mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-28 22:54:05 +08:00
6416954ca7
998446 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Filipe Manana
|
6416954ca7 |
btrfs: release path before starting transaction when cloning inline extent
When cloning an inline extent there are a few cases, such as when we have an implicit hole at file offset 0, where we start a transaction while holding a read lock on a leaf. Starting the transaction results in a call to sb_start_intwrite(), which results in doing a read lock on a percpu semaphore. Lockdep doesn't like this and complains about it: [46.580704] ====================================================== [46.580752] WARNING: possible circular locking dependency detected [46.580799] 5.13.0-rc1 #28 Not tainted [46.580832] ------------------------------------------------------ [46.580877] cloner/3835 is trying to acquire lock: [46.580918] c00000001301d638 (sb_internal#2){.+.+}-{0:0}, at: clone_copy_inline_extent+0xe4/0x5a0 [46.581167] [46.581167] but task is already holding lock: [46.581217] c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0 [46.581293] [46.581293] which lock already depends on the new lock. [46.581293] [46.581351] [46.581351] the existing dependency chain (in reverse order) is: [46.581410] [46.581410] -> #1 (btrfs-tree-00){++++}-{3:3}: [46.581464] down_read_nested+0x68/0x200 [46.581536] __btrfs_tree_read_lock+0x70/0x1d0 [46.581577] btrfs_read_lock_root_node+0x88/0x200 [46.581623] btrfs_search_slot+0x298/0xb70 [46.581665] btrfs_set_inode_index+0xfc/0x260 [46.581708] btrfs_new_inode+0x26c/0x950 [46.581749] btrfs_create+0xf4/0x2b0 [46.581782] lookup_open.isra.57+0x55c/0x6a0 [46.581855] path_openat+0x418/0xd20 [46.581888] do_filp_open+0x9c/0x130 [46.581920] do_sys_openat2+0x2ec/0x430 [46.581961] do_sys_open+0x90/0xc0 [46.581993] system_call_exception+0x3d4/0x410 [46.582037] system_call_common+0xec/0x278 [46.582078] [46.582078] -> #0 (sb_internal#2){.+.+}-{0:0}: [46.582135] __lock_acquire+0x1e90/0x2c50 [46.582176] lock_acquire+0x2b4/0x5b0 [46.582263] start_transaction+0x3cc/0x950 [46.582308] clone_copy_inline_extent+0xe4/0x5a0 [46.582353] btrfs_clone+0x5fc/0x880 [46.582388] btrfs_clone_files+0xd8/0x1c0 [46.582434] btrfs_remap_file_range+0x3d8/0x590 [46.582481] do_clone_file_range+0x10c/0x270 [46.582558] vfs_clone_file_range+0x1b0/0x310 [46.582605] ioctl_file_clone+0x90/0x130 [46.582651] do_vfs_ioctl+0x874/0x1ac0 [46.582697] sys_ioctl+0x6c/0x120 [46.582733] system_call_exception+0x3d4/0x410 [46.582777] system_call_common+0xec/0x278 [46.582822] [46.582822] other info that might help us debug this: [46.582822] [46.582888] Possible unsafe locking scenario: [46.582888] [46.582942] CPU0 CPU1 [46.582984] ---- ---- [46.583028] lock(btrfs-tree-00); [46.583062] lock(sb_internal#2); [46.583119] lock(btrfs-tree-00); [46.583174] lock(sb_internal#2); [46.583212] [46.583212] *** DEADLOCK *** [46.583212] [46.583266] 6 locks held by cloner/3835: [46.583299] #0: c00000001301d448 (sb_writers#12){.+.+}-{0:0}, at: ioctl_file_clone+0x90/0x130 [46.583382] #1: c00000000f6d3768 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}, at: lock_two_nondirectories+0x58/0xc0 [46.583477] #2: c00000000f6d72a8 (&sb->s_type->i_mutex_key#15/4){+.+.}-{3:3}, at: lock_two_nondirectories+0x9c/0xc0 [46.583574] #3: c00000000f6d7138 (&ei->i_mmap_lock){+.+.}-{3:3}, at: btrfs_remap_file_range+0xd0/0x590 [46.583657] #4: c00000000f6d35f8 (&ei->i_mmap_lock/1){+.+.}-{3:3}, at: btrfs_remap_file_range+0xe0/0x590 [46.583743] #5: c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0 [46.583828] [46.583828] stack backtrace: [46.583872] CPU: 1 PID: 3835 Comm: cloner Not tainted 5.13.0-rc1 #28 [46.583931] Call Trace: [46.583955] [c0000000167c7200] [c000000000c1ee78] dump_stack+0xec/0x144 (unreliable) [46.584052] [c0000000167c7240] [c000000000274058] print_circular_bug.isra.32+0x3a8/0x400 [46.584123] [c0000000167c72e0] [c0000000002741f4] check_noncircular+0x144/0x190 [46.584191] [c0000000167c73b0] [c000000000278fc0] __lock_acquire+0x1e90/0x2c50 [46.584259] [c0000000167c74f0] [c00000000027aa94] lock_acquire+0x2b4/0x5b0 [46.584317] [c0000000167c75e0] [c000000000a0d6cc] start_transaction+0x3cc/0x950 [46.584388] [c0000000167c7690] [c000000000af47a4] clone_copy_inline_extent+0xe4/0x5a0 [46.584457] [c0000000167c77c0] [c000000000af525c] btrfs_clone+0x5fc/0x880 [46.584514] [c0000000167c7990] [c000000000af5698] btrfs_clone_files+0xd8/0x1c0 [46.584583] [c0000000167c7a00] [c000000000af5b58] btrfs_remap_file_range+0x3d8/0x590 [46.584652] [c0000000167c7ae0] [c0000000005d81dc] do_clone_file_range+0x10c/0x270 [46.584722] [c0000000167c7b40] [c0000000005d84f0] vfs_clone_file_range+0x1b0/0x310 [46.584793] [c0000000167c7bb0] [c00000000058bf80] ioctl_file_clone+0x90/0x130 [46.584861] [c0000000167c7c10] [c00000000058c894] do_vfs_ioctl+0x874/0x1ac0 [46.584922] [c0000000167c7d10] [c00000000058db4c] sys_ioctl+0x6c/0x120 [46.584978] [c0000000167c7d60] [c0000000000364a4] system_call_exception+0x3d4/0x410 [46.585046] [c0000000167c7e10] [c00000000000d45c] system_call_common+0xec/0x278 [46.585114] --- interrupt: c00 at 0x7ffff7e22990 [46.585160] NIP: 00007ffff7e22990 LR: 00000001000010ec CTR: 0000000000000000 [46.585224] REGS: c0000000167c7e80 TRAP: 0c00 Not tainted (5.13.0-rc1) [46.585280] MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 28000244 XER: 00000000 [46.585374] IRQMASK: 0 [46.585374] GPR00: 0000000000000036 00007fffffffdec0 00007ffff7f17100 0000000000000004 [46.585374] GPR04: 000000008020940d 00007fffffffdf40 0000000000000000 0000000000000000 [46.585374] GPR08: 0000000000000004 0000000000000000 0000000000000000 0000000000000000 [46.585374] GPR12: 0000000000000000 00007ffff7ffa940 0000000000000000 0000000000000000 [46.585374] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [46.585374] GPR20: 0000000000000000 000000009123683e 00007fffffffdf40 0000000000000000 [46.585374] GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000004 [46.585374] GPR28: 0000000100030260 0000000100030280 0000000000000003 000000000000005f [46.585919] NIP [00007ffff7e22990] 0x7ffff7e22990 [46.585964] LR [00000001000010ec] 0x1000010ec [46.586010] --- interrupt: c00 This should be a false positive, as both locks are acquired in read mode. Nevertheless, we don't need to hold a leaf locked when we start the transaction, so just release the leaf (path) before starting it. Reported-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/linux-btrfs/20210513214404.xks77p566fglzgum@riteshh-domain/ Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
54a40fc3a1 |
btrfs: fix removed dentries still existing after log is synced
When we move one inode from one directory to another and both the inode
and its previous parent directory were logged before, we are not supposed
to have the dentry for the old parent if we have a power failure after the
log is synced. Only the new dentry is supposed to exist.
Generally this works correctly, however there is a scenario where this is
not currently working, because the old parent of the file/directory that
was moved is not authoritative for a range that includes the dir index and
dir item keys of the old dentry. This case is better explained with the
following example and reproducer:
# The test requires a very specific layout of keys and items in the
# fs/subvolume btree to trigger the bug. So we want to make sure that
# on whatever platform we are, we have the same leaf/node size.
#
# Currently in btrfs the node/leaf size can not be smaller than the page
# size (but it can be greater than the page size). So use the largest
# supported node/leaf size (64K).
$ mkfs.btrfs -f -n 65536 /dev/sdc
$ mount /dev/sdc /mnt
# "testdir" is inode 257.
$ mkdir /mnt/testdir
$ chmod 755 /mnt/testdir
# Create several empty files to have the directory "testdir" with its
# items spread over several leaves (7 in this case).
$ for ((i = 1; i <= 1200; i++)); do
echo -n > /mnt/testdir/file$i
done
# Create our test directory "dira", inode number 1458, which gets all
# its items in leaf 7.
#
# The BTRFS_DIR_ITEM_KEY item for inode 257 ("testdir") that points to
# the entry named "dira" is in leaf 2, while the BTRFS_DIR_INDEX_KEY
# item that points to that entry is in leaf 3.
#
# For this particular filesystem node size (64K), file count and file
# names, we endup with the directory entry items from inode 257 in
# leaves 2 and 3, as previously mentioned - what matters for triggering
# the bug exercised by this test case is that those items are not placed
# in leaf 1, they must be placed in a leaf different from the one
# containing the inode item for inode 257.
#
# The corresponding BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items for
# the parent inode (257) are the following:
#
# item 460 key (257 DIR_ITEM 3724298081) itemoff 48344 itemsize 34
# location key (1458 INODE_ITEM 0) type DIR
# transid 6 data_len 0 name_len 4
# name: dira
#
# and:
#
# item 771 key (257 DIR_INDEX 1202) itemoff 36673 itemsize 34
# location key (1458 INODE_ITEM 0) type DIR
# transid 6 data_len 0 name_len 4
# name: dira
$ mkdir /mnt/testdir/dira
# Make sure everything done so far is durably persisted.
$ sync
# Now do a change to inode 257 ("testdir") that does not result in
# COWing leaves 2 and 3 - the leaves that contain the directory items
# pointing to inode 1458 (directory "dira").
#
# Changing permissions, the owner/group, updating or adding a xattr,
# etc, will not change (COW) leaves 2 and 3. So for the sake of
# simplicity change the permissions of inode 257, which results in
# updating its inode item and therefore change (COW) only leaf 1.
$ chmod 700 /mnt/testdir
# Now fsync directory inode 257.
#
# Since only the first leaf was changed/COWed, we log the inode item of
# inode 257 and only the dentries found in the first leaf, all have a
# key type of BTRFS_DIR_ITEM_KEY, and no keys of type
# BTRFS_DIR_INDEX_KEY, because they sort after the former type and none
# exist in the first leaf.
#
# We also log 3 items that represent ranges for dir items and dir
# indexes for which the log is authoritative:
#
# 1) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is
# authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset
# in the range [0, 2285968570] (the offset here is the crc32c of the
# dentry's name). The value 2285968570 corresponds to the offset of
# the first key of leaf 2 (which is of type BTRFS_DIR_ITEM_KEY);
#
# 2) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is
# authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset
# in the range [4293818216, (u64)-1] (the offset here is the crc32c
# of the dentry's name). The value 4293818216 corresponds to the
# offset of the highest key of type BTRFS_DIR_ITEM_KEY plus 1
# (4293818215 + 1), which is located in leaf 2;
#
# 3) a key of type BTRFS_DIR_LOG_INDEX_KEY, with an offset of 1203,
# which indicates the log is authoritative for all keys of type
# BTRFS_DIR_INDEX_KEY that have an offset in the range
# [1203, (u64)-1]. The value 1203 corresponds to the offset of the
# last key of type BTRFS_DIR_INDEX_KEY plus 1 (1202 + 1), which is
# located in leaf 3;
#
# Also, because "testdir" is a directory and inode 1458 ("dira") is a
# child directory, we log inode 1458 too.
$ xfs_io -c "fsync" /mnt/testdir
# Now move "dira", inode 1458, to be a child of the root directory
# (inode 256).
#
# Because this inode was previously logged, when "testdir" was fsynced,
# the log is updated so that the old inode reference, referring to inode
# 257 as the parent, is deleted and the new inode reference, referring
# to inode 256 as the parent, is added to the log.
$ mv /mnt/testdir/dira /mnt
# Now change some file and fsync it. This guarantees the log changes
# made by the previous move/rename operation are persisted. We do not
# need to do any special modification to the file, just any change to
# any file and sync the log.
$ xfs_io -c "pwrite -S 0xab 0 64K" -c "fsync" /mnt/testdir/file1
# Simulate a power failure and then mount again the filesystem to
# replay the log tree. We want to verify that we are able to mount the
# filesystem, meaning log replay was successful, and that directory
# inode 1458 ("dira") only has inode 256 (the filesystem's root) as
# its parent (and no longer a child of inode 257).
#
# It used to happen that during log replay we would end up having
# inode 1458 (directory "dira") with 2 hard links, being a child of
# inode 257 ("testdir") and inode 256 (the filesystem's root). This
# resulted in the tree checker detecting the issue and causing the
# mount operation to fail (with -EIO).
#
# This happened because in the log we have the new name/parent for
# inode 1458, which results in adding the new dentry with inode 256
# as the parent, but the previous dentry, under inode 257 was never
# removed - this is because the ranges for dir items and dir indexes
# of inode 257 for which the log is authoritative do not include the
# old dir item and dir index for the dentry of inode 257 referring to
# inode 1458:
#
# - for dir items, the log is authoritative for the ranges
# [0, 2285968570] and [4293818216, (u64)-1]. The dir item at inode 257
# pointing to inode 1458 has a key of (257 DIR_ITEM 3724298081), as
# previously mentioned, so the dir item is not deleted when the log
# replay procedure processes the authoritative ranges, as 3724298081
# is outside both ranges;
#
# - for dir indexes, the log is authoritative for the range
# [1203, (u64)-1], and the dir index item of inode 257 pointing to
# inode 1458 has a key of (257 DIR_INDEX 1202), as previously
# mentioned, so the dir index item is not deleted when the log
# replay procedure processes the authoritative range.
<power failure>
$ mount /dev/sdc /mnt
mount: /mnt: can't read superblock on /dev/sdc.
$ dmesg
(...)
[87849.840509] BTRFS info (device sdc): start tree-log replay
[87849.875719] BTRFS critical (device sdc): corrupt leaf: root=5 block=30539776 slot=554 ino=1458, invalid nlink: has 2 expect no more than 1 for dir
[87849.878084] BTRFS info (device sdc): leaf 30539776 gen 7 total ptrs 557 free space 2092 owner 5
[87849.879516] BTRFS info (device sdc): refs 1 lock_owner 0 current 2099108
[87849.880613] item 0 key (1181 1 0) itemoff 65275 itemsize 160
[87849.881544] inode generation 6 size 0 mode 100644
[87849.882692] item 1 key (1181 12 257) itemoff 65258 itemsize 17
(...)
[87850.562549] item 556 key (1458 12 257) itemoff 16017 itemsize 14
[87850.563349] BTRFS error (device dm-0): block=30539776 write time tree block corruption detected
[87850.564386] ------------[ cut here ]------------
[87850.564920] WARNING: CPU: 3 PID: 2099108 at fs/btrfs/disk-io.c:465 csum_one_extent_buffer+0xed/0x100 [btrfs]
[87850.566129] Modules linked in: btrfs dm_zero dm_snapshot (...)
[87850.573789] CPU: 3 PID: 2099108 Comm: mount Not tainted 5.12.0-rc8-btrfs-next-86 #1
(...)
[87850.587481] Call Trace:
[87850.587768] btree_csum_one_bio+0x244/0x2b0 [btrfs]
[87850.588354] ? btrfs_bio_fits_in_stripe+0xd8/0x110 [btrfs]
[87850.589003] btrfs_submit_metadata_bio+0xb7/0x100 [btrfs]
[87850.589654] submit_one_bio+0x61/0x70 [btrfs]
[87850.590248] submit_extent_page+0x91/0x2f0 [btrfs]
[87850.590842] write_one_eb+0x175/0x440 [btrfs]
[87850.591370] ? find_extent_buffer_nolock+0x1c0/0x1c0 [btrfs]
[87850.592036] btree_write_cache_pages+0x1e6/0x610 [btrfs]
[87850.592665] ? free_debug_processing+0x1d5/0x240
[87850.593209] do_writepages+0x43/0xf0
[87850.593798] ? __filemap_fdatawrite_range+0xa4/0x100
[87850.594391] __filemap_fdatawrite_range+0xc5/0x100
[87850.595196] btrfs_write_marked_extents+0x68/0x160 [btrfs]
[87850.596202] btrfs_write_and_wait_transaction.isra.0+0x4d/0xd0 [btrfs]
[87850.597377] btrfs_commit_transaction+0x794/0xca0 [btrfs]
[87850.598455] ? _raw_spin_unlock_irqrestore+0x32/0x60
[87850.599305] ? kmem_cache_free+0x15a/0x3d0
[87850.600029] btrfs_recover_log_trees+0x346/0x380 [btrfs]
[87850.601021] ? replay_one_extent+0x7d0/0x7d0 [btrfs]
[87850.601988] open_ctree+0x13c9/0x1698 [btrfs]
[87850.602846] btrfs_mount_root.cold+0x13/0xed [btrfs]
[87850.603771] ? kmem_cache_alloc_trace+0x7c9/0x930
[87850.604576] ? vfs_parse_fs_string+0x5d/0xb0
[87850.605293] ? kfree+0x276/0x3f0
[87850.605857] legacy_get_tree+0x30/0x50
[87850.606540] vfs_get_tree+0x28/0xc0
[87850.607163] fc_mount+0xe/0x40
[87850.607695] vfs_kern_mount.part.0+0x71/0x90
[87850.608440] btrfs_mount+0x13b/0x3e0 [btrfs]
(...)
[87850.629477] ---[ end trace 68802022b99a1ea0 ]---
[87850.630849] BTRFS: error (device sdc) in btrfs_commit_transaction:2381: errno=-5 IO failure (Error while writing out transaction)
[87850.632422] BTRFS warning (device sdc): Skipping commit of aborted transaction.
[87850.633416] BTRFS: error (device sdc) in cleanup_transaction:1978: errno=-5 IO failure
[87850.634553] BTRFS: error (device sdc) in btrfs_replay_log:2431: errno=-5 IO failure (Failed to recover log tree)
[87850.637529] BTRFS error (device sdc): open_ctree failed
In this example the inode we moved was a directory, so it was easy to
detect the problem because directories can only have one hard link and
the tree checker immediately detects that. If the moved inode was a file,
then the log replay would succeed and we would end up having both the
new hard link (/mnt/foo) and the old hard link (/mnt/testdir/foo) present,
but only the new one should be present.
Fix this by forcing re-logging of the old parent directory when logging
the new name during a rename operation. This ensures we end up with a log
that is authoritative for a range covering the keys for the old dentry,
therefore causing the old dentry do be deleted when replaying the log.
A test case for fstests will follow up soon.
Fixes:
|
||
Boris Burkov
|
15c7745c9a |
btrfs: return whole extents in fiemap
`xfs_io -c 'fiemap <off> <len>' <file>`
can give surprising results on btrfs that differ from xfs.
btrfs prints out extents trimmed to fit the user input. If the user's
fiemap request has an offset, then rather than returning each whole
extent which intersects that range, we also trim the start extent to not
have start < off.
Documentation in filesystems/fiemap.txt and the xfs_io man page suggests
that returning the whole extent is expected.
Some cases which all yield the same fiemap in xfs, but not btrfs:
dd if=/dev/zero of=$f bs=4k count=1
sudo xfs_io -c 'fiemap 0 1024' $f
0: [0..7]: 26624..26631
sudo xfs_io -c 'fiemap 2048 1024' $f
0: [4..7]: 26628..26631
sudo xfs_io -c 'fiemap 2048 4096' $f
0: [4..7]: 26628..26631
sudo xfs_io -c 'fiemap 3584 512' $f
0: [7..7]: 26631..26631
sudo xfs_io -c 'fiemap 4091 5' $f
0: [7..6]: 26631..26630
I believe this is a consequence of the logic for merging contiguous
extents represented by separate extent items. That logic needs to track
the last offset as it loops through the extent items, which happens to
pick up the start offset on the first iteration, and trim off the
beginning of the full extent. To fix it, start `off` at 0 rather than
`start` so that we keep the iteration/merging intact without cutting off
the start of the extent.
after the fix, all the above commands give:
0: [0..7]: 26624..26631
The merging logic is exercised by fstest generic/483, and I have written
a new fstest for checking we don't have backwards or zero-length fiemaps
for cases like those above.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
Josef Bacik
|
71795ee590 |
btrfs: avoid RCU stalls while running delayed iputs
Generally a delayed iput is added when we might do the final iput, so usually we'll end up sleeping while processing the delayed iputs naturally. However there's no guarantee of this, especially for small files. In production we noticed 5 instances of RCU stalls while testing a kernel release overnight across 1000 machines, so this is relatively common: host count: 5 rcu: INFO: rcu_sched self-detected stall on CPU rcu: ....: (20998 ticks this GP) idle=59e/1/0x4000000000000002 softirq=12333372/12333372 fqs=3208 (t=21031 jiffies g=27810193 q=41075) NMI backtrace for cpu 1 CPU: 1 PID: 1713 Comm: btrfs-cleaner Kdump: loaded Not tainted 5.6.13-0_fbk12_rc1_5520_gec92bffc1ec9 #1 Call Trace: <IRQ> dump_stack+0x50/0x70 nmi_cpu_backtrace.cold.6+0x30/0x65 ? lapic_can_unplug_cpu.cold.30+0x40/0x40 nmi_trigger_cpumask_backtrace+0xba/0xca rcu_dump_cpu_stacks+0x99/0xc7 rcu_sched_clock_irq.cold.90+0x1b2/0x3a3 ? trigger_load_balance+0x5c/0x200 ? tick_sched_do_timer+0x60/0x60 ? tick_sched_do_timer+0x60/0x60 update_process_times+0x24/0x50 tick_sched_timer+0x37/0x70 __hrtimer_run_queues+0xfe/0x270 hrtimer_interrupt+0xf4/0x210 smp_apic_timer_interrupt+0x5e/0x120 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:queued_spin_lock_slowpath+0x17d/0x1b0 RSP: 0018:ffffc9000da5fe48 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000000 RBX: ffff889fa81d0cd8 RCX: 0000000000000029 RDX: ffff889fff86c0c0 RSI: 0000000000080000 RDI: ffff88bfc2da7200 RBP: ffff888f2dcdd768 R08: 0000000001040000 R09: 0000000000000000 R10: 0000000000000001 R11: ffffffff82a55560 R12: ffff88bfc2da7200 R13: 0000000000000000 R14: ffff88bff6c2a360 R15: ffffffff814bd870 ? kzalloc.constprop.57+0x30/0x30 list_lru_add+0x5a/0x100 inode_lru_list_add+0x20/0x40 iput+0x1c1/0x1f0 run_delayed_iput_locked+0x46/0x90 btrfs_run_delayed_iputs+0x3f/0x60 cleaner_kthread+0xf2/0x120 kthread+0x10b/0x130 Fix this by adding a cond_resched_lock() to the loop processing delayed iputs so we can avoid these sort of stalls. CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Rik van Riel <riel@surriel.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Johannes Thumshirn
|
d6f67afbdf |
btrfs: return 0 for dev_extent_hole_check_zoned hole_start in case of error
Commit |
||
Tom Rix
|
77364faf21 |
btrfs: initialize return variable in cleanup_free_space_cache_v1
Static analysis reports this problem
free-space-cache.c:3965:2: warning: Undefined or garbage value returned
return ret;
^~~~~~~~~~
ret is set in the node handling loop. Treat doing nothing as a success
and initialize ret to 0, although it's unlikely the loop would be
skipped. We always have block groups, but as it could lead to
transaction abort in the caller it's better to be safe.
CC: stable@vger.kernel.org # 5.12+
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
Naohiro Aota
|
784daf2b96 |
btrfs: zoned: sanity check zone type
The fstests test case generic/475 creates a dm-linear device that gets changed to a dm-error device. This leads to errors in loading the block group's zone information when running on a zoned file system, ultimately resulting in a list corruption. When running on a kernel with list debugging enabled this leads to the following crash. BTRFS: error (device dm-2) in cleanup_transaction:1953: errno=-5 IO failure kernel BUG at lib/list_debug.c:54! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 2433 Comm: umount Tainted: G W 5.12.0+ #1018 RIP: 0010:__list_del_entry_valid.cold+0x1d/0x47 RSP: 0018:ffffc90001473df0 EFLAGS: 00010296 RAX: 0000000000000054 RBX: ffff8881038fd000 RCX: ffffc90001473c90 RDX: 0000000100001a31 RSI: 0000000000000003 RDI: 0000000000000003 RBP: ffff888308871108 R08: 0000000000000003 R09: 0000000000000001 R10: 3961373532383838 R11: 6666666620736177 R12: ffff888308871000 R13: ffff8881038fd088 R14: ffff8881038fdc78 R15: dead000000000100 FS: 00007f353c9b1540(0000) GS:ffff888627d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f353cc2c710 CR3: 000000018e13c000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btrfs_free_block_groups+0xc9/0x310 [btrfs] close_ctree+0x2ee/0x31a [btrfs] ? call_rcu+0x8f/0x270 ? mutex_lock+0x1c/0x40 generic_shutdown_super+0x67/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x31/0x90 cleanup_mnt+0x13e/0x1b0 task_work_run+0x63/0xb0 exit_to_user_mode_loop+0xd9/0xe0 exit_to_user_mode_prepare+0x3e/0x60 syscall_exit_to_user_mode+0x1d/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae As dm-error has no support for zones, btrfs will run it's zone emulation mode on this device. The zone emulation mode emulates conventional zones, so bail out if the zone bitmap that gets populated on mount sees the zone as sequential while we're thinking it's a conventional zone when creating a block group. Note: this scenario is unlikely in a real wold application and can only happen by this (ab)use of device-mapper targets. CC: stable@vger.kernel.org # 5.12+ Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Anand Jain
|
5e753a817b |
btrfs: fix unmountable seed device after fstrim
The following test case reproduces an issue of wrongly freeing in-use
blocks on the readonly seed device when fstrim is called on the rw sprout
device. As shown below.
Create a seed device and add a sprout device to it:
$ mkfs.btrfs -fq -dsingle -msingle /dev/loop0
$ btrfstune -S 1 /dev/loop0
$ mount /dev/loop0 /btrfs
$ btrfs dev add -f /dev/loop1 /btrfs
BTRFS info (device loop0): relocating block group 290455552 flags system
BTRFS info (device loop0): relocating block group 1048576 flags system
BTRFS info (device loop0): disk added /dev/loop1
$ umount /btrfs
Mount the sprout device and run fstrim:
$ mount /dev/loop1 /btrfs
$ fstrim /btrfs
$ umount /btrfs
Now try to mount the seed device, and it fails:
$ mount /dev/loop0 /btrfs
mount: /btrfs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.
Block 5292032 is missing on the readonly seed device:
$ dmesg -kt | tail
<snip>
BTRFS error (device loop0): bad tree block start, want 5292032 have 0
BTRFS warning (device loop0): couldn't read-tree root
BTRFS error (device loop0): open_ctree failed
From the dump-tree of the seed device (taken before the fstrim). Block
5292032 belonged to the block group starting at 5242880:
$ btrfs inspect dump-tree -e /dev/loop0 | grep -A1 BLOCK_GROUP
<snip>
item 3 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16169 itemsize 24
block group used 114688 chunk_objectid 256 flags METADATA
<snip>
From the dump-tree of the sprout device (taken before the fstrim).
fstrim used block-group 5242880 to find the related free space to free:
$ btrfs inspect dump-tree -e /dev/loop1 | grep -A1 BLOCK_GROUP
<snip>
item 1 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16226 itemsize 24
block group used 32768 chunk_objectid 256 flags METADATA
<snip>
BPF kernel tracing the fstrim command finds the missing block 5292032
within the range of the discarded blocks as below:
kprobe:btrfs_discard_extent {
printf("freeing start %llu end %llu num_bytes %llu:\n",
arg1, arg1+arg2, arg2);
}
freeing start 5259264 end 5406720 num_bytes 147456
<snip>
Fix this by avoiding the discard command to the readonly seed device.
Reported-by: Chris Murphy <lists@colorremedies.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Filipe Manana
|
f9baa501b4 |
btrfs: fix deadlock when cloning inline extents and using qgroups
There are a few exceptional cases where cloning an inline extent needs to copy the inline extent data into a page of the destination inode. When this happens, we end up starting a transaction while having a dirty page for the destination inode and while having the range locked in the destination's inode iotree too. Because when reserving metadata space for a transaction we may need to flush existing delalloc in case there is not enough free space, we have a mechanism in place to prevent a deadlock, which was introduced in commit |
||
|
Filipe Manana
|
626e9f41f7 |
btrfs: fix race leading to unpersisted data and metadata on fsync
When doing a fast fsync on a file, there is a race which can result in the
fsync returning success to user space without logging the inode and without
durably persisting new data.
The following example shows one possible scenario for this:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ touch /mnt/bar
$ xfs_io -f -c "pwrite -S 0xab 0 1M" -c "fsync" /mnt/baz
# Now we have:
# file bar == inode 257
# file baz == inode 258
$ mv /mnt/baz /mnt/foo
# Now we have:
# file bar == inode 257
# file foo == inode 258
$ xfs_io -c "pwrite -S 0xcd 0 1M" /mnt/foo
# fsync bar before foo, it is important to trigger the race.
$ xfs_io -c "fsync" /mnt/bar
$ xfs_io -c "fsync" /mnt/foo
# After this:
# inode 257, file bar, is empty
# inode 258, file foo, has 1M filled with 0xcd
<power failure>
# Replay the log:
$ mount /dev/sdc /mnt
# After this point file foo should have 1M filled with 0xcd and not 0xab
The following steps explain how the race happens:
1) Before the first fsync of inode 258, when it has the "baz" name, its
->logged_trans is 0, ->last_sub_trans is 0 and ->last_log_commit is -1.
The inode also has the full sync flag set;
2) After the first fsync, we set inode 258 ->logged_trans to 6, which is
the generation of the current transaction, and set ->last_log_commit
to 0, which is the current value of ->last_sub_trans (done at
btrfs_log_inode()).
The full sync flag is cleared from the inode during the fsync.
The log sub transaction that was committed had an ID of 0 and when we
synced the log, at btrfs_sync_log(), we incremented root->log_transid
from 0 to 1;
3) During the rename:
We update inode 258, through btrfs_update_inode(), and that causes its
->last_sub_trans to be set to 1 (the current log transaction ID), and
->last_log_commit remains with a value of 0.
After updating inode 258, because we have previously logged the inode
in the previous fsync, we log again the inode through the call to
btrfs_log_new_name(). This results in updating the inode's
->last_log_commit from 0 to 1 (the current value of its
->last_sub_trans).
The ->last_sub_trans of inode 257 is updated to 1, which is the ID of
the next log transaction;
4) Then a buffered write against inode 258 is made. This leaves the value
of ->last_sub_trans as 1 (the ID of the current log transaction, stored
at root->log_transid);
5) Then an fsync against inode 257 (or any other inode other than 258),
happens. This results in committing the log transaction with ID 1,
which results in updating root->last_log_commit to 1 and bumping
root->log_transid from 1 to 2;
6) Then an fsync against inode 258 starts. We flush delalloc and wait only
for writeback to complete, since the full sync flag is not set in the
inode's runtime flags - we do not wait for ordered extents to complete.
Then, at btrfs_sync_file(), we call btrfs_inode_in_log() before the
ordered extent completes. The call returns true:
static inline bool btrfs_inode_in_log(...)
{
bool ret = false;
spin_lock(&inode->lock);
if (inode->logged_trans == generation &&
inode->last_sub_trans <= inode->last_log_commit &&
inode->last_sub_trans <= inode->root->last_log_commit)
ret = true;
spin_unlock(&inode->lock);
return ret;
}
generation has a value of 6 (fs_info->generation), ->logged_trans also
has a value of 6 (set when we logged the inode during the first fsync
and when logging it during the rename), ->last_sub_trans has a value
of 1, set during the rename (step 3), ->last_log_commit also has a
value of 1 (set in step 3) and root->last_log_commit has a value of 1,
which was set in step 5 when fsyncing inode 257.
As a consequence we don't log the inode, any new extents and do not
sync the log, resulting in a data loss if a power failure happens
after the fsync and before the current transaction commits.
Also, because we do not log the inode, after a power failure the mtime
and ctime of the inode do not match those we had before.
When the ordered extent completes before we call btrfs_inode_in_log(),
then the call returns false and we log the inode and sync the log,
since at the end of ordered extent completion we update the inode and
set ->last_sub_trans to 2 (the value of root->log_transid) and
->last_log_commit to 1.
This problem is found after removing the check for the emptiness of the
inode's list of modified extents in the recent commit
|
||
|
Filipe Manana
|
ffb7c2e923 |
btrfs: do not consider send context as valid when trying to flush qgroups
At qgroup.c:try_flush_qgroup() we are asserting that current->journal_info is either NULL or has the value BTRFS_SEND_TRANS_STUB. However allowing for BTRFS_SEND_TRANS_STUB makes no sense because: 1) It is misleading, because send operations are read-only and do not ever need to reserve qgroup space; 2) We already assert that current->journal_info != BTRFS_SEND_TRANS_STUB at transaction.c:start_transaction(); 3) On a kernel without CONFIG_BTRFS_ASSERT=y set, it would result in a crash if try_flush_qgroup() is ever called in a send context, because at transaction.c:start_transaction we cast current->journal_info into a struct btrfs_trans_handle pointer and then dereference it. So just do allow a send context at try_flush_qgroup() and update the comment about it. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
adbd914dcd |
btrfs: zoned: fix silent data loss after failure splitting ordered extent
On a zoned filesystem, sometimes we need to split an ordered extent into 3
different ordered extents. The original ordered extent is shortened, at
the front and at the rear, and we create two other new ordered extents to
represent the trimmed parts of the original ordered extent.
After adjusting the original ordered extent, we create an ordered extent
to represent the pre-range, and that may fail with ENOMEM for example.
After that we always try to create the ordered extent for the post-range,
and if that happens to succeed we end up returning success to the caller
as we overwrite the 'ret' variable which contained the previous error.
This means we end up with a file range for which there is no ordered
extent, which results in the range never getting a new file extent item
pointing to the new data location. And since the split operation did
not return an error, writeback does not fail and the inode's mapping is
not flagged with an error, resulting in a subsequent fsync not reporting
an error either.
It's possibly very unlikely to have the creation of the post-range ordered
extent succeed after the creation of the pre-range ordered extent failed,
but it's not impossible.
So fix this by making sure we only create the post-range ordered extent
if there was no error creating the ordered extent for the pre-range.
Fixes:
|
||
|
Johannes Thumshirn
|
18bb8bbf13 |
btrfs: zoned: automatically reclaim zones
When a file gets deleted on a zoned file system, the space freed is not returned back into the block group's free space, but is migrated to zone_unusable. As this zone_unusable space is behind the current write pointer it is not possible to use it for new allocations. In the current implementation a zone is reset once all of the block group's space is accounted as zone unusable. This behaviour can lead to premature ENOSPC errors on a busy file system. Instead of only reclaiming the zone once it is completely unusable, kick off a reclaim job once the amount of unusable bytes exceeds a user configurable threshold between 51% and 100%. It can be set per mounted filesystem via the sysfs tunable bg_reclaim_threshold which is set to 75% by default. Similar to reclaiming unused block groups, these dirty block groups are added to a to_reclaim list and then on a transaction commit, the reclaim process is triggered but after we deleted unused block groups, which will free space for the relocation process. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Johannes Thumshirn
|
f33720657d |
btrfs: rename delete_unused_bgs_mutex to reclaim_bgs_lock
As a preparation for extending the block group deletion use case, rename the unused_bgs_mutex to reclaim_bgs_lock. Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Johannes Thumshirn
|
01e86008aa |
btrfs: zoned: reset zones of relocated block groups
When relocating a block group the freed up space is not discarded in one big block, but each extent is discarded on its own with -odisard=sync. For a zoned filesystem we need to discard the whole block group at once, so btrfs_discard_extent() will translate the discard into a REQ_OP_ZONE_RESET operation, which then resets the device's zone. Failure to reset the zone is not fatal error. Discussion about the approach and regarding transaction blocking: https://lore.kernel.org/linux-btrfs/CAL3q7H4SjS_d5rBepfTMhU8Th3bJzdmyYd0g4Z60yUgC_rC_ZA@mail.gmail.com/ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Qu Wenruo
|
e9306ad4ef |
btrfs: more graceful errors/warnings on 32bit systems when reaching limits
Btrfs uses internally mapped u64 address space for all its metadata. Due to the page cache limit on 32bit systems, btrfs can't access metadata at or beyond (ULONG_MAX + 1) << PAGE_SHIFT. See how MAX_LFS_FILESIZE and page::index are defined. This is 16T for 4K page size while 256T for 64K page size. Users can have a filesystem which doesn't have metadata beyond the boundary at mount time, but later balance can cause it to create metadata beyond the boundary. And modification to MM layer is unrealistic just for such minor use case. We can't do more than to prevent mounting such filesystem or warn early when the numbers are still within the limits. To address such problem, this patch will introduce the following checks: - Mount time rejection This will reject any fs which has metadata chunk at or beyond the boundary. - Mount time early warning If there is any metadata chunk beyond 5/8th of the boundary, we do an early warning and hope the end user will see it. - Runtime extent buffer rejection If we're going to allocate an extent buffer at or beyond the boundary, reject such request with EOVERFLOW. This is definitely going to cause problems like transaction abort, but we have no better ways. - Runtime extent buffer early warning If an extent buffer beyond 5/8th of the max file size is allocated, do an early warning. Above error/warning message will only be printed once for each fs to reduce dmesg flood. If the mount is rejected, the filesystem will be mountable only on a 64bit host. Link: https://lore.kernel.org/linux-btrfs/1783f16d-7a28-80e6-4c32-fdf19b705ed0@gmx.com/ Reported-by: Erik Jensen <erikjensen@rkjnsn.net> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
0dc16ef4f6 |
btrfs: zoned: fix unpaired block group unfreeze during device replace
When doing a device replace on a zoned filesystem, if we find a block
group with ->to_copy == 0, we jump to the label 'done', which will result
in later calling btrfs_unfreeze_block_group(), even though at this point
we never called btrfs_freeze_block_group().
Since at this point we have neither turned the block group to RO mode nor
made any progress, we don't need to jump to the label 'done'. So fix this
by jumping instead to the label 'skip' and dropping our reference on the
block group before the jump.
Fixes:
|
||
|
Filipe Manana
|
f9690f426b |
btrfs: fix race when picking most recent mod log operation for an old root
Commit |
||
|
Filipe Manana
|
67addf2900 |
btrfs: fix metadata extent leak after failure to create subvolume
When creating a subvolume we allocate an extent buffer for its root node after starting a transaction. We setup a root item for the subvolume that points to that extent buffer and then attempt to insert the root item into the root tree - however if that fails, due to ENOMEM for example, we do not free the extent buffer previously allocated and we do not abort the transaction (as at that point we did nothing that can not be undone). This means that we effectively do not return the metadata extent back to the free space cache/tree and we leave a delayed reference for it which causes a metadata extent item to be added to the extent tree, in the next transaction commit, without having backreferences. When this happens 'btrfs check' reports the following: $ btrfs check /dev/sdi Opening filesystem to check... Checking filesystem on /dev/sdi UUID: dce2cb9d-025f-4b05-a4bf-cee0ad3785eb [1/7] checking root items [2/7] checking extents ref mismatch on [30425088 16384] extent item 1, found 0 backref 30425088 root 256 not referenced back 0x564a91c23d70 incorrect global backref count on 30425088 found 1 wanted 0 backpointer mismatch on [30425088 16384] owner ref check failed [30425088 16384] ERROR: errors found in extent allocation tree or chunk allocation [3/7] checking free space cache [4/7] checking fs roots [5/7] checking only csums items (without verifying data) [6/7] checking root refs [7/7] checking quota groups skipped (not enabled on this FS) found 212992 bytes used, error(s) found total csum bytes: 0 total tree bytes: 131072 total fs tree bytes: 32768 total extent tree bytes: 16384 btree space waste bytes: 124669 file data blocks allocated: 65536 referenced 65536 So fix this by freeing the metadata extent if btrfs_insert_root() returns an error. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
1d8ba9e7e7 |
btrfs: handle remount to no compress during compression
[BUG]
When running btrfs/071 with inode_need_compress() removed from
compress_file_range(), we got the following crash:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Workqueue: btrfs-delalloc btrfs_work_helper [btrfs]
RIP: 0010:compress_file_range+0x476/0x7b0 [btrfs]
Call Trace:
? submit_compressed_extents+0x450/0x450 [btrfs]
async_cow_start+0x16/0x40 [btrfs]
btrfs_work_helper+0xf2/0x3e0 [btrfs]
process_one_work+0x278/0x5e0
worker_thread+0x55/0x400
? process_one_work+0x5e0/0x5e0
kthread+0x168/0x190
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x22/0x30
---[ end trace 65faf4eae941fa7d ]---
This is already after the patch "btrfs: inode: fix NULL pointer
dereference if inode doesn't need compression."
[CAUSE]
@pages is firstly created by kcalloc() in compress_file_extent():
pages = kcalloc(nr_pages, sizeof(struct page *), GFP_NOFS);
Then passed to btrfs_compress_pages() to be utilized there:
ret = btrfs_compress_pages(...
pages,
&nr_pages,
...);
btrfs_compress_pages() will initialize each page as output, in
zlib_compress_pages() we have:
pages[nr_pages] = out_page;
nr_pages++;
Normally this is completely fine, but there is a special case which
is in btrfs_compress_pages() itself:
switch (type) {
default:
return -E2BIG;
}
In this case, we didn't modify @pages nor @out_pages, leaving them
untouched, then when we cleanup pages, the we can hit NULL pointer
dereference again:
if (pages) {
for (i = 0; i < nr_pages; i++) {
WARN_ON(pages[i]->mapping);
put_page(pages[i]);
}
...
}
Since pages[i] are all initialized to zero, and btrfs_compress_pages()
doesn't change them at all, accessing pages[i]->mapping would lead to
NULL pointer dereference.
This is not possible for current kernel, as we check
inode_need_compress() before doing pages allocation.
But if we're going to remove that inode_need_compress() in
compress_file_extent(), then it's going to be a problem.
[FIX]
When btrfs_compress_pages() hits its default case, modify @out_pages to
0 to prevent such problem from happening.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212331
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Johannes Thumshirn
|
1d68128c10 |
btrfs: zoned: fail mount if the device does not support zone append
For zoned btrfs, zone append is mandatory to write to a sequential write only zone, otherwise parallel writes to the same zone could result in unaligned write errors. If a zoned block device does not support zone append (e.g. a dm-crypt zoned device using a non-NULL IV cypher), fail to mount. CC: stable@vger.kernel.org # 5.12 Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
061dde8245 |
btrfs: fix race between transaction aborts and fsyncs leading to use-after-free
There is a race between a task aborting a transaction during a commit,
a task doing an fsync and the transaction kthread, which leads to an
use-after-free of the log root tree. When this happens, it results in a
stack trace like the following:
BTRFS info (device dm-0): forced readonly
BTRFS warning (device dm-0): Skipping commit of aborted transaction.
BTRFS: error (device dm-0) in cleanup_transaction:1958: errno=-5 IO failure
BTRFS warning (device dm-0): lost page write due to IO error on /dev/mapper/error-test (-5)
BTRFS warning (device dm-0): Skipping commit of aborted transaction.
BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0xa4e8 len 4096 err no 10
BTRFS error (device dm-0): error writing primary super block to device 1
BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e000 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e008 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e010 len 4096 err no 10
BTRFS: error (device dm-0) in write_all_supers:4110: errno=-5 IO failure (1 errors while writing supers)
BTRFS: error (device dm-0) in btrfs_sync_log:3308: errno=-5 IO failure
general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b68: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
CPU: 2 PID: 2458471 Comm: fsstress Not tainted 5.12.0-rc5-btrfs-next-84 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:__mutex_lock+0x139/0xa40
Code: c0 74 19 (...)
RSP: 0018:ffff9f18830d7b00 EFLAGS: 00010202
RAX: 6b6b6b6b6b6b6b68 RBX: 0000000000000001 RCX: 0000000000000002
RDX: ffffffffb9c54d13 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff9f18830d7bc0 R08: 0000000000000000 R09: 0000000000000000
R10: ffff9f18830d7be0 R11: 0000000000000001 R12: ffff8c6cd199c040
R13: ffff8c6c95821358 R14: 00000000fffffffb R15: ffff8c6cbcf01358
FS: 00007fa9140c2b80(0000) GS:ffff8c6fac600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa913d52000 CR3: 000000013d2b4003 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? __btrfs_handle_fs_error+0xde/0x146 [btrfs]
? btrfs_sync_log+0x7c1/0xf20 [btrfs]
? btrfs_sync_log+0x7c1/0xf20 [btrfs]
btrfs_sync_log+0x7c1/0xf20 [btrfs]
btrfs_sync_file+0x40c/0x580 [btrfs]
do_fsync+0x38/0x70
__x64_sys_fsync+0x10/0x20
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fa9142a55c3
Code: 8b 15 09 (...)
RSP: 002b:00007fff26278d48 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
RAX: ffffffffffffffda RBX: 0000563c83cb4560 RCX: 00007fa9142a55c3
RDX: 00007fff26278cb0 RSI: 00007fff26278cb0 RDI: 0000000000000005
RBP: 0000000000000005 R08: 0000000000000001 R09: 00007fff26278d5c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000340
R13: 00007fff26278de0 R14: 00007fff26278d96 R15: 0000563c83ca57c0
Modules linked in: btrfs dm_zero dm_snapshot dm_thin_pool (...)
---[ end trace ee2f1b19327d791d ]---
The steps that lead to this crash are the following:
1) We are at transaction N;
2) We have two tasks with a transaction handle attached to transaction N.
Task A and Task B. Task B is doing an fsync;
3) Task B is at btrfs_sync_log(), and has saved fs_info->log_root_tree
into a local variable named 'log_root_tree' at the top of
btrfs_sync_log(). Task B is about to call write_all_supers(), but
before that...
4) Task A calls btrfs_commit_transaction(), and after it sets the
transaction state to TRANS_STATE_COMMIT_START, an error happens before
it waits for the transaction's 'num_writers' counter to reach a value
of 1 (no one else attached to the transaction), so it jumps to the
label "cleanup_transaction";
5) Task A then calls cleanup_transaction(), where it aborts the
transaction, setting BTRFS_FS_STATE_TRANS_ABORTED on fs_info->fs_state,
setting the ->aborted field of the transaction and the handle to an
errno value and also setting BTRFS_FS_STATE_ERROR on fs_info->fs_state.
After that, at cleanup_transaction(), it deletes the transaction from
the list of transactions (fs_info->trans_list), sets the transaction
to the state TRANS_STATE_COMMIT_DOING and then waits for the number
of writers to go down to 1, as it's currently 2 (1 for task A and 1
for task B);
6) The transaction kthread is running and sees that BTRFS_FS_STATE_ERROR
is set in fs_info->fs_state, so it calls btrfs_cleanup_transaction().
There it sees the list fs_info->trans_list is empty, and then proceeds
into calling btrfs_drop_all_logs(), which frees the log root tree with
a call to btrfs_free_log_root_tree();
7) Task B calls write_all_supers() and, shortly after, under the label
'out_wake_log_root', it deferences the pointer stored in
'log_root_tree', which was already freed in the previous step by the
transaction kthread. This results in a use-after-free leading to a
crash.
Fix this by deleting the transaction from the list of transactions at
cleanup_transaction() only after setting the transaction state to
TRANS_STATE_COMMIT_DOING and waiting for all existing tasks that are
attached to the transaction to release their transaction handles.
This makes the transaction kthread wait for all the tasks attached to
the transaction to be done with the transaction before dropping the
log roots and doing other cleanups.
Fixes:
|
||
|
Qu Wenruo
|
c4aec299fa |
btrfs: introduce submit_eb_subpage() to submit a subpage metadata page
The new function, submit_eb_subpage(), will submit all the dirty extent buffers in the page. The major difference between submit_eb_page() and submit_eb_subpage() is: - How to grab extent buffer Now we use find_extent_buffer_nospinlock() other than using page::private. All other different handling is already done in functions like lock_extent_buffer_for_io() and write_one_eb(). Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
f3156df944 |
btrfs: make lock_extent_buffer_for_io() to be subpage compatible
For subpage metadata, we don't use page locking at all. So just skip the page locking part for subpage. The rest of the function can be reused. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
35b6ddfa96 |
btrfs: introduce write_one_subpage_eb() function
The new function, write_one_subpage_eb(), as a subroutine for subpage metadata write, will handle the extent buffer bio submission. The major differences between the new write_one_subpage_eb() and write_one_eb() is: - No page locking When entering write_one_subpage_eb() the page is no longer locked. We only lock the page for its status update, and unlock immediately. Now we completely rely on extent io tree locking. - Extra bitmap update along with page status update Now page dirty and writeback is controlled by btrfs_subpage::dirty_bitmap and btrfs_subpage::writeback_bitmap. They both follow the schema that any sector is dirty/writeback, then the full page gets dirty/writeback. - When to update the nr_written number Now we take a shortcut, if we have cleared the last dirty bit of the page, we update nr_written. This is not completely perfect, but should emulate the old behavior well enough. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
2f3186d8ee |
btrfs: introduce end_bio_subpage_eb_writepage() function
The new function, end_bio_subpage_eb_writepage(), will handle the metadata writeback endio. The major differences involved are: - How to grab extent buffer Now page::private is a pointer to btrfs_subpage, we can no longer grab extent buffer directly. Thus we need to use the bv_offset to locate the extent buffer manually and iterate through the whole range. - Use btrfs_subpage_end_writeback() caller This helper will handle the subpage writeback for us. Since this function is executed under endio context, when grabbing extent buffers it can't grab eb->refs_lock as that lock is not designed to be grabbed under hardirq context. So here introduce a helper, find_extent_buffer_nolock(), for such situation, and convert find_extent_buffer() to use that helper. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
fb686c6824 |
btrfs: check return value of btrfs_commit_transaction in relocation
There are a few places where we don't check the return value of btrfs_commit_transaction in relocation.c. Thankfully all these places have straightforward error handling, so simply change all of the sites at once. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
24213fa46c |
btrfs: do proper error handling in merge_reloc_roots
We have a BUG_ON() if we get an error back from btrfs_get_fs_root(). This honestly should never fail, as at this point we have a solid coordination of fs root to reloc root, and these roots will all be in memory. But in the name of killing BUG_ON()'s remove these and handle the error condition properly, ASSERT()'ing for developers. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
8717cf440d |
btrfs: handle extent corruption with select_one_root properly
In corruption cases we could have paths from a block up to no root at all, and thus we'll BUG_ON(!root) in select_one_root. Handle this by adding an ASSERT() for developers, and returning an error for normal users. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
e0b085b0b0 |
btrfs: cleanup error handling in prepare_to_merge
This probably can't happen even with a corrupt file system, because we would have failed much earlier on than here. However there's no reason we can't just check and bail out as appropriate, so do that and convert the correctness BUG_ON() to an ASSERT(). Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add comment ] Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
57a304cfd4 |
btrfs: do not panic in __add_reloc_root
If we have a duplicate entry for a reloc root then we could have fs corruption that resulted in a double allocation. Since this shouldn't happen unless there is corruption, add an ASSERT(ret != -EEXIST) to all of the callers of __add_reloc_root() to catch any logic mistakes for developers, otherwise normal error handling will happen for normal users. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
3c9258632c |
btrfs: handle __add_reloc_root failures in btrfs_recover_relocation
We can already handle errors appropriately from this function, deal with an error coming from __add_reloc_root appropriately. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add comment ] Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
790c1b8cd4 |
btrfs: do proper error handling in create_reloc_inode
We already handle some errors in this function, and the callers do the correct error handling, so clean up the rest of the function to do the appropriate error handling. There's a little extra work that needs to be done here, as we create the inode item before we create the orphan item. We could potentially add the orphan item, but if we failed to create the inode item we would have to abort the transaction. Instead add a helper to delete the inode item we created in the case that we're unable to look up the inode (this would likely be caused by an ENOMEM), which if it succeeds means we can avoid a transaction abort in this particular error case. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
24cd638902 |
btrfs: remove the extent item sanity checks in relocate_block_group
These checks are all taken care of for us by the tree checker code: - the flags don't change or are updated consistently - the v0 extent item format is invalid and caught in many other places too Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
0ebb6bbbd4 |
btrfs: tree-checker: check for BTRFS_BLOCK_FLAG_FULL_BACKREF being set improperly
We need to validate that a data extent item does not have the FULL_BACKREF flag set on its flags. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
eb6b7fb4b5 |
btrfs: handle extent reference errors in do_relocation
We can already deal with errors appropriately from do_relocation, simply handle any errors that come from changing the refs at this point cleanly. We have to abort the transaction if we fail here as we've modified metadata at this point. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
253e258c34 |
btrfs: handle errors in reference count manipulation in replace_path
If any of the reference count manipulation stuff fails in replace_path we need to abort the transaction, as we've modified the blocks already. We can simply break at this point and everything will be cleaned up. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
0e9873e2fe |
btrfs: handle btrfs_search_slot failure in replace_path
The search can fail for various reasons, in case of errors there's no cleanup to be done so we can pass the error to the caller, adjusting for the case where the key is not found and search slot returns 1. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
45b87c5d25 |
btrfs: handle btrfs_cow_block errors in replace_path
If we error out COWing the root node when doing a replace_path then we simply unlock and free the buffer and return the error. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
7a9213a935 |
btrfs: convert logic BUG_ON()'s in replace_path to ASSERT()'s
A few BUG_ON()'s in replace_path are purely to keep us from making logical mistakes, so replace them with ASSERT()'s. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
592fbcd50c |
btrfs: do proper error handling in btrfs_update_reloc_root
We call btrfs_update_root in btrfs_update_reloc_root, which can fail for all sorts of reasons, including IO errors. Instead of panicing the box lets return the error, now that all callers properly handle those errors. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
bbae13f8ab |
btrfs: handle btrfs_update_reloc_root failure in prepare_to_merge
btrfs_update_reloc_root will will return errors in the future, so handle an error properly in prepare_to_merge. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
7934133fae |
btrfs: handle btrfs_update_reloc_root failure in insert_dirty_subvol
btrfs_update_reloc_root will will return errors in the future, so handle the error properly in insert_dirty_subvol. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
ac54da6c37 |
btrfs: change insert_dirty_subvol to return errors
This will be able to return errors in the future, so change it to return an error and handle the errors appropriately. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
2dd8298eb3 |
btrfs: handle btrfs_update_reloc_root failure in commit_fs_roots
btrfs_update_reloc_root will will return errors in the future, so handle the error properly in commit_fs_roots. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
39200e5908 |
btrfs: validate root::reloc_root after recording root in trans
If we fail to setup a root->reloc_root in a different thread that path will error out, however it still leaves root->reloc_root NULL but would still appear set up in the transaction. Subsequent calls to btrfs_record_root_in_transaction would succeed without attempting to create the reloc root, as the transid has already been updated. Handle this case by making sure we have a root->reloc_root set after a btrfs_record_root_in_transaction call so we don't end up dereferencing a NULL pointer. Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
84c50ba521 |
btrfs: do proper error handling in create_reloc_root
We do memory allocations here, read blocks from disk, all sorts of operations that could easily fail at any given point. Instead of panicing the box, simply return the error back up the chain, all callers at this point have proper error handling. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
00bb36a0e7 |
btrfs: have proper error handling in btrfs_init_reloc_root
create_reloc_root will return errors in the future, and __add_reloc_root can return ENOMEM or EEXIST, so handle these errors properly. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add comment ] Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
03a7e111a9 |
btrfs: return an error from btrfs_record_root_in_trans
We can create a reloc root when we record the root in the trans, which can fail for all sorts of different reasons. Propagate this error up the chain of callers. Future patches will fix the callers of btrfs_record_root_in_trans() to handle the error. Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
f0118cb6bc |
btrfs: handle record_root_in_trans failure in create_pending_snapshot
record_root_in_trans can currently fail, so handle this failure properly. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |