Leave it alone so that it ends up assigned to SCA_PID via its type,
'pid_t', that will look up the pid on the machine thread rb_tree and
possibly find its COMM.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-r7dujgmhtxxfajuunpt1bkuo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the size of builtin-trace.c.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8r3gmymyn3r0ynt4yuzspp9g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To check deeply nested page fault callchains.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wuji34xx003kr88nmqt6jkgf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-shj0fazntmskhjild5i6x73l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prep work for next patches, where we'll need access to the created
evsels, to possibly configure callchains.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2pcgsgnkgellhlcao4aub8tu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have callchain_param.enabled for that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-silwqjc2t25ls42dsvg28pp5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The variable is initialized and then conditionally set to a different
value, but not used when DWARF unwinding is not available, bummer, write
1000 times: "Run make -C tools/perf build-test"...
builtin-trace.c: In function ‘cmd_trace’:
builtin-trace.c:3112:6: error: variable ‘max_stack_user_set’ set but not
used [-Werror=unused-but-set-variable]
bool max_stack_user_set = true;
^
cc1: all warnings being treated as err
Fix it by marking it as __maybe_unused.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 0561499326 ("perf trace: Make --(min,max}-stack imply "--call-graph dwarf"")
Link: http://lkml.kernel.org/n/tip-85r40c5hhv6jnmph77l1hgsr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the chances we'll overflow the mmap buffer, manual fine tuning
trumps this.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wxygbxmp1v9mng1ea28wet02@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If one uses:
# perf trace --min-stack 16
Then it implicitly means that callgraphs should be enabled, and the best
option in terms of widespread availability is "dwarf".
Further work needed to choose a better alternative, LBR, in capable
systems.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xtjmnpkyk42npekxz3kynzmx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to the one in the other tools (report, script, top).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lh7kk5a5t3erwxw31ah0cgar@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not used at all, nuke it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jf2w8ce8nl3wso3vuodg5jci@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This way the print routine merely does printing, not requiring access to
the resolving machinery, which helps disentangling the object files and
easing creating subsets with a limited functionality set.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2ti2jbra8fypdfawwwm3aee3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the size of builtin-trace.c.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ao91htwxdqwlwxr47gbluou1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To better organize all these beautifiers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zrw5zz7cnrs44o5osouyutvt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To better organize all these beautifiers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zbr27mdy9ssdhux3ib2nfa7j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Were the detached tarball (make perf-tar-src-pkg) build was failing because
those definitions aren't available in the system headers.
On RHEL7, for instance:
builtin-trace.c: In function ‘syscall_arg__scnprintf_getrandom_flags’:
builtin-trace.c:1113:14: error: ‘GRND_RANDOM’ undeclared (first use in this function)
P_FLAG(RANDOM);
^
builtin-trace.c:1114:14: error: ‘GRND_NONBLOCK’ undeclared (first use in this function)
P_FLAG(NONBLOCK);
^
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-r8496g24a3kbqynvk6617b0e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Were the detached tarball (make perf-tar-src-pkg) build was failing because
those definitions aren't available in the system headers.
On RHEL7, for instance:
builtin-trace.c: In function ‘syscall_arg__scnprintf_seccomp_op’:
builtin-trace.c:1069:7: error: ‘SECCOMP_SET_MODE_STRICT’ undeclared (first use in this function)
P_SECCOMP_SET_MODE_OP(STRICT);
^
builtin-trace.c:1069:7: note: each undeclared identifier is reported only once for each function it appears in
builtin-trace.c:1070:7: error: ‘SECCOMP_SET_MODE_FILTER’ undeclared (first use in this function)
P_SECCOMP_SET_MODE_OP(FILTER);
^
builtin-trace.c: In function ‘syscall_arg__scnprintf_seccomp_flags’:
builtin-trace.c:1091:14: error: ‘SECCOMP_FILTER_FLAG_TSYNC’ undeclared (first use in this function)
P_FLAG(TSYNC);
^
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4f8dzzwd7g6l5dzz693u7kul@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Doesn't make sense and was causing a segfault, fix it.
# trace -e clone --no-syscalls --event sched:*exec firefox
The -e option can't be used with --no-syscalls.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ccrahezikdk2uebptzr1eyyi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those were converted to be evsel methods long ago, move the
source to where it belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vja8rjmkw3gd5ungaeyb5s2j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We already were able to ask for callchains for a specific event:
# trace -e nanosleep --call dwarf --event sched:sched_switch/call-graph=fp/ usleep 1
This would enable tracing just the "nanosleep" syscall, with callchains
at syscall exit and would ask the kernel for frame pointer callchains to
be enabled for the "sched:sched_switch" tracepoint event, its just that
we were not resolving the callchain and printing it in 'perf trace', do
it:
# trace -e nanosleep --call dwarf --event sched:sched_switch/call-graph=fp/ usleep 1
0.425 ( 0.013 ms): usleep/6718 nanosleep(rqtp: 0x7ffcc1d16e20) ...
0.425 ( ): sched:sched_switch:usleep:6718 [120] S ==> swapper/2:0 [120])
__schedule+0xfe200402 ([kernel.kallsyms])
schedule+0xfe200035 ([kernel.kallsyms])
do_nanosleep+0xfe20006f ([kernel.kallsyms])
hrtimer_nanosleep+0xfe2000dc ([kernel.kallsyms])
sys_nanosleep+0xfe20007a ([kernel.kallsyms])
do_syscall_64+0xfe200062 ([kernel.kallsyms])
return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms])
__nanosleep+0xffff008b8cbe2010 (/usr/lib64/libc-2.22.so)
0.486 ( 0.073 ms): usleep/6718 ... [continued]: nanosleep()) = 0
__nanosleep+0x10 (/usr/lib64/libc-2.22.so)
usleep+0x34 (/usr/lib64/libc-2.22.so)
main+0x1eb (/usr/bin/usleep)
__libc_start_main+0xf0 (/usr/lib64/libc-2.22.so)
_start+0x29 (/usr/bin/usleep)
#
Pretty compact, huh? DWARF callchains for raw_syscalls:sys_exit + frame
pointer callchains for a tracepoint, if your hardware supports LBR, go
wild with /call-graph=lbr/, guess the next step is to lift this from
'perf script':
-F, --fields <str> comma separated output fields prepend with 'type:'. Valid types: hw,sw,trace,raw.
Fields: comm,tid,pid,time,cpu,event,trace,ip,sym,dso,addr,symoff,period,iregs,brstack,brstacksym,flags
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2e7yiv5hqdm8jywlmfivvx2v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We don't need the callchains at the syscall enter tracepoint, just when
finishing it at syscall exit, so reduce the overhead by asking for
callchains just at syscall exit.
Suggested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fja1ods5vqpg42mdz09xcz3r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead receive a callchain_param pointer to configure callchain
aspects, not doing so if NULL is passed.
This will allow fine grained control over which evsels in an evlist
gets callchains enabled.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2mupip6khc92mh5x4nw9to82@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 'perf trace' we're just interested in printing callchains, and we
don't want to use the symbol_conf.use_callchain, so move the callchain
part to a new method.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kcn3romzivcpxb3u75s9nz33@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it receives a FILE, and its more than just the IP, which can even be
requested not to be printed.
For consistency with other similar methods in tools/perf/, name it as
perf_evsel__fprintf_sym() and make it return the number of bytes
printed, just like 'fprintf(3)'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-84gawlqa3lhk63nf0t9vnqnn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now, one can print the call chain for every encountered sys_exit event,
e.g.:
$ perf trace -e nanosleep --call-graph dwarf path/to/ex_sleep
1005.757 (1000.090 ms): ex_sleep/13167 nanosleep(...) = 0
syscall_slow_exit_work ([kernel.kallsyms])
syscall_return_slowpath ([kernel.kallsyms])
int_ret_from_sys_call ([kernel.kallsyms])
__nanosleep (/usr/lib/libc-2.23.so)
[unknown] (/usr/lib/libQt5Core.so.5.6.0)
QThread::sleep (/usr/lib/libQt5Core.so.5.6.0)
main (path/to/ex_sleep)
__libc_start_main (/usr/lib/libc-2.23.so)
_start (path/to/ex_sleep)
Note that it is advised to increase the number of mmap pages to prevent
event losses when using this new feature. Often, adding `-m 10M` to the
`perf trace` invocation is enough.
This feature is also available in strace when built with libunwind via
`strace -k`. Performance wise, this solution is much better:
$ time find path/to/linux &> /dev/null
real 0m0.051s
user 0m0.013s
sys 0m0.037s
$ time perf trace -m 800M --call-graph dwarf find path/to/linux &> /dev/null
real 0m2.624s
user 0m1.203s
sys 0m1.333s
$ time strace -k find path/to/linux &> /dev/null
real 0m35.398s
user 0m10.403s
sys 0m23.173s
Note that it is currently not possible to configure the print output.
Adding such a feature, similar to what is available in `perf script` via
its `--fields` knob can be added later on.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 1460115255-17648-1-git-send-email-milian.wolff@kdab.com
[ Split from a larger patch, do not print the IP, left align,
remove dup call symbol__init(), added man page entry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch allows cloning bpf-output event configuration among multiple
bpf scripts. If there exist a map named '__bpf_output__' and not
configured using 'map:__bpf_output__.event=', this patch clones the
configuration of another '__bpf_stdout__' map. For example, following
command:
# perf trace --ev bpf-output/no-inherit,name=evt/ \
--ev ./test_bpf_trace.c/map:__bpf_stdout__.event=evt/ \
--ev ./test_bpf_trace2.c usleep 100000
equals to:
# perf trace --ev bpf-output/no-inherit,name=evt/ \
--ev ./test_bpf_trace.c/map:__bpf_stdout__.event=evt/ \
--ev ./test_bpf_trace2.c/map:__bpf_stdout__.event=evt/ \
usleep 100000
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1460128045-97310-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're using libaudit for doing name to id and id to syscall name
translations, but that makes 'perf trace' to have to wait for newer
libaudit versions supporting recently added syscalls, such as
"userfaultfd" at the time of this changeset.
We have all the information right there, in the kernel sources, so move
this code to a separate place, wrapped behind functions that will
progressively use the kernel source files to extract the syscall table
for use in 'perf trace'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-i38opd09ow25mmyrvfwnbvkj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That is used in both live runs, i.e.:
# trace ls
As when processing events recorded in a perf.data file:
# trace -i perf.data
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-901l6yebnzeqg7z8mbaf49xb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We catch this record to provide a visual indication that events are
getting lost, then call the default method to allow extra logging shared
with the other tools to take place.
This extra logging was done twice because we were continuing to the
"default" clause where machine__process_event() will end up calling
machine__process_lost_event() again, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wus2zlhw3qo24ye84ewu4aqw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid parsing event->header.misc in many locations.
This will also allow setting perf.sample.{ip,cpumode} in a single place,
from tracepoint fields, as needed by 'perf kvm' with PPC guests, where
the guest hardware counters is not available at the host.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qp3yradhyt6q3wl895b1aat0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Format fields of a syscall have the first variable '__syscall_nr' or
'nr' that mean the syscall number. But it isn't relevant here so drop
it.
'nr' among fields of syscall was renamed '__syscall_nr'. So add
exception handling to drop '__syscall_nr' and modify the comment for
this excpetion handling.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1456492465-5946-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Without this patch BPF map configuration is not applied.
Command like this:
# ./perf trace --ev bpf-output/no-inherit,name=evt/ \
--ev ./test_bpf_trace.c/map:channel.event=evt/ \
usleep 100000
Load BPF files without error, but since map:channel.event=evt is not
applied, bpf-output event not work.
This patch allows 'perf trace' load and run BPF scripts.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the subcommand-related files from perf to a new library named
libsubcmd.a.
Since we're moving files anyway, go ahead and rename 'exec_cmd.*' to
'exec-cmd.*' to be consistent with the naming of all the other files.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c0a838d4c878ab17fee50998811612b2281355c1.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Propagate error info from tp_format via ERR_PTR to get it all the way
down to the parse-event.c tracepoint adding routines. Following
functions now return pointer with encoded error:
- tp_format
- trace_event__tp_format
- perf_evsel__newtp_idx
- perf_evsel__newtp
This affects several other places in perf, that cannot use pointer check
anymore, but must utilize the err.h interface, when getting error
information from above functions list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Link: http://lkml.kernel.org/r/1441615087-13886-5-git-send-email-jolsa@kernel.org
[ Add two missing ERR_PTR() and one IS_ERR() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>