Some services explicitly return an error code in their response, but
others rely on the system controller to set a status in its status
register. The meaning of the bits varies based on what service is
requested, so pass it back up to the driver that requested the service
in the first place. The field in the message struct already existed, but
was unused until now.
If the system controller is busy, in which case we should never actually
be in the interrupt handler, or if the service fails the mailbox itself
should not be read. Callers should check the status before operating on
the response.
There's an existing, but unused, #define for the mailbox mask - but it
was incorrect. It was doing a GENMASK_ULL(32, 16) which should've just
been a GENMASK(31, 16), so fix that up and start using it.
Fixes: 83d7b15608 ("mbox: add polarfire soc system controller mailbox")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
add MT8186 cmdq support
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
add gce ddr enable control flow when gce suspend/resume
when all cmdq instruction task has been processed done,
we need set this gce ddr enable to disable status to tell
cmdq hardware gce there is none task need process, and the hardware
can go into idle mode and no access ddr anymore, then the spm can go
into suspend.
the original issue is gce still access ddr when cmdq suspend function
call, but there is no task run.
so, we need control gce access ddr with this flow.
when cmdq suspend function, there is no task need process, we can
disable gce access ddr, to make sure system go into suspend success.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
if gce work control by software, we need set software enable
for MT8186 Soc
there is a handshake flow between gce and ddr hardware,
if not set ddr enable flag of gce, ddr will fall into idle
mode, then gce instructions will not process done.
we need set this flag of gce to tell ddr when gce is idle or busy
controlled by software flow.
0x48[2:0] means control by software
0x48[18:16] means ddr enable
0x48[2:0] is pre-condition of 0x48[18:16].
if we want set 0x48[18:16] ddr enable, 0x48[2:0] must be set at same
time.
and only these bits is useful, other bits is useless bits
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Use GCE_CTRL_BY_SW definition instead of number
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Directly get the match data with device_get_match_data().
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Document the sc8280xp compatible, and at the same time also make sure
the list is sorted alphabetically.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Defaulting the build to ARCH_K3 for the TI message manager driver.
Signed-off-by: Nicolas Frayer <nfrayer@baylibre.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Enable SM4250 APCS IPC support by adding the compatible.
It reuses msm8994_apcs_data.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Fix those make warnings:
arch/parisc/kernel/vdso32/Makefile:30: FORCE prerequisite is missing
arch/parisc/kernel/vdso64/Makefile:30: FORCE prerequisite is missing
Add the missing FORCE prerequisites for all build targets identified by
"make help".
Fixes: e1f86d7b4b ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # 5.18+
No need to have specific locking for console I/O since
the PDC functions provide an own locking.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # 6.1+
The kgdb console is already implemented and registered in pdc_cons.c,
so the duplicate code can be dropped.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # 6.1+
Utilize pdc_lock spinlock to protect parallel modifications of the
iodc_dbuf[] buffer, check length to prevent buffer overflow of
iodc_dbuf[], drop the iodc_retbuf[] buffer and fix some wrong
indentings.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # 6.0+
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-12-15 (igc)
Muhammad Husaini Zulkifli says:
This patch series fixes bugs for the Time-Sensitive Networking(TSN)
Qbv Scheduling features.
An overview of each patch series is given below:
Patch 1: Using a first flag bit to schedule a packet to the next cycle if
packet cannot fit in current Qbv cycle.
Patch 2: Enable strict cycle for Qbv scheduling.
Patch 3: Prevent user to set basetime less than zero during tc config.
Patch 4: Allow the basetime enrollment with zero value.
Patch 5: Calculate the new end time value to exclude the time interval that
exceed the cycle time as user can specify the cycle time in tc config.
Patch 6: Resolve the HW bugs where the gate is not fully closed.
---
This contains the net patches from this original pull request:
https://lore.kernel.org/netdev/20221205212414.3197525-1-anthony.l.nguyen@intel.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It's quite possible that we got woken up because task_work was queued,
and we need to process this task_work to generate the events waited for.
If we return to the wait loop without running task_work, we'll end up
adding the task to the waitqueue again, only to call
io_cqring_wait_schedule() again which will run the task_work. This is
less efficient than it could be, as it requires adding to the cq_wait
queue again. It also triggers the wakeup path for completions as
cq_wait is now non-empty with the task itself, and it'll require another
lock grab and deletion to remove ourselves from the waitqueue.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The rcu_poll_gp_seq_end() and rcu_poll_gp_seq_end_unlocked() both check
that interrupts are enabled, as they normally should be when waiting for
an RCU grace period. Except that it is legal to wait for grace periods
during early boot, before interrupts have been enabled for the first time,
and polling for grace periods is required to work during this time.
This can result in false-positive lockdep splats in the presence of
boot-time-initiated tracing.
This commit therefore conditions those interrupts-enabled checks on
rcu_scheduler_active having advanced past RCU_SCHEDULER_INACTIVE, by
which time interrupts have been enabled.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
PMD_SHIFT isn't defined if CONFIG_PGTABLE_LEVELS == 3, and as
such the kernel test robot found this warning:
In file included from include/linux/pgtable.h:6,
from arch/parisc/kernel/head.S:23:
arch/parisc/include/asm/pgtable.h:169:32: warning: "PMD_SHIFT" is not defined, evaluates to 0 [-Wundef]
169 | #if (KERNEL_INITIAL_ORDER) >= (PMD_SHIFT)
Avoid the warning by using PLD_SHIFT and BITS_PER_PTE.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org> # 6.0+
Adjust some MADV_XXX constants to be in sync what their values are on
all other platforms. There is currently no reason to have an own
numbering on parisc, but it requires workarounds in many userspace
sources (e.g. glibc, qemu, ...) - which are often forgotten and thus
introduce bugs and different behaviour on parisc.
A wrapper avoids an ABI breakage for existing userspace applications by
translating any old values to the new ones, so this change allows us to
move over all programs to the new ABI over time.
Signed-off-by: Helge Deller <deller@gmx.de>
start_task() calls create_singlethread_workqueue() and not checked the
ret value, which may return NULL. And a null-ptr-deref may happen:
start_task()
create_singlethread_workqueue() # failed, led_wq is NULL
queue_delayed_work()
queue_delayed_work_on()
__queue_delayed_work() # warning here, but continue
__queue_work() # access wq->flags, null-ptr-deref
Check the ret value and return -ENOMEM if it is NULL.
Fixes: 3499495205 ("[PARISC] Use work queue in LED/LCD driver instead of tasklet.")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Use task_work_pending() as a better test for whether we have task_work
or not, TIF_NOTIFY_SIGNAL is only valid if the any of the task_work
items had been queued with TWA_SIGNAL as the notification mechanism.
Hence task_work_pending() is a more reliable check.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Randomize the per-cpu entry areas
Cleanups:
* Have CR3_ADDR_MASK use PHYSICAL_PAGE_MASK instead of open
coding it
* Move to "native" set_memory_rox() helper
* Clean up pmd_get_atomic() and i386-PAE
* Remove some unused page table size macros
-----BEGIN PGP SIGNATURE-----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=wwVF
-----END PGP SIGNATURE-----
Merge tag 'x86_mm_for_6.2_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen:
"New Feature:
- Randomize the per-cpu entry areas
Cleanups:
- Have CR3_ADDR_MASK use PHYSICAL_PAGE_MASK instead of open coding it
- Move to "native" set_memory_rox() helper
- Clean up pmd_get_atomic() and i386-PAE
- Remove some unused page table size macros"
* tag 'x86_mm_for_6.2_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
x86/mm: Ensure forced page table splitting
x86/kasan: Populate shadow for shared chunk of the CPU entry area
x86/kasan: Add helpers to align shadow addresses up and down
x86/kasan: Rename local CPU_ENTRY_AREA variables to shorten names
x86/mm: Populate KASAN shadow for entire per-CPU range of CPU entry area
x86/mm: Recompute physical address for every page of per-CPU CEA mapping
x86/mm: Rename __change_page_attr_set_clr(.checkalias)
x86/mm: Inhibit _PAGE_NX changes from cpa_process_alias()
x86/mm: Untangle __change_page_attr_set_clr(.checkalias)
x86/mm: Add a few comments
x86/mm: Fix CR3_ADDR_MASK
x86/mm: Remove P*D_PAGE_MASK and P*D_PAGE_SIZE macros
mm: Convert __HAVE_ARCH_P..P_GET to the new style
mm: Remove pointless barrier() after pmdp_get_lockless()
x86/mm/pae: Get rid of set_64bit()
x86_64: Remove pointless set_64bit() usage
x86/mm/pae: Be consistent with pXXp_get_and_clear()
x86/mm/pae: Use WRITE_ONCE()
x86/mm/pae: Don't (ab)use atomic64
mm/gup: Fix the lockless PMD access
...
- Return MSI_XA_DOMAIN_SIZE as the maximum MSI index when the architecture
does not make use of irq domains instead of returning 0, which is pretty
limiting.
- Check for the presence of an irq domain when validating the MSI iterator,
as s390/powerpc won't have one.
- Fix powerpc's MSI backends which fail to clear the descriptor's IRQ field
on teardown, leading to a splat and leaked descriptors.
-----BEGIN PGP SIGNATURE-----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=yuHx
-----END PGP SIGNATURE-----
Merge tag 'msi-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms
Pull MSI fixes from Marc Zyngier:
"Thomas tasked me with sending out a few urgent fixes after the giant
MSI rework that landed in 6.2, as both s390 and powerpc ended-up
suffering from it (they do not use the full core code infrastructure,
leading to these previously undetected issues):
- Return MSI_XA_DOMAIN_SIZE as the maximum MSI index when the
architecture does not make use of irq domains instead of returning
0, which is pretty limiting.
- Check for the presence of an irq domain when validating the MSI
iterator, as s390/powerpc won't have one.
- Fix powerpc's MSI backends which fail to clear the descriptor's IRQ
field on teardown, leading to a splat and leaked descriptors"
* tag 'msi-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms:
powerpc/msi: Fix deassociation of MSI descriptors
genirq/msi: Return MSI_XA_DOMAIN_SIZE as the maximum MSI index when no domain is present
genirq/msi: Check for the presence of an irq domain when validating msi_ctrl
* misc. small fixes
-----BEGIN PGP SIGNATURE-----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=H70N
-----END PGP SIGNATURE-----
Merge tag 'hsi-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI updates from Sebastian Reichel:
- misc small fixes
* tag 'hsi-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: omap_ssi_core: Fix error handling in ssi_init()
headers: Remove some left-over license text in include/uapi/linux/hsi/
HSI: omap_ssi_core: fix possible memory leak in ssi_probe()
HSI: omap_ssi_core: fix unbalanced pm_runtime_disable()
HSI: ssi_protocol: Fix return type of ssip_pn_xmit()
- bq25890: add charge voltage/current support
- bd99954: convert to linear range
- convert all i2c drivers to use probe_new
- misc. fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=xxhs
-----END PGP SIGNATURE-----
Merge tag 'for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- bq25890: add charge voltage/current support
- bd99954: convert to linear range
- convert all i2c drivers to use probe_new
- misc fixes and cleanups
* tag 'for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (51 commits)
power: supply: fix null pointer dereferencing in power_supply_get_battery_info
power: supply: bq25890: Fix usb-notifier probe and remove races
power: supply: bq25890: Ensure pump_express_work is cancelled on remove
power: supply: Fix refcount leak in rk817_charger_probe
power: supply: bq25890: Only use pdata->regulator_init_data for vbus
power: supply: ab8500: Fix error handling in ab8500_charger_init()
power: supply: cw2015: Fix potential null-ptr-deref in cw_bat_probe()
power: supply: z2_battery: Fix possible memleak in z2_batt_probe()
power: supply: z2_battery: Convert to i2c's .probe_new()
power: supply: ucs1002: Convert to i2c's .probe_new()
power: supply: smb347: Convert to i2c's .probe_new()
power: supply: sbs-manager: Convert to i2c's .probe_new()
power: supply: sbs: Convert to i2c's .probe_new()
power: supply: rt9455: Convert to i2c's .probe_new()
power: supply: rt5033_battery: Convert to i2c's .probe_new()
power: supply: max17042_battery: Convert to i2c's .probe_new()
power: supply: max17040: Convert to i2c's .probe_new()
power: supply: max14656: Convert to i2c's .probe_new()
power: supply: ltc4162-l: Convert to i2c's .probe_new()
power: supply: ltc2941: Convert to i2c's .probe_new()
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmOcmvEACgkQ+iyteGJfRso1OwCfWAZIdbdWdeEVq33zAT4/TZKE
foYAn0ebKrOX26HEAmGgZy4Ze2pdFxVo
=toMy
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Advantech EC watchdog driver
- Add support for MT6795 Helio X10 watchdog and toprgu
- Add support for MT8188 watchdog device
- Remove #ifdef guards for PM related functions
- Other fixes and improvements
* tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: aspeed: Enable pre-timeout interrupt
watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running
watchdog: rn5t618: add support for read out bootstatus
watchdog: kempld: Remove #ifdef guards for PM related functions
watchdog: omap: Remove #ifdef guards for PM related functions
watchdog: twl4030: Remove #ifdef guards for PM related functions
watchdog: at91rm9200: Remove #ifdef guards for PM related functions
watchdog: Add Advantech EC watchdog driver
dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT8173
dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT6795
dt-bindings: watchdog: mediatek: Convert mtk-wdt to json-schema
watchdog: mediatek: mt8188: add wdt support
dt-bindings: reset: mt8188: add toprgu reset-controller header file
dt-bindings: watchdog: Add compatible for MediaTek MT8188
watchdog: mtk_wdt: Add support for MT6795 Helio X10 watchdog and toprgu
lot. Plus, there are some bugfixes as a bonus.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQRPfPO7r0eAhk010v0w5/Bqldv68gUCY5xICAAKCRAw5/Bqldv6
8nkhAJ9lqVnS7+m2eq5w1gQlgd2ToktRaQCfcj7WPznJCe3dPVpwSsWxa//B1Rw=
=B8QS
-----END PGP SIGNATURE-----
Merge tag 'leds-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Lee Jones offered his help with maintaining LEDs, thanks a lot.
Plus, there are some bugfixes as a bonus"
* tag 'leds-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: MAINTAINERS: include dt-bindings headers
leds: qcom,pm8058-led: Convert to DT schema
leds: use sysfs_emit() to instead of scnprintf()
leds: is31fl319x: Fix setting current limit for is31fl319{0,1,3}
MAINTAINERS: Add additional co-maintainer to LEDs
leds: lp5523: fix out-of-bounds bug in lp5523_selftest()
dt-bindings: leds: Add 'cpuX' to 'linux,default-trigger'
led: qcom-lpg: Fix sleeping in atomic
leds: max8997: Don't error if there is no pdata
leds: lp55xx: remove variable j
leds-pca955x: Remove the unused function pca95xx_num_led_regs()
Fix two build warnings on 32 bit platforms
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY50UewAKCRCFwuHvBreF
YazuAQCHY/yOiziPBqNvI9jSb/MVGh1oaZQZRTkt5fOvLSGt8gD/Rv30/h6EcKfG
S5A6eQ3qrVzEhp7P8mST2Q/MkGmQ+AQ=
=Qw7m
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Fix two build warnings on 32 bit platforms
It seems the linux-next CI and 0-day bot are not testing enough 32 bit
configurations, as soon as you merged the rdma pull request there were
two instant reports of warnings on these sytems that I would have
thought should have been covered by time in linux-next
Anyhow, here are the fixes so people don't hit problems with -Werror"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/siw: Fix pointer cast warning
RDMA/rxe: Fix compile warnings on 32-bit
- Revert a change to delete_work_func() that has gone wrong in commit
c412a97cf6 ("gfs2: Use TRY lock in gfs2_inode_lookup for UNLINKED
inodes").
- Avoid dequeuing GL_ASYNC glock holders twice by first checking if the
holder is still queued.
- gfs2: Always check the inode size of inline inodes when reading in
inodes to prevent corrupt filesystem images from causing weid errors.
- Properly handle a race between gfs2_create_inode() and
gfs2_inode_lookup() that causes insert_inode_locked4() to return
-EBUSY.
- Fix and clean up the interaction between gfs2_create_inode() and
gfs2_evict_inode() by completely handling the inode deallocation and
destruction in gfs2_evict_inode().
- Remove support for glock holder auto-demotion as we have no current
plans of using this feature again.
- And a few more minor cleanups and clarifications.
-----BEGIN PGP SIGNATURE-----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=mwok
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v6.1-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updtaes from Andreas Gruenbacher:
- Revert a change to delete_work_func() that has gone wrong in commit
c412a97cf6 ("gfs2: Use TRY lock in gfs2_inode_lookup for UNLINKED
inodes").
- Avoid dequeuing GL_ASYNC glock holders twice by first checking if the
holder is still queued.
- gfs2: Always check the inode size of inline inodes when reading in
inodes to prevent corrupt filesystem images from causing weid errors.
- Properly handle a race between gfs2_create_inode() and
gfs2_inode_lookup() that causes insert_inode_locked4() to return
-EBUSY.
- Fix and clean up the interaction between gfs2_create_inode() and
gfs2_evict_inode() by completely handling the inode deallocation and
destruction in gfs2_evict_inode().
- Remove support for glock holder auto-demotion as we have no current
plans of using this feature again.
- And a few more minor cleanups and clarifications.
* tag 'gfs2-v6.1-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Remove support for glock holder auto-demotion (2)
gfs2: Remove support for glock holder auto-demotion
gfs2: Minor gfs2_try_evict cleanup
gfs2: Partially revert gfs2_inode_lookup change
gfs2: Add gfs2_inode_lookup comment
gfs2: Uninline and improve glock_{set,clear}_object
gfs2: Simply dequeue iopen glock in gfs2_evict_inode
gfs2: Clean up after gfs2_create_inode rework
gfs2: Avoid dequeuing GL_ASYNC glock holders twice
gfs2: Make gfs2_glock_hold return its glock argument
gfs2: Always check inode size of inline inodes
gfs2: Cosmetic gfs2_dinode_{in,out} cleanup
gfs2: Handle -EBUSY result of insert_inode_locked4
gfs2: Fix and clean up create / evict interaction
gfs2: Clean up initialization of "ip" in gfs2_create_inode
gfs2: Get rid of ghs[] in gfs2_create_inode
gfs2: Add extra error check in alloc_dinode
When CONFIG_EFI_ZBOOT is enabled, the binary name is not Image.gz
anymore but vmlinuz.efi. No vmlinuz gets put into the tarball as the
buildtar script doesn't recognize this name. Remedy this by adding the
binary name to the list of acceptable files to package.
Reported-by: CKI Project <cki-project@redhat.com>
Signed-off-by: Veronika Kabatova <vkabatov@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since 2f2940d168 ("genirq/msi: Remove filter from
msi_free_descs_free_range()"), the core MSI code relies on the
msi_desc->irq field to have been cleared before the descriptor
can be freed, as it indicates that there is no association with
a device anymore.
The irq domain code provides this guarantee, and so does s390,
which is one of the two architectures not using irq domains for
MSIs.
Powerpc, however, is missing this particular requirements,
leading in a splat and leaked MSI descriptors.
Adding the now required irq reset to the handful of powerpc backends
that implement MSIs fixes that particular problem.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/70dab88e-6119-0c12-7c6a-61bcbe239f66@roeck-us.net
Extending the tail can have some unexpected side effects if a program uses
a helper like BPF_FUNC_skb_pull_data to read partial content beyond the
head skb headlen when all the skbs in the gso frag_list are linear with no
head_frag -
kernel BUG at net/core/skbuff.c:4219!
pc : skb_segment+0xcf4/0xd2c
lr : skb_segment+0x63c/0xd2c
Call trace:
skb_segment+0xcf4/0xd2c
__udp_gso_segment+0xa4/0x544
udp4_ufo_fragment+0x184/0x1c0
inet_gso_segment+0x16c/0x3a4
skb_mac_gso_segment+0xd4/0x1b0
__skb_gso_segment+0xcc/0x12c
udp_rcv_segment+0x54/0x16c
udp_queue_rcv_skb+0x78/0x144
udp_unicast_rcv_skb+0x8c/0xa4
__udp4_lib_rcv+0x490/0x68c
udp_rcv+0x20/0x30
ip_protocol_deliver_rcu+0x1b0/0x33c
ip_local_deliver+0xd8/0x1f0
ip_rcv+0x98/0x1a4
deliver_ptype_list_skb+0x98/0x1ec
__netif_receive_skb_core+0x978/0xc60
Fix this by marking these skbs as GSO_DODGY so segmentation can handle
the tail updates accordingly.
Fixes: 3dcbdb134f ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list")
Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/1671084718-24796-1-git-send-email-quic_subashab@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Take the instance lock around devlink_nl_fill() when dumping,
doit takes it already.
We are only dumping basic info so in the worst case we were risking
data races around the reload statistics. Until the big devlink mutex
was removed all relevant code was protected by it, so the missing
instance lock was not exposed.
Fixes: d3efc2a6a6 ("net: devlink: remove devlink_mutex")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20221216044122.1863550-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The #ifdef check is incorrect and leads to a warning:
drivers/net/ethernet/ti/am65-cpsw-nuss.c:1679:13: error: 'am65_cpsw_nuss_remove_rx_chns' defined but not used [-Werror=unused-function]
1679 | static void am65_cpsw_nuss_remove_rx_chns(void *data)
It's better to remove the #ifdef here and use the modern
SYSTEM_SLEEP_PM_OPS() macro instead.
Fixes: 24bc19b05f ("net: ethernet: ti: am65-cpsw: Add suspend/resume support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20221215163918.611609-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use a temporary variable to take full advantage of READ_ONCE() behavior.
Without this, the report (and even the test) might be out of sync with
the initial test.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/Y5x7GXeluFmZ8E0E@hirez.programming.kicks-ass.net
Fixes: 9fc9e278a5 ("panic: Introduce warn_limit")
Fixes: d4ccd54d28 ("exit: Put an upper limit on how often we can oops")
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Kees Cook <keescook@chromium.org>
The previous build fix left a remaining issue in configurations with
64-bit dma_addr_t on 32-bit architectures:
drivers/infiniband/sw/siw/siw_qp_tx.c: In function 'siw_get_pblpage':
drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
32 | return virt_to_page((void *)paddr);
| ^
Use the same double cast here that the driver uses elsewhere to convert
between dma_addr_t and void*.
Fixes: 0d1b756acf ("RDMA/siw: Pass a pointer to virt_to_page()")
Link: https://lore.kernel.org/r/20221215170347.2612403-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Fix Kconfig dependencies to re-allow the enabling of function graph
tracer and shadow call stacks at the same time.
- Revert the workaround for CPU erratum #2645198 since the CONFIG_
guards were incorrect and the code has therefore not seen any real
exposure in -next.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmOcVWkQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNF/7B/wIGicobLxXMMkuao+ipm5V/eLnVRuVt6WD
T//5ZG+3Td3xON+mdt/byIm/Npl1I2l+NDjK9jIFcS5A/Q7DmwbcxJV+6BhRdb7o
XQxkHsKR2DTbmbeqd0+AkZGJc4jk5D+vuyLeo8jcc6bSpQhepCOV5R5JVOadg9mg
WxuITwsodI9GfQGmupggF6C31yMCYibmlD9WWNW8tNx8TBojU97pJbQaf1h3bC9i
JE9CxBVYmt3Qg5BAB46EdH60lxELyHpEjJNvgvZZpFz4a/bBB47mG7Cy+ECldc5p
LukJnAImydedwgQqgBD0e0HyXoIQ8r8NZ+yNgig2asQxA5DYsI1L
=IZRW
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Fix Kconfig dependencies to re-allow the enabling of function graph
tracer and shadow call stacks at the same time.
- Revert the workaround for CPU erratum #2645198 since the CONFIG_
guards were incorrect and the code has therefore not seen any real
exposure in -next.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Revert "arm64: errata: Workaround possible Cortex-A715 [ESR|FAR]_ELx corruption"
ftrace: Allow WITH_ARGS flavour of graph tracer with shadow call stack
Libraries:
- Drop the old copy of libtraceevent in tools/lib/traceevent/ now that all major distros
ship it from its external repository.
This is now just another feature detection, emitting a warning when the
libtraceevent-dev[el] package isn't installed, disabling the build of perf features
and tools that strictly require parsing things from tracefs while keeping
the core functionality present and working with a subset of the events, the
most used ones like CPU cycles, hardware cache and also vendor events, etc.
This was tested with lots of containers for Fedora, Debian, OpenSUSE, Alpine Linux,
Ubuntu, with cross builds, etc.
Build:
- Update to C standard to gnu11, like was done for the kernel.
- Install the tools/lib/ libraries locally instead of having headers searched
directly from the source code directories, to help the cases where we can
build either from in-kernel source libraries or from the same library shipped
as a distro package, as is the case with libbpf and was the case with
libtraceevent.
perf stat:
- Do not delay the workload with --delay, the delay is just for starting to count
the events, to skip noise at workload startup.
- When we have events for each cgroup, the metric should be printed for each
cgroup separately.
$ perf stat -a --for-each-cgroup system.slice,user.slice --metric-only sleep 1
Performance counter stats for 'system wide':
GHz insn per cycle branch-misses of all branches
system.slice 3.792 0.61 3.24%
user.slice 3.661 2.32 0.37%
- Fix printing field separator in CSV metrics output.
- Fix --metric-only --json output.
- Fix summary output in CSV with --metric-only.
- Update event group check for support of uncore event.
perf test:
- Stop requiring a C toolchain in shell tests, instead add a workload option that has
all the previously C snippets built as part of 'perf test -w' that then get used in
the 'perf test' shell scripts.
- Add event group test for events in multiple PMUs
- The "kernel lock contention analysis" test should not print warnings in quiet mode.
- Add attr tests for ARM64's new VG register.
- Fix record test on KVM guests, as using precise flag with the
br_inst_retired.near_call event causes the test fail on KVM guests, even when
the guests have PMU forwarding enabled and the event itself is supported, so just
remove the precise flag from the event.
- Add mechanism for skipping attr tests on specific kernel versions where it is known that
these checks will fail.
- Skip watchpoint tests if no watchpoints available.
- Add more Intel PT 'perf test' entries: hybrid CPUs, split the packet decoder
into a suite of subtests.
perf script:
- Introduce task analyzer python script, where one first records some events:
Recording can be done in two ways:
$ perf script record tasks-analyzer -- sleep 10
$ perf record -e sched:sched_switch -a -- sleep 10
The script can parse any perf.data files, as long as it has sched:sched_switch events,
other events will be ignored.
The most simple report use case is to just call the script without arguments.
Runtime is the time the task was running on the CPU, Time Out-In is the time
between the process being scheduled *out* and scheduled back *in*. So the last
time span between two executions:
$ perf script report tasks-analyzer
Switched-In Switched-Out CPU PID TID Comm Runtime Time Out-In
15576.658891407 15576.659156086 4 2412 2428 gdbus 265 1949
15576.659111320 15576.659455410 0 2412 2412 gnome-shell 344 2267
15576.659491326 15576.659506173 2 74 74 kworker/2:1 15 13145
15576.659506173 15576.659825748 2 2858 2858 gnome-terminal- 320 63263
15576.659871270 15576.659902872 6 20932 20932 kworker/u16:0 32 2314582
15576.659909951 15576.659945501 3 27264 27264 sh 36 -1
15576.659853285 15576.659971052 7 27265 27265 perf 118 5050741
[...]
perf lock:
- Allow concurrent record and report to support live monitoring of kernel lock
contention without BPF:
# perf lock record -a -o- sleep 1 | perf lock contention -i-
contended total wait max wait avg wait type caller
2 10.27 us 6.17 us 5.13 us spinlock load_balance+0xc03
1 5.29 us 5.29 us 5.29 us rwlock:W ep_scan_ready_list+0x54
1 4.12 us 4.12 us 4.12 us spinlock smpboot_thread_fn+0x116
1 3.28 us 3.28 us 3.28 us mutex pipe_read+0x50
- Implement -t/--threads option when using BPF:
$ sudo ./perf lock contention -abt -E 5 sleep 1
contended total wait max wait avg wait pid comm
1 740.66 ms 740.66 ms 740.66 ms 1950 nv_queue
3 305.50 ms 298.19 ms 101.83 ms 1884 nvidia-modeset/
1 25.14 us 25.14 us 25.14 us 2725038 EventManager_De
12 23.09 us 9.30 us 1.92 us 0 swapper
1 20.18 us 20.18 us 20.18 us 2725033 EventManager_De
- Add -l/--lock-addr to aggregate per-lock-instance contention:
$ sudo ./perf lock contention -abl sleep 1
contended total wait max wait avg wait address symbol
1 36.28 us 36.28 us 36.28 us ffff92615d6448b8
9 10.91 us 1.84 us 1.21 us ffffffffbaed50c0 rcu_state
1 10.49 us 10.49 us 10.49 us ffff9262ac4f0c80
8 4.68 us 1.67 us 585 ns ffffffffbae07a40 jiffies_lock
3 3.03 us 1.45 us 1.01 us ffff9262277861e0
1 924 ns 924 ns 924 ns ffff926095ba9d20
1 436 ns 436 ns 436 ns ffff9260bfda4f60
perf record:
- Add remaining branch filters: "no_cycles", "no_flags" & "hw_index", to be
used with hardware such as Intel's LBR that allows things like stitching
stacks of two samples to overcome the limits of the number of LBR registers.
Symbol resolution:
- Handle .debug files created with 'objcopy --only-keep-debug', where program
headers are zeroed and thus can't be used for adjustments, use the info in
the runtime_ss (runtime ELF) instead.
perf trace:
- Add BPF based augmenter for the 'perf_event_open's 'struct perf_event_attr' argument.
- Add BPF based augmenter for the 'clock_gettime's 'struct timespec' argument.
- In both cases the syscall tracepoint has just the pointer value, we
need to hook a BPF program to collect the pointer contents, and then,
in userspace, pretty print it in 'perf trace'.
perf list:
- Introduce JSON output of events.
- Streamline how the expression specifying what events should be shown is handled,
fixing several corner cases, such as the metric filter that is specified as a glob
but was using strstr().
perf probe:
- Fix to avoid crashing if DW_AT_decl_file is NULL, coping with clang generating
DWARF5 like that.
- Use dwarf_attr_integrate() as generic DWARF attr accessor as it supersedes dwarf_attr(),
supporting abstact origin DIEs.
perf inject:
- Set PERF_RECORD_MISC_BUILD_ID_SIZE in the PERF_RECORD_HEADER_BUILD_ID so that
perf.data readers can get the real build-id size and avoid trailing zeros.
perf data:
- Add tracepoint fields when converting a perf.data file to JSON.
arm64:
- Fix mksyscalltbl, don't lose syscalls due to sort -nu.
- Add Arm Neoverse V2 PMU events.
riscv:
- Add riscv sbi firmware std event files.
- Add Sifive U74 vendor events (JSON) file.
- Add some more events and metrics for Alderlake/Alderlake-N.
Documentation:
- Add data documentation for the PMU structs in the C source code.
Miscellaneous:
- Periodic sanitization of headers, adding missing includes, removing needless ones,
creating new ones, etc.
- Use sig_atomic_t for signal handlers to avoid undefined behaviour in all perf
tools.
- Fixes for libbpf 1.0+ compatibility (maps, etc) on 'perf trace' BPF examples.
- Remove some old perf bpf examples, leave the best ones that demonstrate how
to associate BPF functions to points in the kernel.
- Make quiet mode consistent between tools.
- Use dedicated non-atomic clear/set bit helpers.
- Use "grep -E" instead of "egrep" as recommended by warning emitted by GNU
grep since at least version 3.8.
- Complete list of supported subcommands in the 'perf daemon' help message.
- Update John Garry's email address for arm64 perf tooling on the MAINTAINERS file,
he moved from Huawei to Oracle.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCY5yARAAKCRCyPKLppCJ+
J7bdAQCO4Y4gXKWv+AQc77aptQaCRmWy6T9ynsdv5gOV43NpCwD/TWZz8zcBqLSS
fxYSgf2kOQ3Z9soE4/udsL5sDhFbsgA=
=hLlg
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.2-1-2022-12-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
"Libraries:
- Drop the old copy of libtraceevent in tools/lib/traceevent/ now
that all major distros ship it from its external repository.
This is now just another feature detection, emitting a warning when
the libtraceevent-dev[el] package isn't installed, disabling the
build of perf features and tools that strictly require parsing
things from tracefs while keeping the core functionality present
and working with a subset of the events, the most used ones like
CPU cycles, hardware cache and also vendor events, etc.
This was tested with lots of containers for Fedora, Debian,
OpenSUSE, Alpine Linux, Ubuntu, with cross builds, etc.
Build:
- Update to C standard to gnu11, like was done for the kernel.
- Install the tools/lib/ libraries locally instead of having headers
searched directly from the source code directories, to help the
cases where we can build either from in-kernel source libraries or
from the same library shipped as a distro package, as is the case
with libbpf and was the case with libtraceevent.
perf stat:
- Do not delay the workload with --delay, the delay is just for
starting to count the events, to skip noise at workload startup.
- When we have events for each cgroup, the metric should be printed
for each cgroup separately.
$ perf stat -a --for-each-cgroup system.slice,user.slice --metric-only sleep 1
Performance counter stats for 'system wide':
GHz insn per cycle branch-misses of all branches
system.slice 3.792 0.61 3.24%
user.slice 3.661 2.32 0.37%
- Fix printing field separator in CSV metrics output.
- Fix --metric-only --json output.
- Fix summary output in CSV with --metric-only.
- Update event group check for support of uncore event.
perf test:
- Stop requiring a C toolchain in shell tests, instead add a workload
option that has all the previously C snippets built as part of
'perf test -w' that then get used in the 'perf test' shell scripts.
- Add event group test for events in multiple PMUs
- The "kernel lock contention analysis" test should not print
warnings in quiet mode.
- Add attr tests for ARM64's new VG register.
- Fix record test on KVM guests, as using precise flag with the
br_inst_retired.near_call event causes the test fail on KVM guests,
even when the guests have PMU forwarding enabled and the event
itself is supported, so just remove the precise flag from the
event.
- Add mechanism for skipping attr tests on specific kernel versions
where it is known that these checks will fail.
- Skip watchpoint tests if no watchpoints available.
- Add more Intel PT 'perf test' entries: hybrid CPUs, split the
packet decoder into a suite of subtests.
perf script:
- Introduce task analyzer python script, where one first records some events:
Recording can be done in two ways:
$ perf script record tasks-analyzer -- sleep 10
$ perf record -e sched:sched_switch -a -- sleep 10
The script can parse any perf.data files, as long as it has
sched:sched_switch events, other events will be ignored.
The most simple report use case is to just call the script without
arguments.
Runtime is the time the task was running on the CPU, Time Out-In is
the time between the process being scheduled *out* and scheduled
back *in*. So the last time span between two executions:
$ perf script report tasks-analyzer
Switched-In Switched-Out CPU PID TID Comm Runtime Time Out-In
15576.658891407 15576.659156086 4 2412 2428 gdbus 265 1949
15576.659111320 15576.659455410 0 2412 2412 gnome-shell 344 2267
15576.659491326 15576.659506173 2 74 74 kworker/2:1 15 13145
15576.659506173 15576.659825748 2 2858 2858 gnome-terminal- 320 63263
15576.659871270 15576.659902872 6 20932 20932 kworker/u16:0 32 2314582
15576.659909951 15576.659945501 3 27264 27264 sh 36 -1
15576.659853285 15576.659971052 7 27265 27265 perf 118 5050741
[...]
perf lock:
- Allow concurrent record and report to support live monitoring of
kernel lock contention without BPF:
# perf lock record -a -o- sleep 1 | perf lock contention -i-
contended total wait max wait avg wait type caller
2 10.27 us 6.17 us 5.13 us spinlock load_balance+0xc03
1 5.29 us 5.29 us 5.29 us rwlock:W ep_scan_ready_list+0x54
1 4.12 us 4.12 us 4.12 us spinlock smpboot_thread_fn+0x116
1 3.28 us 3.28 us 3.28 us mutex pipe_read+0x50
- Implement -t/--threads option when using BPF:
$ sudo ./perf lock contention -abt -E 5 sleep 1
contended total wait max wait avg wait pid comm
1 740.66 ms 740.66 ms 740.66 ms 1950 nv_queue
3 305.50 ms 298.19 ms 101.83 ms 1884 nvidia-modeset/
1 25.14 us 25.14 us 25.14 us 2725038 EventManager_De
12 23.09 us 9.30 us 1.92 us 0 swapper
1 20.18 us 20.18 us 20.18 us 2725033 EventManager_De
- Add -l/--lock-addr to aggregate per-lock-instance contention:
$ sudo ./perf lock contention -abl sleep 1
contended total wait max wait avg wait address symbol
1 36.28 us 36.28 us 36.28 us ffff92615d6448b8
9 10.91 us 1.84 us 1.21 us ffffffffbaed50c0 rcu_state
1 10.49 us 10.49 us 10.49 us ffff9262ac4f0c80
8 4.68 us 1.67 us 585 ns ffffffffbae07a40 jiffies_lock
3 3.03 us 1.45 us 1.01 us ffff9262277861e0
1 924 ns 924 ns 924 ns ffff926095ba9d20
1 436 ns 436 ns 436 ns ffff9260bfda4f60
perf record:
- Add remaining branch filters: "no_cycles", "no_flags" & "hw_index",
to be used with hardware such as Intel's LBR that allows things
like stitching stacks of two samples to overcome the limits of the
number of LBR registers.
Symbol resolution:
- Handle .debug files created with 'objcopy --only-keep-debug', where
program headers are zeroed and thus can't be used for adjustments,
use the info in the runtime_ss (runtime ELF) instead.
perf trace:
- Add BPF based augmenter for the 'perf_event_open's 'struct
perf_event_attr' argument.
- Add BPF based augmenter for the 'clock_gettime's 'struct timespec'
argument.
- In both cases the syscall tracepoint has just the pointer value, we
need to hook a BPF program to collect the pointer contents, and
then, in userspace, pretty print it in 'perf trace'.
perf list:
- Introduce JSON output of events.
- Streamline how the expression specifying what events should be
shown is handled, fixing several corner cases, such as the metric
filter that is specified as a glob but was using strstr().
perf probe:
- Fix to avoid crashing if DW_AT_decl_file is NULL, coping with clang
generating DWARF5 like that.
- Use dwarf_attr_integrate() as generic DWARF attr accessor as it
supersedes dwarf_attr(), supporting abstact origin DIEs.
perf inject:
- Set PERF_RECORD_MISC_BUILD_ID_SIZE in the PERF_RECORD_HEADER_BUILD_ID
so that perf.data readers can get the real build-id size and avoid
trailing zeroes.
perf data:
- Add tracepoint fields when converting a perf.data file to JSON.
arm64:
- Fix mksyscalltbl, don't lose syscalls due to sort -nu.
- Add Arm Neoverse V2 PMU events.
riscv:
- Add riscv sbi firmware std event files.
- Add Sifive U74 vendor events (JSON) file.
- Add some more events and metrics for Alderlake/Alderlake-N.
Documentation:
- Add data documentation for the PMU structs in the C source code.
Miscellaneous:
- Periodic sanitization of headers, adding missing includes, removing
needless ones, creating new ones, etc.
- Use sig_atomic_t for signal handlers to avoid undefined behaviour
in all perf tools.
- Fixes for libbpf 1.0+ compatibility (maps, etc) on 'perf trace' BPF
examples.
- Remove some old perf bpf examples, leave the best ones that
demonstrate how to associate BPF functions to points in the kernel.
- Make quiet mode consistent between tools.
- Use dedicated non-atomic clear/set bit helpers.
- Use "grep -E" instead of "egrep" as recommended by warning emitted
by GNU grep since at least version 3.8.
- Complete list of supported subcommands in the 'perf daemon' help
message.
- Update John Garry's email address for arm64 perf tooling on the
MAINTAINERS file, he moved from Huawei to Oracle"
* tag 'perf-tools-for-v6.2-1-2022-12-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (239 commits)
libperf: Fix install_pkgconfig target
perf tools: Use "grep -E" instead of "egrep"
perf stat: Do not delay the workload with --delay
perf evlist: Remove group option.
perf build: Fix python/perf.so library's name
perf test arm64: Add attr tests for new VG register
perf test: Add mechanism for skipping attr tests on kernel versions
perf test: Add mechanism for skipping attr tests on auxiliary vector values
perf test: Add ability to test exit code for attr tests
perf test: add new task-analyzer tests
perf script: task-analyzer add csv support
perf script: Introduce task analyzer python script
perf cs-etm: Print auxtrace info even if OpenCSD isn't linked
perf cs-etm: Cleanup cs_etm__process_auxtrace_info()
perf cs-etm: Tidy up auxtrace info header printing
perf cs-etm: Remove unused stub methods
perf cs-etm: Print unknown header version as an error
perf test: Update perf lock contention test
perf lock contention: Add -l/--lock-addr option
perf lock contention: Implement -t/--threads option for BPF
...
cifs_tcon::status wasn't correctly updated to TID_GOOD after
establishing initial IPC connection thus staying at TID_NEW as long as
it wasn't reconnected.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
This was a mismerge of a semantic conflict in my merge of the driver
core updates, where commit ff62b8e658 ("driver core: make struct
class.devnode() take a const *") changed the devnode function pointer
type. In the meantime, the drm tree I merged earlier had introduced a
new use of that in commit 8bf4889762 ("drivers/accel: define kconfig
and register a new major").
And of course this happens when I'm traveling with my laptop, and thus
didn't do a full allmodconfig build between every pull and before
pushing my work out.
So I only noticed later as I was doing my full build.
Brown-paper-bag-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 71a7507afb Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Devicetree bindings document does not have to say in the title that
it is a "Devicetree binding" or a "schema", but instead just describe
the hardware.
Manual updates to various binding titles, including capitalizing them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # opp
Link: https://lore.kernel.org/r/20221216163815.522628-10-krzysztof.kozlowski@linaro.org
[robh: add trivial-devices.yaml and net/can/microchip,mcp251xfd.yaml]
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY5yc9AAKCRDbK58LschI
g3n4AP4heagqBHPH+WcC0N/Vc4K2dmPmil4ZTuZ/Xt+EMrX0MQEAygWsa272V2C9
vx51DOu5/D+DPC20/1+mRpEnC4JIqAA=
=utn+
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2022-12-16
We've added 7 non-merge commits during the last 2 day(s) which contain
a total of 9 files changed, 119 insertions(+), 36 deletions(-).
1) Fix for recent syzkaller XDP dispatcher update splat, from Jiri Olsa.
2) Fix BPF program refcount leak in LSM attachment failure path,
from Milan Landaverde.
3) Fix BPF program type in map compatibility check for fext,
from Toke Høiland-Jørgensen.
4) Fix a BPF selftest compilation error under !CONFIG_SMP config,
from Yonghong Song.
5) Fix CI to enable CONFIG_FUNCTION_ERROR_INJECTION after it got changed
to a prompt, from Song Liu.
6) Various BPF documentation fixes for socket local storage,
from Donald Hunter.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add a test for using a cpumap from an freplace-to-XDP program
bpf: Resolve fext program type when checking map compatibility
bpf: Synchronize dispatcher update with bpf_dispatcher_xdp_func
bpf: prevent leak of lsm program after failed attach
selftests/bpf: Select CONFIG_FUNCTION_ERROR_INJECTION
selftests/bpf: Fix a selftest compilation error with CONFIG_SMP=n
docs/bpf: Reword docs for BPF_MAP_TYPE_SK_STORAGE
====================
Link: https://lore.kernel.org/r/20221216174540.16598-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Devicetree bindings document does not have to say in the title that
it is a "Devicetree binding", but instead just describe the hardware.
Drop "Devicetree bindings" in various forms:
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-exec sed -i -e 's/^title: [dD]evice[ -]\?[tT]ree [cC]lock [bB]indings\? for \([tT]he \)\?\(.*\)$/title: \u\2 Clock Controller/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-exec sed -i -e 's/^title: [cC]lock [bB]indings\? for \([tT]he \)\?\(.*\)$/title: \u\2 Clock Controller/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Link: https://lore.kernel.org/r/20221216163815.522628-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The Devicetree bindings document does not have to say in the title that
it is a "Devicetree binding", but instead just describe the hardware.
Drop beginning "Devicetree bindings" in various forms:
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-exec sed -i -e 's/^title: [dD]evice[ -]\?[tT]ree [bB]indings\? for \([tT]he \)\?\(.*\)$/title: \u\2/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-exec sed -i -e 's/^title: [bB]indings\? for \([tT]he \)\?\(.*\)$/title: \u\2/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-exec sed -i -e 's/^title: [dD][tT] [bB]indings\? for \([tT]he \)\?\(.*\)$/title: \u\2/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Link: https://lore.kernel.org/r/20221216163815.522628-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.
Drop trailing "bindings" in various forms (also with trailing full
stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq
Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.
Drop trailing "Node|Tree|Generic bindings" in various forms (also with
trailing full stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [nN]ode [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [tT]ree [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [gG]eneric [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\? description\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\? document\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Vinod Koul <vkoul@kernel.org> # phy
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221216163815.522628-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The Devicetree bindings document does not have to say in the title that
it is a "Devicetree binding", but instead just describe the hardware.
Drop trailing "Devicetree bindings" in various forms (also with
trailing full stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[tT]ree [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[nN]ode [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [dD][tT] [bB]indings\?\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # IIO
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Link: https://lore.kernel.org/r/20221216163815.522628-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
