Somebody working on this code asked what the deal was with NFSv4, since
this comment notes that it's v2/v3's statelessness that requires
sillyrename. Shouldn't hurt to document the answer.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Change explicit references to CONFIG_NFS_V4_1 to implicit ones
Get rid of the unnecessary defines in backchannel_rqst.c and
bc_svc.c: the Makefile takes care of those dependency.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use nfs_pageio_reset_read_mds and nfs_pageio_reset_write_mds instead of
completely reinitialising the struct nfs_pageio_descriptor.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
...and ensure that we recoalese to take into account differences in
differences in block sizes when falling back to write through the MDS.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
...and ensure that we recoalese to take into account differences in
block sizes when falling back to read through the MDS.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If an attempt to do pNFS fails, and we have to fall back to writing through
the MDS, then we may want to re-coalesce the requests that we already have
since the block size for the MDS read/writes may be different to that of
the DS read/writes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Instead of looking up the rsize and wsize, the routines that generate the
RPC requests should really be using the pg_bsize, since that is what we
use when deciding whether or not to coalesce write requests...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Split them up into two parts: one which sets up the struct nfs_read/write_data,
the other which sets up the actual RPC call or pNFS call.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we're writing back data, and the FLUSH_STABLE flag is set, then we
always want to use NFS_FILE_SYNC, since we're always in a situation where
we're doing page reclaim, and so we want to free up the page as quickly
as possible.
If we're in the FLUSH_COND_STABLE case, then we either want to use another
unstable write (if we have to do a commit anyway) or again, we want to
use NFS_FILE_SYNC because we know that we have no more pages to write
out.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Mark all deviceids established under an expired MDS clientid as invalid.
Stop all new i/o through DS and send through the MDS.
Don't use any new LAYOUTGETs that use the invalid deviceid. Purge all layouts
established under the expired MDS clientid.
Remove the MDS clientid deviceid and data servers reference
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since we take a reference to it, we really ought to pass the a pointer to
the layout header in the arguments instead of assuming that
NFS_I(inode)->layout will forever point to the correct object.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ask for whole file layouts. Until support for layout segments is fully
supported in the file layout code, discard non-whole file layouts.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The fact that the global device id cache holds a reference to the
nfs4_deviceid_node until it is invisible to rcu lookups implies that
we can always assume that the reference count is non-zero in
_find_get_deviceid.
Also clean up nfs4_put_deviceid_node and the removal of the device id
from the cache.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We need to ensure that the layouts are set up before we can decide to
coalesce requests. To do so, we want to further split up the struct
nfs_pageio_descriptor operations into an initialisation callback, a
coalescing test callback, and a 'do i/o' callback.
This patch cleans up the existing callback methods before adding the
'initialisation' callback.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When recovering open files and locks, the stateid should be tested
against the server and freed if it is invalid. This patch adds new
recovery functions for NFS v4.1.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
FREE_STATEID is used to tell the server that we want to free a stateid
that no longer has any locks associated with it. This allows the client
to reclaim locks without encountering edge conditions documented in
section 8.4.3 of RFC 5661.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch adds in the xdr for doing a TEST_STATEID call with a single
stateid. RFC 5661 allows multiple stateids to be tested in a single
call, but only testing one keeps things simpler for now.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the client is using NFS v4.1, then we can use SECINFO_NO_NAME to find
the secflavor for the initial mount. If the server doesn't support
SECINFO_NO_NAME then I fall back on the "guess and check" method used
for v4.0 mounts.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Layouts should be tracked per nfs_server (aka superblock)
instead of per struct nfs_client, which may have multiple FSIDs associated
with it.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
can be skipped if the "eir_server_scope" from the exchange_id proc differs from
previous calls.
Also, in the future server_scope will be useful for determining whether client
trunking is available
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Don't just use the first addr in the multipath list - instead, loop
over addresses when calling nfs4_set_ds_client() (which calls connect)
until it is successful.
Although this is not real multipath support, it's a quick fix to handle when
an MDS sends a list of addresses for a DS and some of the addr families are
unsupported or misconfigured (like no routable ipv6 addr assigned).
This will attempt all paths to the DS before giving up, instead of immediately
falling back to the MDS.
As before, an error encountered after a successful connect() will cause all
i/o to fall back to the MDS.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This parses and stores all addresses associated with each data server,
laying the groundwork for supporting multipath to data servers.
- Skips over addresses that cannot be parsed (ie IPv6 addrs if v6 is not
enabled). Only fails if none of the addresses are recognizable
- Currently only uses the first address that parsed cleanly
- Tested against pynfs server (modified to support multipath)
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Handle ipv6 remote addresses from GETDEVICEINFO
- supports netid "tcp" for ipv4 and "tcp6" for ipv6 as rfc 5665 specifies
- added ds_remotestr to avoid having to handle different AFs in every dprintk
- tested against pynfs 4.1 server, submitting ipv6 support patch to pynfs
- tested with IPv6 disabled, it compiles cleanly and relies on rpc_pton to
refuse to accept IPv6 addresses
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Attribute IDs assigned in RFC 5661 now require three bitmaps.
Fixes hitting a BUG_ON in xdr_shrink_bufhead when getting ACLs.
Signed-off-by: Andy Adamson <andros@netapp.com>
Cc:stable@kernel.org [2.6.39]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In current pnfs tree, all the layouts set mds_offset in their
.write_pagelist member.
mds_offset is only used by generic layer and should be handled by it.
This patch is for upstream. It is needed in this -rc series to fix a
bug in objects layout_commit.
I'll send patches for objects and blocks to be
squashed into current pnfs tree.
TODO: It looks like the read path needs the same patch.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I initially did the calculation in bytes, and not words
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
1. If the intention is to coalesce requests 'prev' and 'req' then we
have to ensure at least that we have a layout starting at
req_offset(prev).
2. If we're only requesting a minimal layout of length desc->pg_count,
we need to test the length actually returned by the server before
we allow the coalescing to occur.
3. We need to deal correctly with (pgio->lseg == NULL)
4. Fixup the test guarding the pnfs_update_layout.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Otherwise we end up overflowing the rpc buffer size on the receive end.
Signed-off-by: Benny Halevy <benny@tonian.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Andy's last device_cache patches, already take an extra
reference on the newly inserted device_id. So we can remove it
from obj-io.
Without this patch the device_ids are leaked.
Andy's patches are not in Linus tree yet. So I'm not sure if they are
scheduled for this Kernel or the next. This patch should be added as
part of these.
CC: Andy Adamson <andros@netapp.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Commit 7ebb9315 (NFS: use secinfo when crossing mountpoints) introduces
a regression when decoding an NFSv4 readdir entry that sets the
rdattr_error field.
By treating the resulting value as if it is a decoding error, the current
code may cause us to skip valid readdir entries.
Reported-by: Andy Adamson <andros@netapp.com>
Cc: stable@kernel.org [2.6.39]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
mark_matching_lsegs_invalid could put the last ref to the layout, so
the get_layout_hdr needs to be called first.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We always get a reference on the layout header and we rely on
nfs4_layoutreturn_release to put it. If we hit an allocation error
before starting the rpc proc we bail out early without dereferncing
the layout header properly.
Signed-off-by: Benny Halevy <benny@tonian.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(d)printks should use %zd for ssize_t arguments not %ld, otherwise they might
get a warning. I see the following with MN10300.
fs/nfs/objlayout/objlayout.c: In function 'objlayout_read_done':
fs/nfs/objlayout/objlayout.c:294: warning: format '%ld' expects type 'long int', but argument 3 has type 'ssize_t'
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Trond Myklebust <Trond.Myklebust@netapp.com>
cc: linux-nfs@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The break condition to skip out of the loop got broken when cmp_layout
was change. Essentially, we want to stop looking once we know no layout
on the remainder of the list can match the first byte of the looked-up
range.
Reported-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Benny Halevy <benny@tonian.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
_pnfs_return_layout had the following problems:
- it did not call pnfs_free_lseg_list on all paths
- it unintentionally did a forgetful return when there was no outstanding io
- it raced with concurrent LAYOUTGETS
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Commit 28331a46d8 "Ensure we request the
ordinary fileid when doing readdirplus"
changed the meaning of NFS_ATTR_FATTR_FILEID which used to be set when
FATTR4_WORD1_MOUNTED_ON_FILED was requested.
Allow nfs_fhget to succeed with only a mounted on fileid when crossing
a mountpoint or a referral.
Ask for the fileid of the absent file system if mounted_on_fileid is not
supported.
Signed-off-by: Andy Adamson <andros@netapp.com>
cc:stable@kernel.org [2.6.39]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When we add something to the global device id cache, we need to bump the
reference count, so that the cache itself holds a reference.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We don't support header padding yet so better off ditching it
Reported-by: Sid Moore <learnmost@gmail.com>
Signed-off-by: Benny Halevy <benny@tonian.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_update_inode will update isize if there is no queued pages. For pNFS,
layoutcommit is supposed to change file size on server, the same effect as queued
pages. nfs_update_inode may be called when dirty pages are written back (nfsi->npages==0)
but layoutcommit is not sent, and it will change client file size according to server
file size. Then client ends up losing what it just writes back in pNFS path.
So we should skip updating client file size if file needs layoutcommit.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Cc: stable@kernel.org [2.6.39]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Unmounting a pnfs filesystem hangs using filelayout and possibly others.
This fixes the use of the rcu protected node by making use of a new 'tmpnode'
for the temporary purge list. Also, the spinlock shouldn't be held when calling
synchronize_rcu().
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
