mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-28 14:44:10 +08:00
6429e46304
2762 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Ioana Ciornei
|
296c6264d4 |
bus: fsl-mc: add autorescan sysfs
Add the autorescan sysfs in order to enable/disable the DPRC IRQs on which automatic rescan of the bus is performed. This is important when dynamic creation of objects is needed to happen in a timely manner because object creation can be bundled together. Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20210114170752.2927915-6-ciorneiioana@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ioana Ciornei
|
3f60994381 |
bus: fsl-mc: add bus rescan attribute
Introduce the rescan attribute as a bus attribute to synchronize the fsl-mc bus objects and the MC firmware. To rescan the fsl-mc bus, e.g., echo 1 > /sys/bus/fsl-mc/rescan Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20210114170752.2927915-5-ciorneiioana@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
zhenwei pi
|
8d6da6575f |
misc: pvpanic: introduce events device attribue
Suggested by Paolo & Greg, add 'events' device attribute that can be used to limit which capabilities the driver uses. Finally, the pvpanic guest driver works by the limitation of both device capability and user setting. Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20210110115358.79100-3-pizhenwei@bytedance.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
zhenwei pi
|
487709fa1b |
misc: pvpanic: introduce device capability
According to pvpanic spec: https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/specs/pvpanic.txt The guest should determine pvpanic capability by RDPT, so initialize capability during device probing. There is no need to register panic notifier callback function if no events supported. Before sending event to host side, check capability firstly. Suggested by Greg KH, use sysfs to expose capability to user space, also add new sysfs attribute in document. Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20210110115358.79100-2-pizhenwei@bytedance.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Martin K. Petersen
|
4d82e9db42 |
Merge branch '5.11/scsi-fixes' into 5.12/scsi-queue
The UFS core has received a substantial rework this cycle. This in turn has caused a merge conflict in linux-next. Merge 5.11/scsi-fixes into 5.12/scsi-queue and resolve the conflict. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
Raphael Gianotti
|
b3f82afc10 |
IMA: Measure kernel version in early boot
The integrity of a kernel can be verified by the boot loader on cold
boot, and during kexec, by the current running kernel, before it is
loaded. However, it is still possible that the new kernel being
loaded is older than the current kernel, and/or has known
vulnerabilities. Therefore, it is imperative that an attestation
service be able to verify the version of the kernel being loaded on
the client, from cold boot and subsequent kexec system calls,
ensuring that only kernels with versions known to be good are loaded.
Measure the kernel version using ima_measure_critical_data() early on
in the boot sequence, reducing the chances of known kernel
vulnerabilities being exploited. With IMA being part of the kernel,
this overall approach makes the measurement itself more trustworthy.
To enable measuring the kernel version "ima_policy=critical_data"
needs to be added to the kernel command line arguments.
For example,
BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset ima_policy=critical_data
If runtime measurement of the kernel version is ever needed, the
following should be added to /etc/ima/ima-policy:
measure func=CRITICAL_DATA label=kernel_info
To extract the measured data after boot, the following command can be used:
grep -m 1 "kernel_version" \
/sys/kernel/security/integrity/ima/ascii_runtime_measurements
Sample output from the command above:
10 a8297d408e9d5155728b619761d0dd4cedf5ef5f ima-buf
sha256:5660e19945be0119bc19cbbf8d9c33a09935ab5d30dad48aa11f879c67d70988
kernel_version 352e31312e302d7263332d31363138372d676564623634666537383234342d6469727479
The above hex-ascii string corresponds to the kernel version
(e.g. xxd -r -p):
5.11.0-rc3-16187-gedb64fe78244-dirty
Signed-off-by: Raphael Gianotti <raphgi@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
||
Greg Kroah-Hartman
|
0f8b29faba |
Merge 5.11-rc5 into tty-next
We need the fixes in here and this resolves a merge issue in drivers/tty/tty_io.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
66afbe4d63 |
Merge 5.11-rc5 into char-misc-next
We need the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
ec52736c35 |
Merge 5.11-rc5 into staging-next
We need the IIO/Staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Linus Torvalds
|
443d11297b |
Driver core fixes for 5.11-rc5
Here are some small driver core fixes for 5.11-rc5 that resolve some
reported problems:
- revert of a -rc1 patch that was causing problems with some
machines
- device link device name collision problem fix (busses only
have to name devices unique to their bus, not unique to all
busses)
- kernfs splice bugfixes to resolve firmware loading problems
for Qualcomm systems.
- other tiny driver core fixes for minor issues reported.
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYA1qGw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymd2ACgzVEpWJddtLNz+9guU9kAIIPcNboAn2GreCle
vgNkgCapi2ZjYtWBk8Cl
=YNIw
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.11-rc5 that resolve some
reported problems:
- revert of a -rc1 patch that was causing problems with some machines
- device link device name collision problem fix (busses only have to
name devices unique to their bus, not unique to all busses)
- kernfs splice bugfixes to resolve firmware loading problems for
Qualcomm systems.
- other tiny driver core fixes for minor issues reported.
All of these have been in linux-next with no reported problems"
* tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix device link device name collision
driver core: Extend device_is_dependent()
kernfs: wire up ->splice_read and ->splice_write
kernfs: implement ->write_iter
kernfs: implement ->read_iter
Revert "driver core: Reorder devices on successful probe"
Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
drivers core: Free dma_range_map when driver probe failed
|
||
Cristian Pop
|
b1a1fd93e1 |
Documentation/ABI/testing: Add documentation for AD5766 new ABI
New interface is proposed for dither functionality. This future allows composing an external signals to the selected output channel. The dither signal can be turned on/off, scaled, inverted, or it can be selected from different sources. Signed-off-by: Cristian Pop <cristian.pop@analog.com> Link: https://lore.kernel.org/r/20210115112105.58652-2-cristian.pop@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Ye Xiang
|
3cc718bc79 |
iio:Documentation: Add documentation for hinge sensor channels
Add channel description for hinge sensor, including channel label attribute and raw data description. Signed-off-by: Ye Xiang <xiang.ye@intel.com> Link: https://lore.kernel.org/r/20201215054444.9324-4-xiang.ye@intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Saravana Kannan
|
e020ff611b |
driver core: Fix device link device name collision
The device link device's name was of the form:
<supplier-dev-name>--<consumer-dev-name>
This can cause name collision as reported here [1] as device names are
not globally unique. Since device names have to be unique within the
bus/class, add the bus/class name as a prefix to the device names used to
construct the device link device name.
So the devuce link device's name will be of the form:
<supplier-bus-name>:<supplier-dev-name>--<consumer-bus-name>:<consumer-dev-name>
[1] - https://lore.kernel.org/lkml/20201229033440.32142-1-michael@walle.cc/
Fixes:
|
||
Bean Huo
|
06aea26676 |
scsi: ufs: docs: ABI: Add wb_on documentation for new entry wb_on
Adds UFS sysfs documentation for new entry wb_on. [mkp: fix doc formatting] Link: https://lore.kernel.org/r/20210119163847.20165-3-huobean@gmail.com Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> fix format |
||
Uwe Kleine-König
|
fd4a641ac8 |
leds: trigger: implement a tty trigger
Usage is as follows: myled=ledname tty=ttyS0 echo tty > /sys/class/leds/$myled/trigger echo $tty > /sys/class/leds/$myled/ttyname . When this new trigger is active it periodically checks the tty's statistics and when it changed since the last check the led is flashed once. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210113173018.bq2fkea2o3yp6rf6@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Mika Westerberg
|
3da88be249 |
thunderbolt: Add support for de-authorizing devices
In some cases it is useful to be able de-authorize devices. For example if user logs out the userspace can have a policy that disconnects PCIe devices until logged in again. This is only possible for software based connection manager as it directly controls the tunnels. For this reason make the authorized attribute accept writing 0 which makes the software connection manager to tear down the corresponding PCIe tunnel. Userspace can check if this is supported by reading a new domain attribute deauthorization, that holds 1 in that case. While there correct tb_domain_approve_switch() kernel-doc and description of authorized attribute to mention that it is only about PCIe tunnels. Cc: Christian Kellner <christian@kellner.me> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> |
||
Lakshmi Ramasubramanian
|
fdd1ffe8a8 |
selinux: include a consumer of the new IMA critical data hook
SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
Tushar Sugandhi
|
47d76a4840 |
IMA: limit critical data measurement based on a label
Integrity critical data may belong to a single subsystem or it may arise from cross subsystem interaction. Currently there is no mechanism to group or limit the data based on certain label. Limiting and grouping critical data based on a label would make it flexible and configurable to measure. Define "label:=", a new IMA policy condition, for the IMA func CRITICAL_DATA to allow grouping and limiting measurement of integrity critical data. Limit the measurement to the labels that are specified in the IMA policy - CRITICAL_DATA+"label:=". If "label:=" is not provided with the func CRITICAL_DATA, measure all the input integrity critical data. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
|
Tushar Sugandhi
|
c4e43aa2ee |
IMA: add policy rule to measure critical data
A new IMA policy rule is needed for the IMA hook ima_measure_critical_data() and the corresponding func CRITICAL_DATA for measuring the input buffer. The policy rule should ensure the buffer would get measured only when the policy rule allows the action. The policy rule should also support the necessary constraints (flags etc.) for integrity critical buffer data measurements. Add policy rule support for measuring integrity critical data. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
Lukas Bulwahn
|
f2cb4b2397 |
scsi: docs: ABI: sysfs-driver-ufs: Rectify table formatting
Commit
|
||
Mike Looijmans
|
cd900f181a |
power/supply: Add ltc4162-l-charger
Add support for the LTC4162-L Li-Ion battery charger. The driver allows reading back telemetry and to set some charging options like the input current limit. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> |
||
Adrian Hunter
|
0b2894cd0f |
scsi: docs: ABI: sysfs-driver-ufs: Add DeepSleep power mode
Update sysfs documentation for addition of DeepSleep power mode.
Link: https://lore.kernel.org/r/20210104155026.16417-1-adrian.hunter@intel.com
Fixes:
|
||
Xu Yilun
|
477dfdccfc |
memory: dfl-emif: add the DFL EMIF private feature driver
This driver is for the EMIF private feature implemented under FPGA Device Feature List (DFL) framework. It is used to expose memory interface status information as well as memory clearing control. The purpose of memory clearing block is to zero out all private memory when FPGA is to be reprogrammed. This gives users a reliable method to prevent potential data leakage. [mdf@kernel.org: Fixed up ABI doc] Reviewed-by: Tom Rix <trix@redhat.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Link: https://lore.kernel.org/r/20210107043714.991646-9-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Xu Yilun
|
56172ab353 |
fpga: dfl: add support for N3000 Nios private feature
This patch adds support for the Nios handshake private feature on Intel PAC (Programmable Acceleration Card) N3000. The Nios is the embedded processor on the FPGA card. This private feature provides a handshake interface to FPGA Nios firmware, which receives retimer configuration command from host and executes via an internal SPI master (spi-altera). When Nios finishes the configuration, host takes over the ownership of the SPI master to control an Intel MAX10 BMC (Board Management Controller) Chip on the SPI bus. For Nios firmware handshake part, this driver requests the retimer configuration for Nios firmware on probe, and adds some sysfs nodes for user to query the onboard retimer's working mode and Nios firmware version. For SPI part, this driver adds a spi-altera platform device as well as the MAX10 BMC spi slave info. A spi-altera driver will be matched to handle the following SPI work. [mdf@kernel.org: Fixed up ABI doc kernel release] Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210107043714.991646-8-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Mark Pearson
|
8e0cbf3563 |
Documentation: Add documentation for new platform_profile sysfs attribute
On modern systems the platform performance, temperature, fan and other hardware related characteristics are often dynamically configurable. The profile is often automatically adjusted to the load by some automatic-mechanism (which may very well live outside the kernel). These auto platform-adjustment mechanisms often can be configured with one of several 'platform-profiles', with either a bias towards low-power consumption or towards performance (and higher power consumption and thermals). Introduce a new platform_profile sysfs API which offers a generic API for selecting the performance-profile of these automatic-mechanisms. Co-developed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Pearson <markpearson@lenovo.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
4960821a4d |
More power management updates for 5.11-rc1
- Rework the passive-mode "fast switch" path in the intel_pstate
driver to allow it receive the minimum (required) and target
(desired) performance information from the schedutil governor so
as to avoid running some workloads too fast (Rafael Wysocki).
- Make the intel_pstate driver allow the policy max limit to be
increased after the guaranteed performance value for the given
CPU has increased (Rafael Wysocki).
- Clean up the handling of CPU coordination types in the CPPC
cpufreq driver and make it export frequency domains information
to user space via sysfs (Ionela Voinescu).
- Fix the ACPI code handling processor objects to use a correct
coordination type when it fails to map frequency domains and drop
a redundant CPU map initialization from it (Ionela Voinescu, Punit
Agrawal).
-----BEGIN PGP SIGNATURE-----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=AcdB
-----END PGP SIGNATURE-----
Merge tag 'pm-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the CPPC cpufreq driver and intel_pstate (which involves
updating the cpufreq core and the schedutil governor) and make
janitorial changes in the ACPI code handling processor objects.
Specifics:
- Rework the passive-mode "fast switch" path in the intel_pstate
driver to allow it receive the minimum (required) and target
(desired) performance information from the schedutil governor so as
to avoid running some workloads too fast (Rafael Wysocki).
- Make the intel_pstate driver allow the policy max limit to be
increased after the guaranteed performance value for the given CPU
has increased (Rafael Wysocki).
- Clean up the handling of CPU coordination types in the CPPC cpufreq
driver and make it export frequency domains information to user
space via sysfs (Ionela Voinescu).
- Fix the ACPI code handling processor objects to use a correct
coordination type when it fails to map frequency domains and drop a
redundant CPU map initialization from it (Ionela Voinescu, Punit
Agrawal)"
* tag 'pm-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Use most recent guaranteed performance values
cpufreq: intel_pstate: Implement the ->adjust_perf() callback
cpufreq: Add special-purpose fast-switching callback for drivers
cpufreq: schedutil: Add util to struct sg_cpu
cppc_cpufreq: replace per-cpu data array with a list
cppc_cpufreq: expose information on frequency domains
cppc_cpufreq: clarify support for coordination types
cppc_cpufreq: use policy->cpu as driver of frequency setting
ACPI: processor: fix NONE coordination for domain mapping failure
|
||
Rafael J. Wysocki
|
c3a74f8e25 |
Merge branch 'pm-cpufreq'
* pm-cpufreq: cpufreq: intel_pstate: Use most recent guaranteed performance values cpufreq: intel_pstate: Implement the ->adjust_perf() callback cpufreq: Add special-purpose fast-switching callback for drivers cpufreq: schedutil: Add util to struct sg_cpu cppc_cpufreq: replace per-cpu data array with a list cppc_cpufreq: expose information on frequency domains cppc_cpufreq: clarify support for coordination types cppc_cpufreq: use policy->cpu as driver of frequency setting ACPI: processor: fix NONE coordination for domain mapping failure ACPI: processor: Drop duplicate setting of shared_cpu_map |
||
|
Linus Torvalds
|
6daa90439e |
dmaengine updates for v5.11-rc1
New drivers/devices - Qualcomm ADM driver - Qualcomm GPI driver - Allwinner A100 DMA support - Microchip Sama7g5 support - Mediatek MT8516 apdma - Updates: - more updates to idxd driver and support for IAX config - runtime PM support for dw driver - TI keystone drivers for 5.11 included here due to dependency for TI drivers -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl/bkxEACgkQfBQHDyUj g0dxNA//WzpVy9QJnj6OgXIjM+9sBjqls0iPVfy1JeeMmVW8cgCwLyBNZcssKRye mJ9+VnTx4JQBj4KD2cFBdpr46GvBFbSbcWNSCdm179NtHI4G6tjtynOcWaI9Clu2 0KHoa/EHIj8/jD3Hsbm+WZ1zCoY4VKBXsEq6x1Sj2tpp0/ocDhH4XLAsWTHE9OAD sc+0OtHr1wU4EdV6TKNTT0jXsdtzxOPPsvRsoaKncnR+Mkrgv0FvMBfBLhOb3a+m wUHEkwrEP1pT4Xcew6ZkYs4RYwJI3pllu2gUTs5qtidc723ol/C4kJ27q55N4azb j5buA8AhEwqIDH8qNuV07qaIu2VTdTdbYid3xgAeFygwM1npecZvOf8k6rTjxR/6 XN8jaDuhc2uISY7Gt5c6tOe8rG3ffNhYrmEuGD5HI0hcglpALiE4NcgalaaQS9J1 suQ6AUtCslReD+6M/lfarn9Zd3UAKGbxU8vCNPq0EcSAGUz9u9VK2VwKiGnAZ8bb ED3QDUzZYjTDWpiVodsuJlONgaMLsRCQecZWMDRNpzmf1rCXnkY0eDGiSMz+IiXZ 87IdD66u3d/Mkm6jVdwp6+tKZ/ohj+dtIWKhMd8cKXv5zTzS+4IokxpkxdjBsHPx z+G73IMHjQo8xl/P0IhhwZw+7cBrkntLq8lRSbYxjSTP09QerNE= =uNBn -----END PGP SIGNATURE----- Merge tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "The last dmaengine updates for this year :) This contains couple of new drivers, new device support and updates to bunch of drivers. New drivers/devices: - Qualcomm ADM driver - Qualcomm GPI driver - Allwinner A100 DMA support - Microchip Sama7g5 support - Mediatek MT8516 apdma Updates: - more updates to idxd driver and support for IAX config - runtime PM support for dw driver - TI drivers" * tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits) soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA dmaengine: ti: k3-udma: Initial support for K3 PKTDMA dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling dmaengine: ti: k3-udma: Initial support for K3 BCDMA soc: ti: k3-ringacc: add AM64 DMA rings support. dmaengine: ti: Add support for k3 event routers dmaengine: ti: k3-psil: Add initial map for AM64 dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 BCDMA dmaengine: dmatest: Use dmaengine_get_dma_device dmaengine: doc: client: Update for dmaengine_get_dma_device() usage dmaengine: Add support for per channel coherency handling dmaengine: of-dma: Add support for optional router configuration callback dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API dmaengine: ti: k3-udma: Add support for second resource range from sysfw dmaengine: ti: k3-udma: Wait for peer teardown completion if supported ... |
||
|
Linus Torvalds
|
ff49c86f27 |
f2fs-for-5.11-rc1
In this round, we've made more work into per-file compression support. For example, F2FS_IOC_GET|SET_COMPRESS_OPTION provides a way to change the algorithm or cluster size per file. F2FS_IOC_COMPRESS|DECOMPRESS_FILE provides a way to compress and decompress the existing normal files manually along with a new mount option, compress_mode=fs|user, which can control who compresses the data. Chao also added a checksum feature with a mount option so that we are able to detect any corrupted cluster. In addition, Daniel contributed casefolding with encryption patch, which will be used for Android devices. Enhancement: - add ioctls and mount option to manage per-file compression feature - support casefolding with encryption - support checksum for compressed cluster - avoid IO starvation by replacing mutex with rwsem - add sysfs, max_io_bytes, to control max bio size Bug fix: - fix use-after-free issue when compression and fsverity are enabled - fix consistency corruption during fault injection test - fix data offset for lseek - get rid of buffer_head which has 32bits limit in fiemap - fix some bugs in multi-partitions support - fix nat entry count calculation in shrinker - fix some stat information And, we've refactored some logics and fix minor bugs as well. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAl/a8ywACgkQQBSofoJI UNLa2RAAjK+6tOs+NuYx2w9SegghKxwCg4Mb362BMdaAGx6GzMqAkCiVdujuoz/r +wy8sdqO9QE7723ZDNsebNMLRnkNPHnpneSL2p6OsSLJrD3ORTELVRrzNlkemvnK rRHZyYnNJvQQnD4uU7ABvROKsIDw/nCfcFvzHmLIgEw8EHO0W4n6fTtBdTwXv1qi N3qXhGuQldonR9XICuGjzj7wh17n9ua6Mr12XX3Ok38giMcZb9KFBwgvlhl35cxt htEmUpxWD3NTSw6zJmV4VAiajpiIkW6QRQuVA1nzdLZK644gaJMhM1EUsOnZhfDl wX0ZtKoNkXxb0glD34O3aYqeHJ3tHWgPmmpVm9TECJP9A/X7kmEHgQYpH/eJ9I7d tk51Uz28Mz1RShXU4i5RyKZeeoNTLiVlqiC95E2cnq4C1tLOJyI00N9AinrLzvR+ fqUrAwCrBpiYX63mWKYwq7GWxWwp4+PY09kyIZxxJiWhTE/St0bRx2bQL8zA8C6J Rtxl+QWyQhkFbNu8fAukLFAhC6mqX/FKpXvUqRehBnHRvMWBiVZG0//eOPQLk71u qsdCgYuEVcg3itDQrZvmsjxi4Pb5E9mNr0s5oC4I2WvBPMheD4esSyG7cKDN0qfS 3FFHlRYLOvnjPMLnKTmZXjFvFyHR8mwsD4Z83MeSrqYnWC14tFY= =KneU -----END PGP SIGNATURE----- Merge tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've made more work into per-file compression support. For example, F2FS_IOC_GET | SET_COMPRESS_OPTION provides a way to change the algorithm or cluster size per file. F2FS_IOC_COMPRESS | DECOMPRESS_FILE provides a way to compress and decompress the existing normal files manually. There is also a new mount option, compress_mode=fs|user, which can control who compresses the data. Chao also added a checksum feature with a mount option so that we are able to detect any corrupted cluster. In addition, Daniel contributed casefolding with encryption patch, which will be used for Android devices. Summary: Enhancements: - add ioctls and mount option to manage per-file compression feature - support casefolding with encryption - support checksum for compressed cluster - avoid IO starvation by replacing mutex with rwsem - add sysfs, max_io_bytes, to control max bio size Bug fixes: - fix use-after-free issue when compression and fsverity are enabled - fix consistency corruption during fault injection test - fix data offset for lseek - get rid of buffer_head which has 32bits limit in fiemap - fix some bugs in multi-partitions support - fix nat entry count calculation in shrinker - fix some stat information And, we've refactored some logics and fix minor bugs as well" * tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (36 commits) f2fs: compress: fix compression chksum f2fs: fix shift-out-of-bounds in sanity_check_raw_super() f2fs: fix race of pending_pages in decompression f2fs: fix to account inline xattr correctly during recovery f2fs: inline: fix wrong inline inode stat f2fs: inline: correct comment in f2fs_recover_inline_data f2fs: don't check PAGE_SIZE again in sanity_check_raw_super() f2fs: convert to F2FS_*_INO macro f2fs: introduce max_io_bytes, a sysfs entry, to limit bio size f2fs: don't allow any writes on readonly mount f2fs: avoid race condition for shrinker count f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE f2fs: add compress_mode mount option f2fs: Remove unnecessary unlikely() f2fs: init dirty_secmap incorrectly f2fs: remove buffer_head which has 32bits limit f2fs: fix wrong block count instead of bytes f2fs: use new conversion functions between blks and bytes f2fs: rename logical_to_blk and blk_to_logical f2fs: fix kbytes written stat for multi-device case ... |
||
|
Linus Torvalds
|
19778dd504 |
IOMMU updates for 5.11
- IOVA allocation optimisations and removal of unused code
- Introduction of DOMAIN_ATTR_IO_PGTABLE_CFG for parameterising the
page-table of an IOMMU domain
- Support for changing the default domain type in sysfs
- Optimisation to the way in which identity-mapped regions are created
- Driver updates:
* Arm SMMU updates, including continued work on Shared Virtual Memory
* Tegra SMMU updates, including support for PCI devices
* Intel VT-D updates, including conversion to the IOMMU-DMA API
- Cleanup, kerneldoc and minor refactoring
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl/XWy8QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPejB/46QsXATkWt7hbDPIxlUvzUG8VP/FBNJ6A3
/4Z+4KBXR3zhvZJOEqTarnm6Uc22tWkYpNS3QAOuRW0EfVeD8H+og4SOA2iri5tR
x3GZUCng93APWpHdDtJP7kP/xuU47JsBblY/Ip9aJKYoXi9c9svtssAqKr008wxr
knv/xv/awQ0O7CNc3gAoz7mUagQxG/no+HMXMT3Fz9KWRzzvTi6s+7ZDm2faI0hO
GEJygsKbXxe1qbfeGqKTP/67EJVqjTGsLCF2zMogbnnD7DxadJ2hP0oNg5tvldT/
oDj9YWG6oLMfIVCwDVQXuWNfKxd7RGORMbYwKNAaRSvmkli6625h
=KFOO
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull IOMMU updates from Will Deacon:
"There's a good mixture of improvements to the core code and driver
changes across the board.
One thing worth pointing out is that this includes a quirk to work
around behaviour in the i915 driver (see
|
||
|
Linus Torvalds
|
60f7c503d9 |
SCSI misc on 20201216
This series consists of the usual driver updates (ufs, qla2xxx, smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major power management rework and a load of assorted minor updates. There are a few core updates (formatting fixes being the big one) but nothing major this cycle. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX9o0KSYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbOZAP9D5NTN J7dJUo2MIMy84YBu+d9ag7yLlNiRWVY2yw5vHwD/Z7JjAVLwz/tzmyjU9//o2J6w hwhOv6Uto89gLCWSEz8= =KUPT -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major power management rework and a load of assorted minor updates. There are a few core updates (formatting fixes being the big one) but nothing major this cycle" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: mpt3sas: Update driver version to 36.100.00.00 scsi: mpt3sas: Handle trigger page after firmware update scsi: mpt3sas: Add persistent MPI trigger page scsi: mpt3sas: Add persistent SCSI sense trigger page scsi: mpt3sas: Add persistent Event trigger page scsi: mpt3sas: Add persistent Master trigger page scsi: mpt3sas: Add persistent trigger pages support scsi: mpt3sas: Sync time periodically between driver and firmware scsi: qla2xxx: Update version to 10.02.00.104-k scsi: qla2xxx: Fix device loss on 4G and older HBAs scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry scsi: qla2xxx: Fix the call trace for flush workqueue scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines scsi: qla2xxx: Handle aborts correctly for port undergoing deletion scsi: qla2xxx: Fix N2N and NVMe connect retry failure scsi: qla2xxx: Fix FW initialization error on big endian machines scsi: qla2xxx: Fix crash during driver load on big endian machines scsi: qla2xxx: Fix compilation issue in PPC systems scsi: qla2xxx: Don't check for fw_started while posting NVMe command scsi: qla2xxx: Tear down session if FW say it is down ... |
||
|
Linus Torvalds
|
69f637c335 |
for-5.11/drivers-2020-12-14
-----BEGIN PGP SIGNATURE-----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=ayp2
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Nothing major in here:
- NVMe pull request from Christoph:
- nvmet passthrough improvements (Chaitanya Kulkarni)
- fcloop error injection support (James Smart)
- read-only support for zoned namespaces without Zone Append
(Javier González)
- improve some error message (Minwoo Im)
- reject I/O to offline fabrics namespaces (Victor Gladkov)
- PCI queue allocation cleanups (Niklas Schnelle)
- remove an unused allocation in nvmet (Amit Engel)
- a Kconfig spelling fix (Colin Ian King)
- nvme_req_qid simplication (Baolin Wang)
- MD pull request from Song:
- Fix race condition in md_ioctl() (Dae R. Jeong)
- Initialize read_slot properly for raid10 (Kevin Vigor)
- Code cleanup (Pankaj Gupta)
- md-cluster resync/reshape fix (Zhao Heming)
- Move null_blk into its own directory (Damien Le Moal)
- null_blk zone and discard improvements (Damien Le Moal)
- bcache race fix (Dongsheng Yang)
- Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang,
Lutz Pogrell, Md Haris Iqbal)
- lightnvm NULL pointer deref fix (tangzhenhao)
- sr in_interrupt() removal (Sebastian Andrzej Siewior)
- FC endpoint security support for s390/dasd (Jan Höppner, Sebastian
Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included
as it made it easier for them to funnel the feature through the
block driver tree.
- Follow up fixes (Colin Ian King)"
* tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits)
block: drop dead assignments in loop_init()
sr: Remove in_interrupt() usage in sr_init_command().
sr: Switch the sector size back to 2048 if sr_read_sector() changed it.
cdrom: Reset sector_size back it is not 2048.
drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c
null_blk: Move driver into its own directory
null_blk: Allow controlling max_hw_sectors limit
null_blk: discard zones on reset
null_blk: cleanup discard handling
null_blk: Improve implicit zone close
null_blk: improve zone locking
block: Align max_hw_sectors to logical blocksize
null_blk: Fail zone append to conventional zones
null_blk: Fix zone size initialization
bcache: fix race between setting bdev state to none and new write request direct to backing
block/rnbd: fix a null pointer dereference on dev->blk_symlink_name
block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name
block/rnbd: call kobject_put in the failure path
Documentation/ABI/rnbd-srv: add document for force_close
block/rnbd-srv: close a mapped device from server side.
...
|
||
|
Linus Torvalds
|
8312f41f08 |
MIPS updates for v5.11:
- enabled GCOV - reworked setup of protection map - added support for more MSCC platforms - added sysfs boardinfo for Loongson64 - enabled KASLR for Loogson64 - added reset controller for BCM63xx - cleanups and fixes -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAl/Z6RIaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHBYtw//bKd5RI/wRgkejish0zX7 Qt6tcnPAZRPFopq/VyepNekgleM5uR8wKJ2YzBYDvyjGL2l217WTvqZG6lTLhLI6 3YJ2xDEi7g5FmecZNF4648iGJBVLu78om2SF5HtXeJaNR1L2ofnCvP+La2y5194M 4J1dxR+V8TZ61ufTEqn3KT+cUet+EAwLsPKqdk6ThlqkDfItjbVUkWG/Hc0hMu2C pyvnto0cvNDYZE1PNeOjhitWnSeuGX2KOSF3hYaPPEGh8V6tqtR1JTGKIJlN92iH LCFC7fLTt/ju12/OAnLbGqM1gpoMP7lsflbQAeNZzaBhtDZ7seq+6iXajimosQMj Vxd3+ur+3+zd/I03uKk2Tcp9Z/m6wv9tux7Rr6J8rQ/6/VCQK1btXbv30ayyYn04 pOqK0XJigyRjlp8SwDgD2uCg7iYQI10toliIipo4TvErKOVSNl/VsyedryCq64Il 6Rj6vntAp/m5s2I3hKEmCZikWC5YalsfkLFRnzKma3vc8Q8+lwWQoEoFb19V/F3E KGkjdoZhsfcGH3kHiqBc342G+9va54c8dgOKcfx0CA6NJwhogI+i4tza2ZdRMPxn Yo7VvuXYISppFYUujW5oT1m5JyPFmVRBCBAyf9kUdPQ5H8QJ0V3gXdtQuUd/NV5J OuVQljUNXTQRxqRFDIdHfXI= =0Sht -----END PGP SIGNATURE----- Merge tag 'mips_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - enable GCOV - rework setup of protection map - add support for more MSCC platforms - add sysfs boardinfo for Loongson64 - enable KASLR for Loogson64 - add reset controller for BCM63xx - cleanups and fixes * tag 'mips_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (70 commits) mips: fix Section mismatch in reference MAINTAINERS: Add linux-mips mailing list to JZ47xx entries MAINTAINERS: Remove JZ4780 DMA driver entry MAINTAINERS: chenhc@lemote.com -> chenhuacai@kernel.org MIPS: Octeon: irq: Alloc desc before configuring IRQ MIPS: mm: Add back define for PAGE_SHARED MIPS: Select ARCH_KEEP_MEMBLOCK if DEBUG_KERNEL to enable sysfs memblock debug mips: lib: uncached: fix non-standard usage of variable 'sp' MIPS: DTS: img: Fix schema warnings for pwm-leds MIPS: KASLR: Avoid endless loop in sync_icache if synci_step is zero MIPS: Move memblock_dump_all() to the end of setup_arch() MIPS: SMP-CPS: Add support for irq migration when CPU offline MIPS: OCTEON: Don't add kernel sections into memblock allocator MIPS: Don't round up kernel sections size for memblock_add() MIPS: Enable GCOV MIPS: configs: drop unused BACKLIGHT_GENERIC option MIPS: Loongson64: Fix up reserving kernel memory range MIPS: mm: Remove unused is_aligned_hugepage_range MIPS: No need to check CPU 0 in {loongson3,bmips,octeon}_cpu_disable() mips: cdmm: fix use-after-free in mips_cdmm_bus_discover ... |
||
Matteo Croce
|
2c622ed0ea |
reboot: allow to specify reboot mode via sysfs
The kernel cmdline reboot= option offers some sort of control on how the reboot is issued. We don't always know in advance what type of reboot to perform. Sometimes a warm reboot is preferred to persist certain memory regions across the reboot. Others a cold one is needed to apply a future system update that makes a memory memory model change, like changing the base page size or resizing a persistent memory region. Or simply we want to enable reboot_force because we noticed that something bad happened. Add handles in sysfs to allow setting these reboot options, so they can be changed when the system is booted, other than at boot time. The handlers are under <sysfs>/kernel/reboot, can be read to get the current configuration and written to alter it. # cd /sys/kernel/reboot/ # grep . * cpu:0 force:0 mode:cold type:acpi # echo 2 >cpu # echo yes >force # echo soft >mode # echo bios >type # grep . * cpu:2 force:1 mode:soft type:bios Before setting anything, check for CAP_SYS_BOOT capability, so it's possible to allow an unpriviledged process to change these settings simply by relaxing the handles permissions, without opening them to the world. [natechancellor@gmail.com: fix variable assignments in type_store] Link: https://lkml.kernel.org/r/20201112035023.974748-1-natechancellor@gmail.com Link: https://github.com/ClangBuiltLinux/linux/issues/1197 Link: https://lkml.kernel.org/r/20201110202746.9690-1-mcroce@linux.microsoft.com Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
489e9fea66 |
pci-v5.11-changes
-----BEGIN PGP SIGNATURE-----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=xRTv
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Decode PCIe 64 GT/s link speed (Gustavo Pimentel)
- Remove unused HAVE_PCI_SET_MWI (Heiner Kallweit)
- Reduce pci_set_cacheline_size() message to debug level (Heiner
Kallweit)
- Fix pci_slot_release() NULL pointer dereference (Jubin Zhong)
- Unify ECAM constants in native PCI Express drivers (Krzysztof
Wilczyński)
- Return u8 from pci_find_capability() and similar (Puranjay Mohan)
- Return u16 from pci_find_ext_capability() and similar (Bjorn
Helgaas)
- Fix ACPI companion lookup for device 0 on the root bus (Rafael J.
Wysocki)
Resource management:
- Keep both device and resource name for config space remaps
(Alexander Lobakin)
- Bounds-check command-line resource alignment requests (Bjorn
Helgaas)
- Fix overflow in command-line resource alignment requests (Colin Ian
King)
Driver binding:
- Avoid duplicate IDs in driver dynamic IDs list (Zhenzhong Duan)
Power management:
- Save/restore Precision Time Measurement Capability for
suspend/resume (David E. Box)
- Disable PTM during suspend to save power (David E. Box)
- Add sysfs attribute for device power state (Maximilian Luz)
- Rename pci_wakeup_bus() to pci_resume_bus() (Mika Westerberg)
- Do not generate wakeup event when runtime resuming device (Mika
Westerberg)
- Save/restore ASPM L1SS Capability for suspend/resume (Vidya Sagar)
Virtualization:
- Mark AMD Raven iGPU ATS as broken in some platforms (Alex Deucher)
- Add function 1 DMA alias quirk for Marvell 9215 SATA controller
(Bjorn Helgaas)
MSI:
- Disable MSI for Pericom PCIe-USB adapter (Andy Shevchenko)
- Improve warnings for 32-bit-limited MSI support (Vidya Sagar)
Error handling:
- Cache RCEC EA Capability offset in pci_init_capabilities() (Sean V
Kelley)
- Rename reset_link() to reset_subordinates() (Sean V Kelley)
- Write AER Capability only when we control it (Sean V Kelley)
- Clear AER status only when we control AER (Sean V Kelley)
- Bind RCEC devices to the Root Port driver (Qiuxu Zhuo)
- Recover from RCiEP AER errors (Qiuxu Zhuo)
- Recover from RCEC AER errors (Sean V Kelley)
- Add pcie_link_rcec() to associate RCiEPs (Sean V Kelley)
- Add pcie_walk_rcec() to RCEC AER handling (Sean V Kelley)
- Add pcie_walk_rcec() to RCEC PME handling (Sean V Kelley)
- Add RCEC AER error injection support (Qiuxu Zhuo)
Broadcom iProc PCIe controller driver:
- Fix out-of-bound array accesses (Bharat Gooty)
- Invalidate correct PAXB inbound windows (Roman Bacik)
- Enhance PCIe Link information display (Srinath Mannam)
Cadence PCIe controller driver:
- Make "cdns,max-outbound-regions" property optional (Kishon Vijay
Abraham I)
Intel VMD host bridge driver:
- Offset client MSI-X vectors (Jon Derrick)
- Update type of __iomem pointers (Krzysztof Wilczyński)
NVIDIA Tegra PCIe controller driver:
- Move "dbi" accesses to post common DWC initialization (Vidya Sagar)
- Read "dbi" base address to program in application logic (Vidya
Sagar)
- Fix ASPM-L1SS advertisement disable code (Vidya Sagar)
- Set DesignWare IP version (Vidya Sagar)
- Continue unconfig sequence even if parts fail (Vidya Sagar)
- Check return value of tegra_pcie_init_controller() (Vidya Sagar)
- Disable LTSSM during L2 entry (Vidya Sagar)
Qualcomm PCIe controller driver:
- Document PCIe bindings for SM8250 SoC (Manivannan Sadhasivam)
- Add SM8250 SoC support (Manivannan Sadhasivam)
- Add support for configuring BDF to SID mapping for SM8250
(Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- rcar: Drop unused members from struct rcar_pcie_host (Lad
Prabhakar)
- PCI: rcar-pci-host: Document r8a774e1 bindings (Lad Prabhakar)
- PCI: rcar-pci-host: Convert bindings to json-schema (Yoshihiro
Shimoda)
- PCI: rcar-pci-host: Document r8a77965 bindings (Yoshihiro Shimoda)
Samsung Exynos PCIe controller driver:
- Rework driver to support Exynos5433 PCIe PHY (Jaehoon Chung)
- Rework driver to support Exynos5433 variant (Jaehoon Chung)
- Drop samsung,exynos5440-pcie binding (Marek Szyprowski)
- Add the samsung,exynos-pcie binding (Marek Szyprowski)
- Add the samsung,exynos-pcie-phy binding (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Support multiple ATU memory regions (Rob Herring)
- Move intel-gw ATU offset out of driver match data (Rob Herring)
- Move "dbi", "dbi2", and "addr_space" resource setup into common
code (Rob Herring)
- Remove intel-gw unneeded function wrappers (Rob Herring)
- Ensure all outbound ATU windows are reset (Rob Herring)
- Use the common MSI irq_chip in dra7xx (Rob Herring)
- Drop the .set_num_vectors() host op (Rob Herring)
- Move MSI interrupt setup into DWC common code (Rob Herring)
- Rework MSI initialization (Rob Herring)
- Move link handling into common code (Rob Herring)
- Move dw_pcie_msi_init() into core (Rob Herring)
- Move dw_pcie_setup_rc() to DWC common code (Rob Herring)
- Remove unnecessary wrappers around dw_pcie_host_init() (Rob
Herring)
- Drop keystone duplicated 'num-viewport'" (Rob Herring)
- Move inbound and outbound windows to common struct (Rob Herring)
- Detect number of iATU windows (Rob Herring)
- Warn if non-prefetchable memory aperture size is > 32-bit (Vidya
Sagar)
- Add support to program ATU for >4GB memory (Vidya Sagar)
- Set 32-bit DMA mask for MSI target address allocation (Vidya Sagar)
TI J721E PCIe driver:
- Fix "ti,syscon-pcie-ctrl" to take argument (Kishon Vijay Abraham I)
- Add host mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham
I)
- Add EP mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham I)
- Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg
(Kishon Vijay Abraham I)
TI Keystone PCIe controller driver:
- Enable compile-testing on !ARM (Alex Dewar)"
* tag 'pci-v5.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller
PCI/ACPI: Fix companion lookup for device 0 on the root bus
PCI: Keep both device and resource name for config space remaps
PCI: xgene: Removed unused ".bus_shift" initialisers from pci-xgene.c
PCI: vmd: Update type of the __iomem pointers
PCI: iproc: Convert to use the new ECAM constants
PCI: thunder-pem: Add constant for custom ".bus_shift" initialiser
PCI: Unify ECAM constants in native PCI Express drivers
PCI: Disable PTM during suspend to save power
PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume
PCI: Mark AMD Raven iGPU ATS as broken in some platforms
PCI: j721e: Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg
dt-bindings: PCI: Add EP mode dt-bindings for TI's J7200 SoC
dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC
dt-bindings: pci: ti,j721e: Fix "ti,syscon-pcie-ctrl" to take argument
PCI: dwc: Set 32-bit DMA mask for MSI target address allocation
PCI: qcom: Add support for configuring BDF to SID mapping for SM8250
PCI: Reduce pci_set_cacheline_size() message to debug level
PCI: Remove unused HAVE_PCI_SET_MWI
PCI: qcom: Add SM8250 SoC support
...
|
||
|
Linus Torvalds
|
b4ec805464 |
Power management updates for 5.11-rc1
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from
the frequency table as the current frequency and clean up that
driver (Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle
driver (Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables
in DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it
to take the interconnect and OPP information from DT and clean it
up ((Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print
driver flags for devices with debug enabled (Alex Shi, Patrice
Chotard, Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan).
-----BEGIN PGP SIGNATURE-----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=BVdX
-----END PGP SIGNATURE-----
Merge tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update cpufreq (core and drivers), cpuidle (polling state
implementation and the PSCI driver), the OPP (operating performance
points) framework, devfreq (core and drivers), the power capping RAPL
(Running Average Power Limit) driver, the Energy Model support, the
generic power domains (genpd) framework, the ACPI device power
management, the core system-wide suspend code and power management
utilities.
Specifics:
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from the
frequency table as the current frequency and clean up that driver
(Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
(Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables in
DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it to
take the interconnect and OPP information from DT and clean it up
(Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print driver
flags for devices with debug enabled (Alex Shi, Patrice Chotard,
Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan)"
* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
cpufreq: Fix cpufreq_online() return value on errors
cpufreq: Fix up several kerneldoc comments
cpufreq: stats: Use local_clock() instead of jiffies
cpufreq: schedutil: Simplify sugov_update_next_freq()
cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
PM: domains: create debugfs nodes when adding power domains
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
PM / EM: Micro optimization in em_cpu_energy
cpufreq: arm_scmi: Discover the power scale in performance protocol
...
|
||
|
Linus Torvalds
|
61f914256c |
platform-drivers-x86 for v5.11-1
Highlights:
- New driver for changing BIOS settings from within Linux on Dell devices,
this introduces a new generic sysfs API for this. Lenovo is working on
also supporting this API on their devices
- New Intel PMT telemetry and crashlog drivers
- Support for SW_TABLET_MODE reporting for the acer-wmi and intel-hid drivers
- Preparation work for improving support for Microsoft Surface hardware
- Various fixes / improvements / quirks for the panasonic-laptop and others
The following is an automated git shortlog grouped by driver:
ISST:
- Mark mmio_range_devid_0 and mmio_range_devid_1 with static keyword
- Change PCI device macros
- Allow configurable offset range
- Check for unaligned mmio address
Intel PMT Crashlog capability driver:
- Intel PMT Crashlog capability driver
Intel PMT Telemetry capability driver:
- Intel PMT Telemetry capability driver
Intel PMT class driver:
- Intel PMT class driver
Introduce support for Systems Management Driver over WMI for Dell Systems:
- Introduce support for Systems Management Driver over WMI for Dell Systems
MAINTAINERS:
- new panasonic-laptop maintainer
- rectify DELL WMI SYSMAN DRIVERS section
Merge tag 'ib-mfd-x86-v5.11' into review-hans:
- Merge tag 'ib-mfd-x86-v5.11' into review-hans
PCI:
- Add defines for Designated Vendor-Specific Extended Capability
Revert "platform/x86:
- wmi: Destroy on cleanup rather than unregister"
acer-wireless:
- send an EV_SYN/SYN_REPORT between state changes
acer-wmi:
- Add ACER_CAP_KBD_DOCK quirk for the Aspire Switch 10E SW3-016
- add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE
- Add support for SW_TABLET_MODE on Switch devices
- Add ACER_CAP_SET_FUNCTION_MODE capability flag
- Add new force_caps module parameter
- Cleanup accelerometer device handling
- Cleanup ACER_CAP_FOO defines
- Drop no-op set_quirks call from find_quirks
amd-pmc:
- Add AMD platform support for S2Idle
asus-wmi:
- Add userspace notification for performance mode change
- Add support for SW_TABLET_MODE on UX360
dell-smbios-base:
- Fix error return code in dell_smbios_init
dell-wmi-sysman:
- work around for BIOS bug
- fix init_bios_attributes() error handling
docs:
- ABI: sysfs-class-firmware-attributes: solve some warnings
i2c-multi-instantiate:
- Use device_get_match_data() to get driver data
- Simplify with dev_err_probe()
- Drop redundant ACPI_PTR()
intel-hid:
- add Rocket Lake ACPI device ID
- Do not create SW_TABLET_MODE input-dev when a KIOX010A ACPI dev is present
- Add alternative method to enable switches
- Add support for SW_TABLET_MODE
- fix _DSM function index handling
intel-vbtn:
- Fix SW_TABLET_MODE always reporting 1 on some HP x360 models
- Allow switch events on Acer Switch Alpha 12
- Support for tablet mode on HP Pavilion 13 x360 PC
intel_pmc_core:
- Assign boolean values to a bool variable
mfd:
- Intel Platform Monitoring Technology support
mlx-platform:
- Fix item counter assignment for MSN2700/ComEx system
- Fix item counter assignment for MSN2700, MSN24xx systems
- remove an unused variable
- Remove PSU EEPROM from MSN274x platform configuration
- Remove PSU EEPROM from default platform configuration
panasonic-laptop:
- Add sysfs attributes for firmware brightness registers
- Add support for battery charging threshold (eco mode)
- Resolve hotkey double trigger bug
- Add write support to mute
- Fix sticky key init bug
- Fix naming of platform files for consistency with other modules
- Split MODULE_AUTHOR() by one author per macro call
- Replace ACPI prints with pr_*() macros
- Add support for optical driver power in Y and W series
platform:
- Add Surface platform directory
platform/mellanox:
- mlxbf-pmc: Add Mellanox BlueField PMC driver
platform/surface:
- gpe: Add support for 15" Intel version of Surface Laptop 3
- Add Driver to set up lid GPEs on MS Surface device
- Move Surface Pro 3 Button driver to platform/surface
- Move Surface 3 Power OpRegion driver to platform/surface
- Move Surface 3 Button driver to platform/surface
- Move Surface 3 WMI driver to platform/surface
platform/x86/dell-wmi-sysman:
- Make some symbols static
- Make wmi_sysman_kobj_sysfs_ops static
pmt:
- Fix a potential Oops on error in probe
remove unneeded break:
- remove unneeded break
thinkpad_acpi:
- remove trailing semicolon in macro definition
- Whitelist P15 firmware for dual fan control
- Add palm sensor support
- Send tablet mode switch at wakeup time
- Add BAT1 is primary battery quirk for Thinkpad Yoga 11e 4th gen
- Do not report SW_TABLET_MODE on Yoga 11e
- add P1 gen3 second fan support
tools/power/x86/intel-speed-select:
- Update version for v5.11
- Account for missing sysfs for die_id
- Read TRL from mailbox
toshiba_acpi:
- Fix the wrong variable assignment
touchscreen_dmi:
- Add info for the Irbis TW118 tablet
- Add info for the Predia Basic tablet
x86/platform:
- classmate-laptop: add WiFi media button
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAl/XTkEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9z5EAf7BzqZDyFBpsDd8+o0FsjCq1DEzw0R
lZdhZt65wSMqe0sndgfStPQG1yet8JgABgq8aCkBQLhj55hjiOUYHe5iXmylSRQn
iWhu2xI+qYb9rhPW3lYilGcWAIfC5jrEZHFLtpXKx/p5iwCJQRvI6sV8HwcwJjnQ
p3eyxIUEQieAtO90scqsOWZTKtT/no9UMTLbZwrO3Spv05WGopIMtkHPWYTd96pa
6SRBdhZj3mrHHc7mRe0u4Wx2dzeUwiPLfubt/kmRPoo1HWTGE2Ck4KPqN/nSY3R2
z882CMZjWpbwoc3OP2fK26uIHjTh45+yVH8DVZbaQW9BWIOdE87iADzuWA==
=Df8H
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- New driver for changing BIOS settings from within Linux on Dell
devices. This introduces a new generic sysfs API for this. Lenovo
is working on also supporting this API on their devices
- New Intel PMT telemetry and crashlog drivers
- Support for SW_TABLET_MODE reporting for the acer-wmi and intel-hid
drivers
- Preparation work for improving support for Microsoft Surface
hardware
- Various fixes / improvements / quirks for the panasonic-laptop and
others"
* tag 'platform-drivers-x86-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (81 commits)
platform/x86: ISST: Mark mmio_range_devid_0 and mmio_range_devid_1 with static keyword
platform/x86: intel-hid: add Rocket Lake ACPI device ID
x86/platform: classmate-laptop: add WiFi media button
platform/x86: mlx-platform: Fix item counter assignment for MSN2700/ComEx system
platform/x86: mlx-platform: Fix item counter assignment for MSN2700, MSN24xx systems
tools/power/x86/intel-speed-select: Update version for v5.11
tools/power/x86/intel-speed-select: Account for missing sysfs for die_id
tools/power/x86/intel-speed-select: Read TRL from mailbox
platform/x86: intel-hid: Do not create SW_TABLET_MODE input-dev when a KIOX010A ACPI dev is present
platform/x86: intel-hid: Add alternative method to enable switches
platform/x86: intel-hid: Add support for SW_TABLET_MODE
platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on some HP x360 models
platform/x86: ISST: Change PCI device macros
platform/x86: ISST: Allow configurable offset range
platform/x86: ISST: Check for unaligned mmio address
acer-wireless: send an EV_SYN/SYN_REPORT between state changes
platform/x86: dell-wmi-sysman: work around for BIOS bug
platform/x86: mlx-platform: remove an unused variable
platform/x86: thinkpad_acpi: remove trailing semicolon in macro definition
platform/x86: dell-smbios-base: Fix error return code in dell_smbios_init
...
|
||
|
Linus Torvalds
|
3db1a3fa98 |
Staging / IIO driver patches for 5.11-rc1
Here is the big staging and IIO driver pull request for 5.11-rc1 Lots of different things in here: - loads of driver updates - so many coding style cleanups - new IIO drivers - Android ION code is finally removed from the tree - wimax drivers are moved to staging on their way out of the kernel Nothing really exciting, just the constant grind of kernel development :) All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX9iCdw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yn44QCguVCsIkhxYmnuTAkrPQP74CbJoJwAoLVoPM5K LJRbMYjGfRc4gZehlrIV =clR4 -----END PGP SIGNATURE----- Merge tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver updates from Greg KH: "Here is the big staging and IIO driver pull request for 5.11-rc1 Lots of different things in here: - loads of driver updates - so many coding style cleanups - new IIO drivers - Android ION code is finally removed from the tree - wimax drivers are moved to staging on their way out of the kernel Nothing really exciting, just the constant grind of kernel development :) All have been in linux-next for a while with no reported issues" * tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits) staging: olpc_dcon: Do not call platform_device_unregister() in dcon_probe() staging: most: Fix spelling mistake "tranceiver" -> "transceiver" staging: qlge: remove duplicate word in comment staging: comedi: mf6x4: Fix AI end-of-conversion detection staging: greybus: Add TODO item about modernizing the pwm code pinctrl: ralink: add a pinctrl driver for the rt2880 family dt-bindings: pinctrl: rt2880: add binding document staging: rtl8723bs: remove ELEMENT_ID enum staging: rtl8723bs: remove unused macros staging: rtl8723bs: replace EID_EXTCapability staging: rtl8723bs: replace EID_BSSIntolerantChlReport staging: rtl8723bs: replace EID_BSSCoexistence staging: rtl8723bs: replace _MME_IE_ staging: rtl8723bs: replace _WAPI_IE_ staging: rtl8723bs: replace _EXT_SUPPORTEDRATES_IE_ staging: rtl8723bs: replace _ERPINFO_IE_ staging: rtl8723bs: replace _CHLGETXT_IE_ staging: rtl8723bs: replace _COUNTRY_IE_ staging: rtl8723bs: replace _IBSS_PARA_IE_ staging: rtl8723bs: replace _TIM_IE_ ... |
||
|
Linus Torvalds
|
2911ed9f47 |
Char / Misc driver updates for 5.11-rc1
Here is the big char/misc driver update for 5.11-rc1. Continuing the tradition of previous -rc1 pulls, there seems to be more and more tiny driver subsystems flowing through this tree. Lots of different things, all of which have been in linux-next for a while with no reported issues: - extcon driver updates - habannalab driver updates - mei driver updates - uio driver updates - binder fixes and features added - soundwire driver updates - mhi bus driver updates - phy driver updates - coresight driver updates - fpga driver updates - speakup driver updates - slimbus driver updates - various small char and misc driver updates Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX9iDZA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylRMACgqxKS2CUcY8tPnR5weHEsbz6O+KAAn3BtEFnK 7V9EnSuZe4L1jNOHOB5V =xzHh -----END PGP SIGNATURE----- Merge tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big char/misc driver update for 5.11-rc1. Continuing the tradition of previous -rc1 pulls, there seems to be more and more tiny driver subsystems flowing through this tree. Lots of different things, all of which have been in linux-next for a while with no reported issues: - extcon driver updates - habannalab driver updates - mei driver updates - uio driver updates - binder fixes and features added - soundwire driver updates - mhi bus driver updates - phy driver updates - coresight driver updates - fpga driver updates - speakup driver updates - slimbus driver updates - various small char and misc driver updates" * tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits) extcon: max77693: Fix modalias string extcon: fsa9480: Support TI TSU6111 variant extcon: fsa9480: Rewrite bindings in YAML and extend dt-bindings: extcon: add binding for TUSB320 extcon: Add driver for TI TUSB320 slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew() siox: Make remove callback return void siox: Use bus_type functions for probe, remove and shutdown spmi: Add driver shutdown support spmi: fix some coding style issues at the spmi core spmi: get rid of a warning when built with W=1 uio: uio_hv_generic: use devm_kzalloc() for private data alloc uio: uio_fsl_elbc_gpcm: use device-managed allocators uio: uio_aec: use devm_kzalloc() for uio_info object uio: uio_cif: use devm_kzalloc() for uio_info object uio: uio_netx: use devm_kzalloc() for or uio_info object uio: uio_mf624: use devm_kzalloc() for uio_info object uio: uio_sercos3: use device-managed functions for simple allocs uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers uio: uio_dmem_genirq: convert simple allocations to device-managed ... |
||
|
Linus Torvalds
|
0cee54c890 |
USB / Thunderbolt patches for 5.11-rc1
Here is the big USB and thunderbolt pull request for 5.11-rc1. Nothing major in here, just the grind of constant development to support new hardware and fix old issues: - thunderbolt updates for new USB4 hardware - cdns3 major driver updates - lots of typec updates and additions as more hardware is available - usb serial driver updates and fixes - other tiny USB driver updates All have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX9iKFQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yme2gCfacEYztlnc0fh7PyyatYXgdkspbYAn2ri6mfF 4VY86HYXKqQRDW8w/lSg =f8KJ -----END PGP SIGNATURE----- Merge tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big USB and thunderbolt pull request for 5.11-rc1. Nothing major in here, just the grind of constant development to support new hardware and fix old issues: - thunderbolt updates for new USB4 hardware - cdns3 major driver updates - lots of typec updates and additions as more hardware is available - usb serial driver updates and fixes - other tiny USB driver updates All have been in linux-next with no reported issues" * tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: phy: convert comma to semicolon usb: ucsi: convert comma to semicolon usb: typec: tcpm: convert comma to semicolon usb: typec: tcpm: Update vbus_vsafe0v on init usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled usb: typec: Add class for plug alt mode device USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP USB: typec: tcpm: Fix PR_SWAP error handling USB: typec: tcpm: Hard Reset after not receiving a Request USB: gadget: f_fs: remove likely/unlikely usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus USB: gadget: f_midi: setup SuperSpeed Plus descriptors USB: gadget: f_acm: add support for SuperSpeed Plus USB: gadget: f_rndis: fix bitrate for SuperSpeed and above usb: typec: intel_pmc_mux: Configure cable generation value for USB4 MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data() usb: chipidea: usbmisc_imx: Use of_device_get_match_data() usb: cdns3: fix NULL pointer dereference on no platform data ... |
||
|
Linus Torvalds
|
d635a69dd4 |
Networking updates for 5.11
Core:
- support "prefer busy polling" NAPI operation mode, where we defer softirq
for some time expecting applications to periodically busy poll
- AF_XDP: improve efficiency by more batching and hindering
the adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or unaligned
reads making zero copy a performance win for much smaller messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined in
IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which
also allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to
a central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GXs1
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
|
||
Ionela Voinescu
|
cfdc589f4b |
cppc_cpufreq: expose information on frequency domains
Use the existing sysfs attribute "freqdomain_cpus" to expose information to userspace about CPUs in the same frequency domain. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
ff6135959a |
A much quieter cycle for documentation (happily), with, one hopes, the bulk
of the churn behind us. Significant stuff in this pull includes:
- A set of new Chinese translations
- Italian translation updates
- A mechanism from Mauro to automatically format Documentation/features
for the built docs
- Automatic cross references without explicit :ref: markup
- A new reset-controller document
- An extensive new document on reporting problems from Thorsten
That last patch also adds the CC-BY-4.0 license to LICENSES/dual; there was
some discussion on this, but we seem to have consensus and an ack from Greg
for that addition.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl/XyewPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YUeYH/AiNNlVIF/80T45TAkm+1kpy2Fb+d/5wbtGK
PB7OTXPyDmmqwZNldlF9IsRhp5W+wYC3PNlulYMG44hT7/Jqf2CMFw8SOZqGLmBV
LhWwoS+TAWLB19IOOMrVXbhAlNsX01NwBDY/dwONjW1Jcu+tuAsBR47T9lKjw4kJ
qGFGMQTvZG9Ig1x7E6X38mAd7W3SD1viNuUePS2YcoB15GAocWfVVHvu1r+RHUTS
27ET8tWzMMuiaCAD6toVY9L4T7iCI7YSPXQm8BOkf/f4LXDnpo8Fo11LE5ozTAh3
+avnNt8vnrRXc06MnzwsvNHm2TqN97B4shkeDiPAV3ySXI8Zu/w=
=HScX
-----END PGP SIGNATURE-----
Merge tag 'docs-5.11' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A much quieter cycle for documentation (happily), with, one hopes, the
bulk of the churn behind us. Significant stuff in this pull includes:
- A set of new Chinese translations
- Italian translation updates
- A mechanism from Mauro to automatically format
Documentation/features for the built docs
- Automatic cross references without explicit :ref: markup
- A new reset-controller document
- An extensive new document on reporting problems from Thorsten
That last patch also adds the CC-BY-4.0 license to LICENSES/dual;
there was some discussion on this, but we seem to have consensus and
an ack from Greg for that addition"
* tag 'docs-5.11' of git://git.lwn.net/linux: (50 commits)
docs: fix broken cross reference in translations/zh_CN
docs: Note that sphinx 1.7 will be required soon
docs: update requirements to install six module
docs: reporting-issues: move 'outdated, need help' note to proper place
docs: Update documentation to reflect what TAINT_CPU_OUT_OF_SPEC means
docs: add a reset controller chapter to the driver API docs
docs: make reporting-bugs.rst obsolete
docs: Add a new text describing how to report bugs
LICENSES: Add the CC-BY-4.0 license
Documentation: fix multiple typos found in the admin-guide subdirectory
Documentation: fix typos found in admin-guide subdirectory
kernel-doc: Fix example in Nested structs/unions
docs: clean up sysctl/kernel: titles, version
docs: trace: fix event state structure name
docs: nios2: add missing ReST file
scripts: get_feat.pl: reduce table width for all features output
scripts: get_feat.pl: change the group by order
scripts: get_feat.pl: make complete table more coincise
scripts: kernel-doc: fix parsing function-like typedefs
Documentation: fix typos found in process, dev-tools, and doc-guide subdirectories
...
|
||
|
Rafael J. Wysocki
|
d3569c149d |
Update devfreq for 5.11
Detailed description for this pull request:
1. Update devfreq core
- Add new devfreq_frequency tracepoint to show the frequency change
information.
- Add governor feature flag. The devfreq governor is able to
have the specific flag in order to contain the non-common feature.
For example, if governor contains the 'immutable' feature, don't allow
user to change the governor via sysfs.
- Add governor sysfs attribute flag for each sysfs file. Prior to that
devfreq subsystem show the all sysfs files regardless of governor type.
But, some sysfs fils are not supported on the specific devfreq governor.
In order to show the only supported sysfs files according to the governor,
clarify the access permission of sysfs attributes according to governor.
When adding the devfreq governor, can specify the available attribute
information by using DEVFREQ_GOV_ATTR_* constant variable. The user can
read or write the sysfs attributes in accordance to the specified attributes.
- Clean-up the code to remove the duplicate code for the devfreq tracepoint
and to remove redundant governor_name field from struct devfreq
2. Update exynos-bus.c devfreq driver
- Add interconnect API support for the Samsung Exynos Bus Frequency driver
of exynos-bus.c. Complementing the devfreq driver with an interconnect
functionality allows to ensure the QoS requirements of devices accessing
the system memory (e.g. video processing devices) are fulfilled
and allows to avoid issues like the DMA underrun.
3. Update tegra devfreq driver
- Add interconnect support and OPP interface for tegra30-devfreq.c.
Also, it is to guarantee the QoS requirement of some devices like
display controller.
- Move tegra20-devfreq.c from drivers/devfreq/ into driver/memory/tegra/
in order to use the more proper monitoring feature such as EMC_STAT
which is based in driver/memory/tegra/.
- Separate the configuration information for different SoC on
tegra30-devfrqe.c. The tegra30-devfreq.c had been supported both
tegra30-actmon and tegra124-actmon devices. In order to use
the more correct configuration data, separate them.
- Use dev_err_probe() to handle the deferred probe error on tegra30-devfreq.c.
4. Pull the request of 'Tegra SoC and clock controller changes for v5.11'
sent by Krzysztof Kozlowski <krzk@kernel.org> in order to prevent the
build error.
-----BEGIN PGP SIGNATURE-----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=t1gj
-----END PGP SIGNATURE-----
Merge tag 'devfreq-next-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq updates for 5.11 from Chanwoo Choi:
1. Update devfreq core
- Add new devfreq_frequency tracepoint to show the frequency change
information.
- Add governor feature flag. The devfreq governor is able to set the
specific flag in order to support a non-common feature. For
example, if the governor supports the 'immutable' feature, don't
allow user space to change the governor via sysfs.
- Add governor sysfs attribute flag for each sysfs file. Prior to that
the devfreq subsystem allowed all of the sysfs files to be accessed
regardless of the governor type. But some sysfs fils are not
supported by specific devfreq governors. In order to only allow the
sysfs files supported by the governor to be accessed, clarify the
access permissions of sysfs attributes according to the governor.
When adding the devfreq governor, specify the available attribute
information by using DEVFREQ_GOV_ATTR_* symbols. The user can read
or write the sysfs attributes in accordance to the specified
access permissions.
- Clean-up the code to reduce duplication for the devfreq tracepoint
and to remove redundant governor_name field from struct devfreq.
2. Update exynos-bus.c devfreq driver
- Add interconnect API support to the Samsung Exynos Bus Frequency
driver, exynos-bus.c. Complementing the devfreq driver with
interconnect functionality allows to ensure that the QoS
requirements regarding devices accessing the system memory (e.g.
video processing devices) will be met and allows to avoid issues
like DMA underrun.
3. Update tegra devfreq driver
- Add interconnect support and OPP interface to tegra30-devfreq.c.
Also, it is to guarantee the QoS requirement of some devices like
the display controller.
- Move tegra20-devfreq.c from drivers/devfreq/ into drivers/memory/tegra/
in order to use the more proper monitoring feature such as EMC_STAT
which is located in drivers/memory/tegra/.
- Separate the configuration information for different SoCs in
tegra30-devfrqe.c. The tegra30-devfreq.c had been supporting both
tegra30-actmon and tegra124-actmon devices. In order to use the
more correct configuration data, separate them.
- Use dev_err_probe() to handle the deferred probe error in
tegra30-devfreq.c.
4. Pull the request of 'Tegra SoC and clock controller changes for
v5.11' sent by Krzysztof Kozlowski <krzk@kernel.org> in order to
avoid a build error."
* tag 'devfreq-next-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: tegra30: Separate configurations per-SoC generation
PM / devfreq: tegra30: Support interconnect and OPPs from device-tree
PM / devfreq: tegra20: Deprecate in a favor of emc-stat based driver
PM / devfreq: exynos-bus: Add registration of interconnect child device
dt-bindings: devfreq: Add documentation for the interconnect properties
soc/tegra: fuse: Add stub for tegra_sku_info
soc/tegra: fuse: Export tegra_read_ram_code()
clk: tegra: Export Tegra20 EMC kernel symbols
PM / devfreq: tegra30: Silence deferred probe error
PM / devfreq: tegra20: Relax Kconfig dependency
PM / devfreq: tegra20: Silence deferred probe error
PM / devfreq: Remove redundant governor_name from struct devfreq
PM / devfreq: Add governor attribute flag for specifc sysfs nodes
PM / devfreq: Add governor feature flag
PM / devfreq: Add tracepoint for frequency changes
PM / devfreq: Unify frequency change to devfreq_update_target func
trace: events: devfreq: Use fixed indentation size to improve readability
|
||
Dave Jiang
|
92de5fa2dc |
dmaengine: idxd: add ATS disable knob for work queues
With the DSA spec 1.1 update, a knob to disable ATS for individually is introduced. Add enabling code to allow a system admin to make the configuration through sysfs. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/160530810593.1288392.2561048329116529566.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Greg Kroah-Hartman
|
3d41137801 |
thunderbolt: Changes for v5.11 merge window
This includes following Thunderbolt/USB4 changes for v5.11 merge window:
* DMA traffic test driver
* USB4 router NVM upgrade improvements
* USB4 router operations proxy implementation available in the recent
Intel Connection Manager firmwares
* Support for Intel Maple Ridge discrete Thunderbolt 4 controller
* A couple of cleanups and minor improvements.
-----BEGIN PGP SIGNATURE-----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=+RXF
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.11 merge window
This includes following Thunderbolt/USB4 changes for v5.11 merge window:
* DMA traffic test driver
* USB4 router NVM upgrade improvements
* USB4 router operations proxy implementation available in the recent
Intel Connection Manager firmwares
* Support for Intel Maple Ridge discrete Thunderbolt 4 controller
* A couple of cleanups and minor improvements.
* tag 'thunderbolt-for-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (22 commits)
thunderbolt: Add support for Intel Maple Ridge
thunderbolt: Add USB4 router operation proxy for firmware connection manager
thunderbolt: Move constants for USB4 router operations to tb_regs.h
thunderbolt: Add connection manager specific hooks for USB4 router operations
thunderbolt: Pass TX and RX data directly to usb4_switch_op()
thunderbolt: Pass metadata directly to usb4_switch_op()
thunderbolt: Perform USB4 router NVM upgrade in two phases
thunderbolt: Return -ENOTCONN when ERR_CONN is received
thunderbolt: Keep the parent runtime resumed for a while on device disconnect
thunderbolt: Log adapter numbers in decimal in path activation/deactivation
thunderbolt: Log which connection manager implementation is used
thunderbolt: Move max_boot_acl field to correct place in struct icm
MAINTAINERS: Add Isaac as maintainer of Thunderbolt DMA traffic test driver
thunderbolt: Add DMA traffic test driver
thunderbolt: Add support for end-to-end flow control
thunderbolt: Make it possible to allocate one directional DMA tunnel
thunderbolt: Create debugfs directory automatically for services
thunderbolt: Add functions for enabling and disabling lane bonding on XDomain
thunderbolt: Add link_speed and link_width to XDomain
thunderbolt: Create XDomain devices for loops back to the host
...
|
||
Mike Travis
|
c9624cb7db |
x86/platform/uv: Update sysfs documentation
Update sysfs documentation file to include moved /proc leaves. Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lkml.kernel.org/r/20201128034227.120869-6-mike.travis@hpe.com |
||
Jaegeuk Kim
|
10208567f1 |
f2fs: introduce max_io_bytes, a sysfs entry, to limit bio size
This patch adds max_io_bytes to limit bio size when f2fs tries to merge consecutive IOs. This can give a testing point to split out bios and check end_io handles those bios correctly. This is used to capture a recent bug on the decompression and fsverity flow. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
Jakub Kicinski
|
78d6bb584d |
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- update include for min/max helpers, by Sven Eckelmann
- add infrastructure and netlink functions for routing algo selection,
by Sven Eckelmann (2 patches)
- drop deprecated debugfs and sysfs support and obsoleted
functionality, by Sven Eckelmann (3 patches)
- drop unused include in fragmentation.c, by Simon Wunderlich
-----BEGIN PGP SIGNATURE-----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=tNKF
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20201204' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- update include for min/max helpers, by Sven Eckelmann
- add infrastructure and netlink functions for routing algo selection,
by Sven Eckelmann (2 patches)
- drop deprecated debugfs and sysfs support and obsoleted
functionality, by Sven Eckelmann (3 patches)
- drop unused include in fragmentation.c, by Simon Wunderlich
* tag 'batadv-next-pullrequest-20201204' of git://git.open-mesh.org/linux-merge:
batman-adv: Drop unused soft-interface.h include in fragmentation.c
batman-adv: Drop legacy code for auto deleting mesh interfaces
batman-adv: Drop deprecated debugfs support
batman-adv: Drop deprecated sysfs support
batman-adv: Allow selection of routing algorithm over rtnetlink
batman-adv: Prepare infrastructure for newlink settings
batman-adv: Add new include for min/max helpers
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20201204154631.21063-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
Maximilian Luz
|
80a129afb7 |
PCI: Add sysfs attribute for device power state
While PCI power states D0-D3hot can be queried from user-space via lspci, D3cold cannot. lspci cannot provide an accurate value when the device is in D3cold as it has to restore the device to D0 before it can access its power state via the configuration space, leading to it reporting D0 or another on-state. Thus lspci cannot be used to diagnose power consumption issues for devices that can enter D3cold or to ensure that devices properly enter D3cold at all. Add a new sysfs device attribute for the PCI power state, showing the current power state as seen by the kernel. [bhelgaas: drop READ_ONCE(), see discussion at the link] Link: https://lore.kernel.org/r/20201102141520.831630-1-luzmaximilian@gmail.com Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Jack Wang
|
765c5c56ff |
Documentation/ABI/rnbd-srv: add document for force_close
describe force_close of device Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Gioh Kim
|
7578d5cd1e |
Documentation/ABI/rnbd-clt: session name is appended to the device path
When mapping a device, /sys/devices/virtual/rnbd-client/ctl/devices/<device_id> was created. But we found out that it had a problem when mapping the same file on different servers. So we append the session name after the device_id as below. /sys/devices/virtual/rnbd-client/ctl/devices/<device_id>@<session_name> Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Gioh Kim
|
47479b7954 |
Documentation/ABI/rnbd-clt: fix typo in sysfs-class-rnbd-client
/sys/block/rnbd<N> is created, not /sys/block/rnbd_client/rnbd<N> Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Sven Eckelmann
|
76e9f27628 |
batman-adv: Drop deprecated sysfs support
The sysfs in batman-adv support was marked as deprecated by the commit
|
||
Justin Ernst
|
c159376490 |
x86/platform/uv: Update ABI documentation of /sys/firmware/sgi_uv/
Update the ABI documentation to describe the sysfs interface provided by the new uv_sysfs platform driver. [ bp: Merge in kernel-doc warning fixes, see second Link: below. ] Signed-off-by: Justin Ernst <justin.ernst@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lkml.kernel.org/r/20201125175444.279074-5-justin.ernst@hpe.com Link: https://lkml.kernel.org/r/20201130214304.369348-1-justin.ernst@hpe.com |
||
|
Greg Kroah-Hartman
|
3473065927 |
Merge 5.10-rc6 into char-misc-next
We need the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
ebad43260d |
Merge 5.10-rc6 into usb-next
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jakub Kicinski
|
5c39f26e67 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Heikki Krogerus
|
ab37fa851c |
usb: typec: Add type sysfs attribute file for partners
USB Power Delivery Specification defines a set of product types for partners and cables. The product type can be read from the ID Header VDO which is the first object in the response to the Discover Identity command. This attribute will display the product type of the partner. The cables already have the attribute. This sysfs attribute file is only created for the partners and cables if the product type is really known in the driver. Some interfaces do not give access to the Discover Identity response from the partner or cable, but they may still supply the product type separately in some cases. When the product type of the partner or cable is detected, uevent is also raised with PRODUCT_TYPE set to show the actual product type (for example PRODUCT_TYPE=host). Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201126115735.50529-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Lu Baolu
|
62c9917d9c |
iommu: Fix htmldocs warnings in sysfs-kernel-iommu_groups
Below warnings are fixed:
Documentation/ABI/testing/sysfs-kernel-iommu_groups:38: WARNING: Unexpected indentation.
Documentation/ABI/testing/sysfs-kernel-iommu_groups:38: WARNING: Block quote ends without a blank line; unexpected unindent.
Documentation/ABI/testing/sysfs-kernel-iommu_groups:38: WARNING: Enumerated list ends without a blank line; unexpected unindent.
Documentation/ABI/testing/sysfs-kernel-iommu_groups:38: WARNING: Unexpected indentation.
Documentation/ABI/testing/sysfs-kernel-iommu_groups:38: WARNING: Block quote ends without a blank line; unexpected unindent.
Fixes:
|
||
Prashant Malani
|
2e70c495ca |
usb: typec: Expose Product Type VDOs via sysfs
A PD-capable device can return up to 3 Product Type VDOs as part of its DiscoverIdentity Response (USB PD Spec, Rev 3.0, Version 2.0, Section 6.4.4.3.1). Add sysfs attributes to expose these to userspace. Cc: Benson Leung <bleung@chromium.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20201125084911.1077462-2-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Prashant Malani
|
fd2c35b2f5 |
usb: typec: Consolidate sysfs ABI documentation
Both partner and cable have identity VDOs. These are listed separately in the Documentation/ABI/testing/sysfs-class-typec. Factor these out into a common location to avoid the duplication. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20201125084911.1077462-1-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Sai Praneeth Prakhya
|
63a816749d |
iommu: Document usage of "/sys/kernel/iommu_groups/<grp_id>/type" file
The default domain type of an iommu group can be changed by writing to "/sys/kernel/iommu_groups/<grp_id>/type" file. Hence, document it's usage and more importantly spell out its limitations. Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Link: https://lore.kernel.org/r/20201124130604.2912899-5-baolu.lu@linux.intel.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Greg Kroah-Hartman
|
749c1e1481 |
First set of new device support, features and cleanups for IIO in the 5.11 cycle
Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.
Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).
Listed by manufacturer
- dht11 temperature(drop)
- adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
adi,adis16480 adi,adf4350
- ams,as3935
- asahi-kasei,ak8974
- atmel,sama5d2-adc
- avago,apds9300 avago,apds9960
- bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
- brcm,iproc-static-adc
- capella,cm36651
- domintech,dmard06(drop)
- fsl,mag3110 fsl,mma8452 fsl,vf610-dac
- hoperf,hp03
- honeywell,hmc5843
- kionix,kxcjk1013
- maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
maxim,max31856 maxim,max31855k maxim,max44009
maxim,max5481 maxim,max5821
- meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
- mediatek,mt2701-auxadc
- melexis,mlx90614 melexis,mlx90632
- memsic,mmc35240(drop)
- microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
- murata,zap2326
- nxp,fxas21002c nxp,lpc1850-dac
- pni,rm3100
- qcom,pm8018-adc qcom,spmi-iadc
- renesas,isl29501 renesas,rcar-gyroadc
- samsung,sensorhub-rinato
- sensiron,sgp30
- sentech,sx9500
- sharp,gp2ap020a00f
- st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
- ti,adc084s021 ti,ads124s08
ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
- upisemi,us51882
- vishay,vcnl4035
- x-powers,axp209
New device support
* adi,ad5685
- Add support for AD5338R dual output 10-bit DAC
- Add DT-binding doc.
* mediatek,mt6360
- New driver for this SoC ADC with bindings and using new channel label
support in the IIO core.
* st,lsm6dsx
- Add support for LSM6DST
Core:
* Add "label" to device channels, provided via a new core callback. Including
DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup
Features
* semtech,sx9310
- Add control of hardware gain, proximity thresholds, hysteresis and
debounce.
- Increase what information on hardware configuration can be provided
via DT.
Cleanup and minor features
* adi,ad5685
- Add of_match_table
* adi,ad7292
- Drop pointless spi_set_drvdata() call
* adi,ad7298
- Drop platform data and tidy up external reference config.
* adi,ad7303
- Drop platform data handling as unused.
* adi,ad7768
- Add new label attribute for channels provided from dt.
* adi,ad7887
- devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
- Drop pointless spi_set_drvdata() call
* adi,adis16209
- Drop pointless spi_set_drvdata() call
* adi,adis16240
- White space fixup
* adi,adxl372
- use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
- Drop pointless semicolon.
* amstaos,tsl2563
- Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
- Use of_device_get_match_data() instead of open coding it.
- Constify some driver data
- Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
- Drop platform data as mostly dead code.
- Tidy up reference voltage logic
* atmel-sama5d2
- Drop a pointless semicolon
- Merge buffer and trigger init into a separate function
- Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
- Drop a pointless semicolon
* bosch,bmc150
- Drop a pointless semicolon
- Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
- Drop a pointless semicolon
* fsl,mma8452
- Constification
* (google),cros_ec
- Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
- Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
- Drop a pointless semicolon
* invensense,icm426xx
- Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
- Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
- Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
- Stop relying on users counter form input device in ISR.
* st,lsm6dsx
- add vdd and vddio regulator control (including binding update)
* st,stm32-adc
- Tidy up code for dma transfers.
- Adapt clock duty cycle for proper functioning. Note no known problems
with existing boards.
* st,vl53l0x-i2c
- Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
- Put back i2c_device_id table as needed for greybus probing.
-----BEGIN PGP SIGNATURE-----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=kkcj
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 5.11 cycle
Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.
Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).
Listed by manufacturer
- dht11 temperature(drop)
- adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
adi,adis16480 adi,adf4350
- ams,as3935
- asahi-kasei,ak8974
- atmel,sama5d2-adc
- avago,apds9300 avago,apds9960
- bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
- brcm,iproc-static-adc
- capella,cm36651
- domintech,dmard06(drop)
- fsl,mag3110 fsl,mma8452 fsl,vf610-dac
- hoperf,hp03
- honeywell,hmc5843
- kionix,kxcjk1013
- maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
maxim,max31856 maxim,max31855k maxim,max44009
maxim,max5481 maxim,max5821
- meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
- mediatek,mt2701-auxadc
- melexis,mlx90614 melexis,mlx90632
- memsic,mmc35240(drop)
- microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
- murata,zap2326
- nxp,fxas21002c nxp,lpc1850-dac
- pni,rm3100
- qcom,pm8018-adc qcom,spmi-iadc
- renesas,isl29501 renesas,rcar-gyroadc
- samsung,sensorhub-rinato
- sensiron,sgp30
- sentech,sx9500
- sharp,gp2ap020a00f
- st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
- ti,adc084s021 ti,ads124s08
ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
- upisemi,us51882
- vishay,vcnl4035
- x-powers,axp209
New device support
* adi,ad5685
- Add support for AD5338R dual output 10-bit DAC
- Add DT-binding doc.
* mediatek,mt6360
- New driver for this SoC ADC with bindings and using new channel label
support in the IIO core.
* st,lsm6dsx
- Add support for LSM6DST
Core:
* Add "label" to device channels, provided via a new core callback. Including
DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup
Features
* semtech,sx9310
- Add control of hardware gain, proximity thresholds, hysteresis and
debounce.
- Increase what information on hardware configuration can be provided
via DT.
Cleanup and minor features
* adi,ad5685
- Add of_match_table
* adi,ad7292
- Drop pointless spi_set_drvdata() call
* adi,ad7298
- Drop platform data and tidy up external reference config.
* adi,ad7303
- Drop platform data handling as unused.
* adi,ad7768
- Add new label attribute for channels provided from dt.
* adi,ad7887
- devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
- Drop pointless spi_set_drvdata() call
* adi,adis16209
- Drop pointless spi_set_drvdata() call
* adi,adis16240
- White space fixup
* adi,adxl372
- use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
- Drop pointless semicolon.
* amstaos,tsl2563
- Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
- Use of_device_get_match_data() instead of open coding it.
- Constify some driver data
- Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
- Drop platform data as mostly dead code.
- Tidy up reference voltage logic
* atmel-sama5d2
- Drop a pointless semicolon
- Merge buffer and trigger init into a separate function
- Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
- Drop a pointless semicolon
* bosch,bmc150
- Drop a pointless semicolon
- Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
- Drop a pointless semicolon
* fsl,mma8452
- Constification
* (google),cros_ec
- Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
- Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
- Drop a pointless semicolon
* invensense,icm426xx
- Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
- Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
- Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
- Stop relying on users counter form input device in ISR.
* st,lsm6dsx
- add vdd and vddio regulator control (including binding update)
* st,stm32-adc
- Tidy up code for dma transfers.
- Adapt clock duty cycle for proper functioning. Note no known problems
with existing boards.
* st,vl53l0x-i2c
- Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
- Put back i2c_device_id table as needed for greybus probing.
* tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.
dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion
dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion.
dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion
dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion.
dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion
dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion
dt-bindings:iio:light:st,vl6180: txt to yaml format conversion.
dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion
dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor
dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion.
dt-bindings:iio:light:ti,opt3001: txt to yaml conversion
dt-bindings:iio:light:maxim,max44009: txt to yaml conversion.
dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion.
dt-bindings:iio:light:capella,cm36651: txt to yaml conversion.
dt-bindings:iio:light:avago,apds9960: txt to yaml conversion
dt-bindings:iio:light:avago,apds9300: txt to yaml conversion.
dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion
dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion
...
|
||
|
Linus Torvalds
|
d27637ece8 |
Staging/IIO fixes for 5.10-rc5
Here are some small Staging and IIO driver fixes for 5.10-rc5. They include: - IIO fixes for reported regressions and problems - new device ids for IIO drivers - new device id for rtl8723bs driver - staging ralink driver Kconfig dependency fix - staging mt7621-pci bus resource fix All of these have been in linux-next all week with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX7pN0A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymnAACgrCPVrnWr2mblmLhBWYpq3LjLri0AoIsYd7FG 138ClPlHDOjNTzKQaF5Q =YLIp -----END PGP SIGNATURE----- Merge tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO fixes from Greg KH: "Here are some small Staging and IIO driver fixes for 5.10-rc5. They include: - IIO fixes for reported regressions and problems - new device ids for IIO drivers - new device id for rtl8723bs driver - staging ralink driver Kconfig dependency fix - staging mt7621-pci bus resource fix All of these have been in linux-next all week with no reported issues" * tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum docs: ABI: testing: iio: stm32: remove re-introduced unsupported ABI iio: light: fix kconfig dependency bug for VCNL4035 iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is used iio/adc: ingenic: Fix battery VREF for JZ4770 SoC staging: rtl8723bs: Add 024c:0627 to the list of SDIO device-ids staging: ralink-gdma: fix kconfig dependency bug for DMA_RALINK staging: mt7621-pci: avoid to request pci bus resources iio: imu: st_lsm6dsx: set 10ms as min shub slave timeout counter/ti-eqep: Fix regmap max_register iio: adc: stm32-adc: fix a regression when using dma and irq iio: adc: mediatek: fix unset field iio: cros_ec: Use default frequencies when EC returns invalid information |
||
|
Prashant Malani
|
e1e52361c6 |
usb: typec: Add plug num_altmodes sysfs attr
Add a field to the typec_plug struct to record the number of available altmodes as well as the corresponding sysfs attribute to expose this to userspace. This allows userspace to determine whether there are any remaining alternate modes left to be registered by the kernel driver. It can begin executing any policy state machine after all available alternate modes have been registered with the connector class framework. This value is set to "-1" initially, signifying that a valid number of alternate modes haven't been set for the plug. The sysfs file remains hidden as long as the attribute value is -1. We re-use the partner attribute for number_of_alternate_modes since the usage and name is similar, and update the corresponding *_show() command to support both partner and plugs. Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201116201150.2919178-4-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Prashant Malani
|
a0ccdc4a77 |
usb: typec: Add number of altmodes partner attr
Add a user-visible attribute for the number of alternate modes available in a partner. This allows userspace to determine whether there are any remaining alternate modes left to be registered by the kernel driver. It can begin executing any policy state machine after all available alternate modes have been registered with the connector class framework. This value is set to "-1" initially, signifying that a valid number of alternate modes haven't been set for the partner. Also add a sysfs file which exposes this attribute. The file remains hidden as long as the attribute value is -1. Cc: Benson Leung <bleung@chromium.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201116201150.2919178-3-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
93c69b2d17 |
Merge 5.10-rc4 into char-misc-next
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jakub Kicinski
|
07cbce2e46 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-11-14 1) Add BTF generation for kernel modules and extend BTF infra in kernel e.g. support for split BTF loading and validation, from Andrii Nakryiko. 2) Support for pointers beyond pkt_end to recognize LLVM generated patterns on inlined branch conditions, from Alexei Starovoitov. 3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh. 4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage infra, from Martin KaFai Lau. 5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the XDP_REDIRECT path, from Lorenzo Bianconi. 6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI context, from Song Liu. 7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build for different target archs on same source tree, from Jean-Philippe Brucker. 8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet. 9) Move functionality from test_tcpbpf_user into the test_progs framework so it can run in BPF CI, from Alexander Duyck. 10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner. Note that for the fix from Song we have seen a sparse report on context imbalance which requires changes in sparse itself for proper annotation detection where this is currently being discussed on linux-sparse among developers [0]. Once we have more clarification/guidance after their fix, Song will follow-up. [0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/ https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/ * git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits) net: mlx5: Add xdp tx return bulking support net: mvpp2: Add xdp tx return bulking support net: mvneta: Add xdp tx return bulking support net: page_pool: Add bulk support for ptr_ring net: xdp: Introduce bulking for xdp tx return path bpf: Expose bpf_d_path helper to sleepable LSM hooks bpf: Augment the set of sleepable LSM hooks bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Rename some functions in bpf_sk_storage bpf: Folding omem_charge() into sk_storage_charge() selftests/bpf: Add asm tests for pkt vs pkt_end comparison. selftests/bpf: Add skb_pkt_end test bpf: Support for pointers beyond pkt_end. tools/bpf: Always run the *-clean recipes tools/bpf: Add bootstrap/ to .gitignore bpf: Fix NULL dereference in bpf_task_storage tools/bpftool: Fix build slowdown tools/runqslower: Build bpftool using HOSTCC tools/runqslower: Enable out-of-tree build ... ==================== Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Geert Uytterhoeven
|
4ec0b09249 |
docs: ABI: Drop trailing whitespace
Remove all trailing whitespace from the ABI documentation. Most of it was introduced during recent updates. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201110144033.3278499-1-geert+renesas@glider.be Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
Casey Schaufler
|
bfe7bf3114 |
docs: ABI: ABI documentation for procfs attribute files used by multiple LSMs
Provide basic ABI descriptions for the process attribute entries that are shared between multiple Linux security modules. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Link: https://lore.kernel.org/r/30c36660-3694-0c0d-d472-8f3b3ca4098e@schaufler-ca.com Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
Fabrice Gasnier
|
18db36a073 |
docs: ABI: testing: iio: stm32: remove re-introduced unsupported ABI
Remove unsupported ABI that has been re-introduced due to a rebase hunk. This ABI has been moved in the past in commit |
||
Ivan Zaentsev
|
439e8f6f1e |
w1: w1_therm: Rename conflicting sysfs attribute 'eeprom' to 'eeprom_cmd'
Duplicate attribute 'eeprom' is defined in: 1) Documentation/ABI/testing/sysfs-driver-w1_therm 2) Documentation/ABI/stable/sysfs-driver-w1_ds28e04 Both drivers define an attribute: /sys/bus/w1/devices/.../eeprom with conflicting behavior. Fix by renaming the newer one in w1_therm.c to 'eeprom_cmd'. Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/lkml/20201029152845.6bbb39ce@coco.lan/ Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Link: https://lore.kernel.org/r/20201112064931.8471-1-ivan.zaentsev@wirenboard.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Isaac Hazan
|
4210d50f0b |
thunderbolt: Add link_speed and link_width to XDomain
Link speed and link width are needed for checking expected values in case of using a loopback service. Signed-off-by: Isaac Hazan <isaac.hazan@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Andrii Nakryiko
|
36e68442d1 |
bpf: Load and verify kernel module BTFs
Add kernel module listener that will load/validate and unload module BTF. Module BTFs gets ID generated for them, which makes it possible to iterate them with existing BTF iteration API. They are given their respective module's names, which will get reported through GET_OBJ_INFO API. They are also marked as in-kernel BTFs for tooling to distinguish them from user-provided BTFs. Also, similarly to vmlinux BTF, kernel module BTFs are exposed through sysfs as /sys/kernel/btf/<module-name>. This is convenient for user-space tools to inspect module BTF contents and dump their types with existing tools: [vmuser@archvm bpf]$ ls -la /sys/kernel/btf total 0 drwxr-xr-x 2 root root 0 Nov 4 19:46 . drwxr-xr-x 13 root root 0 Nov 4 19:46 .. ... -r--r--r-- 1 root root 888 Nov 4 19:46 irqbypass -r--r--r-- 1 root root 100225 Nov 4 19:46 kvm -r--r--r-- 1 root root 35401 Nov 4 19:46 kvm_intel -r--r--r-- 1 root root 120 Nov 4 19:46 pcspkr -r--r--r-- 1 root root 399 Nov 4 19:46 serio_raw -r--r--r-- 1 root root 4094095 Nov 4 19:46 vmlinux Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/bpf/20201110011932.3201430-5-andrii@kernel.org |
||
Hans de Goede
|
91de32fe6d |
Immutable branch between MFD and x86 due for the v5.11 merge window
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl+ijTcACgkQUa+KL4f8 d2E+3w//Q6gB4sQ0wrhrs+R04sP9FTj/A1XFGMitIFhESsEClcvIKzB2Qh/ZjEk4 tHObkjIbA1FYaZdxq0MKw1kBbH400CIe3GO1Bkla2E4hONTx2bqJWqPmp099Yibl dMUijTSdefRrVMGUXTmSVftIPvv1lxDmc7YfmD+Y6E/MLgA9wqjXo+eOfbW6S8x/ SoSqK86WGNJpGCaUuK1diZ/3MkZG7/PT13HKxU5cGAkXTpSjPREB9IVdxEVHLo7q lvOzx3FGajWqEhDhswUZqSq7hGlH9NxbM456fBu3KbUvurXjPsotBeLmu2/5+2SW XBrEKT31a3On3KG7FZe/F3wg85etJkVHx7C1qycAAfKRbcwu9F9Z1g0VrbwDfTDq mkWHbzT3qXd50gTGXpCSUeDDTLBVXP65eZUHCdyUOIDUUphx8PIlsyPsqfy0hUxe SEMlCfAmQ5owlBT2EGC/6v4pENJn0IjJFMl+KJsPraIyjqS5ftfcr07BjTM65h+w Znq3gbKYKT//xODLCkvG6NDYpvr6LsqWYPoRHKg0Gd6FvgKKjl/Bfkq9ZmeFDint v2qKBfB+PtGKnKhnHmI5sseaUhsxy44jQ72wmI0InSwMoEj5pZFqs0EXfJyu/YJl q/gu9h3u+cJWc1D41LqrOIUeyjW2/K512cKf7tAU1QpceYumgQs= =l+RW -----END PGP SIGNATURE----- Merge tag 'ib-mfd-x86-v5.11' into review-hans Immutable branch between MFD and x86 due for the v5.11 merge window |
||
Gene Chen
|
d4686c52a2 |
Documentation: ABI: testing: mt6360: Add ADC sysfs guideline
Add ABI documentation for mt6360 ADC sysfs interfaces. Signed-off-by: Gene Chen <gene_chen@richtek.com> Link: https://lore.kernel.org/r/1603181267-15610-3-git-send-email-gene.chen.richtek@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Cristian Pop
|
3079188f82 |
iio:Documentation: Add documentation for label channel attribute
If a label is defined for this channel add that to the channel specific attributes. This is useful for userspace to be able to identify an individual channel. Signed-off-by: Cristian Pop <cristian.pop@analog.com> Link: https://lore.kernel.org/r/20200928090959.88842-2-cristian.pop@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Alexander Duyck
|
5ef9998c96 |
platform/x86: Intel PMT Crashlog capability driver
Add support for the Intel Platform Monitoring Technology crashlog interface. This interface provides a few sysfs values to allow for controlling the crashlog telemetry interface as well as a character driver to allow for mapping the crashlog memory region so that it can be accessed after a crashlog has been recorded. This driver is meant to only support the server version of the crashlog which is identified as crash_type 1 with a version of zero. Currently no other types are supported. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Alexander Duyck
|
e2729113ce |
platform/x86: Intel PMT class driver
Intel Platform Monitoring Technology is meant to provide a common way to access telemetry and system metrics. Register mappings are not provided by the driver. Instead, a GUID is read from a header for each endpoint. The GUID identifies the device and is to be used with an XML, provided by the vendor, to discover the available set of metrics and their register mapping. This allows firmware updates to modify the register space without needing to update the driver every time with new mappings. Firmware writes a new GUID in this case to specify the new mapping. Software tools with access to the associated XML file can then interpret the changes. The module manages access to all Intel PMT endpoints on a system, independent of the device exporting them. It creates an intel_pmt class to manage the devices. For each telemetry endpoint, sysfs files provide GUID and size information as well as a pointer to the parent device the telemetry came from. Software may discover the association between endpoints and devices by iterating through the list in sysfs, or by looking for the existence of the class folder under the device of interest. A binary sysfs attribute of the same name allows software to then read or map the telemetry space for direct access. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Mauro Carvalho Chehab
|
5b09081f4c |
docs: ABI: sysfs-class-firmware-attributes: solve some warnings
The Description: tag is missing on some places, causing scripts/get_abi.pl warnings: Warning: file Documentation/ABI/testing/sysfs-class-firmware-attributes#172: What '/sys/class/firmware-attributes/*/authentication/' doesn't have a description Also, some warnings are produced when generating html documentation: .../Documentation/ABI/testing/sysfs-class-firmware-attributes:2: WARNING: Title underline too short. Dell specific class extensions -------------------------- .../Documentation/ABI/testing/sysfs-class-firmware-attributes:2: WARNING: Unexpected indentation. .../Documentation/ABI/testing/sysfs-class-firmware-attributes:2: WARNING: Unexpected indentation. .../Documentation/ABI/testing/sysfs-class-firmware-attributes:2: WARNING: Block quote ends without a blank line; unexpected unindent. .../Documentation/ABI/testing/sysfs-class-firmware-attributes:173: WARNING: Unexpected indentation. .../Documentation/ABI/testing/sysfs-class-firmware-attributes:173: WARNING: Unexpected indentation. .../Documentation/ABI/testing/sysfs-class-firmware-attributes:173: WARNING: Block quote ends without a blank line; unexpected unindent. .../Documentation/ABI/testing/sysfs-class-firmware-attributes:111: WARNING: Inline emphasis start-string without end-string. Address the warnings, making it to produce the expected output for the documentation ABI. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/44b4181b4f772fcc5ec676e72b295c10df35121b.1603963862.git.mchehab+huawei@kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Mauro Carvalho Chehab
|
1088ee2230 |
docs: ABI: sysfs-class-net: fix a typo
clas->class Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/4bba2a1592df5a9435c8d4757a9abf20246e2a99.1604312590.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
92ca318e11 |
docs: ABI: sysfs-driver-dma-ioatdma: what starts with /sys
This is the only file where the /sys doesn't start with a /. So, rename them to: sys -> /sys Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/f4c53fff9696a61ff0e144fee237a9527982626d.1604312590.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
26a0755304 |
docs: ABI: sysfs-class-led-trigger-pattern: remove hw_pattern duplication
The ABI files are supposed to be unique. Yet, in the specific case of hw_pattern, there are some duplicated entries as warned by scripts/get_abi.pl: Warning: /sys/class/leds/<led>/hw_pattern is defined 3 times: Documentation/ABI/testing/sysfs-class-led-trigger-pattern:14 Documentation/ABI/testing/sysfs-class-led-driver-sc27xx:0 Documentation/ABI/testing/sysfs-class-led-driver-el15203000:0 Drop the duplication from the ABI files, moving the specific definitions to files inside Documentation/leds. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/038e57881550550b298e598f8f9b7f20515cbe15.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
bd6e8441c2 |
docs: ABI: sysfs-class-backlight: unify ABI documentation
Both adp8860 and adp8870 define some extensions to the backlight class. This causes warnings: Warning: /sys/class/backlight/<backlight>/ambient_light_level is defined 2 times: /sys/class/backlight/<backlight>/ambient_light_level:8 /sys/class/backlight/<backlight>/ambient_light_level:30 Warning: /sys/class/backlight/<backlight>/ambient_light_zone is defined 2 times: /sys/class/backlight/<backlight>/ambient_light_zone:18 /sys/class/backlight/<backlight>/ambient_light_zone:40 As ABI definitions shouldn't be duplicated. Unfortunately, the ABI is dependent on the specific device features. As such, ambient_light_level range is somewhat different among the supported devices. The ambient_light_zone is even worse: the meanings of each preset are different, and there's no ABI to retrieve the supported types nor their meanins. Unfortunately, it is too late to fix it without causing regressions, as this has been used since Kernel v2.6.35. Rewrite those ABI documentation using the current documentation as a reference, and double-checking at the datasheets: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP8870.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/ADP8860.pdf in order to properly document the differences between those two drivers. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/342195ad5a819d9bcfcebc133c77ab69b4211672.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
1b3023ef54 |
docs: ABI: sysfs-c2port: remove a duplicated entry
As warned by scripts/get_abi.pl:
Warning: /sys/class/c2port/c2portX/flash_erase is defined 2 times: Documentation/ABI/testing/sysfs-c2port:60 Documentation/ABI/testing/sysfs-c2port:68
This entry was added twice at the same patch. Probalby a
cut-and paste issue.
Fixes:
|
||
|
Mauro Carvalho Chehab
|
9e0b29adfb |
docs: ABI: sysfs-class-power: unify duplicated properties
The ABI is not supposed to have duplicated entries, as warned by get_abi.pl: $ ./scripts/get_abi.pl validate 2>&1|grep sysfs-class-power Warning: /sys/class/power_supply/<supply_name>/current_avg is defined 2 times: Documentation/ABI/testing/sysfs-class-power:108 Documentation/ABI/testing/sysfs-class-power:391 Warning: /sys/class/power_supply/<supply_name>/current_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:121 Documentation/ABI/testing/sysfs-class-power:404 Warning: /sys/class/power_supply/<supply_name>/current_now is defined 2 times: Documentation/ABI/testing/sysfs-class-power:130 Documentation/ABI/testing/sysfs-class-power:414 Warning: /sys/class/power_supply/<supply_name>/temp is defined 2 times: Documentation/ABI/testing/sysfs-class-power:281 Documentation/ABI/testing/sysfs-class-power:493 Warning: /sys/class/power_supply/<supply_name>/temp_alert_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:291 Documentation/ABI/testing/sysfs-class-power:505 Warning: /sys/class/power_supply/<supply_name>/temp_alert_min is defined 2 times: Documentation/ABI/testing/sysfs-class-power:306 Documentation/ABI/testing/sysfs-class-power:521 Warning: /sys/class/power_supply/<supply_name>/temp_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:322 Documentation/ABI/testing/sysfs-class-power:537 Warning: /sys/class/power_supply/<supply_name>/temp_min is defined 2 times: Documentation/ABI/testing/sysfs-class-power:333 Documentation/ABI/testing/sysfs-class-power:547 Warning: /sys/class/power_supply/<supply_name>/voltage_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:356 Documentation/ABI/testing/sysfs-class-power:571 Warning: /sys/class/power_supply/<supply_name>/voltage_min is defined 2 times: Documentation/ABI/testing/sysfs-class-power:367 Documentation/ABI/testing/sysfs-class-power:581 Warning: /sys/class/power_supply/<supply_name>/voltage_now is defined 2 times: Documentation/ABI/testing/sysfs-class-power:378 Documentation/ABI/testing/sysfs-class-power:591 Yet, both USB and Battery share a common set of charging-related properties. Unify the entries for such properties in order to avoid duplication, while preserving the battery and USB-specific data properly documented. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/bcdf5f76326ea48a990a7cac612af216c387537d.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
edef2fa297 |
docs: ABI: unify /sys/class/leds/<led>/brightness documentation
This ABI is defined twice, one for normal leds and another one for multicolor ones. Ensure that just one definition is there at ABI. Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/1115022e7f172b19ee8610f2ad28cc2f0ca93592.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
637ae1fb5d |
docs: ABI: stable: remove a duplicated documentation
Perhaps due to a wrong cut-and-paste, this entry:
What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/cpu
was added twice by the same patch, one following the other.
Remove the duplication.
Fixes:
|
||
|
Mauro Carvalho Chehab
|
4119f0dfbd |
docs: ABI: change read/write attributes
Unfortunately, (R) and (W) are valid markups for enumerated lists, as described at: https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#enumerated-lists So, we ned to replace them by: (R) -> (Read) (W) -> (Write) As otherwise, (R) will be displayed as R., with is not what it is desired. There's no need to touch (RO) and (RW). Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/6e81ad8064f3ed4f8dc265086fdf1c618043f935.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
54a19b4d3f |
docs: ABI: cleanup several ABI documents
There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
ed8c39d439 |
docs: ABI: sysfs-bus-nvdimm: use the right format for ABI
This ABI is not following the format described at ABI/README. Use it, filling in the blanks with the git log that added it, and using the current e-mail from Dan. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/9ec379cbf6dcf65ce3039c3671baf7bcaea532f4.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
97f26cab45 |
docs: ABI: vdso: use the right format for ABI
This ABI is not following the format described at ABI/README. Use it, filling in the blanks with the git log that added it, and using the current e-mail from Andy. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/28c7cf3a71e15fb7499b70ec8f38c2efaaf4add2.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
002a9c2f99 |
docs: ABI: fix syntax to be parsed using ReST notation
There are a number of new changes at the ABI files that cause them to produce warnings when generating ABI output. Fix them. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/55a89f423cf122982c462d257722e44d6ece4b36.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
b1faa368bb |
docs: ABI: convert testing/configfs-acpi to ReST
There are some problems with this file when a ReST content is produced. Fix it. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/f56daf94b80f1051438e8c787ba04552adb66e67.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
7832dea738 |
docs: ABI: don't escape ReST-incompatible chars from obsolete and removed
With just a single fix, the contents there can be parsed properly without the need to escape any ReST incompatible stuff. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/472f4574b6aa2ff4de5a819db1a4a5c9a34f5168.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
906e4af935 |
docs: ABI: sysfs-uevent: make it compatible with ReST output
- Replace " by ``, in order to use monospaced fonts; - mark literal blocks as such. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/63904cc9b6a8581c5fc2ea1dca5d925874c67372.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
3443333284 |
docs: ABI: testing: make the files compatible with ReST output
Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
98913408c5 |
docs: ABI: stable: make files ReST compatible
Several entries at the stable ABI files won't parse if we pass them directly to the ReST output. Adjust them, in order to allow adding their contents as-is at the stable ABI book. Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/467a0dfbcdf00db710a629d3fe4a2563750339d8.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
c7e45ea429 |
docs: ABI: README: specify that files should be ReST compatible
As we plan to remove the escaping code from the scripts/get_abi.pl, specify at the ABI README file that the content of the file should be ReST compatible. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/178a997070debd1953ba7d302c375948501d6193.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Dave Jiang
|
4749f51ddd |
dmaengine: idxd: Add ABI documentation for shared wq
Add the sysfs attribute bits in ABI/stable for shared wq support. Signed-off-by: Jing Lin <jing.lin@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/160382008649.3911367.10851752182908509837.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
Divya Bharathi
|
e8a60aa740 |
platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems
The Dell WMI Systems Management Driver provides a sysfs interface for systems management to enable BIOS configuration capability on certain Dell Systems. This driver allows user to configure Dell systems with a uniform common interface. To facilitate this, the patch introduces a generic way for driver to be able to create configurable BIOS Attributes available in Setup (F2) screen. Cc: Hans de Goede <hdegoede@redhat.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: mark gross <mgross@linux.intel.com> Co-developed-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Co-developed-by: Prasanth KSR <prasanth.ksr@dell.com> Signed-off-by: Prasanth KSR <prasanth.ksr@dell.com> Signed-off-by: Divya Bharathi <divya.bharathi@dell.com> Link: https://lore.kernel.org/r/20201027134944.316730-1-divya.bharathi@dell.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
Tiezhu Yang
|
673a8c4f85 |
Documentation: ABI: Add /sys/firmware/lefi/boardinfo description for Loongson64
Add a description for /sys/firmware/lefi/boardinfo on the Loongson platform. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
Shyam Sundar
|
434ee42519 |
scsi: fc: Update documentation of sysfs nodes for FPIN stats
Update documentation for sysfs nodes within:
/sys/class/fc_host
/sys/class/fc_remote_ports
Link: https://lore.kernel.org/r/20201021092715.22669-6-njavali@marvell.com
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
||
Chanwoo Choi
|
5f1a9066fc |
PM / devfreq: Add governor attribute flag for specifc sysfs nodes
DEVFREQ supports the default governors like performance, simple_ondemand and
also allows the devfreq driver to add their own governor like tegra30-devfreq.c
according to their requirement. In result, some sysfs attributes are useful
or not useful. Prior to that the user can access all sysfs attributes
regardless of the available attributes.
So, clarify the access permission of sysfs attributes according to governor.
When adding the devfreq governor, can specify the available attribute
information by using DEVFREQ_GOV_ATTR_* constant variable. The user can
read or write the sysfs attributes in accordance to the specified attributes.
When adding the governor, can add the following attributes
according to the governor feature.
[Definition for speific sysfs attributes]
- DEVFREQ_GOV_ATTR_POLLING_INTERVAL to update polling interval for timer.
: /sys/class/devfreq/[devfreq dev name]/polling_interval
- DEVFREQ_GOV_ATTR_TIMER to change the type of timer on either deferrable
or dealyed timer.
: /sys/class/devfreq/[devfreq dev name]/timer
And all devfreq governors have to support the following common attributes.
The common attributes are added to devfreq class by default.
- governor
- available_governors
- available_frequencies
- cur_freq
- target_freq
- min_freq
- max_freq
- trans_stat
[Table of governor attribute flags for devfreq governors]
------------------------------------------------------------------------------
| simple | perfor | power | user | passive | tegra30
| ondemand | mance | save | space| |
------------------------------------------------------------------------------
governor | O | O | O | O | O | O
available_governors | O | O | O | O | O | O
available_frequencies | O | O | O | O | O | O
cur_freq | O | O | O | O | O | O
target_freq | O | O | O | O | O | O
min_freq | O | O | O | O | O | O
max_freq | O | O | O | O | O | O
trans_stat | O | O | O | O | O | O
--------------------------------------------------------
polling_interval | O | X | X | X | X | O
timer | O | X | X | X | X | X
------------------------------------------------------------------------------
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
||
|
Linus Torvalds
|
bd6aabc7ca |
xen: branch for v5.10-rc1c
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX5VVeQAKCRCAXGG7T9hj voI0AQD3ol/EN9uHW1qKduBI/nl5tgv325Zri8CMu60kS45pgAD/ccUXRcHojs3l YIfgcgT4qKQFWzv57Fc9FUBQJMahJgM= =6ZgH -----END PGP SIGNATURE----- Merge tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - a series for the Xen pv block drivers adding module parameters for better control of resource usge - a cleanup series for the Xen event driver * tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Documentation: add xen.fifo_events kernel parameter description xen/events: unmask a fifo event channel only if it was masked xen/events: only register debug interrupt for 2-level events xen/events: make struct irq_info private to events_base.c xen: remove no longer used functions xen-blkfront: Apply changed parameter name to the document xen-blkfront: add a parameter for disabling of persistent grants xen-blkback: add a parameter for disabling of persistent grants |
||
|
Linus Torvalds
|
1553d96854 |
remoteproc updates for v5.10
This introduces support for the Mediatek MT9182 SCP and controlling the Cortex R5F processors found in TI K3 platforms. It clones the longstanding debugfs interface for controlling crash handling to sysfs. Lastly it solves a bug where after a warm reset of Qualcomm platforms the modem would crash upon first boot. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl+Rsv8bHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FWPYQAN8X/Y+PT29BhLDRIbGv T9BceEIM2j936eovEzKIwwgbAb1sb62F71Q9Ksi9BWHzBslGlv79aia6ilekc3N1 O+SjZ6G/bKLWtWc+GOkXRbSe0FOHnJRSEgj5Uugz3fVxPxl2IQfxn6gp557SMG38 HbrrvDelzJrtavsUCF0GvMrHZ5JUaWNxRF2xlMLehB431G5ah3hdPIrcClDcF8BG TWuXPtjQbnVTV6hoCsnO747YQDmo6nkR5ASJ/WZ+5YHUKG8aQSWepEanWasYZJQ6 i/i6rUHhuMEVVeJ4m6dis5Zi08lLuHYnSXrtPc76quBT+9sW1El64CdWR0p4wUoQ dki+i0aMqaD6CS9yoytEKG7mmdmw/ROHD/hq9sJY8yL3mkWyXLGoWBkPIFi636bI dpE+q5/PjbuiKkhXQndPURbv4eQWKpZ2RlGBXMu82MxLxqnM/0nVabvY972kepni yx8rN+MecqNpN+UHES+8m91M8eFvFm7HH7K6KU3LY8FGQ5WOJMFcV8OPTCbfeGy4 GmlhYhRx9D2wcb4M+jEL+4nzQoxzqbueUAylBbalDppsDVQVB/NddlTSZLclkhtT nmR4/mSXNArVtB7gh0/0LCcHtL1E0SHpVTa0kNdZDSK6qWVG8MR3N7sPtIW84bFl 7BPIvEs5YNsBL+8FcXzU9TMI =FhqD -----END PGP SIGNATURE----- Merge tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This introduces support for the Mediatek MT9182 SCP and controlling the Cortex R5F processors found in TI K3 platforms. It clones the longstanding debugfs interface for controlling crash handling to sysfs. Lastly it solves a bug where after a warm reset of Qualcomm platforms the modem would crash upon first boot" * tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: remoteproc/mediatek: Remove non-standard dsb() remoteproc: Add recovery configuration to the sysfs interface remoteproc: Add coredump as part of sysfs interface remoteproc: Change default dump configuration to "disabled" remoteproc: k3-r5: Add loading support for on-chip SRAM regions remoteproc: k3-r5: Initialize TCM memories for ECC remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs remoteproc/mediatek: Add support for mt8192 SCP remoteproc: Fixup coredump debugfs disable request remoteproc: qcom_q6v5: Assign mpss region to Q6 before MBA boot remoteproc/mediatek: fix null pointer dereference on null scp pointer remoteproc: stm32: Fix pointer assignement remoteproc: scp: add COMPILE_TEST dependency |
||
SeongJae Park
|
4553350ffe |
xen-blkfront: Apply changed parameter name to the document
Commit
|
||
|
SeongJae Park
|
74a852479c |
xen-blkfront: add a parameter for disabling of persistent grants
Persistent grants feature provides high scalability. On some small systems, however, it could incur data copy overheads[1] and thus it is required to be disabled. It can be disabled from blkback side using a module parameter, 'feature_persistent'. But, it is impossible from blkfront side. For the reason, this commit adds a blkfront module parameter for disabling of the feature. [1] https://wiki.xen.org/wiki/Xen_4.3_Block_Protocol_Scalability Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20200923061841.20531-3-sjpark@amazon.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> |
||
|
SeongJae Park
|
aac8a70db2 |
xen-blkback: add a parameter for disabling of persistent grants
Persistent grants feature provides high scalability. On some small systems, however, it could incur data copy overheads[1] and thus it is required to be disabled. But, there is no option to disable it. For the reason, this commit adds a module parameter for disabling of the feature. [1] https://wiki.xen.org/wiki/Xen_4.3_Block_Protocol_Scalability Signed-off-by: Anthony Liguori <aliguori@amazon.com> Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20200923061841.20531-2-sjpark@amazon.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> |
||
|
Linus Torvalds
|
38525c6919 |
power supply and reset changes for the v5.10 series
power-supply core: * Add wireless type * Properly document current direction battery/charger driver changes: * New fuel-gauge/charger driver for RN5T618/RN5T619 * New charger driver for BQ25980, BQ25975 and BQ25960 * bq27xxx-battery: add support for TI bq34z100 * gpio-charger: convert to GPIO descriptors * gpio-charger: add optional support for charge current limiting * max17040: add support for max17041, max17043, max17044 * max17040: add support for max17048, max17049, max17058, max17059 * smb347-charger: add DT support * smb247-charger: add SMB345 and SMB358 support * simple-battery: add temperature properties * lots of minor fixes, cleanups and DT binding YAML conversions reset drivers: * ocelot: Add support for Sparx5 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAl+IsXoACgkQ2O7X88g7 +prL8RAAprDcwF5irflM2bWwzKnfuNgTjk6P/o9gIWiSJsNA1R3XKJEm6l38givV EhnceGaZXgWg8blh3htd5Z6DNEEFX5ucB9KtQESW5ehM/KGvcEwD7CJilSJejqt4 3AQiFQLa41s4tnBBao/9gp+juSsvwg2NoeCaOa1H2K5oVi7WDmnmQyexa6CAty7b D4Uz8EOfpVi9FvYalffGP7QkA5ZsNWSLRRLJshHCw6QH54+h51F5efhu5S5qxXEA L/yjfFFhiB99df7y4LzvCItfaTGLcLNFfCas4+0yOWnViXosIr9rQk51FihXaDot DBCyF6hHWFDCnymnjMjWclYeatPFw+jnPrjmn+b0mQ/RaTgz30tgvuZurepcCwN/ ZKZftnvN16VAnUYgrE397F706sBZHjE6NonWvpXExawNUznA4h2uTu1bwWhtp5Um gcIjhL0ePEMf1yAYW3iI/l70NfIgPoEep6w+8oyLgV4vvffkKxkHkndoV7ZcS79M OdKbgGq4ZBNTS8ABsjHDO0o+/vBuKa3KE3/2J+916G3mc8FM6WJBfo1mIuwD51GA ASwG4UlE1Kyu91z4rP15GGMwSho7UKvWORB5ECsmfZ8xjiJSRHJAiDhmiaSaZZi0 dc5JKVDdM056IWOuP8THEVG6r3BiG/B1i8eY4YJ6GPv82JP/iks= =QtfI -----END PGP SIGNATURE----- Merge tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - add wireless type - properly document current direction Battery/charger driver changes: - new fuel-gauge/charger driver for RN5T618/RN5T619 - new charger driver for BQ25980, BQ25975 and BQ25960 - bq27xxx-battery: add support for TI bq34z100 - gpio-charger: convert to GPIO descriptors - gpio-charger: add optional support for charge current limiting - max17040: add support for max17041, max17043, max17044 - max17040: add support for max17048, max17049, max17058, max17059 - smb347-charger: add DT support - smb247-charger: add SMB345 and SMB358 support - simple-battery: add temperature properties - lots of minor fixes, cleanups and DT binding YAML conversions Reset drivers: - ocelot: Add support for Sparx5" * tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (81 commits) power: reset: POWER_RESET_OCELOT_RESET should depend on Ocelot or Sparx5 power: supply: bq25980: Fix uninitialized wd_reg_val and overrun power: supply: ltc2941: Fix ptr to enum cast power: supply: test-power: revise parameter printing to use sprintf power: supply: charger-manager: fix incorrect check on charging_duration_ms power: supply: max17040: Fix ptr to enum cast power: supply: bq25980: Fix uninitialized wd_reg_val power: supply: bq25980: remove redundant zero check on ret power: reset: ocelot: Add support for Sparx5 dt-bindings: reset: ocelot: Add Sparx5 support power: supply: sbs-battery: keep error code when get_property() fails power: supply: bq25980: Add support for the BQ259xx family dt-binding: bq25980: Add the bq25980 flash charger power: supply: fix spelling mistake "unprecise" -> "imprecise" power: supply: test_power: add missing newlines when printing parameters by sysfs power: supply: pm2301: drop duplicated i2c_device_id power: supply: charger-manager: drop unused charger assignment power: supply: rt9455: skip 'struct acpi_device_id' when !CONFIG_ACPI power: supply: goldfish: skip 'struct acpi_device_id' when !CONFIG_ACPI power: supply: bq25890: skip 'struct acpi_device_id' when !CONFIG_ACPI ... |
||
|
Linus Torvalds
|
a1e16bc7d5 |
RDMA 5.10 pull request
The typical set of driver updates across the subsystem:
- Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma, hns,
usnic, qib, qedr, cxgb4, hns, bnxt_re
- Various rtrs fixes and updates
- Bug fix for mlx4 CM emulation for virtualization scenarios where MRA
wasn't working right
- Use tracepoints instead of pr_debug in the CM code
- Scrub the locking in ucma and cma to close more syzkaller bugs
- Use tasklet_setup in the subsystem
- Revert the idea that 'destroy' operations are not allowed to fail at
the driver level. This proved unworkable from a HW perspective.
- Revise how the umem API works so drivers make fewer mistakes using it
- XRC support for qedr
- Convert uverbs objects RWQ and MW to new the allocation scheme
- Large queue entry sizes for hns
- Use hmm_range_fault() for mlx5 On Demand Paging
- uverbs APIs to inspect the GID table instead of sysfs
- Move some of the RDMA code for building large page SGLs into
lib/scatterlist
-----BEGIN PGP SIGNATURE-----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=LKpl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A usual cycle for RDMA with a typical mix of driver and core subsystem
updates:
- Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma,
hns, usnic, qib, qedr, cxgb4, hns, bnxt_re
- Various rtrs fixes and updates
- Bug fix for mlx4 CM emulation for virtualization scenarios where
MRA wasn't working right
- Use tracepoints instead of pr_debug in the CM code
- Scrub the locking in ucma and cma to close more syzkaller bugs
- Use tasklet_setup in the subsystem
- Revert the idea that 'destroy' operations are not allowed to fail
at the driver level. This proved unworkable from a HW perspective.
- Revise how the umem API works so drivers make fewer mistakes using
it
- XRC support for qedr
- Convert uverbs objects RWQ and MW to new the allocation scheme
- Large queue entry sizes for hns
- Use hmm_range_fault() for mlx5 On Demand Paging
- uverbs APIs to inspect the GID table instead of sysfs
- Move some of the RDMA code for building large page SGLs into
lib/scatterlist"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (191 commits)
RDMA/ucma: Fix use after free in destroy id flow
RDMA/rxe: Handle skb_clone() failure in rxe_recv.c
RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI
RDMA: Explicitly pass in the dma_device to ib_register_device
lib/scatterlist: Do not limit max_segment to PAGE_ALIGNED values
IB/mlx4: Convert rej_tmout radix-tree to XArray
RDMA/rxe: Fix bug rejecting all multicast packets
RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()
RDMA/rxe: Remove duplicate entries in struct rxe_mr
IB/hfi,rdmavt,qib,opa_vnic: Update MAINTAINERS
IB/rdmavt: Fix sizeof mismatch
MAINTAINERS: CISCO VIC LOW LATENCY NIC DRIVER
RDMA/bnxt_re: Fix sizeof mismatch for allocation of pbl_tbl.
RDMA/bnxt_re: Use rdma_umem_for_each_dma_block()
RDMA/umem: Move to allocate SG table from pages
lib/scatterlist: Add support in dynamic allocation of SG table from pages
tools/testing/scatterlist: Show errors in human readable form
tools/testing/scatterlist: Rejuvenate bit-rotten test
RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces
RDMA/uverbs: Expose the new GID query API to user space
...
|
||
|
Linus Torvalds
|
7a3dadedc8 |
f2fs-for-5.10-rc1
In this round, we've added new features such as zone capacity for ZNS and a new GC policy, ATGC, along with in-memory segment management. In addition, we could improve the decompression speed significantly by changing virtual mapping method. Even though we've fixed lots of small bugs in compression support, I feel that it becomes more stable so that I could give it a try in production. Enhancement: - suport zone capacity in NVMe Zoned Namespace devices - introduce in-memory current segment management - add standart casefolding support - support age threshold based garbage collection - improve decompression speed by changing virtual mapping method Bug fix: - fix condition checks in some ioctl() such as compression, move_range, etc - fix 32/64bits support in data structures - fix memory allocation in zstd decompress - add some boundary checks to avoid kernel panic on corrupted image - fix disallowing compression for non-empty file - fix slab leakage of compressed block writes In addition, it includes code refactoring for better readability and minor bug fixes for compression and zoned device support. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAl+I0nQACgkQQBSofoJI UNIJdw//Rj0YapYXSu1nlOQppzSAkCiL6wxrrG2qkisRE7uXSYGZfWBqrMT6Asnf i0f25i6ywZOZ00dgN/klZRBh4YYSgJqYx9BPkTxZsQZ/S/EmZJPpr8m4VUB69LKL VijwUdgcW9vNDJ2/DkDQDVBd/ZqRxXnltffWtP4pS96Gj089/dE2q8KXqQrt3LM1 lLQjDfHj+0AyWRzKpErTO0W9DOgO7wmmelS0h6m2RYttkbb328JEZezg5bjWNNlk eTXxuAFFy8Ap9DngkC/sqvY2NRTv1YgOPfrT8XWwdDIiFTZ+LoYdFI5Ap/UW7QwG iz7B/0wPj3+9ncl536LRbFPiLisbYrArYGmZKF6t8w1cP6mTVlileMT4Q6s9+qhn GJS88tTBVlR9vbzDu2brjI6qRQVTBdsohIGoA1g6lz0ogbphhmTzujPbFQ6GTSBi 3sKKp59urkBpVH3TVJU1oshLjIEG2yToMgYwZH9DU7zlzJS6XpetJrzReqItEThc VNixg2DxdIFQ+nrMt+LtWaOHs5qzxIIPksguGEhqSkLL5lI75n2MZxrhKXmUsaZa qItJE0ndJFfi6vggIkJID+a0bpTss7+AxF1AmSZDafMLkZy8j14DNQAnmBUYRX0J 5QExZ+LyyaKjWQ/k9SsSzV1Y3dbguDyB+gkeMhr/6XEr9DSwZc8= =exgv -----END PGP SIGNATURE----- Merge tag 'f2fs-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've added new features such as zone capacity for ZNS and a new GC policy, ATGC, along with in-memory segment management. In addition, we could improve the decompression speed significantly by changing virtual mapping method. Even though we've fixed lots of small bugs in compression support, I feel that it becomes more stable so that I could give it a try in production. Enhancements: - suport zone capacity in NVMe Zoned Namespace devices - introduce in-memory current segment management - add standart casefolding support - support age threshold based garbage collection - improve decompression speed by changing virtual mapping method Bug fixes: - fix condition checks in some ioctl() such as compression, move_range, etc - fix 32/64bits support in data structures - fix memory allocation in zstd decompress - add some boundary checks to avoid kernel panic on corrupted image - fix disallowing compression for non-empty file - fix slab leakage of compressed block writes In addition, it includes code refactoring for better readability and minor bug fixes for compression and zoned device support" * tag 'f2fs-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits) f2fs: code cleanup by removing unnecessary check f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info f2fs: fix writecount false positive in releasing compress blocks f2fs: introduce check_swap_activate_fast() f2fs: don't issue flush in f2fs_flush_device_cache() for nobarrier case f2fs: handle errors of f2fs_get_meta_page_nofail f2fs: fix to set SBI_NEED_FSCK flag for inconsistent inode f2fs: reject CASEFOLD inode flag without casefold feature f2fs: fix memory alignment to support 32bit f2fs: fix slab leak of rpages pointer f2fs: compress: fix to disallow enabling compress on non-empty file f2fs: compress: introduce cic/dic slab cache f2fs: compress: introduce page array slab cache f2fs: fix to do sanity check on segment/section count f2fs: fix to check segment boundary during SIT page readahead f2fs: fix uninit-value in f2fs_lookup f2fs: remove unneeded parameter in find_in_block() f2fs: fix wrong total_sections check and fsmeta check f2fs: remove duplicated code in sanity_check_area_boundary f2fs: remove unused check on version_bitmap ... |
||
|
Linus Torvalds
|
96685f8666 |
powerpc updates for 5.10
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting it for
powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for detecting ISA
v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal Power9
systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about the
hardware topology on Power9/10, where two SMT4 cores can be presented by
firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(), to
prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Biwen
Li, Cameron Berkenpas, Cédric Le Goater, Christophe Leroy, Christoph Hellwig,
Colin Ian King, Daniel Axtens, David Dai, Finn Thain, Frederic Barrat, Gautham
R. Shenoy, Greg Kurz, Gustavo Romero, Ira Weiny, Jason Yan, Joel Stanley,
Jordan Niethe, Kajol Jain, Konrad Rzeszutek Wilk, Laurent Dufour, Leonardo
Bras, Liu Shixin, Luca Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar,
Nathan Lynch, Nicholas Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver
O'Halloran, Pedro Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai,
Qinglang Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott
Cheloha, Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
-----BEGIN PGP SIGNATURE-----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=akeX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting
it for powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for
detecting ISA v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal
Power9 systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about
the hardware topology on Power9/10, where two SMT4 cores can be
presented by firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(),
to prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe
Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn
Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero,
Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad
Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca
Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas
Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro
Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang
Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha,
Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
* tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits)
Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed"
selftests/powerpc: Fix eeh-basic.sh exit codes
cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier
powerpc/time: Make get_tb() common to PPC32 and PPC64
powerpc/time: Make get_tbl() common to PPC32 and PPC64
powerpc/time: Remove get_tbu()
powerpc/time: Avoid using get_tbl() and get_tbu() internally
powerpc/time: Make mftb() common to PPC32 and PPC64
powerpc/time: Rename mftbl() to mftb()
powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S
powerpc/32s: Rename head_32.S to head_book3s_32.S
powerpc/32s: Setup the early hash table at all time.
powerpc/time: Remove ifdef in get_dec() and set_dec()
powerpc: Remove get_tb_or_rtc()
powerpc: Remove __USE_RTC()
powerpc: Tidy up a bit after removal of PowerPC 601.
powerpc: Remove support for PowerPC 601
powerpc: Remove PowerPC 601
powerpc: Drop SYNC_601() ISYNC_601() and SYNC()
powerpc: Remove CONFIG_PPC601_SYNC_FIX
...
|
||
|
Linus Torvalds
|
f065199d4d |
dmaengine updates for v5.10-rc1
Core:
- Mark dma_request_slave_channel() deprecated in favour of dma_request_chan()
- subsystem conversion for tasklet_setup() API
- subsystem removal of local dma_parms for arm drivers
Updates to bunch of driver notably TI, DW and AXI-DMAC
-----BEGIN PGP SIGNATURE-----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=mu9A
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- Mark dma_request_slave_channel() deprecated in favour of
dma_request_chan()
- subsystem conversion for tasklet_setup() API
- subsystem removal of local dma_parms for arm drivers
Also updates to bunch of driver notably TI, DW and AXI-DMAC"
* tag 'dmaengine-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (104 commits)
dmaengine: owl-dma: fix kernel-doc style for enum
dmaengine: zynqmp_dma: fix kernel-doc style for tasklet
dmaengine: xilinx_dma: fix kernel-doc style for tasklet
dmaengine: qcom: bam_dma: fix kernel-doc style for tasklet
dmaengine: altera-msgdma: fix kernel-doc style for tasklet
dmaengine: xilinx: dpdma: convert tasklets to use new tasklet_setup() API
dmaengine: sf-pdma: convert tasklets to use new tasklet_setup() API
dt-bindings: Fix 'reg' size issues in zynqmp examples
dmaengine: rcar-dmac: drop double zeroing
dmaengine: sh: drop double zeroing
dmaengine: ioat: Allocate correct size for descriptor chunk
dmaengine: ti: k3-udma: use devm_platform_ioremap_resource_byname
dmaengine: fsl: remove bad channel update
dmaengine: dma-jz4780: Fix race in jz4780_dma_tx_status
dmaengine: pl330: fix argument for tasklet
dmaengine: dmatest: Return boolean result directly in filter()
dmaengine: dmatest: Check list for emptiness before access its last entry
dmaengine: ti: k3-udma-glue: fix channel enable functions
dmaengine: iop-adma: Fix pointer cast warnings
dmaengine: dw-edma: Fix Using plain integer as NULL pointer in dw-edma-v0-debugfs.c
...
|
||
|
Linus Torvalds
|
c48b75b727 |
sound updates for 5.10
The amount of changes is smaller at this round (what a surprise),
but lots of activity is seen. Most of changes are about ASoC
driver development, especially Intel platforms.
Here are some highlights:
General:
* Replace all tasklet usages with other alternatives
* Cleanup of the ASoC error unwinding code
* Fixes for trivial issues caught by static checker
* Spell fixes allover the places
ALSA Core:
* Lockdep fix for control devices
* Fix for potential OSS sequencer mutex stalls
HD-audio and USB-audio:
* SoundBlaster AE-7 support
* Changes in quirk table for the rename handling
* Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.
ASoC:
* Lots of updates for Intel SOF and SoundWire enablement
* Replacement of the DSP driver for some older x86 systems;
the new code was written from scratch, better maintenance
expected
* Helpers for parsing auxiluary devices from the device tree
* New support for AllWinner A64, Cirrus Logic CS4234, Mediatek
MT6359 Microchip S/PDIF TX and RX controllers, Realtek RT1015P,
and Texas Instruments J721E, TAS2110, TAS2564 and TAS2764
-----BEGIN PGP SIGNATURE-----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=nWAp
-----END PGP SIGNATURE-----
Merge tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The amount of changes is smaller at this round (what a surprise), but
lots of activity is seen. Most of changes are about ASoC driver
development, especially Intel platforms. Here are some highlights:
General:
- Replace all tasklet usages with other alternatives
- Cleanup of the ASoC error unwinding code
- Fixes for trivial issues caught by static checker
- Spell fixes allover the places
ALSA Core:
- Lockdep fix for control devices
- Fix for potential OSS sequencer mutex stalls
HD-audio and USB-audio:
- SoundBlaster AE-7 support
- Changes in quirk table for the rename handling
- Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.
ASoC:
- Lots of updates for Intel SOF and SoundWire enablement
- Replacement of the DSP driver for some older x86 systems; the new
code was written from scratch, better maintenance expected
- Helpers for parsing auxiluary devices from the device tree
- New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
Instruments J721E, TAS2110, TAS2564 and TAS2764"
* tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits)
ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close
ALSA: hda: fix jack detection with Realtek codecs when in D3
ALSA: fireworks: use semicolons rather than commas to separate statements
ALSA: hda: use semicolons rather than commas to separate statements
ALSA: hda/i915 - fix list corruption with concurrent probes
ASoC: dmaengine: Document support for TX only or RX only streams
ASoC: mchp-spdiftx: remove 'TX' from playback stream name
ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn
ASoC: tas2764: Add the driver for the TAS2764
dt-bindings: tas2764: Add the TAS2764 binding doc
ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency
ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled
ASoC: stm32: dfsdm: add actual resolution trace
ASoC: stm32: dfsdm: change rate limits
ASoC: qcom: sc7180: Add support for audio over DP
Asoc: qcom: lpass-platform : Increase buffer size
ASoC: qcom: Add support for lpass hdmi driver
Asoc: qcom: lpass:Update lpaif_dmactl members order
Asoc:qcom:lpass-cpu:Update dts property read API
ASoC: dt-bindings: Add dt binding for lpass hdmi
...
|
||
|
Linus Torvalds
|
726eb70e0d |
Char/Misc driver patches for 5.10-rc1
Here is the big set of char, misc, and other assorted driver subsystem patches for 5.10-rc1. There's a lot of different things in here, all over the drivers/ directory. Some summaries: - soundwire driver updates - habanalabs driver updates - extcon driver updates - nitro_enclaves new driver - fsl-mc driver and core updates - mhi core and bus updates - nvmem driver updates - eeprom driver updates - binder driver updates and fixes - vbox minor bugfixes - fsi driver updates - w1 driver updates - coresight driver updates - interconnect driver updates - misc driver updates - other minor driver updates All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4g8YQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yngKgCeNpArCP/9vQJRK9upnDm8ZLunSCUAn1wUT/2A /bTQ42c/WRQ+LU828GSM =6sO2 -----END PGP SIGNATURE----- Merge tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char, misc, and other assorted driver subsystem patches for 5.10-rc1. There's a lot of different things in here, all over the drivers/ directory. Some summaries: - soundwire driver updates - habanalabs driver updates - extcon driver updates - nitro_enclaves new driver - fsl-mc driver and core updates - mhi core and bus updates - nvmem driver updates - eeprom driver updates - binder driver updates and fixes - vbox minor bugfixes - fsi driver updates - w1 driver updates - coresight driver updates - interconnect driver updates - misc driver updates - other minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits) binder: fix UAF when releasing todo list docs: w1: w1_therm: Fix broken xref, mistakes, clarify text misc: Kconfig: fix a HISI_HIKEY_USB dependency LSM: Fix type of id parameter in kernel_post_load_data prototype misc: Kconfig: add a new dependency for HISI_HIKEY_USB firmware_loader: fix a kernel-doc markup w1: w1_therm: make w1_poll_completion static binder: simplify the return expression of binder_mmap test_firmware: Test partial read support firmware: Add request_partial_firmware_into_buf() firmware: Store opt_flags in fw_priv fs/kernel_file_read: Add "offset" arg for partial reads IMA: Add support for file reads without contents LSM: Add "contents" flag to kernel_read_file hook module: Call security_kernel_post_load_data() firmware_loader: Use security_post_load_data() LSM: Introduce kernel_post_load_data() hook fs/kernel_read_file: Add file_size output argument fs/kernel_read_file: Switch buffer size arg to size_t fs/kernel_read_file: Remove redundant size argument ... |
||
|
Linus Torvalds
|
ade7afe3e6 |
Staging / IIO driver updates for 5.10-rc1
Here is the large set of staging and IIO driver updates for 5.10-rc1. Included in here are: - new IIO drivers - new IIO driver frameworks - various IIO driver fixes and updates - IIO device tree conversions to yaml - so many minor staging driver coding style cleanups - most cdev driver moved out of staging - no new drivers added or removed Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4g+oQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymAyQCghI58tN/Np3itPlZuc+HYFN7OHH8An1TKzCm1 bwkfw5qAcHab+R7KQZOA =BaXS -----END PGP SIGNATURE----- Merge tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver updates from Greg KH: "Here is the large set of staging and IIO driver updates for 5.10-rc1. Included in here are: - new IIO drivers - new IIO driver frameworks - various IIO driver fixes and updates - IIO device tree conversions to yaml - so many minor staging driver coding style cleanups - most cdev driver moved out of staging - no staging drivers added or removed Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (476 commits) staging: comedi: check validity of wMaxPacketSize of usb endpoints found staging: wfx: improve robustness of wfx_get_hw_rate() staging: wfx: drop unicode characters from strings staging: wfx: gpiod_get_value() can return an error staging: wfx: increase robustness of hif_generic_confirm() staging: wfx: wfx_init_common() returns NULL on error staging: wfx: standardize the error when vif does not exist staging: wfx: check memory allocation staging: wfx: improve error handling of hif_join() staging: dpaa2-switch: add a dpaa2_switch prefix to all functions in ethsw.c staging: dpaa2-switch: add a dpaa2_switch_ prefix to all functions in ethsw-ethtool.c staging: rtl8188eu: Fix long lines dt-bindings: staging: wfx: silabs,wfx yaml conversion staging: wfx: update copyrights dates staging: wfx: fix QoS priority for slow buses staging: wfx: fix BA sessions for older firmwares staging: wfx: remove remaining code of 'secure link' feature staging: wfx: fix handling of MMIC error staging: vchiq: Fix list_for_each exit tests staging: greybus: use __force when assigning __u8 value to snd_ctl_elem_type_t ... |
||
|
Linus Torvalds
|
1a31c12371 |
- New Drivers
- Add support for initialising shared (between children) Regmaps
- Add support for Kontron SL28CPLD
- Add support for ENE KB3930 Embedded Controller
- Add support for Intel FPGA PAC MAX 10 BMC
- New Device Support
- Add support for Power to Ricoh RN5T618
- Add support for UART to Intel Lakefield
- Add support for LP87524_Q1 to Texas Instruments LP87565
- New Functionality
- Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1
- Use new helper dev_err_probe(); madera-core, stmfx, wcd934x
- Use new GPIOD API; dm355evm_msp
- Add wake-up capability; sprd-sc27xx-spi
- Add ACPI support; kempld-core
- Fix-ups
- Trivial (spelling/whitespace); Kconfig, ab8500
- Fix for unused variables; khadas-mcu, kempld-core
- Remove unused header file(s); mt6360-core
- Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic
- Add COMPILE_TEST support; asic3, tmio_core
- Add dependency on I2C; SL28CPLD
- Bug Fixes
- Fix memory leak(s); sm501
- Do not free regmap_config's 'name' until exit; syscon
-----BEGIN PGP SIGNATURE-----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=1wSH
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for initialising shared (between children) Regmaps
- Add support for Kontron SL28CPLD
- Add support for ENE KB3930 Embedded Controller
- Add support for Intel FPGA PAC MAX 10 BMC
New Device Support:
- Add support for Power to Ricoh RN5T618
- Add support for UART to Intel Lakefield
- Add support for LP87524_Q1 to Texas Instruments LP87565
New Functionality:
- Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1
- Use new helper dev_err_probe(); madera-core, stmfx, wcd934x
- Use new GPIOD API; dm355evm_msp
- Add wake-up capability; sprd-sc27xx-spi
- Add ACPI support; kempld-core
Fix-ups:
- Trivial (spelling/whitespace); Kconfig, ab8500
- Fix for unused variables; khadas-mcu, kempld-core
- Remove unused header file(s); mt6360-core
- Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic
- Add COMPILE_TEST support; asic3, tmio_core
- Add dependency on I2C; SL28CPLD
Bug Fixes:
- Fix memory leak(s); sm501
- Do not free regmap_config's 'name' until exit; syscon"
* tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits)
mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI
mfd: sl28cpld: Depend on I2C
mfd: asic3: Build if COMPILE_TEST=y
dt-bindings: mfd: Correct interrupt flags in examples
mfd: Add ACPI support to Kontron PLD driver
mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC
mfd: lp87565: Add LP87524-Q1 variant
dt-bindings: mfd: Add LP87524-Q1
dt-bindings: mfd: lp87565: Convert to yaml
mfd: mt6360: Remove unused include <linux/version.h>
mfd: sm501: Fix leaks in probe()
mfd: syscon: Don't free allocated name for regmap_config
dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles
dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings
dt-bindings: mfd: ab8500: Remove weird Unicode characters
mfd: sprd: Add wakeup capability for PMIC IRQ
mfd: intel-lpss: Add device IDs for UART ports for Lakefield
mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table
mfd: wcd934x: Simplify with dev_err_probe()
mfd: stmfx: Simplify with dev_err_probe()
...
|
||
|
Linus Torvalds
|
cf1d2b44f6 |
ACPI updates for 5.10-rc1
- Add support for generic initiator-only proximity domains to
the ACPI NUMA code and the architectures using it (Jonathan
Cameron).
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo).
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada).
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki).
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
* Add predefined names from the SMBus sepcification (Bob Moore).
* Update acpi_help UUID list (Bob Moore).
* Return exceptions for string-to-integer conversions in iASL (Bob
Moore).
* Add a new "ALL <NameSeg>" debugger command (Bob Moore).
* Add support for 64 bit risc-v compilation (Colin Ian King).
* Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap).
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung).
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko).
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo).
- Add missing config_item_put() to fix refcount leak (Hanjun Guo).
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo).
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings).
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov).
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao).
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing).
- Serialize tools/power/acpi Makefile (Thomas Renninger).
-----BEGIN PGP SIGNATURE-----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=feLU
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it, clean up some
non-ACPICA code referring to debug facilities from ACPICA, reduce the
overhead related to accessing GPE registers, add a new DPTF (Dynamic
Power and Thermal Framework) participant driver, update the ACPICA
code in the kernel to upstream revision 20200925, add a new ACPI
backlight whitelist entry, fix a few assorted issues and clean up some
code.
Specifics:
- Add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it (Jonathan Cameron)
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo)
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada)
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki)
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
+ Add predefined names from the SMBus sepcification (Bob Moore)
+ Update acpi_help UUID list (Bob Moore)
+ Return exceptions for string-to-integer conversions in iASL (Bob
Moore)
+ Add a new "ALL <NameSeg>" debugger command (Bob Moore)
+ Add support for 64 bit risc-v compilation (Colin Ian King)
+ Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung)
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)
- Add missing config_item_put() to fix refcount leak (Hanjun Guo)
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo)
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings)
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov)
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao)
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)
- Serialize tools/power/acpi Makefile (Thomas Renninger)"
* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPICA: Update version to 20200925 Version 20200925
ACPICA: Remove unnecessary semicolon
ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
ACPICA: iASL: Return exceptions for string-to-integer conversions
ACPICA: acpi_help: Update UUID list
ACPICA: Add predefined names found in the SMBus sepcification
ACPICA: Tree-wide: fix various typos and spelling mistakes
ACPICA: Drop the repeated word "an" in a comment
ACPICA: Add support for 64 bit risc-v compilation
ACPI: button: fix handling lid state changes when input device closed
tools/power/acpi: Serialize Makefile
ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
ACPI / extlog: Check for RDMSR failure
ACPI: Make acpi_evaluate_dsm() prototype consistent
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
...
|
||
Rishabh Bhatnagar
|
526b9e0cf3 |
remoteproc: Add recovery configuration to the sysfs interface
Add recovery configuration to the sysfs interface. This will allow usage of this configuration feature in production devices where access to debugfs might be limited. Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Link: https://lore.kernel.org/r/1601662144-5964-4-git-send-email-rishabhb@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> |
||
|
Rishabh Bhatnagar
|
f75c6043a3 |
remoteproc: Add coredump as part of sysfs interface
Add coredump as part of the sysfs interface. This will allow usage of this configuration feature in production devices where access to debugfs might be limited. Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Link: https://lore.kernel.org/r/1601662144-5964-3-git-send-email-rishabhb@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> |
||
|
Linus Torvalds
|
7b540812cc |
selinux/stable-5.10 PR 20201012
-----BEGIN PGP SIGNATURE-----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=NNLw
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20201012' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"A decent number of SELinux patches for v5.10, twenty two in total. The
highlights are listed below, but all of the patches pass our test
suite and merge cleanly.
- A number of changes to how the SELinux policy is loaded and managed
inside the kernel with the goal of improving the atomicity of a
SELinux policy load operation.
These changes account for the bulk of the diffstat as well as the
patch count. A special thanks to everyone who contributed patches
and fixes for this work.
- Convert the SELinux policy read-write lock to RCU.
- A tracepoint was added for audited SELinux access control events;
this should help provide a more unified backtrace across kernel and
userspace.
- Allow the removal of security.selinux xattrs when a SELinux policy
is not loaded.
- Enable policy capabilities in SELinux policies created with the
scripts/selinux/mdp tool.
- Provide some "no sooner than" dates for the SELinux checkreqprot
sysfs deprecation"
* tag 'selinux-pr-20201012' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (22 commits)
selinux: provide a "no sooner than" date for the checkreqprot removal
selinux: Add helper functions to get and set checkreqprot
selinux: access policycaps with READ_ONCE/WRITE_ONCE
selinux: simplify away security_policydb_len()
selinux: move policy mutex to selinux_state, use in lockdep checks
selinux: fix error handling bugs in security_load_policy()
selinux: convert policy read-write lock to RCU
selinux: delete repeated words in comments
selinux: add basic filtering for audit trace events
selinux: add tracepoint on audited events
selinux: Create new booleans and class dirs out of tree
selinux: Standardize string literal usage for selinuxfs directory names
selinux: Refactor selinuxfs directory populating functions
selinux: Create function for selinuxfs directory cleanup
selinux: permit removing security.selinux xattr before policy load
selinux: fix memdup.cocci warnings
selinux: avoid dereferencing the policy prior to initialization
selinux: fix allocation failure check on newpolicy->sidtab
selinux: refactor changing booleans
selinux: move policy commit after updating selinuxfs
...
|
||
|
Linus Torvalds
|
50d228345a |
As hoped, things calmed down for docs this cycle; fewer changes and almost
no conflicts at all. This pull includes:
- A reworked and expanded user-mode Linux document
- Some simplifications and improvements for submitting-patches.rst
- An emergency fix for (some) problems with Sphinx 3.x
- Some welcome automarkup improvements to automatically generate
cross-references to struct definitions and other documents
- The usual collection of translation updates, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl+ErNYPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y284H/3bv9fahbg16AJcKYqJXFHGpDs3CsASPnJqQ
9HQoV5tg6Qd4kI3oFb+30l8SK73Wr2t685/DhOPDRR/vN3B5M1vOQvPRL/dEqiwi
aUEhtMbnC/trSbteXsjGDWT+1EnI/+R3NFV++WiRp1XxE4DRXL3xySTeviR0IW+V
rQxU7VCcVp0bklVH+gqjrsvqU5iZeckyZB6evc8X92ThhzjNprR5KVxxgl1wxcu/
dPYizHoKYVoLVNw50rwPGt2hmq9RpyDM6Xh9UhLHcA57ENyzr8NNTJBOT0tVMTWV
smU01X/ECoy54kj1w8AKP+f7F0G7DUU+Jz68X0X/kYPq520dUs4=
=Ovox
-----END PGP SIGNATURE-----
Merge tag 'docs-5.10' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"As hoped, things calmed down for docs this cycle; fewer changes and
almost no conflicts at all. This includes:
- A reworked and expanded user-mode Linux document
- Some simplifications and improvements for submitting-patches.rst
- An emergency fix for (some) problems with Sphinx 3.x
- Some welcome automarkup improvements to automatically generate
cross-references to struct definitions and other documents
- The usual collection of translation updates, typo fixes, etc"
* tag 'docs-5.10' of git://git.lwn.net/linux: (81 commits)
gpiolib: Update indentation in driver.rst for code excerpts
Documentation/admin-guide: tainted-kernels: Fix typo occured
Documentation: better locations for sysfs-pci, sysfs-tagging
docs: programming-languages: refresh blurb on clang support
Documentation: kvm: fix a typo
Documentation: Chinese translation of Documentation/arm64/amu.rst
doc: zh_CN: index files in arm64 subdirectory
mailmap: add entry for <mstarovoitov@marvell.com>
doc: seq_file: clarify role of *pos in ->next()
docs: trace: ring-buffer-design.rst: use the new SPDX tag
Documentation: kernel-parameters: clarify "module." parameters
Fix references to nommu-mmap.rst
docs: rewrite admin-guide/sysctl/abi.rst
docs: fb: Remove vesafb scrollback boot option
docs: fb: Remove sstfb scrollback boot option
docs: fb: Remove matroxfb scrollback boot option
docs: fb: Remove framebuffer scrollback boot option
docs: replace the old User Mode Linux HowTo with a new one
Documentation/admin-guide: blockdev/ramdisk: remove use of "rdev"
Documentation/admin-guide: README & svga: remove use of "rdev"
...
|
||
|
Ivan Zaentsev
|
78eef5d952 |
docs: w1: w1_therm: Fix broken xref, mistakes, clarify text
sysfs attribute names are mixed with the same normal text terms. Use ReST to distinguish. Fix typos and mistakes. Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Link: https://lore.kernel.org/r/20201008054259.5461-1-ivan.zaentsev@wirenboard.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Kajol Jain
|
09b791d955 |
powerpc/hv-gpci: Add sysfs files inside hv-gpci device to show cpumask
Patch here adds a cpumask attr to hv_gpci pmu along with ABI documentation. Primary use to expose the cpumask is for the perf tool which has the capability to parse the driver sysfs folder and understand the cpumask file. Having cpumask file will reduce the number of perf command line parameters (will avoid "-C" option in the perf tool command line). It can also notify the user which is the current cpu used to retrieve the counter data. command:# cat /sys/devices/hv_gpci/cpumask 0 Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201003074943.338618-5-kjain@linux.ibm.com |
||
|
Kajol Jain
|
435387dd1f |
Documentation/ABI: Add ABI documentation for hv-gpci format
This patch adds ABI documentation for hv-gpci event format. Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201003074943.338618-3-kjain@linux.ibm.com |
||
|
Kajol Jain
|
264a034099 |
Documentation/ABI: Add ABI documentation for hv-24x7 format
This patch adds ABI documentation for hv-24x7 format. Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201003074943.338618-2-kjain@linux.ibm.com |
||
Sebastian Reichel
|
05f94eb989 |
power: supply: document current direction
Currently the sign for CURRENT_NOW and CURRENT_AVG is a bit of a mess. There are basically 3 different ways battery fuel gauges report the current: 1. uses negative values for discharging and positive values for charging 2. uses positive values for discharging and negative values for discharging (opposit of 1) 3. only uses positive values As a result userspace currently cannot use the sign at all in a generic way. Let's solve the issue by documenting a canonical way for reporting the data and ensure new drivers follow this way. Then existing drivers can be fixed on a case-by-case basis. The 'negative value = battery discharging' has been choosen, since there are only very few drivers doing it the other way around. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> |
||
Cezary Rojewski
|
8f80a834b9
|
ASoC: Intel: catpt: Simple sysfs attributes
Add sysfs entries for displaying version of FW currently in use as well as dumping full FW information including build and log-providers hashes. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200929141247.8058-10-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Ivan Zaentsev
|
9ace0b4dab |
w1: w1_therm: Add support for GXCAS GX20MH01 device.
GX20MH01 device shares family number 0x28 with DS18B20. The device is generally compatible with DS18B20. Added are the lowest 2^-5, 2^-6 temperature bits in Config register; R2 bit in Config register enabling 13 and 14 bit resolutions. It is powered up in 14 bit mode. Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Link: https://lore.kernel.org/r/20200904160004.87710-2-ivan.zaentsev@wirenboard.ru Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ivan Zaentsev
|
021da53e65 |
w1: w1_therm: Add sysfs entries to control conversion time and driver features
The conversion time of common DS18B20 clones deviates from
datasheet specs. Allow adjustment and automatic measure of the
conversion time.
Add 'conv_time' sysfs attribute:
*read*: Current conversion time in milliseconds.
*write*:
'0': Set default conversion time.
'1': Measure and set the conversion time. Make a
single temperature conversion, poll and measure
an actual value. Measured value is increased
by 20% for temperature drift. A new conversion
time is returned by reading the same attribute.
other positive value:
Set the conversion time in milliseconds.
The setting is active until a resolution change. Then it is reset to
default conversion time for a new resolution.
Add 'features' sysfs attribute to control optional driver settings
per device. Bit masks to read/write (logical OR):
1: Enable check for conversion success. If byte 6 of
scratchpad memory is 0xC after conversion, and
temperature reads 85.00 (powerup value) or 127.94
(insufficient power) - return a conversion error.
2: Enable poll for conversion completion. Generate read cycles
after the conversion start and wait for 1's. In parasite
power mode this feature is not available.
There are some clones of DS18B20 with fixed 12 bit resolution. Make the
driver verify the resolution by reading back the device after resolution
change.
Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Link: https://lore.kernel.org/r/20200904160004.87710-1-ivan.zaentsev@wirenboard.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
Bhaumik Bhatt
|
21cb9b18ed |
bus: mhi: core: Introduce sysfs entries for MHI
Introduce sysfs entries to enable userspace clients the ability to read the serial number and the OEM PK Hash values obtained from BHI. OEMs need to read these device-specific hardware information values through userspace for factory testing purposes and cannot be exposed via degbufs as it may remain disabled for performance reasons. Also, update the documentation for ABI to include these entries. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [mani: used dev_groups to manage sysfs attributes] Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-16-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
4cb1a880e7 |
soundwire updates for 5.10-rc1
This round of update includes:
- Generic bandwidth allocation algorithm from Intel folks
- PM support for Intel chipsets
- Updates to Intel drivers which makes sdw usable on latest laptops
- Support for MMIO SDW controllers found in QC chipsets
- Update to subsystem to use helpers in bitfield.h to manage register
bits
-----BEGIN PGP SIGNATURE-----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=ALTw
-----END PGP SIGNATURE-----
Merge tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for 5.10-rc1
This round of update includes:
- Generic bandwidth allocation algorithm from Intel folks
- PM support for Intel chipsets
- Updates to Intel drivers which makes sdw usable on latest laptops
- Support for MMIO SDW controllers found in QC chipsets
- Update to subsystem to use helpers in bitfield.h to manage register
bits
* tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (66 commits)
soundwire: sysfs: add slave status and device number before probe
soundwire: bus: add enumerated Slave device to device list
soundwire: remove an unnecessary NULL check
soundwire: cadence: add data port test fail interrupt
soundwire: intel: enable test modes
soundwire: enable Data Port test modes
soundwire: intel: use {u32|u16}p_replace_bits
soundwire: cadence: use u32p_replace_bits
soundwire: qcom: get max rows and cols info from compatible
soundwire: qcom: add support to block packing mode
soundwire: qcom: clear BIT FIELDs before value set.
soundwire: Add generic bandwidth allocation algorithm
soundwire: cadence: add parity error injection through debugfs
soundwire: bus: export broadcast read/write capability for tests
ASoC: codecs: realtek-soundwire: ignore initial PARITY errors
soundwire: bus: use quirk to filter out invalid parity errors
soundwire: slave: add first_interrupt_done status
soundwire: bus: filter-out unwanted interrupt reports
ASoC/soundwire: bus: use property to set interrupt masks
soundwire: qcom: fix SLIBMUS/SLIMBUS typo
...
|
||
|
Xu Yilun
|
876611c493 |
mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC
This patch implements the basic functions of the BMC chip for some Intel FPGA PCIe Acceleration Cards (PAC). The BMC is implemented using the Intel MAX 10 CPLD. This BMC chip is connected to the FPGA by a SPI bus. To provide direct register access from the FPGA, the "SPI slave to Avalon Master Bridge" (spi-avmm) IP is integrated in the chip. It converts encoded streams of bytes from the host to the internal register read/write on the Avalon bus. So This driver uses the regmap-spi-avmm for register accessing. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Paul Moore
|
0d50f059c4 |
selinux: provide a "no sooner than" date for the checkreqprot removal
We marked /sys/fs/selinux/checkreqprot as deprecated in Linux v5.7, but didn't provide any guidance as to the timeframe. Considering the state of checkreqprot, it seems like one year should be enough time. Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
Pierre-Louis Bossart
|
0173f525b2 |
soundwire: sysfs: add slave status and device number before probe
The MIPI DisCo device properties that are read by the driver from platform firmware, or hard-coded in the driver, should only be provided as sysfs entries when a driver probes successfully. However the device status and device number is updated even when there is no driver present, and hence can be updated when a Slave device is detected on the bus without being described in platform firmware and without any driver registered/probed. As suggested by GregKH, the attribute group for Slave status and device number is is added by default upon device registration. Credits to Vinod Koul for the status_show() function, shared in a separate patch and used as is here. The status table was modified to remove an unnecessary enum and status_show() is handled in a different group attribute than what was suggested by Vinod. Tested-by: Srinivas Kandgatla <srinivas.kandagatla@linaro.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Co-developed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200924194430.121058-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
Oded Gabbay
|
2f55342c5e |
habanalabs: replace armcp with the generic cpucp
ArmCP mandates that the device CPU is always an ARM processor, which might be wrong in the future. Most of this change is an internal renaming of variables, functions and defines but there are two entries in sysfs which have armcp in their names. Add identical cpucp entries but don't remove yet the armcp entries. Those will be deprecated next year. Add the documentation about it in sysfs documentation. Signed-off-by: Moti Haimovski <mhaimovski@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> |
||
|
Greg Kroah-Hartman
|
b290f902b8 |
Second set of features and cleanups for IIO in 5.10
We have a couple of changes that apply to large sets of drivers, so
I have grouped those to keep this short.
There are a few late breaking fixes in here that can wait for the
merge window.
dt yaml conversions
-------------------
* adi,ad7768-1
* adi,ad7949
* aspeed,ast2400
* cosmic,10001-adc
* dlg,da9150-gpadc
* fsl,imx25-gcq
* fsl,imx7d-adc
* fsl,vf610
* holt,hi8435
* marvell,berlin2-adc
* motorola,cpcap-adc
* nuvoton,nau7802
* nuvoton,npcm750-adc
* nxp,lpc1850-adc
* nxp,lpc3220
* sprd,sc2720-adc
* st,stmpe-adc
* ti,adc12138
* ti,ads1015
* ti,ads7950
* ti,twl4030-madc
Features
--------
* adxrs290
- Add triggered buffer support and expose data ready signal as a possible
trigger. Includes updating bindings.
- Add debugfs hooks for register access.
* mlx90632
- Add a clear user interface to override the measured ambient temperature.
* vl53l0x
- Add IRQ support including dt bindings.
Cleanups and minor fixes
------------------------
(groups)
Replace mlock with local lock:
* adf4350
* exynos-adc
* fls-imx25-gcq
* stm32-dac
devm use to simplify probe error handling and remove functions.
* adis16201
* adis16203
* adis16209
* adis16240
* adis16136
* adis16260
* adis16400
* adis16460
* adis16480
* adis library - drop unused adis_setup_buffer_and_trigger()
of_match_ptr removal and incorrect ACPI binding removal
of_match_ptr() rarely makes sense in an IIO driver as space saving
is trivial and it breaks ACPI PRP0001 based instantiation.
Mostly this series is about removing examples that get copied into new
drivers.
* ad2s1200
* ad5272
* ad5446
* ad5592r
* ad5593r
* ad5703
* ak8974
* ak8975
* ams-iaq-core
* as3935
* atlas-sensor
* ds1803
* hdc100x
* htu21
* icp10100
* lmp91000
* pulsedlight
* max30102
* max5432
* max5481
* mcp4018
* mcp4131
* mcp4531
* mcp4725
* ms5611
* ms5637
* si7020
* sgp30
* ti-dac082s085
* ti-dac5571
* tmp007
* tsys01
* vz89x
* zpa2326
kernel-doc fixes
* iio-core
* ad7303
* ad7947
* adis16080
* adis16400
* iio_dummy_evgen
* sgp30
Fixes for buffer alignment when passed to iio_push_to_buffers_with_timestamp()
This is a long running effort. There are a few more drivers to come.
* inv_mpu6050
* itg3200
* si1145
* st_lsm6dsx
* ti-adc0832
* ti-adc12138
(not driver focused)
* MAINTAINERS
- Consolidate Analog Device IIO entries whilst removing Beniamin Bia.
- Remove Hartmut Knaack as a listed IIO maintainer as he hasn't been
active for a long time and people are getting intermitted bounces.
* Add __printf() markings to a few functions that were missing them.
* drop some rotted documentation from staging.
* rework buffer sysfs file creation (precursor to multiple buffer support)
(individual drivers)
* ad5592r
- Fix use of true for IIO_SHARED_BY_TYPE
- Tidy up locking and indentation.
* ad9467
- Improve error message on chip-id missmatch.
- Use more appropriate error value if chip-id not recognised.
* adis-library
- Simplify burst mode handling.
* adxrs290
- Make sure to switch device to standby mode during remove.
* as73211
- Increase measurement timeout as seems some devices are slower.
* bma180
- Fix use of true fo IIO_SHARED_BY_TYPE
* exynos_adc
- Update binding to require second interrut with touch screen.
- Update binding to not require syscon on S5Pv210
* hmc5843
- Fix use of true for IIO_SHARED_BY_TYPE
* inv_mpu6050
- Use regmap_noinc_read() for fifo reading.
* palmas_gpadc
- Use module_platform_driver() to remove boilerplate.
* meson-saradc
- style consistency fixes
* rockchip_saradc
- Allow compile testing with !ARM.
* st_lsm6dsx
- Changing scaling factor to use IIO_VAL_INT_PLUS_NANO to improve precision.
- Fix an issue with unchecked return value.
* stm32-adc
- Fix a missing return introduced in dev_err_probe() patch earlier in
cycle.
* sx9310
- Prefer async mode for probe as paticularly slow startup.
* vcnl4000
- Add missing interrupt property to dt binding.
-----BEGIN PGP SIGNATURE-----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=yrII
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of features and cleanups for IIO in 5.10
We have a couple of changes that apply to large sets of drivers, so
I have grouped those to keep this short.
There are a few late breaking fixes in here that can wait for the
merge window.
dt yaml conversions
-------------------
* adi,ad7768-1
* adi,ad7949
* aspeed,ast2400
* cosmic,10001-adc
* dlg,da9150-gpadc
* fsl,imx25-gcq
* fsl,imx7d-adc
* fsl,vf610
* holt,hi8435
* marvell,berlin2-adc
* motorola,cpcap-adc
* nuvoton,nau7802
* nuvoton,npcm750-adc
* nxp,lpc1850-adc
* nxp,lpc3220
* sprd,sc2720-adc
* st,stmpe-adc
* ti,adc12138
* ti,ads1015
* ti,ads7950
* ti,twl4030-madc
Features
--------
* adxrs290
- Add triggered buffer support and expose data ready signal as a possible
trigger. Includes updating bindings.
- Add debugfs hooks for register access.
* mlx90632
- Add a clear user interface to override the measured ambient temperature.
* vl53l0x
- Add IRQ support including dt bindings.
Cleanups and minor fixes
------------------------
(groups)
Replace mlock with local lock:
* adf4350
* exynos-adc
* fls-imx25-gcq
* stm32-dac
devm use to simplify probe error handling and remove functions.
* adis16201
* adis16203
* adis16209
* adis16240
* adis16136
* adis16260
* adis16400
* adis16460
* adis16480
* adis library - drop unused adis_setup_buffer_and_trigger()
of_match_ptr removal and incorrect ACPI binding removal
of_match_ptr() rarely makes sense in an IIO driver as space saving
is trivial and it breaks ACPI PRP0001 based instantiation.
Mostly this series is about removing examples that get copied into new
drivers.
* ad2s1200
* ad5272
* ad5446
* ad5592r
* ad5593r
* ad5703
* ak8974
* ak8975
* ams-iaq-core
* as3935
* atlas-sensor
* ds1803
* hdc100x
* htu21
* icp10100
* lmp91000
* pulsedlight
* max30102
* max5432
* max5481
* mcp4018
* mcp4131
* mcp4531
* mcp4725
* ms5611
* ms5637
* si7020
* sgp30
* ti-dac082s085
* ti-dac5571
* tmp007
* tsys01
* vz89x
* zpa2326
kernel-doc fixes
* iio-core
* ad7303
* ad7947
* adis16080
* adis16400
* iio_dummy_evgen
* sgp30
Fixes for buffer alignment when passed to iio_push_to_buffers_with_timestamp()
This is a long running effort. There are a few more drivers to come.
* inv_mpu6050
* itg3200
* si1145
* st_lsm6dsx
* ti-adc0832
* ti-adc12138
(not driver focused)
* MAINTAINERS
- Consolidate Analog Device IIO entries whilst removing Beniamin Bia.
- Remove Hartmut Knaack as a listed IIO maintainer as he hasn't been
active for a long time and people are getting intermitted bounces.
* Add __printf() markings to a few functions that were missing them.
* drop some rotted documentation from staging.
* rework buffer sysfs file creation (precursor to multiple buffer support)
(individual drivers)
* ad5592r
- Fix use of true for IIO_SHARED_BY_TYPE
- Tidy up locking and indentation.
* ad9467
- Improve error message on chip-id missmatch.
- Use more appropriate error value if chip-id not recognised.
* adis-library
- Simplify burst mode handling.
* adxrs290
- Make sure to switch device to standby mode during remove.
* as73211
- Increase measurement timeout as seems some devices are slower.
* bma180
- Fix use of true fo IIO_SHARED_BY_TYPE
* exynos_adc
- Update binding to require second interrut with touch screen.
- Update binding to not require syscon on S5Pv210
* hmc5843
- Fix use of true for IIO_SHARED_BY_TYPE
* inv_mpu6050
- Use regmap_noinc_read() for fifo reading.
* palmas_gpadc
- Use module_platform_driver() to remove boilerplate.
* meson-saradc
- style consistency fixes
* rockchip_saradc
- Allow compile testing with !ARM.
* st_lsm6dsx
- Changing scaling factor to use IIO_VAL_INT_PLUS_NANO to improve precision.
- Fix an issue with unchecked return value.
* stm32-adc
- Fix a missing return introduced in dev_err_probe() patch earlier in
cycle.
* sx9310
- Prefer async mode for probe as paticularly slow startup.
* vcnl4000
- Add missing interrupt property to dt binding.
* tag 'iio-for-5.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
dt-bindings: iio: vishay,vcnl4000: add interrupts property
iio:imu:inv_mpu6050: Use regmap_noinc_read for fifo reads.
iio:imu:inv_mpu6050 Fix dma and ts alignment and data leak issues.
iio:adc:ti-adc12138 Fix alignment issue with timestamp
iio:adc:ti-adc0832 Fix alignment issue with timestamp
iio:imu:st_lsm6dsx Fix alignment and data leak issues
iio:light:si1145: Fix timestamp alignment and prevent data leak.
iio:gyro:itg3200: Fix timestamp alignment and prevent data leak.
iio:imu:st_lsm6dsx: check st_lsm6dsx_shub_read_output return
iio: adc: exynos_adc: Replace indio_dev->mlock with own device lock
dt-bindings:iio:adc:holt,hi8435 yaml conversion
dt-bindings:iio:adc:adi,ad7768-1 yaml conversion
dt-bindings:iio:adc:adi,ad7949 yaml conversion
dt-bindings:iio:adc:dlg,da9150-gpadc yaml conversion
dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion
dt-bindings:iio:adc:nxp,lpc3220-adc yaml conversion
dt-bindings:iio:adc:nxp,lpc1850-adc yaml conversion
dt-bindings:iio:adc:fsl,imx25-gcq yaml conversion
dt-bindings:iio:adc:fsl,imx7d-adc yaml conversion
dt-bindings:iio:adc:ti,ads1015 yaml conversion
...
|
||
Srinivas Pandruvada
|
2ce6324ead |
ACPI: DPTF: Add PCH FIVR participant driver
This driver adds support for Dynamic Platform and Thermal Framework (DPTF) PCH (Platform Controller Hub) FIVR (Fully Integrated Voltage Regulator) participant support. This participant is responsible for exposing platform telemetry and control for: freq_mhz_high_clock freq_mhz_low_clock These attributes are used to get and set PCH FIVR switching frequency for thermal and radio frequency interference mitigation. Refer to Documentation/ABI/testing/sysfs-platform-dptf for ABI details. ACPI methods description used in this driver: RFC0: This ACPI method to set PCH FIVR switching frequency when FIVR clock is 19.2MHz or 24MHz. The ACPI method takes a DWORD value. GFC0: This ACPI method to get PCH FIVR switching frequency when FIVR clock is 19.2MHz or 24MHz. RFC1: This ACPI method to set PCH FIVR switching frequency when FIVR clock is 38.4MHz. The ACPI method takes a DWORD value. GFC1: This ACPI method to get PCH FIVR switching frequency when FIVR clock is 38.4MHz. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Stephen Boyd
|
b854e83101 |
docs: stable-ABI: Document /sys/kernel/notes
Document the notes file in sysfs as the running vmlinux's .note section in binary format. Hopefully this helps someone like me realize the kernel exposes the note section in sysfs in the future. Take the date from when the file was introduced. It's been a while so presumably this is stable and not testing material. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200909063752.931283-1-swboyd@chromium.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
Jonathan Cameron
|
5999439859 |
staging:iio:light: Move tsl2x7x ABI docs to correct location.
These seem to be up to date but never moved out of staging when the driver did. Hence let us move them out now. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Brian Masney <masneyb@onstation.org> Cc: Brian Masney <masneyb@onstation.org> Link: https://lore.kernel.org/r/20200905174721.216452-3-jic23@kernel.org |
||
|
Greg Kroah-Hartman
|
bbc11b34fa |
Here is the first set of changes for the 5.10-rc1 merge window.
Xilinx: - Luca's changes clean up the xilinx-spi driver and add better diagnostics on errors. Core: - I cleaned up a stray comment. - Richard's change marks FPGA manager tasks un-interruptible. - Tom has agreed to help out as Reviewer in the FPGA Manager subsystem. DFL: - Xu's changes add a new bus that is the first part of a series to support adding devices via DFL (the other parts are still under review) All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my for-next branch) without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> -----BEGIN PGP SIGNATURE----- iIUEABYIAC0WIQRORt0E5Sb/c/mZMgkXxQAtim5VSwUCX16ipg8cbWRmQGtlcm5l bC5vcmcACgkQF8UALYpuVUu+CwD7BSBH5lQEc76fm5m3pQQKKGDEgj7SfqCTtvNx B8sGSiUA/RS1x6Ddbg1he5z4vtkkTin0TwW9fSdFI9msMvV2EU4E =4LFJ -----END PGP SIGNATURE----- Merge tag 'fpga-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next Moritz writes: Here is the first set of changes for the 5.10-rc1 merge window. Xilinx: - Luca's changes clean up the xilinx-spi driver and add better diagnostics on errors. Core: - I cleaned up a stray comment. - Richard's change marks FPGA manager tasks un-interruptible. - Tom has agreed to help out as Reviewer in the FPGA Manager subsystem. DFL: - Xu's changes add a new bus that is the first part of a series to support adding devices via DFL (the other parts are still under review) All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my for-next branch) without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> * tag 'fpga-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: dfl: create a dfl bus type to support DFL devices fpga: fpga-region: Cleanup an outdated comment fpga: dfl: map feature mmio resources in their own feature drivers fpga manager: xilinx-spi: provide better diagnostics on programming failure fpga manager: xilinx-spi: add error checking after gpiod_get_value() fpga manager: xilinx-spi: fix write_complete timeout handling fpga manager: xilinx-spi: remove final dot from dev_err() strings fpga manager: xilinx-spi: remove stray comment fpga: dfl: change data type of feature id to u16 MAINTAINERS: Add Tom Rix as fpga reviewer fpga: stratix10-soc: make FPGA task un-interruptible |
||
|
Greg Kroah-Hartman
|
1622d35453 |
Merge 5.9-rc5 into staging-next
We want the staging/iio changes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Crt Mori
|
dde8ceec9e |
iio: temperature: mlx90632: Interface to change object ambient temperature
Since object temperature might be different than the sensor temperature the infrared sensors should provide an interface to inject ambient temperature. This was in past done via write to ambient temperature interface (in_temp_ambient_raw), but I think most people did not know about it. This solution introduces a new iio type of the CALIBAMBIENT which is hopefully more descriptive and more explicit about the purpose and capabilities of the sensors. Signed-off-by: Crt Mori <cmo@melexis.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200906210231.383976-1-cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Chao Yu
|
093749e296 |
f2fs: support age threshold based garbage collection
There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Greg Kroah-Hartman
|
f7dbcd1770 |
FSI changes for 5.10
- Misc code cleanups. Thanks to Colin, Xu and Rikard - Features for the ASPEED FSI master * Detect connection type and routing for Tacoma * Run at full speed (200MHz) by default * Set bus speed with a parameter * CFAM reset GPIO * 23 bit addressing - Core features * Disable unused links * Set LBUS ownership -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAl9bBWwACgkQa3ZZB4FH cJ7Usg/9G1vnAnxHk5/nAaf6JCw1CS5UINQjsqV90tAuo3Ry62E5Nx4o+3XJx3Vv EfXh3xdRnm6y2di5BQ1mqcVU6il2V6dDWl6Q6uB09IHU+bZFdViqzxMlt/aWho7d Jm0YIcPjQqwA7vzO/FgFVNqYMFEhmfBlpG+Hb4E1fdPk2jfMipD8DhuVP5r42/bS HFuxt8HWrhgHwKzQEXu3n0WJxRbREKv7+TGGDD6DTX97pgNqlwyjeekhGoY7T26x LC2zVm+3n6DAt7Rm+Z4G61yh77jThAYjHE5OcOFV8C3KC+H3R6U35te6OtQ0vpws 8GLTw6cN6SlBr9yjac5ajCH4zI5iFa9xfTECC2o+YuDYSZu+2hAdBGzTUd3FrKQw XN5940K2ZDPQcltMiY0OY14O9ynb19KJPzVIBWoPfOo0ILgn6cmYZTP6WAmvzhob g5cvrafrH9LWEfXc8P6sD+VH246adCjqYXHSZMKs+zapc70jiThqhneHVkeG9nrt dPaqmY3NCt8DaCw7tYWODIBX6aCx//uC2Q1l7rqPUAXxzn04MY+YYL1T61O30Htq dXszfLTH/HouzVq4IMX47E+pZvIxvdjA4mVyMzvh4f/Oeu+jB3PFrzSCVX66Vtdp dGR75Gl1rdHkWRmZrkbILDj9S3VlQfIpLSSsAJWwOsYPSNVxgkQ= =pl/5 -----END PGP SIGNATURE----- Merge tag 'fsi-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next Joel writes: FSI changes for 5.10 - Misc code cleanups. Thanks to Colin, Xu and Rikard - Features for the ASPEED FSI master * Detect connection type and routing for Tacoma * Run at full speed (200MHz) by default * Set bus speed with a parameter * CFAM reset GPIO * 23 bit addressing - Core features * Disable unused links * Set LBUS ownership * tag 'fsi-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi: fsi: aspeed: Support CFAM reset GPIO fsi: aspeed: Add module param for bus divisor fsi: aspeed: Run the bus at maximum speed fsi: aspeed: Support cabled FSI dt-bindings: fsi: Document gpios fsi: scom: Constify scom_ids fsi: sbefifo: Constify sbefifo_ids fsi: master: Constify hub_master_ids fsi: master: Remove link enable read-back fsi: core: Set slave local bus ownership during init fsi: core: Disable link when slave init fails fsi: master: Add boolean parameter to link_enable function fsi: fsi-occ: fix return value check in occ_probe() fsi: aspeed: Enable 23-bit addressing fsi: master-ast-cf: fix spelling mistake "firwmare" -> "firmware" |
||
Vinod Koul
|
4c80e93239 |
Linux 5.9-rc4
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9VerweHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhc4H/iHD6qLdB36gZB6K oc2nJyrqyWitv4ti2Mnt5PA7o4wX4l6nnr1QvoaJ4BRs5Ja1czRvb2XDmdzqAoIA xITGoafqaAeDfxQ91bWrJsVN0pCRKiGwddXlU7TWmqw/riAkfOqi6GYKvav4biJH +n1mUPQb1M2IbRFsqkAS+ebKHq3CWaRvzKOEneS88nGlL5u31S9NAru8Ru/fkxRn 6CwGcs1XRaBPYaZAhdfIb0NuatUlpkhPC9yhNS9up6SqrWmK3m65vmFVng6H0eCF fwn1jVztboY/XcNAi5sM9ExpQCql6WLQEEktVikqRDojC8fVtSx6W55tPt7qeaoO Z6t4/DA= =bcA4 -----END PGP SIGNATURE----- Merge tag 'v5.9-rc4' into next Linux 5.9-rc4 |
||
|
Xu Yilun
|
9ba3a0aa09 |
fpga: dfl: create a dfl bus type to support DFL devices
A new bus type "dfl" is introduced for private features which are not initialized by DFL feature drivers (dfl-fme & dfl-afu drivers). So these private features could be handled by separate driver modules. DFL feature drivers (dfl-fme, dfl-port) will create DFL devices on enumeration. DFL drivers could be registered on this bus to match these DFL devices. They are matched by dfl type & feature_id. [mdf@kernel.org: Add missing Documentation part to MAINTAINERS file] Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Acked-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Moritz Fischer <mdf@kernel.org> |
||
Joel Stanley
|
4a851d714e |
fsi: aspeed: Support CFAM reset GPIO
Systems have a line for restting the remote CFAM. This is not part of the FSI master, but is associated with it, so it makes sense to include it in the master driver. This exposes a sysfs interface to reset the cfam, abstracting away the direction and polarity of the GPIO, as well as the timing of the reset pulse. Userspace will be blocked until the reset pulse is finished. The reset is hard coded to be in the range of (900, 1000) us. It was observed with a scope to regularly be just over 1ms. If the device tree property is not preset the driver will silently continue. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20200728025527.174503-6-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au> |
||
Alexandru Tachici
|
02a019ff7d |
iio: accel: adxl372: Add additional trigger ABI docs
Document use of additional trigger supplied by driver. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20200810093257.65929-3-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Gwendal Grignou
|
3b0028bd0f |
docs: abi: iio: Use What: consistently
Change "[w|W]hat[:| ]" to What: for consistency. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20200828233156.2264689-2-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Christian Eggers
|
3c3006f5fc |
iio: documentation: light: Add as73211 sysfs documentation
The driver for the as73211 light sensor provides the following not yet documented sysfs entries: - in_intensity_(x|y|z)_raw - in_intensity_(x|y|z)_scale - in_intensity_sampling_frequency(_available) - in_intensity_hardwaregain(_available) - in_intensity_integration_time Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Ahmad Fatoum
|
75caa303d7 |
Documentation: ABI: iio: fix some spelling mistakes
This fixes some typos found while browsing the documentation. Cc: trivial@kernel.org Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Eugene Zaikonnikov
|
0115a63c99 |
iio: humidity: Add TI HDC20x0 support
Add driver support for HDC2010/2080 series devices and sysfs documentation for their heater element. HDC2010 is an integrated high-accuracy humidity and temperature sensor with very low power consumption. The device includes a resistive heating element. The temperature range is -40C to 125C with 0.2C accuracy. Humidity measurement is 0 to 100% with 2% RH accuracy. Signed-off-by: Eugene Zaikonnikov <ez@norphonic.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Dave Jiang
|
ff18de55a6 |
dmaengine: idxd: add command status to idxd sysfs attribute
Export admin command status to sysfs attribute in order to allow user to retrieve configuration error. Allows user tooling to retrieve the command error and provide more user friendly error messages. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/159865278770.29455.8026892329182750127.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Dave Jiang
|
e7184b159d |
dmaengine: idxd: add support for configurable max wq batch size
Add sysfs attribute max_batch_size to wq in order to allow the max batch size configured on a per wq basis. Add support code to configure the valid user input on wq enable. This is a performance tuning parameter. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/159865273617.29141.4383066301730821749.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Dave Jiang
|
d7aad5550e |
dmaengine: idxd: add support for configurable max wq xfer size
Add sysfs attribute max_xfer_size to wq in order to allow the max xfer size configured on a per wq basis. Add support code to configure the valid user input on wq enable. This is a performance tuning parameter. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/159865265404.29141.3049399618578194052.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
Jason Gunthorpe
|
6989aa62d3 |
Linux 5.9-rc3
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9ML+IeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGA8EIAIy/kTbFS0yrE9yV hb98oX0z9+EU9YQg9vhaRWwPd+rJF/JMQZLqYcwbhjG9abaUL3T3fEcSAefMHw8E LAt+hYzA38dHt7tqhsFQX3vV1VorvDVICBVN0yRPRWKKikq4OPIHzaAR9tleGAF5 8btQisl1PjN+obwYmLuNb6aX16OCwAF+uXOwehcoJs9dvMNhwtXRzfOflWzOvOo6 tE0bHErlylLDfLv4ZzEfczTdks4QJZ7C0xLSf3oN9AAynW42Xnhct4hi8qZY/hCf CMaqeN4hdpub6TvQIqBdDqMMjEXGFgeNSnAEBQY9VpvUqz8NTu6sQxwgJEKDF5tg d81lv2c= =uW/F -----END PGP SIGNATURE----- Merge tag 'v5.9-rc3' into rdma.git for-next Required due to dependencies in following patches. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Greg Kroah-Hartman
|
dd5597245d |
Merge 5.9-rc3 into char-misc-next
We need the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Subbaraman Narayanamurthy
|
5ca937fb5d |
power: supply: add wireless type
Currently, power_supply framework supports only Battery, UPS, Mains and USB power_supply_type. Add wireless power_supply_type so that the drivers which supports wireless can register a power supply class device with POWER_SUPPLY_TYPE_WIRELESS. Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> |
||
Matt Ranostay
|
4ffa22fd22 |
iio: add IIO_MOD_O2 modifier
Add modifier IIO_MOD_O2 for O2 concentration reporting Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Kajol Jain
|
64ef8f2c47 |
powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
Commit |
||
|
Jason Gunthorpe
|
c0f4979e90 |
RDMA/cm: Remove unused cm_class
Previous commits removed all references to the /sys/class/infiniband_cm/
directory represented by the cm_class symbol. Remove the directory and
cm_class.
Fixes:
|
||
Alexander Usyskin
|
2dd1e5ae8c |
mei: add vtag support bit in client properties
Vtag support is on a client basis, meaning not every client supports it. The vtag capability is communicated via the client properties structure during client enumeration process. Export the propertiy via sysfs. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200818115147.2567012-4-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Linus Torvalds
|
4bf5e36118 |
libnvdimm for 5.9
- Add 'Runtime Firmware Activation' support for NVDIMMs that advertise
the relevant capability
- Misc libnvdimm and DAX cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQT9vPEBxh63bwxRYEEPzq5USduLdgUCXzHodgAKCRAPzq5USduL
djTjAQD1THDmizHn16zd94ueygh/BXfN0zyeVvQH352ol7kdfQEAj2A7YJ9XBbBY
JC6/CNd+OiB9W88lLOUf3Waj1a7cUQ8=
=Q6qn
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updayes from Vishal Verma:
"You'd normally receive this pull request from Dan Williams, but he's
busy watching a newborn (Congrats Dan!), so I'm watching libnvdimm
this cycle.
This adds a new feature in libnvdimm - 'Runtime Firmware Activation',
and a few small cleanups and fixes in libnvdimm and DAX. I'd
originally intended to make separate topic-based pull requests - one
for libnvdimm, and one for DAX, but some of the DAX material fell out
since it wasn't quite ready.
Summary:
- add 'Runtime Firmware Activation' support for NVDIMMs that
advertise the relevant capability
- misc libnvdimm and DAX cleanups"
* tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/security: ensure sysfs poll thread woke up and fetch updated attr
libnvdimm/security: the 'security' attr never show 'overwrite' state
libnvdimm/security: fix a typo
ACPI: NFIT: Fix ARS zero-sized allocation
dax: Fix incorrect argument passed to xas_set_err()
ACPI: NFIT: Add runtime firmware activate support
PM, libnvdimm: Add runtime firmware activation support
libnvdimm: Convert to DEVICE_ATTR_ADMIN_RO()
drivers/dax: Expand lock scope to cover the use of addresses
fs/dax: Remove unused size parameter
dax: print error message by pr_info() in __generic_fsdax_supported()
driver-core: Introduce DEVICE_ATTR_ADMIN_{RO,RW}
tools/testing/nvdimm: Emulate firmware activation commands
tools/testing/nvdimm: Prepare nfit_ctl_test() for ND_CMD_CALL emulation
tools/testing/nvdimm: Add command debug messages
tools/testing/nvdimm: Cleanup dimm index passing
ACPI: NFIT: Define runtime firmware activation commands
ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptor
libnvdimm: Validate command family indices
|
||
|
Linus Torvalds
|
086ba2ec16 |
f2fs-for-5.9-rc1
In this round, we've added two small interfaces, 1) GC_URGENT_LOW mode for performance, and 2) F2FS_IOC_SEC_TRIM_FILE ioctl for security. The new GC mode allows Android to run some lower priority GCs in background, while new ioctl discards user information without race condition when the account is removed. In addition, some patches were merged to address latency-related issues. We've fixed some compression-related bug fixes as well as edge race conditions. Enhancement: - add GC_URGENT_LOW mode in gc_urgent - introduce F2FS_IOC_SEC_TRIM_FILE ioctl - bypass racy readahead to improve read latencies - shrink node_write lock coverage to avoid long latency Bug fix: - fix missing compression flag control, i_size, and mount option - fix deadlock between quota writes and checkpoint - remove inode eviction path in synchronous path to avoid deadlock - fix to wait GCed compressed page writeback - fix a kernel panic in f2fs_is_compressed_page - check page dirty status before writeback - wait page writeback before update in node page write flow - fix a race condition between f2fs_write_end_io and f2fs_del_fsync_node_entry We've added some minor sanity checks and refactored trivial code blocks for better readability and debugging information. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAl8xhqMACgkQQBSofoJI UNLYgA//WMoOqBACDuOWwYmgQ8oq4vrH2LOwssZF9/77vEfaHKc+TSq1il54lcUl MPEx7FK54CnfT8VLLR5ByobZFyH9FFeAw4FN4LBhcfE8jh8ysAGjeoZjwfcmJF6R cVKtn8ltUpgH3IEUuPjTiKkVNHfVJxuuL3zHbg1CEl+AkR6NJ/U9kNLwf7ZgPWq2 I0qwyXRlUIEChhyPZB+Y6RsdGjkeievKld56DMCgG73f4yHRO/yBcrfsN875sGdM ALL+mYiunMT6aXcfoiQiAjeImoNajuflI6Zso2Sk8Vl6sBj0QwAuEBF5x1Z5e1mt YVYNuC4ucqsDBKpOqtsPP0MFTC2T5Rr9wWXjqv+9TjN7zvJ8xx+zDWtQxvI2bpqB 4ZRxaJP45aThLYh/SEYDmj+ppyPtfLDeG0HzUkwMmuopf9eg+kxGPjBsZewgkCKg kmMKU0P7deGlkrWLUcz2vm0Lso+ieGm0IeLOQl9/rOLu3IQQFia0Vla7dLDgqF0P sz+udIiBztC3JPEmEZhfayA6P6e1TyWQUdquL08jp+DZD17gPqcaZDhHr62U5rmK 7zoiZqkR03SbNaFhBhhoVOaAVcAnF0pSIgqzkCa3dVXxp1QV+JfD9CGR9NFyiIqB HK5RPFskIUCg0K2LSaAKbyoFWa/fJ8ZD8/CbFWcnXfWzoaaSkmc= =PjaF -----END PGP SIGNATURE----- Merge tag 'f2fs-for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've added two small interfaces: (a) GC_URGENT_LOW mode for performance and (b) F2FS_IOC_SEC_TRIM_FILE ioctl for security. The new GC mode allows Android to run some lower priority GCs in background, while new ioctl discards user information without race condition when the account is removed. In addition, some patches were merged to address latency-related issues. We've fixed some compression-related bug fixes as well as edge race conditions. Enhancements: - add GC_URGENT_LOW mode in gc_urgent - introduce F2FS_IOC_SEC_TRIM_FILE ioctl - bypass racy readahead to improve read latencies - shrink node_write lock coverage to avoid long latency Bug fixes: - fix missing compression flag control, i_size, and mount option - fix deadlock between quota writes and checkpoint - remove inode eviction path in synchronous path to avoid deadlock - fix to wait GCed compressed page writeback - fix a kernel panic in f2fs_is_compressed_page - check page dirty status before writeback - wait page writeback before update in node page write flow - fix a race condition between f2fs_write_end_io and f2fs_del_fsync_node_entry We've added some minor sanity checks and refactored trivial code blocks for better readability and debugging information" * tag 'f2fs-for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits) f2fs: prepare a waiter before entering io_schedule f2fs: update_sit_entry: Make the judgment condition of f2fs_bug_on more intuitive f2fs: replace test_and_set/clear_bit() with set/clear_bit() f2fs: make file immutable even if releasing zero compression block f2fs: compress: disable compression mount option if compression is off f2fs: compress: add sanity check during compressed cluster read f2fs: use macro instead of f2fs verity version f2fs: fix deadlock between quota writes and checkpoint f2fs: correct comment of f2fs_exist_written_data f2fs: compress: delay temp page allocation f2fs: compress: fix to update isize when overwriting compressed file f2fs: space related cleanup f2fs: fix use-after-free issue f2fs: Change the type of f2fs_flush_inline_data() to void f2fs: add F2FS_IOC_SEC_TRIM_FILE ioctl f2fs: should avoid inode eviction in synchronous path f2fs: segment.h: delete a duplicated word f2fs: compress: fix to avoid memory leak on cc->cpages f2fs: use generic names for generic ioctls f2fs: don't keep meta inode pages used for compressed block migration ... |
||
|
Linus Torvalds
|
4bcf69e570 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - an update to Elan touchpad controller driver supporting newer ICs with enhanced precision reports and a new firmware update process - an update to EXC3000 touch controller supporting additional parts - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: exc3000 - add support to query model and fw_version Input: exc3000 - add reset gpio support Input: exc3000 - add EXC80H60 and EXC80H84 support dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Input: sentelic - fix error return when fsp_reg_write fails Input: alps - remove redundant assignment to variable ret Input: ims-pcu - return error code rather than -ENOMEM Input: elan_i2c - add ic type 0x15 Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Input: uinput - fix typo in function name documentation Input: ati_remote2 - add missing newlines when printing module parameters Input: psmouse - add a newline when printing 'proto' by sysfs Input: synaptics-rmi4 - drop a duplicated word Input: elan_i2c - add support for high resolution reports Input: elan_i2c - do not constantly re-query pattern ID Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14 Input: elan_i2c - handle firmware updated on newer ICs Input: elan_i2c - add support for different firmware page sizes Input: elan_i2c - fix detecting IAP version on older controllers Input: elan_i2c - handle devices with patterns above 1 ... |
||
|
Linus Torvalds
|
449dc8c970 |
power supply and reset changes for the v5.9 series
power-supply core: * add COOL/WARM/HOT state from JEITA JISC8712:2015 specification * convert simple-battery DT binding to YAML * add long-life charging mode battery/charger drivers: * bq25150: new charger driver * bq27xxx: add support for BQ27z561 and BQ28z610 * max17040: support CAPACITY_ALERT_MIN * sbs-battery: add PEC support * wilco-ec: support long-life charging mode * bq25890: fix DT binding * misc. fixes and cleanups reset drivers: * linkstation: new reset driver -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAl8rMawACgkQ2O7X88g7 +prspw/8CkZiTCl+tnaVdWNvzSQjalKjKeYegKlEolwfZjSQIokeLfz8KSqN2R8q t+TTEJLuO+Y7ZRlpR+inD3UbeAI4XUL9PE8ZwrKycpwUbwIsjICZT5XEbDCjkyIo tXBsB4ainkGy4SD2Yn1/tMQB+S4blqiz7ryhii1OWI8+MMLfR25m0cQQDMm1VlAn WgWza/wRTX+7NpCPSoHkMN4lk2hZz4Ai7X+z8W7TtId91gk+1vQBGOllinG9yd5F bik6Q2qBgHP8ICB6p+9YUenozvvFfEK79euMW99YnZM91DCb0v0YSDm56wIpV58r JGDXN2pHeYxjuDM6pXMbQV31u/NbMKSHMolBYdAtPbxPMS7iHefgoPYUOZDamRte ovjW+pXhEyKkFORp61rwwza3EDBBdKsF2C8OVGywAK8kOZ2y0a6wPEre62Dq2r3U A6eYT+UD+EYV9eunX6Nvx45hi/Vl3R35vJGhU+M77N5YcpW1jSJxWVZJ5AlbwDQK +6Di8GUYrZLZ17+z0bkF8RKnJlfHPVcrvbKty/ePtyYW/DgDpwH9/QQWPIF7BbMG f5csOE5A/MWIENeOWClYtKGMjxzTrKZ5BbjPWYzSo+Gw36fM5pCB1rG6/s+kmGM3 HeGyWMr5fe4eoRBTcM/LFqyM8C1wYXGIMd8u65/RsYh592fgfgw= =SWyv -----END PGP SIGNATURE----- Merge tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - add COOL/WARM/HOT state from JEITA JISC8712:2015 specification - convert simple-battery DT binding to YAML - add long-life charging mode Battery/charger drivers: - bq25150: new charger driver - bq27xxx: add support for BQ27z561 and BQ28z610 - max17040: support CAPACITY_ALERT_MIN - sbs-battery: add PEC support - wilco-ec: support long-life charging mode - bq25890: fix DT binding - misc. fixes and cleanups Reset drivers: - linkstation: new reset driver" * tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits) power: supply: wilco_ec: Add long life charging mode power: supply: bq27xxx_battery: Add the BQ28z610 Battery monitor dt-bindings: power: Add BQ28z610 compatible power: supply: bq27xxx_battery: Add the BQ27Z561 Battery monitor dt-bindings: power: Add BQ27Z561 compatible power: supply: test_power: Fix battery_current initial value power: supply: Fix kerneldoc of power_supply_temp2resist_simple() power: supply: cpcap-battery: Fix kerneldoc of cpcap_battery_read_accumulated() dt-bindings: power: Convert battery.txt to battery.yaml power: supply: rt5033_battery: Fix error code in rt5033_battery_probe() power: supply: max17040: Add POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN power: supply: check if calc_soc succeeded in pm860x_init_battery power: supply: bq2xxxx: Replace HTTP links with HTTPS ones power: reset: add driver for LinkStation power off power: supply: sc27xx: prevent adc * 1000 from overflow math64: New DIV_S64_ROUND_CLOSEST helper power: fix duplicated words in bq2415x_charger.h power: Convert to DEFINE_SHOW_ATTRIBUTE power: reset: keystone-reset: Replace HTTP links with HTTPS ones power: supply: bq25150 introduce the bq25150 ... |
||
|
Linus Torvalds
|
ce615f5c1f |
dmaengine updates for v5.9-rc1
Core: - Support out of order dma completion - Support for repeating transaction New controllers: - Support for Actions S700 DMA engine - Renesas R8A774E1, r8a7742 controller binding - New driver for Xilinx DPDMA controller Others: - Support of out of order dma completion in idxd driver - W=1 warning cleanup of subsystem - Updates to ti-k3-dma, dw, idxd drivers -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl8s6voACgkQfBQHDyUj g0f7Aw/+NjqyWAMZ4WpP6p2AN+5Evs7MY0fhhJMkU7ShbQlBM1GKrrNpMhaOaMw2 KB7xWvsfMnpKhxcq5LL2ymMnzJgJHVi0Zp9aRwNQXmJfHyCTDoqv54ljd5ADaL/O XLBLBWc6h5WbAsWmpiovb/EQ58RAU/bvlPD7gntK9Y8n5ha32c+jFnOg+Fd3uINl x9uSHKUOWFVRvIJgOrFcFwl2eT0erFcme7WyCWuNfSFDZlJqOdfVf1TfTVcfyAYY 8r6VWPOyiAc97SPN1hVYMUqqTtRAEDlsPRfeyvUm2pnRJnbyJdHbvbA0l/OMvzH5 3q5SBXz6NgoZsO6GPiSEV679K0nsuZOCqfevNb6+UQUrO7f5JyEbwGTrWju6F3fg UVTENto8XW7KCE+oTkJBgZ6utbDtK5dpoKghX59lN3nKogqzGi3JUlgTtlSIF+AY CnmESWM37f1jw1Ew58gmSYRFfKQV2fLwcAePnaV4HaNV70uFoYnhPvVenSvgYeky 24D8O5fzzhRHsSqUPTLTZ/u4cGJtOiBzQWdWcUXig/mfHKpu9i4nejHmuA2x64l0 oFc3nKwd7XrGVg2l4XMx1T0x69+1dlc0eEkZ7lRGzZgDCMKeHEsLOBGaid+bMO09 4IMzxoQxINui6l8csX5ctbRdXfUFZKZaZU36RxQeysidLE6QDGk= =OfZv -----END PGP SIGNATURE----- Merge tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Core: - Support out of order dma completion - Support for repeating transaction New controllers: - Support for Actions S700 DMA engine - Renesas R8A774E1, r8a7742 controller binding - New driver for Xilinx DPDMA controller Other: - Support of out of order dma completion in idxd driver - W=1 warning cleanup of subsystem - Updates to ti-k3-dma, dw, idxd drivers" * tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (68 commits) dmaengine: dw: Don't include unneeded header to platform data header dmaengine: Actions: Add support for S700 DMA engine dmaengine: Actions: get rid of bit fields from dma descriptor dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml dmaengine: idxd: add missing invalid flags field to completion dmaengine: dw: Initialize max_sg_burst capability dmaengine: dw: Introduce max burst length hw config dmaengine: dw: Initialize min and max burst DMA device capability dmaengine: dw: Set DMA device max segment size parameter dmaengine: dw: Take HC_LLP flag into account for noLLP auto-config dmaengine: Introduce DMA-device device_caps callback dmaengine: Introduce max SG burst capability dmaengine: Introduce min burst length capability dt-bindings: dma: dw: Add max burst transaction length property dt-bindings: dma: dw: Convert DW DMAC to DT binding dmaengine: ti: k3-udma: Query throughput level information from hardware dmaengine: ti: k3-udma: Use defines for capabilities register parsing dmaengine: xilinx: dpdma: Fix kerneldoc warning dmaengine: xilinx: dpdma: add missing kernel doc dmaengine: xilinx: dpdma: remove comparison of unsigned expression ... |
||
|
Linus Torvalds
|
25d8d4eeca |
powerpc updates for 5.9
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on Power9
or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be unsupported on
Power10 and future processors, leaving us with no way to implement the
functionality it requests. This risks breaking userspace, though we believe
it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion checking.
We now allow stack expansion up to the rlimit, like other architectures.
- Remove the remnants of our (previously disabled) topology update code, which
tried to react to NUMA layout changes on virtualised systems, but was prone
to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link stack
(branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as usual.
Thanks to:
Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey Kardashevskiy,
Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton
Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan S, Bharata B Rao, Bill
Wendling, Bin Meng, Cédric Le Goater, Chris Packham, Christophe Leroy,
Christoph Hellwig, Daniel Axtens, Dan Williams, David Lamparter, Desnes A.
Nunes do Rosario, Erhard F., Finn Thain, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geoff Levand, Greg Kurz, Gustavo A. R. Silva, Hari Bathini,
Harish, Imre Kaloz, Joel Stanley, Joe Perches, John Crispin, Jordan Niethe,
Kajol Jain, Kamalesh Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li
RongQing, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal
Suchanek, Milton Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver
O'Halloran, Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe
Bergheaud, Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar Dronamraju,
Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza Cascardo, Thiago Jung
Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov, Wei Yongjun, Wen Xiong,
YueHaibing.
-----BEGIN PGP SIGNATURE-----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=QMY1
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on
Power9 or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be
unsupported on Power10 and future processors, leaving us with no way
to implement the functionality it requests. This risks breaking
userspace, though we believe it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion
checking. We now allow stack expansion up to the rlimit, like other
architectures.
- Remove the remnants of our (previously disabled) topology update
code, which tried to react to NUMA layout changes on virtualised
systems, but was prone to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link
stack (branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as
usual.
Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey
Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan
S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris
Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan
Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn
Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand,
Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel
Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh
Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton
Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran,
Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud,
Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar
Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza
Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov,
Wei Yongjun, Wen Xiong, YueHaibing.
* tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits)
selftests/powerpc: Fix pkey syscall redefinitions
powerpc: Fix circular dependency between percpu.h and mmu.h
powerpc/powernv/sriov: Fix use of uninitialised variable
selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs
powerpc/40x: Fix assembler warning about r0
powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
cpuidle: pseries: Fixup exit latency for CEDE(0)
cpuidle: pseries: Add function to parse extended CEDE records
cpuidle: pseries: Set the latency-hint before entering CEDE
selftests/powerpc: Fix online CPU selection
powerpc/perf: Consolidate perf_callchain_user_[64|32]()
powerpc/pseries/hotplug-cpu: Remove double free in error path
powerpc/pseries/mobility: Add pr_debug() for device tree changes
powerpc/pseries/mobility: Set pr_fmt()
powerpc/cacheinfo: Warn if cache object chain becomes unordered
powerpc/cacheinfo: Improve diagnostics about malformed cache lists
powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages
powerpc/cacheinfo: Set pr_fmt()
powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
...
|
||
|
Sebastian Reichel
|
d862a3068e |
Input: exc3000 - add support to query model and fw_version
Expose model and fw_version via sysfs. Also query the model in probe to make sure, that the I2C communication with the device works before successfully probing the driver. This is a bit complicated, since EETI devices do not have a sync interface. Sending the commands and directly reading does not work. Sending the command and waiting for some time is also not an option, since there might be touch events in the mean time. Last but not least we do not cache the results, since this interface can be used to check the I2C communication is still working as expected. Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20200805160520.456570-5-sebastian.reichel@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> |
||
|
Linus Torvalds
|
dfdf16ecfd |
SCSI misc on 20200806
This series consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a huge docbook fix update like most other subsystems and no major update to the core (the few non trivial updates are either minor fixes or removing an unused feature [scsi_sdb_cache]). Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXyxq1yYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSoAAQChZ4i8 ZqYW3pL33JO3fA8vdjvLuyC489Hj4wzIsl3/bQEAxYyM6BSLvMoLWR2Plq/JmTLm 4W/LDptarpTiDI3NuDc= =4b0W -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a huge docbook fix update like most other subsystems and no major update to the core (the few non trivial updates are either minor fixes or removing an unused feature [scsi_sdb_cache])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits) scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM" scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged scsi: scsi_debug: Implement tur_ms_to_ready parameter scsi: scsi_debug: Fix request sense scsi: lpfc: Fix typo in comment for ULP scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC scsi: iscsi: Do not put host in iscsi_set_flashnode_param() scsi: hpsa: Correct ctrl queue depth scsi: target: tcmu: Make TMR notification optional scsi: target: tcmu: Implement tmr_notify callback scsi: target: tcmu: Fix and simplify timeout handling scsi: target: tcmu: Factor out new helper ring_insert_padding scsi: target: tcmu: Do not queue aborted commands scsi: target: tcmu: Use priv pointer in se_cmd scsi: target: Add tmr_notify backend function scsi: target: Modify core_tmr_abort_task() scsi: target: iscsi: Fix inconsistent debug message scsi: target: iscsi: Fix login error when receiving ... |
||
|
Linus Torvalds
|
c0c419c045 |
Staging/IIO driver patches for 5.9-rc1
Here is the large set of Staging and IIO driver patches for 5.9-rc1. Lots of churn here, but overall the size increase in lines added is small, while adding a load of new IIO drivers. Major things in here: - lots and lots of IIO new drivers and frameworks added - IIO driver fixes and updates - lots of tiny coding style cleanups for staging drivers - vc04_services major reworks and cleanups We had 3 set of drivers move out of staging in this round as well: - wilc1000 wireless driver moved out of staging - speakup moved out of staging - most USB driver moved out of staging Full details are in the shortlog. All of these have been in linux-next with no reported issues. The last few changes here were to resolve reported linux-next issues, and they seem to have resolved the problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXyv2rA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yngIgCfZOVj022X+paV81NwvO/TroMDA7oAn1C4XCmY Fxz55oHIyk9lbQxsDhID =ujqG -----END PGP SIGNATURE----- Merge tag 'staging-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver updates from Greg KH: "Here is the large set of Staging and IIO driver patches for 5.9-rc1. Lots of churn here, but overall the size increase in lines added is small, while adding a load of new IIO drivers. Major things in here: - lots and lots of IIO new drivers and frameworks added - IIO driver fixes and updates - lots of tiny coding style cleanups for staging drivers - vc04_services major reworks and cleanups We had 3 set of drivers move out of staging in this round as well: - wilc1000 wireless driver moved out of staging - speakup moved out of staging - most USB driver moved out of staging Full details are in the shortlog. All of these have been in linux-next with no reported issues. The last few changes here were to resolve reported linux-next issues, and they seem to have resolved the problems" * tag 'staging-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (428 commits) staging: most: fix up movement of USB driver staging: rts5208: clear alignment style issues staging: r8188eu: replace rtw_netdev_priv define with inline function staging: netlogic: clear alignment style issues staging: android: ashmem: Fix lockdep warning for write operation drivers: most: add USB adapter driver staging: most: Use %pM format specifier for MAC addresses staging: ks7010: Use %pM format specifier for MAC addresses staging: qlge: qlge_dbg: removed comment repition staging: wfx: Use flex_array_size() helper in memcpy() staging: rtl8723bs: Align macro definitions staging: rtl8723bs: Clean up function declations staging: rtl8723bs: Fix coding style errors drivers: staging: audio: Fix the missing header file for helper file staging: greybus: audio: Enable GB codec, audio module compilation. staging: greybus: audio: Add helper APIs for dynamic audio modules staging: greybus: audio: Resolve compilation error in topology parser staging: greybus: audio: Resolve compilation errors for GB codec module staging: greybus: audio: Maintain jack list within GB Audio module staging: greybus: audio: Update snd_jack FW usage as per new APIs ... |
||
|
Linus Torvalds
|
e4a7b2dc35 |
LEDs changes for 5.9-rc1.
Okay, so... this one is interesting. RGB LEDs are very common, and we need to have some kind of support for them. Multicolor is for arbitrary set of LEDs in one package, RGB is for LEDs that can produce full range of colors. We do not have real multicolor LED that is not RGB in the pipeline, so that one is disabled for now. You can expect this saga to continue with next pull requests. -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQRPfPO7r0eAhk010v0w5/Bqldv68gUCXyskqQAKCRAw5/Bqldv6 8ge0AJ9JRTa/0Xkl7JuKUpC93jAnvjpK+ACgsDijb77H5zmtwC8xa0kXiDsbh3E= =aSJX -----END PGP SIGNATURE----- Merge tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "Okay, so... this one is interesting. RGB LEDs are very common, and we need to have some kind of support for them. Multicolor is for arbitrary set of LEDs in one package, RGB is for LEDs that can produce full range of colors. We do not have real multicolor LED that is not RGB in the pipeline, so that one is disabled for now. You can expect this saga to continue with next pull requests" * tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (37 commits) MAINTAINERS: Remove myself as LED subsystem maintainer leds: disallow /sys/class/leds/*:multi:* for now leds: add RGB color option, as that is different from multicolor. Make LEDS_LP55XX_COMMON depend on I2C to fix build errors: Documentation: ABI: leds-turris-omnia: document sysfs attribute leds: initial support for Turris Omnia LEDs dt-bindings: leds: add cznic,turris-omnia-leds binding leds: pattern trigger -- check pattern for validity leds: Replace HTTP links with HTTPS ones leds: trigger: add support for LED-private device triggers leds: lp5521: Add multicolor framework multicolor brightness support leds: lp5523: Update the lp5523 code to add multicolor brightness function leds: lp55xx: Add multicolor framework support to lp55xx leds: lp55xx: Convert LED class registration to devm_* dt-bindings: leds: Convert leds-lp55xx to yaml leds: multicolor: Introduce a multicolor class definition leds: Add multicolor ID to the color ID list dt: bindings: Add multicolor class dt bindings documention leds: lp5523: Fix various formatting issues in the code leds: lp55xx: Fix file permissions to use DEVICE_ATTR macros ... |
||
|
Linus Torvalds
|
ecfd7940b8 |
USB/Thunderbolt patches for 5.9-rc1
Here is the large set of USB and Thunderbolt patches for 5.9-rc1. Nothing really magic/major in here, just lots of little changes and updates: - clean up language usages in USB core and some drivers - Thunderbolt driver updates and additions - USB Gadget driver updates - dwc3 driver updates (like always...) - build with "W=1" warning fixups - mtu3 driver updates - usb-serial driver updates and device ids - typec additions and updates for new hardware - xhci debug code updates for future platforms - cdns3 driver updates - lots of other minor driver updates and fixes and cleanups All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXymciA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylVVwCfU7JxgjFhAJTzC9K5efVqsrSHzxQAnijHrqUn pHgI9M1ZRVGwmv2RNWb3 =9/8I -----END PGP SIGNATURE----- Merge tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the large set of USB and Thunderbolt patches for 5.9-rc1. Nothing really magic/major in here, just lots of little changes and updates: - clean up language usages in USB core and some drivers - Thunderbolt driver updates and additions - USB Gadget driver updates - dwc3 driver updates (like always...) - build with "W=1" warning fixups - mtu3 driver updates - usb-serial driver updates and device ids - typec additions and updates for new hardware - xhci debug code updates for future platforms - cdns3 driver updates - lots of other minor driver updates and fixes and cleanups All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (330 commits) usb: common: usb-conn-gpio: Register charger usb: mtu3: simplify mtu3_req_complete() usb: mtu3: clear dual mode of u3port when disable device usb: mtu3: use MTU3_EP_WEDGE flag usb: mtu3: remove useless member @busy in mtu3_ep struct usb: mtu3: remove repeated error log usb: mtu3: add ->udc_set_speed() usb: mtu3: introduce a funtion to check maximum speed usb: mtu3: clear interrupts status when disable interrupts usb: mtu3: reinitialize CSR registers usb: mtu3: fix macro for maximum number of packets usb: mtu3: remove unnecessary pointer checks usb: xhci: Fix ASMedia ASM1142 DMA addressing usb: xhci: define IDs for various ASMedia host controllers usb: musb: convert to devm_platform_ioremap_resource_byname usb: gadget: tegra-xudc: convert to devm_platform_ioremap_resource_byname usb: gadget: r8a66597: convert to devm_platform_ioremap_resource_byname usb: dwc3: convert to devm_platform_ioremap_resource_byname usb: cdns3: convert to devm_platform_ioremap_resource_byname usb: phy: am335x: convert to devm_platform_ioremap_resource_byname ... |
||
|
Linus Torvalds
|
dd27111e32 |
Driver core changes for 5.9-rc1
Here is the "big" set of changes to the driver core, and some drivers
using the changes, for 5.9-rc1.
"Biggest" thing in here is the device link exposure in sysfs, to help
to tame the madness that is SoC device tree representations and driver
interactions with it.
Other stuff in here that is interesting is:
- device probe log helper so that drivers can report problems in
a unified way easier.
- devres functions added
- DEVICE_ATTR_ADMIN_* macro added to make it harder to write
incorrect sysfs file permissions
- documentation cleanups
- ability for debugfs to be present in the kernel, yet not
exposed to userspace. Needed for systems that want it
enabled, but do not trust users, so they can still use some
kernel functions that were otherwise disabled.
- other minor fixes and cleanups
The patches outside of drivers/base/ all have acks from the respective
subsystem maintainers to go through this tree instead of theirs.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylhOQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylGdACeKqxm8IIDZycj0QjLUlPiEwVIROgAnjpf5jAB
mb4jMvgEGsB6/FwxypPG
=RUss
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of changes to the driver core, and some drivers
using the changes, for 5.9-rc1.
"Biggest" thing in here is the device link exposure in sysfs, to help
to tame the madness that is SoC device tree representations and driver
interactions with it.
Other stuff in here that is interesting is:
- device probe log helper so that drivers can report problems in a
unified way easier.
- devres functions added
- DEVICE_ATTR_ADMIN_* macro added to make it harder to write
incorrect sysfs file permissions
- documentation cleanups
- ability for debugfs to be present in the kernel, yet not exposed to
userspace. Needed for systems that want it enabled, but do not
trust users, so they can still use some kernel functions that were
otherwise disabled.
- other minor fixes and cleanups
The patches outside of drivers/base/ all have acks from the respective
subsystem maintainers to go through this tree instead of theirs.
All of these have been in linux-next with no reported issues"
* tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits)
drm/bridge: lvds-codec: simplify error handling
drm/bridge/sii8620: fix resource acquisition error handling
driver core: add deferring probe reason to devices_deferred property
driver core: add device probe log helper
driver core: Avoid binding drivers to dead devices
Revert "test_firmware: Test platform fw loading on non-EFI systems"
firmware_loader: EFI firmware loader must handle pre-allocated buffer
selftest/firmware: Add selftest timeout in settings
test_firmware: Test platform fw loading on non-EFI systems
driver core: Change delimiter in devlink device's name to "--"
debugfs: Add access restriction option
tracefs: Remove unnecessary debug_fs checks.
driver core: Fix probe_count imbalance in really_probe()
kobject: remove unused KOBJ_MAX action
driver core: Fix sleeping in invalid context during device link deletion
driver core: Add waiting_for_supplier sysfs file for devices
driver core: Add state_synced sysfs file for devices that support it
driver core: Expose device link details in sysfs
driver core: Drop mention of obsolete bus rwsem from kernel-doc
debugfs: file: Remove unnecessary cast in kfree()
...
|
||
|
Linus Torvalds
|
1785d11612 |
Char/Misc driver patches for 5.9-rc1
Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylccQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymofgCfZ1CxNWd0ZVM0YIn8cY9gO6ON7MsAnRq48hvn Vjf4rKM73GC11bVF4Gyy =Xq1R -----END PGP SIGNATURE----- Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits) habanalabs: remove unused but set variable 'ctx_asid' nvmem: qcom-spmi-sdam: Enable multiple devices dt-bindings: nvmem: SID: add binding for A100's SID controller nvmem: update Kconfig description nvmem: qfprom: Add fuse blowing support dt-bindings: nvmem: Add properties needed for blowing fuses dt-bindings: nvmem: qfprom: Convert to yaml nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances nvmem: core: add support to auto devid nvmem: core: Add nvmem_cell_read_u8() nvmem: core: Grammar fixes for help text nvmem: sc27xx: add sc2730 efuse support nvmem: Enforce nvmem stride in the sysfs interface MAINTAINERS: Add git tree for NVMEM FRAMEWORK nvmem: sprd: Fix return value of sprd_efuse_probe() drivers: android: Fix the SPDX comment style drivers: android: Fix a variable declaration coding style issue drivers: android: Remove braces for a single statement if-else block drivers: android: Remove the use of else after return drivers: android: Fix a variable declaration coding style issue ... |
||
|
Linus Torvalds
|
e0fc99e21e |
for-5.9/drivers-20200803
-----BEGIN PGP SIGNATURE-----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=oADH
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe:
- ZNS support (Aravind, Keith, Matias, Niklas)
- Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David,
Dongli, Max, Sagi)
- null_blk zone capacity support (Aravind)
- MD:
- raid5/6 fixes (ChangSyun)
- Warning fixes (Damien)
- raid5 stripe fixes (Guoqing, Song, Yufen)
- sysfs deadlock fix (Junxiao)
- raid10 deadlock fix (Vitaly)
- struct_size conversions (Gustavo)
- Set of bcache updates/fixes (Coly)
* tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits)
md/raid5: Allow degraded raid6 to do rmw
md/raid5: Fix Force reconstruct-write io stuck in degraded raid5
raid5: don't duplicate code for different paths in handle_stripe
raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show
md: print errno in super_written
md/raid5: remove the redundant setting of STRIPE_HANDLE
md: register new md sysfs file 'uuid' read-only
md: fix max sectors calculation for super 1.0
nvme-loop: remove extra variable in create ctrl
nvme-loop: set ctrl state connecting after init
nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths
nvme-multipath: fix logic for non-optimized paths
nvme-rdma: fix controller reset hang during traffic
nvme-tcp: fix controller reset hang during traffic
nvmet: introduce the passthru Kconfig option
nvmet: introduce the passthru configfs interface
nvmet: Add passthru enable/disable helpers
nvmet: add passthru code to process commands
nvme: export nvme_find_get_ns() and nvme_put_ns()
nvme: introduce nvme_ctrl_get_by_path()
...
|
||
|
Linus Torvalds
|
2324d50d05 |
It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again for a
while. Unless we decide to switch to asciidoc or something...:)
- Lots of typo fixes, warning fixes, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl8oVkwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YoW8H/jJ/xnXFn7tkgVPQAlL3k5HCnK7A5nDP9RVR
cg1pTx1cEFdjzxPlJyExU6/v+AImOvtweHXC+JDK7YcJ6XFUNYXJI3LxL5KwUXbY
BL/xRFszDSXH2C7SJF5GECcFYp01e/FWSLN3yWAh+g+XwsKiTJ8q9+CoIDkHfPGO
7oQsHKFu6s36Af0LfSgxk4sVB7EJbo8e4psuPsP5SUrl+oXRO43Put0rXkR4yJoH
9oOaB51Do5fZp8I4JVAqGXvpXoExyLMO4yw0mASm6YSZ3KyjR8Fae+HD9Cq4ZuwY
0uzb9K+9NEhqbfwtyBsi99S64/6Zo/MonwKwevZuhtsDTK4l4iU=
=JQLZ
-----END PGP SIGNATURE-----
Merge tag 'docs-5.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)
- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for <alobakin@marvell.com>
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
...
|
||
|
Linus Torvalds
|
a754292348 |
Printk changes for 5.9
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAl8pk84ACgkQUqAMR0iA lPIrTxAAhD6fosJx+7LCrDRABIw/ZybeS5MIxTuPsNtdMmGBemigew5Ao1wYY6Ww 3BFiNC2LpDXPxSOCQpz0Zm5/oCLhShPJmS6ukjLbufDsiw0MezliKCAa2Bfw3W31 6xntQtf7ps+bmTEQDyuznu8Kfg+I3lmdGUOEBBluHIP4gb7XKQE8ttyUHB6qdiXI 3eAl53Q8dOMMjtk5eNBXA19JY43g4JmLZRBumrAUc1vsv15KTDmSyWKlV8+tLH9K JbQAHe0pNVec4sJUIYLvIwDZXvtsvxjdJyX3tTeZ7xJ/ARcvRLoixVGqWxKhqdth j5U/L+YQfCJifyqvEVo03yy4Ti+OraliRpGcRf/bM2HpmFBA2+dISr7/VEqRwkG7 Sy8HuvBHHyUqdrPjB7izhv8iyRN+LxFfpdT5LMnzsvxMxAJ+QwNjxb13RA4kkeRU 5SgOhfGWgTsLy71J6qdSeXYB2oPFw4Onp5yAtoUsOJVYqWkN9x0zdl+9HmqIHF7T dY+KNriEO6gmpsQrMR4FC/GVMtwYWf8AoqeZen5O5SQULmzuKQ5AkOo0IAMrU92i iAdFrSZj35HAQjIJRccPNGZ3FwTd1Z4r5GT7VRvrN+nq2wVopzbbz924/lmsGoAS YppAw31sKfXDc5uWE8jP8GP3OJqhORn2PPXq3D5Q3XSVbGgey0Q= =ZcMq -----END PGP SIGNATURE----- Merge tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Herbert Xu made printk header file self-contained. - Andy Shevchenko and Sergey Senozhatsky cleaned up console->setup() error handling. - Andy Shevchenko did some cleanups (e.g. sparse warning) in vsprintf code. - Minor documentation updates. * tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: lib/vsprintf: Force type of flags value for gfp_t lib/vsprintf: Replace custom spec to print decimals with generic one lib/vsprintf: Replace hidden BUILD_BUG_ON() with static_assert() printk: Make linux/printk.h self-contained doc:kmsg: explicitly state the return value in case of SEEK_CUR Replace HTTP links with HTTPS ones: vsprintf hvc: unify console setup naming console: Fix trivia typo 'change' -> 'chance' console: Propagate error code from console ->setup() tty: hvc: Return proper error code from console ->setup() hook serial: sunzilog: Return proper error code from console ->setup() hook serial: sunsab: Return proper error code from console ->setup() hook mips: Return proper error code from console ->setup() hook |
||
|
Linus Torvalds
|
0408497800 |
Power management updates for 5.9-rc1
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver
and eliminate a redundant static variable from it (Chen Yu,
Rafael Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the
Intel RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to
be specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq
driver (Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal
Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the
MMC jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz
Luba, Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance names
consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander
A. Klimov).
-----BEGIN PGP SIGNATURE-----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=8cUO
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most significant change here is the extension of the Energy Model
to cover non-CPU devices (as well as CPUs) from Lukasz Luba.
There is also some new hardware support (Ice Lake server idle states
table for intel_idle, Sapphire Rapids and Power Limit 4 support in the
RAPL driver), some new functionality in the existing drivers (eg. a
new switch to disable/enable CPU energy-efficiency optimizations in
intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq
core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci,
devfreq), including the elimination of W=1 build warnings from cpufreq
done by Lee Jones.
Specifics:
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver and
eliminate a redundant static variable from it (Chen Yu, Rafael
Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the Intel
RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to be
specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq driver
(Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the MMC
jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz Luba,
Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance
names consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander A.
Klimov)"
* tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits)
cpuidle: ACPI: fix 'return' with no value build warning
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
intel_idle: Customize IceLake server support
PM / devfreq: Fix the wrong end with semicolon
PM / devfreq: Fix indentaion of devfreq_summary debugfs node
PM / devfreq: Clean up the devfreq instance name in sysfs attr
memory: samsung: exynos5422-dmc: Add module param to control IRQ mode
memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold
memory: samsung: exynos5422-dmc: Use delayed timer as default
PM / devfreq: Add support delayed timer for polling mode
dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle
PM / devfreq: tegra: Add Dmitry as a maintainer
PM / devfreq: event: Fix trivial spelling
PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
...
|
||
|
Linus Torvalds
|
822ef14e9d |
ARM: SoC driver updates for v5.9
A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory
subsystem and its drivers, starting out with a set of cleanup
patches.
A larger driver for the Tegra memory controller that was accidentally
missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware blobs
The tegra firmware driver gets extended to export some debug information
Various updates to i.MX firmware drivers, mostly cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space.
A new firmware based trusted platform module (fTPM) driver is added
based on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for identifying
a machine through the SMCCC ARCH_SOC_ID firmware interface rather than
by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device code.
There are also a number of updates to SoC specific drivers,
the main ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl8j3y4ACgkQmmx57+YA
GNm8Iw//euEC37KaiBDhlK3mcAL7NOdITqZpq4m+ZJZBsF02NDMWktJR8bYuOgmp
kjR4LjCxa2i+UOq1Ln+zYSlS27AngZLHFM+YSG3jqDho12GYIe4OBZB/q/hkDu71
L5jCPNrZV9+GIcean2u8LOWDNlQ4SZQyZ1/gcCK7y7I8W1pVulmJRhtJ0MNkezni
gDQ+OH+6+6XY8AethWK9ubsYH7SeJX/U6I8t5KJGhPr6FlaJFZOO5RTdUkBFMHpS
i4UaT4meuqZUjwz4BhjvoYul5AT6Zc8OOTQwk1FM7dIe47aI8VkWrWci/IekxoLh
UXtKbAJxerCIdehfiygX4pKtOmRKSisS2ocWsKg46Htu11ltv0XMRgyLyGv4Vm84
g+fKfKUL0SUueDqr+jKEq2aZdyLxwV5ZUoFt3IVsXdHRkZtxpN8jmOHOjV6erLVY
m7S85U5eclNdK5Ap7RSVvQa4NP3NTUvJd1IDNIneUVyACRkxzWEKmE3ZuEO4qttS
WSDW74m5ja80pltv1umFbGAsOUTZWA+WGULeXPv4CIooaD8RL6Jzs+7tkZEEhleU
WlGBFE4eJi/ChMeyTKXPvEqsQncLSf0mGzM4/DVY6XRSTIrW+cuj1/Gsso1BJdod
aZZ76uMNHJdAt0PcxL47lDUDxhJDkTwBsfGNJseZ3sYlAQ7Wmqo=
=nezz
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
|
||
|
Linus Torvalds
|
09a0bd0776 |
platform-drivers-x86 for v5.9-1
* ASUS WMI driver honors BAT1 name of the battery (quite a few new laptops are using it) * Dell WMI driver supports new key codes and backlight events * ThinkPad ACPI driver now may use standard charge threshold interface, it also has been updated to provide Laptop or Desktop mode to the user * Intel Speed Select Technology gained support on Sapphire Rapids platform * Regular update of Speed Select Technology tools * Mellanox has been updated to support complex attributes * PMC core driver has been fixed to show correct names for LPM0 register * HTTP links were replaced by HTTPS ones where it applies * Miscellaneous fixes and cleanups here and there The following is an automated git shortlog grouped by driver: acerhdf: - Replace HTTP links with HTTPS ones Add new intel_atomisp2_led driver: - Add new intel_atomisp2_led driver apple-gmux: - Replace HTTP links with HTTPS ones asus-nb-wmi: - Drop duplicate DMI quirk structures - add support for ASUS ROG Zephyrus G14 and G15 asus-wmi: - allow BAT1 battery name dell-wmi: - add new dmi mapping for keycode 0xffff - add new keymap type 0x0012 - add new backlight events intel_cht_int33fe: - Drop double check for ACPI companion device intel-hid: - Fix return value check in check_acpi_dev() intel_pmc_core: - fix bound check in pmc_core_mphy_pg_show() - update TGL's LPM0 reg bit map name intel-vbtn: - Fix return value check in check_acpi_dev() ISST: - drop a duplicated word in isst_if.h - Add new PCI device ids pcengines-apuv2: - revert wiring up simswitch GPIO as LED platform/mellanox: - Introduce string_upper() and string_lower() helpers - Add string_upper() and string_lower() tests - Extend FAN platform data description - Add more definitions for system attributes - Add new attribute for mlxreg-io sysfs interfaces - Add presence register field for FAN devices - Add support for complex attributes - mlxreg-io: Add support for complex attributes - mlxreg-hotplug: Add environmental data to uevent - mlxreg-hotplug: Use capability register for attribute creation - mlxreg-hotplug: Modify module license system76-acpi: - Fix brightness_set schedule while atomic thinkpad_acpi: - Make some symbols static - add documentation for battery charge control - use standard charge control attribute names - remove unused defines - Replace HTTP links with HTTPS ones - not loading brightness_init when _BCL invalid - lap or desk mode interface - Revert "Use strndup_user() in dispatch_proc_write()" tools/power/x86/intel-speed-select: - Update version for v5.9 - Add retries for mail box commands - Add option to delay mbox commands - Ignore -o option processing on error - Change path for caching topology info -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAl8n9UIACgkQb7wzTHR8 rCg0cRAAnHC699qMns53T+jSMAc9kY5vrwbf2Bacwjp5vYS7uw3S12kLNgQh6JWM B8imS1RAMlHfCvGT9vUs+mbpemCfYpFZ0HQ4z+VMzziKayJu8pCD9O2XDS9lRUHj uKqA19FX6lXfJnrhRoi3vM0JC35FXZQZkueLyJ728t1xqcDkNS2/O/by3c76XnK1 r81jl9m+qMJwB5zt+6qeSWjZAgFCTDvOHA/gZTEKF1VBOcafN1RHWTLH49JtpBH7 +pPoy9mw3zfDJReqKxFhaXgDlueBlRwTBG5kEQk9aIxgA9T8q2jqEyAw5XtAKOWp RCebgCpC5NHXyz/2CVzaJWYikS/Iuvr4ynx6F2nKXVClGMtF7Obb2/3rvSCOTMri ge1bJ2NomUL9F5Cd/iR/F4/jNtxk9LSuzW+otA+/m+g8UkK574cefQQmBdrhrfDU GqK6C1kB7OQW2v3tPKVsWvduXQTaaCVzINEkdUxK50PXZayY7+w0djM+QFR/sadw 2/okr1zuNjFnEt7HtZRP5bzEm1ofXVo5JIaCnpwgsz6dCQH4NiuVxsc/GyanRpBJ AadUAYcD+PRRnOybsfhx5MlUt/JIr6cV0OvT8LlWPINJjTpWPlqMeBYdDUOLCndX 3LXmoZ0k8IQ2LLmONc5UBX1+iayCO+PkHcBDoJdNuWT1eoO06M8= =yvnW -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - ASUS WMI driver honors BAT1 name of the battery (quite a few new laptops are using it) - Dell WMI driver supports new key codes and backlight events - ThinkPad ACPI driver now may use standard charge threshold interface, it also has been updated to provide Laptop or Desktop mode to the user - Intel Speed Select Technology gained support on Sapphire Rapids platform - Regular update of Speed Select Technology tools - Mellanox has been updated to support complex attributes - PMC core driver has been fixed to show correct names for LPM0 register - HTTP links were replaced by HTTPS ones where it applies - Miscellaneous fixes and cleanups here and there * tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86: (42 commits) platform/x86: asus-nb-wmi: Drop duplicate DMI quirk structures platform/x86: thinkpad_acpi: Make some symbols static platform/x86: thinkpad_acpi: add documentation for battery charge control platform/x86: thinkpad_acpi: use standard charge control attribute names platform/x86: thinkpad_acpi: remove unused defines platform/x86: ISST: drop a duplicated word in isst_if.h tools/power/x86/intel-speed-select: Update version for v5.9 tools/power/x86/intel-speed-select: Add retries for mail box commands tools/power/x86/intel-speed-select: Add option to delay mbox commands tools/power/x86/intel-speed-select: Ignore -o option processing on error tools/power/x86/intel-speed-select: Change path for caching topology info platform/x86: acerhdf: Replace HTTP links with HTTPS ones platform/x86: apple-gmux: Replace HTTP links with HTTPS ones platform/x86: pcengines-apuv2: revert wiring up simswitch GPIO as LED platform/x86: mlx-platform: Extend FAN platform data description platform_data/mlxreg: Add presence register field for FAN devices Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform/mellanox: mlxreg-io: Add support for complex attributes platform/x86: mlx-platform: Add more definitions for system attributes platform_data/mlxreg: Add support for complex attributes ... |
||
Vaibhav Jain
|
2d02bf835e |
powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
Update papr_scm.c to query dimm performance statistics from PHYP via H_SCM_PERFORMANCE_STATS hcall and export them to user-space as PAPR specific NVDIMM attribute 'perf_stats' in sysfs. The patch also provide a sysfs ABI documentation for the stats being reported and their meanings. During NVDIMM probe time in papr_scm_nvdimm_init() a special variant of H_SCM_PERFORMANCE_STATS hcall is issued to check if collection of performance statistics is supported or not. If successful then a PHYP returns a maximum possible buffer length needed to read all performance stats. This returned value is stored in a per-nvdimm attribute 'stat_buffer_len'. The layout of request buffer for reading NVDIMM performance stats from PHYP is defined in 'struct papr_scm_perf_stats' and 'struct papr_scm_perf_stat'. These structs are used in newly introduced drc_pmem_query_stats() that issues the H_SCM_PERFORMANCE_STATS hcall. The sysfs access function perf_stats_show() uses value 'stat_buffer_len' to allocate a buffer large enough to hold all possible NVDIMM performance stats and passes it to drc_pmem_query_stats() to populate. Finally statistics reported in the buffer are formatted into the sysfs access function output buffer. Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200731064153.182203-2-vaibhav@linux.ibm.com |
||
Crag Wang
|
46cbd0b057 |
power: supply: wilco_ec: Add long life charging mode
This is a long life mode set in the factory for extended warranty battery, the power charging rate is customized so that battery at work last longer. Presently switching to a different battery charging mode is through EC PID 0x0710 to configure the battery firmware, this operation will be blocked by EC with failure code 0x01 when PLL mode is already in use. Signed-off-by: Crag Wang <crag.wang@dell.com> Reviewed-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> |
||
|
Chanwoo Choi
|
4dc3bab868 |
PM / devfreq: Add support delayed timer for polling mode
Until now, the devfreq driver using polling mode like simple_ondemand governor have used only deferrable timer for reducing the redundant power consumption. It reduces the CPU wake-up from idle due to polling mode which check the status of Non-CPU device. But, it has a problem for Non-CPU device like DMC device with DMA operation. Some Non-CPU device need to do monitor continuously regardless of CPU state in order to decide the proper next status of Non-CPU device. So, add support the delayed timer for polling mode to support the repetitive monitoring. The devfreq driver and user can select the kind of timer on either deferrable and delayed timer. For example, change the timer type of DMC device based on Exynos5422-based Odroid-XU3 as following: - If want to use deferrable timer as following: echo deferrable > /sys/class/devfreq/10c20000.memory-controller/timer - If want to use delayed timer as following: echo delayed > /sys/class/devfreq/10c20000.memory-controller/timer Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> |
||
|
Alexander Usyskin
|
2f79d3d1f7 |
mei: add device kind to sysfs
Some of the mei device heads are not generic and have a specific purpose, we need to announce it to the user space so it is possible to detect the correct device node via matching attributes. Generic heads are marked as 'mei' while special purpose heads have their own names. Currently we are adding 'itouch' string for Intel IPTS 1.0, 2.0 devices. This is done via new sysfs attribute 'kind'. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200728192242.3117779-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Samuel Thibault
|
2067fd92d7 |
staging/speakup: Move out of staging
The nasty TODO items are done. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Link: https://lore.kernel.org/r/20200729003531.907370-1-samuel.thibault@ens-lyon.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Dan Williams
|
a1facc1fff |
ACPI: NFIT: Add runtime firmware activate support
Plumb the platform specific backend for the generic libnvdimm firmware activate interface. Register dimm level operations to arm/disarm activation, and register bus level operations to report the dynamic platform-quiesce time relative to the number of dimms armed for firmware activation. A new nfit-specific bus attribute "firmware_activate_noidle" is added to allow the activation to switch between platform enforced, and OS opportunistic device quiesce. In other words, let the hibernate cycle handle in-flight device-dma rather than the platform attempting to increase PCI-E timeouts and the like. Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> |
||
|
Dan Williams
|
48001ea50d |
PM, libnvdimm: Add runtime firmware activation support
Abstract platform specific mechanics for nvdimm firmware activation behind a handful of generic ops. At the bus level ->activate_state() indicates the unified state (idle, busy, armed) of all DIMMs on the bus, and ->capability() indicates the system state expectations for activate. At the DIMM level ->activate_state() indicates the per-DIMM state, ->activate_result() indicates the outcome of the last activation attempt, and ->arm() attempts to transition the DIMM from 'idle' to 'armed'. A new hibernate_quiet_exec() facility is added to support firmware activation in an OS defined system quiesce state. It leverages the fact that the hibernate-freeze state wants to assert that a memory hibernation snapshot can be taken. This is in contrast to a platform firmware defined quiesce state that may forcefully quiet the memory controller independent of whether an individual device-driver properly supports hibernate-freeze. The libnvdimm sysfs interface is extended to support detection of a firmware activate capability. The mechanism supports enumeration and triggering of firmware activate, optionally in the hibernate_quiet_exec() context. [rafael: hibernate_quiet_exec() proposal] [vishal: fix up sparse warning, grammar in Documentation/] Cc: Pavel Machek <pavel@ucw.cz> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Reported-by: kernel test robot <lkp@intel.com> Co-developed-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> |
||
Ingo Molnar
|
e89d4ca1df |
Linux 5.8-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8d8h4eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGd0sH/2iktYhMwPxzzpnb eI3OuTX/mRn4vUFOfpx9dmGVleMfKkpbvnn3IY7wA62Qfv7J7lkFRa1Bd1DlqXfW yyGTGDSKG5chiRCOU3s9ni92M4xIzFlrojyt/dIK2lUGMzUPI9FGlZRGQLKqqwLh 2syOXRWbcQ7e52IHtDSy3YBNveKRsP4NyqV+GxGiex18SMB/M3Pw9EMH614eDPsE QAGQi5uGv4hPJtFHgXgUyBPLFHIyFAiVxhFRIj7u2DSEKY79+wO1CGWFiFvdTY4B CbqKXLffY3iQdFsLJkj9Dl8cnOQnoY44V0EBzhhORxeOp71StUVaRwQMFa5tp48G 171s5Hs= =BQIl -----END PGP SIGNATURE----- Merge tag 'v5.8-rc7' into perf/core, to pick up fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Greg Kroah-Hartman
|
908e757dae |
Linux 5.8-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8d8h4eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGd0sH/2iktYhMwPxzzpnb eI3OuTX/mRn4vUFOfpx9dmGVleMfKkpbvnn3IY7wA62Qfv7J7lkFRa1Bd1DlqXfW yyGTGDSKG5chiRCOU3s9ni92M4xIzFlrojyt/dIK2lUGMzUPI9FGlZRGQLKqqwLh 2syOXRWbcQ7e52IHtDSy3YBNveKRsP4NyqV+GxGiex18SMB/M3Pw9EMH614eDPsE QAGQi5uGv4hPJtFHgXgUyBPLFHIyFAiVxhFRIj7u2DSEKY79+wO1CGWFiFvdTY4B CbqKXLffY3iQdFsLJkj9Dl8cnOQnoY44V0EBzhhORxeOp71StUVaRwQMFa5tp48G 171s5Hs= =BQIl -----END PGP SIGNATURE----- Merge 5.8-rc7 into staging-next We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
eea2c51f81 |
Linux 5.8-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8d8h4eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGd0sH/2iktYhMwPxzzpnb eI3OuTX/mRn4vUFOfpx9dmGVleMfKkpbvnn3IY7wA62Qfv7J7lkFRa1Bd1DlqXfW yyGTGDSKG5chiRCOU3s9ni92M4xIzFlrojyt/dIK2lUGMzUPI9FGlZRGQLKqqwLh 2syOXRWbcQ7e52IHtDSy3YBNveKRsP4NyqV+GxGiex18SMB/M3Pw9EMH614eDPsE QAGQi5uGv4hPJtFHgXgUyBPLFHIyFAiVxhFRIj7u2DSEKY79+wO1CGWFiFvdTY4B CbqKXLffY3iQdFsLJkj9Dl8cnOQnoY44V0EBzhhORxeOp71StUVaRwQMFa5tp48G 171s5Hs= =BQIl -----END PGP SIGNATURE----- Merge 5.8-rc7 into driver-core-next We want the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
65a9bde6ed |
Linux 5.8-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8d8h4eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGd0sH/2iktYhMwPxzzpnb eI3OuTX/mRn4vUFOfpx9dmGVleMfKkpbvnn3IY7wA62Qfv7J7lkFRa1Bd1DlqXfW yyGTGDSKG5chiRCOU3s9ni92M4xIzFlrojyt/dIK2lUGMzUPI9FGlZRGQLKqqwLh 2syOXRWbcQ7e52IHtDSy3YBNveKRsP4NyqV+GxGiex18SMB/M3Pw9EMH614eDPsE QAGQi5uGv4hPJtFHgXgUyBPLFHIyFAiVxhFRIj7u2DSEKY79+wO1CGWFiFvdTY4B CbqKXLffY3iQdFsLJkj9Dl8cnOQnoY44V0EBzhhORxeOp71StUVaRwQMFa5tp48G 171s5Hs= =BQIl -----END PGP SIGNATURE----- Merge 5.8-rc7 into char-misc-next This should resolve the merge/build issues reported when trying to create linux-next. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
c97793089b |
Linux 5.8-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8d8h4eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGd0sH/2iktYhMwPxzzpnb eI3OuTX/mRn4vUFOfpx9dmGVleMfKkpbvnn3IY7wA62Qfv7J7lkFRa1Bd1DlqXfW yyGTGDSKG5chiRCOU3s9ni92M4xIzFlrojyt/dIK2lUGMzUPI9FGlZRGQLKqqwLh 2syOXRWbcQ7e52IHtDSy3YBNveKRsP4NyqV+GxGiex18SMB/M3Pw9EMH614eDPsE QAGQi5uGv4hPJtFHgXgUyBPLFHIyFAiVxhFRIj7u2DSEKY79+wO1CGWFiFvdTY4B CbqKXLffY3iQdFsLJkj9Dl8cnOQnoY44V0EBzhhORxeOp71StUVaRwQMFa5tp48G 171s5Hs= =BQIl -----END PGP SIGNATURE----- Merge 5.8-rc7 into usb-next We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Saravana Kannan
|
90b109d50d |
driver core: Change delimiter in devlink device's name to "--"
The devlink device name is of the form "supplier:consumer". But ":" is fairly common in device names and makes it visually hard to distinguish supplier and consumer. So, replace it with "--" to make it easier. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200724180523.1393383-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Arnd Bergmann
|
1d4eadaf17 |
mvebu drivers for 5.9 (part 1)
For firmware on the Turris MOX (Armada 3720 based board), add support ECDSA signatures via debugfs. -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXxqgnwAKCRALBhiOFHI7 1aROAJ9xw1KBR6g4InE5NvO3yHy29L12SgCeM0klcfvENUGuhW8pntmqY5c3Zu8= =4riI -----END PGP SIGNATURE----- Merge tag 'mvebu-drivers-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/drivers mvebu drivers for 5.9 (part 1) For firmware on the Turris MOX (Armada 3720 based board), add support ECDSA signatures via debugfs. * tag 'mvebu-drivers-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: firmware: turris-mox-rwtm: add debugfs documentation firmware: turris-mox-rwtm: support ECDSA signatures via debugfs Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Marek Behún
|
45c2818f78 |
Documentation: ABI: leds-turris-omnia: document sysfs attribute
Document the global brightness attribute for the Turris Omnia LED controller. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Pavel Machek <pavel@ucw.cz> |
||
Dan Murphy
|
55d5d3b46b |
leds: multicolor: Introduce a multicolor class definition
Introduce a multicolor class that groups colored LEDs within a LED node. The multicolor class groups monochrome LEDs and allows controlling two aspects of the final combined color: hue and lightness. The former is controlled via the intensity file and the latter is controlled via brightness file. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> [squashed leds: multicolor: Fix camel case in documentation in] |
||
|
Dan Murphy
|
98cc1b9372 |
power_supply: Add additional health properties to the header
Add HEALTH_WARM, HEALTH_COOL and HEALTH_HOT to the health enum. HEALTH_WARM, HEALTH_COOL, and HEALTH_HOT properties are taken from JEITA specification JISC8712:2015 Acked-by: Andrew F. Davis <afd@ti.com> Tested-by: Guru Das Srinagesh <gurus@codeaurora.org> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> |
||
|
Greg Kroah-Hartman
|
6c9a9a8ddf |
thunderbolt: Changes for v5.9 merge window
This includes following Thunderbolt/USB4 changes for v5.9 merge window:
* Improvements around NHI (Native Host Interface) HopID allocation
* Improvements to tunneling and USB3 bandwidth management support
* Add KUnit tests for path walking and tunneling
* Initial support for USB4 retimer firmware upgrade
* Implement Thunderbolt device firmware upgrade mechanism that runs
the NVM image authentication when the device is disconnected.
* A couple of small non-critical fixes
-----BEGIN PGP SIGNATURE-----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=FHld
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.9 merge window
This includes following Thunderbolt/USB4 changes for v5.9 merge window:
* Improvements around NHI (Native Host Interface) HopID allocation
* Improvements to tunneling and USB3 bandwidth management support
* Add KUnit tests for path walking and tunneling
* Initial support for USB4 retimer firmware upgrade
* Implement Thunderbolt device firmware upgrade mechanism that runs
the NVM image authentication when the device is disconnected.
* A couple of small non-critical fixes
* tag 'thunderbolt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (32 commits)
thunderbolt: Fix old style declaration warning
thunderbolt: Add support for authenticate on disconnect
thunderbolt: Add support for separating the flush to SPI and authenticate
thunderbolt: Ensure left shift of 512 does not overflow a 32 bit int
thunderbolt: Add support for on-board retimers
thunderbolt: Implement USB4 port sideband operations for retimer access
thunderbolt: Retry USB4 block read operation
thunderbolt: Generalize usb4_switch_do_[read|write]_data()
thunderbolt: Split common NVM functionality into a separate file
thunderbolt: Add Intel USB-IF ID to the NVM upgrade supported list
thunderbolt: Add KUnit tests for tunneling
thunderbolt: Add USB3 bandwidth management
thunderbolt: Make tb_port_get_link_speed() available to other files
thunderbolt: Implement USB3 bandwidth negotiation routines
thunderbolt: Increase DP DPRX wait timeout
thunderbolt: Report consumed bandwidth in both directions
thunderbolt: Make usb4_switch_map_pcie_down() also return enabled ports
thunderbolt: Make usb4_switch_map_usb3_down() also return enabled ports
thunderbolt: Do not tunnel USB3 if link is not USB4
thunderbolt: Add DP IN resources for all routers
...
|
||
|
Marek Behún
|
e6e57b663e |
firmware: turris-mox-rwtm: add debugfs documentation
Add debugfs ABI documentation for the ECDSA signatures. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> |
||
|
Greg Kroah-Hartman
|
f6b35db072 |
First set of new device support, cleanups and features for IIO in the 5.9 cycle
Some new devices, but particularly good this time is the core rework coming
from Alexandru. Some of this has been in Analog's tree a long time, but other
parts are motivated by closing down common mistakes in new drivers.
Changes since first try at this pull request:
* Add missed patch to actually remove iio_priv_to_dev and as a result
also drop a few ingenic patches that need to be updated to take this
into account.
* Fix an ordering issue int he pollfunc attach in the core rework.
New device support
* qcom pmic7 adc
- New driver using common qcom-vadc library. Some associated cleanups and
refactors.
* invensense icm42600
- New driver supporting icm42600, icm42602, icm42605 and icm42622 via i2c
or spi. These are all 6 axis IMUs with gyro and accelerometers.
Driver supports buffered modes using the hardware fifo and interpolation
for accurate timestamps.
* sensirion scd30
- New driver for this carbon dioxide sensor including i2c and serial
interfaces + bindings.
Features
* ak8975
- Add reset gpio support.
* bma400
- Support SPI.
* bmc150
- Document and add support for bmc156b and bmm150b, tidy up _magn endings.
* bmi160
- Regulator and mount matrix support.
* mxc4005
- Add ID for mxc6655
* rockchip-saradc
- Triggered buffer support.
DT bindings
* qcom spmi-vadc converted to yaml + pmic7 bindings
* ak8975 tidy up and convert to yaml + add reset-gpio binding
* ingenic-adc -convert to yaml.
Core rework all carried through by Alexandru Ardelean.
* Assign parent device in the core rather than every driver. A few devices
need to provide specific non standard parents, so there is support for
overriding.
* Start to take parts of struct iio_dev opaque to the drivers.
This will be a long term job, but should reduce the number of drivers
we get that use parts that are currently only 'internal' by documentation.
* Move attach and detach of pollfunc to the core. Every triggered buffer
using driver had to do the same thing, so lets do it in the core. The
hard part here was getting all the drivers into canonical form so there
would be no functional changes in this final patch. That's taken quite
a lot of work over last couple of cycles!
Cleanups and minor fixes.
* docs
- Improve IIO_CONCENTRATION channel type description in ABI docs.
- Drop doubled word cases.
- Http to Https conversion.
* core
- Make iio_device_get_drvdata take a const struct iio_dev * avoiding some
nasty casts.
* ADCs
- Drop lots of users of of_match_ptr macro, includes of mod_devicetable.h
and CONFIG_OF protections. These prevent use of ACPI PRP0001 with these
drivers and get coppied into lots of new drivers.
* ad5380
- Constify iio_chan_spec_ext_info
* ad5592r
- Constify iio_chan_spec_ext_info
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ad8366
- Make gpio optional as doesn't matter if its there or not.
* adis16480
- Use irq types instead of the flags.
* atlas-ezo-sensor
- Minimize scope of ret variable.
* at91-adc
- Add COMPILE_TEST dependency to driver to improve build coverage.
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* at91-sama5d2
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
- Drop Ludovic as a co-maintaienr.
* cros_ec
- Reapply the range after resume.
- Add a read only frequency entry for legacy version.
- Typo fixes
* hts221
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* inv_mpu
- Drop double check on ACPI companion device.
* iqs621
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* iqs624
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* max11100
- Constify iio_chan_spec
* mmc35240
- Constify reg_default
* rockchip-saradc
- Move to managed allocators for everything in probe.
- Use more distinctive prefix for channel macros.
* stk3310
- Constify regmap_config.
* stm32-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* stm32-dfsdm-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ti-am335x
- Use managed allocations where straight forward in probe function.
* tsl2563
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
-----BEGIN PGP SIGNATURE-----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=LyRl
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, cleanups and features for IIO in the 5.9 cycle
Some new devices, but particularly good this time is the core rework coming
from Alexandru. Some of this has been in Analog's tree a long time, but other
parts are motivated by closing down common mistakes in new drivers.
Changes since first try at this pull request:
* Add missed patch to actually remove iio_priv_to_dev and as a result
also drop a few ingenic patches that need to be updated to take this
into account.
* Fix an ordering issue int he pollfunc attach in the core rework.
New device support
* qcom pmic7 adc
- New driver using common qcom-vadc library. Some associated cleanups and
refactors.
* invensense icm42600
- New driver supporting icm42600, icm42602, icm42605 and icm42622 via i2c
or spi. These are all 6 axis IMUs with gyro and accelerometers.
Driver supports buffered modes using the hardware fifo and interpolation
for accurate timestamps.
* sensirion scd30
- New driver for this carbon dioxide sensor including i2c and serial
interfaces + bindings.
Features
* ak8975
- Add reset gpio support.
* bma400
- Support SPI.
* bmc150
- Document and add support for bmc156b and bmm150b, tidy up _magn endings.
* bmi160
- Regulator and mount matrix support.
* mxc4005
- Add ID for mxc6655
* rockchip-saradc
- Triggered buffer support.
DT bindings
* qcom spmi-vadc converted to yaml + pmic7 bindings
* ak8975 tidy up and convert to yaml + add reset-gpio binding
* ingenic-adc -convert to yaml.
Core rework all carried through by Alexandru Ardelean.
* Assign parent device in the core rather than every driver. A few devices
need to provide specific non standard parents, so there is support for
overriding.
* Start to take parts of struct iio_dev opaque to the drivers.
This will be a long term job, but should reduce the number of drivers
we get that use parts that are currently only 'internal' by documentation.
* Move attach and detach of pollfunc to the core. Every triggered buffer
using driver had to do the same thing, so lets do it in the core. The
hard part here was getting all the drivers into canonical form so there
would be no functional changes in this final patch. That's taken quite
a lot of work over last couple of cycles!
Cleanups and minor fixes.
* docs
- Improve IIO_CONCENTRATION channel type description in ABI docs.
- Drop doubled word cases.
- Http to Https conversion.
* core
- Make iio_device_get_drvdata take a const struct iio_dev * avoiding some
nasty casts.
* ADCs
- Drop lots of users of of_match_ptr macro, includes of mod_devicetable.h
and CONFIG_OF protections. These prevent use of ACPI PRP0001 with these
drivers and get coppied into lots of new drivers.
* ad5380
- Constify iio_chan_spec_ext_info
* ad5592r
- Constify iio_chan_spec_ext_info
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ad8366
- Make gpio optional as doesn't matter if its there or not.
* adis16480
- Use irq types instead of the flags.
* atlas-ezo-sensor
- Minimize scope of ret variable.
* at91-adc
- Add COMPILE_TEST dependency to driver to improve build coverage.
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* at91-sama5d2
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
- Drop Ludovic as a co-maintaienr.
* cros_ec
- Reapply the range after resume.
- Add a read only frequency entry for legacy version.
- Typo fixes
* hts221
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* inv_mpu
- Drop double check on ACPI companion device.
* iqs621
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* iqs624
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* max11100
- Constify iio_chan_spec
* mmc35240
- Constify reg_default
* rockchip-saradc
- Move to managed allocators for everything in probe.
- Use more distinctive prefix for channel macros.
* stk3310
- Constify regmap_config.
* stm32-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* stm32-dfsdm-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ti-am335x
- Use managed allocations where straight forward in probe function.
* tsl2563
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (107 commits)
iio: buffer: fix attach/detach pollfunc order
iio: core: remove iio_priv_to_dev() helper
Replace HTTP links with HTTPS ones: drivers/iio
Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
dt-bindings: iio/adc: Convert ingenic-adc docs to YAML.
iio: cros_ec_accel_legacy: Add Read Only frequency entries
MAINTAINERS: adc: at91-sama5d2_adc: remove myself as co-maintainer
iio: adc: ti_am335x_adc: alloc kfifo & IRQ via devm_ functions
iio: adc: ti_am335x_adc: alloc channels via devm_kcalloc()
iio:adc:ingenic: drop of_match_ptr protection and include mod_devicetable.h
iio:adc:ti-tlc4541: Drop CONFIG_OF and of_match_ptr protections.
iio:adc:ti-adc161s626: Drop of_match_ptr protection.
iio:adc:ti-adc084s021: drop of_match_ptr protection
iio:adc:ti-adc0832: drop CONFIG_OF and of_match_ptr protections
iio:adc:ti-adc081c: Drop of_match_ptr and change to mod_devicetable.h
iio:adc:sd_adc_modulator: Drop of_match_ptr and tweak includes
iio:adc:mcp3422: remove CONFIG_OF and of_match_ptr protections
iio:adc:mcp320x: Drop CONFIG_OF and of_match_ptr protections
iio:adc:max1118: Drop CONFIG_OF / of_match_ptr protections
iio:adc:max11100: Drop of_match_ptr protection / add mod_devicetable.h include
...
|
||
|
Kajol Jain
|
792f73f747 |
powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask
Patch here adds a cpumask attr to hv_24x7 pmu along with ABI documentation. Primary use to expose the cpumask is for the perf tool which has the capability to parse the driver sysfs folder and understand the cpumask file. Having cpumask file will reduce the number of perf command line parameters (will avoid "-C" option in the perf tool command line). It can also notify the user which is the current cpu used to retrieve the counter data. command:# cat /sys/devices/hv_24x7/interface/cpumask 0 Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709051836.723765-3-kjain@linux.ibm.com |
||
Niklas Cassel
|
659bf827ba |
block: add max_active_zones to blk-sysfs
Add a new max_active zones definition in the sysfs documentation. This definition will be common for all devices utilizing the zoned block device support in the kernel. Export max_active_zones according to this new definition for NVMe Zoned Namespace devices, ZAC ATA devices (which are treated as SCSI devices by the kernel), and ZBC SCSI devices. Add the new max_active_zones member to struct request_queue, rather than as a queue limit, since this property cannot be split across stacking drivers. For SCSI devices, even though max active zones is not part of the ZBC/ZAC spec, export max_active_zones as 0, signifying "no limit". Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Niklas Cassel
|
e15864f8ea |
block: add max_open_zones to blk-sysfs
Add a new max_open_zones definition in the sysfs documentation. This definition will be common for all devices utilizing the zoned block device support in the kernel. Export max open zones according to this new definition for NVMe Zoned Namespace devices, ZAC ATA devices (which are treated as SCSI devices by the kernel), and ZBC SCSI devices. Add the new max_open_zones member to struct request_queue, rather than as a queue limit, since this property cannot be split across stacking drivers. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Vadim Pasternak
|
f6fae31e59 |
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
Add documentation for the new attributes for exposing CPLDs part numbers and CPLD minor versions. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
Philippe Bergheaud
|
87db7579eb |
ocxl: control via sysfs whether the FPGA is reloaded on a link reset
Some opencapi FPGA images allow to control if the FPGA should be reloaded on the next adapter reset. If it is supported, the image specifies it through a Vendor Specific DVSEC in the config space of function 0. Signed-off-by: Philippe Bergheaud <felix@linux.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200619140439.153962-1-fbarrat@linux.ibm.com |
||
|
Arnd Bergmann
|
38d9dff186 |
Enable multi-stage OP-TEE bus enumeration
Probes drivers on the OP-TEE bus in two steps. First for drivers which do not depend on tee-supplicant. After tee-supplicant has been started probe the devices which do depend on tee-supplicant. Also introduces driver which uses an OP-TEE based fTPM Trusted Application depends on tee-supplicant NV RAM implementation based on RPMB secure storage. -----BEGIN PGP SIGNATURE----- iQJOBAABCgA4FiEEFV+gSSXZJY9ZyuB5LinzTIcAHJcFAl8IIS8aHGplbnMud2lr bGFuZGVyQGxpbmFyby5vcmcACgkQLinzTIcAHJfy4A//XAbKsdQo8ws3cRba++S5 VPdLIf0gdjC7LCPh8z4GD32EBzKAq0HJbgoX27cNGv3e9saN8q8vDOmnUlQb+eP5 ZoQUgb9OUY+I4IPV+CVl+4HcxUhiQSZe36x6yubGPk+fikzLy/W/LZm2RnQdw83W iLuKlAy+hbLdPVJBoFe/AGsy5SndyjoJ1/0GXRoN6RNk2GPNHhAYfmH6FxPwghL4 n0sqa4UjeI8t/x85l7Pwn0b/0vmXG65JQqaICHosfEoJR6JfGqFtaEJ3ibEyz90b QvuAFRlghPTYFwNOzBuoC958E4hQ2ulXXBL7soF4f9hRmqfv5u7L1C4ctcL6ZQtB 69XIkh9f9Og2ZG/UUgY7X1ZENk2XcAAiSsBqmF2dp170ron/+m7AYiYcPkMC9sSt G0ubdHtXah6fX+TCO9TW/JOm5xl/IrspMZF2jMaLtarZeiacUZSuGIuwrySdEtdn 49G2Xv2ZrPMjWsNyAgvR9myHYSlX7lioIJJ5oTURHDM/68i+KZCg/r88GJJjCYBY C1o0hILQ5o58L3atoa8JtPMs7cKF5S4UvbWl0otpVTUC9wcVyQOAPkrpTYplkKpy ByCGjxJ5W1OLpO8M1/US23DlMXGkqpX4eSvGUTtybqv0pr4FmEdKbgB1HNh9lA0/ ZjFOfDwn9qLRTzLVQ7DZTGI= =PDtV -----END PGP SIGNATURE----- Merge tag 'optee-bus-for-v5.9' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers Enable multi-stage OP-TEE bus enumeration Probes drivers on the OP-TEE bus in two steps. First for drivers which do not depend on tee-supplicant. After tee-supplicant has been started probe the devices which do depend on tee-supplicant. Also introduces driver which uses an OP-TEE based fTPM Trusted Application depends on tee-supplicant NV RAM implementation based on RPMB secure storage. * tag 'optee-bus-for-v5.9' of git://git.linaro.org/people/jens.wiklander/linux-tee: tpm_ftpm_tee: register driver on TEE bus optee: enable support for multi-stage bus enumeration optee: use uuid for sysfs driver entry Link: https://lore.kernel.org/r/20200710085230.GA1312913@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Bruno Meneguele
|
bc885f1ab6 |
doc:kmsg: explicitly state the return value in case of SEEK_CUR
The commit
|
||
|
Oded Gabbay
|
e38bfd30e0 |
habanalabs: set clock gating per engine
For debugging purposes, we need to allow the root user better control of the clock gating feature of the DMA and compute engines. Therefore, change the clock gating debugfs interface to be bitmask instead of true/false. Each bit represents a different engine, according to gaudi_engine_id enum. See debugfs documentation for more details. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai> |
||
|
Saravana Kannan
|
da6d647598 |
driver core: Add waiting_for_supplier sysfs file for devices
This would be useful to check if a device is not probing because it's waiting for a supplier to be added and then linked to before it can probe. To reduce sysfs clutter, this file is added only if it can ever be 1. So, if fw_devlink is disabled or set to permissive, this file is not added. Also, this file is removed once the device probes as it's no longer relevant. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200521191800.136035-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Saravana Kannan
|
8fd456ec0c |
driver core: Add state_synced sysfs file for devices that support it
This can be used to check if a device supports sync_state() callbacks and therefore keeps resources left on by the bootloader enabled till all its consumers have probed. This can also be used to check if sync_state() has been called for a device or whether it is still trying to keep resources enabled because they were left enabled by the bootloader and all its consumers haven't probed yet. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200521191800.136035-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Saravana Kannan
|
287905e68d |
driver core: Expose device link details in sysfs
It's helpful to be able to look at device link details from sysfs. So, expose it in sysfs. Say device-A is supplier of device-B. These are the additional files this patch would create: /sys/class/devlink/device-A:device-B/ auto_remove_on consumer/ -> .../device-B/ runtime_pm status supplier/ -> .../device-A/ sync_state_only /sys/devices/.../device-A/ consumer:device-B/ -> /sys/class/devlink/device-A:device-B/ /sys/devices/.../device-B/ supplier:device-A/ -> /sys/class/devlink/device-A:device-B/ That way: To get a list of all the device link in the system: ls /sys/class/devlink/ To get the consumer names and links of a device: ls -d /sys/devices/.../device-X/consumer:* To get the supplier names and links of a device: ls -d /sys/devices/.../device-X/supplier:* Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200521191800.136035-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Barry Song
|
4a60406d35 |
driver core: platform: expose numa_node to users in sysfs
Some platform devices like ARM SMMU are memory-mapped and populated by ACPI/IORT. In this case, NUMA topology of those platform devices are exported by firmware as well. Software might care about the numa_node of those devices in order to achieve NUMA locality. This patch will show the numa_node for this kind of devices in sysfs. For those platform devices without numa, numa_node won't be visible. Cc: Prime Zeng <prime.zeng@hisilicon.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Link: https://lore.kernel.org/r/20200619030045.81956-1-song.bao.hua@hisilicon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Maxim Uvarov
|
58df195cd4 |
optee: use uuid for sysfs driver entry
With the evolving use-cases for TEE bus, now it's required to support multi-stage enumeration process. But using a simple index doesn't suffice this requirement and instead leads to duplicate sysfs entries. So instead switch to use more informative device UUID for sysfs entry like: /sys/bus/tee/devices/optee-ta-<uuid> Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> |
||
Daeho Jeong
|
0e5e81114d |
f2fs: add GC_URGENT_LOW mode in gc_urgent
Added a new gc_urgent mode, GC_URGENT_LOW, in which mode F2FS will lower the bar of checking idle in order to process outstanding discard commands and GC a little bit aggressively. Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Arnd Bergmann
|
86aa160820 |
SoC attributes update for v5.9
1. Addition of ARM SMCCC ARCH_SOC_ID support
2. Usage of the custom soc attribute groups already supported in the
infrastucture instead of device_create_file which eliminates the need
for any cleanup when soc is unregistered
3. Minor clean up switching to use standard DEVICE_ATTR_RO() instead of
direct __ATTR
-----BEGIN PGP SIGNATURE-----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=JTXs
-----END PGP SIGNATURE-----
Merge tag 'soc-attr-updates-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
SoC attributes update for v5.9
1. Addition of ARM SMCCC ARCH_SOC_ID support
2. Usage of the custom soc attribute groups already supported in the
infrastucture instead of device_create_file which eliminates the need
for any cleanup when soc is unregistered
3. Minor clean up switching to use standard DEVICE_ATTR_RO() instead of
direct __ATTR
* tag 'soc-attr-updates-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: smccc: Add ARCH_SOC_ID support
ARM: OMAP2: Use custom soc attribute group instead of device_create_file
ARM: OMAP2: Switch to use DEVICE_ATTR_RO()
soc: ux500: Use custom soc attribute group instead of device_create_file
soc: ux500: Switch to use DEVICE_ATTR_RO()
soc: integrator: Use custom soc attribute group instead of device_create_file
soc: integrator: Switch to use DEVICE_ATTR_RO()
soc: realview: Use custom soc attribute group instead of device_create_file
soc: realview: Switch to use DEVICE_ATTR_RO()
Link: https://lore.kernel.org/r/20200706165312.40697-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
Sudeep Holla
|
821b67fa46 |
firmware: smccc: Add ARCH_SOC_ID support
SMCCC v1.2 adds a new optional function SMCCC_ARCH_SOC_ID to obtain a SiP defined SoC identification value. Add support for the same. Also using the SoC bus infrastructure, let us expose the platform specific SoC atrributes under sysfs. There are various ways in which it can be represented in shortened form for efficiency and ease of parsing for userspace. The chosen form is described in the ABI document. Link: https://lore.kernel.org/r/20200625095939.50861-1-sudeep.holla@arm.com Cc: Etienne Carriere <etienne.carriere@st.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
Peter Zijlstra
|
78c2141b65 | Merge branch 'perf/vlbr' | ||
Richard Gong
|
f38018968f |
firmware: rsu: add device attributes to sysfs interface
Add the following device attributes to Intel Stratix10 Remote System Update (RSU) sysfs interface: dcmf0 dcmf1 dcmf2 dcmf3 max_retry Signed-off-by: Richard Gong <richard.gong@intel.com> Link: https://lore.kernel.org/r/1592231348-31334-5-git-send-email-richard.gong@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Mario Limonciello
|
1cb3629383 |
thunderbolt: Add support for authenticate on disconnect
Some external devices can support completing thunderbolt authentication when they are unplugged. For this to work though, the link controller must remain operational. The only device known to support this right now is the Dell WD19TB, so add a quirk for this. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
||
|
Mario Limonciello
|
4b794f8066 |
thunderbolt: Add support for separating the flush to SPI and authenticate
This allows userspace to have a shorter period of time that the device is unusable and to call it at a more convenient time. For example flushing the image may happen while the user is using the machine and authenticating/rebooting may happen while logging out. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
||
|
Linus Torvalds
|
7eb8f53b8a |
USB fixes for 5.8-rc3
Here are some small USB fixes for 5.8-rc3 to resolve some reported issues. Nothing major here: - gadget driver fixes - cdns3 driver fixes - xhci fixes - renesas_usbhs driver fixes - some new device support with ids - documentation update All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXvcu5w8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymcewCgrSLzmFCeXWeoK5qIyv+hRaBu1eoAoJ2eDihC 5ahPGEU1CGstW3Rp0Yhv =LAT6 -----END PGP SIGNATURE----- Merge tag 'usb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.8-rc3 to resolve some reported issues. Nothing major here: - gadget driver fixes - cdns3 driver fixes - xhci fixes - renesas_usbhs driver fixes - some new device support with ids - documentation update All of these have been in linux-next with no reported issues" * tag 'usb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits) usb: renesas_usbhs: getting residue from callback_result Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk" xhci: Poll for U0 after disabling USB2 LPM xhci: Return if xHCI doesn't support LPM usb: host: xhci-mtk: avoid runtime suspend when removing hcd xhci: Fix enumeration issue when setting max packet size for FS devices. xhci: Fix incorrect EP_STATE_MASK usb: cdns3: ep0: add spinlock for cdns3_check_new_setup usb: cdns3: trace: using correct dir value usb: cdns3: ep0: fix the test mode set incorrectly Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk" usb: gadget: udc: Potential Oops in error handling code usb: phy: tegra: Fix unnecessary check in tegra_usb_phy_probe() usb: dwc3: pci: Fix reference count leak in dwc3_pci_resume_work usb: cdns3: ep0: add spinlock for cdns3_check_new_setup usb: cdns3: trace: using correct dir value usb: cdns3: ep0: fix the test mode set incorrectly usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs USB: ohci-sm501: Add missed iounmap() in remove cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip ... |
||
Tomasz Duszynski
|
64b3d8b1b0 |
iio: chemical: scd30: add core driver
Add Sensirion SCD30 carbon dioxide core driver. Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Jean-Baptiste Maneyrol
|
6c1b4524bf |
Documentation: ABI: add specific icm42600 documentation
Hardware offset available as calibscale sysfs attributes are real physical values exprimed in SI units. calibscale_available sysfs attributes represents the range of acceptable values. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Mauro Carvalho Chehab
|
bbea2aa335 |
docs: ABI: fix a typo when pointing to w1-generic.rst
There's a typo there:
w1_generic.rst -> w1-generic.rst
Causing the document reference to point to the wrong place.
Fixes:
|
||
|
Greg Kroah-Hartman
|
603ea288dc |
Merge 5.8-rc2 into usb-linus
Felipe has based his patches on that tag, so update my usb-linus branch to it as well so that I can pull his patches in here easier. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Dave Jiang
|
77522b2191 |
dmaengine: idxd: add leading / for sysfspath in ABI documentation
Correct to standard convention. All sysfs paths seem to be missing leading /. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/159225447176.68253.2922149693913698177.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
Kranthi Kuntala
|
dacb12877d |
thunderbolt: Add support for on-board retimers
USB4 spec specifies standard access to retimers (both on-board and cable) through USB4 port sideband access. This makes it possible to upgrade their firmware in the same way than we already do with the routers. This enumerates on-board retimers under each USB4 port when the link comes up and adds them to the bus under the router the retimer belongs to. Retimers are exposed in sysfs with name like <device>:<port>.<index> where device is the router the retimer belongs to, port is the USB4 port the retimer is connected to and index is the retimer index under that port (starting from 1). This applies to the upstream USB4 port as well so if there is on-board retimer between the port and the router it is also added accordingly. At this time we do not add cable retimers but there is no techincal restriction to do so in the future if needed. It is not clear whether it makes sense to upgrade their firmwares and at least Thunderbolt 3 cables it has not been done outside of lab environments. The sysfs interface is made to follow the router NVM upgrade to make it easy to extend the existing userspace (fwupd) to handle these as well. Signed-off-by: Kranthi Kuntala <kranthi.kuntala@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
||
Jason A. Donenfeld
|
625d344978 |
Revert "kernel/printk: add kmsg SEEK_CUR handling"
This reverts commit
|
||
Asutosh Das
|
f51853fc06 |
scsi: ufs: docs: Add WriteBooster documentation
Adds sysfs documentation for WriteBooster entries. Link: https://lore.kernel.org/r/1591723067-22998-1-git-send-email-asutoshd@codeaurora.org Acked-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
Fabio Estevam
|
3d19946b50 |
Documentation: ABI: usb: chipidea: Update Li Jun's e-mail
The freescale.com e-mail domain is no longer active for quite some time. Switch Li Jun's e-mail address to the NXP domain. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20200529104234.25136-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Vaibhav Jain
|
b791abf320 |
powerpc/papr_scm: Fetch nvdimm health information from PHYP
Implement support for fetching nvdimm health information via
H_SCM_HEALTH hcall as documented in Ref[1]. The hcall returns a pair
of 64-bit bitmap, bitwise-and of which is then stored in
'struct papr_scm_priv' and subsequently partially exposed to
user-space via newly introduced dimm specific attribute
'papr/flags'. Since the hcall is costly, the health information is
cached and only re-queried, 60s after the previous successful hcall.
The patch also adds a documentation text describing flags reported by
the the new sysfs attribute 'papr/flags' is also introduced at
Documentation/ABI/testing/sysfs-bus-papr-pmem.
[1] commit
|
||
Roman Sudarikov
|
bb42b3d397 |
perf/x86/intel/uncore: Expose an Uncore unit to IIO PMON mapping
Current version supports a server line starting Intel® Xeon® Processor
Scalable Family and introduces mapping for IIO Uncore units only.
Other units can be added on demand.
IIO stack to PMON mapping is exposed through:
/sys/devices/uncore_iio_<pmu_idx>/dieX
where dieX is file which holds "Segment:Root Bus" for PCIe root port,
which can be monitored by that IIO PMON block.
Details are explained in Documentation/ABI/testing/sysfs-devices-mapping
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Roman Sudarikov <roman.sudarikov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lkml.kernel.org/r/20200601083543.30011-4-alexander.antonov@linux.intel.com
|
||
|
Tomasz Duszynski
|
df16c33a40 |
iio: improve IIO_CONCENTRATION channel type description
IIO_CONCENTRATION together with INFO_RAW specifier is used for reporting
raw concentrations of pollutants. Raw value should be meaningless
before being properly scaled. Because of that description shouldn't
mention raw value unit whatsoever.
Fix this by rephrasing existing description so it follows conventions
used throughout IIO ABI docs.
Fixes:
|
||
|
Linus Torvalds
|
3a2a875174 |
power supply and reset changes for the v5.8 series
kobject:
* Increase number of allowed uevent variables
power-supply core:
* Add power-supply type in uevent
* Cleanup property handling in core
* Make property and usb_type pointers const
* Convert core power-supply DT binding to YAML
* Cleanup HWMON code
* Add new health status "calibration required"
* Add new properties for manufacture date and
capacity error margin
battery drivers:
* new cw2015 battery driver used by pine64 Pinebook Pro laptop
* axp22: blacklist on Meegopad T02
* sc27xx: support current/voltage reading
* max17042: support time-to-empty reading
* simple-battery: add more battery parameters
* bq27xxx: convert DT binding document to YAML
* sbs-battery: add TI BQ20Z65 support, fix technology property, convert
DT binding to YAML, add option to disable charger
broadcasts, add new properties: manufacture date,
capacity error margin, average current, charge current
and voltage and support calibration required health
status
* misc. fixes
charger drivers:
* bq25890: cleanup, implement charge type, precharge current and input
current limiting properties
* bd70528: use new linear range helper library
* bd99954: new charger driver
* mp2629: new charger driver
* misc. fixes
reboot drivers:
* oxnas-restart: introduce new driver
* syscon-reboot: convert DT binding to YAML, add parent syscon device support
* misc. fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAl7a2L0ACgkQ2O7X88g7
+poAIg//caN2sHqOFEsukXWe1oft/X0IQeGNmlCnj55l1zGJ/x03Yn0GeKb0FZgM
go+sfMaM/a6NNdmKhseLIsYFlhVBa2E7qW1nvaxgt66JKS+GXAHfE8LWVwazDJex
rq0esXuegsqFdbCUth81YLk2H+0qwnhVVv/Urvv1RaE/woeFHAHL1cYfcFa+YDXm
XRDT0W73YozslFkMnZMLBLyQzad3yVnNcnRYF3Dx0CMnUsjGfPjBlyk4RLPTcgUk
8ChTvCcHRG7IhEtF0a1HUr3UjCy9rjwiqWIobQltnbEYImxY0LWkCVVr1EsNjeyr
ikl3c4JfwmdlVCBCSPn294mPlGKu8DNBMLN1IgAuJHKW1GuQxd0Tcbd9OwF6VlVj
WTFWp2GcoIjKQtOWKDeCqby+hoWhgclxTHUudo7FGTT0xBP9OWTKWDpDL18cZWd8
dNCFMEI6MDMRtwL8+3ilLcnvSoMzyZ94TZmwii9toD3xSI7TMn7oVRuOlq1TkOEw
ZuPS3QP6jBHm8NN9JEhLbrwradP+R8qpE/jpsnWiBDR6Jt7xx4W7W0xupq4GdHAl
u0Lbh38/0bkTijeo9xoPe03KsSBV8HOr9Lf/QVW3zLcYcGKW17j8QTkes3a0bOs0
DZHVCFeXuWNFa/tJxe6c+J+NsroLucTMwA3lBmlZhI/TPsG2vb8=
=He9L
-----END PGP SIGNATURE-----
Merge tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"This time there are lots of changes. Quite a few changes to the core,
lots of driver changes and one change to kobject core (with Ack from
Greg).
Summary:
kobject:
- Increase number of allowed uevent variables
power-supply core:
- Add power-supply type in uevent
- Cleanup property handling in core
- Make property and usb_type pointers const
- Convert core power-supply DT binding to YAML
- Cleanup HWMON code
- Add new health status "calibration required"
- Add new properties for manufacture date and capacity error margin
battery drivers:
- new cw2015 battery driver used by pine64 Pinebook Pro laptop
- axp22: blacklist on Meegopad T02
- sc27xx: support current/voltage reading
- max17042: support time-to-empty reading
- simple-battery: add more battery parameters
- bq27xxx: convert DT binding document to YAML
- sbs-battery: add TI BQ20Z65 support, fix technology property,
convert DT binding to YAML, add option to disable charger
broadcasts, add new properties: manufacture date, capacity
error margin, average current, charge current and voltage and
support calibration required health status
- misc fixes
charger drivers:
- bq25890: cleanup, implement charge type, precharge current and
input current limiting properties
- bd70528: use new linear range helper library
- bd99954: new charger driver
- mp2629: new charger driver
- misc fixes
reboot drivers:
- oxnas-restart: introduce new driver
- syscon-reboot: convert DT binding to YAML, add parent syscon device
support
- misc fixes"
* tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (85 commits)
power: supply: cw2015: Attach OF ID table to the driver
power: reset: gpio-poweroff: add missing '\n' in dev_err()
Revert "power: supply: sbs-battery: simplify read_read_string_data"
Revert "power: supply: sbs-battery: add PEC support"
dt-bindings: power: sbs-battery: Convert to yaml
power: supply: sbs-battery: constify power-supply property array
power: supply: sbs-battery: switch to i2c's probe_new
power: supply: sbs-battery: switch from of_property_* to device_property_*
power: supply: sbs-battery: add ability to disable charger broadcasts
power: supply: sbs-battery: fix idle battery status
power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support
power: supply: sbs-battery: add MANUFACTURE_DATE support
power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support
power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support
power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support
power: supply: sbs-battery: add PEC support
power: supply: sbs-battery: simplify read_read_string_data
power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support
power: supply: sbs-battery: Add TI BQ20Z65 support
power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED
...
|
||
|
Linus Torvalds
|
c90e7945e3 |
dmaengine updates for v5.8-rc1
Bunch of updates to drivers like dmatest, dw-edma, ioat, mmp-tdma and k3-udma along with Renesas binding update to json-schema -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl7fdVEACgkQfBQHDyUj g0e7PBAAhtKUb1hbx9OR9Wm4l0ZPgheip0Ai8zWjAXaM0au/OhGbYrss7ilRySYL ORUZqCp0/972w7oyHeHeNu2gxvbg8ouYCSTEftF4v78UPToYmoVYjUHVgxyLEeQ4 i+B/K2sa96WYa0D64T3cDi7Vmf61ouB86Do7iIU8LZJuiS18Smyz5dfAUNCWZ7br rREDnJ6QPjoWMpdz/toYkYxChBWN7td8Zve1u0LUEFXt/OG6jpfv4Dg2jJ+j5E4V TGmV5p+7YVpuxmi1ab/MEOTWdG1rckhr85/+Fxy55V+BH8GaU5GEzeFg/5gIwypp it4dbPRq/fUPmuuWA+o2BYDC3ytJuFP/UQkCvxazT1OQS5xSHFHZXQYKOkRGZWln jNGML2CTTRe4JvRDU1rlLtQjSjlyF9Gt/5fRYkJQsJYByJhpvgp1+Fsuv8e2TFGX hhPH/RJJ04nhyHMjH6WBea+3BiUDHk9nxTPxeefu3tpF779vYmBXgO70thYt+J7d oJwegyfwJmgv7ZyItgQC+oo9AOVyByXrELuPgbFxHCnxNXjE8Xzu7lxjI3SX1zn2 1tFX7yqJamR0s7EFwMDVBsG2SqUr/XKmruEUxt+VWIM/UjDrVvDPnqQ0koziRNV6 dWClV/+QuOXKo349bDQUMjUp7gBub6lHCIJ2U428Y/pckgsOWac= =Jun4 -----END PGP SIGNATURE----- Merge tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine updates from Vinod Koul: "A fairly small dmaengine update which includes mostly driver updates (dmatest, dw-edma, ioat, mmp-tdma and k3-udma) along with Renesas binding update to json-schema" * tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (39 commits) dmaengine: imx-sdma: initialize all script addresses dmaengine: ti: k3-udma: Use proper return code in alloc_chan_resources dmaengine: ti: k3-udma: Remove udma_chan.in_ring_cnt dmaengine: ti: k3-udma: Add missing dma_sync call for rx flush descriptor dmaengine: at_xdmac: Replace zero-length array with flexible-array dmaengine: at_hdmac: Replace zero-length array with flexible-array dmaengine: qcom: bam_dma: Replace zero-length array with flexible-array dmaengine: ti: k3-udma: Use PTR_ERR_OR_ZERO() to simplify code dmaengine: moxart-dma: Drop pointless static qualifier in moxart_probe() dmaengine: sf-pdma: Simplify the error handling path in 'sf_pdma_probe()' dmaengine: qcom_hidma: use true,false for bool variable dmaengine: dw-edma: support local dma device transfer semantics dmaengine: Fix doc strings to satisfy validation script dmaengine: Include dmaengine.h into dmaengine.c dmaengine: dmatest: Describe members of struct dmatest_info dmaengine: dmatest: Describe members of struct dmatest_params dmaengine: dmatest: Allow negative timeout value to specify infinite wait Revert "dmaengine: dmatest: timeout value of -1 should specify infinite wait" dmaengine: stm32-dma: direct mode support through device tree dt-bindings: dma: add direct mode support through device tree in stm32-dma ... |
||
|
Linus Torvalds
|
42612e7763 |
f2fs-for-5.8-rc1
In this round, we've added some knobs to enhance compression feature and harden testing environment. In addition, we've fixed several bugs reported from Android devices such as long discarding latency, device hanging during quota_sync, etc. Enhancement: - support lzo-rle algorithm - add two ioctls to release and reserve blocks for compression - support partial truncation/fiemap on compressed file - introduce sysfs entries to attach IO flags explicitly - add iostat trace point along with read io stat Bug fix: - fix long discard latency - flush quota data by f2fs_quota_sync correctly - fix to recover parent inode number for power-cut recovery - fix lz4/zstd output buffer budget - parse checkpoint mount option correctly - avoid inifinite loop to wait for flushing node/meta pages - manage discard space correctly And some refactoring and clean up patches were added. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAl7fojgACgkQQBSofoJI UNKaZQ//Rd6r7Z25SJkAoy+y/m6QDaKg4Ap1wR6+QmirR7HNxtpr3dXSVvmj4Xhu ZDJ3LHmerFiwR/X4zFPud+PAoBe3gJa2k7GT8q0g4YkgLy0hfX9PXt0t3I9F8vlk 8m34j+hQaL9/3FBK4/PSG541vR/UUnwvu6t2pJMnz7rgnLej5I6yOIaoaihz7m+i k0ofK5ckuTNcZReAZ2tCIehQku7tDOBLdS5KxvBZBgRh0i5iSXXIa4ddvaMJdT/M WcjTZ6N8bFu0hCZ5hz9dyGGYo1XchQosLdLGhcEugsyxNp9Yuftyf5/Ie1wJNiEl ZsoRc15X7wfRPKKMMyDFljzPBPFiHr78p30uJ34bcYCu0j0CYi+gbKQztmEMZ2dy 9M+sDG3jd5R7ACXrwS2ElSEDyLBnTaxbeSdCpErGjn/U19TLllbzhnMA9KR9elDI pEWgRc7DPmPbRZaStXMxIamf7pbmUSm0akAYbzGFvMHcSx4MXuQFICGK9t/mhSDm sO2b1Ir39yk65sVNdjFsnqDsi6jTPgrLSe3FY4eMhkn15OSiVGhcz7ddQMD7Fbuq WLpHFqER650I28i0EXh8bxzjkrj+aJQKhGcVbmwVS33MtKVfBdh4GfQMvS6MbeOM MsZ10E7Dr9ildKxqHP5SgLlggkl512lpj3+d6j0mUSSSUP2jtUw= =MiEC -----END PGP SIGNATURE----- Merge tag 'f2fs-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've added some knobs to enhance compression feature and harden testing environment. In addition, we've fixed several bugs reported from Android devices such as long discarding latency, device hanging during quota_sync, etc. Enhancements: - support lzo-rle algorithm - add two ioctls to release and reserve blocks for compression - support partial truncation/fiemap on compressed file - introduce sysfs entries to attach IO flags explicitly - add iostat trace point along with read io stat Bug fixes: - fix long discard latency - flush quota data by f2fs_quota_sync correctly - fix to recover parent inode number for power-cut recovery - fix lz4/zstd output buffer budget - parse checkpoint mount option correctly - avoid inifinite loop to wait for flushing node/meta pages - manage discard space correctly And some refactoring and clean up patches were added" * tag 'f2fs-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits) f2fs: attach IO flags to the missing cases f2fs: add node_io_flag for bio flags likewise data_io_flag f2fs: remove unused parameter of f2fs_put_rpages_mapping() f2fs: handle readonly filesystem in f2fs_ioc_shutdown() f2fs: avoid utf8_strncasecmp() with unstable name f2fs: don't return vmalloc() memory from f2fs_kmalloc() f2fs: fix retry logic in f2fs_write_cache_pages() f2fs: fix wrong discard space f2fs: compress: don't compress any datas after cp stop f2fs: remove unneeded return value of __insert_discard_tree() f2fs: fix wrong value of tracepoint parameter f2fs: protect new segment allocation in expand_inode_data f2fs: code cleanup by removing ifdef macro surrounding f2fs: avoid inifinite loop to wait for flushing node pages at cp_error f2fs: flush dirty meta pages when flushing them f2fs: fix checkpoint=disable:%u%% f2fs: compress: fix zstd data corruption f2fs: add compressed/gc data read IO stat f2fs: fix potential use-after-free issue f2fs: compress: don't handle non-compressed data in workqueue ... |
||
|
Linus Torvalds
|
8b4d37db9a |
Merge branch 'x86/srbds' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 srbds fixes from Thomas Gleixner:
"The 9th episode of the dime novel "The performance killer" with the
subtitle "Slow Randomizing Boosts Denial of Service".
SRBDS is an MDS-like speculative side channel that can leak bits from
the random number generator (RNG) across cores and threads. New
microcode serializes the processor access during the execution of
RDRAND and RDSEED. This ensures that the shared buffer is overwritten
before it is released for reuse. This is equivalent to a full bus
lock, which means that many threads running the RNG instructions in
parallel have the same effect as the same amount of threads issuing a
locked instruction targeting an address which requires locking of two
cachelines at once.
The mitigation support comes with the usual pile of unpleasant
ingredients:
- command line options
- sysfs file
- microcode checks
- a list of vulnerable CPUs identified by model and stepping this
time which requires stepping match support for the cpu match logic.
- the inevitable slowdown of affected CPUs"
* branch 'x86/srbds' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Add Ivy Bridge to affected list
x86/speculation: Add SRBDS vulnerability and mitigation documentation
x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation
x86/cpu: Add 'table' argument to cpu_matches()
|
||
|
Jaegeuk Kim
|
32b6aba85c |
f2fs: add node_io_flag for bio flags likewise data_io_flag
This patch adds another way to attach bio flags to node writes.
Description: Give a way to attach REQ_META|FUA to node writes
given temperature-based bits. Now the bits indicate:
* REQ_META | REQ_FUA |
* 5 | 4 | 3 | 2 | 1 | 0 |
* Cold | Warm | Hot | Cold | Warm | Hot |
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
||
|
Linus Torvalds
|
9aa900c809 |
Char/Misc driver patches for 5.8-rc1
Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzkHw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yldOwCgus/DgpnI1UL4z+NdBxJrAXtkPmgAn2sgTUea i5RblCmcVMqvHaGtYkY+ =tScN -----END PGP SIGNATURE----- Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ... |
||
|
Linus Torvalds
|
80ef846e99 |
Staging/IIO driver patches for 5.8-rc1
Here is the large set of staging and IIO driver changes for 5.8-rc1 Nothing major, but a lot of new IIO drivers are included in here, along with other core iio cleanups and changes. On the staging driver front, again, nothing noticable. No new deletions or additions, just a ton of tiny cleanups all over the tree done by a lot of different people. Most coding style, but many actual real fixes and cleanups that are nice to see. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzoAQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ym9FwCgkW8WZJGnvHLjuuG8C01azCEh/KUAoJRji8jK 4zCG8NxAPFsQ1QP2SZPq =jEyw -----END PGP SIGNATURE----- Merge tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver updates from Greg KH: "Here is the large set of staging and IIO driver changes for 5.8-rc1 Nothing major, but a lot of new IIO drivers are included in here, along with other core iio cleanups and changes. On the staging driver front, again, nothing noticable. No new deletions or additions, just a ton of tiny cleanups all over the tree done by a lot of different people. Most coding style, but many actual real fixes and cleanups that are nice to see. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (618 commits) staging: rtl8723bs: Use common packet header constants staging: sm750fb: Add names to proc_setBLANK args staging: most: usb: init return value in default path of switch/case expression staging: vchiq: Get rid of VCHIQ_SERVICE_OPENEND callback reason staging: vchiq: move vchiq_release_message() into vchiq staging: vchi: Get rid of C++ guards staging: vchi: Get rid of not implemented function declarations staging: vchi: Get rid of vchiq_status_to_vchi() staging: vchi: Get rid of vchi_service_set_option() staging: vchi: Merge vchi_msg_queue() into vchi_queue_kernel_message() staging: vchiq: Move copy callback handling into vchiq staging: vchi: Get rid of vchi_queue_user_message() staging: vchi: Get rid of vchi_service_destroy() staging: most: usb: use function sysfs_streq staging: most: usb: add missing put_device calls staging: most: usb: use correct error codes staging: most: usb: replace code to calculate array index staging: most: usb: don't use error path to exit function on success staging: most: usb: move allocation of URB out of critical section staging: most: usb: return 0 instead of variable ... |
||
|
Linus Torvalds
|
242b233198 |
RDMA 5.8 merge window pull request
A few large, long discussed works this time. The RNBD block driver has
been posted for nearly two years now, and the removal of FMR has been a
recurring discussion theme for a long time. The usual smattering of
features and bug fixes.
- Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
- Continuing driver cleanups in bnxt_re, hns
- Big cleanup of mlx5 QP creation flows
- More consistent use of src port and flow label when LAG is used and a
mlx5 implementation
- Additional set of cleanups for IB CM
- 'RNBD' network block driver and target. This is a network block RDMA
device specific to ionos's cloud environment. It brings strong multipath
and resiliency capabilities.
- Accelerated IPoIB for HFI1
- QP/WQ/SRQ ioctl migration for uverbs, and support for multiple async fds
- Support for exchanging the new IBTA defiend ECE data during RDMA CM
exchanges
- Removal of the very old and insecure FMR interface from all ULPs and
drivers. FRWR should be preferred for at least a decade now.
-----BEGIN PGP SIGNATURE-----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=9zTe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A more active cycle than most of the recent past, with a few large,
long discussed works this time.
The RNBD block driver has been posted for nearly two years now, and
flowing through RDMA due to it also introducing a new ULP.
The removal of FMR has been a recurring discussion theme for a long
time.
And the usual smattering of features and bug fixes.
Summary:
- Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
- Continuing driver cleanups in bnxt_re, hns
- Big cleanup of mlx5 QP creation flows
- More consistent use of src port and flow label when LAG is used and
a mlx5 implementation
- Additional set of cleanups for IB CM
- 'RNBD' network block driver and target. This is a network block
RDMA device specific to ionos's cloud environment. It brings strong
multipath and resiliency capabilities.
- Accelerated IPoIB for HFI1
- QP/WQ/SRQ ioctl migration for uverbs, and support for multiple
async fds
- Support for exchanging the new IBTA defiend ECE data during RDMA CM
exchanges
- Removal of the very old and insecure FMR interface from all ULPs
and drivers. FRWR should be preferred for at least a decade now"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits)
RDMA/cm: Spurious WARNING triggered in cm_destroy_id()
RDMA/mlx5: Return ECE DC support
RDMA/mlx5: Don't rely on FW to set zeros in ECE response
RDMA/mlx5: Return an error if copy_to_user fails
IB/hfi1: Use free_netdev() in hfi1_netdev_free()
RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr()
RDMA/core: Move and rename trace_cm_id_create()
IB/hfi1: Fix hfi1_netdev_rx_init() error handling
RDMA: Remove 'max_map_per_fmr'
RDMA: Remove 'max_fmr'
RDMA/core: Remove FMR device ops
RDMA/rdmavt: Remove FMR memory registration
RDMA/mthca: Remove FMR support for memory registration
RDMA/mlx4: Remove FMR support for memory registration
RDMA/i40iw: Remove FMR leftovers
RDMA/bnxt_re: Remove FMR leftovers
RDMA/mlx5: Remove FMR leftovers
RDMA/core: Remove FMR pool API
RDMA/rds: Remove FMR support for memory registration
RDMA/srp: Remove support for FMR memory registration
...
|
||
|
Linus Torvalds
|
7ae77150d9 |
powerpc updates for 5.8
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to make it
safe against parallel page table manipulations without relying on an IPI for
serialisation.
- A series of fixes & enhancements to make our machine check handling more
robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions on
Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
Sang, Xiongfeng Wang.
-----BEGIN PGP SIGNATURE-----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=o0WU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
|
||
|
Linus Torvalds
|
512b7d37ee |
- Core Frameworks
- Constify 'properties' attribute in core header file
- New Drivers
- Add support for Gateworks System Controller
- Add support for MediaTek MT6358 PMIC
- Add support for Mediatek MT6360 PMIC
- Add support for Monolithic Power Systems MP2629 ADC and Battery charger
- Rework Intel's SCU IPC collection
- Eliminate near duplicate IPC functionality
- Split out MFD related activities into a dedicated MFD driver
- Fix-ups
- Use new I2C API; htc-i2cpld
- Remove superfluous code; sprd-sc27xx-spi
- Improve error handling; stm32-timers
- Device Tree additions/fixes; mt6397
- Defer probe betterment; wm8994-core
- Improve module handling; wm8994-core
- Staticify; stpmic1
- Trivial (spelling, formatting); tqmx86
- Bug Fixes
- Fix incorrect register/PCI IDs; intel-lpss-pci
- Fix unbalanced Regulator API calls; wm8994-core
- Fix double free(); wcd934x
- Remove IRQ domain on failure; stmfx
- Reset chip on resume; stmfx
- Disable/enable IRQs on suspend/resume; stmfx
- Do not use bulk writes on H/W which does not support them; max77620
-----BEGIN PGP SIGNATURE-----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=746a
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Constify 'properties' attribute in core header file
New Drivers:
- Add support for Gateworks System Controller
- Add support for MediaTek MT6358 PMIC
- Add support for Mediatek MT6360 PMIC
- Add support for Monolithic Power Systems MP2629 ADC and Battery charger
Fix-ups:
- Use new I2C API in htc-i2cpld
- Remove superfluous code in sprd-sc27xx-spi
- Improve error handling in stm32-timers
- Device Tree additions/fixes in mt6397
- Defer probe betterment in wm8994-core
- Improve module handling in wm8994-core
- Staticify in stpmic1
- Trivial (spelling, formatting) in tqmx86
Bug Fixes:
- Fix incorrect register/PCI IDs in intel-lpss-pci
- Fix unbalanced Regulator API calls in wm8994-core
- Fix double free() in wcd934x
- Remove IRQ domain on failure in stmfx
- Reset chip on resume in stmfx
- Disable/enable IRQs on suspend/resume in stmfx
- Do not use bulk writes on H/W which does not support them in max77620"
* tag 'mfd-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (29 commits)
mfd: mt6360: Remove duplicate REGMAP_IRQ_REG_LINE() entry
mfd: Add support for PMIC MT6360
mfd: max77620: Use single-byte writes on MAX77620
mfd: wcd934x: Drop kfree for memory allocated with devm_kzalloc
mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt
mfd: stmfx: Fix stmfx_irq_init error path
mfd: stmfx: Reset chip on resume as supply was disabled
mfd: wm8994: Silence warning about supplies during deferred probe
mfd: wm8994: Fix unbalanced calls to regulator_bulk_disable()
mfd: wm8994: Fix driver operation if loaded as modules
dt-bindings: mfd: mediatek: Add MT6397 Pin Controller
mfd: Constify properties in mfd_cell
mfd: stm32-timers: Use dma_request_chan() instead dma_request_slave_channel()
mfd: sprd: Remove unnecessary spi_bus_type setting
mfd: intel-lpss: Update LPSS UART #2 PCI ID for Jasper Lake
mfd: tqmx86: Fix a typo in MODULE_DESCRIPTION
mfd: stpmic1: Make stpmic1_regmap_config static
mfd: htc-i2cpld: Convert to use i2c_new_client_device()
MAINTAINERS: Add entry for mp2629 Battery Charger driver
power: supply: mp2629: Add impedance compensation config
...
|
||
|
Linus Torvalds
|
a98f670e41 |
media updates for v5.8-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl7XUmwACgkQCF8+vY7k 4RU4zg//fT32wiVAPHCCp+pDZVnWNeipXE1gnpqghd/qZXfzBPiLEC9sPS74VVkA jf1hhR33VZpKAKTPg/b074qhRZBywEOdHZnT/0CEE1oNB61shVOnyDYzLGSq95cO 6V55ovbi5IOkrg0QEJbHpG5YHzt+pq5XeWOkqGNsHwla7N7iMGMVYfHepVVDWPnZ 0wGYFF9cAJP+X/uxqkZLDVMA/K1I+QKh6vrj/qx53/eRt8VID3+i8ig3guk4PlUq 7RLw5w/CywtNaGE5zaz7T3i2eoED71JHOTXi6RxdP1z8IDvELZ9mT95GQ+enlwqt AS6Ju1sV40wviHMv5prJWQjJkrrtYH3S907lIjwBpQLNGbh2+5crCd/6CwumkGgv 1cCZ1dVmXpCe++9mU9AXmSkjsjGPStNcmHMOpc1Pwn9jUV3LQOOSDp8+RYdt1WHU Iw9cyM8NOpz5Mv/B1/ZPQ1gPb9lr1gE09XyUekxtAI/nl4nNHGWO8QDuX7Odfrv9 8nfo14lk/p6XCTA8dsWJCgI5B1fgnqD4frHKWO9Uctppc/KBW41c8JpQUjBNlG/T MhtlGwYMVgSQxpQ6wK018JUAFoWkn1Sr0zMKRayqCnMjMLHsaMwE6kq+LgmRBqbB ersKV/9ZLYqCU1d6PhEVG6xUs6GsWdLcyhALlmHsddPSdpFXdf8= =KNAo -----END PGP SIGNATURE----- Merge tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Media documentation is now split into admin-guide, driver-api and userspace-api books (a longstanding request from Jon); - The media Kconfig was reorganized, in order to make easier to select drivers and their dependencies; - The testing drivers now has a separate directory; - added a new driver for Rockchip Video Decoder IP; - The atomisp staging driver was resurrected. It is meant to work with 4 generations of cameras on Atom-based laptops, tablets and cell phones. So, it seems worth investing time to cleanup this driver and making it in good shape. - Added some V4L2 core ancillary routines to help with h264 codecs; - Added an ov2740 image sensor driver; - The si2157 gained support for Analog TV, which, in turn, added support for some cx231xx and cx23885 boards to also support analog standards; - Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera is located at the device; - VIDIOC_ENUM_FMT was extended to support MC-centric devices; - Lots of drivers improvements and cleanups. * tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits) media: Documentation: media: Refer to mbus format documentation from CSI-2 docs media: s5k5baf: Replace zero-length array with flexible-array media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h> media: i2c: Add ov2740 image sensor driver media: ov8856: Implement sensor module revision identification media: ov8856: Add devicetree support media: dt-bindings: ov8856: Document YAML bindings media: dvb-usb: Add Cinergy S2 PCIe Dual Port support media: dvbdev: Fix tuner->demod media controller link media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property media: atomisp: unify the version for isp2401 a0 and b0 versions media: atomisp: update TODO with the current data media: atomisp: adjust some code at sh_css that could be broken media: atomisp: don't produce errs for ignored IRQs media: atomisp: print IRQ when debugging media: atomisp: isp_mmu: don't use kmem_cache media: atomisp: add a notice about possible leak resources media: atomisp: disable the dynamic and reserved pools media: atomisp: turn on camera before setting it ... |
||
|
Linus Torvalds
|
cb8e59cc87 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
|
||
|
Linus Torvalds
|
118d6e9829 |
ACPI updates for 5.8-rc1
- Update the ACPICA code in the kernel to upstream revision
20200430:
* Move acpi_gbl_next_cmd_num definition (Erik Kaneda).
* Ignore AE_ALREADY_EXISTS status in the disassembler when parsing
create operators (Erik Kaneda).
* Add status checks to the dispatcher (Erik Kaneda).
* Fix required parameters for _NIG and _NIH (Erik Kaneda).
* Make acpi_protocol_lengths static (Yue Haibing).
- Fix ACPI table reference counting errors in several places, mostly
in error code paths (Hanjun Guo).
- Extend the Generic Event Device (GED) driver to support _Exx and
_Lxx handler methods (Ard Biesheuvel).
- Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug
code to use it (Hans de Goede).
- Add new DPTF battery participant driver and make the DPFT power
participant driver create more sysfs device attributes (Srinivas
Pandruvada).
- Improve the handling of memory failures in APEI (James Morse).
- Add new blacklist entry for Acer TravelMate 5735Z to the backlight
driver (Paul Menzel).
- Add i2c address for thermal control to the PMIC driver (Mauro
Carvalho Chehab).
- Allow the ACPI processor idle driver to work on platforms with
only one ACPI C-state present (Zhang Rui).
- Fix kobject reference count leaks in error code paths in two
places (Qiushi Wu).
- Delete unused proc filename macros and make some symbols static
(Pascal Terjan, Zheng Zengkai, Zou Wei).
-----BEGIN PGP SIGNATURE-----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=xH3i
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20200430, fix several reference counting errors related to ACPI
tables, add _Exx / _Lxx support to the GED driver, add a new
acpi_evaluate_reg() helper, add new DPTF battery participant driver
and extend the DPFT power participant driver, improve the handling of
memory failures in the APEI code, add a blacklist entry to the
backlight driver, update the PMIC driver and the processor idle
driver, fix two kobject reference count leaks, and make a few janitory
changes.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20200430:
- Move acpi_gbl_next_cmd_num definition (Erik Kaneda).
- Ignore AE_ALREADY_EXISTS status in the disassembler when parsing
create operators (Erik Kaneda).
- Add status checks to the dispatcher (Erik Kaneda).
- Fix required parameters for _NIG and _NIH (Erik Kaneda).
- Make acpi_protocol_lengths static (Yue Haibing).
- Fix ACPI table reference counting errors in several places, mostly
in error code paths (Hanjun Guo).
- Extend the Generic Event Device (GED) driver to support _Exx and
_Lxx handler methods (Ard Biesheuvel).
- Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug
code to use it (Hans de Goede).
- Add new DPTF battery participant driver and make the DPFT power
participant driver create more sysfs device attributes (Srinivas
Pandruvada).
- Improve the handling of memory failures in APEI (James Morse).
- Add new blacklist entry for Acer TravelMate 5735Z to the backlight
driver (Paul Menzel).
- Add i2c address for thermal control to the PMIC driver (Mauro
Carvalho Chehab).
- Allow the ACPI processor idle driver to work on platforms with only
one ACPI C-state present (Zhang Rui).
- Fix kobject reference count leaks in error code paths in two places
(Qiushi Wu).
- Delete unused proc filename macros and make some symbols static
(Pascal Terjan, Zheng Zengkai, Zou Wei)"
* tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe()
ACPI: sysfs: Fix reference count leak in acpi_sysfs_add_hotplug_profile()
ACPI: GED: use correct trigger type field in _Exx / _Lxx handling
ACPI: DPTF: Add battery participant driver
ACPI: DPTF: Additional sysfs attributes for power participant driver
ACPI: video: Use native backlight on Acer TravelMate 5735Z
arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work
ACPI: APEI: Kick the memory_failure() queue for synchronous errors
mm/memory-failure: Add memory_failure_queue_kick()
ACPI / PMIC: Add i2c address for thermal control
ACPI: GED: add support for _Exx / _Lxx handler methods
ACPI: Delete unused proc filename macros
ACPI: hotplug: PCI: Use the new acpi_evaluate_reg() helper
ACPI: utils: Add acpi_evaluate_reg() helper
ACPI: debug: Make two functions static
ACPI: sleep: Put the FACS table after using it
ACPI: scan: Put SPCR and STAO table after using it
ACPI: EC: Put the ACPI table after using it
ACPI: APEI: Put the HEST table for error path
ACPI: APEI: Put the error record serialization table for error path
...
|
||
|
Linus Torvalds
|
355ba37d75 |
Power management updates for 5.8-rc1
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in
the struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
* Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
* Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
* Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
* Fix wrong compatible binding in the qcom driver (Ansuel Smith).
* Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
* Add r8a7742 SoC support to the dt cpufreq driver (Lad Prabhakar).
- Update cpuidle core and drivers:
* Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
* Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
* Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver
and remove an unused local MSR definition from it (Jacob Pan,
Sumeet Pawnikar).
- Update devfreq core and drivers:
* Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
* Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
* Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl7VGjwSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRx46gP/jGAXlddFEQswi6qUT3Cff0A9mb8CdcX
dyKrjX4xxo/wtBIAwSN4achxrgse//ayo2dYTzWRDd31W9Azbv+5F+46XsDRz4hL
pH29u/E66NMtFWnHCmt78NEJn0FzSa0YBC43ZzwFwKktCK9skYIpGN2z6iuXUBSX
Q5GHqop3zvDsdKQFBGL62xvUw/AmOTPG7ohIZvqWBN2mbOqEqMcoFHT+aUF/NbLj
+i14dvTH767eDZGRVASmXWQyljjaRWm+SIw4+m8zT1D1Y3d5IFObuMN+9RQl1Tif
BYjkgJ2oDDMhCJLW7TBuJB+g7exiyaSQds3nMr2ZR+eZbJipICjU4eehNEKIUopU
DM17tHQfnwZfS/7YbCx3vYQwLkNq37AJyXS9uqCAIFM+0n4xN4/mIVmgWYISLDTs
1v9olFxtwMRNpjGGQWPJAO7ebB8Zz9qhQv7pIkSQEfwp93/SzvlVf4vvruTeFN9J
qqG60cDumXWAm+s43eQHJNn5nOd5ocWv0FBpo/cxqKbzxFVWwdB42Cm0SY+rK2ID
uHdnc2DJcK2c78UVbz3Cmk4272foJt2zxchqjFXXAZPLrOsFfzmti4B28VxGxjmP
LG3MhH5sdbF4yl/1aSC1Bnrt+PV9Lus6ut/VKhjwIpw8cqiXgpwSbMoDoaBd9UMQ
ubGz2rplGAtB
=APdj
-----END PGP SIGNATURE-----
Merge tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the system-wide PM driver flags, make runtime switching
of cpuidle governors easier, improve the user space hibernation
interface code, add intel-speed-select interface documentation, add
more debug messages to the ACPI code handling suspend to idle, update
the cpufreq core and drivers, fix a minor issue in the cpuidle core
and update two cpuidle drivers, improve the PM-runtime framework,
update the Intel RAPL power capping driver, update devfreq core and
drivers, and clean up the cpupower utility.
Specifics:
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in the
struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
- Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
- Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
- Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
- Fix wrong compatible binding in the qcom driver (Ansuel Smith).
- Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
- Add r8a7742 SoC support to the dt cpufreq driver (Lad
Prabhakar).
- Update cpuidle core and drivers:
- Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
- Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
- Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver and
remove an unused local MSR definition from it (Jacob Pan, Sumeet
Pawnikar).
- Update devfreq core and drivers:
- Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
- Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
- Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei)"
* tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits)
cpuidle: Fix three reference count leaks
PM: runtime: Replace pm_runtime_callbacks_present()
PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex
PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR
PM / devfreq: Replace strncpy with strscpy
PM / devfreq: imx: Register interconnect device
PM / devfreq: Add generic imx bus scaling driver
PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()
PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting
PM: hibernate: Restrict writes to the resume device
PM: runtime: clk: Fix clk_pm_runtime_get() error path
cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
ACPI: EC: PM: s2idle: Extend GPE dispatching debug message
ACPI: PM: s2idle: Print type of wakeup debug messages
powercap: RAPL: remove unused local MSR define
PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend()
Documentation: admin-guide: pm: Document intel-speed-select
PM: hibernate: Split off snapshot dev option
PM: hibernate: Incorporate concurrency handling
Documentation: ABI: make current_governer_ro as a candidate for removal
...
|
||
|
Linus Torvalds
|
a5a82e0a59 |
platform-drivers-x86 for v5.8-1
* Add a support of the media keys on the ASUS laptop UX325JA/UX425JA
* ASUS WMI driver can now handle 2-in-1 models T100TA, T100CHI, T100HA, T200TA
* Big refactoring of Intel SCU driver with Elkhart Lake support has been added
* Slim Bootloarder firmware update signaling WMI driver has been added
* Thinkpad ACPI driver can handle dual fan configuration on new P and X models
* Touchscreen DMI driver has been extended to support
- MP-man MPWIN895CL tablet
- ONDA V891 v5 tablet
- techBite Arc 11.6
- Trekstor Twin 10.1
- Trekstor Yourbook C11B
- Vinga J116
* Virtual Button driver got a few fixes to detect mode of 2-in-1 tablet models
* Intel Speed Select tools update
* Plenty of small cleanups here and there
The following is an automated git shortlog grouped by driver:
acerhdf:
- replace space by * in modalias
New drivers:
- Add Elkhart Lake SCU/PMC support
- Add Slim Bootloader firmware update signaling driver
asus-laptop:
- Drop duplicate check for led_classdev_unregister()
asus-nb-wmi:
- Revert "Do not load on Asus T100TA and T200TA"
- Do not load on Asus T100TA and T200TA
asus-wmi:
- Ignore WMI events with code 0x79
- Add support for SW_TABLET_MODE
- Move asus_wmi_input_init and _exit lower in the file
- Drop duplicate check for led_classdev_unregister()
- Reserve more space for struct bias_args
- remove redundant initialization of variable status
dcdbas:
- Check SMBIOS for protected buffer address
dell-laptop:
- don't register micmute LED if there is no token
dell-wmi:
- Ignore keyboard attached / detached events
device property:
- export set_secondary_fwnode() to modules
eeepc-laptop:
- Drop duplicate check for led_classdev_unregister()
hp-wmi:
- Introduce HPWMI_POWER_FW_OR_HW as convenient shortcut
- Convert simple_strtoul() to kstrtou32()
- Refactor postcode_store() to follow standard patterns
intel_cht_int33fe:
- Fix spelling issues
- Switch to use acpi_dev_hid_uid_match()
- Convert to use set_secondary_fwnode()
- Convert software node array to group
intel-hid:
- Add a quirk to support HP Spectre X2 (2015)
intel_mid_powerbtn:
- Convert to use new SCU IPC API
intel_pmc_core:
- avoid unused-function warnings
- Change Jasper Lake S0ix debug reg map back to ICL
intel_pmc_ipc:
- Convert to MFD
- Move PCI IDs to intel_scu_pcidrv.c
- Drop intel_pmc_ipc_command()
- Start using SCU IPC
intel_scu_ipc:
- Add managed function to register SCU IPC
- Introduce new SCU IPC API
- Move legacy SCU IPC API to a separate header
- Log more information if SCU IPC command fails
- Split out SCU IPC functionality from the SCU driver
intel_scu_ipcutil:
- Convert to use new SCU IPC API
intel-speed-select:
- Fix speed-select-base-freq-properties output on CLX-N
intel_telemetry:
- Add telemetry_get_pltdata()
- Convert to use new SCU IPC API
intel-vbtn:
- Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type
- Detect switch position before registering the input-device
- Move detect_tablet_mode() to higher in the file
- Fix probe failure on devices with only switches
- Also handle tablet-mode switch on "Detachable" and "Portable" chassis-types
- Do not advertise switches to userspace if they are not there
- Split keymap into buttons and switches parts
- Use acpi_evaluate_integer()
ISST:
- Increase timeout
lg-laptop:
- Drop duplicate check for led_classdev_unregister()
MAINTAINERS:
- Add me as maintainer of Intel SCU drivers
- Update entry for Intel Broxton PMC driver
Merges of immutable branches:
- Merge branch 'for-next'
- Merge branch 'ib-mfd-x86-usb-watchdog-v5.7'
- Merge branch 'ib-pdx86-properties'
mfd:
- intel_soc_pmic_mrfld: Convert to use new SCU IPC API
- intel_soc_pmic_bxtwc: Convert to use new SCU IPC API
- intel_soc_pmic: Add SCU IPC member to struct intel_soc_pmic
samsung-laptop:
- Drop duplicate check for led_classdev_unregister()
software node:
- Allow register and unregister software node groups
sony-laptop:
- Make resuming thermal profile safer
- SNC calls should handle BUFFER types
thinkpad_acpi:
- Replace custom approach by kstrtoint()
- Use strndup_user() in dispatch_proc_write()
- Replace next_cmd(&buf) with strsep(&buf, ",")
- Drop duplicate check for led_classdev_unregister()
- Remove always false 'value < 0' statement
- Add support for dual fan control
tools/power/x86/intel-speed-select:
- Fix invalid core mask
- Increase CPU count
- Fix json perf-profile output output
- Update version
- Enable clos for turbo-freq enable
- Fix CLX-N package information output
- Check support status before enable
- Change debug to error
toshiba_acpi:
- Drop duplicate check for led_classdev_unregister()
touchscreen_dmi:
- Update Trekstor Twin 10.1 entry
- Add info for the Trekstor Yourbook C11B
- Drop comma in terminator line
- add Vinga J116 touchscreen
- Add info for the ONDA V891 v5 tablet
- Add touchscreen info for techBite Arc 11.6.
- Add info for the MP-man MPWIN895CL tablet
usb:
- typec: mux: Convert the Intel PMC Mux driver to use new SCU IPC API
watchdog:
- iTCO: fix link error
- intel-mid_wdt: Convert to use new SCU IPC API
wmi:
- Describe function parameters
- Fix indentation in some cases
- Replace UUID redefinitions by their originals
x86/platform/intel-mid:
- Add empty stubs for intel_scu_devices_[create|destroy]()
-----BEGIN PGP SIGNATURE-----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=pprB
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.8-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- Add a support of the media keys on the ASUS laptop UX325JA/UX425JA
- ASUS WMI driver can now handle 2-in-1 models T100TA, T100CHI, T100HA,
T200TA
- Big refactoring of Intel SCU driver with Elkhart Lake support has
been added
- Slim Bootloarder firmware update signaling WMI driver has been added
- Thinkpad ACPI driver can handle dual fan configuration on new P and X
models
- Touchscreen DMI driver has been extended to support
- MP-man MPWIN895CL tablet
- ONDA V891 v5 tablet
- techBite Arc 11.6
- Trekstor Twin 10.1
- Trekstor Yourbook C11B
- Vinga J116
- Virtual Button driver got a few fixes to detect mode of 2-in-1 tablet
models
- Intel Speed Select tools update
- Plenty of small cleanups here and there
* tag 'platform-drivers-x86-v5.8-1' of git://git.infradead.org/linux-platform-drivers-x86: (89 commits)
platform/x86: dcdbas: Check SMBIOS for protected buffer address
platform/x86: asus_wmi: Reserve more space for struct bias_args
platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type
platform/x86: intel-hid: Add a quirk to support HP Spectre X2 (2015)
platform/x86: touchscreen_dmi: Update Trekstor Twin 10.1 entry
platform/x86: touchscreen_dmi: Add info for the Trekstor Yourbook C11B
platform/x86: hp-wmi: Introduce HPWMI_POWER_FW_OR_HW as convenient shortcut
platform/x86: hp-wmi: Convert simple_strtoul() to kstrtou32()
platform/x86: hp-wmi: Refactor postcode_store() to follow standard patterns
platform/x86: acerhdf: replace space by * in modalias
platform/x86: ISST: Increase timeout
tools/power/x86/intel-speed-select: Fix invalid core mask
tools/power/x86/intel-speed-select: Increase CPU count
tools/power/x86/intel-speed-select: Fix json perf-profile output output
platform/x86: dell-wmi: Ignore keyboard attached / detached events
platform/x86: dell-laptop: don't register micmute LED if there is no token
platform/x86: thinkpad_acpi: Replace custom approach by kstrtoint()
platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write()
platform/x86: thinkpad_acpi: Replace next_cmd(&buf) with strsep(&buf, ",")
platform/x86: intel-vbtn: Detect switch position before registering the input-device
...
|
||
|
Linus Torvalds
|
b23c4771ff |
A fair amount of stuff this time around, dominated by yet another massive
set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7 +NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw= =fDC/ -----END PGP SIGNATURE----- Merge tag 'docs-5.8' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "A fair amount of stuff this time around, dominated by yet another massive set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes" * tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits) Documentation: fixes to the maintainer-entry-profile template zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst tracing: Fix events.rst section numbering docs: acpi: fix old http link and improve document format docs: filesystems: add info about efivars content Documentation: LSM: Correct the basic LSM description mailmap: change email for Ricardo Ribalda docs: sysctl/kernel: document unaligned controls Documentation: admin-guide: update bug-hunting.rst docs: sysctl/kernel: document ngroups_max nvdimm: fixes to maintainter-entry-profile Documentation/features: Correct RISC-V kprobes support entry Documentation/features: Refresh the arch support status files Revert "docs: sysctl/kernel: document ngroups_max" docs: move locking-specific documents to locking/ docs: move digsig docs to the security book docs: move the kref doc into the core-api book docs: add IRQ documentation at the core-api book docs: debugging-via-ohci1394.txt: add it to the core-api book docs: fix references for ipmi.rst file ... |
||
|
Linus Torvalds
|
ca1f5df23f |
Printk changes for 5.8
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAl7U1TIACgkQUqAMR0iA lPI0mQ//TcVlRJgts/iwv0M2Simje28t9tziOHgWmEeiyGwE7vwDPDzt8QFiKzBa IrJ5iTRMtCrEF+eapqeH4g+Ve4Npm5Cobl8/h9JEiVu3SNC48TuaiUzU3+Bfl1zV vcDfZtN9QD1/CdLGlyKO75xjkCOaJRCFnx5ToXnd3llshMKI2XebUCnEH4TDe6Fz NGTjJL4kCPwzmae++UhlMfKwkayBtNbqcLkaTb7d67Tw2DcuuIVixUER77oC9QPN SfxdS07s0UVc4C9bCVe3KtYZR5YU/riOjKNJNutzP3JDtQNugywrrtI0qBwEisqM puMJ3xLeLssTn10FJxRK9ewRlXy2zT9mmcCuaVU6LtiyGnHOuEwIU+Ewu0itiJGu JuFovsNqTvOiZqFP7+pkDktOjffF2hsY/a6NxHr6aof8CrdO2w9dmCAgzGvnwV1N /zlmmPSEigVLz47eeivIIdQrPUejrEV7g1wOYYApnIlNCmGjdkGnXKNaUrLGDehQ QIlpx1uvmhntjiw1hTSbOV7KOQxLGtuy6DWLYC7uHD3H3aGDQyQO8dZYXSfOY1Qu cvQ/K8ykW0Kq2JKEHjkwSRHKDpxhvbQg7N5JCHQA49ahdZD3O5bOfeTofw+7nFO0 j9g2Qv6nWFjLbAIAFtqjh6wz0UtGNoTl2cqQswsS10wlDcsq8vs= =pUBG -----END PGP SIGNATURE----- Merge tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Benjamin Herrenschmidt solved a problem with non-matched console aliases by first checking consoles defined on the command line. It is a more conservative approach than the previous attempts. - Benjamin also made sure that the console accessible via /dev/console always has CON_CONSDEV flag. - Andy Shevchenko added the %ptT modifier for printing struct time64_t. It extends the existing %ptR handling for struct rtc_time. - Bruno Meneguele fixed /dev/kmsg error value returned by unsupported SEEK_CUR. - Tetsuo Handa removed unused pr_cont_once(). ... and a few small fixes. * tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: Remove pr_cont_once() printk: handle blank console arguments passed in. kernel/printk: add kmsg SEEK_CUR handling printk: Fix a typo in comment "interator"->"iterator" usb: pulse8-cec: Switch to use %ptT ARM: bcm2835: Switch to use %ptT lib/vsprintf: Print time64_t in human readable format lib/vsprintf: update comment about simple_strto<foo>() functions printk: Correctly set CON_CONSDEV even when preferred console was not registered printk: Fix preferred console selection with multiple matches printk: Move console matching logic into a separate function printk: Convert a use of sprintf to snprintf in console_unlock |
||
|
Sebastian Reichel
|
601c2a543f |
power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED
Some battery fuel gauges know when the battery needs to be recalibrated before providing usable values. This should be reported via the health property. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> |
||
|
Sebastian Reichel
|
feabe49e46 |
power: supply: core: add manufacture date properties
Some smart batteries store their manufacture date, which is useful to identify the battery and/or to know about the cell quality. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> |
||
|
Sebastian Reichel
|
bac705abcf |
power: supply: core: add capacity error margin property
Add a property for reporting the error margin expected by fuel gauge chips. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> |
||
|
Kajol Jain
|
15cd1d35ba |
Documentation/ABI: Add ABI documentation for chips and sockets
Add documentation for the following sysfs files: /sys/devices/hv_24x7/interface/chipspersocket, /sys/devices/hv_24x7/interface/sockets, /sys/devices/hv_24x7/interface/coresperchip Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200525104308.9814-5-kjain@linux.ibm.com |
||
Lee Jones
|
e8a6f4acae | Merge branches 'ib-mfd-x86-usb-watchdog-5.8', 'ib-mfd-power-rtc-5.8', 'ib-mfd-iio-power-5.8' and 'ib-mfd-hwmon-5.8' into ibs-for-mfd-merged | ||
Saravanan Sekar
|
fe27f04e0c |
power: supply: mp2629: Add impedance compensation config
Allows the user to compensate the intrinsic resistance of the battery to accelerate the charging cycle. Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Srinivas Pandruvada
|
7b52b200cf |
ACPI: DPTF: Add battery participant driver
This driver adds support for Dynamic Platform and Thermal Framework battery participant device support. These attributes are presented via sysfs interface under the platform device for the battery participant: $ls /sys/bus/platform/devices/INT3532:00/dptf_battery current_discharge_capbility_ma max_platform_power_mw no_load_voltage_mv high_freq_impedance_mohm max_steady_state_power_mw Refer to the documentation at Documentation/ABI/testing/sysfs-platform-dptf for details. Here the implementation reuses existing dptf-power.c as the motivation and processing is same. It also shares one ACPI method. Here this change is using participant type, "PTYP" method to identify and do different processing. By using participant type, create/delete either "dptf_power" or "dptf_battery" attribute group and send notifications. The particpant type for for the battery participant is 0x0C. ACPI methods description: PMAX (Intel(R) Dynamic Tuning Platform Max Power Supplied by Battery): This object evaluates to the maximum platform power that can be supported by the battery in milli watts. PBSS (Intel(R) Dynamic Tuning Power Battery Steady State): This object returns the max sustained power for battery in milli watts. RBHF (Intel(R) Dynamic Tuning High Frequency Impedance): This object returns high frequency impedance value that can be obtained from battery fuel gauge. VBNL (Intel(R) Dynamic Tuning No-Load Voltage) This object returns battery instantaneous no-load voltage that can be obtained from battery fuel gauge in milli volts CMPP (Intel(R) Dynamic Tuning Current Discharge Capability) This object returns battery discharge current capability obtained from battery fuel gauge milli amps. Notifications: 0x80: PMAX change. Used to notify Intel(R)Dynamic Tuning Battery participant driver when the PMAX has changed by 250mw. 0x83: PBSS change. Used to notify Intel(R) Dynamic Tuning Battery participant driver when the power source has changed. 0x85: RBHF change. Used to notify Intel(R)Dynamic Tuning Battery participant driver when the RBHF has changed over a threshold by 5mOhm. 0x86: Battery Capability change. Used to notify Intel(R)Dynamic Tuning Battery participant driver when the battery capability has changed. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Srinivas Pandruvada
|
668ce99e4e |
ACPI: DPTF: Additional sysfs attributes for power participant driver
Add two additional attributes to the existing power participant driver:
rest_of_platform_power_mw: (RO) Shows the rest of worst case platform
power in mW outside of S0C. This will help in power distribution to SoC
and rest of the system. For example on a test system, this value is 2.5W
with a 15W TDP SoC. Based on the adapter rating (adapter_rating_mw), user
space software can decide on proper power allocation to SoC to improve
short term performance via powercap/RAPL interface.
prochot_confirm: (WO) Confirm EC about a prochot notification.
Also userspace is notified via sysfs_notify(), whenever power source or
rest of the platform power is changed. So user space can use poll()
system call on those attributes.
The ACPI methods used in this patch are as follows:
PROP
This object evaluates to the rest of worst case platform power in mW.
Bits:
23:0 Worst case rest of platform power in mW.
PBOK
PBOK is a method designed to provide a mechanism for OSPM to change power
setting before EC can de-assert a PROCHOT from a device. The EC may
receive several PROCHOTs, so it has a sequence number attached to PSRC
(read via existing attribute "platform_power_source"). Once OSPM takes
action for a PSRC change notification, it can call PBOK method to confirm
with the sequence number.
Bits:
3:0 Power Delivery State Change Sequence number
30 Reserved
31 0 – Not OK to de-assert PROCHOT
1 – OK to de-assert PROCHOT
PSRC (Platform Power Source): Not new in this patch but for
documentation for new bits
This object evaluates to an integer that represents the system power
source as well as the power delivery state change sequence number.
Bits:
3:0 The current power source as an integer for AC, DC, USB, Wireless.
0 = DC, 1 = AC, 2 = USB, 3 = Wireless Charging
7:4 Power Delivery State Change Sequence Number. Default value is 0
Notifications:
0x81: (Power State Change) Used to notify when the power source has
changed.
0x84: (PROP change) Used to notify when the platform rest of power has
changed.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject, minor ABI documentation edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
Shukun Tan
|
988453fb2f |
crypto: hisilicon/qm - change debugfs file name from qm_regs to regs
The debugfs qm_regs file is already in the qm directory, so no qm_ prefix is required. Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Longfang Liu
|
6621e6492f |
crypto: hisilicon/zip - add debugfs for Hisilicon ZIP
Hisilicon ZIP engine driver uses debugfs to provides IO operation debug information Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Hui Tang
|
64a6301ebe |
crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE
Add debugfs to provides IO operation debug information and add BD processing timeout count function Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Kai Ye
|
8213a1a60c |
crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC
Hisilicon SEC engine driver uses debugfs to provides IO operation debug information Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Longfang Liu
|
0a3a396021 |
crypto: hisilicon/qm - add debugfs to the QM state machine
The QM driver uses debugfs to provides the current state of the QM state machine Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Longfang Liu
|
8502652542 |
crypto: hisilicon/qm - add debugfs for QM
Add DebugFS method to get the information of IRQ/Requests/QP .etc of QM for HPRE/ZIP/SEC drivers. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Greg Kroah-Hartman
|
ddc0aef01a |
soundwire updates for v5.8-rc1
This contains sdw_master_device patches and other updates done by Intel folks. Details: - sdw_master_device to represent the master instances. - sysfs properties for sdw_master_device and sdw_slave. - Documentation update for TDM modes. - some code cleanup patches and odd updates. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl7Gjb0ACgkQfBQHDyUj g0eCxQ//VrLecOXKp/UHgUXMxGGfOC/Bcg45zsuRQA18tHC0Ldx1JwRw4V57+5W7 tG980Z0DH94LEmt9Cuj9EvAoFTt5gH27SDvitvgc/S8BEOsD1XzsSIhwoQxdCt4O 6a8cSb+Oopm1efqXr72LTMIoPyQPhFcz61Y9qPmfomzKedTU1t4eZeUUnzsx9Ynz q1OE9/C/OqIhWBC5duBaM83tL6AVXH6lXW1hi53RjlIbSMdr6T/Mo0/9AAnKJv/t 32NvrFmJ8f+8rJsj3uRUKuSB3LxLoOM7yVhQ3NryzKZr3i2XA4Y0LaLd1KG2hzEB BO8zDIBeGkP/8FKFzyvIiBvF8bgxjbaaimEN984RfXbzlFXN49wfQAdgMI3I4Alu RjZl0s2tnJYAFicUdbw55e1JtXOuPAPtpokaugmRM2QbLta3dt00Tng9c0GVj/c6 Tp5plgW/tkRICCmcHC4UVEAfR79SfTuhVP6tMscAaj9R0LwV15hmDQkVwSIjLR3u n9NCWaeHrByRuyLyMvsbpFaGw07OKuRJwy6gKxGDpc3yUsPocX5TX5ap1DSfOt+3 96vUpTM0HI9+Rco1tlSHghJ97HaVkIbUNAQgmgaP1nF5ve4eI+NwTPyW4ax+Y+kW /AmkEvDoLnNcKLvAMRfq05KOxNcmP2gKhb4+XU9d0fMaJYWCgRg= =5MsU -----END PGP SIGNATURE----- Merge tag 'soundwire-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for v5.8-rc1 This contains sdw_master_device patches and other updates done by Intel folks. Details: - sdw_master_device to represent the master instances. - sysfs properties for sdw_master_device and sdw_slave. - Documentation update for TDM modes. - some code cleanup patches and odd updates. * tag 'soundwire-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: intel: use a single module soundwire: fix spelling mistake soundwire: fix trailing line in sysfs_slave.c soundwire: add Slave sysfs support soundwire: master: add sysfs support soundwire: disco: s/ch/channels/ soundwire: master: add runtime pm support soundwire: bus_type: add sdw_master_device support soundwire: bus: add unique bus id soundwire: bus_type: introduce sdw_slave_type and sdw_master_type soundwire: bus: rename sdw_bus_master_add/delete, add arguments soundwire: intel: (cosmetic) remove multiple superfluous "else" statements soundwire: (cosmetic) remove multiple superfluous "else" statements soundwire: qcom: Use IRQF_ONESHOT soundwire: bus: reduce verbosity on enumeration soundwire: debugfs: clarify SDPX license with GPL-2.0-only soundwire: slave: don't init debugfs on device registration error Documentation: SoundWire: clarify TDM mode support soundwire: qcom: fix error handling in probe soundwire: intel: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer |
||
|
Bruno Meneguele
|
8ece3b3eb5 |
kernel/printk: add kmsg SEEK_CUR handling
Userspace libraries, e.g. glibc's dprintf(), perform a SEEK_CUR operation
over any file descriptor requested to make sure the current position isn't
pointing to junk due to previous manipulation of that same fd. And whenever
that fd doesn't have support for such operation, the userspace code expects
-ESPIPE to be returned.
However, when the fd in question references the /dev/kmsg interface, the
current kernel code state returns -EINVAL instead, causing an unexpected
behavior in userspace: in the case of glibc, when -ESPIPE is returned it
gets ignored and the call completes successfully, while returning -EINVAL
forces dprintf to fail without performing any action over that fd:
if (_IO_SEEKOFF (fp, (off64_t)0, _IO_seek_cur, _IOS_INPUT|_IOS_OUTPUT) ==
_IO_pos_BAD && errno != ESPIPE)
return NULL;
With this patch we make sure to return the correct value when SEEK_CUR is
requested over kmsg and also add some kernel doc information to formalize
this behavior.
Link: https://lore.kernel.org/r/20200317103344.574277-1-bmeneg@redhat.com
Cc: linux-kernel@vger.kernel.org
Cc: rostedt@goodmis.org,
Cc: David.Laight@ACULAB.COM
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
||
|
Pierre-Louis Bossart
|
bcac590299 |
soundwire: add Slave sysfs support
Expose MIPI DisCo Slave properties in sysfs. For Slave properties and Data Port 0, the attributes are managed with simple devm_ support. A Slave Device may have more than one Data Port (DPN), and each Data Port can be sink or source. The attributes are created dynamically using pre-canned macros, but still use devm_ with a name attribute group to avoid creating kobjects - as requested by GregKH. In the _show function, we use container_of() to retrieve port number and direction required to extract the information. Audio modes are not supported for now. Depending on the discussions the SoundWire Device Class, we may add it later as is or follow the new specification. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200518203551.2053-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Pierre-Louis Bossart
|
c5778ca49a |
soundwire: master: add sysfs support
Add the master properties as attributes. The description is directly derived from the MIPI DisCo specification. Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200518203551.2053-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
Hanjun Guo
|
a0bd8a2780 |
Documentation: ABI: make current_governer_ro as a candidate for removal
Since both current_governor and current_governor_ro co-exist under /sys/devices/system/cpu/cpuidle/ file, and it's duplicate, make current_governer_ro as a candidate for removal. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Doug Smythies <dsmythies@telus.net> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hanjun Guo
|
7395683a24 |
Documentation: cpuidle: update the document
Update the document after the remove of cpuidle_sysfs_switch. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Oded Gabbay
|
bcaf415204 |
habanalabs: add hwmgr module for gaudi
The hwmgr module is responsible for messages sent to GAUDI F/W that are not common to all habanalabs ASICs. In GAUDI, we provide the user a simplified mode of controlling the ASIC clock frequency. Instead of three different clocks, we present a single clock property that the user can configure via sysfs. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> |
||
|
Oded Gabbay
|
ca62433f53 |
habanalabs: support clock gating enable/disable
In Gaudi there is a feature of clock gating certain engines. Therefore, add this property to the device structure. In addition, due to a limitation of this feature, the driver needs to dynamically enable or disable this feature during run-time. Therefore, add ASIC interface functions to enable/disable this function from the common code. Moreover, this feature must be turned off when the user wishes to debug the ASIC by reading/writing registers and/or memory through the driver's debugfs. Therefore, add an option to enable/disable clock gating via the debugfs interface. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> |
||
|
Jack Wang
|
aa4d16e44f |
block/rnbd: a bit of documentation
README with description of major sysfs entries, sysfs documentation are moved to ABI dir as Bart suggested. Link: https://lore.kernel.org/r/20200511135131.27580-25-danil.kipnis@cloud.ionos.com Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Jack Wang
|
745b6a3d4a |
RDMA/rtrs: a bit of documentation
README with description of major sysfs entries, sysfs documentation has been moved to ABI dir as suggested by Bart. Link: https://lore.kernel.org/r/20200511135131.27580-15-danil.kipnis@cloud.ionos.com Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
Omer Shpigelman
|
76cedc739d |
habanalabs: remove stop-on-error flag from DMA
Stop-on-error mode in DMA is useful as it stops the transaction immediately upon error e.g. page fault. But it may cause the next command submission to fail as is leaves the DMA in unstable state. Therefore we remove the stop-on-error configuration from the DMA. Stop-on-err is still available for debug. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> |
||
Akira Shimahara
|
57c76221d5 |
w1_therm: adding bulk read support to trigger multiple conversion on bus
Adding bulk read support:
Sending a 'trigger' command in the dedicated sysfs entry of bus master
device send a conversion command for all the slaves on the bus. The sysfs
entry is added as soon as at least one device supporting this feature
is detected on the bus.
The behavior of the sysfs reading temperature on the device is as follow:
* If no bulk read pending, trigger a conversion on the device, wait for
the conversion to be done, read the temperature in device RAM
* If a bulk read has been trigger, access directly the device RAM
This behavior is the same on the 2 sysfs entries ('temperature' and
'w1_slave').
Reading the therm_bulk_read sysfs give the status of bulk operations:
* '-1': conversion in progress on at least 1 sensor
* '1': conversion complete but at least one sensor has not been read yet
* '0': no bulk operation. Reading temperature on ecah device will trigger
a conversion
As not all devices support bulk read feature, it has been added in device
family structure.
The attribute is set at master level as soon as a supporting device is
discover. It is removed when the last supported device leave the bus.
The count of supported device is kept with the static counter
bulk_read_device_counter.
A strong pull up is apply on the line if at least one device required it.
The duration of the pull up is the max time required by a device on the
line, which depends on the resolution settings of each device. The strong
pull up could be adjust with the a module parameter.
Updating documentation in Documentation/ABI/testing/sysfs-driver-w1_therm
and Documentation/w1/slaves/w1_therm.rst accordingly.
Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203820.411483-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Akira Shimahara
|
e2c94d6f57 |
w1_therm: adding alarm sysfs entry
Adding device alarms settings by a dedicated sysfs entry alarms (RW): read or write TH and TL in the device RAM. Checking devices in alarm state could be performed using the master search command. As alarms temperature level are store in a 8 bit register on the device and are signed values, a safe cast shall be performed using the min and max temperature that device are able to measure. This is done by int_to_short inline function. A 'write_data' field is added in the device structure, to bind the correct writing function, as some devices may have 2 or 3 bytes RAM. Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly. Signed-off-by: Akira Shimahara <akira215corp@gmail.com> Link: https://lore.kernel.org/r/20200511203801.411253-1-akira215corp@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Akira Shimahara
|
67b392f7b8 |
w1_therm: optimizing temperature read timings
Optimizing temperature reading by reducing waiting conversion time according to device resolution settings, as per device specification. This is device dependent as not all the devices supports resolution setting, so it has been added in device family structures. The process to read the temperature on the device has been adapted in a new function 'convert_t()', which replace the former 'read_therm()', is introduce to deal with this timing. Strong pull up is also applied during the required time, according to device power status needs and 'strong_pullup' module parameter. 'temperature_from_RAM()' function is introduced to get the correct temperature computation (device dependent) from device RAM data. An new sysfs entry has been added to ouptut only temperature. The old entry w1_slave has been kept for compatibility, without changing its output format. Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly. Signed-off-by: Akira Shimahara <akira215corp@gmail.com> Link: https://lore.kernel.org/r/20200511203742.411039-1-akira215corp@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Akira Shimahara
|
45d457a4cf |
w1_therm: adding eeprom sysfs entry
The driver implement 2 hardware functions to access device RAM: * copy_scratchpad * recall_scratchpad They act according to device specifications. As EEPROM operations are not device dependent (all w1_therm can perform EEPROM read/write operation following the same protocol), it is removed from device families structures. Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly. Signed-off-by: Akira Shimahara <akira215corp@gmail.com> Link: https://lore.kernel.org/r/20200511203725.410844-1-akira215corp@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Akira Shimahara
|
308bdb94de |
w1_therm: adding resolution sysfs entry
Adding resolution sysfs entry (RW) to get or set the device resolution Write values are managed as follow: * '9..12': resolution to set in bit * Anything else: do nothing Read values are : * '9..12': device resolution in bit * '-xx': xx is kernel error when reading the resolution Only supported devices will show the sysfs entry. A new family has been created for DS18S20 devices as they do not implement resolution feature. The resolution of each device is check when the device is discover by the bus master, in 'w1_therm_add_slave(struct w1_slave *)'. The status is stored in the device structure w1_therm_family_data so that the driver always knows the resolution of each device, which could be used later to determine the required conversion duration (resolution dependent). The resolution is re evaluate each time a user read or write the sysfs entry. To avoid looping through the w1_therm_families at run time, the pointer 'specific_functions' is set up to the correct 'w1_therm_family_converter' when the slave is added (which mean when it is discovered by the master). This initialization is done by a helper function 'device_family(struct w1_slave *sl)', and a dedicated macro 'SLAVE_SPECIFIC_FUNC(sl)' allow the access to the specific function of the slave device. 'read_scratchpad' and 'write_scratchpad' are the hardware functions to access the device RAM, as per protocol specification. It cancel the former 'precision' functions, which was only set and never read (so not stored in the device struct). Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly. Signed-off-by: Akira Shimahara <akira215corp@gmail.com> Link: https://lore.kernel.org/r/20200511203708.410649-1-akira215corp@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Akira Shimahara
|
b7bb6ca17a |
w1_therm: adding ext_power sysfs entry
Adding ext_power sysfs entry (RO). Return the power status of the device: - 0: device parasite powered - 1: device externally powered - xx: xx is kernel error The power status of each device is check when the device is discover by the bus master, in 'w1_therm_add_slave(struct w1_slave *)'. The status is stored in the device structure w1_therm_family_data so that the driver always knows the power state of each device, which could be used later to determine the required strong pull up to apply on the line. The power status is re evaluate each time the sysfs ext_power read by a user. The hardware function 'read_powermode(struct w1_slave *sl)' act just as per device specifications, sending W1_READ_PSUPPLY command on the bus, and issue a read time slot, reading only one bit. A helper function 'bool bus_mutex_lock(struct mutex *lock)' is introduced. It try to aquire the bus mutex several times (W1_THERM_MAX_TRY), waiting W1_THERM_RETRY_DELAY between two attempt. Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly. Signed-off-by: Akira Shimahara <akira215corp@gmail.com> Link: https://lore.kernel.org/r/20200511203650.410439-1-akira215corp@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Akira Shimahara
|
daa3cfeb19 |
w1_therm: adding sysfs-driver-w1_therm doc
Adding a sysfs-driver-w1_therm documentation file in Documentation/ABI/testing. It describe the onlys sysfs entry of w1_therm module, based on Documentation/w1/slaves/w1_therm.rst Signed-off-by: Akira Shimahara <akira215corp@gmail.com> Link: https://lore.kernel.org/r/20200511203631.410227-1-akira215corp@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Christian Gromm
|
b50220c136 |
Documentation: ABI: correct sysfs attribute description of MOST driver
This patch fixes the ABI description file sysfs-bus-most. Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Link: https://lore.kernel.org/r/1589534465-7423-8-git-send-email-christian.gromm@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Jithu Joseph
|
2d30fcdd43 |
platform/x86: Add Slim Bootloader firmware update signaling driver
Slim Bootloader(SBL) is a small open-source boot firmware, designed for running on certain Intel platforms. SBL can be thought-of as fulfilling the role of a minimal BIOS implementation, i.e initializing the hardware and booting Operating System. Since SBL is not UEFI compliant, firmware update cannot be triggered using standard UEFI runtime services. Further considering performance impact, SBL doesn't look for a firmware update image on every reset and does so only when firmware update signal is asserted. SBL exposes an ACPI-WMI device which comes up in sysfs as /sys/bus/wmi/44FADEB1xxx and this driver adds a "firmware_update_request" device attribute. This attribute normally has a value of 0 and userspace can signal SBL to update firmware, on next reboot, by writing a value of 1 like: echo 1 > /sys/bus/wmi/devices/44FADEB1xxx/firmware_update_request This driver only implements a signaling mechanism, the actual firmware update process and various details like firmware update image format, firmware image location etc are defined by SBL and are not in the scope of this driver. DocLink: https://slimbootloader.github.io/security/firmware-update.html Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
Gautham R. Shenoy
|
bde752c3d6 |
Documentation: Document sysfs interfaces purr, spurr, idle_purr, idle_spurr
Add documentation for the following sysfs interfaces: /sys/devices/system/cpu/cpuX/purr /sys/devices/system/cpu/cpuX/spurr /sys/devices/system/cpu/cpuX/idle_purr /sys/devices/system/cpu/cpuX/idle_spurr Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1586249263-14048-6-git-send-email-ego@linux.vnet.ibm.com |
||
Wu Hao
|
724142f8c4 |
fpga: dfl: fme: add performance reporting support
This patch adds support for performance reporting private feature
for FPGA Management Engine (FME). Now it supports several different
performance counters, including 'basic', 'cache', 'fabric', 'vtd'
and 'vtd_sip'. It allows user to use standard linux tools to access
these performance counters.
e.g. List all events by "perf list"
perf list | grep fme
dfl_fme0/cache_read_hit/ [Kernel PMU event]
dfl_fme0/cache_read_miss/ [Kernel PMU event]
...
dfl_fme0/fab_mmio_read/ [Kernel PMU event]
dfl_fme0/fab_mmio_write/ [Kernel PMU event]
...
dfl_fme0/fab_port_mmio_read,portid=?/ [Kernel PMU event]
dfl_fme0/fab_port_mmio_write,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_port_devtlb_1g_fill,portid=?/ [Kernel PMU event]
dfl_fme0/vtd_port_devtlb_2m_fill,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_sip_iotlb_1g_hit/ [Kernel PMU event]
dfl_fme0/vtd_sip_iotlb_1g_miss/ [Kernel PMU event]
...
dfl_fme0/clock [Kernel PMU event]
...
e.g. check increased counter value after run one application using
"perf stat" command.
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_mmio_write/ ./test
Performance counter stats for './test':
1 dfl_fme0/fab_mmio_read/
2 dfl_fme0/fab_mmio_write/
1.009496520 seconds time elapsed
Please note that fabric counters support both fab_* and fab_port_*, but
actually they are sharing one set of performance counters in hardware.
If user wants to monitor overall data events on fab_* then fab_port_*
can't be supported at the same time, see example below:
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,portid=0/
Performance counter stats for 'system wide':
0 dfl_fme0/fab_mmio_read/
<not supported> dfl_fme0/fab_port_mmio_write,portid=0/
2.141064085 seconds time elapsed
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Link: https://lore.kernel.org/r/1587949583-12058-3-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
Rajan Vaja
|
a2cc220a9a |
firmware: xilinx: Add sysfs and API to set boot health status
Add sysfs interface to set boot health status from user space. Add API used by this interface to communicate with firmware. If PMUFW is compiled with CHECK_HEALTHY_BOOT, it will check the healthy bit on FPD WDT expiration. If healthy bit is set by a user application running in Linux, PMUFW will do APU only restart. If healthy bit is not set during FPD WDT expiration, PMUFW will do system restart. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-26-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Rajan Vaja
|
b3ae24c448 |
firmware: xilinx: Add sysfs to set shutdown scope
The Linux shutdown functionality implemented via PSCI system_off does not include an option to set a scope, i.e. which parts of the system to shut down. This patch creates sysfs that allows to set the shutdown scope for the next shutdown request. When the next shutdown is performed, the platform specific portion of PSCI-system_off can use the chosen shutdown scope. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-25-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Rajan Vaja
|
ae5c961da6 |
firmware: xilinx: Add sysfs interface
Add firmware-ggs sysfs interface which provides read/write interface to global storage registers. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-23-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mika Westerberg
|
25f1ca31e2 |
platform/x86: intel_pmc_ipc: Convert to MFD
This driver only creates a bunch of platform devices sharing resources belonging to the PMC device. This is pretty much what MFD subsystem is for so move the driver there, renaming it to intel_pmc_bxt.c which should be more clear what it is. MFD subsystem provides nice helper APIs for subdevice creation so convert the driver to use those. Unfortunately the ACPI device includes separate resources for most of the subdevices so we cannot simply call mfd_add_devices() to create all of them but instead we need to call it separately for each device. The new MFD driver continues to expose two sysfs attributes that allow userspace to send IPC commands to the PMC/SCU to avoid breaking any existing applications that may use these. Generally this is bad idea so document this in the ABI documentation. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Greg Kroah-Hartman
|
4e1d96306d |
First set of new IIO device support, features and cleanup for the 5.8 cycle
Usual mix of new drivers, new support in old drivers and lots of minor
cleanup. Yaml conversions also continue to trickle in (plenty more to go!)
New device support
* ad7476
- Add ad7091 support (ID only)
* ad9467
- New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
* adi-axi-adc
- New driver to support ADIs generic AXI ADC IP core, used to provide
high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
paired with a device using a slow configuration interface (spi etc)
Includes DT bindings and some fixes for fpga headers.
* bmg160
- Add support for BMI088 (ID only)
* max1241
- New driver for this ADC.
* st_sensors
- Add support for LIS2HH12 accelerometer
* sx9310
- New driver supporting sx9310 and sx9311 proximity sensors.
Yaml DT binding conversions
* rockchip-saradc (including adding some missing parts)
* stm32-dac
* tsl2563
* vcnl4000
Features
* st_lsm6dsx
- Add LIS3MDL as a possible sensor hub device.
* vcnl4000
- Add new concept of near level (from DT) to provide to userspace which
often needs to have some calibrated concept of 'near'.
Cleanups, minor fixes etc.
* core
- Use snprintf for functions where strings are built and there is
potential for overflow.
- Correct docs to indicate mlock should not be used directly by drivers.
- Fix up accidental dropping of a patch to use bitmap_zalloc.
- Stop allowing enabling of buffers with no channels enabled.
- Drop unused 'stufftoread' from iio_buffer.
- Drop scan_el_attrs form iio_buffer as unused.
- Reorder sanity checks in __iio_device_register to fail earlier.
- Drop all the devm_ runregister / free functions from IIO as they
were never used and encourage poor design.
* dma-buffer
- Tidy up includes.
* dma-engine-buffer
- Provide dev-managed allocator.
- Fix an issue with printing a size_t
* cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
- Replace some unnecessary casts of error ptrs and whilst there.
use the %pe printf parameter to print them in a more useful fashion.
* cross subsystem
- Drop casts in calls to regmap_bulk_read as they make no sense.
- Use devm_platform_ioremap_resource to reduce boilerplate.
- Fix typos in Analog Devices.
* counters/104-quad
- Add Syed Nayyar Waris as an additional maintainer.
* ad7476
- Generate CONVST signal internally rather than requiring external
trigger. Add sysfs read back as can now do so.
- use devm_add_action_or_reset to tidy up error and remove handling.
* ad7793
- Switch to read_avail from explicit attribute. Mostly done to avoid
confusing people with a - sign (without surounding spaces) that
was correct but checkpatch didn't like.
* adis library
- Add missing newlines at end of error messages.
* adis16400
- Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* adis16460
- Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* ad_sigma_delta
- Move some channel definitions into individual drivers to avoid
having to deal with complex options.
* ak8974
- Silence an error on deffered probe.
* bmp280
- Harden against IRQ before registration.
- Convert to read_avail instead of opencoding the equivalent.
- Explicitly mark GPIO as optional.
- Cleanup casts.
- Remove line breaks from strings.
* htts221
- Replace direct access to platform_data with dev_get_platdata().
- Use device properties rather than device tree ones to allow ACPI
probing.
- Casting cleanups.
* intel_mrfld_adc
- Don't use unaligned accessor for aligned data.
* isl29125
- Reorder buer pre and post hooks to allow for coming core rework.
* ltc2983
- Remove comp to bool.
* max1363
- Stop using mlock from the iio_dev directly in favour of a local lock
with clearly defined scope.
* max30100
- Use generic device properties to allow ACPI probe.
* mpu6050
- Convert to i2c_new_client_device.
- Add debugfs register access.
* st_lsm6dsx
- Provide means of configuring full scale on slave device if supported.
- Drop include of st_sensors header to get one value. Its not otherwise
used by this driver.
* st-sensors
- Replace direct access to platform_data with dev_get_platdata().
- Casting cleanups.
- Avoid splitting strings.
* st_uvis25
- Casting cleanups.
* tsl2563
- Typo fix.
* tsl2772
- scnprintf in a non obvious string building usecase. Note also 'fixes'
a wrong calculation of remaining space that couldn't actually cause
any trouble as there was lots of room.
* xilinx-xadc
- Fix Lars-Peter spelling his own name wrong :) + additional typos.
-----BEGIN PGP SIGNATURE-----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=DyTF
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new IIO device support, features and cleanup for the 5.8 cycle
Usual mix of new drivers, new support in old drivers and lots of minor
cleanup. Yaml conversions also continue to trickle in (plenty more to go!)
New device support
* ad7476
- Add ad7091 support (ID only)
* ad9467
- New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
* adi-axi-adc
- New driver to support ADIs generic AXI ADC IP core, used to provide
high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
paired with a device using a slow configuration interface (spi etc)
Includes DT bindings and some fixes for fpga headers.
* bmg160
- Add support for BMI088 (ID only)
* max1241
- New driver for this ADC.
* st_sensors
- Add support for LIS2HH12 accelerometer
* sx9310
- New driver supporting sx9310 and sx9311 proximity sensors.
Yaml DT binding conversions
* rockchip-saradc (including adding some missing parts)
* stm32-dac
* tsl2563
* vcnl4000
Features
* st_lsm6dsx
- Add LIS3MDL as a possible sensor hub device.
* vcnl4000
- Add new concept of near level (from DT) to provide to userspace which
often needs to have some calibrated concept of 'near'.
Cleanups, minor fixes etc.
* core
- Use snprintf for functions where strings are built and there is
potential for overflow.
- Correct docs to indicate mlock should not be used directly by drivers.
- Fix up accidental dropping of a patch to use bitmap_zalloc.
- Stop allowing enabling of buffers with no channels enabled.
- Drop unused 'stufftoread' from iio_buffer.
- Drop scan_el_attrs form iio_buffer as unused.
- Reorder sanity checks in __iio_device_register to fail earlier.
- Drop all the devm_ runregister / free functions from IIO as they
were never used and encourage poor design.
* dma-buffer
- Tidy up includes.
* dma-engine-buffer
- Provide dev-managed allocator.
- Fix an issue with printing a size_t
* cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
- Replace some unnecessary casts of error ptrs and whilst there.
use the %pe printf parameter to print them in a more useful fashion.
* cross subsystem
- Drop casts in calls to regmap_bulk_read as they make no sense.
- Use devm_platform_ioremap_resource to reduce boilerplate.
- Fix typos in Analog Devices.
* counters/104-quad
- Add Syed Nayyar Waris as an additional maintainer.
* ad7476
- Generate CONVST signal internally rather than requiring external
trigger. Add sysfs read back as can now do so.
- use devm_add_action_or_reset to tidy up error and remove handling.
* ad7793
- Switch to read_avail from explicit attribute. Mostly done to avoid
confusing people with a - sign (without surounding spaces) that
was correct but checkpatch didn't like.
* adis library
- Add missing newlines at end of error messages.
* adis16400
- Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* adis16460
- Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* ad_sigma_delta
- Move some channel definitions into individual drivers to avoid
having to deal with complex options.
* ak8974
- Silence an error on deffered probe.
* bmp280
- Harden against IRQ before registration.
- Convert to read_avail instead of opencoding the equivalent.
- Explicitly mark GPIO as optional.
- Cleanup casts.
- Remove line breaks from strings.
* htts221
- Replace direct access to platform_data with dev_get_platdata().
- Use device properties rather than device tree ones to allow ACPI
probing.
- Casting cleanups.
* intel_mrfld_adc
- Don't use unaligned accessor for aligned data.
* isl29125
- Reorder buer pre and post hooks to allow for coming core rework.
* ltc2983
- Remove comp to bool.
* max1363
- Stop using mlock from the iio_dev directly in favour of a local lock
with clearly defined scope.
* max30100
- Use generic device properties to allow ACPI probe.
* mpu6050
- Convert to i2c_new_client_device.
- Add debugfs register access.
* st_lsm6dsx
- Provide means of configuring full scale on slave device if supported.
- Drop include of st_sensors header to get one value. Its not otherwise
used by this driver.
* st-sensors
- Replace direct access to platform_data with dev_get_platdata().
- Casting cleanups.
- Avoid splitting strings.
* st_uvis25
- Casting cleanups.
* tsl2563
- Typo fix.
* tsl2772
- scnprintf in a non obvious string building usecase. Note also 'fixes'
a wrong calculation of remaining space that couldn't actually cause
any trouble as there was lots of room.
* xilinx-xadc
- Fix Lars-Peter spelling his own name wrong :) + additional typos.
* tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits)
iio: magnetometer: ak8974: Silence deferred-probe error
Documentation: ABI: document IIO in_proximity_nearlevel file
iio: vcnl4000: Export near level property for proximity sensor
dt-bindings: iio: light: vcnl4000: Add proximity-near-level
dt-bindings: iio: Introduce common properties for iio sensors
dt-bindings: iio: vcnl4000: convert bindings to YAML format
iio: Fix misspellings of "Analog Devices"
iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions
iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource
iio: adc: at91-adc: Use devm_platform_ioremap_resource
iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource
iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read
iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk*
iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions.
iio:chemical:bme680: Tidy up parameters to regmap_bulk_read
iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls
iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls
iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver
iio: buffer: drop devm_iio_kfifo_free() API call
iio: buffer: drop devm_iio_hw_consumer_free() API call
...
|
||
|
Mauro Carvalho Chehab
|
0c1bc6b845 |
docs: filesystems: fix renamed references
Some filesystem references got broken by a previous patch series I submitted. Address those. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: David Sterba <dsterba@suse.com> # fs/affs/Kconfig Link: https://lore.kernel.org/r/57318c53008dbda7f6f4a5a9e5787f4d37e8565a.1586881715.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
Andrew Lunn
|
db30a57779 |
net: Add testing sysfs attribute
Similar to speed, duplex and dorment, report the testing status in sysfs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Mark Gross
|
7e5b3c267d |
x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation
SRBDS is an MDS-like speculative side channel that can leak bits from the random number generator (RNG) across cores and threads. New microcode serializes the processor access during the execution of RDRAND and RDSEED. This ensures that the shared buffer is overwritten before it is released for reuse. While it is present on all affected CPU models, the microcode mitigation is not needed on models that enumerate ARCH_CAPABILITIES[MDS_NO] in the cases where TSX is not supported or has been disabled with TSX_CTRL. The mitigation is activated by default on affected processors and it increases latency for RDRAND and RDSEED instructions. Among other effects this will reduce throughput from /dev/urandom. * Enable administrator to configure the mitigation off when desired using either mitigations=off or srbds=off. * Export vulnerability status via sysfs * Rename file-scoped macros to apply for non-whitelist table initializations. [ bp: Massage, - s/VULNBL_INTEL_STEPPING/VULNBL_INTEL_STEPPINGS/g, - do not read arch cap MSR a second time in tsx_fused_off() - just pass it in, - flip check in cpu_set_bug_bits() to save an indentation level, - reflow comments. jpoimboe: s/Mitigated/Mitigation/ in user-visible strings tglx: Dropped the fused off magic for now ] Signed-off-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Neelima Krishnan <neelima.krishnan@intel.com> |
||
Guido Günther
|
aa8cb04855 |
Documentation: ABI: document IIO in_proximity_nearlevel file
The vcnl4000 IIO driver introduced a new attribute "in_proximity_nearlevel". This adds it to the list of documented ABI for sysfs-bus-iio. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Daeho Jeong
|
2bc4bea338 |
f2fs: add tracepoint for f2fs iostat
Added a tracepoint to see iostat of f2fs. Default period of that is 3 second. This tracepoint can be used to be monitoring I/O statistics periodically. Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |