Pull sparc fixes from David Miller:
"Fix opcode filtering for exceptions, and clean up defconfig"
* git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc:
sparc: sparc64_defconfig: remove duplicate CONFIGs
sparc64: Fix opcode filtering in handling of no fault loads
After my patch there is CONFIG_ATA defined twice.
Remove the duplicate one.
Same problem for CONFIG_HAPPYMEAL, except I added as builtin for boot
test with NFS.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: a57cdeb369 ("sparc: sparc64_defconfig: add necessary configs for qemu")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
is_no_fault_exception() has two bugs which were discovered via random
opcode testing with stress-ng. Both are caused by improper filtering
of opcodes.
The first bug can be triggered by a floating point store with a no-fault
ASI, for instance "sta %f0, [%g0] #ASI_PNF", opcode C1A01040.
The code first tests op3[5] (0x1000000), which denotes a floating
point instruction, and then tests op3[2] (0x200000), which denotes a
store instruction. But these bits are not mutually exclusive, and the
above mentioned opcode has both bits set. The intent is to filter out
stores, so the test for stores must be done first in order to have
any effect.
The second bug can be triggered by a floating point load with one of
the invalid ASI values 0x8e or 0x8f, which pass this check in
is_no_fault_exception():
if ((asi & 0xf2) == ASI_PNF)
An example instruction is "ldqa [%l7 + %o7] #ASI 0x8f, %f38",
opcode CF95D1EF. Asi values greater than 0x8b (ASI_SNFL) are fatal
in handle_ldf_stq(), and is_no_fault_exception() must not allow these
invalid asi values to make it that far.
In both of these cases, handle_ldf_stq() reacts by calling
sun4v_data_access_exception() or spitfire_data_access_exception(),
which call is_no_fault_exception() and results in an infinite
recursion.
Signed-off-by: Rob Gardner <rob.gardner@oracle.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- fix two regressions in core GPIO subsystem code: one NULL-pointer dereference
and one list corruption
- read GPIO line names from fwnode instead of using the generic device
properties to fix a regression on stm32mp151
- fixes to ACPI GPIO and gpio-pca953x to handle a regression in IRQ handling
on Intel Galileo
- update .gitignore in GPIO selftests
-----BEGIN PGP SIGNATURE-----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=nVo+
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A bunch of fixes for the GPIO subsystem. We have two regressions in
the core code spotted right after the merge window, a series of fixes
for ACPI GPIO and a subsequent fix for a related regression in
gpio-pca953x + a minor tweak in .gitignore and a rework of handling of
the gpio-line-names to remedy a regression in stm32mp151.
Summary:
- fix two regressions in core GPIO subsystem code: one NULL-pointer
dereference and one list corruption
- read GPIO line names from fwnode instead of using the generic
device properties to fix a regression on stm32mp151
- fixes to ACPI GPIO and gpio-pca953x to handle a regression in IRQ
handling on Intel Galileo
- update .gitignore in GPIO selftests"
* tag 'gpio-fixes-for-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Read "gpio-line-names" from a firmware node
gpio: pca953x: Set IRQ type when handle Intel Galileo Gen 2
gpiolib: acpi: Allow to find GpioInt() resource by name and index
gpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk
gpiolib: acpi: Add missing IRQF_ONESHOT
gpio: fix gpio-device list corruption
gpio: fix NULL-deref-on-deregistration regression
selftests: gpio: update .gitignore
- fix for overwritten exception handlers
- enable MIPS optimized crypto for all MIPS CPUs to improve wireguard
performance
-----BEGIN PGP SIGNATURE-----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=xWSR
-----END PGP SIGNATURE-----
Merge tag 'mips-fixes_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fixes for boot breakage because of misaligned FDTs
- fix for overwritten exception handlers
- enable MIPS optimized crypto for all MIPS CPUs to improve wireguard
performance
* tag 'mips-fixes_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kernel: Reserve exception base early to prevent corruption
MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes
crypto: mips/poly1305 - enable for all MIPS processors
MIPS: boot/compressed: Copy DTB to aligned address
BMIPS is one of the few platforms that do change the exception base.
After commit 2dcb396454 ("memblock: do not start bottom-up allocations
with kernel_end") we started seeing BMIPS boards fail to boot with the
built-in FDT being corrupted.
Before the cited commit, early allocations would be in the [kernel_end,
RAM_END] range, but after commit they would be within [RAM_START +
PAGE_SIZE, RAM_END].
The custom exception base handler that is installed by
bmips_ebase_setup() done for BMIPS5000 CPUs ends-up trampling on the
memory region allocated by unflatten_and_copy_device_tree() thus
corrupting the FDT used by the kernel.
To fix this, we need to perform an early reservation of the custom
exception space. Additional we reserve the first 4k (1k for R3k) for
either normal exception vector space (legacy CPUs) or special vectors
like cache exceptions.
Huge thanks to Serge for analysing and proposing a solution to this
issue.
Fixes: 2dcb396454 ("memblock: do not start bottom-up allocations with kernel_end")
Reported-by: Kamal Dasu <kdasu.kdev@gmail.com>
Debugged-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull sparc updates from David Miller:
"Just some more random bits from Al, including a conversion over to
generic extables"
* git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc:
sparc32: take ->thread.flags out
sparc32: get rid of fake_swapper_regs
sparc64: get rid of fake_swapper_regs
sparc32: switch to generic extables
sparc32: switch copy_user.S away from range exception table entries
sparc32: get rid of range exception table entries in checksum_32.S
sparc32: switch __bzero() away from range exception table entries
sparc32: kill lookup_fault()
sparc32: don't bother with lookup_fault() in __bzero()
The devicetree specification requires 8-byte alignment in
memory. This is now enforced by libfdt since commit 79edff1206
("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
which included the upstream commit 5e735860c478 ("libfdt: Check for
8-byte address alignment in fdt_ro_probe_()").
This broke the MIPS raw appended DTBs which would be appended to
the image immediately following the initramfs section. This ends
with a 32bit size, resulting in a 4-byte alignment of the DTB.
Fix by padding with zeroes to 8-bytes when MIPS_RAW_APPENDED_DTB
is defined.
Fixes: 79edff1206 ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
On STM32MP1, the GPIO banks are subnodes of pin-controller@50002000,
see arch/arm/boot/dts/stm32mp151.dtsi. The driver for
pin-controller@50002000 is in drivers/pinctrl/stm32/pinctrl-stm32.c
and iterates over all of its DT subnodes when registering each GPIO
bank gpiochip. Each gpiochip has:
- gpio_chip.parent = dev,
where dev is the device node of the pin controller
- gpio_chip.of_node = np,
which is the OF node of the GPIO bank
Therefore, dev_fwnode(chip->parent) != of_fwnode_handle(chip.of_node),
i.e. pin-controller@50002000 != pin-controller@50002000/gpio@5000*000.
The original code behaved correctly, as it extracted the "gpio-line-names"
from of_fwnode_handle(chip.of_node) = pin-controller@50002000/gpio@5000*000.
To achieve the same behaviour, read property from the firmware node.
Fixes: 7cba1a4d5e ("gpiolib: generalize devprop_gpiochip_set_names() for device properties")
Reported-by: Marek Vasut <marex@denx.de>
Reported-by: Roman Guskov <rguskov@dh-electronics.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The commit 0ea683931a ("gpio: dwapb: Convert driver to using the
GPIO-lib-based IRQ-chip") indeliberately made a regression on how
IRQ line from GPIO I²C expander is handled. I.e. it reveals that
the quirk for Intel Galileo Gen 2 misses the part of setting IRQ type
which previously was predefined by gpio-dwapb driver. Now, we have to
reorganize the approach to call necessary parts, which can be done via
ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk.
Without this fix and with above mentioned change the kernel hangs
on the first IRQ event with:
gpio gpiochip3: Persistence not supported for GPIO 1
irq 32, desc: 62f8fb50, depth: 0, count: 0, unhandled: 0
->handle_irq(): 41c7b0ab, handle_bad_irq+0x0/0x40
->irq_data.chip(): e03f1e72, 0xc2539218
->action(): 0ecc7e6f
->action->handler(): 8a3db21e, irq_default_primary_handler+0x0/0x10
IRQ_NOPROBE set
unexpected IRQ trap at vector 20
Fixes: ba8c90c618 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea683931a ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Currently only search by index is supported. However, in some cases
we might need to pass the quirks to the acpi_dev_gpio_irq_get().
For this, split out acpi_dev_gpio_irq_get_by() and replace
acpi_dev_gpio_irq_get() by calling above with NULL for name parameter.
Fixes: ba8c90c618 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea683931a ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
On some systems the ACPI tables has wrong pin number and instead of
having a relative one it provides an absolute one in the global GPIO
number space.
Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk to cope with such cases.
Fixes: ba8c90c618 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea683931a ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
fixed the following coccicheck:
./drivers/gpio/gpiolib-acpi.c:176:7-27: ERROR: Threaded IRQ with no
primary handler requested without IRQF_ONESHOT
Make sure threaded IRQs without a primary handler are always request
with IRQF_ONESHOT
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Make sure to hold the gpio_lock when removing the gpio device from the
gpio_devices list (when dropping the last reference) to avoid corrupting
the list when there are concurrent accesses.
Fixes: ff2b135922 ("gpio: make the gpiochip a real device")
Cc: stable@vger.kernel.org # 4.6
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Fix a NULL-pointer deference when deregistering the gpio character
device that was introduced by the recent stub-driver hack. When the new
"driver" is unbound as part of deregistration, driver core clears the
driver-data pointer which is used to retrieve the struct gpio_device in
its release callback.
Fix this by using container_of() in the release callback as should have
been done all along.
Fixes: 4731210c09 ("gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default")
Cc: Saravana Kannan <saravanak@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: syzbot+d27b4c8adbbff70fbfde@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The executable that we build for GPIO selftests was renamed to
gpio-mockup-cdev. Let's update .gitignore so that we don't show it
as an untracked file.
Fixes: 8bc395a6a2 ("selftests: gpio: rework and simplify test implementation")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
The MIPS Poly1305 implementation is generic MIPS code written such as to
support down to the original MIPS I and MIPS III ISA for the 32-bit and
64-bit variant respectively. Lift the current limitation then to enable
code for MIPSr1 ISA or newer processors only and have it available for
all MIPS processors.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: a11d055e7a ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation")
Cc: stable@vger.kernel.org # v5.5+
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Since 5.12-rc1, the Device Tree blob must now be properly aligned.
Therefore, the decompress routine must be careful to copy the blob at
the next aligned address after the kernel image.
This commit fixes the kernel sometimes not booting with a Device Tree
blob appended to it.
Fixes: 79edff1206 ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
- Fix wrong skipping for per-die aggregation in 'perf stat'.
- Fix race in signal handling on large core count machines, setting up signal
handlers earlier.
- Fix -F for branch & mem modes in 'perf report'.
- Fix the condition checks for max number of NUMA nodes in 'perf bench numa'.
- Fix crash in 'perf diff' error path.
- Fix filtering of empty build-ids in 'perf archive'.
- Ensure read cmdlines from libtraceevent are null terminated.
Recent regressions:
- Fix control fifo permissions in 'perf daemon'.
- Fix 'perf daemon' compile error with ASAN.
- Fix running 'perf daemon' test for non root user.
- Fix PERF_SAMPLE_WEIGHT_STRUCT 'perf test' failure on non-x86 arches.
- Fix event's PMU name parsing related to new drm/i915/gt
software-gt-awake-time event.
Fixes from compiler instrumentation:
- Fix leaks in 'perf test' entries, found using ASAN.
- Fix use-after-free when 'perf stat -r' option is used.
Arch specific:
- Fix bitmap for option om ARM's CS-ETM.
Documentation:
- Fix documentation of verbose options.
Build:
- Clean 'generated' directory used for creating the syscall table on x86.
- Fix ccache usage in $(CC) when generating arch errno table.
- Cast (struct timeval).tv_sec when printing, fixing the build with MUSL libc.
- Tighten snprintf() string precision to pass gcc check on some 32-bit arches.
- Update UAPI copies from the kernel sources.
- Fix regression on feature detection 'make clean' target.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYETKZwAKCRCyPKLppCJ+
J738AQD/oSMIvDtIzbXXgcW81vjKNRx4j2A1aP1CvPOzygdQ2wD6Ap4L8IYnbEkl
DSpJRiPVFbvXmNdAIM5aiD69sxltXg0=
=DnVm
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.12-2020-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Perf tool fixes:
- Fix wrong skipping for per-die aggregation in 'perf stat'.
- Fix race in signal handling on large core count machines, setting
up signal handlers earlier.
- Fix -F for branch & mem modes in 'perf report'.
- Fix the condition checks for max number of NUMA nodes in 'perf
bench numa'.
- Fix crash in 'perf diff' error path.
- Fix filtering of empty build-ids in 'perf archive'.
- Ensure read cmdlines from libtraceevent are null terminated.
Recent regressions:
- Fix control fifo permissions in 'perf daemon'.
- Fix 'perf daemon' compile error with ASAN.
- Fix running 'perf daemon' test for non root user.
- Fix PERF_SAMPLE_WEIGHT_STRUCT 'perf test' failure on non-x86
arches.
- Fix event's PMU name parsing related to new drm/i915/gt
software-gt-awake-time event.
Fixes from compiler instrumentation:
- Fix leaks in 'perf test' entries, found using ASAN.
- Fix use-after-free when 'perf stat -r' option is used.
Arch specific:
- Fix bitmap for option om ARM's CS-ETM.
Documentation:
- Fix documentation of verbose options.
Build:
- Clean 'generated' directory used for creating the syscall table on
x86.
- Fix ccache usage in $(CC) when generating arch errno table.
- Cast (struct timeval).tv_sec when printing, fixing the build with
MUSL libc.
- Tighten snprintf() string precision to pass gcc check on some
32-bit arches.
- Update UAPI copies from the kernel sources.
- Fix regression on feature detection 'make clean' target"
* tag 'perf-tools-fixes-for-v5.12-2020-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (44 commits)
perf cs-etm: Fix bitmap for option
perf trace: Fix race in signal handling
perf map: Tighten snprintf() string precision to pass gcc check on some 32-bit arches
perf report: Fix -F for branch & mem modes
perf tests x86: Move insn.h include to make sure it finds stddef.h
perf test: Support the ins_lat check in the X86 specific test
perf test: Fix sample-parsing failure on non-x86 platforms
perf archive: Fix filtering of empty build-ids
perf daemon: Fix compile error with Asan
perf stat: Fix use-after-free when -r option is used
libperf: Add perf_evlist__reset_id_hash()
perf stat: Fix wrong skipping for per-die aggregation
tools headers UAPI: Sync KVM's kvm.h and vmx.h headers with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Update tools' copy of linux/coresight-pmu.h
tools headers: Update syscall.tbl files to support mount_setattr
perf test: Fix cpu and thread map leaks in perf_time_to_tsc test
perf test: Fix cpu map leaks in cpu_map_print test
perf test: Fix a memory leak in thread_map_remove test
perf test: Fix a thread map leak in thread_map_synthesize test
...
Pull parisc fixes from Helge Deller:
"Two small parisc architecture fixes: fix a linking failure reported by
the kernel test robot and remove a duplicate include"
* 'parisc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
arch/parisc/kernel: remove duplicate include in ptrace
parisc: Enable -mlong-calls gcc option with CONFIG_COMPILE_TEST
One non-fix, the conversion of vio_driver->remove() to return void, which
touches various powerpc specific drivers.
Fix the privilege checks we do in our perf handling, which could cause soft/hard
lockups in some configurations.
Fix a bug with IRQ affinity seen on kdump kernels when CPU 0 is offline in the
second kernel.
Fix missed page faults after mprotect(..., PROT_NONE) on 603 (32-bit).
Fix a bug in our VSX (vector) instruction emulation, which should only be seen
when doing VSX ops to cache inhibited mappings.
Three commits fixing various build issues with obscure configurations.
Thanks to:
Athira Rajeev, Cédric Le Goater, Christophe Leroy, Christoph Plattner, Greg
Kurz, Jordan Niethe, Laurent Vivier, Ravi Bangoria, Tyrel Datwyler, Uwe
Kleine-König.
-----BEGIN PGP SIGNATURE-----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=Jpjh
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One non-fix, the conversion of vio_driver->remove() to return void,
which touches various powerpc specific drivers.
Fix the privilege checks we do in our perf handling, which could cause
soft/hard lockups in some configurations.
Fix a bug with IRQ affinity seen on kdump kernels when CPU 0 is
offline in the second kernel.
Fix missed page faults after mprotect(..., PROT_NONE) on 603 (32-bit).
Fix a bug in our VSX (vector) instruction emulation, which should only
be seen when doing VSX ops to cache inhibited mappings.
Three commits fixing various build issues with obscure configurations.
Thanks to Athira Rajeev, Cédric Le Goater, Christophe Leroy, Christoph
Plattner, Greg Kurz, Jordan Niethe, Laurent Vivier, Ravi Bangoria,
Tyrel Datwyler, and Uwe Kleine-König"
* tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/sstep: Fix VSX instruction emulation
powerpc/perf: Fix handling of privilege level checks in perf interrupt context
powerpc: Force inlining of mmu_has_feature to fix build failure
vio: make remove callback return void
powerpc/syscall: Force inlining of __prep_irq_for_enabled_exit()
powerpc/603: Fix protection of user pages mapped with PROT_NONE
powerpc/pseries: Don't enforce MSI affinity with kdump
powerpc/4xx: Fix build errors from mfdcr()
- Fix virt_addr_valid() W=1 compiler warnings.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYEOCxhUcZ2VlcnRAbGlu
dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XDVhAEAhrUK59RHWHUvp6uxCWPrmte4bzlM
ckIlxKK6yPAf+voA/iOlxsY+7FFLbAUiiYkK86AyVBnVO2gW2ahjk6EBVLQD
=em5R
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v5.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k fix from Geert Uytterhoeven:
"Fix virt_addr_valid() W=1 compiler warnings.
This is a single non-critical fix. As the build bots are now testing
all new code with W=1, these warnings are popping up everywhere,
confusing people. Hence I think it makes sense to silence it as soon
as possible"
* tag 'm68k-for-v5.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Fix virt_addr_valid() W=1 compiler warnings
When set option with macros ETM_OPT_CTXTID and ETM_OPT_TS, it wrongly
takes these two values (14 and 28 prespectively) as bit masks, but
actually both are the offset for bits. But this doesn't lead to
further failure due to the AND logic operation will be always true for
ETM_OPT_CTXTID / ETM_OPT_TS.
This patch defines new independent macros (rather than using the
"config" bits) for requesting the "contextid" and "timestamp" for
cs_etm_set_option().
Signed-off-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Al Grant <al.grant@arm.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210206150833.42120-5-leo.yan@linaro.org
[ Extract the change as a separate patch for easier review ]
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since a lot of stuff happens before the SIGINT signal handler is registered
(scanning /proc/*, etc.), on bigger systems, such as Cavium Sabre CN99xx,
it may happen that first interrupt signal is lost and perf isn't correctly
terminated.
The reproduction code might look like the following:
perf trace -a &
PERF_PID=$!
sleep 4
kill -INT $PERF_PID
The issue has been found on a CN99xx machine with RHEL-8 and the patch fixes
it by registering the signal handlers earlier in the init stage.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/lkml/YEJnaMzH2ctp3PPx@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Noticed on a debian:experimental mips and mipsel cross build build
environment:
perfbuilder@ec265a086e9b:~$ mips-linux-gnu-gcc --version | head -1
mips-linux-gnu-gcc (Debian 10.2.1-3) 10.2.1 20201224
perfbuilder@ec265a086e9b:~$
CC /tmp/build/perf/util/map.o
util/map.c: In function 'map__new':
util/map.c:109:5: error: '%s' directive output may be truncated writing between 1 and 2147483645 bytes into a region of size 4096 [-Werror=format-truncation=]
109 | "%s/platforms/%s/arch-%s/usr/lib/%s",
| ^~
In file included from /usr/mips-linux-gnu/include/stdio.h:867,
from util/symbol.h:11,
from util/map.c:2:
/usr/mips-linux-gnu/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 32 or more bytes (assuming 4294967321) into a destination of size 4096
67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
68 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Since we have the lenghts for what lands in that place, use it to give
the compiler more info and make it happy.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report fails to add valid additional fields with -F when
used with branch or mem modes. Fix it.
Before patch:
$ perf record -b
$ perf report -b -F +srcline_from --stdio
Error:
Invalid --fields key: `srcline_from'
After patch:
$ perf report -b -F +srcline_from --stdio
# Samples: 8K of event 'cycles'
# Event count (approx.): 8784
...
Committer notes:
There was an inversion: when looking at branch stack dimensions (keys)
it was checking if the sort mode was 'mem', not 'branch'.
Fixes: aa6b3c9923 ("perf report: Make -F more strict like -s")
Reported-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20210304062958.85465-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some versions of alpine Linux the perf build is broken since commit
1d509f2a6e ("x86/insn: Support big endian cross-compiles"):
In file included from /usr/include/linux/byteorder/little_endian.h:13,
from /usr/include/asm/byteorder.h:5,
from arch/x86/util/../../../../arch/x86/include/asm/insn.h:10,
from arch/x86/util/archinsn.c:2:
/usr/include/linux/swab.h:161:8: error: unknown type name '__always_inline'
static __always_inline __u16 __swab16p(const __u16 *p)
So move the inclusion of arch/x86/include/asm/insn.h to later in the
places where linux/stddef.h (that conditionally defines
__always_inline) to workaround this problem on Alpine Linux 3.9 to 3.11,
3.12 onwards works.
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ins_lat of PERF_SAMPLE_WEIGHT_STRUCT stands for the instruction
latency, which is only available for X86. Add a X86 specific test for
the ins_lat and PERF_SAMPLE_WEIGHT_STRUCT type.
The test__x86_sample_parsing() uses the same way as the
test__sample_parsing() to verify a sample type. Since the ins_lat and
PERF_SAMPLE_WEIGHT_STRUCT are the only X86 specific sample type for now,
the test__x86_sample_parsing() only verify the PERF_SAMPLE_WEIGHT_STRUCT
type. Other sample types are still verified in the generic test.
$ perf test 77 -v
77: x86 Sample parsing :
--- start ---
test child forked, pid 102370
test child finished with 0
---- end ----
x86 Sample parsing: Ok
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1614787285-104151-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Executing 'perf test 27' fails on s390:
[root@t35lp46 perf]# ./perf test -Fv 27
27: Sample parsing
--- start ---
---- end ----
Sample parsing: FAILED!
[root@t35lp46 perf]#
The commit fbefe9c2f8 ("perf tools: Support arch specific
PERF_SAMPLE_WEIGHT_STRUCT processing") changes the ins_lat to a
model-specific variable only for X86, but perf test still verify the
variable in the generic test.
Remove the ins_lat check in the generic test. The following patch will
add it in the X86 specific test.
Fixes: fbefe9c2f8 ("perf tools: Support arch specific PERF_SAMPLE_WEIGHT_STRUCT processing")
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1614787285-104151-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A non-existent build-id used to be treated as all-zero SHA-1 hash.
Build-ids are now variable width. A non-existent build-id is an empty
string and "perf buildid-list" pads this with spaces. This is true even
when using old perf.data files recorded from older versions of perf;
"perf buildid-list" never reports an all-zero hash anymore.
This fixes "perf-archive" to skip missing build-ids by skipping lines
that start with a padding space rather than with zeroes.
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Huw Davies <huw@codeweavers.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: https://lore.kernel.org/r/442bffc7-ac5c-0975-b876-a549efce2413@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I'm seeing a build failure when build with address sanitizer. It seems
we could write to the name[100] if the var is longer.
$ make EXTRA_CFLAGS=-fsanitize=address
...
CC builtin-daemon.o
In function ‘get_session_name’,
inlined from ‘session_config’ at builtin-daemon.c:164:6,
inlined from ‘server_config’ at builtin-daemon.c:223:10:
builtin-daemon.c:155:11: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
155 | *session = 0;
| ~~~~~~~~~^~~
builtin-daemon.c: In function ‘server_config’:
builtin-daemon.c:162:7: note: at offset 100 to object ‘name’ with size 100 declared here
162 | char name[100];
| ^~~~
Fixes: c0666261ff ("perf daemon: Add config file support")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210224071438.686677-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I got a segfault when using -r option with event groups. The option
makes it run the workload multiple times and it will reuse the evlist
and evsel for each run.
While most of resources are allocated and freed properly, the id hash
in the evlist was not and it resulted in the bug. You can see it with
the address sanitizer like below:
$ perf stat -r 100 -e '{cycles,instructions}' true
=================================================================
==693052==ERROR: AddressSanitizer: heap-use-after-free on
address 0x6080000003d0 at pc 0x558c57732835 bp 0x7fff1526adb0 sp 0x7fff1526ada8
WRITE of size 8 at 0x6080000003d0 thread T0
#0 0x558c57732834 in hlist_add_head /home/namhyung/project/linux/tools/include/linux/list.h:644
#1 0x558c57732834 in perf_evlist__id_hash /home/namhyung/project/linux/tools/lib/perf/evlist.c:237
#2 0x558c57732834 in perf_evlist__id_add /home/namhyung/project/linux/tools/lib/perf/evlist.c:244
#3 0x558c57732834 in perf_evlist__id_add_fd /home/namhyung/project/linux/tools/lib/perf/evlist.c:285
#4 0x558c5747733e in store_evsel_ids util/evsel.c:2765
#5 0x558c5747733e in evsel__store_ids util/evsel.c:2782
#6 0x558c5730b717 in __run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:895
#7 0x558c5730b717 in run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:1014
#8 0x558c5730b717 in cmd_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:2446
#9 0x558c57427c24 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#10 0x558c572b1a48 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#11 0x558c572b1a48 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#12 0x558c572b1a48 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#13 0x7fcadb9f7d09 in __libc_start_main ../csu/libc-start.c:308
#14 0x558c572b60f9 in _start (/home/namhyung/project/linux/tools/perf/perf+0x45d0f9)
Actually the nodes in the hash table are struct perf_stream_id and
they were freed in the previous run. Fix it by resetting the hash.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210225035148.778569-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the perf_evlist__reset_id_hash() function as an internal function so
that it can be called by perf to reset the hash table. This is
necessary for 'perf stat' to run the workload multiple times.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210225035148.778569-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
fe6b6bc802 ("KVM: VMX: Enable bus lock VM exit")
That makes 'perf kvm-stat' aware of this new BUS_LOCK exit reason, thus
addressing the following perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Cc: Chenyi Qiang <chenyi.qiang@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
3b9c723ed7 ("KVM: SVM: Add support for SVM instruction address check change")
b85a0425d8 ("Enumerate AVX Vector Neural Network instructions")
fb35d30fe5 ("x86/cpufeatures: Assign dedicated feature word for CPUID_0x8000001F[EAX]")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Borislav Petkov <bp@suse.de>
Cc: Kyung Min Park <kyung.min.park@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in these commits:
88f11864cf ("coresight: etm-perf: Support PID tracing for kernel at EL2")
53abf3fe83 ("coresight: etm-perf: Clarify comment on perf options")
This will possibly be used in patches lined up for v5.13.
And silence this perf build warning:
Warning: Kernel ABI header at 'tools/include/linux/coresight-pmu.h' differs from latest version at 'include/linux/coresight-pmu.h'
diff -u tools/include/linux/coresight-pmu.h include/linux/coresight-pmu.h
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
9caccd4154 ("fs: introduce MOUNT_ATTR_IDMAP")
This adds this new syscall to the tables used by tools such as 'perf
trace', so that one can specify it by name and have it filtered, etc.
Addressing these perf build warnings:
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YD6Wsxr9ByUbab/a@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It should release the maps at the end.
$ perf test -v 71
71: Convert perf time to TSC :
--- start ---
test child forked, pid 178744
mmap size 528384B
1st event perf time 59207256505278 tsc 13187166645142
rdtsc time 59207256542151 tsc 13187166723020
2nd event perf time 59207256543749 tsc 13187166726393
=================================================================
==178744==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7faf601f9e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55b620cfc00a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x55b620cfca2f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
#3 0x55b620cfd1ef in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
#4 0x55b620cfd1ef in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
#5 0x55b6209ef1b2 in test__perf_time_to_tsc tests/perf-time-to-tsc.c:73
#6 0x55b6209828fb in run_test tests/builtin-test.c:428
#7 0x55b6209828fb in test_and_print tests/builtin-test.c:458
#8 0x55b620984a53 in __cmd_test tests/builtin-test.c:679
#9 0x55b620984a53 in cmd_test tests/builtin-test.c:825
#10 0x55b6209f0cd4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#11 0x55b62087aa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#12 0x55b62087aa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#13 0x55b62087aa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#14 0x7faf5fd2fd09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Convert perf time to TSC: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It should be released after printing the map.
$ perf test -v 52
52: Print cpu map :
--- start ---
test child forked, pid 172233
=================================================================
==172233==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 156 byte(s) in 1 object(s) allocated from:
#0 0x7fc472518e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55e63b378f7a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x55e63b37a05c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237
#3 0x55e63b056d16 in cpu_map_print tests/cpumap.c:102
#4 0x55e63b056d16 in test__cpu_map_print tests/cpumap.c:120
#5 0x55e63afff8fb in run_test tests/builtin-test.c:428
#6 0x55e63afff8fb in test_and_print tests/builtin-test.c:458
#7 0x55e63b001a53 in __cmd_test tests/builtin-test.c:679
#8 0x55e63b001a53 in cmd_test tests/builtin-test.c:825
#9 0x55e63b06dc44 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#10 0x55e63aef7a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#11 0x55e63aef7a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#12 0x55e63aef7a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#13 0x7fc47204ed09 in __libc_start_main ../csu/libc-start.c:308
...
SUMMARY: AddressSanitizer: 448 byte(s) leaked in 7 allocation(s).
test child finished with 1
---- end ----
Print cpu map: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The str should be freed after creating a thread map. Also change the
open-coded thread map deletion to a call to perf_thread_map__put().
$ perf test -v 44
44: Remove thread map :
--- start ---
test child forked, pid 165536
2 threads: 165535, 165536
1 thread: 165536
0 thread:
=================================================================
==165536==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 14 byte(s) in 1 object(s) allocated from:
#0 0x7f54453ffe8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x7f5444f8c6a7 in __vasprintf_internal libio/vasprintf.c:71
SUMMARY: AddressSanitizer: 14 byte(s) leaked in 1 allocation(s).
test child finished with 1
---- end ----
Remove thread map: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It missed to call perf_thread_map__put() after using the map.
$ perf test -v 43
43: Synthesize thread map :
--- start ---
test child forked, pid 162640
=================================================================
==162640==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fd48cdaa1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
#1 0x563e6d5f8d0e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
#2 0x563e6d3ef69a in thread_map__new_by_pid util/thread_map.c:46
#3 0x563e6d2cec90 in test__thread_map_synthesize tests/thread-map.c:97
#4 0x563e6d27d8fb in run_test tests/builtin-test.c:428
#5 0x563e6d27d8fb in test_and_print tests/builtin-test.c:458
#6 0x563e6d27fa53 in __cmd_test tests/builtin-test.c:679
#7 0x563e6d27fa53 in cmd_test tests/builtin-test.c:825
#8 0x563e6d2ebce4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#9 0x563e6d175a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#10 0x563e6d175a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#11 0x563e6d175a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#12 0x7fd48c8dfd09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 8224 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Synthesize thread map: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evlist and cpu/thread maps should be released together.
Otherwise the following error was reported by Asan.
$ perf test -v 35
35: Track with sched_switch :
--- start ---
test child forked, pid 159287
Using CPUID GenuineIntel-6-8E-C
mmap size 528384B
1295 events recorded
=================================================================
==159287==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7fa28d9a2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x5652f5a5affa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x5652f5a5ba1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
#3 0x5652f5a5c1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
#4 0x5652f5a5c1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
#5 0x5652f5723bbf in test__switch_tracking tests/switch-tracking.c:350
#6 0x5652f56e18fb in run_test tests/builtin-test.c:428
#7 0x5652f56e18fb in test_and_print tests/builtin-test.c:458
#8 0x5652f56e3a53 in __cmd_test tests/builtin-test.c:679
#9 0x5652f56e3a53 in cmd_test tests/builtin-test.c:825
#10 0x5652f574fcc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#11 0x5652f55d9a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#12 0x5652f55d9a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#13 0x5652f55d9a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#14 0x7fa28d4d8d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Track with sched_switch: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evlist and the cpu/thread maps should be released together.
Otherwise following error was reported by Asan.
$ perf test -v 28
28: Use a dummy software event to keep tracking:
--- start ---
test child forked, pid 156810
mmap size 528384B
=================================================================
==156810==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f637d2bce8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55cc6295cffa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x55cc6295da1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
#3 0x55cc6295e1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
#4 0x55cc6295e1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
#5 0x55cc626287cf in test__keep_tracking tests/keep-tracking.c:84
#6 0x55cc625e38fb in run_test tests/builtin-test.c:428
#7 0x55cc625e38fb in test_and_print tests/builtin-test.c:458
#8 0x55cc625e5a53 in __cmd_test tests/builtin-test.c:679
#9 0x55cc625e5a53 in cmd_test tests/builtin-test.c:825
#10 0x55cc62651cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#11 0x55cc624dba88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#12 0x55cc624dba88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#13 0x55cc624dba88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#14 0x7f637cdf2d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Use a dummy software event to keep tracking: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evlist and the cpu/thread maps should be released together.
Otherwise following error was reported by Asan.
Note that this test still has memory leaks in DSOs so it still fails
even after this change. I'll take a look at that too.
# perf test -v 26
26: Object code reading :
--- start ---
test child forked, pid 154184
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
symsrc__init: cannot get elf header.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
Parsing event 'cycles'
mmap size 528384B
...
=================================================================
==154184==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 439 byte(s) in 1 object(s) allocated from:
#0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x55ad9b7e821e in dso__new_id util/dso.c:1256
#2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132
#3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347
#4 0x55ad9b845b7e in map__new util/map.c:176
#5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787
#6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64
#7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499
#8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741
#9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833
#10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608
#11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722
#12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428
#13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458
#14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679
#15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825
#16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308
...
SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Object code reading: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evlist has the maps with its own refcounts so we don't need to set
the pointers to NULL. Otherwise following error was reported by Asan.
Also change the goto label since it doesn't need to have two.
# perf test -v 25
25: Software clock events period values :
--- start ---
test child forked, pid 149154
mmap size 528384B
mmap size 528384B
=================================================================
==149154==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fef5cd071f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
#1 0x56260d5e8b8e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
#2 0x56260d3df7a9 in thread_map__new_by_tid util/thread_map.c:63
#3 0x56260d2ac6b2 in __test__sw_clock_freq tests/sw-clock.c:65
#4 0x56260d26d8fb in run_test tests/builtin-test.c:428
#5 0x56260d26d8fb in test_and_print tests/builtin-test.c:458
#6 0x56260d26fa53 in __cmd_test tests/builtin-test.c:679
#7 0x56260d26fa53 in cmd_test tests/builtin-test.c:825
#8 0x56260d2dbb64 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#9 0x56260d165a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#10 0x56260d165a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#11 0x56260d165a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#12 0x7fef5c83cd09 in __libc_start_main ../csu/libc-start.c:308
...
test child finished with 1
---- end ----
Software clock events period values : FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evlist has the maps with its own refcounts so we don't need to set
the pointers to NULL. Otherwise following error was reported by Asan.
Also change the goto label since it doesn't need to have two.
# perf test -v 24
24: Number of exit events of a simple workload :
--- start ---
test child forked, pid 145915
mmap size 528384B
=================================================================
==145915==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fc44e50d1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
#1 0x561cf50f4d2e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
#2 0x561cf4eeb949 in thread_map__new_by_tid util/thread_map.c:63
#3 0x561cf4db7fd2 in test__task_exit tests/task-exit.c:74
#4 0x561cf4d798fb in run_test tests/builtin-test.c:428
#5 0x561cf4d798fb in test_and_print tests/builtin-test.c:458
#6 0x561cf4d7ba53 in __cmd_test tests/builtin-test.c:679
#7 0x561cf4d7ba53 in cmd_test tests/builtin-test.c:825
#8 0x561cf4de7d04 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#9 0x561cf4c71a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#10 0x561cf4c71a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#11 0x561cf4c71a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#12 0x7fc44e042d09 in __libc_start_main ../csu/libc-start.c:308
...
test child finished with 1
---- end ----
Number of exit events of a simple workload: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The get_argv_exec_path() returns a dynamic memory so it should be
freed after use.
$ perf test -v 17
...
==141682==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 33 byte(s) in 1 object(s) allocated from:
#0 0x7f09107d2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x7f091035f6a7 in __vasprintf_internal libio/vasprintf.c:71
SUMMARY: AddressSanitizer: 33 byte(s) leaked in 1 allocation(s).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evlist has the maps with its own refcounts so we don't need to set
the pointers to NULL. Otherwise following error was reported by Asan.
# perf test -v 4
4: Read samples using the mmap interface :
--- start ---
test child forked, pid 139782
mmap size 528384B
=================================================================
==139782==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f1f76daee8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x564ba21a0fea in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x564ba21a1a0f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
#3 0x564ba21a21cf in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
#4 0x564ba21a21cf in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
#5 0x564ba1e48298 in test__basic_mmap tests/mmap-basic.c:55
#6 0x564ba1e278fb in run_test tests/builtin-test.c:428
#7 0x564ba1e278fb in test_and_print tests/builtin-test.c:458
#8 0x564ba1e29a53 in __cmd_test tests/builtin-test.c:679
#9 0x564ba1e29a53 in cmd_test tests/builtin-test.c:825
#10 0x564ba1e95cb4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#11 0x564ba1d1fa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#12 0x564ba1d1fa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#13 0x564ba1d1fa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#14 0x7f1f768e4d09 in __libc_start_main ../csu/libc-start.c:308
...
test child finished with 1
---- end ----
Read samples using the mmap interface: FAILED!
failed to open shell test directory: /home/namhyung/libexec/perf-core/tests/shell
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20210301140409.184570-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao reported parser error for software event:
# perf stat -e software/r1a/ -a -- sleep 1
event syntax error: 'software/r1a/'
\___ parser error
This happens after commit 8c3b1ba0e7 ("drm/i915/gt: Track the
overall awake/busy time"), where new software-gt-awake-time event's
non-pmu-event-style makes event parser conflict with software PMU.
If we allow PE_PMU_EVENT_PRE to be parsed as PMU name, we fix the
conflict and the following character '/' for PMU or '-' for
non-pmu-event-style event allows parser to decide what even is
specified.
Fixes: 8c3b1ba0e7 ("drm/i915/gt: Track the overall awake/busy time")
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210301122315.63471-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
