'error' will be initialized, so clean up the redundant initialization.
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
fallthrough warning by simply dropping the empty default case at
the bottom.
This contributes to the ongoing efforts to globally enable
-Wimplicit-fallthrough for Clang.
Link: https://github.com/KSPP/linux/issues/115
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/lkml/CAJZ5v0hLYWKX__oZdcCY0D20pNqpw8SkiTPOCNOtpqe--QLp4Q@mail.gmail.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI fan device IDs are shared between the fan driver and the
device power management code. The former is modular, so it needs
to include the table of device IDs for module autoloading and the
latter needs that list to avoid attaching the generic ACPI PM domain
to fan devices (which doesn't make sense) possibly before the fan
driver module is loaded.
Unfortunately, that requires the list of fan device IDs to be
updated in two places which is prone to mistakes, so put it into
a symbol definition in a separate header file so there is only one
copy of it in case it needs to be updated again in the future.
Fixes: b9ea0bae26 ("ACPI: PM: Avoid attaching ACPI PM domain to certain devices")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If ACPI is not enabled but support for ACPI and APEI is enabled in the
kernel, then the following warning is seen on boot ...
WARNING KERN EINJ: ACPI disabled.
For ARM64 platforms, the 'acpi_disabled' variable is true by default
and hence, the above is often seen on ARM64. Given that it can be
normal for ACPI to be disabled, make this an informational print rather
that a warning.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Generally, the C-state latency is provided by the _CST method or
FADT, but some OEM platforms using AMD Picasso, Renoir, Van Gogh,
and Cezanne set the C2 latency greater than C3's which causes the
C2 state to be skipped.
That will block the core entering PC6, which prevents S0ix working
properly on Linux systems.
In other operating systems, the latency values are not validated and
this does not cause problems by skipping states.
To avoid this issue on Linux, detect when latencies are not an
arithmetic progression and sort them.
Link: 026d186e45
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1230#note_712174
Suggested-by: Prike Liang <Prike.Liang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The older device property API is going to be removed.
Replacing the device_add_properties() call with software
node API equivalent device_create_managed_software_node().
Fixes: 434b73e61c ("iommu/arm-smmu-v3: Use device properties for pasid-num-bits")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The dep_unmet field in struct acpi_device is used to store the
number of unresolved _DEP dependencies (that is, operation region
dependencies for which there are no drivers present) for the ACPI
device object represented by it.
That field is initialized to 1 for all ACPI device objects in
acpi_add_single_object(), via acpi_init_device_object(), so as to
avoid evaluating _STA prematurely for battery device objects in
acpi_scan_init_status(), and it is "fixed up" in acpi_bus_check_add()
after the acpi_add_single_object() called by it has returned.
This is not particularly straightforward and causes dep_unmet to
remain 1 for device objects without dependencies created by invoking
acpi_add_single_object() directly, outside acpi_bus_check_add().
For this reason, rearrange acpi_add_single_object() to initialize
dep_unmet completely before calling acpi_scan_init_status(), which
requires passing one extra bool argument to it, and update all of
its callers accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
These are supposedly not required for AMD platforms,
but at least some HP laptops seem to require it to
properly turn off the keyboard backlight.
Based on a patch from Marcin Bachry <hegel666@gmail.com>.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1230
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix regression in ACPI NFIT table handling leading to crashes and
driver load failures.
- Move the nvdimm mailing list
- Miscellaneous minor fixups
-----BEGIN PGP SIGNATURE-----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=UGmD
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A regression fix for a bootup crash condition introduced in this merge
window and some other minor fixups:
- Fix regression in ACPI NFIT table handling leading to crashes and
driver load failures.
- Move the nvdimm mailing list
- Miscellaneous minor fixups"
* tag 'libnvdimm-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
ACPI: NFIT: Fix support for variable 'SPA' structure size
MAINTAINERS: Move nvdimm mailing list
tools/testing/nvdimm: Make symbol '__nfit_test_ioremap' static
libnvdimm: Remove duplicate struct declaration
Add device HID AMDI0022 to the AMD UART controller driver match table
and create a platform device for it. This controller can be found on
Microsoft Surface Laptop 4 devices and seems similar enough that we can
just copy the existing AMDI0020 entries.
Cc: <stable@vger.kernel.org> # 5.10+
Tested-by: Sachi King <nakato@nakato.io>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # for 8250_dw part
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210512210413.1982933-1-luzmaximilian@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI 6.4 introduced the "SpaLocationCookie" to the NFIT "System Physical
Address (SPA) Range Structure". The presence of that new field is
indicated by the ACPI_NFIT_LOCATION_COOKIE_VALID flag. Pre-ACPI-6.4
firmware implementations omit the flag and maintain the original size of
the structure.
Update the implementation to check that flag to determine the size
rather than the ACPI 6.4 compliant definition of 'struct
acpi_nfit_system_address' from the Linux ACPICA definitions.
Update the test infrastructure for the new expectations as well, i.e.
continue to emulate the ACPI 6.3 definition of that structure.
Without this fix the kernel fails to validate 'SPA' structures and this
leads to a crash in nfit_get_smbios_id() since that routine assumes that
SPAs are valid if it finds valid SMBIOS tables.
BUG: unable to handle page fault for address: ffffffffffffffa8
[..]
Call Trace:
skx_get_nvdimm_info+0x56/0x130 [skx_edac]
skx_get_dimm_config+0x1f5/0x213 [skx_edac]
skx_register_mci+0x132/0x1c0 [skx_edac]
Cc: Bob Moore <robert.moore@intel.com>
Cc: Erik Kaneda <erik.kaneda@intel.com>
Fixes: cf16b05c60 ("ACPICA: ACPI 6.4: NFIT: add Location Cookie field")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/162037273007.1195827.10907249070709169329.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add ACPI Device ID for DPTF battery participant for the Intel
Jasper Lake (INT3532) and Tiger Lake (INTC1050) SoC based platforms.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a new unique fan ACPI device ID for Alder Lake to
support it in acpi_dev_pm_attach() function.
Fixes: 38748bcb94 ("ACPI: DPTF: Support Alder Lake")
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If 'acpi_device_set_name()' fails, we must free
'acpi_device_bus_id->bus_id' or there is a (potential) memory leak.
Fixes: eb50aaf960 ("ACPI: scan: Use unique number for instance_no")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert commit 5db91e9cb5 ("Revert "ACPI: scan: Turn off unused
power resources during initialization") which was not necessary.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Restore terminal stack frame records. Their previous removal caused
traces which cross secondary_start_kernel to terminate one entry too
late, with a spurious "0" entry.
- Fix boot warning with pseudo-NMI due to the way we manipulate the PMR
register.
- ACPI fixes: avoid corruption of interrupt mappings on watchdog probe
failure (GTDT), prevent unregistering of GIC SGIs.
- Force SPARSEMEM_VMEMMAP as the only memory model, it saves with having
to test all the other combinations.
- Documentation fixes and updates: tagged address ABI exceptions on
brk/mmap/mremap(), event stream frequency, update booting requirements
on the configuration of traps.
-----BEGIN PGP SIGNATURE-----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=vYok
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull more arm64 updates from Catalin Marinas:
"A mix of fixes and clean-ups that turned up too late for the first
pull request:
- Restore terminal stack frame records. Their previous removal caused
traces which cross secondary_start_kernel to terminate one entry
too late, with a spurious "0" entry.
- Fix boot warning with pseudo-NMI due to the way we manipulate the
PMR register.
- ACPI fixes: avoid corruption of interrupt mappings on watchdog
probe failure (GTDT), prevent unregistering of GIC SGIs.
- Force SPARSEMEM_VMEMMAP as the only memory model, it saves with
having to test all the other combinations.
- Documentation fixes and updates: tagged address ABI exceptions on
brk/mmap/mremap(), event stream frequency, update booting
requirements on the configuration of traps"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kernel: Update the stale comment
arm64: Fix the documented event stream frequency
arm64: entry: always set GIC_PRIO_PSR_I_SET during entry
arm64: Explicitly document boot requirements for SVE
arm64: Explicitly require that FPSIMD instructions do not trap
arm64: Relax booting requirements for configuration of traps
arm64: cpufeatures: use min and max
arm64: stacktrace: restore terminal records
arm64/vdso: Discard .note.gnu.property sections in vDSO
arm64: doc: Add brk/mmap/mremap() to the Tagged Address ABI Exceptions
psci: Remove unneeded semicolon
ACPI: irq: Prevent unregistering of GIC SGIs
ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
arm64: Show three registers per line
arm64: remove HAVE_DEBUG_BUGVERBOSE
arm64: alternative: simplify passing alt_region
arm64: Force SPARSEMEM_VMEMMAP as the only memory management model
arm64: vdso32: drop -no-integrated-as flag
- Revent recent commit related to the handling of ACPI power
resources during initialization, because it turned out to cause
problems to occur on some systems (Rafael Wysocki).
- Fix potential use-after-free and potential memory leak in the
ACPI "custom method" debugfs interface (Mark Langsdorf).
- Update ACPI GPIO properties documentation to cover assumptions
regarding GPIO polarity (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=hm7T
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert one recent commit that turned out to be problematic,
address two issues in the ACPI "custom method" interface and update
GPIO properties documentation.
Specifics:
- Revent recent commit related to the handling of ACPI power
resources during initialization, because it turned out to cause
problems to occur on some systems (Rafael Wysocki).
- Fix potential use-after-free and potential memory leak in the ACPI
"custom method" debugfs interface (Mark Langsdorf).
- Update ACPI GPIO properties documentation to cover assumptions
regarding GPIO polarity (Andy Shevchenko)"
* tag 'acpi-5.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: scan: Turn off unused power resources during initialization"
ACPI: custom_method: fix a possible memory leak
ACPI: custom_method: fix potential use-after-free issue
Documentation: firmware-guide: gpio-properties: Add note to SPI CS case
* acpi-pm:
Revert "ACPI: scan: Turn off unused power resources during initialization"
* acpi-docs:
Documentation: firmware-guide: gpio-properties: Add note to SPI CS case
Merge more updates from Andrew Morton:
"The remainder of the main mm/ queue.
143 patches.
Subsystems affected by this patch series (all mm): pagecache, hugetlb,
userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap,
kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and
kfence"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (143 commits)
kfence: use power-efficient work queue to run delayed work
kfence: maximize allocation wait timeout duration
kfence: await for allocation using wait_event
kfence: zero guard page after out-of-bounds access
mm/process_vm_access.c: remove duplicate include
mm/mempool: minor coding style tweaks
mm/highmem.c: fix coding style issue
btrfs: use memzero_page() instead of open coded kmap pattern
iov_iter: lift memzero_page() to highmem.h
mm/zsmalloc: use BUG_ON instead of if condition followed by BUG.
mm/zswap.c: switch from strlcpy to strscpy
arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
mm,memory_hotplug: add kernel boot option to enable memmap_on_memory
acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported
mm,memory_hotplug: allocate memmap from the added memory range
mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count()
mm,memory_hotplug: relax fully spanned sections check
drivers/base/memory: introduce memory_block_{online,offline}
mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove
...
Let the caller check whether it can pass MHP_MEMMAP_ON_MEMORY by
checking mhp_supports_memmap_on_memory(). MHP_MEMMAP_ON_MEMORY can only
be set in case ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE is enabled, the
architecture supports altmap, and the range to be added spans a single
memory block.
Link: https://lkml.kernel.org/r/20210421102701.25051-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Including:
- Big cleanup of almost unsused parts of the IOMMU API by
Christoph Hellwig. This mostly affects the Freescale PAMU
driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- SMMUv3: Drop vestigial PREFETCH_ADDR support
- SMMUv3: Elide TLB sync logic for empty gather
- SMMUv3: Fix "Service Failure Mode" handling
- SMMUv2: New Qualcomm compatible string
- Removal of the AMD IOMMU performance counter writeable check
on AMD. It caused long boot delays on some machines and is
only needed to work around an errata on some older (possibly
pre-production) chips. If someone is still hit by this
hardware issue anyway the performance counters will just
return 0.
- Support for targeted invalidations in the AMD IOMMU driver.
Before that the driver only invalidated a single 4k page or the
whole IO/TLB for an address space. This has been extended now
and is mostly useful for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the
Intel VT-d driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost
when converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and
support iommu_ops to be const again when drivers are built as
modules.
-----BEGIN PGP SIGNATURE-----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=qF2C
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Big cleanup of almost unsused parts of the IOMMU API by Christoph
Hellwig. This mostly affects the Freescale PAMU driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- Drop vestigial PREFETCH_ADDR support (SMMUv3)
- Elide TLB sync logic for empty gather (SMMUv3)
- Fix "Service Failure Mode" handling (SMMUv3)
- New Qualcomm compatible string (SMMUv2)
- Removal of the AMD IOMMU performance counter writeable check on AMD.
It caused long boot delays on some machines and is only needed to
work around an errata on some older (possibly pre-production) chips.
If someone is still hit by this hardware issue anyway the performance
counters will just return 0.
- Support for targeted invalidations in the AMD IOMMU driver. Before
that the driver only invalidated a single 4k page or the whole IO/TLB
for an address space. This has been extended now and is mostly useful
for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the Intel VT-d
driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost when
converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and support
iommu_ops to be const again when drivers are built as modules.
* tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (84 commits)
iommu: Streamline registration interface
iommu: Statically set module owner
iommu/mediatek-v1: Add error handle for mtk_iommu_probe
iommu/mediatek-v1: Avoid build fail when build as module
iommu/mediatek: Always enable the clk on resume
iommu/fsl-pamu: Fix uninitialized variable warning
iommu/vt-d: Force to flush iotlb before creating superpage
iommu/amd: Put newline after closing bracket in warning
iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()'
iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86
iommu/amd: Remove performance counter pre-initialization test
Revert "iommu/amd: Fix performance counter initialization"
iommu/amd: Remove duplicate check of devid
iommu/exynos: Remove unneeded local variable initialization
iommu/amd: Page-specific invalidations for more than one page
iommu/arm-smmu-v3: Remove the unused fields for PREFETCH_CONFIG command
iommu/vt-d: Avoid unnecessary cache flush in pasid entry teardown
iommu/vt-d: Invalidate PASID cache when root/context entry changed
iommu/vt-d: Remove WO permissions on second-level paging entries
iommu/vt-d: Report the right page fault address
...
Revert commit 4b9ee772ea ("ACPI: scan: Turn off unused power
resources during initialization") that is reported to cause
initialization issues to occur.
Reported-by: Shujun Wang <wsj20369@163.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In cm_write(), if the 'buf' is allocated memory but not fully consumed,
it is possible to reallocate the buffer without freeing it by passing
'*ppos' as 0 on a subsequent call.
Add an explicit kfree() before kzalloc() to prevent the possible memory
leak.
Fixes: 526b4af47f ("ACPI: Split out custom_method functionality into an own driver")
Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In cm_write(), buf is always freed when reaching the end of the
function. If the requested count is less than table.length, the
allocated buffer will be freed but subsequent calls to cm_write() will
still try to access it.
Remove the unconditional kfree(buf) at the end of the function and
set the buf to NULL in the -EINVAL error path to match the rest of
function.
Fixes: 03d1571d95 ("ACPI: custom_method: fix memory leaks")
Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)
-----BEGIN PGP SIGNATURE-----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=wU6U
-----END PGP SIGNATURE-----
Merge tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
* acpi-misc:
ACPI: dock: fix some coding style issues
ACPI: sysfs: fix some coding style issues
ACPI: PM: add a missed blank line after declarations
ACPI: custom_method: fix a coding style issue
ACPI: CPPC: fix some coding style issues
ACPI: button: fix some coding style issues
ACPI: battery: fix some coding style issues
ACPI: acpi_pad: add a missed blank line after declarations
ACPI: LPSS: add a missed blank line after declarations
ACPI: ipmi: remove useless return statement for void function
ACPI: processor: fix some coding style issues
ACPI: APD: fix a block comment align issue
ACPI: AC: fix some coding style issues
ACPI: fix various typos in comments
* acpi-scan:
ACPI: bus: Introduce acpi_dev_get() and reuse it in ACPI code
ACPI: scan: Utilize match_string() API
ACPI: scan: Call acpi_get_object_info() from acpi_set_pnp_ids()
ACPI: scan: Drop sta argument from acpi_init_device_object()
ACPI: scan: Drop sta argument from acpi_add_single_object()
ACPI: scan: Rearrange checks in acpi_bus_check_add()
ACPI: scan: Fold acpi_bus_type_and_status() into its caller
* acpi-drivers:
ACPI: HED: Drop unused ACPI_MODULE_NAME() definition
* acpi-pm:
ACPI: power: Turn off unused power resources unconditionally
ACPI: scan: Turn off unused power resources during initialization
* acpi-resources:
resource: Prevent irqresource_disabled() from erasing flags
* acpi-messages:
hwmon: acpi_power_meter: Get rid of ACPICA message printing
IIO: acpi-als: Get rid of ACPICA message printing
ACPI: utils: Introduce acpi_evaluation_failure_warn()
ACPI: Drop unused ACPI_*_COMPONENT definitions and update documentation
ACPI: sysfs: Get rid of ACPICA message printing
* acpi-pci:
ACPI: PCI: Replace direct printk() invocations in pci_link.c
ACPI: PCI: Drop ACPI_PCI_COMPONENT that is not used any more
ACPI: PCI: Replace ACPI_DEBUG_PRINT() and ACPI_EXCEPTION()
ACPI: PCI: IRQ: Consolidate printing diagnostic messages
* acpi-processor:
ACPI: processor: perflib: Eliminate redundant status check
ACPI: processor: Get rid of ACPICA message printing
ACPI: processor: idle: Drop extra prefix from pr_notice()
ACPI: processor: Remove initialization of static variable
When using ACPI on arm64, which implies the GIC IRQ model, no
table should ever provide a GSI number in the range [0:15],
as these are reserved for IPIs.
However, drivers tend to call acpi_unregister_gsi() with any
random GSI number provided by half baked tables, which results
in an exploding kernel when its IPIs have been unconfigured.
In order to catch this, check for the silly case early, warn
that something is going wrong and avoid the above disaster.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20210421164317.1718831-3-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When failing the driver probe because of invalid firmware properties,
the GTDT driver unmaps the interrupt that it mapped earlier.
However, it never checks whether the mapping of the interrupt actially
succeeded. Even more, should the firmware report an illegal interrupt
number that overlaps with the GIC SGI range, this can result in an
IPI being unmapped, and subsequent fireworks (as reported by Dann
Frazier).
Rework the driver to have a slightly saner behaviour and actually
check whether the interrupt has been mapped before unmapping things.
Reported-by: dann frazier <dann.frazier@canonical.com>
Fixes: ca9ae5ec4e ("acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/YH87dtTfwYgavusz@xps13.dannf
Cc: <stable@vger.kernel.org>
Cc: Fu Wei <wefu@redhat.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20210421164317.1718831-2-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Force backlight control in these models to use the native interface
at /sys/class/backlight/amdgpu_bl0.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The variable rc is being assigned a value that is never read,
the assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The PCIe controller in Tegra194 SoC is not ECAM-compliant. With the
current hardware design, ECAM can be enabled only for one controller (the
C5 controller) with bus numbers starting from 160 instead of 0. A different
approach is taken to avoid this abnormal way of enabling ECAM for just one
controller but to enable configuration space access for all the other
controllers. In this approach, ops are added through MCFG quirk mechanism
which access the configuration spaces by dynamically programming iATU
(internal AddressTranslation Unit) to generate respective configuration
accesses just like the way it is done in DesignWare core sub-system.
This issue is specific to Tegra194 and it would be fixed in the future
generations of Tegra SoCs.
Link: https://lore.kernel.org/r/20210416134537.19474-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The DSDT and ACPI should be capitalized.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The macro requires to call acpi_dev_put() on each iteration.
Due to this it doesn't tolerate sudden disappearence of the devices.
Document all these nuances to prevent users blindly call it without
understanding the possible issues.
While at it, add the note to the acpi_dev_get_next_match_dev() and
advertise acpi_dev_put() instead of put_device() in the whole family
of the helper functions.
Fixes: bf263f64e8 ("media: ACPI / bus: Add acpi_dev_get_next_match_dev() and helper macro")
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce acpi_dev_get() to have a symmetrical API with acpi_dev_put()
and reuse both in ACPI code in drivers/acpi/.
While at it, use acpi_bus_put_acpi_device() in one place instead of
the above.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We have already an API to match a string in the array of strings.
Utilize it instead of open coded analogues.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
All of the CPPC sysfs show functions are called via indirect call in
kobj_attr_show(), where they should be of type
ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr, char *buf);
because that is the type of the ->show() member in
'struct kobj_attribute' but they are actually of type
ssize_t (*show)(struct kobject *kobj, struct attribute *attr, char *buf);
because of the ->show() member in 'struct cppc_attr', resulting in a
Control Flow Integrity violation [1].
$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/highest_perf
3400
$ dmesg | grep "CFI failure"
[ 175.970559] CFI failure (target: show_highest_perf+0x0/0x8):
As far as I can tell, the only difference between 'struct cppc_attr'
and 'struct kobj_attribute' aside from the type of the attr parameter
is the type of the count parameter in the ->store() member (ssize_t vs.
size_t), which does not actually matter because all of these nodes are
read-only.
Eliminate 'struct cppc_attr' in favor of 'struct kobj_attribute' to fix
the violation.
[1]: https://lore.kernel.org/r/20210401233216.2540591-1-samitolvanen@google.com/
Fixes: 158c998ea4 ("ACPI / CPPC: add sysfs support to compute delivered performance")
Link: https://github.com/ClangBuiltLinux/linux/issues/1343
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Notice that it is not necessary to call acpi_get_object_info() from
acpi_add_single_object() in order to pass the pointer returned by it
to acpi_init_device_object() and from there to acpi_set_pnp_ids().
It is more straightforward to call acpi_get_object_info() from
acpi_set_pnp_ids() and avoid unnecessary pointer passing, so change
the code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Use the observation that the initial status check for
ACPI_BUS_TYPE_PROCESSOR objects can be carried out in the same way
as for ACPI_BUS_TYPE_DEVICE objects and it is not necessary to fail
acpi_add_single_object() if acpi_bus_get_status_handle() returns an
error for a processor (its status can be set to 0 instead) to
simplify acpi_add_single_object().
Accordingly, drop the "sta" argument from acpi_init_device_object()
as it can always set the initial status to ACPI_STA_DEFAULT and let
its caller correct that later on.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Move the initial status check for ACPI_BUS_TYPE_PROCESSOR objects
into acpi_add_single_object() so it is not necessary to pass the
"sta" argument to it, get rid of that argument from there and update
the callers of that function accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Rearrange the checks in acpi_bus_check_add() to avoid checking
the "type" twice and take "check_dep" into account only for
ACPI_TYPE_DEVICE objects.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
There is only one caller of acpi_bus_type_and_status() which is
acpi_bus_check_add(), so fold the former into the latter and use
the observation that the initial status of the device is
ACPI_STA_DEFAULT in all cases except for ACPI_BUS_TYPE_PROCESSOR
to simplify the code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Starting with Windows 8, Windows no longer uses the ACPI-video interface
for backlight control by default. Instead backlight control is left up
to the GPU drivers and these are typically directly accessing the GPU
for this instead of going through ACPI.
This means that the ACPI video interface is no longer being tested by
many vendors, which leads to false-positive /sys/class/backlight entries
on devices which don't have a backlight at all such as desktops or
top-set boxes. These false-positives causes desktop environments to show
a non functional brightness slider in various places.
Checking the LCD flag greatly reduces the amount of false-positives,
so commit 5928c28152 ("ACPI / video: Default lcd_only to true on
Win8-ready and newer machines") enabled the checking of this flag
by default on all win8 BIOS-es. But this let to regressions on some
models, so the check was made stricter adding a DMI chassis-type check
to only enable the LCD flag checking on desktop/server chassis.
Unfortunately the chassis-type reported in the DMI strings is not always
reliable. One class of devices where this is a problem is Intel Bay Trail-T
based top-set boxes / mini PCs / HDMI sticks. These are based on reference
designs which were targetets and the reference design BIOS code
is often used without changing the chassis-type to something more
appropriate.
There are many, many Bay Trail-T based devices affected by this, so DMI
quirking our way out of this is a bad idea. This patch takes a different
approach, Bay Trail-T (unlike regular Bay Trail) is an ACPI-reduced-hw
platform and ACPI-reduced-hw platforms generally don't have
an embedded-controller and thus will use a native (GPU specific) backlight
interface. This patch enables Checking the LCD flag by default on
ACPI-reduced-hw platforms with a win8 BIOS independent of the reported
chassis-type, fixing the false positive /sys/class/backlight entries
on these devices.
Note in hindsight I should have never added the DMI chassis-type check
when the enabling of LCD flag checking on Windows 8 BIOS-es let to some
regressions. Instead I should have added DMI quirks for the (presumably
few) models where the LCD flag check let to issues. But I'm afraid that
it is too late to change this now, changing this now will likely lead to
a bunch of regressions.
This patch was tested on a Mele PCG03 mini PC.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a getter for the acpi_gbl_reduced_hardware variable so that modules
can check if they are running on an ACPI reduced-hw platform or not.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including
following types:
WARNING: Missing a blank line after declarations
ERROR: spaces required around that ':'
WARNING: Statements should start on a tabstop
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including
following types:
WARNING: Missing a blank line after declarations
WARNING: Block comments should align the * on each line
ERROR: open brace '{' following function definitions go on the next line
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a missed blank line after declarations, reported by checkpatch.pl.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix the following coding style issue reported by checkpatch.pl
ERROR: "foo * bar" should be "foo *bar"
FILE: drivers/acpi/custom_method.c:22:
+static ssize_t cm_write(struct file *file, const char __user * user_buf,
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including the
following types:
WARNING: Missing a blank line after declarations
WARNING: unnecessary whitespace before a quoted newline
ERROR: spaces required around that '>='
ERROR: switch and case should be at the same indent
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including the
following types:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
ERROR: code indent should use tabs where possible
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including the
following types:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
ERROR: code indent should use tabs where possible
WARNING: Missing a blank line after declarations
ERROR: spaces required around that '?' (ctx:WxV)
WARNING: Block comments should align the * on each line
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a missed blank line after declarations, reported by checkpatch.pl.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a missed blank line after declarations, reported by checkpatch.pl.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Remove useless return statement for void function, reported by
checkpatch.pl.
WARNING: void function return statements are not generally useful
FILE: drivers/acpi/acpi_ipmi.c:482:
+ return;
+}
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including the
following types:
ERROR: code indent should use tabs where possible
WARNING: Block comments use a trailing */ on a separate line
WARNING: Missing a blank line after declarations
WARNING: labels should not be indented
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix the following coding style issue reported by checkpatch.pl:
WARNING: Block comments should align the * on each line
+/**
+* Create platform device during acpi scan attach handle.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including the
following types:
ERROR: "foo * bar" should be "foo *bar"
ERROR: code indent should use tabs where possible
WARNING: Block comments use a trailing */ on a separate line
WARNING: braces {} are not necessary for single statement blocks
WARNING: void function return statements are not generally useful
WARNING: CVS style keyword markers, these will _not_ be updated
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit the result of squashing the following:
ACPICA commit 21a316fdaa46b3fb245a1920f3829cb05d6ced6e
ACPICA commit f5506fc7dad08c2a25ef52cf836c2d67385a612c
Link: https://github.com/acpica/acpica/commit/21a316fd
Link: https://github.com/acpica/acpica/commit/f5506fc7
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Also, update struct size to reflect these changes in nfit core driver.
ACPICA commit af60199a9a1de9e6844929fd4cc22334522ed195
Link: https://github.com/acpica/acpica/commit/af60199a
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 7f634ac53fe1e480c01ceff7532cd8dc6430f1b9
The ACPI device ID represents the CXL host bridge. _CBR objects gets
the memory location of CXL Host Bridge Registers.
Link: https://github.com/acpica/acpica/commit/7f634ac5
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 3cfef24ae2d98babbbfbe4ba612a2f5d9014d3ba
The object definition for these can be found in the ACPI 6.4
specification.
Link: https://github.com/acpica/acpica/commit/3cfef24a
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 8cdddd182b ("ACPI: processor: Fix CPU0 wakeup in
acpi_idle_play_dead()") tried to fix CPU0 hotplug breakage by copying
wakeup_cpu0() + start_cpu0() logic from hlt_play_dead()//mwait_play_dead()
into acpi_idle_play_dead(). The problem is that these functions are not
exported to modules so when CONFIG_ACPI_PROCESSOR=m build fails.
The issue could've been fixed by exporting both wakeup_cpu0()/start_cpu0()
(the later from assembly) but it seems putting the whole pattern into a
new function and exporting it instead is better.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 8cdddd182b ("CPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()")
Cc: <stable@vger.kernel.org> # 5.10+
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The pasid-num-bits property shouldn't need a dedicated fwspec field,
it's a job for device properties. Add properties for IORT, and access
the number of PASID bits using device_property_read_u32().
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20210401154718.307519-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 496121c021 ("ACPI: processor: idle: Allow probing on platforms
with one ACPI C-state") broke CPU0 hotplug on certain systems, e.g.
I'm observing the following on AWS Nitro (e.g r5b.xlarge but other
instance types are affected as well):
# echo 0 > /sys/devices/system/cpu/cpu0/online
# echo 1 > /sys/devices/system/cpu/cpu0/online
<10 seconds delay>
-bash: echo: write error: Input/output error
In fact, the above mentioned commit only revealed the problem and did
not introduce it. On x86, to wakeup CPU an NMI is being used and
hlt_play_dead()/mwait_play_dead() loops are prepared to handle it:
/*
* If NMI wants to wake up CPU0, start CPU0.
*/
if (wakeup_cpu0())
start_cpu0();
cpuidle_play_dead() -> acpi_idle_play_dead() (which is now being called on
systems where it wasn't called before the above mentioned commit) serves
the same purpose but it doesn't have a path for CPU0. What happens now on
wakeup is:
- NMI is sent to CPU0
- wakeup_cpu0_nmi() works as expected
- we get back to while (1) loop in acpi_idle_play_dead()
- safe_halt() puts CPU0 to sleep again.
The straightforward/minimal fix is add the special handling for CPU0 on x86
and that's what the patch is doing.
Fixes: 496121c021 ("ACPI: processor: idle: Allow probing on platforms with one ACPI C-state")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 71da201f38 ("ACPI: scan: Defer enumeration of devices with
_DEP lists") dropped the following 2 lines from acpi_init_device_object():
/* Assume there are unmet deps until acpi_device_dep_initialize() runs */
device->dep_unmet = 1;
Leaving the initial value of dep_unmet at the 0 from the kzalloc(). This
causes the acpi_bus_get_status() call in acpi_add_single_object() to
actually call _STA, even though there maybe unmet deps, leading to errors
like these:
[ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c)
[GenericSerialBus] (20170831/evregion-166)
[ 0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler
(20170831/exfldio-299)
[ 0.123618] ACPI Error: Method parse/execution failed
\_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550)
Fix this by re-adding the dep_unmet = 1 initialization to
acpi_init_device_object() and modifying acpi_bus_check_add() to make sure
that dep_unmet always gets setup there, overriding the initial 1 value.
This re-fixes the issue initially fixed by
commit 63347db0af ("ACPI / scan: Use acpi_bus_get_status() to initialize
ACPI_TYPE_DEVICE devs"), which introduced the removed
"device->dep_unmet = 1;" statement.
This issue was noticed; and the fix tested on a Dell Venue 10 Pro 5055.
Fixes: 71da201f38 ("ACPI: scan: Defer enumeration of devices with _DEP lists")
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 5.11+ <stable@vger.kernel.org> # 5.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The following problem has been reported by George Kennedy:
Since commit 7fef431be9 ("mm/page_alloc: place pages to tail
in __free_pages_core()") the following use after free occurs
intermittently when ACPI tables are accessed.
BUG: KASAN: use-after-free in ibft_init+0x134/0xc49
Read of size 4 at addr ffff8880be453004 by task swapper/0/1
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1
Call Trace:
dump_stack+0xf6/0x158
print_address_description.constprop.9+0x41/0x60
kasan_report.cold.14+0x7b/0xd4
__asan_report_load_n_noabort+0xf/0x20
ibft_init+0x134/0xc49
do_one_initcall+0xc4/0x3e0
kernel_init_freeable+0x5af/0x66b
kernel_init+0x16/0x1d0
ret_from_fork+0x22/0x30
ACPI tables mapped via kmap() do not have their mapped pages
reserved and the pages can be "stolen" by the buddy allocator.
Apparently, on the affected system, the ACPI table in question is
not located in "reserved" memory, like ACPI NVS or ACPI Data, that
will not be used by the buddy allocator, so the memory occupied by
that table has to be explicitly reserved to prevent the buddy
allocator from using it.
In order to address this problem, rearrange the initialization of the
ACPI tables on x86 to locate the initial tables earlier and reserve
the memory occupied by them.
The other architectures using ACPI should not be affected by this
change.
Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/
Reported-by: George Kennedy <george.kennedy@oracle.com>
Tested-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
For convenience, add empty stubs of library functions defined in
cppc_acpi.c for the CONFIG_ACPI_CPPC_LIB unset case.
Because one of them needs to return CPUFREQ_ETERNAL, include
linux/cpufreq.h into the CPPC library header file and drop the
direct inclusion of it from cppc_acpi.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
According to the ACPI specification (section 7.2.2 in ACPI 6.4), the
OS may evaluate the _OFF method of a power resource that is "off"
already [1], and in particular that can be done in the case of unused
power resources.
Accordingly, modify acpi_turn_off_unused_power_resources() to
evaluate the _OFF method for each of the unused power resources
unconditionally which may help to work around BIOS issues where the
return value of _STA for a power resource does not reflect the
actual state of the power resource [2].
Link: https://uefi.org/specs/ACPI/6.4/07_Power_and_Performance_Mgmt/declaring-a-power-resource-object.html#off # [1]
Link: https://lore.kernel.org/lkml/20210314000439.3138941-1-luzmaximilian@gmail.com/ # [2]
Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is reported that on certain platforms there are power resources
that are not associated with any devices physically present in the
platform. Those power resources are expected to be turned off by
the OS in accordance with the ACPI specification (section 7.3 of
ACPI 6.4) which currently is not done by Linux and that may lead
to obscure issues.
For instance, leaving those power resources in the "on" state may
prevent the platform from reaching the lowest power state in
suspend-to-idle which leads to excessive power draw.
For this reason, turn all of the unused ACPI power resources off
at the end of the initial namespace scan for devices in analogy with
resume from suspend-to-RAM.
Link: https://uefi.org/specs/ACPI/6.4/07_Power_and_Performance_Mgmt/device-power-management-objects.html
Reported-by: David Box <david.e.box@linux.intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The decrementation of acpi_device_bus_id->instance_no
in acpi_device_del() is incorrect, because it may cause
a duplicate instance number to be allocated next time
a device with the same acpi_device_bus_id is added.
Replace above mentioned approach by using IDA framework.
While at it, define the instance range to be [0, 4096).
Fixes: e49bd2dd5a ("ACPI: use PNPID:instance_no as bus_id of ACPI device")
Fixes: ca9dc8d42b ("ACPI / scan: Fix acpi_bus_id_list bookkeeping")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The .callback of the quirk for Sony VPCEH3U1E was unintetionally
removed by the commit 25417185e9 ("ACPI: video: Add DMI quirk
for GIGABYTE GB-BXBT-2807"). Add it back to make sure the quirk
for Sony VPCEH3U1E works as expected.
Fixes: 25417185e9 ("ACPI: video: Add DMI quirk for GIGABYTE GB-BXBT-2807")
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek (CIP) <pavel@denx.de>
Cc: 5.11+ <stable@vger.kernel.org> # 5.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Quite a few users of ACPI objects want to log a warning message if
the evaluation fails which is a repeating pattern, so introduce a
helper function for that purpose and convert some code where it is
open-coded to using it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
One of the "status != AE_NOT_FOUND" checks in
acpi_processor_get_platform_limit() is redundant,
so rearrange the code to eliminate it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Drop the definitions of the following symbols:
ACPI_SBS_COMPONENT
ACPI_FAN_COMPONENT
ACPI_CONTAINER_COMPONENT
ACPI_MEMORY_DEVICE_COMPONENT
that are not used in a meaningful way any more and update the ACPI
debug documentation to avoid confusing users by making the impression
that the ACPICA debug can be used for anything other than ACPICA
itself, which is incorrect.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Replace the only ACPI_EXCEPTION() instance in sysfs.c with a
pr_warn() call, drop the _COMPONENT and ACPI_MODULE_NAME()
definitions that are not used any more and drop the
ACPI_SYSTEM_COMPONENT definition that would not be used any
more in a meaningful way after the above changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
ACPI_MODULE_NAME() is only used by ACPICA message printing which in
turn is not used by the ACPI HED driver, so drop that definition from
there.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
The ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() macros are used for
message printing in the ACPICA code and they should not be used
elsewhere. Special configuration (either kernel command line or
sysfs-based) is needed to see the messages printed by them and
the format of those messages is also special and convoluted.
For this reason, replace all of the ACPI_DEBUG_PRINT() and
ACPI_EXCEPTION() instances in the ACPI processor driver with
corresponding dev_*(), acpi_handle_*() and pr_*() calls depending
on the context in which they appear.
Also drop the ACPI_PROCESSOR_COMPONENT definition that is not going
to be necessary any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Drop "ACPI: " from the pr_noitice() instance in
acpi_processor_cstate_first_run_checks(), because pr_fmt() causes
that prefix to be added to the message already.
Reported-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Address the following checkpatch error:
ERROR: do not initialise statics to false
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the direct printk() invocations in pci_link.c with (mostly
corresponding) acpi_handle_*() calls relative to the ACPI handle of
the given link device, which allows the AML corresponding to those
messages to be identified more easily, or with pr_*() calls.
While at it, add a pr_fmt() definition ot pci_link.c, make
acpi_pci_link_check_possible() print all messages with
acpi_handle_debug() for consistency and replace the (not-so-
reliable) KERN_CONT-based message line composition in
acpi_pci_link_add() with two pr_info() and a series of
acpi_handle_debug() calls (the latter for the possible IRQs).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
After dropping all of the code using ACPI_PCI_COMPONENT drop the
definition of it too and update the documentation to remove all
ACPI_PCI_COMPONENT references from it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
The ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() macros are used for
message printing in the ACPICA code and they should not be used
elsewhere. Special configuration (either kernel command line or
sysfs-based) is needed to see the messages printed by them and
the format of those messages is also special and convoluted.
For this reason, replace all of the ACPI_DEBUG_PRINT() and
ACPI_EXCEPTION() instances in pci_link.c with acpi_handle_*() calls
relative to the ACPI handle of the given link device (wherever that
handle is readily available) or pr_debug() invocations.
While at it, make acpi_pci_link_check_current() print all messages
with pr_debug(), because all of them are in the same category (_CRS
return buffer issues) and they all should be printed at the same log
level.
Also make acpi_pci_link_set() use acpi_handle_*() for printing all
messages for consistency.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
The code in pci_irq.c prints diagnostic messages using different
and inconsistent methods. The majority of them are printed with
the help of the dev_*() familiy of logging functions, but
ACPI_DEBUG_PRINT() and ACPI_DEBUG_PRINT_RAW() are still used in
some places which requires the ACPICA debug to be enabled
additionally which is a nuisance and one message is printed
using the raw printk().
To consolidate the printing of messages in that code, convert all of
the ACPI_DEBUG_PRINT() instances in it into dev_dbg(), which is
consistent with the way the other messages are printed by it,
replace the only ACPI_DEBUG_PRINT_RAW() instance with pr_debug() and
make it use pr_warn() istead of printk(KERN_WARNING ).
Also add a pr_fmt() definition to that file and drop the
_COMPONENT and ACPI_MODULE_NAME() definitions that are not used
any more after the above changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
- Rearrange Kconfig handling of ACPI_PLATFORM_PROFILE, add
"balanced-performance" to the list of supported platform profiles
and fix up some file references in a comment (Maximilian Luz).
- Add support for parsing the ACPI Firmware Performance Data Table
(FPDT) and exposing the data from there via sysfs (Zhang Rui).
-----BEGIN PGP SIGNATURE-----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=uIpI
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.12-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These make additional changes to the platform profile interface merged
recently and add support for the FPDT ACPI table.
Specifics:
- Rearrange Kconfig handling of ACPI_PLATFORM_PROFILE, add
"balanced-performance" to the list of supported platform profiles
and fix up some file references in a comment (Maximilian Luz).
- Add support for parsing the ACPI Firmware Performance Data Table
(FPDT) and exposing the data from there via sysfs (Zhang Rui)"
* tag 'acpi-5.12-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: platform: Add balanced-performance platform profile
ACPI: platform: Fix file references in comment
ACPI: platform: Hide ACPI_PLATFORM_PROFILE option
ACPI: tables: introduce support for FPDT table
-----BEGIN PGP SIGNATURE-----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=GXL5
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Remove unnecessary locking around _OSC (Bjorn Helgaas)
- Clarify message about _OSC failure (Bjorn Helgaas)
- Remove notification of PCIe bandwidth changes (Bjorn Helgaas)
- Tidy checking of syscall user config accessors (Heiner Kallweit)
Resource management:
- Decline to resize resources if boot config must be preserved (Ard
Biesheuvel)
- Fix pci_register_io_range() memory leak (Geert Uytterhoeven)
Error handling (Keith Busch):
- Clear error status from the correct device
- Retain error recovery status so drivers can use it after reset
- Log the type of Port (Root or Switch Downstream) that we reset
- Always request a reset for Downstream Ports in frozen state
Endpoint framework and NTB (Kishon Vijay Abraham I):
- Make *_get_first_free_bar() take into account 64 bit BAR
- Add helper API to get the 'next' unreserved BAR
- Make *_free_bar() return error codes on failure
- Remove unused pci_epf_match_device()
- Add support to associate secondary EPC with EPF
- Add support in configfs to associate two EPCs with EPF
- Add pci_epc_ops to map MSI IRQ
- Add pci_epf_ops to expose function-specific attrs
- Allow user to create sub-directory of 'EPF Device' directory
- Implement ->msi_map_irq() ops for cadence
- Configure LM_EP_FUNC_CFG based on epc->function_num_map for cadence
- Add EP function driver to provide NTB functionality
- Add support for EPF PCI Non-Transparent Bridge
- Add specification for PCI NTB function device
- Add PCI endpoint NTB function user guide
- Add configfs binding documentation for pci-ntb endpoint function
Broadcom STB PCIe controller driver:
- Add support for BCM4908 and external PERST# signal controller
(Rafał Miłecki)
Cadence PCIe controller driver:
- Retrain Link to work around Gen2 training defect (Nadeem Athani)
- Fix merge botch in cdns_pcie_host_map_dma_ranges() (Krzysztof
Wilczyński)
Freescale Layerscape PCIe controller driver:
- Add LX2160A rev2 EP mode support (Hou Zhiqiang)
- Convert to builtin_platform_driver() (Michael Walle)
MediaTek PCIe controller driver:
- Fix OF node reference leak (Krzysztof Wilczyński)
Microchip PolarFlare PCIe controller driver:
- Add Microchip PolarFire PCIe controller driver (Daire McNamara)
Qualcomm PCIe controller driver:
- Use PHY_REFCLK_USE_PAD only for ipq8064 (Ansuel Smith)
- Add support for ddrss_sf_tbu clock for sm8250 (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Drop PCIE_RCAR config option (Lad Prabhakar)
- Always allocate MSI addresses in 32bit space (Marek Vasut)
Rockchip PCIe controller driver:
- Add FriendlyARM NanoPi M4B DT binding (Chen-Yu Tsai)
- Make 'ep-gpios' DT property optional (Chen-Yu Tsai)
Synopsys DesignWare PCIe controller driver:
- Work around ECRC configuration hardware defect (Vidya Sagar)
- Drop support for config space in DT 'ranges' (Rob Herring)
- Change size to u64 for EP outbound iATU (Shradha Todi)
- Add upper limit address for outbound iATU (Shradha Todi)
- Make dw_pcie ops optional (Jisheng Zhang)
- Remove unnecessary dw_pcie_ops from al driver (Jisheng Zhang)
Xilinx Versal CPM PCIe controller driver:
- Fix OF node reference leak (Pan Bian)
Miscellaneous:
- Remove tango host controller driver (Arnd Bergmann)
- Remove IRQ handler & data together (altera-msi, brcmstb, dwc)
(Martin Kaiser)
- Fix xgene-msi race in installing chained IRQ handler (Martin
Kaiser)
- Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy (Junhao He)
- Fix pci-bridge-emul array overruns (Russell King)
- Remove obsolete uses of WARN_ON(in_interrupt()) (Sebastian Andrzej
Siewior)"
* tag 'pci-v5.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (69 commits)
PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064
PCI: qcom: Add support for ddrss_sf_tbu clock
dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250
PCI: al: Remove useless dw_pcie_ops
PCI: dwc: Don't assume the ops in dw_pcie always exist
PCI: dwc: Add upper limit address for outbound iATU
PCI: dwc: Change size to u64 for EP outbound iATU
PCI: dwc: Drop support for config space in 'ranges'
PCI: layerscape: Convert to builtin_platform_driver()
PCI: layerscape: Add LX2160A rev2 EP mode support
dt-bindings: PCI: layerscape: Add LX2160A rev2 compatible strings
PCI: dwc: Work around ECRC configuration issue
PCI/portdrv: Report reset for frozen channel
PCI/AER: Specify the type of Port that was reset
PCI/ERR: Retain status from error notification
PCI/AER: Clear AER status from Root Port when resetting Downstream Port
PCI/ERR: Clear status of the reporting device
dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B
PCI: rockchip: Make 'ep-gpios' DT property optional
Documentation: PCI: Add PCI endpoint NTB function user guide
...
Some devices, including most Microsoft Surface devices, have a platform
profile somewhere inbetween balanced and performance. More specifically,
adding this profile allows the following mapping on Surface devices:
Vendor Name Platform Profile
------------------------------------------
Battery Saver low-power
Recommended balanced
Better Performance balanced-performance
Best Performance performance
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI_PLATFORM_PROFILE option essentially provides a library and not
really an independent module. Thus it seems to be more user-friendly to
hide this option and simply make drivers depending on it select it.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix race condition in generic_serial_bus (I2C) and GPIO
Operation Region handling in ACPICA and reduce some related
code duplication (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=GW2r
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Fix race condition in generic_serial_bus (I2C) and GPIO Operation
Region handling in ACPICA and reduce some related code duplication
(Hans de Goede)"
* tag 'acpi-5.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Remove some code duplication from acpi_ev_address_space_dispatch
ACPICA: Fix race in generic_serial_bus (I2C) and GPIO op_region parameter handling
* acpica:
ACPICA: Remove some code duplication from acpi_ev_address_space_dispatch
ACPICA: Fix race in generic_serial_bus (I2C) and GPIO op_region parameter handling
thermal driver (Daniel Lezcano)
- Remove the notify ops as it is no longer used (Daniel Lezcano)
- Remove the 'forced passive' option and the unused bind/unbind
functions (Daniel Lezcano)
- Remove the THERMAL_TRIPS_NONE and the code cleanup around this
macro (Daniel Lezcano)
- Rework the delays to make them pre-computed instead of computing
them again and again at each polling interval (Daniel Lezcano)
- Remove the pointless 'thermal_zone_device_reset' function (Daniel
Lezcano)
- Use the critical and hot ops to prevent an unexpected system
shutdown on int340x (Kai-Heng Feng)
- Make the cooling device state private to the thermal subsystem
(Daniel Lezcano)
- Prevent to use not-power-aware actor devices with the power
allocator governor (Lukasz Luba)
- Remove 'zx' and 'tango' support along with the corresponding
platforms (Arnd Bergman)
- Fix several issues on the Omap thermal driver (Tony Lindgren)
- Add support for adc-tm5 PMIC thermal monitor for Qcom
platforms. Please note those changes rely on an immutable branch:
iio-thermal-5.11-rc1/ib-iio-thermal-5.11-rc1 from the iio tree
(Dmitry Baryshkov)
- Fix an initialization loop in the adc-tm5 (Colin Ian King)
- Fix a return error check in the cpufreq cooling device (Viresh Kumar)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmAvkKMACgkQqDIjiipP
6E9yFggAmXy8t2j1mRvn/KLU+teTGIoSFkZ8mBnY2Sgip97IRZRhCwAZbUKOW0eI
bvpAzBjacxdZHT7OxxvGzCOq/zlAh4UoStI8bMpzdUWPdkAj4ippArLYGvagLym8
WEQysWnrr8V1RCZbQuBNjyLwjf0fcXkzIBU1mbZXA8T8Y6Yn646TdtsrVT4Idg1j
MOg7PAHBcTSY/wOReZKJ5TB1yvo2tNOuGOqUVbrIAHlRkiNTVHirVUq6aZGtTTKp
7ukcu8EI/o7XKBdQ5d9MZaHdwkcyAIJj4jdjmjkUJpa8VYQFPjayNyN3I+Py9lH2
jtWVYHQxZbY166IZP2yeXFjPzd6elw==
=Jmz4
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Use the newly introduced 'hot' and 'critical' ops for the acpi
thermal driver (Daniel Lezcano)
- Remove the notify ops as it is no longer used (Daniel Lezcano)
- Remove the 'forced passive' option and the unused bind/unbind
functions (Daniel Lezcano)
- Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro
(Daniel Lezcano)
- Rework the delays to make them pre-computed instead of computing them
again and again at each polling interval (Daniel Lezcano)
- Remove the pointless 'thermal_zone_device_reset' function (Daniel
Lezcano)
- Use the critical and hot ops to prevent an unexpected system shutdown
on int340x (Kai-Heng Feng)
- Make the cooling device state private to the thermal subsystem
(Daniel Lezcano)
- Prevent to use not-power-aware actor devices with the power allocator
governor (Lukasz Luba)
- Remove 'zx' and 'tango' support along with the corresponding
platforms (Arnd Bergman)
- Fix several issues on the Omap thermal driver (Tony Lindgren)
- Add support for adc-tm5 PMIC thermal monitor for Qcom platforms
(Dmitry Baryshkov)
- Fix an initialization loop in the adc-tm5 (Colin Ian King)
- Fix a return error check in the cpufreq cooling device (Viresh Kumar)
* tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error
thermal: qcom: Fix comparison with uninitialized variable channels_available
thermal: qcom: add support for adc-tm5 PMIC thermal monitor
dt-bindings: thermal: qcom: add adc-thermal monitor bindings
thermal: ti-soc-thermal: Use non-inverted define for omap4
thermal: ti-soc-thermal: Simplify polling with iopoll
thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
thermal: ti-soc-thermal: Skip pointless register access for dra7
thermal/drivers/zx: Remove zx driver
thermal/drivers/tango: Remove tango driver
thermal: power allocator: fail binding for non-power actor devices
thermal/core: Make cooling device state change private
thermal: intel: pch: Fix unexpected shutdown at critical temperature
thermal: int340x: Fix unexpected shutdown at critical temperature
thermal/core: Remove pointless thermal_zone_device_reset() function
thermal/core: Remove ms based delay fields
thermal/core: Use precomputed jiffies for the polling
thermal/core: Precompute the delays from msecs to jiffies
thermal/core: Remove unused macro THERMAL_TRIPS_NONE
thermal/core: Remove THERMAL_TRIPS_NONE test
...
-----BEGIN PGP SIGNATURE-----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=/wKL
-----END PGP SIGNATURE-----
Merge tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- some core fixes in VB2 mem2mem support
- some improvements and cleanups in V4L2 async kAPI
- newer controls in V4L2 API for H-264 and HEVC codecs
- allegro-dvt driver was promoted from staging
- new i2c sendor drivers: imx334, ov5648, ov8865
- new automobile camera module: rdacm21
- ipu3 cio2 driver started gained support for some ACPI BIOSes
- new ATSC frontend: MaxLinear mxl692 VSB tuner/demod
- the SMIA/CCS driver gained more support for CSS standard
- several driver fixes, updates and improvements
* tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (362 commits)
media: v4l: async: Fix kerneldoc documentation for async functions
media: i2c: max9271: Add MODULE_* macros
media: i2c: Kconfig: Make MAX9271 a module
media: imx334: 'ret' is uninitialized, should have been PTR_ERR()
media: i2c: Add imx334 camera sensor driver
media: dt-bindings: media: Add bindings for imx334
media: ov8856: Configure sensor for GRBG Bayer for all modes
media: i2c: imx219: Implement V4L2_CID_LINK_FREQ control
media: ov5675: fix vflip/hflip control
media: ipu3-cio2: Build bridge only if ACPI is enabled
media: Remove the legacy v4l2-clk API
media: ov6650: Use the generic clock framework
media: mt9m111: Use the generic clock framework
media: ov9640: Use the generic clock framework
media: pxa_camera: Drop the v4l2-clk clock register
media: mach-pxa: Register the camera sensor fixed-rate clock
media: i2c: imx258: get clock from device properties and enable it via runtime PM
media: i2c: imx258: simplify getting state container
media: i2c: imx258: add support for binding via device tree
media: dt-bindings: media: imx258: add bindings for IMX258 sensor
...
- Update ACPICA code in the kernel to upstream revision 20201113
with changes as follows:
* Remove the MTMR (Mid-Timer) table (Al Stone).
* Remove the VRTC table (Al Stone).
* Add type casts for string functions (Bob Moore).
* Update all copyrights to 2021 (Bob Moore).
* Fix exception code class checks (Maximilian Luz).
* Clean up exception code class checks (Maximilian Luz).
* Fix -Wfallthrough (Nick Desaulniers).
- Add support for setting and reading global profile of the platform
along with documentation (Mark Pearson, Hans de Goede, Jiaxun Yang).
- Fix fwnode properties matching and clean up the code handling
device properties and its documentation (Rafael Wysocki, Andy
Shevchenko).
- Clean up ACPI-based device enumeration code (Rafael Wysocki).
- Clean up the CPPC support library code (Ionela Voinescu).
- Clean up the APEI support code (Yang Li, Yazen Ghannam).
- Update GPIO-related properties documentation (Flavio Suligoi).
- Consolidate and clean up the printing of messages in several
places (Rafael Wysocki).
- Fix error code path in configfs handling code (Qinglang Miao).
- Use DEVICE_ATTR_<RW|RO|WO> macros where applicable (Dwaipayan Ray).
- Replace tests for !ACPI_FAILURE with tests for ACPI_SUCCESS in
multiple places (Bjorn Helgaas).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmAqu2wSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxyWYQAIGKknnitF3TxHyXj5Ka+RQXlvygYAZo
9rQHy9EwUjkWpEiMZf87haWr3bp3EY1y7CnSdYiL9JgRJP9bqXI4ZQO8R2vXpV03
NJ46NO7/qNGF1dp5Zbt/QSObkk1yloqNPzU3gH/yo+xNHEc0OzjD9roJr7QA1Oes
ibCCmSG9mpMOVdNCzwIK+hiY6IdQCWIQyY/DZwTaf66U1+ZVTLsWNtVWzADNOKIz
DcXW54LZAt7c8kNcwwRxqAac+JOQ/RWBpvnexwgPEV82blad/+nd9egHlTjiEJCl
fxBmnMNqRcClrgo5SCvJNh1Z17d3bzhPUbF1K2RMiim2JSRXAZxK8euxVGTff2zI
SKsgFcOqLPHYtM0po5V7fgYCRnk6M1aI44s26JCei5hSM1TrlwddKIuR/D42/73O
F4TCGmkJMEUFltkpUAqo4gqoZcB7TZW/YX7pjy59yNw0VP8mGQSu+xU1SEdvasTg
XYbVeFUoDe6QLGqu8ukDq7GeXnV16t6Q2b2A+RxmFaKFZGGUH+IPKQp1XbGLnhnM
JKirrQnwwHqCZOu7D4LoSOgUvHYIF7B+nTA10QA5liq3XvYwjszFOG79cBImSaeV
jxx7rgoZ55H45gfB2kQE6OwO7RmFZ4bEB4/k/Oav7ewOPFiY5hrxJt2OIaJYLE87
pcGH533ZlBoS
=WpL7
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20210105, fix and clean up the handling of device properties, add
support for setting global profile of the platform, clean up device
enumeration, the CPPC library, the APEI support and more, update the
documentation, consolidate the printing of messages in several places
and make assorted janitorial changes.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20201113 with
changes as follows:
* Remove the MTMR (Mid-Timer) table (Al Stone).
* Remove the VRTC table (Al Stone).
* Add type casts for string functions (Bob Moore).
* Update all copyrights to 2021 (Bob Moore).
* Fix exception code class checks (Maximilian Luz).
* Clean up exception code class checks (Maximilian Luz).
* Fix -Wfallthrough (Nick Desaulniers).
- Add support for setting and reading global profile of the platform
along with documentation (Mark Pearson, Hans de Goede, Jiaxun
Yang).
- Fix fwnode properties matching and clean up the code handling
device properties and its documentation (Rafael Wysocki, Andy
Shevchenko).
- Clean up ACPI-based device enumeration code (Rafael Wysocki).
- Clean up the CPPC support library code (Ionela Voinescu).
- Clean up the APEI support code (Yang Li, Yazen Ghannam).
- Update GPIO-related properties documentation (Flavio Suligoi).
- Consolidate and clean up the printing of messages in several places
(Rafael Wysocki).
- Fix error code path in configfs handling code (Qinglang Miao).
- Use DEVICE_ATTR_<RW|RO|WO> macros where applicable (Dwaipayan Ray).
- Replace tests for !ACPI_FAILURE with tests for ACPI_SUCCESS in
multiple places (Bjorn Helgaas)"
* tag 'acpi-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
ACPI: property: Satisfy kernel doc validator (part 2)
ACPI: property: Satisfy kernel doc validator (part 1)
ACPI: property: Make acpi_node_prop_read() static
ACPI: property: Remove dead code
ACPI: property: Fix fwnode string properties matching
ACPI: OSL: Clean up printing messages
ACPI: OSL: Rework acpi_check_resource_conflict()
ACPI: APEI: ERST: remove unneeded semicolon
ACPI: thermal: Clean up printing messages
ACPI: video: Clean up printing messages
ACPI: button: Clean up printing messages
ACPI: battery: Clean up printing messages
ACPI: AC: Clean up printing messages
ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more
ACPI: utils: Clean up printing messages
ACPI: scan: Clean up printing messages
ACPI: bus: Clean up printing messages
ACPI: PM: Clean up printing messages
ACPI: power: Clean up printing messages
ACPI: APEI: Add is_generic_error() to identify GHES sources
...
Here is the big set of USB and Thunderbolt driver changes for 5.12-rc1.
It's been an active set of development in these subsystems for the past
few months:
- loads of typec features added for new hardware
- xhci features and bugfixes
- dwc3 features added for more hardware support
- dwc2 fixes and new hardware support
- cdns3 driver updates for more hardware support
- gadget driver cleanups and minor fixes
- usb-serial fixes, new driver, and more devices supported
- thunderbolt feature additions for new hardware
- lots of other tiny fixups and additions
The chrome driver changes are in here as well, as they depended on some
of the typec changes, and the maintainer acked them.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYCqf5Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykZhQCgoDMMu9YZZI8chWVlIbDYiHxG520An1SlbwDb
hRh87fsQFkwWk06Bp9AQ
=LmS1
-----END PGP SIGNATURE-----
Merge tag 'usb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
5.12-rc1.
It's been an active set of development in these subsystems for the
past few months:
- loads of typec features added for new hardware
- xhci features and bugfixes
- dwc3 features added for more hardware support
- dwc2 fixes and new hardware support
- cdns3 driver updates for more hardware support
- gadget driver cleanups and minor fixes
- usb-serial fixes, new driver, and more devices supported
- thunderbolt feature additions for new hardware
- lots of other tiny fixups and additions
The chrome driver changes are in here as well, as they depended on
some of the typec changes, and the maintainer acked them.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (300 commits)
dt-bindings: usb: mediatek: musb: add mt8516 compatbile
dt-bindings: usb: mtk-xhci: add compatible for mt2701 and mt7623
dt-bindings: usb: mtk-xhci: add optional assigned clock properties
Documentation: connector: Update the description of sink-vdos
usb: misc: usb3503: Fix logic in usb3503_init()
dt-bindings: usb: usb-device: fix typo in required properties
usb: Replace lkml.org links with lore
dt-bindings: usb: dwc3: add description for rk3328
dt-bindings: usb: convert rockchip,dwc3.txt to yaml
usb: quirks: add quirk to start video capture on ELMO L-12F document camera reliable
USB: quirks: sort quirk entries
USB: serial: drop bogus to_usb_serial_port() checks
USB: serial: make remove callback return void
USB: serial: drop if with an always false condition
usb: gadget: Assign boolean values to a bool variable
usb: typec: tcpm: Get Sink VDO from fwnode
dt-bindings: connector: Add SVDM VDO properties
usb: typec: displayport: Fill the negotiated SVDM Version in the header
usb: typec: ucsi: Determine common SVDM Version
usb: typec: tcpm: Determine common SVDM Version
...
ACPICA commit 383f50ff8cb7424ca16a6c0234f103b41d4a783e
The handling of the space_id == ACPI_ADR_SPACE_GSBUS and
space_id == ACPI_ADR_SPACE_GPIO cases is almost identical,
fold the 2 cases into 1 to remove some code duplication.
Link: https://github.com/acpica/acpica/commit/383f50ff
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit c9e0116952363b0fa815143dca7e9a2eb4fefa61
The handling of the generic_serial_bus (I2C) and GPIO op_regions in
acpi_ev_address_space_dispatch() passes a number of extra parameters
to the address-space handler through the address-space Context pointer
(instead of using more function parameters).
The Context is shared between threads, so if multiple threads try to
call the handler for the same address-space at the same time, then
a second thread could change the parameters of a first thread while
the handler is running for the first thread.
An example of this race hitting is the Lenovo Yoga Tablet2 1015L,
where there are both attrib_bytes accesses and attrib_byte accesses
to the same address-space. The attrib_bytes access stores the number
of bytes to transfer in Context->access_length. Where as for the
attrib_byte access the number of bytes to transfer is always 1 and
field_obj->Field.access_length is unused (so 0). Both types of
accesses racing from different threads leads to the following problem:
1. Thread a. starts an attrib_bytes access, stores a non 0 value
from field_obj->Field.access_length in Context->access_length
2. Thread b. starts an attrib_byte access, stores 0 in
Context->access_length
3. Thread a. calls i2c_acpi_space_handler() (under Linux). Which
sees that the access-type is ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE
and calls acpi_gsb_i2c_read_bytes(..., Context->access_length)
4. At this point Context->access_length is 0 (set by thread b.)
rather then the field_obj->Field.access_length value from thread a.
This 0 length reads leads to the following errors being logged:
i2c i2c-0: adapter quirk: no zero length (addr 0x0078, size 0, read)
i2c i2c-0: i2c read 0 bytes from client@0x78 starting at reg 0x0 failed, error: -95
Note this is just an example of the problems which this race can cause.
There are likely many more (sporadic) problems caused by this race.
This commit adds a new context_mutex to struct acpi_object_addr_handler
and makes acpi_ev_address_space_dispatch() take that mutex when
using the shared Context to pass extra parameters to an address-space
handler, fixing this race.
Note the new mutex must be taken *after* exiting the interpreter,
therefor the existing acpi_ex_exit_interpreter() call is moved to above
the code which stores the extra parameters in the Context.
Link: https://github.com/acpica/acpica/commit/c9e01169
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-messages:
ACPI: OSL: Clean up printing messages
ACPI: OSL: Rework acpi_check_resource_conflict()
ACPI: thermal: Clean up printing messages
ACPI: video: Clean up printing messages
ACPI: button: Clean up printing messages
ACPI: battery: Clean up printing messages
ACPI: AC: Clean up printing messages
ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more
ACPI: utils: Clean up printing messages
ACPI: scan: Clean up printing messages
ACPI: bus: Clean up printing messages
ACPI: PM: Clean up printing messages
ACPI: power: Clean up printing messages
CHECK drivers/acpi/property.c
warning: Function parameter or member '__fwnode' not described in 'acpi_graph_get_remote_endpoint'
warning: Excess function parameter 'fwnode' description in 'acpi_graph_get_remote_endpoint'
warning: Excess function parameter 'endpoint' description in 'acpi_graph_get_remote_endpoint'
Fixes: 0ef7478639 ("ACPI: property: Make the ACPI graph API private")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CHECK drivers/acpi/property.c
warning: Function parameter or member 'data' not described in 'acpi_data_get_property_array'
warning: Excess function parameter 'adev' description in 'acpi_data_get_property_array'
Fixes: 3a7a2ab839 ("ACPI / property: Extend fwnode_property_* to data-only subnodes")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no users outside of property.c. No need to export
acpi_node_prop_read(), hence make it static.
Fixes: 3708184afc ("device property: Move FW type specific functionality to FW specific files")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After the commit 3a7a2ab839 couple of functions became a dead code.
Moreover, for all these years nobody used them. Remove.
Fixes: 3a7a2ab839 ("ACPI / property: Extend fwnode_property_* to data-only subnodes")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Property matching does not work for ACPI fwnodes if the value of the
given property is not represented as a package in the _DSD package
containing it. For example, the "compatible" property in the _DSD
below
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"compatible", "ethernet-phy-ieee802.3-c45"}
}
})
will not be found by fwnode_property_match_string(), because the ACPI
code handling device properties does not regard the single value as a
"list" in that case.
Namely, fwnode_property_match_string() invoked to match a given
string property value first calls fwnode_property_read_string_array()
with the last two arguments equal to NULL and 0, respectively, in
order to count the items in the value of the given property, with the
assumption that this value may be an array. For ACPI fwnodes, that
operation is carried out by acpi_node_prop_read() which calls
acpi_data_prop_read() for this purpose. However, when the return
(val) pointer is NULL, that function only looks for a property whose
value is a package without checking the single-value case at all.
To fix that, make acpi_data_prop_read() check the single-value
case if its return pointer argument is NULL and modify
acpi_data_prop_read_single() handling that case to attempt to
read the value of the property if the return pointer is NULL
and return 1 if that succeeds.
Fixes: 3708184afc ("device property: Move FW type specific functionality to FW specific files")
Reported-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Cc: 4.13+ <stable@vger.kernel.org> # 4.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Replace the ACPI_DEBUG_PRINT() instance in osl.c unrelated to the
ACPICA debug with acpi_handle_debug(), add a pr_fmt() definition
to osl.c and replace direct printk() usage in that file with the
suitable pr_*() calls.
While at it, add a physical address value to the message in
acpi_os_map_iomem() and reword a couple of messages to avoid
using function names in them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rearrange the code in acpi_check_resource_conflict() so as to drop
redundant checks and uneeded local variables from there and modify
the messages printed by that function to be more concise and
hopefully easier to understand.
While at it, replace direct printk() usage with pr_*().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This includes following Thunderbolt/USB4 changes for v5.12 merge
window:
* Start lane initialization after sleep for Thunderbolt 3 compatible
devices
* Add support for de-authorizing PCIe tunnels (software based
connection manager only)
* Add support for new ACPI 6.4 USB4 _OSC
* Allow disabling XDomain protocol
* Add support for new SL5 security level
* Clean up kernel-docs to pass W=1 builds
* A couple of cleanups and minor fixes
All these have been in linux-next without reported issues.
-----BEGIN PGP SIGNATURE-----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=pzr4
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.12 merge window
This includes following Thunderbolt/USB4 changes for v5.12 merge
window:
* Start lane initialization after sleep for Thunderbolt 3 compatible
devices
* Add support for de-authorizing PCIe tunnels (software based
connection manager only)
* Add support for new ACPI 6.4 USB4 _OSC
* Allow disabling XDomain protocol
* Add support for new SL5 security level
* Clean up kernel-docs to pass W=1 builds
* A couple of cleanups and minor fixes
All these have been in linux-next without reported issues.
* tag 'thunderbolt-for-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (27 commits)
thunderbolt: Add support for native USB4 _OSC
ACPI: Add support for native USB4 control _OSC
ACPI: Execute platform _OSC also with query bit clear
thunderbolt: Allow disabling XDomain protocol
thunderbolt: Add support for PCIe tunneling disabled (SL5)
thunderbolt: dma_test: Drop unnecessary include
thunderbolt: Add clarifying comments about USB4 terms router and adapter
thunderbolt: switch: Fix kernel-doc descriptions of non-static functions
thunderbolt: nhi: Fix kernel-doc descriptions of non-static functions
thunderbolt: path: Fix kernel-doc descriptions of non-static functions
thunderbolt: eeprom: Fix kernel-doc descriptions of non-static functions
thunderbolt: ctl: Fix kernel-doc descriptions of non-static functions
thunderbolt: switch: Fix function name in the header
thunderbolt: tunnel: Fix misspelling of 'receive_path'
thunderbolt: icm: Fix a couple of formatting issues
thunderbolt: switch: Demote a bunch of non-conformant kernel-doc headers
thunderbolt: tb: Kernel-doc function headers should document their parameters
thunderbolt: nhi: Demote some non-conformant kernel-doc headers
thunderbolt: xdomain: Fix 'tb_unregister_service_driver()'s 'drv' param
thunderbolt: eeprom: Demote non-conformant kernel-doc headers to standard comment blocks
...
This reverts commit 32cf1a12ca.
The 'exisitng buffer' in this case is the firmware provided table, and
we should not modify that in place. This fixes a crash on arm64 with
initrd table overrides, in which case the DSDT is not mapped with
read/write permissions.
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix a crash when sysfs accesses race 'dimm' driver probe/remove.
- Fix a regression in 'resource' attribute visibility necessary for
mapping badblocks and other physical address interrogations.
- Fix some flexible array warnings
- Expand the unit test infrastructure for non-ACPI platforms
-----BEGIN PGP SIGNATURE-----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=QQRF
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A fix for a crash scenario that has been present since the initial
merge, a minor regression in sysfs attribute visibility, and a fix for
some flexible array warnings.
The bulk of this pull is an update to the libnvdimm unit test
infrastructure to test non-ACPI platforms. Given there is zero
regression risk for test updates, and the tests enable validation of
bits headed towards the next merge window, I saw no reason to hold the
new tests back. Santosh originally submitted this before the v5.11
window opened.
Summary:
- Fix a crash when sysfs accesses race 'dimm' driver probe/remove.
- Fix a regression in 'resource' attribute visibility necessary for
mapping badblocks and other physical address interrogations.
- Fix some flexible array warnings
- Expand the unit test infrastructure for non-ACPI platforms"
* tag 'libnvdimm-fixes-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/dimm: Avoid race between probe and available_slots_show()
ndtest: Add papr health related flags
ndtest: Add nvdimm control functions
ndtest: Add regions and mappings to the test buses
ndtest: Add dimm attributes
ndtest: Add dimms to the two buses
ndtest: Add compatability string to treat it as PAPR family
testing/nvdimm: Add test module for non-nfit platforms
libnvdimm/namespace: Fix visibility of namespace resource attribute
libnvdimm/pmem: Remove unused header
ACPI: NFIT: Fix flexible_array.cocci warnings
Eliminate the following coccicheck warning:
./drivers/acpi/apei/erst.c:691:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the ACPI_DEBUG_PRINT() instances in thermal.c with
acpi_handle_debug() calls and modify the ACPI_THERMAL_TRIPS_EXCEPTION()
macro in there to use acpi_handle_info() internally, which among other
things causes the excessive log level of the messages printed by it to
be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more from thermal.c, drop the no longer needed
ACPI_THERMAL_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, add a pr_fmt() definition to thermal.c, drop the PREFIX
definition from there and replace some pr_warn() calls with pr_info()
or acpi_handle_info() to reduce the excessive log level and (in the
latter case) facilitate easier identification of the message source.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Replace the ACPI_DEBUG_PRINT() instances in acpi_video.c with
acpi_handle_debug() calls and the ACPI_EXCEPTION()/ACPI_ERROR()/
ACPI_WARNING() instances in there with acpi_handle_info() calls,
which among other things causes the excessive log levels of those
messages to be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more from acpi_video.c, drop the no longer needed
ACPI_VIDEO_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, add a pr_fmt() definition to acpi_video.c, replace the
direct printk() invocations in there with acpi_handle_info() or
pr_info() (and reduce the excessive log level where applicable) and
drop the PREFIX sybmbol definition which is not necessary any more
from acpi_video.c.
Also make unrelated janitorial changes to fix up white space and
use ACPI_FAILURE() instead of negating ACPI_SUCCESS().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Replace the ACPI_DEBUG_PRINT() instance in button.c with an
acpi_handle_debug() call, drop the _COMPONENT and ACPI_MODULE_NAME()
definitions that are not used any more, drop the no longer needed
ACPI_BUTTON_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, replace the direct printk() invocations with pr_info()
(that changes the excessive log level for some of them too) and drop
the unneeded PREFIX sybmbol definition from battery.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in battery.c with acpi_handle_debug() and acpi_handle_info() calls,
respectively, which among other things causes the excessive log
level of the messages previously printed via ACPI_EXCEPTION() to
be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more, drop the no longer needed ACPI_BATTERY_COMPONENT
definition from the headers and update the documentation accordingly.
While at it, update the pr_fmt() definition and drop the unneeded
PREFIX sybmbol definition from battery.c. Also adapt the existing
pr_info() calls to the new pr_fmt() definition.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in ac.c with acpi_handle_debug() and acpi_handle_info() calls,
respectively, which among other things causes the excessive log
level of the messages previously printed via ACPI_EXCEPTION() to
be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more, drop the no longer needed ACPI_AC_COMPONENT definition
from the headers and update the documentation accordingly.
While at it, replace the direct printk() invocation with pr_info(),
add a pr_fmt() definition to ac.c and drop the unneeded PREFIX
symbol definition from there.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
After dropping all of the code using ACPI_BUS_COMPONENT drop it
too and modify the example in the documentation using it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace all of the ACPI_DEBUG_PRINT() instances in utils.c with
pr_debug() and acpi_handle_debug(), drop the _COMPONENT and
ACPI_MODULE_NAME() definitions that are not used any more and
replace direct printk() invocations with pr_debug() calls (the log
level in there is way excessive).
Also add a special pr_fmt() definition, but this only affects the
pr_debug() messages mentioned above.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace all of the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in scan.c with acpi_handle_debug() and acpi_handle_info(), respectively,
and drop the _COMPONENT and ACPI_MODULE_NAME() definitions that
are not used any more.
While at it, drop the redundant "Memory allocation error" message
from acpi_add_single_object() and clean up the list of local variables
in that function.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Replace all of the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in bus.c with pr_debug() and pr_info(), respectively, drop the
_COMPONENT and ACPI_MODULE_NAME() definitions that are not used any
more and replace direct printk() invocations with the matching
pr_*() calls (with a couple of exceptions where the log level is
decreased).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the remaining ACPI_DEBUG_PRINT() instances in device_pm.c
with dev_dbg() invocations, drop the _COMPONENT and ACPI_MODULE_NAME()
definitions that are not used any more, and drop the no longer needed
ACPI_POWER_COMPONENT definition from the headers and documentation.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace all of the ACPI_DEBUG_PRINT() instances in power.c with
acpi_handle_debug() or pr_debug(), depending on the context,
drop the _COMPONENT and ACPI_MODULE_NAME() definitions that
are not used any more, and replace the direct invocations of
printk() in there with acpi_handle_info() or pr_info(), depending
on the context.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI 6.4 introduced a new _OSC capability that is used negotiate native
connection manager support. Connection manager is the entity that is
responsible for tunneling over the USB4 fabric. If the platform rejects
the native access then firmware based connection manager is used.
The new _OSC also includes a set of bits that can be used to disable
certain tunnel types such as PCIe for security reasons for instance.
This implements the new USB4 _OSC so that we try to negotiate native
USB4 support if the Thunderbolt/USB4 (CONFIG_USB4) driver is enabled.
Drivers can determine what was negotiated by checking two new variables
exposed in this patch.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The platform _OSC can change the hardware state when query bit is not
set. According to ACPI spec it is recommended that the OS runs _OSC with
query bit set until the platform does not mask any of the capabilities.
Then it should run it with query bit clear in order to actually commit
the changes. Linux has not been doing this for the reasons that there
has not been anything to commit, until now.
The ACPI 6.4 introduced _OSC for USB4 to allow the OS to negotiate
native control over USB4 tunneling. The platform might implement this so
that it only activates the software connection manager path when the OS
calls the _OSC with the query bit clear. Otherwise it may default to the
firmware connection manager, for instance.
For this reason modify the _OSC support so that we first execute it with
query bit set, then use the returned value as base of the features we
want to control and run the _OSC again with query bit clear. This also
follows what Windows is doing.
Also rename the function to better match what it does.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
With the new 2 step scanning process, which defers instantiating some
ACPI-devices based on their _DEP to the second step, the following may
happen:
1. During the first acpi_walk_namespace(acpi_bus_check_add) call
acpi_scan_check_dep() gets called on the Battery ACPI dev handle and
adds one or more deps for this handle to the acpi_dep_list
2. During the first acpi_bus_attach() call one or more of the suppliers of
these deps get their driver attached and
acpi_walk_dep_device_list(supplier_handle) gets called.
At this point acpi_bus_get_device(dep->consumer) get called,
but since the battery has DEPs it has not been instantiated during the
first acpi_walk_namespace(acpi_bus_check_add), so the
acpi_bus_get_device(dep->consumer) call fails.
Before this commit, acpi_walk_dep_device_list() would now continue
*without* removing the acpi_dep_data entry for this supplier,consumer
pair from the acpi_dep_list.
3. During the second acpi_walk_namespace(acpi_bus_check_add) call
an acpi_device gets instantiated for the battery and
acpi_scan_dep_init() gets called to initialize its dep_unmet val.
Before this commit, the dep_unmet count would include DEPs for
suppliers for which acpi_walk_dep_device_list(supplier_handle)
has already been called, so it will never become 0 and the
ACPI battery driver will never get attached / bind.
Fix the ACPI battery driver never binding in this scenario by making
acpi_walk_dep_device_list() always remove matching acpi_dep_data
entries independent of the acpi_bus_get_device(dep->consumer) call
succeeding or not.
Fixes: 71da201f38 ("ACPI: scan: Defer enumeration of devices with _DEP lists")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix the virt_addr_valid() returning true for < PAGE_OFFSET addresses.
- Do not blindly trust the DMA masks from ACPI/IORT.
-----BEGIN PGP SIGNATURE-----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=CBSN
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix the virt_addr_valid() returning true for < PAGE_OFFSET addresses.
- Do not blindly trust the DMA masks from ACPI/IORT.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Do not blindly trust DMA masks from firmware
arm64: Fix kernel address detection of __is_lm_address()
ACPI Firmware Performance Data Table (FPDT) provides information about
firmware performance during system boot, S3 suspend and S3 resume.
Have the kernel parse the FPDT table, and expose the firmware
performance data to userspace as sysfs attributes under
/sys/firmware/acpi/fpdt/.
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After a rmmod thinkpad_acpi, lockdep pointed out this possible deadlock:
Our _show and _store sysfs attr functions get called with the kn->active
lock held for the sysfs attr and then take the profile_lock.
sysfs_remove_group() also takes the kn->active lock for the sysfs attr,
so if we call it with the profile_lock held, then we get an ABBA deadlock.
platform_profile_remove() must only be called by drivers which have
first *successfully* called platform_profile_register(). Anything else
is a driver bug. So the check for cur_profile being set before calling
sysfs_remove_group() is not necessary and it can be dropped.
It is safe to call sysfs_remove_group() without holding the profile_lock
since the attr-group group cannot be re-added until after we clear
cur_profile.
Change platform_profile_remove() to only hold the profile_lock while
clearing the cur_profile, fixing the deadlock.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This message:
acpi PNP0A08:02: _OSC failed (AE_NOT_FOUND); disabling ASPM
is alarming and slightly misleading. Per the PCI Firmware Spec, r3.2, sec
4.5.1, _OSC is required for PCIe hierarchies. If _OSC is absent or fails,
the OS must not attempt to use any of the features defined for _OSC. That
includes native hotplug, native PME, AER, and other things as well as ASPM.
Rephrase the message to:
acpi PNP0A08:02: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
Previous discussion at https://lore.kernel.org/r/20200602223618.GA845676@bjorn-Precision-5520/
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
