Commit Graph

2 Commits

Author SHA1 Message Date
Sergio Paracuellos
c16edf5ff8 clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates
'clk_init_data' for gates is setting up 'CLK_IS_CRITICAL'
flag for all of them. This was being doing because some
drivers of this SoC might not be ready to use the clock
and we don't wanted the kernel to disable them since default
behaviour without clock driver was to set all gate bits to
enabled state. After a bit more testing and checking driver
code it is safe to remove this flag and just let the kernel
to disable those gates that are not in use. No regressions
seems to appear.

Fixes: 48df7a26f4 ("clk: ralink: add clock driver for mt7621 SoC")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210727055537.11785-1-sergio.paracuellos@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-28 22:24:06 -07:00
Sergio Paracuellos
48df7a26f4 clk: ralink: add clock driver for mt7621 SoC
The documentation for this SOC only talks about two
registers regarding to the clocks:
* SYSC_REG_CPLL_CLKCFG0 - provides some information about
boostrapped refclock. PLL and dividers used for CPU and some
sort of BUS.
* SYSC_REG_CPLL_CLKCFG1 - a banch of gates to enable/disable
clocks for all or some ip cores.

Looking into driver code, and some openWRT patched there are
another frequencies which are used in some drivers (uart, sd...).
According to all of this information the clock plan for this
SoC is set as follows:
- Main top clock "xtal" from where all the rest of the world is
derived.
- CPU clock "cpu" derived from "xtal" frequencies and a bunch of
register reads and predividers.
- BUS clock "bus" derived from "cpu" and with (cpu / 4) MHz.
- Fixed clocks from "xtal":
    * "50m": 50 MHz.
    * "125m": 125 MHz.
    * "150m": 150 MHz.
    * "250m": 250 MHz.
    * "270m": 270 MHz.

We also have a buch of gate clocks with their parents:
  * "hsdma": "150m"
  * "fe": "250m"
  * "sp_divtx": "270m"
  * "timer": "50m"
  * "pcm": "270m"
  * "pio": "50m"
  * "gdma": "bus"
  * "nand": "125m"
  * "i2c": "50m"
  * "i2s": "270m"
  * "spi": "bus"
  * "uart1": "50m"
  * "uart2": "50m"
  * "uart3": "50m"
  * "eth": "50m"
  * "pcie0": "125m"
  * "pcie1": "125m"
  * "pcie2": "125m"
  * "crypto": "250m"
  * "shxc": "50m"

With this information the clk driver will provide clock and gates
functionality from a a set of hardcoded clocks allowing to define
a nice device tree without fixed clocks.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210410055059.13518-2-sergio.paracuellos@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-12 19:10:54 -07:00