mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 12:28:41 +08:00
6a81051398
1471 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
6843306689 |
Including fixes from bluetooth, bpf and wireguard.
Current release - regressions: - nvme-tcp: fix comma-related oops after sendpage changes Current release - new code bugs: - ptp: make max_phase_adjustment sysfs device attribute invisible when not supported Previous releases - regressions: - sctp: fix potential deadlock on &net->sctp.addr_wq_lock - mptcp: - ensure subflow is unhashed before cleaning the backlog - do not rely on implicit state check in mptcp_listen() Previous releases - always broken: - net: fix net_dev_start_xmit trace event vs skb_transport_offset() - Bluetooth: - fix use-bdaddr-property quirk - L2CAP: fix multiple UaFs - ISO: use hci_sync for setting CIG parameters - hci_event: fix Set CIG Parameters error status handling - hci_event: fix parsing of CIS Established Event - MGMT: fix marking SCAN_RSP as not connectable - wireguard: queuing: use saner cpu selection wrapping - sched: act_ipt: various bug fixes for iptables <> TC interactions - sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX - dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging - eth: sfc: fix null-deref in devlink port without MAE access - eth: ibmvnic: do not reset dql stats on NON_FATAL err Misc: - xsk: honor SO_BINDTODEVICE on bind Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmSlu+MACgkQMUZtbf5S Irslgw//S7jf/GL8V6y8VL3te+/OPOZnLDTzFFOdy64/y97FE6XIacJUpyWRhtmz oSzcSNHETPW9U+xSGa2ZQlKhAXt6n9iRNvUegql+VBb13Iz+l7AdTeoxRv/YuwDo 5lTOIB6cBw+ATd0oxS6wr8SyUlcvktUKBfTAItjbVM55aXfIUpXIa84+F7avJgIA XP1u/3PHhwItmwo/hXhHH0+P0QA8ix1q2SvRB7DAlQLBsTuQhaKjXWQkYYTKw/Nt dtvh8iQSs/YXaHMjTa5CK28HOD8+ywIizr+uJ9VaNqIzV0W5JE9IE8P4NFpBcY7t kGjTYODOph7dkNmZ5RLj3N+B6CyC57OXDzoo/tr8940UytCLVj9EVyduarLGLx57 edqK9cUz5kWejyGoyZ4Pvlo/SKvCQ2HKMeiAJ0/nNpTJMFuygMoqGsaD6ttzkXMj fZLPjRUK3axd+15ZzhLEf8HyL5Qh+qPqqX9p7NljfMKwhxMWJ5fuICJfdGOSdMJR ndL+wPfRPFQwszZ4pbTY2Ivn29mo8ScBOSOEgQs2mOny+zFzTzmqNWz/jcFfQnjS cylxBEHrgudT2FuCImZ/v66TM5yakHXqIdpTGG+zsvJWQqjM96Z3I7WRvi0g9d75 n84il+j34mnzl90j2xEutqUiK7BQ9ZpZBsutPVTKBIHKWWiortI= =9yzk -----END PGP SIGNATURE----- Merge tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, bpf and wireguard. Current release - regressions: - nvme-tcp: fix comma-related oops after sendpage changes Current release - new code bugs: - ptp: make max_phase_adjustment sysfs device attribute invisible when not supported Previous releases - regressions: - sctp: fix potential deadlock on &net->sctp.addr_wq_lock - mptcp: - ensure subflow is unhashed before cleaning the backlog - do not rely on implicit state check in mptcp_listen() Previous releases - always broken: - net: fix net_dev_start_xmit trace event vs skb_transport_offset() - Bluetooth: - fix use-bdaddr-property quirk - L2CAP: fix multiple UaFs - ISO: use hci_sync for setting CIG parameters - hci_event: fix Set CIG Parameters error status handling - hci_event: fix parsing of CIS Established Event - MGMT: fix marking SCAN_RSP as not connectable - wireguard: queuing: use saner cpu selection wrapping - sched: act_ipt: various bug fixes for iptables <> TC interactions - sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX - dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging - eth: sfc: fix null-deref in devlink port without MAE access - eth: ibmvnic: do not reset dql stats on NON_FATAL err Misc: - xsk: honor SO_BINDTODEVICE on bind" * tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits) nfp: clean mc addresses in application firmware when closing port selftests: mptcp: pm_nl_ctl: fix 32-bit support selftests: mptcp: depend on SYN_COOKIES selftests: mptcp: userspace_pm: report errors with 'remove' tests selftests: mptcp: userspace_pm: use correct server port selftests: mptcp: sockopt: return error if wrong mark selftests: mptcp: sockopt: use 'iptables-legacy' if available selftests: mptcp: connect: fail if nft supposed to work mptcp: do not rely on implicit state check in mptcp_listen() mptcp: ensure subflow is unhashed before cleaning the backlog s390/qeth: Fix vipa deletion octeontx-af: fix hardware timestamp configuration net: dsa: sja1105: always enable the send_meta options net: dsa: tag_sja1105: fix MAC DA patching from meta frames net: Replace strlcpy with strscpy pptp: Fix fib lookup calls. mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX xsk: Honor SO_BINDTODEVICE on bind ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported ... |
||
Linus Torvalds
|
44aeec836d |
Char/Misc and other driver subsystem updates for 6.5-rc1
Here is the big set of char/misc and other driver subsystem updates for 6.5-rc1. Lots of different, tiny, stuff in here, from a range of smaller driver subsystems, including pulls from some substems directly: - IIO driver updates and additions - W1 driver updates and fixes (and a new maintainer!) - FPGA driver updates and fixes - Counter driver updates - Extcon driver updates - Interconnect driver updates - Coresight driver updates - mfd tree tag merge needed for other updates on top of that, lots of small driver updates as patches, including: - static const updates for class structures - nvmem driver updates - pcmcia driver fix - lots of other small driver updates and fixes All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKNMw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylhlQCfZrtz8RIbau8zbzh/CKpKBOmvHp4An3V64hbz recBPLH0ZACKl0wPl4iZ =A83A -----END PGP SIGNATURE----- Merge tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull Char/Misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem updates for 6.5-rc1. Lots of different, tiny, stuff in here, from a range of smaller driver subsystems, including pulls from some substems directly: - IIO driver updates and additions - W1 driver updates and fixes (and a new maintainer!) - FPGA driver updates and fixes - Counter driver updates - Extcon driver updates - Interconnect driver updates - Coresight driver updates - mfd tree tag merge needed for other updates on top of that, lots of small driver updates as patches, including: - static const updates for class structures - nvmem driver updates - pcmcia driver fix - lots of other small driver updates and fixes All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits) bsr: fix build problem with bsr_class static cleanup comedi: make all 'class' structures const char: xillybus: make xillybus_class a static const structure xilinx_hwicap: make icap_class a static const structure virtio_console: make port class a static const structure ppdev: make ppdev_class a static const structure char: misc: make misc_class a static const structure /dev/mem: make mem_class a static const structure char: lp: make lp_class a static const structure dsp56k: make dsp56k_class a static const structure bsr: make bsr_class a static const structure oradax: make 'cl' a static const structure hwtracing: hisi_ptt: Fix potential sleep in atomic context hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU hwtracing: hisi_ptt: Export available filters through sysfs hwtracing: hisi_ptt: Add support for dynamically updating the filter list hwtracing: hisi_ptt: Factor out filter allocation and release operation samples: pfsm: add CC_CAN_LINK dependency misc: fastrpc: check return value of devm_kasprintf() coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable() ... |
||
J.J. Martzki
|
a27ac53909 |
samples: pktgen: fix append mode failed issue
Each sample script sources functions.sh before parameters.sh which makes $APPEND undefined when trapping EXIT no matter in append mode or not. Due to this when sample scripts finished they always do "pgctrl reset" which resets pktgen config. So move trap to each script after sourcing parameters.sh and trap EXIT explicitly. Signed-off-by: J.J. Martzki <mars14850@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Linus Torvalds
|
d2a6fd45c5 |
Probes updates for v6.5:
- fprobe: Pass return address to the fprobe entry/exit callbacks so that the callbacks don't need to analyze pt_regs/stack to find the function return address. - kprobe events: cleanup usage of TPARG_FL_FENTRY and TPARG_FL_RETURN flags so that those are not set at once. - fprobe events: . Add a new fprobe events for tracing arbitrary function entry and exit as a trace event. . Add a new tracepoint events for tracing raw tracepoint as a trace event. This allows user to trace non user-exposed tracepoints. . Move eprobe's event parser code into probe event common file. . Introduce BTF (BPF type format) support to kernel probe (kprobe, fprobe and tracepoint probe) events so that user can specify traced function arguments by name. This also applies the type of argument when fetching the argument. . Introduce '$arg*' wildcard support if BTF is available. This expands the '$arg*' meta argument to all function argument automatically. . Check the return value types by BTF. If the function returns 'void', '$retval' is rejected. . Add some selftest script for fprobe events, tracepoint events and BTF support. . Update documentation about the fprobe events. . Some fixes for above features, document and selftests. - selftests for ftrace (except for new fprobe events): . Add a test case for multiple consecutive probes in a function which checks if ftrace based kprobe, optimized kprobe and normal kprobe can be defined in the same target function. . Add a test case for optimized probe, which checks whether kprobe can be optimized or not. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmSa+9MACgkQ2/sHvwUr PxsmOAgAmUOIWtvH5py7AZpIRhCj8B18F6KnT7w2hByCsRxf7SaCqMhpBCk9VnYv 9fJFBHpvYRJEmpHoH3o2ET5AGfKVNac9z96AGI2qJ4ECWITd6I5+WfTdZ5ueVn2d f6DQ10mHXDHSMFbuqfYWSHtkeivJpWpUNHhwzPb4doNOe06bZNfVuSgnksFg1at5 kq16HbvGnhPzdO4YHmvqwjmRHr5/nCI1KDE9xIBcqNtWFbiRigC11zaZEUkLX+vT F63ShyfCK718AiwDfnjXpGkXAiVOZuAIR8RELaSqQ92YHCFKq5k9K4++WllPR5f9 AxjVultFDiCd4oSPgYpQkjuZdFq9NA== =IhmY -----END PGP SIGNATURE----- Merge tag 'probes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes updates from Masami Hiramatsu: - fprobe: Pass return address to the fprobe entry/exit callbacks so that the callbacks don't need to analyze pt_regs/stack to find the function return address. - kprobe events: cleanup usage of TPARG_FL_FENTRY and TPARG_FL_RETURN flags so that those are not set at once. - fprobe events: - Add a new fprobe events for tracing arbitrary function entry and exit as a trace event. - Add a new tracepoint events for tracing raw tracepoint as a trace event. This allows user to trace non user-exposed tracepoints. - Move eprobe's event parser code into probe event common file. - Introduce BTF (BPF type format) support to kernel probe (kprobe, fprobe and tracepoint probe) events so that user can specify traced function arguments by name. This also applies the type of argument when fetching the argument. - Introduce '$arg*' wildcard support if BTF is available. This expands the '$arg*' meta argument to all function argument automatically. - Check the return value types by BTF. If the function returns 'void', '$retval' is rejected. - Add some selftest script for fprobe events, tracepoint events and BTF support. - Update documentation about the fprobe events. - Some fixes for above features, document and selftests. - selftests for ftrace (in addition to the new fprobe events): - Add a test case for multiple consecutive probes in a function which checks if ftrace based kprobe, optimized kprobe and normal kprobe can be defined in the same target function. - Add a test case for optimized probe, which checks whether kprobe can be optimized or not. * tag 'probes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/probes: Fix tracepoint event with $arg* to fetch correct argument Documentation: Fix typo of reference file name tracing/probes: Fix to return NULL and keep using current argc selftests/ftrace: Add new test case which checks for optimized probes selftests/ftrace: Add new test case which adds multiple consecutive probes in a function Documentation: tracing/probes: Add fprobe event tracing document selftests/ftrace: Add BTF arguments test cases selftests/ftrace: Add tracepoint probe test case tracing/probes: Add BTF retval type support tracing/probes: Add $arg* meta argument for all function args tracing/probes: Support function parameters if BTF is available tracing/probes: Move event parameter fetching code to common parser tracing/probes: Add tracepoint support on fprobe_events selftests/ftrace: Add fprobe related testcases tracing/probes: Add fprobe events for tracing function entry and exit. tracing/probes: Avoid setting TPARG_FL_FENTRY and TPARG_FL_RETURN fprobe: Pass return address to the handlers |
||
Linus Torvalds
|
3a8a670eee |
Networking changes for 6.5.
Core ---- - Rework the sendpage & splice implementations. Instead of feeding data into sockets page by page extend sendmsg handlers to support taking a reference on the data, controlled by a new flag called MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file to invoke an additional callback instead of trying to predict what the right combination of MORE/NOTLAST flags is. Remove the MSG_SENDPAGE_NOTLAST flag completely. - Implement SCM_PIDFD, a new type of CMSG type analogous to SCM_CREDENTIALS, but it contains pidfd instead of plain pid. - Enable socket busy polling with CONFIG_RT. - Improve reliability and efficiency of reporting for ref_tracker. - Auto-generate a user space C library for various Netlink families. Protocols --------- - Allow TCP to shrink the advertised window when necessary, prevent sk_rcvbuf auto-tuning from growing the window all the way up to tcp_rmem[2]. - Use per-VMA locking for "page-flipping" TCP receive zerocopy. - Prepare TCP for device-to-device data transfers, by making sure that payloads are always attached to skbs as page frags. - Make the backoff time for the first N TCP SYN retransmissions linear. Exponential backoff is unnecessarily conservative. - Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO). - Avoid waking up applications using TLS sockets until we have a full record. - Allow using kernel memory for protocol ioctl callbacks, paving the way to issuing ioctls over io_uring. - Add nolocalbypass option to VxLAN, forcing packets to be fully encapsulated even if they are destined for a local IP address. - Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure in-kernel ECMP implementation (e.g. Open vSwitch) select the same link for all packets. Support L4 symmetric hashing in Open vSwitch. - PPPoE: make number of hash bits configurable. - Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client (ipconfig). - Add layer 2 miss indication and filtering, allowing higher layers (e.g. ACL filters) to make forwarding decisions based on whether packet matched forwarding state in lower devices (bridge). - Support matching on Connectivity Fault Management (CFM) packets. - Hide the "link becomes ready" IPv6 messages by demoting their printk level to debug. - HSR: don't enable promiscuous mode if device offloads the proto. - Support active scanning in IEEE 802.15.4. - Continue work on Multi-Link Operation for WiFi 7. BPF --- - Add precision propagation for subprogs and callbacks. This allows maintaining verification efficiency when subprograms are used, or in fact passing the verifier at all for complex programs, especially those using open-coded iterators. - Improve BPF's {g,s}setsockopt() length handling. Previously BPF assumed the length is always equal to the amount of written data. But some protos allow passing a NULL buffer to discover what the output buffer *should* be, without writing anything. - Accept dynptr memory as memory arguments passed to helpers. - Add routing table ID to bpf_fib_lookup BPF helper. - Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands. - Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark maps as read-only). - Show target_{obj,btf}_id in tracing link fdinfo. - Addition of several new kfuncs (most of the names are self-explanatory): - Add a set of new dynptr kfuncs: bpf_dynptr_adjust(), bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size() and bpf_dynptr_clone(). - bpf_task_under_cgroup() - bpf_sock_destroy() - force closing sockets - bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs Netfilter --------- - Relax set/map validation checks in nf_tables. Allow checking presence of an entry in a map without using the value. - Increase ip_vs_conn_tab_bits range for 64BIT builds. - Allow updating size of a set. - Improve NAT tuple selection when connection is closing. Driver API ---------- - Integrate netdev with LED subsystem, to allow configuring HW "offloaded" blinking of LEDs based on link state and activity (i.e. packets coming in and out). - Support configuring rate selection pins of SFP modules. - Factor Clause 73 auto-negotiation code out of the drivers, provide common helper routines. - Add more fool-proof helpers for managing lifetime of MDIO devices associated with the PCS layer. - Allow drivers to report advanced statistics related to Time Aware scheduler offload (taprio). - Allow opting out of VF statistics in link dump, to allow more VFs to fit into the message. - Split devlink instance and devlink port operations. New hardware / drivers ---------------------- - Ethernet: - Synopsys EMAC4 IP support (stmmac) - Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches - Marvell 88E6250 7 port switches - Microchip LAN8650/1 Rev.B0 PHYs - MediaTek MT7981/MT7988 built-in 1GE PHY driver - WiFi: - Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps - Realtek RTL8723DS (SDIO variant) - Realtek RTL8851BE - CAN: - Fintek F81604 Drivers ------- - Ethernet NICs: - Intel (100G, ice): - support dynamic interrupt allocation - use meta data match instead of VF MAC addr on slow-path - nVidia/Mellanox: - extend link aggregation to handle 4, rather than just 2 ports - spawn sub-functions without any features by default - OcteonTX2: - support HTB (Tx scheduling/QoS) offload - make RSS hash generation configurable - support selecting Rx queue using TC filters - Wangxun (ngbe/txgbe): - add basic Tx/Rx packet offloads - add phylink support (SFP/PCS control) - Freescale/NXP (enetc): - report TAPRIO packet statistics - Solarflare/AMD: - support matching on IP ToS and UDP source port of outer header - VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6 - add devlink dev info support for EF10 - Virtual NICs: - Microsoft vNIC: - size the Rx indirection table based on requested configuration - support VLAN tagging - Amazon vNIC: - try to reuse Rx buffers if not fully consumed, useful for ARM servers running with 16kB pages - Google vNIC: - support TCP segmentation of >64kB frames - Ethernet embedded switches: - Marvell (mv88e6xxx): - enable USXGMII (88E6191X) - Microchip: - lan966x: add support for Egress Stage 0 ACL engine - lan966x: support mapping packet priority to internal switch priority (based on PCP or DSCP) - Ethernet PHYs: - Broadcom PHYs: - support for Wake-on-LAN for BCM54210E/B50212E - report LPI counter - Microsemi PHYs: support RGMII delay configuration (VSC85xx) - Micrel PHYs: receive timestamp in the frame (LAN8841) - Realtek PHYs: support optional external PHY clock - Altera TSE PCS: merge the driver into Lynx PCS which it is a variant of - CAN: Kvaser PCIEcan: - support packet timestamping - WiFi: - Intel (iwlwifi): - major update for new firmware and Multi-Link Operation (MLO) - configuration rework to drop test devices and split the different families - support for segmented PNVM images and power tables - new vendor entries for PPAG (platform antenna gain) feature - Qualcomm 802.11ax (ath11k): - Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID Advertisement (EMA) support in AP mode - support factory test mode - RealTek (rtw89): - add RSSI based antenna diversity - support U-NII-4 channels on 5 GHz band - RealTek (rtl8xxxu): - AP mode support for 8188f - support USB RX aggregation for the newer chips Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmSbJM4ACgkQMUZtbf5S IrtoDhAAhEim1+LBIKf4lhPcVdZ2p/TkpnwTz5jsTwSeRBAxTwuNJ2fQhFXg13E3 MnRq6QaEp8G4/tA/gynLvQop+FEZEnv+horP0zf/XLcC8euU7UrKdrpt/4xxdP07 IL/fFWsoUGNO+L9LNaHwBo8g7nHvOkPscHEBHc2Xrvzab56TJk6vPySfLqcpKlNZ CHWDwTpgRqNZzSKiSpoMVd9OVMKUXcPYHpDmfEJ5l+e8vTXmZzOLHrSELHU5nP5f mHV7gxkDCTshoGcaed7UTiOvgu1p6E5EchDJxiLaSUbgsd8SZ3u4oXwRxgj33RK/ fB2+UaLrRt/DdlHvT/Ph8e8Ygu77yIXMjT49jsfur/zVA0HEA2dFb7V6QlsYRmQp J25pnrdXmE15llgqsC0/UOW5J1laTjII+T2T70UOAqQl4LWYAQDG4WwsAqTzU0KY dueydDouTp9XC2WYrRUEQxJUzxaOaazskDUHc5c8oHp/zVBT+djdgtvVR9+gi6+7 yy4elI77FlEEqL0ItdU/lSWINayAlPLsIHkMyhSGKX0XDpKjeycPqkNx4UterXB/ JKIR5RBWllRft+igIngIkKX0tJGMU0whngiw7d1WLw25wgu4sB53hiWWoSba14hv tXMxwZs5iGaPcT38oRVMZz8I1kJM4Dz3SyI7twVvi4RUut64EG4= =9i4I -----END PGP SIGNATURE----- Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking changes from Jakub Kicinski: "WiFi 7 and sendpage changes are the biggest pieces of work for this release. The latter will definitely require fixes but I think that we got it to a reasonable point. Core: - Rework the sendpage & splice implementations Instead of feeding data into sockets page by page extend sendmsg handlers to support taking a reference on the data, controlled by a new flag called MSG_SPLICE_PAGES Rework the handling of unexpected-end-of-file to invoke an additional callback instead of trying to predict what the right combination of MORE/NOTLAST flags is Remove the MSG_SENDPAGE_NOTLAST flag completely - Implement SCM_PIDFD, a new type of CMSG type analogous to SCM_CREDENTIALS, but it contains pidfd instead of plain pid - Enable socket busy polling with CONFIG_RT - Improve reliability and efficiency of reporting for ref_tracker - Auto-generate a user space C library for various Netlink families Protocols: - Allow TCP to shrink the advertised window when necessary, prevent sk_rcvbuf auto-tuning from growing the window all the way up to tcp_rmem[2] - Use per-VMA locking for "page-flipping" TCP receive zerocopy - Prepare TCP for device-to-device data transfers, by making sure that payloads are always attached to skbs as page frags - Make the backoff time for the first N TCP SYN retransmissions linear. Exponential backoff is unnecessarily conservative - Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO) - Avoid waking up applications using TLS sockets until we have a full record - Allow using kernel memory for protocol ioctl callbacks, paving the way to issuing ioctls over io_uring - Add nolocalbypass option to VxLAN, forcing packets to be fully encapsulated even if they are destined for a local IP address - Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure in-kernel ECMP implementation (e.g. Open vSwitch) select the same link for all packets. Support L4 symmetric hashing in Open vSwitch - PPPoE: make number of hash bits configurable - Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client (ipconfig) - Add layer 2 miss indication and filtering, allowing higher layers (e.g. ACL filters) to make forwarding decisions based on whether packet matched forwarding state in lower devices (bridge) - Support matching on Connectivity Fault Management (CFM) packets - Hide the "link becomes ready" IPv6 messages by demoting their printk level to debug - HSR: don't enable promiscuous mode if device offloads the proto - Support active scanning in IEEE 802.15.4 - Continue work on Multi-Link Operation for WiFi 7 BPF: - Add precision propagation for subprogs and callbacks. This allows maintaining verification efficiency when subprograms are used, or in fact passing the verifier at all for complex programs, especially those using open-coded iterators - Improve BPF's {g,s}setsockopt() length handling. Previously BPF assumed the length is always equal to the amount of written data. But some protos allow passing a NULL buffer to discover what the output buffer *should* be, without writing anything - Accept dynptr memory as memory arguments passed to helpers - Add routing table ID to bpf_fib_lookup BPF helper - Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands - Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark maps as read-only) - Show target_{obj,btf}_id in tracing link fdinfo - Addition of several new kfuncs (most of the names are self-explanatory): - Add a set of new dynptr kfuncs: bpf_dynptr_adjust(), bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size() and bpf_dynptr_clone(). - bpf_task_under_cgroup() - bpf_sock_destroy() - force closing sockets - bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs Netfilter: - Relax set/map validation checks in nf_tables. Allow checking presence of an entry in a map without using the value - Increase ip_vs_conn_tab_bits range for 64BIT builds - Allow updating size of a set - Improve NAT tuple selection when connection is closing Driver API: - Integrate netdev with LED subsystem, to allow configuring HW "offloaded" blinking of LEDs based on link state and activity (i.e. packets coming in and out) - Support configuring rate selection pins of SFP modules - Factor Clause 73 auto-negotiation code out of the drivers, provide common helper routines - Add more fool-proof helpers for managing lifetime of MDIO devices associated with the PCS layer - Allow drivers to report advanced statistics related to Time Aware scheduler offload (taprio) - Allow opting out of VF statistics in link dump, to allow more VFs to fit into the message - Split devlink instance and devlink port operations New hardware / drivers: - Ethernet: - Synopsys EMAC4 IP support (stmmac) - Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches - Marvell 88E6250 7 port switches - Microchip LAN8650/1 Rev.B0 PHYs - MediaTek MT7981/MT7988 built-in 1GE PHY driver - WiFi: - Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps - Realtek RTL8723DS (SDIO variant) - Realtek RTL8851BE - CAN: - Fintek F81604 Drivers: - Ethernet NICs: - Intel (100G, ice): - support dynamic interrupt allocation - use meta data match instead of VF MAC addr on slow-path - nVidia/Mellanox: - extend link aggregation to handle 4, rather than just 2 ports - spawn sub-functions without any features by default - OcteonTX2: - support HTB (Tx scheduling/QoS) offload - make RSS hash generation configurable - support selecting Rx queue using TC filters - Wangxun (ngbe/txgbe): - add basic Tx/Rx packet offloads - add phylink support (SFP/PCS control) - Freescale/NXP (enetc): - report TAPRIO packet statistics - Solarflare/AMD: - support matching on IP ToS and UDP source port of outer header - VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6 - add devlink dev info support for EF10 - Virtual NICs: - Microsoft vNIC: - size the Rx indirection table based on requested configuration - support VLAN tagging - Amazon vNIC: - try to reuse Rx buffers if not fully consumed, useful for ARM servers running with 16kB pages - Google vNIC: - support TCP segmentation of >64kB frames - Ethernet embedded switches: - Marvell (mv88e6xxx): - enable USXGMII (88E6191X) - Microchip: - lan966x: add support for Egress Stage 0 ACL engine - lan966x: support mapping packet priority to internal switch priority (based on PCP or DSCP) - Ethernet PHYs: - Broadcom PHYs: - support for Wake-on-LAN for BCM54210E/B50212E - report LPI counter - Microsemi PHYs: support RGMII delay configuration (VSC85xx) - Micrel PHYs: receive timestamp in the frame (LAN8841) - Realtek PHYs: support optional external PHY clock - Altera TSE PCS: merge the driver into Lynx PCS which it is a variant of - CAN: Kvaser PCIEcan: - support packet timestamping - WiFi: - Intel (iwlwifi): - major update for new firmware and Multi-Link Operation (MLO) - configuration rework to drop test devices and split the different families - support for segmented PNVM images and power tables - new vendor entries for PPAG (platform antenna gain) feature - Qualcomm 802.11ax (ath11k): - Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID Advertisement (EMA) support in AP mode - support factory test mode - RealTek (rtw89): - add RSSI based antenna diversity - support U-NII-4 channels on 5 GHz band - RealTek (rtl8xxxu): - AP mode support for 8188f - support USB RX aggregation for the newer chips" * tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits) net: scm: introduce and use scm_recv_unix helper af_unix: Skip SCM_PIDFD if scm->pid is NULL. net: lan743x: Simplify comparison netlink: Add __sock_i_ino() for __netlink_diag_dump(). net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses Revert "af_unix: Call scm_recv() only after scm_set_cred()." phylink: ReST-ify the phylink_pcs_neg_mode() kdoc libceph: Partially revert changes to support MSG_SPLICE_PAGES net: phy: mscc: fix packet loss due to RGMII delays net: mana: use vmalloc_array and vcalloc net: enetc: use vmalloc_array and vcalloc ionic: use vmalloc_array and vcalloc pds_core: use vmalloc_array and vcalloc gve: use vmalloc_array and vcalloc octeon_ep: use vmalloc_array and vcalloc net: usb: qmi_wwan: add u-blox 0x1312 composition perf trace: fix MSG_SPLICE_PAGES build error ipvlan: Fix return value of ipvlan_queue_xmit() netfilter: nf_tables: fix underflow in chain reference counter netfilter: nf_tables: unbind non-anonymous set if rule construction fails ... |
||
Arnd Bergmann
|
a5052c85b9 |
samples: pfsm: add CC_CAN_LINK dependency
When no libc for the target architecture is available, cross-compiling
the same cannot work:
samples/pfsm/pfsm-wakeup.c:12:10: fatal error: fcntl.h: No such file or directory
Fixes:
|
||
Julien Panis
|
9e66fb5244 |
samples: Add userspace example for TI TPS6594 PFSM
This patch adds an example showing how to use PFSM devices from a userspace application. The PMIC is armed to be triggered by a RTC alarm to execute state transition. Signed-off-by: Julien Panis <jpanis@baylibre.com> Message-ID: <20230511095126.105104-7-jpanis@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Jim Cromie
|
dcb8cbb58a |
kmemleak-test: drop __init to get better backtrace
Drop the __init on kmemleak_test_init(). With it, the storage is reclaimed, but then the symbol isn't available for "%pS" rendering, and the backtrace gets a bare pointer where the actual leak happened. unreferenced object 0xffff88800a2b0800 (size 1024): comm "modprobe", pid 413, jiffies 4294953430 hex dump (first 32 bytes): 73 02 00 00 75 01 00 68 02 00 00 01 00 00 00 04 s...u..h........ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000fabad728>] kmalloc_trace+0x26/0x90 [<00000000ef738764>] 0xffffffffc02350a2 [<00000000004e5795>] do_one_initcall+0x43/0x210 [<00000000d768905e>] do_init_module+0x4a/0x210 [<0000000087135ab5>] __do_sys_finit_module+0x93/0xf0 [<000000004fcb1fa2>] do_syscall_64+0x34/0x80 [<00000000c73c8d9d>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 with __init gone, that trace entry renders like: [<00000000ef738764>] kmemleak_test_init+<offset>/<size> Link: https://lkml.kernel.org/r/20230525174356.69711-1-jim.cromie@gmail.com Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Masami Hiramatsu (Google)
|
cb16330d12 |
fprobe: Pass return address to the handlers
Pass return address as 'ret_ip' to the fprobe entry and return handlers so that the fprobe user handler can get the reutrn address without analyzing arch-dependent pt_regs. Link: https://lore.kernel.org/all/168507467664.913472.11642316698862778600.stgit@mhiramat.roam.corp.google.com/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
Jesper Dangaard Brouer
|
60548b825b |
samples/bpf: xdp1 and xdp2 reduce XDPBUFSIZE to 60
Default samples/pktgen scripts send 60 byte packets as hardware adds
4-bytes FCS checksum, which fulfils minimum Ethernet 64 bytes frame
size.
XDP layer will not necessary have access to the 4-bytes FCS checksum.
This leads to bpf_xdp_load_bytes() failing as it tries to copy 64-bytes
from an XDP packet that only have 60-bytes available.
Fixes:
|
||
Jakub Kicinski
|
d4031ec844 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: net/ipv4/raw.c |
||
Jakub Kicinski
|
a0e35a648f |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZGKqEAAKCRDbK58LschI g6LYAQDp1jAszCOkmJ8VUA0ZyC5NAFDv+7y9Nd1toYWYX1btzAEAkf8+5qBJ1qmI P5M0hjMTbH4MID9Aql10ZbMHheyOBAo= =NUQM -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-05-16 We've added 57 non-merge commits during the last 19 day(s) which contain a total of 63 files changed, 3293 insertions(+), 690 deletions(-). The main changes are: 1) Add precision propagation to verifier for subprogs and callbacks, from Andrii Nakryiko. 2) Improve BPF's {g,s}setsockopt() handling with wrong option lengths, from Stanislav Fomichev. 3) Utilize pahole v1.25 for the kernel's BTF generation to filter out inconsistent function prototypes, from Alan Maguire. 4) Various dyn-pointer verifier improvements to relax restrictions, from Daniel Rosenberg. 5) Add a new bpf_task_under_cgroup() kfunc for designated task, from Feng Zhou. 6) Unblock tests for arm64 BPF CI after ftrace supporting direct call, from Florent Revest. 7) Add XDP hint kfunc metadata for RX hash/timestamp for igc, from Jesper Dangaard Brouer. 8) Add several new dyn-pointer kfuncs to ease their usability, from Joanne Koong. 9) Add in-depth LRU internals description and dot function graph, from Joe Stringer. 10) Fix KCSAN report on bpf_lru_list when accessing node->ref, from Martin KaFai Lau. 11) Only dump unprivileged_bpf_disabled log warning upon write, from Kui-Feng Lee. 12) Extend test_progs to directly passing allow/denylist file, from Stephen Veiss. 13) Fix BPF trampoline memleak upon failure attaching to fentry, from Yafang Shao. 14) Fix emitting struct bpf_tcp_sock type in vmlinux BTF, from Yonghong Song. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (57 commits) bpf: Fix memleak due to fentry attach failure bpf: Remove bpf trampoline selector bpf, arm64: Support struct arguments in the BPF trampoline bpftool: JIT limited misreported as negative value on aarch64 bpf: fix calculation of subseq_idx during precision backtracking bpf: Remove anonymous union in bpf_kfunc_call_arg_meta bpf: Document EFAULT changes for sockopt selftests/bpf: Correctly handle optlen > 4096 selftests/bpf: Update EFAULT {g,s}etsockopt selftests bpf: Don't EFAULT for {g,s}setsockopt with wrong optlen libbpf: fix offsetof() and container_of() to work with CO-RE bpf: Address KCSAN report on bpf_lru_list bpf: Add --skip_encoding_btf_inconsistent_proto, --btf_gen_optimized to pahole flags for v1.25 selftests/bpf: Accept mem from dynptr in helper funcs bpf: verifier: Accept dynptr mem as mem in helpers selftests/bpf: Check overflow in optional buffer selftests/bpf: Test allowing NULL buffer in dynptr slice bpf: Allow NULL buffers in bpf_dynptr_slice(_rw) selftests/bpf: Add testcase for bpf_task_under_cgroup bpf: Add bpf_task_under_cgroup() kfunc ... ==================== Link: https://lore.kernel.org/r/20230515225603.27027-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Andrii Nakryiko
|
a820ca1a73 |
samples/bpf: Drop unnecessary fallthrough
__fallthrough is now not supported. Instead of renaming it to now-canonical ([0]) fallthrough pseudo-keyword, just get rid of it and equate 'h' case to default case, as both emit usage information and succeed. [0] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20230516001718.317177-1-andrii@kernel.org |
||
Pengcheng Yang
|
f4dea9689c |
samples/bpf: Fix buffer overflow in tcp_basertt
Using sizeof(nv) or strlen(nv)+1 is correct.
Fixes:
|
||
Linus Torvalds
|
611c9d8830 |
LoongArch changes for v6.4
1, Better backtraces for humanization; 2, Relay BCE exceptions to userland as SIGSEGV; 3, Provide kernel fpu functions; 4, Optimize memory ops (memset/memcpy/memmove); 5, Optimize checksum and crc32(c) calculation; 6, Add ARCH_HAS_FORTIFY_SOURCE selection; 7, Add function error injection support; 8, Add ftrace with direct call support; 9, Add basic perf tools support. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmRQlUsWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImekCTD/9fc2U+FIXhJOWV5yK9TCjJTRnK ASvk0JMYIDA60+fnof3C85tDu9Py9M5Mvt/Ec5pBaHErn16irq85AdD74/OmyCc2 V4pRFHbYLu0WBFQN77gfNXH0XErgYXdceZvaMXajVz2H6NlSKSWZOVN/9ut5SLi3 mt0rCwCsyahj92n8+hOjjZeFbDaPfPMCQ/8n9dnadhbBm9iz35fOKY+qIBHJMJ9a wPfZ2k3wu5DHs/2+ZjFNhlwrlURTp3RlcVQ7QWDcR1LM3Z4/lEkD8tAI/r8sR9gw rxzoBSaQzo/zscUmYo0jh1BoW2w0n+x/GfH70Pyz3iwZky3jwpdP0nRwnB4h+tnE wKlpa5K7RfaqUxZExFfGALmlkALtjQgiXPYbORHMsD6l6XwrOMCeyQismm1oo66m JBlsdXCms5aracYmWhXnVmTlBqGjAgYAxm62ap62uwlmULy4qUv6kFeW0fERn9NJ 5bKgbrkcal/WkMBawQqtG03niRkykqpqFooZ95ubj4Lib4VM0BmEvFrREjgXO7AE jpLimYsT9ROE3YQJqyWyLYkmc2ShwWj70INTpz2viMtQ2blIRKvRVsxs976bHuwS mGsZtiiANjhT2bAUhN7bct2Cf13MtPXiuf0etcJbrNSAtoBIFk+3uRRKHH2rM+CK oKYjO+exPyuQ9nSOBg== =3aTV -----END PGP SIGNATURE----- Merge tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Better backtraces for humanization - Relay BCE exceptions to userland as SIGSEGV - Provide kernel fpu functions - Optimize memory ops (memset/memcpy/memmove) - Optimize checksum and crc32(c) calculation - Add ARCH_HAS_FORTIFY_SOURCE selection - Add function error injection support - Add ftrace with direct call support - Add basic perf tools support * tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits) tools/perf: Add basic support for LoongArch LoongArch: ftrace: Add direct call trampoline samples support LoongArch: ftrace: Add direct call support LoongArch: ftrace: Implement ftrace_find_callable_addr() to simplify code LoongArch: ftrace: Fix build error if DYNAMIC_FTRACE_WITH_REGS is not set LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses LoongArch: Add support for function error injection LoongArch: Add ARCH_HAS_FORTIFY_SOURCE selection LoongArch: crypto: Add crc32 and crc32c hw acceleration LoongArch: Add checksum optimization for 64-bit system LoongArch: Optimize memory ops (memset/memcpy/memmove) LoongArch: Provide kernel fpu functions LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR LoongArch: Tweak the BADV and CPUCFG.PRID lines in show_regs() LoongArch: Humanize the ESTAT line when showing registers LoongArch: Humanize the ECFG line when showing registers LoongArch: Humanize the EUEN line when showing registers LoongArch: Humanize the PRMD line when showing registers LoongArch: Humanize the CRMD line when showing registers LoongArch: Fix format of CSR lines during show_regs() ... |
||
Youling Tang
|
22f367a689 |
LoongArch: ftrace: Add direct call trampoline samples support
The ftrace samples need per-architecture trampoline implementations to save and restore argument registers around the calls to my_direct_func* and to restore polluted registers (e.g: ra). Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Linus Torvalds
|
310897659c |
Rust changes for v6.4
More additions to the Rust core. Importantly, this adds the pin-init API, which will be used by other abstractions, such as the synchronization ones added here too: - pin-init API: a solution for the safe pinned initialization problem. This allows to reduce the need for 'unsafe' code in the kernel when dealing with data structures that require a stable address. Commit |
||
Linus Torvalds
|
d579c468d7 |
tracing updates for 6.4:
- User events are finally ready! After lots of collaboration between various parties, we finally locked down on a stable interface for user events that can also work with user space only tracing. This is implemented by telling the kernel (or user space library, but that part is user space only and not part of this patch set), where the variable is that the application uses to know if something is listening to the trace. There's also an interface to tell the kernel about these events, which will show up in the /sys/kernel/tracing/events/user_events/ directory, where it can be enabled. When it's enabled, the kernel will update the variable, to tell the application to start writing to the kernel. See https://lwn.net/Articles/927595/ - Cleaned up the direct trampolines code to simplify arm64 addition of direct trampolines. Direct trampolines use the ftrace interface but instead of jumping to the ftrace trampoline, applications (mostly BPF) can register their own trampoline for performance reasons. - Some updates to the fprobe infrastructure. fprobes are more efficient than kprobes, as it does not need to save all the registers that kprobes on ftrace do. More work needs to be done before the fprobes will be exposed as dynamic events. - More updates to references to the obsolete path of /sys/kernel/debug/tracing for the new /sys/kernel/tracing path. - Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer line by line instead of all at once. There's users in production kernels that have a large data dump that originally used printk() directly, but the data dump was larger than what printk() allowed as a single print. Using seq_buf() to do the printing fixes that. - Add /sys/kernel/tracing/touched_functions that shows all functions that was every traced by ftrace or a direct trampoline. This is used for debugging issues where a traced function could have caused a crash by a bpf program or live patching. - Add a "fields" option that is similar to "raw" but outputs the fields of the events. It's easier to read by humans. - Some minor fixes and clean ups. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZEr36xQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6quZHAQCzuqnn2S8DsPd3Sy1vKIYaj0uajW5D Kz1oUJH4F0H7kgEA8XwXkdtfKpOXWc/ZH4LWfL7Orx2wJZJQMV9dVqEPDAE= =w0Z1 -----END PGP SIGNATURE----- Merge tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - User events are finally ready! After lots of collaboration between various parties, we finally locked down on a stable interface for user events that can also work with user space only tracing. This is implemented by telling the kernel (or user space library, but that part is user space only and not part of this patch set), where the variable is that the application uses to know if something is listening to the trace. There's also an interface to tell the kernel about these events, which will show up in the /sys/kernel/tracing/events/user_events/ directory, where it can be enabled. When it's enabled, the kernel will update the variable, to tell the application to start writing to the kernel. See https://lwn.net/Articles/927595/ - Cleaned up the direct trampolines code to simplify arm64 addition of direct trampolines. Direct trampolines use the ftrace interface but instead of jumping to the ftrace trampoline, applications (mostly BPF) can register their own trampoline for performance reasons. - Some updates to the fprobe infrastructure. fprobes are more efficient than kprobes, as it does not need to save all the registers that kprobes on ftrace do. More work needs to be done before the fprobes will be exposed as dynamic events. - More updates to references to the obsolete path of /sys/kernel/debug/tracing for the new /sys/kernel/tracing path. - Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer line by line instead of all at once. There are users in production kernels that have a large data dump that originally used printk() directly, but the data dump was larger than what printk() allowed as a single print. Using seq_buf() to do the printing fixes that. - Add /sys/kernel/tracing/touched_functions that shows all functions that was every traced by ftrace or a direct trampoline. This is used for debugging issues where a traced function could have caused a crash by a bpf program or live patching. - Add a "fields" option that is similar to "raw" but outputs the fields of the events. It's easier to read by humans. - Some minor fixes and clean ups. * tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (41 commits) ring-buffer: Sync IRQ works before buffer destruction tracing: Add missing spaces in trace_print_hex_seq() ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus recordmcount: Fix memory leaks in the uwrite function tracing/user_events: Limit max fault-in attempts tracing/user_events: Prevent same address and bit per process tracing/user_events: Ensure bit is cleared on unregister tracing/user_events: Ensure write index cannot be negative seq_buf: Add seq_buf_do_printk() helper tracing: Fix print_fields() for __dyn_loc/__rel_loc tracing/user_events: Set event filter_type from type ring-buffer: Clearly check null ptr returned by rb_set_head_page() tracing: Unbreak user events tracing/user_events: Use print_format_fields() for trace output tracing/user_events: Align structs with tabs for readability tracing/user_events: Limit global user_event count tracing/user_events: Charge event allocs to cgroups tracing/user_events: Update documentation for ABI tracing/user_events: Use write ABI in example tracing/user_events: Add ABI self-test ... |
||
Linus Torvalds
|
7fa8a8ee94 |
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread. - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav. - zsmalloc performance improvements from Sergey Senozhatsky. - Yue Zhao has found and fixed some data race issues around the alteration of memcg userspace tunables. - VFS rationalizations from Christoph Hellwig: - removal of most of the callers of write_one_page(). - make __filemap_get_folio()'s return value more useful - Luis Chamberlain has changed tmpfs so it no longer requires swap backing. Use `mount -o noswap'. - Qi Zheng has made the slab shrinkers operate locklessly, providing some scalability benefits. - Keith Busch has improved dmapool's performance, making part of its operations O(1) rather than O(n). - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd, permitting userspace to wr-protect anon memory unpopulated ptes. - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather than exclusive, and has fixed a bunch of errors which were caused by its unintuitive meaning. - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature, which causes minor faults to install a write-protected pte. - Vlastimil Babka has done some maintenance work on vma_merge(): cleanups to the kernel code and improvements to our userspace test harness. - Cleanups to do_fault_around() by Lorenzo Stoakes. - Mike Rapoport has moved a lot of initialization code out of various mm/ files and into mm/mm_init.c. - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for DRM, but DRM doesn't use it any more. - Lorenzo has also coverted read_kcore() and vread() to use iterators and has thereby removed the use of bounce buffers in some cases. - Lorenzo has also contributed further cleanups of vma_merge(). - Chaitanya Prakash provides some fixes to the mmap selftesting code. - Matthew Wilcox changes xfs and afs so they no longer take sleeping locks in ->map_page(), a step towards RCUification of pagefaults. - Suren Baghdasaryan has improved mmap_lock scalability by switching to per-VMA locking. - Frederic Weisbecker has reworked the percpu cache draining so that it no longer causes latency glitches on cpu isolated workloads. - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig logic. - Liu Shixin has changed zswap's initialization so we no longer waste a chunk of memory if zswap is not being used. - Yosry Ahmed has improved the performance of memcg statistics flushing. - David Stevens has fixed several issues involving khugepaged, userfaultfd and shmem. - Christoph Hellwig has provided some cleanup work to zram's IO-related code paths. - David Hildenbrand has fixed up some issues in the selftest code's testing of our pte state changing. - Pankaj Raghav has made page_endio() unneeded and has removed it. - Peter Xu contributed some rationalizations of the userfaultfd selftests. - Yosry Ahmed has fixed an issue around memcg's page recalim accounting. - Chaitanya Prakash has fixed some arm-related issues in the selftests/mm code. - Longlong Xia has improved the way in which KSM handles hwpoisoned pages. - Peter Xu fixes a few issues with uffd-wp at fork() time. - Stefan Roesch has changed KSM so that it may now be used on a per-process and per-cgroup basis. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96 eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY= =J+Dj -----END PGP SIGNATURE----- Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of switching from a user process to a kernel thread. - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav. - zsmalloc performance improvements from Sergey Senozhatsky. - Yue Zhao has found and fixed some data race issues around the alteration of memcg userspace tunables. - VFS rationalizations from Christoph Hellwig: - removal of most of the callers of write_one_page() - make __filemap_get_folio()'s return value more useful - Luis Chamberlain has changed tmpfs so it no longer requires swap backing. Use `mount -o noswap'. - Qi Zheng has made the slab shrinkers operate locklessly, providing some scalability benefits. - Keith Busch has improved dmapool's performance, making part of its operations O(1) rather than O(n). - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd, permitting userspace to wr-protect anon memory unpopulated ptes. - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather than exclusive, and has fixed a bunch of errors which were caused by its unintuitive meaning. - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature, which causes minor faults to install a write-protected pte. - Vlastimil Babka has done some maintenance work on vma_merge(): cleanups to the kernel code and improvements to our userspace test harness. - Cleanups to do_fault_around() by Lorenzo Stoakes. - Mike Rapoport has moved a lot of initialization code out of various mm/ files and into mm/mm_init.c. - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for DRM, but DRM doesn't use it any more. - Lorenzo has also coverted read_kcore() and vread() to use iterators and has thereby removed the use of bounce buffers in some cases. - Lorenzo has also contributed further cleanups of vma_merge(). - Chaitanya Prakash provides some fixes to the mmap selftesting code. - Matthew Wilcox changes xfs and afs so they no longer take sleeping locks in ->map_page(), a step towards RCUification of pagefaults. - Suren Baghdasaryan has improved mmap_lock scalability by switching to per-VMA locking. - Frederic Weisbecker has reworked the percpu cache draining so that it no longer causes latency glitches on cpu isolated workloads. - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig logic. - Liu Shixin has changed zswap's initialization so we no longer waste a chunk of memory if zswap is not being used. - Yosry Ahmed has improved the performance of memcg statistics flushing. - David Stevens has fixed several issues involving khugepaged, userfaultfd and shmem. - Christoph Hellwig has provided some cleanup work to zram's IO-related code paths. - David Hildenbrand has fixed up some issues in the selftest code's testing of our pte state changing. - Pankaj Raghav has made page_endio() unneeded and has removed it. - Peter Xu contributed some rationalizations of the userfaultfd selftests. - Yosry Ahmed has fixed an issue around memcg's page recalim accounting. - Chaitanya Prakash has fixed some arm-related issues in the selftests/mm code. - Longlong Xia has improved the way in which KSM handles hwpoisoned pages. - Peter Xu fixes a few issues with uffd-wp at fork() time. - Stefan Roesch has changed KSM so that it may now be used on a per-process and per-cgroup basis. * tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits) mm,unmap: avoid flushing TLB in batch if PTE is inaccessible shmem: restrict noswap option to initial user namespace mm/khugepaged: fix conflicting mods to collapse_file() sparse: remove unnecessary 0 values from rc mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area() hugetlb: pte_alloc_huge() to replace huge pte_alloc_map() maple_tree: fix allocation in mas_sparse_area() mm: do not increment pgfault stats when page fault handler retries zsmalloc: allow only one active pool compaction context selftests/mm: add new selftests for KSM mm: add new KSM process and sysfs knobs mm: add new api to enable ksm per process mm: shrinkers: fix debugfs file permissions mm: don't check VMA write permissions if the PTE/PMD indicates write permissions migrate_pages_batch: fix statistics for longterm pin retry userfaultfd: use helper function range_in_vma() lib/show_mem.c: use for_each_populated_zone() simplify code mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list() fs/buffer: convert create_page_buffers to folio_create_buffers fs/buffer: add folio_create_empty_buffers helper ... |
||
Linus Torvalds
|
cec24b8b6b |
Char/Misc drivers for 6.4-rc1
Here is the "big" set of char/misc and other driver subsystems for 6.4-rc1. It's pretty big, but due to the removal of pcmcia drivers, almost breaks even for number of lines added vs. removed, a nice change. Included in here are: - removal of unused PCMCIA drivers (finally!) - Interconnect driver updates and additions - Lots of IIO driver updates and additions - MHI driver updates - Coresight driver updates - NVMEM driver updates, which required some OF updates - W1 driver updates and a new maintainer to manage the subsystem - FPGA driver updates - New driver subsystem, CDX, for AMD systems - lots of other small driver updates and additions All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp5Eg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynSXgCg0kSw3vUYwpsnhAsQkoPw1QVA23sAn2edRCMa GEkPWjrROueCom7xbLMu =eR+P -----END PGP SIGNATURE----- Merge tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc drivers updates from Greg KH: "Here is the "big" set of char/misc and other driver subsystems for 6.4-rc1. It's pretty big, but due to the removal of pcmcia drivers, almost breaks even for number of lines added vs. removed, a nice change. Included in here are: - removal of unused PCMCIA drivers (finally!) - Interconnect driver updates and additions - Lots of IIO driver updates and additions - MHI driver updates - Coresight driver updates - NVMEM driver updates, which required some OF updates - W1 driver updates and a new maintainer to manage the subsystem - FPGA driver updates - New driver subsystem, CDX, for AMD systems - lots of other small driver updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits) mcb-lpc: Reallocate memory region to avoid memory overlapping mcb-pci: Reallocate memory region to avoid memory overlapping mcb: Return actual parsed size when reading chameleon table kernel/configs: Drop Android config fragments virt: acrn: Replace obsolete memalign() with posix_memalign() spmi: Add a check for remove callback when removing a SPMI driver spmi: fix W=1 kernel-doc warnings spmi: mtk-pmif: Drop of_match_ptr for ID table spmi: pmic-arb: Convert to platform remove callback returning void spmi: mtk-pmif: Convert to platform remove callback returning void spmi: hisi-spmi-controller: Convert to platform remove callback returning void w1: gpio: remove unnecessary ENOMEM messages w1: omap-hdq: remove unnecessary ENOMEM messages w1: omap-hdq: add SPDX tag w1: omap-hdq: allow compile testing w1: matrox: remove unnecessary ENOMEM messages w1: matrox: use inline over __inline__ w1: matrox: switch from asm to linux header w1: ds2482: do not use assignment in if condition w1: ds2482: drop unnecessary header ... |
||
Linus Torvalds
|
556eb8b791 |
Driver core changes for 6.4-rc1
Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5 LEGadNS38k5fs+73UaxV =7K4B -----END PGP SIGNATURE----- Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ... |
||
Linus Torvalds
|
6df969b77e |
iommufd for 6.4
Two series: - Reorganize how the hardware page table objects are managed, particularly their destruction flow. Increase the selftest test coverage in this area by creating a more complete mock iommu driver. This is preparation to add a replace operation for HWPT binding, which is done but waiting for the VFIO parts to complete so there is a user. - Split the iommufd support for "access" to make it two step - allocate an access then link it to an IOAS. Update VFIO and have VFIO always create an access even for the VFIO mdevs that never do DMA. This is also preperation for the replace VFIO series that will allow replace to work on access types as well. Three minor fixes: - Sykzaller found the selftest code didn't check for overflow when processing user VAs - smatch noted a .data item should have been static - Add a selftest that reproduces a syzkaller bug for batch carry already fixed in rc -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZEfgkQAKCRCFwuHvBreF YRw7AQD5BhiTzdTMlMPAasihb2ZITYs3MyiZrxICZuZf3CksLAD9FcO3aYPq01ge 7yHF+LeWHYq1dR6x7YTvcbc3apFFIgA= =0j6E -----END PGP SIGNATURE----- Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd updates from Jason Gunthorpe: "Two series: - Reorganize how the hardware page table objects are managed, particularly their destruction flow. Increase the selftest test coverage in this area by creating a more complete mock iommu driver. This is preparation to add a replace operation for HWPT binding, which is done but waiting for the VFIO parts to complete so there is a user. - Split the iommufd support for "access" to make it two step - allocate an access then link it to an IOAS. Update VFIO and have VFIO always create an access even for the VFIO mdevs that never do DMA. This is also preperation for the replace VFIO series that will allow replace to work on access types as well. Three minor fixes: - Sykzaller found the selftest code didn't check for overflow when processing user VAs - smatch noted a .data item should have been static - Add a selftest that reproduces a syzkaller bug for batch carry already fixed in rc" * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (21 commits) iommufd/selftest: Cover domain unmap with huge pages and access iommufd/selftest: Set varaiable mock_iommu_device storage-class-specifier to static vfio: Check the presence for iommufd callbacks in __vfio_register_dev() vfio/mdev: Uses the vfio emulated iommufd ops set in the mdev sample drivers vfio-iommufd: Make vfio_iommufd_emulated_bind() return iommufd_access ID vfio-iommufd: No need to record iommufd_ctx in vfio_device iommufd: Create access in vfio_iommufd_emulated_bind() iommu/iommufd: Pass iommufd_ctx pointer in iommufd_get_ioas() iommufd/selftest: Catch overflow of uptr and length iommufd/selftest: Add a selftest for iommufd_device_attach() with a hwpt argument iommufd/selftest: Make selftest create a more complete mock device iommufd/selftest: Rename the remaining mock device_id's to stdev_id iommufd/selftest: Rename domain_id to hwpt_id for FIXTURE iommufd_mock_domain iommufd/selftest: Rename domain_id to stdev_id for FIXTURE iommufd_ioas iommufd/selftest: Rename the sefltest 'device_id' to 'stdev_id' iommufd: Make iommufd_hw_pagetable_alloc() do iopt_table_add_domain() iommufd: Move iommufd_device to iommufd_private.h iommufd: Move ioas related HWPT destruction into iommufd_hw_pagetable_destroy() iommufd: Consistently manage hwpt_item iommufd: Add iommufd_lock_obj() around the auto-domains hwpts ... |
||
Linus Torvalds
|
6e98b09da9 |
Networking changes for 6.4.
Core ---- - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances. - Reduce compound page head access for zero-copy data transfers. - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible. - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance. - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking. - Add lockless accesses annotation to sk_err[_soft]. - Optimize again the skb struct layout. - Extends the skb drop reasons to make it usable by multiple subsystems. - Better const qualifier awareness for socket casts. BPF --- - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses. - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward. - Add more precise memory usage reporting for all BPF map types. - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params. - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton. - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities. - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc. - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps. - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps. - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree. - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them. - Add ARM32 USDT support to libbpf. - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations. Protocols --------- - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address. - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition. - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf. - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures. - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers. - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction. - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore. - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter --------- - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged. - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support. - The iptables 32bit compat interface isn't compiled in by default anymore. - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used. - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device. Driver API ---------- - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time. - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them. - Allow the page_pool to directly recycle the pages from safely localized NAPI. - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization. - Add YNL support for user headers and struct attrs. - Add partial YNL specification for devlink. - Add partial YNL specification for ethtool. - Add tc-mqprio and tc-taprio support for preemptible traffic classes. - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device. - Add basic LED support for switch/phy. - Add NAPI documentation, stop relaying on external links. - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space. - Add transceiver support and improve the error messages for CAN-FD controllers. New hardware / drivers ---------------------- - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers ------- - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors. - add support for configuring max SDU for each Tx queue. - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll. - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates. - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support Signed-off-by: Paolo Abeni <pabeni@redhat.com> -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmRI/mUSHHBhYmVuaUBy ZWRoYXQuY29tAAoJECkkeY3MjxOkgO0QAJGxpuN67YgYV0BIM+/atWKEEexJYG7B 9MMpU4jMO3EW/pUS5t7VRsBLUybLYVPmqCZoHodObDfnu59jiPOegb6SikJv/ZwJ Zw62PVk5MvDnQjlu4e6kDcGwkplteN08TlgI+a49BUTedpdFitrxHAYGW8f2fRO6 cK2XSld+ZucMoym5vRwf8yWS1BwdxnslPMxDJ+/8ZbWBZv44qAnG2vMB/kIx7ObC Vel/4m6MzTwVsLYBsRvcwMVbNNlZ9GuhztlTzEbfGA4ZhTadIAMgb5VTWXB84Ws7 Aic5wTdli+q+x6/2cxhbyeoVuB9HHObYmLBAciGg4GNljP5rnQBY3X3+KVZ/x9TI HQB7CmhxmAZVrO9pLARFV+ECrMTH2/dy3NyrZ7uYQ3WPOXJi8hJZjOTO/eeEGL7C eTjdz0dZBWIBK2gON/6s4nExXVQUTEF2ZsPi52jTTClKjfe5pz/ddeFQIWaY1DTm pInEiWPAvd28JyiFmhFNHsuIBCjX/Zqe2JuMfMBeBibDAC09o/OGdKJYUI15AiRf F46Pdb7use/puqfrYW44kSAfaPYoBiE+hj1RdeQfen35xD9HVE4vdnLNeuhRlFF9 aQfyIRHYQofkumRDr5f8JEY66cl9NiKQ4IVW1xxQfYDNdC6wQqREPG1md7rJVMrJ vP7ugFnttneg =ITVa -----END PGP SIGNATURE----- Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances - Reduce compound page head access for zero-copy data transfers - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking - Add lockless accesses annotation to sk_err[_soft] - Optimize again the skb struct layout - Extends the skb drop reasons to make it usable by multiple subsystems - Better const qualifier awareness for socket casts BPF: - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward - Add more precise memory usage reporting for all BPF map types - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them - Add ARM32 USDT support to libbpf - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations Protocols: - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter: - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support - The iptables 32bit compat interface isn't compiled in by default anymore - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device Driver API: - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them - Allow the page_pool to directly recycle the pages from safely localized NAPI - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization - Add YNL support for user headers and struct attrs - Add partial YNL specification for devlink - Add partial YNL specification for ethtool - Add tc-mqprio and tc-taprio support for preemptible traffic classes - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device - Add basic LED support for switch/phy - Add NAPI documentation, stop relaying on external links - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space - Add transceiver support and improve the error messages for CAN-FD controllers New hardware / drivers: - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers: - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors - add support for configuring max SDU for each Tx queue - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support" * tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits) net: phy: hide the PHYLIB_LEDS knob net: phy: marvell-88x2222: remove unnecessary (void*) conversions tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. net: amd: Fix link leak when verifying config failed net: phy: marvell: Fix inconsistent indenting in led_blink_set lan966x: Don't use xdp_frame when action is XDP_TX tsnep: Add XDP socket zero-copy TX support tsnep: Add XDP socket zero-copy RX support tsnep: Move skb receive action to separate function tsnep: Add functions for queue enable/disable tsnep: Rework TX/RX queue initialization tsnep: Replace modulo operation with mask net: phy: dp83867: Add led_brightness_set support net: phy: Fix reading LED reg property drivers: nfc: nfcsim: remove return value check of `dev_dir` net: phy: dp83867: Remove unnecessary (void*) conversions net: ethtool: coalesce: try to make user settings stick twice net: mana: Check if netdev/napi_alloc_frag returns single page net: mana: Rename mana_refill_rxoob and remove some empty lines net: veth: add page_pool stats ... |
||
Deming Wang
|
32118bdc94 |
virt: acrn: Replace obsolete memalign() with posix_memalign()
memalign() is obsolete according to its manpage. Replace memalign() with posix_memalign() and remove malloc.h include that was there for memalign(). As a pointer is passed into posix_memalign(), initialize *p to NULL to silence a warning about the function's return value being used as uninitialized (which is not valid anyway because the error is properly checked before p is returned). Signed-off-by: Deming Wang <wangdeming@inspur.com> Link: https://lore.kernel.org/r/20230412073041.2168-1-wangdeming@inspur.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Hao Ge
|
27d9a0fdb5 |
kmemleak-test: fix kmemleak_test.c build logic
kmemleak-test.c was moved to the samples directory in |
||
Rong Tao
|
4a1e885c6d |
samples/bpf: sampleip: Replace PAGE_OFFSET with _text address
Macro PAGE_OFFSET(0xffff880000000000) in sampleip_user.c is inaccurate, for example, in aarch64 architecture, this value depends on the CONFIG_ARM64_VA_BITS compilation configuration, this value defaults to 48, the corresponding PAGE_OFFSET is 0xffff800000000000, if we use the value defined in sampleip_user.c, then all KSYMs obtained by sampleip are (user) Symbol error due to PAGE_OFFSET error: $ sudo ./sampleip 1 Sampling at 99 Hertz for 1 seconds. Ctrl-C also ends. ADDR KSYM COUNT 0xffff80000810ceb8 (user) 1 0xffffb28ec880 (user) 1 0xffff8000080c82b8 (user) 1 0xffffb23fed24 (user) 1 0xffffb28944fc (user) 1 0xffff8000084628bc (user) 1 0xffffb2a935c0 (user) 1 0xffff80000844677c (user) 1 0xffff80000857a3a4 (user) 1 ... A few examples of addresses in the CONFIG_ARM64_VA_BITS=48 environment in the aarch64 environment: $ sudo head /proc/kallsyms ffff8000080a0000 T _text ffff8000080b0000 t gic_handle_irq ffff8000080b0000 T _stext ffff8000080b0000 T __irqentry_text_start ffff8000080b00b0 t gic_handle_irq ffff8000080b0230 t gic_handle_irq ffff8000080b03b4 T __irqentry_text_end ffff8000080b03b8 T __softirqentry_text_start ffff8000080b03c0 T __do_softirq ffff8000080b0718 T __entry_text_start We just need to replace the PAGE_OFFSET with the address _text in /proc/kallsyms to solve this problem: $ sudo ./sampleip 1 Sampling at 99 Hertz for 1 seconds. Ctrl-C also ends. ADDR KSYM COUNT 0xffffb2892ab0 (user) 1 0xffffb2b1edfc (user) 1 0xffff800008462834 __arm64_sys_ppoll 1 0xffff8000084b87f4 eventfd_read 1 0xffffb28e6788 (user) 1 0xffff8000081e96d8 rcu_all_qs 1 0xffffb2ada878 (user) 1 ... Signed-off-by: Rong Tao <rongtao@cestc.cn> Link: https://lore.kernel.org/r/tencent_A0E82E0BEE925285F8156D540731DF805F05@qq.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Jakub Kicinski
|
c2865b1122 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZDhSiwAKCRDbK58LschI g8cbAQCH4xrquOeDmYyGXFQGchHZAIj++tKg8ABU4+hYeJtrlwEA6D4W6wjoSZRk mLSptZ9qro8yZA86BvyPvlBT1h9ELQA= =StAc -----END PGP SIGNATURE----- Daniel Borkmann says: ==================== pull-request: bpf-next 2023-04-13 We've added 260 non-merge commits during the last 36 day(s) which contain a total of 356 files changed, 21786 insertions(+), 11275 deletions(-). The main changes are: 1) Rework BPF verifier log behavior and implement it as a rotating log by default with the option to retain old-style fixed log behavior, from Andrii Nakryiko. 2) Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params, from Christian Ehrig. 3) Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton, from Alexei Starovoitov. 4) Optimize hashmap lookups when key size is multiple of 4, from Anton Protopopov. 5) Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps, from David Vernet. 6) Add support for stashing local BPF kptr into a map value via bpf_kptr_xchg(). This is useful e.g. for rbtree node creation for new cgroups, from Dave Marchevsky. 7) Fix BTF handling of is_int_ptr to skip modifiers to work around tracing issues where a program cannot be attached, from Feng Zhou. 8) Migrate a big portion of test_verifier unit tests over to test_progs -a verifier_* via inline asm to ease {read,debug}ability, from Eduard Zingerman. 9) Several updates to the instruction-set.rst documentation which is subject to future IETF standardization (https://lwn.net/Articles/926882/), from Dave Thaler. 10) Fix BPF verifier in the __reg_bound_offset's 64->32 tnum sub-register known bits information propagation, from Daniel Borkmann. 11) Add skb bitfield compaction work related to BPF with the overall goal to make more of the sk_buff bits optional, from Jakub Kicinski. 12) BPF selftest cleanups for build id extraction which stand on its own from the upcoming integration work of build id into struct file object, from Jiri Olsa. 13) Add fixes and optimizations for xsk descriptor validation and several selftest improvements for xsk sockets, from Kal Conley. 14) Add BPF links for struct_ops and enable switching implementations of BPF TCP cong-ctls under a given name by replacing backing struct_ops map, from Kui-Feng Lee. 15) Remove a misleading BPF verifier env->bypass_spec_v1 check on variable offset stack read as earlier Spectre checks cover this, from Luis Gerhorst. 16) Fix issues in copy_from_user_nofault() for BPF and other tracers to resemble copy_from_user_nmi() from safety PoV, from Florian Lehner and Alexei Starovoitov. 17) Add --json-summary option to test_progs in order for CI tooling to ease parsing of test results, from Manu Bretelle. 18) Batch of improvements and refactoring to prep for upcoming bpf_local_storage conversion to bpf_mem_cache_{alloc,free} allocator, from Martin KaFai Lau. 19) Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations, from Quentin Monnet. 20) Fix attaching fentry/fexit/fmod_ret/lsm to modules by extracting the module name from BTF of the target and searching kallsyms of the correct module, from Viktor Malik. 21) Improve BPF verifier handling of '<const> <cond> <non_const>' to better detect whether in particular jmp32 branches are taken, from Yonghong Song. 22) Allow BPF TCP cong-ctls to write app_limited of struct tcp_sock. A built-in cc or one from a kernel module is already able to write to app_limited, from Yixin Shen. Conflicts: Documentation/bpf/bpf_devel_QA.rst |
||
Hao Zeng
|
23acb14af1 |
samples/bpf: Fix fout leak in hbm's run_bpf_prog
Fix fout being fopen'ed but then not subsequently fclose'd. In the affected branch, fout is otherwise going out of scope. Signed-off-by: Hao Zeng <zenghao@kylinos.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230411084349.1999628-1-zenghao@kylinos.cn |
||
Boqun Feng
|
f431c5c581 |
samples: rust: print: Add sample code for Arc printing
This both demonstrates the usage of different print format in Rust and serves as a selftest for the `Display` and `Debug` implementation of `Arc` and its friends. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Reviewed-by: Finn Behrens <fin@nyantec.com> Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com> Link: https://lore.kernel.org/r/20230207185216.1314638-3-boqun.feng@gmail.com [ Applied suggestions and reworded for fixing title typos. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
Yi Liu
|
0a782d15e1 |
vfio/mdev: Uses the vfio emulated iommufd ops set in the mdev sample drivers
This harmonizes the no-DMA devices (the vfio-mdev sample drivers) with the emulated devices (gvt-g, vfio-ap etc.). It makes it easier to add BIND_IOMMUFD user interface which requires to return an iommufd ID to represent the device/iommufd bond. Link: https://lore.kernel.org/r/20230327093351.44505-6-yi.l.liu@intel.com Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
Beau Belgrave
|
9211ddaa78 |
tracing/user_events: Use write ABI in example
The ABI has changed to use a remote write approach. Update the example to show the expected use of this new ABI. Also remove debugfs path and use tracefs to ensure example works in more environments. Link: https://lkml.kernel.org/r/20230328235219.203-9-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Masami Hiramatsu (Google)
|
39d954200b |
fprobe: Skip exit_handler if entry_handler returns !0
Skip hooking function return and calling exit_handler if the entry_handler() returns !0. Link: https://lkml.kernel.org/r/167526699798.433354.10998365726830117303.stgit@mhiramat.roam.corp.google.com Cc: Florent Revest <revest@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Masami Hiramatsu (Google)
|
76d0de5729 |
fprobe: Pass entry_data to handlers
Pass the private entry_data to the entry and exit handlers so that they can share the context data, something like saved function arguments etc. User must specify the private entry_data size by @entry_data_size field before registering the fprobe. Link: https://lkml.kernel.org/r/167526696173.433354.17408372048319432574.stgit@mhiramat.roam.corp.google.com Cc: Florent Revest <revest@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Florent Revest
|
da8bdfbd42 |
ftrace: Rename _ftrace_direct_multi APIs to _ftrace_direct APIs
Now that the original _ftrace_direct APIs are gone, the "_multi" suffixes only add confusion. Link: https://lkml.kernel.org/r/20230321140424.345218-5-revest@chromium.org Signed-off-by: Florent Revest <revest@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Florent Revest
|
23edf48309 |
ftrace: Replace uses of _ftrace_direct APIs with _ftrace_direct_multi
The _multi API requires that users keep their own ops but can enforce that an op is only associated to one direct call. Link: https://lkml.kernel.org/r/20230321140424.345218-3-revest@chromium.org Signed-off-by: Florent Revest <revest@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Florent Revest
|
59495740f7 |
ftrace: Let unregister_ftrace_direct_multi() call ftrace_free_filter()
A common pattern when using the ftrace_direct_multi API is to unregister the ops and also immediately free its filter. We've noticed it's very easy for users to miss calling ftrace_free_filter(). This adds a "free_filters" argument to unregister_ftrace_direct_multi() to both remind the user they should free filters and also to make their life easier. Link: https://lkml.kernel.org/r/20230321140424.345218-2-revest@chromium.org Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Florent Revest <revest@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Greg Kroah-Hartman
|
1aaba11da9 |
driver core: class: remove module * from class_create()
The module pointer in class_create() never actually did anything, and it shouldn't have been requred to be set as a parameter even if it did something. So just remove it and fix up all callers of the function in the kernel tree at the same time. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Ross Zwisler
|
27d7fdf06f |
bpf: use canonical ftrace path
The canonical location for the tracefs filesystem is at /sys/kernel/tracing. But, from Documentation/trace/ftrace.rst: Before 4.1, all ftrace tracing control files were within the debugfs file system, which is typically located at /sys/kernel/debug/tracing. For backward compatibility, when mounting the debugfs file system, the tracefs file system will be automatically mounted at: /sys/kernel/debug/tracing Many comments and samples in the bpf code still refer to this older debugfs path, so let's update them to avoid confusion. There are a few spots where the bpf code explicitly checks both tracefs and debugfs (tools/bpf/bpftool/tracelog.c and tools/lib/api/fs/fs.c) and I've left those alone so that the tools can continue to work with both paths. Signed-off-by: Ross Zwisler <zwisler@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20230313205628.1058720-2-zwisler@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Linus Torvalds
|
a8356cdb5b |
LoongArch changes for v6.3
1, Make -mstrict-align configurable; 2, Add kernel relocation and KASLR support; 3, Add single kernel image implementation for kdump; 4, Add hardware breakpoints/watchpoints support; 5, Add kprobes/kretprobes/kprobes_on_ftrace support; 6, Add LoongArch support for some selftests. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmP+9H0WHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImerz+D/98MjkLXM4qtgfAxuBKpVdEVA4U bzO19UlpqWlwTJbwrhf0GYsRrAis37PTVJG4eNORJairJ/oTkMtEEBPhwq0D9Whc URDEh+VrjzFztLsu2OlvzOA9gE7lpg+xAx2LKflP7ixlOELOWeercDLW3octp5/J CJDE8wPaw9tJrMHFWuiVybs03yZmY3YFV55JdWL9hY8Ryy4DY5997mruOfzjvHpl EfDgQM2zCn2JSQwaD+Kl3MHxHyRx07Tj2wnZAh9ptaGeptK/yplc7nqRwhe7BevS QwClhJNPICcOi+evZ7cDUY0PTL4evpw2KRnF1N4zw+58RhZECjVrCEJNdf6L1scj muptQngWKrE/TJvn4way3cJr44stSCtT71elPhn629S23my/CauMmFqCqKpYOPOf pxwzzCaqDcaZKwMu96qBkZS76tIrhoNeNFntj+C9RS+8ezY3+o144S3vF1A6A9Zb M4gwa2NiQuLqnCUwKK6dZkLQVX2NMIMViUkYNKdUStxNWx/K7fFmXcl0ycAFpGYp 8Q95LLH34jUrpSgqMSCmcylsPvNiN1QnuXFnw8Tu+zDthp5dOzio60tORLPM1ZUq gobPeGjeTQInq4eMCf2B5HH8fOMVtJyj6H4K9G1M6HUMg64UtcBp6BvEbwPxTxNN sIOFUjDfDnBiIXWF4w== =SzL5 -----END PGP SIGNATURE----- Merge tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Make -mstrict-align configurable - Add kernel relocation and KASLR support - Add single kernel image implementation for kdump - Add hardware breakpoints/watchpoints support - Add kprobes/kretprobes/kprobes_on_ftrace support - Add LoongArch support for some selftests. * tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (23 commits) selftests/ftrace: Add LoongArch kprobe args string tests support selftests/seccomp: Add LoongArch selftesting support tools: Add LoongArch build infrastructure samples/kprobes: Add LoongArch support LoongArch: Mark some assembler symbols as non-kprobe-able LoongArch: Add kprobes on ftrace support LoongArch: Add kretprobes support LoongArch: Add kprobes support LoongArch: Simulate branch and PC* instructions LoongArch: ptrace: Add hardware single step support LoongArch: ptrace: Add function argument access API LoongArch: ptrace: Expose hardware breakpoints to debuggers LoongArch: Add hardware breakpoints/watchpoints support LoongArch: kdump: Add crashkernel=YM handling LoongArch: kdump: Add single kernel image implementation LoongArch: Add support for kernel address space layout randomization (KASLR) LoongArch: Add support for kernel relocation LoongArch: Add la_abs macro implementation LoongArch: Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs LoongArch: Use la.pcrel instead of la.abs when it's trivially possible ... |
||
Linus Torvalds
|
cac85e4616 |
VFIO updates for v6.3-rc1
- Remove redundant resource check in vfio-platform. (Angus Chen) - Use GFP_KERNEL_ACCOUNT for persistent userspace allocations, allowing removal of arbitrary kernel limits in favor of cgroup control. (Yishai Hadas) - mdev tidy-ups, including removing the module-only build restriction for sample drivers, Kconfig changes to select mdev support, documentation movement to keep sample driver usage instructions with sample drivers rather than with API docs, remove references to out-of-tree drivers in docs. (Christoph Hellwig) - Fix collateral breakages from mdev Kconfig changes. (Arnd Bergmann) - Make mlx5 migration support match device support, improve source and target flows to improve pre-copy support and reduce downtime. (Yishai Hadas) - Convert additional mdev sysfs case to use sysfs_emit(). (Bo Liu) - Resolve copy-paste error in mdev mbochs sample driver Kconfig. (Ye Xingchen) - Avoid propagating missing reset error in vfio-platform if reset requirement is relaxed by module option. (Tomasz Duszynski) - Range size fixes in mlx5 variant driver for missed last byte and stricter range calculation. (Yishai Hadas) - Fixes to suspended vaddr support and locked_vm accounting, excluding mdev configurations from the former due to potential to indefinitely block kernel threads, fix underflow and restore locked_vm on new mm. (Steve Sistare) - Update outdated vfio documentation due to new IOMMUFD interfaces in recent kernels. (Yi Liu) - Resolve deadlock between group_lock and kvm_lock, finally. (Matthew Rosato) - Fix NULL pointer in group initialization error path with IOMMUFD. (Yan Zhao) -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmP5GC0bHGFsZXgud2ls bGlhbXNvbkByZWRoYXQuY29tAAoJECObm247sIsiGoMP/Ajgc05dq2HGt0ZdTj3d /2fgFa/8GXv9t/Md4neHkvKppeHsyL6R9s/OlGb2zQMrZ9wTurW5s4pW4fLIcpNV v1vyQSLYMCtj/FT3kG38fZdJwF9NGnC+B+bY4ak+V2rWaKs2vT6fUG6YpzxuBU3T jRD41frtszXIp3i8bIPfaoKt/SydUrx12UJAKSks4eDM4aOlxKhpc3VB1vwaSmHB MgZMRPVQOGUubKJWb3u07tYOd8NHpBpD3HVUb8IlB2//tSqSPgq3GaKr/B25YzH+ 192vgGrm19aKYQ4U0KPLSH4QGG01bia4LqArbVAhBMwzgKK1dE24dk2YBVj+yePx 5XXHWv85gLpkev5aLAxsN75/qCtwhYYYB9vBohp8jhXjQU1GXdj9DAht5+c5I3sk SZcczmtuZ10X2XXT7fA5iRsG7o3Uxg1VikxYLT0Zhu/0DLc+wQrvum+mmu3sKscx qcJyTQXhNTDFzBRRTw6KdyCShbG9gFITysf9Xw/n2y3bxzlfy3Ttf617auYFv6fQ ed3kGiT+S16U/dr2b99qQZyn1eIbzOSkz/oWOXwvCWoBdPTEks9f7pDn9Kk6O641 8tf7qj3vpkOccg71EbVCF6JV5JrhtXDOJVzWIkfQWkoi7qI4ONZ/EdEGTnWY77RY urbhuR4UO1iG0nX+yQIFXhDR =QqPa -----END PGP SIGNATURE----- Merge tag 'vfio-v6.3-rc1' of https://github.com/awilliam/linux-vfio Pull VFIO updates from Alex Williamson: - Remove redundant resource check in vfio-platform (Angus Chen) - Use GFP_KERNEL_ACCOUNT for persistent userspace allocations, allowing removal of arbitrary kernel limits in favor of cgroup control (Yishai Hadas) - mdev tidy-ups, including removing the module-only build restriction for sample drivers, Kconfig changes to select mdev support, documentation movement to keep sample driver usage instructions with sample drivers rather than with API docs, remove references to out-of-tree drivers in docs (Christoph Hellwig) - Fix collateral breakages from mdev Kconfig changes (Arnd Bergmann) - Make mlx5 migration support match device support, improve source and target flows to improve pre-copy support and reduce downtime (Yishai Hadas) - Convert additional mdev sysfs case to use sysfs_emit() (Bo Liu) - Resolve copy-paste error in mdev mbochs sample driver Kconfig (Ye Xingchen) - Avoid propagating missing reset error in vfio-platform if reset requirement is relaxed by module option (Tomasz Duszynski) - Range size fixes in mlx5 variant driver for missed last byte and stricter range calculation (Yishai Hadas) - Fixes to suspended vaddr support and locked_vm accounting, excluding mdev configurations from the former due to potential to indefinitely block kernel threads, fix underflow and restore locked_vm on new mm (Steve Sistare) - Update outdated vfio documentation due to new IOMMUFD interfaces in recent kernels (Yi Liu) - Resolve deadlock between group_lock and kvm_lock, finally (Matthew Rosato) - Fix NULL pointer in group initialization error path with IOMMUFD (Yan Zhao) * tag 'vfio-v6.3-rc1' of https://github.com/awilliam/linux-vfio: (32 commits) vfio: Fix NULL pointer dereference caused by uninitialized group->iommufd docs: vfio: Update vfio.rst per latest interfaces vfio: Update the kdoc for vfio_device_ops vfio/mlx5: Fix range size calculation upon tracker creation vfio: no need to pass kvm pointer during device open vfio: fix deadlock between group lock and kvm lock vfio: revert "iommu driver notify callback" vfio/type1: revert "implement notify callback" vfio/type1: revert "block on invalid vaddr" vfio/type1: restore locked_vm vfio/type1: track locked_vm per dma vfio/type1: prevent underflow of locked_vm via exec() vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR vfio: platform: ignore missing reset if disabled at module init vfio/mlx5: Improve the target side flow to reduce downtime vfio/mlx5: Improve the source side flow upon pre_copy vfio/mlx5: Check whether VF is migratable samples: fix the prompt about SAMPLE_VFIO_MDEV_MBOCHS vfio/mdev: Use sysfs_emit() to instead of sprintf() vfio-mdev: add back CONFIG_VFIO dependency ... |
||
Tiezhu Yang
|
a6484baa3b |
samples/kprobes: Add LoongArch support
Add LoongArch specific info in handler_pre() and handler_post(). Tested-by: Jeff Xie <xiehuan09@gmail.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Linus Torvalds
|
a93e884edf |
Driver core changes for 6.3-rc1
Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6 6oeFOjD3JDju3cQsfGgd =Su6W -----END PGP SIGNATURE----- Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ... |
||
Linus Torvalds
|
b72b5fecc1 |
tracing updates for 6.3:
- Add function names as a way to filter function addresses - Add sample module to test ftrace ops and dynamic trampolines - Allow stack traces to be passed from beginning event to end event for synthetic events. This will allow seeing the stack trace of when a task is scheduled out and recorded when it gets scheduled back in. - Add trace event helper __get_buf() to use as a temporary buffer when printing out trace event output. - Add kernel command line to create trace instances on boot up. - Add enabling of events to instances created at boot up. - Add trace_array_puts() to write into instances. - Allow boot instances to take a snapshot at the end of boot up. - Allow live patch modules to include trace events - Minor fixes and clean ups -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY/PaaBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qh5iAPoD0LKZzD33rhO5Ec4hoexE0DkqycP3 dvmOMbCBL8GkxwEA+d2gLz/EquSFm166hc4D79Sn3geCqvkwmy8vQWVjIQc= =M82D -----END PGP SIGNATURE----- Merge tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Add function names as a way to filter function addresses - Add sample module to test ftrace ops and dynamic trampolines - Allow stack traces to be passed from beginning event to end event for synthetic events. This will allow seeing the stack trace of when a task is scheduled out and recorded when it gets scheduled back in. - Add trace event helper __get_buf() to use as a temporary buffer when printing out trace event output. - Add kernel command line to create trace instances on boot up. - Add enabling of events to instances created at boot up. - Add trace_array_puts() to write into instances. - Allow boot instances to take a snapshot at the end of boot up. - Allow live patch modules to include trace events - Minor fixes and clean ups * tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits) tracing: Remove unnecessary NULL assignment tracepoint: Allow livepatch module add trace event tracing: Always use canonical ftrace path tracing/histogram: Fix stacktrace histogram Documententation tracing/histogram: Fix stacktrace key tracing/histogram: Fix a few problems with stacktrace variable printing tracing: Add BUILD_BUG() to make sure stacktrace fits in strings tracing/histogram: Don't use strlen to find length of stacktrace variables tracing: Allow boot instances to have snapshot buffers tracing: Add trace_array_puts() to write into instance tracing: Add enabling of events to boot instances tracing: Add creation of instances at boot command line tracing: Fix trace_event_raw_event_synth() if else statement samples: ftrace: Make some global variables static ftrace: sample: avoid open-coded 64-bit division samples: ftrace: Include the nospec-branch.h only for x86 tracing: Acquire buffer from temparary trace sequence tracing/histogram: Wrap remaining shell snippets in code blocks tracing/osnoise: No need for schedule_hrtimeout range bpf/tracing: Use stage6 of tracing to not duplicate macros ... |
||
Linus Torvalds
|
a5c95ca18a |
drm next for 6.3-rc1
Removals: - remove legacy dri1 drivers - - i810, mga, r128, savage, sis, tdfx, via New driver: - intel VPU accelerator driver - habanalabs comes via drm tree now drm/core: - use drm_dbg_ helpers in several places - Document defaults for CRTC backgrounds - Document use of drm_minor edid: - improve mode parsing and refactoring connector: - support analog TV mode property media: - add some common formats udmabuf: - add vmap/vunmap methods fourcc: - add XRGB1555 and RGB565 formats - document open source user waiver firmware: - fix color-format selection for system framebuffer format-helper: - Add conversion from XRGB8888 to various sysfb formats - Make XRGB8888 the only driver-emulated legacy format - Add conversion from XRGB8888 to XBGR8888 and ABGR8888 fb-helper: - fix preferred depth and bpp values across drivers - Avoid blank consoles from selecting an incorrect color format probe-helper: - Enable/disable HPD on connectors scheduler: - Fix lockup in drm_sched_entity_kill() - Deprecate drm_sched_resubmit_jobs() bridge: - remove unused functions - implement i2c probe_new in various drivers - ite-it6505: Locking fixes, Cache EDID data - ite-it66121: Support IT6610 chip - lontium-tl9611: Fix HDMI on DragonBoard 845c - parade-ps8640: Use atomic bridge functions - Support i.MX93 LDB plus DT bindings debugfs: - add per device helpers and convert drivers displayport: - mst fixes - add DP adaptive sync DPCD definitions fbdev: - always pick 32bpp as default - remove some unused code simpledrm: - support system memory framebuffers panel: - add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50 - Use ktime_get_boottime() to measure power-down delay - Fix auto-suspend delay - Visionox VTDR6130 AMOLED DSI - Support Himax HX8394 - Convert many drivers to common generic DSI write-sequence helper - AUO A030JTN01 ttm: - drop bo wait wrapper - fix MIPS build habanalabs: - moved driver to accel subsystem - gaudi2 decoder error improvement - more trace events - Gaudi2 abrupt reset by firmware support - add uAPI to flush memory transactions - add uAPI to pass through userspace reqs to fw - remove dma-buf export by handle amdgpu: - add new INFO queries for peak and min sclk/mclk for profile modes - Add PCIe info to the INFO IOCTL - secure display support for multiple displays - DML optimizations - DCN 3.2 updates - PSR updates - DP 2.1 updates - SR-IOV RAS updates - VCN RAS support - SMU 13.x updates - Switch 1 element arrays to flexible arrays - Add RAS support for DF 4.3 - Stack size improvements - S0ix rework - Allow 0 as a vram limit on APUs - Handle profiling modes for SMU13.x - Fix possible segfault in failure case - Rework FW requests to happen in early_init for all IPs so that we don't lose the sbios console if FW is missing - Fix power reporting on certain firmwares for CZN/RN - Allow S0ix without BIOS support - Enable freesync over PCon - Re-enable the AGP aperture on GMC 11.x amdkfd: - Error handling fixes - PASID fixes - Fix for cleared VRAM BOs - Fix cleanup if GPUVM creation fails - Memory accounting fix - Use resource_size rather than open codeing it - GC11 mGPU fix radeon: - Switch 1 element arrays to flexible arrays - Fix memory leak on shutdown - move to new logging i915: - Meteorlake display/OA/GSC fw/workarounds enabling - DP MST DSC support - Gamma/degamma readout support for the state checker - Enable SDP split support for DP 2.0 - Add probe blocking support to i915.force_probe parameter - Enable Xe HP 4tile support - Avoid display direct calls to uncore - Fix HuC delayed load memory leaks - Add DG2 workarounds Wa_18018764978 and Wa_18019271663 - Improve suspend / resume times with VT-d scanout workaround active - Fix DG2 visual corruption on small BAR systems by not forgetting to copy CCS aux state - Fix TLB invalidation for Gen12.50 video and compute engines - Enable HF-EEODB by switching HDMI, DP and LVDS to use struct drm_edid - Start using unversioned DMC firmware paths for new platforms - ELD refactor: Stop using hardware buffer, precompute ELD - lots of display code refactoring nouveau: - drop legacy ioctl support - replace 0-sized array msm: - dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform - Added bindings for SM8150 - dpu: Partial support for DSC on SM8150 and SM8250 - dpu: Fixed color transformation matrix being lost on suspend/resume - dp: Support SDM845 and SC8280XP platforms - dp: Support for limiting DP link rate via DT property - dsi: Validate display modes according to the DSI OPP table - dsi: DSI PHY support for the SM6375 platform - Add MSM_SUBMIT_BO_NO_IMPLICI - a2xx: Support to load legacy firmware - a6xx: GPU devcore dump updates for a650/a660 - GPU devfreq tuning and fixes - Turn 8960 HDMI PHY into clock provider, - Make 8960 HDMI PHY use PXO clock from DT etnaviv: - experimental versilicon NPU support - report GPU load via fdinfo format - MMU fault message improvements tegra: - rework syncpoint interrupt mediatek: - DSI timing fix - fix config deps ast: - various fixes exynos: - restore bridge chain order fixes gud: - convert to shadow plane buffers - perform flushing synchronously during atomic update - Use new debugfs helpers arm/hdlcd: - Use new debugfs helper ili9486: - Support 16-bit pixel data imx: - Split off IPUv3 driver mipi-dbi: - convert to DRM shadow-plane helpers - rsp driver changes - Support separate I/O-voltage supply mxsfb: - Depend on ARCH_MXS or ARCH_MXC sun4i: - convert to new TV mode property vc4: - convert to new TV mode property - kunit tests - Support RGB565 and RGB666 formats - convert dsi driver to bridge - Various HVS an CRTC fixes v3d: - Do not opencode drm_gem_object_lookup() virtio: - improve tracing vkms: - support small cursors in IGT tests - Fix SEGFAULT from incorrect GEM-buffer mapping rcar-du: - fixes and improvements -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmP2rKwACgkQDHTzWXnE hr7cZw//WNBHajGXWUnuhh5GEd5QDiEzC5cazNT+QE9XFuv/ZT/AxchZ+v2zAYM7 uZ0VhRrWq7y2OZtNQjQ9LSTUE1vAjXwTH5roIKWQH4Xl4r2iPpqBMpvYppptOaoP MEXqtTXAIjzxRPFFzXGuj4CnfsTUhLn8YM6roAJ+Q+banszxNL1XBPs8xO2isyko 6RFk4XHhIwhnL3GCCggNcxSQh2itZ6niytLXScO1YgoQ90eDVJl+RAEO14K10svL Dq5tImbuwze06blM8xZxjDRtlNu/0n3Y1VC4oCDvEZHQFq7gfMk5rc1GpBAz9MUT bBT9Ep4Q8Sp1xcyvxWSEDO8QV/C9y8Fr48CIfsJAxjtlLBuTvUZmSQI/jvoNeJmi G3pFY6QmuEkl2W9uxPQusFlRVnPrlO0KFMORgxg9w95xqT9Rb2+F6dAauIjuiZLR WgQPBy2wLxjxZek0am3U2b4B6EgPHLBEyfQge51Qh3EOL6rIZO3Yx+wAJVglTKRH WzSyMRx0LQKyG4soE8P7V3KNBdsSgsjgq1I5fPyiJ4ck06d7jOD+BZVEfbAdz9Mi eOxfCx3P83LCedKLfgQ652lc2BSgu+04N69/d06eNuSFbWgCl9Aw/4WmwGAQEP0w B7w+Od20psq2ffEz7GwO8BP9c6K++a5PvlsvhiSYJqjkHndgcMY= =HQUi -----END PGP SIGNATURE----- Merge tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "There are a bunch of changes all over in the usual places. Highlights: - habanalabs moves from misc to accel - first accel driver for Intel VPU (Versatile Processing Unit) inference engine - dropped all the ancient legacy DRI1 drivers. I think it's been at least 10 years since anyone has heard about these. - Intel DG2 updates and prelim Meteorlake enablement - etnaviv adds support for Versilicon NPU device (a GPU like engine with inference accelerators) Detailed summary: Removals: - remove legacy dri1 drivers: i810, mga, r128, savage, sis, tdfx, via New driver: - intel VPU accelerator driver - habanalabs comes via drm tree now drm/core: - use drm_dbg_ helpers in several places - Document defaults for CRTC backgrounds - Document use of drm_minor edid: - improve mode parsing and refactoring connector: - support analog TV mode property media: - add some common formats udmabuf: - add vmap/vunmap methods fourcc: - add XRGB1555 and RGB565 formats - document open source user waiver firmware: - fix color-format selection for system framebuffer format-helper: - Add conversion from XRGB8888 to various sysfb formats - Make XRGB8888 the only driver-emulated legacy format - Add conversion from XRGB8888 to XBGR8888 and ABGR8888 fb-helper: - fix preferred depth and bpp values across drivers - Avoid blank consoles from selecting an incorrect color format probe-helper: - Enable/disable HPD on connectors scheduler: - Fix lockup in drm_sched_entity_kill() - Deprecate drm_sched_resubmit_jobs() bridge: - remove unused functions - implement i2c probe_new in various drivers - ite-it6505: Locking fixes, Cache EDID data - ite-it66121: Support IT6610 chip - lontium-tl9611: Fix HDMI on DragonBoard 845c - parade-ps8640: Use atomic bridge functions - Support i.MX93 LDB plus DT bindings debugfs: - add per device helpers and convert drivers displayport: - mst fixes - add DP adaptive sync DPCD definitions fbdev: - always pick 32bpp as default - remove some unused code simpledrm: - support system memory framebuffers panel: - add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50 - Use ktime_get_boottime() to measure power-down delay - Fix auto-suspend delay - Visionox VTDR6130 AMOLED DSI - Support Himax HX8394 - Convert many drivers to common generic DSI write-sequence helper - AUO A030JTN01 ttm: - drop bo wait wrapper - fix MIPS build habanalabs: - moved driver to accel subsystem - gaudi2 decoder error improvement - more trace events - Gaudi2 abrupt reset by firmware support - add uAPI to flush memory transactions - add uAPI to pass through userspace reqs to fw - remove dma-buf export by handle amdgpu: - add new INFO queries for peak and min sclk/mclk for profile modes - Add PCIe info to the INFO IOCTL - secure display support for multiple displays - DML optimizations - DCN 3.2 updates - PSR updates - DP 2.1 updates - SR-IOV RAS updates - VCN RAS support - SMU 13.x updates - Switch 1 element arrays to flexible arrays - Add RAS support for DF 4.3 - Stack size improvements - S0ix rework - Allow 0 as a vram limit on APUs - Handle profiling modes for SMU13.x - Fix possible segfault in failure case - Rework FW requests to happen in early_init for all IPs so that we don't lose the sbios console if FW is missing - Fix power reporting on certain firmwares for CZN/RN - Allow S0ix without BIOS support - Enable freesync over PCon - Re-enable the AGP aperture on GMC 11.x amdkfd: - Error handling fixes - PASID fixes - Fix for cleared VRAM BOs - Fix cleanup if GPUVM creation fails - Memory accounting fix - Use resource_size rather than open codeing it - GC11 mGPU fix radeon: - Switch 1 element arrays to flexible arrays - Fix memory leak on shutdown - move to new logging i915: - Meteorlake display/OA/GSC fw/workarounds enabling - DP MST DSC support - Gamma/degamma readout support for the state checker - Enable SDP split support for DP 2.0 - Add probe blocking support to i915.force_probe parameter - Enable Xe HP 4tile support - Avoid display direct calls to uncore - Fix HuC delayed load memory leaks - Add DG2 workarounds Wa_18018764978 and Wa_18019271663 - Improve suspend / resume times with VT-d scanout workaround active - Fix DG2 visual corruption on small BAR systems by not forgetting to copy CCS aux state - Fix TLB invalidation for Gen12.50 video and compute engines - Enable HF-EEODB by switching HDMI, DP and LVDS to use struct drm_edid - Start using unversioned DMC firmware paths for new platforms - ELD refactor: Stop using hardware buffer, precompute ELD - lots of display code refactoring nouveau: - drop legacy ioctl support - replace 0-sized array msm: - dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform - Added bindings for SM8150 - dpu: Partial support for DSC on SM8150 and SM8250 - dpu: Fixed color transformation matrix being lost on suspend/resume - dp: Support SDM845 and SC8280XP platforms - dp: Support for limiting DP link rate via DT property - dsi: Validate display modes according to the DSI OPP table - dsi: DSI PHY support for the SM6375 platform - Add MSM_SUBMIT_BO_NO_IMPLICI - a2xx: Support to load legacy firmware - a6xx: GPU devcore dump updates for a650/a660 - GPU devfreq tuning and fixes - Turn 8960 HDMI PHY into clock provider, - Make 8960 HDMI PHY use PXO clock from DT etnaviv: - experimental versilicon NPU support - report GPU load via fdinfo format - MMU fault message improvements tegra: - rework syncpoint interrupt mediatek: - DSI timing fix - fix config deps ast: - various fixes exynos: - restore bridge chain order fixes gud: - convert to shadow plane buffers - perform flushing synchronously during atomic update - Use new debugfs helpers arm/hdlcd: - Use new debugfs helper ili9486: - Support 16-bit pixel data imx: - Split off IPUv3 driver mipi-dbi: - convert to DRM shadow-plane helpers - rsp driver changes - Support separate I/O-voltage supply mxsfb: - Depend on ARCH_MXS or ARCH_MXC sun4i: - convert to new TV mode property vc4: - convert to new TV mode property - kunit tests - Support RGB565 and RGB666 formats - convert dsi driver to bridge - Various HVS an CRTC fixes v3d: - Do not opencode drm_gem_object_lookup() virtio: - improve tracing vkms: - support small cursors in IGT tests - Fix SEGFAULT from incorrect GEM-buffer mapping rcar-du: - fixes and improvements" * tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm: (1455 commits) msm/fbdev: fix unused variable warning with clang. drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini() dma-buf: make kobj_type structure constant drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt() drm/amd/display: disable SubVP + DRR to prevent underflow drm/amd/display: Fail atomic_check early on normalize_zpos error drm/amd/pm: avoid unaligned access warnings drm/amd/display: avoid unaligned access warnings drm/amd/display: Remove duplicate/repeating expressions drm/amd/display: Remove duplicate/repeating expression drm/amd/display: Make variables declaration inside ifdef guard drm/amd/display: Fix excess arguments on kernel-doc drm/amd/display: Add previously missing includes drm/amd/amdgpu: Add function prototypes to headers drm/amd/display: Add function prototypes to headers drm/amd/display: Turn global functions into static drm/amd/display: remove unused _calculate_degamma_curve function drm/amd/display: remove unused func declaration from resource headers drm/amd/display: unset initial value for tf since it's never used drm/amd/display: camel case cleanup in color_gamma file ... |
||
Linus Torvalds
|
6c71297eaf |
for-linus-2023022201
-----BEGIN PGP SIGNATURE----- iQJSBAABCAA8FiEEoEVH9lhNrxiMPSyI7MXwXhnZSjYFAmP15aoeHGJlbmphbWlu LnRpc3NvaXJlc0ByZWRoYXQuY29tAAoJEOzF8F4Z2Uo2nwkP/Rcr5lZYKQ59ezoJ PwHx/0wO1Qpgd4fRwD5Mvxynmfoq20A6FZFpmtjUjNcP3dm3X2UJtXE3HkDECCFP 5daqTFOswFiPFtcMlIl+SHxNgIIlTodbqx9MAFj/7n5aihB54JpTHWsgbENj35Y1 RLHYDi0+wj69y9ctOkqKGWHp8Uf220RWrD7zZf7AJAc5cwot1kM00RSy9dSAJ0vB riZdCQqYwXbf4I1uFzthS6AdIIWcpmpZyYFnsF7F2xQADqCNXr1MTmG0uC+Ey/J/ 0PZXjkyMO/pNwxarRiXmBKnsJJlJajxRXGtpgKYZu8AnIaXuNu/z987Y1pZ/kYis OQSKib2bGWzT2MycqiuVVrOChIMvqmk2aPRvg73jojpSySYTKn1Jp/XHyXS8qkkQ HJ/u6VPpe42GdfOGM7V9ig+80z/5D5u1XJECoPpxyKHWQ8S7ZlczQjVT+a8nUuBV hPTiqAYE9NT6SQJ0b5z2uhBdGRzvAbCZzDCgvjE87zsRmLzFk/fzMdMPZrlADKMJ 3qu7ey2GYOBNfnDcJmPu5HmK/A9BaPZiZAMakqjGpezZbe+LGBNskXTRwPpNC+Dh 11pna0ns+vlxeT7nonO0JsYvsKWy0pPcBvhyUEHWsmHgyagRLIsvg01ezB/Ivu0O xYj3UPVEGTiwHBt9xnaZcIjRSPSZ =cBvC -----END PGP SIGNATURE----- Merge tag 'for-linus-2023022201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Benjamin Tissoires: - HID-BPF infrastructure: this allows to start using HID-BPF. Note that the mechanism to ship HID-BPF program through the kernel tree is still not implemented yet (but is planned). This should be a no-op for 99% of users. Also we are gaining kselftests for the HID tree (Benjamin Tissoires) - Some UAF fixes in workers when using uhid (Pietro Borrello & Benjamin Tissoires) - Constify hid_ll_driver (Thomas Weißschuh) - Allow more custom IIO sensors through HID (Philipp Jungkamp) - Logitech HID++ fixes for scroll wheel, protocol and debug (Bastien Nocera) - Some new device support: Steam Deck (Vicki Pfau), UClogic (José Expósito), Logitech G923 Xbox Edition steering wheel (Walt Holman), EVision keyboards (Philippe Valembois) - other assorted code cleanups and fixes * tag 'for-linus-2023022201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (99 commits) HID: mcp-2221: prevent UAF in delayed work hid: bigben_probe(): validate report count HID: asus: use spinlock to safely schedule workers HID: asus: use spinlock to protect concurrent accesses HID: bigben: use spinlock to safely schedule workers HID: bigben_worker() remove unneeded check on report_field HID: bigben: use spinlock to protect concurrent accesses HID: logitech-hidpp: Add myself to authors HID: logitech-hidpp: Retry commands when device is busy HID: logitech-hidpp: Add more debug statements HID: Add support for Logitech G923 Xbox Edition steering wheel HID: logitech-hidpp: Add Signature M650 HID: logitech-hidpp: Remove HIDPP_QUIRK_NO_HIDINPUT quirk HID: logitech-hidpp: Don't restart communication if not necessary HID: logitech-hidpp: Add constants for HID++ 2.0 error codes Revert "HID: logitech-hidpp: add a module parameter to keep firmware gestures" HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support HID: i2c-hid: goodix: Add mainboard-vddio-supply dt-bindings: HID: i2c-hid: goodix: Add mainboard-vddio-supply HID: i2c-hid: goodix: Stop tying the reset line to the regulator ... |
||
Benjamin Tissoires
|
904e28c6de |
Merge branch 'for-6.3/hid-bpf' into for-linus
Initial support of HID-BPF (Benjamin Tissoires) The history is a little long for this series, as it was intended to be sent for v6.2. However some last minute issues forced us to postpone it to v6.3. Conflicts: * drivers/hid/i2c-hid/Kconfig: commit |
||
Ross Zwisler
|
2455f0e124 |
tracing: Always use canonical ftrace path
The canonical location for the tracefs filesystem is at /sys/kernel/tracing. But, from Documentation/trace/ftrace.rst: Before 4.1, all ftrace tracing control files were within the debugfs file system, which is typically located at /sys/kernel/debug/tracing. For backward compatibility, when mounting the debugfs file system, the tracefs file system will be automatically mounted at: /sys/kernel/debug/tracing Many comments and Kconfig help messages in the tracing code still refer to this older debugfs path, so let's update them to avoid confusion. Link: https://lore.kernel.org/linux-trace-kernel/20230215223350.2658616-2-zwisler@google.com Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Ilya Leoshkevich
|
c0ca277bb8 |
samples/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
Use the new type-safe wrappers around bpf_obj_get_info_by_fd(). Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230214231221.249277-5-iii@linux.ibm.com |
||
Jakub Kicinski
|
de42873367 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY+bZrwAKCRDbK58LschI gzi4AP4+TYo0jnSwwkrOoN9l4f5VO9X8osmj3CXfHBv7BGWVxAD/WnvA3TDZyaUd agIZTkRs6BHF9He8oROypARZxTeMLwM= =nO1C -----END PGP SIGNATURE----- Daniel Borkmann says: ==================== pull-request: bpf-next 2023-02-11 We've added 96 non-merge commits during the last 14 day(s) which contain a total of 152 files changed, 4884 insertions(+), 962 deletions(-). There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c between commit |
||
Rong Tao
|
06744f2469 |
samples/bpf: Add openat2() enter/exit tracepoint to syscall_tp sample
Commit fe3300897cbf("samples: bpf: fix syscall_tp due to unused syscall") added openat() syscall tracepoints. This patch adds support for openat2() as well. Signed-off-by: Rong Tao <rongtao@cestc.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/tencent_9381CB1A158ED7ADD12C4406034E21A3AC07@qq.com |