In case the DTB provided by the bootloader/BootROM is before the kernel
image or outside /memory, we won't be able to access it through the
linear mapping, and get a segfault on setup_arch(). Currently OpenSBI
relocates DTB but that's not always the case (e.g. if FW_JUMP_FDT_ADDR
is not specified), and it's also not the most portable approach since
the default FW_JUMP_FDT_ADDR of the generic platform relocates the DTB
at a specific offset that may not be available. To avoid this situation
copy DTB so that it's visible through the linear mapping.
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Link: https://lore.kernel.org/r/20220322132839.3653682-1-mick@ics.forth.gr
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: f105aa940e ("riscv: add BUILTIN_DTB support for MMU-enabled targets")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When Sv57 is not available the satp.MODE test in set_satp_mode() will
fail and lead to pgdir re-programming for Sv48. The pgdir re-programming
will fail as well due to pre-existing pgdir entry used for Sv57 and as
a result kernel fails to boot on RISC-V platform not having Sv57.
To fix above issue, we should clear the pgdir memory in set_satp_mode()
before re-programming.
Fixes: 011f09d120 ("riscv: mm: Set sv57 on defaultly")
Reported-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Support for Sv57-based virtual memory.
* Various improvements for the MicroChip PolarFire SOC and the
associated Icicle dev board, which should allow upstream kernels to
boot without any additional modifications.
* An improved memmove() implementation.
* Support for the new Ssconfpmf and SBI PMU extensions, which allows for
a much more useful perf implementation on RISC-V systems.
* Support for restartable sequences.
-----BEGIN PGP SIGNATURE-----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=Omc6
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for Sv57-based virtual memory.
- Various improvements for the MicroChip PolarFire SOC and the
associated Icicle dev board, which should allow upstream kernels to
boot without any additional modifications.
- An improved memmove() implementation.
- Support for the new Ssconfpmf and SBI PMU extensions, which allows
for a much more useful perf implementation on RISC-V systems.
- Support for restartable sequences.
* tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (36 commits)
rseq/selftests: Add support for RISC-V
RISC-V: Add support for restartable sequence
MAINTAINERS: Add entry for RISC-V PMU drivers
Documentation: riscv: Remove the old documentation
RISC-V: Add sscofpmf extension support
RISC-V: Add perf platform driver based on SBI PMU extension
RISC-V: Add RISC-V SBI PMU extension definitions
RISC-V: Add a simple platform driver for RISC-V legacy perf
RISC-V: Add a perf core library for pmu drivers
RISC-V: Add CSR encodings for all HPMCOUNTERS
RISC-V: Remove the current perf implementation
RISC-V: Improve /proc/cpuinfo output for ISA extensions
RISC-V: Do no continue isa string parsing without correct XLEN
RISC-V: Implement multi-letter ISA extension probing framework
RISC-V: Extract multi-letter extension names from "riscv, isa"
RISC-V: Minimal parser for "riscv, isa" strings
RISC-V: Correctly print supported extensions
riscv: Fixed misaligned memory access. Fixed pointer comparison.
MAINTAINERS: update riscv/microchip entry
riscv: dts: microchip: add new peripherals to icicle kit device tree
...
Replace the conditional compilation using "#ifdef CONFIG_KEXEC_CORE" by a
check for "IS_ENABLED(CONFIG_KEXEC_CORE)", to simplify the code and
increase compile coverage.
Link: https://lkml.kernel.org/r/20211206160514.2000-3-jszhang@kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
high_memory used to be initialized in mem_init, way after setup_bootmem.
But a call to dma_contiguous_reserve in this function gives rise to the
below warning because high_memory is equal to 0 and is used at the very
beginning at cma_declare_contiguous_nid.
It went unnoticed since the move of the kasan region redefined
KERN_VIRT_SIZE so that it does not encompass -1 anymore.
Fix this by initializing high_memory in setup_bootmem.
------------[ cut here ]------------
virt_to_phys used for non-linear address: ffffffffffffffff (0xffffffffffffffff)
WARNING: CPU: 0 PID: 0 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xac/0x1b8
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.17.0-rc1-00007-ga68b89289e26 #27
Hardware name: riscv-virtio,qemu (DT)
epc : __virt_to_phys+0xac/0x1b8
ra : __virt_to_phys+0xac/0x1b8
epc : ffffffff80014922 ra : ffffffff80014922 sp : ffffffff84a03c30
gp : ffffffff85866c80 tp : ffffffff84a3f180 t0 : ffffffff86bce657
t1 : fffffffef09406e8 t2 : 0000000000000000 s0 : ffffffff84a03c70
s1 : ffffffffffffffff a0 : 000000000000004f a1 : 00000000000f0000
a2 : 0000000000000002 a3 : ffffffff8011f408 a4 : 0000000000000000
a5 : 0000000000000000 a6 : 0000000000f00000 a7 : ffffffff84a03747
s2 : ffffffd800000000 s3 : ffffffff86ef4000 s4 : ffffffff8467f828
s5 : fffffff800000000 s6 : 8000000000006800 s7 : 0000000000000000
s8 : 0000000480000000 s9 : 0000000080038ea0 s10: 0000000000000000
s11: ffffffffffffffff t3 : ffffffff84a035c0 t4 : fffffffef09406e8
t5 : fffffffef09406e9 t6 : ffffffff84a03758
status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003
[<ffffffff8322ef4c>] cma_declare_contiguous_nid+0xf2/0x64a
[<ffffffff83212a58>] dma_contiguous_reserve_area+0x46/0xb4
[<ffffffff83212c3a>] dma_contiguous_reserve+0x174/0x18e
[<ffffffff83208fc2>] paging_init+0x12c/0x35e
[<ffffffff83206bd2>] setup_arch+0x120/0x74e
[<ffffffff83201416>] start_kernel+0xce/0x68c
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<0000000000000000>] 0x0
softirqs last enabled at (0): [<0000000000000000>] 0x0
softirqs last disabled at (0): [<0000000000000000>] 0x0
---[ end trace 0000000000000000 ]---
Fixes: f7ae02333d ("riscv: Move KASAN mapping next to the kernel mapping")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This implements Sv57 support at runtime. The kernel will try to boot
with 5-level page table firstly , and will fallback to 4-level if the HW
does not support it. And it will finally fallback to 3-level if the HW
alse does not support sv48.
* riscv-sv57:
riscv: mm: Support kasan for sv57
riscv: mm: Set sv57 on defaultly
riscv: mm: Prepare pt_ops helper functions for sv57
riscv: mm: Control p4d's folding by pgtable_l5_enabled
This patch sets sv57 on defaultly if CONFIG_64BIT. And do fallback to try
to set sv48 on boot time if sv57 is not supported in current hardware.
Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch prepare some pt_ops helper functions which will be used in
creating sv57 mappings during boot time.
Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
To determine pgtable level at boot time, we can not use helper functions
in include/asm-generic/pgtable-nop4d.h and must implement these
functions. This patch uses pgtable_l5_enabled variable instead of
including pgtable-nop4d.h to controle p4d's folding, and implements
corresponding helper functions.
Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
satp_mode is never modified after init, so it can be marked as
__ro_after_init.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This manifests as a crash early in boot on VexRiscv.
Signed-off-by: Myrtle Shah <gatecat@ds0.me>
[Palmer: split commit]
Fixes: 44c9225729 ("RISC-V: enable XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This manifests as a crash early in boot on VexRiscv.
Signed-off-by: Myrtle Shah <gatecat@ds0.me>
[Palmer: split commit]
Fixes: 6d7f91d914 ("riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
arch/riscv/mm/init.c:48:11-16: WARNING: conversion to bool not needed here
Remove unneeded conversion to bool
Semantic patch information:
Relational and logical operators evaluate to bool,
explicit conversion is overly verbose and unneeded.
Generated by: scripts/coccinelle/misc/boolconv.cocci
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patchset allows to have a single kernel for sv39 and sv48 without
being relocatable.
The idea comes from Arnd Bergmann who suggested to do the same as x86,
that is mapping the kernel to the end of the address space, which allows
the kernel to be linked at the same address for both sv39 and sv48 and
then does not require to be relocated at runtime.
This implements sv48 support at runtime. The kernel will try to boot
with 4-level page table and will fallback to 3-level if the HW does not
support it. Folding the 4th level into a 3-level page table has almost
no cost at runtime.
Note that kasan region had to be moved to the end of the address space
since its location must be known at compile-time and then be valid for
both sv39 and sv48 (and sv57 that is coming).
* riscv-sv48-v3:
riscv: Explicit comment about user virtual address space size
riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo
riscv: Implement sv48 support
asm-generic: Prepare for riscv use of pud_alloc_one and pud_free
riscv: Allow to dynamically define VA_BITS
riscv: Introduce functions to switch pt_ops
riscv: Split early kasan mapping to prepare sv48 introduction
riscv: Move KASAN mapping next to the kernel mapping
riscv: Get rid of MAXPHYSMEM configs
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
By adding a new 4th level of page table, give the possibility to 64bit
kernel to address 2^48 bytes of virtual address: in practice, that offers
128TB of virtual address space to userspace and allows up to 64TB of
physical memory.
If the underlying hardware does not support sv48, we will automatically
fallback to a standard 3-level page table by folding the new PUD level into
PGDIR level. In order to detect HW capabilities at runtime, we
use SATP feature that ignores writes with an unsupported mode.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This simply gathers the different pt_ops initialization in functions
where a comment was added to explain why the page table operations must
be changed along the boot process.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now that kasan shadow region is next to the kernel, for sv48, this
region won't be aligned on PGDIR_SIZE and then when populating this
region, we'll need to get down to lower levels of the page table. So
instead of reimplementing the page table walk for the early population,
take advantage of the existing functions used for the final population.
Note that kasan swapper initialization must also be split since memblock
is not initialized at this point and as the last PGD is shared with the
kernel, we'd need to allocate a PUD so postpone the kasan final
population after the kernel population is done.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now that KASAN_SHADOW_OFFSET is defined at compile time as a config,
this value must remain constant whatever the size of the virtual address
space, which is only possible by pushing this region at the end of the
address space next to the kernel mapping.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, the #ifdef CONFIG_XIP_KERNEL usage can be divided into the
following three types:
The first one is for functions/declarations only used in XIP case.
The second one is for XIP_FIXUP case. Something as below:
|foo_type foo;
|#ifdef CONFIG_XIP_KERNEL
|#define foo (*(foo_type *)XIP_FIXUP(&foo))
|#endif
Usually, it's better to let the foo macro sit with the foo var
together. But if various foos are defined adjacently, we can
save some #ifdef CONFIG_XIP_KERNEL usage by grouping them together.
The third one is for different implementations for XIP, usually, this
is a #ifdef...#else...#endif case.
This patch moves the pt_ops macro to adjacent #ifdef CONFIG_XIP_KERNEL
and group first type usage cases into one.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Try our best to replace the conditional compilation using
"#ifdef CONFIG_XIP_KERNEL" with "IS_ENABLED(CONFIG_XIP_KERNEL)", to
simplify the code and to increase compile coverage.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Except "pt_ops", other global vars when CONFIG_XIP_KERNEL=y is defined
as below:
|foo_type foo;
|#ifdef CONFIG_XIP_KERNEL
|#define foo (*(foo_type *)XIP_FIXUP(&foo))
|#endif
Follow the same way for pt_ops to unify the style and to simplify code.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Try our best to replace the conditional compilation using
"#ifdef CONFIG_64BIT" by a check for "IS_ENABLED(CONFIG_64BIT)", to
simplify the code and to increase compile coverage.
Now we can also remove the __maybe_unused used in max_mapped_addr
declaration.
We also remove the BUG_ON check of mapping the last 4K bytes of the
addressable memory since this is always true for every kernel actually.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The is_kdump_kernel() returns false for !CRASH_DUMP case, so we don't
need the #ifdef CONFIG_CRASH_DUMP for is_kdump_kernel() checking.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, if 64BIT and !XIP_KERNEL, the phys_ram_base is always 0,
no matter the real start of dram reported by memblock is.
Fixes: 6d7f91d914 ("riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When allocating crash kernel region without explicitly specifying its
base address/size, memblock_phys_alloc_range will attempt to allocate
memory top to bottom (memblock.bottom_up is false), so the crash
kernel region will end up in highmem on 64bit systems. This way
swiotlb can't work on the crash kernel, since there won't be any
32bit addressible memory available for the bounce buffers.
Try to allocate 32bit addressible memory if available, for the
crash kernel by restricting the top search address to be less
than SZ_4G. If that fails fallback to the previous behavior.
I tested this on HiFive Unmatched where the pci-e controller needs
swiotlb to work, with this patch it's possible to access the pci-e
controller on crash kernel and mount the rootfs from the nvme.
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Fixes: e53d28180d ("RISC-V: Add kdump support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
After commit 1355c31eeb ("asm-generic: pgalloc: provide generic
pmd_alloc_one() and pmd_free_one()"), the main part to support
PMD split page table lock is in asm-generic/pgalloc.h.
The only change is add pgtable_pmd_page_ctor() into alloc_pmd_late(),
then we could enable ARCH_ENABLE_SPLIT_PMD_PTLOCK for RV64.
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently there's a limit of 8MB for the .text section of a RISC-V
image in the XIP case. This breaks compilation of many automatic
builds and is generally inconvenient. This patch removes that
limitation and optimizes XIP image file size at the same time.
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
* Support for PC-relative instructions (auipc and branches) in kprobes.
* Support for forced IRQ threading.
* Support for the hlt/nohlt kernel command line options, via the generic
idle loop.
* Support for showing the edge/level triggered behavior of interrupts in
/proc/interrupts.
* A handful of cleanups to our address mapping mechanisms.
* Support for allocating gigantic hugepages via CMA.
* Support for the undefined behavior sanitizer.
* A handful of cleanups to the VDSO that allow the kernel to build with
LLD.
* Support for hugepage migration.
-----BEGIN PGP SIGNATURE-----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=rDB3
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.15-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- support PC-relative instructions (auipc and branches) in kprobes
- support for forced IRQ threading
- support for the hlt/nohlt kernel command line options, via the
generic idle loop
- show the edge/level triggered behavior of interrupts
in /proc/interrupts
- a handful of cleanups to our address mapping mechanisms
- support for allocating gigantic hugepages via CMA
- support for the undefined behavior sanitizer (UBSAN)
- a handful of cleanups to the VDSO that allow the kernel to build with
LLD.
- support for hugepage migration
* tag 'riscv-for-linus-5.15-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
riscv: add support for hugepage migration
RISC-V: Fix VDSO build for !MMU
riscv: use strscpy to replace strlcpy
riscv: explicitly use symbol offsets for VDSO
riscv: Enable Undefined Behavior Sanitizer UBSAN
riscv: Keep the riscv Kconfig selects sorted
riscv: Support allocating gigantic hugepages using CMA
riscv: fix the global name pfn_base confliction error
riscv: Move early fdt mapping creation in its own function
riscv: Simplify BUILTIN_DTB device tree mapping handling
riscv: Use __maybe_unused instead of #ifdefs around variable declarations
riscv: Get rid of map_size parameter to create_kernel_page_table
riscv: Introduce va_kernel_pa_offset for 32-bit kernel
riscv: Optimize kernel virtual address conversion macro
dt-bindings: riscv: add starfive jh7100 bindings
riscv: Enable GENERIC_IRQ_SHOW_LEVEL
riscv: Enable idle generic idle loop
riscv: Allow forced irq threading
riscv: Implement thread_struct whitelist for hardened usercopy
riscv: kprobes: implement the branch instructions
...
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
There are a lot of uses of memblock_find_in_range() along with
memblock_reserve() from the times memblock allocation APIs did not exist.
memblock_find_in_range() is the very core of memblock allocations, so any
future changes to its internal behaviour would mandate updates of all the
users outside memblock.
Replace the calls to memblock_find_in_range() with an equivalent calls to
memblock_phys_alloc() and memblock_phys_alloc_range() and make
memblock_find_in_range() private method of memblock.
This simplifies the callers, ensures that (unlikely) errors in
memblock_reserve() are handled and improves maintainability of
memblock_find_in_range().
Link: https://lkml.kernel.org/r/20210816122622.30279-1-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Kirill A. Shutemov <kirill.shtuemov@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [ACPI]
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Nick Kossifidis <mick@ics.forth.gr> [riscv]
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
RISC-V uses platform-specific code to locate the elf core header in
memory. However, this does not conform to the standard
"linux,elfcorehdr" DT bindings, as it relies on a reserved memory node
with the "linux,elfcorehdr" compatible value, instead of on a
"linux,elfcorehdr" property under the "/chosen" node.
The non-compliant code can just be removed, as the standard behavior is
already implemented by platform-agnostic handling in the FDT core code.
Fixes: 5640975003 ("RISC-V: Add crash kernel support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/41c75d6ee3114ae6304f8afe0051895af91200ee.1628670468.git.geert+renesas@glider.be
This patch adds support to allocate gigantic hugepages using CMA by
specifying the hugetlb_cma= kernel parameter. This is only supported on
RV64.
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
RISCV uses a global variable pfn_base for page/pfn translation. But this
is a common name and will be used elsewhere. In those cases, the
page-pfn macros which refer to this name will be referred to the
local/input variable instead. (such as in vfio_pin_pages_remote). This
make everything wrong.
This patch changes the name from pfn_base to riscv_pfn_base to fix
this problem.
Signed-off-by: Kenneth Lee <liguozhu@hisilicon.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The current comment states that we check if the 64-bit kernel mapping
overlaps with the last 4K of the address space that is reserved to
error values in create_kernel_page_table, which is not the case since it
is done in setup_vm. But anyway, remove the reference to any function
and simply note that in 64-bit kernel, the check should be done as soon
as the kernel mapping base address is known.
Fixes: db6b84a368 ("riscv: Make sure the kernel mapping does not overlap with IS_ERR_VALUE")
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The code that handles the early fdt mapping is hard to read and does not
create the same mapping size depending on the kernel:
- for 64-bit, 2 PMD entries are used which amounts to a 4MB mapping
- for 32-bit, 2 PGDIR entries are used which amounts to a 8MB mapping
So keep using 2 PMD entries for 64-bit and use only one PGD entry for
32-bit needed to cover 4MB. Move that into a new function called
create_fdt_early_page_table which, using the same naming as
create_kernel_page_table.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
__PAGETABLE_PMD_FOLDED defines a 2-level page table that is only used in
32-bit kernel, so there is no need to check for CONFIG_64BIT in #ifndef
__PAGETABLE_PMD_FOLDED and vice-versa.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This allows to simplify the code and make it more readable.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The kernel must always be mapped using PMD_SIZE, and this is already the
case, this just simplifies create_kernel_page_table.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
va_kernel_pa_offset was only used for 64-bit as the kernel mapping lies
in the linear mapping for 32-bit kernel and then only the offset between
the PAGE_OFFSET and the kernel load address is needed.
But this distinction complexifies the code with #ifdefs and especially
with a separate definition of the address conversions macros.
Simplify the code by defining this variable for both 32-bit and 64-bit.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The usage of CONFIG_PHYS_RAM_BASE for all kernel types was a mistake:
this value is implementation-specific and this breaks the genericity of
the RISC-V kernel.
Fix this by introducing a new variable phys_ram_base that holds this
value at runtime and use it in the kernel physical address conversion
macro. Since this value is used only for XIP kernels, evaluate it only if
CONFIG_XIP_KERNEL is set which in addition optimizes this macro for
standard kernels at compile-time.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 44c9225729 ("RISC-V: enable XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The check that is done in setup_bootmem currently only works for 32-bit
kernel since the kernel mapping has been moved outside of the linear
mapping for 64-bit kernel. So make sure that for 64-bit kernel, the kernel
mapping does not overlap with the last 4K of the addressable memory.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Fixes: 2bfc6cd81b ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
For 64-bit kernel, the end of the address space is occupied by the
kernel mapping and currently, the functions to populate the kernel page
tables (i.e. create_p*d_mapping) do not override existing mapping so we
must make sure the linear mapping does not map memory in the kernel mapping
by clipping the memory above the memory limit.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Fixes: c9811e379b ("riscv: Add mem kernel parameter support")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
As described in Documentation/riscv/vm-layout.rst, the end of the
virtual address space for 64-bit kernel is occupied by the modules/BPF/
kernel mappings so this actually reduces the amount of memory we are able
to map and then use in the linear mapping. So make sure this limit is
correctly set.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Fixes: 2bfc6cd81b ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This contains a single fix for 32-bit boot. It happens this was already
fixed by c9811e379b ("riscv: Add mem kernel parameter support"), but
the bug existed before that feature addition so I've applied the patch
earlier and then merged it in (which results in a conflict, which is
fixed via not changing the resulting tree).
* riscv/riscv-fix-32bit:
riscv: Fix 32-bit RISC-V boot failure
Commit dd2d082b57 ("riscv: Cleanup setup_bootmem()") adjusted
the calling sequence in setup_bootmem(), which invalidates the fix
commit de043da0b9 ("RISC-V: Fix usage of memblock_enforce_memory_limit")
did for 32-bit RISC-V unfortunately.
So now 32-bit RISC-V does not boot again when testing booting kernel
on QEMU 'virt' with '-m 2G', which was exactly what the original
commit de043da0b9 ("RISC-V: Fix usage of memblock_enforce_memory_limit")
tried to fix.
Fixes: dd2d082b57 ("riscv: Cleanup setup_bootmem()")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
We have a lot of variables that are used to hold kernel mapping addresses,
offsets between physical and virtual mappings and some others used for XIP
kernels: they are all defined at different places in mm/init.c, so group
them into a single structure with, for some of them, more explicit and concise
names.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This contains both the short-term fix for the W+X boot mappings and the
larger cleanup.
* riscv-wx-mappings:
riscv: Map the kernel with correct permissions the first time
riscv: Introduce set_kernel_memory helper
riscv: Simplify xip and !xip kernel address conversion macros
riscv: Remove CONFIG_PHYS_RAM_BASE_FIXED
riscv: mm: Fix W+X mappings at boot
For 64-bit kernels, we map all the kernel with write and execute
permissions and afterwards remove writability from text and executability
from data.
For 32-bit kernels, the kernel mapping resides in the linear mapping, so we
map all the linear mapping as writable and executable and afterwards we
remove those properties for unused memory and kernel mapping as
described above.
Change this behavior to directly map the kernel with correct permissions
and avoid going through the whole mapping to fix the permissions.
At the same time, this fixes an issue introduced by commit 2bfc6cd81b
("riscv: Move kernel mapping outside of linear mapping") as reported
here https://github.com/starfive-tech/linux/issues/17.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The memblock_enforce_memory_limit() could change the memblock
range, so move the dram_end assignment after it in bootmem_init(),
then support mem= cmdline.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
