commit be9d73e649 ("platform/x86: hp-wmi: Fix 0x05 error code reported by
several WMI calls") and commit 12b19f14a2 ("platform/x86: hp-wmi: Fix
hp_wmi_read_int() reporting error (0x05)") cause ACPI BIOS Error (bug):
Attempt to CreateField of length zero (20211217/dsopcode-133) because of
the ACPI method HWMC, which unconditionally creates a Field of
size (insize*8) bits:
CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN)
In cases where args->insize = 0, the Field size is 0, resulting in
an error.
Fix this by using zero insize only if 0x5 error code is returned
Tested on Omen 15 AMD (2020) board ID: 8786.
Fixes: be9d73e649 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls")
Signed-off-by: Bedant Patnaik <bedant.patnaik@gmail.com>
Tested-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/41be46743d21c78741232a47bbb5f1cdbcc3d21e.camel@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
WMI queries fail on some devices where the ACPI method HWMC
unconditionally attempts to create Fields beyond the buffer
if the buffer is too small, this breaks essential features
such as power profiles:
CreateByteField (Arg1, 0x10, D008)
CreateByteField (Arg1, 0x11, D009)
CreateByteField (Arg1, 0x12, D010)
CreateDWordField (Arg1, 0x10, D032)
CreateField (Arg1, 0x80, 0x0400, D128)
In cases where args->data had zero length, ACPI BIOS Error
(bug): AE_AML_BUFFER_LIMIT, Field [D008] at bit
offset/length 128/8 exceeds size of target Buffer (128 bits)
(20211217/dsopcode-198) was obtained.
ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D009] at bit
offset/length 136/8 exceeds size of target Buffer (136bits)
(20211217/dsopcode-198)
The original code created a buffer size of 128 bytes regardless if
the WMI call required a smaller buffer or not. This particular
behavior occurs in older BIOS and reproduced in OMEN laptops. Newer
BIOS handles buffer sizes properly and meets the latest specification
requirements. This is the reason why testing with a dynamically
allocated buffer did not uncover any failures with the test systems at
hand.
This patch was tested on several OMEN, Elite, and Zbooks. It was
confirmed the patch resolves HPWMI_FAN GET/SET calls in an OMEN
Laptop 15-ek0xxx. No problems were reported when testing on several Elite
and Zbooks notebooks.
Fixes: 4b4967cbd2 ("platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated")
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220608212923.8585-2-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
As platform_driver_register() could fail, it should be better
to deal with the return value in order to maintain the code
consisitency.
Fixes: 86af1d02d4 ("platform/x86: Support for EC-connected GPIOs for identify LED/button on Barco P50 board")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Link: https://lore.kernel.org/r/20220526090345.1444172-1-jiasheng@iscas.ac.cn
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add Raptorlake P to the list of the platforms that intel_pmc_core driver
supports for pmc_core device. Raptorlake P PCH is based on Alderlake P
PCH.
Signed-off-by: George D Sworo <george.d.sworo@intel.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220602012617.20100-1-george.d.sworo@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The probe function pmt_crashlog_probe() may incorrectly reference
the 'priv->entry array' as it uses 'i' to reference the array instead
of 'priv->num_entries' as it should. This is similar to the problem
that was addressed in pmt_telemetry_probe via commit 2cdfa0c20d
("platform/x86/intel: Fix 'rmmod pmt_telemetry' panic").
Cc: "David E. Box" <david.e.box@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David Arcari <darcari@redhat.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220526203140.339120-1-darcari@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix problem of missing static in struct declaration.
Fixes: 662f24826f ("platform/mellanox: Add support for new SN2201 system")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20220602145103.11859-1-michaelsh@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hTzI
-----END PGP SIGNATURE-----
Merge tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (38 commits)
MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC
MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA
MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem()
MIPS: Kconfig: Fix indentation and add endif comment
MIPS: bmips: Fix compiler warning observed on W=1 build
MIPS: Rewrite `csum_tcpudp_nofold' in plain C
mips: setup: use strscpy to replace strlcpy
MIPS: Octeon: add SNIC10E board
MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo.
MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.
MIPS: Ingenic: Add PWM nodes for X1830.
MIPS: Octeon: fix typo in comment
MIPS: loongson32: Kconfig: Remove extra space
MIPS: Sibyte: remove unnecessary return variable
MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation
selftests/ftrace: Save kprobe_events to test log
MIPS: tools: no need to initialise statics to 0
MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon
MIPS: VR41xx: Drop redundant spinlock initialization
MIPS: smp: optimization for flush_tlb_mm when exiting
...
The driver is using functions from a compilation unit which is enabled
by CONFIG_CPU_SUP_INTEL. Add that dependency to Kconfig explicitly
otherwise:
drivers/platform/x86/intel/ifs/load.o: in function `ifs_load_firmware':
load.c:(.text+0x3b8): undefined reference to `intel_cpu_collect_info'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/YoZay8YR0zRGyVu+@zn.tnic
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Module removal fails because cht_int33fe_typec_remove()
tries to access driver data that does not exist. Fixing by
assigning the data at the end of probe.
Fixes: 915623a80b ("platform/x86: intel_cht_int33fe: Switch to DMI modalias based loading")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220519122103.78546-1-heikki.krogerus@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
intel_hid_dsm_fn_mask is a bit mask containing one bit for each function
index. Fix the function index check in intel_hid_evaluate_method
accordingly, which was missed in commit 97ab451620 ("platform/x86:
intel-hid: fix _DSM function index handling").
Fixes: 97ab451620 ("platform/x86: intel-hid: fix _DSM function index handling")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Niewöhner <linux@mniewoehner.de>
Link: https://lore.kernel.org/r/66f813f5bcc724a0f6dd5adefe6a9728dbe509e3.camel@mniewoehner.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It is overkill to crash the kernel if the `din` buffer is going to full
or overflow.
Drop the BUG_ON() and return -EINVAL instead.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-8-tzungbi@kernel.org
In the context, the following conditions are always false:
- `todo` < 0
Suppose that EC_SPI_FRAME_START is found at the last byte of transfer.
In the case, `ptr` == `end` - 1. As a result, `todo` must be 0.
- `todo` > `ec_dev->din_size`
Suppose that there is no preamble bytes. EC_SPI_FRAME_START is found at
the first byte of transfer.
In the case, `end` == `ptr` + EC_MSG_PREAMBLE_COUNT.
As a result, `todo` == EC_MSG_PREAMBLE_COUNT - 1.
However, it already checked `ec_dev->din_size` < EC_MSG_PREAMBLE_COUNT at
the beginning of function.
Drop the unneeded BUG_ON().
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-7-tzungbi@kernel.org
It is overkill to crash the kernel if the given message is oversize.
Drop the BUG_ON() and return -EINVAL instead.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-6-tzungbi@kernel.org
It is overkill to crash the kernel if the `ec_dev` doesn't support MKBP
event but gets called into cros_ec_get_host_event().
Drop the BUG_ON() and return error (0 in the case) instead.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-5-tzungbi@kernel.org
It is overkill to crash the kernel if the given message is oversize.
Drop the BUG_ON() and return -EINVAL instead.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-4-tzungbi@kernel.org
cros_ec_prepare_tx() returns either:
- >= 0 for number of prepared bytes.
- < 0 for -errno.
Correct the comment and make sure all callers check the return code.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-3-tzungbi@kernel.org
prepare_packet() gets called if `ec_dev->proto_version` > 2. For now, it
must be equivalent to EC_HOST_REQUEST_VERSION.
Drop the BUG_ON().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-2-tzungbi@kernel.org
The x86 Chromebooks have the ChromeOS ACPI device. This driver attaches
to the ChromeOS ACPI device and exports the values reported by ACPI in a
sysfs directory. This data isn't present in ACPI tables when read
through ACPI tools, hence a driver is needed to do it. The driver gets
data from firmware using the ACPI component of the kernel. The ACPI values
are presented in string form (numbers as decimal values) or binary
blobs, and can be accessed as the contents of the appropriate read only
files in the standard ACPI device's sysfs directory tree. This data is
consumed by the ChromeOS user space.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/Yn4OKYrtV35Dv+nd@debian-BULLSEYE-live-builder-AMD64
Calling hwmon_device_register_with_info() with NULL dev and/or chip
information parameters is an ABI abuse and not a real conversion to
the new API. Also, the code creates sysfs attributes _after_ creating
the hwmon device, which is racy and unsupported to start with. On top
of that, the removal code tries to remove the name attribute which is
owned by the hwmon core.
Use hwmon_device_register_with_groups() to register the hwmon device
instead.
In the future, the hwmon subsystem will reject calls to
hwmon_device_register_with_info with NULL dev or chip/info parameters.
Without this patch, the hwmon device will fail to register.
Fixes: f59dc51191 ("MIPS: Loongson: Fix boot warning about hwmon_device_register()")
Cc: Zhi Li <lizhi01@loongson.cn>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add documentation for In-Field Scan (IFS). This documentation
describes the basics of IFS, the loading IFS image, chunk
authentication, running scan and how to check result via sysfs.
The CORE_CAPABILITIES MSR enumerates whether IFS is supported.
The full github location for distributing the IFS images is
still being decided. So just a placeholder included for now
in the documentation.
Future CPUs will support more than one type of test. Plan for
that now by using a "_0" suffix on the ABI directory names.
Additional test types will use "_1", etc.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-13-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add tracing support which may be useful for debugging systems that fail to complete
In Field Scan tests.
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220506225410.1652287-11-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Implement sysfs interface to trigger ifs test for a specific cpu.
Additional interfaces related to checking the status of the
scan test and seeing the version of the loaded IFS binary
are also added.
The basic usage is as below.
- To start test, for example on cpu5:
echo 5 > /sys/devices/platform/intel_ifs/run_test
- To see the status of the last test
cat /sys/devices/platform/intel_ifs/status
- To see the version of the loaded scan binary
cat /sys/devices/platform/intel_ifs/image_version
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-10-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In a core, the scan engine is shared between sibling cpus.
When a Scan test (for a particular core) is triggered by the user,
the scan chunks are executed on all the threads on the core using
stop_core_cpuslocked.
Scan may be aborted by some reasons. Scan test will be aborted in certain
circumstances such as when interrupt occurred or cpu does not have enough
power budget for scan. In this case, the kernel restart scan from the chunk
where it stopped. Scan will also be aborted when the test is failed. In
this case, the test is immediately stopped without retry.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-9-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The IFS image contains hashes that will be used to authenticate the ifs
test chunks. First, use WRMSR to copy the hashes and enumerate the number
of test chunks, chunk size and the maximum number of cores that can run
scan test simultaneously.
Next, use WRMSR to authenticate each and every scan test chunk which is
stored in the IFS image. The CPU will check if the test chunks match
the hashes, otherwise failure is indicated to system software. If the test
chunk is authenticated, it is automatically copied to secured memory.
Use schedule_work_on() to perform the hash copy and authentication. Note
this needs only be done on the first logical cpu of each socket.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-8-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
IFS image is designed specifically for a given family, model and
stepping of the processor. Like Intel microcode header, the IFS image
has the Processor Signature, Checksum and Processor Flags that must be
matched with the information returned by the CPUID.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-7-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Driver probe routine allocates structure to communicate status
and parameters between functions in the driver. Also call
load_ifs_binary() to load the scan image file.
There is a separate scan image file for each processor family,
model, stepping combination. This is read from the static path:
/lib/firmware/intel/ifs/{ff-mm-ss}.scan
Step 1 in loading is to generate the correct path and use
request_firmware_direct() to load into memory.
Subsequent patches will use the IFS MSR interfaces to copy
the image to BIOS reserved memory and validate the SHA256
checksums.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-6-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cloud Service Providers that operate fleets of servers have reported
[1] occasions where they can detect that a CPU has gone bad due to
effects like electromigration, or isolated manufacturing defects.
However, that detection method is A/B testing seemingly random
application failures looking for a pattern. In-Field Scan (IFS) is
a driver for a platform capability to load a crafted 'scan image'
to run targeted low level diagnostics outside of the CPU's architectural
error detection capabilities.
Stub version of driver just does initial part of check for the IFS
feature. MSR_IA32_CORE_CAPS must enumerate the presence of the
MSR_INTEGRITY_CAPS MSR.
[1]: https://www.youtube.com/watch?v=QMF3rqhjYuM
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-5-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This event is triggered by pressing Fn+F12 on
ASUS Zenbook UX425JA
Map it to KEY_PROG1 to allow userspace to
configure it
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Link: https://lore.kernel.org/r/20220506122536.113566-2-luca.stefani.ge1@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The SN2201 is a highly integrated for one rack unit system with
L3 management switches. It has 48 x 1Gbps RJ45 + 4 x 100G QSFP28
ports in a compact 1RU form factor. The system also including a
serial port (RS-232 interface), an OOB port (1G/100M MDI interface)
and USB ports for management functions.
The processor used on SN2201 is Intel Atom®Processor C Series,
C3338R which is one of the Denverton product families.
System equipped with Nvidia®Spectrum-1 32x100GbE Ethernet switch.
Features:
- 48 ports RJ45 support 10/100/1000M speed.
- Support 4 QSFP28 ports with 10/25/40/50/100G.
- A USB port is available on SN2201. This port is used for image and File
Management purposes - backing up and restoring images and config files
- Provides flow control mechanism to ensure zero packet loss.
Uses backpressure for half-duplex operation and IEEE802.3x
for full duplex operation.
- Cut-through and Store-and-Forward free switching mechanism.
By default the mode is cut-through.
- Standard 1U chassis height.
- 19" rack mountable.
- Extensive system LED and per port LEDs.
- Redundant power supply.
- 2 x AC Power Supply (one PSU is default, second PSU is optional).
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220430115809.54565-3-michaelsh@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The EC driver may not be initialized when cros_typec_probe is called,
particulary when CONFIG_CROS_EC_CHARDEV=m.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220404041101.6276-1-akihiko.odaki@gmail.com
Signed-off-by: Prashant Malani <pmalani@chromium.org>
There is only one user of pmc_atom_read in tree, and that is in
drivers/acpi/acpi_lpss.c -- which can't be anything but built-in.
As such there is no point in adding this function to the global symbol
list exported to modules.
Note that there is no <linux/export.h> include removal since the code
was getting that header implicitly.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Aubrey Li <aubrey.li@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: https://lore.kernel.org/r/20220428062430.31010-4-paul.gortmaker@windriver.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This function isn't used anywhere in the driver or anywhere in tree.
So remove it. It can always be re-added if/when a use arises.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Aubrey Li <aubrey.li@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: https://lore.kernel.org/r/20220428062430.31010-2-paul.gortmaker@windriver.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If CONFIG_SUSPEND and CONFIG_DEBUG_FS are not set.
compile error:
drivers/platform/x86/amd-pmc.c:323:12: error: ‘get_metrics_table’ defined but not used [-Werror=unused-function]
static int get_metrics_table(struct amd_pmc_dev *pdev, struct smu_metrics *table)
^~~~~~~~~~~~~~~~~
drivers/platform/x86/amd-pmc.c:298:12: error: ‘amd_pmc_idlemask_read’ defined but not used [-Werror=unused-function]
static int amd_pmc_idlemask_read(struct amd_pmc_dev *pdev, struct device *dev,
^~~~~~~~~~~~~~~~~~~~~
drivers/platform/x86/amd-pmc.c:196:12: error: ‘amd_pmc_get_smu_version’ defined but not used [-Werror=unused-function]
static int amd_pmc_get_smu_version(struct amd_pmc_dev *dev)
^~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
To fix building warning, wrap all related code with CONFIG_SUSPEND or CONFIG_DEBUG_FS.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Link: https://lore.kernel.org/r/20220505121958.138905-1-renzhijie2@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When building the Surface Aggregator Module (SAM) core, registry, and
other SAM client drivers as builtin modules (=y), proper initialization
order is not guaranteed. Due to this, client driver registration
(triggered by device registration in the registry) races against bus
initialization in the core.
If any attempt is made at registering the device driver before the bus
has been initialized (i.e. if bus initialization fails this race) driver
registration will fail with a message similar to:
Driver surface_battery was unable to register with bus_type surface_aggregator because the bus was not initialized
Switch from module_init() to subsys_initcall() to resolve this issue.
Note that the serdev subsystem uses postcore_initcall() so we are still
able to safely register the serdev device driver for the core.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Reported-by: Blaž Hrastnik <blaz@mxxn.io>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220429195738.535751-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The new Surface Pro 8 uses GPEs for lid events as well. Add an entry for
that so that the lid can be used to wake the device. Note that this is a
device with a keyboard type-cover, where this acts as the "lid".
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220429180049.1282447-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There was an issue with the dual fan probe whereby the probe was
failing as it assuming that second_fan support was not available.
Corrected the logic so the probe works correctly. Cleaned up so
quirks only used if 2nd fan not detected.
Tested on X1 Carbon 10 (2 fans), X1 Carbon 9 (2 fans) and T490 (1 fan)
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220502191200.63470-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Lenovo laptops that contain NVME SSDs across a variety of generations have
trouble resuming from suspend to idle when the IOMMU translation layer is
active for the NVME storage device.
This generally manifests as a large resume delay or page faults. These
delays and page faults occur as a result of a Lenovo BIOS specific SMI
that runs during the D3->D0 transition on NVME devices.
This SMI occurs because of a flag that is set during resume by Lenovo
firmware:
```
OperationRegion (PM80, SystemMemory, 0xFED80380, 0x10)
Field (PM80, AnyAcc, NoLock, Preserve)
{
SI3R, 1
}
Method (_ON, 0, NotSerialized) // _ON_: Power On
{
TPST (0x60D0)
If ((DAS3 == 0x00))
{
If (SI3R)
{
TPST (0x60E0)
M020 (NBRI, 0x00, 0x00, 0x04, (NCMD | 0x06))
M020 (NBRI, 0x00, 0x00, 0x10, NBAR)
APMC = HDSI /* \HDSI */
SLPS = 0x01
SI3R = 0x00
TPST (0x60E1)
}
D0NV = 0x01
}
}
```
Create a quirk that will run early in the resume process to prevent this
SMI from running. As any of these machines are fixed, they can be peeled
back from this quirk or narrowed down to individual firmware versions.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1910
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1689
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mark Pearson <markpearson@lenvo.com>
Link: https://lore.kernel.org/r/20220429030501.1909-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
DMI matching in thinkpad_acpi happens local to a function meaning
quirks can only match that function.
Future changes to thinkpad_acpi may need to quirk other code, so
change this to use a quirk infrastructure.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mark Pearson <markpearson@lenvo.com>
Link: https://lore.kernel.org/r/20220429030501.1909-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some ChromeOS EC devices (such as the Framework Laptop) only map I/O
ports 0x800-0x807. Making the larger reservation required by the non-MEC
LPC (the 0xFF ports for the memory map, and the 0xFF ports for the
parameter region) is non-viable on these devices.
Since we probe the MEC EC first, we can get away with a smaller
reservation that covers the MEC EC ports. If we fall back to classic
LPC, we can grow the reservation to cover the memory map and the
parameter region.
cros_ec_lpc_probe also interacted with I/O ports 0x800-0x807 without a
reservation. Restructuring the code to request the MEC LPC region first
obviates the need to do so.
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220217165930.15081-3-dustin@howett.net
The Framework Laptop identifies itself in DMI with manufacturer
"Framework" and product "Laptop".
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220217165930.15081-2-dustin@howett.net
The dcdbas driver is used to call SMI handlers for both, dcdbas and
dell-smbios-smm. Both drivers allocate a buffer for communicating
with the SMI handler. The physical buffer address is then passed to
the called SMI handler via %ebx.
Unfortunately this doesn't work when running in Xen dom0, as the
physical address obtained via virt_to_phys() is only a guest physical
address, and not a machine physical address as needed by SMI.
The problem in dcdbas is easy to correct, as dcdbas is using
dma_alloc_coherent() for allocating the buffer, and the machine
physical address is available via the DMA address returned in the DMA
handle.
In order to avoid duplicating the buffer allocation code in
dell-smbios-smm, add a generic buffer allocation function to dcdbas
and use it for both drivers. This is especially fine regarding driver
dependencies, as dell-smbios-smm is already calling dcdbas to generate
the SMI request.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220318150950.16843-1-jgross@suse.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
