korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-15 15:04:27 +08:00
Code Issues Packages Projects Releases Wiki Activity
966,047 Commits 113 Branches 5,294 Tags 3.6 GiB
67d3dcf12a
Commit Graph

7177 Commits

Author SHA1 Message Date
Biju Das
67d3dcf12a arm64: dts: renesas: hihope-rzg2-ex: Drop rxc-skew-ps from ethernet-phy node 
HiHope RZG2[HMN] boards uses Realtek phy and the driver does not support
rxc-skew-ps property. So remove rxc-skew-ps from ethernet-phy node.

Fixes: 7433f1fb8e ("arm64: dts: renesas: Add HiHope RZ/G2M sub board support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20201015132350.8360-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
 2020-10-26 09:56:33 +01:00
Geert Uytterhoeven
ca3b4330a5 arm64: dts: renesas: r8a77961: Add MSIOF nodes 
Add the device nodes for all Clock-Synchronized Serial Interface with
FIFO (MSIOF) instances on R-Car M3-W+.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201005112951.22532-1-geert+renesas@glider.be
 2020-10-26 09:56:32 +01:00
Krzysztof Kozlowski
e8c4715888 arm64: dts: renesas: Align GPIO hog names with dtschema 
The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx expects GPIO hogs to end with 'hog' suffix.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201002163945.7885-1-krzk@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
 2020-10-26 09:56:32 +01:00
Linus Torvalds
e533cda12d ARM: Devicetree updates 
As usual, most of the changes are to devicetrees. Besides smaller fixes,
 some refactorings and cleanups, some of the new platforms and chips
 (or significant features) supported are below:
 
 Broadcom boards:
  - Cisco Meraki MR32 (BCM53016-based)
  - BCM2711 (RPi4) display pipeline support
 
 Actions Semi boards:
  - Caninos Loucos Labrador SBC (S500-based)
  - RoseapplePi SBC (S500-based)
 
 Allwinner SoCs/boards:
  - A100 SoC with Perf1 board
  - Mali, DMA, Cetrus and IR support for R40 SoC
 
 Amlogic boards:
  - Libretch S905x CC V2 board
  - Hardkernel ODROID-N2+ board
 
 Aspeed boards/platforms:
  - Wistron Mowgli (AST2500-based, Power9 OpenPower server)
  - Facebook Wedge400 (AST2500-based, ToR switch)
 
 Hisilicon SoC:
  - SD5203 SoC
 
 Nvidia boards:
  - Tegra234 VDK, for pre-silicon Orin SoC
 
 NXP i.MX boards:
  - Librem 5 phone
  - i.MX8MM DDR4 EVK
  - Variscite VAR-SOM-MX8MN SoM
  - Symphony board
  - Tolino Shine 2 HD
  - TQMa6 SoM
  - Y Soft IOTA Orion
 
 Rockchip boards:
  - NanoPi R2S board
  - A95X-Z2 board
  - more Rock-Pi4 variants
 
 STM32 boards:
  - Odyssey SOM board (STM32MP157CAC-based)
  - DH DRC02 board
 
 Toshiba SoCs/boards:
  - Visconti SoC and TPMV7708 board
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TVacPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx37MMP/imMO5e0QY1/7xxXWm4Kgc/Uffqw2Dvhj74a
 4Nrudwz6oUFGpZzIFYxqeCeWwotjA0nXmvM4Nl/SbxtlbV6nY/JrOL1OJToaGY0z
 Oc1jdA0MdXITdi6Xl5PTRqDeIHTSUmTclZWi5gvT7LFEvHog3mquJ7PiNTrjyuV0
 9BmHipwfmH6V5gDJZvN2dDlkhy0cpQKJFw7ylKCL89UNiEAd2QtNG0d0RLdz7yPX
 IGdecFelOhG9MSZyuFYYB2HOI33ukjZ9dA+yFy7BWOqegf/Z5hI02mxpke7Sys/5
 4XEN7ksSSYr6sm3h9XNW++IYkapZ9y/ZW+sQdiBZ3GMOwMXj02TdRkpC7f+FgAPo
 Hl7yXodGmXynL6ULu7/lIbBvqfWkLcwfVCYZx6PoWRE2q5g5ifoYp9b8kI5cLXrb
 BJn85XIuIaoO0cgrq7EzZnksaiwY1CNL84mYgkKRCGbBoJKHRiU+8Ilm5SKzk3kq
 KJ0gmbwFMjvTYxs3g6LPCo0jUNLjmLQMr0tL7iHDWkk5uqA+gfjKSLQfPby3jrMr
 6RDZBzMB+tPz1e++RWo41XD/Mm2kw8MGstsCOLzk2TdLh7e3fPfU4g7m0aqs/Q1y
 +LCqshffF/XVzV2uTFHDUGWufIM9nY6rdzuBc+JACJ5E+QyDg1tGKtMB3TYqgdN2
 aRY3NLSv
 =xjfB
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM Devicetree updates from Olof Johansson:
 "As usual, most of the changes are to devicetrees.

  Besides smaller fixes, some refactorings and cleanups, some of the new
  platforms and chips (or significant features) supported are below:

  Broadcom boards:
   - Cisco Meraki MR32 (BCM53016-based)
   - BCM2711 (RPi4) display pipeline support

  Actions Semi boards:
   - Caninos Loucos Labrador SBC (S500-based)
   - RoseapplePi SBC (S500-based)

  Allwinner SoCs/boards:
   - A100 SoC with Perf1 board
   - Mali, DMA, Cetrus and IR support for R40 SoC

  Amlogic boards:
   - Libretch S905x CC V2 board
   - Hardkernel ODROID-N2+ board

  Aspeed boards/platforms:
   - Wistron Mowgli (AST2500-based, Power9 OpenPower server)
   - Facebook Wedge400 (AST2500-based, ToR switch)

  Hisilicon SoC:
   - SD5203 SoC

  Nvidia boards:
   - Tegra234 VDK, for pre-silicon Orin SoC

  NXP i.MX boards:
   - Librem 5 phone
   - i.MX8MM DDR4 EVK
   - Variscite VAR-SOM-MX8MN SoM
   - Symphony board
   - Tolino Shine 2 HD
   - TQMa6 SoM
   - Y Soft IOTA Orion

  Rockchip boards:
   - NanoPi R2S board
   - A95X-Z2 board
   - more Rock-Pi4 variants

  STM32 boards:
   - Odyssey SOM board (STM32MP157CAC-based)
   - DH DRC02 board

  Toshiba SoCs/boards:
   - Visconti SoC and TPMV7708 board"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits)
  ARM: dts: nspire: Fix SP804 users
  arm64: dts: lg: Fix SP804 users
  arm64: dts: lg: Fix SP805 clocks
  ARM: mstar: Fix up the fallout from moving the dts/dtsi files
  ARM: mstar: Add mstar prefix to all of the dtsi/dts files
  ARM: mstar: Add interrupt to pm_uart
  ARM: mstar: Add interrupt controller to base dtsi
  ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
  arm64: dts: ti: k3-j7200-common-proc-board: Add USB support
  arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function
  arm64: dts: ti: k3-j7200-main: Add USB controller
  arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
  arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
  dt-bindings: ti-serdes-mux: Add defines for J7200 SoC
  ARM: dts: hisilicon: add SD5203 dts
  ARM: dts: hisilicon: fix the system controller compatible nodes
  arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
  arm64: dts: zynqmp: Remove undocumented u-boot properties
  arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
  arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml
  ...
 2020-10-24 10:44:18 -07:00
Linus Torvalds
1f70935f63 ARM: SoC fixes 
I had queued up a batch of fixes that got a bit close to the release for
 sending in before the merge window opened, so I'm including them in the
 batch of pull requests instead. They're mostly smaller DT tweaks and
 fixes, the usual mix that we tend to have through the releases.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TTg8PHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3kQUP/j1HTcEOghLsUPAiV+kz1qEWjS1tcm4/OV+b
 +Tp4pQh5Fy++iXS9yWmCgr/kMxJ4EQkCZERO+8a1VNBms/+0j3KiFuiGsZo0rKZU
 QdJvY3q8JYoLYdbyYJ8B7WAT6oS0giBoskGT6FRiwPC7uqM7va1KZOtNeESblt+6
 Ty4w5ognXbAvSLz+2VaTZTLbO7fbvd3oSwmbnN7n/qhoRPwaNExJHXTI057ekh4Y
 XqjGbYYTwY+Cdm8DkI1Dz2EPKegmSaVxS7+xzacNosx0559qe3pqrZ5OqrTui00Y
 /2T5caepAAjdEQsX6es2+mKRRXXWPRJMzHegv/mWvqJ68DPJZLgoHFcY2xy4cclr
 ALyc96rEbJTQw5jgoJO1waD6vMZOA7EqE3IXREtxcK8xYRvnK6Od8BJt7lCvB7jN
 Ws6U8udqPmeC+PUV9yhBhS8eR/S8MjeQfPK9h0xqqLEhHXqFTeqLHk3EompUaIsy
 BwPmPuZI7MBrtwXvrpbdd6I2iw/7XetIrtvSO6Z/d7iZYlf49WJhh6gBtPRnOKGX
 zOc90ohFjw/oMFoMpCHsXzyzrwtd/AUqEu/ZRV/yr4yvkpjfpwIRN/cTsN32nRYy
 Oi3BTSxow88U7CxZTwkWtwoB+alJ0ZKh3QeyLa/dwiMgj+eUc900kZLqroEMNXO1
 1JWG9qL4
 =tvbv
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "I had queued up a batch of fixes that got a bit close to the release
  for sending in before the merge window opened, so I'm including them
  in the merge window batch instead.

  Mostly smaller DT tweaks and fixes, the usual mix that we tend to have
  through the releases"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: iwg20d-q7-common: Fix touch controller probe failure
  ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails
  ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2
  soc: actions: include header to fix missing prototype
  arm64: dts: ti: k3-j721e: Rename mux header and update macro names
  soc: qcom: pdr: Fixup array type of get_domain_list_resp message
  arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells
  arm64: dts: qcom: kitakami: Temporarily disable SDHCI1
  arm64: dts: sdm630: Temporarily disable SMMUs by default
  arm64: dts: sdm845: Fixup OPP table for all qup devices
  arm64: dts: allwinner: h5: remove Mali GPU PMU module
  ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator
  soc: xilinx: Fix error code in zynqmp_pm_probe()
 2020-10-24 10:26:06 -07:00
Linus Torvalds
9ff9b0d392 networking changes for the 5.10 merge window 
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
 traversal in common container configs and improving TCP back-pressure.
 Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
 
 Expand netlink policy support and improve policy export to user space.
 (Ge)netlink core performs request validation according to declared
 policies. Expand the expressiveness of those policies (min/max length
 and bitmasks). Allow dumping policies for particular commands.
 This is used for feature discovery by user space (instead of kernel
 version parsing or trial and error).
 
 Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
 
 Allow more than 255 IPv4 multicast interfaces.
 
 Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
 packets of TCPv6.
 
 In Multi-patch TCP (MPTCP) support concurrent transmission of data
 on multiple subflows in a load balancing scenario. Enhance advertising
 addresses via the RM_ADDR/ADD_ADDR options.
 
 Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
 
 Allow more calls to same peer in RxRPC.
 
 Support two new Controller Area Network (CAN) protocols -
 CAN-FD and ISO 15765-2:2016.
 
 Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
 kernel problem.
 
 Add TC actions for implementing MPLS L2 VPNs.
 
 Improve nexthop code - e.g. handle various corner cases when nexthop
 objects are removed from groups better, skip unnecessary notifications
 and make it easier to offload nexthops into HW by converting
 to a blocking notifier.
 
 Support adding and consuming TCP header options by BPF programs,
 opening the doors for easy experimental and deployment-specific
 TCP option use.
 
 Reorganize TCP congestion control (CC) initialization to simplify life
 of TCP CC implemented in BPF.
 
 Add support for shipping BPF programs with the kernel and loading them
 early on boot via the User Mode Driver mechanism, hence reusing all the
 user space infra we have.
 
 Support sleepable BPF programs, initially targeting LSM and tracing.
 
 Add bpf_d_path() helper for returning full path for given 'struct path'.
 
 Make bpf_tail_call compatible with bpf-to-bpf calls.
 
 Allow BPF programs to call map_update_elem on sockmaps.
 
 Add BPF Type Format (BTF) support for type and enum discovery, as
 well as support for using BTF within the kernel itself (current use
 is for pretty printing structures).
 
 Support listing and getting information about bpf_links via the bpf
 syscall.
 
 Enhance kernel interfaces around NIC firmware update. Allow specifying
 overwrite mask to control if settings etc. are reset during update;
 report expected max time operation may take to users; support firmware
 activation without machine reboot incl. limits of how much impact
 reset may have (e.g. dropping link or not).
 
 Extend ethtool configuration interface to report IEEE-standard
 counters, to limit the need for per-vendor logic in user space.
 
 Adopt or extend devlink use for debug, monitoring, fw update
 in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
 mv88e6xxx, dpaa2-eth).
 
 In mlxsw expose critical and emergency SFP module temperature alarms.
 Refactor port buffer handling to make the defaults more suitable and
 support setting these values explicitly via the DCBNL interface.
 
 Add XDP support for Intel's igb driver.
 
 Support offloading TC flower classification and filtering rules to
 mscc_ocelot switches.
 
 Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
 fixed interval period pulse generator and one-step timestamping in
 dpaa-eth.
 
 Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
 offload.
 
 Add Lynx PHY/PCS MDIO module, and convert various drivers which have
 this HW to use it. Convert mvpp2 to split PCS.
 
 Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
 7-port Mediatek MT7531 IP.
 
 Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
 and wcn3680 support in wcn36xx.
 
 Improve performance for packets which don't require much offloads
 on recent Mellanox NICs by 20% by making multiple packets share
 a descriptor entry.
 
 Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
 subtree to drivers/net. Move MDIO drivers out of the phy directory.
 
 Clean up a lot of W=1 warnings, reportedly the actively developed
 subsections of networking drivers should now build W=1 warning free.
 
 Make sure drivers don't use in_interrupt() to dynamically adapt their
 code. Convert tasklets to use new tasklet_setup API (sadly this
 conversion is not yet complete).
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl+ItRwACgkQMUZtbf5S
 IrtTMg//UxpdR/MirT1DatBU0K/UGAZY82hV7F/UC8tPgjfHZeHvWlDFxfi3YP81
 PtPKbhRZ7DhwBXefUp6nY3UdvjftrJK2lJm8prJUPSsZRye8Wlcb7y65q7/P2y2U
 Efucyopg6RUrmrM0DUsIGYGJgylQLHnMYUl/keCsD4t5Bp4ksyi9R2t5eitGoWzh
 r3QGdbSa0AuWx4iu0i+tqp6Tj0ekMBMXLVb35dtU1t0joj2KTNEnSgABN3prOa8E
 iWYf2erOau68Ogp3yU3miCy0ZU4p/7qGHTtzbcp677692P/ekak6+zmfHLT9/Pjy
 2Stq2z6GoKuVxdktr91D9pA3jxG4LxSJmr0TImcGnXbvkMP3Ez3g9RrpV5fn8j6F
 mZCH8TKZAoD5aJrAJAMkhZmLYE1pvDa7KolSk8WogXrbCnTEb5Nv8FHTS1Qnk3yl
 wSKXuvutFVNLMEHCnWQLtODbTST9DI/aOi6EctPpuOA/ZyL1v3pl+gfp37S+LUTe
 owMnT/7TdvKaTD0+gIyU53M6rAWTtr5YyRQorX9awIu/4Ha0F0gYD7BJZQUGtegp
 HzKt59NiSrFdbSH7UdyemdBF4LuCgIhS7rgfeoUXMXmuPHq7eHXyHZt5dzPPa/xP
 81P0MAvdpFVwg8ij2yp2sHS7sISIRKq17fd1tIewUabxQbjXqPc=
 =bc1U
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...
 2020-10-15 18:42:13 -07:00
Linus Torvalds
b4e1bce85f Pin control bulk changes for the v5.10 kernel cycle 
Core changes:
 
 - NONE whatsoever, we don't even touch the core files this
   time around.
 
 New drivers:
 
 - New driver for the Toshiba Visconti SoC.
 
 - New subdriver for the Qualcomm MSM8226 SoC.
 
 - New subdriver for the Actions Semiconductor S500 SoC.
 
 - New subdriver for the Mediatek MT8192 SoC.
 
 - New subdriver for the Microchip SAMA7G5 SoC.
 
 Driver enhancements:
 
 - Intel Cherryview and Baytrail cleanups and refactorings.
 
 - Enhanced support for the Renesas R8A7790, more pins and
   groups.
 
 - Some optimizations for the MCP23S08 MCP23x17 variant.
 
 - Some cleanups around the Actions Semiconductor subdrivers.
 
 - A bunch of cleanups around the SH-PFC and Emma Mobile
   drivers.
 
 - The "SH-PFC" (literally SuperH pin function controller, I
   think) subdirectory is now renamed to the more neutral
   "renesas", as these are not very much centered around
   SuperH anymore.
 
 - Non-critical fixes for the Aspeed driver.
 
 - Non-critical fixes for the Ingenic (MIPS!) driver.
 
 - Fix a bunch of missing pins on the AMD pinctrl driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl+G8G0ACgkQQRCzN7AZ
 XXMAVw/+MBb0vaQKsD3ezoIeS6Pb8urDxnE7/A+IpU90coBFp+DbJIzTMbKhUb2L
 z72dAUB6zadQxPwruAt22TO81hmVwOGgqp6c/Z4G+BRDg9/GXVwEidnQqwXY7KWn
 zD0eJxzBxlXv76QHlJ2rT4YI9q2IhxAV1yIW638vsrLC+HZEnxKTL9U8Yx2f7ybq
 aCKPNPERo9oMIz+xuqpbHVeR2A2KpCAGRqCYw3Br+y4fnfkkEl7+0M5jKpBYU4yu
 NzTz7p0dlbeWEAhRMJCHx8wuSbV46k+AAjopJESMiaXlbS51cv+MF7p0NXhZHmNg
 ib6RivRZnQ2tFfznk9b6BXNywUGjUNUFWJrDrbDcbXR/k8XQtE+Hs6UQF1nuLWGS
 ZOppeFu2blJKyqFYMu4sT+d8fF7YNtU0TyVl2A60hg1Ef9ygGuiIASe9Pv2lgcRQ
 7M94yh264oc1yEF+IUi8VeMypVg9ckklNWzacQ6oritluTR8mTk1eAFqHATi7g3W
 4R3BSsBNtOySEoZS3I73HFdCuzBvXyfVTZz+iLAv2u9iVXd5kINhCxAFl9o2sEOH
 G6jvqxijP1hBQTCKyFGzNgHGGwsyvRYbMS9Oog1uKMTIk4yP0wy60LY7OE78HKKh
 uMOEbmE8bn8+oRl0z3QLttZssllFgYiruwNN2TGXUwBr868z+W0=
 =TdjX
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Core changes:

   - NONE whatsoever, we don't even touch the core files this time
     around.

  New drivers:

   - New driver for the Toshiba Visconti SoC.

   - New subdriver for the Qualcomm MSM8226 SoC.

   - New subdriver for the Actions Semiconductor S500 SoC.

   - New subdriver for the Mediatek MT8192 SoC.

   - New subdriver for the Microchip SAMA7G5 SoC.

  Driver enhancements:

   - Intel Cherryview and Baytrail cleanups and refactorings.

   - Enhanced support for the Renesas R8A7790, more pins and groups.

   - Some optimizations for the MCP23S08 MCP23x17 variant.

   - Some cleanups around the Actions Semiconductor subdrivers.

   - A bunch of cleanups around the SH-PFC and Emma Mobile drivers.

   - The "SH-PFC" (literally SuperH pin function controller, I think)
     subdirectory is now renamed to the more neutral "renesas", as these
     are not very much centered around SuperH anymore.

   - Non-critical fixes for the Aspeed driver.

   - Non-critical fixes for the Ingenic (MIPS!) driver.

   - Fix a bunch of missing pins on the AMD pinctrl driver"

* tag 'pinctrl-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (78 commits)
  pinctrl: amd: Add missing pins to the pin group list
  dt-bindings: pinctrl: sunxi: Allow pinctrl with more interrupt banks
  pinctrl: visconti: PINCTRL_TMPV7700 should depend on ARCH_VISCONTI
  pinctrl: mediatek: Free eint data on failure
  pinctrl: single: fix debug output when #pinctrl-cells = 2
  pinctrl: single: fix pinctrl_spec.args_count bounds check
  pinctrl: sunrisepoint: Modify COMMUNITY macros to be consistent
  pinctrl: cannonlake: Modify COMMUNITY macros to be consistent
  pinctrl: tigerlake: Fix register offsets for TGL-H variant
  pinctrl: Document pinctrl-single,pins when #pinctrl-cells = 2
  pinctrl: mediatek: use devm_platform_ioremap_resource_byname()
  pinctrl: nuvoton: npcm7xx: Constify static ops structs
  pinctrl: mediatek: mt7622: add antsel pins/groups
  pinctrl: ocelot: simplify the return expression of ocelot_gpiochip_register()
  pinctrl: at91-pio4: add support for sama7g5 SoC
  dt-bindings: pinctrl: at91-pio4: add microchip,sama7g5
  pinctrl: spear: simplify the return expression of tvc_connect()
  pinctrl: spear: simplify the return expression of spear310_pinctrl_probe
  pinctrl: sprd: use module_platform_driver to simplify the code
  pinctrl: Ingenic: Add I2S pins support for Ingenic SoCs.
  ...
 2020-10-14 15:25:04 -07:00
Claudiu Manoil
9fce74bf22 arm64: dts: fsl-ls1028a-rdb: Specify in-band mode for ENETC port 0 
As part of the transition of the enetc ethernet driver from phylib
to phylink, the in-band operation mode of the SGMII interface
from enetc port 0 needs to be specified explicitly for phylink.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2020-10-11 11:04:42 -07:00
Olof Johansson
098bfcec1b Visconti5 SoC changes for v5.10 (take two) 
- Add dt-bindings for Toshiba Visconti ARM SoCs
 - Add dt-bindings for the TMPV7708 RM main board
 - Add initial support for Toshiba Visconti platform
 - Add device tree for TMPV7708 RM main board
 - Add information for Toshiba Visconti ARM SoCs to MAINTAINERS
 - Enable configs for Toshiba Visconti to arm64's defconfig
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEXmKe5SMhlzV7hM9DMiR/u0CtH6YFAl9rBdkACgkQMiR/u0Ct
 H6bECxAAkoXu7alw5LqfyDkiOHKehMoKjLXYdIHANFii4+K/H+rkkwPoQS96rOPM
 N2rvXP4ddtbZto/gtiUk4rGBUFN/onH0uAVnewgspORKiV1fZSfJtOel+s5wZFmR
 YNpvPTlxnY2qh+fgf1RJdNdfI8Bg9ebKgPnO9m8gZO5lGBEAQCAkTALH+RoBb/Y0
 j/2/ZcGEb3A6V3tJu+lQNERdWurHhUAcdZ5q/N86APPe0TWf0zNOMeLc2cbeGihZ
 fRv9vbhZfO3b0XuEjYw2I5qAo80cubU/1m5z+YYzJFj1FBUKDHfcaVZevBvJu7Aa
 xvnb0MfAypw2zNpvdZEZw8iCNUEaWxgxwqsbFpr67eg4MXe2b8AFSS4oU1WGd07K
 Rnc24yG2r+AeRa8J+AYKTTDtpLOyogDWXSqba/GavbMQQ8VyTEt0e792fH5u8tCk
 MtCA3thXbNaRA3d8wL9S/RnGMyiXKoZqjRGBrdgSVGubw5qs6eNz/ZDH1ufoBBVA
 BEyrIXwBI4qg6j+Z+Bfr/e+MMOP5pcVEoFiGaVK0RMTTf4/F1PnVvk7yO9KN+LaA
 uRcUyh1OGKPh+7bPt6o2DGpq3sHiEPCH3y/TULhmbFP0GcOYcxGC6vddvSq4CGyb
 IcISu3JawgpL6h1W7HaSeK2ugPrutwgRagy0XlOiJOHVfT5HWas=
 =RVbA
 -----END PGP SIGNATURE-----

Merge tag 'visconti-initial-for-5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti into arm/dt

Visconti5 SoC changes for v5.10 (take two)

- Add dt-bindings for Toshiba Visconti ARM SoCs
- Add dt-bindings for the TMPV7708 RM main board
- Add initial support for Toshiba Visconti platform
- Add device tree for TMPV7708 RM main board
- Add information for Toshiba Visconti ARM SoCs to MAINTAINERS
- Enable configs for Toshiba Visconti to arm64's defconfig

* tag 'visconti-initial-for-5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti:
  arm64: defconfig: Enable configs for Toshiba Visconti
  MAINTAINERS: Add information for Toshiba Visconti ARM SoCs
  arm64: dts: visconti: Add device tree for TMPV7708 RM main board
  arm64: visconti: Add initial support for Toshiba Visconti platform
  dt-bindings: arm: toshiba: Add the TMPV7708 RM main board
  dt-bindings: arm: toshiba: add Toshiba Visconti ARM SoCs

Link: https://lore.kernel.org/r/20200923085236.4hu53gmnnmqkttuy@toshiba.co.jp
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-10-03 13:21:26 -07:00
Andre Przywara
c9794866ac arm64: dts: lg: Fix SP804 users 
Even though the SP804 binding allows to specify only one clock, the
primecell driver requires a named clock to activate the bus clock.

Specify the one clock three times and provide some clock-names, to
make the DT match the SP804 and primecell binding.
Also add the missing arm,primecell compatible string.

Link: https://lore.kernel.org/r/20200907121831.242281-4-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-10-03 12:56:46 -07:00
Andre Przywara
fc772314a3 arm64: dts: lg: Fix SP805 clocks 
The SP805 DT binding requires two clocks to be specified, but the two
LG platform DTs currently only specify one clock.

In practice, Linux would pick a clock named "apb_pclk" for the bus
clock, and the Linux (and U-Boot) SP805 driver would use the first clock
to derive the actual watchdog counter frequency.

Since currently both are the very same clock, we can just double the
clock reference, and add the correct clock-names, to match the binding.

Link: https://lore.kernel.org/r/20200907121831.242281-6-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-10-03 12:56:03 -07:00
Olof Johansson
02d0bf1ae8 arm64: soc: ZynqMP DT changes for v5.10 
- Fix IRQ flag for PMIC
 - Align gpio hogs and leds with naming convention
 - Rename busses to match DT schema
 - Tune i2c cadence compatible string
 - Remove undocumented u-boot properties
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX3MfRAAKCRDKSWXLKUoM
 IYrOAJ9Rmw076IwypgsJ4q/t9KvAn3dXSQCfffGvvHE8+rI8ZozVZ+IoSxaL9S0=
 =qHTW
 -----END PGP SIGNATURE-----

Merge tag 'zynqmp-dt-for-v5.10' of https://github.com/Xilinx/linux-xlnx into arm/dt

arm64: soc: ZynqMP DT changes for v5.10

- Fix IRQ flag for PMIC
- Align gpio hogs and leds with naming convention
- Rename busses to match DT schema
- Tune i2c cadence compatible string
- Remove undocumented u-boot properties

* tag 'zynqmp-dt-for-v5.10' of https://github.com/Xilinx/linux-xlnx:
  arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
  arm64: dts: zynqmp: Remove undocumented u-boot properties
  arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
  arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml
  arm64: dts: xilinx: align GPIO hog names with dtschema
  arm64: dts: zynqmp-zcu100-revC: correct interrupt flags
  arm64: dts: xilinx: Align IOMMU nodename with dtschema
  arm64: dts: zynqmp: Add GTR transceivers

Link: https://lore.kernel.org/r/37a0333b-541e-649c-68c5-aa4b52e6b91d@monstr.eu
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-10-03 12:43:27 -07:00
Olof Johansson
a3ca4b5e92 Actions Semi ARM64 DT for v5.10: 
- Fix the memory region used by pinctrl and sps drivers on the S700 SoC.
   The issue is fixed by limiting the address space used by pinctrl driver.
   In hardware these two are separate subsystems but the hw engineers somehow
   merged the registers space into one. So we now limit the address space with
   appropriate offsets for the two drivers.
 
 - Add DMA controller support for S700 SoC. The relevant driver changes are
   picked up by DMA Engine mainatainer. The DMA on this SoC can be used for
   mem-to-mem and mem-to-peripheral transfers.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAl9psSsACgkQVZ8R5v6R
 zvXpIwf/aPOv832RfHqYe+Skq0TujFNno3AocCsZpHiy1BS9JoaKVBw9O4EecZhu
 aWTag7hubNF8XcEE4dZWSwxkl0DNlpdWvRZNbbS/X6KUoS3lNwkVq4nuN2RXgw0p
 bUoKuHSpVHSj667+/h+VuslqX0Ef6CAy4pmg6qaCpIlWCYzLX1hQ41pLNtDy0tNp
 39d8yjCdbA6ye9vtgemzLqY0GvPs8GS7dDQbGdIhKPiGJOVoxMCsLV48yfhE9JQF
 6y7ZMYvYU6oadS5SdLa8IhC9MzZ80MK9cxz9ve3r6Svznv2Ue0mqkfLJXRA1j8gs
 6Yg1fecxMQvx75dNMcQvB6eM9r4rOw==
 =R/29
 -----END PGP SIGNATURE-----

Merge tag 'actions-arm64-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt

Actions Semi ARM64 DT for v5.10:

- Fix the memory region used by pinctrl and sps drivers on the S700 SoC.
  The issue is fixed by limiting the address space used by pinctrl driver.
  In hardware these two are separate subsystems but the hw engineers somehow
  merged the registers space into one. So we now limit the address space with
  appropriate offsets for the two drivers.

- Add DMA controller support for S700 SoC. The relevant driver changes are
  picked up by DMA Engine mainatainer. The DMA on this SoC can be used for
  mem-to-mem and mem-to-peripheral transfers.

* tag 'actions-arm64-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
  arm64: dts: actions: Add DMA Controller for S700
  arm64: dts: actions: limit address range for pinctrl node

Link: https://lore.kernel.org/r/20200922114030.GC11251@Mani-XPS-13-9360
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-10-03 12:36:28 -07:00
Olof Johansson
2494ad156d Our usual bunch of patches to support the Allwinner SoCs, this time 
adding:
   - Allwinner A100 initial support
   - Mali, DMA, cedrus and IR Support for the R40
   - Crypto support for the v3s
   - New board: Allwinner A100 Perf1
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX2jL0QAKCRDj7w1vZxhR
 xZNsAQDAHtwf/iPHoTuMw9Gz4bqPifvR1L4+aatT1YuHrksd7wD/Y/OLntePJ97I
 K+UKZf2bqDOf1RzUIIMiKJe3x/5NrQM=
 =Ejn3
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-dt-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
  - Allwinner A100 initial support
  - Mali, DMA, cedrus and IR Support for the R40
  - Crypto support for the v3s
  - New board: Allwinner A100 Perf1

* tag 'sunxi-dt-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (24 commits)
  ARM: dts: sun8i: v3s: Enable crypto engine
  dt-bindings: crypto: Add compatible for V3s
  dt-bindings: crypto: Specify that allwinner, sun8i-a33-crypto needs reset
  arm64: dts: allwinner: a64: Update the audio codec compatible
  arm64: dts: allwinner: a64: Update codec widget names
  ARM: dts: sun8i: a33: Update codec widget names
  ARM: dts: sun8i: r40: Add video engine node
  ARM: dts: sun8i: r40: Add node for system controller
  dt-bindings: sram: allwinner, sun4i-a10-system-control: Add R40 compatibles
  ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable IR
  ARM: dts: sun8i: r40: Add IR nodes
  dt-bindings: media: allwinner, sun4i-a10-ir: Add R40 compatible
  ARM: dts: sun8i: r40: Add DMA node
  dt-bindings: dma: allwinner,sun50i-a64-dma: Add R40 compatible
  arm64: allwinner: A100: add support for Allwinner Perf1 board
  dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings
  arm64: allwinner: A100: add the basical Allwinner A100 DTSI file
  dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller
  dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi
  ARM: dts: sun4i: Enable HDMI support on the Mele A1000
  ...

Link: https://lore.kernel.org/r/ac39ee89-ea3a-4971-8cd7-8c4b2ecef39d.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-10-03 12:34:02 -07:00
Olof Johansson
ef3c139ba0 Second and final device tree updates towards 5.10-rc1 for TI K3 platform. 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAl93K8EACgkQ3bWEnRc2
 JJ1hhQ/+Kaak1RosL3a0AZ4tBPAkWm/CVduyKOxLZahBfHzD2pZkHhKyfwGBRFOn
 CoLCMTMrY19xnOkUYzUTu5bkoxvLI1YuAkvYG/Sx6yBZU4ImTlVpzmmkeE4nJYBI
 X8Z+oysSx7kgTVxmPbweDPVtUJ99G4yhWNlFp+v2rfWM+mCK6d6ELZkkJVQBS18l
 iD8rYlL9885CsowILycWGZ855z59DLxeIqy52K62+rhDaOgYz56ZnNYhWg+5RDPB
 ZOAvXhtMJHVUekorqD6i9FQqWfVda0rTR+KiDz4UBn8NLyFmmGbArl3bQ4CMg9+q
 Chm6Ri9f46uZYZU9bNny9rZtYfu5z6rvAS+kDaq3BwumMcSdy/ULjgP8UR0XJfHS
 sLWw1OmDHYf7V9YUXxKemSwySCKVbgoIwzZPu006fNovXKETsTi/Hu70EWEepkRF
 aLnjLqSxNBkdwQYy04bSzchPOaHLWWBNAczWABAQvg6pRvTQbK6+mGHnTheIM5Ve
 GH/qeVNWdhurVXlm76i8bHS7oBTfSSia2VVKZSuQOplruwjC8DHKkTeaMxDtXieX
 1qGfT6jimkduTmzzW+u7OMc4TsP/PCsaFh5qk7QrmqvrXhQWJouCOuso/7LyTwqK
 4rAN0LSq1kosDFjKCeEBsJ6uhc85DjNBYVFfftvhZDN2tFwJNr0=
 =tuvx
 -----END PGP SIGNATURE-----

Merge tag 'ti-k3-dt-for-v5.10-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt

Second and final device tree updates towards 5.10-rc1 for TI K3 platform.

* tag 'ti-k3-dt-for-v5.10-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (23 commits)
  arm64: dts: ti: k3-j7200-common-proc-board: Add USB support
  arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function
  arm64: dts: ti: k3-j7200-main: Add USB controller
  arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
  arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
  dt-bindings: ti-serdes-mux: Add defines for J7200 SoC
  arm64: dts: ti: k3-j721e-common-proc-board: align GPIO hog names with dtschema
  arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and SD card
  arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodes
  arm64: dts: ti: k3-j7200-som-p0: Add HyperFlash node
  arm64: dts: ti: k3-j7200-mcu-wakeup: Add HyperBus node
  arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders
  arm64: dts: ti: k3-j7200: Add I2C nodes
  arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux and phy defs
  arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node
  arm64: dts: ti: k3-j7200-main: add main navss cpts node
  arm64: dts: ti: k3-j7200: add DMA support
  arm64: dts: ti: Add support for J7200 Common Processor Board
  arm64: dts: ti: Add support for J7200 SoC
  dt-bindings: arm: ti: Add bindings for J7200 SoC
  ...

Link: https://lore.kernel.org/r/20201002134559.orvmgbns57qlyn3i@akan
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-10-03 12:16:18 -07:00
Roger Quadros
bbcb0522ae arm64: dts: ti: k3-j7200-common-proc-board: Add USB support 
The board uses lane 3 of SERDES for USB. Set the mux
accordingly.

The USB controller and EVM supports super-speed for USB0
on the Type-C port. However, the SERDES has a limitation
that upto 2 protocols can be used at a time. The SERDES is
wired for PCIe, QSGMII and USB super-speed. It has been
chosen to use PCI2 and QSGMII as default. So restrict
USB0 to high-speed mode.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-7-rogerq@ti.com
 2020-09-30 07:34:03 -05:00
Kishon Vijay Abraham I
e38a45b019 arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function 
First two lanes of SERDES is connected to PCIe, third lane is
connected to QSGMII and the last lane is connected to USB. However,
Cadence torrent SERDES doesn't support more than 2 protocols
at the same time. Configure it only for PCIe and QSGMII.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-6-rogerq@ti.com
 2020-09-30 07:34:03 -05:00
Roger Quadros
6197d7139d arm64: dts: ti: k3-j7200-main: Add USB controller 
j7200 has on USB controller instance. Add that.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-5-rogerq@ti.com
 2020-09-30 07:34:03 -05:00
Roger Quadros
9a09e6e9cf arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX 
The USB controller can be connected to one of the 2 lanes
of SERDES0 using a MUX. Add a MUX controller node for that.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-4-rogerq@ti.com
 2020-09-30 07:34:02 -05:00
Roger Quadros
1509295295 arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux 
The SERDES lane control mux registers are present in the
CTRLMMR space.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-3-rogerq@ti.com
 2020-09-30 07:34:02 -05:00
Nishanth Menon
ffb0024ecd Tag fix up for TI serdes mux definition introduced in 5.9 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAl9onNQACgkQ3bWEnRc2
 JJ3YIw//VzEDb1AlwT40/LMd5i1wWP3mVbRf3oQMGHh0PXW8nM/OA1mD4f0br38e
 /32TeQvF9GsImQF2aUI2vN07cjZFKu3bm8vNmxdPIlQM/tZlL4lfiZAjVrQtc9XH
 +O2z0Y7/3MMf5mJe/kDD0AtTqcIk9nUH0bg8A+teN8QTl+cy/CAmzTbK5oEB6pYy
 08zJlgZBqm4pbeSG4VZyfoTDRwSMg5LyGCG9Z5LgE8fjW9evIqnDJOoErsU+pZZr
 o/SWIQSWFi+Q82OsBuq3OrSwxwAsRI6T7rADcnrwJEFY6G9K+7GCxlYmgX8fq+Y0
 OzIkMce/vmWp4wJ6z2OUbe36Ujvp/rdjhqFFCHuG0rr4czVGF5QKNokqP3BdZGQh
 5IXvDXxMEJZlizNwyUyrruI4D4fLenpbudvOG7IJ+TtSJGNxp04gXda766M1B5+S
 iz4HSnhLq2oNYTyYotcpXeO/p47vuf+ZX258yxtgeMxpsG+nw5FTE1zPcRmNWnMj
 7KVKyXrv/7aPlsoWyREQ4K7olDhiFqF7iLgvrqwuQzvOBwxV+5BeYlXT8JMjApQV
 Jm4evbZYI6Qs1gUWU6NvjHymQT9AHeA0da1AharGEBbGDY5nvepAyn0fTcvO3IwJ
 jpOSQa+OOlJok3nJy9SaNimQScwNogLsxvHHvWc7lsXmIMbOQSE=
 =rVCz
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAl90exgACgkQ3bWEnRc2
 JJ1txw//aYUykQ5kVn9amnpLFiqU6kgXSgKXJ1VsD4tZg6SSzCb1Oaf77OrNf5MW
 6kSUIk+gED1UoxZHtwGup05WemOzLwOjStC4a4pa8NC5wJNL62eUkgYGCezJhs5j
 GgqrXV0IA2UbpyV5Sgns/4VYWiBArjdIDgs7t+ERoEmt/DvLykwdFAc2u3cA9pxW
 NXa0hDjW6Ff2Y6K6Owq8+rJxz9hzVkGBVFKnWSKNzZqUBSXGLE5lJmXwbn5r0clz
 KK7bN/4trrGRHYFUIWw4jMtg1h6E8pfOhoJ1Y0hTluFrpUwm37wRLW4LntmuawYD
 +upWZsp2GRLFFqzn+NQxCsDLBQDukfYa4nq7Ptv2sGSmvhBvLyTdKxzwTFm6fFEq
 SD4DLXLyDS/s09Ugc1TmIq0FQh1f3xEN+duOco7qA6ePCiy7Axx5CJT/tSR051dS
 bmqmyM0R65zynFXvKRE2CCPZ2Rpxkqxk8FLFsNh8AtO9d/8aJc7em5JoZF8F9OoC
 9Rt3ixNP6Ny4Ya+i2OvW1IOFG+Z9A/cjPFhIQXI+S2HRMGGIAqmWGDivrKVQYMpO
 jLlKxa0prEm/zoihKaTz/WJhR5dMoEY8bsCdAxvrq9Ygd+g1HKkMkvDcqrs778qu
 KveMv39/6cei1zJ89bp+fFn6QW6JCaa05gKympNDc/YnrlRE5kc=
 =Hm9M
 -----END PGP SIGNATURE-----

Merge tag 'ti-k3-dt-fixes-for-v5.9' into ti-k3-dts-next

Merge fix up for TI serdes mux definition introduced in 5.9 as
dependency for 5.10 series on J7200 USB.

Signed-off-by: Nishanth Menon <nm@ti.com>
 2020-09-30 07:32:50 -05:00
Michal Simek
9a19a39ee4 arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 
Fix the leds subnode names to match (^led-[0-9a-f]$|led).

Similar change has been also done by commit 08dc0e5dd9 ("arm64: dts:
meson: fix leds subnodes name").

The patch is fixing this warning:
avnet-ultra96-rev1.dt.yaml: leds: 'ds2', 'ds3', 'ds4', 'ds5' do not match
any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1a69c3fa0291f991ffcf113ea222c713ba4d4ff0.1598264917.git.michal.simek@xilinx.com
 2020-09-29 13:01:20 +02:00
Michal Simek
db7691f958 arm64: dts: zynqmp: Remove undocumented u-boot properties 
u-boot, DT properties are not documented anywhere in Linux DT binding
that's why remove them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/8ba339425b9c9f319bdedce7741367055a30713c.1598257720.git.michal.simek@xilinx.com
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
 2020-09-29 13:00:19 +02:00
Michal Simek
35292518cb arm64: dts: zynqmp: Remove additional compatible string for i2c IPs 
DT binding permits only one compatible string which was decribed in past by
commit 63cab195bf ("i2c: removed work arounds in i2c driver for Zynq
Ultrascale+ MPSoC").
The commit aea37006e1 ("dt-bindings: i2c: cadence: Migrate i2c-cadence
documentation to YAML") has converted binding to yaml and the following
issues is reported:
...: i2c@ff030000: compatible: Additional items are not allowed
('cdns,i2c-r1p10' was unexpected)
	From schema:
.../Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml fds
...: i2c@ff030000: compatible: ['cdns,i2c-r1p14', 'cdns,i2c-r1p10'] is too
long

The commit c415f9e830 ("ARM64: zynqmp: Fix i2c node's compatible string")
has added the second compatible string but without removing origin one.
The patch is only keeping one compatible string "cdns,i2c-r1p14".

Fixes: c415f9e830 ("ARM64: zynqmp: Fix i2c node's compatible string")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/cc294ae1a79ef845af6809ddb4049f0c0f5bb87a.1598259551.git.michal.simek@xilinx.com
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
 2020-09-29 12:59:23 +02:00
Michal Simek
dfff9066e6 arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml 
Rename amba-apu and amba to AXI. Based on Xilinx ZynqMP TRM (Chapter 15)
chip is "using the advanced eXtensible interface (AXI) point-to-point
channels for communicating addresses, data, and response transactions
between master and slave clients."

Issues are reported as:
...: amba: $nodename:0: 'amba' does not match
'^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
	From schema: .../dt-schema/dtschema/schemas/simple-bus.yaml
...: amba-apu@0: $nodename:0: 'amba-apu@0' does not match
'^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
	From schema: .../dt-schema/dtschema/schemas/simple-bus.yaml

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/68f20a2b2bb0feee80bc3348619c2ee98aa69963.1598263539.git.michal.simek@xilinx.com
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
 2020-09-29 12:58:38 +02:00
Krzysztof Kozlowski
cbf5a878ae arm64: dts: xilinx: align GPIO hog names with dtschema 
The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200916155715.21009-8-krzk@kernel.org
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
 2020-09-29 12:54:36 +02:00
Olof Johansson
f75ff2c7bc mt8173: 
- make nor flash work
 - fix da9211 regulator modes
 
 mt8183:
 - add support for system companion processor
 
 mt8516:
 - set reset gpio for gpio expander in pumpkin board
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAl9uC+IXHG1hdHRoaWFz
 LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH7c3w/+L6fmP/VXGl89AN7JG3J+45yo
 WCyjT+JnQIOvI38o6ueGet/I5M6uFNC3wLM9VKa3/9Jj8fxJuSpQQzxBojwKwEHG
 hqBUVlhC12WdHLtf15fulwmkuXOi731NbnRW6/lBWZ2dW8ZNqxRu7T5kRGuWgokk
 Uoo38SI81xFBaOBkYZy4S+MEZIWFsvD4wxehJKkb+yT+IRXEYUA8zGbzznLKnojQ
 XUMuGaoB6uJiW2dme19pwj0AeG/maYuD6XkOEqY6YHaF7GCY9dk+xBiys581M5wn
 2/XpLoZu1jPQkPOlylwl5zc0TbVbZuqpESOVoCotSz+tO6OekNQQ8gouGzGjRU45
 fZtVKI9M8hl4NKldtnPoqykGLnfgveFNu0Kz0sQ8t47JWP4y/lKnusRxsWptWpe/
 RlKPHq/Hkg7yMEXsQoiOwGy4gOe5+2p29H4G/GcsRjY0fEaqs8s9mtwaYTzc4Wi6
 TsI0FTudmp9BenCKLmctt3Cbp5VASN+pXMfZm5mXudC1CloLxMqDw5Ny0duKvxJ0
 innCl38E4UpmTPBjsxdJ3UU7gJJjMwZas8oKsBkNBP7xbEKA1EqfX37Pg3TUBGJf
 sSY+UYWfhkYNtqSTXj/7uRvo1YRD3LZbt0QBNtDok3BxbExv695AWe3rRkKSkmiU
 tYYVlX0N76LXsJ3sCSk=
 =hAPZ
 -----END PGP SIGNATURE-----

Merge tag 'v5.9-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt8173:
- make nor flash work
- fix da9211 regulator modes

mt8183:
- add support for system companion processor

mt8516:
- set reset gpio for gpio expander in pumpkin board

* tag 'v5.9-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: mt8183: update watchdog device node
  arm64: dts: mt8173: elm: Fix nor_flash node property
  arm64: dts: mediatek: fix tca6416 reset GPIOs in pumpkin
  arm64: dts: mt8183: add scp node
  arm64: dts: mt8173-elm: fix supported values for regulator-allowed-modes of da9211

Link: https://lore.kernel.org/r/1580bc76-b05a-ad29-1854-d2aca657c775@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 10:23:59 -07:00
Olof Johansson
9289beb8eb arm64: dtc: amlogic updates for v5.10 
- new boards: libretch s905x cc v2, Hardkernel ODROID-N2+
 - vim3: sound updates
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl9t/bwACgkQWTcYmtP7
 xmX/kg//Sk4td4460YcVXrkNJCZ5m7PXiOlJ/ATVz2pv8lb+bf7bOkYWR+pUyxv0
 FERntgCgH8BlY+omNVRq3EduVjaaoeilKwCuaHgbGExy20dRLh8BhiYCqRKADnL5
 dJ59HKntHh6S/7NbooYRgSdlE2uAmt2hdQx7mtJQZNlTraRCXs/NP3WmBrmOLbjS
 1CDLk7iG0S7b6McsNwZnWje6aV01g53599aM1WRKgNbNl7hafnpTB3YB+IdI0wwK
 k1hX1ma77TmwXTk2CuSZh2rL0k22Gqd6kzMnH1x5rvSwhhpARDoqMDqCGTrcqbqJ
 Ziy8EXaVT/S8NkcPbdGQtu6vwlXjBskSA5bEqNylCdkpsghukbXTMug5fw3ftVWZ
 s67Vw/fFGEnzSINJ8uVQxMT6dkKRjkvSIYgukaAQG8Ni+xqfZfulbHkgo5HdVNvt
 8YlgbhOx4dmPvZLvkjP3mzlaoZbPt2Fg+4XVPtHyXjK52ppjt08xzZ2xscq0APNG
 G/eF2+treEn305I3kmOK0flrPelpOy6BVcB6lyK6L3DsGYb/hoGI/55y0JvGFxwp
 j0i59X1b9LrBmxi8C96x5dQSzrzprnj6sI1aaTsereAJyuA6rZ6B+nN9bzj1Xfk+
 7/RsXzSJ/gkOudDgFFyjML8IqXhlhQull0y5+iiDib7vQ1XS/9A=
 =vrF9
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dtc: amlogic updates for v5.10
- new boards: libretch s905x cc v2, Hardkernel ODROID-N2+
- vim3: sound updates

* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson: initial support for aml-s905x-cc v2
  dt-bindings: arm: amlogic: add support for libretch s905x cc v2
  arm64: dts: meson: add support for the ODROID-N2+
  dt-bindings: arm: amlogic: add support for the ODROID-N2+
  arm64: dts: meson: convert ODROID-N2 to dtsi
  arm64: dts: meson: vim3l: remove sound card definition
  arm64: dts: meson: vim3: make sound card common to all variants
  arm64: dts: meson: vim3: correct led polarity

Link: https://lore.kernel.org/r/7h3636kjxd.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 10:23:18 -07:00
Olof Johansson
a1c259cdb0 Qualcomm ARM64 DT updates for v5.10 
Cleanup, refactor and modernize MSM8916 by sorting nodes, moving device
 and platform specific parts to their respective files, add and use
 labels for reference nodes and use IRQ defines. Migrate TCSR mutex off
 the depricated binding, add resin node for PM8916.
 
 Add LPASS clock controller for SC7180. Fix the LLCC reg, increase
 interconnect-cells, drop flags on MDSS irqs. Add interconnects for
 display, eMMC and SD-card, specify 'sustainable_power' for CPU thermal
 zones, improve pinconf states related to UART and Bluetooth. Add new DT
 for Lazor and Trogdor.
 
 Increase #interconnect-cells for SDM845 to allow tags, add OPP tables
 and power-domains for Venus and interconnects for display. Fix the ports
 on the HDMI nodes for DB845c and add DT for the Xiaomi Poco F1.
 
 Add interconnect providers, fix up primary USB's clock and use
 dt-binding defines for GPU clocks on SM8150.
 
 Add interconnect providers, CPUfreq, thermal configuration and missing
 uarts for SM8250. Fix up naming of debug uart, add always-on supply
 clock to gcc, fix up the sleep clock rate and define OPP tables for all
 QUP devices. Then add a new DeviceTree for the QRB5165 RB5 board.
 
 Enable watchdog on IPQ8074 and use the appropriate compatible for the
 PMU node. Enable DVFS support for IPQ6018.
 
 Finally correct the spelling of "interrupts" in MSM8992 uart node, fix
 missing # in PM660 #interrupt-cells, add second VFE power-domain to
 camss in MSM8996 and sort the Makefile.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl9sGmAbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3F7n4QANwKflwOuE+KDK5/SCNb
 T7xYWw8ZV1GylHh3E52I42EmpkNDojepBUcjGMy+CZecZzD6cmivKRPu//X6GYzE
 MCE+1Z6pUugiDFpcQ2xuY62H1nw+52FeiF9Ze9lITvsKv6nGb+9iVjwU34PXGxuj
 uzUCTwqjF/At52zEO+nU0GoN51r3KZgnQEaI/dgTiSV5m0mb8eIG29oq0qB7RTno
 mcM8SWcewUHJOJP0/MzdFVE1Vp1MyiL5U7ilKKCCBg5U2Jwzif7Ugv5ZqR3wQ1vD
 I3Si9WaLechmCUPWsc6xuysreIdzUrWg37gL+FUdWLj+eWQw6NWjdJDZQM/Zr1DC
 XLxHYVliVr164XwTbZOR+JjaJKBOd1b399N8PKGaDYmlHZqP4L81LbfNvB3rkH2o
 Y1NuKksicUWt9E6+tAIIceBxBbUW4T2z4FEqwd4edFYxknAk/kr0iVT796Unv9lT
 mcsZW7zjN7ob1hqRlUNgPk/u8zASz0/7kGTEyJAbf8Q8MsJSkqvteJpFo0xcVM0W
 ty0sC8g7yGgEkuz9Ou5KIXT/5ulinhR+NjoBi1bG8mtgkDnw4k2hyEIpNbuWx5iP
 7CjM5ECDV5DK+Q1IXLDyQfrpUIRs9u9QOhoGuNvEztl9q/irJo26m0EEUrIoEgMI
 mH/AQkwMrY2x9aXGhtAjOxW9
 =yiGd
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DT updates for v5.10

Cleanup, refactor and modernize MSM8916 by sorting nodes, moving device
and platform specific parts to their respective files, add and use
labels for reference nodes and use IRQ defines. Migrate TCSR mutex off
the depricated binding, add resin node for PM8916.

Add LPASS clock controller for SC7180. Fix the LLCC reg, increase
interconnect-cells, drop flags on MDSS irqs. Add interconnects for
display, eMMC and SD-card, specify 'sustainable_power' for CPU thermal
zones, improve pinconf states related to UART and Bluetooth. Add new DT
for Lazor and Trogdor.

Increase #interconnect-cells for SDM845 to allow tags, add OPP tables
and power-domains for Venus and interconnects for display. Fix the ports
on the HDMI nodes for DB845c and add DT for the Xiaomi Poco F1.

Add interconnect providers, fix up primary USB's clock and use
dt-binding defines for GPU clocks on SM8150.

Add interconnect providers, CPUfreq, thermal configuration and missing
uarts for SM8250. Fix up naming of debug uart, add always-on supply
clock to gcc, fix up the sleep clock rate and define OPP tables for all
QUP devices. Then add a new DeviceTree for the QRB5165 RB5 board.

Enable watchdog on IPQ8074 and use the appropriate compatible for the
PMU node. Enable DVFS support for IPQ6018.

Finally correct the spelling of "interrupts" in MSM8992 uart node, fix
missing # in PM660 #interrupt-cells, add second VFE power-domain to
camss in MSM8996 and sort the Makefile.

* tag 'qcom-arm64-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (75 commits)
  arm64: dts: qcom: sm8250: Add thermal zones and throttling support
  arm64: dts: qcom: sm8250: Add cpufreq hw node
  arm64: dts: qcom: sdm845: Add interconnects property for display
  arm64: dts: qcom: sm8250: Add EPSS L3 interconnect provider
  arm64: dts: qcom: sm8150: Add OSM L3 interconnect provider
  arm64: dts: qcom: sm8250: add interconnect nodes
  arm64: dts: qcom: sm8150: add interconnect nodes
  arm64: dts: qcom: sc7180: Increase the number of interconnect cells
  arm64: dts: qcom: sdm845: Increase the number of interconnect cells
  arm64: dts: qcom: Makefile: Sort lines
  arm64: dts: qcom: pm8916: Sort nodes
  arm64: dts: qcom: msm8916: Sort nodes
  arm64: dts: qcom: msm8916: Pad addresses
  arm64: dts: qcom: msm8916: Rename "x-smp2p" to "smp2p-x"
  arm64: dts: qcom: msm8916: Use more generic node names
  arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS
  arm64: dts: qcom: msm8916: Minor style fixes
  arm64: dts: qcom: msm8916: Drop qcom,tcsr-mutex syscon
  arm64: dts: qcom: msm8916: Use IRQ defines, add IRQ types
  arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts
  ...

Link: https://lore.kernel.org/r/20200924040607.180039-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 10:21:23 -07:00
Olof Johansson
99bf15c707 New boards NanoPi R2S, A95X-Z2 and more Rock-Pi4 variants. 
Khadas-edge additions and a some fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl9ryD0QHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgU20CACU6tSCmlWEQ2dK3KLavODfcs2GvBpNlUA9
 xfoSmMcVbiFosmO7t9gSbJHkIqadMaU/XDZWU/aIcnnPffX3YnCSqRiRWmtw05PG
 7kBwHgPOqWhNc9fB7saj/sxth39V/7WKl3qwGuEPUZSDPJ/ZO9008vM0d6kbIQbA
 ubZqFZA3fM847Ej5LJgJ1yY2adYPYL5b43b5y6H5Us1nXPt5ONHrSoLhLLeoCVk8
 Ds+UdkLeu7zy2fDN4V6jhkEVFPgG2yq+xeDudIsFk1WXWsB7lO8yGdhPwfOrRire
 fsK3dGyO8dKvc8rhshTYwEPyJchrIIQsJFdqLBbVKeVW2mHxKtjC
 =WETP
 -----END PGP SIGNATURE-----

Merge tag 'v5.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

New boards NanoPi R2S, A95X-Z2 and more Rock-Pi4 variants.
Khadas-edge additions and a some fixes.

* tag 'v5.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: add ir-receiver node to rk3399-khadas-edge
  arm64: dts: rockchip: add spiflash node to rk3399-khadas-edge
  arm64: dts: rockchip: Add support for FriendlyARM NanoPi R2S
  dt-bindings: Add doc for FriendlyARM NanoPi R2S
  arm64: dts: rockchip: replace status value "ok" by "okay"
  arm64: dts: rockchip: fix cpu-supply for rk3328-evb
  arm64: dts: rockchip: add rk3318 A95X Z2 board
  dt-bindings: arm: rockchip: add Zkmagic A95X Z2 description
  dt-bindings: Add vendor prefix for Shenzhen Zkmagic Technology Co., Ltd.
  arm64: dts: rockchip: Add Radxa ROCK Pi 4C support
  arm64: dts: rockchip: Add Radxa ROCK Pi 4B support
  arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts
  dt-bindings: arm: rockchip: Update ROCKPi 4 binding
  arm64: dts: rockchip: change spdif fallback compatible on rk3308
  arm64: dts: rockchip: Fix power routing to support POE on rk3399-roc-pc

Link: https://lore.kernel.org/r/16010805.MhVyP8KKtY@diego
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 10:18:13 -07:00
Olof Johansson
5f7067bc3a i.MX arm64 device tree change for 5.10: 
- New board/device support: Librem 5 phone, i.MX8MM DDR4 EVK, Variscite
   VAR-SOM-MX8MN SoM and Symphony board.
 - Add NWL MIPI DSI controller support for i.MX8MQ.
 - Several series from Krzysztof Kozlowski to clean and fix up i.MX8
   based device trees according to DT schema.
 - A series from Michael Walle to add sl28cpld support for Kontron sl28
   device based on LS1028A.
 - Add two parameters for Samsung picophy tuning on imx8mm-evk and
   imx8mn-evk boards.
 - Add more thermal zones for Layerscape SoCs.
 - Various random update and minor fix-ups.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl9q8W0UHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM4AhQf+L6avHelgOvIbZFqv3EJEPsCZgTzQ
 ryXDfdC+x5tpWWdd2ulu3XevaNSWpDwrmmNEKr0jqehsRDQz/Q+/H13DZgz9qALy
 4vWyd6eY16pY38bTHC+Bf57LsC5scbpwkt/2gdy2oh73p4R0GwrBNp2CLo9ATduw
 QoVY9+5AOCilinI0Smqg/a2o1UeDoUSwzfnlEwA6hlx5cR7mla5wM6mRX8DNaFO3
 zEes8mpLaWfxWw256NPMUL9RTgVTaAPaR/hboN3DYjoUDSinv+5zxKbJDMavG5Ok
 1uG/T0g+XbvQJbOz1CDI4gI0tRgqWAJMtYCjH62m6DXBmajOaUcHi/Il7A==
 =XIpX
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt64-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree change for 5.10:

- New board/device support: Librem 5 phone, i.MX8MM DDR4 EVK, Variscite
  VAR-SOM-MX8MN SoM and Symphony board.
- Add NWL MIPI DSI controller support for i.MX8MQ.
- Several series from Krzysztof Kozlowski to clean and fix up i.MX8
  based device trees according to DT schema.
- A series from Michael Walle to add sl28cpld support for Kontron sl28
  device based on LS1028A.
- Add two parameters for Samsung picophy tuning on imx8mm-evk and
  imx8mn-evk boards.
- Add more thermal zones for Layerscape SoCs.
- Various random update and minor fix-ups.

* tag 'imx-dt64-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (71 commits)
  arm64: dts: imx8mq-librem5: correct GPIO hog property
  arm64: dts: imx8mm-var-som-symphony: Drop wake-up source from RTC
  arm64: dts: imx8mq: correct interrupt flags
  arm64: dts: imx8mn: correct interrupt flags
  arm64: dts: imx8mm: correct interrupt flags
  arm64: dts: imx8mm-var-som-symphony: fix ptn5150 interrupts
  arm64: dts: layerscape: correct watchdog clocks for LS1088A
  arm64: dts: freescale: sl28: enable fan support
  arm64: dts: freescale: sl28: enable LED support
  arm64: dts: freescale: sl28: map GPIOs to input events
  arm64: dts: freescale: sl28: enable sl28cpld
  arm64: dts: imx8mq-evk: Add MIPI DSI support
  arm64: dts: layerscape: Add label to pcie nodes
  arm64: dts: imx8mn-var-som-symphony: Add Variscite Symphony board with VAR-SOM-MX8MN
  arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module
  arm64: dts: imx8mn-ddr4-evk: Remove unneeded PMIC pin configuration
  arm64: dts: imx8mm-var-som-symphony: Adjust ethernet pin configuration
  arm64: dts: imx8mm-var-som-symphony: Remove unneeded i2c3 properties
  arm64: dts: imx8mm-var-som-symphony: Drop unused gpioledgrp
  arm64: dts: imx8mq-librem5: Add interrupt-names to ti,tps6598x
  ...

Link: https://lore.kernel.org/r/20200923073009.23678-5-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 10:17:45 -07:00
Olof Johansson
5310d705a9 Device tree updates towards 5.10-rc1 for TI K3 platform. 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAl9p/FMACgkQ3bWEnRc2
 JJ2WQxAAg2Amv8rpc1e0PWFQdRf374rZ6KpjtsIm7fXX6PMA39G8tcBmQVgC7xLN
 a+bMceoBJatq8pUxBH91UluMZmG+cH3yzp0rgmP7uZSHPecOgkXhMUxdDwy0+hFj
 xKClp/j9zdma8Zab/gG3h4G6NPw6aBOFxkOkXW7pKCXcRNYSyqiIilafCTfV1Z1C
 A5rETY/FKjXBhT0N9702MooaPXq00cxcKwqO6nTCJzK8X3d/GhDD+QsabVteVN9H
 S+45r8KYxw7JCgt34EUW/LLrexnMOKCLjudcWE7FWMGb0W+KGnuxFUfRpGkbB5jU
 zH+yXiATBQFJOt1+KkxkS7osjf5jbNLsJP9dD8kMYsMEzd0TAQ9lgoVBBMnzUCPf
 68hYOc2kUkQaxOTZ+rhJjz5jbwUjADJ5jr8lJyjMIwey6Ne8BoAgN5Twpj4h58K8
 eFlVIOJ9mpsRLy1GCBgw4VohN+6bCO6K2p69CXgseKfj7JJ+5mtgNA1fVLQ16yB6
 wqdld12bWg83xuI6+pe6JYHVnMpgN2sUn6+uPMIM2YuZBXFTp2fqCSLAqaZeCMna
 37O7Yi3wXgS08IctTRkUNjTfBKzAXebO/x4Rko2/OdUNcYJh3LmFinbU1WY2wEND
 FXWd+GFL2DdmuF/09l0pqFKzvjdUeZMfcI3EeN3KJnNGZoWue7o=
 =7wth
 -----END PGP SIGNATURE-----

Merge tag 'ti-k3-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt

Device tree updates towards 5.10-rc1 for TI K3 platform.

* tag 'ti-k3-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (23 commits)
  arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances
  arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodes
  arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings
  arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name
  arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640
  arm64: dts: ti: k3-*: Use generic pinctrl for node names
  arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names
  arm64: dts: ti: k3-am65*: Use generic gpio for node names
  arm64: dts: ti: k3-am65-main: Use lower case hexadecimal
  arm64: dts: ti: k3-j721e: Use lower case hexadecimal
  arm64: dts: ti: k3-am65: restrict PCIe to Gen2 speed
  arm64: dts: ti: k3-j721e-som-p0: Reserve memory for IPC between RTOS cores
  arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C71x DSP
  arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C71x DSP
  arm64: dts: ti: k3-j721e-main: Add C71x DSP node
  arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C66 DSPs
  arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C66x DSPs
  arm64: dts: ti: k3-j721e-main: Add C66x DSP nodes
  arm64: dts: ti: k3-j721e-som-p0: Move mailbox nodes from board dts file
  arm64: dts: ti: k3-j721e-main: Add crypto accelerator node
  ...

Link: https://lore.kernel.org/r/20200922134722.2y5kqxu4lghbwp5u@akan
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 10:15:12 -07:00
Olof Johansson
6cd19012d0 Qualcomm ARM64 DT fixes for v5.9 
This fixes the OPP table for SDM845 QUP devices to bring back
 Bluetooth support, disables SMMU on SDM630 to make the devices boot
 again, disables the eMMC controller on Kitakami to prevent permanent
 damage and fixes a typo in the pm660.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl9pPacbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3F820P/Ry8VzhQqj9G+jivcGyN
 M62rUcN1vkPQlc6NwtqxeUtIwrORIo8xIV5QH7urNO5PhzZuA/E06tedqmlfGkV9
 znq5NGm22BICkgpN/tFOTM01aOSwyOZ3QEcxOslkCHjSlulwJsSYbG8A/PKtLzG0
 nQSy4mYrNDg4Yl39M1PDapYKLAAJvwxaQvrMyaXOeoZwARy/wexb5p4IyBJqUdel
 xVg8Y7KPNHkXClnWS6rfTumcsgCksnU+ww3BQbPnWs+u95uBuC7oGbxuAPq2to+i
 uOa8TfLuorcpHEaKTrQIsvBoDYQER+o+JrLaoWOygDIW/GPVQiPlzj4f4kavXpOm
 NFEu3BE6TRSaCPP+gK/18qeiJx5WooEuhffzVwxyfhhig5Y95dsLzzSKB8kLiyL5
 4iBFT8fmSNbgrehN5izZ57Qvy7ugID3/B08pwYyEn9fgCHmsVQh0l5QnwvEQHDx9
 wq1HIuLpdIln34v9aB+dAT91xPNIzOK1CAs+bGLvlPsII8eRfKI4L5ABU715GNJP
 Du1B0fY8cwrm2iOmmERkrjhJJgOZx3AR8wFM1Why5LY2KHKQBysNj+EpuO+3CG+N
 fJGgV4B5odBtIKG9Apd9jA8KjTD7Q1AQMKGHS+xyxghOlf3pmWmvxPGYMZoRXwiL
 zm/u4fN8sLmAEk9iGgAPTSUL
 =1HTr
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-fixes-for-5.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

Qualcomm ARM64 DT fixes for v5.9

This fixes the OPP table for SDM845 QUP devices to bring back
Bluetooth support, disables SMMU on SDM630 to make the devices boot
again, disables the eMMC controller on Kitakami to prevent permanent
damage and fixes a typo in the pm660.

* tag 'qcom-arm64-fixes-for-5.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells
  arm64: dts: qcom: kitakami: Temporarily disable SDHCI1
  arm64: dts: sdm630: Temporarily disable SMMUs by default
  arm64: dts: sdm845: Fixup OPP table for all qup devices

Link: https://lore.kernel.org/r/20200922000521.39621-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 10:10:47 -07:00
Olof Johansson
190b05d751 Two fixes for the Allwinner SoCs, one for the H5 GPU support and one for 
a misconfigured regulator on the Bananapi M2 Ultra.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX2jLlQAKCRDj7w1vZxhR
 xfeOAP9HaamZwsHuTm+4FYLhJwUe44c1cHmnRTA49I8ifWaAqwEAt0+SfFue9GG7
 ToKUFegAf7NP2h82QB04a72wHBo8CQk=
 =uA2F
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-fixes-for-5.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes

Two fixes for the Allwinner SoCs, one for the H5 GPU support and one for
a misconfigured regulator on the Bananapi M2 Ultra.

* tag 'sunxi-fixes-for-5.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: h5: remove Mali GPU PMU module
  ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator

Link: https://lore.kernel.org/r/8a436328-b844-4599-8695-ab2088a00ade.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 10:09:39 -07:00
Olof Johansson
abc7220b22 Tag fix up for TI serdes mux definition introduced in 5.9 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAl9onNQACgkQ3bWEnRc2
 JJ3YIw//VzEDb1AlwT40/LMd5i1wWP3mVbRf3oQMGHh0PXW8nM/OA1mD4f0br38e
 /32TeQvF9GsImQF2aUI2vN07cjZFKu3bm8vNmxdPIlQM/tZlL4lfiZAjVrQtc9XH
 +O2z0Y7/3MMf5mJe/kDD0AtTqcIk9nUH0bg8A+teN8QTl+cy/CAmzTbK5oEB6pYy
 08zJlgZBqm4pbeSG4VZyfoTDRwSMg5LyGCG9Z5LgE8fjW9evIqnDJOoErsU+pZZr
 o/SWIQSWFi+Q82OsBuq3OrSwxwAsRI6T7rADcnrwJEFY6G9K+7GCxlYmgX8fq+Y0
 OzIkMce/vmWp4wJ6z2OUbe36Ujvp/rdjhqFFCHuG0rr4czVGF5QKNokqP3BdZGQh
 5IXvDXxMEJZlizNwyUyrruI4D4fLenpbudvOG7IJ+TtSJGNxp04gXda766M1B5+S
 iz4HSnhLq2oNYTyYotcpXeO/p47vuf+ZX258yxtgeMxpsG+nw5FTE1zPcRmNWnMj
 7KVKyXrv/7aPlsoWyREQ4K7olDhiFqF7iLgvrqwuQzvOBwxV+5BeYlXT8JMjApQV
 Jm4evbZYI6Qs1gUWU6NvjHymQT9AHeA0da1AharGEBbGDY5nvepAyn0fTcvO3IwJ
 jpOSQa+OOlJok3nJy9SaNimQScwNogLsxvHHvWc7lsXmIMbOQSE=
 =rVCz
 -----END PGP SIGNATURE-----

Merge tag 'ti-k3-dt-fixes-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/fixes

Tag fix up for TI serdes mux definition introduced in 5.9

* tag 'ti-k3-dt-fixes-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (637 commits)
  arm64: dts: ti: k3-j721e: Rename mux header and update macro names
  Linux 5.9-rc3
  genirq/matrix: Deal with the sillyness of for_each_cpu() on UP
  fsldma: fix very broken 32-bit ppc ioread64 functionality
  kernel.h: Silence sparse warning in lower_32_bits
  cifs: fix check of tcon dfs in smb1
  KVM: arm64: Set HCR_EL2.PTW to prevent AT taking synchronous exception
  KVM: arm64: Survive synchronous exceptions caused by AT instructions
  KVM: arm64: Add kvm_extable for vaxorcism code
  arm64: vdso32: make vdso32 install conditional
  arm64: use a common .arch preamble for inline assembly
  mfd: mfd-core: Ensure disabled devices are ignored without error
  usb: storage: Add unusual_uas entry for Sony PSZ drives
  md/raid5: make sure stripe_size as power of two
  powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU
  io_uring: don't bounce block based -EAGAIN retry off task_work
  io_uring: fix IOPOLL -EAGAIN retries
  arm64/cpuinfo: Remove unnecessary fallthrough annotation
  media: dib0700: Fix identation issue in dib8096_set_param_override()
  hwmon: (gsc-hwmon) Scale temperature to millidegrees
  ...

Link: https://lore.kernel.org/r/20200921125402.mtwypblhb45a6ssh@akan
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 10:08:48 -07:00
Olof Johansson
12f0f6f654 Samsung DTS ARM64 changes for v5.10, part two 
Minor cleanups: removal of undocumented I2S properties, alignment of OPP
 table node name with dtschema.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAl9nefUQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD10wPD/9KA3aaph63wzNeVnktLt8U71Va5OilCtb3
 McsKUv0ibQJ1YXFGMbChpG0rwsExJE2gA+Ur0YdwgoEtQvYi1wwKTTCyWLejzNRT
 uWITxCodPeXDUnNG7TM7BIefb/bO1L1bhjuGLF0S2ThiPMW19+cDXUDZIQBC9aSn
 NmHajddNs+S7x7FnHHRgdTuQ+aTvcFPWzshtLAOEbfOEf4VyyFjRrK0XRfqPpc/i
 n5vmj0uaGuet3b0mODvnzPn2LlajWQN3B4XGR+wCphFBAwl15a0ZI3OKZsshF4UP
 OXm6pd7hbCOHtByKAjq8zBVTYsNUiSyXvtRmujhQWsa8hqqnKd4JkuddRGDMN/Xj
 zUGzo/71m8Tv7IfeTR1W+DQUFQnBM8n5FjbvXLA251TMZu99Fwg9ZVRZEmpqclyR
 xFr4EAglBjpvmW5bYSHdBTJu5kf2g8eizGkf/951UvQythGpkn4dQUGBDfsvY/hm
 Dr30owmE84waThpWVOjXTnZgAw1z062DnVqj5NKg1wXRCQcb1BfqwzF94Qjbe7Ce
 K4+SW3eVFx4oclmBja8a7PlVh+avF1zbx81Rpi04WFACo2DrQNU0YCzlUpNhD9DD
 o2ZI1M2odP7HXtKXg46CELhxZvpCubg4jH35EHj0VFIwTVL3bCGor48cE9rtrjQ6
 7YRDlPWvnQ==
 =RS85
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt64-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM64 changes for v5.10, part two

Minor cleanups: removal of undocumented I2S properties, alignment of OPP
table node name with dtschema.

* tag 'samsung-dt64-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Align OPP table name with dt-schema
  arm64: dts: exynos: Remove undocumented i2s properties in Exynos5433

Link: https://lore.kernel.org/r/20200920160705.9651-4-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 10:02:59 -07:00
Olof Johansson
dd59aed76d arm64: tegra: Changes for v5.10-rc1 
This set of changes fixes some minor issues in existing device trees and
 adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled
 to allow them to be detected by software.
 
 It also adds support for the Tegra234 VDK board, which is a pre-silicon
 platform for the upcoming Orin SoC.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl9ky48THHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoVVtEACJcW6ztbQiqrksFdVW+8wlT/EZwNwr
 qwwjGvy0ovJIYAPTB+XhGllUp17QR2EVzdGJW9Q8mr92QRpoQxSg3yB3BaJWsMoz
 AH+9qkQoRE5F+aFwO2l8kTBDswyiOQCLxsiDSCcCWTHtvAQOl/K2HjG+4kxtko+C
 0in+p67PG0t4qanjeTApWEWXjfiXBpM0bcv89TKK0SO+k+zsjupEZeOnVIbEpGTa
 SMjKm/0l0jZIEMoweqX3H0jpTBvqE6IjLm4EAbCfLJrhDEIQe50WkNpw2CVaCZy6
 2Mjnv7Gr/XO3MKmM4stLYTZ9eu5qDa7wGrQT/mXZt7kEc3L85rGZGyWQm5bCmspa
 mSKZ+swtegkEBBofOabxcCDi0V9KxDiba3hwv4mr17qMjj7VBK5le3JhUS19qnZ8
 Osu81JqKrDjfkmxtqSnJEeTTVwxBG09WQ5lME9FRBqH9P5Y1L7yCAuqPLzYhXxtj
 KAcqveVzoMMi2YIp4Rt07seWsHhuNqkY9XWtPWrgubGtU1AKYXWHYDojefyo1VUq
 1bOkzSa+ZVBwZuRmdgn2vxbeJnexeTAPolJp4WCpJpSGJbiFKNqhh5scjjfSviGS
 PfOITtuJgaxoqEZRhCdF/VM2+YSjjVljRkiE6b8W0+eKkeQKzzDvJIDnOqeb7PGX
 1gJniuIR25eShg==
 =zeT7
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Changes for v5.10-rc1

This set of changes fixes some minor issues in existing device trees and
adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled
to allow them to be detected by software.

It also adds support for the Tegra234 VDK board, which is a pre-silicon
platform for the upcoming Orin SoC.

* tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Initial Tegra234 VDK support
  arm64: tegra: Populate EEPROMs for Jetson Xavier NX
  arm64: tegra: Add label properties for EEPROMs
  arm64: tegra: Add DT binding for AHUB components
  arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano
  arm64: tegra: Properly size register regions for GPU on Tegra194
  arm64: tegra: Use valid PWM period for VDD_GPU on Tegra210
  arm64: tegra: Describe display controller outputs for Tegra210
  arm64: tegra: Disable SD card write-protection on Jetson Nano
  arm64: tegra: Add VBUS supply for micro USB port on Jetson Nano
  arm64: tegra: Wire up pinctrl states for all DPAUX controllers
  arm64: tegra: Add ID EEPROMs on Jetson AGX Xavier

Link: https://lore.kernel.org/r/20200918150303.3938852-5-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 10:01:52 -07:00
Olof Johansson
0b69d912b3 Renesas ARM DT updates for v5.10 (take two) 
- PCIe endpoint support for the RZ/G2H SoC,
   - SATA support for the HopeRun HiHope RZ/G2H board,
   - Increase support (CAN, LED, SPI NOR, VIN, VSP) for the RZ/G1H SoC on
     the iWave Qseven board (G21D), and its camera add-on board,
   - Initial support for the R-Car V3U SoC on the Falcon CPU and BreakOut
     boards,
   - HDMI display and sound support for the R-Car M3-W+ SoC on the
     Salvator-XS board,
   - Digital Radio Interface (DRIF) support for the R-Car E3 SoC,
   - Minor fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX2SkmQAKCRCKwlD9ZEnx
 cIXNAP0XqvKJP7xGjQ1ORyePB1nWZtebVqGoQFxpvqwznMNZlAD7BIRlATo4LYpu
 LNMya5sk85WAhZNbpkHwR++3/8m+mgE=
 =Va2A
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm-dt-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.10 (take two)

  - PCIe endpoint support for the RZ/G2H SoC,
  - SATA support for the HopeRun HiHope RZ/G2H board,
  - Increase support (CAN, LED, SPI NOR, VIN, VSP) for the RZ/G1H SoC on
    the iWave Qseven board (G21D), and its camera add-on board,
  - Initial support for the R-Car V3U SoC on the Falcon CPU and BreakOut
    boards,
  - HDMI display and sound support for the R-Car M3-W+ SoC on the
    Salvator-XS board,
  - Digital Radio Interface (DRIF) support for the R-Car E3 SoC,
  - Minor fixes and cleanups.

* tag 'renesas-arm-dt-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (24 commits)
  arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels
  arm64: dts: renesas: r8a77990: Fix MSIOF1 DMA channels
  arm64: dts: renesas: r8a77990: Add DRIF support
  ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add can0 support to camera DB
  ARM: dts: r8a7742: Add VSP support
  arm64: dts: renesas: Drop superfluous pin configuration containers
  arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Sound support
  arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Display support
  arm64: dts: renesas: r8a77961: Add HDMI device nodes
  arm64: dts: renesas: r8a77961: Add DU device nodes
  arm64: dts: renesas: r8a77961: Add VSP device nodes
  arm64: dts: renesas: r8a77961: Add FCP device nodes
  arm64: dts: renesas: Fix pin controller node names
  ARM: dts: renesas: Fix pin controller node names
  arm64: dts: renesas: Add Renesas Falcon boards support
  arm64: dts: renesas: Add Renesas R8A779A0 SoC support
  ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication
  ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board
  ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support
  ARM: dts: r8a7742: Add VIN DT nodes
  ...

Link: https://lore.kernel.org/r/20200918124800.15555-2-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 09:59:32 -07:00
Krzysztof Kozlowski
e90ac411dc arm64: dts: apm: add required gpio-cells to DW APB GPIO controller port 
The Synopsys DesignWare APB GPIO controller port must have gpio-cells
property, as pointed by dtschema:

  arch/arm64/boot/dts/apm/apm-mustang.dt.yaml: gpio@1c024000: gpio-controller@0: '#gpio-cells' is a required property

Link: https://lore.kernel.org/r/20200917165040.22908-2-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 09:50:18 -07:00
Krzysztof Kozlowski
61163895f3 arm64: dts: apm: drop unused reg-io-width from DW APB GPIO controller 
The Synopsys DesignWare APB GPIO controller driver does not parse
reg-io-width and dtschema does not allow it so drop it to fix dtschema
warnings like:

  arch/arm64/boot/dts/apm/apm-mustang.dt.yaml: gpio@1c024000:
    'reg-io-width' does not match any of the regexes: '^gpio-(port|controller)@[0-9a-f]+$', 'pinctrl-[0-9]+'

Link: https://lore.kernel.org/r/20200917165040.22908-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 09:50:07 -07:00
Olof Johansson
b042dc7424 SoCFPGA DTS updates for v5.10 
- Increase shared-dma-pool size to 32MB
 - Add ptp_ref clock properties to the ethernet nodes on Stratix10 and Agilex
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAl9ieBkUHGRpbmd1eWVu
 QGtlcm5lbC5vcmcACgkQGZQEC4GjKPQxIA//VUV1yy5PWxHQSEVF47XinZFN9H/2
 pdxPF5O9z8S0CuHWQlYYi53wwLjw2cM44B78PbLx4dtQnmno1gaQQsUTuMfDjUeN
 E9DwTJJTonOYib7dIwLRh33mRSd8WA8Hp2up3Ban2X14Biec9VphTDo5ECXUxPk2
 +ajsDkFxBTREfTh8fwnJvZnj5ApimHfTvODEpDSdPqVY1vXCUIbMCHbWrTnCabck
 qvLzamZU6k7/dccEiv9eXnpN/WVj4jGgdHe3x8XApIEhqmdHqgP7okH1n8sZDkr/
 S0ew63ST+rD24+SC+OodWEpRGNkmfzzfi0I7aIVw2h3Nh+fwpx6HDQifnL5HtJKM
 lWqnVR9szxdwRRafqXMmG41qXmu6ZomD5TNGkPIfZJ2Ib67xoXpZB5WtQkDbu34r
 kBWQsLiEkN1mPjUs0htqskaPRc228zHMvTNd9OC9917/V7DgMg5dMEMbO5KUHCDv
 alX/rcYOXkUDEyCjKJ9zEAvYeO8Fq0pF9Onz8euYNQQCk9efBf/r3z9pwd7kJ8b9
 Tkg2SabimR+3qN6luiPwdaWGWk2MF6+JMQqKywanG+5DWT540Ka++IF/CR2KJh4J
 9F81oAF/Z94ATQ8F95bKogrSfeGj/jhwL5T0qIejOvaWW70Jb/C1DUBuEyl6g6ek
 oYXdZbiSmXvI1R8=
 =N0jI
 -----END PGP SIGNATURE-----

Merge tag 'socfpga_dts_update_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.10
- Increase shared-dma-pool size to 32MB
- Add ptp_ref clock properties to the ethernet nodes on Stratix10 and Agilex

* tag 'socfpga_dts_update_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: dts: stratix10/agilex: add the ptp_ref clock
  arm64: dts: agilex: increase shared memory size to 32Mb

Link: https://lore.kernel.org/r/20200916204422.30897-1-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 09:48:13 -07:00
Olof Johansson
38c419037a Sparx5 DT updates for Linux 5.10 
- Add public repo to MAINTAINERS
 - Add SPI controller and devices
 - Add eMMC controller and devices
 - Add temperature sensor
 -----BEGIN PGP SIGNATURE-----
 
 iJEEABYIADkWIQQaBzOicklHovJvajA3MaYaSgcc9AUCX2HdrxscbGFycy5wb3Zs
 c2VuQG1pY3JvY2hpcC5jb20ACgkQNzGmGkoHHPSyFgD8CeApRk+Nft2RMt72TyLW
 A/sGGCdqnhQqp7Sswpf625wA/idFqzcEfwQNVar29MBJ3A6Uu213DK4b/lnkw9cm
 Mg4E
 =Ln9n
 -----END PGP SIGNATURE-----

Merge tag 'sparx5-dt-5.10' of https://github.com/microchip-ung/linux-upstream into arm/dt

Sparx5 DT updates for Linux 5.10

- Add public repo to MAINTAINERS
- Add SPI controller and devices
- Add eMMC controller and devices
- Add temperature sensor

* tag 'sparx5-dt-5.10' of https://github.com/microchip-ung/linux-upstream:
  arm64: dts: sparx5: Add spi-nand devices
  arm64: dts: sparx5: Add spi-nor support
  arm64: dts: sparx5: Add SPI controller and associated mmio-mux
  MAINTAINERS: Add git tree for Sparx5
  arm64: dts: sparx5: Add hwmon temperature sensor
  arm64: dts: sparx5: Add Sparx5 eMMC support

Link: https://lore.kernel.org/r/878sda2dj0.fsf@microchip.com
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 09:47:12 -07:00
Olof Johansson
39d601ba9a ARM64: DT: Hisilicon ARM64 SoCs DT updates for 5.10 
- Change the status properties from "ok" to "okay" for
   all the hisilicon SoCs
 - Update the SP805 nodes to have the correct clocks and
   clock names for the hi3660 and hi6220 SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJfYWmLAAoJEAvIV27ZiWZcOhgP+gNhGuy1F1+P1LnvKDo5Hi/g
 a2mf6NfySPhm9Cg/2qSQkI5F1LnQayTBWEv850oL21CzqKZ8cpifs4HuQRZDwV4V
 L2MIB9/cQRKfj9cONOuRYjNNc7CZl+FmVWCIn/WV34x4xYs7QmH04n4VwBXP2VRx
 6UgZ96tMsT0LB+ni9qLdxBn8F8loF7YgJCcncOeViGic+TEa8qw9kDvXcqibuXIF
 R5LbhLfE1zZCBi1gveLHXIN6kAF+Zk27sZU+MwouhuYC2kp1EQ06bb0XJ8abiT93
 iLiUQXvPfj9tcsZ4P6XRGODgOkrl/JU/mtxCyNziBXOU5fgnBi8TniQQVn/+0Oy5
 XMtgWMFphRY5q/rnHCLgDVvp8At6mIOFjXx8+CBxoxhXEglpo2P5JQ3IXDOt/ZXA
 vm/68IbE9PDm/O0bzN2gOIbVBZAttydU+oL6Otpo4l1W1xETDUskH6kGt5SYeiO2
 HsTTfcKvORXmRmtfBoWMO3WfO3uRlSCtj5DygxBPn7cCNcdaaBWc9N1yVkMhhT2x
 FoDU2uA4q7T8DJRaHSArhdZJk0LHdgGmaT8C8ksMkQ+4aAPQi/lzqq9KG4LuyO7p
 j+F+7sKAsvOGiMcucpGilMX2QCCuicZRYs+d7QPslaiOywihHFwb3f/1c5BMpTam
 4D38UFWUX3RxNV8nyBWe
 =/Wrz
 -----END PGP SIGNATURE-----

Merge tag 'hisi-arm64-dt-for-5.10' of git://github.com/hisilicon/linux-hisi into arm/dt

ARM64: DT: Hisilicon ARM64 SoCs DT updates for 5.10

- Change the status properties from "ok" to "okay" for
  all the hisilicon SoCs
- Update the SP805 nodes to have the correct clocks and
  clock names for the hi3660 and hi6220 SoCs

* tag 'hisi-arm64-dt-for-5.10' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hisilicon: Fix SP805 clocks
  arm64: dts: hisilicon: replace status value "ok" by "okay"

Link: https://lore.kernel.org/r/5F617134.3050705@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
 2020-09-26 09:46:10 -07:00
Krzysztof Kozlowski
197bbae9ed arm64: dts: ti: k3-j721e-common-proc-board: align GPIO hog names with dtschema 
The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20200916155715.21009-7-krzk@kernel.org
 2020-09-25 06:59:31 -05:00
Faiz Abbas
a2178b83ae arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and SD card 
Add support for the eMMC and SD card connected on the common
processor board

sdhci0 is connected to an eMMC while sdhci1 is connected to the
micro SD slot.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Link: https://lore.kernel.org/r/20200924112644.11076-3-faiz_abbas@ti.com
 2020-09-24 07:11:38 -05:00
Faiz Abbas
7cd03dc78b arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodes 
Add support for MMC/SD controller nodes present on TI's j7200 SoCs.

There are two nodes:
        1. sdhci0 (8 bit bus width, 200 MHz, HS200, 200 MBps)
        2. sdhci1 (4 bit bus width, 50 MHz, HS, 25 MBps)

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Link: https://lore.kernel.org/r/20200924112644.11076-2-faiz_abbas@ti.com
 2020-09-24 07:11:38 -05:00
Vignesh Raghavendra
0bf331496a arm64: dts: ti: k3-j7200-som-p0: Add HyperFlash node 
J7200 SoM has a HyperFlash connected to HyperBus memory controller. But
HyperBus is muxed with OSPI, therefore keep HyperBus node disabled.
Bootloader will detect the mux and enable the node as required.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Link: https://lore.kernel.org/r/20200923163150.16973-3-vigneshr@ti.com
 2020-09-24 06:11:53 -05:00
Vignesh Raghavendra
1b77265626 arm64: dts: ti: k3-j7200-mcu-wakeup: Add HyperBus node 
J7200 has a Flash SubSystem that has one OSPI and one HyperBus.. Add
DT nodes for HyperBus controller for now.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Link: https://lore.kernel.org/r/20200923163150.16973-2-vigneshr@ti.com
 2020-09-24 06:11:53 -05:00
Vignesh Raghavendra
e25889f8f5 arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders 
Add DT nodes for I2C GPIO expanders on main_i2c0 and main_i2c1 and
also add the pinmux corresponding to these I2C instances.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Faiz Abbas <faiz_abbas@ti.com>
Link: https://lore.kernel.org/r/20200923155400.13757-3-vigneshr@ti.com
 2020-09-24 06:11:53 -05:00
Vignesh Raghavendra
03bfeb5287 arm64: dts: ti: k3-j7200: Add I2C nodes 
J7200 has 7 I2Cs in main domain, 2 I2Cs in MCU and 1 in wakeup domain.
Add DT nodes for the same.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Faiz Abbas <faiz_abbas@ti.com>
Link: https://lore.kernel.org/r/20200923155400.13757-2-vigneshr@ti.com
 2020-09-24 06:11:47 -05:00