Unlock before returning -EOPNOTSUPP.
Fixes: 3c06e91b40 ("wifi: mac80211: Support POWERED_ADDR_CHANGE feature")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At some point a few kernel debug prints started appearing which
indicated something was sending invalid IEs:
"bad VHT capabilities, disabling VHT"
"Invalid HE elem, Disable HE"
Turns out these were being printed because the local hardware
supported HE/VHT but the peer/AP did not. Bad/invalid indicates,
to me at least, that the IE is in some way malformed, not missing.
For the HE print (ieee80211_verify_peer_he_mcs_support) it will
now silently fail if the HE capability element is missing (still
prints if the element size is wrong).
For the VHT print, it has been removed completely and will silently
set the DISABLE_VHT flag which is consistent with how DISABLE_HT
is set.
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When building the probe request IEs HE support is checked for
the 6GHz band (wiphy->bands[NL80211_BAND_6GHZ]). If supported
the HE capability IE should be included according to the spec.
The problem is the 16-bit capability is obtained from the
band object (sband) that was passed in, not the 6GHz band
object (sband6). If the sband object doesn't support HE it will
result in a warning.
Fixes: 7d29bc50b3 ("mac80211: always include HE 6GHz capability in probe request")
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since STP TCN frames are only 7 bytes, the pskb_may_pull call returns an error.
Instead of dropping those packets, bump them back to the slow path for proper
processing.
Fixes: 49ddf8e6e2 ("mac80211: add fast-rx path")
Reported-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This parse_opts will set invalid opts.rfd/wfd in case of failure which
we already check, but it is not clear for readers that parse_opts error
are handled in p9_fd_create: clarify this by explicitely checking the
return value.
Link: https://lkml.kernel.org/r/20220921210921.1654735-1-floridsleeves@gmail.com
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
[Dominique: reworded commit message to clarify this is NOOP]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Shamelessly copying the explanation from Tetsuo Handa's suggested
patch[1] (slightly reworded):
syzbot is reporting inconsistent lock state in p9_req_put()[2],
for p9_tag_remove() from p9_req_put() from IRQ context is using
spin_lock_irqsave() on "struct p9_client"->lock but trans_fd
(not from IRQ context) is using spin_lock().
Since the locks actually protect different things in client.c and in
trans_fd.c, just replace trans_fd.c's lock by a new one specific to the
transport (client.c's protect the idr for fid/tag allocations,
while trans_fd.c's protects its own req list and request status field
that acts as the transport's state machine)
Link: https://lore.kernel.org/r/20220904112928.1308799-1-asmadeus@codewreck.org
Link: https://lkml.kernel.org/r/2470e028-9b05-2013-7198-1fdad071d999@I-love.SAKURA.ne.jp [1]
Link: https://syzkaller.appspot.com/bug?extid=2f20b523930c32c160cc [2]
Reported-by: syzbot <syzbot+2f20b523930c32c160cc@syzkaller.appspotmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Gwangun Jung reported a slab-out-of-bounds access in fib_nh_match:
fib_nh_match+0xf98/0x1130 linux-6.0-rc7/net/ipv4/fib_semantics.c:961
fib_table_delete+0x5f3/0xa40 linux-6.0-rc7/net/ipv4/fib_trie.c:1753
inet_rtm_delroute+0x2b3/0x380 linux-6.0-rc7/net/ipv4/fib_frontend.c:874
Separate nexthop objects are mutually exclusive with the legacy
multipath spec. Fix fib_nh_match to return if the config for the
to be deleted route contains a multipath spec while the fib_info
is using a nexthop object.
Fixes: 493ced1ac4 ("ipv4: Allow routes to use nexthop objects")
Fixes: 6bf92d70e6 ("net: ipv4: fix route with nexthop object delete warning")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return error code -EINVAL from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 94160108a7 ("net/ieee802154: fix uninit value bug in dgram_sendmsg")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220919160830.1436109-1-weiyongjun@huaweicloud.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
syzbot is reporting hung task at p9_fd_close() [1], for p9_mux_poll_stop()
from p9_conn_destroy() from p9_fd_close() is failing to interrupt already
started kernel_read() from p9_fd_read() from p9_read_work() and/or
kernel_write() from p9_fd_write() from p9_write_work() requests.
Since p9_socket_open() sets O_NONBLOCK flag, p9_mux_poll_stop() does not
need to interrupt kernel_read()/kernel_write(). However, since p9_fd_open()
does not set O_NONBLOCK flag, but pipe blocks unless signal is pending,
p9_mux_poll_stop() needs to interrupt kernel_read()/kernel_write() when
the file descriptor refers to a pipe. In other words, pipe file descriptor
needs to be handled as if socket file descriptor.
We somehow need to interrupt kernel_read()/kernel_write() on pipes.
A minimal change, which this patch is doing, is to set O_NONBLOCK flag
from p9_fd_open(), for O_NONBLOCK flag does not affect reading/writing
of regular files. But this approach changes O_NONBLOCK flag on userspace-
supplied file descriptors (which might break userspace programs), and
O_NONBLOCK flag could be changed by userspace. It would be possible to set
O_NONBLOCK flag every time p9_fd_read()/p9_fd_write() is invoked, but still
remains small race window for clearing O_NONBLOCK flag.
If we don't want to manipulate O_NONBLOCK flag, we might be able to
surround kernel_read()/kernel_write() with set_thread_flag(TIF_SIGPENDING)
and recalc_sigpending(). Since p9_read_work()/p9_write_work() works are
processed by kernel threads which process global system_wq workqueue,
signals could not be delivered from remote threads when p9_mux_poll_stop()
from p9_conn_destroy() from p9_fd_close() is called. Therefore, calling
set_thread_flag(TIF_SIGPENDING)/recalc_sigpending() every time would be
needed if we count on signals for making kernel_read()/kernel_write()
non-blocking.
Link: https://lkml.kernel.org/r/345de429-a88b-7097-d177-adecf9fed342@I-love.SAKURA.ne.jp
Link: https://syzkaller.appspot.com/bug?extid=8b41a1365f1106fd0f33 [1]
Reported-by: syzbot <syzbot+8b41a1365f1106fd0f33@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+8b41a1365f1106fd0f33@syzkaller.appspotmail.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: add comment at Christian's suggestion]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYzxjQAAKCRBZ7Krx/gZQ
683pAP9oSHaXo3Twl6rweirNbHocgm8MynCgIU3bpzeVPi6Z1wEApfEq4IInWQyL
R6ObOneoSobi+9Iaqsoe+uKu54MghAY=
=rt7w
-----END PGP SIGNATURE-----
Merge tag 'pull-d_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs d_path updates from Al Viro.
* tag 'pull-d_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
d_path.c: typo fix...
dynamic_dname(): drop unused dentry argument
Allow the caller to force a disconnection of the RPC client so that we
can clear any pending requests that are buffered in the socket.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add the helper rpc_cancel_tasks(), which uses a caller-defined selection
function to define a set of in-flight RPC calls to cancel. This is
mainly intended for pNFS drivers which are subject to a layout recall,
and which may therefore want to cancel all pending I/O using that layout
in order to redrive it after the layout recall has been satisfied.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that we immediately call rpc_exit_task() after waking up, and
that the tk_rpc_status cannot get clobbered by some other function.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2022-10-05
Only two patches this time around. A revert from Alexander Aring to a patch
that hit net and the updated patch to fix the problem from Tetsuo Handa.
* tag 'ieee802154-for-net-2022-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
net/ieee802154: don't warn zero-sized raw_sendmsg()
Revert "net/ieee802154: reject zero-sized raw_sendmsg()"
====================
Link: https://lore.kernel.org/r/20221005144508.787376-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
taprio_attach() has this logic at the end, which should have been
removed with the blamed patch (which is now being reverted):
/* access to the child qdiscs is not needed in offload mode */
if (FULL_OFFLOAD_IS_ENABLED(q->flags)) {
kfree(q->qdiscs);
q->qdiscs = NULL;
}
because otherwise, we make use of q->qdiscs[] even after this array was
deallocated, namely in taprio_leaf(). Therefore, whenever one would try
to attach a valid child qdisc to a fully offloaded taprio root, one
would immediately dereference a NULL pointer.
$ tc qdisc replace dev eno0 handle 8001: parent root taprio \
num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
max-sdu 0 0 0 0 0 200 0 0 \
base-time 200 \
sched-entry S 80 20000 \
sched-entry S a0 20000 \
sched-entry S 5f 60000 \
flags 2
$ max_frame_size=1500
$ data_rate_kbps=20000
$ port_transmit_rate_kbps=1000000
$ idleslope=$data_rate_kbps
$ sendslope=$(($idleslope - $port_transmit_rate_kbps))
$ locredit=$(($max_frame_size * $sendslope / $port_transmit_rate_kbps))
$ hicredit=$(($max_frame_size * $idleslope / $port_transmit_rate_kbps))
$ tc qdisc replace dev eno0 parent 8001:7 cbs \
idleslope $idleslope \
sendslope $sendslope \
hicredit $hicredit \
locredit $locredit \
offload 0
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
pc : taprio_leaf+0x28/0x40
lr : qdisc_leaf+0x3c/0x60
Call trace:
taprio_leaf+0x28/0x40
tc_modify_qdisc+0xf0/0x72c
rtnetlink_rcv_msg+0x12c/0x390
netlink_rcv_skb+0x5c/0x130
rtnetlink_rcv+0x1c/0x2c
The solution is not as obvious as the problem. The code which deallocates
q->qdiscs[] is in fact copied and pasted from mqprio, which also
deallocates the array in mqprio_attach() and never uses it afterwards.
Therefore, the identical cleanup logic of priv->qdiscs[] that
mqprio_destroy() has is deceptive because it will never take place at
qdisc_destroy() time, but just at raw ops->destroy() time (otherwise
said, priv->qdiscs[] do not last for the entire lifetime of the mqprio
root), but rather, this is just the twisted way in which the Qdisc API
understands error path cleanup should be done (Qdisc_ops :: destroy() is
called even when Qdisc_ops :: init() never succeeded).
Side note, in fact this is also what the comment in mqprio_init() says:
/* pre-allocate qdisc, attachment can't fail */
Or reworded, mqprio's priv->qdiscs[] scheme is only meant to serve as
data passing between Qdisc_ops :: init() and Qdisc_ops :: attach().
[ this comment was also copied and pasted into the initial taprio
commit, even though taprio_attach() came way later ]
The problem is that taprio also makes extensive use of the q->qdiscs[]
array in the software fast path (taprio_enqueue() and taprio_dequeue()),
but it does not keep a reference of its own on q->qdiscs[i] (you'd think
that since it creates these Qdiscs, it holds the reference, but nope,
this is not completely true).
To understand the difference between taprio_destroy() and mqprio_destroy()
one must look before commit 13511704f8 ("net: taprio offload: enforce
qdisc to netdev queue mapping"), because that just muddied the waters.
In the "original" taprio design, taprio always attached itself (the root
Qdisc) to all netdev TX queues, so that dev_qdisc_enqueue() would go
through taprio_enqueue().
It also called qdisc_refcount_inc() on itself for as many times as there
were netdev TX queues, in order to counter-balance what tc_get_qdisc()
does when destroying a Qdisc (simplified for brevity below):
if (n->nlmsg_type == RTM_DELQDISC)
err = qdisc_graft(dev, parent=NULL, new=NULL, q, extack);
qdisc_graft(where "new" is NULL so this deletes the Qdisc):
for (i = 0; i < num_q; i++) {
struct netdev_queue *dev_queue;
dev_queue = netdev_get_tx_queue(dev, i);
old = dev_graft_qdisc(dev_queue, new);
if (new && i > 0)
qdisc_refcount_inc(new);
qdisc_put(old);
~~~~~~~~~~~~~~
this decrements taprio's refcount once for each TX queue
}
notify_and_destroy(net, skb, n, classid,
rtnl_dereference(dev->qdisc), new);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and this finally decrements it to zero,
making qdisc_put() call qdisc_destroy()
The q->qdiscs[] created using qdisc_create_dflt() (or their
replacements, if taprio_graft() was ever to get called) were then
privately freed by taprio_destroy().
This is still what is happening after commit 13511704f8 ("net: taprio
offload: enforce qdisc to netdev queue mapping"), but only for software
mode.
In full offload mode, the per-txq "qdisc_put(old)" calls from
qdisc_graft() now deallocate the child Qdiscs rather than decrement
taprio's refcount. So when notify_and_destroy(taprio) finally calls
taprio_destroy(), the difference is that the child Qdiscs were already
deallocated.
And this is exactly why the taprio_attach() comment "access to the child
qdiscs is not needed in offload mode" is deceptive too. Not only the
q->qdiscs[] array is not needed, but it is also necessary to get rid of
it as soon as possible, because otherwise, we will also call qdisc_put()
on the child Qdiscs in qdisc_destroy() -> taprio_destroy(), and this
will cause a nasty use-after-free/refcount-saturate/whatever.
In short, the problem is that since the blamed commit, taprio_leaf()
needs q->qdiscs[] to not be freed by taprio_attach(), while qdisc_destroy()
-> taprio_destroy() does need q->qdiscs[] to be freed by taprio_attach()
for full offload. Fixing one problem triggers the other.
All of this can be solved by making taprio keep its q->qdiscs[i] with a
refcount elevated at 2 (in offloaded mode where they are attached to the
netdev TX queues), both in taprio_attach() and in taprio_graft(). The
generic qdisc_graft() would just decrement the child qdiscs' refcounts
to 1, and taprio_destroy() would give them the final coup de grace.
However the rabbit hole of changes is getting quite deep, and the
complexity increases. The blamed commit was supposed to be a bug fix in
the first place, and the bug it addressed is not so significant so as to
justify further rework in stable trees. So I'd rather just revert it.
I don't know enough about multi-queue Qdisc design to make a proper
judgement right now regarding what is/isn't idiomatic use of Qdisc
concepts in taprio. I will try to study the problem more and come with a
different solution in net-next.
Fixes: 1461d212ab ("net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs")
Reported-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20221004220100.1650558-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/sunrpc/xprtrdma/frwr_ops.c:151:32: warning: variable 'rc' is uninitialized when used here [-Wuninitialized]
trace_xprtrdma_frwr_alloc(mr, rc);
^~
net/sunrpc/xprtrdma/frwr_ops.c:127:8: note: initialize the variable 'rc' to silence this warning
int rc;
^
= 0
1 warning generated.
The tracepoint is intended to record the error returned from
ib_alloc_mr(). In the current code there is no other purpose for
@rc, so simply replace it.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: d8cf39a280c3b0 ('xprtrdma: MR-related memory allocation should be allowed to fail')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Many memory allocations that xprtrdma does can fail safely. Let's
use this fact to avoid some potential deadlocks: Replace GFP_KERNEL
with GFP flags that do not try hard to acquire memory.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
An attempt to establish a connection can always fail and then be
retried. GFP_KERNEL allocation is not necessary here.
Like MR allocation, establishing a connection is always done in a
worker thread. The new GFP flags align with the flags that would
be returned by rpc_task_gfp_mask() in this case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
xprtrdma always drives a retry of MR allocation if it should fail.
It should be safe to not use GFP_KERNEL for this purpose rather
than sleeping in the memory allocator.
In theory, if these weaker allocations are attempted first, memory
exhaustion is likely to cause xprtrdma to fail fast and not then
invoke the RDMA core APIs, which still might use GFP_KERNEL.
Also note that rpc_task_gfp_mask() always sets __GFP_NORETRY and
__GFP_NOWARN when an RPC-related allocation is being done in a
worker thread. MR allocation is already always done in worker
threads.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently all rpcrdma_regbuf_alloc() call sites pass the same value
as their third argument. That argument can therefore be eliminated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 1769e6a816 ("xprtrdma: Clean up rpcrdma_create_req()")
added rpcrdma_req_create() with a GFP flags argument in case a
caller might want to avoid waiting for memory.
There has never been a caller that does not pass GFP_KERNEL as
the third argument. That argument can therefore be eliminated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
xprt_rdma_bc_allocate() is now the only user of RPCRDMA_DEF_GFP.
Replace that macro with the raw flags.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
While setting up a new lab, I accidentally misconfigured the
Ethernet port for a system that tried an NFS mount using RoCE.
This made the NFS server unreachable. The following WARNING
popped on the NFS client while waiting for the mount attempt to
time out:
kernel: workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma] is flushing !WQ_MEM_RECLAI>
kernel: WARNING: CPU: 0 PID: 100 at kernel/workqueue.c:2628 check_flush_dependency+0xbf/0xca
kernel: Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs 8021q garp stp mrp llc rfkill rpcrdma>
kernel: CPU: 0 PID: 100 Comm: kworker/u8:8 Not tainted 6.0.0-rc1-00002-g6229f8c054e5 #13
kernel: Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0b 06/12/2017
kernel: Workqueue: xprtiod xprt_rdma_connect_worker [rpcrdma]
kernel: RIP: 0010:check_flush_dependency+0xbf/0xca
kernel: Code: 75 2a 48 8b 55 18 48 8d 8b b0 00 00 00 4d 89 e0 48 81 c6 b0 00 00 00 48 c7 c7 65 33 2e be>
kernel: RSP: 0018:ffffb562806cfcf8 EFLAGS: 00010092
kernel: RAX: 0000000000000082 RBX: ffff97894f8c3c00 RCX: 0000000000000027
kernel: RDX: 0000000000000002 RSI: ffffffffbe3447d1 RDI: 00000000ffffffff
kernel: RBP: ffff978941315840 R08: 0000000000000000 R09: 0000000000000000
kernel: R10: 00000000000008b0 R11: 0000000000000001 R12: ffffffffc0ce3731
kernel: R13: ffff978950c00500 R14: ffff97894341f0c0 R15: ffff978951112eb0
kernel: FS: 0000000000000000(0000) GS:ffff97987fc00000(0000) knlGS:0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 00007f807535eae8 CR3: 000000010b8e4002 CR4: 00000000003706f0
kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
kernel: Call Trace:
kernel: <TASK>
kernel: __flush_work.isra.0+0xaf/0x188
kernel: ? _raw_spin_lock_irqsave+0x2c/0x37
kernel: ? lock_timer_base+0x38/0x5f
kernel: __cancel_work_timer+0xea/0x13d
kernel: ? preempt_latency_start+0x2b/0x46
kernel: rdma_addr_cancel+0x70/0x81 [ib_core]
kernel: _destroy_id+0x1a/0x246 [rdma_cm]
kernel: rpcrdma_xprt_connect+0x115/0x5ae [rpcrdma]
kernel: ? _raw_spin_unlock+0x14/0x29
kernel: ? raw_spin_rq_unlock_irq+0x5/0x10
kernel: ? finish_task_switch.isra.0+0x171/0x249
kernel: xprt_rdma_connect_worker+0x3b/0xc7 [rpcrdma]
kernel: process_one_work+0x1d8/0x2d4
kernel: worker_thread+0x18b/0x24f
kernel: ? rescuer_thread+0x280/0x280
kernel: kthread+0xf4/0xfc
kernel: ? kthread_complete_and_exit+0x1b/0x1b
kernel: ret_from_fork+0x22/0x30
kernel: </TASK>
SUNRPC's xprtiod workqueue is WQ_MEM_RECLAIM, so any workqueue that
one of its work items tries to cancel has to be WQ_MEM_RECLAIM to
prevent a priority inversion. The internal workqueues in the
RDMA/core are currently non-MEM_RECLAIM.
Jason Gunthorpe says this about the current state of RDMA/core:
> If you attempt to do a reconnection/etc from within a RECLAIM
> context it will deadlock on one of the many allocations that are
> made to support opening the connection.
>
> The general idea of reclaim is that the entire task context
> working under the reclaim is marked with an override of the gfp
> flags to make all allocations under that call chain reclaim safe.
>
> But rdmacm does allocations outside this, eg in the WQs processing
> the CM packets. So this doesn't work and we will deadlock.
>
> Fixing it is a big deal and needs more than poking WQ_MEM_RECLAIM
> here and there.
So we will change the ULP in this case to avoid the use of
WQ_MEM_RECLAIM where possible. Deadlocks that were possible before
are not fixed, but at least we no longer have a false sense of
confidence that the stack won't allocate memory during memory
reclaim.
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
So far 'msize' was simply used for all 9p message types, which is far
too much and slowed down performance tremendously with large values
for user configurable 'msize' option.
Let's stop this waste by using the new p9_msg_buf_size() function for
allocating more appropriate, smaller buffers according to what is
actually sent over the wire.
Only exception: RDMA transport is currently excluded from this message
size optimization - for its response buffers that is - as RDMA transport
would not cope with it, due to its response buffers being pulled from a
shared pool. [1]
Link: https://lore.kernel.org/all/Ys3jjg52EIyITPua@codewreck.org/ [1]
Link: https://lkml.kernel.org/r/3f51590535dc96ed0a165b8218c57639cfa5c36c.1657920926.git.linux_oss@crudebyte.com
Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
This new function calculates a buffer size suitable for holding the
intended 9p request or response. For rather small message types (which
applies to almost all 9p message types actually) simply use hard coded
values. For some variable-length and potentially large message types
calculate a more precise value according to what data is actually
transmitted to avoid unnecessarily huge buffers.
So p9_msg_buf_size() divides the individual 9p message types into 3
message size categories:
- dynamically calculated message size (i.e. potentially large)
- 8k hard coded message size
- 4k hard coded message size
As for the latter two hard coded message types: for most 9p message
types it is pretty obvious whether they would always fit into 4k or
8k. But for some of them it depends on the maximum directory entry
name length allowed by OS and filesystem for determining into which
of the two size categories they would fit into. Currently Linux
supports directory entry names up to NAME_MAX (255), however when
comparing the limitation of individual filesystems, ReiserFS
theoretically supports up to slightly below 4k long names. So in
order to make this code more future proof, and as revisiting it
later on is a bit tedious and has the potential to miss out details,
the decision [1] was made to take 4k as basis as for max. name length.
Link: https://lkml.kernel.org/r/bd6be891cf67e867688e8c8796d06408bfafa0d9.1657920926.git.linux_oss@crudebyte.com
Link: https://lore.kernel.org/all/5564296.oo812IJUPE@silver/ [1]
Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Refactor 'max_size' argument of p9_tag_alloc() and 'req_size' argument
of p9_client_prepare_req() both into a pair of arguments 't_size' and
'r_size' respectively to allow handling the buffer size for request and
reply separately from each other.
Link: https://lkml.kernel.org/r/9431a25fe4b37fd12cecbd715c13af71f701f220.1657920926.git.linux_oss@crudebyte.com
Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Core
----
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO.
This significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF
---
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions.
Expose crash_kexec() to allow BPF to trigger a kernel dump.
Use CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs.
Only structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols
---------
- WiFi: more Extremely High Throughput (EHT) and Multi-Link
Operation (MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state
and RST packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API
----------
- Allow selecting the conduit interface used by each port
in DSA switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting
per traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one
of the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much
as possible. It's one of those magic knobs which seemed like
a good idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers
----------------------
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers
-------
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay
window offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Gsio
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
ceph_msg_data_next is always passed a NULL pointer for this field. Some
of the "next" operations look at it in order to determine the length,
but we can just take the min of the data on the page or cursor->resid.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This release is mostly bug fixes, clean-ups, and optimizations.
One notable set of fixes addresses a subtle buffer overflow issue
that occurs if a small RPC Call message arrives in an oversized
RPC record. This is only possible on a framed RPC transport such
as TCP.
Because NFSD shares the receive and send buffers in one set of
pages, an oversized RPC record steals pages from the send buffer
that will be used to construct the RPC Reply message. NFSD must
not assume that a full-sized buffer is always available to it;
otherwise, it will walk off the end of the send buffer while
constructing its reply.
In this release, we also introduce the ability for the server to
wait a moment for clients to return delegations before it responds
with NFS4ERR_DELAY. This saves a retransmit and a network round-
trip when a delegation recall is needed. This work will be built
upon in future releases.
The NFS server adds another shrinker to its collection. Because
courtesy clients can linger for quite some time, they might be
freeable when the server host comes under memory pressure. A new
shrinker has been added that releases courtesy client resources
during low memory scenarios.
Lastly, of note: the maximum number of operations per NFSv4
COMPOUND that NFSD can handle is increased from 16 to 50. There
are NFSv4 client implementations that need more than 16 to
successfully perform a mount operation that uses a pathname
with many components.
-----BEGIN PGP SIGNATURE-----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=hE6t
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"This release is mostly bug fixes, clean-ups, and optimizations.
One notable set of fixes addresses a subtle buffer overflow issue that
occurs if a small RPC Call message arrives in an oversized RPC record.
This is only possible on a framed RPC transport such as TCP.
Because NFSD shares the receive and send buffers in one set of pages,
an oversized RPC record steals pages from the send buffer that will be
used to construct the RPC Reply message. NFSD must not assume that a
full-sized buffer is always available to it; otherwise, it will walk
off the end of the send buffer while constructing its reply.
In this release, we also introduce the ability for the server to wait
a moment for clients to return delegations before it responds with
NFS4ERR_DELAY. This saves a retransmit and a network round- trip when
a delegation recall is needed. This work will be built upon in future
releases.
The NFS server adds another shrinker to its collection. Because
courtesy clients can linger for quite some time, they might be
freeable when the server host comes under memory pressure. A new
shrinker has been added that releases courtesy client resources during
low memory scenarios.
Lastly, of note: the maximum number of operations per NFSv4 COMPOUND
that NFSD can handle is increased from 16 to 50. There are NFSv4
client implementations that need more than 16 to successfully perform
a mount operation that uses a pathname with many components"
* tag 'nfsd-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (53 commits)
nfsd: extra checks when freeing delegation stateids
nfsd: make nfsd4_run_cb a bool return function
nfsd: fix comments about spinlock handling with delegations
nfsd: only fill out return pointer on success in nfsd4_lookup_stateid
NFSD: fix use-after-free on source server when doing inter-server copy
NFSD: Cap rsize_bop result based on send buffer size
NFSD: Rename the fields in copy_stateid_t
nfsd: use DEFINE_SHOW_ATTRIBUTE to define nfsd_file_cache_stats_fops
nfsd: use DEFINE_SHOW_ATTRIBUTE to define nfsd_reply_cache_stats_fops
nfsd: use DEFINE_SHOW_ATTRIBUTE to define client_info_fops
nfsd: use DEFINE_SHOW_ATTRIBUTE to define export_features_fops and supported_enctypes_fops
nfsd: use DEFINE_PROC_SHOW_ATTRIBUTE to define nfsd_proc_ops
NFSD: Pack struct nfsd4_compoundres
NFSD: Remove unused nfsd4_compoundargs::cachetype field
NFSD: Remove "inline" directives on op_rsize_bop helpers
NFSD: Clean up nfs4svc_encode_compoundres()
SUNRPC: Fix typo in xdr_buf_subsegment's kdoc comment
NFSD: Clean up WRITE arg decoders
NFSD: Use xdr_inline_decode() to decode NFSv3 symlinks
NFSD: Refactor common code out of dirlist helpers
...
The _SLOW designation wasn't really descriptive of anything. This is
meant to be called from process context when it's possible to sleep. So
name this more aptly _SLEEPABLE, which better fits its intended use.
Fixes: 62c07983be ("once: add DO_ONCE_SLOW() for sleepable contexts")
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221003181413.1221968-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add interface to support Power Sourcing Equipment. At current step it
provides generic way to address all variants of PSE devices as defined
in IEEE 802.3-2018 but support only objects specified for IEEE 802.3-2018 104.4
PoDL Power Sourcing Equipment (PSE).
Currently supported and mandatory objects are:
IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus
IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState
IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl
This is minimal interface needed to control PSE on each separate
ethernet port but it provides not all mandatory objects specified in
IEEE 802.3-2018.
Since "PoDL PSE" and "PSE" have similar names, but some different values
I decide to not merge them and keep separate naming schema. This should
allow as to be as close to IEEE 802.3 spec as possible and avoid name
conflicts in the future.
This implementation is connected to PHYs instead of MACs because PSE
auto classification can potentially interfere with PHY auto negotiation.
So, may be some extra PHY related initialization will be needed.
With WIP version of ethtools interaction with PSE capable link looks
as following:
$ ip l
...
5: t1l1@eth0: <BROADCAST,MULTICAST> ..
...
$ ethtool --show-pse t1l1
PSE attributs for t1l1:
PoDL PSE Admin State: disabled
PoDL PSE Power Detection Status: disabled
$ ethtool --set-pse t1l1 podl-pse-admin-control enable
$ ethtool --show-pse t1l1
PSE attributs for t1l1:
PoDL PSE Admin State: enabled
PoDL PSE Power Detection Status: delivering power
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2022-10-03
We've added 10 non-merge commits during the last 23 day(s) which contain
a total of 14 files changed, 130 insertions(+), 69 deletions(-).
The main changes are:
1) Fix dynptr helper API to gate behind CAP_BPF given it was not intended
for unprivileged BPF programs, from Kumar Kartikeya Dwivedi.
2) Fix need_wakeup flag inheritance from umem buffer pool for shared xsk
sockets, from Jalal Mostafa.
3) Fix truncated last_member_type_id in btf_struct_resolve() which had a
wrong storage type, from Lorenz Bauer.
4) Fix xsk back-pressure mechanism on tx when amount of produced
descriptors to CQ is lower than what was grabbed from xsk tx ring,
from Maciej Fijalkowski.
5) Fix wrong cgroup attach flags being displayed to effective progs,
from Pu Lehui.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xsk: Inherit need_wakeup flag for shared sockets
bpf: Gate dynptr API behind CAP_BPF
selftests/bpf: Adapt cgroup effective query uapi change
bpftool: Fix wrong cgroup attach flags being assigned to effective progs
bpf, cgroup: Reject prog_attach_flags array when effective query
bpf: Ensure correct locking around vulnerable function find_vpid()
bpf: btf: fix truncated last_member_type_id in btf_struct_resolve
selftests/xsk: Add missing close() on netns fd
xsk: Fix backpressure mechanism on Tx
MAINTAINERS: Add include/linux/tnum.h to BPF CORE
====================
Link: https://lore.kernel.org/r/20221003201957.13149-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-10-03
We've added 143 non-merge commits during the last 27 day(s) which contain
a total of 151 files changed, 8321 insertions(+), 1402 deletions(-).
The main changes are:
1) Add kfuncs for PKCS#7 signature verification from BPF programs, from Roberto Sassu.
2) Add support for struct-based arguments for trampoline based BPF programs,
from Yonghong Song.
3) Fix entry IP for kprobe-multi and trampoline probes under IBT enabled, from Jiri Olsa.
4) Batch of improvements to veristat selftest tool in particular to add CSV output,
a comparison mode for CSV outputs and filtering, from Andrii Nakryiko.
5) Add preparatory changes needed for the BPF core for upcoming BPF HID support,
from Benjamin Tissoires.
6) Support for direct writes to nf_conn's mark field from tc and XDP BPF program
types, from Daniel Xu.
7) Initial batch of documentation improvements for BPF insn set spec, from Dave Thaler.
8) Add a new BPF_MAP_TYPE_USER_RINGBUF map which provides single-user-space-producer /
single-kernel-consumer semantics for BPF ring buffer, from David Vernet.
9) Follow-up fixes to BPF allocator under RT to always use raw spinlock for the BPF
hashtab's bucket lock, from Hou Tao.
10) Allow creating an iterator that loops through only the resources of one
task/thread instead of all, from Kui-Feng Lee.
11) Add support for kptrs in the per-CPU arraymap, from Kumar Kartikeya Dwivedi.
12) Add a new kfunc helper for nf to set src/dst NAT IP/port in a newly allocated CT
entry which is not yet inserted, from Lorenzo Bianconi.
13) Remove invalid recursion check for struct_ops for TCP congestion control BPF
programs, from Martin KaFai Lau.
14) Fix W^X issue with BPF trampoline and BPF dispatcher, from Song Liu.
15) Fix percpu_counter leakage in BPF hashtab allocation error path, from Tetsuo Handa.
16) Various cleanups in BPF selftests to use preferred ASSERT_* macros, from Wang Yufen.
17) Add invocation for cgroup/connect{4,6} BPF programs for ICMP pings, from YiFei Zhu.
18) Lift blinding decision under bpf_jit_harden = 1 to bpf_capable(), from Yauheni Kaliuta.
19) Various libbpf fixes and cleanups including a libbpf NULL pointer deref, from Xin Liu.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (143 commits)
net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c
Documentation: bpf: Add implementation notes documentations to table of contents
bpf, docs: Delete misformatted table.
selftests/xsk: Fix double free
bpftool: Fix error message of strerror
libbpf: Fix overrun in netlink attribute iteration
selftests/bpf: Fix spelling mistake "unpriviledged" -> "unprivileged"
samples/bpf: Fix typo in xdp_router_ipv4 sample
bpftool: Remove unused struct event_ring_info
bpftool: Remove unused struct btf_attach_point
bpf, docs: Add TOC and fix formatting.
bpf, docs: Add Clang note about BPF_ALU
bpf, docs: Move Clang notes to a separate file
bpf, docs: Linux byteswap note
bpf, docs: Move legacy packet instructions to a separate file
selftests/bpf: Check -EBUSY for the recurred bpf_setsockopt(TCP_CONGESTION)
bpf: tcp: Stop bpf_setsockopt(TCP_CONGESTION) in init ops to recur itself
bpf: Refactor bpf_setsockopt(TCP_CONGESTION) handling into another function
bpf: Move the "cdg" tcp-cc check to the common sol_tcp_sockopt()
bpf: Add __bpf_prog_{enter,exit}_struct_ops for struct_ops trampoline
...
====================
Link: https://lore.kernel.org/r/20221003194915.11847-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Use max_t() to simplify open code which uses "if...else" to get maximum of
two values.
Generated by coccinelle script:
scripts/coccinelle/misc/minmax.cocci
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Use ida_alloc()/ida_free() instead of
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Christophe Leroy reported a ~80ms latency spike
happening at first TCP connect() time.
This is because __inet_hash_connect() uses get_random_once()
to populate a perturbation table which became quite big
after commit 4c2c8f03a5 ("tcp: increase source port perturb table to 2^16")
get_random_once() uses DO_ONCE(), which block hard irqs for the duration
of the operation.
This patch adds DO_ONCE_SLOW() which uses a mutex instead of a spinlock
for operations where we prefer to stay in process context.
Then __inet_hash_connect() can use get_random_slow_once()
to populate its perturbation table.
Fixes: 4c2c8f03a5 ("tcp: increase source port perturb table to 2^16")
Fixes: 190cc82489 ("tcp: change source port randomizarion at connect() time")
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/netdev/CANn89iLAEYBaoYajy0Y9UmGFff5GPxDUoG-ErVB2jDdRNQ5Tug@mail.gmail.com/T/#t
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot is hitting skb_assert_len() warning at raw_sendmsg() for ieee802154
socket. What commit dc633700f0 ("net/af_packet: check len when
min_header_len equals to 0") does also applies to ieee802154 socket.
Link: https://syzkaller.appspot.com/bug?extid=5ea725c25d06fb9114c4
Reported-by: syzbot <syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com>
Fixes: fd18942244 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current GRO stack only supports incoming packets containing
one frame/MSS.
This patch changes GRO to accept packets that are already GRO.
HW-GRO (aka RSC for some vendors) is very often limited in presence
of interleaved packets. Linux SW GRO stack can complete the job
and provide larger GRO packets, thus reducing rate of ACK packets
and cpu overhead.
This also means BIG TCP can still be used, even if HW-GRO/RSC was
able to cook ~64 KB GRO packets.
v2: fix logic in tcp_gro_receive()
Only support TCP for the moment (Paolo)
Co-Developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP data path is quite complex and hard to understend even
without some foggy comments referring to modified code and/or
completely misleading from the beginning.
Update a few of them to more accurately describing the current
status.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daire reported a user-space application hang-up when the
peer is forcibly closed before the data transfer completion.
The relevant application expects the peer to either
do an application-level clean shutdown or a transport-level
connection reset.
We can accommodate a such user by extending the fastclose
usage: at fd close time, if the msk socket has some unread
data, and at FIN_WAIT timeout.
Note that at MPTCP close time we must ensure that the TCP
subflows will reset: set the linger socket option to a suitable
value.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an mptcp socket is closed due to an incoming FASTCLOSE
option, so specific sk_err is set and later syscall will
fail usually with EPIPE.
Align the current fastclose error handling with TCP reset,
properly setting the socket error according to the current
msk state and propagating such error.
Additionally sendmsg() is currently not handling properly
the sk_err, always returning EPIPE.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported a sequence of memory leaks, and one of them indicated we
failed to free a whole sk:
unreferenced object 0xffff8880126e0000 (size 1088):
comm "syz-executor419", pid 326, jiffies 4294773607 (age 12.609s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 7d 00 00 00 00 00 00 00 ........}.......
01 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace:
[<000000006fefe750>] sk_prot_alloc+0x64/0x2a0 net/core/sock.c:1970
[<0000000074006db5>] sk_alloc+0x3b/0x800 net/core/sock.c:2029
[<00000000728cd434>] unix_create1+0xaf/0x920 net/unix/af_unix.c:928
[<00000000a279a139>] unix_create+0x113/0x1d0 net/unix/af_unix.c:997
[<0000000068259812>] __sock_create+0x2ab/0x550 net/socket.c:1516
[<00000000da1521e1>] sock_create net/socket.c:1566 [inline]
[<00000000da1521e1>] __sys_socketpair+0x1a8/0x550 net/socket.c:1698
[<000000007ab259e1>] __do_sys_socketpair net/socket.c:1751 [inline]
[<000000007ab259e1>] __se_sys_socketpair net/socket.c:1748 [inline]
[<000000007ab259e1>] __x64_sys_socketpair+0x97/0x100 net/socket.c:1748
[<000000007dedddc1>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<000000007dedddc1>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
[<000000009456679f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
We can reproduce this issue by creating two AF_UNIX SOCK_STREAM sockets,
send()ing an OOB skb to each other, and close()ing them without consuming
the OOB skbs.
int skpair[2];
socketpair(AF_UNIX, SOCK_STREAM, 0, skpair);
send(skpair[0], "x", 1, MSG_OOB);
send(skpair[1], "x", 1, MSG_OOB);
close(skpair[0]);
close(skpair[1]);
Currently, we free an OOB skb in unix_sock_destructor() which is called via
__sk_free(), but it's too late because the receiver's unix_sk(sk)->oob_skb
is accounted against the sender's sk->sk_wmem_alloc and __sk_free() is
called only when sk->sk_wmem_alloc is 0.
In the repro sequences, we do not consume the OOB skb, so both two sk's
sock_put() never reach __sk_free() due to the positive sk->sk_wmem_alloc.
Then, no one can consume the OOB skb nor call __sk_free(), and we finally
leak the two whole sk.
Thus, we must free the unconsumed OOB skb earlier when close()ing the
socket.
Fixes: 314001f0bf ("af_unix: Add OOB support")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ip_tunnel_netlink_parms to parse netlink msg of ip_tunnel_parm.
Reduces duplicate code, no actual functional changes.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ip_tunnel_netlink_encap_parms to parse netlink msg of ip_tunnel_encap.
Reduces duplicate code, no actual functional changes.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot is reporting lockdep warning at rds_tcp_reset_callbacks() [1], for
commit ac3615e7f3 ("RDS: TCP: Reduce code duplication in
rds_tcp_reset_callbacks()") added cancel_delayed_work_sync() into a section
protected by lock_sock() without realizing that rds_send_xmit() might call
lock_sock().
We don't need to protect cancel_delayed_work_sync() using lock_sock(), for
even if rds_{send,recv}_worker() re-queued this work while __flush_work()
from cancel_delayed_work_sync() was waiting for this work to complete,
retried rds_{send,recv}_worker() is no-op due to the absence of RDS_CONN_UP
bit.
Link: https://syzkaller.appspot.com/bug?extid=78c55c7bc6f66e53dce2 [1]
Reported-by: syzbot <syzbot+78c55c7bc6f66e53dce2@syzkaller.appspotmail.com>
Co-developed-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+78c55c7bc6f66e53dce2@syzkaller.appspotmail.com>
Fixes: ac3615e7f3 ("RDS: TCP: Reduce code duplication in rds_tcp_reset_callbacks()")
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
1) Refactor selftests to use an array of structs in xfrm_fill_key().
From Gautam Menghani.
2) Drop an unused argument from xfrm_policy_match.
From Hongbin Wang.
3) Support collect metadata mode for xfrm interfaces.
From Eyal Birger.
4) Add netlink extack support to xfrm.
From Sabrina Dubroca.
Please note, there is a merge conflict in:
include/net/dst_metadata.h
between commit:
0a28bfd497 ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support")
from the net-next tree and commit:
5182a5d48c ("net: allow storing xfrm interface metadata in metadata_dst")
from the ipsec-next tree.
Can be solved as done in linux-next.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
All bind_class callbacks are directly returned when n arg is empty.
Therefore, bind_class is invoked only when n arg is not empty.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since dsa_port_devlink_setup() and dsa_port_devlink_teardown() are
already called from code paths which only execute once per port (due to
the existing bool dp->setup), keeping another dp->devlink_port_setup is
redundant, because we can already manage to balance the calls properly
(and not call teardown when setup was never called, or call setup twice,
or things like that).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3122433eb5 ("net: dsa: Register devlink ports before calling DSA driver setup()")
moved devlink port setup to be done early before driver setup()
was called. That is no longer needed, so move the devlink port
initialization back to dsa_port_setup(), as the first thing done there.
Note there is no longer needed to reinit port as unused if
dsa_port_setup() fails, as it unregisters the devlink port instance on
the error path.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a desire to simplify the dsa_port registration path with
devlink, and this involves reworking a bit how user ports which fail to
connect to their PHY (because it's missing) get reinitialized as UNUSED
devlink ports.
The desire is for the change to look something like this; basically
dsa_port_setup() has failed, we just change dp->type and call
dsa_port_setup() again.
-/* Destroy the current devlink port, and create a new one which has the UNUSED
- * flavour.
- */
-static int dsa_port_reinit_as_unused(struct dsa_port *dp)
+static int dsa_port_setup_as_unused(struct dsa_port *dp)
{
- dsa_port_devlink_teardown(dp);
dp->type = DSA_PORT_TYPE_UNUSED;
- return dsa_port_devlink_setup(dp);
+ return dsa_port_setup(dp);
}
For an UNUSED port, dsa_port_setup() mostly only calls dsa_port_devlink_setup()
anyway, so we could get away with calling just that. But if we call the
full blown dsa_port_setup(dp) (which will be needed to properly set
dp->setup = true), the callee will have the tendency to go through this
code block too, and call dsa_port_disable(dp):
switch (dp->type) {
case DSA_PORT_TYPE_UNUSED:
dsa_port_disable(dp);
break;
That is not very good, because dsa_port_disable() has this hidden inside
of it:
if (dp->pl)
phylink_stop(dp->pl);
Fact is, we are not prepared to handle a call to dsa_port_disable() with
a struct dsa_port that came from a previous (and failed) call to
dsa_port_setup(). We do not clean up dp->pl, and this will make the
second call to dsa_port_setup() call phylink_stop() on a dangling dp->pl
pointer.
Solve this by creating an API for phylink destruction which is symmetric
to the phylink creation, and never leave dp->pl set to anything except
NULL or a valid phylink structure.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move port_setup() op to be called before devlink_port_register() and
port_teardown() after devlink_port_unregister().
Note it makes sense to move this alongside the rest of the devlink port
code, the reinit() function also gets much nicer, as clearly the fact that
port_setup()->devlink_port_region_create() was called in dsa_port_setup
did not fit the flow.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lifetime of some of the devlink objects, like regions, is currently
forced to be different for devlink instance and devlink port instance
(per-port regions). The reason is that for devlink ports, the internal
structures initialization happens only after devlink_port_register() is
called.
To resolve this inconsistency, introduce new set of helpers to allow
driver to initialize devlink pointer and region list before
devlink_register() is called. That allows port regions to be created
before devlink port registration and destroyed after devlink
port unregistration.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of relying on devlink pointer not being initialized, introduce
an extra flag to indicate if devlink port is registered. This is needed
as later on devlink pointer is going to be initialized even in case
devlink port is not registered yet.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of checking devlink_port->devlink pointer for not being NULL
which indicates that devlink port is registered, put this check to new
pair of helpers similar to what we have for devlink and use them in
other functions.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add RTL8761BUV device (Edimax BT-8500)
- Add a new PID/VID 13d3/3583 for MT7921
- Add Realtek RTL8852C support ID 0x13D3:0x3592
- Add VID/PID 0489/e0e0 for MediaTek MT7921
- Add a new VID/PID 0e8d/0608 for MT7921
- Add a new PID/VID 13d3/3578 for MT7921
- Add BT device 0cb8:c549 from RTW8852AE
- Add support for Intel Magnetor
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmM3jT0ZHGx1aXoudm9u
LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKYMhEACfjFS9KCeXyyAVSNk2RwF4
c+rhJW78VmAGd3yWCa+L/6g+xmxgF+sQYNJP35FMW6SAgL9K9yu3+hH0X4O2GNXT
YA9YltHOL60KVKAiHzMqTPwNUoafqbzVz3MLE/yragd9G8dZeMt2W4YObO6/UOoJ
2aWfUNZUNCTyUTHdM2ImXpgkrYe3/ytm/xNKBsJDnYG1MptQmmKAiOr1TUxPN0Sj
pq1Qg2mH9Qj1bo0250v8JVD3ya+NPmtMtCZ7a2vJcf/7BhzMqbxM6bGul3N34cpK
kDL7ma0rj0MqNKVdhY0hPUpLwE4ImNjpIjbZfUJ3KlLr0OqFcl9p7pXQXjeSlR9/
Jsfoyq+kcB693FX8U/6GjTivRmkVfOI3UQeej9tspSS20sLGGHzYczdQosm9vq5h
VZVJ3HowRXCs0tpEvssuwdITXMZTFjtEl8phAVkcap1GwUM+Qe1wz1jAzXGcuwoh
N8VHJIBR3DCfWh3c3S5y/J/PMuhxhayMjdaCQD7M10Fg00FvlY7iFvlocLCkHBga
sWmaBPDt8Ytp8Ar7lXdotw7ICFBZYX3AZe241PFngZBXFR3R50lqBtbJKV0YglSk
HViWhjwrvmOt3UclV/G8VFqxyRcBI5XgqDxyI6+1lg0PO5nJlfZJhkJJ8wyISEp1
238k6Y9EosV9ERlj9Zss/w==
=BmY6
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next
- Add RTL8761BUV device (Edimax BT-8500)
- Add a new PID/VID 13d3/3583 for MT7921
- Add Realtek RTL8852C support ID 0x13D3:0x3592
- Add VID/PID 0489/e0e0 for MediaTek MT7921
- Add a new VID/PID 0e8d/0608 for MT7921
- Add a new PID/VID 13d3/3578 for MT7921
- Add BT device 0cb8:c549 from RTW8852AE
- Add support for Intel Magnetor
* tag 'for-net-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (49 commits)
Bluetooth: hci_sync: Fix not indicating power state
Bluetooth: L2CAP: Fix user-after-free
Bluetooth: Call shutdown for HCI_USER_CHANNEL
Bluetooth: Prevent double register of suspend
Bluetooth: hci_core: Fix not handling link timeouts propertly
Bluetooth: hci_event: Make sure ISO events don't affect non-ISO connections
Bluetooth: hci_debugfs: Fix not checking conn->debugfs
Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times
Bluetooth: MGMT: fix zalloc-simple.cocci warnings
Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure
Bluetooth: use hdev->workqueue when queuing hdev->{cmd,ncmd}_timer works
Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create()
Bluetooth: RFCOMM: Fix possible deadlock on socket shutdown/release
Bluetooth: hci_sync: allow advertise when scan without RPA
Bluetooth: btusb: Add a new VID/PID 0e8d/0608 for MT7921
Bluetooth: btusb: Add a new PID/VID 13d3/3583 for MT7921
Bluetooth: avoid hci_dev_test_and_set_flag() in mgmt_init_hdev()
Bluetooth: btintel: Mark Intel controller to support LE_STATES quirk
Bluetooth: btintel: Add support for Magnetor
Bluetooth: btusb: Add a new PID/VID 13d3/3578 for MT7921
...
====================
Link: https://lore.kernel.org/r/20221001004602.297366-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 9c5d03d362 ("genetlink: start to validate reserved header bytes")
introduced extra validation for genetlink headers. We had to gate it
to only apply to new commands, to maintain bug-wards compatibility.
Use this opportunity (before the new checks make it to Linus's tree)
to add more conditions.
Validate that Generic Netlink families do not use nlmsg_flags outside
of the well-understood set.
Link: https://lore.kernel.org/all/20220928073709.1b93b74a@kernel.org/
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20220929142809.1167546-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When setting power state using legacy/non-mgmt API
(e.g hcitool hci0 up) the likes of mgmt_set_powered_complete won't be
called causing clients of the MGMT API to not be notified of the change
of the state.
Fixes: cf75ad8b41 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Few stack changes and lots of driver changes in this round. brcmfmac
has more activity as usual and it gets new hardware support. ath11k
improves WCN6750 support and also other smaller features. And of
course changes all over.
Note: in early September wireless tree was merged to wireless-next to
avoid some conflicts with mac80211 patches, this shouldn't cause any
problems but wanted to mention anyway.
Major changes:
mac80211
* refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO)
feature continues
brcmfmac
* support CYW43439 SDIO chipset
* support BCM4378 on Apple platforms
* support CYW89459 PCIe chipset
rtw89
* more work to get rtw8852c supported
* P2P support
* support for enabling and disabling MSDU aggregation via nl80211
mt76
* tx status reporting improvements
ath11k
* cold boot calibration support on WCN6750
* Target Wake Time (TWT) debugfs support for STA interface
* support to connect to a non-transmit MBSSID AP profile
* enable remain-on-channel support on WCN6750
* implement SRAM dump debugfs interface
* enable threaded NAPI on all hardware
* WoW support for WCN6750
* support to provide transmit power from firmware via nl80211
* support to get power save duration for each client
* spectral scan support for 160 MHz
wcn36xx
* add SNR from a received frame as a source of system entropy
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmM3BGYRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuR3Af/XiuMlnDB6flq+M/kQHLWWvHybLw5aCJ7
l3yXhNFWxpBl2hQXtj17JSjVCYQmxbfrgRqhbNhyACO25bpymCb5QctB9X+Y7TwL
250JmuKvQfFx5oJNRfJ67dKTf3raloQYbdEMJNqySgebL+eSfrDskc9vaCLVDmCK
I994fl0Q1wUbJ6fbuIFd07ti8ay6UlSS/iakv4+nEeimabtZWJWlXBWYRpKpikdP
h9z2kPtss6yz6seaQuw6ny+qysYLi11Tp+Cued9XR3dWOOhB2X1tLHH0H02xPw76
9OJZEJHycP2juxjMfAaktHY+VX36GPLsMLUTVusH0h/Fdy3VG8YSAw==
=emmG
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.1
Few stack changes and lots of driver changes in this round. brcmfmac
has more activity as usual and it gets new hardware support. ath11k
improves WCN6750 support and also other smaller features. And of
course changes all over.
Note: in early September wireless tree was merged to wireless-next to
avoid some conflicts with mac80211 patches, this shouldn't cause any
problems but wanted to mention anyway.
Major changes:
mac80211
- refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO)
feature continues
brcmfmac
- support CYW43439 SDIO chipset
- support BCM4378 on Apple platforms
- support CYW89459 PCIe chipset
rtw89
- more work to get rtw8852c supported
- P2P support
- support for enabling and disabling MSDU aggregation via nl80211
mt76
- tx status reporting improvements
ath11k
- cold boot calibration support on WCN6750
- Target Wake Time (TWT) debugfs support for STA interface
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- implement SRAM dump debugfs interface
- enable threaded NAPI on all hardware
- WoW support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
wcn36xx
- add SNR from a received frame as a source of system entropy
* tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits)
wifi: rtl8xxxu: Improve rtl8xxxu_queue_select
wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM
wifi: rtl8xxxu: gen2: Enable 40 MHz channel width
wifi: rtw89: 8852b: configure DLE mem
wifi: rtw89: check DLE FIFO size with reserved size
wifi: rtw89: mac: correct register of report IMR
wifi: rtw89: pci: set power cut closed for 8852be
wifi: rtw89: pci: add to do PCI auto calibration
wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf
wifi: rtw89: add DMA busy checking bits to chip info
wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels
wifi: rtw89: pci: mask out unsupported TX channels
iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
wifi: iwlwifi: Track scan_cmd allocation size explicitly
brcmfmac: Remove the call to "dtim_assoc" IOVAR
brcmfmac: increase dcmd maximum buffer size
brcmfmac: Support 89459 pcie
brcmfmac: increase default max WOWL patterns to 16
cw1200: fix incorrect check to determine if no element is found in list
...
====================
Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drivers should be aware of the range of valid UMEM chunk sizes to be
able to allocate their internal structures of an appropriate size. It
will be used by mlx5e in the following patches.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
CC: "Björn Töpel" <bjorn@kernel.org>
CC: Magnus Karlsson <magnus.karlsson@intel.com>
CC: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
pull request (net): ipsec 2022-09-29
1) Use the inner instead of the outer protocol for GSO on inter
address family tunnels. This fixes the GSO case for address
family tunnels. From Sabrina Dubroca.
2) Reset ipcomp_scratches with NULL when freed, otherwise
it holds obsolete address. From Khalid Masum.
3) Reinject transport-mode packets through workqueue
instead of a tasklet. The tasklet might take too
long to finish. From Liu Jian.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit fixes a bug in the tracking of max_packets_out and
is_cwnd_limited. This bug can cause the connection to fail to remember
that is_cwnd_limited is true, causing the connection to fail to grow
cwnd when it should, causing throughput to be lower than it should be.
The following event sequence is an example that triggers the bug:
(a) The connection is cwnd_limited, but packets_out is not at its
peak due to TSO deferral deciding not to send another skb yet.
In such cases the connection can advance max_packets_seq and set
tp->is_cwnd_limited to true and max_packets_out to a small
number.
(b) Then later in the round trip the connection is pacing-limited (not
cwnd-limited), and packets_out is larger. In such cases the
connection would raise max_packets_out to a bigger number but
(unexpectedly) flip tp->is_cwnd_limited from true to false.
This commit fixes that bug.
One straightforward fix would be to separately track (a) the next
window after max_packets_out reaches a maximum, and (b) the next
window after tp->is_cwnd_limited is set to true. But this would
require consuming an extra u32 sequence number.
Instead, to save space we track only the most important
information. Specifically, we track the strongest available signal of
the degree to which the cwnd is fully utilized:
(1) If the connection is cwnd-limited then we remember that fact for
the current window.
(2) If the connection not cwnd-limited then we track the maximum
number of outstanding packets in the current window.
In particular, note that the new logic cannot trigger the buggy
(a)/(b) sequence above because with the new logic a condition where
tp->packets_out > tp->max_packets_out can only trigger an update of
tp->is_cwnd_limited if tp->is_cwnd_limited is false.
This first showed up in a testing of a BBRv2 dev branch, but this
buggy behavior highlighted a general issue with the
tcp_cwnd_validate() logic that can cause cwnd to fail to increase at
the proper rate for any TCP congestion control, including Reno or
CUBIC.
Fixes: ca8a226343 ("tcp: make cwnd-limited checks measurement-based, and gentler")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Kevin(Yudong) Yang <yyd@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When it returns an error from sctp_auth_asoc_init_active_key(), the
active_key is actually not updated. The old sh_key will be freeed
while it's still used as active key in asoc. Then an use-after-free
will be triggered when sending patckets, as found by syzbot:
sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112
sctp_set_owner_w net/sctp/socket.c:132 [inline]
sctp_sendmsg_to_asoc+0xbd5/0x1a20 net/sctp/socket.c:1863
sctp_sendmsg+0x1053/0x1d50 net/sctp/socket.c:2025
inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
This patch is to fix it by not replacing the sh_key when it returns
errors from sctp_auth_asoc_init_active_key() in sctp_auth_set_key().
For sctp_auth_set_active_key(), old active_key_id will be set back
to asoc->active_key_id when the same thing happens.
Fixes: 58acd10092 ("sctp: update active_key for asoc when old key is being replaced")
Reported-by: syzbot+a236dd8e9622ed8954a3@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As 2.5G, 5G ethernet ports are more common and affordable,
these ports are being used in LAN bridge devices.
STP port_cost() is missing path_cost assignment for these link speeds,
causes highest cost 100 being used.
This result in lower speed port being picked
when there is loop between 5G and 1G ports.
Original path_cost: 10G=2, 1G=4, 100m=19, 10m=100
Adjusted path_cost: 10G=2, 5G=3, 2.5G=4, 1G=5, 100m=19, 10m=100
speed greater than 10G = 1
Signed-off-by: Steven Hsieh <steven.hsieh@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pskb_may_pull already contains all of the checks performed by
pskb_pull.
Use pskb_may_pull for validation in pskb_pull, eliminating the
duplication and making __pskb_pull obsolete.
Replace __pskb_pull with pskb_pull where applicable.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the value
to be returned to user space.
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data
types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the
existence of a per traffic class limitation of maximum frame sizes, with
a fallback on the port-based MTU.
As far as I am able to understand, the 802.1Q Service Data Unit (SDU)
represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding
any number of prepended VLAN headers which may be otherwise present in
the MSDU. Therefore, the queueMaxSDU is directly comparable to the
device MTU (1500 means L2 payload sizes are accepted, or frame sizes of
1518 octets, or 1522 plus one VLAN header). Drivers which offload this
are directly responsible of translating into other units of measurement.
To keep the fast path checks optimized, we keep 2 arrays in the qdisc,
one for max_sdu translated into frame length (so that it's comparable to
skb->len), and another for offloading and for dumping back to the user.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When adding optional new features to Qdisc offloads, existing drivers
must reject the new configuration until they are coded up to act on it.
Since modifying all drivers in lockstep with the changes in the Qdisc
can create problems of its own, it would be nice if there existed an
automatic opt-in mechanism for offloading optional features.
Jakub proposes that we multiplex one more kind of call through
ndo_setup_tc(): one where the driver populates a Qdisc-specific
capability structure.
First user will be taprio in further changes. Here we are introducing
the definitions for the base functionality.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20220923163310.3192733-3-vladimir.oltean@nxp.com/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 09b5678c778f("tipc: remove dead code in tipc_net and relatives"),
struct distr_queue_item is not used any more and can be removed as well.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/20220928085636.71749-1-yuancan@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 3226b158e6 ("net: avoid 32 x truesize under-estimation
for tiny skbs") we are observing 10-20% regressions in performance
tests with small packets. The perf trace points to high pressure on
the slab allocator.
This change tries to improve the allocation schema for small packets
using an idea originally suggested by Eric: a new per CPU page frag is
introduced and used in __napi_alloc_skb to cope with small allocation
requests.
To ensure that the above does not lead to excessive truesize
underestimation, the frag size for small allocation is inflated to 1K
and all the above is restricted to build with 4K page size.
Note that we need to update accordingly the run-time check introduced
with commit fd9ea57f4e ("net: add napi_get_frags_check() helper").
Alex suggested a smart page refcount schema to reduce the number
of atomic operations and deal properly with pfmemalloc pages.
Under small packet UDP flood, I measure a 15% peak tput increases.
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Suggested-by: Alexander H Duyck <alexanderduyck@fb.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/6b6f65957c59f86a353fc09a5127e83a32ab5999.1664350652.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This uses l2cap_chan_hold_unless_zero() after calling
__l2cap_get_chan_blah() to prevent the following trace:
Bluetooth: l2cap_core.c:static void l2cap_chan_destroy(struct kref
*kref)
Bluetooth: chan 0000000023c4974d
Bluetooth: parent 00000000ae861c08
==================================================================
BUG: KASAN: use-after-free in __mutex_waiter_is_first
kernel/locking/mutex.c:191 [inline]
BUG: KASAN: use-after-free in __mutex_lock_common
kernel/locking/mutex.c:671 [inline]
BUG: KASAN: use-after-free in __mutex_lock+0x278/0x400
kernel/locking/mutex.c:729
Read of size 8 at addr ffff888006a49b08 by task kworker/u3:2/389
Link: https://lore.kernel.org/lkml/20220622082716.478486-1-lee.jones@linaro.org
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
When a bad bpf prog '.init' calls
bpf_setsockopt(TCP_CONGESTION, "itself"), it will trigger this loop:
.init => bpf_setsockopt(tcp_cc) => .init => bpf_setsockopt(tcp_cc) ...
... => .init => bpf_setsockopt(tcp_cc).
It was prevented by the prog->active counter before but the prog->active
detection cannot be used in struct_ops as explained in the earlier
patch of the set.
In this patch, the second bpf_setsockopt(tcp_cc) is not allowed
in order to break the loop. This is done by using a bit of
an existing 1 byte hole in tcp_sock to check if there is
on-going bpf_setsockopt(TCP_CONGESTION) in this tcp_sock.
Note that this essentially limits only the first '.init' can
call bpf_setsockopt(TCP_CONGESTION) to pick a fallback cc (eg. peer
does not support ECN) and the second '.init' cannot fallback to
another cc. This applies even the second
bpf_setsockopt(TCP_CONGESTION) will not cause a loop.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220929070407.965581-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch moves the bpf_setsockopt(TCP_CONGESTION) logic into
another function. The next patch will add extra logic to avoid
recursion and this will make the latter patch easier to follow.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220929070407.965581-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The check on the tcp-cc, "cdg", is done in the bpf_sk_setsockopt which is
used by the bpf_tcp_ca, bpf_lsm, cg_sockopt, and tcp_iter hooks.
However, it is not done for cg sock_ddr, cg sockops, and some of
the bpf_lsm_cgroup hooks.
The tcp-cc "cdg" should have very limited usage. This patch is to
move the "cdg" check to the common sol_tcp_sockopt() so that all
hooks have a consistent behavior. The motivation to make
this check consistent now is because the latter patch will
refactor the bpf_setsockopt(TCP_CONGESTION) into another function,
so it is better to take this chance to refactor this piece
also.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220929070407.965581-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The mptcp socket and its subflow sockets in accept queue can't be
released after the process exit.
While the release of a mptcp socket in listening state, the
corresponding tcp socket will be released too. Meanwhile, the tcp
socket in the unaccept queue will be released too. However, only init
subflow is in the unaccept queue, and the joined subflow is not in the
unaccept queue, which makes the joined subflow won't be released, and
therefore the corresponding unaccepted mptcp socket will not be released
to.
This can be reproduced easily with following steps:
1. create 2 namespace and veth:
$ ip netns add mptcp-client
$ ip netns add mptcp-server
$ sysctl -w net.ipv4.conf.all.rp_filter=0
$ ip netns exec mptcp-client sysctl -w net.mptcp.enabled=1
$ ip netns exec mptcp-server sysctl -w net.mptcp.enabled=1
$ ip link add red-client netns mptcp-client type veth peer red-server \
netns mptcp-server
$ ip -n mptcp-server address add 10.0.0.1/24 dev red-server
$ ip -n mptcp-server address add 192.168.0.1/24 dev red-server
$ ip -n mptcp-client address add 10.0.0.2/24 dev red-client
$ ip -n mptcp-client address add 192.168.0.2/24 dev red-client
$ ip -n mptcp-server link set red-server up
$ ip -n mptcp-client link set red-client up
2. configure the endpoint and limit for client and server:
$ ip -n mptcp-server mptcp endpoint flush
$ ip -n mptcp-server mptcp limits set subflow 2 add_addr_accepted 2
$ ip -n mptcp-client mptcp endpoint flush
$ ip -n mptcp-client mptcp limits set subflow 2 add_addr_accepted 2
$ ip -n mptcp-client mptcp endpoint add 192.168.0.2 dev red-client id \
1 subflow
3. listen and accept on a port, such as 9999. The nc command we used
here is modified, which makes it use mptcp protocol by default.
$ ip netns exec mptcp-server nc -l -k -p 9999
4. open another *two* terminal and use each of them to connect to the
server with the following command:
$ ip netns exec mptcp-client nc 10.0.0.1 9999
Input something after connect to trigger the connection of the second
subflow. So that there are two established mptcp connections, with the
second one still unaccepted.
5. exit all the nc command, and check the tcp socket in server namespace.
And you will find that there is one tcp socket in CLOSE_WAIT state
and can't release forever.
Fix this by closing all of the unaccepted mptcp socket in
mptcp_subflow_queue_clean() with __mptcp_close().
Now, we can ensure that all unaccepted mptcp sockets will be cleaned by
__mptcp_close() before they are released, so mptcp_sock_destruct(), which
is used to clean the unaccepted mptcp socket, is not needed anymore.
The selftests for mptcp is ran for this commit, and no new failures.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Fixes: 6aeed90450 ("mptcp: fix race on unaccepted mptcp sockets")
Cc: stable@vger.kernel.org
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out __mptcp_close() from mptcp_close(). The caller of
__mptcp_close() should hold the socket lock, and cancel mptcp work when
__mptcp_close() returns true.
This function will be used in the next commit.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Fixes: 6aeed90450 ("mptcp: fix race on unaccepted mptcp sockets")
Cc: stable@vger.kernel.org
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We tell driver developers to always pass NAPI_POLL_WEIGHT
as the weight to netif_napi_add(). This may be confusing
to newcomers, drop the weight argument, those who really
need to tweak the weight can use netif_napi_add_weight().
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN
Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The v6_rcv_saddr and rcv_saddr are inside a union in the
'struct inet_bind2_bucket'. When searching a bucket by following the
bhash2 hashtable chain, eg. inet_bind2_bucket_match, it is only using
the sk->sk_family and there is no way to check if the inet_bind2_bucket
has a v6 or v4 address in the union. This leads to an uninit-value
KMSAN report in [0] and also potentially incorrect matches.
This patch fixes it by adding a family member to the inet_bind2_bucket
and then tests 'sk->sk_family != tb->family' before matching
the sk's address to the tb's address.
Cc: Joanne Koong <joannelkoong@gmail.com>
Fixes: 28044fc1d4 ("net: Add a bhash2 table hashed by port and address")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/r/20220927002544.3381205-1-kafai@fb.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If fastopen is used, poll must allow a first write that will trigger
the SYN+data
Similar to what is done in tcp_poll().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When TCP_FASTOPEN_CONNECT has been set on the socket before a connect,
the defer flag is set and must be handled when sendmsg is called.
This is similar to what is done in tcp_sendmsg_locked().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It will be used to support TCP FastOpen with MPTCP in the following
commit.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set the option for the first subflow only. For the other subflows TFO
can't be used because a mapping would be needed to cover the data in the
SYN.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can benefit from a smaller struct ubuf_info, so leave only mandatory
fields and let users to decide how they want to extend it. Convert
MSG_ZEROCOPY to struct ubuf_info_msgzc and remove duplicated fields.
This reduces the size from 48 bytes to just 16.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some drivers depend on shutdown being called for proper operation.
Unset HCI_USER_CHANNEL and call the full close routine since shutdown is
complementary to setup.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Suspend notifier should only be registered and unregistered once per
hdev. Simplify this by only registering during driver registration and
simply exiting early when HCI_USER_CHANNEL is set.
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 359ee4f834 (Bluetooth: Unregister suspend with userchannel)
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reverts commit 1d0403d20f.
Anatoly Pugachev reported that the commit 1d0403d20f ("net: set proper
memcg for net_init hooks allocations") is somehow causing the sparc64
VMs failed to boot and the VMs boot fine with that patch reverted. So,
revert the patch for now and later we can debug the issue.
Link: https://lore.kernel.org/all/20220918092849.GA10314@u164.east.ru/
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: Vasily Averin <vvs@openvz.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: cgroups@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Fixes: 1d0403d20f ("net: set proper memcg for net_init hooks allocations")
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Analogous to commit b575b24b8e ("netfilter: Fix rpfilter
dropping vrf packets by mistake") but for nftables fib expression:
Add special treatment of VRF devices so that typical reverse path
filtering via 'fib saddr . iif oif' expression works as expected.
Fixes: f6d0cbcf09 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Both is_bpf and is_ebpf are boolean types, so
(!is_bpf && !is_ebpf) || (is_bpf && is_ebpf) can be reduced to
is_bpf == is_ebpf in tcf_bpf_init().
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change that introduced the use of __check_timeout did not account for
link types properly, it always assumes ACL_LINK is used thus causing
hdev->acl_last_tx to be used even in case of LE_LINK and then again
uses ACL_LINK with hci_link_tx_to.
To fix this __check_timeout now takes the link type as parameter and
then procedure to use the right last_tx based on the link type and pass
it to hci_link_tx_to.
Fixes: 1b1d29e514 ("Bluetooth: Make use of __check_timeout on hci_sched_le")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: David Beinder <david@beinder.at>
To work around a misbehavior of the compiler's ability to see into
composite flexible array structs (as detailed in the coming memcpy()
hardening series[1]), split the memcpy() of the header and the payload
so no false positive run-time overflow warning will be generated. This
split already existed for the "firstfrag" case, so just generalize the
logic further.
[1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org/
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220924040835.3364912-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to the previous commit, the Netlink interface of the OVS
conntrack module was restricted to global CAP_NET_ADMIN by using
GENL_ADMIN_PERM. This is changed to GENL_UNS_ADMIN_PERM to support
unprivileged containers in non-initial user namespace.
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Netlink interface for metering was restricted to global CAP_NET_ADMIN
by using GENL_ADMIN_PERM. To allow metring in a non-inital user namespace,
e.g., a container, this is changed to GENL_UNS_ADMIN_PERM.
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 6911458dc4 ("wifi: mac80211: mlme: refactor assoc success
handling") moved the per-link setup out of ieee80211_assoc_success() into a
new function ieee80211_assoc_config_link() but missed to remove the unlock
of 'sta_mtx' in case of HE capability/operation missing on HE AP, which
leads to a double unlock:
ieee80211_assoc_success() {
...
ieee80211_assoc_config_link() {
...
if (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
(!elems->he_cap || !elems->he_operation)) {
mutex_unlock(&sdata->local->sta_mtx);
...
}
...
}
...
mutex_unlock(&sdata->local->sta_mtx);
...
}
Fixes: 6911458dc4 ("wifi: mac80211: mlme: refactor assoc success handling")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20220925143420.784975-1-rafaelmendsr@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 98b0b46746 ("wifi: mac80211: mlme: use correct link_sta")
switched to link station instead of deflink and added some checks to do
that, which are done with the 'sta_mtx' mutex held. However, the error
path of these checks does not unlock 'sta_mtx' before returning.
Fixes: 98b0b46746 ("wifi: mac80211: mlme: use correct link_sta")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20220924184042.778676-1-rafaelmendsr@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During our testing of WFM200 module over SDIO on i.MX6Q-based platform,
we discovered a memory corruption on the system, tracing back to the wfx
driver. Using kfence, it was possible to trace it back to the root
cause, which is hw->max_rates set to 8 in wfx_init_common,
while the maximum defined by IEEE80211_TX_TABLE_SIZE is 4.
This causes array out-of-bounds writes during updates of the rate table,
as seen below:
BUG: KFENCE: memory corruption in kfree_rcu_work+0x320/0x36c
Corrupted memory at 0xe0a4ffe0 [ 0x03 0x03 0x03 0x03 0x01 0x00 0x00
0x02 0x02 0x02 0x09 0x00 0x21 0xbb 0xbb 0xbb ] (in kfence-#81):
kfree_rcu_work+0x320/0x36c
process_one_work+0x3ec/0x920
worker_thread+0x60/0x7a4
kthread+0x174/0x1b4
ret_from_fork+0x14/0x2c
0x0
kfence-#81: 0xe0a4ffc0-0xe0a4ffdf, size=32, cache=kmalloc-64
allocated by task 297 on cpu 0 at 631.039555s:
minstrel_ht_update_rates+0x38/0x2b0 [mac80211]
rate_control_tx_status+0xb4/0x148 [mac80211]
ieee80211_tx_status_ext+0x364/0x1030 [mac80211]
ieee80211_tx_status+0xe0/0x118 [mac80211]
ieee80211_tasklet_handler+0xb0/0xe0 [mac80211]
tasklet_action_common.constprop.0+0x11c/0x148
__do_softirq+0x1a4/0x61c
irq_exit+0xcc/0x104
call_with_stack+0x18/0x20
__irq_svc+0x80/0xb0
wq_worker_sleeping+0x10/0x100
wq_worker_sleeping+0x10/0x100
schedule+0x50/0xe0
schedule_timeout+0x2e0/0x474
wait_for_completion+0xdc/0x1ec
mmc_wait_for_req_done+0xc4/0xf8
mmc_io_rw_extended+0x3b4/0x4ec
sdio_io_rw_ext_helper+0x290/0x384
sdio_memcpy_toio+0x30/0x38
wfx_sdio_copy_to_io+0x88/0x108 [wfx]
wfx_data_write+0x88/0x1f0 [wfx]
bh_work+0x1c8/0xcc0 [wfx]
process_one_work+0x3ec/0x920
worker_thread+0x60/0x7a4
kthread+0x174/0x1b4
ret_from_fork+0x14/0x2c 0x0
After discussion on the wireless mailing list it was clarified
that the issue has been introduced by:
commit ee0e16ab75 ("mac80211: minstrel_ht: fill all requested rates")
and fix shall be in minstrel_ht_update_rates in rc80211_minstrel_ht.c.
Fixes: ee0e16ab75 ("mac80211: minstrel_ht: fill all requested rates")
Link: https://lore.kernel.org/all/12e5adcd-8aed-f0f7-70cc-4fb7b656b829@camlingroup.com/
Link: https://lore.kernel.org/linux-wireless/20220915131445.30600-1-lech.perczak@camlingroup.com/
Cc: Jérôme Pouiller <jerome.pouiller@silabs.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Drobiński <krzysztof.drobinski@camlingroup.com>,
Signed-off-by: Paweł Lenkow <pawel.lenkow@camlingroup.com>
Signed-off-by: Lech Perczak <lech.perczak@camlingroup.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 10cb8e6175 ("mac80211: enable QoS support for nl80211 ctrl port")
changed ieee80211_tx_control_port() to aways call
__ieee80211_select_queue() without checking local->hw.queues.
__ieee80211_select_queue() returns a queue-id between 0 and 3, which means
that now ieee80211_tx_control_port() may end up setting the queue-mapping
for a skb to a value higher then local->hw.queues if local->hw.queues
is less then 4.
Specifically this is a problem for ralink rt2500-pci cards where
local->hw.queues is 2. There this causes rt2x00queue_get_tx_queue() to
return NULL and the following error to be logged: "ieee80211 phy0:
rt2x00mac_tx: Error - Attempt to send packet over invalid queue 2",
after which association with the AP fails.
Other callers of __ieee80211_select_queue() skip calling it when
local->hw.queues < IEEE80211_NUM_ACS, add the same check to
ieee80211_tx_control_port(). This fixes ralink rt2500-pci and
similar cards when less then 4 tx-queues no longer working.
Fixes: 10cb8e6175 ("mac80211: enable QoS support for nl80211 ctrl port")
Cc: Markus Theil <markus.theil@tu-ilmenau.de>
Suggested-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220918192052.443529-1-hdegoede@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make sure local->queue_stop_reasons and vif.txqs_stopped stay in sync.
When a new vif is created the queues may end up in an inconsistent state
and be inoperable:
Communication not using iTXQ will work, allowing to e.g. complete the
association. But the 4-way handshake will time out. The sta will not
send out any skbs queued in iTXQs.
All normal attempts to start the queues will fail when reaching this
state.
local->queue_stop_reasons will have marked all queues as operational but
vif.txqs_stopped will still be set, creating an inconsistent internal
state.
In reality this seems to be race between the mac80211 function
ieee80211_do_open() setting SDATA_STATE_RUNNING and the wake_txqs_tasklet:
Depending on the driver and the timing the queues may end up to be
operational or not.
Cc: stable@vger.kernel.org
Fixes: f856373e2f ("wifi: mac80211: do not wake queues on a vif that is being stopped")
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Acked-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220915130946.302803-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_txq_purge() calls fq_tin_reset() and
ieee80211_purge_tx_queue(); Both are then calling
ieee80211_free_txskb(). Which can decide to TX the skb again.
There are at least two ways to get a deadlock:
1) When we have a TDLS teardown packet queued in either tin or frags
ieee80211_tdls_td_tx_handle() will call ieee80211_subif_start_xmit()
while we still hold fq->lock. ieee80211_txq_enqueue() will thus
deadlock.
2) A variant of the above happens if aggregation is up and running:
In that case ieee80211_iface_work() will deadlock with the original
task: The original tasks already holds fq->lock and tries to get
sta->lock after kicking off ieee80211_iface_work(). But the worker
can get sta->lock prior to the original task and will then spin for
fq->lock.
Avoid these deadlocks by not sending out any skbs when called via
ieee80211_free_txskb().
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20220915124120.301918-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Bitrate for HE/EHT MCS6 is calculated wrongly due to the
incorrect MCS divisor value for mcs6. Fix it with the proper
value.
previous mcs_divisor value = (11769/6144) = 1.915527
fixed mcs_divisor value = (11377/6144) = 1.851725
Fixes: 9c97c88d2f ("cfg80211: Add support to calculate and report 4096-QAM HE rates")
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Link: https://lore.kernel.org/r/20220908181034.9936-1-quic_tamizhr@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nf_ct_put need to be called to put the refcount got by tcf_ct_fill_params
to avoid possible refcount leak when tcf_ct_flow_table_get fails.
Fixes: c34b961a24 ("net/sched: act_ct: Create nf flow table per zone")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220923020046.8021-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
taprio_dev_notifier() subscribes to netdev state changes in order to
determine whether interfaces which have a taprio root qdisc have changed
their link speed, so the internal calculations can be adapted properly.
The 'qdev' temporary variable serves no purpose, because we just use it
only once, and can just as well use qdisc_dev(q->root) directly (or the
"dev" that comes from the netdev notifier; this is because qdev is only
interesting if it was the subject of the state change, _and_ its root
qdisc belongs in the taprio list).
The 'found' variable also doesn't really serve too much of a purpose
either; we can just call taprio_set_picos_per_byte() within the loop,
and exit immediately afterwards.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20220923145921.3038904-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As pointed out during review, currently the following set of commands
crashes the kernel:
$ ip netns add ns0
$ ip link set swp0 netns ns0
$ ip netns del ns0
WARNING: CPU: 1 PID: 27 at net/core/dev.c:10884 unregister_netdevice_many+0xaa4/0xaec
Workqueue: netns cleanup_net
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : unregister_netdevice_many+0xaa4/0xaec
lr : unregister_netdevice_many+0x700/0xaec
Call trace:
unregister_netdevice_many+0xaa4/0xaec
default_device_exit_batch+0x294/0x340
ops_exit_list+0xac/0xc4
cleanup_net+0x2e4/0x544
process_one_work+0x4ec/0xb40
---[ end trace 0000000000000000 ]---
unregister_netdevice: waiting for swp0 to become free. Usage count = 2
This is because since DSA user ports, since they started populating
dev->rtnl_link_ops in the blamed commit, gained a different treatment
from default_device_exit_net(), which thinks these interfaces can now be
unregistered.
They can't; so set netns_refund = true to restore the behavior prior to
populating dev->rtnl_link_ops.
Fixes: 95f510d0b7 ("net: dsa: allow the DSA master to be seen and changed through rtnetlink")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220921185428.1767001-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During LPC2022 I meetup with my page_pool co-maintainer Ilias. When
discussing page_pool code we realised/remembered certain optimizations
had not been fully utilised.
Since commit c07aea3ef4 ("mm: add a signature in struct page") struct
page have a direct pointer to the page_pool object this page was
allocated from.
Thus, with this info it is possible to skip the rhashtable_lookup to
find the page_pool object in __xdp_return().
The rcu_read_lock can be removed as it was tied to xdp_mem_allocator.
The page_pool object is still safe to access as it tracks inflight pages
and (potentially) schedules final release from a work queue.
Created a micro benchmark of XDP redirecting from mlx5 into veth with
XDP_DROP bpf-prog on the peer veth device. This increased performance
6.5% from approx 8.45Mpps to 9Mpps corresponding to using 7 nanosec
(27 cycles at 3.8GHz) less per packet.
Suggested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/166377993287.1737053.10258297257583703949.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dust has settled a bit and it's become obvious what code is
totally common between nfsd_init_dirlist_pages() and
nfsd3_init_dirlist_pages(). Move that common code to SUNRPC.
The new helper brackets the existing xdr_init_decode_pages() API.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Note the function returns a per-transport value, not a per-request
value (eg, one that is related to the size of the available send or
receive buffer space).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently, SUNRPC clears the whole of .pc_argsize before processing
each incoming RPC transaction. Add an extra parameter to struct
svc_procedure to enable upper layers to reduce the amount of each
operation's argument structure that is zeroed by SUNRPC.
The size of struct nfsd4_compoundargs, in particular, is a lot to
clear on each incoming RPC Call. A subsequent patch will cut this
down to something closer to what NFSv2 and NFSv3 uses.
This patch should cause no behavior changes.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Move exception handling code out of the hot path, and avoid the need
for a bswap of a non-constant.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Similar to udp_read_skb(), delete the unnecessary while loop in
unix_read_skb() for readability. Since recv_actor() cannot return a
value greater than skb->len (see sk_psock_verdict_recv()), remove the
redundant check.
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Link: https://lore.kernel.org/r/7009141683ad6cd3785daced3e4a80ba0eb773b5.1663909008.git.peilin.ye@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Delete the unnecessary while loop in udp_read_skb() for readability.
Additionally, since recv_actor() cannot return a value greater than
skb->len (see sk_psock_verdict_recv()), remove the redundant check.
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Link: https://lore.kernel.org/r/343b5d8090a3eb764068e9f1d392939e2b423747.1663909008.git.peilin.ye@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In sk_psock_backlog function, for ingress direction skb, if no new data
packet arrives after the skb is cached, the cached skb does not have a
chance to be added to the receive queue of psock. As a result, the cached
skb cannot be received by the upper-layer application. Fix this by reschedule
the psock work to dispose the cached skb in sk_msg_recvmsg function.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220907071311.60534-1-liujian56@huawei.com
Appeared in its present state in pre-git (2.5.41), never used
Found with
grep MAGIC Documentation/process/magic-number.rst | while read -r mag _;
do git grep -wF "$mag" | grep -ve '^Documentation.*magic-number.rst:' \
-qe ':#define '"$mag" || git grep -wF "$mag" | while IFS=: read -r f _;
do sed -i '/\b'"$mag"'\b/d' "$f"; done ; done
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Link: https://lore.kernel.org/r/f6d375201dfd99416ea03b49b3dd40af56c1537e.1663280877.git.nabijaczleweli@nabijaczleweli.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Blamed commit added a txhash parameter to tcp_v6_send_response()
but forgot to update tcp_v6_send_reset() accordingly.
Fixes: aa51b80e1a ("ipv6: tcp: send consistent autoflowlabel in SYN_RECV state")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220922165036.1795862-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
for-6.0 has the following fix for cgroup_get_from_id().
836ac87d ("cgroup: fix cgroup_get_from_id")
which conflicts with the following two commits in for-6.1.
4534dee9 ("cgroup: cgroup: Honor caller's cgroup NS when resolving cgroup id")
fa7e439c ("cgroup: Homogenize cgroup_get_from_id() return value")
While the resolution is straightforward, the code ends up pretty ugly
afterwards. Let's pull for-6.0-fixes into for-6.1 so that the code can be
fixed up there.
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmMtnygTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXXOLCACFQGHCZrUGdWBw83UDA9r/lHuiIRuX
ELaSq1h9PJ2BC2+4t/4uDClJgvSYkxJkomNUVDDvbMK8gNTdVdIuHzaR12kerVWs
ArG/g0tjRE3ed5I3JWIOZ/ukfVmsVy/Rm/cwtqtWibJNSFtZuiodN1sYtS3Bv4i3
9sAdU6++LW/4OSAMss0+6VakC27/D5GJEZuEdYveqtf/TunrqNKGL2M5YmbenRoD
Bnx7FIiPHeL8pYz97W5ZEyGzZH90AuKOvHmx3+cHgZVHDzyBKd0UNLgisYFwXo9w
+9tfyZMZqzIZL2R0f3GVGPSvJGnLaX73bdgc8FAas/mY9WJze7plYWKt
=8zkH
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.1-20220923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-09-23
The first 2 patches are by Ziyang Xuan and optimize registration and
the sending in the CAN BCM protocol a bit.
The next 8 patches target the gs_usb driver. 7 are by me and first fix
the time hardware stamping support (added during this net-next cycle),
rename a variable, convert the usb_control_msg + manual
kmalloc()/kfree() to usb_control_msg_{send,rev}(), clean up the error
handling and add switchable termination support. The patch by Rhett
Aultman and Vasanth Sadhasivan convert the driver from
usb_alloc_coherent()/usb_free_coherent() to kmalloc()/URB_FREE_BUFFER.
The last patch is by Shang XiaoJing and removes an unneeded call to
dev_err() from the ctucanfd driver.
* tag 'linux-can-next-for-6.1-20220923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: ctucanfd: Remove redundant dev_err call
can: gs_usb: remove dma allocations
can: gs_usb: add switchable termination support
can: gs_usb: gs_make_candev(): clean up error handling
can: gs_usb: convert from usb_control_msg() to usb_control_msg_{send,recv}()
can: gs_usb: gs_cmd_reset(): rename variable holding struct gs_can pointer to dev
can: gs_usb: gs_can_open(): initialize time counter before starting device
can: gs_usb: add missing lock to protect struct timecounter::cycle_last
can: gs_usb: gs_usb_get_timestamp(): fix endpoint parameter for usb_control_msg_recv()
can: bcm: check the result of can_send() in bcm_can_tx()
can: bcm: registration process optimization in bcm_module_init()
====================
Link: https://lore.kernel.org/r/20220923120859.740577-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If can_send() fail, it should not update frames_abs counter
in bcm_can_tx(). Add the result check for can_send() in bcm_can_tx().
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Suggested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/all/9851878e74d6d37aee2f1ee76d68361a46f89458.1663206163.git.william.xuanziyang@huawei.com
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Now, register_netdevice_notifier() and register_pernet_subsys() are both
after can_proto_register(). It can create CAN_BCM socket and process socket
once can_proto_register() successfully, so it is possible missing notifier
event or proc node creation because notifier or bcm proc directory is not
registered or created yet. Although this is a low probability scenario, it
is not impossible.
Move register_pernet_subsys() and register_netdevice_notifier() to the
front of can_proto_register(). In addition, register_pernet_subsys() and
register_netdevice_notifier() may fail, check their results are necessary.
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/all/823cff0ebec33fa9389eeaf8b8ded3217c32cb38.1663206163.git.william.xuanziyang@huawei.com
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This adds support for rate matching (also known as rate adaptation) to
the phy subsystem. The general idea is that the phy interface runs at
one speed, and the MAC throttles the rate at which it sends packets to
the link speed. There's a good overview of several techniques for
achieving this at [1]. This patch adds support for three: pause-frame
based (such as in Aquantia phys), CRS-based (such as in 10PASS-TS and
2BASE-TL), and open-loop-based (such as in 10GBASE-W).
This patch makes a few assumptions and a few non assumptions about the
types of rate matching available. First, it assumes that different phys
may use different forms of rate matching. Second, it assumes that phys
can use rate matching for any of their supported link speeds (e.g. if a
phy supports 10BASE-T and XGMII, then it can adapt XGMII to 10BASE-T).
Third, it does not assume that all interface modes will use the same
form of rate matching. Fourth, it does not assume that all phy devices
will support rate matching (even if some do). Relaxing or strengthening
these (non-)assumptions could result in a different API. For example, if
all interface modes were assumed to use the same form of rate matching,
then a bitmask of interface modes supportting rate matching would
suffice.
For some better visibility into the process, the current rate matching
mode is exposed as part of the ethtool ksettings. For the moment, only
read access is supported. I'm not sure what userspace might want to
configure yet (disable it altogether, disable just one mode, specify the
mode to use, etc.). For the moment, since only pause-based rate
adaptation support is added in the next few commits, rate matching can
be disabled altogether by adjusting the advertisement.
802.3 calls this feature "rate adaptation" in clause 49 (10GBASE-R) and
"rate matching" in clause 61 (10PASS-TL and 2BASE-TS). Aquantia also calls
this feature "rate adaptation". I chose "rate matching" because it is
shorter, and because Russell doesn't think "adaptation" is correct in this
context.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check the return value of nla_nest_start(). When starting the entry
level nested attributes, if the tailroom of socket buffer is
insufficient to store the attribute header and payload, the return value
will be NULL.
There is, however, no real bug here since if the skb is full
nla_put_be16() will fail as well and we'll error out.
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Link: https://lore.kernel.org/r/20220921181716.1629541-1-floridsleeves@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
use tc_qdisc_stats_dump() in qdisc.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 3 functions that want access to the taprio_list:
taprio_dev_notifier(), taprio_destroy() and taprio_init() are all called
with the rtnl_mutex held, therefore implicitly serialized with respect
to each other. A spin lock serves no purpose.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20220921095632.1379251-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the missing clause for 256 bit keys in tls_set_device_offload(), and
the needed adjustments in tls_device_fallback.c.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the newly introduced cipher sizes structs instead of the repeated
switch cases churn.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce cipher sizes descriptor. It helps reducing the amount of code
duplications and repeated switch/cases that assigns the proper sizes
according to the cipher type.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A handful of awaited fixes here - revert of the FEC changes,
bluetooth fix, fixes for iwlwifi spew.
We added a warning in PHY/MDIO code which is triggering on
a couple of platforms in a false-positive-ish way. If we can't
iron that out over the week we'll drop it and re-add for 6.1.
I've added a new "follow up fixes" section for fixes to fixes
in 6.0-rcs but it may actually give the false impression that
those are problematic or that more testing time would have
caught them. So likely a one time thing.
Follow up fixes:
- nf_tables_addchain: fix nft_counters_enabled underflow
- ebtables: fix memory leak when blob is malformed
- nf_ct_ftp: fix deadlock when nat rewrite is needed
Current release - regressions:
- Revert "fec: Restart PPS after link state change"
- Revert "net: fec: Use a spinlock to guard `fep->ptp_clk_on`"
- Bluetooth: fix HCIGETDEVINFO regression
- wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2
- mptcp: fix fwd memory accounting on coalesce
- rwlock removal fall out:
- ipmr: always call ip{,6}_mr_forward() from RCU read-side
critical section
- ipv6: fix crash when IPv6 is administratively disabled
- tcp: read multiple skbs in tcp_read_skb()
- mdio_bus_phy_resume state warning fallout:
- eth: ravb: fix PHY state warning splat during system resume
- eth: sh_eth: fix PHY state warning splat during system resume
Current release - new code bugs:
- wifi: iwlwifi: don't spam logs with NSS>2 messages
- eth: mtk_eth_soc: enable XDP support just for MT7986 SoC
Previous releases - regressions:
- bonding: fix NULL deref in bond_rr_gen_slave_id
- wifi: iwlwifi: mark IWLMEI as broken
Previous releases - always broken:
- nf_conntrack helpers:
- irc: tighten matching on DCC message
- sip: fix ct_sip_walk_headers
- osf: fix possible bogus match in nf_osf_find()
- ipvlan: fix out-of-bound bugs caused by unset skb->mac_header
- core: fix flow symmetric hash
- bonding, team: unsync device addresses on ndo_stop
- phy: micrel: fix shared interrupt on LAN8814
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=wrep
-----END PGP SIGNATURE-----
Merge tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wifi, netfilter and can.
A handful of awaited fixes here - revert of the FEC changes, bluetooth
fix, fixes for iwlwifi spew.
We added a warning in PHY/MDIO code which is triggering on a couple of
platforms in a false-positive-ish way. If we can't iron that out over
the week we'll drop it and re-add for 6.1.
I've added a new "follow up fixes" section for fixes to fixes in
6.0-rcs but it may actually give the false impression that those are
problematic or that more testing time would have caught them. So
likely a one time thing.
Follow up fixes:
- nf_tables_addchain: fix nft_counters_enabled underflow
- ebtables: fix memory leak when blob is malformed
- nf_ct_ftp: fix deadlock when nat rewrite is needed
Current release - regressions:
- Revert "fec: Restart PPS after link state change" and the related
"net: fec: Use a spinlock to guard `fep->ptp_clk_on`"
- Bluetooth: fix HCIGETDEVINFO regression
- wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2
- mptcp: fix fwd memory accounting on coalesce
- rwlock removal fall out:
- ipmr: always call ip{,6}_mr_forward() from RCU read-side
critical section
- ipv6: fix crash when IPv6 is administratively disabled
- tcp: read multiple skbs in tcp_read_skb()
- mdio_bus_phy_resume state warning fallout:
- eth: ravb: fix PHY state warning splat during system resume
- eth: sh_eth: fix PHY state warning splat during system resume
Current release - new code bugs:
- wifi: iwlwifi: don't spam logs with NSS>2 messages
- eth: mtk_eth_soc: enable XDP support just for MT7986 SoC
Previous releases - regressions:
- bonding: fix NULL deref in bond_rr_gen_slave_id
- wifi: iwlwifi: mark IWLMEI as broken
Previous releases - always broken:
- nf_conntrack helpers:
- irc: tighten matching on DCC message
- sip: fix ct_sip_walk_headers
- osf: fix possible bogus match in nf_osf_find()
- ipvlan: fix out-of-bound bugs caused by unset skb->mac_header
- core: fix flow symmetric hash
- bonding, team: unsync device addresses on ndo_stop
- phy: micrel: fix shared interrupt on LAN8814"
* tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
selftests: forwarding: add shebang for sch_red.sh
bnxt: prevent skb UAF after handing over to PTP worker
net: marvell: Fix refcounting bugs in prestera_port_sfp_bind()
net: sched: fix possible refcount leak in tc_new_tfilter()
net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD
udp: Use WARN_ON_ONCE() in udp_read_skb()
selftests: bonding: cause oops in bond_rr_gen_slave_id
bonding: fix NULL deref in bond_rr_gen_slave_id
net: phy: micrel: fix shared interrupt on LAN8814
net/smc: Stop the CLC flow if no link to map buffers on
ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficient
net: atlantic: fix potential memory leak in aq_ndev_close()
can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported
can: gs_usb: gs_can_open(): fix race dev->can.state condition
can: flexcan: flexcan_mailbox_read() fix return value for drop = true
net: sh_eth: Fix PHY state warning splat during system resume
net: ravb: Fix PHY state warning splat during system resume
netfilter: nf_ct_ftp: fix deadlock when nat rewrite is needed
netfilter: ebtables: fix memory leak when blob is malformed
netfilter: nf_tables: fix percpu memory leak at nf_tables_addchain()
...
The flag for need_wakeup is not set for xsks with `XDP_SHARED_UMEM`
flag and of different queue ids and/or devices. They should inherit
the flag from the first socket buffer pool since no flags can be
specified once `XDP_SHARED_UMEM` is specified.
Fixes: b5aea28dca ("xsk: Add shared umem support between queue ids")
Signed-off-by: Jalal Mostafa <jalal.a.mostapha@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220921135701.10199-1-jalal.a.mostapha@gmail.com
tfilter_put need to be called to put the refount got by tp->ops->get to
avoid possible refcount leak when chain->tmplt_ops != NULL and
chain->tmplt_ops != tp->ops.
Fixes: 7d5509fa0d ("net: sched: extend proto ops with 'put' callback")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20220921092734.31700-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, SMC uses smc->sk.sk_{rcv|snd}buf to create buffers for
send buffer and RMB. And the values of buffer size are from tcp_{w|r}mem
in clcsock.
The buffer size from TCP socket doesn't fit SMC well. Generally, buffers
are usually larger than TCP for SMC-R/-D to get higher performance, for
they are different underlay devices and paths.
So this patch unbinds buffer size from TCP, and introduces two sysctl
knobs to tune them independently. Also, these knobs are per net
namespace and work for containers.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SMC-R tests the viability of link by sending out TEST_LINK LLC
messages over RoCE fabric when connections on link have been
idle for a time longer than keepalive interval (testlink time).
But using tcp_keepalive_time as testlink time maybe not quite
suitable because it is default no less than two hours[1], which
is too long for single link to find peer dead. The active host
will still use peer-dead link (QP) sending messages, and can't
find out until get IB_WC_RETRY_EXC_ERR error CQEs, which takes
more time than TEST_LINK timeout (SMC_LLC_WAIT_TIME) normally.
So this patch introduces a independent sysctl for SMC-R to set
link keepalive time, in order to detect link down in time. The
default value is 30 seconds.
[1] https://www.rfc-editor.org/rfc/rfc1122#page-101
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There might be a potential race between SMC-R buffer map and
link group termination.
smc_smcr_terminate_all() | smc_connect_rdma()
--------------------------------------------------------------
| smc_conn_create()
for links in smcibdev |
schedule links down |
| smc_buf_create()
| \- smcr_buf_map_usable_links()
| \- no usable links found,
| (rmb->mr = NULL)
|
| smc_clc_send_confirm()
| \- access conn->rmb_desc->mr[]->rkey
| (panic)
During reboot and IB device module remove, all links will be set
down and no usable links remain in link groups. In such situation
smcr_buf_map_usable_links() should return an error and stop the
CLC flow accessing to uninitialized mr.
Fixes: b9247544c1 ("net/smc: convert static link ID instances to support multiple links")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Link: https://lore.kernel.org/r/1663656189-32090-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Florian Westphal says:
====================
netfilter patches for net-next
Remove GPL license copypastry in uapi files, those have SPDX tags.
From Christophe Jaillet.
Remove unused variable in rpfilter, from Guillaume Nault.
Rework gc resched delay computation in conntrack, from Antoine Tenart.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: rpfilter: Remove unused variable 'ret'.
headers: Remove some left-over license text in include/uapi/linux/netfilter/
netfilter: conntrack: revisit the gc initial rescheduling bias
netfilter: conntrack: fix the gc rescheduling delay
====================
Link: https://lore.kernel.org/r/20220921095000.29569-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We've met the problem that when there is a vlan tag inside
GRE encapsulation, the match of num_of_vlans fails.
It is caused by the vlan tag inside GRE payload has been
counted into num_of_vlans, which is not expected.
One example packet is like this:
Ethernet II, Src: Broadcom_68:56:07 (00:10:18:68:56:07)
Dst: Broadcom_68:56:08 (00:10:18:68:56:08)
802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 100
Internet Protocol Version 4, Src: 192.168.1.4, Dst: 192.168.1.200
Generic Routing Encapsulation (Transparent Ethernet bridging)
Ethernet II, Src: Broadcom_68:58:07 (00:10:18:68:58:07)
Dst: Broadcom_68:58:08 (00:10:18:68:58:08)
802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 200
...
It should match the (num_of_vlans 1) rule, but it matches
the (num_of_vlans 2) rule.
The vlan tags inside the GRE or other tunnel encapsulated payload
should not be taken into num_of_vlans.
The fix is to stop counting the vlan number when the encapsulation
bit is set.
Fixes: 34951fcf26 ("flow_dissector: Add number of vlan tags dissector")
Signed-off-by: Qingqing Yang <qingqing.yang@broadcom.com>
Reviewed-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Link: https://lore.kernel.org/r/20220919074808.136640-1-qingqing.yang@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ISO events (CIS/BIS) shall only be relevant for connection with link
type of ISO_LINK, otherwise the controller is probably buggy or it is
the result of fuzzer tools such as syzkaller.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_debugfs_create_conn shall check if conn->debugfs has already been
created and don't attempt to overwrite it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
device_add shall not be called multiple times as stated in its
documentation:
'Do not call this routine or device_register() more than once for
any device structure'
Syzkaller reports a bug as follows [1]:
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:33!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[...]
Call Trace:
<TASK>
__list_add include/linux/list.h:69 [inline]
list_add_tail include/linux/list.h:102 [inline]
kobj_kset_join lib/kobject.c:164 [inline]
kobject_add_internal+0x18f/0x8f0 lib/kobject.c:214
kobject_add_varg lib/kobject.c:358 [inline]
kobject_add+0x150/0x1c0 lib/kobject.c:410
device_add+0x368/0x1e90 drivers/base/core.c:3452
hci_conn_add_sysfs+0x9b/0x1b0 net/bluetooth/hci_sysfs.c:53
hci_le_cis_estabilished_evt+0x57c/0xae0 net/bluetooth/hci_event.c:6799
hci_le_meta_evt+0x2b8/0x510 net/bluetooth/hci_event.c:7110
hci_event_func net/bluetooth/hci_event.c:7440 [inline]
hci_event_packet+0x63d/0xfd0 net/bluetooth/hci_event.c:7495
hci_rx_work+0xae7/0x1230 net/bluetooth/hci_core.c:4007
process_one_work+0x991/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
Link: https://syzkaller.appspot.com/bug?id=da3246e2d33afdb92d66bc166a0934c5b146404a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Hawkins Jiawei <yin31149@gmail.com>
Now, register_pernet_subsys() and register_netdevice_notifier() are both
after sock_register(). It can create PF_PACKET socket and process socket
once sock_register() successfully. It is possible PF_PACKET socket is
creating but register_pernet_subsys() and register_netdevice_notifier()
are not registered yet. Thus net->packet.sklist_lock and net->packet.sklist
will be accessed without initialization that is done in packet_net_init().
Although this is a low probability scenario.
Move register_pernet_subsys() and register_netdevice_notifier() to the
front in packet_init(). Correspondingly, adjust the unregister process
in packet_exit().
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return value directly from pskb_trim_rcsum() instead of
getting value from redundant variable err.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 91a178258a ("netfilter: rpfilter: Convert
rpfilter_lookup_reverse to new dev helper") removed the need for the
'ret' variable. This went unnoticed because of the __maybe_unused
annotation.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
The previous commit changed the way the rescheduling delay is computed
which has a side effect: the bias is now represented as much as the
other entries in the rescheduling delay which makes the logic to kick in
only with very large sets, as the initial interval is very large
(INT_MAX).
Revisit the GC initial bias to allow more frequent GC for smaller sets
while still avoiding wakeups when a machine is mostly idle. We're moving
from a large initial value to pretending we have 100 entries expiring at
the upper bound. This way only a few entries having a small timeout
won't impact much the rescheduling delay and non-idle machines will have
enough entries to lower the delay when needed. This also improves
readability as the initial bias is now linked to what is computed
instead of being an arbitrary large value.
Fixes: 2cfadb761d ("netfilter: conntrack: revisit gc autotuning")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Commit 2cfadb761d ("netfilter: conntrack: revisit gc autotuning")
changed the eviction rescheduling to the use average expiry of scanned
entries (within 1-60s) by doing:
for (...) {
expires = clamp(nf_ct_expires(tmp), ...);
next_run += expires;
next_run /= 2;
}
The issue is the above will make the average ('next_run' here) more
dependent on the last expiration values than the firsts (for sets > 2).
Depending on the expiration values used to compute the average, the
result can be quite different than what's expected. To fix this we can
do the following:
for (...) {
expires = clamp(nf_ct_expires(tmp), ...);
next_run += (expires - next_run) / ++count;
}
Fixes: 2cfadb761d ("netfilter: conntrack: revisit gc autotuning")
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
use tc_cls_stats_dump() in filter.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use zeroing allocator rather than allocator followed by memset with 0
Generated by: scripts/coccinelle/api/alloc/zalloc-simple.cocci
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We can't use ct->lock, this is already used by the seqadj internals.
When using ftp helper + nat, seqadj will attempt to acquire ct->lock
again.
Revert back to a global lock for now.
Fixes: c783a29c7e ("netfilter: nf_ct_ftp: prefer skb_linearize")
Reported-by: Bruno de Paula Larini <bruno.larini@riosoft.com.br>
Signed-off-by: Florian Westphal <fw@strlen.de>
The bug fix was incomplete, it "replaced" crash with a memory leak.
The old code had an assignment to "ret" embedded into the conditional,
restore this.
Fixes: 7997eff828 ("netfilter: ebtables: reject blobs that don't provide all entry points")
Reported-and-tested-by: syzbot+a24c5252f3e3ab733464@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
It seems to me that percpu memory for chain stats started leaking since
commit 3bc158f8d0 ("netfilter: nf_tables: map basechain priority to
hardware priority") when nft_chain_offload_priority() returned an error.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 3bc158f8d0 ("netfilter: nf_tables: map basechain priority to hardware priority")
Signed-off-by: Florian Westphal <fw@strlen.de>
syzbot is reporting underflow of nft_counters_enabled counter at
nf_tables_addchain() [1], for commit 43eb8949cf ("netfilter:
nf_tables: do not leave chain stats enabled on error") missed that
nf_tables_chain_destroy() after nft_basechain_init() in the error path of
nf_tables_addchain() decrements the counter because nft_basechain_init()
makes nft_is_base_chain() return true by setting NFT_CHAIN_BASE flag.
Increment the counter immediately after returning from
nft_basechain_init().
Link: https://syzkaller.appspot.com/bug?extid=b5d82a651b71cd8a75ab [1]
Reported-by: syzbot <syzbot+b5d82a651b71cd8a75ab@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+b5d82a651b71cd8a75ab@syzkaller.appspotmail.com>
Fixes: 43eb8949cf ("netfilter: nf_tables: do not leave chain stats enabled on error")
Signed-off-by: Florian Westphal <fw@strlen.de>
We're seeing the following new warnings on netdev/build_32bit and
netdev/build_allmodconfig_warn CI jobs:
../net/core/filter.c:8608:1: warning: symbol
'nf_conn_btf_access_lock' was not declared. Should it be static?
../net/core/filter.c:8611:5: warning: symbol 'nfct_bsa' was not
declared. Should it be static?
Fix by ensuring extern declaration is present while compiling filter.o.
Fixes: 864b656f82 ("bpf: Add support for writing to nf_conn:mark")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/2bd2e0283df36d8a4119605878edb1838d144174.1663683114.git.dxu@dxuuu.xyz
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
It makes little sense to ask if networking namespace or net device refcount
tracking shall be enabled for debug kernel builds without network support.
This is similar to the commit eb0b39efb7 ("net: CONFIG_DEBUG_NET depends
on CONFIG_NET").
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220915124256.32512-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The WARN_ON_ONCE() checks introduced in commit 13511704f8 ("net:
taprio offload: enforce qdisc to netdev queue mapping") take a small
toll on performance, but otherwise, the conditions are never expected to
happen. Replace them with comments, such that the information is still
conveyed to developers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stop contributing to the proverbial user unfriendliness of tc, and tell
the user what is wrong wherever possible.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 13511704f8 ("net: taprio offload: enforce qdisc to netdev
queue mapping"), taprio_dequeue_soft() and taprio_peek_soft() are de
facto the only implementations for Qdisc_ops :: dequeue and Qdisc_ops ::
peek that taprio provides.
This is because in full offload mode, __dev_queue_xmit() will select a
txq->qdisc which is never root taprio qdisc. So if nothing is enqueued
in the root qdisc, it will never be run and nothing will get dequeued
from it.
Therefore, we can remove the private indirection from taprio, and always
point Qdisc_ops :: dequeue to taprio_dequeue_soft (now simply named
taprio_dequeue) and Qdisc_ops :: peek to taprio_peek_soft (now simply
named taprio_peek).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 13511704f8 ("net: taprio offload: enforce qdisc to netdev
queue mapping"), __dev_queue_xmit() will select a txq->qdisc for the
full offload case of taprio which isn't the root taprio qdisc, so
qdisc enqueues will never pass through taprio_enqueue().
That commit already introduced one safety precaution check for
FULL_OFFLOAD_IS_ENABLED(); a second one is really not needed, so
simplify the conditional for entering into the GSO segmentation logic.
Also reword the comment a little, to appear more natural after the code
change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sparse complains that taprio_destroy() dereferences q->oper_sched and
q->admin_sched without rcu_dereference(), since they are marked as __rcu
in the taprio private structure.
1671:28: warning: incorrect type in argument 1 (different address spaces)
1671:28: expected struct callback_head *head
1671:28: got struct callback_head [noderef] __rcu *
1674:28: warning: incorrect type in argument 1 (different address spaces)
1674:28: expected struct callback_head *head
1674:28: got struct callback_head [noderef] __rcu *
To silence that build warning, do actually use rtnl_dereference(), since
we know the rtnl_mutex is held at the time of q->destroy().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the writer-side lock is taken here, we do not need to open an RCU
read-side critical section, instead we can use rtnl_dereference() to
tell lockdep we are serialized with concurrent writes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The locking in taprio_offload_config_changed() is wrong (but also
inconsequentially so). The current_entry_lock does not serialize changes
to the admin and oper schedules, only to the current entry. In fact, the
rtnl_mutex does that, and that is taken at the time when taprio_change()
is called.
Replace the rcu_dereference_protected() method with the proper RCU
annotation, and drop the unnecessary spin lock.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
taprio can only operate as root qdisc, and to that end, there exists the
following check in taprio_init(), just as in mqprio:
if (sch->parent != TC_H_ROOT)
return -EOPNOTSUPP;
And indeed, when we try to attach taprio to an mqprio child, it fails as
expected:
$ tc qdisc add dev swp0 root handle 1: mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
$ tc qdisc replace dev swp0 parent 1:2 taprio num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \
flags 0x0 clockid CLOCK_TAI
Error: sch_taprio: Can only be attached as root qdisc.
(extack message added by me)
But when we try to attach a taprio child to a taprio root qdisc,
surprisingly it doesn't fail:
$ tc qdisc replace dev swp0 root handle 1: taprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \
flags 0x0 clockid CLOCK_TAI
$ tc qdisc replace dev swp0 parent 1:2 taprio num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \
flags 0x0 clockid CLOCK_TAI
This is because tc_modify_qdisc() behaves differently when mqprio is
root, vs when taprio is root.
In the mqprio case, it finds the parent qdisc through
p = qdisc_lookup(dev, TC_H_MAJ(clid)), and then the child qdisc through
q = qdisc_leaf(p, clid). This leaf qdisc q has handle 0, so it is
ignored according to the comment right below ("It may be default qdisc,
ignore it"). As a result, tc_modify_qdisc() goes through the
qdisc_create() code path, and this gives taprio_init() a chance to check
for sch_parent != TC_H_ROOT and error out.
Whereas in the taprio case, the returned q = qdisc_leaf(p, clid) is
different. It is not the default qdisc created for each netdev queue
(both taprio and mqprio call qdisc_create_dflt() and keep them in
a private q->qdiscs[], or priv->qdiscs[], respectively). Instead, taprio
makes qdisc_leaf() return the _root_ qdisc, aka itself.
When taprio does that, tc_modify_qdisc() goes through the qdisc_change()
code path, because the qdisc layer never finds out about the child qdisc
of the root. And through the ->change() ops, taprio has no reason to
check whether its parent is root or not, just through ->init(), which is
not called.
The problem is the taprio_leaf() implementation. Even though code wise,
it does the exact same thing as mqprio_leaf() which it is copied from,
it works with different input data. This is because mqprio does not
attach itself (the root) to each device TX queue, but one of the default
qdiscs from its private array.
In fact, since commit 13511704f8 ("net: taprio offload: enforce qdisc
to netdev queue mapping"), taprio does this too, but just for the full
offload case. So if we tried to attach a taprio child to a fully
offloaded taprio root qdisc, it would properly fail too; just not to a
software root taprio.
To fix the problem, stop looking at the Qdisc that's attached to the TX
queue, and instead, always return the default qdiscs that we've
allocated (and to which we privately enqueue and dequeue, in software
scheduling mode).
Since Qdisc_class_ops :: leaf is only called from tc_modify_qdisc(),
the risk of unforeseen side effects introduced by this change is
minimal.
Fixes: 5a781ccbd1 ("tc: Add support for configuring the taprio scheduler")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In an incredibly strange API design decision, qdisc->destroy() gets
called even if qdisc->init() never succeeded, not exclusively since
commit 87b60cfacf ("net_sched: fix error recovery at qdisc creation"),
but apparently also earlier (in the case of qdisc_create_dflt()).
The taprio qdisc does not fully acknowledge this when it attempts full
offload, because it starts off with q->flags = TAPRIO_FLAGS_INVALID in
taprio_init(), then it replaces q->flags with TCA_TAPRIO_ATTR_FLAGS
parsed from netlink (in taprio_change(), tail called from taprio_init()).
But in taprio_destroy(), we call taprio_disable_offload(), and this
determines what to do based on FULL_OFFLOAD_IS_ENABLED(q->flags).
But looking at the implementation of FULL_OFFLOAD_IS_ENABLED()
(a bitwise check of bit 1 in q->flags), it is invalid to call this macro
on q->flags when it contains TAPRIO_FLAGS_INVALID, because that is set
to U32_MAX, and therefore FULL_OFFLOAD_IS_ENABLED() will return true on
an invalid set of flags.
As a result, it is possible to crash the kernel if user space forces an
error between setting q->flags = TAPRIO_FLAGS_INVALID, and the calling
of taprio_enable_offload(). This is because drivers do not expect the
offload to be disabled when it was never enabled.
The error that we force here is to attach taprio as a non-root qdisc,
but instead as child of an mqprio root qdisc:
$ tc qdisc add dev swp0 root handle 1: \
mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
$ tc qdisc replace dev swp0 parent 1:1 \
taprio num_tc 8 map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \
sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \
flags 0x0 clockid CLOCK_TAI
Unable to handle kernel paging request at virtual address fffffffffffffff8
[fffffffffffffff8] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Call trace:
taprio_dump+0x27c/0x310
vsc9959_port_setup_tc+0x1f4/0x460
felix_port_setup_tc+0x24/0x3c
dsa_slave_setup_tc+0x54/0x27c
taprio_disable_offload.isra.0+0x58/0xe0
taprio_destroy+0x80/0x104
qdisc_create+0x240/0x470
tc_modify_qdisc+0x1fc/0x6b0
rtnetlink_rcv_msg+0x12c/0x390
netlink_rcv_skb+0x5c/0x130
rtnetlink_rcv+0x1c/0x2c
Fix this by keeping track of the operations we made, and undo the
offload only if we actually did it.
I've added "bool offloaded" inside a 4 byte hole between "int clockid"
and "atomic64_t picos_per_byte". Now the first cache line looks like
below:
$ pahole -C taprio_sched net/sched/sch_taprio.o
struct taprio_sched {
struct Qdisc * * qdiscs; /* 0 8 */
struct Qdisc * root; /* 8 8 */
u32 flags; /* 16 4 */
enum tk_offsets tk_offset; /* 20 4 */
int clockid; /* 24 4 */
bool offloaded; /* 28 1 */
/* XXX 3 bytes hole, try to pack */
atomic64_t picos_per_byte; /* 32 0 */
/* XXX 8 bytes hole, try to pack */
spinlock_t current_entry_lock; /* 40 0 */
/* XXX 8 bytes hole, try to pack */
struct sched_entry * current_entry; /* 48 8 */
struct sched_gate_list * oper_sched; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
Fixes: 9c66d15646 ("taprio: Add support for hardware offloading")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The global 'raw_v6_hashinfo' variable can be accessed even when IPv6 is
administratively disabled via the 'ipv6.disable=1' kernel command line
option, leading to a crash [1].
Fix by restoring the original behavior and always initializing the
variable, regardless of IPv6 support being administratively disabled or
not.
[1]
BUG: unable to handle page fault for address: ffffffffffffffc8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 173e18067 P4D 173e18067 PUD 173e1a067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 3 PID: 271 Comm: ss Not tainted 6.0.0-rc4-custom-00136-g0727a9a5fbc1 #1396
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:raw_diag_dump+0x310/0x7f0
[...]
Call Trace:
<TASK>
__inet_diag_dump+0x10f/0x2e0
netlink_dump+0x575/0xfd0
__netlink_dump_start+0x67b/0x940
inet_diag_handler_cmd+0x273/0x2d0
sock_diag_rcv_msg+0x317/0x440
netlink_rcv_skb+0x15e/0x430
sock_diag_rcv+0x2b/0x40
netlink_unicast+0x53b/0x800
netlink_sendmsg+0x945/0xe60
____sys_sendmsg+0x747/0x960
___sys_sendmsg+0x13a/0x1e0
__sys_sendmsg+0x118/0x1e0
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 0daf07e527 ("raw: convert raw sockets to RCU")
Reported-by: Roberto Ricci <rroberto2r@gmail.com>
Tested-by: Roberto Ricci <rroberto2r@gmail.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220916084821.229287-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The more sockets we have in the hash table, the longer we spend looking
up the socket. While running a number of small workloads on the same
host, they penalise each other and cause performance degradation.
The root cause might be a single workload that consumes much more
resources than the others. It often happens on a cloud service where
different workloads share the same computing resource.
On EC2 c5.24xlarge instance (196 GiB memory and 524288 (1Mi / 2) ehash
entries), after running iperf3 in different netns, creating 24Mi sockets
without data transfer in the root netns causes about 10% performance
regression for the iperf3's connection.
thash_entries sockets length Gbps
524288 1 1 50.7
24Mi 48 45.1
It is basically related to the length of the list of each hash bucket.
For testing purposes to see how performance drops along the length,
I set 131072 (1Mi / 8) to thash_entries, and here's the result.
thash_entries sockets length Gbps
131072 1 1 50.7
1Mi 8 49.9
2Mi 16 48.9
4Mi 32 47.3
8Mi 64 44.6
16Mi 128 40.6
24Mi 192 36.3
32Mi 256 32.5
40Mi 320 27.0
48Mi 384 25.0
To resolve the socket lookup degradation, we introduce an optional
per-netns hash table for TCP, but it's just ehash, and we still share
the global bhash, bhash2 and lhash2.
With a smaller ehash, we can look up non-listener sockets faster and
isolate such noisy neighbours. In addition, we can reduce lock contention.
We can control the ehash size by a new sysctl knob. However, depending
on workloads, it will require very sensitive tuning, so we disable the
feature by default (net.ipv4.tcp_child_ehash_entries == 0). Moreover,
we can fall back to using the global ehash in case we fail to allocate
enough memory for a new ehash. The maximum size is 16Mi, which is large
enough that even if we have 48Mi sockets, the average list length is 3,
and regression would be less than 1%.
We can check the current ehash size by another read-only sysctl knob,
net.ipv4.tcp_ehash_entries. A negative value means the netns shares
the global ehash (per-netns ehash is disabled or failed to allocate
memory).
# dmesg | cut -d ' ' -f 5- | grep "established hash"
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc hugepage)
# sysctl net.ipv4.tcp_ehash_entries
net.ipv4.tcp_ehash_entries = 524288 # can be changed by thash_entries
# sysctl net.ipv4.tcp_child_ehash_entries
net.ipv4.tcp_child_ehash_entries = 0 # disabled by default
# ip netns add test1
# ip netns exec test1 sysctl net.ipv4.tcp_ehash_entries
net.ipv4.tcp_ehash_entries = -524288 # share the global ehash
# sysctl -w net.ipv4.tcp_child_ehash_entries=100
net.ipv4.tcp_child_ehash_entries = 100
# ip netns add test2
# ip netns exec test2 sysctl net.ipv4.tcp_ehash_entries
net.ipv4.tcp_ehash_entries = 128 # own a per-netns ehash with 2^n buckets
When more than two processes in the same netns create per-netns ehash
concurrently with different sizes, we need to guarantee the size in
one of the following ways:
1) Share the global ehash and create per-netns ehash
First, unshare() with tcp_child_ehash_entries==0. It creates dedicated
netns sysctl knobs where we can safely change tcp_child_ehash_entries
and clone()/unshare() to create a per-netns ehash.
2) Control write on sysctl by BPF
We can use BPF_PROG_TYPE_CGROUP_SYSCTL to allow/deny read/write on
sysctl knobs.
Note that the global ehash allocated at the boot time is spread over
available NUMA nodes, but inet_pernet_hashinfo_alloc() will allocate
pages for each per-netns ehash depending on the current process's NUMA
policy. By default, the allocation is done in the local node only, so
the per-netns hash table could fully reside on a random node. Thus,
depending on the NUMA policy the netns is created with and the CPU the
current thread is running on, we could see some performance differences
for highly optimised networking applications.
Note also that the default values of two sysctl knobs depend on the ehash
size and should be tuned carefully:
tcp_max_tw_buckets : tcp_child_ehash_entries / 2
tcp_max_syn_backlog : max(128, tcp_child_ehash_entries / 128)
As a bonus, we can dismantle netns faster. Currently, while destroying
netns, we call inet_twsk_purge(), which walks through the global ehash.
It can be potentially big because it can have many sockets other than
TIME_WAIT in all netns. Splitting ehash changes that situation, where
it's only necessary for inet_twsk_purge() to clean up TIME_WAIT sockets
in each netns.
With regard to this, we do not free the per-netns ehash in inet_twsk_kill()
to avoid UAF while iterating the per-netns ehash in inet_twsk_purge().
Instead, we do it in tcp_sk_exit_batch() after calling tcp_twsk_purge() to
keep it protocol-family-independent.
In the future, we could optimise ehash lookup/iteration further by removing
netns comparison for the per-netns ehash.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While destroying netns, we call inet_twsk_purge() in tcp_sk_exit_batch()
and tcpv6_net_exit_batch() for AF_INET and AF_INET6. These commands
trigger the kernel to walk through the potentially big ehash twice even
though the netns has no TIME_WAIT sockets.
# ip netns add test
# ip netns del test
or
# unshare -n /bin/true >/dev/null
When tw_refcount is 1, we need not call inet_twsk_purge() at least
for the net. We can save such unneeded iterations if all netns in
net_exit_list have no TIME_WAIT sockets. This change eliminates
the tax by the additional unshare() described in the next patch to
guarantee the per-netns ehash size.
Tested:
# mount -t debugfs none /sys/kernel/debug/
# echo cleanup_net > /sys/kernel/debug/tracing/set_ftrace_filter
# echo inet_twsk_purge >> /sys/kernel/debug/tracing/set_ftrace_filter
# echo function > /sys/kernel/debug/tracing/current_tracer
# cat ./add_del_unshare.sh
for i in `seq 1 40`
do
(for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) &
done
wait;
# ./add_del_unshare.sh
Before the patch:
# cat /sys/kernel/debug/tracing/trace_pipe
kworker/u128:0-8 [031] ...1. 174.162765: cleanup_net <-process_one_work
kworker/u128:0-8 [031] ...1. 174.240796: inet_twsk_purge <-cleanup_net
kworker/u128:0-8 [032] ...1. 174.244759: inet_twsk_purge <-tcp_sk_exit_batch
kworker/u128:0-8 [034] ...1. 174.290861: cleanup_net <-process_one_work
kworker/u128:0-8 [039] ...1. 175.245027: inet_twsk_purge <-cleanup_net
kworker/u128:0-8 [046] ...1. 175.290541: inet_twsk_purge <-tcp_sk_exit_batch
kworker/u128:0-8 [037] ...1. 175.321046: cleanup_net <-process_one_work
kworker/u128:0-8 [024] ...1. 175.941633: inet_twsk_purge <-cleanup_net
kworker/u128:0-8 [025] ...1. 176.242539: inet_twsk_purge <-tcp_sk_exit_batch
After:
# cat /sys/kernel/debug/tracing/trace_pipe
kworker/u128:0-8 [038] ...1. 428.116174: cleanup_net <-process_one_work
kworker/u128:0-8 [038] ...1. 428.262532: cleanup_net <-process_one_work
kworker/u128:0-8 [030] ...1. 429.292645: cleanup_net <-process_one_work
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will soon introduce an optional per-netns ehash.
This means we cannot use tcp_hashinfo directly in most places.
Instead, access it via net->ipv4.tcp_death_row.hashinfo.
The access will be valid only while initialising tcp_hashinfo
itself and creating/destroying each netns.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will soon introduce an optional per-netns ehash.
This means we cannot use the global sk->sk_prot->h.hashinfo
to fetch a TCP hashinfo.
Instead, set NULL to sk->sk_prot->h.hashinfo for TCP and get
a proper hashinfo from net->ipv4.tcp_death_row.hashinfo.
Note that we need not use sk->sk_prot->h.hashinfo if DCCP is
disabled.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will soon introduce an optional per-netns ehash and access hash
tables via net->ipv4.tcp_death_row->hashinfo instead of &tcp_hashinfo
in most places.
It could harm the fast path because dereferences of two fields in net
and tcp_death_row might incur two extra cache line misses. To save one
dereference, let's place tcp_death_row back in netns_ipv4 and fetch
hashinfo via net->ipv4.tcp_death_row"."hashinfo.
Note tcp_death_row was initially placed in netns_ipv4, and commit
fbb8295248 ("tcp: allocate tcp_death_row outside of struct netns_ipv4")
changed it to a pointer so that we can fire TIME_WAIT timers after freeing
net. However, we don't do so after commit 04c494e68a ("Revert "tcp/dccp:
get rid of inet_twsk_purge()""), so we need not define tcp_death_row as a
pointer.
Also, we move refcount_dec_and_test(&tw_refcount) from tcp_sk_exit() to
tcp_sk_exit_batch() as a debug check.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds no functional change and cleans up some functions
that the following patches touch around so that we make them tidy
and easy to review/revert. The changes are
- Keep reverse christmas tree order
- Remove unnecessary init of port in inet_csk_find_open_port()
- Use req_to_sk() once in reqsk_queue_unlink()
- Use sock_net(sk) once in tcp_time_wait() and tcp_v[46]_connect()
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unlike with bridges, one can't add an interface to a bond and set it up
at the same time:
| # ip link set dummy0 down
| # ip link set dummy0 master bond0 up
| Error: Device can not be enslaved while up.
Of all drivers with ndo_add_slave callback, bond and team decline if
IFF_UP flag is set, vrf cycles the interface (i.e., sets it down and
immediately up again) and the others just don't care.
Support the common notion of setting the interface up after enslaving it
by sorting the operations accordingly.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220914150623.24152-1-phil@nwl.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot is still complaining uninit-value in tcp_recvmsg(), for
commit 1228b34c8d ("net: clear msg_get_inq in __sys_recvfrom() and
__copy_msghdr_from_user()") missed that __get_compat_msghdr() is called
instead of copy_msghdr_from_user() when MSG_CMSG_COMPAT is specified.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 1228b34c8d ("net: clear msg_get_inq in __sys_recvfrom() and __copy_msghdr_from_user()")
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/d06d0f7f-696c-83b4-b2d5-70b5f2730a37@I-love.SAKURA.ne.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These functions expect to be called from RCU read-side critical section,
but this only happens when invoked from the data path via
ip{,6}_mr_input(). They can also be invoked from process context in
response to user space adding a multicast route which resolves a cache
entry with queued packets [1][2].
Fix by adding missing rcu_read_lock() / rcu_read_unlock() in these call
paths.
[1]
WARNING: suspicious RCU usage
6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387 Not tainted
-----------------------------
net/ipv4/ipmr.c:84 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by smcrouted/246:
#0: ffffffff862389b0 (rtnl_mutex){+.+.}-{3:3}, at: ip_mroute_setsockopt+0x11c/0x1420
stack backtrace:
CPU: 0 PID: 246 Comm: smcrouted Not tainted 6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x91/0xb9
vif_dev_read+0xbf/0xd0
ipmr_queue_xmit+0x135/0x1ab0
ip_mr_forward+0xe7b/0x13d0
ipmr_mfc_add+0x1a06/0x2ad0
ip_mroute_setsockopt+0x5c1/0x1420
do_ip_setsockopt+0x23d/0x37f0
ip_setsockopt+0x56/0x80
raw_setsockopt+0x219/0x290
__sys_setsockopt+0x236/0x4d0
__x64_sys_setsockopt+0xbe/0x160
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[2]
WARNING: suspicious RCU usage
6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387 Not tainted
-----------------------------
net/ipv6/ip6mr.c:69 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by smcrouted/246:
#0: ffffffff862389b0 (rtnl_mutex){+.+.}-{3:3}, at: ip6_mroute_setsockopt+0x6b9/0x2630
stack backtrace:
CPU: 1 PID: 246 Comm: smcrouted Not tainted 6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x91/0xb9
vif_dev_read+0xbf/0xd0
ip6mr_forward2.isra.0+0xc9/0x1160
ip6_mr_forward+0xef0/0x13f0
ip6mr_mfc_add+0x1ff2/0x31f0
ip6_mroute_setsockopt+0x1825/0x2630
do_ipv6_setsockopt+0x462/0x4440
ipv6_setsockopt+0x105/0x140
rawv6_setsockopt+0xd8/0x690
__sys_setsockopt+0x236/0x4d0
__x64_sys_setsockopt+0xbe/0x160
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: ebc3197963 ("ipmr: add rcu protection over (struct vif_device)->dev")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before we switched to ->read_skb(), ->read_sock() was passed with
desc.count=1, which technically indicates we only read one skb per
->sk_data_ready() call. However, for TCP, this is not true.
TCP at least has sk_rcvlowat which intentionally holds skb's in
receive queue until this watermark is reached. This means when
->sk_data_ready() is invoked there could be multiple skb's in the
queue, therefore we have to read multiple skbs in tcp_read_skb()
instead of one.
Fixes: 965b57b469 ("net: Introduce a new proto_ops ->read_skb()")
Reported-by: Peilin Ye <peilin.ye@bytedance.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20220912173553.235838-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The NEXT-C-SID mechanism described in [1] offers the possibility of
encoding several SRv6 segments within a single 128 bit SID address. Such
a SID address is called a Compressed SID (C-SID) container. In this way,
the length of the SID List can be drastically reduced.
A SID instantiated with the NEXT-C-SID flavor considers an IPv6 address
logically structured in three main blocks: i) Locator-Block; ii)
Locator-Node Function; iii) Argument.
C-SID container
+------------------------------------------------------------------+
| Locator-Block |Loc-Node| Argument |
| |Function| |
+------------------------------------------------------------------+
<--------- B -----------> <- NF -> <------------- A --------------->
(i) The Locator-Block can be any IPv6 prefix available to the provider;
(ii) The Locator-Node Function represents the node and the function to
be triggered when a packet is received on the node;
(iii) The Argument carries the remaining C-SIDs in the current C-SID
container.
The NEXT-C-SID mechanism relies on the "flavors" framework defined in
[2]. The flavors represent additional operations that can modify or
extend a subset of the existing behaviors.
This patch introduces the support for flavors in SRv6 End behavior
implementing the NEXT-C-SID one. An SRv6 End behavior with NEXT-C-SID
flavor works as an End behavior but it is capable of processing the
compressed SID List encoded in C-SID containers.
An SRv6 End behavior with NEXT-C-SID flavor can be configured to support
user-provided Locator-Block and Locator-Node Function lengths. In this
implementation, such lengths must be evenly divisible by 8 (i.e. must be
byte-aligned), otherwise the kernel informs the user about invalid
values with a meaningful error code and message through netlink_ext_ack.
If Locator-Block and/or Locator-Node Function lengths are not provided
by the user during configuration of an SRv6 End behavior instance with
NEXT-C-SID flavor, the kernel will choose their default values i.e.,
32-bit Locator-Block and 16-bit Locator-Node Function.
[1] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression
[2] - https://datatracker.ietf.org/doc/html/rfc8986
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
An SRv6 behavior instance can be set up using mandatory and/or optional
attributes.
In the setup phase, each supplied attribute is parsed and processed. If
the parsing operation fails, the creation of the behavior instance stops
and an error number/code is reported to the user. In many cases, it is
challenging for the user to figure out exactly what happened by relying
only on the error code.
For this reason, we add the support for netlink_ext_ack in parsing SRv6
behavior attributes. In this way, when an SRv6 behavior attribute is
parsed and an error occurs, the kernel can send a message to the
userspace describing the error through a meaningful text message in
addition to the classic error code.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the cited commit, the function ipv6_gro_receive was accidentally
changed to use skb_gro_header_slow, without attempting the fast path.
Fix it.
Fixes: 35ffb66547 ("net: gro: skb_gro_header helper function")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Link: https://lore.kernel.org/r/20220911184835.GA105063@debian
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are 2 ways in which a DSA user port may become handled by 2 CPU
ports in a LAG:
(1) its current DSA master joins a LAG
ip link del bond0 && ip link add bond0 type bond mode 802.3ad
ip link set eno2 master bond0
When this happens, all user ports with "eno2" as DSA master get
automatically migrated to "bond0" as DSA master.
(2) it is explicitly configured as such by the user
# Before, the DSA master was eno3
ip link set swp0 type dsa master bond0
The design of this configuration is that the LAG device dynamically
becomes a DSA master through dsa_master_setup() when the first physical
DSA master becomes a LAG slave, and stops being so through
dsa_master_teardown() when the last physical DSA master leaves.
A LAG interface is considered as a valid DSA master only if it contains
existing DSA masters, and no other lower interfaces. Therefore, we
mainly rely on method (1) to enter this configuration.
Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when
it becomes a standalone DSA master again. But the LAG master also has a
dev->dsa_ptr, and this is actually duplicated from one of the physical
LAG slaves, and therefore needs to be balanced when LAG slaves come and
go.
To the switch driver, putting DSA masters in a LAG is seen as putting
their associated CPU ports in a LAG.
We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG,
by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Drivers could refuse to offload a LAG configuration for a variety of
reasons, mainly having to do with its TX type. Additionally, since DSA
masters may now also be LAG interfaces, and this will translate into a
call to port_lag_join on the CPU ports, there may be extra restrictions
there. Propagate the netlink extack to this DSA method in order for
drivers to give a meaningful error message back to the user.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These don't work (print a harmless error about the operation failing)
and make little sense to have anyway, because when a LAG DSA master goes
away, we will introduce logic to move our CPU port back to the first
physical DSA master. So suppress these device links in preparation for
adding support for LAG DSA masters.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to the discussion about tracking the admin/oper state of LAG DSA
masters, we have the problem here that struct dsa_port *cpu_dp caches a
single pair of orig_ethtool_ops and netdev_ops pointers.
So if we call dsa_master_setup(bond0, cpu_dp) where cpu_dp is also the
dev->dsa_ptr of one of the physical DSA masters, we'd effectively
overwrite what we cached from that physical netdev with what replaced
from the bonding interface.
We don't need DSA ethtool stats on the bonding interface when used as
DSA master, it's good enough to have them just on the physical DSA
masters, so suppress this logic.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We store information about the DSA master's state in
cpu_dp->master_admin_up and cpu_dp->master_oper_up, and this assumes a
bijective association between a CPU port and a DSA master.
However, when we have CPU ports in a LAG (and DSA masters in a LAG too),
the way in which we set up things is that the physical DSA masters still
have dev->dsa_ptr pointing to our cpu_dp, but the bonding/team device
itself also has its dev->dsa_ptr pointing towards one of the CPU port
structures (the first one).
So logically speaking, that first cpu_dp can't keep track of both the
physical master's admin/oper state, and of the bonding master's state.
This isn't even needed; the reason why we keep track of the DSA master's
state is to know when it is available for Ethernet-based register access.
For that use case, we don't even need LAG; we just need to decide upon
one of the physical DSA masters (if there is more than 1 available) and
use that.
This change suppresses dsa_tree_master_{admin,oper}_state_change() calls
on LAG DSA masters (which will be supported in a future change), to
allow the tracking of just physical DSA masters.
Link: https://lore.kernel.org/netdev/628cc94d.1c69fb81.15b0d.422d@mx.google.com/
Suggested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some DSA switches have multiple CPU ports, which can be used to improve
CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(),
sets up only the first one, leading to suboptimal use of hardware.
The desire is to not change the default configuration but to permit the
user to create a dynamic mapping between individual user ports and the
CPU port that they are served by, configurable through rtnetlink. It is
also intended to permit load balancing between CPU ports, and in that
case, the foreseen model is for the DSA master to be a bonding interface
whose lowers are the physical DSA masters.
To that end, we create a struct rtnl_link_ops for DSA user ports with
the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that
contains the ifindex of the newly desired DSA master.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is a desire to support for DSA masters in a LAG.
That configuration is intended to work by simply enslaving the master to
a bonding/team device. But the physical DSA master (the LAG slave) still
has a dev->dsa_ptr, and that cpu_dp still corresponds to the physical
CPU port.
However, we would like to be able to retrieve the LAG that's the upper
of the physical DSA master. In preparation for that, introduce a helper
called dsa_port_get_master() that replaces all occurrences of the
dp->cpu_dp->master pattern. The distinction between LAG and non-LAG will
be made later within the helper itself.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow to offload L2TPv3 filters by adding flow_rule_match_l2tpv3.
Drivers can extract L2TPv3 specific fields from now on.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for matching on L2TPv3 session ID.
Session ID can be specified only when ip proto was
set to IPPROTO_L2TP.
Example filter:
# tc filter add dev $PF1 ingress prio 1 protocol ip \
flower \
ip_proto l2tp \
l2tpv3_sid 1234 \
skip_sw \
action mirred egress redirect dev $VF1_PR
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow to dissect L2TPv3 specific field which is:
- session ID (32 bits)
L2TPv3 might be transported over IP or over UDP,
this implementation is only about L2TPv3 over IP.
IP protocol carries L2TPv3 when ip_proto is
IPPROTO_L2TP (115).
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All usages of the vport_ops struct have the .send field set to
dev_queue_xmit or internal_dev_recv. Since most usages are set to
dev_queue_xmit, the function hook should match the signature of
dev_queue_xmit.
The only call to vport_ops->send() is in net/openvswitch/vport.c and it
throws away the return value.
This mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20220913230739.228313-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- bump version strings, by Simon Wunderlich
- drop unused headers in trace.h, by Sven Eckelmann
- drop initialization of flexible ethtool_link_ksettings,
by Sven Eckelmann
- remove unused struct definitions, by Marek Lindner
-----BEGIN PGP SIGNATURE-----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=Fh8v
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20220916' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- drop unused headers in trace.h, by Sven Eckelmann
- drop initialization of flexible ethtool_link_ksettings,
by Sven Eckelmann
- remove unused struct definitions, by Marek Lindner
* tag 'batadv-next-pullrequest-20220916' of git://git.open-mesh.org/linux-merge:
batman-adv: remove unused struct definitions
batman-adv: Drop initialization of flexible ethtool_link_ksettings
batman-adv: Drop unused headers in trace.h
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20220916161454.1413154-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix hang up with small MTU hard-interface, by Shigeru Yoshida
-----BEGIN PGP SIGNATURE-----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=w5ul
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20220916' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- Fix hang up with small MTU hard-interface, by Shigeru Yoshida
* tag 'batadv-net-pullrequest-20220916' of git://git.open-mesh.org/linux-merge:
batman-adv: Fix hang up with small MTU hard-interface
====================
Link: https://lore.kernel.org/r/20220916160931.1412407-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot is reporting attempt to schedule hdev->cmd_work work from system_wq
WQ into hdev->workqueue WQ which is under draining operation [1], for
commit c8efcc2589 ("workqueue: allow chained queueing during
destruction") does not allow such operation.
The check introduced by commit 877afadad2 ("Bluetooth: When HCI work
queue is drained, only queue chained work") was incomplete.
Use hdev->workqueue WQ when queuing hdev->{cmd,ncmd}_timer works because
hci_{cmd,ncmd}_timeout() calls queue_work(hdev->workqueue). Also, protect
the queuing operation with RCU read lock in order to avoid calling
queue_delayed_work() after cancel_delayed_work() completed.
Link: https://syzkaller.appspot.com/bug?extid=243b7d89777f90f7613b [1]
Reported-by: syzbot <syzbot+243b7d89777f90f7613b@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 877afadad2 ("Bluetooth: When HCI work queue is drained, only queue chained work")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
syzbot is reporting cancel_delayed_work() without INIT_DELAYED_WORK() at
l2cap_chan_del() [1], for CONF_NOT_COMPLETE flag (which meant to prevent
l2cap_chan_del() from calling cancel_delayed_work()) is cleared by timer
which fires before l2cap_chan_del() is called by closing file descriptor
created by socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_L2CAP).
l2cap_bredr_sig_cmd(L2CAP_CONF_REQ) and l2cap_bredr_sig_cmd(L2CAP_CONF_RSP)
are calling l2cap_ertm_init(chan), and they call l2cap_chan_ready() (which
clears CONF_NOT_COMPLETE flag) only when l2cap_ertm_init(chan) succeeded.
l2cap_sock_init() does not call l2cap_ertm_init(chan), and it instead sets
CONF_NOT_COMPLETE flag by calling l2cap_chan_set_defaults(). However, when
connect() is requested, "command 0x0409 tx timeout" happens after 2 seconds
from connect() request, and CONF_NOT_COMPLETE flag is cleared after 4
seconds from connect() request, for l2cap_conn_start() from
l2cap_info_timeout() callback scheduled by
schedule_delayed_work(&conn->info_timer, L2CAP_INFO_TIMEOUT);
in l2cap_connect() is calling l2cap_chan_ready().
Fix this problem by initializing delayed works used by L2CAP_MODE_ERTM
mode as soon as l2cap_chan_create() allocates a channel, like I did in
commit be85972393 ("Bluetooth: initialize skb_queue_head at
l2cap_chan_create()").
Link: https://syzkaller.appspot.com/bug?extid=83672956c7aa6af698b3 [1]
Reported-by: syzbot <syzbot+83672956c7aa6af698b3@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmMi3OwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXafhCACHLzDn9otKPWe+w6Lt1RSuhKvhbuhO
XywQ4EBEUddOrqYarEuFiuWZMq1/PLGnkWVQotzElZR9HtkTUUetXgfsWHv39uo+
SqUK7P+DnuT9AvvUkk1ZoyVYxs8FnVWoPlcBli+zXZCjtg/XYn/2qPGJlaNPovLv
hzVokS/RVxlPIrQiNWVmkHyTb6LyLdLit802dtdaxKmQcUCgYVAiz+DwR0PwBEWs
e1K046RIfl5QejpkVq+pIXpTGu1C4m2bv1umPCts1OLtBGkHf7Dwu9HmgWPDwY91
0oJt/00NpQLgg77vnOJnv0M/TZE9cP9gp7zFh7b43qg0TpIzHhJJYJut
=UEkq
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.1-20220915' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
Sept. 15, 2022, 8:19 a.m. UTC
Hello Jakub, hello David,
this is a pull request of 23 patches for net-next/master.
the first 2 patches are by me and fix a typo in the rx-offload helper
and the flexcan driver.
Christophe JAILLET's patch cleans up the error handling in
rcar_canfd driver's probe function.
Kenneth Lee's patch converts the kvaser_usb driver from kcalloc() to
kzalloc().
Biju Das contributes 2 patches to the sja1000 driver which update the
DT bindings and support for the RZ/N1 SJA1000 CAN controller.
Jinpeng Cui provides 2 patches that remove redundant variables from
the sja1000 and kvaser_pciefd driver.
2 patches by John Whittington and me add hardware timestamp support to
the gs_usb driver.
Gustavo A. R. Silva's patch converts the etas_es58x driver to make use
of DECLARE_FLEX_ARRAY().
Krzysztof Kozlowski's patch cleans up the sja1000 DT bindings.
Dario Binacchi fixes his invalid email in the flexcan driver
documentation.
Ziyang Xuan contributes 2 patches that clean up the CAN RAW protocol.
Yang Yingliang's patch switches the flexcan driver to dev_err_probe().
The last 7 patches are by Oliver Hartkopp and add support for the next
generation of the CAN protocol: CAN with eXtended data Length (CAN XL).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Prevent tcp_read_skb() from flooding the syslog.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is uninit value bug in dgram_sendmsg function in
net/ieee802154/socket.c when the length of valid data pointed by the
msg->msg_name isn't verified.
We introducing a helper function ieee802154_sockaddr_check_size to
check namelen. First we check there is addr_type in ieee802154_addr_sa.
Then, we check namelen according to addr_type.
Also fixed in raw_bind, dgram_bind, dgram_connect.
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Delete the redundant word 'that'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like what was done with IFLA_PROMISCUITY, add IFLA_ALLMULTI to advertise
the allmulti counter.
The flag IFF_ALLMULTI is advertised only if it was directly set by a
userland app.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to change to switch to use lock_sock inside rfcomm_sk_state_change
the socket shutdown/release procedure can cause a deadlock:
rfcomm_sock_shutdown():
lock_sock();
__rfcomm_sock_close():
rfcomm_dlc_close():
__rfcomm_dlc_close():
rfcomm_dlc_lock();
rfcomm_sk_state_change():
lock_sock();
To fix this when the call __rfcomm_sock_close is now done without
holding the lock_sock since rfcomm_dlc_lock exists to protect
the dlc data there is no need to use lock_sock in that code path.
Link: https://lore.kernel.org/all/CAD+dNTsbuU4w+Y_P7o+VEN7BYCAbZuwZx2+tH+OTzCdcZF82YA@mail.gmail.com/
Fixes: b7ce436a5d ("Bluetooth: switch to lock_sock in RFCOMM")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that non-root users can configure MPTCP endpoints, account
the memory allocation to the user.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
GENL_ADMIN_PERM checks that the user has CAP_NET_ADMIN in the initial
namespace by calling netlink_capable(). Instead, use GENL_UNS_ADMIN_PERM
which uses netlink_ns_capable(). This checks that the caller has
CAP_NET_ADMIN in the current user namespace.
See also
commit 4a92602aa1 ("openvswitch: allow management from inside user namespaces")
which introduced this mechanism. See also
commit 5617c6cd6f ("nl80211: Allow privileged operations from user namespaces")
which introduced this for nl80211.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds a new bool variable 'do_check_data_fin' to replace the
original int variable 'copied' in __mptcp_push_pending(), check it to
determine whether to call __mptcp_check_send_data_fin().
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to mptcp_for_each_subflow(): this is clearer now that the _safe
version is used in multiple places.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Enable CAN_RAW sockets to read and write CAN XL frames analogue to the
CAN FD extension (new CAN_RAW_XL_FRAMES sockopt).
A CAN XL network interface is capable to handle Classical CAN, CAN FD and
CAN XL frames. When CAN_RAW_XL_FRAMES is enabled, the CAN_RAW socket checks
whether the addressed CAN network interface is capable to handle the
provided CAN frame.
In opposite to the fixed number of bytes for
- CAN frames (CAN_MTU = sizeof(struct can_frame))
- CAN FD frames (CANFD_MTU = sizeof(struct can_frame))
the number of bytes when reading/writing CAN XL frames depends on the
number of data bytes. For efficiency reasons the length of the struct
canxl_frame is truncated to the needed size for read/write operations.
This leads to a calculated size of CANXL_HDR_SIZE + canxl_frame::len which
is enforced on write() operations and guaranteed on read() operations.
NB: Valid length values are 1 .. 2048 (CANXL_MIN_DLEN .. CANXL_MAX_DLEN).
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-8-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- add new ETH_P_CANXL ethernet protocol type
- update skb checks for CAN XL
- add alloc_canxl_skb() which now needs a data length parameter
- introduce init_can_skb_reserve() to reduce code duplication
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-6-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
To simplify the testing in user space all struct canfd_frame's provided by
the CAN subsystem of the Linux kernel now have the CANFD_FDF flag set in
canfd_frame::flags.
NB: Handcrafted ETH_P_CANFD frames introduced via PF_PACKET socket might
not set this bit correctly. During the check for sufficient headroom in
PF_PACKET sk_buffs the uninitialized CAN sk_buff data structures are filled.
In the case of a CAN FD frame the CANFD_FDF flag is set accordingly.
As the CAN frame content is already zero initialized in alloc_canfd_skb()
the obsolete initialization of cf->flags in the CTU CAN FD driver has been
removed as it would overwrite the already set CANFD_FDF flag.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-4-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Replace open coded checks for sk_buffs containing Classical CAN and
CAN FD frame structures as a preparation for CAN XL support.
With the added length check the unintended processing of CAN XL frames
having the CANXL_XLF bit set can be suppressed even when the skb->len
fits to non CAN XL frames.
The CAN_RAW socket needs a rework to use these helpers. Therefore the
use of these helpers is postponed to the CAN_RAW CAN XL integration.
The J1939 protocol gets a check for Classical CAN frames too.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-2-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Address resolution will be paused during active scan to allow any
advertising reports reach the host. If LL privacy is enabled,
advertising will rely on the controller to generate new RPA.
If host is not using RPA, there is no need to stop advertising during
active scan because there is no need to generate RPA in the controller.
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
syzbot is again reporting attempt to cancel uninitialized work
at mgmt_index_removed() [1], for setting of HCI_MGMT flag from
mgmt_init_hdev() from hci_mgmt_cmd() from hci_sock_sendmsg() can
race with testing of HCI_MGMT flag from mgmt_index_removed() from
hci_sock_bind() due to lack of serialization via hci_dev_lock().
Since mgmt_init_hdev() is called with mgmt_chan_list_lock held, we can
safely split hci_dev_test_and_set_flag() into hci_dev_test_flag() and
hci_dev_set_flag(). Thus, in order to close this race, set HCI_MGMT flag
after INIT_DELAYED_WORK() completed.
This is a local fix based on mgmt_chan_list_lock. Lack of serialization
via hci_dev_lock() might be causing different race conditions somewhere
else. But a global fix based on hci_dev_lock() should deserve a future
patch.
Link: https://syzkaller.appspot.com/bug?extid=844c7bf1b1aa4119c5de
Reported-by: syzbot+844c7bf1b1aa4119c5de@syzkaller.appspotmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 3f2893d3c1 ("Bluetooth: don't try to cancel uninitialized works at mgmt_index_removed()")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Support direct writes to nf_conn:mark from TC and XDP prog types. This
is useful when applications want to store per-connection metadata. This
is also particularly useful for applications that run both bpf and
iptables/nftables because the latter can trivially access this metadata.
One example use case would be if a bpf prog is responsible for advanced
packet classification and iptables/nftables is later used for routing
due to pre-existing/legacy code.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/ebca06dea366e3e7e861c12f375a548cc4c61108.1662568410.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Returning a bpf_reg_type only makes sense in the context of a BPF_READ.
For writes, prefer to explicitly return 0 for clarity.
Note that is non-functional change as it just so happened that NOT_INIT
== 0.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/01772bc1455ae16600796ac78c6cc9fff34f95ff.1662568410.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Usually when a TCP/UDP connection is initiated, we can bind the socket
to a specific IP attached to an interface in a cgroup/connect hook.
But for pings, this is impossible, as the hook is not being called.
This adds the hook invocation to unprivileged ICMP ping (i.e. ping
sockets created with SOCK_DGRAM IPPROTO_ICMP(V6) as opposed to
SOCK_RAW. Logic is mirrored from UDP sockets where the hook is invoked
during pre_connect, after a check for suficiently sized addr_len.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Link: https://lore.kernel.org/r/5764914c252fad4cd134fb6664c6ede95f409412.1662682323.git.zhuyifei@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
__flow_hash_consistentify() wrongly swaps ipv4 addresses in few cases.
This function is indirectly used by __skb_get_hash_symmetric(), which is
used to fanout packets in AF_PACKET.
Intrusion detection systems may be impacted by this issue.
__flow_hash_consistentify() computes the addresses difference then swaps
them if the difference is negative. In few cases src - dst and dst - src
are both negative.
The following snippet mimics __flow_hash_consistentify():
```
#include <stdio.h>
#include <stdint.h>
int main(int argc, char** argv) {
int diffs_d, diffd_s;
uint32_t dst = 0xb225a8c0; /* 178.37.168.192 --> 192.168.37.178 */
uint32_t src = 0x3225a8c0; /* 50.37.168.192 --> 192.168.37.50 */
uint32_t dst2 = 0x3325a8c0; /* 51.37.168.192 --> 192.168.37.51 */
diffs_d = src - dst;
diffd_s = dst - src;
printf("src:%08x dst:%08x, diff(s-d)=%d(0x%x) diff(d-s)=%d(0x%x)\n",
src, dst, diffs_d, diffs_d, diffd_s, diffd_s);
diffs_d = src - dst2;
diffd_s = dst2 - src;
printf("src:%08x dst:%08x, diff(s-d)=%d(0x%x) diff(d-s)=%d(0x%x)\n",
src, dst2, diffs_d, diffs_d, diffd_s, diffd_s);
return 0;
}
```
Results:
src:3225a8c0 dst:b225a8c0, \
diff(s-d)=-2147483648(0x80000000) \
diff(d-s)=-2147483648(0x80000000)
src:3225a8c0 dst:3325a8c0, \
diff(s-d)=-16777216(0xff000000) \
diff(d-s)=16777216(0x1000000)
In the first case the addresses differences are always < 0, therefore
__flow_hash_consistentify() always swaps, thus dst->src and src->dst
packets have differents hashes.
Fixes: c3f8324188 ("net: Add full IPv6 addresses to flow_keys")
Signed-off-by: Ludovic Cintrat <ludovic.cintrat@gatewatcher.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
