SQs are 32 and not 16 bits, hence it's wrong to use only 16 bits to
store the sq number for which are going to set steering rule, fix that.
Fixes: cb67b83292 ('net/mlx5e: Introduce SRIOV VF representors')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The vport admin original link state will be re-applied after returning
back to legacy mode, it is not right to change the admin link state value
when in switchdev mode.
Use direct vport commands to alter logical vport state in netdev
representor open/close flows rather than the administrative eswitch API.
Fixes: 20a1ea6747 ('net/mlx5e: Support VF vport link state control for SRIOV switchdev mode')
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
It's required to create a modules.alias via MODULE_DEVICE_TABLE helper
for the OF platform driver. Otherwise, module autoloading cannot work.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
MODULE_ALIAS exports information to allow the module to be auto-loaded at
boot for the drivers registered using legacy platform registration.
However, currently the driver is always used by DT-only platform,
MODULE_ALIAS is redundant and should be removed properly.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
We try to hold TX virtqueue mutex in vhost_net_rx_peek_head_len()
after RX virtqueue mutex is held in handle_rx(). This requires an
appropriate lock nesting notation to calm down deadlock detector.
Fixes: 0308813724 ("vhost_net: basic polling support")
Reported-by: syzbot+7f073540b1384a614e09@syzkaller.appspotmail.com
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is needed to support the modem found in HP EliteBook 820 G3.
Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The same fix as in 'bonding: move dev_mc_sync after master_upper_dev_link
in bond_enslave' is needed for team driver.
The panic can be reproduced easily:
ip link add team1 type team
ip link set team1 up
ip link add link team1 vlan1 type vlan id 80
ip link set vlan1 master team1
Fixes: cb41c997d4 ("team: team should sync the port's uc/mc addrs when add a port")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long says:
====================
bonding: a bunch of fixes for dev hwaddr sync in bond_enslave
This patchset is mainly to fix a crash when adding vlan as slave of
bond which is also the parent link in patch 2/3, and also fix some
err process problems in bond_enslave in patch 1/3 and 3/3.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When dev_set_promiscuity(1) succeeds but dev_set_allmulti(1) fails,
dev_set_promiscuity(-1) should be done before going to the err path.
Otherwise, dev->promiscuity will leak.
Fixes: 7e1a1ac1fb ("bonding: Check return of dev_set_promiscuity/allmulti")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Beniamino found a crash when adding vlan as slave of bond which is also
the parent link:
ip link add bond1 type bond
ip link set bond1 up
ip link add link bond1 vlan1 type vlan id 80
ip link set vlan1 master bond1
The call trace is as below:
[<ffffffffa850842a>] queued_spin_lock_slowpath+0xb/0xf
[<ffffffffa8515680>] _raw_spin_lock+0x20/0x30
[<ffffffffa83f6f07>] dev_mc_sync+0x37/0x80
[<ffffffffc08687dc>] vlan_dev_set_rx_mode+0x1c/0x30 [8021q]
[<ffffffffa83efd2a>] __dev_set_rx_mode+0x5a/0xa0
[<ffffffffa83f7138>] dev_mc_sync_multiple+0x78/0x80
[<ffffffffc084127c>] bond_enslave+0x67c/0x1190 [bonding]
[<ffffffffa8401909>] do_setlink+0x9c9/0xe50
[<ffffffffa8403bf2>] rtnl_newlink+0x522/0x880
[<ffffffffa8403ff7>] rtnetlink_rcv_msg+0xa7/0x260
[<ffffffffa8424ecb>] netlink_rcv_skb+0xab/0xc0
[<ffffffffa83fe498>] rtnetlink_rcv+0x28/0x30
[<ffffffffa8424850>] netlink_unicast+0x170/0x210
[<ffffffffa8424bf8>] netlink_sendmsg+0x308/0x420
[<ffffffffa83cc396>] sock_sendmsg+0xb6/0xf0
This is actually a dead lock caused by sync slave hwaddr from master when
the master is the slave's 'slave'. This dead loop check is actually done
by netdev_master_upper_dev_link. However, Commit 1f718f0f4f ("bonding:
populate neighbour's private on enslave") moved it after dev_mc_sync.
This patch is to fix it by moving dev_mc_sync after master_upper_dev_link,
so that this loop check would be earlier than dev_mc_sync. It also moves
if (mode == BOND_MODE_8023AD) into if (!bond_uses_primary) clause as an
improvement.
Note team driver also has this issue, I will fix it in another patch.
Fixes: 1f718f0f4f ("bonding: populate neighbour's private on enslave")
Reported-by: Beniamino Galvani <bgalvani@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
vlan_vids_add_by_dev is called right after dev hwaddr sync, so on
the err path it should unsync dev hwaddr. Otherwise, the slave
dev's hwaddr will never be unsync when this err happens.
Fixes: 1ff412ad77 ("bonding: change the bond's vlan syncing functions with the standard ones")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the qdisc lock was dropped in pfifo_fast we allow multiple
enqueue threads and dequeue threads to run in parallel. On the
enqueue side the skb bit ooo_okay is used to ensure all related
skbs are enqueued in-order. On the dequeue side though there is
no similar logic. What we observe is with fewer queues than CPUs
it is possible to re-order packets when two instances of
__qdisc_run() are running in parallel. Each thread will dequeue
a skb and then whichever thread calls the ndo op first will
be sent on the wire. This doesn't typically happen because
qdisc_run() is usually triggered by the same core that did the
enqueue. However, drivers will trigger __netif_schedule()
when queues are transitioning from stopped to awake using the
netif_tx_wake_* APIs. When this happens netif_schedule() calls
qdisc_run() on the same CPU that did the netif_tx_wake_* which
is usually done in the interrupt completion context. This CPU
is selected with the irq affinity which is unrelated to the
enqueue operations.
To resolve this we add a RUNNING bit to the qdisc to ensure
only a single dequeue per qdisc is running. Enqueue and dequeue
operations can still run in parallel and also on multi queue
NICs we can still have a dequeue in-flight per qdisc, which
is typically per CPU.
Fixes: c5ad119fb6 ("net: sched: pfifo_fast use skb_array")
Reported-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem.
Tested hardware BM806U is mounted on D-Link DWR-921-C3 router.
The USB id is added to qmi_wwan.c to allow QMI communication with
the BM806U.
Tested on 4.14 kernel and OpenWRT.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
and switch to https where possible.
All links have been eyeballed to verify that the domains have
not changed, etc.
Signed-off-by: Sanjeev Gupta <ghane0@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When trying to use the driver (e.g. aplay *.wav), the 4MiB DMA buffer
will get mmapp'ed in 16KiB chunks. But this fails with the 2nd 16KiB
area, as the page offset is outside of the VMA range (size), which is
currently used as size parameter in snd_pcm_lib_default_mmap(). By
using the DMA buffer size (dma_bytes) instead, the complete DMA buffer
can be mmapp'ed and the issue is fixed.
This issue was detected on an ARM platform (TI AM57xx) using the RME
HDSP MADI PCIe soundcard.
Fixes: 657b1989da ("ALSA: pcm - Use dma_mmap_coherent() if available")
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some fixes for 4.16, only for iwlwifi and brcmfmac this time. All
pretty small.
iwlwifi
* fix an issue with the multicast queue
* fix IGTK handling
* fix some missing return value checks
* add support for a HW workaround for issues on some platforms
* a couple of fixes for channel-switch
* a few fixes for the aggregation handling code
brcmfmac
* drop Inter-Access Point Protocol packets by default
* fix check for ISO3166 regulatory code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJatiw3AAoJEG4XJFUm622bU7IH/0sIrhxJw+RJhTFQhRIx+WdN
XPWCb1bUXMwb3+4a+Z3cPuLsKHsv4TJTXtglSvZtihpasr6zALNeoZCb6md5mHz8
lLRWmMsyPQqnVy7mC7CO7qY5u8M6cZFvJgmn3pU8TAcok2r0skFiKCjqhY6A5ZUM
V6dlmjld08i5Y8xGlFPFQwCK9NFNoe2YK5k7U5GeY+0PXK9koT7H7amXcYSnU+Nl
Vrv/MZCGsOYa5E93IhPYkGRBasKqnLcS8+Rf+0zJl1eZuumyMr1+eqgaF1gVRC8w
rTvGyHUMv5OXxw6UHItHlQbW+Wgypdo1qRCfsxsAWOj6W5L1uj258CgSiMcwp1o=
=YWna
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2018-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.16
Some fixes for 4.16, only for iwlwifi and brcmfmac this time. All
pretty small.
iwlwifi
* fix an issue with the multicast queue
* fix IGTK handling
* fix some missing return value checks
* add support for a HW workaround for issues on some platforms
* a couple of fixes for channel-switch
* a few fixes for the aggregation handling code
brcmfmac
* drop Inter-Access Point Protocol packets by default
* fix check for ISO3166 regulatory code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
KMSAN reports use of uninitialized memory in the case when |alen| is
smaller than sizeof(struct sockaddr_nl), and therefore |nladdr| isn't
fully copied from the userspace.
Signed-off-by: Alexander Potapenko <glider@google.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Description:
EEE does not work with lan7800 when AutoSpeed is not set.
(This can happen when EEPROM is not populated or configured incorrectly)
Root-Cause:
When EEE is enabled, the mac config register ASD is not set
i.e. in default state, causing EEE fail.
Fix:
Set the register when eeprom is not present.
Fixes: 55d7de9de6 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the SMC experimental TCP option in a SYN packet is lost on
the server side when SYN Cookies are active. However, the corresponding
SYNACK sent back to the client contains the SMC option. This causes an
inconsistent view of the SMC capabilities on the client and server.
This patch disables the SMC option in the SYNACK when SYN Cookies are
active to avoid this issue.
Fixes: 60e2a77807 ("tcp: TCP experimental option for SMC")
Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SLB bad address handler's trap number fixup does not preserve the
low bit that indicates nonvolatile GPRs have not been saved. This
leads save_nvgprs to skip saving them, and subsequent functions and
return from interrupt will think they are saved.
This causes kernel branch-to-garbage debugging to not have correct
registers, can also cause userspace to have its registers clobbered
after a segfault.
Fixes: f0f558b131 ("powerpc/mm: Preserve CFAR value on SLB miss caused by access to bogus address")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull x86 and PTI fixes from Ingo Molnar:
"Misc fixes:
- fix EFI pagetables freeing
- fix vsyscall pagetable setting on Xen PV guests
- remove ancient CONFIG_X86_PPRO_FENCE=y - x86 is TSO again
- fix two binutils (ld) development version related incompatibilities
- clean up breakpoint handling
- fix an x86 self-test"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Don't use IST entry for #BP stack
x86/efi: Free efi_pgd with free_pages()
x86/vsyscall/64: Use proper accessor to update P4D entry
x86/cpu: Remove the CONFIG_X86_PPRO_FENCE=y quirk
x86/boot/64: Verify alignment of the LOAD segment
x86/build/64: Force the linker to use 2MB page size
selftests/x86/ptrace_syscall: Fix for yet more glibc interference
Pull scheduler fixes from Ingo Molnar:
"Two sched debug output related fixes: a console output fix and
formatting fixes"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Adjust newlines for better alignment
sched/debug: Fix per-task line continuation for console output
Pull locking fixes from Ingo Molnar:
"Two fixes: tighten up a jump-labels warning to not trigger on certain
modules and fix confusing (and non-existent) mutex API documentation"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jump_label: Disable jump labels in __exit code
locking/mutex: Improve documentation
Tabs on a console with long lines do not wrap properly, so correctly
account for the line length when computing the tab placement location.
Reported-by: James Holderness <j4_james@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel build system already takes care of generating the dependency
files. Having the additional -MD in KBUILD_CFLAGS leads to stray
.<pid>.d files in the build directory when we call the cc-option macro.
Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/alpine.LNX.2.21.1803242219380.30139@titan.int.lan.stealer.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull mqueuefs revert from Eric Biederman:
"This fixes a regression that came in the merge window for v4.16.
The problem is that the permissions for mounting and using the
mqueuefs filesystem are broken. The necessary permission check is
missing letting people who should not be able to mount mqueuefs mount
mqueuefs. The field sb->s_user_ns is set incorrectly not allowing the
mounter of mqueuefs to remount and otherwise have proper control over
the filesystem.
Al Viro and I see the path to the necessary fixes differently and I am
not even certain at this point he actually sees all of the necessary
fixes. Given a couple weeks we can probably work something out but I
don't see the review being resolved in time for the final v4.16. I
don't want v4.16 shipping with a nasty regression. So unfortunately I
am sending a revert"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
Revert "mqueue: switch to on-demand creation of internal mount"
This reverts commit 36735a6a2b.
Aleksa Sarai <asarai@suse.de> writes:
> [REGRESSION v4.16-rc6] [PATCH] mqueue: forbid unprivileged user access to internal mount
>
> Felix reported weird behaviour on 4.16.0-rc6 with regards to mqueue[1],
> which was introduced by 36735a6a2b ("mqueue: switch to on-demand
> creation of internal mount").
>
> Basically, the reproducer boils down to being able to mount mqueue if
> you create a new user namespace, even if you don't unshare the IPC
> namespace.
>
> Previously this was not possible, and you would get an -EPERM. The mount
> is the *host* mqueue mount, which is being cached and just returned from
> mqueue_mount(). To be honest, I'm not sure if this is safe or not (or if
> it was intentional -- since I'm not familiar with mqueue).
>
> To me it looks like there is a missing permission check. I've included a
> patch below that I've compile-tested, and should block the above case.
> Can someone please tell me if I'm missing something? Is this actually
> safe?
>
> [1]: https://github.com/docker/docker/issues/36674
The issue is a lot deeper than a missing permission check. sb->s_user_ns
was is improperly set as well. So in addition to the filesystem being
mounted when it should not be mounted, so things are not allow that should
be.
We are practically to the release of 4.16 and there is no agreement between
Al Viro and myself on what the code should looks like to fix things properly.
So revert the code to what it was before so that we can take our time
and discuss this properly.
Fixes: 36735a6a2b ("mqueue: switch to on-demand creation of internal mount")
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Reported-by: Aleksa Sarai <asarai@suse.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Don't pick fixed hash implementation for NFT_SET_EVAL sets, otherwise
userspace hits EOPNOTSUPP with valid rules using the meter statement,
from Florian Westphal.
2) If you send a batch that flushes the existing ruleset (that contains
a NAT chain) and the new ruleset definition comes with a new NAT
chain, don't bogusly hit EBUSY. Also from Florian.
3) Missing netlink policy attribute validation, from Florian.
4) Detach conntrack template from skbuff if IP_NODEFRAG is set on,
from Paolo Abeni.
5) Cache device names in flowtable object, otherwise we may end up
walking over devices going aways given no rtnl_lock is held.
6) Fix incorrect net_device ingress with ingress hooks.
7) Fix crash when trying to read more data than available in UDP
packets from the nf_socket infrastructure, from Subash.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_header_pointer will copy data into a buffer if data is non linear,
otherwise it will return a pointer in the linear section of the data.
nf_sk_lookup_slow_v{4,6} always copies data of size udphdr but later
accesses memory within the size of tcphdr (th->doff) in case of TCP
packets. This causes a crash when running with KASAN with the following
call stack -
BUG: KASAN: stack-out-of-bounds in xt_socket_lookup_slow_v4+0x524/0x718
net/netfilter/xt_socket.c:178
Read of size 2 at addr ffffffe3d417a87c by task syz-executor/28971
CPU: 2 PID: 28971 Comm: syz-executor Tainted: G B W O 4.9.65+ #1
Call trace:
[<ffffff9467e8d390>] dump_backtrace+0x0/0x428 arch/arm64/kernel/traps.c:76
[<ffffff9467e8d7e0>] show_stack+0x28/0x38 arch/arm64/kernel/traps.c:226
[<ffffff946842d9b8>] __dump_stack lib/dump_stack.c:15 [inline]
[<ffffff946842d9b8>] dump_stack+0xd4/0x124 lib/dump_stack.c:51
[<ffffff946811d4b0>] print_address_description+0x68/0x258 mm/kasan/report.c:248
[<ffffff946811d8c8>] kasan_report_error mm/kasan/report.c:347 [inline]
[<ffffff946811d8c8>] kasan_report.part.2+0x228/0x2f0 mm/kasan/report.c:371
[<ffffff946811df44>] kasan_report+0x5c/0x70 mm/kasan/report.c:372
[<ffffff946811bebc>] check_memory_region_inline mm/kasan/kasan.c:308 [inline]
[<ffffff946811bebc>] __asan_load2+0x84/0x98 mm/kasan/kasan.c:739
[<ffffff94694d6f04>] __tcp_hdrlen include/linux/tcp.h:35 [inline]
[<ffffff94694d6f04>] xt_socket_lookup_slow_v4+0x524/0x718 net/netfilter/xt_socket.c:178
Fix this by copying data into appropriate size headers based on protocol.
Fixes: a583636a83 ("inet: refactor inet[6]_lookup functions to take skb")
Signed-off-by: Tejaswi Tanikella <tejaswit@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
NFP program allocation length is in bytes and NFP program length
is in instructions, fix the comparison of the two.
Fixes: 9314c442d7 ("nfp: bpf: move translation prepare to offload.c")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- One fix to the Renesas SH-PFC driver removing a duplicate clkout pin
which was causing crashes.
- One fix to the Samsung driver for out of bounds exceptions.
-----BEGIN PGP SIGNATURE-----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=1Y8Z
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Two fixes for pin control for v4.16:
- Renesas SH-PFC: remove a duplicate clkout pin which was causing
crashes
- fix Samsung out of bounds exceptions"
* tag 'pinctrl-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: samsung: Validate alias coming from DT
pinctrl: sh-pfc: r8a7795: remove duplicate of CLKOUT pin in pinmux_pins[]
Send nm complaints about broken pipe (when sed exits early) to /dev/null.
All errors should be printed to stderr.
Don't trap on normal exit so the trap can return an error code.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Define vdso_start, vdso_end as array to avoid compile-time analysis error
for the case of built with CONFIG_FORTIFY_SOURCE.
and, since vdso_start, vdso_end are used in vdso.c only,
move extern-declaration from vdso.h to vdso.c.
If kernel is built with CONFIG_FORTIFY_SOURCE,
compile-time error happens at this code.
- if (memcmp(&vdso_start, "177ELF", 4))
The size of "&vdso_start" is recognized as 1 byte, but n is 4,
So that compile-time error is reported.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jinbum Park <jinb.park7@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Without CONFIG_MMU, this results in a build failure:
./arch/arm/include/asm/memory.h:92:23: error: initializer element is not constant
#define VECTORS_BASE vectors_base
arch/arm/mm/dump.c:32:4: note: in expansion of macro 'VECTORS_BASE'
{ VECTORS_BASE, "Vectors" },
arch/arm/mm/dump.c:71:11: error: 'L_PTE_USER' undeclared here (not in a function); did you mean 'VTIME_USER'?
.mask = L_PTE_USER,
^~~~~~~~~~
Obviously the feature only makes sense with an MMU, so let's add the
dependency here.
Fixes: a8e53c151f ("ARM: 8737/1: mm: dump: add checking for writable and executable")
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit 384b38b669 ("ARM: 7873/1: vfp: clear vfp_current_hw_state
for dying cpu") fixed the cpu dying notifier by clearing
vfp_current_hw_state[]. However commit e5b61bafe7 ("arm: Convert VFP
hotplug notifiers to state machine") incorrectly used the original
vfp_force_reload() function in the cpu dying notifier.
Fix it by going back to clearing vfp_current_hw_state[].
Fixes: e5b61bafe7 ("arm: Convert VFP hotplug notifiers to state machine")
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Kohji Okuno <okuno.kohji@jp.panasonic.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
DHCP connectivity issues can currently occur if the following conditions
are met:
1) A DHCP packet from a client to a server
2) This packet has a multicast destination
3) This destination has a matching entry in the translation table
(FF:FF:FF:FF:FF:FF for IPv4, 33:33:00:01:00:02/33:33:00:01:00:03
for IPv6)
4) The orig-node determined by TT for the multicast destination
does not match the orig-node determined by best-gateway-selection
In this case the DHCP packet will be dropped.
The "gateway-out-of-range" check is supposed to only be applied to
unicasted DHCP packets to a specific DHCP server.
In that case dropping the the unicasted frame forces the client to
retry via a broadcasted one, but now directed to the new best
gateway.
A DHCP packet with broadcast/multicast destination is already ensured to
always be delivered to the best gateway. Dropping a multicasted
DHCP packet here will only prevent completing DHCP as there is no
other fallback.
So far, it seems the unicast check was implicitly performed by
expecting the batadv_transtable_search() to return NULL for multicast
destinations. However, a multicast address could have always ended up in
the translation table and in fact is now common.
To fix this potential loss of a DHCP client-to-server packet to a
multicast address this patch adds an explicit multicast destination
check to reliably bail out of the gateway-out-of-range check for such
destinations.
The issue and fix were tested in the following three node setup:
- Line topology, A-B-C
- A: gateway client, DHCP client
- B: gateway server, hop-penalty increased: 30->60, DHCP server
- C: gateway server, code modifications to announce FF:FF:FF:FF:FF:FF
Without this patch, A would never transmit its DHCP Discover packet
due to an always "out-of-range" condition. With this patch,
a full DHCP handshake between A and B was possible again.
Fixes: be7af5cf9c ("batman-adv: refactoring gateway handling code")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
For multicast frames AP isolation is only supposed to be checked on
the receiving nodes and never on the originating one.
Furthermore, the isolation or wifi flag bits should only be intepreted
as such for unicast and never multicast TT entries.
By injecting flags to the multicast TT entry claimed by a single
target node it was verified in tests that this multicast address
becomes unreachable, leading to packet loss.
Omitting the "src" parameter to the batadv_transtable_search() call
successfully skipped the AP isolation check and made the target
reachable again.
Fixes: 1d8ab8d3c1 ("batman-adv: Modified forwarding behaviour for multicast packets")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
take both a + and - sign to get to befor and after the symbol address.
But in actuality, the code does not support the minus. This fixes
that issue, and adds a few more selftests to kprobe events.
-----BEGIN PGP SIGNATURE-----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=SWSP
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull kprobe fixes from Steven Rostedt:
"The documentation for kprobe events says that symbol offets can take
both a + and - sign to get to befor and after the symbol address.
But in actuality, the code does not support the minus. This fixes that
issue, and adds a few more selftests to kprobe events"
* tag 'trace-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
selftests: ftrace: Add a testcase for probepoint
selftests: ftrace: Add a testcase for string type with kprobe_event
selftests: ftrace: Add probe event argument syntax testcase
tracing: probeevent: Fix to support minus offset from symbol
There's nothing IST-worthy about #BP/int3. We don't allow kprobes
in the small handful of places in the kernel that run at CPL0 with
an invalid stack, and 32-bit kernels have used normal interrupt
gates for #BP forever.
Furthermore, we don't allow kprobes in places that have usergs while
in kernel mode, so "paranoid" is also unnecessary.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Deallocate SDMA queues during abnormal process termination and when
queue creation fails after the SDMA allocation.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Program sh_hidden_private_base_vmid correctly in the map-process
PM4 packet.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
