Add a --branch-history option to perf report that changes all the
settings necessary for using the branches in callstacks.
This is just a short cut to make this nicer to use, it does not enable
any functionality by itself.
v2: Change sort order. Rename option to --branch-history to
be less confusing.
v3: Updates
v4: Fix conflict with newer perf base
v5: Port to latest tip
v6: Add more comments. Remove CCKEY_ADDRESS setting. Remove
unnecessary branch_mode setting. Use a boolean.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1415844328-4884-5-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently branch stacks can be only shown as edge histograms for
individual branches. I never found this display particularly useful.
This implements an alternative mode that creates histograms over
complete branch traces, instead of individual branches, similar to how
normal callgraphs are handled. This is done by putting it in front of
the normal callgraph and then using the normal callgraph histogram
infrastructure to unify them.
This way in complex functions we can understand the control flow that
lead to a particular sample, and may even see some control flow in the
caller for short functions.
Example (simplified, of course for such simple code this is usually not
needed), please run this after the whole patchkit is in, as at this
point in the patch order there is no --branch-history, that will be
added in a patch after this one:
tcall.c:
volatile a = 10000, b = 100000, c;
__attribute__((noinline)) f2()
{
c = a / b;
}
__attribute__((noinline)) f1()
{
f2();
f2();
}
main()
{
int i;
for (i = 0; i < 1000000; i++)
f1();
}
% perf record -b -g ./tsrc/tcall
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ]
% perf report --no-children --branch-history
...
54.91% tcall.c:6 [.] f2 tcall
|
|--65.53%-- f2 tcall.c:5
| |
| |--70.83%-- f1 tcall.c:11
| | f1 tcall.c:10
| | main tcall.c:18
| | main tcall.c:18
| | main tcall.c:17
| | main tcall.c:17
| | f1 tcall.c:13
| | f1 tcall.c:13
| | f2 tcall.c:7
| | f2 tcall.c:5
| | f1 tcall.c:12
| | f1 tcall.c:12
| | f2 tcall.c:7
| | f2 tcall.c:5
| | f1 tcall.c:11
| |
| --29.17%-- f1 tcall.c:12
| f1 tcall.c:12
| f2 tcall.c:7
| f2 tcall.c:5
| f1 tcall.c:11
| f1 tcall.c:10
| main tcall.c:18
| main tcall.c:18
| main tcall.c:17
| main tcall.c:17
| f1 tcall.c:13
| f1 tcall.c:13
| f2 tcall.c:7
| f2 tcall.c:5
| f1 tcall.c:12
The default output is unchanged.
This is only implemented in perf report, no change to record or anywhere
else.
This adds the basic code to report:
- add a new "branch" option to the -g option parser to enable this mode
- when the flag is set include the LBR into the callstack in machine.c.
The rest of the history code is unchanged and doesn't know the
difference between LBR entry and normal call entry.
- detect overlaps with the callchain
- remove small loop duplicates in the LBR
Current limitations:
- The LBR flags (mispredict etc.) are not shown in the history
and LBR entries have no special marker.
- It would be nice if annotate marked the LBR entries somehow
(e.g. with arrows)
v2: Various fixes.
v3: Merge further patches into this one. Fix white space.
v4: Improve manpage. Address review feedback.
v5: Rename functions. Better error message without -g. Fix crash without
-b.
v6: Rebase
v7: Rebase. Use NO_ENTRY in memset.
v8: Port to latest tip. Move add_callchain_ip to separate
patch. Skip initial entries in callchain. Minor cleanups.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some Linux symbols (for example __vt_event_wait) are interpreted by the
demangler as C++ mangled names, which of course they aren't.
Disable kernel symbol demangling by default to avoid this, and allow
enabling it with a new option --demangle-kernel for those who wish it.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1410581705-26968-1-git-send-email-avi@cloudius-systems.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add -w/--column-widths option like perf report does so that users are
able to see symbols even with some very long C++ library/functions.
It can be a list separated by comma for each column.
$ perf top -w 0,20,30
The value of 0 means there's no limit.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In perf's 'mem-mode', one can get access to a whole bunch of details specific to a
particular sample instruction. A bunch of those details relate to the data
address.
One interesting thing you can do with data addresses is to convert them into a unique
cacheline they belong too. Organizing these data cachelines into similar groups and sorting
them can reveal cache contention.
This patch creates an alogorithm based on various sample details that can help group
entries together into data cachelines and allows 'perf report' to sort on it.
The algorithm relies on having proper mmap2 support in the kernel to help determine
if the memory map the data address belongs to is private to a pid or globally shared.
The alogortithm is as follows:
o group cpumodes together
o group entries with discovered maps together
o sort on major, minor, inode and inode generation numbers
o if userspace anon, then sort on pid
o sort on cachelines based on data addresses
The 'dcacheline' sort option in 'perf report' only works in 'mem-mode'.
Sample output:
#
# Samples: 206 of event 'cpu/mem-loads/pp'
# Total weight : 2534
# Sort order : dcacheline,pid
#
# Overhead Samples Data Cacheline Command: Pid
# ........ ............ ...................................................................... ..................
#
13.22% 1 [k] 0xffff88042f08ebc0 swapper: 0
9.27% 1 [k] 0xffff88082e8cea80 swapper: 0
3.59% 2 [k] 0xffffffff819ba180 swapper: 0
0.32% 1 [k] arch_trigger_all_cpu_backtrace_handler_na.23901+0xffffffffffffffe0 swapper: 0
0.32% 1 [k] timekeeper_seq+0xfffffffffffffff8 swapper: 0
Note: Added a '+1' to symlen size in hists__calc_col_len to prevent the next column
from prematurely tabbing over and mis-aligning. Not sure what the problem is.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/1401208087-181977-8-git-send-email-dzickus@redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The --children option is for showing accumulated overhead (period)
value as well as self overhead.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arun Sharma <asharma@fb.com>
Tested-by: Rodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-16-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The -F/--fields option is to allow user setup output field in any
order. It can receive any sort keys and following (hpp) fields:
overhead, overhead_sys, overhead_us, sample and period
If guest profiling is enabled, overhead_guest_{sys,us} will be
available too.
The output fields also affect sort order unless you give -s/--sort
option. And any keys specified on -s option, will also be added to
the output field list automatically.
$ perf report -F sym,sample,overhead
...
# Symbol Samples Overhead
# .......................... ............ ........
#
[.] __cxa_atexit 2 2.50%
[.] __libc_csu_init 4 5.00%
[.] __new_exitfn 3 3.75%
[.] _dl_check_map_versions 1 1.25%
[.] _dl_name_match_p 4 5.00%
[.] _dl_setup_hash 1 1.25%
[.] _dl_sysdep_start 1 1.25%
[.] _init 5 6.25%
[.] _setjmp 6 7.50%
[.] a 8 10.00%
[.] b 8 10.00%
[.] brk 1 1.25%
[.] c 8 10.00%
Note that, the example output above is captured after applying next
patch which fixes sort/comparing behavior.
Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-12-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The --percentage option is for controlling overhead percentage
displayed. It can only receive either of "relative" or "absolute".
"relative" means it's relative to filtered entries only so that the
sum of shown entries will be always 100%. "absolute" means it retains
the original value before and after the filter is applied.
$ perf report -s comm
# Overhead Command
# ........ ............
#
74.19% cc1
7.61% gcc
6.11% as
4.35% sh
4.14% make
1.13% fixdep
...
$ perf report -s comm -c cc1,gcc --percentage absolute
# Overhead Command
# ........ ............
#
74.19% cc1
7.61% gcc
$ perf report -s comm -c cc1,gcc --percentage relative
# Overhead Command
# ........ ............
#
90.69% cc1
9.31% gcc
Note that it has zero effect if no filter was applied.
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-3-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Currently the perf.data header is always displayed for stdio output,
which is no always useful.
Disabling header information by default and adding following options to
control header output:
--header - display header information (old default)
--header-only - display header information only w/o further
processing, forces stdio output
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386583370-1699-2-git-send-email-jolsa@redhat.com
[ Added single line explaining talking about the new --header* options,
to address David Ahern comment; better man page entry for the new options,
from Namhyung Kim ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When callgraph data was included in the perf data file, it may take a
long time to scan all those data and merge them together especially if
the stored callchains are long and the perf data file itself is large,
like a Gbyte or so.
The callchain stack is currently limited to PERF_MAX_STACK_DEPTH (127).
This is a large value. Usually the callgraph data that developers are
most interested in are the first few levels, the rests are usually not
looked at.
This patch adds a new --max-stack option to perf-report to limit the
depth of callchain stack data to look at to reduce the time it takes for
perf-report to finish its processing. It trades the presence of trailing
stack information with faster speed.
The following table shows the elapsed time of doing perf-report on a
perf.data file of size 985,531,828 bytes.
--max_stack Elapsed Time Output data size
----------- ------------ ----------------
not set 88.0s 124,422,651
64 87.5s 116,303,213
32 87.2s 112,023,804
16 86.6s 94,326,380
8 59.9s 33,697,248
4 40.7s 10,116,637
-g none 27.1s 2,555,810
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1382107129-2010-4-git-send-email-Waiman.Long@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for recording and displaying the transaction flags.
They are essentially a new sort key. Also display them
in a nice way to the user.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1379688044-14173-6-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Extend the perf branch sorting code to support sorting by in_tx
or abort_tx qualifiers. Also print out those qualifiers.
This also fixes up some of the existing sort key documentation.
We do not support no_tx here, because it's simply not showing
the in_tx flag.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1379688044-14173-4-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With programs with very large functions it can be useful to distinguish
the callgraph nodes on more than just function names. So for example if
you have multiple calls to the same function, it ends up being separate
nodes in the chain.
This patch adds a new key field to the callgraph options, that allows
comparing nodes on functions (as today, default) and addresses.
Longer term it would be nice to also handle src lines, but that would
need more changes and address is a reasonable proxy for it today.
I right now reference the global params, as there was no simple way to
register a params pointer.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-0uskktybf0e7wrnoi5e9b9it@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For example, in an application with an expensive function implemented
with deeply nested recursive calls, the default call-graph presentation
is dominated by the different callchains within that function. By
ignoring these callees, we can collect the callchains leading into the
function and compactly identify what to blame for expensive calls.
For example, in this report the callers of garbage_collect() are
scattered across the tree:
$ perf report -d ruby 2>- | grep -m10 ^[^#]*[a-z]
22.03% ruby [.] gc_mark
--- gc_mark
|--59.40%-- mark_keyvalue
| st_foreach
| gc_mark_children
| |--99.75%-- rb_gc_mark
| | rb_vm_mark
| | gc_mark_children
| | gc_marks
| | |--99.00%-- garbage_collect
If we ignore the callees of garbage_collect(), its callers are coalesced:
$ perf report --ignore-callees garbage_collect -d ruby 2>- | grep -m10 ^[^#]*[a-z]
72.92% ruby [.] garbage_collect
--- garbage_collect
vm_xmalloc
|--47.08%-- ruby_xmalloc
| st_insert2
| rb_hash_aset
| |--98.45%-- features_index_add
| | rb_provide_feature
| | rb_require_safe
| | vm_call_method
Signed-off-by: Greg Price <price@mit.edu>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20130623031720.GW22203@biohazard-cafe.mit.edu
Link: http://lkml.kernel.org/r/20130708115746.GO22203@biohazard-cafe.mit.edu
Cc: Fengguang Wu <fengguang.wu@intel.com>
[ remove spaces at beginning of line, reported by Fengguang Wu ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --percent-limit option is for not showing small overhead entries in
the output. Maybe we want to set a certain default value like 0.1.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1368497347-9628-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record has a new option -W that enables weightened sampling.
Add sorting support in top/report for the average weight per sample and the
total weight sum. This allows to both compare relative cost per event
and the total cost over the measurement period.
Add the necessary glue to perf report, record and the library.
v2: Merge with new hist refactoring.
v3: Fix manpage. Remove value check.
Rename global_weight to weight and weight to local_weight.
v4: Readd sort keys to manpage
v5: Move weight to end
v6: Move weight to template
v7: Rename weight key.
Original patch from Andi modified by Stephane Eranian <eranian@google.com>
to include ONLY the weight supporting code and apply to pristine 3.8.0-rc4.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-6-git-send-email-eranian@google.com
[ committer note: changed to cope with fc5871ed and the hists_link perf test entry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's sometimes useful to see undemangled raw symbol name for example
other tools using the perf output to do manipulation of binaries.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: William Cohen <wcohen@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=55571
Link: http://lkml.kernel.org/r/1364203098-17741-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add description of sort keys to the perf-report document and also add
missing cpu and srcline keys to the command line help string.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When analyzing perf data from hosts of other architecture than one of
the local host it's useful to call objdump that is part of a toolchain
for that architecture. Instead of calling regular objdump, call one that
user specified in command line.
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1346754750.16299.3.camel@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a simple GTK2-based browser to 'perf report' that's
based on the TTY-based browser in builtin-report.c.
To launch "perf report" using the new GTK interface just type:
$ perf report --gtk
The interface is somewhat limited in features at the moment:
- No callgraph support
- No KVM guest profiling support
- No color coding for percentages
- No sorting from the UI
- ..and many, many more!
That said, I think this patch a reasonable start to build future features on.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1202231952410.6689@tux.localdomain
[ committer note: Added #pragma to make gtk no strict prototype problem go
away as suggested by Colin Walters modulo avoiding push/pop ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds support for taken branch sampling, i.e, the
PERF_SAMPLE_BRANCH_STACK feature to perf report. In other
words, to display histograms based on taken branches rather
than executed instructions addresses.
The new option is called -b and it takes no argument. To
generate meaningful output, the perf.data must have been
obtained using perf record -b xxx ... where xxx is a branch
filter option.
The output shows symbols, modules, sorted by 'who branches
where' the most often. The percentages reported in the first
column refer to the total number of branches captured and
not the usual number of samples.
Here is a quick example.
Here branchy is simple test program which looks as follows:
void f2(void)
{}
void f3(void)
{}
void f1(unsigned long n)
{
if (n & 1UL)
f2();
else
f3();
}
int main(void)
{
unsigned long i;
for (i=0; i < N; i++)
f1(i);
return 0;
}
Here is the output captured on Nehalem, if we are
only interested in user level function calls.
$ perf record -b any_call,u -e cycles:u branchy
$ perf report -b --sort=symbol
52.34% [.] main [.] f1
24.04% [.] f1 [.] f3
23.60% [.] f1 [.] f2
0.01% [k] _IO_new_file_xsputn [k] _IO_file_overflow
0.01% [k] _IO_vfprintf_internal [k] _IO_new_file_xsputn
0.01% [k] _IO_vfprintf_internal [k] strchrnul
0.01% [k] __printf [k] _IO_vfprintf_internal
0.01% [k] main [k] __printf
About half (52%) of the call branches captured are from main()
-> f1(). The second half (24%+23%) is split in two equal shares
between f1() -> f2(), f1() ->f3(). The output is as expected
given the code.
It should be noted, that using -b in perf record does not
eliminate information in the perf.data file. Consequently, a
typical profile can also be obtained by perf report by simply
not using its -b option.
It is possible to sort on branch related columns:
- dso_from, symbol_from
- dso_to, symbol_to
- mispredict
Signed-off-by: Roberto Agostino Vitillo <ravitillo@lbl.gov>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: acme@redhat.com
Cc: robert.richter@amd.com
Cc: ming.m.lin@intel.com
Cc: andi@firstfloor.org
Cc: asharma@fb.com
Cc: vweaver1@eecs.utk.edu
Cc: khandual@linux.vnet.ibm.com
Cc: dsahern@gmail.com
Link: http://lkml.kernel.org/r/1328826068-11713-14-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The default input file for perf report is not handled the same way as
perf record does it for its output file. This leads to unexpected
behavior of perf report, etc. E.g.:
# perf record -a -e cpu-cycles sleep 2 | perf report | cat
failed to open perf.data: No such file or directory (try 'perf record' first)
While perf record writes to a fifo, perf report expects perf.data to be
read. This patch changes this to accept fifos as input file.
Applies to the following commands:
perf annotate
perf buildid-list
perf evlist
perf kmem
perf lock
perf report
perf sched
perf script
perf timechart
Also fixes char const* -> const char* type declaration for filename
strings.
v2:
* Prevent potential null pointer access to input_name in
builtin-report.c. Needed due to removal of patch "perf report: Setup
browser if stdout is a pipe"
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-5-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The '--call-graph' command line option can receive undocumented optional
print_limit argument. Besides, use strtoul() to parse the option since
its type is u32.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323703017-6060-2-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the meaning of -C varies by perf command: for perf-top,
perf-stat, perf-record it means cpu list. For perf-report it means comm
list. Then perf-annotate, perf-report and perf-script use -c for cpu
list.
Fix annotate, report and script to use -C for cpu list to be consistent
with top, stat and record. This means report needs to use -c for comm
list which does introduce a backward compatibility change.
v1 -> v2
- update perf-script.txt too
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1321209008-7004-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And add the annotation output knobs to all the tools that have
integrated annotation (top, report).
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gnlob67mke6sji2kf4nstp7m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The goal of this patch is to include more information about the host
environment into the perf.data so it is more self-descriptive. Overtime,
profiles are captured on various machines and it becomes hard to track
what was recorded, on what machine and when.
This patch provides a way to solve this by extending the perf.data file
with basic information about the host machine. To add those extensions,
we leverage the feature bits capabilities of the perf.data format. The
change is backward compatible with existing perf.data files.
We define the following useful new extensions:
- HEADER_HOSTNAME: the hostname
- HEADER_OSRELEASE: the kernel release number
- HEADER_ARCH: the hw architecture
- HEADER_CPUDESC: generic CPU description
- HEADER_NRCPUS: number of online/avail cpus
- HEADER_CMDLINE: perf command line
- HEADER_VERSION: perf version
- HEADER_TOPOLOGY: cpu topology
- HEADER_EVENT_DESC: full event description (attrs)
- HEADER_CPUID: easy-to-parse low level CPU identication
The small granularity for the entries is to make it easier to extend
without breaking backward compatiblity. Many entries are provided as
ASCII strings.
Perf report/script have been modified to print the basic information as
easy-to-parse ASCII strings. Extended information about CPU and NUMA
topology may be requested with the -I option.
Thanks to David Ahern for reviewing and testing the many versions of
this patch.
$ perf report --stdio
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# ========
#
...
$ perf report --stdio -I
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# sibling cores : 0-3
# sibling threads : 0
# sibling threads : 1
# sibling threads : 2
# sibling threads : 3
# node0 meminfo : total = 8320608 kB, free = 7571024 kB
# node0 cpu list : 0-3
# ========
#
...
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20110930134040.GA5575@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer notes: Use --show-info in the tools as was in the docs, rename
perf_header_fprintf_info to perf_file_section__fprintf_info, fixup
conflict with f69b64f7 "perf: Support setting the disassembler style" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like --show-nr-samples, to help in diagnosing problems in the
tools.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1lr7ejdjfvy2uwy2wkmatcpq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add -M option to report/annotate to pass directly to objdump. This
allows to use -M intel for intel style disassembler syntax, which is
useful for people who are very used to the Intel syntax.
Link: http://lkml.kernel.org/r/1316122302-24306-2-git-send-email-andi@firstfloor.org
[committer note: Add missing Documentation bits, fixup conflicts with 3e6a2a7]
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option to perf report/annotate/script to specify which
CPUs to operate on. This enables us to take a single system wide
profile and analyse each CPU (or group of CPUs) in isolation.
This was useful when profiling a multiprocess workload where the
bottleneck was on one CPU but this was hidden in the overall
profile. Per process and per thread breakdowns didn't help
because multiple processes were running on each CPU and no
single process consumed an entire CPU.
The patch converts the list of CPUs returned by cpu_map__new
into a bitmap for fast lookup. I wanted to use -C to be
consistent with perf top/record/stat, but unfortunately perf
report already uses -C <comms>.
v2: Incorporate suggestions from David Ahern:
- Added -c to perf script
- Check that SAMPLE_CPU is set when -c is used
- Update documentation
v3: Create perf_session__cpu_bitmap()
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/20110704215750.11647eb9@kryten
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add "caller/callee" option to support inverted butterfly report,
in the inverted report (with caller option), the call graph start
from the callee's ancestor. Users can use such view to catch system's
performance bottleneck from a sysprof like view. Using this option
with specified sort order like pid gives us high level view of call
graph statistics.
Also add "-G" alias for inverted call graph.
Signed-off-by: Sam Liao <phyomh@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The symfs argument allows analysis of perf.data file using a locally accessible
filesystem tree with debug symbols - e.g., tree created during image builds,
sshfs mount, loop mounted KVM disk images, USB keys, initrds, etc. Anything
with an OS tree can be analyzed from anywhere without the need to populate a
local data store with build-ids.
Commiter notes:
o Fixed up symfs="/" variants handling.
o prefixed DSO__ORIG_GUEST_KMODULE case with symfs too, avoiding use of files
outside the symfs directory.
LKML-Reference: <1291926427-28846-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is useful for analyzing a perf data file on a different system than
the one data was collected on and still include symbols from loaded
kernel modules in the output.
Commiter note: Updated the man page accordingly.
LKML-Reference: <1291775986-16475-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Relying just on ~/.perfconfig or rebuilding the tool disabling support
for the TUI is too cumbersome, so allow specifying which UI to use and
make the command line switch override whatever is in ~/.perfconfig.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That means that almost everything you can do with 'perf report'
can be done with 'perf diff', for instance:
$ perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2699
samples) ] $ perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2687
samples) ] perf diff | head -8
9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal
2.91% -1.00% find [kernel] [k] __kmalloc
2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent
1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock
2.44% find [kernel] [k] half_md4_transform
$
So if you want to zoom into libc:
$ perf diff --dsos libc-2.10.1.so | head -8
37.34% find [.] _IO_vfprintf_internal
10.34% find [.] __GI_memmove
8.25% +2.00% find [.] _int_malloc
5.07% -1.00% find [.] __GI_mempcpy
7.62% +2.00% find [.] _int_free
$
And if there were multiple commands using libc, it is also
possible to aggregate them all by using --sort symbol:
$ perf diff --dsos libc-2.10.1.so --sort symbol | head -8
37.34% [.] _IO_vfprintf_internal
10.34% [.] __GI_memmove
8.25% +2.00% [.] _int_malloc
5.07% -1.00% [.] __GI_mempcpy
7.62% +2.00% [.] _int_free
$
The displacement column now is off by default, to use it:
perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8
37.34% [.] _IO_vfprintf_internal
10.34% [.] __GI_memmove
8.25% +2.00% [.] _int_malloc
5.07% -1.00% +2 [.] __GI_mempcpy
7.62% +2.00% -1 [.] _int_free
$
Using -t/--field-separator can be used for scripting:
$ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8
37.34, , ,[.] _IO_vfprintf_internal
10.34, , ,[.] __GI_memmove
8.25,+2.00%, ,[.] _int_malloc
5.07,-1.00%, +2,[.] __GI_mempcpy
7.62,+2.00%, -1,[.] _int_free
6.99,+1.00%, -1,[.] _IO_new_file_xsputn
1.89,-2.00%, +4,[.] __readdir64
$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Improve and fix the handling of per-thread counter stats
recorded via perf record -s. Previously we only displayed
it in debug printouts (-D) and even that output was hard
to disambiguate.
I moved everything to utils/values.[ch] so that we may reuse
it in perf stat.
We get something like this now:
# PID TID cache-misses cache-references
4658 4659 495581 3238779
4658 4662 498246 3236823
4658 4663 499531 3243162
Then it'll be easy to add --pretty=raw to display a single line per thread/event.
By the way, -S was also used for --symbol... So I used -T/--thread here.
perf report: Add -T/--threads to display per-thread counter values
We get something like this now:
# PID TID cache-misses cache-references
4658 4659 495581 3238779
4658 4662 498246 3236823
4658 4663 499531 3243162
Per-thread arrays of counter values are managed in utils/values.[ch]
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Auto-adjust column width of perf report output to the
longest occuring string length.
Example:
[acme@doppio pahole]$ perf report --sort comm,dso,symbol | head -13
12.79% pahole /usr/lib64/libdw-0.141.so [.] __libdw_find_attr
8.90% pahole /lib64/libc-2.10.1.so [.] _int_malloc
8.68% pahole /usr/lib64/libdw-0.141.so [.] __libdw_form_val_len
8.15% pahole /lib64/libc-2.10.1.so [.] __GI_strcmp
6.80% pahole /lib64/libc-2.10.1.so [.] __tsearch
5.54% pahole ./build/libdwarves.so.1.0.0 [.] tag__recode_dwarf_type
[acme@doppio pahole]$
[acme@doppio pahole]$ perf report --sort comm,dso,symbol -d /lib64/libc-2.10.1.so | head -10
21.92% pahole /lib64/libc-2.10.1.so [.] _int_malloc
20.08% pahole /lib64/libc-2.10.1.so [.] __GI_strcmp
16.75% pahole /lib64/libc-2.10.1.so [.] __tsearch
[acme@doppio pahole]$
Also add these extra options to control the new behaviour:
-w, --field-width
Force each column width to the provided list, for large terminal
readability.
-t, --field-separator:
Use a special separator character and don't pad with spaces, replacing
all occurances of this separator in symbol names (and other output) with
a '.' character, that thus it's the only non valid separator.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090711014728.GH3452@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we can filter by comm. Symbols in other comms won't be
accounted for.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-3-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we can filter by dso. Symbols in other dsos won't be
accounted for.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-2-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
