Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else. Not to mention the removal of
boilerplate code from ->destroy_inode() instances...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ocfs2: Fix cleancache initialization call to correctly pass uuid
As reported by Steven Whitehouse in https://lkml.org/lkml/2011/5/27/221
the ocfs2 volume UUID is incorrectly passed to cleancache.
As a result, shared-ephemeral tmem pools will not actually
be created; instead they will be private (unshared) which
misses out on a major benefit of tmem.
Reported-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Fix a corruption that can happen when we have (two or more) outstanding
aio's to an overlapping unaligned region. Ext4
(e9e3bcecf4) and xfs recently had to fix
similar issues.
In our case what happens is that we can have an outstanding aio on a region
and if a write comes in with some bytes overlapping the original aio we may
decide to read that region into a page before continuing (typically because
of buffered-io fallback). Since we have no ordering guarantees with the
aio, we can read stale or bad data into the page and then write it back out.
If the i/o is page and block aligned, then we avoid this issue as there
won't be any need to read data from disk.
I took the same approach as Eric in the ext4 patch and introduced some
serialization of unaligned async direct i/o. I don't expect this to have an
effect on the most common cases of AIO. Unaligned aio will be slower
though, but that's far more acceptable than data corruption.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Caching "we have already removed suid/caps" was overenthusiastic as merged.
On network filesystems we might have had suid/caps set on another client,
silently picked by this client on revalidate, all of that *without* clearing
the S_NOSEC flag.
AFAICS, the only reasonably sane way to deal with that is
* new superblock flag; unless set, S_NOSEC is not going to be set.
* local block filesystems set it in their ->mount() (more accurately,
mount_bdev() does, so does btrfs ->mount(), users of mount_bdev() other than
local block ones clear it)
* if any network filesystem (or a cluster one) wants to use S_NOSEC,
it'll need to set MS_NOSEC in sb->s_flags *AND* take care to clear S_NOSEC when
inode attribute changes are picked from other clients.
It's not an earth-shattering hole (anybody that can set suid on another client
will almost certainly be able to write to the file before doing that anyway),
but it's a bug that needs fixing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ocfs2 cannot currently mount a device that is readonly at the media
("hard readonly"). Fix the broken places.
see detail: http://oss.oracle.com/bugzilla/show_bug.cgi?id=1322
[ Description edited -- Joel ]
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Reviewed-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (28 commits)
Ocfs2: Teach local-mounted ocfs2 to handle unwritten_extents correctly.
ocfs2/dlm: Do not migrate resource to a node that is leaving the domain
ocfs2/dlm: Add new dlm message DLM_BEGIN_EXIT_DOMAIN_MSG
Ocfs2/move_extents: Set several trivial constraints for threshold.
Ocfs2/move_extents: Let defrag handle partial extent moving.
Ocfs2/move_extents: move/defrag extents within a certain range.
Ocfs2/move_extents: helper to calculate the defraging length in one run.
Ocfs2/move_extents: move entire/partial extent.
Ocfs2/move_extents: helpers to update the group descriptor and global bitmap inode.
Ocfs2/move_extents: helper to probe a proper region to move in an alloc group.
Ocfs2/move_extents: helper to validate and adjust moving goal.
Ocfs2/move_extents: find the victim alloc group, where the given #blk fits.
Ocfs2/move_extents: defrag a range of extent.
Ocfs2/move_extents: move a range of extent.
Ocfs2/move_extents: lock allocators and reserve metadata blocks and data clusters for extents moving.
Ocfs2/move_extents: Add basic framework and source files for extent moving.
Ocfs2/move_extents: Adding new ioctl code 'OCFS2_IOC_MOVE_EXT' to ocfs2.
Ocfs2/refcounttree: Publicize couple of funcs from refcounttree.c
Ocfs2: Add a new code 'OCFS2_INFO_FREEFRAG' for o2info ioctl.
Ocfs2: Add a new code 'OCFS2_INFO_FREEINODE' for o2info ioctl.
...
This eighth patch of eight in this cleancache series "opts-in"
cleancache for ocfs2. Clustered filesystems must explicitly enable
cleancache by calling cleancache_init_shared_fs anytime an instance
of the filesystem is mounted. Ocfs2 is currently the only user of
the clustered filesystem interface but nevertheless, the cleancache
hooks in the VFS layer are sufficient for ocfs2 including the matching
cleancache_flush_fs hook which must be called on unmount.
Details and a FAQ can be found in Documentation/vm/cleancache.txt
[v8: trivial merge conflict update]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Tso <tytso@mit.edu>
Cc: Nitin Gupta <ngupta@vflare.org>
As ocfs2 supports relatime and strictatime, we need update the
relative document. Atime_quantum need work with strictatime, so only
show it in procfs when mount with strictatime.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix build failure introduced by s/freezeable/freezable/
workqueue: add system_freezeable_wq
rds/ib: use system_wq instead of rds_ib_fmr_wq
net/9p: replace p9_poll_task with a work
net/9p: use system_wq instead of p9_mux_wq
xfs: convert to alloc_workqueue()
reiserfs: make commit_wq use the default concurrency level
ocfs2: use system_wq instead of ocfs2_quota_wq
ext4: convert to alloc_workqueue()
scsi/scsi_tgt_lib: scsi_tgtd isn't used in memory reclaim path
scsi/be2iscsi,qla2xxx: convert to alloc_workqueue()
misc/iwmc3200top: use system_wq instead of dedicated workqueues
i2o: use alloc_workqueue() instead of create_workqueue()
acpi: kacpi*_wq don't need WQ_MEM_RECLAIM
fs/aio: aio_wq isn't used in memory reclaim path
input/tps6507x-ts: use system_wq instead of dedicated workqueue
cpufreq: use system_wq instead of dedicated workqueues
wireless/ipw2x00: use system_wq instead of dedicated workqueues
arm/omap: use system_wq in mailbox
workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER
About one year ago, Wengang Wang tried some first steps
to add tracepoints to ocfs2. Hiss original patch is here:
http://oss.oracle.com/pipermail/ocfs2-devel/2009-November/005512.html
But as Steven Rostedt indicated in his article
http://lwn.net/Articles/383362/, we'd better have our trace
files resides in fs/ocfs2, so I rewrited the patch using the
method Steven mentioned in that article.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
mlog_exit is used to record the exit status of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.
This patch just try to remove it or change it. So:
1. if all the error paths already use mlog_errno, it is just removed.
Otherwise, it will be replaced by mlog_errno.
2. if it is used to print some return value, it is replaced with
mlog(0,...).
mlog_exit_ptr is changed to mlog(0.
All those mlog(0,...) will be replaced with trace events later.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
ENTRY is used to record the entry of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.
So for mlog_entry_void, we just remove it.
for mlog_entry(...), we replace it with mlog(0,...), and they
will be replace by trace event later.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Commit 2c442719e9 added some checks for proper
heartbeat mode when the o2cb stack is running. Unfortunately, it didn't
take into account that a userpsace stack could be running. Fix this by only
doing the check if o2cb is in use. This patch allows userspace stacks to
mount the fs again.
Cc: stable@kernel.org
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
ocfs2_quota_wq is not depended upon during memory reclaim and, with
cmwq, there's no reason to use a dedicated workqueue. Drop
ocfs2_quota_wq and use system_wq instead. dqi_sync_work is already
sync canceled on quota disable and no further synchronization is
necessary.
This change makes ocfs2_quota_setup/shutdown() noops. Both functions
removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
As Al Viro pointed out path resolution during Q_QUOTAON calls to quotactl
is prone to deadlocks. We hold s_umount semaphore for reading during the
path resolution and resolution itself may need to acquire the semaphore
for writing when e. g. autofs mountpoint is passed.
Solve the problem by performing the resolution before we get hold of the
superblock (and thus s_umount semaphore). The whole thing is complicated
by the fact that some filesystems (OCFS2) ignore the path argument. So to
distinguish between filesystem which want the path and which do not we
introduce new .quota_on_meta callback which does not get the path. OCFS2
then uses this callback instead of old .quota_on.
CC: Al Viro <viro@ZenIV.linux.org.uk>
CC: Christoph Hellwig <hch@lst.de>
CC: Ted Ts'o <tytso@mit.edu>
CC: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
RCU free the struct inode. This will allow:
- Subsequent store-free path walking patch. The inode must be consulted for
permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
to take i_lock no longer need to take sb_inode_list_lock to walk the list in
the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
page lock to follow page->mapping.
The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.
In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.
The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.
Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: (30 commits)
BKL: remove BKL from freevxfs
BKL: remove BKL from qnx4
autofs4: Only declare function when CONFIG_COMPAT is defined
autofs: Only declare function when CONFIG_COMPAT is defined
ncpfs: Lock socket in ncpfs while setting its callbacks
fs/locks.c: prepare for BKL removal
BKL: Remove BKL from ncpfs
BKL: Remove BKL from OCFS2
BKL: Remove BKL from squashfs
BKL: Remove BKL from jffs2
BKL: Remove BKL from ecryptfs
BKL: Remove BKL from afs
BKL: Remove BKL from USB gadgetfs
BKL: Remove BKL from autofs4
BKL: Remove BKL from isofs
BKL: Remove BKL from fat
BKL: Remove BKL from ext2 filesystem
BKL: Remove BKL from do_new_mount()
BKL: Remove BKL from cgroup
BKL: Remove BKL from NTFS
...
Currently, the default behavior of O_DIRECT writes was allowing
concurrent writing among nodes to the same file, with no cluster
coherency guaranteed (no EX lock held). This can leave stale data in
the cache for buffered reads on other nodes.
The new mount option introduce a chance to choose two different
behaviors for O_DIRECT writes:
* coherency=full, as the default value, will disallow
concurrent O_DIRECT writes by taking
EX locks.
* coherency=buffered, allow concurrent O_DIRECT writes
without EX lock among nodes, which
gains high performance at risk of
getting stale data on other nodes.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Functions such as ocfs2_recovery_init() make use of osb->max_slots.
Initialize osb->max_slots early so the functions may use the correct
value.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Adds support for heartbeat=global mount option. It ensures that the heartbeat
mode passed matches the one enabled on disk.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
OCFS2_FEATURE_INCOMPAT_CLUSTERINFO allows us to use sb->s_cluster_info for
both userspace and o2cb cluster stacks. It also allows us to extend cluster
info to include stack flags.
This patch also adds stackflags to sb->s_clusterinfo. It also introduces a
clusterinfo flag OCFS2_CLUSTER_O2CB_GLOBAL_HEARTBEAT to denote the enabled
global heartbeat mode.
This incompat flag can be set/cleared using tunefs.ocfs2 --fs-features. The
clusterinfo flag is set/cleared using tunefs.ocfs2 --update-cluster-stack.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
The BKL in ocfs2/dlmfs is used in put_super, fill_super and remount_fs
that are all three protected by the superblocks s_umount rw_semaphore.
The use in ocfs2_control_open is evidently unrelated and the function
is protected by ocfs2_control_lock.
Therefore it is safe to remove the BKL entirely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
This patch is a preparation necessary to remove the BKL from do_new_mount().
It explicitly adds calls to lock_kernel()/unlock_kernel() around
get_sb/fill_super operations for filesystems that still uses the BKL.
I've read through all the code formerly covered by the BKL inside
do_kern_mount() and have satisfied myself that it doesn't need the BKL
any more.
do_kern_mount() is already called without the BKL when mounting the rootfs
and in nfsctl. do_kern_mount() calls vfs_kern_mount(), which is called
from various places without BKL: simple_pin_fs(), nfs_do_clone_mount()
through nfs_follow_mountpoint(), afs_mntpt_do_automount() through
afs_mntpt_follow_link(). Both later functions are actually the filesystems
follow_link inode operation. vfs_kern_mount() is calling the specified
get_sb function and lets the filesystem do its job by calling the given
fill_super function.
Therefore I think it is safe to push down the BKL from the VFS to the
low-level filesystems get_sb/fill_super operation.
[arnd: do not add the BKL to those file systems that already
don't use it elsewhere]
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Christoph Hellwig <hch@infradead.org>
Durring orphan scan, if we are slot 0, and we are replaying
orphan_dir:0001, the general process is that for every file
in this dir:
1. we will iget orphan_dir:0001, since there is no inode for it.
we will have to create an inode and read it from the disk.
2. do the normal work, such as delete_inode and remove it from
the dir if it is allowed.
3. call iput orphan_dir:0001 when we are done. In this case,
since we have no dcache for this inode, i_count will
reach 0, and VFS will have to call clear_inode and in
ocfs2_clear_inode we will checkpoint the inode which will let
ocfs2_cmt and journald begin to work.
4. We loop back to 1 for the next file.
So you see, actually for every deleted file, we have to read the
orphan dir from the disk and checkpoint the journal. It is very
time consuming and cause a lot of journal checkpoint I/O.
A better solution is that we can have another reference for these
inodes in ocfs2_super. So if there is no other race among
nodes(which will let dlmglue to checkpoint the inode), for step 3,
clear_inode won't be called and for step 1, we may only need to
read the inode for the 1st time. This is a big win for us.
So this patch will try to cache system inodes of other slots so
that we will have one more reference for these inodes and avoid
the extra inode read and journal checkpoint.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The OCFS2 developers have already done all of the hard work to allow
volumes larger than 16 TiB. But there is still a "sanity check" in
fs/ocfs2/super.c that prevents the mounting of such volumes, even when
the cluster size and journal options would allow it.
This patch replaces that sanity check with a more sophisticated one to
mount a huge volume provided that (a) it is addressable by the raw
word/address size of the system (borrowing a test from ext4); (b) the
volume is using JBD2; and (c) the JBD2_FEATURE_INCOMPAT_64BIT flag is
set on the journal.
I factored out the sanity check into its own function. I also moved it
from ocfs2_initialize_super() down to ocfs2_check_volume(); any earlier,
and the journal will not have been initialized yet.
This patch is one of a pair, and it depends on the other ("JBD2: Allow
feature checks before journal recovery").
I have tested this patch on small volumes, huge volumes, and huge
volumes without 64-bit block support in the journal. All of them appear
to work or to fail gracefully, as appropriate.
Signed-off-by: Patrick LoPresti <lopresti@gmail.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
Fix up trivial conflicts in fs/nilfs2/super.c
Follow the dquot_* style used elsewhere in dquot.c.
[Jan Kara: Fixed up missing conversion of ext2]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Remount handling has fully moved into the filesystem, so all this is
superflous now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Instead of having wrappers in the VFS namespace export the dquot_suspend
and dquot_resume helpers directly. Also rename vfs_quota_disable to
dquot_disable while we're at it.
[Jan Kara: Moved dquot_suspend to quotaops.h and made it inline]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
We also have to cancel quota syncing thread on remount read only because
at that moment quota is being turned off. Otherwise quota syncing thread
will try to access already freed quota structures.
Signed-off-by: Jan Kara <jack@suse.cz>
We cannot cancel delayed work from ocfs2_local_free_info because that is called
with dqonoff_mutex held and the work it cancels requires dqonoff_mutex to
finish. Cancel the work before acquiring dqonoff_mutex.
Acked-by: Joel Becker <Joel.Becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
ocfs2 sometimes needs to block signals around dlm operations, but it
currently does it with sigprocmask(). Even worse, it's checking the
error code of sigprocmask(). The in-kernel sigprocmask() can only error
if you get the SIG_* argument wrong. We don't.
Wrap the sigprocmask() calls with ocfs2_[un]block_signals(). These
functions are void, but they will BUG() if somehow sigprocmask() returns
an error.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
OCFS2 has never really supported intr. This patch acknowledges this reality
and makes nointr the default mount option. In a later patch, we intend to
support intr.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The default behavior for directory reservations stays the same, but we add a
mount option so people can tweak the size of directory reservations
according to their workloads.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
I have observed that the current size of 8M gives us pretty poor
fragmentation on multi-threaded workloads which do lots of writes.
Generally, I can increase the size of local alloc windows and observe a
marked decrease in fragmentation, even up and beyond window sizes of 512
megabytes. This makes sense for a couple reasons - larger local alloc means
more room for reservation windows. On multi-node workloads the larger local
alloc helps as well because we don't have to do window slides as often.
Also, I removed the OCFS2_DEFAULT_LOCAL_ALLOC_SIZE constant as it is no
longer used and the comment above it was out of date.
To test fragmentation, I used a workload which launched 4 threads that did
4k writes into a series of about 140 alternating files.
With resv_level=2, and a 4k/4k file system I observed the following average
fragmentation for various localalloc= parameters:
localalloc= avg. fragmentation
8 48
32 16
64 10
120 7
On larger cluster sizes, the difference is more dramatic.
The new default size top out at 256M, which we'll only get for cluster
sizes of 32K and above.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch pulls the local alloc sizing code into localalloc.c and provides
a callout to it from ocfs2_fill_super(). Behavior is essentially unchanged
except that I correctly calculate the maximum local alloc size. The old code
in ocfs2_parse_options() calculated the max size as:
ocfs2_local_alloc_size(sb) * 8
which is correct, in bits. Unfortunately though the option passed in is in
megabytes. Ultimately, this bug made no real difference - the shrink code
would catch a too-large size and bring it down to something reasonable.
Still, it's less than efficient as-is.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
