There have been lots of changes in ALSA core, HD-audio and ASoC, also
most of PCI drivers touched by conversions of printks. All these
resulted in a high volume and wide ranged patch sets in this release.
Many changes are fairly trivial, but also lots of nice cleanups and
refactors. There are a few new drivers, most notably, the Intel
Haswell and Baytrail ASoC driver.
Core changes:
- A bit modernization; embed the device struct into snd_card struct,
so that it may be referred from the beginning. A new snd_card_new()
function is introduced for that, and all drivers have been
converted.
- Simplification in the device management code in ALSA core;
now managed by a simple priority list instead
- Converted many kernel messages to use the standard dev_err() & co;
this would be the pretty visible difference, especially for
HD-audio.
HD-audio:
- Conexant codecs use the auto-parser as default now;
the old static code still remains in case of regressions.
Some old quirks have been rewritten with the fixups for auto-parser.
- C-Media codecs also use the auto-parser as default now, too.
- A device struct is assigned to each HD-audio codec, and the formerly
hwdep attributes are accessible over the codec sysfs, too.
hwdep attributes still remain for compatibility.
- Split the PCI-specific stuff for HD-audio controller into a separate
module, ane make a helper module for the generic controller driver.
This is a preliminary change for supporting Tegra HDMI controller in
near future, which slipped from 3.15 merge.
- Device-specific fixes: mute LED support for Lenovo Ideapad,
mic LED fix for HP laptops, more ASUS subwoofer quirks, yet more
Dell laptop headset quirks
- Make the HD-audio codec response a bit more robust
- A few improvements on Realtek ALC282 / 283 about the pop noises
- A couple of Intel HDMI fixes
ASoC:
- Lots of cleanups for enumerations; refactored lots of error prone
original codes to use more modern APIs
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle
- Provide both manually and transparently locked DAPM APIs rather than
a mix of the two fixing some concurrency issues
- Start converting CODEC drivers to use separate bus interface drivers
rather than having them all in one file helping avoid dependency
issues
- DPCM support for Intel Haswell and Bay Trail platforms, lots of
fixes
- Lots of work on improvements for simple-card, DaVinci and the Renesas
rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
CSR SiRF SoC, TLV320AIC31XXX, Armada 370 DB, Cirrus cs42xx8
- Fixes for the simple-card DAI format DT mess
- DT support for a couple more devices.
- Use of the tdm_slot mapping in a few drivers
Others:
- Support of reset_resume callback for improved S4 in USB-audio driver;
the device with boot quirks have been little tested, which we need
to watch out in this development cycle
- Add PM support for ICE1712 driver (finally!);
it's still pretty partial support, only for M-Audio devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJTOpQ/AAoJEGwxgFQ9KSmkTccP/RUxO1Coysvm+N+NUOtzvIgR
O++rMDpsFhBSRtB4YvaxAGWRnI629QBc8YSpebxX+KqrGyDe856abgMHydzXJ6hd
sM6//oaaZ8i0uXXzJza0/HXwIWHup9QcPVyFC4vAQq5mv6OCrH+Pvu7EXc0XbKh7
7B0ic28+AGPJTqV3sOx48AVzMvNnzPsKGriTWRUJ8Q6QnFqYrO0v6K9IH8/4pftg
2cihkA4JcIMNtoTSC/kSB3mXBvAX0ZFKQ2Juj1ukZxtXzaYmt9/ZLYPC+EM5OZrH
Bo4pXrpja38QlFBXYBbxXYWqCXQp+B7CPl8sNXF2rDaRhX8qcFrOP05uqV4wR5HW
AtCZjmhdvcYCbdUOv+Eck/HesRQMlIRKZN6/NAQBBN/WwrMMD1DmCODBke4uyg3+
Akb3yMQ0wXq/iSWRY0t5ejNGz9TV7V4NR1QoJS8+fgDnj1oP5sOAfr/BgZBcUIZ/
np8F77lTqqPqj9kPQnMRBEznvJvQxLRMAMxztCwgEr5520cxqNo02S3hNsOwF0xJ
t1K1iURZCFxNolSz68eSJOaXo7e77HPwiSze+JCRSfG5qJcltOlvgqO7UC/6wYcZ
2Z6tv3nGHzrQPVYR0aeWJXZJG8xIrr1Awg0P+G0ky6gfWCAGd7KBP6kYfuFVlytS
+ztGEe37SxgGGTisoMMh
=Y476
-----END PGP SIGNATURE-----
Merge tag 'sound-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There have been lots of changes in ALSA core, HD-audio and ASoC, also
most of PCI drivers touched by conversions of printks. All these
resulted in a high volume and wide ranged patch sets in this release.
Many changes are fairly trivial, but also lots of nice cleanups and
refactors. There are a few new drivers, most notably, the Intel
Haswell and Baytrail ASoC driver.
Core changes:
- A bit modernization; embed the device struct into snd_card struct,
so that it may be referred from the beginning. A new
snd_card_new() function is introduced for that, and all drivers
have been converted.
- Simplification in the device management code in ALSA core; now
managed by a simple priority list instead
- Converted many kernel messages to use the standard dev_err() & co;
this would be the pretty visible difference, especially for
HD-audio.
HD-audio:
- Conexant codecs use the auto-parser as default now; the old static
code still remains in case of regressions. Some old quirks have
been rewritten with the fixups for auto-parser.
- C-Media codecs also use the auto-parser as default now, too.
- A device struct is assigned to each HD-audio codec, and the
formerly hwdep attributes are accessible over the codec sysfs, too.
hwdep attributes still remain for compatibility.
- Split the PCI-specific stuff for HD-audio controller into a
separate module, ane make a helper module for the generic
controller driver. This is a preliminary change for supporting
Tegra HDMI controller in near future, which slipped from 3.15
merge.
- Device-specific fixes: mute LED support for Lenovo Ideapad, mic LED
fix for HP laptops, more ASUS subwoofer quirks, yet more Dell
laptop headset quirks
- Make the HD-audio codec response a bit more robust
- A few improvements on Realtek ALC282 / 283 about the pop noises
- A couple of Intel HDMI fixes
ASoC:
- Lots of cleanups for enumerations; refactored lots of error prone
original codes to use more modern APIs
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle
- Provide both manually and transparently locked DAPM APIs rather
than a mix of the two fixing some concurrency issues
- Start converting CODEC drivers to use separate bus interface
drivers rather than having them all in one file helping avoid
dependency issues
- DPCM support for Intel Haswell and Bay Trail platforms, lots of
fixes
- Lots of work on improvements for simple-card, DaVinci and the
Renesas rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of
the CSR SiRF SoC, TLV320AIC31XXX, Armada 370 DB, Cirrus cs42xx8
- Fixes for the simple-card DAI format DT mess
- DT support for a couple more devices.
- Use of the tdm_slot mapping in a few drivers
Others:
- Support of reset_resume callback for improved S4 in USB-audio
driver; the device with boot quirks have been little tested, which
we need to watch out in this development cycle
- Add PM support for ICE1712 driver (finally!); it's still pretty
partial support, only for M-Audio devices"
* tag 'sound-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (610 commits)
ALSA: ice1712: Add suspend support for M-Audio ICE1712-based cards
ALSA: ice1712: add suspend support for ICE1712 chip
ALSA: hda - Enable beep for ASUS 1015E
ALSA: asihpi: fix some indenting in snd_card_asihpi_pcm_new()
ALSA: hda - add headset mic detect quirks for three Dell laptops
ASoC: tegra: move AC97 clock handling to the machine driver
ASoC: simple-card: Handle many DAI links
ASoC: simple-card: Add DT documentation for multi-DAI links
ASoC: simple-card: dynamically allocate the DAI link and properties
ASoC: imx-ssi: Add .xlate_tdm_slot_mask() support.
ASoC: fsl-esai: Add .xlate_tdm_slot_mask() support.
ASoC: fsl-utils: Add fsl_asoc_xlate_tdm_slot_mask() support.
ASoC: core: remove the 'of_' prefix of of_xlate_tdm_slot_mask.
ASoC: rcar: subnode tidyup for renesas,rsnd.txt
ASoC: Remove name_prefix unset during DAI link init hack
ALSA: hda - Inform the unexpectedly ignored pins by auto-parser
ASoC: rcar: bugfix: it cares about the non-src case
ARM: bockw: fixup SND_SOC_DAIFMT_CBx_CFx flags
ASoC: pcm: Drop incorrect double/extra frees
ASoC: mfld_machine: Fix compile error
...
The fujitsu-laptop driver includes <linux/video_output.h> but doesn't
call any of its functions. Drop the unneeded include to avoid
unnecessary driver rebuilds.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI_VIDEO no longer depends on VIDEO_OUTPUT_CONTROL, so drivers which
want to select ACPI_VIDEO no longer have to select
VIDEO_OUTPUT_CONTROL.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Use deferred probing on Chrome OS platforms for the i2c
device registration. This fixes a long-standing race of initialization
of touchpad/screen on Chromebooks.
* Added in platform device registration for pstore console on supported hardware
* Misc smaller fixes (__initdata, module exit cleanup, etc)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJS6WRQAAoJEIwa5zzehBx39wUP/iJNehhevdHes2xStG+7IxUF
rSdHPgw8xLCtVSDYShxQbC5AojPbtE/g5UQAq1GGd0WYnWHlRiUCVlv6f5PpbuUL
K/CClarjfOqmAaPHpyxg6TOywVTXuKZZvMPqila04YPfPx8AnVYn8Itgdf4TNiOv
QXNyObGAszy5bVjMIYfmHytkKjNYqwbEctG+HTV8qFHlYbBPMNz47yUMPSZ5WDVQ
dMIARR0AKQW70rHkmBTxcL0xMeKNlUZeuA58/PmNMa6sy7vbl4192fXKd/6dK4Qm
6JDckdyiJvE1iW24fRBTTzuDSBo6q+4cSL0nKn1l0T0D/asTBta99Rse/+886B47
fbmCLgdShuMnd11axcBRirj+OiZDmFOFcMbIO8z8lOR+TsoLcfLAiAOyzm4sUy0v
FI7k3xeSRy+oELNkRXrciR7yYP/Zt2YeErL3qkMRy8BqDbIMpUb+FhdeZ+4uITXp
40u+Mwo5E4Pci5U1DKuBQpNW//inUN8F52Y4WG1RI5asBwo9i/zTm0ymSAb8+a4v
C8Yh0/mJUqr4aVct+NIcX67EotbqsoJ3FlEbfL2O1TmmE3NgfJ9BQ5D6xqmUzhQe
8WnMI7KZ3AwmARcigvWhfya/lilvE9e0IO95xKV/UsjrIwDWDqoA04xvkXhLOVMX
TPsq3plg9uRPFVRR0idm
=nO2m
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform
Pull chrome platform cleanups and improvements from Olof Johansson:
- Use deferred probing on Chrome OS platforms for the i2c device
registration. This fixes a long-standing race of initialization of
touchpad/screen on Chromebooks.
- Added in platform device registration for pstore console on supported
hardware
- Misc smaller fixes (__initdata, module exit cleanup, etc)
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform:
platform/chrome: unregister platform driver/device when module exit
platform/chrome: Make i2c_adapter_names static
platform/chrome: chromeos_laptop - fix incorrect placement of __initdata tag
platform/chrome: chromeos_laptop - Use deferred probing
platform/chrome: chromeos_laptop - Restructure device associations
platform/chrome: Add pstore platform_device
Pull x86 platform drivers update from Matthew Garrett:
"Nothing amazingly special here. Some cleanups, a new driver to
support a single button on some new HPs, a tiny amount of hardware
enablement"
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
ipc: add intel-mid's pci id macros
hp-wireless: new driver for hp wireless button for Windows 8
toshiba_acpi: Support RFKILL hotkey scancode
hp_accel: Add a new PnP ID HPQ6007 for new HP laptops
sony-laptop: remove unnecessary assigment of len
fujitsu-laptop: fix error return code
dell-laptop: Only install the i8042 filter when rfkill is active
X86 platform: New BayTrail IOSF-SB MBI driver
drivers: platform: Include appropriate header file in mxm-wmi.c
drivers: platform: Mark functions as static in hp_accel.c
dell-laptop: rkill whitelist Precision models
ipc: simplify platform data approach
asus-wmi: Convert to use devm_hwmon_device_register_with_groups
compal-laptop: Use devm_hwmon_device_register_with_groups
compal-laptop: Replace SENSOR_DEVICE_ATTR with DEVICE_ATTR
eeepc-laptop: Convert to use devm_hwmon_device_register_with_groups
compal-laptop: Use devm_kzalloc to allocate local data structure
dell-laptop: fix to return error code in dell_send_intensity()
- ACPI core changes to make it create a struct acpi_device object for every
device represented in the ACPI tables during all namespace scans regardless
of the current status of that device. In accordance with this, ACPI hotplug
operations will not delete those objects, unless the underlying ACPI tables
go away.
- On top of the above, new sysfs attribute for ACPI device objects allowing
user space to check device status by triggering the execution of _STA for
its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating the
PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the code
"glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for the
DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug
facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization earlier.
That should allow us to use ACPI during the timekeeping initialization
and possibly to simplify the EFI initialization too. From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over from
Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in drivers
that uses _DSM to execute it via the new helper. From Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo,
Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria,
Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support, from
Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias,
Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled
during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa,
Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a cpupower
tool cleanup from One Thousand Gnomes.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=dRf6
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"As far as the number of commits goes, the top spot belongs to ACPI
this time with cpufreq in the second position and a handful of PM
core, PNP and cpuidle updates. They are fixes and cleanups mostly, as
usual, with a couple of new features in the mix.
The most visible change is probably that we will create struct
acpi_device objects (visible in sysfs) for all devices represented in
the ACPI tables regardless of their status and there will be a new
sysfs attribute under those objects allowing user space to check that
status via _STA.
Consequently, ACPI device eject or generally hot-removal will not
delete those objects, unless the table containing the corresponding
namespace nodes is unloaded, which is extremely rare. Also ACPI
container hotplug will be handled quite a bit differently and cpufreq
will support CPU boost ("turbo") generically and not only in the
acpi-cpufreq driver.
Specifics:
- ACPI core changes to make it create a struct acpi_device object for
every device represented in the ACPI tables during all namespace
scans regardless of the current status of that device. In
accordance with this, ACPI hotplug operations will not delete those
objects, unless the underlying ACPI tables go away.
- On top of the above, new sysfs attribute for ACPI device objects
allowing user space to check device status by triggering the
execution of _STA for its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating
the PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the
code "glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for
the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
debug facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization
earlier. That should allow us to use ACPI during the timekeeping
initialization and possibly to simplify the EFI initialization too.
From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over
from Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in
drivers that uses _DSM to execute it via the new helper. From
Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
Rashika Kheria, Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support,
from Dirk Brandewie and intel_pstate documentation from Ramkumar
Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz
Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
disabled during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
Kurusa, Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a
cpupower tool cleanup from One Thousand Gnomes"
* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
Documentation: cpufreq / boost: Update BOOST documentation
cpufreq: exynos: Extend Exynos cpufreq driver to support boost
cpufreq / boost: Kconfig: Support for software-managed BOOST
acpi-cpufreq: Adjust the code to use the common boost attribute
cpufreq: Add boost frequency support in core
intel_pstate: Add trace point to report internal state.
cpufreq: introduce cpufreq_generic_get() routine
ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
cpufreq: stats: create sysfs entries when cpufreq_stats is a module
cpufreq: stats: free table and remove sysfs entry in a single routine
cpufreq: stats: remove hotplug notifiers
cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
cpufreq: speedstep: remove unused speedstep_get_state
platform: introduce OF style 'modalias' support for platform bus
PM / tools: new tool for suspend/resume performance optimization
ACPI: fix module autoloading for ACPI enumerated devices
ACPI: add module autoloading support for ACPI enumerated devices
ACPI: fix create_modalias() return value handling
...
For readability matters, this patch replaces the hardcoded pci ids by
human readable macros.
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This scancode is used in new 2013 models like Satellite P75-A7200.
Signed-off-by: Unai Uribarri <unaiur@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The DriveGuard chips on the new HP laptops are with a new PnP ID
"HPQ6007". It should be compatible with older chips.
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The assignment of len = len is unnecessary, so remove it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
These functions mix the use of result and error. In acpi_fujitsu_add,
result does not seem useful; it would seem reasonable to propagate the
return value of acpi_bus_update_power in an error case. On the other hand,
in the case of acpi_fujitsu_hotkey_add, there is an initialization of
result that can lead to what looks like a failure case, but that does not
abort the function. The variable result is kept for this case.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Installing the i8042 filter is not useful on machines where rfkill is not
whitelisted, so move the filter installation into dell_setup_rfkill,
after the whitelist check.
This avoids doing a needless and potentially troublesome rfkill query
(dell_send_request(buf, 17, 11)) when the wireless Fn key gets pressed on
non whitelisted laptops.
This patch was written as a result of:
https://bugzilla.redhat.com/show_bug.cgi?id=1045807
It is not yet clear if this is related, but it is a good idea to not register
the i8042 filter in general.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Current Intel SOC cores use a MailBox Interface (MBI) to provide access to unit
devices connected to the system fabric. This driver implements access to this
interface on BayTrail platforms. This is a requirement for drivers that need
access to unit registers on the platform (e.g. accessing the PUNIT for power
management features such as RAPL). Serialized access is handled by all exported
routines with spinlocks.
The API includes 3 functions for access to unit registers:
int bt_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
int bt_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
int bt_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)
port: indicating the unit being accessed
opcode: the read or write port specific opcode
offset: the register offset within the port
mdr: the register data to be read, written, or modified
mask: bit locations in mdr to change
Returns nonzero on error
Note: GPU code handles access to the GFX unit. Therefore access to that unit
with this driver is disallowed to avoid conflicts.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch includes appropriate header file linux/mxm-wmi.h in
x86/mxm-wmi.c because functions mxm_wmi_call_mxds(), mxm_wmi_call_mxmx()
and mxm_wmi_supported() have their prototype declaration in
linux/mxm-wmi.h.
Thus, it also eliminates the following warnings in x86/mxm-wmi.c:
drivers/platform/x86/mxm-wmi.c:43:5: warning: no previous prototype for ‘mxm_wmi_call_mxds’ [-Wmissing-prototypes]
drivers/platform/x86/mxm-wmi.c:68:5: warning: no previous prototype for ‘mxm_wmi_call_mxmx’ [-Wmissing-prototypes]
drivers/platform/x86/mxm-wmi.c:93:6: warning: no previous prototype for ‘mxm_wmi_supported’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch marks the functions lis3lv02d_acpi_init(),
lis3lv02d_acpi_read() and lis3lv02d_acpi_write() as static in
x86/hp_accel.c because they are not used outside this file.
Thus, it also eliminates the following warnings in x86/hp_accel.c:
drivers/platform/x86/hp_accel.c:91:5: warning: no previous prototype for ‘lis3lv02d_acpi_init’ [-Wmissing-prototypes]
drivers/platform/x86/hp_accel.c:109:5: warning: no previous prototype for ‘lis3lv02d_acpi_read’ [-Wmissing-prototypes]
drivers/platform/x86/hp_accel.c:132:5: warning: no previous prototype for ‘lis3lv02d_acpi_write’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Given that Precision mobile workstations are top of the line Dell products,
I expect the functionality of rfkill there to be as reliable as on Latitudes
so whitelist Precisions.
https://bugzilla.kernel.org/show_bug.cgi?id=65731
Reported-by: Calum Lind <calumlind@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch removes the unnecessary enum for platform type to handle the
array of pdatas. We can set pdata directly to pci_device_id struct
instead.
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Simplify the code and avoid race conditions due to late sysfs attribute
registration. Also replace SENSOR_DEVICE_ATTR with DEVICE_ATTR;
the additional parameter is not used and thus unnecessary.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Simplify the code and create hwmon attributes as well as hwmon device in one go.
With the new hwmon API, hwmon attributes are now attached to the hwmon device.
Therefore, split hwmon and device attributes into two separate groups.
Platform attributes are still attached to the platform device.
Also use devm_kzalloc to allocate local data structures for further
simplification.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The extra argument to SENSOR_DEVICE_ATTR is not used. It is therefore not
necessary to use SENSOR_DEVICE_ATTR in the first place. Replace it with
DEVICE_ATTR.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Simplify the code and avoid race condition caused by creating sysfs attributes
after creating the hwmon device.
Also replace SENSOR_DEVICE_ATTR with DEVICE_ATTR since the extra argument
is not used and SENSOR_DEVICE_ATTR is not needed.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Fix to return error code instead always return 0 from function
dell_send_intensity().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Multiple race conditions are possible between the rfkill hotplug in the
asus-wmi and eeepc-laptop drivers and the generic PCI bus rescan and device
removal that can be triggered via sysfs.
To avoid those race conditions make asus-wmi and eeepc-laptop use global
PCI rescan-remove locking around the rfkill hotplug.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* acpi-cleanup: (22 commits)
ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment.
ACPI / tables: Check if id is NULL in acpi_table_parse()
ACPI / proc: Include appropriate header file in proc.c
ACPI / EC: Remove unused functions and add prototype declaration in internal.h
ACPI / dock: Include appropriate header file in dock.c
ACPI / PCI: Include appropriate header file in pci_link.c
ACPI / PCI: Include appropriate header file in pci_slot.c
ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c
ACPI / NVS: Include appropriate header file in nvs.c
ACPI / OSL: Mark the function acpi_table_checksum() as static
ACPI / processor: initialize a variable to silence compiler warning
ACPI / processor: use ACPI_COMPANION() to get ACPI device
ACPI: correct minor typos
ACPI / sleep: Drop redundant acpi_disabled check
ACPI / dock: Drop redundant acpi_disabled check
ACPI / table: Replace '1' with specific error return values
ACPI: remove trailing whitespace
ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module
ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h>
SFI / ACPI: Fix warnings reported during builds with W=1
...
Conflicts:
drivers/acpi/nvs.c
drivers/hwmon/asus_atk0110.c
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.
First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.
Second, there are ordering dependencies between those files that always
have to be met. Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there. And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds. That also is taken care of including
<linux/acpi.h> as appropriate.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We have registered platform driver and device when module
init, and need unregister them when module exit.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Olof Johansson <olof@lixom.net>
Follow-up to commit 294d31e822 ("sony-laptop: don't change keyboard
backlight settings"): avoid messing up the state on resume. Leave it to
what was before suspending as it's anyway likely that we still don't
know what value we should write to the EC registers. This fix is also
required in 3.12
Cc: stable@vger.kernel.org
Tested-by: Karol Babioch <karol@babioch.de>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Not used outside of the file, so declaration should be static. Picked up by
sparse:
drivers/platform/chrome/chromeos_laptop.c:44:12: warning: symbol
'i2c_adapter_names' was not declared. Should it be static?
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Benson Leung <bleung@chromium.org>
__initdata tag should be placed between the variable name and equal
sign for the variable to be placed in the intended .init.data section.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Further refactor chromeos_laptop, adding a probe function.
Init will call dmi_check_system, but will only use the match to select
a chromeos_laptop structure of the current board.
Probe will add the devices, and on errors return -EPROBE_DEFER.
If i2c adapters are loaded after chromeos_laptop inits, the deferred
probe will instantiate the peripherals when the bus appears.
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The previous code had a single DMI matching entry
for each device on a board. Instead provide a single
DMI entry for each board which references a structure
about each board that lists the associated peripherals.
This allows for a lower number of DMI matching sequences
as well making it easier to add new boards.
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
I just fixed this same bug in arch/powerpc/kernel/vio.c and took a quick
look for other similar errors in the kernel.
modalias_show() should return an empty string on error, not errno.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch adds support for ipc command interrupt mode.
Also added platform data option to select 'irq_mode'
irq_mode = 1: configure the driver to receive IOC interrupt
for each successful ipc_command.
irq_mode = 0: makes driver use polling method to
track the command completion status.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Handle error conditions in intel_scu_ipc_command() and
pwr_reg_rdwr().
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Since the same ipc driver can be used by many platforms, using
macros for defining ipc_base and i2c_base addresses is not
a scalable approach. So added a platform data structure to pass
this information.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
SNDRV_CARDS can be specified via Kconfig since 3.11 kernel, so this
can be over 32bit integer range, which leads to a build error.
Cc: <stable@vger.kernel.org> [v3.11+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
It makes sense to split out the Chromebook/Chromebox hardware platform
drivers to a separate subdirectory, since some of it will be shared
between ARM and x86.
This moves over the existing chromeos_laptop driver without making
any other changes, and adds appropriate Kconfig entries for the new
directory. It also adds a MAINTAINERS entry for the new subdir.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some HP BIOS has dummy WMI 0x05 cmd and it causes wireless set cmd to fail.
This patch fixes the problem by detecting "2009 BIOS or later" flag which
determines whether WMI 0x1b is supported and is used to replace WMI 0x05.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Emitting an OOM message isn't necessary after input_allocate_device
as there's a generic OOM and a dump_stack already done.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some BIOS versions/Vaio models apparently ship with two nearly identical
functions to handle backlight related controls.
The only difference seems to be:
If (LEqual (BUF1, 0x40))
{
Store (0x40, P80H)
Store (BUF2, Local0)
- And (Local0, One, Local0)
+ And (Local0, 0x03, Local0)
Store (Local0, ^^H_EC.KLPC)
}
Avoid erroring out on initialization and messing things up on cleanup
for now since we never call into these methods with anything different
than 1 or 0.
This issue was found on a Sony VPCSE1V9E/BIOS R2087H4.
Cc: Marco Krüger <krgsch@gmail.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
All my testing has been on laptops with a hw killswitch, so to be on the
safe side disable rfkill functionality on models without a hw killswitch for
now. Once we gather some feedback on laptops without a hw killswitch this
decision maybe reconsidered.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Setting force_rfkill will cause the dell-laptop rfkill code to skip its
whitelist checks, this will allow individual users to override the whitelist,
as well as to gather info from users to improve the checks.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
