We're using mutex_lock() inside a wait_event() conditional -
prepare_to_wait() has already flipped task state, so potentially
blocking ops need annotation.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The race condition around the ECCCLR register access happens in the IRQ
disable method called in the device remove() procedure and in the ECC IRQ
handler:
1. Enable IRQ:
a. ECCCLR = EN_CE | EN_UE
2. Disable IRQ:
a. ECCCLR = 0
3. IRQ handler:
a. ECCCLR = CLR_CE | CLR_CE_CNT | CLR_CE | CLR_CE_CNT
b. ECCCLR = 0
c. ECCCLR = EN_CE | EN_UE
So if the IRQ disabling procedure is called concurrently with the IRQ
handler method the IRQ might be actually left enabled due to the
statement 3c.
The root cause of the problem is that ECCCLR register (which since
v3.10a has been called as ECCCTL) has intermixed ECC status data clear
flags and the IRQ enable/disable flags. Thus the IRQ disabling (clear EN
flags) and handling (write 1 to clear ECC status data) procedures must
be serialised around the ECCCTL register modification to prevent the
race.
So fix the problem described above by adding the spin-lock around the
ECCCLR modifications and preventing the IRQ-handler from modifying the
IRQs enable flags (there is no point in disabling the IRQ and then
re-enabling it again within a single IRQ handler call, see the
statements 3a/3b and 3c above).
Fixes: f7824ded41 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240222181324.28242-2-fancer.lancer@gmail.com
net_alloc_generic is called by net_alloc, which is called without any
locking. It reads max_gen_ptrs, which is changed under pernet_ops_rwsem. It
is read twice, first to allocate an array, then to set s.len, which is
later used to limit the bounds of the array access.
It is possible that the array is allocated and another thread is
registering a new pernet ops, increments max_gen_ptrs, which is then used
to set s.len with a larger than allocated length for the variable array.
Fix it by reading max_gen_ptrs only once in net_alloc_generic. If
max_gen_ptrs is later incremented, it will be caught in net_assign_generic.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Fixes: 073862ba5d ("netns: fix net_alloc_generic()")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240502132006.3430840-1-cascardo@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
get_maintainers.pl sometimes suggests my name and old e-mail address, so
update .mailmap to point to my current e-mail address.
Link: https://lkml.kernel.org/r/20240503085736.3354268-1-john.g.garry@oracle.com
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reported-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If we created a new node to replace an entry which had search marks set,
we were setting the search mark on every entry in that node. That works
fine when we're splitting to order 0, but when splitting to a larger
order, we must not set the search marks on the sibling entries.
Link: https://lkml.kernel.org/r/20240501153120.4094530-1-willy@infradead.org
Fixes: c010d47f10 ("mm: thp: split huge page to any lower order pages")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/ZjFGCOYk3FK_zVy3@bombadil.infradead.org
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It could not find __vdso_getcpu and __vdso_gettimeofday when test getcpu
and gettimeofday on LoongArch.
# make headers && cd tools/testing/selftests/vDSO && make
# ./vdso_test_getcpu
Could not find __vdso_getcpu
# ./vdso_test_gettimeofday
Could not find __vdso_gettimeofday
One simple way is to add LoongArch case to define version and name, just
like commit d942f231af ("selftests/vDSO: Add riscv getcpu & gettimeofday
test"), but it is not the best way.
Since each architecture has already defined names and versions in
vdso_config.h, it is proper to include vdso_config.h to get version and
name for all archs.
Link: https://lkml.kernel.org/r/20240428030530.24399-3-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/vDSO: Fix errors on LoongArch", v4.
This patch (of 2):
There exist the following errors when build vDSO selftests on LoongArch:
# make headers && cd tools/testing/selftests/vDSO && make
...
error: 'VDSO_VERSION' undeclared (first use in this function)
...
error: 'VDSO_NAMES' undeclared (first use in this function)
We can see the following code in arch/loongarch/vdso/vdso.lds.S:
VERSION
{
LINUX_5.10 {
global:
__vdso_getcpu;
__vdso_clock_getres;
__vdso_clock_gettime;
__vdso_gettimeofday;
__vdso_rt_sigreturn;
local: *;
};
}
so VDSO_VERSION should be 6 and VDSO_NAMES should be 1 for LoongArch,
add them to fix the building errors on LoongArch.
Link: https://lkml.kernel.org/r/20240428030530.24399-1-yangtiezhu@loongson.cn
Link: https://lkml.kernel.org/r/20240428030530.24399-2-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Otherwise we'll generate false lockdep positives.
Link: https://lkml.kernel.org/r/20240429082828.1615986-1-hch@lst.de
Fixes: 217b2119b9 ("mm,page_owner: implement the tracking of the stacks count")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pagemap_scan_pmd_entry() checks if uffd-wp is set on each pte to avoid
unnecessary if set. However it was previously checking with
`pte_uffd_wp(ptep_get(pte))` without first confirming that the pte was
present. It is only valid to call pte_uffd_wp() for present ptes. For
swap ptes, pte_swp_uffd_wp() must be called because the uffd-wp bit may be
kept in a different position, depending on the arch.
This was leading to test failures in the pagemap_ioctl mm selftest, when
bringing up uffd-wp support on arm64 due to incorrectly interpretting the
uffd-wp status of migration entries.
Let's fix this by using the correct check based on pte_present(). While
we are at it, let's pass the pte to make_uffd_wp_pte() to avoid the
pointless extra ptep_get() which can't be optimized out due to READ_ONCE()
on many arches.
Link: https://lkml.kernel.org/r/20240429114104.182890-1-ryan.roberts@arm.com
Fixes: 12f6b01a0b ("fs/proc/task_mmu: add fast paths to get/clear PAGE_IS_WRITTEN flag")
Closes: https://lore.kernel.org/linux-arm-kernel/ZiuyGXt0XWwRgFh9@x1n/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
make_uffd_wp_pte() was previously doing:
pte = ptep_get(ptep);
ptep_modify_prot_start(ptep);
pte = pte_mkuffd_wp(pte);
ptep_modify_prot_commit(ptep, pte);
But if another thread accessed or dirtied the pte between the first 2
calls, this could lead to loss of that information. Since
ptep_modify_prot_start() gets and clears atomically, the following is the
correct pattern and prevents any possible race. Any access after the
first call would see an invalid pte and cause a fault:
pte = ptep_modify_prot_start(ptep);
pte = pte_mkuffd_wp(pte);
ptep_modify_prot_commit(ptep, pte);
Link: https://lkml.kernel.org/r/20240429114017.182570-1-ryan.roberts@arm.com
Fixes: 52526ca7fd ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
vm_map_ram() uses IS_ERR() to validate the return value of vb_alloc(). If
vm_map_ram(page, 0, 0) is executed, vb_alloc(0, GFP_KERNEL) would return
NULL. In such a case, IS_ERR() cannot handle the return value and lead to
kernel panic by vmap_pages_range_noflush() at last. To resolve this
issue, return ERR_PTR(-EINVAL) if the size is 0.
Link: https://lkml.kernel.org/r/20240426024149.21176-1-hailong.liu@oppo.com
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Hailong.Liu <hailong.liu@oppo.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
See commit f2c817bed5 ("mm: use memalloc_nofs_save in readahead path"),
ensure that page_cache_ra_order() do not attempt to reclaim file-backed
pages too, or it leads to a deadlock, found issue when test ext4 large
folio.
INFO: task DataXceiver for:7494 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:DataXceiver for state:D stack:0 pid:7494 ppid:1 flags:0x00000200
Call trace:
__switch_to+0x14c/0x240
__schedule+0x82c/0xdd0
schedule+0x58/0xf0
io_schedule+0x24/0xa0
__folio_lock+0x130/0x300
migrate_pages_batch+0x378/0x918
migrate_pages+0x350/0x700
compact_zone+0x63c/0xb38
compact_zone_order+0xc0/0x118
try_to_compact_pages+0xb0/0x280
__alloc_pages_direct_compact+0x98/0x248
__alloc_pages+0x510/0x1110
alloc_pages+0x9c/0x130
folio_alloc+0x20/0x78
filemap_alloc_folio+0x8c/0x1b0
page_cache_ra_order+0x174/0x308
ondemand_readahead+0x1c8/0x2b8
page_cache_async_ra+0x68/0xb8
filemap_readahead.isra.0+0x64/0xa8
filemap_get_pages+0x3fc/0x5b0
filemap_splice_read+0xf4/0x280
ext4_file_splice_read+0x2c/0x48 [ext4]
vfs_splice_read.part.0+0xa8/0x118
splice_direct_to_actor+0xbc/0x288
do_splice_direct+0x9c/0x108
do_sendfile+0x328/0x468
__arm64_sys_sendfile64+0x8c/0x148
invoke_syscall+0x4c/0x118
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x4c/0x1f8
el0t_64_sync_handler+0xc0/0xc8
el0t_64_sync+0x188/0x190
Link: https://lkml.kernel.org/r/20240426112938.124740-1-wangkefeng.wang@huawei.com
Fixes: 793917d997 ("mm/readahead: Add large folio readahead")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It turned out that KMSAN instruments READ_ONCE_NOCHECK(), resulting in
false positive reports, because __no_sanitize_or_inline enforced inlining.
Properly declare __no_sanitize_or_inline under __SANITIZE_MEMORY__, so
that it does not __always_inline the annotated function.
Link: https://lkml.kernel.org/r/20240426091622.3846771-1-glider@google.com
Fixes: 5de0ce85f5 ("kmsan: mark noinstr as __no_sanitize_memory")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: syzbot+355c5bb8c1445c871ee8@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/000000000000826ac1061675b0e3@google.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
While testing lib/test_xarray in userspace I've noticed we can fail with:
make -C tools/testing/radix-tree
./tools/testing/radix-tree/xarray
BUG at check_xa_multi_store_adv_add:749
xarray: 0x55905fb21a00x head 0x55905fa1d8e0x flags 0 marks 0 0 0
0: 0x55905fa1d8e0x
xarray: ../../../lib/test_xarray.c:749: check_xa_multi_store_adv_add: Assertion `0' failed.
Aborted
We get a failure with a BUG_ON(), and that is because we actually can
fail due to -ENOMEM, the check in xas_nomem() will fix this for us so
it makes no sense to expect no failure inside the loop. So modify the
check and since this is also useful for instructional purposes clarify
the situation.
The check for XA_BUG_ON(xa, xa_load(xa, index) != p) is already done
at the end of the loop so just remove the bogus on inside the loop.
With this we now pass the test in both kernel and userspace:
In userspace:
./tools/testing/radix-tree/xarray
XArray: 149092856 of 149092856 tests passed
In kernel space:
XArray: 148257077 of 148257077 tests passed
Link: https://lkml.kernel.org/r/20240423192221.301095-3-mcgrof@kernel.org
Fixes: a60cc288a1 ("test_xarray: add tests for advanced multi-index use")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "test_xarray: couple of fixes for v6-9-rc6", v2.
Here are a couple of fixes which should be merged into the queue for
v6.9-rc6. The first one was reported by Liam, after fixing that I noticed
an issue with a test, and a fix for that is in the second patch.
This patch (of 2):
Liam reported that compiling the test_xarray on userspace was broken. I
was not even aware that was possible but you can via and you can run these
tests in userspace with:
make -C tools/testing/radix-tree
./tools/testing/radix-tree/xarray
Add the two helpers we need to fix compilation. We don't need a userspace
schedule() so just make it do nothing.
Link: https://lkml.kernel.org/r/20240423192221.301095-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20240423192221.301095-2-mcgrof@kernel.org
Fixes: a60cc288a1 ("test_xarray: add tests for advanced multi-index use")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reported-by: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With commit ea4b5b33bf ("mm,page_owner: update metadata for tail
pages"), new API __update_page_owner_handle was introduced and arguemnt
was passed in wrong order from __set_page_owner and thus page_owner is
giving wrong data.
[ 15.982420] page last allocated via order 0, migratetype Unmovable, gfp_mask 0xcc0(GFP_KERNEL), pid 80, tgid -1210279584 (insmod), ts 80, free_ts 0
Fixing the same.
Correct output:
[ 14.556482] page last allocated via order 0, migratetype Unmovable, gfp_mask 0xcc0(GFP_KERNEL), pid 80, tgid 80 (insmod), ts 14552004992, free_ts 0
Link: https://lkml.kernel.org/r/20240424111838.3782931-1-hariom1.p@samsung.com
Fixes: ea4b5b33bf ("mm,page_owner: update metadata for tail pages")
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Hariom Panthi <hariom1.p@samsung.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Rohit Thapliyal <r.thapliyal@samsung.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently the code calls mas_start() followed by mas_data_end() if the
maple state is MA_START, but mas_start() may return with the maple state
node == NULL. This will lead to a null pointer dereference when checking
information in the NULL node, which is done in mas_data_end().
Avoid setting the offset if there is no node by waiting until after the
maple state is checked for an empty or single entry state.
A user could trigger the events to cause a kernel oops by unmapping all
vmas to produce an empty maple tree, then mapping a vma that would cause
the scenario described above.
Link: https://lkml.kernel.org/r/20240422203349.2418465-1-Liam.Howlett@oracle.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Marius Fleischer <fleischermarius@gmail.com>
Closes: https://lore.kernel.org/lkml/CAJg=8jyuSxDL6XvqEXY_66M20psRK2J53oBTP+fjV5xpW2-R6w@mail.gmail.com/
Link: https://lore.kernel.org/lkml/CAJg=8jyuSxDL6XvqEXY_66M20psRK2J53oBTP+fjV5xpW2-R6w@mail.gmail.com/
Tested-by: Marius Fleischer <fleischermarius@gmail.com>
Tested-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Userfaultfd unregister includes a step to remove wr-protect bits from all
the relevant pgtable entries, but that only covered an explicit
UFFDIO_UNREGISTER ioctl, not a close() on the userfaultfd itself. Cover
that too. This fixes a WARN trace.
The only user visible side effect is the user can observe leftover
wr-protect bits even if the user close()ed on an userfaultfd when
releasing the last reference of it. However hopefully that should be
harmless, and nothing bad should happen even if so.
This change is now more important after the recent page-table-check
patch we merged in mm-unstable (446dd9ad37d0 ("mm/page_table_check:
support userfault wr-protect entries")), as we'll do sanity check on
uffd-wp bits without vma context. So it's better if we can 100%
guarantee no uffd-wp bit leftovers, to make sure each report will be
valid.
Link: https://lore.kernel.org/all/000000000000ca4df20616a0fe16@google.com/
Fixes: f369b07c86 ("mm/uffd: reset write protection when unregister with wp-mode")
Analyzed-by: David Hildenbrand <david@redhat.com>
Link: https://lkml.kernel.org/r/20240422133311.2987675-1-peterx@redhat.com
Reported-by: syzbot+d8426b591c36b21c750e@syzkaller.appspotmail.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep->mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.
Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.
Link: https://lore.kernel.org/lkml/0000000000002d631f0615918f1e@google.com/
Reported-by: syzbot+045b454ab35fd82a35fb@syzkaller.appspotmail.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
in the versal EDAC driver
-----BEGIN PGP SIGNATURE-----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=0/mm
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v6.9_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix error logging and check user-supplied data when injecting an
error in the versal EDAC driver
* tag 'edac_urgent_for_v6.9_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versal: Do not log total error counts
EDAC/versal: Check user-supplied data before injecting an error
EDAC/versal: Do not register for NOC errors
- Fix incorrect delay handling in the plpks (keystore) code.
- Fix a panic when an LPAR boots with a frozen PE.
Thanks to: Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, Nayna Jain.
-----BEGIN PGP SIGNATURE-----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=nXL6
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix incorrect delay handling in the plpks (keystore) code
- Fix a panic when an LPAR boots with a frozen PE
Thanks to Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, and Nayna
Jain.
* tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: LPAR panics during boot up with a frozen PE
powerpc/pseries: make max polling consistent for longer H_CALLs
- Remove the broken vsyscall emulation code from
the page fault code.
- Fix kexec crash triggered by certain SEV RMP
table layouts.
- Fix unchecked MSR access error when disabling
the x2APIC via iommu=off.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=o9E8
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Remove the broken vsyscall emulation code from
the page fault code
- Fix kexec crash triggered by certain SEV RMP
table layouts
- Fix unchecked MSR access error when disabling
the x2APIC via iommu=off
* tag 'x86-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove broken vsyscall emulation code from the page fault code
x86/apic: Don't access the APIC when disabling x2APIC
x86/sev: Add callback to apply RMP table fixups for kexec
x86/e820: Add a new e820 table update helper
Here are some small char/misc/other driver fixes and new device ids for
6.9-rc7 that resolve some reported problems.
Included in here are:
- iio driver fixes
- mei driver fix and new device ids
- dyndbg bugfix
- pvpanic-pci driver bugfix
- slimbus driver bugfix
- fpga new device id
All have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZjdD2Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk38wCeJeUXW4/yQ4BTj7cHir0aOowVs+UAnAxCUwzt
NpooaVg3v9tzLtvAOp1O
=YfmA
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes and new device ids
for 6.9-rc7 that resolve some reported problems.
Included in here are:
- iio driver fixes
- mei driver fix and new device ids
- dyndbg bugfix
- pvpanic-pci driver bugfix
- slimbus driver bugfix
- fpga new device id
All have been in linux-next with no reported problems"
* tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
slimbus: qcom-ngd-ctrl: Add timeout for wait operation
dyndbg: fix old BUG_ON in >control parser
misc/pvpanic-pci: register attributes via pci_driver
fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card
mei: me: add lunar lake point M DID
mei: pxp: match against PCI_CLASS_DISPLAY_OTHER
iio:imu: adis16475: Fix sync mode setting
iio: accel: mxc4005: Reset chip on probe() and resume()
iio: accel: mxc4005: Interrupt handling fixes
dt-bindings: iio: health: maxim,max30102: fix compatible check
iio: pressure: Fixes SPI support for BMP3xx devices
iio: pressure: Fixes BME280 SPI driver data
Here are some small USB driver fixes for reported problems for 6.9-rc7.
Included in here are:
- usb core fixes for found issues
- typec driver fixes for reported problems
- usb gadget driver fixes for reported problems
- xhci build fixes
- dwc3 driver fixes for reported issues
All of these have been in linux-next this past week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZjdEhQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylZ0wCgpMcwSdBww3xH3JHwYjukeW8EPKYAn3N3CBb+
s/e/cETFHgg8RpWq38Sy
=/6D3
-----END PGP SIGNATURE-----
Merge tag 'usb-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for reported problems for
6.9-rc7. Included in here are:
- usb core fixes for found issues
- typec driver fixes for reported problems
- usb gadget driver fixes for reported problems
- xhci build fixes
- dwc3 driver fixes for reported issues
All of these have been in linux-next this past week with no reported
problems"
* tag 'usb-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: Check for port partner validity before consuming it
usb: typec: tcpm: enforce ready state when queueing alt mode vdm
usb: typec: tcpm: unregister existing source caps before re-registration
usb: typec: tcpm: clear pd_event queue in PORT_RESET
usb: typec: tcpm: queue correct sop type in tcpm_queue_vdm_unlocked
usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device
usb: ohci: Prevent missed ohci interrupts
usb: typec: qcom-pmic: fix pdphy start() error handling
usb: typec: qcom-pmic: fix use-after-free on late probe errors
usb: gadget: f_fs: Fix a race condition when processing setup packets.
USB: core: Fix access violation during port device removal
usb: dwc3: core: Prevent phy suspend during init
usb: xhci-plat: Don't include xhci.h
usb: gadget: uvc: use correct buffer size when parsing configfs lists
usb: gadget: composite: fix OS descriptors w_value logic
usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete
- a new ID for ASUS ROG RAIKIRI controllers added to xpad driver
- amimouse driver structure annotated with __refdata to prevent section
mismatch warnings.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZjb8AwAKCRBAj56VGEWX
nEyMAP99BLxJkuEq6nyiHuAvXUpDAX/unCZmsCyt/p5Q2dEfGgEAoDn1Al+0EIb4
yLqu6IeHPh7YGQ/oS0CFJYrZeURyzwY=
=oso0
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a new ID for ASUS ROG RAIKIRI controllers added to xpad driver
- amimouse driver structure annotated with __refdata to prevent section
mismatch warnings.
* tag 'input-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: amimouse - mark driver struct with __refdata to prevent section mismatch
Input: xpad - add support for ASUS ROG RAIKIRI
- probe-events: Fix memory leak in parsing probe argument. There is a
memory leak (forget to free an allocated buffer) in a memory allocation
failure path. Fixes it to jump to the correct error handling code.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmY2NRQbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bIacH/RmSQaraWiwQmMaWT8Pp
wotOxtMYnl2uLNeVx3vn55+G1Xr/rJP3E9EBGTa+HMPky3trea07eBM5B3UnwT2y
Y75Nhm6z3SFaLBygdKmQZgyIJF1W9w6J1cfqPwPlfR3h08a/9rNojd/DKBo7fLjk
uwGAUHsB6sNhTvRF64wtr+I7V+8CGwNnApyQvf/mLnHsELerzm86nxDhXcfIvb1P
UbM4nupqrV3QYCLYdXmma34PFFJzS3ioINGn692QtHFOSEdSwJfqsNv6AU/w98zD
8o2rlSadc64Yl74vMLFRtBVS3K49VQXNgUUXjx2Gpj9/v80qn+B41HwaNSl1Lagx
lIY=
=tob5
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- probe-events: Fix memory leak in parsing probe argument.
There is a memory leak (forget to free an allocated buffer) in a
memory allocation failure path. Fix it to jump to the correct error
handling code.
* tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix memory leak in traceprobe_parse_probe_arg_body()
- Fix RCU callback of freeing an eventfs_inode.
The freeing of the eventfs_inode from the kref going to zero
freed the contents of the eventfs_inode and then used kfree_rcu()
to free the inode itself. But the contents should also be protected
by RCU. Switch to a call_rcu() that calls a function to free all
of the eventfs_inode after the RCU synchronization.
- The tracing subsystem maps its own descriptor to a file represented by
eventfs. The freeing of this descriptor needs to know when the
last reference of an eventfs_inode is released, but currently
there is no interface for that. Add a "release" callback to
the eventfs_inode entry array that allows for freeing of data
that can be referenced by the eventfs_inode being opened.
Then increment the ref counter for this descriptor when the
eventfs_inode file is created, and decrement/free it when the
last reference to the eventfs_inode is released and the file
is removed. This prevents races between freeing the descriptor
and the opening of the eventfs file.
- Fix the permission processing of eventfs.
The change to make the permissions of eventfs default to the mount
point but keep track of when changes were made had a side effect
that could cause security concerns. When the tracefs is remounted
with a given gid or uid, all the files within it should inherit
that gid or uid. But if the admin had changed the permission of
some file within the tracefs file system, it would not get updated
by the remount. This caused the kselftest of file permissions
to fail the second time it is run. The first time, all changes
would look fine, but the second time, because the changes were
"saved", the remount did not reset them.
Create a link list of all existing tracefs inodes, and clear the
saved flags on them on a remount if the remount changes the
corresponding gid or uid fields.
This also simplifies the code by removing the distinction between the
toplevel eventfs and an instance eventfs. They should both act the
same. They were different because of a misconception due to the
remount not resetting the flags. Now that remount resets all the
files and directories to default to the root node if a uid/gid is
specified, it makes the logic simpler to implement.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZjXxzxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqzGAQCX8g7gtngGgwSsWqPW5GmecCifwFja
k7cVEDhMYPnDeAEAkYi2ZBgJRkPsWPfMRClDK/DXP4woOo58asxtIxfTMgg=
=mCkt
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.9-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing and tracefs fixes from Steven Rostedt:
- Fix RCU callback of freeing an eventfs_inode.
The freeing of the eventfs_inode from the kref going to zero freed
the contents of the eventfs_inode and then used kfree_rcu() to free
the inode itself. But the contents should also be protected by RCU.
Switch to a call_rcu() that calls a function to free all of the
eventfs_inode after the RCU synchronization.
- The tracing subsystem maps its own descriptor to a file represented
by eventfs. The freeing of this descriptor needs to know when the
last reference of an eventfs_inode is released, but currently there
is no interface for that.
Add a "release" callback to the eventfs_inode entry array that allows
for freeing of data that can be referenced by the eventfs_inode being
opened. Then increment the ref counter for this descriptor when the
eventfs_inode file is created, and decrement/free it when the last
reference to the eventfs_inode is released and the file is removed.
This prevents races between freeing the descriptor and the opening of
the eventfs file.
- Fix the permission processing of eventfs.
The change to make the permissions of eventfs default to the mount
point but keep track of when changes were made had a side effect that
could cause security concerns. When the tracefs is remounted with a
given gid or uid, all the files within it should inherit that gid or
uid. But if the admin had changed the permission of some file within
the tracefs file system, it would not get updated by the remount.
This caused the kselftest of file permissions to fail the second time
it is run. The first time, all changes would look fine, but the
second time, because the changes were "saved", the remount did not
reset them.
Create a link list of all existing tracefs inodes, and clear the
saved flags on them on a remount if the remount changes the
corresponding gid or uid fields.
This also simplifies the code by removing the distinction between the
toplevel eventfs and an instance eventfs. They should both act the
same. They were different because of a misconception due to the
remount not resetting the flags. Now that remount resets all the
files and directories to default to the root node if a uid/gid is
specified, it makes the logic simpler to implement.
* tag 'trace-v6.9-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Have "events" directory get permissions from its parent
eventfs: Do not treat events directory different than other directories
eventfs: Do not differentiate the toplevel events directory
tracefs: Still use mount point as default permissions for instances
tracefs: Reset permissions on remount if permissions are options
eventfs: Free all of the eventfs_inode after RCU
eventfs/tracing: Add callback for release of an eventfs_inode
- fix the combination of restricted pools and dynamic swiotlb
(Will Deacon)
-----BEGIN PGP SIGNATURE-----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=05zN
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.9-2024-05-04' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- fix the combination of restricted pools and dynamic swiotlb
(Will Deacon)
* tag 'dma-mapping-6.9-2024-05-04' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: initialise restricted pool list_head when SWIOTLB_DYNAMIC=y
- Avoid a deadlock in the Qualcomm clk driver by making the regulator
which supplies the GDSC optional.
- Restore RPM clks on Qualcomm msm8976 by setting num_clks.
- Fix Allwinner H6 CPU rate changing logic to avoid system crashes by
temporarily reparenting the CPU clk to something that isn't being
changed.
- Set a MIPI PLL min/max rate on Allwinner A64 to fix blank screens on
some devices.
- Revert back to of_match_device() in the Samsung clkout driver to get
the match data based on the parent device's compatible string.
-----BEGIN PGP SIGNATURE-----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=yAwH
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes:
- Avoid a deadlock in the Qualcomm clk driver by making the regulator
which supplies the GDSC optional
- Restore RPM clks on Qualcomm msm8976 by setting num_clks
- Fix Allwinner H6 CPU rate changing logic to avoid system crashes by
temporarily reparenting the CPU clk to something that isn't being
changed
- Set a MIPI PLL min/max rate on Allwinner A64 to fix blank screens
on some devices
- Revert back to of_match_device() in the Samsung clkout driver to
get the match data based on the parent device's compatible string"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: Revert "clk: Use device_get_match_data()"
clk: sunxi-ng: a64: Set minimum and maximum rate for PLL-MIPI
clk: sunxi-ng: common: Support minimum and maximum rate
clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change
clk: qcom: smd-rpm: Restore msm8976 num_clk
clk: qcom: gdsc: treat optional supplies as optional
This patch fix xfstests generic/070 test with smb2 leases = yes.
cifs.ko doesn't set parent lease key and epoch in create context v2 lease.
ksmbd suppose that parent lease and epoch are vaild if data length is
v2 lease context size and handle directory lease using this values.
ksmbd should hanle it as v1 lease not v2 lease if parent lease key and
epoch are not set in create context v2 lease.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
lease break wait for lease break acknowledgment.
rwsem is more suitable than unlock while traversing the list for parent
lease break in ->m_op_list.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch fixes generic/011 when enable smb2 leases.
if ksmbd sends multiple notifications for a file, cifs increments
the reference count of the file but it does not decrement the count by
the failure of queue_work.
So even if the file is closed, cifs does not send a SMB2_CLOSE request.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ΕΛΕΝΗ reported that ksmbd binds to the IPV6 wildcard (::) by default for
ipv4 and ipv6 binding. So IPV4 connections are successful only when
the Linux system parameter bindv6only is set to 0 [default value].
If this parameter is set to 1, then the ipv6 wildcard only represents
any IPV6 address. Samba creates different sockets for ipv4 and ipv6
by default. This patch off sk_ipv6only to support IPV4/IPV6 connections
without creating two sockets.
Cc: stable@vger.kernel.org
Reported-by: ΕΛΕΝΗ ΤΖΑΒΕΛΛΑ <helentzavellas@yahoo.gr>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Through hidraw, userspace can cause a status report to be sent
from the device. The parsing in ccp_raw_event() may happen in
parallel to a send_usb_cmd() call (which resets the completion
for tracking the report) if it's running on a different CPU where
bottom half interrupts are not disabled.
Add a spinlock around the complete_all() in ccp_raw_event() and
reinit_completion() in send_usb_cmd() to prevent race issues.
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-4-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In ccp_raw_event(), the ccp->wait_input_report completion is
completed once. Since we're waiting for exactly one report in
send_usb_cmd(), use complete_all() instead of complete()
to mark the completion as spent.
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Introduce cmd_buffer, a separate buffer for storing only
the command that is sent to the device. Before this separation,
the existing buffer was shared for both the command and the
report received in ccp_raw_event(), which was copied into it.
However, because of hidraw, the raw event parsing may be triggered
in the middle of sending a command, resulting in outputting gibberish
to the device. Using a separate buffer resolves this.
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The events directory gets its permissions from the root inode. But this
can cause an inconsistency if the instances directory changes its
permissions, as the permissions of the created directories under it should
inherit the permissions of the instances directory when directories under
it are created.
Currently the behavior is:
# cd /sys/kernel/tracing
# chgrp 1002 instances
# mkdir instances/foo
# ls -l instances/foo
[..]
-r--r----- 1 root lkp 0 May 1 18:55 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 18:55 current_tracer
-rw-r----- 1 root lkp 0 May 1 18:55 error_log
drwxr-xr-x 1 root root 0 May 1 18:55 events
--w------- 1 root lkp 0 May 1 18:55 free_buffer
drwxr-x--- 2 root lkp 0 May 1 18:55 options
drwxr-x--- 10 root lkp 0 May 1 18:55 per_cpu
-rw-r----- 1 root lkp 0 May 1 18:55 set_event
All the files and directories under "foo" has the "lkp" group except the
"events" directory. That's because its getting its default value from the
mount point instead of its parent.
Have the "events" directory make its default value based on its parent's
permissions. That now gives:
# ls -l instances/foo
[..]
-rw-r----- 1 root lkp 0 May 1 21:16 buffer_subbuf_size_kb
-r--r----- 1 root lkp 0 May 1 21:16 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:16 current_tracer
-rw-r----- 1 root lkp 0 May 1 21:16 error_log
drwxr-xr-x 1 root lkp 0 May 1 21:16 events
--w------- 1 root lkp 0 May 1 21:16 free_buffer
drwxr-x--- 2 root lkp 0 May 1 21:16 options
drwxr-x--- 10 root lkp 0 May 1 21:16 per_cpu
-rw-r----- 1 root lkp 0 May 1 21:16 set_event
Link: https://lore.kernel.org/linux-trace-kernel/20240502200906.161887248@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Treat the events directory the same as other directories when it comes to
permissions. The events directory was considered different because it's
dentry is persistent, whereas the other directory dentries are created
when accessed. But the way tracefs now does its ownership by using the
root dentry's permissions as the default permissions, the events directory
can get out of sync when a remount is performed setting the group and user
permissions.
Remove the special case for the events directory on setting the
attributes. This allows the updates caused by remount to work properly as
well as simplifies the code.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200906.002923579@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The toplevel events directory is really no different than the events
directory of instances. Having the two be different caused
inconsistencies and made it harder to fix the permissions bugs.
Make all events directories act the same.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.846448710@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If the instances directory's permissions were never change, then have it
and its children use the mount point permissions as the default.
Currently, the permissions of instance directories are determined by the
instance directory's permissions itself. But if the tracefs file system is
remounted and changes the permissions, the instance directory and its
children should use the new permission.
But because both the instance directory and its children use the instance
directory's inode for permissions, it misses the update.
To demonstrate this:
# cd /sys/kernel/tracing/
# mkdir instances/foo
# ls -ld instances/foo
drwxr-x--- 5 root root 0 May 1 19:07 instances/foo
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 18:57 instances
# ls -ld current_tracer
-rw-r----- 1 root root 0 May 1 18:57 current_tracer
# mount -o remount,gid=1002 .
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 18:57 instances
# ls -ld instances/foo/
drwxr-x--- 5 root root 0 May 1 19:07 instances/foo/
# ls -ld current_tracer
-rw-r----- 1 root lkp 0 May 1 18:57 current_tracer
Notice that changing the group id to that of "lkp" did not affect the
instances directory nor its children. It should have been:
# ls -ld current_tracer
-rw-r----- 1 root root 0 May 1 19:19 current_tracer
# ls -ld instances/foo/
drwxr-x--- 5 root root 0 May 1 19:25 instances/foo/
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 19:19 instances
# mount -o remount,gid=1002 .
# ls -ld current_tracer
-rw-r----- 1 root lkp 0 May 1 19:19 current_tracer
# ls -ld instances
drwxr-x--- 3 root lkp 0 May 1 19:19 instances
# ls -ld instances/foo/
drwxr-x--- 5 root lkp 0 May 1 19:25 instances/foo/
Where all files were updated by the remount gid update.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.686838327@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's an inconsistency with the way permissions are handled in tracefs.
Because the permissions are generated when accessed, they default to the
root inode's permission if they were never set by the user. If the user
sets the permissions, then a flag is set and the permissions are saved via
the inode (for tracefs files) or an internal attribute field (for
eventfs).
But if a remount happens that specify the permissions, all the files that
were not changed by the user gets updated, but the ones that were are not.
If the user were to remount the file system with a given permission, then
all files and directories within that file system should be updated.
This can cause security issues if a file's permission was updated but the
admin forgot about it. They could incorrectly think that remounting with
permissions set would update all files, but miss some.
For example:
# cd /sys/kernel/tracing
# chgrp 1002 current_tracer
# ls -l
[..]
-rw-r----- 1 root root 0 May 1 21:25 buffer_size_kb
-rw-r----- 1 root root 0 May 1 21:25 buffer_subbuf_size_kb
-r--r----- 1 root root 0 May 1 21:25 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:25 current_tracer
-rw-r----- 1 root root 0 May 1 21:25 dynamic_events
-r--r----- 1 root root 0 May 1 21:25 dyn_ftrace_total_info
-r--r----- 1 root root 0 May 1 21:25 enabled_functions
Where current_tracer now has group "lkp".
# mount -o remount,gid=1001 .
# ls -l
-rw-r----- 1 root tracing 0 May 1 21:25 buffer_size_kb
-rw-r----- 1 root tracing 0 May 1 21:25 buffer_subbuf_size_kb
-r--r----- 1 root tracing 0 May 1 21:25 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:25 current_tracer
-rw-r----- 1 root tracing 0 May 1 21:25 dynamic_events
-r--r----- 1 root tracing 0 May 1 21:25 dyn_ftrace_total_info
-r--r----- 1 root tracing 0 May 1 21:25 enabled_functions
Everything changed but the "current_tracer".
Add a new link list that keeps track of all the tracefs_inodes which has
the permission flags that tell if the file/dir should use the root inode's
permission or not. Then on remount, clear all the flags so that the
default behavior of using the root inode's permission is done for all
files and directories.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.529542160@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The freeing of eventfs_inode via a kfree_rcu() callback. But the content
of the eventfs_inode was being freed after the last kref. This is
dangerous, as changes are being made that can access the content of an
eventfs_inode from an RCU loop.
Instead of using kfree_rcu() use call_rcu() that calls a function to do
all the freeing of the eventfs_inode after a RCU grace period has expired.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.370261163@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 43aa6f97c2 ("eventfs: Get rid of dentry pointers without refcounts")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Synthetic events create and destroy tracefs files when they are created
and removed. The tracing subsystem has its own file descriptor
representing the state of the events attached to the tracefs files.
There's a race between the eventfs files and this file descriptor of the
tracing system where the following can cause an issue:
With two scripts 'A' and 'B' doing:
Script 'A':
echo "hello int aaa" > /sys/kernel/tracing/synthetic_events
while :
do
echo 0 > /sys/kernel/tracing/events/synthetic/hello/enable
done
Script 'B':
echo > /sys/kernel/tracing/synthetic_events
Script 'A' creates a synthetic event "hello" and then just writes zero
into its enable file.
Script 'B' removes all synthetic events (including the newly created
"hello" event).
What happens is that the opening of the "enable" file has:
{
struct trace_event_file *file = inode->i_private;
int ret;
ret = tracing_check_open_get_tr(file->tr);
[..]
But deleting the events frees the "file" descriptor, and a "use after
free" happens with the dereference at "file->tr".
The file descriptor does have a reference counter, but there needs to be a
way to decrement it from the eventfs when the eventfs_inode is removed
that represents this file descriptor.
Add an optional "release" callback to the eventfs_entry array structure,
that gets called when the eventfs file is about to be removed. This allows
for the creating on the eventfs file to increment the tracing file
descriptor ref counter. When the eventfs file is deleted, it can call the
release function that will call the put function for the tracing file
descriptor.
This will protect the tracing file from being freed while a eventfs file
that references it is being opened.
Link: https://lore.kernel.org/linux-trace-kernel/20240426073410.17154-1-Tze-nan.Wu@mediatek.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240502090315.448cba46@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5790b1fb3d ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: Tze-nan wu <Tze-nan.Wu@mediatek.com>
Tested-by: Tze-nan Wu (吳澤南) <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Add missing RCH support for endpoint access_coordinate calculation
-----BEGIN PGP SIGNATURE-----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=CqsW
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fix from Dave Jiang:
"Add missing RCH support for endpoint access_coordinate calculation.
A late bug was reported by Robert Richter that the Restricted CXL Host
(RCH) support was missing in the CXL endpoint access_coordinate
calculation.
The missing support causes the topology iterator to stumble over a
NULL pointer and triggers a kernel OOPS on a platform with CXL 1.1
support.
The fix bypasses RCH topology as the access_coordinate calculation is
not necessary since RCH does not support hotplug and the memory region
exported should be covered by the HMAT table already.
A unit test is also added to cxl_test to check against future
regressions on the topology iterator"
* tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Fix cxl_endpoint_get_perf_coordinate() support for RCH
