commit 3267cb6d3a upstream.
Linear Address Masking (LAM) has a weakness related to transient
execution as described in the SLAM paper[1]. Unless Linear Address
Space Separation (LASS) is enabled this weakness may be exploitable.
Until kernel adds support for LASS[2], only allow LAM for COMPILE_TEST,
or when speculation mitigations have been disabled at compile time,
otherwise keep LAM disabled.
There are no processors in market that support LAM yet, so currently
nobody is affected by this issue.
[1] SLAM: https://download.vusec.net/papers/slam_sp24.pdf
[2] LASS: https://lore.kernel.org/lkml/20230609183632.48706-1-alexander.shishkin@linux.intel.com/
[ dhansen: update SPECULATION_MITIGATIONS -> CPU_MITIGATIONS ]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/5373262886f2783f054256babdf5a98545dc986b.1706068222.git.pawan.kumar.gupta%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6a6780e0b upstream.
In a commit 24b7f8e5cd ("firewire: core: use helper functions for self
ID sequence"), the enumeration over self ID sequence was refactored with
some helper functions with KUnit tests. These helper functions are
guaranteed to work expectedly by the KUnit tests, however their application
includes a mistake to assign invalid value to the index of port connected
to parent device.
This bug affects the case that any extra node devices which has three or
more ports are connected to 1394 OHCI controller. In the case, the path
to update the tree cache could hits WARN_ON(), and gets general protection
fault due to the access to invalid address computed by the invalid value.
This commit fixes the bug to assign correct port index.
Cc: stable@vger.kernel.org
Reported-by: Edmund Raile <edmund.raile@proton.me>
Closes: https://lore.kernel.org/lkml/8a9902a4ece9329af1e1e42f5fea76861f0bf0e8.camel@proton.me/
Fixes: 24b7f8e5cd ("firewire: core: use helper functions for self ID sequence")
Link: https://lore.kernel.org/r/20241025034137.99317-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df5fd75ee3 upstream.
As there is very little ordering in the KVM API, userspace can
instanciate a half-baked GIC (missing its memory map, for example)
at almost any time.
This means that, with the right timing, a thread running vcpu-0
can enter the kernel without a GIC configured and get a GIC created
behind its back by another thread. Amusingly, it will pick up
that GIC and start messing with the data structures without the
GIC having been fully initialised.
Similarly, a thread running vcpu-1 can enter the kernel, and try
to init the GIC that was previously created. Since this GIC isn't
properly configured (no memory map), it fails to correctly initialise.
And that's the point where we decide to teardown the GIC, freeing all
its resources. Behind vcpu-0's back. Things stop pretty abruptly,
with a variety of symptoms. Clearly, this isn't good, we should be
a bit more careful about this.
It is obvious that this guest is not viable, as it is missing some
important part of its configuration. So instead of trying to tear
bits of it down, let's just mark it as *dead*. It means that any
further interaction from userspace will result in -EIO. The memory
will be released on the "normal" path, when userspace gives up.
Cc: stable@vger.kernel.org
Reported-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241009183603.3221824-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae8f8b3761 upstream.
Alex reports that syzkaller has managed to trigger a use-after-free when
tearing down a VM:
BUG: KASAN: slab-use-after-free in kvm_put_kvm+0x300/0xe68 virt/kvm/kvm_main.c:5769
Read of size 8 at addr ffffff801c6890d0 by task syz.3.2219/10758
CPU: 3 UID: 0 PID: 10758 Comm: syz.3.2219 Not tainted 6.11.0-rc6-dirty #64
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x17c/0x1a8 arch/arm64/kernel/stacktrace.c:317
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:324
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x94/0xc0 lib/dump_stack.c:119
print_report+0x144/0x7a4 mm/kasan/report.c:377
kasan_report+0xcc/0x128 mm/kasan/report.c:601
__asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381
kvm_put_kvm+0x300/0xe68 virt/kvm/kvm_main.c:5769
kvm_vm_release+0x4c/0x60 virt/kvm/kvm_main.c:1409
__fput+0x198/0x71c fs/file_table.c:422
____fput+0x20/0x30 fs/file_table.c:450
task_work_run+0x1cc/0x23c kernel/task_work.c:228
do_notify_resume+0x144/0x1a0 include/linux/resume_user_mode.h:50
el0_svc+0x64/0x68 arch/arm64/kernel/entry-common.c:169
el0t_64_sync_handler+0x90/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
Upon closer inspection, it appears that we do not properly tear down the
MMIO registration for a vCPU that fails creation late in the game, e.g.
a vCPU w/ the same ID already exists in the VM.
It is important to consider the context of commit that introduced this bug
by moving the unregistration out of __kvm_vgic_vcpu_destroy(). That
change correctly sought to avoid an srcu v. config_lock inversion by
breaking up the vCPU teardown into two parts, one guarded by the
config_lock.
Fix the use-after-free while avoiding lock inversion by adding a
special-cased unregistration to __kvm_vgic_vcpu_destroy(). This is safe
because failed vCPUs are torn down outside of the config_lock.
Cc: stable@vger.kernel.org
Fixes: f616506754 ("KVM: arm64: vgic: Don't hold config_lock while unregistering redistributors")
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241007223909.2157336-1-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f559b2e9c5 upstream.
Ignore nCR3[4:0] when loading PDPTEs from memory for nested SVM, as bits
4:0 of CR3 are ignored when PAE paging is used, and thus VMRUN doesn't
enforce 32-byte alignment of nCR3.
In the absolute worst case scenario, failure to ignore bits 4:0 can result
in an out-of-bounds read, e.g. if the target page is at the end of a
memslot, and the VMM isn't using guard pages.
Per the APM:
The CR3 register points to the base address of the page-directory-pointer
table. The page-directory-pointer table is aligned on a 32-byte boundary,
with the low 5 address bits 4:0 assumed to be 0.
And the SDM's much more explicit:
4:0 Ignored
Note, KVM gets this right when loading PDPTRs, it's only the nSVM flow
that is broken.
Fixes: e4e517b4be ("KVM: MMU: Do not unconditionally read PDPTE from guest memory")
Reported-by: Kirk Swidowski <swidowski@google.com>
Cc: Andy Nguyen <theflow@google.com>
Cc: 3pvd <3pvd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241009140838.1036226-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f92f0a1b05 upstream.
While we do currently return -EFAULT in this case, it seems prudent to
follow the behaviour of other syscalls like clone3. It seems quite
unlikely that anyone depends on this error code being EFAULT, but we can
always revert this if it turns out to be an issue.
Cc: stable@vger.kernel.org # v5.6+
Fixes: fddb5d430a ("open: introduce openat2(2) syscall")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20241010-extensible-structs-check_fields-v3-3-d2833dfe6edd@cyphar.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af8512c527 upstream.
Fix a minor bug where we fail repairs on metadata files that do not have
attr forks because xrep_metadata_inode_subtype doesn't filter ENOENT.
Cc: stable@vger.kernel.org # v6.8
Fixes: 5a8e07e799 ("xfs: repair the inode core and forks of a metadata inode")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 229fd15908 upstream.
When copying a namespace we won't have added the new copy into the
namespace rbtree until after the copy succeeded. Calling free_mnt_ns()
will try to remove the copy from the rbtree which is invalid. Simply
free the namespace skeleton directly.
Link: https://lore.kernel.org/r/20241016-adapter-seilwinde-83c508a7bde1@brauner
Fixes: 1901c92497 ("fs: keep an index of current mount namespaces")
Tested-by: Brad Spengler <spender@grsecurity.net>
Cc: stable@vger.kernel.org # v6.11+
Reported-by: Brad Spengler <spender@grsecurity.net>
Suggested-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ed469df0b upstream.
Syzbot reported that after nilfs2 reads a corrupted file system image
and degrades to read-only, the BUG_ON check for the buffer delay flag
in submit_bh_wbc() may fail, causing a kernel bug.
This is because the buffer delay flag is not cleared when clearing the
buffer state flags to discard a page/folio or a buffer head. So, fix
this.
This became necessary when the use of nilfs2's own page clear routine
was expanded. This state inconsistency does not occur if the buffer
is written normally by log writing.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Link: https://lore.kernel.org/r/20241015213300.7114-1-konishi.ryusuke@gmail.com
Fixes: 8c26c4e269 ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Reported-by: syzbot+985ada84bf055a575c07@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=985ada84bf055a575c07
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8fa73ee44d upstream.
Add a DMI quirk for Samsung Galaxy Book2 to fix an initial lid state
detection issue.
The _LID device incorrectly returns the lid status as "closed" during
boot, causing the system to enter a suspend loop right after booting.
The quirk ensures that the correct lid state is reported initially,
preventing the system from immediately suspending after startup. It
only addresses the initial lid state detection and ensures proper
system behavior upon boot.
Signed-off-by: Shubham Panwar <shubiisp8@gmail.com>
Link: https://patch.msgid.link/20241020095045.6036-2-shubiisp8@gmail.com
[ rjw: Changelog edits ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 088984c8d5 upstream.
PRMT needs to find the correct type of block to translate the PA-VA
mapping for EFI runtime services.
The issue arises because the PRMT is finding a block of type
EFI_CONVENTIONAL_MEMORY, which is not appropriate for runtime services
as described in Section 2.2.2 (Runtime Services) of the UEFI
Specification [1]. Since the PRM handler is a type of runtime service,
this causes an exception when the PRM handler is called.
[Firmware Bug]: Unable to handle paging request in EFI runtime service
WARNING: CPU: 22 PID: 4330 at drivers/firmware/efi/runtime-wrappers.c:341
__efi_queue_work+0x11c/0x170
Call trace:
Let PRMT find a block with EFI_MEMORY_RUNTIME for PRM handler and PRM
context.
If no suitable block is found, a warning message will be printed, but
the procedure continues to manage the next PRM handler.
However, if the PRM handler is actually called without proper allocation,
it would result in a failure during error handling.
By using the correct memory types for runtime services, ensure that the
PRM handler and the context are properly mapped in the virtual address
space during runtime, preventing the paging request error.
The issue is really that only memory that has been remapped for runtime
by the firmware can be used by the PRM handler, and so the region needs
to have the EFI_MEMORY_RUNTIME attribute.
Link: https://uefi.org/sites/default/files/resources/UEFI_Spec_2_10_Aug29.pdf # [1]
Fixes: cefc7ca462 ("ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Koba Ko <kobak@nvidia.com>
Reviewed-by: Matthew R. Ochs <mochs@nvidia.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20241012205010.4165798-1-kobak@nvidia.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53f1a907d3 upstream.
The LG Gram Pro 16 2-in-1 (2024) the 16T90SP has its keybopard IRQ (1)
described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh
which breaks the keyboard.
Add the 16T90SP to the irq1_level_low_skip_override[] quirk table to fix
this.
Reported-by: Dirk Holten <dirk.holten@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219382
Cc: All applicable <stable@vger.kernel.org>
Suggested-by: Dirk Holten <dirk.holten@gmx.de>
Signed-off-by: Christian Heusel <christian@heusel.eu>
Link: https://patch.msgid.link/20241017-lg-gram-pro-keyboard-v2-1-7c8fbf6ff718@heusel.eu
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf58f03931 upstream.
If a BIOS provides bad data in response to an ATIF method call
this causes a NULL pointer dereference in the caller.
```
? show_regs (arch/x86/kernel/dumpstack.c:478 (discriminator 1))
? __die (arch/x86/kernel/dumpstack.c:423 arch/x86/kernel/dumpstack.c:434)
? page_fault_oops (arch/x86/mm/fault.c:544 (discriminator 2) arch/x86/mm/fault.c:705 (discriminator 2))
? do_user_addr_fault (arch/x86/mm/fault.c:440 (discriminator 1) arch/x86/mm/fault.c:1232 (discriminator 1))
? acpi_ut_update_object_reference (drivers/acpi/acpica/utdelete.c:642)
? exc_page_fault (arch/x86/mm/fault.c:1542)
? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623)
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:387 (discriminator 2)) amdgpu
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:386 (discriminator 1)) amdgpu
```
It has been encountered on at least one system, so guard for it.
Fixes: d38ceaf99e ("drm/amdgpu: add core driver (v4)")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c9b7c809b8)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a2339058e upstream.
In debugging some corrupt squashfs files, we observed symptoms of
corrupt page cache pages but correct on-disk contents. Further
investigation revealed that the exact symptom was a correct page
followed by an incorrect, duplicate, page. This got us thinking about
extent maps.
commit ac05ca913e ("Btrfs: fix race between using extent maps and merging them")
enforces a reference count on the primary `em` extent_map being merged,
as that one gets modified.
However, since,
commit 3d2ac99224 ("btrfs: introduce new members for extent_map")
both 'em' and 'merge' get modified, which started modifying 'merge'
and thus introduced the same race.
We were able to reproduce this by looping the affected squashfs workload
in parallel on a bunch of separate btrfs-es while also dropping caches.
We are still working on a simple enough reproducer to make into an fstest.
The simplest fix is to stop modifying 'merge', which is not essential,
as it is dropped immediately after the merge. This behavior is simply
a consequence of the order of the two extent maps being important in
computing the new values. Modify merge_ondisk_extents to take prev and
next by const* and also take a third merged parameter that it puts the
results in. Note that this introduces the rather odd behavior of passing
'em' to merge_ondisk_extents as a const * and as a regular ptr.
Fixes: 3d2ac99224 ("btrfs: introduce new members for extent_map")
CC: stable@vger.kernel.org # 6.11+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf9821ba47 upstream.
When btrfs reserves an extent and does not use it (e.g, by an error), it
calls btrfs_free_reserved_extent() to free the reserved extent. In the
process, it calls btrfs_add_free_space() and then it accounts the region
bytes as block_group->zone_unusable.
However, it leaves the space_info->bytes_zone_unusable side not updated. As
a result, ENOSPC can happen while a space_info reservation succeeded. The
reservation is fine because the freed region is not added in
space_info->bytes_zone_unusable, leaving that space as "free". OTOH,
corresponding block group counts it as zone_unusable and its allocation
pointer is not rewound, we cannot allocate an extent from that block group.
That will also negate space_info's async/sync reclaim process, and cause an
ENOSPC error from the extent allocation process.
Fix that by returning the space to space_info->bytes_zone_unusable.
Ideally, since a bio is not submitted for this reserved region, we should
return the space to free space and rewind the allocation pointer. But, it
needs rework on extent allocation handling, so let it work in this way for
now.
Fixes: 169e0da91a ("btrfs: zoned: track unusable bytes for zones")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c36a72c1d upstream.
[BUG]
Syzbot reports the following crash:
BTRFS info (device loop0 state MCS): disabling free space tree
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1)
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2)
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:backup_super_roots fs/btrfs/disk-io.c:1691 [inline]
RIP: 0010:write_all_supers+0x97a/0x40f0 fs/btrfs/disk-io.c:4041
Call Trace:
<TASK>
btrfs_commit_transaction+0x1eae/0x3740 fs/btrfs/transaction.c:2530
btrfs_delete_free_space_tree+0x383/0x730 fs/btrfs/free-space-tree.c:1312
btrfs_start_pre_rw_mount+0xf28/0x1300 fs/btrfs/disk-io.c:3012
btrfs_remount_rw fs/btrfs/super.c:1309 [inline]
btrfs_reconfigure+0xae6/0x2d40 fs/btrfs/super.c:1534
btrfs_reconfigure_for_mount fs/btrfs/super.c:2020 [inline]
btrfs_get_tree_subvol fs/btrfs/super.c:2079 [inline]
btrfs_get_tree+0x918/0x1920 fs/btrfs/super.c:2115
vfs_get_tree+0x90/0x2b0 fs/super.c:1800
do_new_mount+0x2be/0xb40 fs/namespace.c:3472
do_mount fs/namespace.c:3812 [inline]
__do_sys_mount fs/namespace.c:4020 [inline]
__se_sys_mount+0x2d6/0x3c0 fs/namespace.c:3997
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[CAUSE]
To support mounting different subvolume with different RO/RW flags for
the new mount APIs, btrfs introduced two workaround to support this feature:
- Skip mount option/feature checks if we are mounting a different
subvolume
- Reconfigure the fs to RW if the initial mount is RO
Combining these two, we can have the following sequence:
- Mount the fs ro,rescue=all,clear_cache,space_cache=v1
rescue=all will mark the fs as hard read-only, so no v2 cache clearing
will happen.
- Mount a subvolume rw of the same fs.
We go into btrfs_get_tree_subvol(), but fc_mount() returns EBUSY
because our new fc is RW, different from the original fs.
Now we enter btrfs_reconfigure_for_mount(), which switches the RO flag
first so that we can grab the existing fs_info.
Then we reconfigure the fs to RW.
- During reconfiguration, option/features check is skipped
This means we will restart the v2 cache clearing, and convert back to
v1 cache.
This will trigger fs writes, and since the original fs has "rescue=all"
option, it skips the csum tree read.
And eventually causing NULL pointer dereference in super block
writeback.
[FIX]
For reconfiguration caused by different subvolume RO/RW flags, ensure we
always run btrfs_check_options() to ensure we have proper hard RO
requirements met.
In fact the function btrfs_check_options() doesn't really do many
complex checks, but hard RO requirement and some feature dependency
checks, thus there is no special reason not to do the check for mount
reconfiguration.
Reported-by: syzbot+56360f93efa90ff15870@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/0000000000008c5d090621cb2770@google.com/
Fixes: f044b31867 ("btrfs: handle the ro->rw transition for mounting different subvolumes")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d72eba1cf upstream.
After commit:
63edbaa48a ("x86/cpu/topology: Add support for the AMD 0x80000026 leaf")
... on AMD processors that support extended CPUID leaf 0x80000026, the
topology_die_cpumask() and topology_logical_die_id() macros no longer
return the package cpumask and package ID, instead they return the CCD
(Core Complex Die) mask and ID respectively.
This leads to the energy-pkg event scope to be modified to CCD instead of package.
So, change the PMU scope for AMD and Hygon back to package.
On a 12 CCD 1 Package AMD Zen4 Genoa machine:
Before:
$ cat /sys/devices/power/cpumask
0,8,16,24,32,40,48,56,64,72,80,88.
The expected cpumask here is supposed to be just "0", as it is a package
scope event, only one CPU will be collecting the event for all the CPUs in
the package.
After:
$ cat /sys/devices/power/cpumask
0
[ mingo: Cleaned up the changelog ]
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20240904100934.3260-1-Dhananjay.Ugwekar@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f70fdd425 upstream.
Add new PCI IDs for Device 18h and Function 4 to enable the amd_atl driver
on those systems.
Signed-off-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/all/20240819123041.915734-1-richard.gong@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75f49c3dc7 upstream.
The ret may be zero in btrfs_search_dir_index_item() and should not
passed to ERR_PTR(). Now btrfs_unlink_subvol() is the only caller to
this, reconstructed it to check ERR_PTR(-ENOENT) while ret >= 0.
This fixes smatch warnings:
fs/btrfs/dir-item.c:353
btrfs_search_dir_index_item() warn: passing zero to 'ERR_PTR'
Fixes: 9dcbe16fcc ("btrfs: use btrfs_for_each_slot in btrfs_search_dir_index_item")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3510e684b8 upstream.
After the migration to use fs context for processing mount options we had
a slight change in the semantics for remounting a filesystem that was
mounted with compress-force. Before we could clear compress-force by
passing only "-o compress[=algo]" during a remount, but after that change
that does not work anymore, force-compress is still present and one needs
to pass "-o compress-force=no,compress[=algo]" to the mount command.
Example, when running on a kernel 6.8+:
$ mount -o compress-force=zlib:9 /dev/sdi /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress-force=zlib:9,discard=async,space_cache=v2,subvolid=5,subvol=/)
$ mount -o remount,compress=zlib:5 /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress-force=zlib:5,discard=async,space_cache=v2,subvolid=5,subvol=/)
On a 6.7 kernel (or older):
$ mount -o compress-force=zlib:9 /dev/sdi /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress-force=zlib:9,discard=async,space_cache=v2,subvolid=5,subvol=/)
$ mount -o remount,compress=zlib:5 /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress=zlib:5,discard=async,space_cache=v2,subvolid=5,subvol=/)
So update btrfs_parse_param() to clear "compress-force" when "compress" is
given, providing the same semantics as kernel 6.7 and older.
Reported-by: Roman Mamedov <rm@romanrm.net>
Link: https://lore.kernel.org/linux-btrfs/20241014182416.13d0f8b0@nvm/
CC: stable@vger.kernel.org # 6.8+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f9062a48d upstream.
Since commit 011b46c304 ("btrfs: skip subtree scan if it's too high to
avoid low stall in btrfs_commit_transaction()"), btrfs qgroup can
automatically skip large subtree scan at the cost of marking qgroup
inconsistent.
It's designed to address the final performance problem of snapshot drop
with qgroup enabled, but to be safe the default value is
BTRFS_MAX_LEVEL, requiring a user space daemon to set a different value
to make it work.
I'd say it's not a good idea to rely on user space tool to set this
default value, especially when some operations (snapshot dropping) can
be triggered immediately after mount, leaving a very small window to
that that sysfs interface.
So instead of disabling this new feature by default, enable it with a
low threshold (3), so that large subvolume tree drop at mount time won't
cause huge qgroup workload.
CC: stable@vger.kernel.org # 6.1
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d93df29bda ]
When the nominal_freq recorded by the kernel is equal to the lowest_freq,
and the frequency adjustment operation is triggered externally, there is
a logic error in cppc_perf_to_khz()/cppc_khz_to_perf(), resulting in perf
and khz conversion errors.
Fix this by adding a branch processing logic when nominal_freq is equal
to lowest_freq.
Fixes: ec1c7ad476 ("cpufreq: CPPC: Fix performance/frequency conversion")
Signed-off-by: liwei <liwei728@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20241024022952.2627694-1-liwei728@huawei.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad783b9f8e ]
Old device trees for some platforms already define wifi nodes for the WCN
family of chips since before power sequencing was added upstream.
These nodes don't consume the regulator outputs from the PMU, and if we
allow this driver to bind to one of such "incomplete" nodes, we'll see a
kernel log error about the infinite probe deferral.
Extend the driver by adding a platform data struct matched against the
compatible. This struct contains the pwrseq target string as well as a
validation function called right after entering probe().
For Qualcomm WCN models, check the existence of the regulator supply
property that indicates the DT is already using power sequencing and return
-ENODEV if it's not there, indicating to the driver model that the device
should not be bound to the pwrctl driver.
Link: https://lore.kernel.org/r/20241007092447.18616-1-brgl@bgdev.pl
Fixes: 6140d185a4 ("PCI/pwrctl: Add a PCI power control driver for power sequenced devices")
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/Zv565olMDDGHyYVt@hovoldconsulting.com/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ce1007f42 ]
There's a issue as follows:
WARNING: CPU: 1 PID: 27826 at mm/slub.c:4698 free_large_kmalloc+0xac/0xe0
RIP: 0010:free_large_kmalloc+0xac/0xe0
Call Trace:
<TASK>
? __warn+0xea/0x330
mempool_destroy+0x13f/0x1d0
init_cifs+0xa50/0xff0 [cifs]
do_one_initcall+0xdc/0x550
do_init_module+0x22d/0x6b0
load_module+0x4e96/0x5ff0
init_module_from_file+0xcd/0x130
idempotent_init_module+0x330/0x620
__x64_sys_finit_module+0xb3/0x110
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Obviously, 'cifs_io_request_pool' is not created by mempool_create().
So just use mempool_exit() to revert 'cifs_io_request_pool'.
Fixes: edea94a697 ("cifs: Add mempools for cifs_io_request and cifs_io_subrequest structs")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: David Howells <dhowells@redhat.com
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a5dd61151 ]
In smb3_reconfigure(), after duplicating ctx->password and
ctx->password2 with kstrdup(), we need to check for allocation
failures.
If ses->password allocation fails, return -ENOMEM.
If ses->password2 allocation fails, free ses->password, set it
to NULL, and return -ENOMEM.
Fixes: c1eb537bf4 ("cifs: allow changing password during remount")
Reviewed-by: David Howells <dhowells@redhat.com
Signed-off-by: Haoxiang Li <make24@iscas.ac.cn>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5ff2fb2e7 ]
In the normal case, when we excute `echo 0 > /proc/fs/nfsd/threads`, the
function `nfs4_state_destroy_net` in `nfs4_state_shutdown_net` will
release all resources related to the hashed `nfs4_client`. If the
`nfsd_client_shrinker` is running concurrently, the `expire_client`
function will first unhash this client and then destroy it. This can
lead to the following warning. Additionally, numerous use-after-free
errors may occur as well.
nfsd_client_shrinker echo 0 > /proc/fs/nfsd/threads
expire_client nfsd_shutdown_net
unhash_client ...
nfs4_state_shutdown_net
/* won't wait shrinker exit */
/* cancel_work(&nn->nfsd_shrinker_work)
* nfsd_file for this /* won't destroy unhashed client1 */
* client1 still alive nfs4_state_destroy_net
*/
nfsd_file_cache_shutdown
/* trigger warning */
kmem_cache_destroy(nfsd_file_slab)
kmem_cache_destroy(nfsd_file_mark_slab)
/* release nfsd_file and mark */
__destroy_client
====================================================================
BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on
__kmem_cache_shutdown()
--------------------------------------------------------------------
CPU: 4 UID: 0 PID: 764 Comm: sh Not tainted 6.12.0-rc3+ #1
dump_stack_lvl+0x53/0x70
slab_err+0xb0/0xf0
__kmem_cache_shutdown+0x15c/0x310
kmem_cache_destroy+0x66/0x160
nfsd_file_cache_shutdown+0xac/0x210 [nfsd]
nfsd_destroy_serv+0x251/0x2a0 [nfsd]
nfsd_svc+0x125/0x1e0 [nfsd]
write_threads+0x16a/0x2a0 [nfsd]
nfsctl_transaction_write+0x74/0xa0 [nfsd]
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
====================================================================
BUG nfsd_file_mark (Tainted: G B W ): Objects remaining
nfsd_file_mark on __kmem_cache_shutdown()
--------------------------------------------------------------------
dump_stack_lvl+0x53/0x70
slab_err+0xb0/0xf0
__kmem_cache_shutdown+0x15c/0x310
kmem_cache_destroy+0x66/0x160
nfsd_file_cache_shutdown+0xc8/0x210 [nfsd]
nfsd_destroy_serv+0x251/0x2a0 [nfsd]
nfsd_svc+0x125/0x1e0 [nfsd]
write_threads+0x16a/0x2a0 [nfsd]
nfsctl_transaction_write+0x74/0xa0 [nfsd]
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
To resolve this issue, cancel `nfsd_shrinker_work` using synchronous
mode in nfs4_state_shutdown_net.
Fixes: 7c24fa2250 ("NFSD: replace delayed_work with work_struct for nfsd_client_shrinker")
Signed-off-by: Yang Erkun <yangerkun@huaweicloud.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5209d1b654 ]
The caller of the function dev_pm_qos_add_request() checks again a non
zero value but dev_pm_qos_add_request() can return '1' if the request
already exists. Therefore, the setup function fails while the QoS
request actually did not failed.
Fix that by changing the check against a negative value like all the
other callers of the function.
Fixes: e446556173 ("powercap/drivers/dtpm: Add dtpm devfreq with energy model support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241018021205.46460-1-yuancan@huawei.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51521d2e2c ]
The fb_io_mmap() function is used in the file operations but
not enabled in all configurations unless FB_IOMEM_FOPS gets
selected:
ld.lld-20: error: undefined symbol: fb_io_mmap
referenced by wm8505fb.c
drivers/video/fbdev/wm8505fb.o:(wm8505fb_ops) in archive vmlinux.a
Fixes: 11754a5046 ("fbdev/wm8505fb: Initialize fb_ops to fbdev I/O-memory helpers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72cafe63b3 ]
The step variable is initialized to zero. It is changed in the loop,
but if it's not changed it will remain zero. Add a variable check
before the division.
The observed behavior was introduced by commit 826b5de90c
("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size"),
and it is difficult to show that any of the interval parameters will
satisfy the snd_interval_test() condition with data from the
amdtp_rate_table[] table.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 826b5de90c ("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size")
Signed-off-by: Andrey Shumilin <shum.sdl@nppct.ru>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/20241018060018.1189537-1-shum.sdl@nppct.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da95e891dd ]
On i.MX8MM the register of volume control has positive and negative
values. It is different from other platforms like i.MX8MP and i.MX93
which only have positive values. Add a volume_sx flag to use SX_TLV
volume control for this kind of platform. Use common TLV volume control
for other platforms.
Fixes: cdfa92eb90 ("ASoC: fsl_micfil: Correct the number of steps on SX controls")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20241017071507.2577786-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20121d3f58 ]
yangyun reported that libfuse test test_copy_file_range() copies zero
bytes from a newly written file when fuse passthrough is enabled.
The reason is that extending passthrough write is not updating the fuse
inode size and when vfs_copy_file_range() observes a zero size inode,
it returns without calling the filesystem copy_file_range() method.
Fix this by adjusting the fuse inode size after an extending passthrough
write.
This does not provide cache coherency of fuse inode attributes and
backing inode attributes, but it should prevent situations where fuse
inode size is too small, causing read/copy to be wrongly shortened.
Reported-by: yangyun <yangyun50@huawei.com>
Closes: https://github.com/libfuse/libfuse/issues/1048
Fixes: 57e1176e60 ("fuse: implement read/write passthrough")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d59d474e1 ]
Since adding the PCI power control code, we may end up with a race between
the pwrctl platform device rescanning the bus and host controller probe
functions. The latter need to take the rescan lock when adding devices or
we may end up in an undefined state having two incompletely added devices
and hit the following crash when trying to remove the device over sysfs:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Call trace:
__pi_strlen+0x14/0x150
kernfs_find_ns+0x80/0x13c
kernfs_remove_by_name_ns+0x54/0xf0
sysfs_remove_bin_file+0x24/0x34
pci_remove_resource_files+0x3c/0x84
pci_remove_sysfs_dev_files+0x28/0x38
pci_stop_bus_device+0x8c/0xd8
pci_stop_bus_device+0x40/0xd8
pci_stop_and_remove_bus_device_locked+0x28/0x48
remove_store+0x70/0xb0
dev_attr_store+0x20/0x38
sysfs_kf_write+0x58/0x78
kernfs_fop_write_iter+0xe8/0x184
vfs_write+0x2dc/0x308
ksys_write+0x7c/0xec
Fixes: 4565d2652a ("PCI/pwrctl: Add PCI power control core code")
Link: https://lore.kernel.org/r/20241003084342.27501-1-brgl@bgdev.pl
Reported-by: Konrad Dybcio <konradybcio@kernel.org>
Tested-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b064d200a ]
On the HiHope boards, we have a single port with a single endpoint defined
as below:
....
rsnd_port: port {
rsnd_endpoint: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
dai-format = "i2s";
bitclock-master = <&rsnd_endpoint>;
frame-master = <&rsnd_endpoint>;
playback = <&ssi2>;
};
};
....
With commit 547b02f74e ("ASoC: rsnd: enable multi Component support for
Audio Graph Card/Card2"), support for multiple ports was added. This caused
probe failures on HiHope boards, as the endpoint could not be retrieved due
to incorrect device node pointers being used.
This patch fixes the issue by updating the `rsnd_dai_of_node()` and
`rsnd_dai_probe()` functions to use the correct device node pointers based
on the port names ('port' or 'ports'). It ensures that the endpoint is
properly parsed for both single and multi-port configurations, restoring
compatibility with HiHope boards.
Fixes: 547b02f74e ("ASoC: rsnd: enable multi Component support for Audio Graph Card/Card2")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241010141432.716868-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca2803fadf ]
The variable slot_found is being initialized to zero and inside
a for-loop is being checked if it's reached MAX_NUM_CH, however,
this is currently impossible since slot_found is never changed.
In a previous loop a similar coding pattern is used and slot_found
is being incremented. It appears the increment of slot_found is
missing from the loop, so fix the code by adding in the increment.
Fixes: 6a8e1d46f0 ("ASoC: max98388: add amplifier driver")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20241010182032.776280-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9eb2142a2a ]
When v4 topology support was removed, minimal topology ABI version
should have been bumped.
Fixes: fe4a074542 ("ASoC: Drop soc-topology ABI v4 support")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20241009081230.304918-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8380dbf1b9 ]
Combinations of "tx" alone, "rx" alone and "tx", "rx" together are
supposedly valid (see link below), which is not the case today as "rx"
alone is not accepted by the current binding.
Let's rework the two interrupt properties to expose all correct
possibilities.
Cc: Péter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/linux-sound/20241003102552.2c11840e@xps-13/T/#m277fce1d49c50d94e071f7890aed472fa2c64052
Fixes: 8be90641a0 ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241003083611.461894-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17d8adc4cd ]
My understanding of the interrupts property is that it can either be:
1/ - TX
2/ - TX
- RX
3/ - Common/combined.
There are very little chances that either:
- TX
- Common/combined
or even
- TX
- RX
- Common/combined
could be a thing.
Looking at the interrupt-names definition (which uses oneOf instead of
anyOf), it makes indeed little sense to use anyOf in the interrupts
definition. I believe this is just a mistake, hence let's fix it.
Fixes: 8be90641a0 ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241001204749.390054-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 8380dbf1b9 ("ASoC: dt-bindings: davinci-mcasp: Fix interrupt properties")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2f803052b ]
There is an out-of-bounds read in bpf_link_show_fdinfo() for the sockmap
link fd. Fix it by adding the missing BPF_LINK_TYPE invocation for
sockmap link
Also add comments for bpf_link_type to prevent missing updates in the
future.
Fixes: 699c23f02c ("bpf: Add bpf_link support for sk_msg and sk_skb progs")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241024013558.1135167-2-houtao@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e65ede526 ]
The MV88E6393X family of devices can run its cycle counter off
an internal 250MHz clock instead of an external 125MHz one.
Add support for this cycle counter period by adding another set
of coefficients and lowering the periodic cycle counter read interval
to compensate for faster overflows at the increased frequency.
Otherwise, the PHC runs at 2x real time in userspace and cannot be
synchronized.
Fixes: de776d0d31 ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Shenghao Yang <me@shenghaoyang.info>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e3c18097a ]
Instead of relying on a fixed mapping of hardware family to cycle
counter frequency, pull this information from the
MV88E6XXX_TAI_CLOCK_PERIOD register.
This lets us support switches whose cycle counter frequencies depend on
board design.
Fixes: de776d0d31 ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shenghao Yang <me@shenghaoyang.info>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67af86afff ]
Instead of having them as individual fields in ptp_ops, wrap the
coefficients in a separate struct so they can be referenced together.
Fixes: de776d0d31 ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Shenghao Yang <me@shenghaoyang.info>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee76eb2434 ]
The well-known errata regarding EEE not being functional on various KSZ
switches has been refactored a few times. Recently the refactoring has
excluded several switches that the errata should also apply to.
Disable EEE for additional switches with this errata and provide
additional comments referring to the public errata document.
The original workaround for the errata was applied with a register
write to manually disable the EEE feature in MMD 7:60 which was being
applied for KSZ9477/KSZ9897/KSZ9567 switch ID's.
Then came commit 26dd2974c5 ("net: phy: micrel: Move KSZ9477 errata
fixes to PHY driver") and commit 6068e6d7ba ("net: dsa: microchip:
remove KSZ9477 PHY errata handling") which moved the errata from the
switch driver to the PHY driver but only for PHY_ID_KSZ9477 (PHY ID)
however that PHY code was dead code because an entry was never added
for PHY_ID_KSZ9477 via MODULE_DEVICE_TABLE.
This was apparently realized much later and commit 54a4e5c163 ("net:
phy: micrel: add Microchip KSZ 9477 to the device table") added the
PHY_ID_KSZ9477 to the PHY driver but as the errata was only being
applied to PHY_ID_KSZ9477 it's not completely clear what switches
that relates to.
Later commit 6149db4997 ("net: phy: micrel: fix KSZ9477 PHY issues
after suspend/resume") breaks this again for all but KSZ9897 by only
applying the errata for that PHY ID.
Following that this was affected with commit 08c6d8bae48c("net: phy:
Provide Module 4 KSZ9477 errata (DS80000754C)") which removes
the blatant register write to MMD 7:60 and replaces it by
setting phydev->eee_broken_modes = -1 so that the generic phy-c45 code
disables EEE but this is only done for the KSZ9477_CHIP_ID (Switch ID).
Lastly commit 0411f73c13 ("net: dsa: microchip: disable EEE for
KSZ8567/KSZ9567/KSZ9896/KSZ9897.") adds some additional switches
that were missing to the errata due to the previous changes.
This commit adds an additional set of switches.
Fixes: 0411f73c13 ("net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241018160658.781564-1-tharvey@gateworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9806f28314 ]
We need `goto next_insn;` at the end of patching instead of `continue;`.
It currently works by accident by making verifier re-process patched
instructions.
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Fixes: 314a53623c ("bpf: inline bpf_get_branch_snapshot() helper")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20241023161916.2896274-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ee288e69d ]
Peter reported that perf_event_detach_bpf_prog might skip to release
the bpf program for -ENOENT error from bpf_prog_array_copy.
This can't happen because bpf program is stored in perf event and is
detached and released only when perf event is freed.
Let's drop the -ENOENT check and make sure the bpf program is released
in any case.
Fixes: 170a7e3ea0 ("bpf: bpf_prog_array_copy() should return -ENOENT if exclude_prog not found")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241023200352.3488610-1-jolsa@kernel.org
Closes: https://lore.kernel.org/lkml/20241022111638.GC16066@noisy.programming.kicks-ass.net/
Signed-off-by: Sasha Levin <sashal@kernel.org>
