Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding the size values '[current/total]' into progress bar, to show more
detailed progress of data reading.
Adding new ui_progress__init_size function to specify we want to display
the size.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908120510.22515-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding ui specific init function allowing to setup the progress bar
width based on current screen scales.
Adding TUI init function to get more grained update of the progress bar.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908120510.22515-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pave the way for further cleanups where linux/kernel.h may stop being
included in some header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qqxan6tfsl6qx3l0v3nwgjvk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cache.h header doesn't use any of the definitions in some of the
headers it includes, ditch them and fix the fallout, where files were
getting stuff they needed just because they were including it, sometimes
not using what it really exports at all.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-l6r2bmj8h1g3e01wr981on0n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. we want to tell the user about errors found during, for instance,
the ui_browser initialization, so that a call to ui__warning() appears
as a window waiting for a key to be pressed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ederrwizcl6mfz10vfobl5qq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can erase the progress bar after we're done with it, avoiding
things like:
-------------------------------------------------------------------
┌─Error:──────────────────────────────────────────────────────┐
│Can't annotate unmapped_area_topdown: │
│ │
│No vmlinux file with build id a826726b5ddacfab1f0bade868f1a79│
│was found in the path. │
│ │
│Note that annotation using /proc/kcore requires CAP_SYS_RAWIO│
┌Processin│ │──┐
│ │Please use: │ │
└─────────│ │──┘
│ perf buildid-cache -vu vmlinux │
│ │
│or: │
│ │
│ --vmlinux vmlinux │
│ │
│ │
│Press any key... │
└─────────────────────────────────────────────────────────────┘
Can't annotate unmapped_area_topdown:
-------------------------------------------------------------------
I.e. that finished progress bar behind the error window. It is not a
problem when we end up redrawing the whole screen, but its ugly when
we present such error windows, provide a TUI method so that code like
the above may avoid this situation, as will be done with the annotation
code in the next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qvktnojzwwe37pweging058t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To remove direct access to libslang functions, with the immediate goal
of implementing horizontal scrolling at the ui_browser level, but also
because we may at some point want to implement ui_browser with other UIs
in addition to the current libslang implementation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-437ineavoejzou727mr9bxpi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was inconvenient that perf cannot be quit with SIGINT during
processing samples on TUI especially for large data files.
This was because the first argument of SLang_init_tty(), abort_char,
being 0. The manual says it's the ascii value of the control character
that will be used to generate the interrupt signal [1]. Passing -1
means to use the default value (Ctrl-C).
However, after processing samples, Ctrl-C was used to in other cases as
well - like stepping back from annotate. So recover the original
behavior after processing.
[1] http://jedsoft.org/slang/doc/html/cslang-6.html#ss6.1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432904024-13170-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the slang objects building under build framework to be included in
the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2ofo1r00jl6i143qxcl9n2jr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf exits with some error it shows the error message with
ui__error() or ui__warning() and then calls ui__exit() during
exit_browser().
On TUI, it then shows a window titled "Fatal Error" to inform user a
last message which might be related with this condition. However it
sometimes contains no message and just annoyes users.
The usual case for this is running perf top as normal user. (And
/proc/sys/kernel/perf_event_paranoid being 1).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1421736050-5283-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The output will look like below. (I added an error into ui__init() for
the test).
$ perf report
perf: Segmentation fault
-------- backtrace --------
perf[0x503781]
/usr/lib/libc.so.6(+0x33b20)[0x7f1a14f04b20]
perf(ui__init+0xd5)[0x503645]
perf(setup_browser+0x97)[0x4ce4e7]
perf(cmd_report+0xcea)[0x4392ba]
perf[0x428493]
perf(main+0x60a)[0x427c0a]
/usr/lib/libc.so.6(__libc_start_main+0xf0)[0x7f1a14ef1040]
perf[0x427d29]
[0x0]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1419223455-4362-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes perf top TUI breaks display with concurrent help/input window
and pr_* messages since they're not protected by ui__lock.
You can check it by pressing (and not releasing) 'h' key on a "perf top
-vvv" TUI session.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1388036284-32342-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Each call to tui_progress__update() would forcibly refresh the entire
screen. This is somewhat inefficient and causes noticable flickering
during the startup of perf-report, especially on large/slow terminals.
It looks like the force-refresh in tui_progress__update() serves no
purpose other than to clear the screen so that the progress bar of a
previous operation does not subsume that of a subsequent operation. But
we can do just that in a much more efficient manner by clearing only the
region that a previous progress bar may have occupied before repainting
the new progress bar. Then the force-refresh could be removed with no
change in visuals.
This patch disables the slow force-refresh in tui_progress__update() and
instead calls SLsmg_fill_region() on the entire area that the progress
bar may occupy before repainting it. This change makes the startup of
perf-report much faster and appear much "smoother".
It turns out that this was a big bottleneck in the startup speed of
perf-report -- with this patch, perf-report starts up ~2x faster (1.1s
vs 0.55s) on my machines. (These numbers were measured by running "time
perf report" on an 8MB perf.data and pressing 'q' immediately.)
Signed-off-by: Patrick Palka <patrick@parcs.ath.cx>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1382747149-9716-1-git-send-email-patrick@parcs.ath.cx
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That will ease using a progress bar across multiple functions, like in
the upcoming patches that will present a progress bar when collapsing
histograms.
Based on a previous patch by Namhyung Kim.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cr7lq7ud9fj21bg7wvq27w1u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reserving 'struct ui_progress' to the per progress instances, not to the
particular set of operations used to implmenet a progress bar in the
current UI (GTK, TUI, etc).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zjqbfp9gx3yo45s0rp9uv42n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that the map browser shares the input routine with the hists
browser, there is no need for using any libnewt routine, so remove all
traces except for honouring NO_NEWT=1 on the makefile command line as an
indication that TUI support is not needed, in fact it just sets
NO_SLANG=1.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wae5o7xca9m52bj1re28jc5j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ui_helpline__vshow() will be used for pr_* functions.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1352911664-24620-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make ui_progress functions generic so that UI frontend code will add its
callbacks.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1352813436-14173-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current ui_progress functions are implemented for TUI only. So move the
file under the tui directory. This is needed for providing an UI-
agnostic wrapper.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1352813436-14173-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf defines both __used and __unused variables to use for marking
unused variables. The variable __used is defined to
__attribute__((__unused__)), which contradicts the kernel definition to
__attribute__((__used__)) for new gcc versions. On Android, __used is
also defined in system headers and this leads to warnings like: warning:
'__used__' attribute ignored
__unused is not defined in the kernel and is not a standard definition.
If __unused is included everywhere instead of __used, this leads to
conflicts with glibc headers, since glibc has a variables with this name
in its headers.
The best approach is to use __maybe_unused, the definition used in the
kernel for __attribute__((unused)). In this way there is only one
definition in perf sources (instead of 2 definitions that point to the
same thing: __used and __unused) and it works on both Linux and Android.
This patch simply replaces all instances of __used and __unused with
__maybe_unused.
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com
[ committer note: fixed up conflict with a116e05 in builtin-sched.c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Override hpp->color functions for TUI. Because line coloring is done
outside of the function, it just sets the percent value and pass it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1346640790-17197-5-git-send-email-namhyung@kernel.org
[ committer note: Keep previous layout by showing the overhead at column 1 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use helpline for printing error/debug messages. The code resembles a TUI
counter part and only print the first line of the message.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1345104894-14205-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add struct ui_helpline in order to provide flexible implementation of
helpline APIs. And convert existing TUI implementation to use it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1345104894-14205-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The struct perf_error_ops is for flexible error logging.
We can register appropriate functions based on front-end.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338265382-6872-4-git-send-email-namhyung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If gtk2 support is not enabled (or failed for some reason) try TUI again
instead of falling directly back to the stdio interface.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335761711-31403-6-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now setup_browser can handle gtk2 front-end so split the TUI code to
ui/tui/setup.c in order to remove dependency.
To this end, make ui__init/exit global symbols and take an argument.
Also split gtk code to ui/gtk/setup.c.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335761711-31403-5-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
