veth.sh is a shell script that uses /bin/sh; some distro (Ubuntu for
example) use dash as /bin/sh and in this case the test reports the
following error:
# ./veth.sh: 21: local: -r: bad variable name
# ./veth.sh: 21: local: -r: bad variable name
This happens because dash doesn't support the option "-r" with local.
Moreover, in case of missing bpf object, the script is exiting -1, that
is an illegal number for dash:
exit: Illegal number: -1
Change the script to be compatible both with bash and dash and prevent
the errors above.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the MMCR0 control bit (PMCCEXT) in ISA v3.1, read access to
group B registers is restricted when MMCR0 PMCC=0b00. In other
platforms (like power9), the older behaviour works where group B
PMU SPRs are readable.
Patch creates a selftest which verifies that the test takes a
SIGILL when attempting to read PMU registers via helper function
"dump_ebb_state" for ISA v3.1.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1621950703-1532-3-git-send-email-atrajeev@linux.vnet.ibm.com
The "no_handler_test" in ebb selftests attempts to read the PMU
registers twice via helper function "dump_ebb_state". First dump is
just before closing of event and the second invocation is done after
closing of the event. The original intention of second
dump_ebb_state was to dump the state of registers at the end of
the test when the counters are frozen. But this will be achieved
with the first call itself since sample period is set to low value
and PMU will be frozen by then. Hence patch removes the
dump which was done before closing of the event.
Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1621950703-1532-2-git-send-email-atrajeev@linux.vnet.ibm.com
Extend the enclave to have two operations: ENCL_OP_PUT and ENCL_OP_GET.
ENCL_OP_PUT stores value inside the enclave address space and
ENCL_OP_GET reads it. The internal buffer can be later extended to be
variable size, and allow reclaimer tests.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add EXPECT_EEXIT() macro, which will conditionally print the exception
information, in addition to
EXPECT_EQ(self->run.function, EEXIT);
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Often, it's useful to check whether /proc/self/maps looks sane when
dealing with memory mapped objects, especially when they are JIT'ish
dynamically constructed objects. Therefore, dump "/dev/sgx_enclave"
matching lines from the memory map in FIXTURE_SETUP().
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-06-15
The following pull-request contains BPF updates for your *net* tree.
We've added 5 non-merge commits during the last 11 day(s) which contain
a total of 10 files changed, 115 insertions(+), 16 deletions(-).
The main changes are:
1) Fix marking incorrect umem ring as done in libbpf's
xsk_socket__create_shared() helper, from Kev Jackson.
2) Fix oob leakage under a spectre v1 type confusion
attack, from Daniel Borkmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Migrate to kselftest harness. Use a fixture test with enclave initialized
and de-initialized for each of the existing three tests, in other words:
1. One FIXTURE() for managing the enclave life-cycle.
2. Three TEST_F()'s, one for each test case.
Dump lines of /proc/self/maps matching "sgx" in FIXTURE_SETUP() as this
can be very useful debugging information later on.
Amended commit log:
This migration changes the output of this test. Instead of skipping
the tests if open /dev/sgx_enclave fails, it will run all the tests
and report failures on all of them.
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Rename symbols for better clarity:
* 'eenter' might be confused for directly calling ENCLU[EENTER]. It does
not. It calls into the VDSO, which actually has the EENTER instruction.
* 'sgx_call_vdso' is *only* used for entering the enclave. It's not some
generic SGX call into the VDSO.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patch adds a test for BPF_SK_REUSEPORT_SELECT_OR_MIGRATE and
removes 'static' from settimeo() in network_helpers.c.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210612123224.12525-12-kuniyu@amazon.co.jp
In almost all cases from test_verifier that have been changed in here, we've
had an unreachable path with a load from a register which has an invalid
address on purpose. This was basically to make sure that we never walk this
path and to have the verifier complain if it would otherwise. Change it to
match on the right error for unprivileged given we now test these paths
under speculative execution.
There's one case where we match on exact # of insns_processed. Due to the
extra path, this will of course mismatch on unprivileged. Thus, restrict the
test->insn_processed check to privileged-only.
In one other case, we result in a 'pointer comparison prohibited' error. This
is similarly due to verifying an 'invalid' branch where we end up with a value
pointer on one side of the comparison.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Add hard drop counter check testcase, to make sure netdevsim driver
properly handles the devlink hard drop counters get/set callbacks.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink_trap_drop_packets_get function, as well as test that are
used to verify devlink (hard) dropped stats functionality works.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oliver reported a use case where deleting a VRF device can hang
waiting for the refcnt to drop to 0. The root cause is that the dst
is allocated against the VRF device but cached on the loopback
device.
The use case (added to the selftests) has an implicit VRF crossing
due to the ordering of the FIB rules (lookup local is before the
l3mdev rule, but the problem occurs even if the FIB rules are
re-ordered with local after l3mdev because the VRF table does not
have a default route to terminate the lookup). The end result is
is that the FIB lookup returns the loopback device as the nexthop,
but the ingress device is in a VRF. The mismatch causes the dst
alloc against the VRF device but then cached on the loopback.
The fix is to bring the trick used for IPv6 (see ip6_rt_get_dev_rcu):
pick the dst alloc device based the fib lookup result but with checks
that the result has a nexthop device (e.g., not an unreachable or
prohibit entry).
Fixes: f5a0aab84b ("net: ipv4: dst for local input routes should use l3mdev if relevant")
Reported-by: Oliver Herms <oliver.peter.herms@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test cleanup path for routes usinig nexthop objects before the
reference is taken on the nexthop. Specifically, bad metric for
ipv4 and ipv6 and source routing for ipv6.
Selftests that correspond to the recent bug fix:
821bbf79fe ("ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions")
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Coco Li <lixiaoyan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Covers fundamental tests for debug exceptions. The guest installs and
handle its debug exceptions itself, without KVM_SET_GUEST_DEBUG.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210611011020.3420067-7-ricarkol@google.com
Add the infrastructure needed to enable exception handling in aarch64
selftests. The exception handling defaults to an unhandled-exception
handler which aborts the test, just like x86. These handlers can be
overridden by calling vm_install_exception_handler(vector) or
vm_install_sync_handler(vector, ec). The unhandled exception reporting
from the guest is done using the ucall type introduced in a previous
commit, UCALL_UNHANDLED.
The exception handling code is inspired on kvm-unit-tests.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210611011020.3420067-6-ricarkol@google.com
Move GUEST_ASSERT_EQ to a common header, kvm_util.h, for other
architectures and tests to use. Also modify __GUEST_ASSERT so it can be
reused to implement GUEST_ASSERT_EQ.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210611011020.3420067-5-ricarkol@google.com
x86, the only arch implementing exception handling, reports unhandled
vectors using port IO at a specific port number. This replicates what
ucall already does.
Introduce a new ucall type, UCALL_UNHANDLED, for guests to report
unhandled exceptions. Then replace the x86 unhandled vector exception
reporting to use it instead of port IO. This new ucall type will be
used in the next commits by arm64 to report unhandled vectors as well.
Tested: Forcing a page fault in the ./x86_64/xapic_ipi_test
halter_guest_code() shows this:
$ ./x86_64/xapic_ipi_test
...
Unexpected vectored event in guest (vector:0xe)
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210611011020.3420067-4-ricarkol@google.com
The guest in sync_regs_test does raw ucalls by directly accessing the
ucall IO port. It makes these ucalls without setting %rdi to a `struct
ucall`, which is what a ucall uses to pass messages. The issue is that
if the host did a get_ucall (the receiver side), it would try to access
the `struct ucall` at %rdi=0 which would lead to an error ("No mapping
for vm virtual address, gva: 0x0").
This issue is currently benign as there is no get_ucall in
sync_regs_test; however, that will change in the next commit as it
changes the unhandled exception reporting mechanism to use ucalls. In
that case, every vcpu_run is followed by a get_ucall to check if the
guest is trying to report an unhandled exception.
Fix this in advance by setting %rdi to a UCALL_NONE struct ucall for the
sync_regs_test guest.
Tested with gcc-[8,9,10], and clang-[9,11].
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210611011020.3420067-3-ricarkol@google.com
Rename the vm_handle_exception function to a name that indicates more
clearly that it installs something: vm_install_exception_handler.
Reported-by: kernel test robot <oliver.sang@intel.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210611011020.3420067-2-ricarkol@google.com
Syncookie validation may fail for OoO packets, causing spurious
resets and self-tests failures, so let's force syncookie only
for tests iteration with no OoO.
Fixes: fed61c4b58 ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/198
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Errors like below were produced from test_util.c when compiling the KVM
selftests on my local platform.
lib/test_util.c: In function 'vm_mem_backing_src_alias':
lib/test_util.c:177:12: error: initializer element is not constant
.flag = anon_flags,
^~~~~~~~~~
lib/test_util.c:177:12: note: (near initialization for 'aliases[0].flag')
The reason is that we are using non-const expressions to initialize the
static structure, which will probably trigger a compiling error/warning
on stricter GCC versions. Fix it by converting the two const variables
"anon_flags" and "anon_huge_flags" into more stable macros.
Fixes: b3784bc28c ("KVM: selftests: refactor vm_mem_backing_src_type flags")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20210610085418.35544-1-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
without nested page tables.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDAVpQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNkOgf9F97eFxAdod3/wbW9EbsUPR5bMTLE
+R6Hmvw+yCm/W2cycVGdCSh1BEKNuZN/XfHln2cYVfVr6ndog58A4Y0urFAhTROv
IHs8TCA5biQitoZ716l88ExOitnqJiSmMhGex969+zm1Lb9MQo1KA/zxERlqCi3s
Pfcxb6I8VbD9LEb6NaQdDgQoslJo1tzhe9gGYAYrpMOZujpj1RPeIOZIfeII0MP/
g14/JSar8cXc9QJ6zbiKn8HhpmzGJnaIsyFFL2RMIBlKvxsnpOU6VmisLTL9407o
P246Vq59BM8pdRCVUW9W9hLr2ho8lmi+ZYXASCm+qfn8cLaHyRCqSK56ZQ==
=nW43
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes, including a TLB flush fix that affects processors without
nested page tables"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: fix previous commit for 32-bit builds
kvm: avoid speculation-based attacks from out-of-range memslot accesses
KVM: x86: Unload MMU on guest TLB flush if TDP disabled to force MMU sync
KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message
selftests: kvm: Add support for customized slot0 memory size
KVM: selftests: introduce P47V64 for s390x
KVM: x86: Ensure PV TLB flush tracepoint reflects KVM behavior
KVM: X86: MMU: Use the correct inherited permissions to get shadow page
KVM: LAPIC: Write 0 to TMICT should also cancel vmx-preemption timer
KVM: SVM: Fix SEV SEND_START session length & SEND_UPDATE_DATA query length after commit 238eca821c
There is a bug report on netfilter.org bugzilla pointing to fib
expression dropping ipv6 DAD packets.
Add a test case that demonstrates this problem.
Next patch excludes icmpv6 packets coming from any to linklocal.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is very heavily based on some code from Thomas Gleixner. On a system
without XSAVES, it triggers the WARN_ON():
Bad FPU state detected at copy_kernel_to_fpregs+0x2f/0x40, reinitializing FPU registers.
[ bp: Massage in nitpicks. ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Link: https://lkml.kernel.org/r/20210608144346.234764986@linutronix.de
In the commit referenced below, a check was added to devlink_lib that
asserts the existence of a devlink device referenced by $DEVLINK_DEV.
Unfortunately, several netdevsim tests point DEVLINK_DEV at a device that
does not exist at the time that devlink_lib is sourced. Thus these tests
spuriously fail.
Fix this by introducing an override. By setting DEVLINK_DEV to an empty
string, the user declares their intention to handle DEVLINK_DEV management
on their own.
In all netdevsim tests that use devlink_lib and set DEVLINK_DEV, set
instead an empty DEVLINK_DEV just before sourcing devlink_lib, and set it
to the correct value right afterwards.
Fixes: 557c4d2f78 ("selftests: devlink_lib: add check for devlink device existence")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several tests do not set some ports down as part of their cleanup(),
resulting in IPv6 link-local addresses and associated routes not being
deleted.
These leaks were found using a BPF tool that monitors ASIC resources.
Solve this by setting the ports down at the end of the tests.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To check how many routes are installed in hardware, the test runs "ip
route" and greps for "offload", which includes routes with state
"offload_failed".
Till now, this wrong check was not found because after one failure in
route insertion, the driver moved to "abort" mode, which means that user
cannot try to add more routes.
The previous patch removed the abort mechanism and now failed routes are
counted as offloaded.
Fix this by not considering routes with "offload_failed" flag as
offloaded.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, if rst2man caught errors, then these would be ignored and
the output file would be written anyway. This would allow developers to
introduce regressions in the docs comments in the BPF headers.
Additionally, even if you instruct rst2man to fail out, it will still
write out to the destination target file, so if you ran the tests twice
in a row it would always pass. Use a temporary file for the initial run
to ensure that if rst2man fails out under "--strict" mode, subsequent
runs will not automatically pass.
Tested via ./tools/testing/selftests/bpf/test_doc_build.sh
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210608015756.340385-1-joe@cilium.io
Until commit 39fe2fc966 ("selftests: kvm: make allocation of extra
memory take effect", 2021-05-27), parameter extra_mem_pages was used
only to calculate the page table size for all the memory chunks,
because real memory allocation happened with calls of
vm_userspace_mem_region_add() after vm_create_default().
Commit 39fe2fc966 however changed the meaning of extra_mem_pages to
the size of memory slot 0. This makes the memory allocation more
flexible, but makes it harder to account for the number of
pages needed for the page tables. For example, memslot_perf_test
has a small amount of memory in slot 0 but a lot in other slots,
and adding that memory twice (both in slot 0 and with later
calls to vm_userspace_mem_region_add()) causes an error that
was fixed in commit 000ac42953 ("selftests: kvm: fix overlapping
addresses in memslot_perf_test", 2021-05-29)
Since both uses are sensible, add a new parameter slot0_mem_pages
to vm_create_with_vcpus() and some comments to clarify the meaning of
slot0_mem_pages and extra_mem_pages. With this change,
memslot_perf_test can go back to passing the number of memory
pages as extra_mem_pages.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20210608233816.423958-4-zhenzhong.duan@intel.com>
[Squashed in a single patch and rewrote the commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
s390x can have up to 47bits of physical guest and 64bits of virtual
address bits. Add a new address mode to avoid errors of testcases
going beyond 47bits.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210608123954.10991-1-borntraeger@de.ibm.com>
Fixes: ef4c9f4f65 ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()")
Cc: stable@vger.kernel.org
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test will require /dev/rtc0, the default RTC device, or one
specified by user to run. Since this default RTC is not guaranteed to
exist on all of the devices, so check its existence first, otherwise
skip this test with the kselftest skip code 4.
Without this patch this test will fail like this on a s390x zVM:
$ selftests: timers: rtcpie
$ /dev/rtc0: No such file or directory
not ok 1 selftests: timers: rtcpie # exit=22
With this patch:
$ selftests: timers: rtcpie
$ Default RTC /dev/rtc0 does not exist. Test Skipped!
not ok 9 selftests: timers: rtcpie # SKIP
Fixed up change log so "With this patch" text doesn't get dropped.
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Installed seccomp tests would time out because the "settings" file was
missing. Install both "settings" (needed for proper test execution) and
"config" (needed for informational purposes) with the other test
targets.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Some pseudo-filesystems do not have an explicit splice fops since adding
commit 36e2c7421f ("fs: don't allow splice read/write without explicit ops"),
and now will reject attempts to use splice() in those filesystem paths.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Link: https://lore.kernel.org/lkml/202009181443.C2179FB@keescook/
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This silences a static checker warning due to the unusual macro
construction of EXPECT_*() by adding explicit {}s around the enclosing
while loop.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 7f657d5bf5 ("selftests: tls: add selftests for TLS sockets")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Resctrl test suite accepts command line argument "-t" to specify the
unit tests to run in the test list (e.g., -t mbm,mba,cmt,cat) as
documented in the help.
When calling strtok() to parse the option, the incorrect delimiters
argument ":\t" is used. As a result, passing "-t mbm,mba,cmt,cat" throws
an invalid option error.
Fix this by using delimiters argument "," instead of ":\t" for parsing
of unit tests list. At the same time, remove the unnecessary "spaces"
between the unit tests in help documentation to prevent confusion.
Fixes: 790bf585b0 ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Fixes: 78941183d1 ("selftests/resctrl: Add Cache QoS Monitoring (CQM) selftest")
Fixes: ecdbb911f2 ("selftests/resctrl: Add MBM test")
Fixes: 034c7678dd ("selftests/resctrl: Add README for resctrl tests")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Merge misc fixes from Andrew Morton:
"13 patches.
Subsystems affected by this patch series: mips, mm (kfence, debug,
pagealloc, memory-hotplug, hugetlb, kasan, and hugetlb), init, proc,
lib, ocfs2, and mailmap"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mailmap: use private address for Michel Lespinasse
ocfs2: fix data corruption by fallocate
lib: crc64: fix kernel-doc warning
mm, hugetlb: fix simple resv_huge_pages underflow on UFFDIO_COPY
mm/kasan/init.c: fix doc warning
proc: add .gitignore for proc-subset-pid selftest
hugetlb: pass head page to remove_hugetlb_page()
drivers/base/memory: fix trying offlining memory blocks with memory holes on aarch64
mm/page_alloc: fix counting of free pages after take off from buddy
mm/debug_vm_pgtable: fix alignment for pmd/pud_advanced_tests()
pid: take a reference when initializing `cad_pid`
kfence: use TASK_IDLE when awaiting allocation
Revert "MIPS: make userspace mapping young by default"
This new selftest needs an entry in the .gitignore file otherwise git
will try to track the binary.
Link: https://lkml.kernel.org/r/20210601164305.11776-1-dmatlack@google.com
Fixes: 268af17ada ("selftests: proc: test subset=pid")
Signed-off-by: David Matlack <dmatlack@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
netfilter and wireguard trees.
The bpf vs lockdown+audit fix is the most notable.
Current release - regressions:
- virtio-net: fix page faults and crashes when XDP is enabled
- mlx5e: fix HW timestamping with CQE compression, and make sure they
are only allowed to coexist with capable devices
- stmmac:
- fix kernel panic due to NULL pointer dereference of mdio_bus_data
- fix double clk unprepare when no PHY device is connected
Current release - new code bugs:
- mt76: a few fixes for the recent MT7921 devices and runtime
power management
Previous releases - regressions:
- ice: - track AF_XDP ZC enabled queues in bitmap to fix copy mode Tx
- fix allowing VF to request more/less queues via virtchnl
- correct supported and advertised autoneg by using PHY capabilities
- allow all LLDP packets from PF to Tx
- kbuild: quote OBJCOPY var to avoid a pahole call break the build
Previous releases - always broken:
- bpf, lockdown, audit: fix buggy SELinux lockdown permission checks
- mt76: address the recent FragAttack vulnerabilities not covered
by generic fixes
- ipv6: fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions
- Bluetooth:
- fix the erroneous flush_work() order, to avoid double free
- use correct lock to prevent UAF of hdev object
- nfc: fix NULL ptr dereference in llcp_sock_getname() after failed connect
- ieee802154: multiple fixes to error checking and return values
- igb: fix XDP with PTP enabled
- intel: add correct exception tracing for XDP
- tls: fix use-after-free when TLS offload device goes down and back up
- ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service
- netfilter: nft_ct: skip expectations for confirmed conntrack
- mptcp: fix falling back to TCP in presence of out of order packets
early in connection lifetime
- wireguard: switch from O(n) to a O(1) algorithm for maintaining peers,
fixing stalls and a large memory leak in the process
Misc:
- devlink: correct VIRTUAL port to not have phys_port attributes
- Bluetooth: fix VIRTIO_ID_BT assigned number
- net: return the correct errno code ENOBUF -> ENOMEM
- wireguard:
- peer: allocate in kmem_cache saving 25% on peer memory
- do not use -O3
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sNP5
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from bpf, wireless, netfilter and
wireguard trees.
The bpf vs lockdown+audit fix is the most notable.
Things haven't slowed down just yet, both in terms of regressions in
current release and largish fixes for older code, but we usually see a
slowdown only after -rc5.
Current release - regressions:
- virtio-net: fix page faults and crashes when XDP is enabled
- mlx5e: fix HW timestamping with CQE compression, and make sure they
are only allowed to coexist with capable devices
- stmmac:
- fix kernel panic due to NULL pointer dereference of
mdio_bus_data
- fix double clk unprepare when no PHY device is connected
Current release - new code bugs:
- mt76: a few fixes for the recent MT7921 devices and runtime power
management
Previous releases - regressions:
- ice:
- track AF_XDP ZC enabled queues in bitmap to fix copy mode Tx
- fix allowing VF to request more/less queues via virtchnl
- correct supported and advertised autoneg by using PHY
capabilities
- allow all LLDP packets from PF to Tx
- kbuild: quote OBJCOPY var to avoid a pahole call break the build
Previous releases - always broken:
- bpf, lockdown, audit: fix buggy SELinux lockdown permission checks
- mt76: address the recent FragAttack vulnerabilities not covered by
generic fixes
- ipv6: fix KASAN: slab-out-of-bounds Read in
fib6_nh_flush_exceptions
- Bluetooth:
- fix the erroneous flush_work() order, to avoid double free
- use correct lock to prevent UAF of hdev object
- nfc: fix NULL ptr dereference in llcp_sock_getname() after failed
connect
- ieee802154: multiple fixes to error checking and return values
- igb: fix XDP with PTP enabled
- intel: add correct exception tracing for XDP
- tls: fix use-after-free when TLS offload device goes down and back
up
- ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service
- netfilter: nft_ct: skip expectations for confirmed conntrack
- mptcp: fix falling back to TCP in presence of out of order packets
early in connection lifetime
- wireguard: switch from O(n) to a O(1) algorithm for maintaining
peers, fixing stalls and a large memory leak in the process
Misc:
- devlink: correct VIRTUAL port to not have phys_port attributes
- Bluetooth: fix VIRTIO_ID_BT assigned number
- net: return the correct errno code ENOBUF -> ENOMEM
- wireguard:
- peer: allocate in kmem_cache saving 25% on peer memory
- do not use -O3"
* tag 'net-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
cxgb4: avoid link re-train during TC-MQPRIO configuration
sch_htb: fix refcount leak in htb_parent_to_leaf_offload
wireguard: allowedips: free empty intermediate nodes when removing single node
wireguard: allowedips: allocate nodes in kmem_cache
wireguard: allowedips: remove nodes in O(1)
wireguard: allowedips: initialize list head in selftest
wireguard: peer: allocate in kmem_cache
wireguard: use synchronize_net rather than synchronize_rcu
wireguard: do not use -O3
wireguard: selftests: make sure rp_filter is disabled on vethc
wireguard: selftests: remove old conntrack kconfig value
virtchnl: Add missing padding to virtchnl_proto_hdrs
ice: Allow all LLDP packets from PF to Tx
ice: report supported and advertised autoneg using PHY capabilities
ice: handle the VF VSI rebuild failure
ice: Fix VFR issues for AVF drivers that expect ATQLEN cleared
ice: Fix allowing VF to request more/less queues via virtchnl
virtio-net: fix for skb_over_panic inside big mode
ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions
fib: Return the correct errno code
...
Some distros may enable strict rp_filter by default, which will prevent
vethc from receiving the packets with an unrouteable reverse path address.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On recent kernels, this config symbol is no longer used.
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This extends the existing setsockopt test case to also check for cmsg
timestamps.
mptcp_connect will abort/fail if the setockopt was passed but the
timestamp cmsg isn't present after successful recvmsg().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When xdp_redirect_multi test binary was added recently, it wasn't added to
.gitignore. Fix that.
Fixes: d232924762 ("selftests/bpf: Add xdp_redirect_multi test")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210603004026.2698513-5-andrii@kernel.org
Test verifies that netdevsim correctly implements devlink ops callbacks
that set node as a parent of devlink leaf or node rate object.
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test verifies that it is possible to create, delete and set min/max tx
rate of devlink rate node on netdevsim VF.
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test verifies that netdevsim VFs can set and retrieve shared/max tx
rate through new devlink API.
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test verifies that all netdevsim VF ports have rate leaf object created
by default.
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because explicitly being set, the priority 0 should appear
in the output.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dump vlan priority only if it has been previously set.
Fix the tests accordingly.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests to verify that MOUNT_ATTR_NOSYMFOLLOW is honored.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mattias Nissler <mnissler@chromium.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <zwisler@google.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
* Another state update on exit to userspace fix
* Prevent the creation of mixed 32/64 VMs
* Fix regression with irqbypass not restarting the guest on failed connect
* Fix regression with debug register decoding resulting in overlapping access
* Commit exception state on exit to usrspace
* Fix the MMU notifier return values
* Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
* fix guest missed wakeup with assigned devices
* fix WARN reported by syzkaller
* do not use BIT() in UAPI headers
* make the kvm_amd.avic parameter bool
PPC fixes:
* make halt polling heuristics consistent with other architectures
selftests:
* various fixes
* new performance selftest memslot_perf_test
* test UFFD minor faults in demand_paging_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCyF0MUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOHSgf/Q4Hm5e12Bj2xJy6A+iShnrbbT8PW
hcIIOA7zGWXfjVYcBV7anbj7CcpzfIz0otcRBABa5mkhj+fb3YmPEb0EzCPi4Hru
zxpcpB2w7W7WtUOIKe2EmaT+4Pk6/iLcfr8UMHMqx460akE9OmIg10QNWai3My/3
RIOeakSckBI9e/1TQZbxH66dsLwCT0lLco7i7AWHdFxkzUQyoA34HX5pczOCBsO5
3nXH+/txnRVhqlcyzWLVVGVzFqmpHtBqkIInDOXfUqIoxo/gOhOgF1QdMUEKomxn
5ZFXlL5IXNtr+7yiI67iHX7CWkGZE9oJ04TgPHn6LR6wRnVvc3JInzcB5Q==
=ollO
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs
- Fix regression with irqbypass not restarting the guest on failed
connect
- Fix regression with debug register decoding resulting in
overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
- fix guest missed wakeup with assigned devices
- fix WARN reported by syzkaller
- do not use BIT() in UAPI headers
- make the kvm_amd.avic parameter bool
PPC fixes:
- make halt polling heuristics consistent with other architectures
selftests:
- various fixes
- new performance selftest memslot_perf_test
- test UFFD minor faults in demand_paging_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
KVM: x86/mmu: Fix comment mentioning skip_4k
KVM: VMX: update vcpu posted-interrupt descriptor when assigning device
KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK
KVM: x86: add start_assignment hook to kvm_x86_ops
KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch
selftests: kvm: do only 1 memslot_perf_test run by default
KVM: X86: Use _BITUL() macro in UAPI headers
KVM: selftests: add shared hugetlbfs backing source type
KVM: selftests: allow using UFFD minor faults for demand paging
KVM: selftests: create alias mappings when using shared memory
KVM: selftests: add shmem backing source type
KVM: selftests: refactor vm_mem_backing_src_type flags
KVM: selftests: allow different backing source types
KVM: selftests: compute correct demand paging size
KVM: selftests: simplify setup_demand_paging error handling
KVM: selftests: Print a message if /dev/kvm is missing
...
vm_create allocates memory and maps it close to GPA. This memory
is separate from what is allocated in subsequent calls to
vm_userspace_mem_region_add, so it is incorrect to pass the
test memory size to vm_create_default. Just pass a small
fixed amount of memory which can be used later for page table,
otherwise GPAs are already allocated at MEM_GPA and the
test aborts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous commit noted that we can have fallback
scenario due to OoO (or packet drop). Update the self-tests
accordingly
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
LLVM upstream commit https://reviews.llvm.org/D102712 made some changes
to bpf relocations to make them llvm linker lld friendly. The scope of
existing relocations R_BPF_64_{64,32} is narrowed and new relocations
R_BPF_64_{ABS32,ABS64,NODYLD32} are introduced.
Let us add some documentation about llvm bpf relocations so people can
understand how to resolve them properly in their respective tools.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210526152457.335210-1-yhs@fb.com
This lets us run the demand paging test on top of a shared
hugetlbfs-backed area. The "shared" is key, as this allows us to
exercise userfaultfd minor faults on hugetlbfs.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-11-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
UFFD handling of MINOR faults is a new feature whose use case is to
speed up demand paging (compared to MISSING faults). So, it's
interesting to let this selftest exercise this new mode.
Modify the demand paging test to have the option of using UFFD minor
faults, as opposed to missing faults. Now, when turning on userfaultfd
with '-u', the desired mode has to be specified ("MISSING" or "MINOR").
If we're in minor mode, before registering, prefault via the *alias*.
This way, the guest will trigger minor faults, instead of missing
faults, and we can UFFDIO_CONTINUE to resolve them.
Modify the page fault handler function to use the right ioctl depending
on the mode we're running in. In MINOR mode, use UFFDIO_CONTINUE.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-10-axelrasmussen@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a memory region is added with a src_type specifying that it should
use some kind of shared memory, also create an alias mapping to the same
underlying physical pages.
And, add an API so tests can get access to these alias addresses.
Basically, for a guest physical address, let us look up the analogous
host *alias* address.
In a future commit, we'll modify the demand paging test to take
advantage of this to exercise UFFD minor faults. The idea is, we
pre-fault the underlying pages *via the alias*. When the *guest*
faults, it gets a "minor" fault (PTEs don't exist yet, but a page is
already in the page cache). Then, the userfaultfd theads can handle the
fault: they could potentially modify the underlying memory *via the
alias* if they wanted to, and then they install the PTEs and let the
guest carry on via a UFFDIO_CONTINUE ioctl.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-9-axelrasmussen@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This lets us run the demand paging test on top of a shmem-backed area.
In follow-up commits, we'll 1) leverage this new capability to create an
alias mapping, and then 2) use the alias mapping to exercise UFFD minor
faults.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-8-axelrasmussen@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Each struct vm_mem_backing_src_alias has a flags field, which denotes
the flags used to mmap() an area of that type. Previously, this field
never included MAP_PRIVATE | MAP_ANONYMOUS, because
vm_userspace_mem_region_add assumed that *all* types would always use
those flags, and so it hardcoded them.
In a follow-up commit, we'll add a new type: shmem. Areas of this type
must not have MAP_PRIVATE | MAP_ANONYMOUS, and instead they must have
MAP_SHARED.
So, refactor things. Make it so that the flags field of
struct vm_mem_backing_src_alias really is a complete set of flags, and
don't add in any extras in vm_userspace_mem_region_add. This will let us
easily tack on shmem.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-7-axelrasmussen@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an argument which lets us specify a different backing memory type
for the test. The default is just to use anonymous, matching existing
behavior.
This is in preparation for testing UFFD minor faults. For that, we'll
need to use a new backing memory type which is setup with MAP_SHARED.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-6-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a preparatory commit needed before we can use different kinds of
backing pages for guest memory.
Previously, we used perf_test_args.host_page_size, which is the host's
native page size (commonly 4K). For VM_MEM_SRC_ANONYMOUS this turns out
to be okay, but in a follow-up commit we want to allow using different
kinds of backing memory.
Take VM_MEM_SRC_ANONYMOUS_HUGETLB for example. Without this change, if
we used that backing page type, when we issued a UFFDIO_COPY ioctl we'd
only do so with 4K, rather than the full 2M of a backing hugepage. In
this case, UFFDIO_COPY returns -EINVAL (__mcopy_atomic_hugetlb checks
the size).
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-5-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A small cleanup. Our caller writes:
r = setup_demand_paging(...);
if (r < 0) exit(-r);
Since we're just going to exit anyway, instead of returning an error we
can just re-use TEST_ASSERT. This makes the caller simpler, as well as
the function itself - no need to write our branches, etc.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-3-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a KVM selftest is run on a machine without /dev/kvm, it will exit
silently. Make it easy to tell what's happening by printing an error
message.
Opportunistically consolidate all codepaths that open /dev/kvm into a
single function so they all print the same message.
This slightly changes the semantics of vm_is_unrestricted_guest() by
changing a TEST_ASSERT() to exit(KSFT_SKIP). However
vm_is_unrestricted_guest() is only called in one place
(x86_64/mmio_warning_test.c) and that is to determine if the test should
be skipped or not.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210511202120.1371800-1-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some trivial fixes I found while touching related code in this series,
factored out into a separate commit for easier reviewing:
- s/gor/got/ and add a newline in demand_paging_test.c
- s/backing_src/src_type/ in a comment to be consistent with the real
function signature in kvm_util.c
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-2-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If /dev/kvm is not available then hardware_disable_test will hang
indefinitely because the child process exits before posting to the
semaphore for which the parent is waiting.
Fix this by making the parent periodically check if the child has
exited. We have to be careful to forward the child's exit status to
preserve a KSFT_SKIP status.
I considered just checking for /dev/kvm before creating the child
process, but there are so many other reasons why the child could exit
early that it seemed better to handle that as general case.
Tested:
$ ./hardware_disable_test
/dev/kvm not available, skipping test
$ echo $?
4
$ modprobe kvm_intel
$ ./hardware_disable_test
$ echo $?
0
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210514230521.2608768-1-dmatlack@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to CPUID.0DH.0H this entry depends on the vCPU's XCR0 register
and IA32_XSS MSR. Since this test does not control for either before
assigning the vCPU's CPUID, these entries will not necessarily match
the supported CPUID exposed by KVM.
This fixes get_cpuid_test on Cascade Lake CPUs.
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210519211345.3944063-1-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vm_get_max_gfn() casts vm->max_gfn from a uint64_t to an unsigned int,
which causes the upper 32-bits of the max_gfn to get truncated.
Nobody noticed until now likely because vm_get_max_gfn() is only used
as a mechanism to create a memslot in an unused region of the guest
physical address space (the top), and the top of the 32-bit physical
address space was always good enough.
This fix reveals a bug in memslot_modification_stress_test which was
trying to create a dummy memslot past the end of guest physical memory.
Fix that by moving the dummy memslot lower.
Fixes: 52200d0d94 ("KVM: selftests: Remove duplicate guest mode handling")
Reviewed-by: Venkatesh Srinivas <venkateshs@chromium.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210521173828.1180619-1-dmatlack@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This benchmark contains the following tests:
* Map test, where the host unmaps guest memory while the guest writes to
it (maps it).
The test is designed in a way to make the unmap operation on the host
take a negligible amount of time in comparison with the mapping
operation in the guest.
The test area is actually split in two: the first half is being mapped
by the guest while the second half in being unmapped by the host.
Then a guest <-> host sync happens and the areas are reversed.
* Unmap test which is broadly similar to the above map test, but it is
designed in an opposite way: to make the mapping operation in the guest
take a negligible amount of time in comparison with the unmap operation
on the host.
This test is available in two variants: with per-page unmap operation
or a chunked one (using 2 MiB chunk size).
* Move active area test which involves moving the last (highest gfn)
memslot a bit back and forth on the host while the guest is
concurrently writing around the area being moved (including over the
moved memslot).
* Move inactive area test which is similar to the previous move active
area test, but now guest writes all happen outside of the area being
moved.
* Read / write test in which the guest writes to the beginning of each
page of the test area while the host writes to the middle of each such
page.
Then each side checks the values the other side has written.
This particular test is not expected to give different results depending
on particular memslots implementation, it is meant as a rough sanity
check and to provide insight on the spread of test results expected.
Each test performs its operation in a loop until a test period ends
(this is 5 seconds by default, but it is configurable).
Then the total count of loops done is divided by the actual elapsed
time to give the test result.
The tests have a configurable memslot cap with the "-s" test option, by
default the system maximum is used.
Each test is repeated a particular number of times (by default 20
times), the best result achieved is printed.
The test memory area is divided equally between memslots, the reminder
is added to the last memslot.
The test area size does not depend on the number of memslots in use.
The tests also measure the time that it took to add all these memslots.
The best result from the tests that use the whole test area is printed
after all the requested tests are done.
In general, these tests are designed to use as much memory as possible
(within reason) while still doing 100+ loops even on high memslot counts
with the default test length.
Increasing the test runtime makes it increasingly more likely that some
event will happen on the system during the test run, which might lower
the test result.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <8d31bb3d92bc8fa33a9756fa802ee14266ab994e.1618253574.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The KVM selftest framework was using a simple list for keeping track of
the memslots currently in use.
This resulted in lookups and adding a single memslot being O(n), the
later due to linear scanning of the existing memslot set to check for
the presence of any conflicting entries.
Before this change, benchmarking high count of memslots was more or less
impossible as pretty much all the benchmark time was spent in the
selftest framework code.
We can simply use a rbtree for keeping track of both of gfn and hva.
We don't need an interval tree for hva here as we can't have overlapping
memslots because we allocate a completely new memory chunk for each new
memslot.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <b12749d47ee860468240cf027412c91b76dbe3db.1618253574.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vm_vaddr_alloc() sets up GVA to GPA mapping page by page; therefore, GPAs
may not be continuous if same memslot is used for data and page table allocation.
kvm_vm_elf_load() however expects a continuous range of HVAs (and thus GPAs)
because it does not try to read file data page by page. Fix this mismatch
by allocating memory in one step.
Reported-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The extra memory pages is missed to be allocated during VM creating.
perf_test_util and kvm_page_table_test use it to alloc extra memory
currently.
Fix it by adding extra_mem_pages to the total memory calculation before
allocate.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20210512043107.30076-1-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
can and wireless trees. Notably including fixes for the recently
announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
touching some core parts of the stack, too, but nothing hair-raising.
Current release - regressions:
- tipc: make node link identity publish thread safe
- dsa: felix: re-enable TAS guard band mode
- stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()
- stmmac: fix system hang if change mac address after interface ifdown
Current release - new code bugs:
- mptcp: avoid OOB access in setsockopt()
- bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers
- ethtool: stats: fix a copy-paste error - init correct array size
Previous releases - regressions:
- sched: fix packet stuck problem for lockless qdisc
- net: really orphan skbs tied to closing sk
- mlx4: fix EEPROM dump support
- bpf: fix alu32 const subreg bound tracking on bitwise operations
- bpf: fix mask direction swap upon off reg sign change
- bpf, offload: reorder offload callback 'prepare' in verifier
- stmmac: Fix MAC WoL not working if PHY does not support WoL
- packetmmap: fix only tx timestamp on request
- tipc: skb_linearize the head skb when reassembling msgs
Previous releases - always broken:
- mac80211: address recent "FragAttacks" vulnerabilities
- mac80211: do not accept/forward invalid EAPOL frames
- mptcp: avoid potential error message floods
- bpf, ringbuf: deny reserve of buffers larger than ringbuf to prevent
out of buffer writes
- bpf: forbid trampoline attach for functions with variable arguments
- bpf: add deny list of functions to prevent inf recursion of tracing
programs
- tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT
- can: isotp: prevent race between isotp_bind() and isotp_setsockopt()
- netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
fallback to non-AVX2 version
Misc:
- bpf: add kconfig knob for disabling unpriv bpf by default
-----BEGIN PGP SIGNATURE-----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=peMK
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc4, including fixes from bpf, netfilter,
can and wireless trees. Notably including fixes for the recently
announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
touching some core parts of the stack, too, but nothing hair-raising.
Current release - regressions:
- tipc: make node link identity publish thread safe
- dsa: felix: re-enable TAS guard band mode
- stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()
- stmmac: fix system hang if change mac address after interface
ifdown
Current release - new code bugs:
- mptcp: avoid OOB access in setsockopt()
- bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers
- ethtool: stats: fix a copy-paste error - init correct array size
Previous releases - regressions:
- sched: fix packet stuck problem for lockless qdisc
- net: really orphan skbs tied to closing sk
- mlx4: fix EEPROM dump support
- bpf: fix alu32 const subreg bound tracking on bitwise operations
- bpf: fix mask direction swap upon off reg sign change
- bpf, offload: reorder offload callback 'prepare' in verifier
- stmmac: Fix MAC WoL not working if PHY does not support WoL
- packetmmap: fix only tx timestamp on request
- tipc: skb_linearize the head skb when reassembling msgs
Previous releases - always broken:
- mac80211: address recent "FragAttacks" vulnerabilities
- mac80211: do not accept/forward invalid EAPOL frames
- mptcp: avoid potential error message floods
- bpf, ringbuf: deny reserve of buffers larger than ringbuf to
prevent out of buffer writes
- bpf: forbid trampoline attach for functions with variable arguments
- bpf: add deny list of functions to prevent inf recursion of tracing
programs
- tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT
- can: isotp: prevent race between isotp_bind() and
isotp_setsockopt()
- netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
fallback to non-AVX2 version
Misc:
- bpf: add kconfig knob for disabling unpriv bpf by default"
* tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits)
net: phy: Document phydev::dev_flags bits allocation
mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
mptcp: avoid error message on infinite mapping
mptcp: drop unconditional pr_warn on bad opt
mptcp: avoid OOB access in setsockopt()
nfp: update maintainer and mailing list addresses
net: mvpp2: add buffer header handling in RX
bnx2x: Fix missing error code in bnx2x_iov_init_one()
net: zero-initialize tc skb extension on allocation
net: hns: Fix kernel-doc
sctp: fix the proc_handler for sysctl encap_port
sctp: add the missing setting for asoc encap_port
bpf, selftests: Adjust few selftest result_unpriv outcomes
bpf: No need to simulate speculative domain for immediates
bpf: Fix mask direction swap upon off reg sign change
bpf: Wrap aux data inside bpf_sanitize_info container
bpf: Fix BPF_LSM kconfig symbol dependency
selftests/bpf: Add test for l3 use of bpf_redirect_peer
bpftool: Add sock_release help info for cgroup attach/prog load command
net: dsa: microchip: enable phy errata workaround on 9567
...
These macros are convenient wrappers around the bpf_seq_printf and
bpf_snprintf helpers. They are currently provided by bpf_tracing.h which
targets low level tracing primitives. bpf_helpers.h is a better fit.
The __bpf_narg and __bpf_apply are needed in both files and provided
twice. __bpf_empty isn't used anywhere and is removed from bpf_tracing.h
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210526164643.2881368-1-revest@chromium.org
Add a bpf selftest for new helper xdp_redirect_map_multi(). In this
test there are 3 forward groups and 1 exclude group. The test will
redirect each interface's packets to all the interfaces in the forward
group, and exclude the interface in exclude map.
Two maps (DEVMAP, DEVMAP_HASH) and two xdp modes (generic, drive) will
be tested. XDP egress program will also be tested by setting pkt src MAC
to egress interface's MAC address.
For more test details, you can find it in the test script. Here is
the test result.
]# time ./test_xdp_redirect_multi.sh
Pass: xdpgeneric arp(F_BROADCAST) ns1-1
Pass: xdpgeneric arp(F_BROADCAST) ns1-2
Pass: xdpgeneric arp(F_BROADCAST) ns1-3
Pass: xdpgeneric IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-1
Pass: xdpgeneric IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-2
Pass: xdpgeneric IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-3
Pass: xdpgeneric IPv6 (no flags) ns1-1
Pass: xdpgeneric IPv6 (no flags) ns1-2
Pass: xdpdrv arp(F_BROADCAST) ns1-1
Pass: xdpdrv arp(F_BROADCAST) ns1-2
Pass: xdpdrv arp(F_BROADCAST) ns1-3
Pass: xdpdrv IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-1
Pass: xdpdrv IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-2
Pass: xdpdrv IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-3
Pass: xdpdrv IPv6 (no flags) ns1-1
Pass: xdpdrv IPv6 (no flags) ns1-2
Pass: xdpegress mac ns1-2
Pass: xdpegress mac ns1-3
Summary: PASS 18, FAIL 0
real 1m18.321s
user 0m0.123s
sys 0m0.350s
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210519090747.1655268-5-liuhangbin@gmail.com
Turn ony libbpf 1.0 mode. Fix all the explicit IS_ERR checks that now will be
broken because libbpf returns NULL on error (and sets errno). Fix
ASSERT_OK_PTR and ASSERT_ERR_PTR to work for both old mode and new modes and
use them throughout selftests. This is trivial to do by using
libbpf_get_error() API that all libbpf users are supposed to use, instead of
IS_ERR checks.
A bunch of checks also did explicit -1 comparison for various fd-returning
APIs. Such checks are replaced with >= 0 or < 0 cases.
There were also few misuses of bpf_object__find_map_by_name() in test_maps.
Those are fixed in this patch as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-3-andrii@kernel.org
Daniel Borkmann says:
====================
pull-request: bpf 2021-05-26
The following pull-request contains BPF updates for your *net* tree.
We've added 14 non-merge commits during the last 14 day(s) which contain
a total of 17 files changed, 513 insertions(+), 231 deletions(-).
The main changes are:
1) Fix bpf_skb_change_head() helper to reset mac_len, from Jussi Maki.
2) Fix masking direction swap upon off-reg sign change, from Daniel Borkmann.
3) Fix BPF offloads in verifier by reordering driver callback, from Yinjun Zhang.
4) BPF selftest for ringbuf mmap ro/rw restrictions, from Andrii Nakryiko.
5) Follow-up fixes to nested bprintf per-cpu buffers, from Florent Revest.
6) Fix bpftool sock_release attach point help info, from Liu Jian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Given we don't need to simulate the speculative domain for registers with
immediates anymore since the verifier uses direct imm-based rewrites instead
of having to mask, we can also lift a few cases that were previously rejected.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Add a test case for using bpf_skb_change_head() in combination with
bpf_redirect_peer() to redirect a packet from a L3 device to veth and back.
The test uses a BPF program that adds L2 headers to the packet coming
from a L3 device and then calls bpf_redirect_peer() to redirect the packet
to a veth device. The test fails as skb->mac_len is not set properly and
thus the ethernet headers are not properly skb_pull'd in cls_bpf_classify(),
causing tcp_v4_rcv() to point the TCP header into middle of the IP header.
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210525102955.2811090-1-joamaki@gmail.com
Add bpf selftests and extend existing ones for a new function
bpf_lookup_and_delete_elem() for (percpu) hash and (percpu) LRU hash map
types.
In test_lru_map and test_maps we add an element, lookup_and_delete it,
then check whether it's deleted.
The newly added lookup_and_delete prog tests practically do the same
thing but additionally use a BPF program to change the value of the
element for LRU maps.
Signed-off-by: Denis Salopek <denis.salopek@sartura.hr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/d30d3e0060c1f750e133579623cf1c60ff58f3d9.1620763117.git.denis.salopek@sartura.hr
the patch that fixed an endless loop in_fq_pie_init() was not considering
that 65535 is a valid class id. The correct bugfix for this infinite loop
is to change 'idx' to become an u32, like Colin proposed in the past [1].
Fix this as follows:
- restore 65536 as maximum possible values of 'flows_cnt'
- use u32 'idx' when iterating on 'q->flows'
- fix the TDC selftest
This reverts commit bb2f930d6d.
[1] https://lore.kernel.org/netdev/20210407163808.499027-1-colin.king@canonical.com/
CC: Colin Ian King <colin.king@canonical.com>
CC: stable@vger.kernel.org
Fixes: bb2f930d6d ("net/sched: fix infinite loop in sch_fq_pie")
Fixes: ec97ecf1eb ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix breakage of strace (and other ptracers etc.) when using the new scv ABI (Power9 or
later with glibc >= 2.33).
Fix early_ioremap() on 64-bit, which broke booting on some machines.
Thanks to: Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, Christophe Leroy.
-----BEGIN PGP SIGNATURE-----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=qeQq
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix breakage of strace (and other ptracers etc.) when using the new
scv ABI (Power9 or later with glibc >= 2.33).
- Fix early_ioremap() on 64-bit, which broke booting on some machines.
Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and
Christophe Leroy.
* tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls
powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls
powerpc: Fix early setup to make early_ioremap() work
Clean up the following includecheck warning:
./tools/testing/selftests/powerpc/tm/tm-vmx-unavail.c: pthread.h is
included more than once.
No functional change.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1620903820-68213-1-git-send-email-jiapeng.chong@linux.alibaba.com
Fix the link error by adding '-static':
gcc -Wall -Wl,-z,max-page-size=0x1000 -pie load_address.c -o /home/yang/linux/tools/testing/selftests/exec/load_address_4096
/usr/bin/ld: /tmp/ccopEGun.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `stderr@@GLIBC_2.17' which may bind externally can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: /tmp/ccopEGun.o(.text+0x158): unresolvable R_AARCH64_ADR_PREL_PG_HI21 relocation against symbol `stderr@@GLIBC_2.17'
/usr/bin/ld: final link failed: bad value
collect2: error: ld returned 1 exit status
make: *** [Makefile:25: tools/testing/selftests/exec/load_address_4096] Error 1
Link: https://lkml.kernel.org/r/20210514092422.2367367-1-yangyingliang@huawei.com
Fixes: 206e22f019 ("tools/testing/selftests: add self-test for verifying load alignment")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Chris Kennelly <ckennelly@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull siginfo fix from Eric Biederman:
"During the merge window an issue with si_perf and the siginfo ABI came
up. The alpha and sparc siginfo structure layout had changed with the
addition of SIGTRAP TRAP_PERF and the new field si_perf.
The reason only alpha and sparc were affected is that they are the
only architectures that use si_trapno.
Looking deeper it was discovered that si_trapno is used for only a few
select signals on alpha and sparc, and that none of the other
_sigfault fields past si_addr are used at all. Which means technically
no regression on alpha and sparc.
While the alignment concerns might be dismissed the abuse of si_errno
by SIGTRAP TRAP_PERF does have the potential to cause regressions in
existing userspace.
While we still have time before userspace starts using and depending
on the new definition siginfo for SIGTRAP TRAP_PERF this set of
changes cleans up siginfo_t.
- The si_trapno field is demoted from magic alpha and sparc status
and made an ordinary union member of the _sigfault member of
siginfo_t. Without moving it of course.
- si_perf is replaced with si_perf_data and si_perf_type ending the
abuse of si_errno.
- Unnecessary additions to signalfd_siginfo are removed"
* 'for-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signalfd: Remove SIL_PERF_EVENT fields from signalfd_siginfo
signal: Deliver all of the siginfo perf data in _perf
signal: Factor force_sig_perf out of perf_sigtrap
signal: Implement SIL_FAULT_TRAPNO
siginfo: Move si_trapno inside the union inside _si_fault
When there is no devlink device, the following command will return:
$ devlink -j dev show
{dev:{}}
This will cause IndexError when trying to access the first element
in dev of this json dataset. Use the kselftest framework skip code
to skip this test in this case.
Example output with this change:
# selftests: net: devlink_port_split.py
# no devlink device was found, test skipped
ok 7 selftests: net: devlink_port_split.py # SKIP
Link: https://bugs.launchpad.net/bugs/1928889
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend ringbuf selftest to validate read/write and read-only restrictions on
memory mapping consumer/producer/data pages. Ensure no "escalations" from
PROT_READ to PROT_WRITE/PROT_EXEC is allowed. And test that mremap() fails to
expand mmap()'ed area.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210514180726.843157-1-andrii@kernel.org
Both IFINDEX_SRC and IFINDEX_DST are set from the userspace
and it won't work once bpf merges with bpf-next.
Fixes: 096eccdef0 ("selftests/bpf: Rewrite test_tc_redirect.sh as prog_tests/tc_redirect.c")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210514170528.3750250-1-sdf@google.com
Building the nci test suite produces a binary, nci_dev, that git then
tries to track. Add a .gitignore file to tell git to ignore this binary.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sc and scv 0 system calls have different ABI conventions, and
ptracers need to know which system call type is being used if they want
to look at the syscall registers.
Document that pt_regs.trap can be used for this, and fix one in-tree user
to work with scv 0 syscalls.
Fixes: 7fa95f9ada ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: "Dmitry V. Levin" <ldv@altlinux.org>
Suggested-by: "Dmitry V. Levin" <ldv@altlinux.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210520111931.2597127-1-npiggin@gmail.com
Add tests running under ptrace for syscall_numbering_64. ptrace stopping on
syscall entry and possibly modifying the syscall number (regs.orig_rax) or
the default return value (regs.rax) can have different results than the
normal system call path.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210518191303.4135296-4-hpa@zytor.com
Reduce some boiler plate in printing and indenting messages.
This makes it easier to produce clean status output.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210518191303.4135296-3-hpa@zytor.com
Update the syscall_numbering_64 selftest to reflect that a system call is
to be extended from 32 bits. Add a mix of tests for valid and invalid
system calls in 64-bit and x32 space.
Use an explicit system call instruction, because the glibc syscall()
wrapper might intercept instructions, extend the system call number
independently, or anything similar.
Use long long instead of long to make it possible to compile this test
on x32 as well as 64 bits.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210518191303.4135296-2-hpa@zytor.com
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-05-19
The following pull-request contains BPF updates for your *net-next* tree.
We've added 43 non-merge commits during the last 11 day(s) which contain
a total of 74 files changed, 3717 insertions(+), 578 deletions(-).
The main changes are:
1) syscall program type, fd array, and light skeleton, from Alexei.
2) Stop emitting static variables in skeleton, from Andrii.
3) Low level tc-bpf api, from Kumar.
4) Reduce verifier kmalloc/kfree churn, from Lorenz.
====================
Adds a wrapper shell script for the test_scanf module.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210514161206.30821-4-rf@opensource.cirrus.com
The test measures the kernel's signal delivery with different (enough vs.
insufficient) stack sizes.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20210518200320.17239-7-chang.seok.bae@intel.com
The SIGSTKSZ constant may not represent enough stack size in some
architectures as the hardware state size grows.
Use getauxval(AT_MINSIGSTKSZ) to increase the stack size.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20210518200320.17239-5-chang.seok.bae@intel.com
In order to be able to generate loader program in the later
patches change the order of data and text relocations.
Also improve the test to include data relos.
If the kernel supports "FD array" the map_fd relocations can be processed
before text relos since generated loader program won't need to manually
patch ld_imm64 insns with map_fd.
But ksym and kfunc relocations can only be processed after all calls
are relocated, since loader program will consist of a sequence
of calls to bpf_btf_find_by_name_kind() followed by patching of btf_id
and btf_obj_fd into corresponding ld_imm64 insns. The locations of those
ld_imm64 insns are specified in relocations.
Hence process all data relocations (maps, ksym, kfunc) together after call relos.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-12-alexei.starovoitov@gmail.com
bpf_prog_type_syscall is a program that creates a bpf map,
updates it, and loads another bpf program using bpf_sys_bpf() helper.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-6-alexei.starovoitov@gmail.com
Test that when the hash policy is set to custom, traffic is distributed
only according to the inner fields set in the fib_multipath_hash_fields
sysctl.
Each time set a different field and make sure traffic is only
distributed when the field is changed in the packet stream.
The test only verifies the behavior of IPv4/IPv6 overlays on top of an
IPv6 underlay network. The previous patch verified the same with an IPv4
underlay network.
Example output:
# ./ip6gre_custom_multipath_hash.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
INFO: Running IPv4 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6602 / 6002
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 12601
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6802 / 5801
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12602 / 3
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16431 / 16344
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32773
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16431 / 16344
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 32772
INFO: Running IPv6 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6704 / 5902
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 12600
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 5751 / 6852
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12602 / 0
TEST: Multipath hash field: Inner flowlabel (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 8272 / 8181
TEST: Multipath hash field: Inner flowlabel (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 3 / 12602
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16424 / 16351
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 3 / 32774
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16425 / 16350
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 32773
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when the hash policy is set to custom, traffic is distributed
only according to the inner fields set in the fib_multipath_hash_fields
sysctl.
Each time set a different field and make sure traffic is only
distributed when the field is changed in the packet stream.
The test only verifies the behavior of IPv4/IPv6 overlays on top of an
IPv4 underlay network. A subsequent patch will do the same with an IPv6
underlay network.
Example output:
# ./gre_custom_multipath_hash.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
INFO: Running IPv4 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6601 / 6001
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 12600
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6802 / 5802
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12601 / 1
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16430 / 16344
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32772
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16430 / 16343
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32772
INFO: Running IPv6 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6702 / 5900
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 12601
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 5751 / 6851
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12602 / 1
TEST: Multipath hash field: Inner flowlabel (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 8364 / 8065
TEST: Multipath hash field: Inner flowlabel (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12601 / 0
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16425 / 16349
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 32770
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16425 / 16349
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 32770
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when the hash policy is set to custom, traffic is distributed
only according to the outer fields set in the fib_multipath_hash_fields
sysctl.
Each time set a different field and make sure traffic is only
distributed when the field is changed in the packet stream.
The test only verifies the behavior with non-encapsulated IPv4 and IPv6
packets. Subsequent patches will add tests for IPv4/IPv6 overlays on top
of IPv4/IPv6 underlay networks.
Example output:
# ./custom_multipath_hash.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
INFO: Running IPv4 custom multipath hash tests
TEST: Multipath hash field: Source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6353 / 6254
TEST: Multipath hash field: Source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 12600
TEST: Multipath hash field: Destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6102 / 6502
TEST: Multipath hash field: Destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 12601
TEST: Multipath hash field: Source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16428 / 16345
TEST: Multipath hash field: Source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 32770 / 2
TEST: Multipath hash field: Destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16428 / 16345
TEST: Multipath hash field: Destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 32770 / 2
INFO: Running IPv6 custom multipath hash tests
TEST: Multipath hash field: Source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6704 / 5903
TEST: Multipath hash field: Source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12600 / 0
TEST: Multipath hash field: Destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 5551 / 7052
TEST: Multipath hash field: Destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12603 / 0
TEST: Multipath hash field: Flowlabel (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 8378 / 8080
TEST: Multipath hash field: Flowlabel (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 12603
TEST: Multipath hash field: Source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16385 / 16388
TEST: Multipath hash field: Source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32774
TEST: Multipath hash field: Destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16386 / 16390
TEST: Multipath hash field: Destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 32771 / 2
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the two users of this helper have been converted to iproute2 dcb,
it is not necessary anymore. Drop it.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a dedicated tool for configuration of DCB in iproute2 now. Use it
in the selftest instead of mlnx_qos.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a dedicated tool for configuration of DCB in iproute2 now. Use it
in the selftest instead of mlnx_qos.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test sometimes fails with an error message such as:
TEST: tc sample (w/ flower) rate (egress) [FAIL]
Expected 100 packets, got 70 packets, which is -30% off. Required accuracy is +-25%
Make the test more robust by generating more packets, therefore
increasing the number of expected samples. Decrease the transmission
delay in order not to needlessly prolong the test.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the array of the ports that were split in the port_scale test
is local, so the port_cleanup() unsplits an empty array.
Make the array global so the cleanup will be preformed properly.
Suggested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expect the lowest IPv4 address in a subnet to be assignable
and addressable as a unicast (non-broadcast) address on a
local network segment.
Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Suggested-by: John Gilmore <gnu@toad.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix regression with irqbypass not restarting the guest on failed connect
- Fix regression with debug register decoding resulting in overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmCfmUoPHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpDei8QAMOWMA9wFTydsMTyRwDDZzD9i3Vg4bYlTdj1
1C1FiHHGL37t44coo1eHtnydWBuhxhhwDHWQE8owFbDHyOnPzEX+NwhmJ4gVlUW5
51aSxfPgXzKiv17WyncqZO9SfA5/RFyA/C2gRq9/fMr/7CpQJjqrvdQXaWh4kPVa
9jFMVd1sCDUPd5c9Jyxd42CmVZjg6mCorOKaEwlI7NZkulRBlFW21A5y+M57sGTF
RLIuQcggFJaG17kZN4p6v55Yoclt8O4xVbDv8SZV3vO1gjpaF1LtXdsmAKvbDZrZ
lEtdumPHyD1maFhwXQFMOyvOgEaRhlhiNaTgKUOyX2LgeW1utCiYO/KwysflZvIC
oLsfx3x+G0nSxa+MWGL9m52Hrt4yyscfbKfBg6nqJB+AqD3teH20xfsEUHTEuYkW
kEgeWcJcWkadL5+ngs6S4PwFr88NyVBdUAagNd5VXE/KFhxCcr4B9oOXk5WdOaMi
ZvLG5IQfIH6k3w+h2wR2WSoxYwltriZ3PwrPIeJ2Se33bK15xtQy1k/IIqvZP/oK
0xxRVoY+nwuru0QZGwyI7zCFFvZzEKOXJ3qzJ2NeQxoTBky/e0bvUwnU8gXLXGPM
lx2Gzw6t+xlTfcF9oIaQq7WlOsrC7Zr4uiTurZGLZKWklso9tLdzW35zmdN6D3qx
sP2LC4iv
=57tg
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.13, take #1
- Fix regression with irqbypass not restarting the guest on failed connect
- Fix regression with debug register decoding resulting in overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
We recently discovered some of our mitigation patching was not safe
against other CPUs running concurrently.
Add a test which enable/disables all mitigations in a tight loop while
also running some stress load. On an unpatched system this almost always
leads to an oops and panic/reboot, but we also check if the kernel
becomes tainted in case we have a non-fatal oops.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210507064225.1556312-1-mpe@ellerman.id.au
- Generate cpucaps.h at build time rather than carrying lots of
#defines. Merged at -rc1 to avoid some conflicts during the merging
window.
- Initialise RGSR_EL1.SEED in __cpu_setup() as it may be left as 0 out
of reset and the IRG instruction would not function as expected if
only the architected pseudorandom number generator is implemented.
- Fix potential race condition in __sync_icache_dcache() where the
PG_dcache_clean page flag is set before the actual cache maintenance.
- Fix header include in BTI kselftests.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmCessIACgkQa9axLQDI
XvGjdg/+LftotnrknhA1e0cQiewsMTFWPWAv02KeKZRaJSwpa8jXFIliY+39orFs
mLFcvtHqxhmqHNMgr2fz/ggVnHG8SmAnSDdSlefCOV6PO4+jrZWOagniumnd8R3A
LcYxEp8Lq5/1Uek0i56SoaBaZHPz4UEXNsv2uRpCAgFYU6Ag6eGsTAz6oS3NIwum
K5JXwUSg+Fo2DYiVMa5IAKJi1uCnNeYjC35/0gBKD7Fc/wkqp29lgg3AxGcm6QkG
gOFudUHqRD6kPU0mLDDOexO2c3+z4mu3V7aS7zcZebQ3njTgUR4zX3RH79E91sKO
KV+eANDkIHH3TUkD790sy6pJ+qsLueF69lAj4dXF7tebO77khRq51ZFxk2viN3iE
Y/nI3yK6JAE4PkllATECic1lsrs2KXUHG5kdV8ks+QWNpOwFJ7+WBVbO3bQZgMRM
9wXn1ddOdLk9Z/IFRBiuJKsBsm3k5LEffc8Mlir1L/s98pqbGmq5tsNInVsRwST0
QRppP3BgbWD2zgV2diiLgsakcc08CGpWc7CJYE2FiDm/spqArbRGwfNWC8J/1W7H
sWIBr193wMW5kaBc4BGOW9UtOs15HW5UMekU1aTwTAH39064NqjDzkfqDARZwYr/
G3m6aMf1DPue2f9DkaokS/OeKMDoieX31kLWjq1jWWperILTJy4=
=TgRX
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Fixes and cpucaps.h automatic generation:
- Generate cpucaps.h at build time rather than carrying lots of
#defines. Merged at -rc1 to avoid some conflicts during the merge
window.
- Initialise RGSR_EL1.SEED in __cpu_setup() as it may be left as 0
out of reset and the IRG instruction would not function as expected
if only the architected pseudorandom number generator is
implemented.
- Fix potential race condition in __sync_icache_dcache() where the
PG_dcache_clean page flag is set before the actual cache
maintenance.
- Fix header include in BTI kselftests"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache()
arm64: tools: Add __ASM_CPUCAPS_H to the endif in cpucaps.h
arm64: mte: initialize RGSR_EL1.SEED in __cpu_setup
kselftest/arm64: Add missing stddef.h include to BTI tests
arm64: Generate cpucaps.h
Adjust static_linked selftests to test a mix of global and static variables
and their handling of bpftool's skeleton generation code.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210513233643.194711-1-andrii@kernel.org
Fix ~12 single-word typos in RCU code comments.
[ paulmck: Apply feedback from Randy Dunlap. ]
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When building selftests, the build system will install uapi linux
headers at usr/include in kernel source's root directory. When building
with a different output folder, the headers will be installed at
kselftests/usr/include.
Add both paths so we can build the tests using up-to-date headers.
Currently, this is uncommon to happen since it's rare to find a
build system with an outdated futex header, but it happens
when testing new futex operations.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210427135328.11013-2-andrealmeid@collabora.com
Provides a selftest and examples of using the interface.
[peterz: updated to not use sched_debug]
Signed-off-by: Chris Hyser <chris.hyser@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123309.100860030@infradead.org
Daniel Borkmann says:
====================
pull-request: bpf 2021-05-11
The following pull-request contains BPF updates for your *net* tree.
We've added 13 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 817 insertions(+), 382 deletions(-).
The main changes are:
1) Fix multiple ringbuf bugs in particular to prevent writable mmap of
read-only pages, from Andrii Nakryiko & Thadeu Lima de Souza Cascardo.
2) Fix verifier alu32 known-const subregister bound tracking for bitwise
operations and/or/xor, from Daniel Borkmann.
3) Reject trampoline attachment for functions with variable arguments,
and also add a deny list of other forbidden functions, from Jiri Olsa.
4) Fix nested bpf_bprintf_prepare() calls used by various helpers by
switching to per-CPU buffers, from Florent Revest.
5) Fix kernel compilation with BTF debug info on ppc64 due to pahole
missing TCP-CC functions like cubictcp_init, from Martin KaFai Lau.
6) Add a kconfig entry to provide an option to disallow unprivileged
BPF by default, from Daniel Borkmann.
7) Fix libbpf compilation for older libelf when GELF_ST_VISIBILITY()
macro is not available, from Arnaldo Carvalho de Melo.
8) Migrate test_tc_redirect to test_progs framework as prep work
for upcoming skb_change_head() fix & selftest, from Jussi Maki.
9) Fix a libbpf segfault in add_dummy_ksym_var() if BTF is not
present, from Ian Rogers.
10) Fix tx_only micro-benchmark in xdpsock BPF sample with proper frame
size, from Magnus Karlsson.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation of skipping emitting static variables in BPF skeletons, switch
all current selftests uses of static variables to pass data between BPF and
user-space to use global variables.
All non-read-only `static volatile` variables become just plain global
variables by dropping `static volatile` part.
Read-only `static volatile const` variables, though, still require `volatile`
modifier, otherwise compiler will ignore whatever values are set from
user-space.
Few static linker tests are using name-conflicting static variables to
validate that static linker still properly handles static variables and
doesn't trip up on name conflicts.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210507054119.270888-4-andrii@kernel.org
As discussed in [0], this ports test_tc_redirect.sh to the test_progs
framework and removes the old test.
This makes it more in line with rest of the tests and makes it possible
to run this test case with vmtest.sh and under the bpf CI.
The upcoming skb_change_head() helper fix in [0] is depending on it and
extending the test case to redirect a packet from L3 device to veth.
[0] https://lore.kernel.org/bpf/20210427135550.807355-1-joamaki@gmail.com
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210505085925.783985-1-joamaki@gmail.com
Currently, if a torture scenario requires more CPUs than are present
on the build system, kvm.sh and friends limit the CPUs available to
that scenario. This makes total sense when the build system and the
system running the scenarios are one and the same, but not so much when
remote systems might well have more CPUs.
This commit therefore introduces a --remote flag to kvm.sh that suppresses
this CPU-limiting behavior, and causes kvm-remote.sh to use this flag.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In a long-duration kvm-remote.sh run, almost all of the remote accesses will
be simple file-existence checks. These are thus the most likely to be caught
out by network failures, which do happen from time to time.
This commit therefore takes a first step towards tolerating temporary
network outages by making the file-existence checks repeat in the face of
such an outage. They also print a message every minute during a outage,
allowing the user to take appropriate action.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds the BUSTED-BOOST rcutorture scenario, which can be
used to test rcutorture's ability to test RCU priority boosting.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Some of the code invoked directly and indirectly from kvm.sh parses
the output of commands. This parsing assumes English, which can cause
failures if the user has set some other language. In a few cases,
there are language-independent commands available, but this is not
always the case. Therefore, as an alternative to polyglot parsing,
this commit sets the LANG environment variable to en_US.UTF-8.
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Grepping for "CPU" on lscpu output isn't always successful, depending
on the local language setting. As a result, the build can be aborted
early with:
"make: the '-j' option requires a positive integer argument"
This commit therefore uses the human-language-independent approach
available via the getconf command, both in kvm-build.sh and in
kvm-remote.sh.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, kvm-find-errors.sh assumes that if "--buildonly" appears in
the log file, then the run did builds but ran no kernels. This breaks
with kvm-remote.sh, which uses kvm.sh to do a build, then kvm-again.sh
to run the kernels built on remote systems. This commit therefore adds
a check for a kvm-remote.sh run.
While in the area, this commit checks for "--build-only" as well as
"--build-only".
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Given remote rcutorture runs, it is quite possible that the build system
will have fewer CPUs than the system(s) running the actual test scenarios.
In such cases, using the number of CPUs on the test systems can overload
the build system, slowing down the build or, worse, OOMing the build
system. This commit therefore uses the build system's CPU count to set
N in "make -jN", and by tradition sets "N" to double the CPU count.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit reduces duplicate code by making kvm.sh use the new
kvm-end-run-stats.sh script rather than taking its historical approach
of open-coding it.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit abstractst the end-of-run summary from kvm-again.sh, and,
while in the area, brings its format into line with that of kvm.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kvm-again.sh script relies on shell comments added to the qemu-cmd
file, but this means that code extracting values from the QEMU command in
this file must grep out those commment. Which kvm-recheck-rcu.sh failed
to do, which destroyed its grace-period-per-second calculation. This
commit therefore adds the needed "grep -v '^#'" to kvm-recheck-rcu.sh.
Fixes: 315957cad4 ("torture: Prepare for splitting qemu execution from kvm-test-1-run.sh")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a kvm-remote.sh script that prepares a tarball that
is then downloaded to the remote system(s) and executed. The user is
responsible for having set up the remote systems to run qemu, but all the
kernel builds are done on the system running the kvm-remote.sh script.
The user is also responsible for setting up the remote systems so that
ssh can be run non-interactively, given that ssh is used to poll the
remote systems in order to detect completion of each batch.
See the script's header comment for usage information.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It is no longer possible to disable CPU hotplug in many configurations,
which means that the CONFIG_HOTPLUG_CPU=n lines in rcuscale's Kconfig
options are just a source of useless diagnostics. In addition, rcuscale
doesn't do CPU-hotplug operations in any case. This commit therefore
changes these lines to read CONFIG_HOTPLUG_CPU=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It is no longer possible to disable CPU hotplug in many configurations,
which means that the CONFIG_HOTPLUG_CPU=n lines in refscale's Kconfig
options are just a source of useless diagnostics. In addition, refscale
doesn't do CPU-hotplug operations in any case. This commit therefore
changes these lines to read CONFIG_HOTPLUG_CPU=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit saves a few lines of code by making kvm-again.sh use the
"scenarios" file rather than the "batches" file, both of which are
generated by kvm.sh.
This results in a break point because new versions of kvm-again.sh cannot
handle "res" directories produced by old versions of kvm.sh, which lack
the "scenarios" file. In the unlikely event that this becomes a problem,
a trivial script suffices to convert the "batches" file to a "scenarios"
file, and this script may be easily extracted from kvm.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds "--dryrun scenarios" to kvm.sh, which prints something
like this:
1. TREE03
2. TREE07
3. SRCU-P SRCU-N
4. TREE01 TRACE01
5. TREE02 TRACE02
6. TREE04 RUDE01 TASKS01
7. TREE05 TASKS03 SRCU-T SRCU-U
8. TASKS02 TINY01 TINY02 TREE09
This format is more convenient for scripts that run batches of scenarios.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Although "eval" was removed from torture.sh, that commit failed to
update the KCSAN instance of $* to "$@". This results in failures when
(for example) --bootargs is given more than one argument. This commit
therefore makes this change.
There is one remaining instance of $* in torture.sh, but this
is used only in the "echo" command, where quoting doesn't matter
so much.
Fixes: 197220d4a3 ("torture: Remove use of "eval" in torture.sh")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
* Fix virtualization of RDPID
* Virtualization of DR6_BUS_LOCK, which on bare metal is new in
the 5.13 merge window
* More nested virtualization migration fixes (nSVM and eVMCS)
* Fix for KVM guest hibernation
* Fix for warning in SEV-ES SRCU usage
* Block KVM from loading on AMD machines with 5-level page tables,
due to the APM not mentioning how host CR4.LA57 exactly impacts
the guest.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCZWwgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOE9wgAk7Io8cuvnhC9ogVqzZWrPweWqFg8
fJcPMB584JRnMqYHBVYbkTPGe8SsCHKR2MKsNdc4cEP111cyr3suWsxOdmjJn58i
7ahy6PcKx7wWeWwEt7O599l6CeoX5XB9ExvA6eiXAv7iZeOJHFa+Ny2GlWgauy6Y
DELryEomx1r4IUkZaSR+2fYjzvOWTXQixwU/jwx8NcTJz0DrzknzLE7XOciPBfn0
t0Q2rCXdL2nF1uPksZbntx8Qoa6t6GDVIyrH/ZCPQYJtAX6cjxNAh3zwCe+hMnOd
fW8ntBH1nZRiNnberA4IICAzqnUokgPWdKBrZT2ntWHBK+aqxXHznrlPJA==
=e+gD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Lots of bug fixes.
- Fix virtualization of RDPID
- Virtualization of DR6_BUS_LOCK, which on bare metal is new to this
release
- More nested virtualization migration fixes (nSVM and eVMCS)
- Fix for KVM guest hibernation
- Fix for warning in SEV-ES SRCU usage
- Block KVM from loading on AMD machines with 5-level page tables, due
to the APM not mentioning how host CR4.LA57 exactly impacts the
guest.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (48 commits)
KVM: SVM: Move GHCB unmapping to fix RCU warning
KVM: SVM: Invert user pointer casting in SEV {en,de}crypt helpers
kvm: Cap halt polling at kvm->max_halt_poll_ns
tools/kvm_stat: Fix documentation typo
KVM: x86: Prevent deadlock against tk_core.seq
KVM: x86: Cancel pvclock_gtod_work on module removal
KVM: x86: Prevent KVM SVM from loading on kernels with 5-level paging
KVM: X86: Expose bus lock debug exception to guest
KVM: X86: Add support for the emulation of DR6_BUS_LOCK bit
KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
KVM: x86: Hide RDTSCP and RDPID if MSR_TSC_AUX probing failed
KVM: x86: Tie Intel and AMD behavior for MSR_TSC_AUX to guest CPU model
KVM: x86: Move uret MSR slot management to common x86
KVM: x86: Export the number of uret MSRs to vendor modules
KVM: VMX: Disable loading of TSX_CTRL MSR the more conventional way
KVM: VMX: Use common x86's uret MSR list as the one true list
KVM: VMX: Use flag to indicate "active" uret MSRs instead of sorting list
KVM: VMX: Configure list of user return MSRs at module init
KVM: x86: Add support for RDPID without RDTSCP
KVM: SVM: Probe and load MSR_TSC_AUX regardless of RDTSCP support in host
...
Test that the new cgroup.kill feature works as intended.
Link: https://lore.kernel.org/r/20210503143922.3093755-5-brauner@kernel.org
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: cgroups@vger.kernel.org
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
as they will be used by the tests for cgroup killing.
Link: https://lore.kernel.org/r/20210503143922.3093755-4-brauner@kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: cgroups@vger.kernel.org
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
If cgroup.kill file is supported make use of it.
Link: https://lore.kernel.org/r/20210503143922.3093755-3-brauner@kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: cgroups@vger.kernel.org
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Explicitly include stddef.h when building the BTI tests so that we have
a definition of NULL, with at least some toolchains this is not done
implicitly by anything else:
test.c: In function ‘start’:
test.c:214:25: error: ‘NULL’ undeclared (first use in this function)
214 | sigaction(SIGILL, &sa, NULL);
| ^~~~
test.c:20:1: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210507162542.23149-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config is
really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=935P
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config
is really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang
as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
kbuild: Don't remove link-vmlinux temporary files on exit/signal
kbuild: remove the unneeded comments for external module builds
kbuild: make distclean remove tag files in sub-directories
kbuild: make distclean work against $(objtree) instead of $(srctree)
kbuild: refactor modname-multi by using suffix-search
kbuild: refactor fdtoverlay rule
kbuild: parameterize the .o part of suffix-search
arch: use cross_compiling to check whether it is a cross build or not
kbuild: remove ARCH=sh64 support from top Makefile
.gitignore: prefix local generated files with a slash
kbuild: replace LANG=C with LC_ALL=C
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
kbuild: add a script to remove stale generated files
kbuild: update config_data.gz only when the content of .config is changed
.gitignore: ignore only top-level modules.builtin
.gitignore: move tags and TAGS close to other tag files
kernel/.gitgnore: remove stale timeconst.h and hz.bc
usr/include: refactor .gitignore
genksyms: fix stale comment
...
and netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to
avoid false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JmWS
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc1, including fixes from bpf, can and
netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors"
* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
atm: firestream: Use fallthrough pseudo-keyword
net: stmmac: Do not enable RX FIFO overflow interrupts
mptcp: fix splat when closing unaccepted socket
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
tcp: Specify cmsgbuf is user pointer for receive zerocopy.
mlxsw: spectrum_mr: Update egress RIF list before route's action
net: ipa: fix inter-EE IRQ register definitions
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
can: mcp251x: fix resume from sleep before interface was brought up
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
...
Clang's integrated assembler does not allow symbols with non-absolute
values to be reassigned. Modify the interrupt entry loop macro to be
compatible with IAS by using a label and an offset.
Cc: Jian Cai <caij2003@gmail.com>
Signed-off-by: Bill Wendling <morbo@google.com>
References: https://lore.kernel.org/lkml/20200714233024.1789985-1-caij2003@gmail.com/
Message-Id: <20201211012317.3722214-1-morbo@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a test for the regression, introduced by commit f2c7ef3ba9
("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit"). When
L2->L1 exit is forced immediately after restoring nested state,
KVM_REQ_GET_NESTED_STATE_PAGES request is cleared and VMCS12 changes
(e.g. fresh RIP) are not reflected to eVMCS. The consequent nested
vCPU run gets broken.
Utilize NMI injection to do the job.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210505151823.1341678-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'run->exit_reason == KVM_EXIT_SHUTDOWN' check is not ideal as we may be
getting some unexpected exception. Directly check for #UD instead.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210505151823.1341678-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'assert.h' included in 'sparsebit.c' is duplicated.
It is also included in the 161th line.
'string.h' included in 'mincore_selftest.c' is duplicated.
It is also included in the 15th line.
'sched.h' included in 'tlbie_test.c' is duplicated.
It is also included in the 33th line.
Link: https://lkml.kernel.org/r/20210316073336.426255-1-zhang.yunkai@zte.com.cn
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "fs/epoll: restore user-visible behavior upon event ready".
This series tries to address a change in user visible behavior, reported
in https://bugzilla.kernel.org/show_bug.cgi?id=208943.
Epoll does not report an event to all the threads running epoll_wait()
on the same epoll descriptor. Unsurprisingly, this was bisected back to
339ddb53d3 (fs/epoll: remove unnecessary wakeups of nested epoll), which
has had various problems in the past, beyond only nested epoll usage.
This patch (of 2):
This incorporates the testcase originally reported in:
https://bugzilla.kernel.org/show_bug.cgi?id=208943
Which ensures an event is reported to all threads blocked on the same
epoll descriptor, otherwise only a single thread will receive the wakeup
once the event become ready.
Link: https://lkml.kernel.org/r/20210405231025.33829-1-dave@stgolabs.net
Link: https://lkml.kernel.org/r/20210405231025.33829-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Roman Penyaev <rpenyaev@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Test that /proc instance mounted with
mount -t proc -o subset=pid
contains only ".", "..", "self", "thread-self" and pid directories.
Note:
Currently "subset=pid" doesn't return "." and ".." via readdir.
This must be a bug.
Link: https://lkml.kernel.org/r/YFYZZ7WGaZlsnChS@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that proc_ops are separate from file_operations and other operations
it easy to check all instances to have ->proc_lseek hook and remove check
in main code.
Note:
nonseekable_open() files naturally don't require ->proc_lseek.
Garbage collect pde_lseek() function.
[adobriyan@gmail.com: smoke test lseek()]
Link: https://lkml.kernel.org/r/YG4OIhChOrVTPgdN@localhost.localdomain
Link: https://lkml.kernel.org/r/YFYX0Bzwxlc7aBa/@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton:
"The remainder of the main mm/ queue.
143 patches.
Subsystems affected by this patch series (all mm): pagecache, hugetlb,
userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap,
kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and
kfence"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (143 commits)
kfence: use power-efficient work queue to run delayed work
kfence: maximize allocation wait timeout duration
kfence: await for allocation using wait_event
kfence: zero guard page after out-of-bounds access
mm/process_vm_access.c: remove duplicate include
mm/mempool: minor coding style tweaks
mm/highmem.c: fix coding style issue
btrfs: use memzero_page() instead of open coded kmap pattern
iov_iter: lift memzero_page() to highmem.h
mm/zsmalloc: use BUG_ON instead of if condition followed by BUG.
mm/zswap.c: switch from strlcpy to strscpy
arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
mm,memory_hotplug: add kernel boot option to enable memmap_on_memory
acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported
mm,memory_hotplug: allocate memmap from the added memory range
mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count()
mm,memory_hotplug: relax fully spanned sections check
drivers/base/memory: introduce memory_block_{online,offline}
mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove
...
When pages are pinned they can be faulted in userland and migrated, and
they can be faulted right in kernel without migration.
In either case, the pinned pages must end-up being pinnable (not
movable).
Add a new test to gup_test, to help verify that the gup/pup
(get_user_pages() / pin_user_pages()) behavior with respect to pinnable
and movable pages is reasonable and correct. Specifically, provide a
way to:
1) Verify that only "pinnable" pages are pinned. This is checked
automatically for you.
2) Verify that gup/pup performance is reasonable. This requires
comparing benchmarks between doing gup/pup on pages that have been
pre-faulted in from user space, vs. doing gup/pup on pages that are
not faulted in until gup/pup time (via FOLL_TOUCH). This decision is
controlled with the new -z command line option.
Link: https://lkml.kernel.org/r/20210215161349.246722-15-pasha.tatashin@soleen.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In gup_test both gup_flags and test_flags use the same flags field.
This is broken.
Farther, in the actual gup_test.c all the passed gup_flags are erased
and unconditionally replaced with FOLL_WRITE.
Which means that test_flags are ignored, and code like this always
performs pin dump test:
155 if (gup->flags & GUP_TEST_FLAG_DUMP_PAGES_USE_PIN)
156 nr = pin_user_pages(addr, nr, gup->flags,
157 pages + i, NULL);
158 else
159 nr = get_user_pages(addr, nr, gup->flags,
160 pages + i, NULL);
161 break;
Add a new test_flags field, to allow raw gup_flags to work. Add a new
subcommand for DUMP_USER_PAGES_TEST to specify that pin test should be
performed.
Remove unconditional overwriting of gup_flags via FOLL_WRITE. But,
preserve the previous behaviour where FOLL_WRITE was the default flag,
and add a new option "-W" to unset FOLL_WRITE.
Rename flags with gup_flags.
With the fix, dump works like this:
root@virtme:/# gup_test -c
---- page #0, starting from user virt addr: 0x7f8acb9e4000
page:00000000d3d2ee27 refcount:2 mapcount:1 mapping:0000000000000000
index:0x0 pfn:0x100bcf
anon flags: 0x300000000080016(referenced|uptodate|lru|swapbacked)
raw: 0300000000080016 ffffd0e204021608 ffffd0e208df2e88 ffff8ea04243ec61
raw: 0000000000000000 0000000000000000 0000000200000000 0000000000000000
page dumped because: gup_test: dump_pages() test
DUMP_USER_PAGES_TEST: done
root@virtme:/# gup_test -c -p
---- page #0, starting from user virt addr: 0x7fd19701b000
page:00000000baed3c7d refcount:1025 mapcount:1 mapping:0000000000000000
index:0x0 pfn:0x108008
anon flags: 0x300000000080014(uptodate|lru|swapbacked)
raw: 0300000000080014 ffffd0e204200188 ffffd0e205e09088 ffff8ea04243ee71
raw: 0000000000000000 0000000000000000 0000040100000000 0000000000000000
page dumped because: gup_test: dump_pages() test
DUMP_USER_PAGES_TEST: done
Refcount shows the difference between pin vs no-pin case.
Also change type of nr from int to long, as it counts number of pages.
Link: https://lkml.kernel.org/r/20210215161349.246722-14-pasha.tatashin@soleen.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a dormant bug in userfaultfd_events_test(), where we did `return
faulting_process(0)` instead of `exit(faulting_process(0))`. This
caused the forked process to keep running, trying to execute any further
test cases after the events test in parallel with the "real" process.
Add a simple test case which exercises minor faults. In short, it does
the following:
1. "Sets up" an area (area_dst) and a second shared mapping to the same
underlying pages (area_dst_alias).
2. Register one of these areas with userfaultfd, in minor fault mode.
3. Start a second thread to handle any minor faults.
4. Populate the underlying pages with the non-UFFD-registered side of
the mapping. Basically, memset() each page with some arbitrary
contents.
5. Then, using the UFFD-registered mapping, read all of the page
contents, asserting that the contents match expectations (we expect
the minor fault handling thread can modify the page contents before
resolving the fault).
The minor fault handling thread, upon receiving an event, flips all the
bits (~) in that page, just to prove that it can modify it in some
arbitrary way. Then it issues a UFFDIO_CONTINUE ioctl, to setup the
mapping and resolve the fault. The reading thread should wake up and
see this modification.
Currently the minor fault test is only enabled in hugetlb_shared mode,
as this is the only configuration the kernel feature supports.
Link: https://lkml.kernel.org/r/20210301222728.176417-7-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Price <steven.price@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Further extend <debugfs>/split_huge_pages to accept
"<path>,<pgoff_start>,<pgoff_end>" for file-backed THP split tests since
tmpfs may have file backed by THP that mapped nowhere.
Update selftest program to test file-backed THP split too.
Link: https://lkml.kernel.org/r/20210331235309.332292-2-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mika Penttila <mika.penttila@nextfour.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We did not have a direct user interface of splitting the compound page
backing a THP and there is no need unless we want to expose the THP
implementation details to users. Make <debugfs>/split_huge_pages accept a
new command to do that.
By writing "<pid>,<vaddr_start>,<vaddr_end>" to
<debugfs>/split_huge_pages, THPs within the given virtual address range
from the process with the given pid are split. It is used to test
split_huge_page function. In addition, a selftest program is added to
tools/testing/selftests/vm to utilize the interface by splitting
PMD THPs and PTE-mapped THPs.
This does not change the old behavior, i.e., writing 1 to the interface
to split all THPs in the system.
Link: https://lkml.kernel.org/r/20210331235309.332292-1-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mika Penttila <mika.penttila@nextfour.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- add a new dma_alloc_noncontiguous API (me, Ricardo Ribalda)
- fix a copyright noice (Hao Fang)
- add an unlikely annotation to dma_mapping_error (Heiner Kallweit)
- remove a pointless empty line (Wang Qing)
- add support for multi-pages map/unmap bencharking (Xiang Chen)
-----BEGIN PGP SIGNATURE-----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=DJoy
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.13' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- add a new dma_alloc_noncontiguous API (me, Ricardo Ribalda)
- fix a copyright notice (Hao Fang)
- add an unlikely annotation to dma_mapping_error (Heiner Kallweit)
- remove a pointless empty line (Wang Qing)
- add support for multi-pages map/unmap bencharking (Xiang Chen)
* tag 'dma-mapping-5.13' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: add unlikely hint to error path in dma_mapping_error
dma-mapping: benchmark: Add support for multi-pages map/unmap
dma-mapping: benchmark: use the correct HiSilicon copyright
dma-mapping: remove a pointless empty line in dma_alloc_coherent
media: uvcvideo: Use dma_alloc_noncontiguous API
dma-iommu: implement ->alloc_noncontiguous
dma-iommu: refactor iommu_dma_alloc_remap
dma-mapping: add a dma_alloc_noncontiguous API
dma-mapping: refactor dma_{alloc,free}_pages
dma-mapping: add a dma_mmap_pages helper
-----BEGIN PGP SIGNATURE-----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=uCN4
-----END PGP SIGNATURE-----
Merge tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull Landlock LSM from James Morris:
"Add Landlock, a new LSM from Mickaël Salaün.
Briefly, Landlock provides for unprivileged application sandboxing.
From Mickaël's cover letter:
"The goal of Landlock is to enable to restrict ambient rights (e.g.
global filesystem access) for a set of processes. Because Landlock
is a stackable LSM [1], it makes possible to create safe security
sandboxes as new security layers in addition to the existing
system-wide access-controls. This kind of sandbox is expected to
help mitigate the security impact of bugs or unexpected/malicious
behaviors in user-space applications. Landlock empowers any
process, including unprivileged ones, to securely restrict
themselves.
Landlock is inspired by seccomp-bpf but instead of filtering
syscalls and their raw arguments, a Landlock rule can restrict the
use of kernel objects like file hierarchies, according to the
kernel semantic. Landlock also takes inspiration from other OS
sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD
Pledge/Unveil.
In this current form, Landlock misses some access-control features.
This enables to minimize this patch series and ease review. This
series still addresses multiple use cases, especially with the
combined use of seccomp-bpf: applications with built-in sandboxing,
init systems, security sandbox tools and security-oriented APIs [2]"
The cover letter and v34 posting is here:
https://lore.kernel.org/linux-security-module/20210422154123.13086-1-mic@digikod.net/
See also:
https://landlock.io/
This code has had extensive design discussion and review over several
years"
Link: https://lore.kernel.org/lkml/50db058a-7dde-441b-a7f9-f6837fe8b69f@schaufler-ca.com/ [1]
Link: https://lore.kernel.org/lkml/f646e1c7-33cf-333f-070c-0a40ad0468cd@digikod.net/ [2]
* tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
landlock: Enable user space to infer supported features
landlock: Add user and kernel documentation
samples/landlock: Add a sandbox manager example
selftests/landlock: Add user space tests
landlock: Add syscall implementations
arch: Wire up Landlock syscalls
fs,security: Add sb_delete hook
landlock: Support filesystem access-control
LSM: Infrastructure management of the superblock
landlock: Add ptrace restrictions
landlock: Set up the security framework and manage credentials
landlock: Add ruleset and domain management
landlock: Add object management
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation,
zap under read lock, enable/disably dirty page logging under
read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing
the architecture-specific code
- Some selftests improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK
y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b
c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+
Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY
+2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b
M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ==
=AXUi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
LANG gives a weak default to each LC_* in case it is not explicitly
defined. LC_ALL, if set, overrides all other LC_* variables.
LANG < LC_CTYPE, LC_COLLATE, LC_MONETARY, LC_NUMERIC, ... < LC_ALL
This is why documentation such as [1] suggests to set LC_ALL in build
scripts to get the deterministic result.
LANG=C is not strong enough to override LC_* that may be set by end
users.
[1]: https://reproducible-builds.org/docs/locales/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Matthias Maennich <maennich@google.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> (mptcp)
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge misc updates from Andrew Morton:
"A few misc subsystems and some of MM.
175 patches.
Subsystems affected by this patch series: ia64, kbuild, scripts, sh,
ocfs2, kfifo, vfs, kernel/watchdog, and mm (slab-generic, slub,
kmemleak, debug, pagecache, msync, gup, memremap, memcg, pagemap,
mremap, dma, sparsemem, vmalloc, documentation, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (175 commits)
mm/memory-failure: unnecessary amount of unmapping
mm/mmzone.h: fix existing kernel-doc comments and link them to core-api
mm: page_alloc: ignore init_on_free=1 for debug_pagealloc=1
net: page_pool: use alloc_pages_bulk in refill code path
net: page_pool: refactor dma_map into own function page_pool_dma_map
SUNRPC: refresh rq_pages using a bulk page allocator
SUNRPC: set rq_page_end differently
mm/page_alloc: inline __rmqueue_pcplist
mm/page_alloc: optimize code layout for __alloc_pages_bulk
mm/page_alloc: add an array-based interface to the bulk page allocator
mm/page_alloc: add a bulk page allocator
mm/page_alloc: rename alloced to allocated
mm/page_alloc: duplicate include linux/vmalloc.h
mm, page_alloc: avoid page_to_pfn() in move_freepages()
mm/Kconfig: remove default DISCONTIGMEM_MANUAL
mm: page_alloc: dump migrate-failed pages
mm/mempolicy: fix mpol_misplaced kernel-doc
mm/mempolicy: rewrite alloc_pages_vma documentation
mm/mempolicy: rewrite alloc_pages documentation
mm/mempolicy: rename alloc_pages_current to alloc_pages
...
- Enable KFENCE for 32-bit.
- Implement EBPF for 32-bit.
- Convert 32-bit to do interrupt entry/exit in C.
- Convert 64-bit BookE to do interrupt entry/exit in C.
- Changes to our signal handling code to use user_access_begin/end() more extensively.
- Add support for time namespaces (CONFIG_TIME_NS)
- A series of fixes that allow us to reenable STRICT_KERNEL_RWX.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le Goater, Chen Huang, Chris
Packham, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Dan Carpenter, Daniel
Axtens, Daniel Henrique Barboza, David Gibson, Davidlohr Bueso, Denis Efremov,
dingsenjie, Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren Myneni, He Ying,
Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee Jones, Leonardo Bras, Li Huafei,
Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Nathan Chancellor, Nathan
Lynch, Nicholas Piggin, Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi
Bangoria, Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen Rothwell, Thadeu Lima
de Souza Cascardo, Thomas Gleixner, Tony Ambardar, Tyrel Datwyler, Vaibhav Jain,
Vincenzo Frascino, Xiongwei Song, Yang Li, Yu Kuai, Zhang Yunkai.
-----BEGIN PGP SIGNATURE-----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=dfKL
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable KFENCE for 32-bit.
- Implement EBPF for 32-bit.
- Convert 32-bit to do interrupt entry/exit in C.
- Convert 64-bit BookE to do interrupt entry/exit in C.
- Changes to our signal handling code to use user_access_begin/end()
more extensively.
- Add support for time namespaces (CONFIG_TIME_NS)
- A series of fixes that allow us to reenable STRICT_KERNEL_RWX.
- Other smaller features, fixes & cleanups.
Thanks to Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le
Goater, Chen Huang, Chris Packham, Christophe Leroy, Christopher M.
Riedl, Colin Ian King, Dan Carpenter, Daniel Axtens, Daniel Henrique
Barboza, David Gibson, Davidlohr Bueso, Denis Efremov, dingsenjie,
Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren
Myneni, He Ying, Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee
Jones, Leonardo Bras, Li Huafei, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Nathan Chancellor, Nathan Lynch, Nicholas Piggin,
Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi Bangoria,
Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen
Rothwell, Thadeu Lima de Souza Cascardo, Thomas Gleixner, Tony Ambardar,
Tyrel Datwyler, Vaibhav Jain, Vincenzo Frascino, Xiongwei Song, Yang Li,
Yu Kuai, and Zhang Yunkai.
* tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (302 commits)
powerpc/signal32: Fix erroneous SIGSEGV on RT signal return
powerpc: Avoid clang uninitialized warning in __get_user_size_allowed
powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe
powerpc/kvm: Fix build error when PPC_MEM_KEYS/PPC_PSERIES=n
powerpc/kasan: Fix shadow start address with modules
powerpc/kernel/iommu: Use largepool as a last resort when !largealloc
powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs
powerpc/44x: fix spelling mistake in Kconfig "varients" -> "variants"
powerpc/iommu: Annotate nested lock for lockdep
powerpc/iommu: Do not immediately panic when failed IOMMU table allocation
powerpc/iommu: Allocate it_map by vmalloc
selftests/powerpc: remove unneeded semicolon
powerpc/64s: remove unneeded semicolon
powerpc/eeh: remove unneeded semicolon
powerpc/selftests: Add selftest to test concurrent perf/ptrace events
powerpc/selftests/perf-hwbreak: Add testcases for 2nd DAWR
powerpc/selftests/perf-hwbreak: Coalesce event creation code
powerpc/selftests/ptrace-hwbreak: Add testcases for 2nd DAWR
powerpc/configs: Add IBMVNIC to some 64-bit configs
selftests/powerpc: Add uaccess flush test
...
A 'single_cpu_test' parameter is odd and it does not exist anymore.
Instead there was introduced a 'nr_threads' one. If it is not set it
behaves as the former parameter.
That is why update a "stress mode" according to this change specifying
number of workers which are equal to number of CPUs. Also update an
output of help message based on a new interface.
Link: https://lkml.kernel.org/r/20210402202237.20334-3-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This test extends the current mremap tests to validate that the
MREMAP_DONTUNMAP operation can be performed on shmem mappings.
Link: https://lkml.kernel.org/r/20210323182520.2712101-3-bgeffon@google.com
Signed-off-by: Brian Geffon <bgeffon@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Alejandro Colomar <alx.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With memcg having switched to rstat, memory.stat output is precise.
Update the cgroup selftest to reflect the expectations and error
tolerances of the new implementation.
Also add newly tracked types of memory to the memory.stat side of the
equation, since they're included in memory.current and could throw false
positives.
Link: https://lkml.kernel.org/r/20210209163304.77088-9-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The BPF program for the snprintf selftest runs on all syscall entries.
On busy multicore systems this can cause concurrency issues.
For example it was observed that sometimes the userspace part of the
test reads " 4 0000" instead of " 4 000" (extra '0' at the end)
which seems to happen just before snprintf on another core sets
end[-1] = '\0'.
This patch adds a pid filter to the test to ensure that no
bpf_snprintf() will write over the test's output buffers while the
userspace reads the values.
Fixes: c2e39c6bdc ("selftests/bpf: Add a series of tests for bpf_snprintf")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210428152501.1024509-1-revest@chromium.org
- Evaluate $(call cc-option,...) etc. only for build targets
- Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux
- Remove unnecessary --gcc-toolchains Clang flag because the --prefix
flag finds the toolchains
- Do not pass Clang's --prefix flag when using the integrated as
- Check the assembler version in Kconfig time
- Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up
some dependencies in Kconfig
- Fix invalid Module.symvers creation when building only modules without
vmlinux
- Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is
set, but there is no module to build
- Refactor module installation Makefile
- Support zstd for module compression
- Convert alpha and ia64 to use generic shell scripts to generate the
syscall headers
- Add a new elfnote to indicate if the kernel was built with LTO, which
will be used by pahole
- Flatten the directory structure under include/config/ so CONFIG options
and filenames match
- Change the deb source package name from linux-$(KERNELRELEASE) to
linux-upstream
-----BEGIN PGP SIGNATURE-----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=ti9L
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Evaluate $(call cc-option,...) etc. only for build targets
- Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux
- Remove unnecessary --gcc-toolchains Clang flag because the --prefix
flag finds the toolchains
- Do not pass Clang's --prefix flag when using the integrated as
- Check the assembler version in Kconfig time
- Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up
some dependencies in Kconfig
- Fix invalid Module.symvers creation when building only modules
without vmlinux
- Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is
set, but there is no module to build
- Refactor module installation Makefile
- Support zstd for module compression
- Convert alpha and ia64 to use generic shell scripts to generate the
syscall headers
- Add a new elfnote to indicate if the kernel was built with LTO, which
will be used by pahole
- Flatten the directory structure under include/config/ so CONFIG
options and filenames match
- Change the deb source package name from linux-$(KERNELRELEASE) to
linux-upstream
* tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (42 commits)
kbuild: Add $(KBUILD_HOSTLDFLAGS) to 'has_libelf' test
kbuild: deb-pkg: change the source package name to linux-upstream
tools: do not include scripts/Kbuild.include
kbuild: redo fake deps at include/config/*.h
kbuild: remove TMPO from try-run
MAINTAINERS: add pattern for dummy-tools
kbuild: add an elfnote for whether vmlinux is built with lto
ia64: syscalls: switch to generic syscallhdr.sh
ia64: syscalls: switch to generic syscalltbl.sh
alpha: syscalls: switch to generic syscallhdr.sh
alpha: syscalls: switch to generic syscalltbl.sh
sysctl: use min() helper for namecmp()
kbuild: add support for zstd compressed modules
kbuild: remove CONFIG_MODULE_COMPRESS
kbuild: merge scripts/Makefile.modsign to scripts/Makefile.modinst
kbuild: move module strip/compression code into scripts/Makefile.modinst
kbuild: refactor scripts/Makefile.modinst
kbuild: rename extmod-prefix to extmod_prefix
kbuild: check module name conflict for external modules as well
kbuild: show the target directory for depmod log
...
Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
- Improve Intel uncore PMU support:
- Parse uncore 'discovery tables' - a new hardware capability enumeration method
introduced on the latest Intel platforms. This table is in a well-defined PCI
namespace location and is read via MMIO. It is organized in an rbtree.
These uncore tables will allow the discovery of standard counter blocks, but
fancier counters still need to be enumerated explicitly.
- Add Alder Lake support
- Improve IIO stacks to PMON mapping support on Skylake servers
- Add Intel Alder Lake PMU support - which requires the introduction of 'hybrid' CPUs
and PMUs. Alder Lake is a mix of Golden Cove ('big') and Gracemont ('small' - Atom derived)
cores.
The CPU-side feature set is entirely symmetrical - but on the PMU side there's
core type dependent PMU functionality.
- Reduce data loss with CPU level hardware tracing on Intel PT / AUX profiling, by
fixing the AUX allocation watermark logic.
- Improve ring buffer allocation on NUMA systems
- Put 'struct perf_event' into their separate kmem_cache pool
- Add support for synchronous signals for select perf events. The immediate motivation
is to support low-overhead sampling-based race detection for user-space code. The
feature consists of the following main changes:
- Add thread-only event inheritance via perf_event_attr::inherit_thread, which limits
inheritance of events to CLONE_THREAD.
- Add the ability for events to not leak through exec(), via perf_event_attr::remove_on_exec.
- Allow the generation of SIGTRAP via perf_event_attr::sigtrap, extend siginfo with an u64
::si_perf, and add the breakpoint information to ::si_addr and ::si_perf if the event is
PERF_TYPE_BREAKPOINT.
The siginfo support is adequate for breakpoints right now - but the new field can be used
to introduce support for other types of metadata passed over siginfo as well.
- Misc fixes, cleanups and smaller updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NhQ7
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event updates from Ingo Molnar:
- Improve Intel uncore PMU support:
- Parse uncore 'discovery tables' - a new hardware capability
enumeration method introduced on the latest Intel platforms. This
table is in a well-defined PCI namespace location and is read via
MMIO. It is organized in an rbtree.
These uncore tables will allow the discovery of standard counter
blocks, but fancier counters still need to be enumerated
explicitly.
- Add Alder Lake support
- Improve IIO stacks to PMON mapping support on Skylake servers
- Add Intel Alder Lake PMU support - which requires the introduction of
'hybrid' CPUs and PMUs. Alder Lake is a mix of Golden Cove ('big')
and Gracemont ('small' - Atom derived) cores.
The CPU-side feature set is entirely symmetrical - but on the PMU
side there's core type dependent PMU functionality.
- Reduce data loss with CPU level hardware tracing on Intel PT / AUX
profiling, by fixing the AUX allocation watermark logic.
- Improve ring buffer allocation on NUMA systems
- Put 'struct perf_event' into their separate kmem_cache pool
- Add support for synchronous signals for select perf events. The
immediate motivation is to support low-overhead sampling-based race
detection for user-space code. The feature consists of the following
main changes:
- Add thread-only event inheritance via
perf_event_attr::inherit_thread, which limits inheritance of
events to CLONE_THREAD.
- Add the ability for events to not leak through exec(), via
perf_event_attr::remove_on_exec.
- Allow the generation of SIGTRAP via perf_event_attr::sigtrap,
extend siginfo with an u64 ::si_perf, and add the breakpoint
information to ::si_addr and ::si_perf if the event is
PERF_TYPE_BREAKPOINT.
The siginfo support is adequate for breakpoints right now - but the
new field can be used to introduce support for other types of
metadata passed over siginfo as well.
- Misc fixes, cleanups and smaller updates.
* tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
signal, perf: Add missing TRAP_PERF case in siginfo_layout()
signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architectures
perf/x86: Allow for 8<num_fixed_counters<16
perf/x86/rapl: Add support for Intel Alder Lake
perf/x86/cstate: Add Alder Lake CPU support
perf/x86/msr: Add Alder Lake CPU support
perf/x86/intel/uncore: Add Alder Lake support
perf: Extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE
perf/x86/intel: Add Alder Lake Hybrid support
perf/x86: Support filter_match callback
perf/x86/intel: Add attr_update for Hybrid PMUs
perf/x86: Add structures for the attributes of Hybrid PMUs
perf/x86: Register hybrid PMUs
perf/x86: Factor out x86_pmu_show_pmu_cap
perf/x86: Remove temporary pmu assignment in event_init
perf/x86/intel: Factor out intel_pmu_check_extra_regs
perf/x86/intel: Factor out intel_pmu_check_event_constraints
perf/x86/intel: Factor out intel_pmu_check_num_counters
perf/x86: Hybrid PMU support for extra_regs
perf/x86: Hybrid PMU support for event constraints
...
- Bitmap support for "N" as alias for last bit
- kvfree_rcu updates
- mm_dump_obj() updates. (One of these is to mm, but was suggested by Andrew Morton.)
- RCU callback offloading update
- Polling RCU grace-period interfaces
- Realtime-related RCU updates
- Tasks-RCU updates
- Torture-test updates
- Torture-test scripting updates
- Miscellaneous fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mpNt
-----END PGP SIGNATURE-----
Merge tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
- Support for "N" as alias for last bit in bitmap parsing library (eg
using syntax like "nohz_full=2-N")
- kvfree_rcu updates
- mm_dump_obj() updates. (One of these is to mm, but was suggested by
Andrew Morton.)
- RCU callback offloading update
- Polling RCU grace-period interfaces
- Realtime-related RCU updates
- Tasks-RCU updates
- Torture-test updates
- Torture-test scripting updates
- Miscellaneous fixes
* tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
rcutorture: Test start_poll_synchronize_rcu() and poll_state_synchronize_rcu()
rcu: Provide polling interfaces for Tiny RCU grace periods
torture: Fix kvm.sh --datestamp regex check
torture: Consolidate qemu-cmd duration editing into kvm-transform.sh
torture: Print proper vmlinux path for kvm-again.sh runs
torture: Make TORTURE_TRUST_MAKE available in kvm-again.sh environment
torture: Make kvm-transform.sh update jitter commands
torture: Add --duration argument to kvm-again.sh
torture: Add kvm-again.sh to rerun a previous torture-test
torture: Create a "batches" file for build reuse
torture: De-capitalize TORTURE_SUITE
torture: Make upper-case-only no-dot no-slash scenario names official
torture: Rename SRCU-t and SRCU-u to avoid lowercase characters
torture: Remove no-mpstat error message
torture: Record kvm-test-1-run.sh and kvm-test-1-run-qemu.sh PIDs
torture: Record jitter start/stop commands
torture: Extract kvm-test-1-run-qemu.sh from kvm-test-1-run.sh
torture: Record TORTURE_KCONFIG_GDB_ARG in qemu-cmd
torture: Abstract jitter.sh start/stop into scripts
rcu: Provide polling interfaces for Tree RCU grace periods
...
This Kselftest update for Linux 5.13-rc1 consists of:
- fixes and updates to resctrl test from Fenghua Yu and Reinette Chatre
- fixes to Kselftest documentation, framework
- minor spelling correction in timers test
-----BEGIN PGP SIGNATURE-----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=0VC+
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
- fixes and updates to resctrl test from Fenghua Yu and Reinette Chatre
- fixes to Kselftest documentation, framework
- minor spelling correction in timers test
* tag 'linux-kselftest-next-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
selftests/resctrl: Change a few printed messages
Documentation: kselftest: fix path to test module files
selftests/resctrl: Create .gitignore to include resctrl_tests
selftests/resctrl: Fix checking for < 0 for unsigned values
selftests/resctrl: Fix incorrect parsing of iMC counters
selftests/resctrl: Fix unmount resctrl FS
selftests/resctrl: Skip the test if requested resctrl feature is not supported
selftests/resctrl: Modularize resctrl test suite main() function
selftests/resctrl: Don't hard code value of "no_of_bits" variable
selftests/resctrl: Fix MBA/MBM results reporting format
selftests/resctrl: Use resctrl/info for feature detection
selftests/resctrl: Check for resctrl mount point only if resctrl FS is supported
selftests/resctrl: Add config dependencies
selftests/resctrl: Fix a printed message
selftests/resctrl: Share show_cache_info() by CAT and CMT tests
selftests/resctrl: Call kselftest APIs to log test results
selftests/resctrl: Rename CQM test as CMT test
selftests/resctrl: Fix missing options "-n" and "-p"
selftests/resctrl: Ensure sibling CPU is not same as original CPU
selftests/resctrl: Clean up resctrl features check
...
Similarly as b02709587e ("bpf: Fix propagation of 32-bit signed bounds
from 64-bit bounds."), we also need to fix the propagation of 32 bit
unsigned bounds from 64 bit counterparts. That is, really only set the
u32_{min,max}_value when /both/ {umin,umax}_value safely fit in 32 bit
space. For example, the register with a umin_value == 1 does /not/ imply
that u32_min_value is also equal to 1, since umax_value could be much
larger than 32 bit subregister can hold, and thus u32_min_value is in
the interval [0,1] instead.
Before fix, invalid tracking result of R2_w=inv1:
[...]
5: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0) R10=fp0
5: (35) if r2 >= 0x1 goto pc+1
[...] // goto path
7: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umin_value=1) R10=fp0
7: (b6) if w2 <= 0x1 goto pc+1
[...] // goto path
9: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,smin_value=-9223372036854775807,smax_value=9223372032559808513,umin_value=1,umax_value=18446744069414584321,var_off=(0x1; 0xffffffff00000000),s32_min_value=1,s32_max_value=1,u32_max_value=1) R10=fp0
9: (bc) w2 = w2
10: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv1 R10=fp0
[...]
After fix, correct tracking result of R2_w=inv(id=0,umax_value=1,var_off=(0x0; 0x1)):
[...]
5: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0) R10=fp0
5: (35) if r2 >= 0x1 goto pc+1
[...] // goto path
7: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umin_value=1) R10=fp0
7: (b6) if w2 <= 0x1 goto pc+1
[...] // goto path
9: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,smax_value=9223372032559808513,umax_value=18446744069414584321,var_off=(0x0; 0xffffffff00000001),s32_min_value=0,s32_max_value=1,u32_max_value=1) R10=fp0
9: (bc) w2 = w2
10: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,umax_value=1,var_off=(0x0; 0x1)) R10=fp0
[...]
Thus, same issue as in b02709587e holds for unsigned subregister tracking.
Also, align __reg64_bound_u32() similarly to __reg64_bound_s32() as done in
b02709587e to make them uniform again.
Fixes: 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Manfred Paul (@_manfp)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Fix failed tests checks in core_reloc test runner, which allowed failing tests
to pass quietly. Also add extra check to make sure that expected to fail test cases with
invalid names are caught as test failure anyway, as this is not an expected
failure mode. Also fix mislabeled probed vs direct bitfield test cases.
Fixes: 124a892d1c ("selftests/bpf: Test TYPE_EXISTS and TYPE_SIZE CO-RE relocations")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-6-andrii@kernel.org
Negative field existence cases for have a broken assumption that FIELD_EXISTS
CO-RE relo will fail for fields that match the name but have incompatible type
signature. That's not how CO-RE relocations generally behave. Types and fields
that match by name but not by expected type are treated as non-matching
candidates and are skipped. Error later is reported if no matching candidate
was found. That's what happens for most relocations, but existence relocations
(FIELD_EXISTS and TYPE_EXISTS) are more permissive and they are designed to
return 0 or 1, depending if a match is found. This allows to handle
name-conflicting but incompatible types in BPF code easily. Combined with
___flavor suffixes, it's possible to handle pretty much any structural type
changes in kernel within the compiled once BPF source code.
So, long story short, negative field existence test cases are invalid in their
assumptions, so this patch reworks them into a single consolidated positive
case that doesn't match any of the fields.
Fixes: c7566a6969 ("selftests/bpf: Add field existence CO-RE relocs tests")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-5-andrii@kernel.org
Add ASSERT_TRUE/ASSERT_FALSE for conditions calculated with custom logic to
true/false. Also add remaining arithmetical assertions:
- ASSERT_LE -- less than or equal;
- ASSERT_GT -- greater than;
- ASSERT_GE -- greater than or equal.
This should cover most scenarios where people fall back to error-prone
CHECK()s.
Also extend ASSERT_ERR() to print out errno, in addition to direct error.
Also convert few CHECK() instances to ensure new ASSERT_xxx() variants work as
expected. Subsequent patch will also use ASSERT_TRUE/ASSERT_FALSE more
extensively.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-2-andrii@kernel.org
Here is the "big" set of driver core changes for 5.13-rc1.
Nothing major, just lots of little core changes and cleanups, notable
things are:
- finally set fw_devlink=on by default. All reported issues
with this have been shaken out over the past 9 months or so,
but we will be paying attention to any fallout here in case we
need to revert this as the default boot value (symptoms of
problems are a simple lack of booting)
- fixes found to be needed by fw_devlink=on value in some
subsystems (like clock).
- delayed work initialization cleanup
- driver core cleanups and minor updates
- software node cleanups and tweaks
- devtmpfs cleanups
- minor debugfs cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIazPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylzUwCguQ+VUs1d0voq/oKiqR+lbXnQf3kAn0jf/eom
ucRSdeIc21eEE83Ei9aZ
=pchl
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core changes for 5.13-rc1.
Nothing major, just lots of little core changes and cleanups, notable
things are:
- finally set 'fw_devlink=on' by default.
All reported issues with this have been shaken out over the past 9
months or so, but we will be paying attention to any fallout here
in case we need to revert this as the default boot value (symptoms
of problems are a simple lack of booting)
- fixes found to be needed by fw_devlink=on value in some subsystems
(like clock).
- delayed work initialization cleanup
- driver core cleanups and minor updates
- software node cleanups and tweaks
- devtmpfs cleanups
- minor debugfs cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (53 commits)
devm-helpers: Fix devm_delayed_work_autocancel() kerneldoc
PM / wakeup: use dev_set_name() directly
software node: Allow node addition to already existing device
kunit: software node: adhear to KUNIT formatting standard
node: fix device cleanups in error handling code
kobject_uevent: remove warning in init_uevent_argv()
debugfs: Make debugfs_allow RO after init
Revert "driver core: platform: Make platform_get_irq_optional() optional"
media: ipu3-cio2: Switch to use SOFTWARE_NODE_REFERENCE()
software node: Introduce SOFTWARE_NODE_REFERENCE() helper macro
software node: Imply kobj_to_swnode() to be no-op
software node: Deduplicate code in fwnode_create_software_node()
software node: Introduce software_node_alloc()/software_node_free()
software node: Free resources explicitly when swnode_register() fails
debugfs: drop pointless nul-termination in debugfs_read_file_bool()
driver core: add helper for deferred probe reason setting
driver core: Improve fw_devlink & deferred_probe_timeout interaction
of: property: fw_devlink: Add support for remote-endpoint
driver core: platform: Make platform_get_irq_optional() optional
driver core: Replace printf() specifier and drop unneeded casting
...
- MTE asynchronous support for KASan. Previously only synchronous
(slower) mode was supported. Asynchronous is faster but does not allow
precise identification of the illegal access.
- Run kernel mode SIMD with softirqs disabled. This allows using NEON in
softirq context for crypto performance improvements. The conditional
yield support is modified to take softirqs into account and reduce the
latency.
- Preparatory patches for Apple M1: handle CPUs that only have the VHE
mode available (host kernel running at EL2), add FIQ support.
- arm64 perf updates: support for HiSilicon PA and SLLC PMU drivers, new
functions for the HiSilicon HHA and L3C PMU, cleanups.
- Re-introduce support for execute-only user permissions but only when
the EPAN (Enhanced Privileged Access Never) architecture feature is
available.
- Disable fine-grained traps at boot and improve the documented boot
requirements.
- Support CONFIG_KASAN_VMALLOC on arm64 (only with KASAN_GENERIC).
- Add hierarchical eXecute Never permissions for all page tables.
- Add arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) allowing user programs
to control which PAC keys are enabled in a particular task.
- arm64 kselftests for BTI and some improvements to the MTE tests.
- Minor improvements to the compat vdso and sigpage.
- Miscellaneous cleanups.
-----BEGIN PGP SIGNATURE-----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=6NGI
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- MTE asynchronous support for KASan. Previously only synchronous
(slower) mode was supported. Asynchronous is faster but does not
allow precise identification of the illegal access.
- Run kernel mode SIMD with softirqs disabled. This allows using NEON
in softirq context for crypto performance improvements. The
conditional yield support is modified to take softirqs into account
and reduce the latency.
- Preparatory patches for Apple M1: handle CPUs that only have the VHE
mode available (host kernel running at EL2), add FIQ support.
- arm64 perf updates: support for HiSilicon PA and SLLC PMU drivers,
new functions for the HiSilicon HHA and L3C PMU, cleanups.
- Re-introduce support for execute-only user permissions but only when
the EPAN (Enhanced Privileged Access Never) architecture feature is
available.
- Disable fine-grained traps at boot and improve the documented boot
requirements.
- Support CONFIG_KASAN_VMALLOC on arm64 (only with KASAN_GENERIC).
- Add hierarchical eXecute Never permissions for all page tables.
- Add arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) allowing user programs
to control which PAC keys are enabled in a particular task.
- arm64 kselftests for BTI and some improvements to the MTE tests.
- Minor improvements to the compat vdso and sigpage.
- Miscellaneous cleanups.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (86 commits)
arm64/sve: Add compile time checks for SVE hooks in generic functions
arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG.
arm64: pac: Optimize kernel entry/exit key installation code paths
arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS)
arm64: mte: make the per-task SCTLR_EL1 field usable elsewhere
arm64/sve: Remove redundant system_supports_sve() tests
arm64: fpsimd: run kernel mode NEON with softirqs disabled
arm64: assembler: introduce wxN aliases for wN registers
arm64: assembler: remove conditional NEON yield macros
kasan, arm64: tests supports for HW_TAGS async mode
arm64: mte: Report async tag faults before suspend
arm64: mte: Enable async tag check fault
arm64: mte: Conditionally compile mte_enable_kernel_*()
arm64: mte: Enable TCO in functions that can read beyond buffer limits
kasan: Add report for async mode
arm64: mte: Drop arch_enable_tagging()
kasan: Add KASAN mode kernel parameter
arm64: mte: Add asynchronous mode support
arm64: Get rid of CONFIG_ARM64_VHE
arm64: Cope with CPUs stuck in VHE mode
...
Provide support for randomized stack offsets per syscall to make
stack-based attacks harder which rely on the deterministic stack layout.
The feature is based on the original idea of PaX's RANDSTACK feature, but
uses a significantly different implementation.
The offset does not affect the pt_regs location on the task stack as this
was agreed on to be of dubious value. The offset is applied before the
actual syscall is invoked.
The offset is stored per cpu and the randomization happens at the end of
the syscall which is less predictable than on syscall entry.
The mechanism to apply the offset is via alloca(), i.e. abusing the
dispised VLAs. This comes with the drawback that stack-clash-protection
has to be disabled for the affected compilation units and there is also
a negative interaction with stack-protector.
Those downsides are traded with the advantage that this approach does not
require any intrusive changes to the low level assembly entry code, does
not affect the unwinder and the correct stack alignment is handled
automatically by the compiler.
The feature is guarded with a static branch which avoids the overhead when
disabled.
Currently this is supported for X86 and ARM64.
-----BEGIN PGP SIGNATURE-----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=GMlJ
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull entry code update from Thomas Gleixner:
"Provide support for randomized stack offsets per syscall to make
stack-based attacks harder which rely on the deterministic stack
layout.
The feature is based on the original idea of PaX's RANDSTACK feature,
but uses a significantly different implementation.
The offset does not affect the pt_regs location on the task stack as
this was agreed on to be of dubious value. The offset is applied
before the actual syscall is invoked.
The offset is stored per cpu and the randomization happens at the end
of the syscall which is less predictable than on syscall entry.
The mechanism to apply the offset is via alloca(), i.e. abusing the
dispised VLAs. This comes with the drawback that
stack-clash-protection has to be disabled for the affected compilation
units and there is also a negative interaction with stack-protector.
Those downsides are traded with the advantage that this approach does
not require any intrusive changes to the low level assembly entry
code, does not affect the unwinder and the correct stack alignment is
handled automatically by the compiler.
The feature is guarded with a static branch which avoids the overhead
when disabled.
Currently this is supported for X86 and ARM64"
* tag 'x86-entry-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64: entry: Enable random_kstack_offset support
lkdtm: Add REPORT_STACK for checking stack offsets
x86/entry: Enable random_kstack_offset support
stack: Optionally randomize kernel stack offset each syscall
init_on_alloc: Optimize static branches
jump_label: Provide CONFIG-driven build state defaults
Core changes:
- Allow runtime power management when the clocksource is changed.
- A correctness fix for clock_adjtime32() so that the return value
on success is not overwritten by the result of the copy to user.
- Allow late installment of broadcast clockevent devices which was
broken because nothing switched them over to oneshot mode. This went
unnoticed so far because clockevent devices used to be built in, but
now people started to make them modular.
- Debugfs related simplifications
- Small cleanups and improvements here and there
Driver changes:
- The usual set of device tree binding updates for a wide range
of drivers/devices.
- The usual updates and improvements for drivers all over the place but
nothing outstanding.
- No new clocksource/event drivers. They'll come back next time.
-----BEGIN PGP SIGNATURE-----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=F6Du
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The time and timers updates contain:
Core changes:
- Allow runtime power management when the clocksource is changed.
- A correctness fix for clock_adjtime32() so that the return value on
success is not overwritten by the result of the copy to user.
- Allow late installment of broadcast clockevent devices which was
broken because nothing switched them over to oneshot mode. This
went unnoticed so far because clockevent devices used to be built
in, but now people started to make them modular.
- Debugfs related simplifications
- Small cleanups and improvements here and there
Driver changes:
- The usual set of device tree binding updates for a wide range of
drivers/devices.
- The usual updates and improvements for drivers all over the place
but nothing outstanding.
- No new clocksource/event drivers. They'll come back next time"
* tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
posix-timers: Preserve return value in clock_adjtime32()
tick/broadcast: Allow late registered device to enter oneshot mode
tick: Use tick_check_replacement() instead of open coding it
time/timecounter: Mark 1st argument of timecounter_cyc2time() as const
dt-bindings: timer: nuvoton,npcm7xx: Add wpcm450-timer
clocksource/drivers/arm_arch_timer: Add __ro_after_init and __init
clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue
clocksource/drivers/dw_apb_timer_of: Add handling for potential memory leak
clocksource/drivers/npcm: Add support for WPCM450
clocksource/drivers/sh_cmt: Don't use CMTOUT_IE with R-Car Gen2/3
clocksource/drivers/pistachio: Fix trivial typo
clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe()
clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped
clocksource/drivers/timer-ti-dm: Fix posted mode status check order
dt-bindings: timer: renesas,cmt: Document R8A77961
dt-bindings: timer: renesas,cmt: Add r8a779a0 CMT support
clocksource/drivers/ingenic-ost: Add support for the JZ4760B
clocksource/drivers/ingenic: Add support for the JZ4760
dt-bindings: timer: ingenic: Add compatible strings for JZ4760(B)
...
After commit 4fc096a99e ("KVM: Raise the maximum number of user memslots")
set_memory_region_test may take too long, reports are that the default
timeout value we have (120s) may not be enough even on a physical host.
Speed things up a bit by throwing away vm_userspace_mem_region_add() usage
from test_add_max_memory_regions(), we don't really need to do the majority
of the stuff it does for the sake of this test.
On my AMD EPYC 7401P, # time ./set_memory_region_test
pre-patch:
Testing KVM_RUN with zero added memory regions
Allowed number of memory slots: 32764
Adding slots 0..32763, each memory region with 2048K size
Testing MOVE of in-use region, 10 loops
Testing DELETE of in-use region, 10 loops
real 0m44.917s
user 0m7.416s
sys 0m34.601s
post-patch:
Testing KVM_RUN with zero added memory regions
Allowed number of memory slots: 32764
Adding slots 0..32763, each memory region with 2048K size
Testing MOVE of in-use region, 10 loops
Testing DELETE of in-use region, 10 loops
real 0m20.714s
user 0m0.109s
sys 0m18.359s
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210426130121.758229-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Christopherson, Kai Huang and Jarkko Sakkinen. Along with the usual
fixes, cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=KFYo
-----END PGP SIGNATURE-----
Merge tag 'x86_sgx_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Borislav Petkov:
"Add the guest side of SGX support in KVM guests. Work by Sean
Christopherson, Kai Huang and Jarkko Sakkinen.
Along with the usual fixes, cleanups and improvements"
* tag 'x86_sgx_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/sgx: Mark sgx_vepc_vm_ops static
x86/sgx: Do not update sgx_nr_free_pages in sgx_setup_epc_section()
x86/sgx: Move provisioning device creation out of SGX driver
x86/sgx: Add helpers to expose ECREATE and EINIT to KVM
x86/sgx: Add helper to update SGX_LEPUBKEYHASHn MSRs
x86/sgx: Add encls_faulted() helper
x86/sgx: Add SGX2 ENCLS leaf definitions (EAUG, EMODPR and EMODT)
x86/sgx: Move ENCLS leaf definitions to sgx.h
x86/sgx: Expose SGX architectural definitions to the kernel
x86/sgx: Initialize virtual EPC driver even when SGX driver is disabled
x86/cpu/intel: Allow SGX virtualization without Launch Control support
x86/sgx: Introduce virtual EPC for use by KVM guests
x86/sgx: Add SGX_CHILD_PRESENT hardware error code
x86/sgx: Wipe out EREMOVE from sgx_free_epc_page()
x86/cpufeatures: Add SGX1 and SGX2 sub-features
x86/cpufeatures: Make SGX_LC feature bit depend on SGX bit
x86/sgx: Remove unnecessary kmap() from sgx_ioc_enclave_init()
selftests/sgx: Use getauxval() to simplify test code
selftests/sgx: Improve error detection and messages
x86/sgx: Add a basic NUMA allocation scheme to sgx_alloc_epc_page()
...
bit definitions in a separate csv file which allows for adding support
for new CPUID leafs and bits without having to update the tool. The main
use case for the tool is hw enablement on preproduction x86 hw.
-----BEGIN PGP SIGNATURE-----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=G/Um
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 tool update from Borislav Petkov:
"A new kcpuid tool to dump the raw CPUID leafs of a CPU.
It has the CPUID bit definitions in a separate csv file which allows
for adding support for new CPUID leafs and bits without having to
update the tool.
The main use case for the tool is hw enablement on preproduction x86
hardware"
* tag 'x86_misc_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/x86/kcpuid: Add AMD leaf 0x8000001E
tools/x86/kcpuid: Check last token too
selftests/x86: Add a missing .note.GNU-stack section to thunks_32.S
tools/x86/kcpuid: Add AMD Secure Encryption leaf
tools/x86: Add a kcpuid tool to show raw CPU features
In vm_vcpu_rm() and kvm_vm_release(), a stale return value is checked in
TEST_ASSERT macro.
Fix it by assigning variable ret with correct return value.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20210426193138.118276-1-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adding test to verify that once we attach module's trampoline,
the module can't be unloaded.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210414195147.1624932-7-jolsa@kernel.org
Adding the test to re-attach (detach/attach again) lsm programs,
plus check that already linked program can't be attached again.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210414195147.1624932-6-jolsa@kernel.org
Adding the test to re-attach (detach/attach again) tracing
fexit programs, plus check that already linked program can't
be attached again.
Also switching to ASSERT* macros.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210414195147.1624932-5-jolsa@kernel.org
Adding the test to re-attach (detach/attach again) tracing
fentry programs, plus check that already linked program can't
be attached again.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210414195147.1624932-4-jolsa@kernel.org
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 69 non-merge commits during the last 22 day(s) which contain
a total of 69 files changed, 3141 insertions(+), 866 deletions(-).
The main changes are:
1) Add BPF static linker support for extern resolution of global, from Andrii.
2) Refine retval for bpf_get_task_stack helper, from Dave.
3) Add a bpf_snprintf helper, from Florent.
4) A bunch of miscellaneous improvements from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 57fd251c78 ("kbuild: split cc-option and friends to
scripts/Makefile.compiler"), some kselftests fail to build.
The tools/ directory opted out Kbuild, and went in a different
direction. People copied scripts and Makefiles to the tools/ directory
to create their own build system.
tools/build/Build.include mimics scripts/Kbuild.include, but some
tool Makefiles include the Kbuild one to import a feature that is
missing in tools/build/Build.include:
- Commit ec04aa3ae8 ("tools/thermal: tmon: use "-fstack-protector"
only if supported") included scripts/Kbuild.include from
tools/thermal/tmon/Makefile to import the cc-option macro.
- Commit c2390f16fc ("selftests: kvm: fix for compilers that do
not support -no-pie") included scripts/Kbuild.include from
tools/testing/selftests/kvm/Makefile to import the try-run macro.
- Commit 9cae4ace80 ("selftests/bpf: do not ignore clang
failures") included scripts/Kbuild.include from
tools/testing/selftests/bpf/Makefile to import the .DELETE_ON_ERROR
target.
- Commit 0695f8bca9 ("selftests/powerpc: Handle Makefile for
unrecognized option") included scripts/Kbuild.include from
tools/testing/selftests/powerpc/pmu/ebb/Makefile to import the
try-run macro.
Copy what they need into tools/build/Build.include, and make them
include it instead of scripts/Kbuild.include.
Link: https://lore.kernel.org/lkml/86dadf33-70f7-a5ac-cb8c-64966d2f45a1@linux.ibm.com/
Fixes: 57fd251c78 ("kbuild: split cc-option and friends to scripts/Makefile.compiler")
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
We found that with the latest mainline kernel (5.12.0-051200rc8) on
some KVM instances / bare-metal systems, the following tests will take
longer than the kselftest framework default timeout (45 seconds) to
run and thus got terminated with TIMEOUT error:
* xfrm_policy.sh - took about 2m20s
* pmtu.sh - took about 3m5s
* udpgso_bench.sh - took about 60s
Bump the timeout setting to 5 minutes to allow them have a chance to
finish.
https://bugs.launchpad.net/bugs/1856010
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend mptcp_connect tool with MSG_PEEK support and add a test case in
mptcp_connect.sh that checks the data received from/after recv() with
MSG_PEEK.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add selftest validating various aspects of statically linking BTF-defined map
definitions. Legacy map definitions do not support extern resolution between
object files. Some of the aspects validated:
- correct resolution of extern maps against concrete map definitions;
- extern maps can currently only specify map type and key/value size and/or
type information;
- weak concrete map definitions are resolved properly.
Static map definitions are not yet supported by libbpf, so they are not
explicitly tested, though manual testing showes that BPF linker handles them
properly.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-18-andrii@kernel.org
Add selftest validating various aspects of statically linking functions:
- no conflicts and correct resolution for name-conflicting static funcs;
- correct resolution of extern functions;
- correct handling of weak functions, both resolution itself and libbpf's
handling of unused weak function that "lost" (it leaves gaps in code with
no ELF symbols);
- correct handling of hidden visibility to turn global function into
"static" for the purpose of BPF verification.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-16-andrii@kernel.org
Skip generating individual BPF skeletons for files that are supposed to be
linked together to form the final BPF object file. Very often such files are
"incomplete" BPF object files, which will fail libbpf bpf_object__open() step,
if used individually, thus failing BPF skeleton generation. This is by design,
so skip individual BPF skeletons and only validate them as part of their
linked final BPF object file and skeleton.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-15-andrii@kernel.org
While -Og is designed to work well with debugger, it's still inferior to -O0
in terms of debuggability experience. It will cause some variables to still be
inlined, it will also prevent single-stepping some statements and otherwise
interfere with debugging experience. So switch to -O0 which turns off any
optimization and provides the best debugging experience.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-14-andrii@kernel.org
The mirror_gre_scale test creates as many ERSPAN sessions as the underlying
chip supports, and tests that they all work. In order to determine that it
issues a stream of ICMP packets and checks if they are mirrored as
expected.
However, the mausezahn invocation missed the -6 flag to identify the use of
IPv6 protocol, and was sending ICMP messages over IPv6, as opposed to
ICMP6. It also didn't pass an explicit source IP address, which apparently
worked at some point in the past, but does not anymore.
To fix these issues, extend the function mirror_test() in mirror_lib by
detecting the IPv6 protocol addresses, and using a different ICMP scheme.
Fix __mirror_gre_test() in the selftest itself to pass a source IP address.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The intention behind this test is to make sure that qdisc limit is
correctly projected to the HW. However, first, due to rounding in the
qdisc, and then in the driver, the number cannot actually be accurate. And
second, the approach to testing this is to oversubscribe the port with
traffic generated on the same switch. The actual backlog size therefore
fluctuates.
In practice, this test proved to be noisier than the rest, and spuriously
fails every now and then. Increase the tolerance to 10 % to avoid these
issues.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the resource scale test checks a few cases, when the error code
resets between the cases. So for example, if one case fails and the
consecutive case passes, the error code eventually will fit the last test
and will be 0.
Save a new return code that will hold the 'or' return codes of all the
cases, so the final return code will consider all the cases.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the error return code of the failure condition is lost after
using an if statement, so the test doesn't fail when it should.
Remove the if statement that separates the condition and the error code
check, so the test won't always pass.
Fixes: abfce9e062 ("selftests: mlxsw: Reduce running time using offload indication")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the error return code of the failure condition is lost after
using an if statement, so the test doesn't fail when it should.
Remove the if statement that separates the condition and the error code
check, so the test won't always pass.
Fixes: 5154b1b826 ("selftests: mlxsw: Add a scale test for physical ports")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The FDB roaming test installs a destination MAC address on the wrong
interface of an FDB database and tests whether the mirroring fails, because
packets are sent to the wrong port. The test by mistake installs the FDB
entry as local. This worked previously, because drivers were notified of
local FDB entries in the same way as of static entries. However that has
been fixed in the commit 6ab4c3117a ("net: bridge: don't notify switchdev
for local FDB addresses"), and local entries are not notified anymore. As a
result, the HW is not reconfigured for the FDB roam, and mirroring keeps
working, failing the test.
To fix the issue, mark the FDB entry as static.
Fixes: 9c7c8a8244 ("selftests: forwarding: mirror_gre_vlan_bridge_1q: Add more tests")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New features:
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
- Alexandru is now a reviewer (not really a new feature...)
Fixes:
- Proper emulation of the GICR_TYPER register
- Handle the complete set of relocation in the nVHE EL2 object
- Get rid of the oprofile dependency in the PMU code (and of the
oprofile body parts at the same time)
- Debug and SPE fixes
- Fix vcpu reset
-----BEGIN PGP SIGNATURE-----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=fpey
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.13
New features:
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
- Alexandru is now a reviewer (not really a new feature...)
Fixes:
- Proper emulation of the GICR_TYPER register
- Handle the complete set of relocation in the nVHE EL2 object
- Get rid of the oprofile dependency in the PMU code (and of the
oprofile body parts at the same time)
- Debug and SPE fixes
- Fix vcpu reset
The alignment of a structure is that of its largest member. On
architectures like 32-bit Arm (but not e.g. 32-bit x86) 64-bit integers
will require 64-bit alignment and not its natural word size.
This means that there is no portable way to add 64-bit integers to
siginfo_t on 32-bit architectures without breaking the ABI, because
siginfo_t does not yet (and therefore likely never will) contain 64-bit
fields on 32-bit architectures. Adding a 64-bit integer could change the
alignment of the union after the 3 initial int si_signo, si_errno,
si_code, thus introducing 4 bytes of padding shifting the entire union,
which would break the ABI.
One alternative would be to use the __packed attribute, however, it is
non-standard C. Given siginfo_t has definitions outside the Linux kernel
in various standard libraries that can be compiled with any number of
different compilers (not just those we rely on), using non-standard
attributes on siginfo_t should be avoided to ensure portability.
In the case of the si_perf field, word size is sufficient since there is
no exact requirement on size, given the data it contains is user-defined
via perf_event_attr::sig_data. On 32-bit architectures, any excess bits
of perf_event_attr::sig_data will therefore be truncated when copying
into si_perf.
Since si_perf is intended to disambiguate events (e.g. encoding relevant
information if there are more events of the same type), 32 bits should
provide enough entropy to do so on 32-bit architectures.
For 64-bit architectures, no change is intended.
Fixes: fb6cc127e0 ("signal: Introduce TRAP_PERF si_code and si_perf to siginfo")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lkml.kernel.org/r/20210422191823.79012-1-elver@google.com
Add a new flag LANDLOCK_CREATE_RULESET_VERSION to
landlock_create_ruleset(2). This enables to retreive a Landlock ABI
version that is useful to efficiently follow a best-effort security
approach. Indeed, it would be a missed opportunity to abort the whole
sandbox building, because some features are unavailable, instead of
protecting users as much as possible with the subset of features
provided by the running kernel.
This new flag enables user space to identify the minimum set of Landlock
features supported by the running kernel without relying on a filesystem
interface (e.g. /proc/version, which might be inaccessible) nor testing
multiple syscall argument combinations (i.e. syscall bisection). New
Landlock features will be documented and tied to a minimum version
number (greater than 1). The current version will be incremented for
each new kernel release supporting new Landlock features. User space
libraries can leverage this information to seamlessly restrict processes
as much as possible while being compatible with newer APIs.
This is a much more lighter approach than the previous
landlock_get_features(2): the complexity is pushed to user space
libraries. This flag meets similar needs as securityfs versions:
selinux/policyvers, apparmor/features/*/version* and tomoyo/version.
Supporting this flag now will be convenient for backward compatibility.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210422154123.13086-14-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
Test all Landlock system calls, ptrace hooks semantic and filesystem
access-control with multiple layouts.
Test coverage for security/landlock/ is 93.6% of lines. The code not
covered only deals with internal kernel errors (e.g. memory allocation)
and race conditions.
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Vincent Dagonneau <vincent.dagonneau@ssi.gouv.fr>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-11-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
Eliminate the following coccicheck warning:
./tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c:327:4-5: Unneeded
semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1612780870-95890-1-git-send-email-yang.lee@linux.alibaba.com
ptrace and perf watchpoints can't co-exists if their address range
overlaps. See commit 29da4f91c0 ("powerpc/watchpoint: Don't allow
concurrent perf and ptrace events") for more detail. Add selftest
for the same.
Sample o/p:
# ./ptrace-perf-hwbreak
test: ptrace-perf-hwbreak
tags: git_version:powerpc-5.8-7-118-g937fa174a15d-dirty
perf cpu event -> ptrace thread event (Overlapping): Ok
perf cpu event -> ptrace thread event (Non-overlapping): Ok
perf thread event -> ptrace same thread event (Overlapping): Ok
perf thread event -> ptrace same thread event (Non-overlapping): Ok
perf thread event -> ptrace other thread event: Ok
ptrace thread event -> perf kernel event: Ok
ptrace thread event -> perf same thread event (Overlapping): Ok
ptrace thread event -> perf same thread event (Non-overlapping): Ok
ptrace thread event -> perf other thread event: Ok
ptrace thread event -> perf cpu event (Overlapping): Ok
ptrace thread event -> perf cpu event (Non-overlapping): Ok
ptrace thread event -> perf same thread & cpu event (Overlapping): Ok
ptrace thread event -> perf same thread & cpu event (Non-overlapping): Ok
ptrace thread event -> perf other thread & cpu event: Ok
success: ptrace-perf-hwbreak
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412112218.128183-5-ravi.bangoria@linux.ibm.com
Extend perf-hwbreak.c selftest to test multiple DAWRs. Also add
testcase for testing 512 byte boundary removal.
Sample o/p:
# ./perf-hwbreak
...
TESTED: Process specific, Two events, diff addr
TESTED: Process specific, Two events, same addr
TESTED: Process specific, Two events, diff addr, one is RO, other is WO
TESTED: Process specific, Two events, same addr, one is RO, other is WO
TESTED: Systemwide, Two events, diff addr
TESTED: Systemwide, Two events, same addr
TESTED: Systemwide, Two events, diff addr, one is RO, other is WO
TESTED: Systemwide, Two events, same addr, one is RO, other is WO
TESTED: Process specific, 512 bytes, unaligned
success: perf_hwbreak
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412112218.128183-4-ravi.bangoria@linux.ibm.com
perf-hwbreak selftest opens hw-breakpoint event at multiple places for
which it has same code repeated. Coalesce that code into a function.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412112218.128183-3-ravi.bangoria@linux.ibm.com
Also based on the RFI and entry flush tests, it counts the L1D misses
by doing a syscall that does user access: uname, in this case.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
[dja: forward port, rename function]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225061949.1213404-1-dja@axtens.net
The main thread could start to send SIG_IPI at any time, even before signal
blocked on vcpu thread. Therefore, start the vcpu thread with the signal
blocked.
Without this patch, on very busy cores the dirty_log_test could fail directly
on receiving a SIGUSR1 without a handler (when vcpu runs far slower than main).
Reported-by: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a bug that can trigger with e.g. "taskset -c 0 ./dirty_log_test" or
when the testing host is very busy.
A similar previous attempt is done [1] but that is not enough, the reason is
stated in the reply [2].
As a summary (partly quotting from [2]):
The problem is I think one guest memory write operation (of this specific test)
contains a few micro-steps when page is during kvm dirty tracking (here I'm
only considering write-protect rather than pml but pml should be similar at
least when the log buffer is full):
(1) Guest read 'iteration' number into register, prepare to write, page fault
(2) Set dirty bit in either dirty bitmap or dirty ring
(3) Return to guest, data written
When we verify the data, we assumed that all these steps are "atomic", say,
when (1) happened for this page, we assume (2) & (3) must have happened. We
had some trick to workaround "un-atomicity" of above three steps, as previous
version of this patch wanted to fix atomicity of step (2)+(3) by explicitly
letting the main thread wait for at least one vmenter of vcpu thread, which
should work. However what I overlooked is probably that we still have race
when (1) and (2) can be interrupted.
One example calltrace when it could happen that we read an old interation, got
interrupted before even setting the dirty bit and flushing data:
__schedule+1742
__cond_resched+52
__get_user_pages+530
get_user_pages_unlocked+197
hva_to_pfn+206
try_async_pf+132
direct_page_fault+320
kvm_mmu_page_fault+103
vmx_handle_exit+288
vcpu_enter_guest+2460
kvm_arch_vcpu_ioctl_run+325
kvm_vcpu_ioctl+526
__x64_sys_ioctl+131
do_syscall_64+51
entry_SYSCALL_64_after_hwframe+68
It means iteration number cached in vcpu register can be very old when dirty
bit set and data flushed.
So far I don't see an easy way to guarantee all steps 1-3 atomicity but to sync
at the GUEST_SYNC() point of guest code when we do verification of the dirty
bits as what this patch does.
[1] https://lore.kernel.org/lkml/20210413213641.23742-1-peterx@redhat.com/
[2] https://lore.kernel.org/lkml/20210417140956.GV4440@xz-x1/
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210417143602.215059-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There was a bug introduced during the rework which cause non-zero backlog
being stuck at ETS. Introduce a selftest that would have caught the issue
earlier.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently docs target is make dependency for TEST_GEN_FILES,
which makes tests to be rebuilt every time you run make.
Adding docs as all target dependency, so when running make
on top of built selftests it will show just:
$ make
make[1]: Nothing to be done for 'docs'.
After cleaning docs, only docs is rebuilt:
$ make docs-clean
CLEAN eBPF_helpers-manpage
CLEAN eBPF_syscall-manpage
$ make
GEN ...selftests/bpf/bpf-helpers.rst
GEN ...selftests/bpf/bpf-helpers.7
GEN ...selftests/bpf/bpf-syscall.rst
GEN ...selftests/bpf/bpf-syscall.2
$ make
make[1]: Nothing to be done for 'docs'.
Fixes: a01d935b2e ("tools/bpf: Remove bpf-helpers from bpftool docs")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210420132428.15710-1-jolsa@kernel.org
This test serves as a performance tester and a bug reproducer for
kvm page table code (GPA->HPA mappings), so it gives guidance for
people trying to make some improvement for kvm.
The function guest_code() can cover the conditions where a single vcpu or
multiple vcpus access guest pages within the same memory region, in three
VM stages(before dirty logging, during dirty logging, after dirty logging).
Besides, the backing src memory type(ANONYMOUS/THP/HUGETLB) of the tested
memory region can be specified by users, which means normal page mappings
or block mappings can be chosen by users to be created in the test.
If ANONYMOUS memory is specified, kvm will create normal page mappings
for the tested memory region before dirty logging, and update attributes
of the page mappings from RO to RW during dirty logging. If THP/HUGETLB
memory is specified, kvm will create block mappings for the tested memory
region before dirty logging, and split the blcok mappings into normal page
mappings during dirty logging, and coalesce the page mappings back into
block mappings after dirty logging is stopped.
So in summary, as a performance tester, this test can present the
performance of kvm creating/updating normal page mappings, or the
performance of kvm creating/splitting/recovering block mappings,
through execution time.
When we need to coalesce the page mappings back to block mappings after
dirty logging is stopped, we have to firstly invalidate *all* the TLB
entries for the page mappings right before installation of the block entry,
because a TLB conflict abort error could occur if we can't invalidate the
TLB entries fully. We have hit this TLB conflict twice on aarch64 software
implementation and fixed it. As this test can imulate process from dirty
logging enabled to dirty logging stopped of a VM with block mappings,
so it can also reproduce this TLB conflict abort due to inadequate TLB
invalidation when coalescing tables.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-11-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With VM_MEM_SRC_ANONYMOUS_THP specified in vm_userspace_mem_region_add(),
we have to get the transparent hugepage size for HVA alignment. With the
new helpers, we can use get_backing_src_pagesz() to check whether THP is
configured and then get the exact configured hugepage size.
As different architectures may have different THP page sizes configured,
this can get the accurate THP page sizes on any platform.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-10-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With VM_MEM_SRC_ANONYMOUS_HUGETLB, we currently can only use system
default hugetlb pages to back the testing guest memory. In order to
add flexibility, now list all the known hugetlb backing src types with
different page sizes, so that we can specify use of hugetlb pages of the
exact granularity that we want. And as all the known hugetlb page sizes
are listed, it's appropriate for all architectures.
Besides, the helper get_backing_src_pagesz() is added to get the
granularity of different backing src types(anonumous, thp, hugetlb).
Suggested-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-9-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If HUGETLB is configured in the host kernel, then we can know the system
default hugetlb page size through *cat /proc/meminfo*. Otherwise, we will
not see the information of hugetlb pages in file /proc/meminfo if it's not
configured. So add a helper to determine whether HUGETLB is configured and
then get the default page size by reading /proc/meminfo.
This helper can be useful when a program wants to use the default hugetlb
pages of the system and doesn't know the default page size.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-8-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we want to have some tests about transparent hugepages, the system
configured THP hugepage size should better be known by the tests, which
can be used for kinds of alignment or guest memory accessing of vcpus...
So it makes sense to add a helper to get the transparent hugepage size.
With VM_MEM_SRC_ANONYMOUS_THP specified in vm_userspace_mem_region_add(),
we now stat /sys/kernel/mm/transparent_hugepage to check whether THP is
configured in the host kernel before madvise(). Based on this, we can also
read file /sys/kernel/mm/transparent_hugepage/hpage_pmd_size to get THP
hugepage size.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-7-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For generality and conciseness, make an API which can be used in all
kvm libs and selftests to get vm guest mode strings. And the index i
is checked in the API in case of possiable faults.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-6-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Print the errno besides error-string in TEST_ASSERT in the format of
"errno=%d - %s" will explicitly indicate that the string is an error
information. Besides, the errno is easier to be used for debugging
than the error-string.
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-5-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a libbpf test prog which feeds bpf_get_task_stack's return value
into seq_write after confirming it's positive. No attempt to bound the
value from above is made.
Load will fail if verifier does not refine retval range based on buf sz
input to bpf_get_task_stack.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210416204704.2816874-4-davemarchevsky@fb.com
Add a bpf_iter test which feeds bpf_get_task_stack's return value into
seq_write after confirming it's positive. No attempt to bound the value
from above is made.
Load will fail if verifier does not refine retval range based on
buf sz input to bpf_get_task_stack.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210416204704.2816874-3-davemarchevsky@fb.com
