Need to happen before we allocate and then leak the xefi. Found by
coverity via an xfsprogs libxfs scan.
[djwong: This also fixes the type of the @agbno argument.]
Fixes: 7dfee17b13 ("xfs: validate block number being freed before adding to xefi")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The AGF verifier does not check that the AGF length field is within
known good bounds. This has never been checked by runtime kernel
code (i.e. the lack of verification goes back to 1993) yet we assume
in many places that it is correct and verify other metdata against
it.
Add length verification to the AGF verifier. The length of the AGF
must be equal to the size of the AG specified in the superblock,
unless it is the last AG in the filesystem. In that case, it must be
less than or equal to sb->sb_agblocks and greater than
XFS_MIN_AG_BLOCKS, which is the smallest AG a growfs operation will
allow to exist.
This requires a bit of rework of the verifier function. We want to
verify metadata before we use it to verify other metadata. Hence
we need to verify the AGF sequence numbers before using them to
verify the length of the AGF. Then we can verify the AGF length
before we verify AGFL fields. Then we can verifier other fields that
are bounds limited by the AGF length.
And, finally, by calculating agf_length only once into a local
variable, we can collapse repeated "if (xfs_has_foo() &&"
conditionaly checks into single checks. This makes the code much
easier to follow as all the checks for a given feature are obviously
in the same place.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
If the journal geometry results in a sector or log stripe unit
validation problem, it indicates that we cannot set the log up to
safely write to the the journal. In these cases, we must abort the
mount because the corruption needs external intervention to resolve.
Similarly, a journal that is too large cannot be written to safely,
either, so we shouldn't allow those geometries to mount, either.
If the log is too small, we risk having transaction reservations
overruning the available log space and the system hanging waiting
for space it can never provide. This is purely a runtime hang issue,
not a corruption issue as per the first cases listed above. We abort
mounts of the log is too small for V5 filesystems, but we must allow
v4 filesystems to mount because, historically, there was no log size
validity checking and so some systems may still be out there with
undersized logs.
The problem is that on V4 filesystems, when we discover a log
geometry problem, we skip all the remaining checks and then allow
the log to continue mounting. This mean that if one of the log size
checks fails, we skip the log stripe unit check. i.e. we allow the
mount because a "non-fatal" geometry is violated, and then fail to
check the hard fail geometries that should fail the mount.
Move all these fatal checks to the superblock verifier, and add a
new check for the two log sector size geometry variables having the
same values. This will prevent any attempt to mount a log that has
invalid or inconsistent geometries long before we attempt to mount
the log.
However, for the minimum log size checks, we can only do that once
we've setup up the log and calculated all the iclog sizes and
roundoffs. Hence this needs to remain in the log mount code after
the log has been initialised. It is also the only case where we
should allow a v4 filesystem to continue running, so leave that
handling in place, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
If the current transaction holds a busy extent and we are trying to
allocate a new extent to fix up the free list, we can deadlock if
the AG is entirely empty except for the busy extent held by the
transaction.
This can occur at runtime processing an XEFI with multiple extents
in this path:
__schedule+0x22f at ffffffff81f75e8f
schedule+0x46 at ffffffff81f76366
xfs_extent_busy_flush+0x69 at ffffffff81477d99
xfs_alloc_ag_vextent_size+0x16a at ffffffff8141711a
xfs_alloc_ag_vextent+0x19b at ffffffff81417edb
xfs_alloc_fix_freelist+0x22f at ffffffff8141896f
xfs_free_extent_fix_freelist+0x6a at ffffffff8141939a
__xfs_free_extent+0x99 at ffffffff81419499
xfs_trans_free_extent+0x3e at ffffffff814a6fee
xfs_extent_free_finish_item+0x24 at ffffffff814a70d4
xfs_defer_finish_noroll+0x1f7 at ffffffff81441407
xfs_defer_finish+0x11 at ffffffff814417e1
xfs_itruncate_extents_flags+0x13d at ffffffff8148b7dd
xfs_inactive_truncate+0xb9 at ffffffff8148bb89
xfs_inactive+0x227 at ffffffff8148c4f7
xfs_fs_destroy_inode+0xb8 at ffffffff81496898
destroy_inode+0x3b at ffffffff8127d2ab
do_unlinkat+0x1d1 at ffffffff81270df1
do_syscall_64+0x40 at ffffffff81f6b5f0
entry_SYSCALL_64_after_hwframe+0x44 at ffffffff8200007c
This can also happen in log recovery when processing an EFI
with multiple extents through this path:
context_switch() kernel/sched/core.c:3881
__schedule() kernel/sched/core.c:5111
schedule() kernel/sched/core.c:5186
xfs_extent_busy_flush() fs/xfs/xfs_extent_busy.c:598
xfs_alloc_ag_vextent_size() fs/xfs/libxfs/xfs_alloc.c:1641
xfs_alloc_ag_vextent() fs/xfs/libxfs/xfs_alloc.c:828
xfs_alloc_fix_freelist() fs/xfs/libxfs/xfs_alloc.c:2362
xfs_free_extent_fix_freelist() fs/xfs/libxfs/xfs_alloc.c:3029
__xfs_free_extent() fs/xfs/libxfs/xfs_alloc.c:3067
xfs_trans_free_extent() fs/xfs/xfs_extfree_item.c:370
xfs_efi_recover() fs/xfs/xfs_extfree_item.c:626
xlog_recover_process_efi() fs/xfs/xfs_log_recover.c:4605
xlog_recover_process_intents() fs/xfs/xfs_log_recover.c:4893
xlog_recover_finish() fs/xfs/xfs_log_recover.c:5824
xfs_log_mount_finish() fs/xfs/xfs_log.c:764
xfs_mountfs() fs/xfs/xfs_mount.c:978
xfs_fs_fill_super() fs/xfs/xfs_super.c:1908
mount_bdev() fs/super.c:1417
xfs_fs_mount() fs/xfs/xfs_super.c:1985
legacy_get_tree() fs/fs_context.c:647
vfs_get_tree() fs/super.c:1547
do_new_mount() fs/namespace.c:2843
do_mount() fs/namespace.c:3163
ksys_mount() fs/namespace.c:3372
__do_sys_mount() fs/namespace.c:3386
__se_sys_mount() fs/namespace.c:3383
__x64_sys_mount() fs/namespace.c:3383
do_syscall_64() arch/x86/entry/common.c:296
entry_SYSCALL_64() arch/x86/entry/entry_64.S:180
To avoid this deadlock, we should not block in
xfs_extent_busy_flush() if we hold a busy extent in the current
transaction.
Now that the EFI processing code can handle requeuing a partially
completed EFI, we can detect this situation in
xfs_extent_busy_flush() and return -EAGAIN rather than going to
sleep forever. The -EAGAIN get propagated back out to the
xfs_trans_free_extent() context, where the EFD is populated and the
transaction is rolled, thereby moving the busy extents into the CIL.
At this point, we can retry the extent free operation again with a
clean transaction. If we hit the same "all free extents are busy"
situation when trying to fix up the free list, we can safely call
xfs_extent_busy_flush() and wait for the busy extents to resolve
and wake us. At this point, the allocation search can make progress
again and we can fix up the free list.
This deadlock was first reported by Chandan in mid-2021, but I
couldn't make myself understood during review, and didn't have time
to fix it myself.
It was reported again in March 2023, and again I have found myself
unable to explain the complexities of the solution needed during
review.
As such, I don't have hours more time to waste trying to get the
fix written the way it needs to be written, so I'm just doing it
myself. This patchset is largely based on Wengang Wang's last patch,
but with all the unnecessary stuff removed, split up into multiple
patches and cleaned up somewhat.
Reported-by: Chandan Babu R <chandanrlinux@gmail.com>
Reported-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Extent freeing neeeds to be able to avoid a busy extent deadlock
when the transaction itself holds the only busy extents in the
allocation group. This may occur if we have an EFI that contains
multiple extents to be freed, and the freeing the second intent
requires the space the first extent free released to expand the
AGFL. If we block on the busy extent at this point, we deadlock.
We hold a dirty transaction that contains a entire atomic extent
free operations within it, so if we can abort the extent free
operation and commit the progress that we've made, the busy extent
can be resolved by a log force. Hence we can restart the aborted
extent free with a new transaction and continue to make
progress without risking deadlocks.
To enable this, we need the EFI processing code to be able to handle
an -EAGAIN error to tell it to commit the current transaction and
retry again. This mechanism is already built into the defer ops
processing (used bythe refcount btree modification intents), so
there's relatively little handling we need to add to the EFI code to
enable this.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
To avoid blocking in xfs_extent_busy_flush() when freeing extents
and the only busy extents are held by the current transaction, we
need to pass the XFS_ALLOC_FLAG_FREEING flag context all the way
into xfs_extent_busy_flush().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Btrees that aren't freespace management trees use the normal extent
allocation and freeing routines for their blocks. Hence when a btree
block is freed, a direct call to xfs_free_extent() is made and the
extent is immediately freed. This puts the entire free space
management btrees under this path, so we are stacking btrees on
btrees in the call stack. The inobt, finobt and refcount btrees
all do this.
However, the bmap btree does not do this - it calls
xfs_free_extent_later() to defer the extent free operation via an
XEFI and hence it gets processed in deferred operation processing
during the commit of the primary transaction (i.e. via intent
chaining).
We need to change xfs_free_extent() to behave in a non-blocking
manner so that we can avoid deadlocks with busy extents near ENOSPC
in transactions that free multiple extents. Inserting or removing a
record from a btree can cause a multi-level tree merge operation and
that will free multiple blocks from the btree in a single
transaction. i.e. we can call xfs_free_extent() multiple times, and
hence the btree manipulation transaction is vulnerable to this busy
extent deadlock vector.
To fix this, convert all the remaining callers of xfs_free_extent()
to use xfs_free_extent_later() to queue XEFIs and hence defer
processing of the extent frees to a context that can be safely
restarted if a deadlock condition is detected.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
XFS has strict metadata ordering requirements. One of the things it
does is maintain the commit order of items from transaction commit
through the CIL and into the AIL. That is, if a transaction logs
item A before item B in a modification, then they will be inserted
into the CIL in the order {A, B}. These items are then written into
the iclog during checkpointing in the order {A, B}. When the
checkpoint commits, they are supposed to be inserted into the AIL in
the order {A, B}, and when they are pushed from the AIL, they are
pushed in the order {A, B}.
If we crash, log recovery then replays the two items from the
checkpoint in the order {A, B}, resulting in the objects the items
apply to being queued for writeback at the end of the checkpoint
in the order {A, B}. This means recovery behaves the same way as the
runtime code.
In places, we have subtle dependencies on this ordering being
maintained. One of this place is performing intent recovery from the
log. It assumes that recovering an intent will result in a
non-intent object being the first thing that is modified in the
recovery transaction, and so when the transaction commits and the
journal flushes, the first object inserted into the AIL beyond the
intent recovery range will be a non-intent item. It uses the
transistion from intent items to non-intent items to stop the
recovery pass.
A recent log recovery issue indicated that an intent was appearing
as the first item in the AIL beyond the recovery range, hence
breaking the end of recovery detection that exists.
Tracing indicated insertion of the items into the AIL was apparently
occurring in the right order (the intent was last in the commit item
list), but the intent was appearing first in the AIL. IOWs, the
order of items in the AIL was {D,C,B,A}, not {A,B,C,D}, and bulk
insertion was reversing the order of the items in the batch of items
being inserted.
Lucky for us, all the items fed to bulk insertion have the same LSN,
so the reversal of order does not affect the log head/tail tracking
that is based on the contents of the AIL. It only impacts on code
that has implicit, subtle dependencies on object order, and AFAICT
only the intent recovery loop is impacted by it.
Make sure bulk AIL insertion does not reorder items incorrectly.
Fixes: 0e57f6a36f ("xfs: bulk AIL insertion during transaction commit")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Pointers drop_leaf and save_leaf are initialized with values that are never
read, they are being re-assigned later on just before they are used. Remove
the redundant early initializations and keep the later assignments at the
point where they are used. Cleans up two clang scan build warnings:
fs/xfs/libxfs/xfs_attr_leaf.c:2288:29: warning: Value stored to 'drop_leaf'
during its initialization is never read [deadcode.DeadStores]
fs/xfs/libxfs/xfs_attr_leaf.c:2289:29: warning: Value stored to 'save_leaf'
during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The return value type of i_blocksize() is 'unsigned int', so the
type of blocksize has been modified from 'int' to 'unsigned int'
to ensure data type consistency.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
It is perfectly valid to not find session not found errors
when a reconnect of a session happens when requests for the
same session are happening in parallel.
We had these log messages as VFS logs. My last change dumped
these logs as FYI logs.
This change just creates a new dynamic tracepoint to capture
events of this type, just in case it is useful while
debugging issues in the future.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We do not log the session id in crypt_setup when a matching
session is not found. Printing the session id helps debugging
here. This change does just that.
This change also changes this log to FYI, since it is normal to
see then during a reconnect. Doing the same for a similar log
in case of signed connections.
The plan is to have a tracepoint for this event, so that we will
be able to see this event if need be. That will be done as
another change.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
clang warns about a possible field overflow in a memcpy:
In file included from fs/smb/server/smb_common.c:7:
include/linux/fortify-string.h:583:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
__write_overflow_field(p_size_field, size);
It appears to interpret the "&out[baselen + 4]" as referring to a single
byte of the character array, while the equivalen "out + baselen + 4" is
seen as an offset into the array.
I don't see that kind of warning elsewhere, so just go with the simple
rework.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This modifies our user mode stack expansion code to always take the
mmap_lock for writing before modifying the VM layout.
It's actually something we always technically should have done, but
because we didn't strictly need it, we were being lazy ("opportunistic"
sounds so much better, doesn't it?) about things, and had this hack in
place where we would extend the stack vma in-place without doing the
proper locking.
And it worked fine. We just needed to change vm_start (or, in the case
of grow-up stacks, vm_end) and together with some special ad-hoc locking
using the anon_vma lock and the mm->page_table_lock, it all was fairly
straightforward.
That is, it was all fine until Ruihan Li pointed out that now that the
vma layout uses the maple tree code, we *really* don't just change
vm_start and vm_end any more, and the locking really is broken. Oops.
It's not actually all _that_ horrible to fix this once and for all, and
do proper locking, but it's a bit painful. We have basically three
different cases of stack expansion, and they all work just a bit
differently:
- the common and obvious case is the page fault handling. It's actually
fairly simple and straightforward, except for the fact that we have
something like 24 different versions of it, and you end up in a maze
of twisty little passages, all alike.
- the simplest case is the execve() code that creates a new stack.
There are no real locking concerns because it's all in a private new
VM that hasn't been exposed to anybody, but lockdep still can end up
unhappy if you get it wrong.
- and finally, we have GUP and page pinning, which shouldn't really be
expanding the stack in the first place, but in addition to execve()
we also use it for ptrace(). And debuggers do want to possibly access
memory under the stack pointer and thus need to be able to expand the
stack as a special case.
None of these cases are exactly complicated, but the page fault case in
particular is just repeated slightly differently many many times. And
ia64 in particular has a fairly complicated situation where you can have
both a regular grow-down stack _and_ a special grow-up stack for the
register backing store.
So to make this slightly more manageable, the bulk of this series is to
first create a helper function for the most common page fault case, and
convert all the straightforward architectures to it.
Thus the new 'lock_mm_and_find_vma()' helper function, which ends up
being used by x86, arm, powerpc, mips, riscv, alpha, arc, csky, hexagon,
loongarch, nios2, sh, sparc32, and xtensa. So we not only convert more
than half the architectures, we now have more shared code and avoid some
of those twisty little passages.
And largely due to this common helper function, the full diffstat of
this series ends up deleting more lines than it adds.
That still leaves eight architectures (ia64, m68k, microblaze, openrisc,
parisc, s390, sparc64 and um) that end up doing 'expand_stack()'
manually because they are doing something slightly different from the
normal pattern. Along with the couple of special cases in execve() and
GUP.
So there's a couple of patches that first create 'locked' helper
versions of the stack expansion functions, so that there's a obvious
path forward in the conversion. The execve() case is then actually
pretty simple, and is a nice cleanup from our old "grow-up stackls are
special, because at execve time even they grow down".
The #ifdef CONFIG_STACK_GROWSUP in that code just goes away, because
it's just more straightforward to write out the stack expansion there
manually, instead od having get_user_pages_remote() do it for us in some
situations but not others and have to worry about locking rules for GUP.
And the final step is then to just convert the remaining odd cases to a
new world order where 'expand_stack()' is called with the mmap_lock held
for reading, but where it might drop it and upgrade it to a write, only
to return with it held for reading (in the success case) or with it
completely dropped (in the failure case).
In the process, we remove all the stack expansion from GUP (where
dropping the lock wouldn't be ok without special rules anyway), and add
it in manually to __access_remote_vm() for ptrace().
Thanks to Adrian Glaubitz and Frank Scheiner who tested the ia64 cases.
Everything else here felt pretty straightforward, but the ia64 rules for
stack expansion are really quite odd and very different from everything
else. Also thanks to Vegard Nossum who caught me getting one of those
odd conditions entirely the wrong way around.
Anyway, I think I want to actually move all the stack expansion code to
a whole new file of its own, rather than have it split up between
mm/mmap.c and mm/memory.c, but since this will have to be backported to
the initial maple tree vma introduction anyway, I tried to keep the
patches _fairly_ minimal.
Also, while I don't think it's valid to expand the stack from GUP, the
final patch in here is a "warn if some crazy GUP user wants to try to
expand the stack" patch. That one will be reverted before the final
release, but it's left to catch any odd cases during the merge window
and release candidates.
Reported-by: Ruihan Li <lrh2000@pku.edu.cn>
* branch 'expand-stack':
gup: add warning if some caller would seem to want stack expansion
mm: always expand the stack with the mmap write lock held
execve: expand new process stack manually ahead of time
mm: make find_extend_vma() fail if write lock not held
powerpc/mm: convert coprocessor fault to lock_mm_and_find_vma()
mm/fault: convert remaining simple cases to lock_mm_and_find_vma()
arm/mm: Convert to using lock_mm_and_find_vma()
riscv/mm: Convert to using lock_mm_and_find_vma()
mips/mm: Convert to using lock_mm_and_find_vma()
powerpc/mm: Convert to using lock_mm_and_find_vma()
arm64/mm: Convert to using lock_mm_and_find_vma()
mm: make the page fault mmap locking killable
mm: introduce new 'lock_mm_and_find_vma()' page fault helper
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
The changes queued up for v6.5-rc1 for sysctl are in line with
prior efforts to stop usage of deprecated routines which incur
recursion and also make it hard to remove the empty array element
in each sysctl array declaration. The most difficult user to modify
was parport which required a bit of re-thinking of how to declare shared
sysctls there, Joel Granados has stepped up to the plate to do most of
this work and eventual removal of register_sysctl_table(). That work
ended up saving us about 1465 bytes according to bloat-o-meter. Since
we gained a few bloat-o-meter karma points I moved two rather small
sysctl arrays from kernel/sysctl.c leaving us only two more sysctl
arrays to move left.
Most changes have been tested on linux-next for about a month. The last
straggler patches are a minor parport fix, changes to the sysctl
kernel selftest so to verify correctness and prevent regressions for
the future change he made to provide an alternative solution for the
special sysctl mount point target which was using the now deprecated
sysctl child element.
This is all prep work to now finally be able to remove the empty
array element in all sysctl declarations / registrations which is
expected to save us a bit of bytes all over the kernel. That work
will be tested early after v6.5-rc1 is out.
-----BEGIN PGP SIGNATURE-----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=sXUU
-----END PGP SIGNATURE-----
Merge tag 'v6.5-rc1-sysctl-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"The changes for sysctl are in line with prior efforts to stop usage of
deprecated routines which incur recursion and also make it hard to
remove the empty array element in each sysctl array declaration.
The most difficult user to modify was parport which required a bit of
re-thinking of how to declare shared sysctls there, Joel Granados has
stepped up to the plate to do most of this work and eventual removal
of register_sysctl_table(). That work ended up saving us about 1465
bytes according to bloat-o-meter. Since we gained a few bloat-o-meter
karma points I moved two rather small sysctl arrays from
kernel/sysctl.c leaving us only two more sysctl arrays to move left.
Most changes have been tested on linux-next for about a month. The
last straggler patches are a minor parport fix, changes to the sysctl
kernel selftest so to verify correctness and prevent regressions for
the future change he made to provide an alternative solution for the
special sysctl mount point target which was using the now deprecated
sysctl child element.
This is all prep work to now finally be able to remove the empty array
element in all sysctl declarations / registrations which is expected
to save us a bit of bytes all over the kernel. That work will be
tested early after v6.5-rc1 is out"
* tag 'v6.5-rc1-sysctl-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: replace child with an enumeration
sysctl: Remove debugging dump_stack
test_sysclt: Test for registering a mount point
test_sysctl: Add an option to prevent test skip
test_sysctl: Add an unregister sysctl test
test_sysctl: Group node sysctl test under one func
test_sysctl: Fix test metadata getters
parport: plug a sysctl register leak
sysctl: move security keys sysctl registration to its own file
sysctl: move umh sysctl registration to its own file
signal: move show_unhandled_signals sysctl to its own file
sysctl: remove empty dev table
sysctl: Remove register_sysctl_table
sysctl: Refactor base paths registrations
sysctl: stop exporting register_sysctl_table
parport: Removed sysctl related defines
parport: Remove register_sysctl_table from parport_default_proc_register
parport: Remove register_sysctl_table from parport_device_proc_register
parport: Remove register_sysctl_table from parport_proc_register
parport: Move magic number "15" to a define
Some servers may return error codes from REQ_GET_DFS_REFERRAL requests
that are unexpected by the client, so to make it easier, assume
non-DFS mounts when the client can't get the initial DFS referral of
@ctx->UNC in dfs_mount_share().
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When having two DFS root mounts that are connected to same namespace,
same mount options but different prefix paths, we can't really use the
shared @server->origin_fullpath when chasing DFS links in them.
Move the origin_fullpath field to cifs_tcon structure so when having
shared DFS root mounts with different prefix paths, and we need to
chase any DFS links, dfs_get_automount_devname() will pick up the
correct full path out of the @tcon that will be used for the new
mount.
Before patch
mount.cifs //dom/dfs/dir /mnt/1 -o ...
mount.cifs //dom/dfs /mnt/2 -o ...
# shared server, ses, tcon
# server: origin_fullpath=//dom/dfs/dir
# @server->origin_fullpath + '/dir/link1'
$ ls /mnt/2/dir/link1
ls: cannot open directory '/mnt/2/dir/link1': No such file or directory
After patch
mount.cifs //dom/dfs/dir /mnt/1 -o ...
mount.cifs //dom/dfs /mnt/2 -o ...
# shared server & ses
# tcon_1: origin_fullpath=//dom/dfs/dir
# tcon_2: origin_fullpath=//dom/dfs
# @tcon_2->origin_fullpath + '/dir/link1'
$ ls /mnt/2/dir/link1
dir0 dir1 dir10 dir3 dir5 dir6 dir7 dir9 target2_file.txt tsub
Fixes: 8e3554150d ("cifs: fix sharing of DFS connections")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
top-level directories.
- Douglas Anderson has added a new "buddy" mode to the hardlockup
detector. It permits the detector to work on architectures which
cannot provide the required interrupts, by having CPUs periodically
perform checks on other CPUs.
- Zhen Lei has enhanced kexec's ability to support two crash regions.
- Petr Mladek has done a lot of cleanup on the hard lockup detector's
Kconfig entries.
- And the usual bunch of singleton patches in various places.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJelTAAKCRDdBJ7gKXxA
juDkAP0VXWynzkXoojdS/8e/hhi+htedmQ3v2dLZD+vBrctLhAEA7rcH58zAVoWa
2ejqO6wDrRGUC7JQcO9VEjT0nv73UwU=
=F293
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
directories
- Douglas Anderson has added a new "buddy" mode to the hardlockup
detector. It permits the detector to work on architectures which
cannot provide the required interrupts, by having CPUs periodically
perform checks on other CPUs
- Zhen Lei has enhanced kexec's ability to support two crash regions
- Petr Mladek has done a lot of cleanup on the hard lockup detector's
Kconfig entries
- And the usual bunch of singleton patches in various places
* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
kernel/time/posix-stubs.c: remove duplicated include
ocfs2: remove redundant assignment to variable bit_off
watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
devres: show which resource was invalid in __devm_ioremap_resource()
watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
watchdog/hardlockup: make the config checks more straightforward
watchdog/hardlockup: sort hardlockup detector related config values a logical way
watchdog/hardlockup: move SMP barriers from common code to buddy code
watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
...
- Yosry has also eliminated cgroup's atomic rstat flushing.
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability.
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning.
- Lorenzo Stoakes has done some maintanance work on the get_user_pages()
interface.
- Liam Howlett continues with cleanups and maintenance work to the maple
tree code. Peng Zhang also does some work on maple tree.
- Johannes Weiner has done some cleanup work on the compaction code.
- David Hildenbrand has contributed additional selftests for
get_user_pages().
- Thomas Gleixner has contributed some maintenance and optimization work
for the vmalloc code.
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code.
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting.
- Christoph Hellwig has some cleanups for the filemap/directio code.
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the provided
APIs rather than open-coding accesses.
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings.
- John Hubbard has a series of fixes to the MM selftesting code.
- ZhangPeng continues the folio conversion campaign.
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock.
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
128 to 8.
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management.
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code.
- Vishal Moola also has done some folio conversion work.
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
=B7yQ
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
Handle trailing and leading separators when parsing UNC and prefix
paths in smb3_parse_devname(). Then, store the sanitised paths in
smb3_fs_context::source.
This fixes the following cases
$ mount //srv/share// /mnt/1 -o ...
$ cat /mnt/1/d0/f0
cat: /mnt/1/d0/f0: Invalid argument
The -EINVAL was returned because the client sent SMB2_CREATE "\\d0\f0"
rather than SMB2_CREATE "\d0\f0".
$ mount //srv//share /mnt/1 -o ...
mount: Invalid argument
The -EINVAL was returned correctly although the client only realised
it after sending a couple of bad requests rather than bailing out
earlier when parsing mount options.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Having the ClientGUID info makes it easier to debug
issues related to a client on a server that serves a
number of clients.
This change prints the ClientGUID in DebugData.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Chech the session state and skip it if it's exiting.
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Don't collect exiting session in smb2_reconnect_server(), because it
will be released soon.
Note that the exiting session will stay in server->smb_ses_list until
it complete the cifs_free_ipc() and logoff() and then delete itself
from the list.
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
All the server credits and in-flight info is protected by req_lock.
Once the req_lock is held, and we've determined that we have enough
credits to continue, this lock cannot be dropped till we've made the
changes to credits and in-flight count.
However, we used to drop the lock in order to avoid deadlock with
the recent srv_lock. This could cause the checks already made to be
invalidated.
Fixed it by moving the server status check to before locking req_lock.
Fixes: d7d7a66aac ("cifs: avoid use of global locks for high contention data")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In smb2_compound_op we have a possible use-after-free
which can cause hard to debug problems later on.
This was revealed during stress testing with KASAN enabled
kernel. Fixing it by moving the cfile free call to
a few lines below, after the usage.
Fixes: 76894f3e2f ("cifs: improve symlink handling for smb2+")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members
-----BEGIN PGP SIGNATURE-----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=s0j1
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"There are three areas of note:
A bunch of strlcpy()->strscpy() conversions ended up living in my tree
since they were either Acked by maintainers for me to carry, or got
ignored for multiple weeks (and were trivial changes).
The compiler option '-fstrict-flex-arrays=3' has been enabled
globally, and has been in -next for the entire devel cycle. This
changes compiler diagnostics (though mainly just -Warray-bounds which
is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_
coverage. In other words, there are no new restrictions, just
potentially new warnings. Any new FORTIFY warnings we've seen have
been fixed (usually in their respective subsystem trees). For more
details, see commit df8fc4e934.
The under-development compiler attribute __counted_by has been added
so that we can start annotating flexible array members with their
associated structure member that tracks the count of flexible array
elements at run-time. It is possible (likely?) that the exact syntax
of the attribute will change before it is finalized, but GCC and Clang
are working together to sort it out. Any changes can be made to the
macro while we continue to add annotations.
As an example of that last case, I have a treewide commit waiting with
such annotations found via Coccinelle:
https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b
Also see commit dd06e72e68 for more details.
Summary:
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex
arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members"
* tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits)
netfilter: ipset: Replace strlcpy with strscpy
uml: Replace strlcpy with strscpy
um: Use HOST_DIR for mrproper
kallsyms: Replace all non-returning strlcpy with strscpy
sh: Replace all non-returning strlcpy with strscpy
of/flattree: Replace all non-returning strlcpy with strscpy
sparc64: Replace all non-returning strlcpy with strscpy
Hexagon: Replace all non-returning strlcpy with strscpy
kobject: Use return value of strreplace()
lib/string_helpers: Change returned value of the strreplace()
jbd2: Avoid printing outside the boundary of the buffer
checkpatch: Check for 0-length and 1-element arrays
riscv/purgatory: Do not use fortified string functions
s390/purgatory: Do not use fortified string functions
x86/purgatory: Do not use fortified string functions
acpi: Replace struct acpi_table_slit 1-element array with flex-array
clocksource: Replace all non-returning strlcpy with strscpy
string: use __builtin_memcpy() in strlcpy/strlcat
staging: most: Replace all non-returning strlcpy with strscpy
drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy
...
- Fix a few comments for correctness and typos (Baruch Siach)
- Small simplifications for binfmt (Christophe JAILLET)
- Set p_align to 4 for PT_NOTE in core dump (Fangrui Song)
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmSbc94WHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJkWaEACb5idNLPHL5lb7zr1HGXWVnpo9
3a4gwNpZpDpODRSL5VQ93WUwzN+74hN15h85orXbjQRZRXJVM4gNmgHargqs4LIb
LrbB04ylCoAnz+MYPAPkD0Yw4WZXqwK33V11V8luUf9q+zFemjQ0rOzFDmrX5a+y
qxq8CvY/jETmi5GPzKn35w8gJs8X++8GPIQ0ZDeQzYGZsZZ4m0+f1tqsC9bOmn/F
LRn0ePaSTrYPQILQ2xVjlCv9HHk8MUsJu7+eyOI0NemWlITookofkycjMDe+9LpS
hRKhdNbni24BEN2eDdJNC5TeXlvAOEQv4n4GFZ37sUQGdDhjdQTYF9sySluX5+Bo
fx0qCQyWJMoskYBbBTAERv9hBxZctU94k82XaUxZA1bx0f9h+0USqwL9YrOnF5p/
4734FUjeotGd8uFpUe/B6/SjRQ6WwYzwoEME/5Q/EKuotLrk3SfLu3fH/rl3cGH8
mlt4vwD0xDfFgb4Pj5wf8lqxpK+mMCusExqvzKVVV4L7Q5gDIntA2BvSRykjQ7VD
vwRaQDM9mnDD/t0FgDVVHl91UF5Fsctf81UvfoI5eIMKqFo3NRGCV8znFf8G8//i
8Qmjj4kpxN+zMOi4nKsTjNDFmauRmOrGaDrWZnyO3m/VlYrYodnCKJbdLsqWH4zx
a2O3oVICYLUeM0NEkQ==
=01FE
-----END PGP SIGNATURE-----
Merge tag 'execve-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Fix a few comments for correctness and typos (Baruch Siach)
- Small simplifications for binfmt (Christophe JAILLET)
- Set p_align to 4 for PT_NOTE in core dump (Fangrui Song)
* tag 'execve-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf: fix comment typo s/reset/regset/
elf: correct note name comment
binfmt: Slightly simplify elf_fdpic_map_file()
binfmt: Use struct_size()
coredump, vmcore: Set p_align to 4 for PT_NOTE
-----BEGIN PGP SIGNATURE-----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=3nWy
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- A SafeSetID patch to correct what appears to be a cut-n-paste typo in
the code causing a UID to be printed where a GID was desired.
This is coming via the LSM tree because we haven't been able to get a
response from the SafeSetID maintainer (Micah Morton) in several
months. Hopefully we are able to get in touch with Micah, but until
we do I'm going to pick them up in the LSM tree.
- A small fix to the reiserfs LSM xattr code.
We're continuing to work through some issues with the reiserfs code
as we try to fixup the LSM xattr handling, but in the process we're
uncovering some ugly problems in reiserfs and we may just end up
removing the LSM xattr support in reiserfs prior to reiserfs'
removal.
For better or worse, this shouldn't impact any of the reiserfs users,
as we discovered that LSM xattrs on reiserfs were completely broken,
meaning no one is currently using the combo of reiserfs and a file
labeling LSM.
- A tweak to how the cap_user_data_t struct/typedef is declared in the
header file to appease the Sparse gods.
- In the process of trying to sort out the SafeSetID lost-maintainer
problem I realized that I needed to update the labeled networking
entry to "Supported".
- Minor comment/documentation and spelling fixes.
* tag 'lsm-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
device_cgroup: Fix kernel-doc warnings in device_cgroup
SafeSetID: fix UID printed instead of GID
MAINTAINERS: move labeled networking to "supported"
capability: erase checker warnings about struct __user_cap_data_struct
lsm: fix a number of misspellings
reiserfs: Initialize sec->length in reiserfs_security_init().
capability: fix kernel-doc warnings in capability.c
-----BEGIN PGP SIGNATURE-----
iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZJlO/xAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbS/FwA/A5GFGtKnLzFpIAXgc1G3kr8c+J/WF7RVUD+
PJNEsH6PAP41l3BTqVSeVZ+tdLSC7NbesoX0MTd+rCgAWnr+Pko2Cw==
=KqpG
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"Add support for Landlock to UML.
To do this, this fixes the way hostfs manages inodes according to the
underlying filesystem [1]. They are now properly handled as for other
filesystems, which enables Landlock support (and probably other
features).
This also extends Landlock's tests with 6 pseudo filesystems,
including hostfs"
[1] https://lore.kernel.org/all/20230612191430.339153-1-mic@digikod.net/
* tag 'landlock-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add hostfs tests
selftests/landlock: Add tests for pseudo filesystems
selftests/landlock: Make mounts configurable
selftests/landlock: Add supports_filesystem() helper
selftests/landlock: Don't create useless file layouts
hostfs: Fix ephemeral inodes
This finishes the job of always holding the mmap write lock when
extending the user stack vma, and removes the 'write_locked' argument
from the vm helper functions again.
For some cases, we just avoid expanding the stack at all: drivers and
page pinning really shouldn't be extending any stacks. Let's see if any
strange users really wanted that.
It's worth noting that architectures that weren't converted to the new
lock_mm_and_find_vma() helper function are left using the legacy
"expand_stack()" function, but it has been changed to drop the mmap_lock
and take it for writing while expanding the vma. This makes it fairly
straightforward to convert the remaining architectures.
As a result of dropping and re-taking the lock, the calling conventions
for this function have also changed, since the old vma may no longer be
valid. So it will now return the new vma if successful, and NULL - and
the lock dropped - if the area could not be extended.
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # ia64
Tested-by: Frank Scheiner <frank.scheiner@web.de> # ia64
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In nfsd4_encode_fattr(), TIME_CREATE was being written out after all
other times. However, they should be written out in an order that
matches the bit flags in bmval1, which in this case are
#define FATTR4_WORD1_TIME_ACCESS (1UL << 15)
#define FATTR4_WORD1_TIME_CREATE (1UL << 18)
#define FATTR4_WORD1_TIME_DELTA (1UL << 19)
#define FATTR4_WORD1_TIME_METADATA (1UL << 20)
#define FATTR4_WORD1_TIME_MODIFY (1UL << 21)
so TIME_CREATE should come second.
I noticed this on a FreeBSD NFSv4.2 client, which supports creation
times. On this client, file times were weirdly permuted. With this
patch applied on the server, times looked normal on the client.
Fixes: e377a3e698 ("nfsd: Add support for the birth time attribute")
Link: https://unix.stackexchange.com/q/749605/56202
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This was noticed by a user who noticied that the mtime of a file
backing a loopback device was getting bumped when the loopback device
is mounted read/only. Note: This doesn't show up when doing a
loopback mount of a file directly, via "mount -o ro /tmp/foo.img
/mnt", since the loop device is set read-only when mount automatically
creates loop device. However, this is noticeable for a LUKS loop
device like this:
% cryptsetup luksOpen /tmp/foo.img test
% mount -o ro /dev/loop0 /mnt ; umount /mnt
or, if LUKS is not in use, if the user manually creates the loop
device like this:
% losetup /dev/loop0 /tmp/foo.img
% mount -o ro /dev/loop0 /mnt ; umount /mnt
The modified mtime causes rsync to do a rolling checksum scan of the
file on the local and remote side, incrementally increasing the time
to rsync the not-modified-but-touched image file.
Fixes: eee00237fa ("ext4: commit super block if fs record error when journal record without error")
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/ZIauBR7YiV3rVAHL@glitch
Reported-by: Sean Greenslade <sean@seangreenslade.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We got a NULL pointer dereference issue below while running generic/475
I/O failure pressure test.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 1 PID: 15600 Comm: fsstress Not tainted 6.4.0-rc5-xfstests-00055-gd3ab1bca26b4 #190
RIP: 0010:jbd2_journal_set_features+0x13d/0x430
...
Call Trace:
<TASK>
? __die+0x23/0x60
? page_fault_oops+0xa4/0x170
? exc_page_fault+0x67/0x170
? asm_exc_page_fault+0x26/0x30
? jbd2_journal_set_features+0x13d/0x430
jbd2_journal_revoke+0x47/0x1e0
__ext4_forget+0xc3/0x1b0
ext4_free_blocks+0x214/0x2f0
ext4_free_branches+0xeb/0x270
ext4_ind_truncate+0x2bf/0x320
ext4_truncate+0x1e4/0x490
ext4_handle_inode_extension+0x1bd/0x2a0
? iomap_dio_complete+0xaf/0x1d0
The root cause is the journal super block had been failed to write out
due to I/O fault injection, it's uptodate bit was cleared by
end_buffer_write_sync() and didn't reset yet in jbd2_write_superblock().
And it raced by journal_get_superblock()->bh_read(), unfortunately, the
read IO is also failed, so the error handling in
journal_fail_superblock() unexpectedly clear the journal->j_sb_buffer,
finally lead to above NULL pointer dereference issue.
If the journal super block had been read and verified, there is no need
to call bh_read() read it again even if it has been failed to written
out. So the fix could be simply move buffer_verified(bh) in front of
bh_read(). Also remove a stale comment left in
jbd2_journal_check_used_features().
Fixes: 51bacdba23d8 ("jbd2: factor out journal initialization from journal_get_superblock()")
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616015547.3155195-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rename ext4_quota_off_umount() to ext4_quotas_off(), and add type
parameter to replace open code in ext4_enable_quotas().
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230327141630.156875-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Always enable 'JBD2_CYCLE_RECORD' journal option on ext4, letting the
jbd2 continue to record new journal transactions from the recovered
journal head or the checkpointed transactions in the previous mount.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230322013353.1843306-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For a newly mounted file system, the journal committing thread always
record new transactions from the start of the journal area, no matter
whether the journal was clean or just has been recovered. So the logdump
code in debugfs cannot dump continuous logs between each mount, it is
disadvantageous to analysis corrupted file system image and locate the
file system inconsistency bugs.
If we get a corrupted file system in the running products and want to
find out what has happened, besides lookup the system log, one effective
way is to backtrack the journal log. But we may not always run e2fsck
before each mount and the default fsck -a mode also cannot always
checkout all inconsistencies, so it could left over some inconsistencies
into the next mount until we detect it. Finally, transactions in the
journal may probably discontinuous and some relatively new transactions
has been covered, it becomes hard to analyse. If we could record
transactions continuously between each mount, we could acquire more
useful info from the journal. Like this:
|Previous mount checkpointed/recovered logs|Current mount logs |
|{------}{---}{--------} ... {------}| ... |{======}{========}...000000|
And yes the journal area is limited and cannot record everything, the
problematic transaction may also be covered even if we do this, but
this is still useful for fuzzy tests and short-running products.
This patch save the head blocknr in the superblock after flushing the
journal or unmounting the file system, let the next mount could continue
to record new transaction behind it. This change is backward compatible
because the old kernel does not care about the head blocknr of the
journal. It is also fine if we mount a clean old image without valid
head blocknr, we fail back to set it to s_first just like before.
Finally, for the case of mount an unclean file system, we could also get
the journal head easily after scanning/replaying the journal, it will
continue to record new transaction after the recovered transactions.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230322013353.1843306-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
journal->j_format_version is no longer used, remove it.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230315013128.3911115-7-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Current journal_get_superblock() couple journal superblock checking and
partial journal initialization, factor out initialization part from it
to make things clear.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230315013128.3911115-6-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We should only check and set extented features if journal format version
is 2, and now we check the in memory copy of the superblock
'journal->j_format_version', which relys on the parameter initialization
sequence, switch to use the h_blocktype in superblock cloud be more
clear.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230315013128.3911115-5-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As discussed in [1], 'sbi->s_journal_bdev != sb->s_bdev' will always
become true if sbi->s_journal_bdev exists. Filesystem block device and
journal block device are both opened with 'FMODE_EXCL' mode, so these
two devices can't be same one. Then we can remove the redundant checking
'sbi->s_journal_bdev != sb->s_bdev' if 'sbi->s_journal_bdev' exists.
[1] https://lore.kernel.org/lkml/f86584f6-3877-ff18-47a1-2efaa12d18b2@huawei.com/
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230315013128.3911115-3-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Following process makes ext4 load stale buffer heads from last failed
mounting in a new mounting operation:
mount_bdev
ext4_fill_super
| ext4_load_and_init_journal
| ext4_load_journal
| jbd2_journal_load
| load_superblock
| journal_get_superblock
| set_buffer_verified(bh) // buffer head is verified
| jbd2_journal_recover // failed caused by EIO
| goto failed_mount3a // skip 'sb->s_root' initialization
deactivate_locked_super
kill_block_super
generic_shutdown_super
if (sb->s_root)
// false, skip ext4_put_super->invalidate_bdev->
// invalidate_mapping_pages->mapping_evict_folio->
// filemap_release_folio->try_to_free_buffers, which
// cannot drop buffer head.
blkdev_put
blkdev_put_whole
if (atomic_dec_and_test(&bdev->bd_openers))
// false, systemd-udev happens to open the device. Then
// blkdev_flush_mapping->kill_bdev->truncate_inode_pages->
// truncate_inode_folio->truncate_cleanup_folio->
// folio_invalidate->block_invalidate_folio->
// filemap_release_folio->try_to_free_buffers will be skipped,
// dropping buffer head is missed again.
Second mount:
ext4_fill_super
ext4_load_and_init_journal
ext4_load_journal
ext4_get_journal
jbd2_journal_init_inode
journal_init_common
bh = getblk_unmovable
bh = __find_get_block // Found stale bh in last failed mounting
journal->j_sb_buffer = bh
jbd2_journal_load
load_superblock
journal_get_superblock
if (buffer_verified(bh))
// true, skip journal->j_format_version = 2, value is 0
jbd2_journal_recover
do_one_pass
next_log_block += count_tags(journal, bh)
// According to journal_tag_bytes(), 'tag_bytes' calculating is
// affected by jbd2_has_feature_csum3(), jbd2_has_feature_csum3()
// returns false because 'j->j_format_version >= 2' is not true,
// then we get wrong next_log_block. The do_one_pass may exit
// early whenoccuring non JBD2_MAGIC_NUMBER in 'next_log_block'.
The filesystem is corrupted here, journal is partially replayed, and
new journal sequence number actually is already used by last mounting.
The invalidate_bdev() can drop all buffer heads even racing with bare
reading block device(eg. systemd-udev), so we can fix it by invalidating
bdev in error handling path in __ext4_fill_super().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217171
Fixes: 25ed6e8a54 ("jbd2: enable journal clients to enable v2 checksumming")
Cc: stable@vger.kernel.org # v3.5
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230315013128.3911115-2-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We've had reports of significant performance regression of sub-block
(unaligned) direct writes due to the added exclusivity restrictions
in ext4. The purpose of the exclusivity requirement for unaligned
direct writes is to avoid data corruption caused by unserialized
partial block zeroing in the iomap dio layer across overlapping
writes.
XFS has similar requirements for the same underlying reasons, yet
doesn't suffer the extreme performance regression that ext4 does.
The reason for this is that XFS utilizes IOMAP_DIO_OVERWRITE_ONLY
mode, which allows for optimistic submission of concurrent unaligned
I/O and kicks back writes that require partial block zeroing such
that they can be submitted in a safe, exclusive context. Since ext4
already performs most of these checks pre-submission, it can support
something similar without necessarily relying on the iomap flag and
associated retry mechanism.
Update the dio write submission path to allow concurrent submission
of unaligned direct writes that are purely overwrite and so will not
require block zeroing. To improve readability of the various related
checks, move the unaligned I/O handling down into
ext4_dio_write_checks(), where the dio draining and force wait logic
can immediately follow the locking requirement checks. Finally, the
IOMAP_DIO_OVERWRITE_ONLY flag is set to enable a warning check as a
precaution should the ext4 overwrite logic ever become inconsistent
with the zeroing expectations of iomap dio.
The performance improvement of sub-block direct write I/O is shown
in the following fio test on a 64xcpu guest vm:
Test: fio --name=test --ioengine=libaio --direct=1 --group_reporting
--overwrite=1 --thread --size=10G --filename=/mnt/fio
--readwrite=write --ramp_time=10s --runtime=60s --numjobs=8
--blocksize=2k --iodepth=256 --allow_file_create=0
v6.2: write: IOPS=4328, BW=8724KiB/s
v6.2 (patched): write: IOPS=801k, BW=1565MiB/s
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230314130759.642710-1-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Line wrap and slightly clarify the comments describing mballoc's
cirtiera.
Define EXT4_MB_NUM_CRS as part of the enum, so that it will
automatically get updated when criteria is added or removed.
Also fix a potential unitialized use of 'cr' variable if
CONFIG_EXT4_DEBUG is enabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After ext4_es_insert_extent() returns void, the return value in
ext4_zeroout_es() is also unnecessary, so make it return void too.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-13-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now ext4_es_insert_extent() never return error, so make it return void.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-12-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Similar to in ext4_es_insert_delayed_block(), we use preallocations that
do not fail to avoid inconsistencies, but we do not care about es that are
not must be kept, and we return 0 even if such es memory allocation fails.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-9-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Similar to in ext4_es_remove_extent(), we use a no-fail preallocation
to avoid inconsistencies, except that here we may have to preallocate
two extent_status.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-8-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If __es_remove_extent() returns an error it means that when splitting
extent, allocating an extent that must be kept failed, where returning
an error directly would cause the extent tree to be inconsistent. So we
use GFP_NOFAIL to pre-allocate an extent_status and pass it to
__es_remove_extent() to avoid this problem.
In addition, since the allocated memory is outside the i_es_lock, the
extent_status tree may change and the pre-allocated extent_status is
no longer needed, so we release the pre-allocated extent_status when
es->es_len is not initialized.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-7-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When splitting extent, if the second extent can not be dropped, we return
-ENOMEM and use GFP_NOFAIL to preallocate an extent_status outside of
i_es_lock and pass it to __es_remove_extent() to be used as the second
extent. This ensures that __es_remove_extent() is executed successfully,
thus ensuring consistency in the extent status tree. If the second extent
is not undroppable, we simply drop it and return 0. Then retry is no longer
necessary, remove it.
Now, __es_remove_extent() will always remove what it should, maybe more.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-6-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pass a extent_status pointer prealloc to __es_insert_extent(). If the
pointer is non-null, it is used directly when a new extent_status is
needed to avoid memory allocation failures.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out __es_alloc_extent() and __es_free_extent(), which only allocate
and free extent_status in these two helpers.
The ext4_es_alloc_extent() function is split into __es_alloc_extent()
and ext4_es_init_extent(). In __es_alloc_extent() we allocate memory using
GFP_KERNEL | __GFP_NOFAIL | __GFP_ZERO if the memory allocation cannot
fail, otherwise we use GFP_ATOMIC. and the ext4_es_init_extent() is used to
initialize extent_status and update related variables after a successful
allocation.
This is to prepare for the use of pre-allocated extent_status later.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the extent status tree, we have extents which we can just drop without
issues and extents we must not drop - this depends on the extent's status
- currently ext4_es_is_delayed() extents must stay, others may be dropped.
A helper function is added to help determine if the current extent can
be dropped, although only ext4_es_is_delayed() extents cannot be dropped
currently.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In our fault injection test, we create an ext4 file, migrate it to
non-extent based file, then punch a hole and finally trigger a WARN_ON
in the ext4_da_update_reserve_space():
EXT4-fs warning (device sda): ext4_da_update_reserve_space:369:
ino 14, used 11 with only 10 reserved data blocks
When writing back a non-extent based file, if we enable delalloc, the
number of reserved blocks will be subtracted from the number of blocks
mapped by ext4_ind_map_blocks(), and the extent status tree will be
updated. We update the extent status tree by first removing the old
extent_status and then inserting the new extent_status. If the block range
we remove happens to be in an extent, then we need to allocate another
extent_status with ext4_es_alloc_extent().
use old to remove to add new
|----------|------------|------------|
old extent_status
The problem is that the allocation of a new extent_status failed due to a
fault injection, and __es_shrink() did not get free memory, resulting in
a return of -ENOMEM. Then do_writepages() retries after receiving -ENOMEM,
we map to the same extent again, and the number of reserved blocks is again
subtracted from the number of blocks in that extent. Since the blocks in
the same extent are subtracted twice, we end up triggering WARN_ON at
ext4_da_update_reserve_space() because used > ei->i_reserved_data_blocks.
For non-extent based file, we update the number of reserved blocks after
ext4_ind_map_blocks() is executed, which causes a problem that when we call
ext4_ind_map_blocks() to create a block, it doesn't always create a block,
but we always reduce the number of reserved blocks. So we move the logic
for updating reserved blocks to ext4_ind_map_blocks() to ensure that the
number of reserved blocks is updated only after we do succeed in allocating
some new blocks.
Fixes: 5f634d064c ("ext4: Fix quota accounting error with fallocate")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
mballoc criterias have historically been called by numbers
like CR0, CR1... however this makes it confusing to understand
what each criteria is about.
Change these criterias from numbers to symbolic names and add
relevant comments. While we are at it, also reformat and add some
comments to ext4_seq_mb_stats_show() for better readability.
Additionally, define CR_FAST which signifies the criteria
below which we can make quicker decisions like:
* quitting early if (free block < requested len)
* avoiding to scan free extents smaller than required len.
* avoiding to initialize buddy cache and work with existing cache
* limiting prefetches
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/a2dc6ec5aea5e5e68cf8e788c2a964ffead9c8b0.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
CR1_5 aims to optimize allocations which can't be satisfied in CR1. The
fact that we couldn't find a group in CR1 suggests that it would be
difficult to find a continuous extent to compleltely satisfy our
allocations. So before falling to the slower CR2, in CR1.5 we
proactively trim the the preallocations so we can find a group with
(free / fragments) big enough. This speeds up our allocation at the
cost of slightly reduced preallocation.
The patch also adds a new sysfs tunable:
* /sys/fs/ext4/<partition>/mb_cr1_5_max_trim_order
This controls how much CR1.5 can trim a request before falling to CR2.
For example, for a request of order 7 and max trim order 2, CR1.5 can
trim this upto order 5.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/150fdf65c8e4cc4dba71e020ce0859bcf636a5ff.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Make the logic of searching average fragment list of a given order reusable
by abstracting it out to a differnet function. This will also avoid
code duplication in upcoming patches.
No functional changes.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/028c11d95b17ce0285f45456709a0ca922df1b83.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before this patch, the call stack in ext4_run_li_request is as follows:
/*
* nr = no. of BGs we want to fetch (=s_mb_prefetch)
* prefetch_ios = no. of BGs not uptodate after
* ext4_read_block_bitmap_nowait()
*/
next_group = ext4_mb_prefetch(sb, group, nr, prefetch_ios);
ext4_mb_prefetch_fini(sb, next_group prefetch_ios);
ext4_mb_prefetch_fini() will only try to initialize buddies for BGs in
range [next_group - prefetch_ios, next_group). This is incorrect since
sometimes (prefetch_ios < nr), which causes ext4_mb_prefetch_fini() to
incorrectly ignore some of the BGs that might need initialization. This
issue is more notable now with the previous patch enabling "fetching" of
BLOCK_UNINIT BGs which are marked buffer_uptodate by default.
Fix this by passing nr to ext4_mb_prefetch_fini() instead of
prefetch_ios so that it considers the right range of groups.
Similarly, make sure we don't pass nr=0 to ext4_mb_prefetch_fini() in
ext4_mb_regular_allocator() since we might have prefetched BLOCK_UNINIT
groups that would need buddy initialization.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/05e648ae04ec5b754207032823e9c1de9a54f87a.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, ext4_mb_prefetch() and ext4_mb_prefetch_fini() skip
BLOCK_UNINIT groups since fetching their bitmaps doesn't need disk IO.
As a consequence, we end not initializing the buddy structures and CR0/1
lists for these BGs, even though it can be done without any disk IO
overhead. Hence, don't skip such BGs during prefetch and prefetch_fini.
This improves the accuracy of CR0/1 allocation as earlier, we could have
essentially empty BLOCK_UNINIT groups being ignored by CR0/1 due to their buddy
not being initialized, leading to slower CR2 allocations. With this patch CR0/1
will be able to discover these groups as well, thus improving performance.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/dc3130b8daf45ffe63d8a3c1edcf00eb8ba70e1f.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we are inside ext4_mb_complex_scan_group() in CR1, we can be sure
that this group has atleast 1 big enough continuous free extent to satisfy
our request because (free / fragments) > goal length.
Hence, instead of wasting time looping over smaller free extents, only
try to consider the free extent if we are sure that it has enough
continuous free space to satisfy goal length. This is particularly
useful when scanning highly fragmented BGs in CR1 as, without this
patch, the allocator might stop scanning early before reaching the big
enough free extent (due to ac_found > mb_max_to_scan) which causes us to
uncessarily trim the request.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/a5473df4517c53ec940bc9b603ef83a547032a32.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Track number of allocations where the length of blocks allocated is equal to the
length of goal blocks (post normalization). This metric could be useful if
making changes to the allocator logic in the future as it could give us
visibility into how often do we trim our requests.
PS: ac_b_ex.fe_len might get modified due to preallocation efforts and
hence we use ac_f_ex.fe_len instead since we want to compare how much the
allocator was able to actually find.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/343620e2be8a237239ea2613a7a866ee8607e973.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This gives better visibility into the number of extents scanned in each
particular CR. For example, this information can be used to see how out
block group scanning logic is performing when the BG is fragmented.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/55bb6d80f6e22ed2a5a830aa045572bdffc8b1b9.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Convert criteria to be an enum so it easier to maintain and
update the tracefiles to use enum names. This change also makes
it easier to insert new criterias in the future.
There is no functional change in this patch.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/5d82fd467bdf70ea45bdaef810af3b146013946c.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_stats & ext4_mb_max_to_scan are never used. We use
sbi->s_mb_stats and sbi->s_mb_max_to_scan instead.
Hence kill these extern declarations.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/928b3142062172533b6d1b5a94de94700590fef3.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There will be changes coming in future patches which will introduce a new
criteria for block allocation. This removes the useless setting of ac_criteria.
AFAIU, this might be only used to differentiate between whether a preallocated
blocks was allocated or was regular allocator called for allocating blocks.
Hence this also adds the debug prints to identify what type of block allocation
was done in ext4_mb_show_ac().
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1dbae05617519cb6202f1b299c9d1be3e7cda763.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Function ext4_free_blocks_simple needs count in cluster. Function
ext4_free_blocks accepts count in block. Convert count to cluster
to fix the mismatch.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: stable@kernel.org
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230603150327.3596033-12-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The gist of it all is that Intel TDX and AMD SEV-SNP confidential
computing guests define the notion of accepting memory before using it
and thus preventing a whole set of attacks against such guests like
memory replay and the like.
There are a couple of strategies of how memory should be accepted
- the current implementation does an on-demand way of accepting.
-----BEGIN PGP SIGNATURE-----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=FS95
-----END PGP SIGNATURE-----
Merge tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 confidential computing update from Borislav Petkov:
- Add support for unaccepted memory as specified in the UEFI spec v2.9.
The gist of it all is that Intel TDX and AMD SEV-SNP confidential
computing guests define the notion of accepting memory before using
it and thus preventing a whole set of attacks against such guests
like memory replay and the like.
There are a couple of strategies of how memory should be accepted -
the current implementation does an on-demand way of accepting.
* tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: sevguest: Add CONFIG_CRYPTO dependency
x86/efi: Safely enable unaccepted memory in UEFI
x86/sev: Add SNP-specific unaccepted memory support
x86/sev: Use large PSC requests if applicable
x86/sev: Allow for use of the early boot GHCB for PSC requests
x86/sev: Put PSC struct on the stack in prep for unaccepted memory support
x86/sev: Fix calculation of end address based on number of pages
x86/tdx: Add unaccepted memory support
x86/tdx: Refactor try_accept_one()
x86/tdx: Make _tdx_hypercall() and __tdx_module_call() available in boot stub
efi/unaccepted: Avoid load_unaligned_zeropad() stepping into unaccepted memory
efi: Add unaccepted memory support
x86/boot/compressed: Handle unaccepted memory
efi/libstub: Implement support for unaccepted memory
efi/x86: Get full memory map in allocate_e820()
mm: Add support for unaccepted memory
ext4_free_blocks will retrieve block from bh if block parameter is zero.
Retrieve block before ext4_free_blocks_simple to avoid potentially
passing wrong block to ext4_free_blocks_simple.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: stable@kernel.org
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230603150327.3596033-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----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=zP4Y
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
-----BEGIN PGP SIGNATURE-----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=KhW4
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux
Pull splice updates from Jens Axboe:
"This kills off ITER_PIPE to avoid a race between truncate,
iov_iter_revert() on the pipe and an as-yet incomplete DMA to a bio
with unpinned/unref'ed pages from an O_DIRECT splice read. This causes
memory corruption.
Instead, we either use (a) filemap_splice_read(), which invokes the
buffered file reading code and splices from the pagecache into the
pipe; (b) copy_splice_read(), which bulk-allocates a buffer, reads
into it and then pushes the filled pages into the pipe; or (c) handle
it in filesystem-specific code.
Summary:
- Rename direct_splice_read() to copy_splice_read()
- Simplify the calculations for the number of pages to be reclaimed
in copy_splice_read()
- Turn do_splice_to() into a helper, vfs_splice_read(), so that it
can be used by overlayfs and coda to perform the checks on the
lower fs
- Make vfs_splice_read() jump to copy_splice_read() to handle
direct-I/O and DAX
- Provide shmem with its own splice_read to handle non-existent pages
in the pagecache. We don't want a ->read_folio() as we don't want
to populate holes, but filemap_get_pages() requires it
- Provide overlayfs with its own splice_read to call down to a lower
layer as overlayfs doesn't provide ->read_folio()
- Provide coda with its own splice_read to call down to a lower layer
as coda doesn't provide ->read_folio()
- Direct ->splice_read to copy_splice_read() in tty, procfs, kernfs
and random files as they just copy to the output buffer and don't
splice pages
- Provide wrappers for afs, ceph, ecryptfs, ext4, f2fs, nfs, ntfs3,
ocfs2, orangefs, xfs and zonefs to do locking and/or revalidation
- Make cifs use filemap_splice_read()
- Replace pointers to generic_file_splice_read() with pointers to
filemap_splice_read() as DIO and DAX are handled in the caller;
filesystems can still provide their own alternate ->splice_read()
op
- Remove generic_file_splice_read()
- Remove ITER_PIPE and its paraphernalia as generic_file_splice_read
was the only user"
* tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux: (31 commits)
splice: kdoc for filemap_splice_read() and copy_splice_read()
iov_iter: Kill ITER_PIPE
splice: Remove generic_file_splice_read()
splice: Use filemap_splice_read() instead of generic_file_splice_read()
cifs: Use filemap_splice_read()
trace: Convert trace/seq to use copy_splice_read()
zonefs: Provide a splice-read wrapper
xfs: Provide a splice-read wrapper
orangefs: Provide a splice-read wrapper
ocfs2: Provide a splice-read wrapper
ntfs3: Provide a splice-read wrapper
nfs: Provide a splice-read wrapper
f2fs: Provide a splice-read wrapper
ext4: Provide a splice-read wrapper
ecryptfs: Provide a splice-read wrapper
ceph: Provide a splice-read wrapper
afs: Provide a splice-read wrapper
9p: Add splice_read wrapper
net: Make sock_splice_read() use copy_splice_read() by default
tty, proc, kernfs, random: Use copy_splice_read()
...
-----BEGIN PGP SIGNATURE-----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=nN4X
-----END PGP SIGNATURE-----
Merge tag 'for-6.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Mainly core changes, refactoring and optimizations.
Performance is improved in some areas, overall there may be a
cumulative improvement due to refactoring that removed lookups in the
IO path or simplified IO submission tracking.
Core:
- submit IO synchronously for fast checksums (crc32c and xxhash),
remove high priority worker kthread
- read extent buffer in one go, simplify IO tracking, bio submission
and locking
- remove additional tracking of redirtied extent buffers, originally
added for zoned mode but actually not needed
- track ordered extent pointer in bio to avoid rbtree lookups during
IO
- scrub, use recovered data stripes as cache to avoid unnecessary
read
- in zoned mode, optimize logical to physical mappings of extents
- remove PageError handling, not set by VFS nor writeback
- cleanups, refactoring, better structure packing
- lots of error handling improvements
- more assertions, lockdep annotations
- print assertion failure with the exact line where it happens
- tracepoint updates
- more debugging prints
Performance:
- speedup in fsync(), better tracking of inode logged status can
avoid transaction commit
- IO path structures track logical offsets in data structures and
does not need to look it up
User visible changes:
- don't commit transaction for every created subvolume, this can
reduce time when many subvolumes are created in a batch
- print affected files when relocation fails
- trigger orphan file cleanup during START_SYNC ioctl
Notable fixes:
- fix crash when disabling quota and relocation
- fix crashes when removing roots from drity list
- fix transacion abort during relocation when converting from newer
profiles not covered by fallback
- in zoned mode, stop reclaiming block groups if filesystem becomes
read-only
- fix rare race condition in tree mod log rewind that can miss some
btree node slots
- with enabled fsverity, drop up-to-date page bit in case the
verification fails"
* tag 'for-6.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (194 commits)
btrfs: fix race between quota disable and relocation
btrfs: add comment to struct btrfs_fs_info::dirty_cowonly_roots
btrfs: fix race when deleting free space root from the dirty cow roots list
btrfs: fix race when deleting quota root from the dirty cow roots list
btrfs: tracepoints: also show actual number of the outstanding extents
btrfs: update i_version in update_dev_time
btrfs: make btrfs_compressed_bioset static
btrfs: add handling for RAID1C23/DUP to btrfs_reduce_alloc_profile
btrfs: scrub: remove btrfs_fs_info::scrub_wr_completion_workers
btrfs: scrub: remove scrub_ctx::csum_list member
btrfs: do not BUG_ON after failure to migrate space during truncation
btrfs: do not BUG_ON on failure to get dir index for new snapshot
btrfs: send: do not BUG_ON() on unexpected symlink data extent
btrfs: do not BUG_ON() when dropping inode items from log root
btrfs: replace BUG_ON() at split_item() with proper error handling
btrfs: do not BUG_ON() on tree mod log failures at btrfs_del_ptr()
btrfs: do not BUG_ON() on tree mod log failures at insert_ptr()
btrfs: do not BUG_ON() on tree mod log failure at insert_new_root()
btrfs: do not BUG_ON() on tree mod log failures at push_nodes_for_insert()
btrfs: abort transaction at update_ref_for_cow() when ref count is zero
...
- Modify the synchronous direct write path to use iomap instead of
manually coding issuing zone append write BIOs, from me.
- Use the FMODE_CAN_ODIRECT file flag to indicate support from direct
IO instead of using the old way with noop direct_io methods, from
Christoph.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZJmJMQAKCRDdoc3SxdoY
dqN9AQDYcY/WzK3eZWqgseXOoLBLibpCRE+SjoMFp4/hN47BDAD+I6owLtp3zyLi
1+Wcdlsdr/i2NEsSfbYDUPI/33xlTww=
=mj70
-----END PGP SIGNATURE-----
Merge tag 'zonefs-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs updates from Damien Le Moal:
- Modify the synchronous direct write path to use iomap instead of
manually coding issuing zone append write BIOs (me)
- Use the FMODE_CAN_ODIRECT file flag to indicate support from direct
IO instead of using the old way with noop direct_io methods
(Christoph)
* tag 'zonefs-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
zonefs: use iomap for synchronous direct writes
- Fix rare I/O hang on deduplicated compressed images due to loop
hooked chains;
- Fix compact compression layout of 16k blocks on arm64 devices;
- Fix atomic context detection of async decompression;
- Decompression/Xattr code cleanups.
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCZJjfSREceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBPXVAQCQqmieRIbW84N6l4eonzoljoxRLCeDsjEn
R0qTaT66GQEA3ZZvwFPmuOgdSGadsvradYdLuL389U5y12P3l0BwRwY=
=ffx+
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"No outstanding new feature for this cycle.
Most of these commits are decompression cleanups which are part of the
ongoing development for subpage/folio compression support as well as
xattr cleanups for the upcoming xattr bloom filter optimization [1].
In addition, there are bugfixes to address some corner cases of
compressed images due to global data de-duplication and arm64 16k
pages.
Summary:
- Fix rare I/O hang on deduplicated compressed images due to loop
hooked chains
- Fix compact compression layout of 16k blocks on arm64 devices
- Fix atomic context detection of async decompression
- Decompression/Xattr code cleanups"
Link: https://lore.kernel.org/r/20230621083209.116024-1-jefflexu@linux.alibaba.com [1]
* tag 'erofs-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: clean up zmap.c
erofs: remove unnecessary goto
erofs: Fix detection of atomic context
erofs: use separate xattr parsers for listxattr/getxattr
erofs: unify inline/shared xattr iterators for listxattr/getxattr
erofs: make the size of read data stored in buffer_ofs
erofs: unify xattr_iter structures
erofs: use absolute position in xattr iterator
erofs: fix compact 4B support for 16k block size
erofs: convert erofs_read_metabuf() to erofs_bread() for xattr
erofs: use poison pointer to replace the hard-coded address
erofs: use struct lockref to replace handcrafted approach
erofs: adapt managed inode operations into folios
erofs: kill hooked chains to avoid loops on deduplicated compressed images
erofs: avoid on-stack pagepool directly passed by arguments
erofs: allocate extra bvec pages directly instead of retrying
erofs: clean up z_erofs_pcluster_readmore()
erofs: remove the member readahead from struct z_erofs_decompress_frontend
erofs: fold in z_erofs_decompress()
Several updates for fs/verity/:
- Do all hashing with the shash API instead of with the ahash API. This
simplifies the code and reduces API overhead. It should also make
things slightly easier for XFS's upcoming support for fsverity. It
does drop fsverity's support for off-CPU hash accelerators, but that
support was incomplete and not known to be used.
- Update and export fsverity_get_digest() so that it's ready for
overlayfs's upcoming support for fsverity checking of lowerdata.
- Improve the documentation for builtin signature support.
- Fix a bug in the large folio support.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZJjsWRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK0IsAQCZ9ZP2U0DqLKV025LzcU9epUdS30xJ
U7WOs8gP63pH4QEAqbU1O6bVhEzdFWGzq5gdzdLePWjOyHrGCVcR2u+fgw4=
=ptAR
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity updates from Eric Biggers:
"Several updates for fs/verity/:
- Do all hashing with the shash API instead of with the ahash API.
This simplifies the code and reduces API overhead. It should also
make things slightly easier for XFS's upcoming support for
fsverity. It does drop fsverity's support for off-CPU hash
accelerators, but that support was incomplete and not known to be
used
- Update and export fsverity_get_digest() so that it's ready for
overlayfs's upcoming support for fsverity checking of lowerdata
- Improve the documentation for builtin signature support
- Fix a bug in the large folio support"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: improve documentation for builtin signature support
fsverity: rework fsverity_get_digest() again
fsverity: simplify error handling in verify_data_block()
fsverity: don't use bio_first_page_all() in fsverity_verify_bio()
fsverity: constify fsverity_hash_alg
fsverity: use shash API instead of ahash API
Just one flex array conversion patch.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZJjnMhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK5UTAP97F43BucDp2X1Yq27phZBGGNMuZBDV
0wFxpW7IDC1WHQD+N9HQmxv+euDHD0elSf/fHWcsLuvApJA/6NTY8YDuugo=
=Oy2c
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt update from Eric Biggers:
"Just one flex array conversion patch"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: Replace 1-element array with flexible array
Fixes and clean-ups include:
- Clean-ups in the READ path in anticipation of MSG_SPLICE_PAGES
- Better NUMA awareness when allocating pages and other objects
- A number of minor clean-ups to XDR encoding
- Elimination of a race when accepting a TCP socket
- Numerous observability enhancements
-----BEGIN PGP SIGNATURE-----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=1EQc
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
- Clean-ups in the READ path in anticipation of MSG_SPLICE_PAGES
- Better NUMA awareness when allocating pages and other objects
- A number of minor clean-ups to XDR encoding
- Elimination of a race when accepting a TCP socket
- Numerous observability enhancements
* tag 'nfsd-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (46 commits)
nfsd: remove redundant assignments to variable len
svcrdma: Fix stale comment
NFSD: Distinguish per-net namespace initialization
nfsd: move init of percpu reply_cache_stats counters back to nfsd_init_net
SUNRPC: Address RCU warning in net/sunrpc/svc.c
SUNRPC: Use sysfs_emit in place of strlcpy/sprintf
SUNRPC: Remove transport class dprintk call sites
SUNRPC: Fix comments for transport class registration
svcrdma: Remove an unused argument from __svc_rdma_put_rw_ctxt()
svcrdma: trace cc_release calls
svcrdma: Convert "might sleep" comment into a code annotation
NFSD: Add an nfsd4_encode_nfstime4() helper
SUNRPC: Move initialization of rq_stime
SUNRPC: Optimize page release in svc_rdma_sendto()
svcrdma: Prevent page release when nothing was received
svcrdma: Revert 2a1e4f21d8 ("svcrdma: Normalize Send page handling")
SUNRPC: Revert 579900670a ("svcrdma: Remove unused sc_pages field")
SUNRPC: Revert cc93ce9529 ("svcrdma: Retain the page backing rq_res.head[0].iov_base")
NFSD: add encoding of op_recall flag for write delegation
NFSD: Add "official" reviewers for this subsystem
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZJU3/AAKCRCRxhvAZXjc
ov1bAQDT+i3l8jS+r1HGVBuZHz2bPPkrk3ch+xGU9V/iBhrGtAD7BaogZ5OaeJP0
A1CQecON51Tq79Nw+EgEBLcRJ/xhXAQ=
=v3md
-----END PGP SIGNATURE-----
Merge tag 'v6.5/vfs.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains the work to extend move_mount() to allow adding a mount
beneath the topmost mount of a mount stack.
There are two LWN articles about this. One covers the original patch
series in [1]. The other in [2] summarizes the session and roughly the
discussion between Al and me at LSFMM. The second article also goes
into some good questions from attendees.
Since all details are found in the relevant commit with a technical
dive into semantics and locking at the end I'm only adding the
motivation and core functionality for this from commit message and
leave out the invasive details. The code is also heavily commented and
annotated as well which was explicitly requested.
TL;DR:
> mount -t ext4 /dev/sda /mnt
|
└─/mnt /dev/sda ext4
> mount --beneath -t xfs /dev/sdb /mnt
|
└─/mnt /dev/sdb xfs
└─/mnt /dev/sda ext4
> umount /mnt
|
└─/mnt /dev/sdb xfs
The longer motivation is that various distributions are adding or are
in the process of adding support for system extensions and in the
future configuration extensions through various tools. A more detailed
explanation on system and configuration extensions can be found on the
manpage which is listed below at [3].
System extension images may – dynamically at runtime — extend the
/usr/ and /opt/ directory hierarchies with additional files. This is
particularly useful on immutable system images where a /usr/ and/or
/opt/ hierarchy residing on a read-only file system shall be extended
temporarily at runtime without making any persistent modifications.
When one or more system extension images are activated, their /usr/
and /opt/ hierarchies are combined via overlayfs with the same
hierarchies of the host OS, and the host /usr/ and /opt/ overmounted
with it ("merging"). When they are deactivated, the mount point is
disassembled — again revealing the unmodified original host version of
the hierarchy ("unmerging"). Merging thus makes the extension's
resources suddenly appear below the /usr/ and /opt/ hierarchies as if
they were included in the base OS image itself. Unmerging makes them
disappear again, leaving in place only the files that were shipped
with the base OS image itself.
System configuration images are similar but operate on directories
containing system or service configuration.
On nearly all modern distributions mount propagation plays a crucial
role and the rootfs of the OS is a shared mount in a peer group
(usually with peer group id 1):
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/ / ext4 shared:1 29 1
On such systems all services and containers run in a separate mount
namespace and are pivot_root()ed into their rootfs. A separate mount
namespace is almost always used as it is the minimal isolation
mechanism services have. But usually they are even much more isolated
up to the point where they almost become indistinguishable from
containers.
Mount propagation again plays a crucial role here. The rootfs of all
these services is a slave mount to the peer group of the host rootfs.
This is done so the service will receive mount propagation events from
the host when certain files or directories are updated.
In addition, the rootfs of each service, container, and sandbox is
also a shared mount in its separate peer group:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/ / ext4 shared:24 master:1 71 47
For people not too familiar with mount propagation, the master:1 means
that this is a slave mount to peer group 1. Which as one can see is
the host rootfs as indicated by shared:1 above. The shared:24
indicates that the service rootfs is a shared mount in a separate peer
group with peer group id 24.
A service may run other services. Such nested services will also have
a rootfs mount that is a slave to the peer group of the outer service
rootfs mount.
For containers things are just slighly different. A container's rootfs
isn't a slave to the service's or host rootfs' peer group. The rootfs
mount of a container is simply a shared mount in its own peer group:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/home/ubuntu/debian-tree / ext4 shared:99 61 60
So whereas services are isolated OS components a container is treated
like a separate world and mount propagation into it is restricted to a
single well known mount that is a slave to the peer group of the
shared mount /run on the host:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/propagate/debian-tree /run/host/incoming tmpfs master:5 71 68
Here, the master:5 indicates that this mount is a slave to the peer
group with peer group id 5. This allows to propagate mounts into the
container and served as a workaround for not being able to insert
mounts into mount namespaces directly. But the new mount api does
support inserting mounts directly. For the interested reader the
blogpost in [4] might be worth reading where I explain the old and the
new approach to inserting mounts into mount namespaces.
Containers of course, can themselves be run as services. They often
run full systems themselves which means they again run services and
containers with the exact same propagation settings explained above.
The whole system is designed so that it can be easily updated,
including all services in various fine-grained ways without having to
enter every single service's mount namespace which would be
prohibitively expensive. The mount propagation layout has been
carefully chosen so it is possible to propagate updates for system
extensions and configurations from the host into all services.
The simplest model to update the whole system is to mount on top of
/usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc
will then propagate into every service. This works cleanly the first
time. However, when the system is updated multiple times it becomes
necessary to unmount the first update on /opt, /usr, /etc and then
propagate the new update. But this means, there's an interval where
the old base system is accessible. This has to be avoided to protect
against downgrade attacks.
The vfs already exposes a mechanism to userspace whereby mounts can be
mounted beneath an existing mount. Such mounts are internally referred
to as "tucked". The patch series exposes the ability to mount beneath
a top mount through the new MOVE_MOUNT_BENEATH flag for the
move_mount() system call. This allows userspace to seamlessly upgrade
mounts. After this series the only thing that will have changed is
that mounting beneath an existing mount can be done explicitly instead
of just implicitly.
The crux is that the proposed mechanism already exists and that it is
so powerful as to cover cases where mounts are supposed to be updated
with new versions. Crucially, it offers an important flexibility.
Namely that updates to a system may either be forced or can be delayed
and the umount of the top mount be left to a service if it is a
cooperative one"
Link: https://lwn.net/Articles/927491 [1]
Link: https://lwn.net/Articles/934094 [2]
Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [3]
Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [4]
Link: https://github.com/flatcar/sysext-bakery
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2
Link: https://github.com/systemd/systemd/pull/26013
* tag 'v6.5/vfs.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: allow to mount beneath top mount
fs: use a for loop when locking a mount
fs: properly document __lookup_mnt()
fs: add path_mounted()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZJU4WgAKCRCRxhvAZXjc
oofvAQDs9RJwQUyWHJmQA+tWz5cUE5DviVWCwwul5dQRRCqgaQEA2OIO0gPFaVoq
1OYOeLyUjl/cpS8e3u4uJtw34jttdQA=
=AwcR
-----END PGP SIGNATURE-----
Merge tag 'v6.5/vfs.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file handling updates from Christian Brauner:
"This contains Amir's work to fix a long-standing problem where an
unprivileged overlayfs mount can be used to avoid fanotify permission
events that were requested for an inode or superblock on the
underlying filesystem.
Some background about files opened in overlayfs. If a file is opened
in overlayfs @file->f_path will refer to a "fake" path. What this
means is that while @file->f_inode will refer to inode of the
underlying layer, @file->f_path refers to an overlayfs
{dentry,vfsmount} pair. The reasons for doing this are out of scope
here but it is the reason why the vfs has been providing the
open_with_fake_path() helper for overlayfs for very long time now. So
nothing new here.
This is for sure not very elegant and everyone including the overlayfs
maintainers agree. Improving this significantly would involve more
fragile and potentially rather invasive changes.
In various codepaths access to the path of the underlying filesystem
is needed for such hybrid file. The best example is fsnotify where
this becomes security relevant. Passing the overlayfs
@file->f_path->dentry will cause fsnotify to skip generating fsnotify
events registered on the underlying inode or superblock.
To fix this we extend the vfs provided open_with_fake_path() concept
for overlayfs to create a backing file container that holds the real
path and to expose a helper that can be used by relevant callers to
get access to the path of the underlying filesystem through the new
file_real_path() helper. This pattern is similar to what we do in
d_real() and d_real_inode().
The first beneficiary is fsnotify and fixes the security sensitive
problem mentioned above.
There's a couple of nice cleanups included as well.
Over time, the old open_with_fake_path() helper added specifically for
overlayfs a long time ago started to get used in other places such as
cachefiles. Even though cachefiles have nothing to do with hybrid
files.
The only reason cachefiles used that concept was that files opened
with open_with_fake_path() aren't charged against the caller's open
file limit by raising FMODE_NOACCOUNT. It's just mere coincidence that
both overlayfs and cachefiles need to ensure to not overcharge the
caller for their internal open calls.
So this work disentangles FMODE_NOACCOUNT use cases and backing file
use-cases by adding the FMODE_BACKING flag which indicates that the
file can be used to retrieve the backing file of another filesystem.
(Fyi, Jens will be sending you a really nice cleanup from Christoph
that gets rid of 3 FMODE_* flags otherwise this would be the last
fmode_t bit we'd be using.)
So now overlayfs becomes the sole user of the renamed
open_with_fake_path() helper which is now named backing_file_open().
For internal kernel users such as cachefiles that are only interested
in FMODE_NOACCOUNT but not in FMODE_BACKING we add a new
kernel_file_open() helper which opens a file without being charged
against the caller's open file limit. All new helpers are properly
documented and clearly annotated to mention their special uses.
We also rename vfs_tmpfile_open() to kernel_tmpfile_open() to clearly
distinguish it from vfs_tmpfile() and align it the other kernel_*()
internal helpers"
* tag 'v6.5/vfs.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ovl: enable fsnotify events on underlying real files
fs: use backing_file container for internal files with "fake" f_path
fs: move kmem_cache_zalloc() into alloc_empty_file*() helpers
fs: use a helper for opening kernel internal files
fs: rename {vfs,kernel}_tmpfile_open()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZJU4NwAKCRCRxhvAZXjc
ordqAP0RmZEkUA5p98pK+0FEFIsS2S8qChh6YHQHP+hF606FGgEAivb3UPRm9p58
kRb5yK0/oXDUxGv7A+x+SIMVbcRyLgw=
=pi6N
-----END PGP SIGNATURE-----
Merge tag 'v6.5/vfs.rename.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rename locking updates from Christian Brauner:
"This contains the work from Jan to fix problems with cross-directory
renames originally reported in [1].
To quickly sum it up some filesystems (so far we know at least about
ext4, udf, f2fs, ocfs2, likely also reiserfs, gfs2 and others) need to
lock the directory when it is being renamed into another directory.
This is because we need to update the parent pointer in the directory
in that case and if that races with other operations on the directory,
in particular a conversion from one directory format into another, bad
things can happen.
So far we've done the locking in the filesystem code but recently
Darrick pointed out in [2] that the RENAME_EXCHANGE case was missing.
That one is particularly nasty because RENAME_EXCHANGE can arbitrarily
mix regular files and directories and proper lock ordering is not
achievable in the filesystems alone.
This patch set adds locking into vfs_rename() so that not only parent
directories but also moved inodes, regardless of whether they are
directories or not, are locked when calling into the filesystem.
This means establishing a locking order for unrelated directories. New
helpers are added for this purpose and our documentation is updated to
cover this in detail.
The locking is now actually easier to follow as we now always lock
source and target. We've always locked the target independent of
whether it was a directory or file and we've always locked source if
it was a regular file. The exact details for why this came about can
be found in [3] and [4]"
Link: https://lore.kernel.org/all/20230117123735.un7wbamlbdihninm@quack3 [1]
Link: https://lore.kernel.org/all/20230517045836.GA11594@frogsfrogsfrogs [2]
Link: https://lore.kernel.org/all/20230526-schrebergarten-vortag-9cd89694517e@brauner [3]
Link: https://lore.kernel.org/all/20230530-seenotrettung-allrad-44f4b00139d4@brauner [4]
* tag 'v6.5/vfs.rename.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Restrict lock_two_nondirectories() to non-directory inodes
fs: Lock moved directories
fs: Establish locking order for unrelated directories
Revert "f2fs: fix potential corruption when moving a directory"
Revert "udf: Protect rename against modification of moved directory"
ext4: Remove ext4 locking of moved directory
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZJU4SwAKCRCRxhvAZXjc
ojOTAP9gT/z1gasIf8OwDHb4inZGnVpHh2ApKLvgMXH6ICtwRgD+OBtOcf438Lx1
cpFSTVJlh21QXMOOXWHe/LRUV2kZ5wI=
=zdfx
-----END PGP SIGNATURE-----
Merge tag 'v6.5/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Miscellaneous features, cleanups, and fixes for vfs and individual fs
Features:
- Use mode 0600 for file created by cachefilesd so it can be run by
unprivileged users. This aligns them with directories which are
already created with mode 0700 by cachefilesd
- Reorder a few members in struct file to prevent some false sharing
scenarios
- Indicate that an eventfd is used a semaphore in the eventfd's
fdinfo procfs file
- Add a missing uapi header for eventfd exposing relevant uapi
defines
- Let the VFS protect transitions of a superblock from read-only to
read-write in addition to the protection it already provides for
transitions from read-write to read-only. Protecting read-only to
read-write transitions allows filesystems such as ext4 to perform
internal writes, keeping writers away until the transition is
completed
Cleanups:
- Arnd removed the architecture specific arch_report_meminfo()
prototypes and added a generic one into procfs.h. Note, we got a
report about a warning in amdpgpu codepaths that suggested this was
bisectable to this change but we concluded it was a false positive
- Remove unused parameters from split_fs_names()
- Rename put_and_unmap_page() to unmap_and_put_page() to let the name
reflect the order of the cleanup operation that has to unmap before
the actual put
- Unexport buffer_check_dirty_writeback() as it is not used outside
of block device aops
- Stop allocating aio rings from highmem
- Protecting read-{only,write} transitions in the VFS used open-coded
barriers in various places. Replace them with proper little helpers
and document both the helpers and all barrier interactions involved
when transitioning between read-{only,write} states
- Use flexible array members in old readdir codepaths
Fixes:
- Use the correct type __poll_t for epoll and eventfd
- Replace all deprecated strlcpy() invocations, whose return value
isn't checked with an equivalent strscpy() call
- Fix some kernel-doc warnings in fs/open.c
- Reduce the stack usage in jffs2's xattr codepaths finally getting
rid of this: fs/jffs2/xattr.c:887:1: error: the frame size of 1088
bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
royally annoying compilation warning
- Use __FMODE_NONOTIFY instead of FMODE_NONOTIFY where an int and not
fmode_t is required to avoid fmode_t to integer degradation
warnings
- Create coredumps with O_WRONLY instead of O_RDWR. There's a long
explanation in that commit how O_RDWR is actually a bug which we
found out with the help of Linus and git archeology
- Fix "no previous prototype" warnings in the pipe codepaths
- Add overflow calculations for remap_verify_area() as a signed
addition overflow could be triggered in xfstests
- Fix a null pointer dereference in sysv
- Use an unsigned variable for length calculations in jfs avoiding
compilation warnings with gcc 13
- Fix a dangling pipe pointer in the watch queue codepath
- The legacy mount option parser provided as a fallback by the VFS
for filesystems not yet converted to the new mount api did prefix
the generated mount option string with a leading ',' causing issues
for some filesystems
- Fix a repeated word in a comment in fs.h
- autofs: Update the ctime when mtime is updated as mandated by
POSIX"
* tag 'v6.5/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
readdir: Replace one-element arrays with flexible-array members
fs: Provide helpers for manipulating sb->s_readonly_remount
fs: Protect reconfiguration of sb read-write from racing writes
eventfd: add a uapi header for eventfd userspace APIs
autofs: set ctime as well when mtime changes on a dir
eventfd: show the EFD_SEMAPHORE flag in fdinfo
fs/aio: Stop allocating aio rings from HIGHMEM
fs: Fix comment typo
fs: unexport buffer_check_dirty_writeback
fs: avoid empty option when generating legacy mount string
watch_queue: prevent dangling pipe pointer
fs.h: Optimize file struct to prevent false sharing
highmem: Rename put_and_unmap_page() to unmap_and_put_page()
cachefiles: Allow the cache to be non-root
init: remove unused names parameter in split_fs_names()
jfs: Use unsigned variable for length calculations
fs/sysv: Null check to prevent null-ptr-deref bug
fs: use UB-safe check for signed addition overflow in remap_verify_area
procfs: consolidate arch_report_meminfo declaration
fs: pipe: reveal missing function protoypes
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZJU4DAAKCRCRxhvAZXjc
oi8dAP9Rxv13trPMEFB1aJ3YHIMYRKSlG81vNJo+5ur43RFc4gD+NJBBYSb7bMYu
V8uIKnyFfMtLtHZA9M00Xqipq/sLDA4=
=C0YR
-----END PGP SIGNATURE-----
Merge tag 'v6.5/fs.ntfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull ntfs updates from Christian Brauner:
"A pile of various smaller fixes for ntfs"
* tag 'v6.5/fs.ntfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ntfs: do not dereference a null ctx on error
ntfs: Remove unneeded semicolon
ntfs: Correct spelling
ntfs: remove redundant initialization to pointer cb_sb_start
When multiple processes mmap() a dax file, then at some point,
a process issues a 'load' and consumes a hwpoison, the process
receives a SIGBUS with si_code = BUS_MCEERR_AR and with si_lsb
set for the poison scope. Soon after, any other process issues
a 'load' to the poisoned page (that is unmapped from the kernel
side by memory_failure), it receives a SIGBUS with
si_code = BUS_ADRERR and without valid si_lsb.
This is confusing to user, and is different from page fault due
to poison in RAM memory, also some helpful information is lost.
Channel dax backend driver's poison detection to the filesystem
such that instead of reporting VM_FAULT_SIGBUS, it could report
VM_FAULT_HWPOISON.
If user level block IO syscalls fail due to poison, the errno will
be converted to EIO to maintain block API consistency.
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/20230615181325.1327259-2-jane.chu@oracle.com
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
This patch remove unneeded page uptodate check/set in
f2fs_vm_page_mkwrite, which already done in set_page_dirty.
Signed-off-by: Yunlei He <heyunlei@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Mtime and ctime stay old value without update after move
file range ioctl. This patch add time update.
Signed-off-by: Yunlei He <heyunlei@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Let's compress tmp files for the given extension list.
This patch does not change the previous behavior, but allow the cases as below.
Extention example: "ext"
- abc.ext : allow
- abc.ext.abc : allow
- abc.extm : not allow
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch provides a large number of variants of F2FS_RW_ATTR
and F2FS_RO_ATTR macros, reducing the number of parameters required
to initialize the f2fs_attr structure.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304152234.wjaY3IYm-lkp@intel.com/
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
F2FS_I_SB(inode) is redundant.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The assignment to variable err is redundant since the code jumps to
label next and err is then re-assigned a new value on the call to
sanity_check_node_chain. Remove the assignment.
Cleans up clang scan build warning:
fs/f2fs/recovery.c:464:6: warning: Value stored to 'err' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If there're huge # of small discards, this will increase checkpoint latency
insanely. Let's issue small discards only by trim.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We don't need to report an issue, when the zone write pointer already
points to the end of the zone, since the zone mismatch is already taken
care.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds f2fs_ioc_get_compress_blocks() to provide a common
f2fs_get_compress_blocks().
Signed-off-by: Sheng Yong <shengyong@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a helper function to check if compression level is
valid.
Signed-off-by: Sheng Yong <shengyong@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since commit a2ad63daa8 ("VFS: add FMODE_CAN_ODIRECT file flag") file
systems can just set the FMODE_CAN_ODIRECT flag at open time instead of
wiring up a dummy direct_IO method to indicate support for direct I/O.
Do that for f2fs so that noop_direct_IO can eventually be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are several issues in sanity_check_inode():
- The code looks not clean, it checks extra_attr related condition
dispersively.
- It missed to check i_extra_isize w/ lower boundary
- It missed to check feature dependency: prjquota, inode_chksum,
inode_crtime, compression features rely on extra_attr feature.
- It's not necessary to check i_extra_isize due to it will only
be assigned to non-zero value if f2fs_has_extra_attr() is true
in do_read_inode().
Fix them all in this patch.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The last valid compress related field is i_compress_flag, check its
validity instead of i_log_cluster_size.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit 3fde13f817 ("f2fs: compress: support compress level")
forgot to do basic compress level check, let's add it.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds F2FS_QUOTA_DEFAULT_FL to include two default flags:
F2FS_NOATIME_FL and F2FS_IMMUTABLE_FL, and use it to clean up codes.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
freeze_super() can fail, it needs to check its return value and do
error handling in f2fs_resize_fs().
Fixes: 04f0b2eaa3 ("f2fs: ioctl for removing a range from F2FS")
Fixes: b4b10061ef ("f2fs: refactor resize_fs to avoid meta updates in progress")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct smb_negotiate_req.
This results in no differences in binary output.
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/317
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch add the compound request handling to the some commands.
Existing clients do not send these commands as compound requests,
but ksmbd should consider that they may come.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd does not consider the case of that smb2 session setup is
in compound request. If this is the second payload of the compound,
OOB read issue occurs while processing the first payload in
the smb2_sess_setup().
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21355
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It would be better to replace the traditional ternary conditional
operator with min() in compare_sids.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use kvzalloc instead of kvmalloc.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The return value of ksmbd_vfs_query_maximal_access is meaningless,
it is better to modify it to void.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Return a literal instead of 'err' in ksmbd_vfs_kern_path_locked().
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use kzalloc() instead of __GFP_ZERO.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Switch ocfs2 from using sendpage() to using sendmsg() + MSG_SPLICE_PAGES so
that sendpage can be phased out.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Mark Fasheh <mark@fasheh.com>
cc: Joel Becker <jlbec@evilplan.org>
cc: Joseph Qi <joseph.qi@linux.alibaba.com>
cc: ocfs2-devel@oss.oracle.com
Link: https://lore.kernel.org/r/20230623225513.2732256-15-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ocfs2 uses kzalloc() to allocate buffers for o2net_hand, o2net_keep_req and
o2net_keep_resp and then passes these to sendpage. This isn't really
allowed as the lifetime of slab objects is not controlled by page ref -
though in this case it will probably work. sendmsg() with MSG_SPLICE_PAGES
will, however, print a warning and give an error.
Fix it to use folio_alloc() instead to allocate a buffer for the handshake
message, keepalive request and reply messages.
Fixes: 98211489d4 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Mark Fasheh <mark@fasheh.com>
cc: Kurt Hackel <kurt.hackel@oracle.com>
cc: Joel Becker <jlbec@evilplan.org>
cc: Joseph Qi <joseph.qi@linux.alibaba.com>
cc: ocfs2-devel@oss.oracle.com
Link: https://lore.kernel.org/r/20230623225513.2732256-14-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When transmitting data, call down a layer using a single sendmsg with
MSG_SPLICE_PAGES to indicate that content should be spliced rather using
sendpage. This allows ->sendpage() to be replaced by something that can
handle multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christine Caulfield <ccaulfie@redhat.com>
cc: David Teigland <teigland@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: cluster-devel@redhat.com
Link: https://lore.kernel.org/r/20230623225513.2732256-7-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a small step towards a model where GUP itself would not expand
the stack, and any user that needs GUP to not look up existing mappings,
but actually expand on them, would have to do so manually before-hand,
and with the mm lock held for writing.
It turns out that execve() already did almost exactly that, except it
didn't take the mm lock at all (it's single-threaded so no locking
technically needed, but it could cause lockdep errors). And it only did
it for the CONFIG_STACK_GROWSUP case, since in that case GUP has
obviously never expanded the stack downwards.
So just make that CONFIG_STACK_GROWSUP case do the right thing with
locking, and enable it generally. This will eventually help GUP, and in
the meantime avoids a special case and the lockdep issue.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make calls to extend_vma() and find_extend_vma() fail if the write lock
is required.
To avoid making this a flag-day event, this still allows the old
read-locking case for the trivial situations, and passes in a flag to
say "is it write-locked". That way write-lockers can say "yes, I'm
being careful", and legacy users will continue to work in all the common
cases until they have been fully converted to the new world order.
Co-Developed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Variable bit_off is being assigned a value that is never read, it is being
re-assigned a new value in the following while loop. Remove the
assignment. Cleans up clang scan build warning:
fs/ocfs2/localalloc.c:976:18: warning: Although the value stored to
'bit_off' is used in the enclosing expression, the value is never
actually read from 'bit_off' [deadcode.DeadStores]
Link: https://lkml.kernel.org/r/20230622102736.2831126-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During the seq_printf,the mmap_sem_read_lock protection is not
required.
Link: https://lkml.kernel.org/r/20230622040152.1173-1-lipeifeng@oppo.com
Signed-off-by: lipeifeng <lipeifeng@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ackerley Tng reported an issue with hugetlbfs fallocate as noted in the
Closes tag. The issue showed up after the conversion of hugetlb page
cache lookup code to use page_cache_next_miss. User visible effects are:
- hugetlbfs fallocate incorrectly returns -EEXIST if pages are presnet
in the file.
- hugetlb pages will not be included in core dumps if they need to be
brought in via GUP.
- userfaultfd UFFDIO_COPY will not notice pages already present in the
cache. It may try to allocate a new page and potentially return
ENOMEM as opposed to EEXIST.
Revert the use page_cache_next_miss() in hugetlb code.
IMPORTANT NOTE FOR STABLE BACKPORTS:
This patch will apply cleanly to v6.3. However, due to the change of
filemap_get_folio() return values, it will not function correctly. This
patch must be modified for stable backports.
[dan.carpenter@linaro.org: fix hugetlbfs_pagecache_present()]
Link: https://lkml.kernel.org/r/efa86091-6a2c-4064-8f55-9b44e1313015@moroto.mountain
Link: https://lkml.kernel.org/r/20230621212403.174710-2-mike.kravetz@oracle.com
Fixes: d0ce0e47b3 ("mm/hugetlb: convert hugetlb fault paths to use alloc_hugetlb_folio()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reported-by: Ackerley Tng <ackerleytng@google.com>
Closes: https://lore.kernel.org/linux-mm/cover.1683069252.git.ackerleytng@google.com
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=jy/9
-----END PGP SIGNATURE-----
Merge tag 'for-6.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"Unfortunately the recent u32 overflow fix was not complete, there was
one conversion left, assertion not triggered by my tests but caught by
Qu's fstests case.
The "cleanup for later" has been promoted to a proper fix and wraps
all uses of the stripe left shift so the diffstat has grown but leaves
no potentially problematic uses.
We should have done it that way before, sorry"
* tag 'for-6.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix remaining u32 overflows when left shifting stripe_nr
ext4_blkdev_remove() passes a wrong holder pointer to blkdev_put() which
triggers a warning there. Fix it.
Fixes: 2736e8eeb0 ("block: use the holder as indication for exclusive opens")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230622165107.13687-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds a check for read-only mounted filesystem
in txBegin before starting a transaction potentially saving
from NULL pointer deref.
Signed-off-by: Immad Mir <mirimmad17@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Syzkaller reported an issue where txBegin may be called
on a superblock in a read-only mounted filesystem which leads
to NULL pointer deref. This could be solved by checking if
the filesystem is read-only before calling txBegin, and returning
with appropiate error code.
Reported-By: syzbot+f1faa20eec55e0c8644c@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=be7e52c50c5182cc09a09ea6fc456446b2039de3
Signed-off-by: Immad Mir <mirimmad17@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
The variable 'error' is being assigned a value that is never read,
the assignment and the variable and redundant and can be removed.
Cleans up clang scan build warning:
fs/dax.c:1880:10: warning: Although the value stored to 'error' is
used in the enclosing expression, the value is never actually read
from 'error' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20230621130256.2676126-1-colin.i.king@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
There was regression caused by a97699d1d6 ("btrfs: replace
map_lookup->stripe_len by BTRFS_STRIPE_LEN") and supposedly fixed by
a7299a18a1 ("btrfs: fix u32 overflows when left shifting stripe_nr").
To avoid code churn the fix was open coding the type casts but
unfortunately missed one which was still possible to hit [1].
The missing place was assignment of bioc->full_stripe_logical inside
btrfs_map_block().
Fix it by adding a helper that does the safe calculation of the offset
and use it everywhere even though it may not be strictly necessary due
to already using u64 types. This replaces all remaining
"<< BTRFS_STRIPE_LEN_SHIFT" calls.
[1] https://lore.kernel.org/linux-btrfs/20230622065438.86402-1-wqu@suse.com/
Fixes: a7299a18a1 ("btrfs: fix u32 overflows when left shifting stripe_nr")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Several trivial cleanups which aren't quite necessary to split:
- Rename lcluster load functions as well as justify full indexes
since they are typically used for global deduplication for
compressed data;
- Avoid unnecessary lines, comments for simplicity.
No logic changes.
Reviewed-by: Guo Xuenan <guoxuenan@huaweicloud.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230615064421.103178-1-hsiangkao@linux.alibaba.com
Current check for atomic context is not sufficient as
z_erofs_decompressqueue_endio can be called under rcu lock
from blk_mq_flush_plug_list(). See the stacktrace [1]
In such case we should hand off the decompression work for async
processing rather than trying to do sync decompression in current
context. Patch fixes the detection by checking for
rcu_read_lock_any_held() and while at it use more appropriate
!in_task() check than in_atomic().
Background: Historically erofs would always schedule a kworker for
decompression which would incur the scheduling cost regardless of
the context. But z_erofs_decompressqueue_endio() may not always
be in atomic context and we could actually benefit from doing the
decompression in z_erofs_decompressqueue_endio() if we are in
thread context, for example when running with dm-verity.
This optimization was later added in patch [2] which has shown
improvement in performance benchmarks.
==============================================
[1] Problem stacktrace
[name:core&]BUG: sleeping function called from invalid context at kernel/locking/mutex.c:291
[name:core&]in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 1615, name: CpuMonitorServi
[name:core&]preempt_count: 0, expected: 0
[name:core&]RCU nest depth: 1, expected: 0
CPU: 7 PID: 1615 Comm: CpuMonitorServi Tainted: G S W OE 6.1.25-android14-5-maybe-dirty-mainline #1
Hardware name: MT6897 (DT)
Call trace:
dump_backtrace+0x108/0x15c
show_stack+0x20/0x30
dump_stack_lvl+0x6c/0x8c
dump_stack+0x20/0x48
__might_resched+0x1fc/0x308
__might_sleep+0x50/0x88
mutex_lock+0x2c/0x110
z_erofs_decompress_queue+0x11c/0xc10
z_erofs_decompress_kickoff+0x110/0x1a4
z_erofs_decompressqueue_endio+0x154/0x180
bio_endio+0x1b0/0x1d8
__dm_io_complete+0x22c/0x280
clone_endio+0xe4/0x280
bio_endio+0x1b0/0x1d8
blk_update_request+0x138/0x3a4
blk_mq_plug_issue_direct+0xd4/0x19c
blk_mq_flush_plug_list+0x2b0/0x354
__blk_flush_plug+0x110/0x160
blk_finish_plug+0x30/0x4c
read_pages+0x2fc/0x370
page_cache_ra_unbounded+0xa4/0x23c
page_cache_ra_order+0x290/0x320
do_sync_mmap_readahead+0x108/0x2c0
filemap_fault+0x19c/0x52c
__do_fault+0xc4/0x114
handle_mm_fault+0x5b4/0x1168
do_page_fault+0x338/0x4b4
do_translation_fault+0x40/0x60
do_mem_abort+0x60/0xc8
el0_da+0x4c/0xe0
el0t_64_sync_handler+0xd4/0xfc
el0t_64_sync+0x1a0/0x1a4
[2] Link: https://lore.kernel.org/all/20210317035448.13921-1-huangjianan@oppo.com/
Reported-by: Will Shiu <Will.Shiu@mediatek.com>
Suggested-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230621220848.3379029-1-dhavale@google.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
There are a few assignments to variable len where the value is not
being read and so the assignments are redundant and can be removed.
In one case, the variable len can be removed completely. Cleans up
4 clang scan warnings of the form:
fs/nfsd/export.c💯7: warning: Although the value stored to 'len'
is used in the enclosing expression, the value is never actually
read from 'len' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
For filenames that begin with . and are between 2 and 5 characters long,
UDF charset conversion code would read uninitialized memory in the
output buffer. The only practical impact is that the name may be prepended a
"unification hash" when it is not actually needed but still it is good
to fix this.
Reported-by: syzbot+cd311b1e43cc25f90d18@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000e2638a05fe9dc8f9@google.com
Signed-off-by: Jan Kara <jack@suse.cz>
Fuse shouldn't return ENOSYS from its ioctl implementation. If userspace
responds with ENOSYS it should be translated to ENOTTY.
There are two ways to return an error from the IOCTL request:
- fuse_out_header.error
- fuse_ioctl_out.result
Commit 02c0cab8e7 ("fuse: ioctl: translate ENOSYS") already fixed this
issue for the first case, but missed the second case. This patch fixes the
second case.
Reported-by: Jonathan Katz <jkatz@eitmlabs.org>
Closes: https://lore.kernel.org/all/CALKgVmcC1VUV_gJVq70n--omMJZUb4HSh_FqvLTHgNBc+HCLFQ@mail.gmail.com/
Fixes: 02c0cab8e7 ("fuse: ioctl: translate ENOSYS")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element arrays with flexible-array
members in multiple structures.
Address the following -Wstringop-overflow warnings seen when built
m68k architecture with m5307c3_defconfig configuration:
In function '__put_user_fn',
inlined from 'fillonedir' at fs/readdir.c:170:2:
include/asm-generic/uaccess.h:49:35: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
49 | *(u8 __force *)to = *(u8 *)from;
| ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~
fs/readdir.c: In function 'fillonedir':
fs/readdir.c:134:25: note: at offset 1 into destination object 'd_name' of size 1
134 | char d_name[1];
| ^~~~~~
In function '__put_user_fn',
inlined from 'filldir' at fs/readdir.c:257:2:
include/asm-generic/uaccess.h:49:35: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
49 | *(u8 __force *)to = *(u8 *)from;
| ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~
fs/readdir.c: In function 'filldir':
fs/readdir.c:211:25: note: at offset 1 into destination object 'd_name' of size 1
211 | char d_name[1];
| ^~~~~~
This helps with the ongoing efforts to globally enable
-Wstringop-overflow.
This results in no differences in binary output.
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/312
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Message-Id: <ZJHiPJkNKwxkKz1c@work>
Signed-off-by: Christian Brauner <brauner@kernel.org>
fsverity builtin signatures (CONFIG_FS_VERITY_BUILTIN_SIGNATURES) aren't
the only way to do signatures with fsverity, and they have some major
limitations. Yet, more users have tried to use them, e.g. recently by
https://github.com/ostreedev/ostree/pull/2640. In most cases this seems
to be because users aren't sufficiently familiar with the limitations of
this feature and what the alternatives are.
Therefore, make some updates to the documentation to try to clarify the
properties of this feature and nudge users in the right direction.
Note that the Integrity Policy Enforcement (IPE) LSM, which is not yet
upstream, is planned to use the builtin signatures. (This differs from
IMA, which uses its own signature mechanism.) For that reason, my
earlier patch "fsverity: mark builtin signatures as deprecated"
(https://lore.kernel.org/r/20221208033548.122704-1-ebiggers@kernel.org),
which marked builtin signatures as "deprecated", was controversial.
This patch therefore stops short of marking the feature as deprecated.
I've also revised the language to focus on better explaining the feature
and what its alternatives are.
Link: https://lore.kernel.org/r/20230620041937.5809-1-ebiggers@kernel.org
Reviewed-by: Colin Walters <walters@verbum.org>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
This fixes the following warning reported by kernel test robot
fs/smb/client/connect.c:2974 generic_ip_connect() error: we
previously assumed 'socket' could be null (see line 2962)
Link: https://lore.kernel.org/all/202306170124.CtQqzf0I-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This fixes the following warning reported by kernel test robot
fs/smb/client/cifssmb.c:4216 CIFSFindNext() warn: missing error
code? 'rc'
Link: https://lore.kernel.org/all/202306170124.CtQqzf0I-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This fixes the following warning reported by kernel test robot
fs/smb/client/cifssmb.c:4089 CIFSFindFirst() warn: missing error
code? 'rc'
Link: https://lore.kernel.org/all/202306170124.CtQqzf0I-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There were cases reported where servers will sometimes return more
credits than requested on oplock break responses, which can lead to
most of the credits being allocated for oplock breaks (instead of
for normal operations like read and write) if number of SMB3 requests
in flight always stays above 0 (the oplock and echo credits are
rebalanced when in flight requests goes down to zero).
If oplock credits gets unexpectedly large (e.g. three is more than it
would ever be expected to be) and in flight requests are greater than
zero, then rebalance the oplock credits and regular credits (go
back to reserving just one oplock credit).
Signed-off-by: Steve French <stfrench@microsoft.com>
We had seen cases where cifs_invalidate_mapping was logging:
"Could not invalidate inode ..."
if invalidate_inode_pages2 fails but this message does not show what
the rc is. Update the logged message to also log the return code.
Suggested-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This fixes the following warning reported by kernel test robot
fs/smb/client/cifsfs.c:982 cifs_smb3_do_mount() warn: possible
memory leak of 'cifs_sb'
Link: https://lore.kernel.org/all/202306170124.CtQqzf0I-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This includes a wholesale reversion of the post-6.4 series "make slab shrink
lockless". After input from Dave Chinner it has been decided that we
should go a different way. Thread starts at
https://lkml.kernel.org/r/ZH6K0McWBeCjaf16@dread.disaster.area.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJH/qAAKCRDdBJ7gKXxA
jq7uAP9AtDGHfvOuW5jlHdYfpUBnbfuQDKjiik71UuIxyhtwQQEAqpOBv7UDuhHj
NbNIGTIi/xM5vkpjV6CBo9ymR7qTKwo=
=uGuc
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-06-20-12-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"19 hotfixes. 8 of these are cc:stable.
This includes a wholesale reversion of the post-6.4 series 'make slab
shrink lockless'. After input from Dave Chinner it has been decided
that we should go a different way [1]"
Link: https://lkml.kernel.org/r/ZH6K0McWBeCjaf16@dread.disaster.area [1]
* tag 'mm-hotfixes-stable-2023-06-20-12-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: fix cross compilation with LLVM
mailmap: add entries for Ben Dooks
nilfs2: prevent general protection fault in nilfs_clear_dirty_page()
Revert "mm: vmscan: make global slab shrink lockless"
Revert "mm: vmscan: make memcg slab shrink lockless"
Revert "mm: vmscan: add shrinker_srcu_generation"
Revert "mm: shrinkers: make count and scan in shrinker debugfs lockless"
Revert "mm: vmscan: hold write lock to reparent shrinker nr_deferred"
Revert "mm: vmscan: remove shrinker_rwsem from synchronize_shrinkers()"
Revert "mm: shrinkers: convert shrinker_rwsem to mutex"
nilfs2: fix buffer corruption due to concurrent device reads
scripts/gdb: fix SB_* constants parsing
scripts: fix the gfp flags header path in gfp-translate
udmabuf: revert 'Add support for mapping hugepages (v4)'
mm/khugepaged: fix iteration in collapse_file
memfd: check for non-NULL file_seals in memfd_create() syscall
mm/vmalloc: do not output a spurious warning when huge vmalloc() fails
mm/mprotect: fix do_mprotect_pkey() limit check
writeback: fix dereferencing NULL mapping->host on writeback_page_template
-----BEGIN PGP SIGNATURE-----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=IFO0
-----END PGP SIGNATURE-----
Merge tag 'for-6.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more regression fix for an assertion failure that uncovered a
nasty problem with stripe calculations. This is caused by a u32
overflow when there are enough devices. The fstests require 6 so this
hasn't been caught, I was able to hit it with 8.
The fix is minimal and only adds u64 casts, we'll clean that up later.
I did various additional tests to be sure"
* tag 'for-6.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix u32 overflows when left shifting stripe_nr
While trying to fix the jfs UBSAN problem reported in syzkaller,
(https://syzkaller.appspot.com/bug?id=01abadbd6ae6a08b1f1987aa61554c6b3ac19ff2)
I found the typo in the comment of dbInitTree function and fix it.
Signed-off-by: Wonguk Lee <wonguk.lee1023@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
-----BEGIN PGP SIGNATURE-----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=yfOS
-----END PGP SIGNATURE-----
Merge tag '6.4-rc6-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Four smb3 server fixes, all also for stable:
- fix potential oops in parsing compounded requests
- fix various paths (mkdir, create etc) where mnt_want_write was not
checked first
- fix slab out of bounds in check_message and write"
* tag '6.4-rc6-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate session id and tree id in the compound request
ksmbd: fix out-of-bound read in smb2_write
ksmbd: add mnt_want_write to ksmbd vfs functions
ksmbd: validate command payload size
In jfs_dmap.c at line 381, BLKTODMAP is used to get a logical block
number inside dbFree(). db_l2nbperpage, which is the log2 number of
blocks per page, is passed as an argument to BLKTODMAP which uses it
for shifting.
Syzbot reported a shift out-of-bounds crash because db_l2nbperpage is
too big. This happens because the large value is set without any
validation in dbMount() at line 181.
Thus, make sure that db_l2nbperpage is correct while mounting.
Max number of blocks per page = Page size / Min block size
=> log2(Max num_block per page) = log2(Page size / Min block size)
= log2(Page size) - log2(Min block size)
=> Max db_l2nbperpage = L2PSIZE - L2MINBLOCKSIZE
Reported-and-tested-by: syzbot+d2cd27dcf8e04b232eb2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=2a70a453331db32ed491f5cbb07e81bf2d225715
Cc: stable@vger.kernel.org
Suggested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
[BUG]
David reported an ASSERT() get triggered during fio load on 8 devices
with data/raid6 and metadata/raid1c3:
fio --rw=randrw --randrepeat=1 --size=3000m \
--bsrange=512b-64k --bs_unaligned \
--ioengine=libaio --fsync=1024 \
--name=job0 --name=job1 \
The ASSERT() is from rbio_add_bio() of raid56.c:
ASSERT(orig_logical >= full_stripe_start &&
orig_logical + orig_len <= full_stripe_start +
rbio->nr_data * BTRFS_STRIPE_LEN);
Which is checking if the target rbio is crossing the full stripe
boundary.
[100.789] assertion failed: orig_logical >= full_stripe_start && orig_logical + orig_len <= full_stripe_start + rbio->nr_data * BTRFS_STRIPE_LEN, in fs/btrfs/raid56.c:1622
[100.795] ------------[ cut here ]------------
[100.796] kernel BUG at fs/btrfs/raid56.c:1622!
[100.797] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[100.798] CPU: 1 PID: 100 Comm: kworker/u8:4 Not tainted 6.4.0-rc6-default+ #124
[100.799] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014
[100.802] Workqueue: writeback wb_workfn (flush-btrfs-1)
[100.803] RIP: 0010:rbio_add_bio+0x204/0x210 [btrfs]
[100.806] RSP: 0018:ffff888104a8f300 EFLAGS: 00010246
[100.808] RAX: 00000000000000a1 RBX: ffff8881075907e0 RCX: ffffed1020951e01
[100.809] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000001
[100.811] RBP: 0000000141d20000 R08: 0000000000000001 R09: ffff888104a8f04f
[100.813] R10: ffffed1020951e09 R11: 0000000000000003 R12: ffff88810e87f400
[100.815] R13: 0000000041d20000 R14: 0000000144529000 R15: ffff888101524000
[100.817] FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
[100.821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[100.822] CR2: 000055d54e44c270 CR3: 000000010a9a1006 CR4: 00000000003706a0
[100.824] Call Trace:
[100.825] <TASK>
[100.825] ? die+0x32/0x80
[100.826] ? do_trap+0x12d/0x160
[100.827] ? rbio_add_bio+0x204/0x210 [btrfs]
[100.827] ? rbio_add_bio+0x204/0x210 [btrfs]
[100.829] ? do_error_trap+0x90/0x130
[100.830] ? rbio_add_bio+0x204/0x210 [btrfs]
[100.831] ? handle_invalid_op+0x2c/0x30
[100.833] ? rbio_add_bio+0x204/0x210 [btrfs]
[100.835] ? exc_invalid_op+0x29/0x40
[100.836] ? asm_exc_invalid_op+0x16/0x20
[100.837] ? rbio_add_bio+0x204/0x210 [btrfs]
[100.837] raid56_parity_write+0x64/0x270 [btrfs]
[100.838] btrfs_submit_chunk+0x26e/0x800 [btrfs]
[100.840] ? btrfs_bio_init+0x80/0x80 [btrfs]
[100.841] ? release_pages+0x503/0x6d0
[100.842] ? folio_unlock+0x2f/0x60
[100.844] ? __folio_put+0x60/0x60
[100.845] ? btrfs_do_readpage+0xae0/0xae0 [btrfs]
[100.847] btrfs_submit_bio+0x21/0x60 [btrfs]
[100.847] submit_one_bio+0x6a/0xb0 [btrfs]
[100.849] extent_write_cache_pages+0x395/0x680 [btrfs]
[100.850] ? __extent_writepage+0x520/0x520 [btrfs]
[100.851] ? mark_usage+0x190/0x190
[100.852] extent_writepages+0xdb/0x130 [btrfs]
[100.853] ? extent_write_locked_range+0x480/0x480 [btrfs]
[100.854] ? mark_usage+0x190/0x190
[100.854] ? attach_extent_buffer_page+0x220/0x220 [btrfs]
[100.855] ? reacquire_held_locks+0x178/0x280
[100.856] ? writeback_sb_inodes+0x245/0x7f0
[100.857] do_writepages+0x102/0x2e0
[100.858] ? page_writeback_cpu_online+0x10/0x10
[100.859] ? __lock_release.isra.0+0x14a/0x4d0
[100.860] ? reacquire_held_locks+0x280/0x280
[100.861] ? __lock_acquired+0x1e9/0x3d0
[100.862] ? do_raw_spin_lock+0x1b0/0x1b0
[100.863] __writeback_single_inode+0x94/0x450
[100.864] writeback_sb_inodes+0x372/0x7f0
[100.864] ? lock_sync+0xd0/0xd0
[100.865] ? do_raw_spin_unlock+0x93/0xf0
[100.866] ? sync_inode_metadata+0xc0/0xc0
[100.867] ? rwsem_optimistic_spin+0x340/0x340
[100.868] __writeback_inodes_wb+0x70/0x130
[100.869] wb_writeback+0x2d1/0x530
[100.869] ? __writeback_inodes_wb+0x130/0x130
[100.870] ? lockdep_hardirqs_on_prepare.part.0+0xf1/0x1c0
[100.870] wb_do_writeback+0x3eb/0x480
[100.871] ? wb_writeback+0x530/0x530
[100.871] ? mark_lock_irq+0xcd0/0xcd0
[100.872] wb_workfn+0xe0/0x3f0<
[CAUSE]
Commit a97699d1d6 ("btrfs: replace map_lookup->stripe_len by
BTRFS_STRIPE_LEN") changes how we calculate the map length, to reduce
u64 division.
Function btrfs_max_io_len() is to get the length to the stripe boundary.
It calculates the full stripe start offset (inside the chunk) by the
following code:
*full_stripe_start =
rounddown(*stripe_nr, nr_data_stripes(map)) <<
BTRFS_STRIPE_LEN_SHIFT;
The calculation itself is fine, but the value returned by rounddown() is
dependent on both @stripe_nr (which is u32) and nr_data_stripes() (which
returned int).
Thus the result is also u32, then we do the left shift, which can
overflow u32.
If such overflow happens, @full_stripe_start will be a value way smaller
than @offset, causing later "full_stripe_len - (offset -
*full_stripe_start)" to underflow, thus make later length calculation to
have no stripe boundary limit, resulting a write bio to exceed stripe
boundary.
There are some other locations like this, with a u32 @stripe_nr got left
shift, which can lead to a similar overflow.
[FIX]
Fix all @stripe_nr with left shift with a type cast to u64 before the
left shift.
Those involved @stripe_nr or similar variables are recording the stripe
number inside the chunk, which is small enough to be contained by u32,
but their offset inside the chunk can not fit into u32.
Thus for those specific left shifts, a type cast to u64 is necessary so
this patch does not touch them and the code will be cleaned up in the
future to keep the fix minimal.
Reported-by: David Sterba <dsterba@suse.com>
Fixes: a97699d1d6 ("btrfs: replace map_lookup->stripe_len by BTRFS_STRIPE_LEN")
Tested-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using the old mount api to remount an overlayfs superblock via
mount(MS_REMOUNT) all mount options will be silently ignored. For
example, if you create an overlayfs mount:
mount -t overlay overlay -o lowerdir=/mnt/a:/mnt/b,upperdir=/mnt/upper,workdir=/mnt/work /mnt/merged
and then issue a remount via:
# force mount(8) to use mount(2)
export LIBMOUNT_FORCE_MOUNT2=always
mount -t overlay overlay -o remount,WOOTWOOT,lowerdir=/DOESNT-EXIST /mnt/merged
with completely nonsensical mount options whatsoever it will succeed
nonetheless. This prevents us from every changing any mount options we
might introduce in the future that could reasonably be changed during a
remount.
We don't need to carry this issue into the new mount api port. Similar
to FUSE we can use the fs_context::oldapi member to figure out that this
is a request coming through the legacy mount api. If we detect it we
continue silently ignoring all mount options.
But for the new mount api we simply report that mount options cannot
currently be changed. This will allow us to potentially alter mount
properties for new or even old properties. It any case, silently
ignoring everything is not something new apis should do.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
The current way how lowcomms is configured is due configfs entries. Each
comms configfs entry will create a lowcomms connection. Even the local
connection itself will be stored as a lowcomms connection, although most
functionality for a local lowcomms connection struct is not necessary.
Now in some scenarios we will see that dlm_controld reports a -EEXIST
when configure a node via configfs:
... /sys/kernel/config/dlm/cluster/comms/1/addr: write failed: 17 -1
Doing a:
cat /sys/kernel/config/dlm/cluster/comms/1/addr_list
reported nothing. This was being seen on cluster with nodeid 1 and it's
local configuration. To be sure the configfs entries are in sync with
lowcomms connection structures we always call dlm_midcomms_close() to be
sure the lowcomms connection gets removed when the configfs entry gets
dropped.
Before commit 07ee38674a ("fs: dlm: filter ourself midcomms calls") it
was just doing this by accident and the filter by doing:
if (nodeid == dlm_our_nodeid())
return 0;
inside dlm_midcomms_close() was never been hit because drop_comm() sets
local_comm to NULL and cause that dlm_our_nodeid() returns always the
invalid nodeid 0.
Fixes: 07ee38674a ("fs: dlm: filter ourself midcomms calls")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
In journal_init_dev(), if super bdev is used as 'j_dev_bd', then
blkdev_get_by_dev() is called with NULL holder, otherwise, holder will
be journal. However, later in release_journal_dev(), blkdev_put() is
called with journal unconditionally, cause following warning:
WARNING: CPU: 1 PID: 5034 at block/bdev.c:617 bd_end_claim block/bdev.c:617 [inline]
WARNING: CPU: 1 PID: 5034 at block/bdev.c:617 blkdev_put+0x562/0x8a0 block/bdev.c:901
RIP: 0010:blkdev_put+0x562/0x8a0 block/bdev.c:901
Call Trace:
<TASK>
release_journal_dev fs/reiserfs/journal.c:2592 [inline]
free_journal_ram+0x421/0x5c0 fs/reiserfs/journal.c:1896
do_journal_release fs/reiserfs/journal.c:1960 [inline]
journal_release+0x276/0x630 fs/reiserfs/journal.c:1971
reiserfs_put_super+0xe4/0x5c0 fs/reiserfs/super.c:616
generic_shutdown_super+0x158/0x480 fs/super.c:499
kill_block_super+0x64/0xb0 fs/super.c:1422
deactivate_locked_super+0x98/0x160 fs/super.c:330
deactivate_super+0xb1/0xd0 fs/super.c:361
cleanup_mnt+0x2ae/0x3d0 fs/namespace.c:1247
task_work_run+0x16f/0x270 kernel/task_work.c:179
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xadc/0x2a30 kernel/exit.c:874
do_group_exit+0xd4/0x2a0 kernel/exit.c:1024
__do_sys_exit_group kernel/exit.c:1035 [inline]
__se_sys_exit_group kernel/exit.c:1033 [inline]
__x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1033
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fix this problem by passing in NULL holder in this case.
Reported-by: syzbot+04625c80899f4555de39@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=04625c80899f4555de39
Fixes: 2736e8eeb0 ("block: use the holder as indication for exclusive opens")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230620111322.1014775-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provide helpers to set and clear sb->s_readonly_remount including
appropriate memory barriers. Also use this opportunity to document what
the barriers pair with and why they are needed.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Message-Id: <20230620112832.5158-1-jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We ran into issues where mount(8) passed multiple lower layers as one
big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING
option is limited to 256 bytes in strndup_user(). While this would be
fixable by extending the fsconfig() buffer I'd rather encourage users to
append layers via multiple fsconfig() calls as the interface allows
nicely for this. This has also been requested as a feature before.
With this port to the new mount api the following will be possible:
fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0);
/* set upper layer */
fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0);
/* append "/lower2", "/lower3", and "/lower4" */
fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0);
/* turn index feature on */
fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0);
/* append "/lower5" */
fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0);
Specifying ':' would have been rejected so this isn't a regression. And
we can't simply use "lowerdir=/lower" to append on top of existing
layers as "lowerdir=/lower,lowerdir=/other-lower" would make
"/other-lower" the only lower layer so we'd break uapi if we changed
this. So the ':' prefix seems a good compromise.
Users can choose to specify multiple layers at once or individual
layers. A layer is appended if it starts with ":". This requires that
the user has already added at least one layer before. If lowerdir is
specified again without a leading ":" then all previous layers are
dropped and replaced with the new layers. If lowerdir is specified and
empty than all layers are simply dropped.
An additional change is that overlayfs will now parse and resolve layers
right when they are specified in fsconfig() instead of deferring until
super block creation. This allows users to receive early errors.
It also allows users to actually use up to 500 layers something which
was theoretically possible but ended up not working due to the mount
option string passed via mount(2) being too large.
This also allows a more privileged process to set config options for a
lesser privileged process as the creds for fsconfig() and the creds for
fsopen() can differ. We could restrict that they match by enforcing that
the creds of fsopen() and fsconfig() match but I don't see why that
needs to be the case and allows for a good delegation mechanism.
Plus, in the future it means we're able to extend overlayfs mount
options and allow users to specify layers via file descriptors instead
of paths:
fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd);
/* append */
fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd);
/* append */
fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd);
/* clear all layers specified until now */
fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0);
This would be especially nice if users create an overlayfs mount on top
of idmapped layers or just in general private mounts created via
open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear
anywhere in the filesystem. But for now just do the minimal thing.
We should probably aim to move more validation into ovl_fs_parse_param()
so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can
be done in additional patches later.
This is now also rebased on top of the lazy lowerdata lookup which
allows the specificatin of data only layers using the new "::" syntax.
The rules are simple. A data only layers cannot be followed by any
regular layers and data layers must be preceeded by at least one regular
layer.
Parsing the lowerdir mount option must change because of this. The
original patchset used the old lowerdir parsing function to split a
lowerdir mount option string such as:
lowerdir=/lower1:/lower2::/lower3::/lower4
simply replacing each non-escaped ":" by "\0". So sequences of
non-escaped ":" were counted as layers. For example, the previous
lowerdir mount option above would've counted 6 layers instead of 4 and a
lowerdir mount option such as:
lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::"
would be counted as 33 layers. Other than being ugly this didn't matter
much because kern_path() would reject the first "\0" layer. However,
this overcounting of layers becomes problematic when we base allocations
on it where we very much only want to allocate space for 4 layers
instead of 33.
So the new parsing function rejects non-escaped sequences of colons
other than ":" and "::" immediately instead of relying on kern_path().
Link: https://github.com/util-linux/util-linux/issues/2287
Link: https://github.com/util-linux/util-linux/issues/1992
Link: https://bugs.archlinux.org/task/78702
Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Support large folios in block_truncate_page() and avoid three hidden calls
to compound_head().
[willy@infradead.org: fix check of filemap_grab_folio() return value]
Link: https://lkml.kernel.org/r/ZItZOt+XxV12HtzL@casper.infradead.org
Link: https://lkml.kernel.org/r/20230612210141.730128-15-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Saves a call to compound_head() and may be needed to support block size >
PAGE_SIZE.
Link: https://lkml.kernel.org/r/20230612210141.730128-14-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Its one caller already has a folio, so switch it to use the folio API.
Removes a hidden call to compound_head().
Link: https://lkml.kernel.org/r/20230612210141.730128-13-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the folio API and pass the folio from both callers. Saves a hidden
call to compound_head().
Link: https://lkml.kernel.org/r/20230612210141.730128-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Get a folio from the page cache instead of a page, then use the folio API
throughout. Removes a few calls to compound_head() and may be needed to
support block size > PAGE_SIZE.
Link: https://lkml.kernel.org/r/20230612210141.730128-11-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Most of the callers already have a folio; convert reiserfs_write_end() to
have a folio. Removes a couple of hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20230612210141.730128-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This removes a hidden call to compound_head() inside
__block_commit_write() and moves it to those callers which are still page
based. Also make block_write_end() safe for large folios.
Link: https://lkml.kernel.org/r/20230612210141.730128-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If any page in a folio is dirtied, dirty the entire folio. Removes a
number of hidden calls to compound_head() and references to page->mapping
and page->index. Fixes a pre-existing bug where we could mark a folio as
dirty if the file is truncated to a multiple of the page size just as we
take the page fault. I don't believe this bug has any bad effect, it's
just inefficient.
Link: https://lkml.kernel.org/r/20230612210141.730128-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Keep the interface as struct page, but work entirely on the folio
internally. Removes several PAGE_SIZE assumptions and removes some
references to page->index and page->mapping.
Link: https://lkml.kernel.org/r/20230612210141.730128-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We may someday support folios larger than 4GB, so use a size_t for the
byte count within a folio to prevent unpleasant truncations.
Link: https://lkml.kernel.org/r/20230612210141.730128-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove nine hidden calls to compound_head() by using a folio instead of a
page.
Link: https://lkml.kernel.org/r/20230612210141.730128-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add support for large folios and remove some accesses to page->mapping and
page->index.
Link: https://lkml.kernel.org/r/20230612210141.730128-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove a couple of folio->page conversions in the callers, and two calls
to compound_head() in the function itself. Rename it from
__gfs2_jdata_writepage() to __gfs2_jdata_write_folio().
Link: https://lkml.kernel.org/r/20230612210141.730128-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "gfs2/buffer folio changes for 6.5", v3.
This kind of started off as a gfs2 patch series, then became entwined with
buffer heads once I realised that gfs2 was the only remaining caller of
__block_write_full_page(). For those not in the gfs2 world, the big point
of this series is that block_write_full_page() should now handle large
folios correctly.
This patch (of 14):
Replace a few implicit calls to compound_head() with one explicit one.
Link: https://lkml.kernel.org/r/20230612210141.730128-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230612210141.730128-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Android reported a performance regression in the userfaultfd unmap path.
A closer inspection on the userfaultfd_unmap_prep() change showed that a
second tree walk would be necessary in the reworked code.
Fix the regression by passing each VMA that will be unmapped through to
the userfaultfd_unmap_prep() function as they are added to the unmap list,
instead of re-walking the tree for the VMA.
Link: https://lkml.kernel.org/r/20230601015402.2819343-1-Liam.Howlett@oracle.com
Fixes: 69dbe6daf1 ("userfaultfd: use maple tree iterator to iterate VMAs")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of worrying whether the pmd is stable, userfaultfd_must_wait()
call pte_offset_map() as before, but go back to try again if that fails.
Risk of endless loop? It already broke out if pmd_none(), !pmd_present()
or pmd_trans_huge(), and pte_offset_map() would have cleared pmd_bad():
which leaves pmd_devmap(). Presumably pmd_devmap() is inappropriate in a
vma subject to userfaultfd (it would have been mistreated before), but add
a check just to avoid all possibility of endless loop there.
Link: https://lkml.kernel.org/r/54423f-3dff-fd8d-614a-632727cc4cfb@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Simple walk_page_range() users should set ACTION_AGAIN to retry when
pte_offset_map_lock() fails.
No need to check pmd_trans_unstable(): that was precisely to avoid the
possiblity of calling pte_offset_map() on a racily removed or inserted THP
entry, but such cases are now safely handled inside it. Likewise there is
no need to check pmd_none() or pmd_bad() before calling it.
Link: https://lkml.kernel.org/r/c77d9d10-3aad-e3ce-4896-99e91c7947f3@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: SeongJae Park <sj@kernel.org> for mm/damon part
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Song Liu <song@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: allow pte_offset_map[_lock]() to fail", v2.
What is it all about? Some mmap_lock avoidance i.e. latency reduction.
Initially just for the case of collapsing shmem or file pages to THPs; but
likely to be relied upon later in other contexts e.g. freeing of empty
page tables (but that's not work I'm doing). mmap_write_lock avoidance
when collapsing to anon THPs? Perhaps, but again that's not work I've
done: a quick attempt was not as easy as the shmem/file case.
I would much prefer not to have to make these small but wide-ranging
changes for such a niche case; but failed to find another way, and have
heard that shmem MADV_COLLAPSE's usefulness is being limited by that
mmap_write_lock it currently requires.
These changes (though of course not these exact patches) have been in
Google's data centre kernel for three years now: we do rely upon them.
What is this preparatory series about?
The current mmap locking will not be enough to guard against that tricky
transition between pmd entry pointing to page table, and empty pmd entry,
and pmd entry pointing to huge page: pte_offset_map() will have to
validate the pmd entry for itself, returning NULL if no page table is
there. What to do about that varies: sometimes nearby error handling
indicates just to skip it; but in many cases an ACTION_AGAIN or "goto
again" is appropriate (and if that risks an infinite loop, then there must
have been an oops, or pfn 0 mistaken for page table, before).
Given the likely extension to freeing empty page tables, I have not
limited this set of changes to a THP config; and it has been easier, and
sets a better example, if each site is given appropriate handling: even
where deeper study might prove that failure could only happen if the pmd
table were corrupted.
Several of the patches are, or include, cleanup on the way; and by the
end, pmd_trans_unstable() and suchlike are deleted: pte_offset_map() and
pte_offset_map_lock() then handle those original races and more. Most
uses of pte_lockptr() are deprecated, with pte_offset_map_nolock() taking
its place.
This patch (of 32):
Use pmdp_get_lockless() in preference to READ_ONCE(*pmdp), to get a more
reliable result with PAE (or READ_ONCE as before without PAE); and remove
the unnecessary extra barrier()s which got left behind in its callers.
HOWEVER: Note the small print in linux/pgtable.h, where it was designed
specifically for fast GUP, and depends on interrupts being disabled for
its full guarantee: most callers which have been added (here and before)
do NOT have interrupts disabled, so there is still some need for caution.
Link: https://lkml.kernel.org/r/f35279a9-9ac0-de22-d245-591afbfb4dc@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As the ramfs-based tmpfs uses ramfs_init_fs_context() for the
init_fs_context method, which allocates fc->s_fs_info, use ramfs_kill_sb()
to free it and avoid a memory leak.
Link: https://lkml.kernel.org/r/20230607161523.2876433-1-roberto.sassu@huaweicloud.com
Fixes: c3b1b1cbf0 ("ramfs: add support for "mode=" mount option")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix potential dereference of ERR_PTR @tlink as reported by kernel test
robot
fs/smb/client/connect.c:2775 cifs_match_super() error: 'tlink'
dereferencing possible ERR_PTR()
Link: https://lore.kernel.org/all/202306170124.CtQqzf0I-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We print most other mount options for a mount when dumping
the mount entries. But miss out the nosharesock value.
This change will print that in addition to the other options.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In case if all existing file handles are deferred handles and if all of
them gets closed due to handle lease break then we dont need to send
lease break acknowledgment to server, because last handle close will be
considered as lease break ack.
After closing deferred handels, we check for openfile list of inode,
if its empty then we skip sending lease break ack.
Fixes: 59a556aebc ("SMB3: drop reference to cfile before sending oplock break")
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
NFS doesn't properly support reporting the btime in getattr (yet), but
61a968b4f0 mistakenly added it to the request_mask. This causes statx
for STATX_BTIME to report a zeroed out btime instead of properly
clearing the flag.
Cc: stable@vger.kernel.org # v6.3+
Fixes: 61a968b4f0 ("nfs: report the inode version in getattr if requested")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2214134
Reported-by: Boyang Xue <bxue@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
In a syzbot stress test that deliberately causes file system errors on
nilfs2 with a corrupted disk image, it has been reported that
nilfs_clear_dirty_page() called from nilfs_clear_dirty_pages() can cause a
general protection fault.
In nilfs_clear_dirty_pages(), when looking up dirty pages from the page
cache and calling nilfs_clear_dirty_page() for each dirty page/folio
retrieved, the back reference from the argument page to "mapping" may have
been changed to NULL (and possibly others). It is necessary to check this
after locking the page/folio.
So, fix this issue by not calling nilfs_clear_dirty_page() on a page/folio
after locking it in nilfs_clear_dirty_pages() if the back reference
"mapping" from the page/folio is different from the "mapping" that held
the page/folio just before.
Link: https://lkml.kernel.org/r/20230612021456.3682-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+53369d11851d8f26735c@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000da4f6b05eb9bf593@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "revert shrinker_srcu related changes".
This patch (of 7):
This reverts commit cf2e309ebc.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700b ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly. That's why
unregister_shrinker() has become slower.
After discussion, we will try to use the refcount+RCU method [2] proposed
by Dave Chinner to continue to re-implement the lockless slab shrink. So
revert the shrinker_mutex back to shrinker_rwsem first.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-1-qi.zheng@linux.dev
Link: https://lkml.kernel.org/r/20230609081518.3039120-2-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As a result of analysis of a syzbot report, it turned out that in three
cases where nilfs2 allocates block device buffers directly via sb_getblk,
concurrent reads to the device can corrupt the allocated buffers.
Nilfs2 uses sb_getblk for segment summary blocks, that make up a log
header, and the super root block, that is the trailer, and when moving and
writing the second super block after fs resize.
In any of these, since the uptodate flag is not set when storing metadata
to be written in the allocated buffers, the stored metadata will be
overwritten if a device read of the same block occurs concurrently before
the write. This causes metadata corruption and misbehavior in the log
write itself, causing warnings in nilfs_btree_assign() as reported.
Fix these issues by setting an uptodate flag on the buffer head on the
first or before modifying each buffer obtained with sb_getblk, and
clearing the flag on failure.
When setting the uptodate flag, the lock_buffer/unlock_buffer pair is used
to perform necessary exclusive control, and the buffer is filled to ensure
that uninitialized bytes are not mixed into the data read from others. As
for buffers for segment summary blocks, they are filled incrementally, so
if the uptodate flag was unset on their allocation, set the flag and zero
fill the buffer once at that point.
Also, regarding the superblock move routine, the starting point of the
memset call to zerofill the block is incorrectly specified, which can
cause a buffer overflow on file systems with block sizes greater than
4KiB. In addition, if the superblock is moved within a large block, it is
necessary to assume the possibility that the data in the superblock will
be destroyed by zero-filling before copying. So fix these potential
issues as well.
Link: https://lkml.kernel.org/r/20230609035732.20426-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+31837fe952932efc8fb9@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/00000000000030000a05e981f475@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the client received NFS4ERR_BADSESSION, it schedules recovery
and start the state manager thread which in turn freezes the
session table and does not allow for any new requests to use the
no-longer valid session. However, it is possible that before
the state manager thread runs, a new operation would use the
released slot that received BADSESSION and was therefore not
updated its sequence number. Such re-use of the slot can lead
the application errors.
Fixes: 5c441544f0 ("NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Currently, the list_lru::shrinker_id corresponding to the nfs4_xattr
shrinkers is wrong:
>>> prog["nfs4_xattr_cache_lru"].shrinker_id
(int)0
>>> prog["nfs4_xattr_entry_lru"].shrinker_id
(int)0
>>> prog["nfs4_xattr_large_entry_lru"].shrinker_id
(int)0
>>> prog["nfs4_xattr_cache_shrinker"].id
(int)18
>>> prog["nfs4_xattr_entry_shrinker"].id
(int)19
>>> prog["nfs4_xattr_large_entry_shrinker"].id
(int)20
This is not what we expect, which will cause these shrinkers
not to be found in shrink_slab_memcg().
We should assign shrinker::id before calling list_lru_init_memcg(),
so that the corresponding list_lru::shrinker_id will be assigned
the correct value like below:
>>> prog["nfs4_xattr_cache_lru"].shrinker_id
(int)16
>>> prog["nfs4_xattr_entry_lru"].shrinker_id
(int)17
>>> prog["nfs4_xattr_large_entry_lru"].shrinker_id
(int)18
>>> prog["nfs4_xattr_cache_shrinker"].id
(int)16
>>> prog["nfs4_xattr_entry_shrinker"].id
(int)17
>>> prog["nfs4_xattr_large_entry_shrinker"].id
(int)18
So just do it.
Fixes: 95ad37f90c ("NFSv4.2: add client side xattr caching.")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If a SEQUENCE call receives -EIO for a shutdown client, it will retry the
RPC call. Instead of doing that for a shutdown client, just bail out.
Likewise, if the state manager decides to perform recovery for a shutdown
client, it will continuously retry. As above, just bail out.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Walk existing RPC tasks and cancel them with -EIO when the client is
shutdown.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Within each nfs_server sysfs tree, add an entry named "shutdown". Writing
1 to this file will set the cl_shutdown bit on the rpc_clnt structs
associated with that mount. If cl_shutdown is set, the task scheduler
immediately returns -EIO for new tasks.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
After lockd is started, add a symlink for lockd's rpc_client under
NFS' superblock sysfs.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
For the general and state management nfs_client under each mount, create
symlinks to their respective rpc_client sysfs entries.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Create a sysfs directory for each mount that corresponds to the mount's
nfs_server struct. As the mount is being constructed, use the name
"server-n", but rename it to the "MAJOR:MINOR" of the mount after assigning
a device_id. The rename approach allows us to populate the mount's directory
with links to the various rpc_client objects during the mount's
construction. The naming convention (MAJOR:MINOR) can be used to reference
a particular NFS mount's sysfs tree.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Expand the NFS network-namespaced sysfs from /sys/fs/nfs/net down one level
into /sys/fs/nfs by moving the "net" kobject onto struct
nfs_netns_client and setting it up during network namespace init.
This prepares the way for superblock kobjects within /sys/fs/nfs that will
only be visible to matching network namespaces.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
In preparation to make objects below /sys/fs/nfs namespace aware, we need
to define our own kobj_type for the nfs kset so that we can add the
.child_ns_type member in a following patch. No functional change here, only
the unrolling of kset_create_and_add().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Match the variable names to the sysfs structure.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Be brief and match the subsystem name. There's no need to distinguish this
kset variable from the server.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we disable quotas while we have a relocation of a metadata block group
that has extents belonging to the quota root, we can cause the relocation
to fail with -ENOENT. This is because relocation builds backref nodes for
extents of the quota root and later needs to walk the backrefs and access
the quota root - however if in between a task disables quotas, it results
in deleting the quota root from the root tree (with btrfs_del_root(),
called from btrfs_quota_disable().
This can be sporadically triggered by test case btrfs/255 from fstests:
$ ./check btrfs/255
FSTYP -- btrfs
PLATFORM -- Linux/x86_64 debian0 6.4.0-rc6-btrfs-next-134+ #1 SMP PREEMPT_DYNAMIC Thu Jun 15 11:59:28 WEST 2023
MKFS_OPTIONS -- /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1
btrfs/255 6s ... _check_dmesg: something found in dmesg (see /home/fdmanana/git/hub/xfstests/results//btrfs/255.dmesg)
- output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad)
--- tests/btrfs/255.out 2023-03-02 21:47:53.876609426 +0000
+++ /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad 2023-06-16 10:20:39.267563212 +0100
@@ -1,2 +1,4 @@
QA output created by 255
+ERROR: error during balancing '/home/fdmanana/btrfs-tests/scratch_1': No such file or directory
+There may be more info in syslog - try dmesg | tail
Silence is golden
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/255.out /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad' to see the entire diff)
Ran: btrfs/255
Failures: btrfs/255
Failed 1 of 1 tests
To fix this make the quota disable operation take the cleaner mutex, as
relocation of a block group also takes this mutex. This is also what we
do when deleting a subvolume/snapshot, we take the cleaner mutex in the
cleaner kthread (at cleaner_kthread()) and then we call btrfs_del_root()
at btrfs_drop_snapshot() while under the protection of the cleaner mutex.
Fixes: bed92eae26 ("Btrfs: qgroup implementation and prototypes")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a comment to struct btrfs_fs_info::dirty_cowonly_roots to mention
that struct btrfs_fs_info::trans_lock is the lock that protects that
list.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When deleting the free space tree we are deleting the free space root
from the list fs_info->dirty_cowonly_roots without taking the lock that
protects it, which is struct btrfs_fs_info::trans_lock.
This unsynchronized list manipulation may cause chaos if there's another
concurrent manipulation of this list, such as when adding a root to it
with ctree.c:add_root_to_dirty_list().
This can result in all sorts of weird failures caused by a race, such as
the following crash:
[337571.278245] general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] PREEMPT SMP PTI
[337571.278933] CPU: 1 PID: 115447 Comm: btrfs Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1
[337571.279153] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[337571.279572] RIP: 0010:commit_cowonly_roots+0x11f/0x250 [btrfs]
[337571.279928] Code: 85 38 06 00 (...)
[337571.280363] RSP: 0018:ffff9f63446efba0 EFLAGS: 00010206
[337571.280582] RAX: ffff942d98ec2638 RBX: ffff9430b82b4c30 RCX: 0000000449e1c000
[337571.280798] RDX: dead000000000100 RSI: ffff9430021e4900 RDI: 0000000000036070
[337571.281015] RBP: ffff942d98ec2000 R08: ffff942d98ec2000 R09: 000000000000015b
[337571.281254] R10: 0000000000000009 R11: 0000000000000001 R12: ffff942fe8fbf600
[337571.281476] R13: ffff942dabe23040 R14: ffff942dabe20800 R15: ffff942d92cf3b48
[337571.281723] FS: 00007f478adb7340(0000) GS:ffff94349fa40000(0000) knlGS:0000000000000000
[337571.281950] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[337571.282184] CR2: 00007f478ab9a3d5 CR3: 000000001e02c001 CR4: 0000000000370ee0
[337571.282416] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[337571.282647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[337571.282874] Call Trace:
[337571.283101] <TASK>
[337571.283327] ? __die_body+0x1b/0x60
[337571.283570] ? die_addr+0x39/0x60
[337571.283796] ? exc_general_protection+0x22e/0x430
[337571.284022] ? asm_exc_general_protection+0x22/0x30
[337571.284251] ? commit_cowonly_roots+0x11f/0x250 [btrfs]
[337571.284531] btrfs_commit_transaction+0x42e/0xf90 [btrfs]
[337571.284803] ? _raw_spin_unlock+0x15/0x30
[337571.285031] ? release_extent_buffer+0x103/0x130 [btrfs]
[337571.285305] reset_balance_state+0x152/0x1b0 [btrfs]
[337571.285578] btrfs_balance+0xa50/0x11e0 [btrfs]
[337571.285864] ? __kmem_cache_alloc_node+0x14a/0x410
[337571.286086] btrfs_ioctl+0x249a/0x3320 [btrfs]
[337571.286358] ? mod_objcg_state+0xd2/0x360
[337571.286577] ? refill_obj_stock+0xb0/0x160
[337571.286798] ? seq_release+0x25/0x30
[337571.287016] ? __rseq_handle_notify_resume+0x3ba/0x4b0
[337571.287235] ? percpu_counter_add_batch+0x2e/0xa0
[337571.287455] ? __x64_sys_ioctl+0x88/0xc0
[337571.287675] __x64_sys_ioctl+0x88/0xc0
[337571.287901] do_syscall_64+0x38/0x90
[337571.288126] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[337571.288352] RIP: 0033:0x7f478aaffe9b
So fix this by locking struct btrfs_fs_info::trans_lock before deleting
the free space root from that list.
Fixes: a5ed918285 ("Btrfs: implement the free space B-tree")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs_inode_mod_outstanding_extents trace event only shows the modified
number to the number of outstanding extents. It would be helpful if we can
see the resulting extent number as well.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After some discussion, we decided that controlling transport layer
security policy should be separate from the setting for the user
authentication flavor. To accomplish this, add a new NFS mount
option to select a transport layer security policy for RPC
operations associated with the mount point.
xprtsec=none - Transport layer security is forced off.
xprtsec=tls - Establish an encryption-only TLS session. If
the initial handshake fails, the mount fails.
If TLS is not available on a reconnect, drop
the connection and try again.
xprtsec=mtls - Both sides authenticate and an encrypted
session is created. If the initial handshake
fails, the mount fails. If TLS is not available
on a reconnect, drop the connection and try
again.
To support client peer authentication (mtls), the handshake daemon
will have configurable default authentication material (certificate
or pre-shared key). In the future, mount options can be added that
can provide this material on a per-mount basis.
Updates to mount.nfs (to support xprtsec=auto) and nfs(5) will be
sent under separate cover.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The new field is used to match struct nfs_clients that have the same
TLS policy setting.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Overlayfs creates the real underlying files with fake f_path, whose
f_inode is on the underlying fs and f_path on overlayfs.
Those real files were open with FMODE_NONOTIFY, because fsnotify code was
not prapared to handle fsnotify hooks on files with fake path correctly
and fanotify would report unexpected event->fd with fake overlayfs path,
when the underlying fs was being watched.
Teach fsnotify to handle events on the real files, and do not set real
files to FMODE_NONOTIFY to allow operations on real file (e.g. open,
access, modify, close) to generate async and permission events.
Because fsnotify does not have notifications on address space
operations, we do not need to worry about ->vm_file not reporting
events to a watched overlayfs when users are accessing a mapped
overlayfs file.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <20230615112229.2143178-6-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Overlayfs uses open_with_fake_path() to allocate internal kernel files,
with a "fake" path - whose f_path is not on the same fs as f_inode.
Allocate a container struct backing_file for those internal files, that
is used to hold the "fake" ovl path along with the real path.
backing_file_real_path() can be used to access the stored real path.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <20230615112229.2143178-5-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add some missing observability to the fs_context tracepoints
added by commit 33ce83ef0b ("NFS: Replace fs_context-related
dprintk() call sites with tracepoints").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Use a common helper init_file() instead of __alloc_file() for
alloc_empty_file*() helpers and improrve the documentation.
This is needed for a follow up patch that allocates a backing_file
container.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230615112229.2143178-4-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
cachefiles uses kernel_open_tmpfile() to open kernel internal tmpfile
without accounting for nr_files.
cachefiles uses open_with_fake_path() for the same reason without the
need for a fake path.
Fork open_with_fake_path() to kernel_file_open() which only does the
noaccount part and use it in cachefiles.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230615112229.2143178-3-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Otherwise, `stat` will report a stale value to users.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fold them into the other NFS v4.2 operations in the right spots and
adjust spacing to keep the same style.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Overlayfs and cachefiles use vfs_open_tmpfile() to open a tmpfile
without accounting for nr_files.
Rename this helper to kernel_tmpfile_open() to better reflect this
helper is used for kernel internal users.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230615112229.2143178-2-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
I add commends above each function to match the style of the other
nfs4_xdr_dec_*() functions. I also remove the unnecessary #ifdef
CONFIG_NFS_V4_2 that was added around this code, since we are already in
a v4.2-only file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
They should be in the nfs4_xdr_enc_*() section, and not at the bottom of
the file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Move them out of the encode_*() section and into the decode_*() section
where it belongs.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Move the function to be with the other encode_*() functions, instead of
in the middle of the nfs4_xdr_enc_*() section.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When updating the ctime, we also want to update i_version.
This is just something I noticed by inspection. There is probably no way
to test this today unless you can somehow get to this inode via nfsd.
Still, I think it's the right thing to do for consistency's sake.
David Sterba's comment: I don't see anything wrong with setting the
iversion bit, however I also don't see where this would be useful.
Agreed with the consistency, otherwise the time is updated when device
super block is wiped or a device initialized, both are big events so
missing that due to lack of iversion update seems unlikely. I'll add it
to the queue, thanks.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
[ add comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
The 'btrfs_compressed_bioset' struct isn't exported outside of the
fs/btrfs/compression.c file, so make it static to fix the following
sparse warning:
fs/btrfs/compression.c:40:16: warning: symbol 'btrfs_compressed_bioset' was not declared. Should it be static?
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit acc8d8588c converted afs_writepages_region() to write back a
folio batch. The function waits for writeback to a folio, but then
proceeds to the rest of the batch without trying to write that folio
again. This patch fixes has it attempt to write the folio again.
[DH: Also remove an 'else' that adding a goto makes redundant]
Fixes: acc8d8588c ("afs: convert afs_writepages_region() to use filemap_get_folios_tag()")
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20230607204120.89416-2-vishal.moola@gmail.com/
Commit acc8d8588c converted afs_writepages_region() to write back a
folio batch. If writeback needs rescheduling, the function exits without
dropping the references to the folios in fbatch. This patch fixes that.
[DH: Moved the added line before the _leave()]
Fixes: acc8d8588c ("afs: convert afs_writepages_region() to use filemap_get_folios_tag()")
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20230607204120.89416-1-vishal.moola@gmail.com/
Callers of `btrfs_reduce_alloc_profile` expect it to return exactly
one allocation profile flag, and failing to do so may ultimately
result in a WARN_ON and remount-ro when allocating new blocks, like
the below transaction abort on 6.1.
`btrfs_reduce_alloc_profile` has two ways of determining the profile,
first it checks if a conversion balance is currently running and
uses the profile we're converting to. If no balance is currently
running, it returns the max-redundancy profile which at least one
block in the selected block group has.
This works by simply checking each known allocation profile bit in
redundancy order. However, `btrfs_reduce_alloc_profile` has not been
updated as new flags have been added - first with the `DUP` profile
and later with the RAID1C34 profiles.
Because of the way it checks, if we have blocks with different
profiles and at least one is known, that profile will be selected.
However, if none are known we may return a flag set with multiple
allocation profiles set.
This is currently only possible when a balance from one of the three
unhandled profiles to another of the unhandled profiles is canceled
after allocating at least one block using the new profile.
In that case, a transaction abort like the below will occur and the
filesystem will need to be mounted with -o skip_balance to get it
mounted rw again (but the balance cannot be resumed without a
similar abort).
[770.648] ------------[ cut here ]------------
[770.648] BTRFS: Transaction aborted (error -22)
[770.648] WARNING: CPU: 43 PID: 1159593 at fs/btrfs/extent-tree.c:4122 find_free_extent+0x1d94/0x1e00 [btrfs]
[770.648] CPU: 43 PID: 1159593 Comm: btrfs Tainted: G W 6.1.0-0.deb11.7-powerpc64le #1 Debian 6.1.20-2~bpo11+1a~test
[770.648] Hardware name: T2P9D01 REV 1.00 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV
[770.648] NIP: c00800000f6784fc LR: c00800000f6784f8 CTR: c000000000d746c0
[770.648] REGS: c000200089afe9a0 TRAP: 0700 Tainted: G W (6.1.0-0.deb11.7-powerpc64le Debian 6.1.20-2~bpo11+1a~test)
[770.648] MSR: 9000000002029033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE> CR: 28848282 XER: 20040000
[770.648] CFAR: c000000000135110 IRQMASK: 0
GPR00: c00800000f6784f8 c000200089afec40 c00800000f7ea800 0000000000000026
GPR04: 00000001004820c2 c000200089afea00 c000200089afe9f8 0000000000000027
GPR08: c000200ffbfe7f98 c000000002127f90 ffffffffffffffd8 0000000026d6a6e8
GPR12: 0000000028848282 c000200fff7f3800 5deadbeef0000122 c00000002269d000
GPR16: c0002008c7797c40 c000200089afef17 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000001 c000200008bc5a98 0000000000000001
GPR24: 0000000000000000 c0000003c73088d0 c000200089afef17 c000000016d3a800
GPR28: c0000003c7308800 c00000002269d000 ffffffffffffffea 0000000000000001
[770.648] NIP [c00800000f6784fc] find_free_extent+0x1d94/0x1e00 [btrfs]
[770.648] LR [c00800000f6784f8] find_free_extent+0x1d90/0x1e00 [btrfs]
[770.648] Call Trace:
[770.648] [c000200089afec40] [c00800000f6784f8] find_free_extent+0x1d90/0x1e00 [btrfs] (unreliable)
[770.648] [c000200089afed30] [c00800000f681398] btrfs_reserve_extent+0x1a0/0x2f0 [btrfs]
[770.648] [c000200089afeea0] [c00800000f681bf0] btrfs_alloc_tree_block+0x108/0x670 [btrfs]
[770.648] [c000200089afeff0] [c00800000f66bd68] __btrfs_cow_block+0x170/0x850 [btrfs]
[770.648] [c000200089aff100] [c00800000f66c58c] btrfs_cow_block+0x144/0x288 [btrfs]
[770.648] [c000200089aff1b0] [c00800000f67113c] btrfs_search_slot+0x6b4/0xcb0 [btrfs]
[770.648] [c000200089aff2a0] [c00800000f679f60] lookup_inline_extent_backref+0x128/0x7c0 [btrfs]
[770.648] [c000200089aff3b0] [c00800000f67b338] lookup_extent_backref+0x70/0x190 [btrfs]
[770.648] [c000200089aff470] [c00800000f67b54c] __btrfs_free_extent+0xf4/0x1490 [btrfs]
[770.648] [c000200089aff5a0] [c00800000f67d770] __btrfs_run_delayed_refs+0x328/0x1530 [btrfs]
[770.648] [c000200089aff740] [c00800000f67ea2c] btrfs_run_delayed_refs+0xb4/0x3e0 [btrfs]
[770.648] [c000200089aff800] [c00800000f699aa4] btrfs_commit_transaction+0x8c/0x12b0 [btrfs]
[770.648] [c000200089aff8f0] [c00800000f6dc628] reset_balance_state+0x1c0/0x290 [btrfs]
[770.648] [c000200089aff9a0] [c00800000f6e2f7c] btrfs_balance+0x1164/0x1500 [btrfs]
[770.648] [c000200089affb40] [c00800000f6f8e4c] btrfs_ioctl+0x2b54/0x3100 [btrfs]
[770.648] [c000200089affc80] [c00000000053be14] sys_ioctl+0x794/0x1310
[770.648] [c000200089affd70] [c00000000002af98] system_call_exception+0x138/0x250
[770.648] [c000200089affe10] [c00000000000c654] system_call_common+0xf4/0x258
[770.648] --- interrupt: c00 at 0x7fff94126800
[770.648] NIP: 00007fff94126800 LR: 0000000107e0b594 CTR: 0000000000000000
[770.648] REGS: c000200089affe80 TRAP: 0c00 Tainted: G W (6.1.0-0.deb11.7-powerpc64le Debian 6.1.20-2~bpo11+1a~test)
[770.648] MSR: 900000000000d033 <SF,HV,EE,PR,ME,IR,DR,RI,LE> CR: 24002848 XER: 00000000
[770.648] IRQMASK: 0
GPR00: 0000000000000036 00007fffc9439da0 00007fff94217100 0000000000000003
GPR04: 00000000c4009420 00007fffc9439ee8 0000000000000000 0000000000000000
GPR08: 00000000803c7416 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 00007fff9467d120 0000000107e64c9c 0000000107e64d0a
GPR16: 0000000107e64d06 0000000107e64cf1 0000000107e64cc4 0000000107e64c73
GPR20: 0000000107e64c31 0000000107e64bf1 0000000107e64be7 0000000000000000
GPR24: 0000000000000000 00007fffc9439ee0 0000000000000003 0000000000000001
GPR28: 00007fffc943f713 0000000000000000 00007fffc9439ee8 0000000000000000
[770.648] NIP [00007fff94126800] 0x7fff94126800
[770.648] LR [0000000107e0b594] 0x107e0b594
[770.648] --- interrupt: c00
[770.648] Instruction dump:
[770.648] 3b00ffe4 e8898828 481175f5 60000000 4bfff4fc 3be00000 4bfff570 3d220000
[770.648] 7fc4f378 e8698830 4811cd95 e8410018 <0fe00000> f9c10060 f9e10068 fa010070
[770.648] ---[ end trace 0000000000000000 ]---
[770.648] BTRFS: error (device dm-2: state A) in find_free_extent_update_loop:4122: errno=-22 unknown
[770.648] BTRFS info (device dm-2: state EA): forced readonly
[770.648] BTRFS: error (device dm-2: state EA) in __btrfs_free_extent:3070: errno=-22 unknown
[770.648] BTRFS error (device dm-2: state EA): failed to run delayed ref for logical 17838685708288 num_bytes 24576 type 184 action 2 ref_mod 1: -22
[770.648] BTRFS: error (device dm-2: state EA) in btrfs_run_delayed_refs:2144: errno=-22 unknown
[770.648] BTRFS: error (device dm-2: state EA) in reset_balance_state:3599: errno=-22 unknown
Fixes: 47e6f7423b ("btrfs: add support for 3-copy replication (raid1c3)")
Fixes: 8d6fac0087 ("btrfs: add support for 4-copy replication (raid1c4)")
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Matt Corallo <blnxfsl@bluematt.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the scrub rework introduced by commit 2af2aaf982 ("btrfs:
scrub: introduce structure for new BTRFS_STRIPE_LEN based interface")
and later commits, scrub only needs one single workqueue,
fs_info::scrub_worker.
That scrub_wr_completion_workers is initially to handle the delay work
after write bios finished. But the new scrub code goes submit-and-wait
for write bios, thus all the work are done inside the scrub_worker.
The last user of fs_info::scrub_wr_completion_workers is removed in
commit 16f9399349 ("btrfs: scrub: remove the old writeback
infrastructure"), so we can safely remove the workqueue.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the rework of scrub introduced by commit 2af2aaf982 ("btrfs:
scrub: introduce structure for new BTRFS_STRIPE_LEN based interface")
and later commits, scrub no longer keeps its data checksum inside sctx.
Instead we have scrub_stripe::csums for the checksum of the stripe.
Thus we can remove the unused scrub_ctx::csum_list member.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During truncation we reserve 2 metadata units when starting a transaction
(reserved space goes to fs_info->trans_block_rsv) and then attempt to
migrate 1 unit (min_size bytes) from fs_info->trans_block_rsv into the
local block reserve. If we ever fail we trigger a BUG_ON(), which should
never happen, because we reserved 2 units. However if we happen to fail
for some reason, we don't need to be so dire and hit a BUG_ON(), we can
just error out the truncation and, since this is highly unexpected,
surround the error check with WARN_ON(), to get an informative stack
trace and tag the branh as 'unlikely'. Also make the 'min_size' variable
const, since it's not supposed to ever change and any accidental change
could possibly make the space migration not so unlikely to fail.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During the transaction commit path, at create_pending_snapshot(), there
is no need to BUG_ON() in case we fail to get a dir index for the snapshot
in the parent directory. This should fail very rarely because the parent
inode should be loaded in memory already, with the respective delayed
inode created and the parent inode's index_cnt field already initialized.
However if it fails, it may be -ENOMEM like the comment at
create_pending_snapshot() says or any error returned by
btrfs_search_slot() through btrfs_set_inode_index_count(), which can be
pretty much anything such as -EIO or -EUCLEAN for example. So the comment
is not correct when it says it can only be -ENOMEM.
However doing a BUG_ON() here is overkill, since we can instead abort
the transaction and return the error. Note that any error returned by
create_pending_snapshot() will eventually result in a transaction
abort at cleanup_transaction(), called from btrfs_commit_transaction(),
but we can explicitly abort the transaction at this point instead so that
we get a stack trace to tell us that the call to btrfs_set_inode_index()
failed.
So just abort the transaction and return in case btrfs_set_inode_index()
returned an error at create_pending_snapshot().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's really no need to BUG_ON() if we find a symlink with an extent
that is not inline or is compressed. We can just make send fail with
an error (-EUCLEAN) and log an informative error message, so just do
that instead of BUG_ON().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When dropping inode items from a log tree at drop_inode_items(), we this
BUG_ON() on the result of btrfs_search_slot() because we don't expect an
exact match since having a key with an offset of (u64)-1 is unexpected.
That is generally true, but for dir index keys for example, we can get a
key with such an offset value, even though it's very unlikely and it would
take ages to increase the sequence counter for a dir index up to (u64)-1.
We can deal with an exact match, we just have to delete the key at that
slot, so there is really no need to BUG_ON(), error out or trigger any
warning. So remove the BUG_ON().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no need to BUG_ON() at split_item() if the leaf does not have
enough free space for the new item, we can just return -ENOSPC since
the caller can deal with errors from split_item(). Also, as this is a
very unlikely condition to happen, because the caller has invoked
setup_leaf_for_split() before calling split_item(), surround the
condition with a WARN_ON() which makes it easier to notice this
unexpected condition and tags the if branch with 'unlikely' as well.
I've actually once hit this BUG_ON() with some incorrect code changes
I had, which was very inconvenient as it required rebooting the VM.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_del_ptr(), instead of doing a BUG_ON() in case we fail to record
tree mod log operations, do a transaction abort and return the error to
the callers. There's really no need for the BUG_ON() as we can release all
resources in the context of all callers, and we have to abort because other
future tree searches that use the tree mod log (btrfs_search_old_slot())
may get inconsistent results if other operations modify the tree after
that failure and before the tree mod log based search.
This implies btrfs_del_ptr() return an int instead of void, and making all
callers check for returned errors.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At insert_ptr(), instead of doing a BUG_ON() in case we fail to record
tree mod log operations, do a transaction abort and return the error to
the callers. There's really no need for the BUG_ON() as we can release all
resources in the context of all callers, and we have to abort because other
future tree searches that use the tree mod log (btrfs_search_old_slot())
may get inconsistent results if other operations modify the tree after
that failure and before the tree mod log based search.
This implies making insert_ptr() return an int instead of void, and making
all callers check for returned errors.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At insert_new_root(), instead of doing a BUG_ON() in case we fail to
record the tree mod log operation, just return the error to the callers
after releasing the allocated tree block. At this point we haven't made
any changes to the b+tree, so we haven't left it in an inconsistent state
and therefore have no need to abort the transaction. All we need to do is
to unlock and free the extent buffer we just allocated with the purpose
of making it the new root.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At push_nodes_for_insert(), instead of doing a BUG_ON() in case we fail to
record tree mod log operations, do a transaction abort and return the
error to the caller. There's really no need for the BUG_ON() as we can
release all resources in this context, and we have to abort because other
future tree searches that use the tree mod log (btrfs_search_old_slot())
may get inconsistent results if other operations modify the tree after
that failure and before the tree mod log based search.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At update_ref_for_cow() we are calling btrfs_handle_fs_error() if we find
that the extent buffer has an unexpected ref count of zero, however we can
simply use btrfs_abort_transaction(), which achieves the same purposes: to
turn the fs to error state, abort the current transaction and turn the fs
to RO mode as well. Besides that, btrfs_abort_transaction() also prints a
stack trace which makes it more useful.
Also, as this is a very unexpected situation, indicating a serious
corruption/inconsistency, tag the if branch as 'unlikely', set the error
code to -EUCLEAN instead of -EROFS, and log an explicit message.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At balance_level() we are calling btrfs_handle_fs_error() when the middle
child only has 1 item and the left child is missing, however we can simply
use btrfs_abort_transaction(), which achieves the same purposes: to turn
the fs to error state, abort the current transaction and turn the fs to
RO mode. Besides that, btrfs_abort_transaction() also prints a stack trace
which makes it more useful.
Also, as this is a highly unexpected case and it's about a b+tree
inconsistency, change the error code from -EROFS to -EUCLEAN, tag the if
branch as 'unlikely' and log an explicit error message.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At balance_level(), when trying to promote a child node to a root node, if
we fail to read the child we call btrfs_handle_fs_error(), which turns the
fs to RO mode and sets it to error state as well, causing any ongoing
transaction to abort. This however is not necessary because at that point
we have not made any change yet at balance_level(), so any error reading
the child node does not leaves us in any inconsistent state. Therefore we
can just return the error to the caller.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At balance_level() we have this 'enospc' label where we jump to in case
we get an error at several places. However that error is certainly not
-ENOSPC in call cases, it can be -EIO or -ENOMEM when reading a child
extent buffer for example, or -ENOMEM when trying to record tree mod log
operations. So to make this less confusing, rename the label to 'out'.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At balance_level(), instead of doing a BUG_ON() in case we fail to record
tree mod log operations, do a transaction abort and return the error to
the callers. There's really no need for the BUG_ON() as we can release
all resources in this context, and we have to abort because other future
tree searches that use the tree mod log (btrfs_search_old_slot()) may get
inconsistent results if other operations modify the tree after that
failure and before the tree mod log based search.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At __btrfs_cow_block(), instead of doing a BUG_ON() in case we fail to
record a tree mod log root insertion operation, do a transaction abort
instead. There's really no need for the BUG_ON(), we can properly
release all resources in this context and turn the filesystem to RO mode
and in an error state instead.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging tree mod log operations we start by checking, in a lockless
manner, if we need to log - if we don't, we just return and do nothing,
otherwise we will allocate one or more tree mod log operations and then
check again if we need to log. This second check will take the tree mod
log lock in write mode if we need to log, otherwise it will do nothing
and we just free the allocated memory and return success.
We can improve on this by not returning an error in case the memory
allocations fail, unless the second check tells us that we actually need
to log. That is, if we fail to allocate memory and the second check tells
use that we don't need to log, we can just return success and avoid
returning -ENOMEM to the caller. Currently tree mod log failures are
dealt with either a BUG_ON() or a transaction abort, as tree mod log
operations are logged in code paths that modify a b+tree.
So just avoid failing with -ENOMEM if we fail to allocate a tree mod log
operation unless we actually need to log the operations, that is, if
tree_mod_dont_log() returns true.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At split_node(), if we fail to log the tree mod log copy operation, we
return without unlocking the split extent buffer we just allocated and
without decrementing the reference we own on it. Fix this by unlocking
it and decrementing the ref count before returning.
Fixes: 5de865eebb ("Btrfs: fix tree mod logging")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When COWing an extent buffer that is not the root node, we need to log in
the tree mod log that we replaced a pointer in the parent node, otherwise
a tree mod log user doing a search on the b+tree can return incorrect
results (that miss something). We are doing the call to
btrfs_tree_mod_log_insert_key() but we totally ignore its return value.
So fix this by adding the missing error handling, resulting in a
transaction abort and freeing the COWed extent buffer.
Fixes: f230475e62 ("Btrfs: put all block modifications into the tree mod log")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit a2ad63daa8 ("VFS: add FMODE_CAN_ODIRECT file flag") file
systems can just set the FMODE_CAN_ODIRECT flag at open time instead of
wiring up a dummy direct_IO method to indicate support for direct I/O.
Do that for btrfs so that noop_direct_IO can eventually be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we are only documenting two uses of the bg_list member of a
block group, but there two more:
1) To track deleted block groups for discard purposes, introduced in
commit e33e17ee10 ("btrfs: add missing discards when unpinning
extents with -o discard");
2) To track block groups for automatic reclaim, introduced more recently
by commit 18bb8bbf13 ("btrfs: zoned: automatically reclaim zones")
So document those two other use cases.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The reclaim process can temporarily fail. For example, if the space is
getting tight, it fails to make the block group read-only. If there are no
further writes on that block group, the block group will never get back to
the reclaim list, and the BG never gets reclaimed. In a certain workload,
we can leave many such block groups never reclaimed.
So, let's get it back to the list and give it a chance to be reclaimed.
Fixes: 18bb8bbf13 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
