Fix an issue where `devm_regulator_register()` would fail for PSE
controllers that do not support current limit control, such as simple
GPIO-based controllers like the podl-pse-regulator. The
`REGULATOR_CHANGE_CURRENT` flag and `max_uA` constraint are now
conditionally set only if the `pi_set_current_limit` operation is
supported. This change prevents the regulator registration routine from
attempting to call `pse_pi_set_current_limit()`, which would return
`-EOPNOTSUPP` and cause the registration to fail.
Fixes: 4a83abcef5 ("net: pse-pd: Add new power limit get and set c33 features")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Kyle Swenson <kyle.swenson@est.tech>
Link: https://patch.msgid.link/20240813073719.2304633-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
HDMI analyser shows that the AVI infoframe is no being longer send.
The switch to the HDMI connector api should have used the frame content
which is now given in the buffer parameter, but instead still uses the
(now) empty and superfluous packed_frame variable.
Fix it.
Fixes: 65548c8ff0 ("drm/rockchip: inno_hdmi: Switch to HDMI connector")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805110855.274140-2-knaerzche@gmail.com
Commit 94833addfa ("net: thunderx: Unembed netdev structure") had
a go at dynamically allocating the netdev structures for the thunderx_bgx
driver. This change results in my ThunderX box catching fire (to be fair,
it is what it does best).
The issues with this change are that:
- bgx_lmac_enable() is called *after* bgx_acpi_register_phy() and
bgx_init_of_phy(), both expecting netdev to be a valid pointer.
- bgx_init_of_phy() populates the MAC addresses for *all* LMACs
attached to a given BGX instance, and thus needs netdev for each of
them to have been allocated.
There is a few things to be said about how the driver mixes LMAC and
BGX states which leads to this sorry state, but that's beside the point.
To address this, go back to a situation where all netdev structures
are allocated before the driver starts relying on them, and move the
freeing of these structures to driver removal. Someone brave enough
can always go and restructure the driver if they want.
Fixes: 94833addfa ("net: thunderx: Unembed netdev structure")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Breno Leitao <leitao@debian.org>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240812141322.1742918-1-maz@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
CMIS 5.2 standard section 9.4.2 defines four types of firmware update
supported mechanism: None, only LPL, only EPL, both LPL and EPL.
Currently, only LPL (Local Payload) type of write firmware block is
supported. However, if the module supports both LPL and EPL the flashing
process wrongly fails for no supporting LPL.
Fix that, by allowing the write mechanism to be LPL or both LPL and
EPL.
Fixes: c4f78134d4 ("ethtool: cmis_fw_update: add a layer for supporting firmware update using CDB")
Reported-by: Vladyslav Mykhaliuk <vmykhaliuk@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20240812140824.3718826-1-danieller@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After a vsock socket has been added to a BPF sockmap, its prot->recvmsg
has been replaced with vsock_bpf_recvmsg(). Thus the following
recursiion could happen:
vsock_bpf_recvmsg()
-> __vsock_recvmsg()
-> vsock_connectible_recvmsg()
-> prot->recvmsg()
-> vsock_bpf_recvmsg() again
We need to fix it by calling the original ->recvmsg() without any BPF
sockmap logic in __vsock_recvmsg().
Fixes: 634f1a7110 ("vsock: support sockmap")
Reported-by: syzbot+bdb4bd87b5e22058e2a4@syzkaller.appspotmail.com
Tested-by: syzbot+bdb4bd87b5e22058e2a4@syzkaller.appspotmail.com
Cc: Bobby Eshleman <bobby.eshleman@bytedance.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240812022153.86512-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, kasan_init_sw_tags() is called before setup_per_cpu_areas(),
so per_cpu(prng_state, cpu) accesses the same address regardless of the
value of "cpu", and the same seed value gets copied to the percpu area
for every CPU. Fix this by moving the call to smp_prepare_boot_cpu(),
which is the first architecture hook after setup_per_cpu_areas().
Fixes: 3c9e3aa110 ("kasan: add tag related helper functions")
Fixes: 3f41b60938 ("kasan: fix random seed generation for tag-based mode")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20240814091005.969756-1-samuel.holland@sifive.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This reverts commit 68e6939ea9.
Kevin reported that this causes a crash during suspend on platforms that
dont use PM domains.
Link: https://lore.kernel.org/r/7ha5hgpchq.fsf@baylibre.com
Cc: Thomas Richard <thomas.richard@bootlin.com>
Fixes: 68e6939ea9 ("serial: 8250_omap: Set the console genpd always on if no console suspend")
Cc: stable <stable@kernel.org>
Reported-by: Kevin Hilman <khilman@kernel.org>
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Link: https://lore.kernel.org/r/20240814111747.82371-1-griffin@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have few fixes to drivers. The most important here is a fix for iwlwifi which
caused major slowdowns for several users.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAma85fkRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZsh7Af9GN+/ctiQx0/RTJoLn9C14KCT4ti/dkam
ChgzoKIZBXf1YjHr/nicWIKykhiigFEaoiS0Cu6WX8Hd0xXCKBUpGxHemBergx7j
jo3XnTOXLXKOTuUUrFJVTzawBKNEVLHLgMRM8E5i9Vif9sXcKKZeQYFpK5O0/Kkr
ZP1LQTAJpHIdsihwfBesoagQfo23HxwELbbDOduycsgMEFpXM5MYz4BGprOU+bma
pApctAD3wyc9mn5LZhwA9tX5OcM+54nBILe9ftUaMnSyEZHVZemaalUrhZdNYLqr
y4CacQUN1tw2Q9b8OkREfzEUvcjhfcd1Vpg3lLAMHjwIsYDNDPH8Ng==
=ZRLx
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.11
We have few fixes to drivers. The most important here is a fix for
iwlwifi which caused major slowdowns for several users.
* tag 'wireless-2024-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: correctly lookup DMA address in SG table
wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change
wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion
wifi: rtlwifi: rtl8192du: Initialise value32 in _rtl92du_init_queue_reserved_page
wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850
====================
Link: https://patch.msgid.link/20240814171606.E14A0C116B1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change expected_buf from (const void *) to (const char *)
in function __recvpair().
This change fixes the below warnings during test compilation:
```
In file included from msg_oob.c:14:
msg_oob.c: In function ‘__recvpair’:
../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument
of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=]
../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’
msg_oob.c:235:17: note: in expansion of macro ‘TH_LOG’
../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument
of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=]
../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’
msg_oob.c:259:25: note: in expansion of macro ‘TH_LOG’
```
Fixes: d098d77232 ("selftest: af_unix: Add msg_oob.c.")
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240814080743.1156166-1-jain.abhinav177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=din2
-----END PGP SIGNATURE-----
Merge tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- extend tree-checker verification of directory item type
- fix regression in page/folio and extent state tracking in xarray, the
dirty status can get out of sync and can cause problems e.g. a hang
- in send, detect last extent and allow to clone it instead of sending
it as write, reduces amount of data transferred in the stream
- fix checking extent references when cleaning deleted subvolumes
- fix one more case in the extent map shrinker, let it run only in the
kswapd context so it does not cause latency spikes during other
operations
* tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix invalid mapping of extent xarray state
btrfs: send: allow cloning non-aligned extent if it ends at i_size
btrfs: only run the extent map shrinker from kswapd tasks
btrfs: tree-checker: reject BTRFS_FT_UNKNOWN dir type
btrfs: check delayed refs when we're checking if a ref exists
On ACPI machines, the tegra i2c module encounters an issue due to a
mutex being called inside a spinlock. This leads to the following bug:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
...
Call trace:
__might_sleep
__mutex_lock_common
mutex_lock_nested
acpi_subsys_runtime_resume
rpm_resume
tegra_i2c_xfer
The problem arises because during __pm_runtime_resume(), the spinlock
&dev->power.lock is acquired before rpm_resume() is called. Later,
rpm_resume() invokes acpi_subsys_runtime_resume(), which relies on
mutexes, triggering the error.
To address this issue, devices on ACPI are now marked as not IRQ-safe,
considering the dependency of acpi_subsys_runtime_resume() on mutexes.
Fixes: bd2fdedbf2 ("i2c: tegra: Add the ACPI support")
Cc: <stable@vger.kernel.org> # v5.17+
Co-developed-by: Michael van der Westhuizen <rmikey@meta.com>
Signed-off-by: Michael van der Westhuizen <rmikey@meta.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Objects' dump callbacks are not concurrency-safe per-se with reset bit
set. If two CPUs perform a reset at the same time, at least counter and
quota objects suffer from value underrun.
Prevent this by introducing dedicated locking callbacks for nfnetlink
and the asynchronous dump handling to serialize access.
Fixes: 43da04a593 ("netfilter: nf_tables: atomic dump and reset for stateful objects")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Outsource the reply skb preparation for non-dump getrule requests into a
distinct function. Prep work for object reset locking.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In theory, dumpreset may fail and invalidate the preceeding log message.
Fix this and use the occasion to prepare for object reset locking, which
benefits from a few unrelated changes:
* Add an early call to nfnetlink_unicast if not resetting which
effectively skips the audit logging but also unindents it.
* Extract the table's name from the netlink attribute (which is verified
via earlier table lookup) to not rely upon validity of the looked up
table pointer.
* Do not use local variable family, it will vanish.
Fixes: 8e6cf365e1 ("audit: log nftables configuration change events")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Trigger cloned skbs leaving softirq protection.
This triggers splat without the preceeding change
("netfilter: nf_queue: drop packets with cloned unconfirmed
conntracks"):
WARNING: at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm..
because local delivery and forwarding will race for confirmation.
Based on a reproducer script from Yi Chen.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Conntrack assumes an unconfirmed entry (not yet committed to global hash
table) has a refcount of 1 and is not visible to other cores.
With multicast forwarding this assumption breaks down because such
skbs get cloned after being picked up, i.e. ct->use refcount is > 1.
Likewise, bridge netfilter will clone broad/mutlicast frames and
all frames in case they need to be flood-forwarded during learning
phase.
For ip multicast forwarding or plain bridge flood-forward this will
"work" because packets don't leave softirq and are implicitly
serialized.
With nfqueue this no longer holds true, the packets get queued
and can be reinjected in arbitrary ways.
Disable this feature, I see no other solution.
After this patch, nfqueue cannot queue packets except the last
multicast/broadcast packet.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add AFE Control Register 0 to the volatile_register.
AFE_DAC_CON0 can be modified by both the SOF and ALSA drivers.
If this register is read and written in cache mode, the cached value
might not reflect the actual value when the register is modified by
another driver. It can cause playback or capture failures. Therefore,
it is necessary to add AFE_DAC_CON0 to the list of volatile registers.
Signed-off-by: YR Yang <yr.yang@mediatek.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://patch.msgid.link/20240801084326.1472-1-yr.yang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
* Fix failure to start guests with kvm.use_gisa=0
* Panic if (un)share fails to maintain security.
ARM:
* Use kvfree() for the kvmalloc'd nested MMUs array
* Set of fixes to address warnings in W=1 builds
* Make KVM depend on assembler support for ARMv8.4
* Fix for vgic-debug interface for VMs without LPIs
* Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest
* Minor code / comment cleanups for configuring PAuth traps
* Take kvm->arch.config_lock to prevent destruction / initialization
race for a vCPU's CPUIF which may lead to a UAF
x86:
* Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)
* Fix smatch issues
* Small cleanups
* Make x2APIC ID 100% readonly
* Fix typo in uapi constant
Generic:
* Use synchronize_srcu_expedited() on irqfd shutdown
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAma85nQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPq5gf8DVZjs2yNwdPLAUN7AOpElsobFnVN
etJ1V09XsfSYMIAV6ksvC1VBzHpyOJN2QKuF0nfIiISsV8W9xLcV2rKIodsGBvdV
K5ODL/yxeYI27t6Uferra1AGlchtn3tlpZzVarZIgRvZa3NMXaQPYJdcQr2Oybou
7hZsboMTl6jaSl6NELzcBRksfkcOqQLQoUqVBqlkBTM3yyFRmV85BisRkOWCIBfA
9c+kn7ZWBfOqYaXjiLeCrdCKrUuFLfR3ejJibYFan5MULYHIL95W/WJo9uQJ1QBr
BNjMfmtVZ2JOWya40uUSKrvxJ0IErAlMNgmnpjeA4cBqYK5GRHUKvO5jNw==
=A8SH
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"s390:
- Fix failure to start guests with kvm.use_gisa=0
- Panic if (un)share fails to maintain security.
ARM:
- Use kvfree() for the kvmalloc'd nested MMUs array
- Set of fixes to address warnings in W=1 builds
- Make KVM depend on assembler support for ARMv8.4
- Fix for vgic-debug interface for VMs without LPIs
- Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest
- Minor code / comment cleanups for configuring PAuth traps
- Take kvm->arch.config_lock to prevent destruction / initialization
race for a vCPU's CPUIF which may lead to a UAF
x86:
- Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)
- Fix smatch issues
- Small cleanups
- Make x2APIC ID 100% readonly
- Fix typo in uapi constant
Generic:
- Use synchronize_srcu_expedited() on irqfd shutdown"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: SEV: uapi: fix typo in SEV_RET_INVALID_CONFIG
KVM: x86: Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)
KVM: eventfd: Use synchronize_srcu_expedited() on shutdown
KVM: selftests: Add a testcase to verify x2APIC is fully readonly
KVM: x86: Make x2APIC ID 100% readonly
KVM: x86: Use this_cpu_ptr() instead of per_cpu_ptr(smp_processor_id())
KVM: x86: hyper-v: Remove unused inline function kvm_hv_free_pa_page()
KVM: SVM: Fix an error code in sev_gmem_post_populate()
KVM: SVM: Fix uninitialized variable bug
KVM: arm64: vgic: Hold config_lock while tearing down a CPU interface
KVM: selftests: arm64: Correct feature test for S1PIE in get-reg-list
KVM: arm64: Tidying up PAuth code in KVM
KVM: arm64: vgic-debug: Exit the iterator properly w/o LPI
KVM: arm64: Enforce dependency on an ARMv8.4-aware toolchain
s390/uv: Panic for set and remove shared access UVC errors
KVM: s390: fix validity interception issue when gisa is switched off
docs: KVM: Fix register ID of SPSR_FIQ
KVM: arm64: vgic: fix unexpected unlock sparse warnings
KVM: arm64: fix kdoc warnings in W=1 builds
KVM: arm64: fix override-init warnings in W=1 builds
...
In preparation for misaligned vector performance hwprobe keys, rename
the hwprobe key values associated with misaligned scalar accesses to
include the term SCALAR. Leave the old defines in place to maintain
source compatibility.
This change is intended to be a functional no-op.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240809214444.3257596-3-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISCV_HWPROBE_KEY_CPUPERF_0 was mistakenly flagged as a bitmask in
hwprobe_key_is_bitmask(), when in reality it was an enum value. This
causes problems when used in conjunction with RISCV_HWPROBE_WHICH_CPUS,
since SLOW, FAST, and EMULATED have values whose bits overlap with
each other. If the caller asked for the set of CPUs that was SLOW or
EMULATED, the returned set would also include CPUs that were FAST.
Introduce a new hwprobe key, RISCV_HWPROBE_KEY_MISALIGNED_PERF, which
returns the same values in response to a direct query (with no flags),
but is properly handled as an enumerated value. As a result, SLOW,
FAST, and EMULATED are all correctly treated as distinct values under
the new key when queried with the WHICH_CPUS flag.
Leave the old key in place to avoid disturbing applications which may
have already come to rely on the key, with or without its broken
behavior with respect to the WHICH_CPUS flag.
Fixes: e178bf146e ("RISC-V: hwprobe: Introduce which-cpus flag")
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240809214444.3257596-2-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, only acpi_early_node_map[0] was initialized to NUMA_NO_NODE.
To ensure all the values were properly initialized, switch to initialize
all of them to NUMA_NO_NODE.
Fixes: eabd9db64e ("ACPI: RISCV: Add NUMA support based on SRAT and SLIT")
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/0d362a8ae50558b95685da4c821b2ae9e8cf78be.1722828421.git.haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
With XIP kernel, kernel_map.size is set to be only the size of data part of
the kernel. This is inconsistent with "normal" kernel, who sets it to be
the size of the entire kernel.
More importantly, XIP kernel fails to boot if CONFIG_DEBUG_VIRTUAL is
enabled, because there are checks on virtual addresses with the assumption
that kernel_map.size is the size of the entire kernel (these checks are in
arch/riscv/mm/physaddr.c).
Change XIP's kernel_map.size to be the size of the entire kernel.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: <stable@vger.kernel.org> # v6.1+
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240508191917.2892064-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Otherwise when the tracer changes syscall number to -1, the kernel fails
to initialize a0 with -ENOSYS and subsequently fails to return the error
code of the failed syscall to userspace. For example, it will break
strace syscall tampering.
Fixes: 52449c17bd ("riscv: entry: set a0 = -ENOSYS only when syscall != -1")
Reported-by: "Dmitry V. Levin" <ldv@strace.io>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Celeste Liu <CoelacanthusHex@gmail.com>
Link: https://lore.kernel.org/r/20240627142338.5114-2-CoelacanthusHex@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit 264640fc2c ("ipv6: distinguish frag queues by device
for multicast and link-local packets") modified the ipv6 fragment
reassembly logic to distinguish frag queues by device for multicast
and link-local packets but in fact only the main reassembly code
limits the use of the device to those address types and the netfilter
reassembly code uses the device for all packets.
This means that if fragments of a packet arrive on different interfaces
then netfilter will fail to reassemble them and the fragments will be
expired without going any further through the filters.
Fixes: 648700f76b ("inet: frags: use rhashtables for reassembly units")
Signed-off-by: Tom Hughes <tom@compton.nu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Replace IS_ENABLED() with IS_REACHABLE() to substitute empty stubs for:
i2c_acpi_get_i2c_resource()
i2c_acpi_client_count()
i2c_acpi_find_bus_speed()
i2c_acpi_new_device_by_fwnode()
i2c_adapter *i2c_acpi_find_adapter_by_handle()
i2c_acpi_waive_d0_probe()
commit f17c06c660 ("i2c: Fix conditional for substituting empty ACPI
functions") partially fixed this conditional to depend on CONFIG_I2C,
but used IS_ENABLED(), which is wrong since CONFIG_I2C is tristate.
CONFIG_ACPI is boolean but let's also change it to use IS_REACHABLE()
to future-proof it against becoming tristate.
Somehow despite testing various combinations of CONFIG_I2C and CONFIG_ACPI
we missed the combination CONFIG_I2C=m, CONFIG_ACPI=y.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f17c06c660 ("i2c: Fix conditional for substituting empty ACPI functions")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408141333.gYnaitcV-lkp@intel.com/
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The device never comes online from a reset/shutdown state, because the
driver de-asserts reset GPIO when requesting it but then, at the end of
probe() through wcd937x_reset(), leaves it asserted.
Cc: stable@vger.kernel.org
Fixes: 9be3ec196d ("ASoC: codecs: wcd937x: add wcd937x codec driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114913.40022-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
"INVALID" is misspelt in "SEV_RET_INAVLID_CONFIG". Since this is part of
the UAPI, keep the current definition and add a new one with the fix.
Fix-suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Amit Shah <amit.shah@amd.com>
Message-ID: <20240814083113.21622-1-amit@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, only acpi_early_node_map[0] was initialized to NUMA_NO_NODE.
To ensure all the values were properly initialized, switch to initialize
all of them to NUMA_NO_NODE.
Fixes: e189624916 ("arm64: numa: rework ACPI NUMA initialization")
Cc: <stable@vger.kernel.org> # 4.19.x
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/853d7f74aa243f6f5999e203246f0d1ae92d2b61.1722828421.git.haibo1.xu@intel.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In the CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y version of __get_mem_asm(), we
incorrectly use _ASM_EXTABLE_##type##ACCESS_ERR() such that upon a fault
the extable fixup handler writes -EFAULT into "%w0", which is the
register containing 'x' (the result of the load).
This was a thinko in commit:
86a6a68feb ("arm64: start using 'asm goto' for get_user() when available")
Prior to that commit _ASM_EXTABLE_##type##ACCESS_ERR_ZERO() was used
such that the extable fixup handler wrote -EFAULT into "%w0" (the
register containing 'err'), and zero into "%w1" (the register containing
'x'). When the 'err' variable was removed, the extable entry was updated
incorrectly.
Writing -EFAULT to the value register is unnecessary but benign:
* We never want -EFAULT in the value register, and previously this would
have been zeroed in the extable fixup handler.
* In __get_user_error() the value is overwritten with zero explicitly in
the error path.
* The asm goto outputs cannot be used when the goto label is taken, as
older compilers (e.g. clang < 16.0.0) do not guarantee that asm goto
outputs are usable in this path and may use a stale value rather than
the value in an output register. Consequently, zeroing in the extable
fixup handler is insufficient to ensure callers see zero in the error
path.
* The expected usage of unsafe_get_user() and get_kernel_nofault()
requires that the value is not consumed in the error path.
Some versions of GCC would mis-compile asm goto with outputs, and
erroneously omit subsequent assignments, breaking the error path
handling in __get_user_error(). This was discussed at:
https://lore.kernel.org/lkml/ZpfxLrJAOF2YNqCk@J2N7QTR9R3.cambridge.arm.com/
... and was fixed by removing support for asm goto with outputs on those
broken compilers in commit:
f2f6a8e887 ("init/Kconfig: remove CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND")
With that out of the way, we can safely replace the usage of
_ASM_EXTABLE_##type##ACCESS_ERR() with _ASM_EXTABLE_##type##ACCESS(),
leaving the value register unchanged in the case a fault is taken, as
was originally intended. This matches other architectures and matches
our __put_mem_asm().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240807103731.2498893-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Disallow read-only memslots for SEV-{ES,SNP} VM types, as KVM can't
directly emulate instructions for ES/SNP, and instead the guest must
explicitly request emulation. Unless the guest explicitly requests
emulation without accessing memory, ES/SNP relies on KVM creating an MMIO
SPTE, with the subsequent #NPF being reflected into the guest as a #VC.
But for read-only memslots, KVM deliberately doesn't create MMIO SPTEs,
because except for ES/SNP, doing so requires setting reserved bits in the
SPTE, i.e. the SPTE can't be readable while also generating a #VC on
writes. Because KVM never creates MMIO SPTEs and jumps directly to
emulation, the guest never gets a #VC. And since KVM simply resumes the
guest if ES/SNP guests trigger emulation, KVM effectively puts the vCPU
into an infinite #NPF loop if the vCPU attempts to write read-only memory.
Disallow read-only memory for all VMs with protected state, i.e. for
upcoming TDX VMs as well as ES/SNP VMs. For TDX, it's actually possible
to support read-only memory, as TDX uses EPT Violation #VE to reflect the
fault into the guest, e.g. KVM could configure read-only SPTEs with RX
protections and SUPPRESS_VE=0. But there is no strong use case for
supporting read-only memslots on TDX, e.g. the main historical usage is
to emulate option ROMs, but TDX disallows executing from shared memory.
And if someone comes along with a legitimate, strong use case, the
restriction can always be lifted for TDX.
Don't bother trying to retroactively apply the restriction to SEV-ES
VMs that are created as type KVM_X86_DEFAULT_VM. Read-only memslots can't
possibly work for SEV-ES, i.e. disallowing such memslots is really just
means reporting an error to userspace instead of silently hanging vCPUs.
Trying to deal with the ordering between KVM_SEV_INIT and memslot creation
isn't worth the marginal benefit it would provide userspace.
Fixes: 26c44aa9e0 ("KVM: SEV: define VM types for SEV and SEV-ES")
Fixes: 1dfe571c12 ("KVM: SEV: Add initial SEV-SNP support")
Cc: Peter Gonda <pgonda@google.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240809190319.1710470-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=B712
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20240814' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
- Fix a xperms counting problem where we adding to the xperms count
even if we failed to add the xperm.
- Propogate errors from avc_add_xperms_decision() back to the caller so
that we can trigger the proper cleanup and error handling.
- Revert our use of vma_is_initial_heap() in favor of our older logic
as vma_is_initial_heap() doesn't correctly handle the no-heap case
and it is causing issues with the SELinux process/execheap access
control. While the older SELinux logic may not be perfect, it
restores the expected user visible behavior.
Hopefully we will be able to resolve the problem with the
vma_is_initial_heap() macro with the mm folks, but we need to fix
this in the meantime.
* tag 'selinux-pr-20240814' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: revert our use of vma_is_initial_heap()
selinux: add the processing of the failure of avc_add_xperms_decision()
selinux: fix potential counting error in avc_add_xperms_decision()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZrym4AAKCRCRxhvAZXjc
oqT3AP9ydoUNavaZcRayH8r3ybvz9+aJGJ6Q7NznFVCk71vn0gD/buLzmq96Muns
M5DWHbft2AFwK0Rz2nx8j5OXUeHwrQg=
=HZBL
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.11-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"VFS:
- Fix the name of file lease slab cache. When file leases were split
out of file locks the name of the file lock slab cache was used for
the file leases slab cache as well.
- Fix a type in take_fd() helper.
- Fix infinite directory iteration for stable offsets in tmpfs.
- When the icache is pruned all reclaimable inodes are marked with
I_FREEING and other processes that try to lookup such inodes will
block.
But some filesystems like ext4 can trigger lookups in their inode
evict callback causing deadlocks. Ext4 does such lookups if the
ea_inode feature is used whereby a separate inode may be used to
store xattrs.
Introduce I_LRU_ISOLATING which pins the inode while its pages are
reclaimed. This avoids inode deletion during inode_lru_isolate()
avoiding the deadlock and evict is made to wait until
I_LRU_ISOLATING is done.
netfs:
- Fault in smaller chunks for non-large folio mappings for
filesystems that haven't been converted to large folios yet.
- Fix the CONFIG_NETFS_DEBUG config option. The config option was
renamed a short while ago and that introduced two minor issues.
First, it depended on CONFIG_NETFS whereas it wants to depend on
CONFIG_NETFS_SUPPORT. The former doesn't exist, while the latter
does. Second, the documentation for the config option wasn't fixed
up.
- Revert the removal of the PG_private_2 writeback flag as ceph is
using it and fix how that flag is handled in netfs.
- Fix DIO reads on 9p. A program watching a file on a 9p mount
wouldn't see any changes in the size of the file being exported by
the server if the file was changed directly in the source
filesystem. Fix this by attempting to read the full size specified
when a DIO read is requested.
- Fix a NULL pointer dereference bug due to a data race where a
cachefiles cookies was retired even though it was still in use.
Check the cookie's n_accesses counter before discarding it.
nsfs:
- Fix ioctl declaration for NS_GET_MNTNS_ID from _IO() to _IOR() as
the kernel is writing to userspace.
pidfs:
- Prevent the creation of pidfds for kthreads until we have a
use-case for it and we know the semantics we want. It also confuses
userspace why they can get pidfds for kthreads.
squashfs:
- Fix an unitialized value bug reported by KMSAN caused by a
corrupted symbolic link size read from disk. Check that the
symbolic link size is not larger than expected"
* tag 'vfs-6.11-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Squashfs: sanity check symbolic link size
9p: Fix DIO read through netfs
vfs: Don't evict inode under the inode lru traversing context
netfs: Fix handling of USE_PGPRIV2 and WRITE_TO_CACHE flags
netfs, ceph: Revert "netfs: Remove deprecated use of PG_private_2 as a second writeback flag"
file: fix typo in take_fd() comment
pidfd: prevent creation of pidfds for kthreads
netfs: clean up after renaming FSCACHE_DEBUG config
libfs: fix infinite directory reads for offset dir
nsfs: fix ioctl declaration
fs/netfs/fscache_cookie: add missing "n_accesses" check
filelock: fix name of file_lease slab cache
netfs: Fault in smaller chunks for non-large folio mappings
-----BEGIN PGP SIGNATURE-----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=sGTX
-----END PGP SIGNATURE-----
Merge tag 'bpf-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix bpftrace regression from Kyle Huey.
Tracing bpf prog was called with perf_event input arguments causing
bpftrace produce garbage output.
- Fix verifier crash in stacksafe() from Yonghong Song.
Daniel Hodges reported verifier crash when playing with sched-ext.
The stack depth in the known verifier state was larger than stack
depth in being explored state causing out-of-bounds access.
- Fix update of freplace prog in prog_array from Leon Hwang.
freplace prog type wasn't recognized correctly.
* tag 'bpf-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
perf/bpf: Don't call bpf_overflow_handler() for tracing events
selftests/bpf: Add a test to verify previous stacksafe() fix
bpf: Fix a kernel verifier crash in stacksafe()
bpf: Fix updating attached freplace prog in prog_array map
If a file has the S_DAX flag (aka fsdax access mode) set, we cannot
allow users to change the realtime flag unless the datadev and rtdev
both support fsdax access modes. Even if there are no extents allocated
to the file, the setattr thread could be racing with another thread
that has already started down the write code paths.
Fixes: ba23cba9b3 ("fs: allow per-device dax status checking for filesystems")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
In commit 9adf40249e, we changed the behavior of the AIL thread to
set its own task state to KILLABLE whenever the timeout value is
nonzero. Unfortunately, this missed the fact that xfsaild_push will
return 50ms (aka a longish sleep) when we reach the push target or the
AIL becomes empty, so xfsaild goes to sleep for a long period of time in
uninterruptible D state.
This results in artificially high load averages because KILLABLE
processes are UNINTERRUPTIBLE, which contributes to load average even
though the AIL is asleep waiting for someone to interrupt it. It's not
blocked on IOs or anything, but people scrap ps for processes that look
like they're stuck in D state, so restore the previous threshold.
Fixes: 9adf40249e ("xfs: AIL doesn't need manual pushing")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
It turns out that I misunderstood the difference between the attr and
attr2 feature bits. "attr" means that at some point an attr fork was
created somewhere in the filesystem. "attr2" means that inodes have
variable-sized forks, but says nothing about whether or not there
actually /are/ attr forks in the system.
If we have an attr fork, we only need to check that attr is set.
Fixes: 99d9d8d05d ("xfs: scrub inode block mappings")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The data conversion is done rather by a wrong function. We convert to
BE32, not from BE32. Although the end result must be same, this was
complained by the compiler.
Fix the code again and align with another similar function
tas2563_apply_calib() that does already right.
Fixes: 3beddef84d ("ALSA: hda/tas2781: fix wrong calibrated data order")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408141630.DiDUB8Z4-lkp@intel.com/
Link: https://patch.msgid.link/20240814100500.1944-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply the newly introduced macros for reduce the complex expressions
and cast in the quirk table definitions. It results in a significant
code reduction, too.
There should be no functional changes.
Link: https://patch.msgid.link/20240814134844.2726-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many entries in the USB-audio quirk tables have relatively complex
expressions. For improving the readability, introduce a few macros.
Those are applied in the following patch.
Link: https://patch.msgid.link/20240814134844.2726-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 28ab976911.
Sense data can be in either fixed format or descriptor format.
SAT-6 revision 1, "10.4.6 Control mode page", defines the D_SENSE bit:
"The SATL shall support this bit as defined in SPC-5 with the following
exception: if the D_ SENSE bit is set to zero (i.e., fixed format sense
data), then the SATL should return fixed format sense data for ATA
PASS-THROUGH commands."
The libata SATL has always kept D_SENSE set to zero by default. (It is
however possible to change the value using a MODE SELECT SG_IO command.)
Failed ATA PASS-THROUGH commands correctly respected the D_SENSE bit,
however, successful ATA PASS-THROUGH commands incorrectly returned the
sense data in descriptor format (regardless of the D_SENSE bit).
Commit 28ab976911 ("ata: libata-scsi: Honor the D_SENSE bit for
CK_COND=1 and no error") fixed this bug for successful ATA PASS-THROUGH
commands.
However, after commit 28ab976911 ("ata: libata-scsi: Honor the D_SENSE
bit for CK_COND=1 and no error"), there were bug reports that hdparm,
hddtemp, and udisks were no longer working as expected.
These applications incorrectly assume the returned sense data is in
descriptor format, without even looking at the RESPONSE CODE field in the
returned sense data (to see which format the returned sense data is in).
Considering that there will be broken versions of these applications around
roughly forever, we are stuck with being bug compatible with older kernels.
Cc: stable@vger.kernel.org # 4.19+
Reported-by: Stephan Eisvogel <eisvogel@seitics.de>
Reported-by: Christian Heusel <christian@heusel.eu>
Closes: https://lore.kernel.org/linux-ide/0bf3f2f0-0fc6-4ba5-a420-c0874ef82d64@heusel.eu/
Fixes: 28ab976911 ("ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240813131900.1285842-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
This patch is based on the discussions between Neal Cardwell and
Eric Dumazet in the link
https://lore.kernel.org/netdev/20240726204105.1466841-1-quic_subashab@quicinc.com/
It was correctly pointed out that tp->window_clamp would not be
updated in cases where net.ipv4.tcp_moderate_rcvbuf=0 or if
(copied <= tp->rcvq_space.space). While it is expected for most
setups to leave the sysctl enabled, the latter condition may
not end up hitting depending on the TCP receive queue size and
the pattern of arriving data.
The updated check should be hit only on initial MSS update from
TCP_MIN_MSS to measured MSS value and subsequently if there was
an update to a larger value.
Fixes: 05f76b2d63 ("tcp: Adjust clamping window for applications specifying SO_RCVBUF")
Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit a0821ca14b ("media: atomisp: Remove test pattern generator (TPG)
support") broke BYT support because it removed a seemingly unused field
from struct sh_css_sp_config and a seemingly unused value from enum
ia_css_input_mode.
But these are part of the ABI between the kernel and firmware on ISP2400
and this part of the TPG support removal changes broke ISP2400 support.
ISP2401 support was not affected because on ISP2401 only a part of
struct sh_css_sp_config is used.
Restore the removed field and enum value to fix this.
Fixes: a0821ca14b ("media: atomisp: Remove test pattern generator (TPG) support")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This adds another disk accounting counter to track usage per inode
number (any snapshot ID).
This will be used for a couple things:
- It'll give us a way to tell the user how much space a given file ista
consuming in all snapshots; i.e. how much extra space it's consuming
due to snapshot versioning.
- It counts number of extents and total size of extents (both in btree
keyspace sectors and actual disk usage), meaning it gives us average
extent size: that is, it'll let us cheaply find fragmented files that
should be defragmented.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The next patch will be adding a disk accounting counter type which is
not kept in the in-memory eytzinger tree.
As prep, fold __bch2_accounting_mem_mod() into
bch2_accounting_mem_mod_locked() so that we can check for that counter
type and bail out without calling bpos_to_disk_accounting_pos() twice.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bkey_fsck_err() was added as an interface that looks like fsck_err(),
but previously all it did was ensure that the appropriate error counter
was incremented in the superblock.
This is a cleanup and bugfix patch that converts it to a wrapper around
fsck_err(). This is needed to fix an issue with the upgrade path to
disk_accounting_v3, where the "silent fix" error list now includes
bkey_fsck errors; fsck_err() handles this in a unified way, and since we
need to change printing of bkey fsck errors from the caller to the inner
bkey_fsck_err() calls, this ends up being a pretty big change.
Als,, rename .invalid() methods to .validate(), for clarity, while we're
changing the function signature anyways (to drop the printbuf argument).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
