Add flags indicating the pixel encoding - yuv/rgb/hsv to
fwht header and to the pixel info. Use it to enumerate
the supported pixel formats.
Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use 3 bits for the number of components mask in the fwht
header flags
Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for the selection api for the crop and compose targets.
The driver rounds up the coded width and height such that
all planes dimensions are multiple of 8.
Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add the field 'num_planes' to 'v4l2_fwht_pixfmt_info' struct.
Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The "Codec Interface" chapter is poorly named since codecs are just one
use-case of the Memory-to-Memory Interface. Rename it and clean up the
text a bit.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The teletext interface has been dead for years now, just
remove it.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
We never had an effect interface, and if you want to do such
things you use the mem2mem interface instead.
Just drop this from the spec.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fix the outdated irq example code. It is under an #ifdef TODO
so it is never actually compiled and this code was never compiled.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The zero timestamp is really valid so fix that mistake by
dropping the code which checks for zero timestamp.
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This corrects clock frequency table rates to be in sync
with video clock controller frequency table.
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
By historical reasons we defined firmware memory size to be 6MB even
that the firmware size for all supported Venus versions is 5MBs. Correct
that by compare the required firmware size returned from mdt loader and
the one provided by DT reserved memory region. We proceed further if the
required firmware size is smaller than provided by DT memory region.
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Set initial try format with default configuration instead of current one.
Fixes: 8d3b307a15 ("media: ov2640: make VIDIOC_SUBDEV_G_FMT ioctl work with V4L2_SUBDEV_FORMAT_TRY")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This function prints an error message on success. I don't have the
hardware, I just noticed this while reading the code.
Fixes: 8b99312b72 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This driver sets initial frame width and height to 0x0, which is invalid.
So set it to selection rectangle bounds instead.
This is detected by v4l2-compliance detected.
Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This driver doesn't set all members of mbus format field when the
VIDIOC_SUBDEV_{S,G}_FMT ioctls are called.
This is detected by v4l2-compliance.
Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The VIDIOC_SUBDEV_G_FMT ioctl for this driver doesn't recognize
V4L2_SUBDEV_FORMAT_TRY and always works as if V4L2_SUBDEV_FORMAT_ACTIVE
is specified.
Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This driver doesn't set all members of mbus format field when the
VIDIOC_SUBDEV_{S,G}_FMT ioctls are called.
This is detected by v4l2-compliance.
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The VIDIOC_SUBDEV_G_FMT ioctl for this driver doesn't recognize
V4L2_SUBDEV_FORMAT_TRY and always works as if V4L2_SUBDEV_FORMAT_ACTIVE
is specified.
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Register a sub-device to the asynchronous subdevice framework, and also
create subdevice device node.
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Create a source pad and set the media controller type to the sensor.
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Remove remaining soc_camera specific code and drop soc_camera dependency
from this driver.
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Switch s_power() callback to runtime PM framework. This also removes
soc_camera specific power management code and introduces reset and standby
gpios instead.
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Introduce multi_reg_write() to write multiple registers to the device and
use it where possible.
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Replace GPL license statements with SPDX license identifiers (GPL-2.0).
This also fixes MODULE_LICENSE() ident to match the actual license text.
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Copy the soc_camera based driver in v4l2 sensor driver directory.
This commit just copies the original file without modifying it.
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
We use put_unaligned_be16() to be simplified for setting register address
in ov8856_read_reg() and use sizeof() to be better suited for bytes
copying.
Signed-off-by: Ben Kao <ben.kao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This provides more power saving when the sensor is off.
While at that, do the delay on power/clock enable even if the sensor driver
itself doesn't control the GPIOs. This is required for the OLPC XO-1
platform, that lacks the proper power/reset properties in its DT, but
needs the delay after the sensor is clocked up.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The commit 71862f63f3 ("media: ov7670: Add the ov7670_s_power function")
added a power control routing. However, it was not good enough to use as
a s_power() callback: it merely flipped on the power GPIOs without
restoring the register settings.
Fix this now and register an actual power callback.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This will allow us to restore the last set frame rate after the device
returns from a power off.
[sakari.ailus@linux.intel.com>: Wrap a line over 80 characters]
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This will allow us to restore the last set format after the device returns
from a power off.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Instead of assigning the return value to ret and then checking and
returning it, just return the value to the caller directly. The success
value is always 0.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch adds driver for Omnivision's ov8856 sensor,
the driver supports following features:
- manual exposure/gain(analog and digital) control support
- two link frequencies
- VBLANK/HBLANK support
- test pattern support
- media controller support
- runtime PM support
- enable Vsync signal output
- supported resolutions
+ 3280x2464 at 30FPS
+ 1640x1232 at 30FPS
Signed-off-by: Ben Kao <ben.kao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
imx274_read_reg() is not used since commit ca017467c7 ("media:
imx274: add helper to read multibyte registers").
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Some imx platforms do not have fwnode connections to all CSI input
ports, and should not be treated as an error. This includes the
imx6q SabreAuto, which has no connections to ipu1_csi1 and ipu2_csi0.
Return -ENOTCONN in imx_csi_parse_endpoint() so that v4l2-fwnode
endpoint parsing will not treat an unconnected CSI input port as
an error.
Fixes: c893500a16 ("media: imx: csi: Register a subdev notifier")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Cc: stable@vger.kernel.org
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Implement the vidioc_(un)subscribe_event operations. Imx will allow
subscribing to the imx-specific frame interval error events, events
from subdevices (V4L2_EVENT_SOURCE_CHANGE), and control events.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In order to receive events generated by subdevices on the video capture
nodes, those events need to be forwarded to the subdevice's list of
reachable video capture devices.
Note this will queue the event to a video device even if there is
no actual _enabled_ media path from the sub-device to the video device.
So a future improvement is to skip the video device if there is no enabled
path to it from the sub-device. The entity->pipe pointer can't be
used for this check because in imx-media a sub-device can be a
member to more than one streaming pipeline at a time.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The CSI, PRP ENC, and PRP VF subdevices shouldn't have to care about
IDMAC line start address alignment. With compose rectangle support in
the capture driver, they don't have to anymore.
If the direct CSI -> IC path is enabled, the CSI output width must
still be aligned to 8 pixels (IC burst length).
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Prepare for mbus format being smaller than the written rectangle
due to burst size.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Allowing to compose captured images into larger memory buffers
will let us lift alignment restrictions on CSI crop width.
For now all compose rectangles are identical to the complete
frame width / height. This will be changed in the next patches.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
It is not correct to calculate decoder capture payload dynamically from
the decoded frame width and height reported by the firmware. These tell
us what the decoder wrote into the internal framebuffers. The rotator or
VDOA always write the full sizeimage when copying the previously decoded
frame from the internal framebuffers into the capture queue.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Coda7541 and earlier do not support macroblock tiling. They do support
the NV12 format, though. Enable macroblock tiling for NV12 only on
CODA960. This fixes crashes when trying to use NV12 support on CodaHx4.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This code is commented since version 3.7. If there is no plan to
use it in future, we can remove this dead code.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This was never implemented, so do not document this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The driver name as returned in v4l2_capabilities must be vimc, not vimc_capture.
Fix this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Switch to devm_kzalloc() when allocating the adv748x device struct.
The sizeof() is updated to determine the correct allocation size from
the dereferenced pointer type rather than hardcoding the struct type.
[Kieran: Change sizeof() to dereference the pointer type]
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
