memory allocated by kmem_cache_alloc() should be freed using
kmem_cache_free(), not kfree().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This will later allow NFS locking code to wait for readahead to complete
before releasing byte range locks.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When we send a RENEW or SEQUENCE operation in order to probe if the
lease is still valid, we want it to be able to time out since the
lease we are probing is likely to time out too. Currently, because
we use soft mount semantics for these RPC calls, the return value
is EIO, which causes the state manager to exit with an "unhandled
error" message.
This patch changes the call semantics, so that the RPC layer returns
ETIMEDOUT instead of EIO. We then have the state manager default to
a simple retry instead of exiting.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Closed stateid's are kept around a little while to handle close replays
in the 4.0 case. So we stash them in the last-used stateid in the
oo_last_closed_stateid field of the open owner. We can free that in
encode_seqid_op_tail once the seqid on the open owner is next
incremented. But we don't want to do that on the close itself; so we
set NFS4_OO_PURGE_CLOSE flag set on the open owner, skip freeing it the
first time through encode_seqid_op_tail, then when we see that flag set
next time we free it.
This is unnecessarily baroque.
Instead, just move the logic that increments the seqid out of the xdr
code and into the operation code itself.
The justification given for the current placement is that we need to
wait till the last minute to be sure we know whether the status is a
sequence-id-mutating error or not, but examination of the code shows
that can't actually happen.
Reported-by: Yanchuan Nian <ycnian@gmail.com>
Tested-by: Yanchuan Nian <ycnian@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the state manager thread is already running, we may end up
racing with it in nfs_client_return_marked_delegations. Better to
just allow the state manager thread to do the job.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, if the application that holds the file open isn't doing
I/O, we may end up returning the delegation. This means that we can
no longer cache the file as aggressively, and often also that we
multiply the state that both the server and the client needs to track.
This patch adds a check for open files to the routine that scans
for delegations that are unreferenced.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
All error cases are handled by the switch() statement, meaning that the
call to nfs4_handle_exception() is unreachable.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A server shouldn't normally return NFS4ERR_GRACE if the client holds a
delegation, since no conflicting lock reclaims can be granted, however
the spec does not require the server to grant the open in this
instance
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
A server shouldn't normally return NFS4ERR_GRACE if the client holds a
delegation, since no conflicting lock reclaims can be granted, however
the spec does not require the server to grant the lock in this
instance.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
The Kconfig entry for SUNRPC_SWAP selects NETVM. That select statement
was added in commit a564b8f039 ("nfs:
enable swap on NFS"). But there's no Kconfig symbol NETVM. It apparently
was only in used in development versions of the swap over nfs
functionality but never entered mainline. Anyhow, it is a nop and can
safely be dropped.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The v4.1 callback thread has set_freezable() at the top, but it doesn't
ever try to freeze within the loop. Have it call try_to_freeze() at the
top of the loop. If a freeze event occurs, recheck kthread_should_stop()
after thawing.
Reported-by: Yanchuan Nian <ycnian@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the call to rpciod_up() fails, we currently leak a reference to the
struct rpc_xprt.
As part of the fix, we also remove the redundant check for xprt!=NULL.
This is already taken care of by the callers.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It is unsafe to use list_for_each_entry_safe() here, because
when we drop the nn->nfs_client_lock, we pin the _current_ list
entry and ensure that it stays in the list, but we don't do the
same for the _next_ list entry. Use of list_for_each_entry() is
therefore the correct thing to do.
Also fix the refcounting in nfs41_walk_client_list().
Finally, ensure that the nfs_client has finished being initialised
and, in the case of NFSv4.1, that the session is set up.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
Cc: stable@vger.kernel.org [>= 3.7]
When we assign a new rpc_client to clp->cl_rpcclient, we need to destroy
the old one.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org [>=3.7]
While testing error cases where rpc_new_client() fails, I saw
some oopses.
If rpc_new_client() fails, it already invokes xprt_put(). Thus
__rpc_clone_client() does not need to invoke it again.
Introduced by commit 1b63a751 "SUNRPC: Refactor rpc_clone_client()"
Fri Sep 14, 2012.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org [>=3.7]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The expected behaviour is that the client will decide at mount time
whether or not to use a krb5i machine cred, or AUTH_NULL.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
- Ensure that we exit with ENOENT if the call to ops->get_clid_cred()
fails.
- Handle the case where ops->detect_trunking() exits with an
unexpected error, and return EIO.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the rpcsec_gss_krb5 module cannot be loaded, the attempt to create
an rpc_client in nfs4_init_client will currently fail with an EINVAL.
Fix is to retry with AUTH_NULL.
Regression introduced by the commit "NFS: Use "krb5i" to establish NFSv4
state whenever possible"
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
Since commit ec88f28d in 2009, checking if the user-specified flavor
is in the server's flavor list has been the source of a few
noticeable regressions (now fixed), but there is one that is still
vexing.
An NFS server can list AUTH_NULL in its flavor list, which suggests
a client should try to mount the server with the flavor of the
client's choice, but the server will squash all accesses. In some
cases, our client fails to mount a server because of this check,
when the mount could have proceeded successfully.
Skip this check if the user has specified "sec=" on the mount
command line. But do consult the server-provided flavor list to
choose a security flavor if no sec= option is specified on the mount
command.
If a server lists Kerberos pseudoflavors before "sys" in its export
options, our client now chooses Kerberos over AUTH_UNIX for mount
points, when no security flavor is specified by the mount command.
This could be surprising to some administrators or users, who would
then need to have Kerberos credentials to access the export.
Or, a client administrator may not have enabled rpc.gssd. In this
case, auth_rpcgss.ko might still be loadable, which is enough for
the new logic to choose Kerberos over AUTH_UNIX. But the mount
would fail since no GSS context can be created without rpc.gssd
running.
To retain the use of AUTH_UNIX by default:
o The server administrator can ensure that "sys" is listed before
Kerberos flavors in its export security options (see
exports(5)),
o The client administrator can explicitly specify "sec=sys" on
its mount command line (see nfs(5)),
o The client administrator can use "Sec=sys" in an appropriate
section of /etc/nfsmount.conf (see nfsmount.conf(5)), or
o The client administrator can blacklist auth_rpcgss.ko.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
RPC_AUTH_MAXFLAVOR is an invalid flavor, on purpose. Don't allow
any processing whatsoever if a caller passes it to rpcauth_create()
or rpcauth_get_gssinfo().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Once we've unhashed the delegation, it's only hanging around for the
benefit of an oustanding recall, which only needs the encoded
filehandle, stateid, and dl_retries counter. No point keeping the file
around any longer, or keeping it hashed.
This also fixes a race: calls to idr_remove should really be serialized
by the caller, but the nfs4_put_delegation call from the callback code
isn't taking the state lock.
(Better might be to cancel the callback before destroying the
delegation, and remove any need for reference counting--but I don't see
an easy way to cancel an rpc call.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If kmalloc() fails in cache_open(), module cd->owner left locked.
The patch adds module_put(cd->owner) on this path.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
when create /proc/fs/nfs/exports error, we should remove /proc/fs/nfs,
if don't do it, it maybe cause Memory leak.
Signed-off-by: fanchaoting <fanchaoting@cn.fujitsu.com>
Reviewed-by: chendt.fnst <chendt.fnst@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
we should return error status directly when nfs4_preprocess_stateid_op
return error.
Signed-off-by: fanchaoting <fanchaoting@cn.fujitsu.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We only ever traverse the hash chains in the forward direction, so a
double pointer list head isn't really necessary.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This changes session destruction to be similar to client destruction in
that attempts to destroy a session while in use (which should be rare
corner cases) result in DELAY. This simplifies things somewhat and
helps meet a coming 4.2 requirement.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When a setclientid_confirm or create_session confirms a client after a
client reboot, it also destroys any previous state held by that client.
The shutdown of that previous state must be careful not to free the
client out from under threads processing other requests that refer to
the client.
This is a particular problem in the NFSv4.1 case when we hold a
reference to a session (hence a client) throughout compound processing.
The server attempts to handle this by unhashing the client at the time
it's destroyed, then delaying the final free to the end. But this still
leaves some races in the current code.
I believe it's simpler just to fail the attempt to destroy the client by
returning NFS4ERR_DELAY. This is a case that should never happen
anyway.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The locking here is very fiddly, and there's no reason for us to be
setting cstate->session, since this is the only op in the compound.
Let's just take the state lock and drop the reference counting.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
destroy_session uses the session and client without continuously holding
any reference or locks.
Put the whole thing under the state lock for now.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I'm not sure what the check for clientid expiry was meant to do here.
The check for a matching session is redundant given the previous check
for state: a client without state is, in particular, a client without
sessions.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
E.g. printk's that just report the return value from an op are
uninteresting as we already do that in the main proc_compound loop.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This should never happen.
(Note: the comparable case in setclientid_confirm *can* happen, since
updating a client record can result in both confirmed and unconfirmed
records with the same clientid.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFS4_OO_PURGE_CLOSE is not handled properly. To avoid memory leak, nfs4
stateid which is pointed by oo_last_closed_stid is freed in nfsd4_close(),
but NFS4_OO_PURGE_CLOSE isn't cleared meanwhile. So the stateid released in
THIS close procedure may be freed immediately in the coming encoding function.
Sorry that Signed-off-by was forgotten in last version.
Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
lk_rflags is never used anywhere, and rflags is not defined in struct
nfsd4_lock.
Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we drop the lock here there's nothing keeping the client around:
the only lock still held is the xpt_lock on this socket, but this socket
no longer has any connection with the client so there's no way for other
code to know we're still using the client.
The solution is simple: all nfsd4_probe_callback does is set a few
variables and queue some work, so there's no reason we can't just keep
it under the lock.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If a client sets an owner (or group_owner or acl) attribute on open for
create, and the mapping of that owner to an id fails, then we return
BAD_OWNER. But BAD_OWNER is a seqid-mutating error, so we can't
shortcut the open processing that case: we have to at least look up the
owner so we can find the seqid to bump.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
