The CALL_ON_STACK macro is used to call a C function from inline
assembly, and therefore must consider the C ABI, which says that only
registers 6-13, and 15 are non-volatile (restored by the called
function).
The inline assembly incorrectly marks all registers used to pass
parameters to the called function as read-only input operands, instead
of operands that are read and written to. This might result in
register corruption depending on usage, compiler, and compile options.
Fix this by marking all operands used to pass parameters as read/write
operands. To keep the code simple even register 6, if used, is marked
as read-write operand.
Fixes: ff340d2472 ("s390: add stack switch helper")
Cc: <stable@kernel.org> # 4.20
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The current code doesn't clear the thread/group maps for offline
CPUs. This may cause kernel crashes like the one bewlow in common
code that assumes if a CPU has sibblings it is online.
Unable to handle kernel pointer dereference in virtual kernel address space
Call Trace:
[<000000013a4b8c3c>] blk_mq_map_swqueue+0x10c/0x388
([<000000013a4b8bcc>] blk_mq_map_swqueue+0x9c/0x388)
[<000000013a4b9300>] blk_mq_init_allocated_queue+0x448/0x478
[<000000013a4b9416>] blk_mq_init_queue+0x4e/0x90
[<000003ff8019d3e6>] loop_add+0x106/0x278 [loop]
[<000003ff801b8148>] loop_init+0x148/0x1000 [loop]
[<0000000139de4924>] do_one_initcall+0x3c/0x1e0
[<0000000139ef449a>] do_init_module+0x6a/0x2a0
[<0000000139ef61bc>] __do_sys_finit_module+0xa4/0xc0
[<0000000139de9e6e>] do_syscall+0x7e/0xd0
[<000000013a8e0aec>] __do_syscall+0xbc/0x110
[<000000013a8ee2e8>] system_call+0x78/0xa0
Fixes: 52aeda7acc ("s390/topology: remove offline CPUs from CPU topology masks")
Cc: <stable@kernel.org> # 5.7+
Reported-by: Marius Hillenbrand <mhillen@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The mdev remove callback for the vfio_ap device driver bails out with
-EBUSY if the mdev is in use by a KVM guest (i.e., the KVM pointer in the
struct ap_matrix_mdev is not NULL). The intended purpose was
to prevent the mdev from being removed while in use. There are two
problems with this scenario:
1. Returning a non-zero return code from the remove callback does not
prevent the removal of the mdev.
2. The KVM pointer in the struct ap_matrix_mdev will always be NULL because
the remove callback will not get invoked until the mdev fd is closed.
When the mdev fd is closed, the mdev release callback is invoked and
clears the KVM pointer from the struct ap_matrix_mdev.
Let's go ahead and remove the check for KVM in the remove callback and
allow the cleanup of mdev resources to proceed.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20210609224634.575156-2-akrowiak@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The current irq entry code doesn't initialize pt_regs::flags. On exit to
user mode arch_do_signal_or_restart() tests whether PIF_SYSCALL is set,
which might yield wrong results.
Fix this by clearing pt_regs::flags in the entry.S irq handler
code.
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Fixes: 56e62a7370 ("s390: convert to generic entry")
Cc: <stable@vger.kernel.org> # 5.12
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
glibc complained with "The futex facility returned an unexpected error
code.". It turned out that the futex syscall returned -ERESTARTSYS because
a signal is pending. arch_do_signal_or_restart() restored the syscall
parameters (nameley regs->gprs[2]) and set PIF_SYSCALL_RESTART. When
another signal is made pending later in the exit loop
arch_do_signal_or_restart() is called again. This function clears
PIF_SYSCALL_RESTART and checks the return code which is set in
regs->gprs[2]. However, regs->gprs[2] was restored in the previous run
and no longer contains -ERESTARTSYS, so PIF_SYSCALL_RESTART isn't set
again and the syscall is skipped.
Fix this by not clearing PIF_SYSCALL_RESTART - it is already cleared in
__do_syscall() when the syscall is restarted.
Reported-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Fixes: 56e62a7370 ("s390: convert to generic entry")
Cc: <stable@vger.kernel.org> # 5.12
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----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=KnMk
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v5.13_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
"A single fix to restore fairness between control groups with equal
priority"
* tag 'sched_urgent_for_v5.13_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Correctly insert cfs_rq's to list on unthrottle
-----BEGIN PGP SIGNATURE-----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=Ss4I
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v5.13_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
"A single fix for GICv3 to not take an interrupt in an NMI context"
* tag 'irq_urgent_for_v5.13_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Workaround inconsistent PMR setting on NMI entry
(There's a lot more in the pipe):
- Prevent corruption of the XSTATE buffer in signal handling by
validating what is being copied from userspace first.
- Invalidate other task's preserved FPU registers on XRSTOR failure
(#PF) because latter can still modify some of them.
- Restore the proper PKRU value in case userspace modified it
- Reset FPU state when signal restoring fails
Other:
- Map EFI boot services data memory as encrypted in a SEV guest so that
the guest can access it and actually boot properly
- Two SGX correctness fixes: proper resources freeing and a NUMA fix
-----BEGIN PGP SIGNATURE-----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=AuXr
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.13_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"A first set of urgent fixes to the FPU/XSTATE handling mess^W code.
(There's a lot more in the pipe):
- Prevent corruption of the XSTATE buffer in signal handling by
validating what is being copied from userspace first.
- Invalidate other task's preserved FPU registers on XRSTOR failure
(#PF) because latter can still modify some of them.
- Restore the proper PKRU value in case userspace modified it
- Reset FPU state when signal restoring fails
Other:
- Map EFI boot services data memory as encrypted in a SEV guest so
that the guest can access it and actually boot properly
- Two SGX correctness fixes: proper resources freeing and a NUMA fix"
* tag 'x86_urgent_for_v5.13_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Avoid truncating memblocks for SGX memory
x86/sgx: Add missing xa_destroy() when virtual EPC is destroyed
x86/fpu: Reset state for all signal restore failures
x86/pkru: Write hardware init value to PKRU when xstate is init
x86/process: Check PF_KTHREAD and not current->mm for kernel threads
x86/fpu: Invalidate FPU state after a failed XRSTOR from a user buffer
x86/fpu: Prevent state corruption in __fpu__restore_sig()
x86/ioremap: Map EFI-reserved memory as encrypted for SEV
Fix initrd corruption caused by our recent change to use relative jump labels.
Fix a crash using perf record on systems without a hardware PMU backend.
Rework our 64-bit signal handling slighty to make it more closely match the old behaviour,
after the recent change to use unsafe user accessors.
Thanks to: Anastasia Kovaleva, Athira Rajeev, Christophe Leroy, Daniel Axtens, Greg Kurz,
Roman Bolshakov.
-----BEGIN PGP SIGNATURE-----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=Qrh9
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.13-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix initrd corruption caused by our recent change to use relative jump
labels.
Fix a crash using perf record on systems without a hardware PMU
backend.
Rework our 64-bit signal handling slighty to make it more closely
match the old behaviour, after the recent change to use unsafe user
accessors.
Thanks to Anastasia Kovaleva, Athira Rajeev, Christophe Leroy, Daniel
Axtens, Greg Kurz, and Roman Bolshakov"
* tag 'powerpc-5.13-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/perf: Fix crash in perf_instruction_pointer() when ppmu is not set
powerpc: Fix initrd corruption with relative jump labels
powerpc/signal64: Copy siginfo before changing regs->nip
powerpc/mem: Add back missing header to fix 'no previous prototype' error
* A build fix to always build modules with the medany code model, as
the module loader doesn't support medlow.
* A Kconfig warning fix for the SiFive errata.
* A pair of fixes that for regressions to the recent memory layout
changes.
* A fix for the FU740 device tree.
-----BEGIN PGP SIGNATURE-----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=HsNS
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A build fix to always build modules with the 'medany' code model, as
the module loader doesn't support 'medlow'.
- A Kconfig warning fix for the SiFive errata.
- A pair of fixes that for regressions to the recent memory layout
changes.
- A fix for the FU740 device tree.
* tag 'riscv-for-linus-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: fu740: fix cache-controller interrupts
riscv: Ensure BPF_JIT_REGION_START aligned with PMD size
riscv: kasan: Fix MODULES_VADDR evaluation due to local variables' name
riscv: sifive: fix Kconfig errata warning
riscv32: Use medany C model for modules
pending requests are purged.
- Two fixes for the machine check handler in the entry code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmDNvpgACgkQjYWKoQLX
FBiuvQf/VrYPeFQotoit8ZQm5EUUMHeryxp3DVOeHFilPdANbVh1Q++NxZvf2XSw
ejDUwTBuWaMmb2U8/7Yp+dbLYRu6XGKVKHLIArkXzsDzUNaJ+tMszAVKDK+SRHYe
zaBYMG6Lfn/ByoME1rqQZ6e/dx+4f0rzorR5A8IlslsSFFyTzt8CSLnrDcu6aj4i
bGSf8lS7dMoy49OYzuNYaPl2KcPEyrWMB//vuwj5jDru3eJcqW/m/q/7JRskTicm
YsRw0x2waDs2x+SOQJ+haSrNRGY9YKSVUISVgDPX0Yz4PF9noNq1iOCRfu5JcrcR
vlm3rJI8uFdZ8p4ZUMJHMS7T7Z5bRg==
=GRT1
-----END PGP SIGNATURE-----
Merge tag 's390-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix zcrypt ioctl hang due to AP queue msg counter dropping below 0
when pending requests are purged.
- Two fixes for the machine check handler in the entry code.
* tag 's390-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ap: Fix hanging ioctl caused by wrong msg counter
s390/mcck: fix invalid KVM guest condition check
s390/mcck: fix calculation of SIE critical section size
To pick the changes in:
3218274773 ("icmp: don't send out ICMP messages with a source address of 0.0.0.0")
That don't result in any change in tooling, as INADDR_ are not used to
generate id->string tables used by 'perf trace'.
This addresses this build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: David S. Miller <davem@davemloft.net>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
8b1462b67f ("quota: finish disable quotactl_path syscall")
Those headers are used in some arches to generate the syscall table used
in 'perf trace' to translate syscall numbers into strings.
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Jan Kara <jack@suse.cz>
Cc: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
ea6932d70e ("net: make get_net_ns return error if NET_NS is disabled")
That don't result in any changes in the tables generated from that
header.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Cc: Changbin Du <changbin.du@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$(( .. )) is a bash feature but the test's interpreter is !/bin/sh,
switch the code to use expr.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210617184216.2075588-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ASan reported a memory leak of BPF-related ksymbols map and dso. The
leak is caused by refount never reaching 0, due to missing __put calls
in the function machine__process_ksymbol_register.
Once the dso is inserted in the map, dso__put() should be called
(map__new2() increases the refcount to 2).
The same thing applies for the map when it's inserted into maps
(maps__insert() increases the refcount to 2).
$ sudo ./perf record -- sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ]
=================================================================
==297735==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 6992 byte(s) in 19 object(s) allocated from:
#0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
#1 0x8e4e53 in map__new2 /home/user/linux/tools/perf/util/map.c:216:20
#2 0x8cf68c in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:778:10
[...]
Indirect leak of 8702 byte(s) in 19 object(s) allocated from:
#0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
#1 0x8728d7 in dso__new_id /home/user/linux/tools/perf/util/dso.c:1256:20
#2 0x872015 in dso__new /home/user/linux/tools/perf/util/dso.c:1295:9
#3 0x8cf623 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:774:21
[...]
Indirect leak of 1520 byte(s) in 19 object(s) allocated from:
#0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
#1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23
#2 0x888954 in map__process_kallsym_symbol /home/user/linux/tools/perf/util/symbol.c:710:8
[...]
Indirect leak of 1406 byte(s) in 19 object(s) allocated from:
#0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
#1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23
#2 0x8cfbd8 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:803:8
[...]
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Link: http://lore.kernel.org/lkml/20210612173751.188582-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The error code is not set at all in the sys event iter function.
This may lead to an uninitialized value of "ret" in
metricgroup__add_metric() when no CPU metric is added.
Fix by properly setting the error code.
It is not necessary to init "ret" to 0 in metricgroup__add_metric(), as
if we have no CPU or sys event metric matching, then "has_match" should
be 0 and "ret" is set to -EINVAL.
However gcc cannot detect that it may not have been set after the
map_for_each_metric() loop for CPU metrics, which is strange.
Fixes: be335ec28e ("perf metricgroup: Support adding metrics for system PMUs")
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1623335580-187317-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following command segfaults on my x86 broadwell:
$ ./perf stat -M frontend_bound,retiring,backend_bound,bad_speculation sleep 1
WARNING: grouped events cpus do not match, disabling group:
anon group { raw 0x10e }
anon group { raw 0x10e }
perf: util/evsel.c:1596: get_group_fd: Assertion `!(!leader->core.fd)' failed.
Aborted (core dumped)
The issue shows itself as a use-after-free in evlist__check_cpu_maps(),
whereby the leader of an event selector (evsel) has been deleted (yet we
still attempt to verify for an evsel).
Fundamentally the problem comes from metricgroup__setup_events() ->
find_evsel_group(), and has developed from the previous fix attempt in
commit 9c880c24cb ("perf metricgroup: Fix for metrics containing
duration_time").
The problem now is that the logic in checking if an evsel is in the same
group is subtly broken for the "cycles" event. For the "cycles" event,
the pmu_name is NULL; however the logic in find_evsel_group() may set an
event matched against "cycles" as used, when it should not be.
This leads to a condition where an evsel is set, yet its leader is not.
Fix the check for evsel pmu_name by not matching evsels when either has a
NULL pmu_name.
There is still a pre-existing metric issue whereby the ordering of the
metrics may break the 'stat' function, as discussed at:
https://lore.kernel.org/lkml/49c6fccb-b716-1bf0-18a6-cace1cdb66b9@huawei.com/
Fixes: 9c880c24cb ("perf metricgroup: Fix for metrics containing duration_time")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> # On a Thinkpad T450S
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1623335580-187317-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The order of interrupt numbers is incorrect.
The order for FU740 is: DirError, DataError, DataFail, DirFail
From SiFive FU740-C000 Manual:
19 - L2 Cache DirError
20 - L2 Cache DirFail
21 - L2 Cache DataError
22 - L2 Cache DataFail
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Andreas reported commit fc8504765e ("riscv: bpf: Avoid breaking W^X")
breaks booting with one kind of defconfig, I reproduced a kernel panic
with the defconfig:
[ 0.138553] Unable to handle kernel paging request at virtual address ffffffff81201220
[ 0.139159] Oops [#1]
[ 0.139303] Modules linked in:
[ 0.139601] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc5-default+ #1
[ 0.139934] Hardware name: riscv-virtio,qemu (DT)
[ 0.140193] epc : __memset+0xc4/0xfc
[ 0.140416] ra : skb_flow_dissector_init+0x1e/0x82
[ 0.140609] epc : ffffffff8029806c ra : ffffffff8033be78 sp : ffffffe001647da0
[ 0.140878] gp : ffffffff81134b08 tp : ffffffe001654380 t0 : ffffffff81201158
[ 0.141156] t1 : 0000000000000002 t2 : 0000000000000154 s0 : ffffffe001647dd0
[ 0.141424] s1 : ffffffff80a43250 a0 : ffffffff81201220 a1 : 0000000000000000
[ 0.141654] a2 : 000000000000003c a3 : ffffffff81201258 a4 : 0000000000000064
[ 0.141893] a5 : ffffffff8029806c a6 : 0000000000000040 a7 : ffffffffffffffff
[ 0.142126] s2 : ffffffff81201220 s3 : 0000000000000009 s4 : ffffffff81135088
[ 0.142353] s5 : ffffffff81135038 s6 : ffffffff8080ce80 s7 : ffffffff80800438
[ 0.142584] s8 : ffffffff80bc6578 s9 : 0000000000000008 s10: ffffffff806000ac
[ 0.142810] s11: 0000000000000000 t3 : fffffffffffffffc t4 : 0000000000000000
[ 0.143042] t5 : 0000000000000155 t6 : 00000000000003ff
[ 0.143220] status: 0000000000000120 badaddr: ffffffff81201220 cause: 000000000000000f
[ 0.143560] [<ffffffff8029806c>] __memset+0xc4/0xfc
[ 0.143859] [<ffffffff8061e984>] init_default_flow_dissectors+0x22/0x60
[ 0.144092] [<ffffffff800010fc>] do_one_initcall+0x3e/0x168
[ 0.144278] [<ffffffff80600df0>] kernel_init_freeable+0x1c8/0x224
[ 0.144479] [<ffffffff804868a8>] kernel_init+0x12/0x110
[ 0.144658] [<ffffffff800022de>] ret_from_exception+0x0/0xc
[ 0.145124] ---[ end trace f1e9643daa46d591 ]---
After some investigation, I think I found the root cause: commit
2bfc6cd81b ("move kernel mapping outside of linear mapping") moves
BPF JIT region after the kernel:
| #define BPF_JIT_REGION_START PFN_ALIGN((unsigned long)&_end)
The &_end is unlikely aligned with PMD size, so the front bpf jit
region sits with part of kernel .data section in one PMD size mapping.
But kernel is mapped in PMD SIZE, when bpf_jit_binary_lock_ro() is
called to make the first bpf jit prog ROX, we will make part of kernel
.data section RO too, so when we write to, for example memset the
.data section, MMU will trigger a store page fault.
To fix the issue, we need to ensure the BPF JIT region is PMD size
aligned. This patch acchieve this goal by restoring the BPF JIT region
to original position, I.E the 128MB before kernel .text section. The
modification to kasan_init.c is inspired by Alexandre.
Fixes: fc8504765e ("riscv: bpf: Avoid breaking W^X")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
commit 2bfc6cd81b ("riscv: Move kernel mapping outside of linear
mapping") makes use of MODULES_VADDR to populate kernel, BPF, modules
mapping. Currently, MODULES_VADDR is defined as below for RV64:
| #define MODULES_VADDR (PFN_ALIGN((unsigned long)&_end) - SZ_2G)
But kasan_init() has two local variables which are also named as _start,
_end, so MODULES_VADDR is evaluated with the local variable _end
rather than the global "_end" as we expected. Fix this issue by
renaming the two local variables.
Fixes: 2bfc6cd81b ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
bluetooth, netfilter and can.
Current release - regressions:
- mlxsw: spectrum_qdisc: Pass handle, not band number to find_class()
to fix modifying offloaded qdiscs
- lantiq: net: fix duplicated skb in rx descriptor ring
- rtnetlink: fix regression in bridge VLAN configuration, empty info
is not an error, bot-generated "fix" was not needed
- libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix
umem creation
Current release - new code bugs:
- ethtool: fix NULL pointer dereference during module EEPROM dump via
the new netlink API
- mlx5e: don't update netdev RQs with PTP-RQ, the special purpose queue
should not be visible to the stack
- mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs
- mlx5e: verify dev is present in get devlink port ndo, avoid a panic
Previous releases - regressions:
- neighbour: allow NUD_NOARP entries to be force GCed
- further fixes for fallout from reorg of WiFi locking
(staging: rtl8723bs, mac80211, cfg80211)
- skbuff: fix incorrect msg_zerocopy copy notifications
- mac80211: fix NULL ptr deref for injected rate info
- Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs
Previous releases - always broken:
- bpf: more speculative execution fixes
- netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local
- udp: fix race between close() and udp_abort() resulting in a panic
- fix out of bounds when parsing TCP options before packets
are validated (in netfilter: synproxy, tc: sch_cake and mptcp)
- mptcp: improve operation under memory pressure, add missing wake-ups
- mptcp: fix double-lock/soft lookup in subflow_error_report()
- bridge: fix races (null pointer deref and UAF) in vlan tunnel egress
- ena: fix DMA mapping function issues in XDP
- rds: fix memory leak in rds_recvmsg
Misc:
- vrf: allow larger MTUs
- icmp: don't send out ICMP messages with a source address of 0.0.0.0
- cdc_ncm: switch to eth%d interface naming
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xxUe
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc7, including fixes from wireless, bpf,
bluetooth, netfilter and can.
Current release - regressions:
- mlxsw: spectrum_qdisc: Pass handle, not band number to find_class()
to fix modifying offloaded qdiscs
- lantiq: net: fix duplicated skb in rx descriptor ring
- rtnetlink: fix regression in bridge VLAN configuration, empty info
is not an error, bot-generated "fix" was not needed
- libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix umem
creation
Current release - new code bugs:
- ethtool: fix NULL pointer dereference during module EEPROM dump via
the new netlink API
- mlx5e: don't update netdev RQs with PTP-RQ, the special purpose
queue should not be visible to the stack
- mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs
- mlx5e: verify dev is present in get devlink port ndo, avoid a panic
Previous releases - regressions:
- neighbour: allow NUD_NOARP entries to be force GCed
- further fixes for fallout from reorg of WiFi locking (staging:
rtl8723bs, mac80211, cfg80211)
- skbuff: fix incorrect msg_zerocopy copy notifications
- mac80211: fix NULL ptr deref for injected rate info
- Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs
Previous releases - always broken:
- bpf: more speculative execution fixes
- netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local
- udp: fix race between close() and udp_abort() resulting in a panic
- fix out of bounds when parsing TCP options before packets are
validated (in netfilter: synproxy, tc: sch_cake and mptcp)
- mptcp: improve operation under memory pressure, add missing
wake-ups
- mptcp: fix double-lock/soft lookup in subflow_error_report()
- bridge: fix races (null pointer deref and UAF) in vlan tunnel
egress
- ena: fix DMA mapping function issues in XDP
- rds: fix memory leak in rds_recvmsg
Misc:
- vrf: allow larger MTUs
- icmp: don't send out ICMP messages with a source address of 0.0.0.0
- cdc_ncm: switch to eth%d interface naming"
* tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (139 commits)
net: ethernet: fix potential use-after-free in ec_bhf_remove
selftests/net: Add icmp.sh for testing ICMP dummy address responses
icmp: don't send out ICMP messages with a source address of 0.0.0.0
net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY
net: ll_temac: Fix TX BD buffer overwrite
net: ll_temac: Add memory-barriers for TX BD access
net: ll_temac: Make sure to free skb when it is completely used
MAINTAINERS: add Guvenc as SMC maintainer
bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error path
bnxt_en: Fix TQM fastpath ring backing store computation
bnxt_en: Rediscover PHY capabilities after firmware reset
cxgb4: fix wrong shift.
mac80211: handle various extensible elements correctly
mac80211: reset profile_periodicity/ema_ap
cfg80211: avoid double free of PMSR request
cfg80211: make certificate generation more robust
mac80211: minstrel_ht: fix sample time check
net: qed: Fix memcpy() overflow of qed_dcbx_params()
net: cdc_eem: fix tx fixup skb leak
net: hamradio: fix memory leak in mkiss_close
...
-----BEGIN PGP SIGNATURE-----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=JbJO
-----END PGP SIGNATURE-----
Merge tag 'for-5.13-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix, for a space accounting bug in zoned mode. It happens
when a block group is switched back rw->ro and unusable bytes (due to
zoned constraints) are subtracted twice.
It has user visible effects so I consider it important enough for late
-rc inclusion and backport to stable"
* tag 'for-5.13-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix negative space_info->bytes_readonly
-----BEGIN PGP SIGNATURE-----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=CY2S
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Clear 64-bit flag for host bridge windows below 4GB to fix a resource
allocation regression added in -rc1 (Punit Agrawal)
- Fix tegra194 MCFG quirk build regressions added in -rc1 (Jon Hunter)
- Avoid secondary bus resets on TI KeyStone C667X devices (Antti
Järvinen)
- Avoid secondary bus resets on some NVIDIA GPUs (Shanker Donthineni)
- Work around FLR erratum on Huawei Intelligent NIC VF (Chiqijun)
- Avoid broken ATS on AMD Navi14 GPU (Evan Quan)
- Trust Broadcom BCM57414 NIC to isolate functions even though it
doesn't advertise ACS support (Sriharsha Basavapatna)
- Work around AMD RS690 BIOSes that don't configure DMA above 4GB
(Mikel Rychliski)
- Fix panic during PIO transfer on Aardvark controller (Pali Rohár)
* tag 'pci-v5.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: aardvark: Fix kernel panic during PIO transfer
PCI: Add AMD RS690 quirk to enable 64-bit DMA
PCI: Add ACS quirk for Broadcom BCM57414 NIC
PCI: Mark AMD Navi14 GPU ATS as broken
PCI: Work around Huawei Intelligent NIC VF FLR erratum
PCI: Mark some NVIDIA GPUs to avoid bus reset
PCI: Mark TI C667X to avoid bus reset
PCI: tegra194: Fix MCFG quirk build regressions
PCI: of: Clear 64-bit flag for non-prefetchable memory below 4GB
If a task is killed during a page fault, it does not currently call
sb_end_pagefault(), which means that the filesystem cannot be frozen
at any time thereafter. This may be reported by lockdep like this:
====================================
WARNING: fsstress/10757 still has locks held!
5.13.0-rc4-build4+ #91 Not tainted
------------------------------------
1 lock held by fsstress/10757:
#0: ffff888104eac530
(
sb_pagefaults
as filesystem freezing is modelled as a lock.
Fix this by removing all the direct returns from within the function,
and using 'ret' to indicate whether we were interrupted or successful.
Fixes: 1cf7a1518a ("afs: Implement shared-writeable mmap")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20210616154900.1958373-1-willy@infradead.org/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
static void ec_bhf_remove(struct pci_dev *dev)
{
...
struct ec_bhf_priv *priv = netdev_priv(net_dev);
unregister_netdev(net_dev);
free_netdev(net_dev);
pci_iounmap(dev, priv->dma_io);
pci_iounmap(dev, priv->io);
...
}
priv is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing priv
pointer. So, fix it by moving free_netdev() after pci_iounmap()
calls.
Fixes: 6af55ff52b ("Driver for Beckhoff CX5020 EtherCAT master module.")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* a minstrel HT sample check fix
* peer measurement could double-free on races
* certificate file generation at build time could
sometimes hang
* some parameters weren't reset between connections
in mac80211
* some extensible elements were treated as non-
extensible, possibly causuing bad connections
(or failures) if the AP adds data
-----BEGIN PGP SIGNATURE-----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=Nh7Q
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2021-06-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A couple of straggler fixes:
* a minstrel HT sample check fix
* peer measurement could double-free on races
* certificate file generation at build time could
sometimes hang
* some parameters weren't reset between connections
in mac80211
* some extensible elements were treated as non-
extensible, possibly causuing bad connections
(or failures) if the AP adds data
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a new icmp.sh selftest for testing that the kernel will respond
correctly with an ICMP unreachable message with the dummy (192.0.0.8)
source address when there are no IPv4 addresses configured to use as source
addresses.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When constructing ICMP response messages, the kernel will try to pick a
suitable source address for the outgoing packet. However, if no IPv4
addresses are configured on the system at all, this will fail and we end up
producing an ICMP message with a source address of 0.0.0.0. This can happen
on a box routing IPv4 traffic via v6 nexthops, for instance.
Since 0.0.0.0 is not generally routable on the internet, there's a good
chance that such ICMP messages will never make it back to the sender of the
original packet that the ICMP message was sent in response to. This, in
turn, can create connectivity and PMTUd problems for senders. Fortunately,
RFC7600 reserves a dummy address to be used as a source for ICMP
messages (192.0.0.8/32), so let's teach the kernel to substitute that
address as a last resort if the regular source address selection procedure
fails.
Below is a quick example reproducing this issue with network namespaces:
ip netns add ns0
ip l add type veth peer netns ns0
ip l set dev veth0 up
ip a add 10.0.0.1/24 dev veth0
ip a add fc00:dead:cafe:42::1/64 dev veth0
ip r add 10.1.0.0/24 via inet6 fc00:dead:cafe:42::2
ip -n ns0 l set dev veth0 up
ip -n ns0 a add fc00:dead:cafe:42::2/64 dev veth0
ip -n ns0 r add 10.0.0.0/24 via inet6 fc00:dead:cafe:42::1
ip netns exec ns0 sysctl -w net.ipv4.icmp_ratelimit=0
ip netns exec ns0 sysctl -w net.ipv4.ip_forward=1
tcpdump -tpni veth0 -c 2 icmp &
ping -w 1 10.1.0.1 > /dev/null
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on veth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 29, seq 1, length 64
IP 0.0.0.0 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
2 packets captured
2 packets received by filter
0 packets dropped by kernel
With this patch the above capture changes to:
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 31127, seq 1, length 64
IP 192.0.0.8 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Juliusz Chroboczek <jch@irif.fr>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As documented in Documentation/networking/driver.rst, the ndo_start_xmit
method must not return NETDEV_TX_BUSY under any normal circumstances, and
as recommended, we simply stop the tx queue in advance, when there is a
risk that the next xmit would cause a NETDEV_TX_BUSY return.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just as the initial check, we need to ensure num_frag+1 buffers available,
as that is the number of buffers we are going to use.
This fixes a buffer overflow, which might be seen during heavy network
load. Complete lockup of TEMAC was reproducible within about 10 minutes of
a particular load.
Fixes: 84823ff80f ("net: ll_temac: Fix race condition causing TX hang")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a couple of memory-barriers to ensure correct ordering of read/write
access to TX BDs.
In xmit_done, we should ensure that reading the additional BD fields are
only done after STS_CTRL_APP0_CMPLT bit is set.
When xmit_done marks the BD as free by setting APP0=0, we need to ensure
that the other BD fields are reset first, so we avoid racing with the xmit
path, which writes to the same fields.
Finally, making sure to read APP0 of next BD after the current BD, ensures
that we see all available buffers.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the skb pointer piggy-backed on the TX BD, we have a simple and
efficient way to free the skb buffer when the frame has been transmitted.
But in order to avoid freeing the skb while there are still fragments from
the skb in use, we need to piggy-back on the TX BD of the skb, not the
first.
Without this, we are doing use-after-free on the DMA side, when the first
BD of a multi TX BD packet is seen as completed in xmit_done, and the
remaining BDs are still being processed.
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: Bug fixes
This patchset includes 3 small bug fixes to reinitialize PHY capabilities
after firmware reset, setup the chip's internal TQM fastpath ring
backing memory properly for RoCE traffic, and to free ethtool related
memory if driver probe fails.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_ethtool_init() may have allocated some memory and we need to
call bnxt_ethtool_free() to properly unwind if bnxt_init_one()
fails.
Fixes: 7c38091814 ("bnxt_en: Refactor bnxt_init_one() and turn on TPA support on 57500 chips.")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TQM fastpath ring needs to be sized to store both the requester
and responder side of RoCE QPs in TQM for supporting bi-directional
tests. Fix bnxt_alloc_ctx_mem() to multiply the RoCE QPs by a factor of
2 when computing the number of entries for TQM fastpath ring. This
fixes an RX pipeline stall issue when running bi-directional max
RoCE QP tests.
Fixes: c7dd7ab4b2 ("bnxt_en: Improve TQM ring context memory sizing formulas.")
Signed-off-by: Rukhsana Ansari <rukhsana.ansari@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a missing bnxt_probe_phy() call in bnxt_fw_init_one() to
rediscover the PHY capabilities after a firmware reset. This can cause
some PHY related functionalities to fail after a firmware reset. For
example, in multi-host, the ability for any host to configure the PHY
settings may be lost after a firmware reset.
Fixes: ec5d31e3c1 ("bnxt_en: Handle firmware reset status during IF_UP.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- ARCv2 userspace ABI not populating a few registers
- Unbork CONFIG_HARDENED_USERCOPY for ARC
-----BEGIN PGP SIGNATURE-----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=F11Z
-----END PGP SIGNATURE-----
Merge tag 'arc-5.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- ARCv2 userspace ABI not populating a few registers
- Unbork CONFIG_HARDENED_USERCOPY for ARC
* tag 'arc-5.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: fix CONFIG_HARDENED_USERCOPY
ARCv2: save ABI registers across signal handling
- Have recordmcount check for valid st_shndx otherwise some archs may have
invalid references for the mcount location.
- Two fixes done for mapping pids to task names. Traces were not showing
the names of tasks when they should have.
- Fix to trace_clock_global() to prevent it from going backwards
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYMyrQBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmMvAP4/teh5R2Z1ms0S0JlUM6sS3miNP1t/
x2QQtk2xuzbgmwD/Vn+01//7VyRPGuFm9dD82vSizQiNrns0EHXHB2cEPAQ=
=UWEU
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Have recordmcount check for valid st_shndx otherwise some archs may
have invalid references for the mcount location.
- Two fixes done for mapping pids to task names. Traces were not
showing the names of tasks when they should have.
- Fix to trace_clock_global() to prevent it from going backwards
* tag 'trace-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do no increment trace_clock_global() by one
tracing: Do not stop recording comms if the trace file is being read
tracing: Do not stop recording cmdlines when tracing is off
recordmcount: Correct st_shndx handling
Remove recently added frequency invariance support from the CPPC
cpufreq driver, because it has turned out to be problematic and it
cannot be fixed properly on time for 5.13 (Viresh Kumar).
-----BEGIN PGP SIGNATURE-----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=tW38
-----END PGP SIGNATURE-----
Merge tag 'pm-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Remove recently added frequency invariance support from the CPPC
cpufreq driver, because it has turned out to be problematic and it
cannot be fixed properly on time for 5.13 (Viresh Kumar)"
* tag 'pm-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "cpufreq: CPPC: Add support for frequency invariance"
Here are 3 small USB fixes for reported problems for 5.13-rc7. They
include:
- disabling autosuspend for a cypress USB hub
- fixing the battery charger detection for the chipidea driver
- fixing a kernel panic in the dwc3 driver due to a previous
change in 5.13-rc1.
All have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYMx2AQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynxzwCfT3l+Po09jA4gzoM0O0A1UtnodGUAnA8ZoNLv
wNIq8x2ioaPtQT17k1W1
=/Sfd
-----END PGP SIGNATURE-----
Merge tag 'usb-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are three small USB fixes for reported problems for 5.13-rc7.
They include:
- disable autosuspend for a cypress USB hub
- fix the battery charger detection for the chipidea driver
- fix a kernel panic in the dwc3 driver due to a previous change in
5.13-rc1.
All have been in linux-next with no reported problems"
* tag 'usb-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: core: hub: Disable autosuspend for Cypress CY7C65632
usb: chipidea: imx: Fix Battery Charger 1.2 CDP detection
usb: dwc3: core: fix kernel panic when do reboot
tl;dr:
Several SGX users reported seeing the following message on NUMA systems:
sgx: [Firmware Bug]: Unable to map EPC section to online node. Fallback to the NUMA node 0.
This turned out to be the memblock code mistakenly throwing away SGX
memory.
=== Full Changelog ===
The 'max_pfn' variable represents the highest known RAM address. It can
be used, for instance, to quickly determine for which physical addresses
there is mem_map[] space allocated. The numa_meminfo code makes an
effort to throw out ("trim") all memory blocks which are above 'max_pfn'.
SGX memory is not considered RAM (it is marked as "Reserved" in the
e820) and is not taken into account by max_pfn. Despite this, SGX memory
areas have NUMA affinity and are enumerated in the ACPI SRAT table. The
existing SGX code uses the numa_meminfo mechanism to look up the NUMA
affinity for its memory areas.
In cases where SGX memory was above max_pfn (usually just the one EPC
section in the last highest NUMA node), the numa_memblock is truncated
at 'max_pfn', which is below the SGX memory. When the SGX code tries to
look up the affinity of this memory, it fails and produces an error message:
sgx: [Firmware Bug]: Unable to map EPC section to online node. Fallback to the NUMA node 0.
and assigns the memory to NUMA node 0.
Instead of silently truncating the memory block at 'max_pfn' and
dropping the SGX memory, add the truncated portion to
'numa_reserved_meminfo'. This allows the SGX code to later determine
the NUMA affinity of its 'Reserved' area.
Before, numa_meminfo looked like this (from 'crash'):
blk = { start = 0x0, end = 0x2080000000, nid = 0x0 }
{ start = 0x2080000000, end = 0x4000000000, nid = 0x1 }
numa_reserved_meminfo is empty.
With this, numa_meminfo looks like this:
blk = { start = 0x0, end = 0x2080000000, nid = 0x0 }
{ start = 0x2080000000, end = 0x4000000000, nid = 0x1 }
and numa_reserved_meminfo has an entry for node 1's SGX memory:
blk = { start = 0x4000000000, end = 0x4080000000, nid = 0x1 }
[ daveh: completely rewrote/reworked changelog ]
Fixes: 5d30f92e76 ("x86/NUMA: Provide a range-to-target_node lookup facility")
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fan Du <fan.du@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210617194657.0A99CB22@viggo.jf.intel.com
amdgpu:
- GFX9 and 10 powergating fixes
-----BEGIN PGP SIGNATURE-----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=2F0i
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Not much happening in fixes land this week only one PR for two amdgpu
powergating fixes was waiting for me, maybe something will show up
over the weekend, maybe not.
amdgpu:
- GFX9 and 10 powergating fixes"
* tag 'drm-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu/gfx10: enlarge CP_MEC_DOORBELL_RANGE_UPPER to cover full doorbell.
drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue.
Trying to start a new PIO transfer by writing value 0 in PIO_START register
when previous transfer has not yet completed (which is indicated by value 1
in PIO_START) causes an External Abort on CPU, which results in kernel
panic:
SError Interrupt on CPU0, code 0xbf000002 -- SError
Kernel panic - not syncing: Asynchronous SError Interrupt
To prevent kernel panic, it is required to reject a new PIO transfer when
previous one has not finished yet.
If previous PIO transfer is not finished yet, the kernel may issue a new
PIO request only if the previous PIO transfer timed out.
In the past the root cause of this issue was incorrectly identified (as it
often happens during link retraining or after link down event) and special
hack was implemented in Trusted Firmware to catch all SError events in EL3,
to ignore errors with code 0xbf000002 and not forwarding any other errors
to kernel and instead throw panic from EL3 Trusted Firmware handler.
Links to discussion and patches about this issue:
https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541
But the real cause was the fact that during link retraining or after link
down event the PIO transfer may take longer time, up to the 1.44s until it
times out. This increased probability that a new PIO transfer would be
issued by kernel while previous one has not finished yet.
After applying this change into the kernel, it is possible to revert the
mentioned TF-A hack and SError events do not have to be caught in TF-A EL3.
Link: https://lore.kernel.org/r/20210608203655.31228-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org # 7fbcb5da81 ("PCI: aardvark: Don't rely on jiffies while holding spinlock")
Although the AMD RS690 chipset has 64-bit DMA support, BIOS implementations
sometimes fail to configure the memory limit registers correctly.
The Acer F690GVM mainboard uses this chipset and a Marvell 88E8056 NIC. The
sky2 driver programs the NIC to use 64-bit DMA, which will not work:
sky2 0000:02:00.0: error interrupt status=0x8
sky2 0000:02:00.0 eth0: tx timeout
sky2 0000:02:00.0 eth0: transmit ring 0 .. 22 report=0 done=0
Other drivers required by this mainboard either don't support 64-bit DMA,
or have it disabled using driver specific quirks. For example, the ahci
driver has quirks to enable or disable 64-bit DMA depending on the BIOS
version (see ahci_sb600_enable_64bit() in ahci.c). This ahci quirk matches
against the SB600 SATA controller, but the real issue is almost certainly
with the RS690 PCI host that it was commonly attached to.
To avoid this issue in all drivers with 64-bit DMA support, fix the
configuration of the PCI host. If the kernel is aware of physical memory
above 4GB, but the BIOS never configured the PCI host with this
information, update the registers with our values.
[bhelgaas: drop PCI_DEVICE_ID_ATI_RS690 definition]
Link: https://lore.kernel.org/r/20210611214823.4898-1-mikel@mikelr.com
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
