit declaration of function ‘pci_free_irq_vectors’;
did you mean ‘pci_alloc_irq_vectors’? [-Werror=implicit-function-declaration]
pci_free_irq_vectors(data);
^~~~~~~~~~~~~~~~~~~~
Make HISI_DMA depends on PCI_MSI to fix this.
Fixes: e9f08b6525 ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200328114133.17560-1-yuehaibing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- Core:
- Some code cleanup and optimization in core by Andy
- Debugfs support for displaying dmaengine channels by Peter
- Drivers:
- New driver for uniphier-xdmac controller
- Updates to stm32 dma, mdma and dmamux drivers and PM support
- More updates to idxd drivers
- Bunch of changes in tegra-apb driver and cleaning up of pm functions
- Bunch of spelling fixes and Replace zero-length array patches
- Shutdown hook for fsl-dpaa2-qdma driver
- Support for interleaved transfers for ti-edma and virtualization
support for k3-dma driver
- Support for reset and updates in xilinx_dma driver
- Improvements and locking updates in at_hdma driver
-----BEGIN PGP SIGNATURE-----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=+UJ7
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"Core:
- Some code cleanup and optimization in core by Andy
- Debugfs support for displaying dmaengine channels by Peter
Drivers:
- New driver for uniphier-xdmac controller
- Updates to stm32 dma, mdma and dmamux drivers and PM support
- More updates to idxd drivers
- Bunch of changes in tegra-apb driver and cleaning up of pm
functions
- Bunch of spelling fixes and Replace zero-length array patches
- Shutdown hook for fsl-dpaa2-qdma driver
- Support for interleaved transfers for ti-edma and virtualization
support for k3-dma driver
- Support for reset and updates in xilinx_dma driver
- Improvements and locking updates in at_hdma driver"
* tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits)
dt-bindings: dma: renesas,usb-dmac: add r8a77961 support
dmaengine: uniphier-xdmac: Remove redandant error log for platform_get_irq
dmaengine: tegra-apb: Improve DMA synchronization
dmaengine: tegra-apb: Don't save/restore IRQ flags in interrupt handler
dmaengine: tegra-apb: mark PM functions as __maybe_unused
dmaengine: fix spelling mistake "exceds" -> "exceeds"
dmaengine: sprd: Set request pending flag when DMA controller is active
dmaengine: ppc4xx: Use scnprintf() for avoiding potential buffer overflow
dmaengine: idxd: remove global token limit check
dmaengine: idxd: reflect shadow copy of traffic class programming
dmaengine: idxd: Merge definition of dsa_batch_desc into dsa_hw_desc
dmaengine: Create debug directories for DMA devices
dmaengine: ti: k3-udma: Implement custom dbg_summary_show for debugfs
dmaengine: Add basic debugfs support
dmaengine: fsl-dpaa2-qdma: remove set but not used variable 'dpaa2_qdma'
dmaengine: ti: edma: fix null dereference because of a typo in pointer name
dmaengine: fsl-dpaa2-qdma: Adding shutdown hook
dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver
dt-bindings: dmaengine: Add UniPhier external DMA controller bindings
dmaengine: ti: k3-udma: Implement support for atype (for virtualization)
...
platform_get_irq prints the error on failure, so there is no need to
have caller add a log.
Remove the log in uniphier_xdmac_probe() for platform_get_irq() failure
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200323171928.424223-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Boot CPU0 always handles DMA interrupts and under some rare circumstances
it could stuck in uninterruptible state for a significant time (like in a
case of KASAN + NFS root). In this case sibling CPU, which waits for DMA
transfer completion, will get a DMA transfer timeout. In order to handle
this rare condition, interrupt status needs to be polled until interrupt
is handled.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200319212321.3297-2-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The interrupt is already disabled while interrupt handler is running, and
thus, there is no need to save/restore the IRQ flags within the spinlock.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200319212321.3297-1-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When CONFIG_PM is disabled, gcc warning this:
drivers/dma/tegra20-apb-dma.c:1587:12: warning: 'tegra_dma_runtime_resume' defined but not used [-Wunused-function]
drivers/dma/tegra20-apb-dma.c:1578:12: warning: 'tegra_dma_runtime_suspend' defined but not used [-Wunused-function]
Make it as __maybe_unused to fix the warnings,
also remove unneeded function declarations.
Fixes: ec8a158678 ("dma: tegra: add dmaengine based dma driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200320071337.59756-1-yuehaibing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
All but one error handling paths in the 'k3_udma_glue_cfg_rx_flow()'
function 'goto err' and call 'k3_udma_glue_release_rx_flow()'.
This not correct because this function has a 'channel->flows_ready--;' at
the end, but 'flows_ready' has not been incremented here, when we branch to
the error handling path.
In order to keep a correct value in 'flows_ready', un-roll
'k3_udma_glue_release_rx_flow()', simplify it, add some labels and branch
at the correct places when an error is detected.
Doing so, we also NULLify 'flow->udma_rflow' in a path that was lacking it.
Fixes: d702419134 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine user")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200318191209.1267-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On new Spreadtrum platforms, when the CPU enters idle, it will close
the DMA controllers' clock to save power if the DMA controller is not
busy. Moreover the DMA controller's busy signal depends on the DMA
enable flag and the request pending flag.
When DMA controller starts to transfer data, which means we already
set the DMA enable flag, but now we should also set the request pending
flag, in case the DMA clock will be closed accidentally if the CPU
can not detect the DMA controller's busy signal.
Signed-off-by: Zhenfang Wang <zhenfang.wang@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/02adbe4364ec436ec2c5bc8fd2386bab98edd884.1584019223.git.baolin.wang7@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The refcount check for dedicated workqueue (dwq) is off by one and allows
more than 1 user to open the char device. Fix check so only a single user
can open the device.
Fixes: 42d279f913 ("dmaengine: idxd: add char driver to expose submission portal to userland")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158403020187.10208.14117394394540710774.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200311071606.4485-1-tiwai@suse.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The global token_limit is not tied to group tokens_reserved and
tokens_allowed parameters. Remove the check in order to allow independent
configuration.
Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Reported-by: Yixin Zhang <yixin.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158386266911.11066.7545764533072221536.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The traffic class are set to -1 at initialization until the user programs
them. If the user choose not to, the driver will program appropriate
defaults. The driver also needs to update the shadowed copies of the values
after doing the programming.
Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Reported-by: Yixin Zhang <yixin.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158386263076.10898.4586509576813094559.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Create a placeholder directory for each registered DMA device.
DMA drivers can use the dmaengine_get_debugfs_root() call to get their
debugfs root and can populate with custom files to aim debugging.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200306142839.17910-4-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Via the /sys/kernel/debug/dmaengine/summary users can get information
about the DMA devices and the used channels.
Example output on am654-evm with audio using two channels and after running
dmatest on 4 channels:
dma0 (285c0000.dma-controller): number of channels: 96
dma1 (31150000.dma-controller): number of channels: 267
dma1chan0 | 2b00000.mcasp:tx
dma1chan1 | 2b00000.mcasp:rx
dma1chan2 | in-use
dma1chan3 | in-use
dma1chan4 | in-use
dma1chan5 | in-use
For slave channels we can show the device and the channel name a given
channel is requested.
For non slave devices the only information we know is that the channel is
in use.
DMA drivers can implement the optional dbg_summary_show callback to
provide controller specific information instead of the generic one.
It is easy to extend the generic dmaengine_summary_show() to print
additional information about the used channels.
I have taken the idea from gpiolib and clk subsystems.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200306142839.17910-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Dmaengine core warns the drivers registering for missing .device_release
implementation. The warning is accurate for dmaengine controllers which
hotplug but not for rest.
So reduce this to a debug log.
Link: https://lore.kernel.org/r/20200306135018.2286959-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c: In function dpaa2_qdma_shutdown:
drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c:795:28: warning: variable dpaa2_qdma set but not used [-Wunused-but-set-variable]
commit 3e0ca3c38d ("dmaengine: fsl-dpaa2-qdma: Adding shutdown hook")
involved this, remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200303131347.28392-1-yuehaibing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently there is a dereference of the null pointer m_ddev. This appears
to be a typo on the pointer, I believe s_ddev should be used instead.
Fix this by using the correct pointer.
Fixes: eb0249d501 ("dmaengine: ti: edma: Support for interleaved mem to mem transfer")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Addresses-Coverity: ("Explicit null dereferenced")
Link: https://lore.kernel.org/r/20200226185921.351693-1-colin.king@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We need to ensure DMA engine could be stopped in order for kexec
to start the next kernel.
So add the shutdown operation support.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Link: https://lore.kernel.org/r/20200227042841.18358-1-peng.ma@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This adds external DMA controller driver implemented in Socionext
UniPhier SoCs. This driver supports DMA_MEMCPY and DMA_SLAVE modes.
Since this driver does not support the the way to transfer size
unaligned to burst width, 'src_maxburst' or 'dst_maxburst' of
dma_slave_config must be 1 to transfer arbitrary size. If transfer
size is unaligned to burst size, the transfer isn't started and
the driver displays an error message.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1582271550-3403-3-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DT for virtualized hosts have dma-cells == 2 where the second parameter
is the ATYPE for the channel.
In case of dma-cells == 1 we can configure the ATYPE as 0 (reset value).
The ATYPE defined for j721e are:
0: pointers are physical addresses (no translation)
1: pointers are intermediate addresses (PVU)
2: pointers are virtual addresses (SMMU)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200218143126.11361-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The returned result from the check_vma() function in the cdev ->mmap() call
needs to be handled. Add the check and returning error.
Fixes: 42d279f913 ("dmaengine: idxd: add char driver to expose submission portal to userland")
Reported-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158264926659.9387.14325163515683047959.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On i.MX6UL/ULL and i.MX6SX the DMA event id for the RX channel of
UART6 is '0'. To fix the broken DMA support for UART6, we change
the check for event_id0 to include '0' as a valid id.
Fixes: 1ec1e82f25 ("dmaengine: Add Freescale i.MX SDMA support")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200225082139.7646-1-frieder.schrempf@kontron.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Technically it is possible that DMA could be misconfigured in a way that
cyclic DMA transfer is processed slower than it takes to complete the
cycle and in this case the DMA is getting aborted with a not very
informative message about the problem, let's improve it.
Suggested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200209163356.6439-20-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is nothing arch-specific in the driver's code, so let's enable
compile-testing for the driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200209163356.6439-18-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tegra APB DMA driver is an Open Firmware driver, so it uses OF alias
naming scheme which overrides MODULE_ALIAS, meaning that MODULE_ALIAS
does nothing and could be removed safely.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200209163356.6439-17-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver's removal was fixed by a recent commit and module load/unload
is working well now, tested on Tegra30.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200209163356.6439-16-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DMA controller shall be released on driver's removal.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200209163356.6439-15-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It is enough to check whether hardware is busy on suspend and to reset
it across of suspend-resume because:
1. Channel's configuration is fully re-programmed on each DMA
transfer anyways.
2. Context save-restore of an active channel won't end up well without
pausing transfer prior to the context's saving, but note that every
channel shall be idling at the time of suspend, so save-restore is
not needed at all.
3. The only case where context save-restore may be useful is when
channel is in a paused state during suspend. But channel's pausing
could be supported only on Tegra114+ and this functionality wasn't
implemented by the driver for years now because there is no need for
it in upstream kernel.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200209163356.6439-14-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It's a bit impractical to enable hardware's clock at the time of DMA
channel's allocation because most of DMA client drivers allocate DMA
channel at the time of the driver's probing, and thus, DMA clock is kept
always-enabled in practice, defeating the whole purpose of runtime PM.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200209163356.6439-13-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are few place in the code which check whether pending_sg_req list is
empty despite of the check already being done. Let's remove the duplicated
checks to keep code clean.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200209163356.6439-12-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The runtime PM is always available on all Tegra SoCs since the commit
40b2bb1b13 ("ARM: tegra: enforce PM requirement"), so there is no
need to handle the case of unavailable RPM in the code anymore.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200209163356.6439-11-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is no need to re-initialize the already initialized variables.
The tdc->config_init=false after driver's probe and after channel's
freeing, so there is no need to re-initialize it on the channel's
allocation.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200209163356.6439-10-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch fixes few dozens of coding style problems reported by
checkpatch and prettifies code where makes sense.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200209163356.6439-9-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is no need to kill tasklet when driver's probe fails because tasklet
can't be scheduled at this time. It is also cleaner to kill tasklet on
channel's freeing rather than to kill it on driver's removal, otherwise
tasklet could perform a dummy execution after channel's releasing, which
isn't very nice.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200209163356.6439-6-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
