When a port is created, its VLAN filters are not cleared by the
firmware. This causes tagged packets to be later dropped by the ingress
STP filters, which default to DISCARD state.
The above did not matter much until commit b5ce611fd9 ("mlxsw:
spectrum: Add devlink-trap support") where we exposed the drop reason to
users.
Without this patch, the drop reason users will see is not consistent. If
a port is enslaved to a VLAN-aware bridge and a packet with an invalid
VLAN tries to ingress the bridge, it will be dropped due to ingress STP
filter. If the VLAN is later enabled and then disabled, the packet will
be dropped by the ingress VLAN filter despite the above being a
seemingly NOP operation.
Fix this by clearing all the VLAN filters during port initialization.
Adjust the test accordingly.
Fixes: b5ce611fd9 ("mlxsw: spectrum: Add devlink-trap support")
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Tested-by: Alex Kushnarov <alexanderk@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There memset is indented incorrectly, remove the extraneous tabs.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The return statement is indented incorrectly, add in a missing
tab and remove an extraneous space after the return
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SDHCI controller on Tegra186 supports 40-bit addressing, which is
usually enough to address all of system memory. However, if the SDHCI
controller is behind an IOMMU, the address space can go beyond. This
happens on Tegra186 and later where the ARM SMMU has an input address
space of 48 bits. If the DMA API is backed by this ARM SMMU, the top-
down IOVA allocator will cause IOV addresses to be returned that the
SDHCI controller cannot access.
Unfortunately, prior to the introduction of the ->set_dma_mask() host
operation, the SDHCI core would set either a 64-bit DMA mask if the
controller claimed to support 64-bit addressing, or a 32-bit DMA mask
otherwise.
Since the full 64 bits cannot be addressed on Tegra, this had to be
worked around in commit 68481a7e1c ("mmc: tegra: Mark 64 bit dma
broken on Tegra186") by setting the SDHCI_QUIRK2_BROKEN_64_BIT_DMA
quirk, which effectively restricts the DMA mask to 32 bits.
One disadvantage of this is that dma_map_*() APIs will now try to use
the swiotlb to bounce DMA to addresses beyond of the controller's DMA
mask. This in turn caused degraded performance and can lead to
situations where the swiotlb buffer is exhausted, which in turn leads
to DMA transfers to fail.
With the recent introduction of the ->set_dma_mask() host operation,
this can now be properly fixed. For each generation of Tegra, the exact
supported DMA mask can be configured. This kills two birds with one
stone: it avoids the use of bounce buffers because system memory never
exceeds the addressable memory range of the SDHCI controllers on these
devices, and at the same time when an IOMMU is involved, it prevents
IOV addresses from being allocated beyond the addressible range of the
controllers.
Since the DMA mask is now properly handled, the 64-bit DMA quirk can be
removed.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
[treding@nvidia.com: provide more background in commit message]
Tested-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org # v4.15 +
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
We must not unconditionally set the DMA snoop bit; if the DMA API is
assuming that the device is not DMA coherent, and the device snoops the
CPU caches, the device can see stale cache lines brought in by
speculative prefetch.
This leads to the device seeing stale data, potentially resulting in
corrupted data transfers. Commonly, this results in a descriptor fetch
error such as:
mmc0: ADMA error
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00002202
mmc0: sdhci: Blk size: 0x00000008 | Blk cnt: 0x00000001
mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013
mmc0: sdhci: Present: 0x01f50008 | Host ctl: 0x00000038
mmc0: sdhci: Power: 0x00000003 | Blk gap: 0x00000000
mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x000040d8
mmc0: sdhci: Timeout: 0x00000003 | Int stat: 0x00000001
mmc0: sdhci: Int enab: 0x037f108f | Sig enab: 0x037f108b
mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002202
mmc0: sdhci: Caps: 0x35fa0000 | Caps_1: 0x0000af00
mmc0: sdhci: Cmd: 0x0000333a | Max curr: 0x00000000
mmc0: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x001d8a33
mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x3f400e00
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err: 0x00000009 | ADMA Ptr: 0x000000236d43820c
mmc0: sdhci: ============================================
mmc0: error -5 whilst initialising SD card
but can lead to other errors, and potentially direct the SDHCI
controller to read/write data to other memory locations (e.g. if a valid
descriptor is visible to the device in a stale cache line.)
Fix this by ensuring that the DMA snoop bit corresponds with the
behaviour of the DMA API. Since the driver currently only supports DT,
use of_dma_is_coherent(). Note that device_get_dma_attr() can not be
used as that risks re-introducing this bug if/when the driver is
converted to ACPI.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
ADMA errors are potentially data corrupting events; although we print
the register state, we do not usefully print the ADMA descriptors.
Worse than that, we print them by referencing their virtual address
which is meaningless when the register state gives us the DMA address
of the failing descriptor.
Print the ADMA descriptors giving their DMA addresses rather than their
virtual addresses, and print them using SDHCI_DUMP() rather than DBG().
We also do not show the correct value of the interrupt status register;
the register dump shows the current value, after we have cleared the
pending interrupts we are going to service. What is more useful is to
print the interrupts that _were_ pending at the time the ADMA error was
encountered. Fix that too.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Micrel KSZ9031 PHY may fail to establish a link when the Asymmetric
Pause capability is set. This issue is described in a Silicon Errata
(DS80000691D or DS80000692D), which advises to always disable the
capability.
Micrel KSZ9021 has no errata, but has the same issue with Asymmetric Pause.
This patch apply the same workaround as the one for KSZ9031.
Fixes: 3aed3e2a14 ("net: phy: micrel: add Asym Pause workaround")
Signed-off-by: Hans Andersson <hans.andersson@cellavision.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Until calling register_netdev(), ndev->dev_name isn't specified, and
netdev_err() displays "(unnamed net_device)".
ave 65000000.ethernet (unnamed net_device) (uninitialized): invalid phy-mode setting
ave: probe of 65000000.ethernet failed with error -22
This replaces netdev_err() with dev_err() before calling register_netdev().
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 415606588c ("PTP: introduce new versions of IOCTLs",
2019-09-13) introduced new versions of the PTP ioctls which actually
validate that the flags are acceptable values.
As part of this, it cleared the flags value using a bitwise
and+negation, in an attempt to prevent the old ioctl from accidentally
enabling new features.
This is incorrect for a couple of reasons. First, it results in
accidentally preventing previously working flags on the request ioctl.
By clearing the "valid" flags, we now no longer allow setting the
enable, rising edge, or falling edge flags.
Second, if we add new additional flags in the future, they must not be
set by the old ioctl. (Since the flag wasn't checked before, we could
potentially break userspace programs which sent garbage flag data.
The correct way to resolve this is to check for and clear all but the
originally valid flags.
Create defines indicating which flags are correctly checked and
interpreted by the original ioctls. Use these to clear any bits which
will not be correctly interpreted by the original ioctls.
In the future, new flags must be added to the VALID_FLAGS macros, but
*not* to the V1_VALID_FLAGS macros. In this way, new features may be
exposed over the v2 ioctls, but without breaking previous userspace
which happened to not clear the flags value properly. The old ioctl will
continue to behave the same way, while the new ioctl gains the benefit
of using the flags fields.
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Christopher Hall <christopher.s.hall@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix help text typos for DIMLIB.
Fixes: 4f75da3666 ("linux/dim: Move implementation to .c files")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Tal Gilboa <talgi@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The regmap stride is set to 1 for regmap describing 8bit registers already.
However, for 16/32/64bit registers, the stride is 2/4/8 respectively. This
is not correct, as the switch protocol supports unaligned register reads
and writes and the KSZ87xx even uses such unaligned register accesses to
read e.g. MIB counter.
This patch fixes MIB counter access on KSZ87xx.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Fixes: 46558d601c ("net: dsa: microchip: Initial SPI regmap support")
Fixes: 255b59ad0d ("net: dsa: microchip: Factor out regmap config generation into common header")
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAl2NtDQACgkQ+iyteGJfRsoHgQCdGLeQMm4IR3jsDdFQk/eTIGfR
eNIAoN8AY1UTFvWJTxEOhucdAzEAVnHs
=TdeQ
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-5.4-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- addition of AST2600, i.MX7ULP and F81803 watchdog support
- removal of the w90x900 and ks8695 drivers
- ziirave_wdt improvements
- small fixes and improvements
* tag 'linux-watchdog-5.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (51 commits)
watchdog: f71808e_wdt: Add F81803 support
watchdog: qcom: remove unnecessary variable from private storage
watchdog: qcom: support pre-timeout when the bark irq is available
watchdog: imx_sc: this patch just fixes whitespaces
watchdog: apseed: Add access_cs0 option for alt-boot
watchdog: aspeed: add support for dual boot
watchdog: orion_wdt: use timer1 as a pretimeout
watchdog: Add i.MX7ULP watchdog support
dt-bindings: watchdog: Add i.MX7ULP bindings
dt-bindings: watchdog: sun4i: Add the watchdog clock
dt-bindings: watchdog: sun4i: Add the watchdog interrupts
dt-bindings: watchdog: Convert Allwinner watchdog to a schema
dt-bindings: watchdog: Add YAML schemas for the generic watchdog bindings
watchdog: aspeed: Add support for AST2600
dt-bindings: watchdog: Add ast2600 compatible
watchdog: ziirave_wdt: Update checked I2C functionality mask
watchdog: ziirave_wdt: Drop ziirave_firm_write_block_data()
watchdog: ziirave_wdt: Fix DOWNLOAD_START payload
watchdog: ziirave_wdt: Drop status polling code
watchdog: ziirave_wdt: Fix RESET_PROCESSOR payload
...
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Add NFT_CHAIN_POLICY_UNSET to replace hardcoded -1 to
specify that the chain policy is unset. The chain policy
field is actually defined as an 8-bit unsigned integer.
2) Remove always true condition reported by smatch in
chain policy check.
3) Fix element lookup on dynamic sets, from Florian Westphal.
4) Use __u8 in ebtables uapi header, from Masahiro Yamada.
5) Bogus EBUSY when removing flowtable after chain flush,
from Laura Garcia Liebana.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
core:
- Some cleanups and fixes in the self-refresh helpers
- Some cleanups and fixes in the atomic helpers
amdgpu:
- Fix a 64 bit divide
- Prevent a memory leak in a failure case in dc
- Load proper gfx firmware on navi14 variants
- Add more navi12 and navi14 PCI ids
- Misc fixes for renoir
- Fix bandwidth issues with multiple displays on vega20
- Support for Dali
- Fix a possible oops with KFD on hawaii
- Fix for backlight level after resume on some APUs
- Other misc fixes
panfrost:
- Multiple panfrost fixes for regulator support and page fault handling
-----BEGIN PGP SIGNATURE-----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=yCyF
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Fixes built up over the past 1.5 weeks or so, it's two weeks of
amdgpu, some core cleanups and some panfrost fixes. I also finally
figured out why my desktop was slow to do a bunch of stuff (someone
gave it an IPv6 address which can't reach anything!).
core:
- Some cleanups and fixes in the self-refresh helpers
- Some cleanups and fixes in the atomic helpers
amdgpu:
- Fix a 64 bit divide
- Prevent a memory leak in a failure case in dc
- Load proper gfx firmware on navi14 variants
- Add more navi12 and navi14 PCI ids
- Misc fixes for renoir
- Fix bandwidth issues with multiple displays on vega20
- Support for Dali
- Fix a possible oops with KFD on hawaii
- Fix for backlight level after resume on some APUs
- Other misc fixes
panfrost:
- Multiple panfrost fixes for regulator support and page fault
handling"
* tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm: (34 commits)
drm/amd/display: prevent memory leak
drm/amdgpu/gfx10: add support for wks firmware loading
drm/amdgpu/display: include slab.h in dcn21_resource.c
drm/amdgpu/display: fix 64 bit divide
drm/panfrost: Prevent race when handling page fault
drm/panfrost: Remove NULL checks for regulator
drm/panfrost: Fix regulator_get_optional() misuse
drm: Measure Self Refresh Entry/Exit times to avoid thrashing
drm: Fix kerneldoc and remove unused struct member in self_refresh helper
drm/atomic: Rename crtc_state->pageflip_flags to async_flip
drm/atomic: Reject FLIP_ASYNC unconditionally
drm/atomic: Take the atomic toys away from X
drm/amdgpu: flag navi12 and 14 as experimental for 5.4
drm/kms: Duct-tape for mode object lifetime checks
drm/amdgpu: add navi12 pci id
drm/amdgpu: add navi14 PCI ID for work station SKU
drm/amdkfd: Swap trap temporary registers in gfx10 trap handler
drm/amd/powerplay: implement sysfs for getting dpm clock
drm/amd/display: Restore backlight brightness after system resume
drm/amd/display: Implement voltage limitation for dali
...
In nfp_flower_spawn_vnic_reprs in the loop if initialization or the
allocations fail memory is leaked. Appropriate releases are added.
Fixes: b945245297 ("nfp: flower: add per repr private data for LAG offload")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In nfp_flower_spawn_phy_reprs, in the for loop over eth_tbl if any of
intermediate allocations or initializations fail memory is leaked.
requiered releases are added.
Fixes: b945245297 ("nfp: flower: add per repr private data for LAG offload")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This a new feature, it is preferred that it defaults to N.
We will probe the feature support from userspace before actually using it.
Fixes: 95a7233c45 ('net: openvswitch: Set OvS recirc_id from tc chain index')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A user reported that vrf create fails when IPv6 is disabled at boot using
'ipv6.disable=1':
https://bugzilla.kernel.org/show_bug.cgi?id=204903
The failure is adding fib rules at create time. Add RTNL_FAMILY_IP6MR to
the check in vrf_fib_rule if ipv6_mod_enabled is disabled.
Fixes: e4a38c0c4b ("ipv6: add vrf table handling code for ipv6 mcast")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=rPCf
-----END PGP SIGNATURE-----
Merge tag 'ntb-5.4' of git://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"A few bugfixes and support for new AMD NTB hardware"
* tag 'ntb-5.4' of git://github.com/jonmason/ntb:
NTB: fix IDT Kconfig typos/spellos
ntb_hw_amd: Add memory window support for new AMD hardware
ntb_hw_amd: Add a new NTB PCI device ID
NTB: ntb_transport: remove redundant assignment to rc
ntb_hw_switchtec: make ntb_mw_set_trans() work when addr == 0
ntb: point to right memory window index
To address a major procedural concern on Linus's part the keyrings needs
a co-maintainer.
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2019-09-27
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix libbpf's BTF dumper to not skip anonymous enum definitions, from Andrii.
2) Fix BTF verifier issues when handling the BTF of vmlinux, from Alexei.
3) Fix nested calls into bpf_event_output() from TCP sockops BPF
programs, from Allan.
4) Fix NULL pointer dereference in AF_XDP's xsk map creation when
allocation fails, from Jonathan.
5) Remove unneeded 64 byte alignment requirement of the AF_XDP UMEM
headroom, from Bjorn.
6) Remove unused XDP_OPTIONS getsockopt() call which results in an error
on older kernels, from Toke.
7) Fix a client/server race in tcp_rtt BPF kselftest case, from Stanislav.
8) Fix indentation issue in BTF's btf_enum_check_kflag_member(), from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
[BUG]
The following script can cause btrfs qgroup data space leak:
mkfs.btrfs -f $dev
mount $dev -o nospace_cache $mnt
btrfs subv create $mnt/subv
btrfs quota en $mnt
btrfs quota rescan -w $mnt
btrfs qgroup limit 128m $mnt/subv
for (( i = 0; i < 3; i++)); do
# Create 3 64M holes for latter fallocate to fail
truncate -s 192m $mnt/subv/file
xfs_io -c "pwrite 64m 4k" $mnt/subv/file > /dev/null
xfs_io -c "pwrite 128m 4k" $mnt/subv/file > /dev/null
sync
# it's supposed to fail, and each failure will leak at least 64M
# data space
xfs_io -f -c "falloc 0 192m" $mnt/subv/file &> /dev/null
rm $mnt/subv/file
sync
done
# Shouldn't fail after we removed the file
xfs_io -f -c "falloc 0 64m" $mnt/subv/file
[CAUSE]
Btrfs qgroup data reserve code allow multiple reservations to happen on
a single extent_changeset:
E.g:
btrfs_qgroup_reserve_data(inode, &data_reserved, 0, SZ_1M);
btrfs_qgroup_reserve_data(inode, &data_reserved, SZ_1M, SZ_2M);
btrfs_qgroup_reserve_data(inode, &data_reserved, 0, SZ_4M);
Btrfs qgroup code has its internal tracking to make sure we don't
double-reserve in above example.
The only pattern utilizing this feature is in the main while loop of
btrfs_fallocate() function.
However btrfs_qgroup_reserve_data()'s error handling has a bug in that
on error it clears all ranges in the io_tree with EXTENT_QGROUP_RESERVED
flag but doesn't free previously reserved bytes.
This bug has a two fold effect:
- Clearing EXTENT_QGROUP_RESERVED ranges
This is the correct behavior, but it prevents
btrfs_qgroup_check_reserved_leak() to catch the leakage as the
detector is purely EXTENT_QGROUP_RESERVED flag based.
- Leak the previously reserved data bytes.
The bug manifests when N calls to btrfs_qgroup_reserve_data are made and
the last one fails, leaking space reserved in the previous ones.
[FIX]
Also free previously reserved data bytes when btrfs_qgroup_reserve_data
fails.
Fixes: 5247255370 ("btrfs: qgroup: Introduce btrfs_qgroup_reserve_data function")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Under the following case with qgroup enabled, if some error happened
after we have reserved delalloc space, then in error handling path, we
could cause qgroup data space leakage:
From btrfs_truncate_block() in inode.c:
ret = btrfs_delalloc_reserve_space(inode, &data_reserved,
block_start, blocksize);
if (ret)
goto out;
again:
page = find_or_create_page(mapping, index, mask);
if (!page) {
btrfs_delalloc_release_space(inode, data_reserved,
block_start, blocksize, true);
btrfs_delalloc_release_extents(BTRFS_I(inode), blocksize, true);
ret = -ENOMEM;
goto out;
}
[CAUSE]
In the above case, btrfs_delalloc_reserve_space() will call
btrfs_qgroup_reserve_data() and mark the io_tree range with
EXTENT_QGROUP_RESERVED flag.
In the error handling path, we have the following call stack:
btrfs_delalloc_release_space()
|- btrfs_free_reserved_data_space()
|- btrsf_qgroup_free_data()
|- __btrfs_qgroup_release_data(reserved=@reserved, free=1)
|- qgroup_free_reserved_data(reserved=@reserved)
|- clear_record_extent_bits();
|- freed += changeset.bytes_changed;
However due to a completion bug, qgroup_free_reserved_data() will clear
EXTENT_QGROUP_RESERVED flag in BTRFS_I(inode)->io_failure_tree, other
than the correct BTRFS_I(inode)->io_tree.
Since io_failure_tree is never marked with that flag,
btrfs_qgroup_free_data() will not free any data reserved space at all,
causing a leakage.
This type of error handling can only be triggered by errors outside of
qgroup code. So EDQUOT error from qgroup can't trigger it.
[FIX]
Fix the wrong target io_tree.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Fixes: bc42bda223 ("btrfs: qgroup: Fix qgroup reserved space underflow by only freeing reserved ranges")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We got a null pointer deference BUG_ON in blk_mq_rq_timed_out()
as following:
[ 108.825472] BUG: kernel NULL pointer dereference, address: 0000000000000040
[ 108.827059] PGD 0 P4D 0
[ 108.827313] Oops: 0000 [#1] SMP PTI
[ 108.827657] CPU: 6 PID: 198 Comm: kworker/6:1H Not tainted 5.3.0-rc8+ #431
[ 108.829503] Workqueue: kblockd blk_mq_timeout_work
[ 108.829913] RIP: 0010:blk_mq_check_expired+0x258/0x330
[ 108.838191] Call Trace:
[ 108.838406] bt_iter+0x74/0x80
[ 108.838665] blk_mq_queue_tag_busy_iter+0x204/0x450
[ 108.839074] ? __switch_to_asm+0x34/0x70
[ 108.839405] ? blk_mq_stop_hw_queue+0x40/0x40
[ 108.839823] ? blk_mq_stop_hw_queue+0x40/0x40
[ 108.840273] ? syscall_return_via_sysret+0xf/0x7f
[ 108.840732] blk_mq_timeout_work+0x74/0x200
[ 108.841151] process_one_work+0x297/0x680
[ 108.841550] worker_thread+0x29c/0x6f0
[ 108.841926] ? rescuer_thread+0x580/0x580
[ 108.842344] kthread+0x16a/0x1a0
[ 108.842666] ? kthread_flush_work+0x170/0x170
[ 108.843100] ret_from_fork+0x35/0x40
The bug is caused by the race between timeout handle and completion for
flush request.
When timeout handle function blk_mq_rq_timed_out() try to read
'req->q->mq_ops', the 'req' have completed and reinitiated by next
flush request, which would call blk_rq_init() to clear 'req' as 0.
After commit 12f5b93145 ("blk-mq: Remove generation seqeunce"),
normal requests lifetime are protected by refcount. Until 'rq->ref'
drop to zero, the request can really be free. Thus, these requests
cannot been reused before timeout handle finish.
However, flush request has defined .end_io and rq->end_io() is still
called even if 'rq->ref' doesn't drop to zero. After that, the 'flush_rq'
can be reused by the next flush request handle, resulting in null
pointer deference BUG ON.
We fix this problem by covering flush request with 'rq->ref'.
If the refcount is not zero, flush_end_io() return and wait the
last holder recall it. To record the request status, we add a new
entry 'rq_status', which will be used in flush_end_io().
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: stable@vger.kernel.org # v4.18+
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
-------
v2:
- move rq_status from struct request to struct blk_flush_queue
v3:
- remove unnecessary '{}' pair.
v4:
- let spinlock to protect 'fq->rq_status'
v5:
- move rq_status after flush_running_idx member of struct blk_flush_queue
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Vlad Buslov says:
====================
Fix Qdisc destroy issues caused by adding fine-grained locking to filter API
TC filter API unlocking introduced several new fine-grained locks. The
change caused sleeping-while-atomic BUGs in several Qdiscs that call cls
APIs which need to obtain new mutex while holding sch tree spinlock. This
series fixes affected Qdiscs by ensuring that cls API that became sleeping
is only called outside of sch tree lock critical section.
====================
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recent changes that removed rtnl dependency from rules update path of tc
also made tcf_block_put() function sleeping. This function is called from
ops->destroy() of several Qdisc implementations, which in turn is called by
qdisc_put(). Some Qdiscs call qdisc_put() while holding sch tree spinlock,
which results sleeping-while-atomic BUG.
Steps to reproduce for multiq:
tc qdisc add dev ens1f0 root handle 1: multiq
tc qdisc add dev ens1f0 parent 1:10 handle 50: sfq perturb 10
ethtool -L ens1f0 combined 2
tc qdisc change dev ens1f0 root handle 1: multiq
Resulting dmesg:
[ 5539.419344] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909
[ 5539.420945] in_atomic(): 1, irqs_disabled(): 0, pid: 27658, name: tc
[ 5539.422435] INFO: lockdep is turned off.
[ 5539.423904] CPU: 21 PID: 27658 Comm: tc Tainted: G W 5.3.0-rc8+ #721
[ 5539.425400] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 5539.426911] Call Trace:
[ 5539.428380] dump_stack+0x85/0xc0
[ 5539.429823] ___might_sleep.cold+0xac/0xbc
[ 5539.431262] __mutex_lock+0x5b/0x960
[ 5539.432682] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 5539.434103] ? __nla_validate_parse+0x51/0x840
[ 5539.435493] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 5539.436903] tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 5539.438327] tcf_block_put_ext.part.0+0x21/0x50
[ 5539.439752] tcf_block_put+0x50/0x70
[ 5539.441165] sfq_destroy+0x15/0x50 [sch_sfq]
[ 5539.442570] qdisc_destroy+0x5f/0x160
[ 5539.444000] multiq_tune+0x14a/0x420 [sch_multiq]
[ 5539.445421] tc_modify_qdisc+0x324/0x840
[ 5539.446841] rtnetlink_rcv_msg+0x170/0x4b0
[ 5539.448269] ? netlink_deliver_tap+0x95/0x400
[ 5539.449691] ? rtnl_dellink+0x2d0/0x2d0
[ 5539.451116] netlink_rcv_skb+0x49/0x110
[ 5539.452522] netlink_unicast+0x171/0x200
[ 5539.453914] netlink_sendmsg+0x224/0x3f0
[ 5539.455304] sock_sendmsg+0x5e/0x60
[ 5539.456686] ___sys_sendmsg+0x2ae/0x330
[ 5539.458071] ? ___sys_recvmsg+0x159/0x1f0
[ 5539.459461] ? do_wp_page+0x9c/0x790
[ 5539.460846] ? __handle_mm_fault+0xcd3/0x19e0
[ 5539.462263] __sys_sendmsg+0x59/0xa0
[ 5539.463661] do_syscall_64+0x5c/0xb0
[ 5539.465044] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 5539.466454] RIP: 0033:0x7f1fe08177b8
[ 5539.467863] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 5
4
[ 5539.470906] RSP: 002b:00007ffe812de5d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 5539.472483] RAX: ffffffffffffffda RBX: 000000005d8135e3 RCX: 00007f1fe08177b8
[ 5539.474069] RDX: 0000000000000000 RSI: 00007ffe812de640 RDI: 0000000000000003
[ 5539.475655] RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000182e9b0
[ 5539.477203] R10: 0000000000404eda R11: 0000000000000246 R12: 0000000000000001
[ 5539.478699] R13: 000000000047f640 R14: 0000000000000000 R15: 0000000000000000
Rearrange locking in multiq_tune() in following ways:
- In loop that removes Qdiscs from disabled queues, call
qdisc_purge_queue() instead of qdisc_tree_flush_backlog() on Qdisc that
is being destroyed. Save the Qdisc in temporary allocated array and call
qdisc_put() on each element of the array after sch tree lock is released.
This is safe to do because Qdiscs have already been reset by
qdisc_purge_queue() inside sch tree lock critical section.
- Do the same change for second loop that initializes Qdiscs for newly
enabled queues in multiq_tune() function. Since sch tree lock is obtained
and released on each iteration of this loop, just call qdisc_put()
directly outside of critical section. Don't verify that old Qdisc is not
noop_qdisc before releasing reference to it because such check is already
performed by qdisc_put*() functions.
Fixes: c266f64dbf ("net: sched: protect block state with mutex")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rds_bind(), laddr_check is called without checking if it is NULL or
not. And rs_transport should be reset if rds_add_bound() fails.
Fixes: c5c1a030a7 ("net/rds: An rds_sock is added too early to the hash table")
Reported-by: syzbot+fae39afd2101a17ec624@syzkaller.appspotmail.com
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
tcp: provide correct skb->priority
SO_PRIORITY socket option requests TCP egress packets
to contain a user provided value.
TCP manages to send most packets with the requested values,
notably for TCP_ESTABLISHED state, but fails to do so for
few packets.
These packets are control packets sent on behalf
of SYN_RECV or TIME_WAIT states.
Note that to test this with packetdrill, it is a bit
of a hassle, since packetdrill can not verify priority
of egress packets, other than indirect observations,
using for example sch_prio on its tunnel device.
The bad skb priorities cause problems for GCP,
as this field is one of the keys used in routing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ctl packets sent on behalf of TIME_WAIT sockets currently
have a zero skb->priority, which can cause various problems.
In this patch we :
- add a tw_priority field in struct inet_timewait_sock.
- populate it from sk->sk_priority when a TIME_WAIT is created.
- For IPv4, change ip_send_unicast_reply() and its two
callers to propagate tw_priority correctly.
ip_send_unicast_reply() no longer changes sk->sk_priority.
- For IPv6, make sure TIME_WAIT sockets pass their tw_priority
field to tcp_v6_send_response() and tcp_v6_send_ack().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can populate skb->priority for some ctl packets
instead of always using zero.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, ip6_xmit() sets skb->priority based on sk->sk_priority
This is not desirable for TCP since TCP shares the same ctl socket
for a given netns. We want to be able to send RST or ACK packets
with a non zero skb->priority.
This patch has no functional change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CPU port does not have a PHY connected to it. So calling
phy_support_asym_pause() results in an Opps. As with other DSA
drivers, add a guard that the port is a user port.
Reported-by: Michal Vokáč <michal.vokac@ysoft.com>
Fixes: 0394a63acf ("net: dsa: enable and disable all ports")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "gmac->phy_mode" variable is an enum and in this context GCC will
treat it as an unsigned int so the error handling will never be
triggered.
Fixes: b1c17215d7 ("stmmac: add ipq806x glue layer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "priv->phy_mode" is an enum and in this context GCC will treat it
as an unsigned int so it can never be less than zero.
Fixes: 492caffa8a ("net: ethernet: nixge: Add support for National Instruments XGE netdev")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "iface" variable is an enum and in this context GCC treats it as
an unsigned int so the error handling is never triggered.
Fixes: b786241253 ("of_mdio: Abstract a general interface for phy connect")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "lp->phy_mode" is an enum but in this context GCC treats it as an
unsigned int so the error handling is never triggered.
Fixes: ee06b1728b ("net: axienet: add support for standard phy-mode binding")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "dwmac->phy_mode" is an enum and in this context GCC treats it as
an unsigned int so the error handling is never triggered.
Fixes: 566e825162 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "phy_mode" variable is an enum and in this context GCC treats it as
an unsigned int so the error handling is never triggered.
Fixes: 4c270b55a5 ("net: ethernet: socionext: add AVE ethernet driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In komeda_wb_connector_add if drm_writeback_connector_init fails the
allocated memory for kwb_conn should be released.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925043031.32308-1-navid.emamdoost@gmail.com
The "priv->if_mode" is type phy_interface_t which is an enum. In this
context GCC will treat the enum as an unsigned int so this error
handling is never triggered.
Fixes: d4fd0404c1 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "priv->phy_interface" variable is an enum and in this context GCC
will treat it as an unsigned int so the error handling is never
triggered.
Fixes: 533dd11a12 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "priv->phy_interface" variable is an enum and in this context GCC
will treat it as unsigned so the error handling will never be
triggered.
Fixes: 80105befdb ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "priv->phy_mode" variable is an enum and in this context GCC will
treat it as unsigned to the error handling will never trigger.
Fixes: 57c5bc9ad7 ("net: hisilicon: add hix5hd2 mac driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "chip" variable is an enum, and it's treated as unsigned int by GCC
in this context so the error handling isn't triggered.
Fixes: e8d452923a ("cxgb4: clean up init_one")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
