Commit Graph

14 Commits

Author SHA1 Message Date
Jonas Gorski
4f02b50ece leds: bcm6328: fix signal source assignment for leds 4 to 7
Each nibble represents 4 LEDs, and in case of the higher register, bit 0
represents LED 4, so we need to use modulus for the LED number as well.

Fixes: fd7b025a23 ("leds: add BCM6328 LED driver")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-06-13 20:36:56 +02:00
Álvaro Fernández Rojas
1b85a5a5ef leds: bcm6328: improve blink support
BCM6328 controller has a margin of 20ms per blink step, which means that
we can only set it to 20, 40, 60 ... 1260 ms (0x3f * 20ms).
However, when checking if delay_on == delay_off, we were not considering
the case when the user had set delay_on=20 and delay_off=21, since this
will cause the driver to fallback to software blinking.
This update fixes this issue and improves blink steps by rounding them
in a more sensible way. Now 30-49ms is rounded to 40 ms, and previous
behaviour implied 40-59ms being rounded to 40 ms.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:40 +01:00
Álvaro Fernández Rojas
143b77ce03 leds: bcm6328: simplify duplicated unlock in bcm6328_blink_set
Instead of duplicating the unlock we can store the return value and use a
single unlock before returning that value, which simplifies the code.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:40 +01:00
Álvaro Fernández Rojas
a06cd4b762 leds: bcm6328: add little endian support
This adds little endian support while keeping big endian support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:40 +01:00
Álvaro Fernández Rojas
0171dc6abb leds: bcm6328: remove unneded lock when checking initial LED
This lock isn't really needed, since we're only reading the register and
changes made to other LEDs aren't relevant.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:39 +01:00
Álvaro Fernández Rojas
41251e2469 leds: bcm6328: code cleaning
- Remove double whitespace
- Add missing brackets
- Add spinlock info

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:39 +01:00
Simon Arlott
b964c5ba6d leds: bcm6328: Swap LED ON and OFF definitions
The values of BCM6328_LED_MODE_ON and BCM6328_LED_MODE_OFF were named
for active low LEDs. These should be swapped so that they are named for
the default case of active high LEDs.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:37 +01:00
Simon Arlott
9d3c0663df leds: bcm6328: Reuse bcm6328_led_set() instead of copying its functionality
When ensuring a consistent initial LED state in bcm6328_led (as they may
be blinking instead of on/off), the LED register is set using an inverted
copy of bcm6328_led_set(). To avoid further errors relating to active low
handling, call this function directly instead.

As bcm6328_led_set() acquires the same spinlock again when updating the
register, it is called after unlocking.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:37 +01:00
Julia Lawall
6cc7624415 leds: bcm6328: add missing of_node_put
for_each_available_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
@@

 for_each_available_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
+  of_node_put(child);
?  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03 09:00:04 +01:00
Álvaro Fernández Rojas
9f82c778ce leds-bcm6328: add more init configuration options
This patch adds more init register configuration options:
- Serial LEDs multiplexing.
- Serial LEDs clock signal low/high polarity.
- Serial LEDs data signal low/high polarity.
- Serial LEDs shift direction inverted/normal.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03 08:59:44 +01:00
Álvaro Fernández Rojas
d8fe1606d1 leds-bcm6328: simplify and improve default-state handling
This patch simplifies and improves the code related to
default-state handling.
It also changes the code to power off the LEDs by default.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03 08:59:40 +01:00
Álvaro Fernández Rojas
79653fbb33 leds-bcm6328: print invalid LED
Print invalid LED instead of warning only about maximum LED value.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03 08:59:38 +01:00
Luis de Bethencourt
6528ca19c1 leds: bcm6328: Fix module autoload for OF platform driver
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17 10:01:54 +02:00
Álvaro Fernández Rojas
fd7b025a23 leds: add BCM6328 LED driver
This adds support for the LED controller on Broadcom's BCM6328.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-05-04 11:22:28 -07:00