Commit Graph

288 Commits

Author SHA1 Message Date
Stephen Rothwell
661f1cdb8b [POWERPC] remove unused asm routines
_insw, _outsw, _insl amd _outsl are all unused, so remove them.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-20 14:06:18 +10:00
Stephen Rothwell
fa053d2f00 [POWERPC] remove unused io accessors
The io accessors insw_ns, outsw_ns, insl_ns and outsl_ns are unused
(except for one unnecessary use in drivers/net/3c509.c that is addressed
in a previous patch) and are only defined in powerpc/ppc, so remove them.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-20 14:06:17 +10:00
Paul Mackerras
f007cacffc [POWERPC] Fix MMIO ops to provide expected barrier behaviour
This changes the writeX family of functions to have a sync instruction
before the MMIO store rather than after, because the generally expected
behaviour is that the device receiving the MMIO store can be guaranteed
to see the effects of any preceding writes to normal memory.

To preserve ordering between writeX and readX, and to preserve ordering
between preceding stores and the readX, the readX family of functions
have had an sync added before the load.

Although writeX followed by spin_unlock is not officially guaranteed
to keep the writeX inside the spin-locked region unless an mmiowb()
is used, there are currently drivers that depend on the previous
behaviour on powerpc, which was that the mmiowb wasn't actually required.
Therefore we have a per-cpu flag that is set by writeX, cleared by
__raw_spin_lock and mmiowb, and tested by __raw_spin_unlock.  If it is
set, __raw_spin_unlock does a sync and clears it.

This changes both 32-bit and 64-bit readX/writeX.  32-bit already has a
sync in __raw_spin_unlock (since lwsync doesn't exist on 32-bit), and thus
doesn't need the per-cpu flag.

Tested on G5 (PPC970) and POWER5.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-13 22:08:26 +10:00
Vitaly Bordug
2ca2d5e84c [PATCH] ppc32: board-specific part of fs_enet update
This contains board-specific portion to respect driver changes (for 8272ads ,
885ads and 866ads).  Altered platform_data structures as well as initial setup
routines relevant to fs_enet.

Changes to the mpc8560ads ppc/ code are also introduced, but mainly as
reference, since the entire board support is going to appear in arch/powerpc.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:31 -04:00
Steven Rostedt
52393ccc0a [PATCH] remove set_wmb - arch removal
set_wmb should not be used in the kernel because it just confuses the
code more and has no benefit.  Since it is not currently used in the
kernel this patch removes it so that new code does not include it.

All archs define set_wmb(var, value) to do { var = value; wmb(); }
while(0) except ia64 and sparc which use a mb() instead.  But this is
still moot since it is not used anyway.

Hasn't been tested on any archs but x86 and x86_64 (and only compiled
tested)

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14 21:56:14 -07:00
Thomas Gleixner
bc59d2800d [PATCH] irq-flags: PPC: Use the new IRQF_ constants
Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:48 -07:00
Adrian Bunk
b3c2ffd534 typo fixes: mecanism -> mechanism
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 18:20:44 +02:00
Linus Torvalds
602cada851 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6: (22 commits)
  [PATCH] devfs: Remove it from the feature_removal.txt file
  [PATCH] devfs: Last little devfs cleanups throughout the kernel tree.
  [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV
  [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the line_driver devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the videodevice devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree
  [PATCH] devfs: Remove devfs_remove() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_cdev() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_symlink() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree
  [PATCH] devfs: Remove devfs_*_tape() functions from the kernel tree
  [PATCH] devfs: Remove devfs support from the sound subsystem
  [PATCH] devfs: Remove devfs support from the ide subsystem.
  [PATCH] devfs: Remove devfs support from the serial subsystem
  [PATCH] devfs: Remove devfs from the init code
  [PATCH] devfs: Remove devfs from the partition code
  ...
2006-06-29 14:19:21 -07:00
Greg Kroah-Hartman
e31dd6e452 [PATCH] 64bit resource: change pci core and arch code to use resource_size_t
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com>

Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27 09:24:00 -07:00
Greg Kroah-Hartman
ff23eca3e8 [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree
Also fixes up all files that #include it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:08 -07:00
Matt Mackall
afedfd016a [PATCH] random: remove SA_SAMPLE_RANDOM from floppy driver
The floppy driver is already calling add_disk_randomness as it should, so this
was redundant.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:00 -07:00
Linus Torvalds
45c091bb2d Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits)
  [POWERPC] re-enable OProfile for iSeries, using timer interrupt
  [POWERPC] support ibm,extended-*-frequency properties
  [POWERPC] Extra sanity check in EEH code
  [POWERPC] Dont look for class-code in pci children
  [POWERPC] Fix mdelay badness on shared processor partitions
  [POWERPC] disable floating point exceptions for init
  [POWERPC] Unify ppc syscall tables
  [POWERPC] mpic: add support for serial mode interrupts
  [POWERPC] pseries: Print PCI slot location code on failure
  [POWERPC] spufs: one more fix for 64k pages
  [POWERPC] spufs: fail spu_create with invalid flags
  [POWERPC] spufs: clear class2 interrupt status before wakeup
  [POWERPC] spufs: fix Makefile for "make clean"
  [POWERPC] spufs: remove stop_code from struct spu
  [POWERPC] spufs: fix spu irq affinity setting
  [POWERPC] spufs: further abstract priv1 register access
  [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts
  [POWERPC] spufs: dont try to access SPE channel 1 count
  [POWERPC] spufs: use kzalloc in create_spu
  [POWERPC] spufs: fix initial state of wbox file
  ...

Manually resolved conflicts in:
	drivers/net/phy/Makefile
	include/asm-powerpc/spu.h
2006-06-22 22:11:30 -07:00
Anton Blanchard
227318bbde [POWERPC] Remove stale 64bit on 32bit kernel code
Remove some stale POWER3/POWER4/970 on 32bit kernel support.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 19:31:26 +10:00
Paul Mackerras
6218a761bb powerpc: add context.vdso_base for 32-bit too
This adds a vdso_base element to the mm_context_t for 32-bit compiles
(both for ARCH=powerpc and ARCH=ppc).  This fixes the compile errors
that have been reported in arch/powerpc/kernel/signal_32.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-11 14:15:17 +10:00
David Woodhouse
66643de455 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	include/asm-powerpc/unistd.h
	include/asm-sparc/unistd.h
	include/asm-sparc64/unistd.h

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-24 09:22:21 +01:00
Paul Mackerras
3c06da5ae5 Merge ../linux-2.6 2006-05-19 15:02:42 +10:00
Paul Mackerras
e4de00215c powerpc/32: Define an is_kernel_addr() to fix ARCH=ppc compilation
My commit 6bfd93c32a broke the ARCH=ppc
compilation by using the is_kernel_addr() macro in asm/uaccess.h.
This fixes it by defining a suitable is_kernel_addr() for ARCH=ppc.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-09 16:00:59 +10:00
David Woodhouse
5047f09b56 Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-06 19:59:18 +01:00
Paul Mackerras
f18fc729cd Merge ../linux-2.6 2006-05-05 15:45:48 +10:00
Vitaly Bordug
61f5657c50 [PATCH] ppc32 CPM_UART: Fixed break send on SCC
SCC uart sends a break sequence each time it is stopped with the
CPM_CR_STOP_TX command. That means that each time an application closes the
serial device, a break is transmitted. To fix this, graceful tx stop is
issued for SCC.

Signed-off-by: David Jander <david.jander@protonic.nl>
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-03 23:06:43 +10:00
David Woodhouse
b07019f293 Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-30 20:34:39 +01:00
Paul Mackerras
29f147d746 Merge branch 'merge' 2006-04-29 16:15:57 +10:00
Vitaly Bordug
a73c87bfe9 [PATCH] ppc32: odd fixes and improvements in ppc_sys
This consists of offsets fix in ..._devices.c, and update of
ppc_sys_fixup_mem_resource() function to prevent subsequent fixups

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-28 21:05:16 +10:00
Eugene Surovegin
30aacebed0 [PATCH] ppc32: add 440GX erratum 440_43 workaround
This patch adds workaround for PPC 440GX erratum 440_43. According to
this erratum spurious MachineChecks (caused by L1 cache parity) can
happen during DataTLB miss processing. We disable L1 cache parity
checking for 440GX rev.C and rev.F

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-28 21:04:56 +10:00
David Woodhouse
62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
Andy Fleming
591f0a4287 Add 85xx CDS to arch/powerpc
This patch adds support for 85xx CDS support to arch/powerpc

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-04-04 16:09:18 -05:00
Eugene Surovegin
bab70a4af7 [PATCH] lock PTE before updating it in 440/BookE page fault handler
Fix 44x and BookE page fault handler to correctly lock PTE before
trying to pte_update() it, otherwise this PTE might be swapped out
after pte_present() check but before pte_uptdate() call, resulting in
corrupted PTE. This can happen with enabled preemption and low memory
condition.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-29 13:44:15 +11:00
Paul Mackerras
bac30d1a78 Merge ../linux-2.6 2006-03-29 13:24:50 +11:00
Benjamin Herrenschmidt
e8222502ee [PATCH] powerpc: Kill _machine and hard-coded platform numbers
This removes statically assigned platform numbers and reworks the
powerpc platform probe code to use a better mechanism.  With this,
board support files can simply declare a new machine type with a
macro, and implement a probe() function that uses the flattened
device-tree to detect if they apply for a given machine.

We now have a machine_is() macro that replaces the comparisons of
_machine with the various PLATFORM_* constants.  This commit also
changes various drivers to use the new macro instead of looking at
_machine.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-28 23:15:54 +11:00
Paul Mackerras
0a26b1364f ppc: Remove CHRP, POWER3 and POWER4 support from arch/ppc
32-bit CHRP machines are now supported only in arch/powerpc, as are
all 64-bit PowerPC processors.  This means that we don't use
Open Firmware on any platform in arch/ppc any more.

This makes PReP support a single-platform option like every other
platform support option in arch/ppc now, thus CONFIG_PPC_MULTIPLATFORM
is gone from arch/ppc.  CONFIG_PPC_PREP is the option that selects
PReP support and is generally what has replaced
CONFIG_PPC_MULTIPLATFORM within arch/ppc.

_machine is all but dead now, being #defined to 0.

Updated Makefiles, comments and Kconfig options generally to reflect
these changes.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-28 10:22:10 +11:00
KAMEZAWA Hiroyuki
f68d4c996d [PATCH] unify pfn_to_page: ppc pfn_to_page
PPC can use generic funcs.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:46 -08:00
Paul Mackerras
a0652fc9a2 powerpc: Unify the 32 and 64 bit idle loops
This unifies the 32-bit (ARCH=ppc and ARCH=powerpc) and 64-bit idle
loops.  It brings over the concept of having a ppc_md.power_save
function from 32-bit to ARCH=powerpc, which lets us get rid of
native_idle().  With this we will also be able to simplify the idle
handling for pSeries and cell.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 15:03:03 +11:00
Sylvain Munaut
1f5e3b028c [PATCH] ppc32: Reorganize and complete MPC52xx initial cpu setup
ppc32: Reorganize and complete MPC52xx initial cpu setup

This patch splits up the CPU setup into a generic part and a
platform specific part. We also add a few missing init at the
same time.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 14:49:00 +11:00
Paul Mackerras
c6622f63db powerpc: Implement accurate task and CPU time accounting
This implements accurate task and cpu time accounting for 64-bit
powerpc kernels.  Instead of accounting a whole jiffy of time to a
task on a timer interrupt because that task happened to be running at
the time, we now account time in units of timebase ticks according to
the actual time spent by the task in user mode and kernel mode.  We
also count the time spent processing hardware and software interrupts
accurately.  This is conditional on CONFIG_VIRT_CPU_ACCOUNTING.  If
that is not set, we do tick-based approximate accounting as before.

To get this accurate information, we read either the PURR (processor
utilization of resources register) on POWER5 machines, or the timebase
on other machines on

* each entry to the kernel from usermode
* each exit to usermode
* transitions between process context, hard irq context and soft irq
  context in kernel mode
* context switches.

On POWER5 systems with shared-processor logical partitioning we also
read both the PURR and the timebase at each timer interrupt and
context switch in order to determine how much time has been taken by
the hypervisor to run other partitions ("steal" time).  Unfortunately,
since we need values of the PURR on both threads at the same time to
accurately calculate the steal time, and since we can only calculate
steal time on a per-core basis, the apportioning of the steal time
between idle time (time which we ceded to the hypervisor in the idle
loop) and actual stolen time is somewhat approximate at the moment.

This is all based quite heavily on what s390 does, and it uses the
generic interfaces that were added by the s390 developers,
i.e. account_system_time(), account_user_time(), etc.

This patch doesn't add any new interfaces between the kernel and
userspace, and doesn't change the units in which time is reported to
userspace by things such as /proc/stat, /proc/<pid>/stat, getrusage(),
times(), etc.  Internally the various task and cpu times are stored in
timebase units, but they are converted to USER_HZ units (1/100th of a
second) when reported to userspace.  Some precision is therefore lost
but there should not be any accumulating error, since the internal
accumulation is at full precision.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24 14:05:56 +11:00
Paul Mackerras
a00428f5b1 Merge ../powerpc-merge 2006-02-24 14:05:47 +11:00
Olaf Hering
0728a2f99e [PATCH] powerpc: remove duplicate exports
A few symbols are exported twice, remove them from ppc_ksyms.c
Remove users of sys_ctrler in arch/ppc/

WARNING: vmlinux: duplicate symbol '__delay' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__up' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down_interruptible' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'sys_ctrler' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncat' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncmp' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strrchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strnlen' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strpbrk' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'memscan' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strstr' previous definition was in vmlinux

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-20 10:44:31 +11:00
Jon Mason
2ef9481e66 [PATCH] powerpc: trivial: modify comments to refer to new location of files
This patch removes all self references and fixes references to files
in the now defunct arch/ppc64 tree.  I think this accomplises
everything wanted, though there might be a few references I missed.

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10 16:53:51 +11:00
Vitaly Bordug
75288c78c6 [PATCH] ppc32: Make platform devices being able to assign functions
Implemented by  modification of the .name field of the platform device,
when PDs with the
same names are to be used within different drivers, as
<device_name> -> <device_name>:<function>
Corresponding drivers should change the .name in struct device_driver to
reflect upper of course.

Added ppc_sys_device_disable/enable function set, making it easier to
disable all the inexistent/not utilized platform device way pdevs. By the
check of the "disabled" bit in the config field of ppc_sys_specs, disabled
platform devices will be either added/removed from the bus, or simply not
registered on it, depending on the time when disable/enable call asserted.

The default behaviour when nothing is disabled/enabled will be "all devices
are enabled", which is the same as before.

Also helper platform_notify_map function added, making assignment of
board-specific platform_info more consistent and generic.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10 16:52:46 +11:00
Paul Mackerras
8f75015f33 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc 2006-02-08 09:43:08 +11:00
Grant C. Likely
909aeca664 [PATCH] powerpc: Add support for Xilinx ML403 reference design
Includes fix for Xilinx silicon errata 213

Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 22:36:01 +11:00
Grant C. Likely
1a42e53d17 [PATCH] powerpc: Migrate Xilinx Vertex support from the OCP bus to the platfom bus.
This patch only deals with the serial port definitions as there is no
support for any other xilinx IP cores in the kernel tree at the moment.

Board specific configuration moved out of virtex.[ch] and into the
xparameters.h wrapper.

This also prepares for the transition to the flattened device tree model.
When the bootloader provides a device tree generated from an xparameters.h
files, the kernel will no longer need xparameters/*.  The platform bus will
get populated with data from the device tree, and the device drivers will
be automatically connected to the devices.  Only the bootloader (or
ppcboot) will need xparameters directly.

Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 22:35:58 +11:00
Grant C. Likely
b4367e7451 [PATCH] powerpc: Move xparameters.h into xilinx virtex device specific path
xparameters should not be needed by anything but virtex platform code.
Move it from include/asm-ppc/ to platforms/4xx/xparameters/

This is preparing for work to remove xparameters from the dependancy tree
for most c files.  xparam changes should not cause a recompile of the world.
Instead, drivers should get device info from the platform bus (populated
by the boot code)

Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 22:35:35 +11:00
Marcelo Tosatti
0ec57e53c9 [PATCH] powerpc: generalize PPC44x_PIN_SIZE
The following patch generalizes PPC44x_PIN_SIZE by changing it to
PPC_PIN_SIZE, which can be defined by any sub-arch to automatically adjust
VMALLOC_START.

Define PPC_PIN_SIZE on 8xx, avoiding potential conflicts with the
pinned space.

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-20 16:13:50 +11:00
Vitaly Bordug
0ce928e1b2 [PATCH] ppc32 8xx: Added setbitsXX/clrbitsXX macro for read-modify-write operations
This adds setbitsXX/clrbitsXX macro for read-modify-write operations
and converts the 8xx core and drivers to use them.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-20 16:13:29 +11:00
Paul Mackerras
a7fdd90bc4 [PATCH] ppc: Remove powermac support from ARCH=ppc
This makes it possible to build kernels for PReP and/or CHRP
with ARCH=ppc by removing the (non-building) powermac support.
It's now also possible to select PReP and CHRP independently.
Powermac users should now build with ARCH=powerpc instead of
ARCH=ppc.  (This does mean that it is no longer possible to
build a 32-bit kernel for a G5.)

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 17:30:44 +11:00
Linus Torvalds
45bfe98bd7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge
Fix up delete/modify conflict of arch/ppc/kernel/process.c by hand (it's
gone, gone, gone).

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 10:21:22 -08:00
Ingo Molnar
4dc7a0bbeb [PATCH] sched: add cacheflush() asm
Add per-arch sched_cacheflush() which is a write-back cacheflush used by
the migration-cost calibration code at bootup time.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:49 -08:00
Paul Mackerras
624cee31bc powerpc: make ARCH=ppc use arch/powerpc/kernel/process.c
Commit 5388fb1025 made signal_32.c
use discard_lazy_cpu_state, which broke ARCH=ppc because that
uses the common signal_32.c but has its own process.c.  Make ARCH=ppc
use the common process.c to fix this and to reduce the amount
of duplicated code.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12 21:22:34 +11:00
Benjamin Herrenschmidt
f2c4583a38 [PATCH] powerpc: pci_address_to_pio fix
This fixes pci_address_to_pio() to return an unsigned long (to be safe)
and fixes a bug in the implementation that caused it to return a bogus
IO port number

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:05:56 +11:00
Kumar Gala
a819f8ba76 [PATCH] ppc32: Add TQM85xx (8540/8541/8555/8560) board support
This patch adds support for the TQ Components TQM85xx modules. Currently the
modules TQM8540/8541/8555/8560 are supported.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:53:08 +11:00