Reintroduce the __kvm_nvhe_ symbols in kallsyms, ignoring the local
symbols in this namespace. The local symbols are not informative and
can cause aliasing issues when symbolizing the addresses.
With the necessary symbols now in kallsyms we can symbolize nVHE
addresses using the %p print format specifier:
[ 98.916444][ T426] kvm [426]: nVHE hyp panic at: [<ffffffc0096156fc>] __kvm_nvhe_overflow_stack+0x8/0x34!
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220420214317.3303360-7-kaleshsingh@google.com
The llvm compiler can generate lots of local labels ('.LBB', '.Ltmpxxx',
'.L__unnamed_xx', etc.). These symbols usually are useless for debugging.
And they might overlap with handwritten symbols.
Before this change, a dumpstack shows a local symbol for epc:
[ 0.040341][ T0] Hardware name: riscv-virtio,qemu (DT)
[ 0.040376][ T0] epc : .LBB6_14+0x22/0x6a
[ 0.040452][ T0] ra : restore_all+0x12/0x6e
The simple solution is that we can ignore all local labels prefixed by '.L'.
For handwritten symbols which need to be preserved should drop the '.L'
prefix.
After this change, the C defined symbol is shown so we can locate the
problematical code immediately:
[ 0.035795][ T0] Hardware name: riscv-virtio,qemu (DT)
[ 0.036332][ T0] epc : trace_hardirqs_on+0x54/0x13c
[ 0.036567][ T0] ra : restore_all+0x12/0x6e
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
ARM randconfig builds with lld sometimes show a build failure
from kallsyms:
Inconsistent kallsyms data
Try make KALLSYMS_EXTRA_PASS=1 as a workaround
The problem is the veneers/thunks getting added by the linker extend
the symbol table, which in turn leads to more veneers being needed,
so it may take a few extra iterations to converge.
This bug has been fixed multiple times before, but comes back every time
a new symbol name is used. lld uses a different set of identifiers from
ld.bfd, so the additional ones need to be added as well.
I looked through the sources and found that arm64 and mips define similar
prefixes, so I'm adding those as well, aside from the ones I observed. I'm
not sure about powerpc64, which seems to already be handled through a
section match, but if it comes back, the "__long_branch_" and "__plt_"
prefixes would have to get added as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
PowerPC allmodconfig often fails to build as follows:
LD .tmp_vmlinux.kallsyms1
KSYM .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
KSYM .tmp_vmlinux.kallsyms2.o
LD .tmp_vmlinux.kallsyms3
KSYM .tmp_vmlinux.kallsyms3.o
LD vmlinux
SORTTAB vmlinux
SYSMAP System.map
Inconsistent kallsyms data
Try make KALLSYMS_EXTRA_PASS=1 as a workaround
make[2]: *** [../Makefile:1162: vmlinux] Error 1
Setting KALLSYMS_EXTRA_PASS=1 does not help.
This is caused by the compiler inserting stubs such as *.long_branch.*
and *.plt_branch.*
$ powerpc-linux-nm -n .tmp_vmlinux.kallsyms2
[ snip ]
c00000000210c010 t 00000075.plt_branch.da9:19
c00000000210c020 t 00000075.plt_branch.1677:5
c00000000210c030 t 00000075.long_branch.memmove
c00000000210c034 t 00000075.plt_branch.9e0:5
c00000000210c044 t 00000075.plt_branch.free_initrd_mem
...
Actually, the problem mentioned in scripts/link-vmlinux.sh comments;
"In theory it's possible this results in even more stubs, but unlikely"
is happening here, and ends up with another kallsyms step required.
scripts/kallsyms.c already ignores various compiler stubs. Let's do
similar to make kallsysms for PowerPC always succeed in 2 steps.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Add new folders arch/arm64/kvm/hyp/{vhe,nvhe} and Makefiles for building code
that runs in EL2 under VHE/nVHE KVM, repsectivelly. Add an include folder for
hyp-specific header files which will include code common to VHE/nVHE.
Build nVHE code with -D__KVM_NVHE_HYPERVISOR__, VHE code with
-D__KVM_VHE_HYPERVISOR__.
Under nVHE compile each source file into a `.hyp.tmp.o` object first, then
prefix all its symbols with "__kvm_nvhe_" using `objcopy` and produce
a `.hyp.o`. Suffixes were chosen so that it would be possible for VHE and nVHE
to share some source files, but compiled with different CFLAGS.
The nVHE ELF symbol prefix is added to kallsyms.c as ignored. EL2-only symbols
will never appear in EL1 stack traces.
Due to symbol prefixing, add a section in image-vars.h for aliases of symbols
that are defined in nVHE EL2 and accessed by kernel in EL1 or vice versa.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-4-dbrazdil@google.com
Due to a bug-report that was compiler-dependent, I updated one of my
machines to gcc-10. That shows a lot of new warnings. Happily they
seem to be mostly the valid kind, but it's going to cause a round of
churn for getting rid of them..
This is the really low-hanging fruit of removing a couple of zero-sized
arrays in some core code. We have had a round of these patches before,
and we'll have many more coming, and there is nothing special about
these except that they were particularly trivial, and triggered more
warnings than most.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is the code in the read_symbol function in 'scripts/kallsyms.c':
if (is_ignored_symbol(name, type))
return NULL;
/* Ignore most absolute/undefined (?) symbols. */
if (strcmp(name, "_text") == 0)
_text = addr;
But the is_ignored_symbol function returns true for name="_text" and
type='A'. So the next condition is not executed and the _text variable
is always zero.
It makes the wrong kallsyms_relative_base symbol as a result of the code
(CONFIG_KALLSYMS_BASE_RELATIVE is defined):
if (base_relative) {
output_label("kallsyms_relative_base");
output_address(relative_base);
printf("\n");
}
Because the output_address function uses the _text variable.
So the kallsyms_lookup function and all related functions in the kernel
do not work properly. For example, the stack trace in oops:
Call Trace:
[aa095e58] [809feab8] kobj_ns_ops_tbl+0x7ff09ac8/0x7ff1c1c4 (unreliable)
[aa095e98] [80002b64] kobj_ns_ops_tbl+0x7f50db74/0x80000010
[aa095ef8] [809c3d24] kobj_ns_ops_tbl+0x7feced34/0x7ff1c1c4
[aa095f28] [80002ed0] kobj_ns_ops_tbl+0x7f50dee0/0x80000010
[aa095f38] [8000f238] kobj_ns_ops_tbl+0x7f51a248/0x80000010
The right stack trace:
Call Trace:
[aa095e58] [809feab8] module_vdu_video_init+0x2fc/0x3bc (unreliable)
[aa095e98] [80002b64] do_one_initcall+0x40/0x1f0
[aa095ef8] [809c3d24] kernel_init_freeable+0x164/0x1d8
[aa095f28] [80002ed0] kernel_init+0x14/0x124
[aa095f38] [8000f238] ret_from_kernel_thread+0x14/0x1c
[masahiroy@kernel.org:
This issue happens on binutils <= 2.22
The following commit fixed it:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d2667025dd30611514810c28bee9709e4623012a
The symbol type of _text is 'T' on binutils >= 2.23
The minimal supported binutils version for the kernel build is 2.21
]
Signed-off-by: Mikhail Petrov <Mikhail.Petrov@mir.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
memcpy() writes one more byte than allocated.
Fixes: 8d60526999 ("scripts/kallsyms: change table to store (strcut sym_entry *)")
Reported-by: youling257 <youling257@gmail.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
The symbol table is extended every 10000 addition by using realloc(),
where data copy might occur to the new buffer.
To decrease the amount of possible data copy, let's change the table
to store the pointer.
The symbol type + symbol name part is appended at the end of
(struct sym_entry), and allocated together with the struct body.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
I will use 'sym' for the point to struce sym_entry in the next commit.
Rename 'sym', 'stype' to 'name', 'type', which are more intuitive.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit 5e5c4fa787 ("scripts/kallsyms: shrink table before
sorting it"), kallsyms_relative_base can be larger than _text, which
causes overflow when building the 32-bit kernel.
https://lkml.org/lkml/2019/12/7/156
This is because _text is, unless --all-symbols is specified, now
trimmed from the symbol table before record_relative_base() is called.
Handle the offset signedness also for kallsyms_relative_base. Introduce
a new helper, output_address(), to reduce the code duplication.
Fixes: 5e5c4fa787 ("scripts/kallsyms: shrink table before sorting it")
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Unless the address range matters, symbols can be ignored earlier,
which avoids unneeded memory allocation.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The callers of this function expect (unsigned char *). I do not see
a good reason to make this function return (void *).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
You can do equivalent things with strspn(). I do not see noticeable
performance difference.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
sym_entry::sym is (unsigned char *) instead of (char *) because
kallsyms exploits the MSB for compression, and the characters are
used as the index of token_profit array.
However, it requires casting (unsigned char *) to (char *) in some
places since standard library functions such as strcmp(), strlen()
expect (char *).
Introduce a new helper, sym_name(), which advances the given pointer
by 1 and casts it to (char *).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit 6f00df24ee ("[PATCH] Strip local symbols from kallsyms"),
all symbols starting '$' are ignored.
is_arm_mapping_symbol() particularly ignores $a, $t, etc. but it is
redundant.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, record_relative_base() iterates over the entire table to
find the minimum address, but it is not efficient because we sort
the table anyway.
After sort_symbol(), the table is sorted by address. (kallsyms parses
the 'nm -n' output, so the data is already sorted by address, but this
commit does not rely on it.)
Move record_relative_base() after sort_symbols(), and take the first
non-absolute symbol value.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, build_initial_tok_table() trims unused symbols, but it is
called after sort_symbols().
It is not efficient to sort the huge table that contains unused entries.
Shrink the table before sorting it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
build_initial_tok_table() overwrites unused sym_entry to shrink the
table size. Before the entry is overwritten, table[i].sym must be freed
since it is malloc'ed data.
This fixes the 'definitely lost' report from valgrind. I ran valgrind
against x86_64_defconfig of v5.4-rc8 kernel, and here is the summary:
[Before the fix]
LEAK SUMMARY:
definitely lost: 53,184 bytes in 2,874 blocks
[After the fix]
LEAK SUMMARY:
definitely lost: 0 bytes in 0 blocks
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
gcc asan instrumentation emits the following sequence to store frame pc
when the kernel is built with CONFIG_RELOCATABLE:
debug/vsprintf.s:
.section .data.rel.ro.local,"aw"
.align 8
.LC3:
.quad .LASANPC4826@GOTOFF
.text
.align 8
.type number, @function
number:
.LASANPC4826:
and in case reloc is issued for LASANPC label it also gets into .symtab
with the same address as actual function symbol:
$ nm -n vmlinux | grep 0000000001397150
0000000001397150 t .LASANPC4826
0000000001397150 t number
In the end kernel backtraces are almost unreadable:
[ 143.748476] Call Trace:
[ 143.748484] ([<000000002da3e62c>] .LASANPC2671+0x114/0x190)
[ 143.748492] [<000000002eca1a58>] .LASANPC2612+0x110/0x160
[ 143.748502] [<000000002de9d830>] print_address_description+0x80/0x3b0
[ 143.748511] [<000000002de9dd64>] __kasan_report+0x15c/0x1c8
[ 143.748521] [<000000002ecb56d4>] strrchr+0x34/0x60
[ 143.748534] [<000003ff800a9a40>] kasan_strings+0xb0/0x148 [test_kasan]
[ 143.748547] [<000003ff800a9bba>] kmalloc_tests_init+0xe2/0x528 [test_kasan]
[ 143.748555] [<000000002da2117c>] .LASANPC4069+0x354/0x748
[ 143.748563] [<000000002dbfbb16>] do_init_module+0x136/0x3b0
[ 143.748571] [<000000002dbff3f4>] .LASANPC3191+0x2164/0x25d0
[ 143.748580] [<000000002dbffc4c>] .LASANPC3196+0x184/0x1b8
[ 143.748587] [<000000002ecdf2ec>] system_call+0xd8/0x2d8
Since LASANPC labels are not even unique and get into .symtab only due
to relocs filter them out in kallsyms.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module build
- allow to add optional flags to dpkg-buildpackage when building deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJcgxYUAAoJED2LAQed4NsGr7YQAJq4LmN/aZDI9Mt0YAQjEyyA
PCpm8J2HI9HO1sMoY7J/ksWmV0BU25G+uspKD7dXAQo3l9fmahQM5e4dsyZ4Xqs8
DyyYSGtJJnMJaWmupIZNA4UKDCVtwPoVW8YeuK9rwADVokCux9avogof9O1OoA/E
Pylo+I4UCM82kbpZSd+UxnCx6B0v8XGtW+d31Q4yZXCkw5nw14chrlaprcqB3UgB
+7C3xOnDWCi7gyxaTqmD7dLay2DM8KCDlznEvBL733Y/cK3to1fywzEPzp0JQCLX
BLgmmpW13NF++q5BCoTW6sFjZAhBVbiYZwesMrCi75Y32T8zt4G5l4pkvGkSuGF/
UQh5aoCxaMIp70VPj/loZ0lh78nwVGTok9zRb0rfztM0X4DbmiPi5MNiHRzRpIeE
1jjEa/GK1t0TDnXc/MuDFK8cWwdhttIqUL5yWfAxjXbtP27eLtsopQUdW7EPHs7d
sMnfuSUuhOC28yByVxIkBcwawLyYrcWRphJ3ixCO70CoJWt2DT6aOKxcFJefoJix
Pto6Oo3oQ4iypMM5M9/0Uo+AK2TKRejWIqtZdbo+ir70tNxVH3WDZq++fG0drXOB
r2I/GY6nRjuzLOe2jzEqywFTFd2xpk4Qo84LGb1R3U6aU5qS2gA0W/q00JS5c2qU
R8uReJ7bvmLmrVNZ/NI4
=y9YG
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module
build
- allow to add optional flags to dpkg-buildpackage when building
deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
* tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: remove scripts/basic/% build target
kbuild: use -Werror=implicit-... instead of -Werror-implicit-...
kbuild: clean up scripts/gcc-version.sh
kbuild: remove cc-version macro
kbuild: update comment block of scripts/clang-version.sh
kbuild: remove commented-out INITRD_COMPRESS
kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig
kbuild: [bin]deb-pkg: add DPKG_FLAGS variable
kbuild: move ".config not found!" message from Kconfig to Makefile
kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
kbuild: simplify single target rules
kbuild: remove empty rules for makefiles
kbuild: make -r/-R effective in top Makefile for old Make versions
kbuild: move tools_silent to a more relevant place
kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig
kbuild: refactor cc-cross-prefix implementation
kbuild: hardcode genksyms path and remove GENKSYMS variable
scripts/gdb: refactor rules for symlink creation
kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target
scripts/gdb: do not descend into scripts/gdb from scripts
...
Fix the following sparse warnings:
scripts/kallsyms.c:65:5: warning: symbol 'token_profit' was not declared. Should it be static?
scripts/kallsyms.c:68:15: warning: symbol 'best_table' was not declared. Should it be static?
scripts/kallsyms.c:69:15: warning: symbol 'best_table_len' was not declared. Should it be static?
Also, remove 'inline' from is_arm_mapping_symbol(). The compiler
will inline it anyway when it is appropriate to do so.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As mentioned in the info pages of gas, the '.align' pseudo op's
interpretation of the alignment value is architecture specific.
It might either be a byte value or taken to the power of two.
On ARM it's actually the latter which leads to unnecessary large
alignments of 16 bytes for 32 bit builds or 256 bytes for 64 bit
builds.
Fix this by switching to '.balign' instead which is consistent
across all architectures.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
These symbols were added by commit 028f042613 ("kallsyms: support
kernel symbols in Blackfin on-chip memory") for Blackfin.
The Blackfin support was removed by commit 4ba66a9760 ("arch: remove
blackfin port").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Both kallsyms_num_syms and kallsyms_markers[] don't really need to use
unsigned long as their (base) types; unsigned int fully suffices.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
scripts/kallsyms.c: function write_src:
"printf", the #1 format specifier "d" need arg type "int",
but the according arg "table_cnt" has type "unsigned int"
scripts/recordmcount.c: function do_file:
"fprintf", the #1 format specifier "d" need arg type "int",
but the according arg "(*w2)(ehdr->e_machine)" has type "unsigned int"
scripts/recordmcount.h: function find_secsym_ndx:
"fprintf", the #1 format specifier "d" need arg type "int",
but the according arg "txtndx" has type "unsigned int"
Signed-off-by: nixiaoming <nixiaoming@huawei.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a9760 ("arch: remove blackfin port"),
commit bb6fb6dfcc ("metag: Remove arch/metag/"), respectively.
No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX,
hence the --symbol-prefix option is unnecessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Nothing particularly stands out here, probably because people were tied
up with spectre/meltdown stuff last time around. Still, the main pieces
are:
- Rework of our CPU features framework so that we can whitelist CPUs that
don't require kpti even in a heterogeneous system
- Support for the IDC/DIC architecture extensions, which allow us to elide
instruction and data cache maintenance when writing out instructions
- Removal of the large memory model which resulted in suboptimal codegen
by the compiler and increased the use of literal pools, which could
potentially be used as ROP gadgets since they are mapped as executable
- Rework of forced signal delivery so that the siginfo_t is well-formed
and handling of show_unhandled_signals is consolidated and made
consistent between different fault types
- More siginfo cleanup based on the initial patches from Eric Biederman
- Workaround for Cortex-A55 erratum #1024718
- Some small ACPI IORT updates and cleanups from Lorenzo Pieralisi
- Misc cleanups and non-critical fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJaw1TCAAoJELescNyEwWM0gyQIAJVMK4QveBW+LwF96NYdZo16
p90Aa+nqKelh/s93govQArDMv1gxyuXdFlQZVOGPQHfqpz6RhJWmBA2tFsUbQrUc
OBcioPrRihqTmKBe+1r1XORwZxkVX6GGmCn0LYpPR7I3TjxXZpvxqaxGxiUvHkci
yVxWlDTyN/7eL3akhCpCDagN3Fxwk3QnJLqE3fxOFMlY7NvQcmUxcITiUl/s469q
xK6SWH9SRH1JK8jTHPitwUBiU//3FfCqSI9HLEdDIDoTuPcVM8UetWvi4QzrzJL1
UYg8lmU0CXNmflDzZJDaMf+qFApOrGxR0YVPpBzlQvxe0JIY69g48f+JzDPz8nc=
=+gNa
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Nothing particularly stands out here, probably because people were
tied up with spectre/meltdown stuff last time around. Still, the main
pieces are:
- Rework of our CPU features framework so that we can whitelist CPUs
that don't require kpti even in a heterogeneous system
- Support for the IDC/DIC architecture extensions, which allow us to
elide instruction and data cache maintenance when writing out
instructions
- Removal of the large memory model which resulted in suboptimal
codegen by the compiler and increased the use of literal pools,
which could potentially be used as ROP gadgets since they are
mapped as executable
- Rework of forced signal delivery so that the siginfo_t is
well-formed and handling of show_unhandled_signals is consolidated
and made consistent between different fault types
- More siginfo cleanup based on the initial patches from Eric
Biederman
- Workaround for Cortex-A55 erratum #1024718
- Some small ACPI IORT updates and cleanups from Lorenzo Pieralisi
- Misc cleanups and non-critical fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (70 commits)
arm64: uaccess: Fix omissions from usercopy whitelist
arm64: fpsimd: Split cpu field out from struct fpsimd_state
arm64: tlbflush: avoid writing RES0 bits
arm64: cmpxchg: Include linux/compiler.h in asm/cmpxchg.h
arm64: move percpu cmpxchg implementation from cmpxchg.h to percpu.h
arm64: cmpxchg: Include build_bug.h instead of bug.h for BUILD_BUG
arm64: lse: Include compiler_types.h and export.h for out-of-line LL/SC
arm64: fpsimd: include <linux/init.h> in fpsimd.h
drivers/perf: arm_pmu_platform: do not warn about affinity on uniprocessor
perf: arm_spe: include linux/vmalloc.h for vmap()
Revert "arm64: Revert L1_CACHE_SHIFT back to 6 (64-byte cache line size)"
arm64: cpufeature: Avoid warnings due to unused symbols
arm64: Add work around for Arm Cortex-A55 Erratum 1024718
arm64: Delay enabling hardware DBM feature
arm64: Add MIDR encoding for Arm Cortex-A55 and Cortex-A35
arm64: capabilities: Handle shared entries
arm64: capabilities: Add support for checks based on a list of MIDRs
arm64: Add helpers for checking CPU MIDR against a range
arm64: capabilities: Clean up midr range helpers
arm64: capabilities: Change scope of VHE to Boot CPU feature
...
On arm64, the EFI stub and the kernel proper are essentially the same
binary, although the EFI stub executes at a different virtual address
as the kernel. For this reason, the EFI stub is restricted in the
symbols it can link to, which is ensured by prefixing all EFI stub
symbols with __efistub_ (and emitting __efistub_ prefixed aliases for
routines that may be shared between the core kernel and the stub)
These symbols are leaking into kallsyms, polluting the namespace, so
let's filter them explicitly.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
gcc on aarch64 may emit synbols of type 'n' if the kernel is built with
'-frecord-gcc-switches'. In most cases, those symbols are reported with
nm as
000000000000000e n $d
and with objdump as
0000000000000000 l d .GCC.command.line 0000000000000000 .GCC.command.line
000000000000000e l .GCC.command.line 0000000000000000 $d
Those symbols are detected in is_arm_mapping_symbol() and ignored.
However, if "--prefix-symbols=<prefix>" is configured as well, the
situation is different. For example, in efi/libstub, arm64 images are
built with
'--prefix-alloc-sections=.init --prefix-symbols=__efistub_'.
In combination with '-frecord-gcc-switches', the symbols are now reported
by nm as:
000000000000000e n __efistub_$d
and by objdump as:
0000000000000000 l d .GCC.command.line 0000000000000000 .GCC.command.line
000000000000000e l .GCC.command.line 0000000000000000 __efistub_$d
Those symbols are no longer ignored and included in the base address
calculation. This results in a base address of 000000000000000e, which
in turn causes kallsyms to abort with
kallsyms failure:
relative symbol value 0xffffff900800a000 out of range in relative mode
The problem is seen in little endian arm64 builds with CONFIG_EFI
enabled and with '-frecord-gcc-switches' set in KCFLAGS.
Explicitly ignore symbols of type 'n' since those are clearly debug
symbols.
Link: http://lkml.kernel.org/r/1507136063-3139-1-git-send-email-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This add the kbuild infrastructure that will allow architectures to emit
vmlinux symbol CRCs as 32-bit offsets to another location in the kernel
where the actual value is stored. This works around problems with CRCs
being mistaken for relocatable symbols on kernels that self relocate at
runtime (i.e., powerpc with CONFIG_RELOCATABLE=y)
For the kbuild side of things, this comes down to the following:
- introducing a Kconfig symbol MODULE_REL_CRCS
- adding a -R switch to genksyms to instruct it to emit the CRC symbols
as references into the .rodata section
- making modpost distinguish such references from absolute CRC symbols
by the section index (SHN_ABS)
- making kallsyms disregard non-absolute symbols with a __crc_ prefix
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The implementation of the --page-offset kallsyms command line option has
been removed, so remove it from the usage string as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
The --page-offset command line option was only used for ARM, to filter
symbol addresses below CONFIG_PAGE_OFFSET. This is no longer needed, so
remove the functionality altogether.
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
On ARM, the linker may emit veneers to deal with relative branch
instructions that appear too far away from their targets. Since the
second kallsyms pass results in an increase of the kernel size, it may
result in additional veneers to be emitted, potentially affecting the
output of kallsyms itself if these symbols are visible to it, and for
that reason, symbols whose names end in '_veneer' are ignored explicitly.
However, when building Thumb2 kernels, such veneers are named differently
if they also incur a mode switch, and since they are not filtered by
kallsyms, they may cause the build to fail. So filter symbols whose names
end in '_from_arm' or '_from_thumb' as well.
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Similar to how relative extables are implemented, it is possible to emit
the kallsyms table in such a way that it contains offsets relative to
some anchor point in the kernel image rather than absolute addresses.
On 64-bit architectures, it cuts the size of the kallsyms address table
in half, since offsets between kernel symbols can typically be expressed
in 32 bits. This saves several hundreds of kilobytes of permanent
.rodata on average. In addition, the kallsyms address table is no
longer subject to dynamic relocation when CONFIG_RELOCATABLE is in
effect, so the relocation work done after decompression now doesn't have
to do relocation updates for all these values. This saves up to 24
bytes (i.e., the size of a ELF64 RELA relocation table entry) per value,
which easily adds up to a couple of megabytes of uncompressed __init
data on ppc64 or arm64. Even if these relocation entries typically
compress well, the combined size reduction of 2.8 MB uncompressed for a
ppc64_defconfig build (of which 2.4 MB is __init data) results in a ~500
KB space saving in the compressed image.
Since it is useful for some architectures (like x86) to retain the
ability to emit absolute values as well, this patch also adds support
for capturing both absolute and relative values when
KALLSYMS_ABSOLUTE_PERCPU is in effect, by emitting absolute per-cpu
addresses as positive 32-bit values, and addresses relative to the
lowest encountered relative symbol as negative values, which are
subtracted from the runtime address of this base symbol to produce the
actual address.
Support for the above is enabled by default for all architectures except
IA-64 and Tile-GX, whose symbols are too far apart to capture in this
manner.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit c6bda7c988 ("kallsyms: fix percpu vars on x86-64 with
relocation") overloaded the 'A' (absolute) symbol type to signify that a
symbol is not subject to dynamic relocation. However, the original A
type does not imply that at all, and depending on the version of the
toolchain, many A type symbols are emitted that are in fact relative to
the kernel text, i.e., if the kernel is relocated at runtime, these
symbols should be updated as well.
For instance, on sparc32, the following symbols are emitted as absolute
(kindly provided by Guenter Roeck):
f035a420 A _etext
f03d9000 A _sdata
f03de8c4 A jiffies
f03f8860 A _edata
f03fc000 A __init_begin
f041bdc8 A __init_text_end
f0423000 A __bss_start
f0423000 A __init_end
f044457d A __bss_stop
f044457d A _end
On x86_64, similar behavior can be observed:
ffffffff81a00000 A __end_rodata_hpage_align
ffffffff81b19000 A __vvar_page
ffffffff81d3d000 A _end
Even if only a couple of them pass the symbol range check that results
in them to be taken into account for the final kallsyms symbol table, it
is obvious that 'A' does not mean the symbol does not need to be updated
at relocation time, and overloading its meaning to signify that is
perhaps not a good idea.
So instead, add a new percpu_absolute member to struct sym_entry, and
when --absolute-percpu is in effect, use it to record symbols whose
addresses should be emitted as final values rather than values that
still require relocation at runtime. That way, we can drop the check
against the 'A' type.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michal Marek <mmarek@suse.cz>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since we have required at least GCC v3.2 for some time now, we
can drop the special handling of the 'gcc[0-9]_compiled.' label
which is not emitted anymore since GCC v3.0.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When linking large kernels on ARM, the linker will insert veneers
(i.e., PLT like stubs) when function symbols are out of reach for
the ordinary relative branch/branch-and-link instructions.
However, due to the fact that the kallsyms region sits in .rodata,
which is between .text and .init.text, additional veneers may be
emitted in the second pass due to the fact that the size of the
kallsyms region itself has pushed the .init.text section further
apart, requiring even more veneers.
So ignore the veneers when generating the symbol table. Veneers
have no corresponding source code, and they will not turn up in
backtraces anyway.
This patch also lightly refactors the symbol_valid() function
to use a local 'sym_name' rather than the obfuscated 'sym + 1'
and 'sym + offset'
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
