-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYdxh3xQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5bXsAP9xioC+sDpA+KgicrTxLQp2HBHVdkdj
hnsSw7KE6d1YFwD/Zu1BPi/iX1HHcEvTm34x9jKWeU54VCyqsXJG+zArDA0=
=/eFf
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
"The few changes are all kexec related:
- The MOK keys are loaded onto the .platform keyring in order to
verify the kexec kernel image signature.
However, the MOK keys should only be trusted when secure boot is
enabled. Before loading the MOK keys onto the .platform keyring,
make sure the system is booted in secure boot mode.
- When carrying the IMA measurement list across kexec, limit dumping
the measurement list to when dynamic debug or CONFIG_DEBUG is
enabled.
- kselftest: add kexec_file_load selftest support for PowerNV and
other cleanup"
* tag 'integrity-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
selftests/kexec: Enable secureboot tests for PowerPC
ima: silence measurement list hexdump during kexec
selftests/kexec: update searching for the Kconfig
selftest/kexec: fix "ignored null byte in input" warning
integrity: Do not load MOK and MOKx when secure boot be disabled
ima: Fix undefined arch_ima_get_secureboot() and co
- new testing module: gpio-sim that is scheduled to replace gpio-mockup
- initial changes aiming at converting all GPIO drivers to using the fwnode
interface and limiting any references to OF symbols to gpiolib-of.c
- add support for Tegra234 and Tegra241 to gpio-tegra186
- add support for new models (SSD201 and SSD202D) to gpio-msc313
- add basic support for interrupts to gpio-aggregator
- add support for AMDIF031 HID device to gpio-amdpt
- drop support for unused platforms in gpio-xlp
- cleanup leftovers from the removal of the legacy Samsung Exynos GPIO driver
- use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make PREEMPT_RT
happy
- generalize the common 'ngpios' device property by reading it in the core
gpiolib code so that we can remove duplicate reads from drivers
- allow line names from device properties to override names set by drivers
- code shrink in gpiod_add_lookup_table()
- add new model to the DT bindings for gpio-vf610
- convert DT bindings for tegra devices to YAML
- improvements to interrupt handling in gpio-rcar and gpio-rockchip
- updates to intel drivers from Andy (details in the merge commit)
- some minor tweaks, improvements and coding-style fixes all around the
subsystem
-----BEGIN PGP SIGNATURE-----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=OUhL
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The gpio-sim module is back, this time without any changes to
configfs. This results in a less elegant user-space interface but I
never got any follow-up on the committable items and didn't want to
delay this module for several more months.
Other than that we have support for several new models and some
support going away. We started working on converting GPIO drivers to
using fwnode exclusively in order to limit references to OF symbols to
gpiolib-of.c exclusively. We also have regular tweaks and improvements
all over the place.
Summary:
- new testing module: gpio-sim that is scheduled to replace
gpio-mockup
- initial changes aiming at converting all GPIO drivers to using the
fwnode interface and limiting any references to OF symbols to
gpiolib-of.c
- add support for Tegra234 and Tegra241 to gpio-tegra186
- add support for new models (SSD201 and SSD202D) to gpio-msc313
- add basic support for interrupts to gpio-aggregator
- add support for AMDIF031 HID device to gpio-amdpt
- drop support for unused platforms in gpio-xlp
- cleanup leftovers from the removal of the legacy Samsung Exynos
GPIO driver
- use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make
PREEMPT_RT happy
- generalize the common 'ngpios' device property by reading it in the
core gpiolib code so that we can remove duplicate reads from
drivers
- allow line names from device properties to override names set by
drivers
- code shrink in gpiod_add_lookup_table()
- add new model to the DT bindings for gpio-vf610
- convert DT bindings for tegra devices to YAML
- improvements to interrupt handling in gpio-rcar and gpio-rockchip
- updates to intel drivers from Andy (details in the merge commit)
- some minor tweaks, improvements and coding-style fixes all around
the subsystem"
* tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: rcar: Propagate errors from devm_request_irq()
gpio: rcar: Use platform_get_irq() to get the interrupt
gpio: ts5500: Use platform_get_irq() to get the interrupt
gpio: dwapb: Switch to use fwnode instead of of_node
gpiolib: acpi: make fwnode take precedence in struct gpio_chip
dt-bindings: gpio: samsung: drop unused bindings
gpio: max3191x: Use bitmap_free() to free bitmap
gpio: regmap: Switch to use fwnode instead of of_node
gpio: tegra186: Add support for Tegra241
dt-bindings: gpio: Add Tegra241 support
gpio: brcmstb: Use local variable to access OF node
gpio: Remove unused local OF node pointers
gpio: sim: add missing fwnode_handle_put() in gpio_sim_probe()
gpio: msc313: Add support for SSD201 and SSD202D
gpio: msc313: Code clean ups
dt-bindings: gpio: msc313: Add offsets for ssd20xd
dt-bindings: gpio: msc313: Add compatible for ssd20xd
gpio: sim: fix uninitialized ret variable
gpio: Propagate firmware node from a parent device
gpio: Setup parent device and get rid of unnecessary of_node assignment
...
Highlights:
- new drivers:
- asus-tf103c-dock
- intel_crystal_cove_charger
- lenovo-yogabook-wmi
- simatic-ipc platform-code + led driver + watchdog driver
- x86-android-tablets (kernel module to workaround DSDT bugs on these)
- amd-pmc:
- bug-fixes
- smar trace buffer support
- asus-wmi: support for custom fan curves
- int3472 (camera info ACPI object for Intel IPU3/SkyCam cameras):
- ACPI core + int3472 changes to delay enumeration of camera sensor I2C
clients until the PMIC for the sensor has been fully probed
- Add support for board data (DSDT info is incomplete) for setting up
the tps68470 PMIC used on some boards with these cameras
- Add board data for the Microsoft Surface Go (original, v2 and v3)
- thinkpad_acpi:
- various cleanups
- support for forced battery discharging (for battery calibration)
- support to inhibit battery charging
- this includes power_supply core changes to add new APIs for this
- think_lmi: enhanced BIOS password support
- various other small fixes and hardware-id additions
The following is an automated git shortlog grouped by driver:
ACPI:
- delay enumeration of devices with a _DEP pointing to an INT3472 device
Add Asus TF103C dock driver:
- Add Asus TF103C dock driver
Add intel_crystal_cove_charger driver:
- Add intel_crystal_cove_charger driver
Documentation:
- syfs-class-firmware-attributes: Lenovo Opcode support
Merge tag 'platform-drivers-x86-int3472-1' into review-hans:
- Merge tag 'platform-drivers-x86-int3472-1' into review-hans
amd-pmc:
- only use callbacks for suspend
- Add support for AMD Smart Trace Buffer
- Simplify error handling and store the pci_dev in amd_pmc_dev structure
- Fix s2idle failures on certain AMD laptops
- Make CONFIG_AMD_PMC depend on RTC_CLASS
apple-gmux:
- use resource_size() with res
asus-wmi:
- Reshuffle headers for better maintenance
- Split MODULE_AUTHOR() on per author basis
- Join string literals back
- remove unneeded semicolon
- Add support for custom fan curves
dell-wmi-descriptor:
- disable by default
hp_accel:
- Use SIMPLE_DEV_PM_OPS() for PM ops
- Fix an error handling path in 'lis3lv02d_probe()'
i2c:
- acpi: Add i2c_acpi_new_device_by_fwnode() function
- acpi: Use acpi_dev_ready_for_enumeration() helper
int3472:
- Add board data for Surface Go 3
- Deal with probe ordering issues
- Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
- Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
- Add get_sensor_adev_and_name() helper
- Split into 2 drivers
intel-uncore-frequency:
- use default_groups in kobj_type
intel_pmc_core:
- fix memleak on registration failure
leds:
- simatic-ipc-leds: add new driver for Siemens Industial PCs
lenovo-yogabook-wmi:
- Add support for hall sensor on the back
- Add driver for Lenovo Yoga Book
lg-laptop:
- Recognize more models
platform:
- surface: Propagate ACPI Dependency
platform/mellanox:
- mlxbf-pmc: Fix an IS_ERR() vs NULL bug in mlxbf_pmc_map_counters
- mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
platform/surface:
- aggregator_registry: Rename device registration function
- aggregator_registry: Use generic client removal function
- aggregator: Make client device removal more generic
platform/x86/intel:
- Remove X86_PLATFORM_DRIVERS_INTEL
- hid: add quirk to support Surface Go 3
platform_data:
- Add linux/platform_data/tps68470.h file
pmc_atom:
- improve critclk_systems matching for Siemens PCs
power:
- supply: Provide stubs for charge_behaviour helpers
- supply: fix charge_behaviour attribute initialization
- supply: add helpers for charge_behaviour sysfs
- supply: add charge_behaviour attributes
samsung-laptop:
- Fix typo in a comment
simatic-ipc:
- add main driver for Siemens devices
system76_acpi:
- Guard System76 EC specific functionality
think-lmi:
- Prevent underflow in index_store()
- Simplify tlmi_analyze() error handling a bit
- Move kobject_init() call into tlmi_create_auth()
- Opcode support
- Abort probe on analyze failure
thinkpad_acpi:
- support inhibit-charge
- support force-discharge
- Add lid_logo_dot to the list of safe LEDs
- Add LED_RETAIN_AT_SHUTDOWN to led_class_devs
- Remove unused sensors_pdev_attrs_registered flag
- Fix the hwmon sysfs-attr showing up in the wrong place
- tpacpi_attr_group contains driver attributes not device attrs
- Register tpacpi_pdriver after subdriver init
- Restore missing hotkey_tablet_mode and hotkey_radio_sw sysfs-attr
- Fix thermal_temp_input_attr sorting
- Remove "goto err_exit" from hotkey_init()
- Properly indent code in tpacpi_dytc_profile_init()
- Cleanup dytc_profile_available
- Simplify dytc_version handling
- Make *_init() functions return -ENODEV instead of 1
- Accept ibm_init_struct.init() returning -ENODEV
- Convert platform driver to use dev_groups
- fix documentation for adaptive keyboard
- Fix WWAN device disabled issue after S3 deep
- Add support for dual fan control
tools/power/x86/intel-speed-select:
- v1.11 release
- Update max frequency
touchscreen_dmi:
- Remove the Glavey TM800A550L entry
- Enable pen support on the Chuwi Hi10 Plus and Pro
- Correct min/max values for Chuwi Hi10 Pro (CWI529) tablet
- Add TrekStor SurfTab duo W1 touchscreen info
watchdog:
- simatic-ipc-wdt: add new driver for Siemens Industrial PCs
wmi:
- Add no_notify_data flag to struct wmi_driver
- Fix driver->notify() vs ->probe() race
- Replace read_takes_no_args with a flags field
x86-android-tablets:
- Fix GPIO lookup leak on error-exit
- Add TM800A550L data
- Add Asus MeMO Pad 7 ME176C data
- Add Asus TF103C data
- Add support for preloading modules
- Add support for registering GPIO lookup tables
- Add support for instantiating serdevs
- Add support for instantiating platform-devs
- Add support for PMIC interrupts
- Don't return -EPROBE_DEFER from a non probe() function
- New driver for x86 Android tablets
x86/platform/uv:
- use default_groups in kobj_type
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmHcCbkUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9y3yAf/Xo8TWsnF7XoS3pNCqRcObIulHy6u
9AOD4gTb0p9LiAd8WN75UsQDew0Rib+UDTS3s6g9l71fMzpTFOD4IaBPrVAmIxpu
Qs9raFTH67CFid/V3DCwAjPQYxxp5LBGvYJ4oy3OmaYHieV9jdsvNLISlpi/V8wR
PmbmYtiK5TPZwRT+mknq89D+LynP2NYkvoqRitmB7MrAvxY3c0ssrex6dXMrdgqK
ehRtfz/ER8xQ03APIzHG+ec73LZsHCMDDG7teas4tiMlMaWGgRO2I8GAudjuPEoy
mBTSb3ABuEud8LTMgjB+trM2w9IAoFE0L6/OrKE5dK1tPdaLxvCuuSVheQ==
=tmPR
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
New drivers:
- asus-tf103c-dock
- intel_crystal_cove_charger
- lenovo-yogabook-wmi
- simatic-ipc platform-code + led driver + watchdog driver
- x86-android-tablets (kernel module to workaround DSDT bugs on
these)
amd-pmc:
- bug-fixes
- smar trace buffer support
asus-wmi:
- support for custom fan curves
int3472 (camera info ACPI object for Intel IPU3/SkyCam cameras):
- ACPI core + int3472 changes to delay enumeration of camera sensor
I2C clients until the PMIC for the sensor has been fully probed
- Add support for board data (DSDT info is incomplete) for setting up
the tps68470 PMIC used on some boards with these cameras
- Add board data for the Microsoft Surface Go (original, v2 and v3)
thinkpad_acpi:
- various cleanups
- support for forced battery discharging (for battery calibration)
- support to inhibit battery charging
- this includes power_supply core changes to add new APIs for this
think_lmi:
- enhanced BIOS password support
various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (78 commits)
power: supply: Provide stubs for charge_behaviour helpers
platform/x86: x86-android-tablets: Fix GPIO lookup leak on error-exit
platform/x86: int3472: Add board data for Surface Go 3
platform/x86: Add Asus TF103C dock driver
platform/x86: x86-android-tablets: Add TM800A550L data
platform/x86: x86-android-tablets: Add Asus MeMO Pad 7 ME176C data
platform/x86: x86-android-tablets: Add Asus TF103C data
platform/x86: x86-android-tablets: Add support for preloading modules
platform/x86: x86-android-tablets: Add support for registering GPIO lookup tables
platform/x86: x86-android-tablets: Add support for instantiating serdevs
platform/x86: x86-android-tablets: Add support for instantiating platform-devs
platform/x86: x86-android-tablets: Add support for PMIC interrupts
platform/x86: x86-android-tablets: Don't return -EPROBE_DEFER from a non probe() function
platform/x86: touchscreen_dmi: Remove the Glavey TM800A550L entry
platform/x86: touchscreen_dmi: Enable pen support on the Chuwi Hi10 Plus and Pro
platform/x86: touchscreen_dmi: Correct min/max values for Chuwi Hi10 Pro (CWI529) tablet
platform/x86: Add intel_crystal_cove_charger driver
power: supply: fix charge_behaviour attribute initialization
platform/x86: intel-uncore-frequency: use default_groups in kobj_type
x86/platform/uv: use default_groups in kobj_type
...
This series provides KCSAN fixes and also the ability to take memory
barriers into account for weakly-ordered systems. This last can increase
the probability of detecting certain types of data races.
-----BEGIN PGP SIGNATURE-----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=Q5fg
-----END PGP SIGNATURE-----
Merge tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull KCSAN updates from Paul McKenney:
"This provides KCSAN fixes and also the ability to take memory barriers
into account for weakly-ordered systems. This last can increase the
probability of detecting certain types of data races"
* tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
kcsan: Only test clear_bit_unlock_is_negative_byte if arch defines it
kcsan: Avoid nested contexts reading inconsistent reorder_access
kcsan: Turn barrier instrumentation into macros
kcsan: Make barrier tests compatible with lockdep
kcsan: Support WEAK_MEMORY with Clang where no objtool support exists
compiler_attributes.h: Add __disable_sanitizer_instrumentation
objtool, kcsan: Remove memory barrier instrumentation from noinstr
objtool, kcsan: Add memory barrier instrumentation to whitelist
sched, kcsan: Enable memory barrier instrumentation
mm, kcsan: Enable barrier instrumentation
x86/qspinlock, kcsan: Instrument barrier of pv_queued_spin_unlock()
x86/barriers, kcsan: Use generic instrumentation for non-smp barriers
asm-generic/bitops, kcsan: Add instrumentation for barriers
locking/atomics, kcsan: Add instrumentation for barriers
locking/barriers, kcsan: Support generic instrumentation
locking/barriers, kcsan: Add instrumentation for barriers
kcsan: selftest: Add test case to check memory barrier instrumentation
kcsan: Ignore GCC 11+ warnings about TSan runtime support
kcsan: test: Add test cases for memory barrier instrumentation
kcsan: test: Match reordered or normal accesses
...
Add a check to the xdp_link selftest that the kernel rejects replacing an
XDP program with a different program type on link update.
v2:
- Split this out into its own patch.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220107221115.326171-3-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert the selftest to use the preferred ASSERT_* macros instead of the
deprecated CHECK().
v2:
- Don't add if statements around checks if they weren't there before.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220107221115.326171-2-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This series contains documentation and litmus tests for locking, courtesy
of Boqun Feng.
-----BEGIN PGP SIGNATURE-----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=3YsU
-----END PGP SIGNATURE-----
Merge tag 'lkmm.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull memory model documentation updates from Paul McKenney:
"This series contains documentation and litmus tests for locking,
courtesy of Boqun Feng"
* tag 'lkmm.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/memory-model: litmus: Add two tests for unlock(A)+lock(B) ordering
tools/memory-model: doc: Describe the requirement of the litmus-tests directory
tools/memory-model: Provide extra ordering for unlock+lock pair on the same CPU
This pull request contains the following branches:
doc.2021.11.30c: Documentation updates, perhaps most notably Neil Brown's
writeup of the reference-counting analogy to RCU.
exp.2021.12.07a: Expedited grace-period cleanups.
fastnohz.2021.11.30c: Remove CONFIG_RCU_FAST_NO_HZ due to lack of valid
users. I have asked around, posted a blog entry, and sent this
series to LKML without result.
fixes.2021.11.30c: Miscellaneous fixes.
nocb.2021.12.09a: RCU callback offloading updates, perhaps most notably
Frederic Weisbecker's updates allowing CPUs booted in the
de-offloaded state to be offloaded at runtime.
nolibc.2021.11.30c: nolibc fixes from Willy Tarreau and Anmar Faizi, but
also including Mark Brown's addition of gettid().
tasks.2021.12.09a: RCU Tasks Trace fixes, including changes that increase
the scalability of call_rcu_tasks_trace() for the BPF folks
(Martin Lau and KP Singh).
torture.2021.12.07a: Various fixes including those from Wander Lairson
Costa and Li Zhijian.
torturescript.2021.11.30c: Fixes plus addition of tests for the increased
call_rcu_tasks_trace() scalability.
-----BEGIN PGP SIGNATURE-----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=K6AN
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates, perhaps most notably Neil Brown's writeup of
the reference-counting analogy to RCU.
- Expedited grace-period cleanups.
- Remove CONFIG_RCU_FAST_NO_HZ due to lack of valid users. I have asked
around, posted a blog entry, and sent this series to LKML without
result.
- Miscellaneous fixes.
- RCU callback offloading updates, perhaps most notably Frederic
Weisbecker's updates allowing CPUs booted in the de-offloaded state
to be offloaded at runtime.
- nolibc fixes from Willy Tarreau and Anmar Faizi, but also including
Mark Brown's addition of gettid().
- RCU Tasks Trace fixes, including changes that increase the
scalability of call_rcu_tasks_trace() for the BPF folks (Martin Lau
and KP Singh).
- Various fixes including those from Wander Lairson Costa and Li
Zhijian.
- Fixes plus addition of tests for the increased call_rcu_tasks_trace()
scalability.
* tag 'rcu.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (87 commits)
rcu/nocb: Merge rcu_spawn_cpu_nocb_kthread() and rcu_spawn_one_nocb_kthread()
rcu/nocb: Allow empty "rcu_nocbs" kernel parameter
rcu/nocb: Create kthreads on all CPUs if "rcu_nocbs=" or "nohz_full=" are passed
rcu/nocb: Optimize kthreads and rdp initialization
rcu/nocb: Prepare nocb_cb_wait() to start with a non-offloaded rdp
rcu/nocb: Remove rcu_node structure from nocb list when de-offloaded
rcu-tasks: Use fewer callbacks queues if callback flood ends
rcu-tasks: Use separate ->percpu_dequeue_lim for callback dequeueing
rcu-tasks: Use more callback queues if contention encountered
rcu-tasks: Avoid raw-spinlocked wakeups from call_rcu_tasks_generic()
rcu-tasks: Count trylocks to estimate call_rcu_tasks() contention
rcu-tasks: Add rcupdate.rcu_task_enqueue_lim to set initial queueing
rcu-tasks: Make rcu_barrier_tasks*() handle multiple callback queues
rcu-tasks: Use workqueues for multiple rcu_tasks_invoke_cbs() invocations
rcu-tasks: Abstract invocations of callbacks
rcu-tasks: Abstract checking of callback lists
rcu-tasks: Add a ->percpu_enqueue_lim to the rcu_tasks structure
rcu-tasks: Inspect stalled task's trc state in locked state
rcu-tasks: Use spin_lock_rcu_node() and friends
rcutorture: Combine n_max_cbs from all kthreads in a callback flood
...
- Add new TSU driver and DT bindings for the Renesas RZ/G2L platform
(Biju Das).
- Fix missing check when calling reset_control_deassert() in the
rz2gl thermal driver (Biju Das).
- In preparation for FORTIFY_SOURCE performing compile-time and
run-time field bounds checking for memcpy(), avoid intentionally
writing across neighboring fields in the int340x thermal control
driver (Kees Cook).
- Fix RFIM mailbox write commands handling in the int340x thermal
control driver (Sumeet Pawnikar).
- Fix PM issue occurring in the iMX thermal control driver during
suspend/resume by implementing PM runtime support in it (Oleksij
Rempel).
- Add 'const' annotation to thermal_cooling_ops in the Intel
powerclamp driver (Rikard Falkeborn).
- Fix missing ADC bit set in the iMX8MP thermal driver to enable the
sensor (Paul Gerber).
- Drop unused local variable definition from tmon (ran jianping).
-----BEGIN PGP SIGNATURE-----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=Crok
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add a new driver for Renesas RZ/G2L TSU, update a few existing
thermal control drivers and clean up the tmon utility.
Specifics:
- Add new TSU driver and DT bindings for the Renesas RZ/G2L platform
(Biju Das).
- Fix missing check when calling reset_control_deassert() in the
rz2gl thermal driver (Biju Das).
- In preparation for FORTIFY_SOURCE performing compile-time and
run-time field bounds checking for memcpy(), avoid intentionally
writing across neighboring fields in the int340x thermal control
driver (Kees Cook).
- Fix RFIM mailbox write commands handling in the int340x thermal
control driver (Sumeet Pawnikar).
- Fix PM issue occurring in the iMX thermal control driver during
suspend/resume by implementing PM runtime support in it (Oleksij
Rempel).
- Add 'const' annotation to thermal_cooling_ops in the Intel
powerclamp driver (Rikard Falkeborn).
- Fix missing ADC bit set in the iMX8MP thermal driver to enable the
sensor (Paul Gerber).
- Drop unused local variable definition from tmon (ran jianping)"
* tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/int340x: Fix RFIM mailbox write commands
thermal/drivers/rz2gl: Add error check for reset_control_deassert()
thermal/drivers/imx8mm: Enable ADC when enabling monitor
thermal/drivers: Add TSU driver for RZ/G2L
dt-bindings: thermal: Document Renesas RZ/G2L TSU
thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops
thermal/drivers/imx: Implement runtime PM support
thermal: tools: tmon: remove unneeded local variable
thermal: int340x: Use struct_group() for memcpy() region
Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible,
or at least perform the freeing outside of the socket lock section
to decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice
and net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported
in the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or
MSM8974 (qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch
driver with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of:
lan78xx, ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer granularity,
stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KLm3
-----END PGP SIGNATURE-----
Merge tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible, or at
least perform the freeing outside of the socket lock section to
decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice and
net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported in
the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
(qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of: lan78xx,
ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer
granularity, stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support"
* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
tcp: tcp_send_challenge_ack delete useless param `skb`
net/qla3xxx: Remove useless DMA-32 fallback configuration
rocker: Remove useless DMA-32 fallback configuration
hinic: Remove useless DMA-32 fallback configuration
lan743x: Remove useless DMA-32 fallback configuration
net: enetc: Remove useless DMA-32 fallback configuration
cxgb4vf: Remove useless DMA-32 fallback configuration
cxgb4: Remove useless DMA-32 fallback configuration
cxgb3: Remove useless DMA-32 fallback configuration
bnx2x: Remove useless DMA-32 fallback configuration
et131x: Remove useless DMA-32 fallback configuration
be2net: Remove useless DMA-32 fallback configuration
vmxnet3: Remove useless DMA-32 fallback configuration
bna: Simplify DMA setting
net: alteon: Simplify DMA setting
myri10ge: Simplify DMA setting
qlcnic: Simplify DMA setting
net: allwinner: Fix print format
page_pool: remove spinlock in page_pool_refill_alloc_cache()
amt: fix wrong return type of amt_send_membership_update()
...
This KUnit update for Linux 5.17-rc1 consists of several fixes and
enhancements. A few highlights:
- Option --kconfig_add option allows easily tweaking kunitconfigs
- make build subcommand can reconfigure if needed
- doesn't error on tests without test plans
- doesn't crash if no parameters are generated
- defaults --jobs to # of cups
- reports test parameter results as (K)TAP subtests
-----BEGIN PGP SIGNATURE-----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=vGqB
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"This consists of several fixes and enhancements. A few highlights:
- Option --kconfig_add option allows easily tweaking kunitconfigs
- make build subcommand can reconfigure if needed
- doesn't error on tests without test plans
- doesn't crash if no parameters are generated
- defaults --jobs to # of cups
- reports test parameter results as (K)TAP subtests"
* tag 'linux-kselftest-kunit-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Default --jobs to number of CPUs
kunit: tool: fix newly introduced typechecker errors
kunit: tool: make `build` subcommand also reconfigure if needed
kunit: tool: delete kunit_parser.TestResult type
kunit: tool: use dataclass instead of collections.namedtuple
kunit: tool: suggest using decode_stacktrace.sh on kernel crash
kunit: tool: reconfigure when the used kunitconfig changes
kunit: tool: revamp message for invalid kunitconfig
kunit: tool: add --kconfig_add to allow easily tweaking kunitconfigs
kunit: tool: move Kconfig read_from_file/parse_from_string to package-level
kunit: tool: print parsed test results fully incrementally
kunit: Report test parameter results as (K)TAP subtests
kunit: Don't crash if no parameters are generated
kunit: tool: Report an error if any test has no subtests
kunit: tool: Do not error on tests without test plans
kunit: add run_checks.py script to validate kunit changes
Documentation: kunit: remove claims that kunit is a mocking framework
kunit: tool: fix --json output for skipped tests
This Kselftest update for Linux 5.17-rc1 consists of fixes to build
errors, false negatives, and several code cleanups, including the
ARRAY_SIZE cleanup that removes 25+ duplicates ARRAY_SIZE defines
from individual tests.
-----BEGIN PGP SIGNATURE-----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=r9GV
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest update from Shuah Khan:
"Fixes to build errors, false negatives, and several code cleanups,
including the ARRAY_SIZE cleanup that removes 25+ duplicates
ARRAY_SIZE defines from individual tests"
* tag 'linux-kselftest-next-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/vm: remove ARRAY_SIZE define from individual tests
selftests/timens: remove ARRAY_SIZE define from individual tests
selftests/sparc64: remove ARRAY_SIZE define from adi-test
selftests/seccomp: remove ARRAY_SIZE define from seccomp_benchmark
selftests/rseq: remove ARRAY_SIZE define from individual tests
selftests/net: remove ARRAY_SIZE define from individual tests
selftests/landlock: remove ARRAY_SIZE define from common.h
selftests/ir: remove ARRAY_SIZE define from ir_loopback.c
selftests/core: remove ARRAY_SIZE define from close_range_test.c
selftests/cgroup: remove ARRAY_SIZE define from cgroup_util.h
selftests/arm64: remove ARRAY_SIZE define from vec-syscfg.c
tools: fix ARRAY_SIZE defines in tools and selftests hdrs
selftests: cgroup: build error multiple outpt files
selftests/move_mount_set_group remove unneeded conversion to bool
selftests/mount: remove unneeded conversion to bool
selftests: harness: avoid false negatives if test has no ASSERTs
selftests/ftrace: make kprobe profile testcase description unique
selftests: clone3: clone3: add case CLONE3_ARGS_NO_TEST
selftests: timers: Remove unneeded semicolon
kselftests: timers:Remove unneeded semicolon
- Improve seccomp selftests in support of signal handler refactoring (Kees Cook)
-----BEGIN PGP SIGNATURE-----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=JeMn
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"The core seccomp code hasn't changed for this cycle, but the selftests
were improved while helping to debug the recent signal handling
refactoring work Eric did.
Summary:
- Improve seccomp selftests in support of signal handler refactoring
(Kees Cook)"
* tag 'seccomp-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Report event mismatches more clearly
selftests/seccomp: Stop USER_NOTIF test if kcmp() fails
In 'perf report', entering a recursive function from inside of itself
(either directly of indirectly through some other function) results in
calling symbol__annotate2 multiple() times, and freeing the whole
disassembly when exiting from the innermost instance.
The first issue causes the function's disassembly to be duplicated, and
the latter a heap use-after-free (and crash) when trying to access the
disassembly again.
I reproduced the bug on perf 5.11.22 (Ubuntu 20.04.3 LTS) and 5.16.rc8
with the following testcase (compile with gcc recursive.c -o recursive).
To reproduce:
- perf record ./recursive
- perf report
- enter fibonacci and annotate it
- move the cursor on one of the "callq fibonacci" instructions and press enter
- at this point there will be two copies of the function in the disassembly
- go back by pressing q, and perf will crash
#include <stdio.h>
int fibonacci(int n)
{
if(n <= 2) return 1;
return fibonacci(n-1) + fibonacci(n-2);
}
int main()
{
printf("%d\n", fibonacci(40));
}
This patch addresses the issue by annotating a function and freeing the
associated memory on exit only if no annotation is already present, so
that a recursive function is only annotated on entry.
Signed-off-by: Dario Petrillo <dario.pk1@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@kernel.org
Link: http://lore.kernel.org/lkml/20220109234441.325106-1-dario.pk1@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update the arch_support_sort_key() function in powerpc to enable
presenting local and global variants of sort key 'p_stage_cyc'.
Update the "se_header" strings for these in arch_perf_header_entry()
along with instruction latency.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20211203022038.48240-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sort key 'p_stage_cyc' is used to present the latency cycles spent in
pipeline stages.
perf has local 'p_stage_cyc' sort key to display this info. There is no
global variant available for this sort key. The local variant shows
latency in a single sample, whereas the global value will be useful to
present the total latency (sum of latencies) in the hist entry. It
represents the latency number multiplied by the number of samples.
Add global ('p_stage_cyc') and local variant ('local_p_stage_cyc') for
this sort key. Use 'local_p_stage_cyc' as default option for "mem" sort
mode.
Also add this to the list of dynamic sort keys and made the
"dynamic_headers" and "arch_specific_sort_keys" as static.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20211203022038.48240-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
from poison memory and error injection into SGX pages
- A bunch of changes to the SGX selftests to simplify and allow of SGX
features testing without the need of a whole SGX software stack
- Add a sysfs attribute which is supposed to show the amount of SGX
memory in a NUMA node, similar to what /proc/meminfo is to normal
memory
- The usual bunch of fixes and cleanups too
-----BEGIN PGP SIGNATURE-----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=vFTM
-----END PGP SIGNATURE-----
Merge tag 'x86_sgx_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Borislav Petkov:
- Add support for handling hw errors in SGX pages: poisoning,
recovering from poison memory and error injection into SGX pages
- A bunch of changes to the SGX selftests to simplify and allow of SGX
features testing without the need of a whole SGX software stack
- Add a sysfs attribute which is supposed to show the amount of SGX
memory in a NUMA node, similar to what /proc/meminfo is to normal
memory
- The usual bunch of fixes and cleanups too
* tag 'x86_sgx_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/sgx: Fix NULL pointer dereference on non-SGX systems
selftests/sgx: Fix corrupted cpuid macro invocation
x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node
x86/sgx: Fix minor documentation issues
selftests/sgx: Add test for multiple TCS entry
selftests/sgx: Enable multiple thread support
selftests/sgx: Add page permission and exception test
selftests/sgx: Rename test properties in preparation for more enclave tests
selftests/sgx: Provide per-op parameter structs for the test enclave
selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed
selftests/sgx: Move setup_test_encl() to each TEST_F()
selftests/sgx: Encpsulate the test enclave creation
selftests/sgx: Dump segments and /proc/self/maps only on failure
selftests/sgx: Create a heap for the test enclave
selftests/sgx: Make data measurement for an enclave segment optional
selftests/sgx: Assign source for each segment
selftests/sgx: Fix a benign linker warning
x86/sgx: Add check for SGX pages to ghes_do_memory_failure()
x86/sgx: Add hook to error injection address validation
x86/sgx: Hook arch_memory_failure() into mainline code
...
- KCSAN enabled for arm64.
- Additional kselftests to exercise the syscall ABI w.r.t. SVE/FPSIMD.
- Some more SVE clean-ups and refactoring in preparation for SME support
(scalable matrix extensions).
- BTI clean-ups (SYM_FUNC macros etc.)
- arm64 atomics clean-up and codegen improvements.
- HWCAPs for FEAT_AFP (alternate floating point behaviour) and
FEAT_RPRESS (increased precision of reciprocal estimate and reciprocal
square root estimate).
- Use SHA3 instructions to speed-up XOR.
- arm64 unwind code refactoring/unification.
- Avoid DC (data cache maintenance) instructions when DCZID_EL0.DZP == 1
(potentially set by a hypervisor; user-space already does this).
- Perf updates for arm64: support for CI-700, HiSilicon PCIe PMU,
Marvell CN10K LLC-TAD PMU, miscellaneous clean-ups.
- Other fixes and clean-ups; highlights: fix the handling of erratum
1418040, correct the calculation of the nomap region boundaries,
introduce io_stop_wc() mapped to the new DGH instruction (data
gathering hint).
-----BEGIN PGP SIGNATURE-----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=ecyi
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- KCSAN enabled for arm64.
- Additional kselftests to exercise the syscall ABI w.r.t. SVE/FPSIMD.
- Some more SVE clean-ups and refactoring in preparation for SME
support (scalable matrix extensions).
- BTI clean-ups (SYM_FUNC macros etc.)
- arm64 atomics clean-up and codegen improvements.
- HWCAPs for FEAT_AFP (alternate floating point behaviour) and
FEAT_RPRESS (increased precision of reciprocal estimate and
reciprocal square root estimate).
- Use SHA3 instructions to speed-up XOR.
- arm64 unwind code refactoring/unification.
- Avoid DC (data cache maintenance) instructions when DCZID_EL0.DZP ==
1 (potentially set by a hypervisor; user-space already does this).
- Perf updates for arm64: support for CI-700, HiSilicon PCIe PMU,
Marvell CN10K LLC-TAD PMU, miscellaneous clean-ups.
- Other fixes and clean-ups; highlights: fix the handling of erratum
1418040, correct the calculation of the nomap region boundaries,
introduce io_stop_wc() mapped to the new DGH instruction (data
gathering hint).
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
arm64: Use correct method to calculate nomap region boundaries
arm64: Drop outdated links in comments
arm64: perf: Don't register user access sysctl handler multiple times
drivers: perf: marvell_cn10k: fix an IS_ERR() vs NULL check
perf/smmuv3: Fix unused variable warning when CONFIG_OF=n
arm64: errata: Fix exec handling in erratum 1418040 workaround
arm64: Unhash early pointer print plus improve comment
asm-generic: introduce io_stop_wc() and add implementation for ARM64
arm64: Ensure that the 'bti' macro is defined where linkage.h is included
arm64: remove __dma_*_area() aliases
docs/arm64: delete a space from tagged-address-abi
arm64: Enable KCSAN
kselftest/arm64: Add pidbench for floating point syscall cases
arm64/fp: Add comments documenting the usage of state restore functions
kselftest/arm64: Add a test program to exercise the syscall ABI
kselftest/arm64: Allow signal tests to trigger from a function
kselftest/arm64: Parameterise ptrace vector length information
arm64/sve: Minor clarification of ABI documentation
arm64/sve: Generalise vector length configuration prctl() for SME
arm64/sve: Make sysctl interface for SVE reusable by SME
...
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next. This
includes one patch to update ovs and act_ct to use nf_ct_put() instead
of nf_conntrack_put().
1) Add netns_tracker to nfnetlink_log and masquerade, from Eric Dumazet.
2) Remove redundant rcu read-size lock in nf_tables packet path.
3) Replace BUG() by WARN_ON_ONCE() in nft_payload.
4) Consolidate rule verdict tracing.
5) Replace WARN_ON() by WARN_ON_ONCE() in nf_tables core.
6) Make counter support built-in in nf_tables.
7) Add new field to conntrack object to identify locally generated
traffic, from Florian Westphal.
8) Prevent NAT from shadowing well-known ports, from Florian Westphal.
9) Merge nf_flow_table_{ipv4,ipv6} into nf_flow_table_inet, also from
Florian.
10) Remove redundant pointer in nft_pipapo AVX2 support, from Colin Ian King.
11) Replace opencoded max() in conntrack, from Jiapeng Chong.
12) Update conntrack to use refcount_t API, from Florian Westphal.
13) Move ip_ct_attach indirection into the nf_ct_hook structure.
14) Constify several pointer object in the netfilter codebase,
from Florian Westphal.
15) Tree-wide replacement of nf_conntrack_put() by nf_ct_put(), also
from Florian.
16) Fix egress splat due to incorrect rcu notation, from Florian.
17) Move stateful fields of connlimit, last, quota, numgen and limit
out of the expression data area.
18) Build a blob to represent the ruleset in nf_tables, this is a
requirement of the new register tracking infrastructure.
19) Add NFT_REG32_NUM to define the maximum number of 32-bit registers.
20) Add register tracking infrastructure to skip redundant
store-to-register operations, this includes support for payload,
meta and bitwise expresssions.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next: (32 commits)
netfilter: nft_meta: cancel register tracking after meta update
netfilter: nft_payload: cancel register tracking after payload update
netfilter: nft_bitwise: track register operations
netfilter: nft_meta: track register operations
netfilter: nft_payload: track register operations
netfilter: nf_tables: add register tracking infrastructure
netfilter: nf_tables: add NFT_REG32_NUM
netfilter: nf_tables: add rule blob layout
netfilter: nft_limit: move stateful fields out of expression data
netfilter: nft_limit: rename stateful structure
netfilter: nft_numgen: move stateful fields out of expression data
netfilter: nft_quota: move stateful fields out of expression data
netfilter: nft_last: move stateful fields out of expression data
netfilter: nft_connlimit: move stateful fields out of expression data
netfilter: egress: avoid a lockdep splat
net: prefer nf_ct_put instead of nf_conntrack_put
netfilter: conntrack: avoid useless indirection during conntrack destruction
netfilter: make function op structures const
netfilter: core: move ip_ct_attach indirection to struct nf_ct_hook
netfilter: conntrack: convert to refcount_t api
...
====================
Link: https://lore.kernel.org/r/20220109231640.104123-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Revert "libtraceevent: Increase libtraceevent logging when verbose", breaks the build
with libtraceevent-1.3.0, i.e. when building with 'LIBTRACEEVENT_DYNAMIC=1'.
- Avoid early exit in 'perf trace' due to running SIGCHLD handler before it
makes sense to. It can happen when using a BPF source code event that have
to be first built into an object file.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYdrrXQAKCRCyPKLppCJ+
J1KLAPwKLu7Mxj5sc0EMB3WJr48PUTaAzNt9GYhfxuok3x6bBgEAvXQL5olib/0A
9sLhZrKVHqeQKApgFtkzOVT6DoNVwwg=
=0r49
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Revert "libtraceevent: Increase libtraceevent logging when verbose",
breaks the build with libtraceevent-1.3.0, i.e. when building with
'LIBTRACEEVENT_DYNAMIC=1'.
- Avoid early exit in 'perf trace' due to running SIGCHLD handler
before it makes sense to. It can happen when using a BPF source code
event that have to be first built into an object file.
* tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
Revert "libtraceevent: Increase libtraceevent logging when verbose"
perf trace: Avoid early exit due to running SIGCHLD handler before it makes sense to
MPTCP join self-tests are a bit fragile as they reply on
delays instead of events to catch-up with the expected
sockets states.
Replace the delay with state checking where possible and
reduce the number of sleeps in the most complex scenarios.
This will both reduce the tests run-time and will improve
stability.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 08efcb4a63.
This breaks the build as it will prefer using libbpf-devel header files,
even when not using LIBBPF_DYNAMIC=1, breaking the build.
This was detected on OpenSuSE Tumbleweed with libtraceevent-devel 1.3.0,
as described by Jiri Slaby:
=======================================================================
It breaks build with LIBTRACEEVENT_DYNAMIC and version 1.3.0:
> util/debug.c: In function ‘perf_debug_option’:
> util/debug.c:243:17: error: implicit declaration of function
‘tep_set_loglevel’ [-Werror=implicit-function-declaration]
> 243 | tep_set_loglevel(TEP_LOG_INFO);
> | ^~~~~~~~~~~~~~~~
> util/debug.c:243:34: error: ‘TEP_LOG_INFO’ undeclared (first use in this
function); did you mean ‘TEP_PRINT_INFO’?
> 243 | tep_set_loglevel(TEP_LOG_INFO);
> | ^~~~~~~~~~~~
> | TEP_PRINT_INFO
> util/debug.c:243:34: note: each undeclared identifier is reported only once
for each function it appears in
> util/debug.c:245:34: error: ‘TEP_LOG_DEBUG’ undeclared (first use in this
function)
> 245 | tep_set_loglevel(TEP_LOG_DEBUG);
> | ^~~~~~~~~~~~~
> util/debug.c:247:34: error: ‘TEP_LOG_ALL’ undeclared (first use in this
function)
> 247 | tep_set_loglevel(TEP_LOG_ALL);
> | ^~~~~~~~~~~
It is because the gcc's command line looks like:
gcc
...
-I/home/abuild/rpmbuild/BUILD/tools/lib/
...
-DLIBTRACEEVENT_VERSION=65790
...
=======================================================================
The proper way to fix this is more involved and so not suitable for this
late in the 5.16-rc stage.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/lkml/bc2b0786-8965-1bcd-2316-9d9bb37b9c31@kernel.org
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/lkml/YddGjjmlMZzxUZbN@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When running 'perf trace' with an BPF object like:
# perf trace -e openat,tools/perf/examples/bpf/hello.c
the event parsing eventually calls llvm__get_kbuild_opts() that runs a
script and that ends up with SIGCHLD delivered to the 'perf trace'
handler, which assumes the workload process is done and quits 'perf
trace'.
Move the SIGCHLD handler setup directly to trace__run(), where the event
is parsed and the object is already compiled.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Christy Lee <christyc.y.lee@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220106222030.227499-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that core kvm_util declarations have special home in
kvm_util_base.h, move ucall-related declarations out into a separate
header.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20211210164620.11636-3-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Between helper macros and interfaces that will be introduced in
subsequent patches, much of kvm_util.h would end up being declarations
specific to ucall. Ideally these could be separated out into a separate
header since they are not strictly required for writing guest tests and
are mostly self-contained interfaces other than a reliance on a few
core declarations like struct kvm_vm. This doesn't make a big
difference as far as how tests will be compiled/written since all these
interfaces will still be packaged up into a single/common libkvm.a used
by all tests, but it is still nice to be able to compartmentalize to
improve readabilty and reduce merge conflicts in the future for common
tasks like adding new interfaces to kvm_util.h.
Furthermore, some of the ucall declarations will be arch-specific,
requiring various #ifdef'ery in kvm_util.h. Ideally these declarations
could live in separate arch-specific headers, e.g.
include/<arch>/ucall.h, which would handle arch-specific declarations
as well as pulling in common ucall-related declarations shared by all
archs.
One simple way to do this would be to #include ucall.h at the bottom of
kvm_util.h, after declarations it relies upon like struct kvm_vm.
This is brittle however, and doesn't scale easily to other sets of
interfaces that may be added in the future.
Instead, move all declarations currently in kvm_util.h into
kvm_util_base.h, then have kvm_util.h #include it. With this change,
non-base declarations can be selectively moved/introduced into separate
headers, which can then be included in kvm_util.h so that individual
tests don't need to be touched. Subsequent patches will then move
ucall-related declarations into a separate header to meet the above
goals.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20211210164620.11636-2-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds basic support for delivering 2 level event channels to a guest.
Initially, it only supports delivery via the IRQ routing table, triggered
by an eventfd. In order to do so, it has a kvm_xen_set_evtchn_fast()
function which will use the pre-mapped shared_info page if it already
exists and is still valid, while the slow path through the irqfd_inject
workqueue will remap the shared_info page if necessary.
It sets the bits in the shared_info page but not the vcpu_info; that is
deferred to __kvm_xen_has_interrupt() which raises the vector to the
appropriate vCPU.
Add a 'verbose' mode to xen_shinfo_test while adding test cases for this.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211210163625.2886-5-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add tests to confirm mirror vms can only run correct subset of commands.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20211208191642.3792819-4-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TEST_ASSERT in SEV ioctl was allowing errors because it checked return
value was good OR the FW error code was OK. This TEST_ASSERT should
require both (aka. AND) values are OK. Removes the LAUNCH_START from the
mirror VM because this call correctly fails because mirror VMs cannot
call this command. Currently issues with the PSP driver functions mean
the firmware error is not always reset to SEV_RET_SUCCESS when a call is
successful. Mainly sev_platform_init() doesn't correctly set the fw
error if the platform has already been initialized.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20211208191642.3792819-3-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mirrors should not be able to call LAUNCH_START. Remove the call on the
mirror to correct the test before fixing sev_ioctl() to correctly assert
on this failed ioctl.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20211208191642.3792819-2-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
-----BEGIN PGP SIGNATURE-----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=Ao1E
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-5.17-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 5.17, take #1
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
-----BEGIN PGP SIGNATURE-----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=HkZk
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.16
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
Verify that, when multiple endpoints are available, subflows
creation proceed even when the first additional subflow creation
fails - due to packet drop on the relevant link
Co-developed-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include into the path manager status a bitmap tracking the list
of local endpoints still available - not yet used - for the
relevant mptcp socket.
Keep such map updated at endpoint creation/deletion time, so
that we can easily skip already used endpoint at local address
selection time.
The endpoint used by the initial subflow is lazyly accounted at
subflow creation time: the usage bitmap is be up2date before
endpoint selection and we avoid such unneeded task in some relevant
scenarios - e.g. busy servers accepting incoming subflows but
not creating any additional ones nor annuncing additional addresses.
Overall this allows for fair local endpoints usage in case of
subflow failure.
As a side effect, this patch also enforces that each endpoint
is used at most once for each mptcp connection.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Performs several disconnect/reconnect on the same socket,
ensuring the overall transfer is succesful.
The new test leverages ioctl(SIOCOUTQ) to ensure all the
pending data is acked before disconnecting.
Additionally order alphabetically the test program arguments list
for better maintainability.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Refcount leak in ipt_CLUSTERIP rule loading path, from Xin Xiong.
2) Use socat in netfilter selftests, from Hangbin Liu.
3) Skip layer checksum 4 update for IP fragments.
4) Missing allocation of pcpu scratch maps on clone in
nft_set_pipapo, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone
netfilter: nft_payload: do not update layer 4 checksum when mangling fragments
selftests: netfilter: switch to socat for tests using -q option
netfilter: ipt_CLUSTERIP: fix refcount leak in clusterip_tg_check()
====================
Link: https://lore.kernel.org/r/20220106215139.170824-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2022-01-06
We've added 41 non-merge commits during the last 2 day(s) which contain
a total of 36 files changed, 1214 insertions(+), 368 deletions(-).
The main changes are:
1) Various fixes in the verifier, from Kris and Daniel.
2) Fixes in sockmap, from John.
3) bpf_getsockopt fix, from Kuniyuki.
4) INET_POST_BIND fix, from Menglong.
5) arm64 JIT fix for bpf pseudo funcs, from Hou.
6) BPF ISA doc improvements, from Christoph.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits)
bpf: selftests: Add bind retry for post_bind{4, 6}
bpf: selftests: Use C99 initializers in test_sock.c
net: bpf: Handle return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND()
bpf/selftests: Test bpf_d_path on rdonly_mem.
libbpf: Add documentation for bpf_map batch operations
selftests/bpf: Don't rely on preserving volatile in PT_REGS macros in loop3
xdp: Add xdp_do_redirect_frame() for pre-computed xdp_frames
xdp: Move conversion to xdp_frame out of map functions
page_pool: Store the XDP mem id
page_pool: Add callback to init pages when they are allocated
xdp: Allow registering memory model without rxq reference
samples/bpf: xdpsock: Add timestamp for Tx-only operation
samples/bpf: xdpsock: Add time-out for cleaning Tx
samples/bpf: xdpsock: Add sched policy and priority support
samples/bpf: xdpsock: Add cyclic TX operation capability
samples/bpf: xdpsock: Add clockid selection support
samples/bpf: xdpsock: Add Dest and Src MAC setting for Tx-only operation
samples/bpf: xdpsock: Add VLAN support for Tx-only operation
libbpf 1.0: Deprecate bpf_object__find_map_by_offset() API
libbpf 1.0: Deprecate bpf_map__is_offload_neutral()
...
====================
Link: https://lore.kernel.org/r/20220107013626.53943-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With previous patch, kernel is able to 'put_port' after sys_bind()
fails. Add the test for that case: rebind another port after
sys_bind() fails. If the bind success, it means previous bind
operation is already undoed.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220106132022.3470772-4-imagedong@tencent.com
The second parameter of bpf_d_path() can only accept writable
memories. Rdonly_mem obtained from bpf_per_cpu_ptr() can not
be passed into bpf_d_path for modification. This patch adds
a selftest to verify this behavior.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220106205525.2116218-1-haoluo@google.com
This adds documention for:
- bpf_map_delete_batch()
- bpf_map_lookup_batch()
- bpf_map_lookup_and_delete_batch()
- bpf_map_update_batch()
This also updates the public API for the `keys` parameter
of `bpf_map_delete_batch()`, and both the
`keys` and `values` parameters of `bpf_map_update_batch()`
to be constants.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220106201304.112675-1-grantseltzer@gmail.com
PT_REGS*() macro on some architectures force-cast struct pt_regs to
other types (user_pt_regs, etc) and might drop volatile modifiers, if any.
Volatile isn't really required as pt_regs value isn't supposed to change
during the BPF program run, so this is correct behavior.
But progs/loop3.c relies on that volatile modifier to ensure that loop
is preserved. Fix loop3.c by declaring i and sum variables as volatile
instead. It preserves the loop and makes the test pass on all
architectures (including s390x which is currently broken).
Fixes: 3cc31d7940 ("libbpf: Normalize PT_REGS_xxx() macro definitions")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220106205156.955373-1-andrii@kernel.org
When a task is writing to an fd opened by a different task, the perm check
should use the cgroup namespace of the latter task. Add a test for it.
Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When a task is writing to an fd opened by a different task, the perm check
should use the credentials of the latter task. Add a test for it.
Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
0644 is an odd perm to create a cgroup which is a directory. Use the regular
0755 instead. This is necessary for euid switching test case.
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Eric Dumazet suggested to allow users to modify max GRO packet size.
We have seen GRO being disabled by users of appliances (such as
wifi access points) because of claimed bufferbloat issues,
or some work arounds in sch_cake, to split GRO/GSO packets.
Instead of disabling GRO completely, one can chose to limit
the maximum packet size of GRO packets, depending on their
latency constraints.
This patch adds a per device gro_max_size attribute
that can be changed with ip link command.
ip link set dev eth0 gro_max_size 16000
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We add initial support for RISC-V 64-bit in KVM selftests using
which we can cross-compile and run arch independent tests such as:
demand_paging_test
dirty_log_test
kvm_create_max_vcpus,
kvm_page_table_test
set_memory_region_test
kvm_binary_stats_test
All VM guest modes defined in kvm_util.h require at least 48-bit
guest virtual address so to use KVM RISC-V selftests hardware
need to support at least Sv48 MMU for guest (i.e. VS-mode).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com>
We add EXTRA_CFLAGS to the common CFLAGS of top-level Makefile which will
allow users to pass additional compile-time flags such as "-static".
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-and-tested-by: Sean Christopherson <seanjc@google.com>
The nc cmd(nmap-ncat) that distributed with Fedora/Red Hat does not have
option -q. This make some tests failed with:
nc: invalid option -- 'q'
Let's switch to socat which is far more dependable.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When the -L option of the testptp utility is specified with other
options (e.g. -p to enable PPS output), the user probably wants to
apply it to the pin configured by the -L option.
Reorder the code to set the pin function before other function requests
to avoid confusing users.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20220105152506.3256026-1-mlichvar@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If repeated legacy kprobes on same function in one process,
libbpf will register using the same probe name and got -EBUSY
error. So append index to the probe name format to fix this
problem.
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Qiang Wang <wangqiang.wq.frank@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211227130713.66933-2-wangqiang.wq.frank@bytedance.com
With perf_buffer__poll() and perf_buffer__consume() APIs available,
there is no reason to expose bpf_perf_event_read_simple() API to
users. If users need custom perf buffer, they could re-implement
the function.
Mark bpf_perf_event_read_simple() and move the logic to a new
static function so it can still be called by other functions in the
same file.
[0] Closes: https://github.com/libbpf/libbpf/issues/310
Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211229204156.13569-1-christylee@fb.com
Current release - regressions:
- Revert "xsk: Do not sleep in poll() when need_wakeup set",
made the problem worse
- Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in
__fixed_phy_register", broke EPROBE_DEFER handling
- Revert "net: usb: r8152: Add MAC pass-through support for more
Lenovo Docks", broke setups without a Lenovo dock
Current release - new code bugs:
- selftests: set amt.sh executable
Previous releases - regressions:
- batman-adv: mcast: don't send link-local multicast to mcast routers
Previous releases - always broken:
- ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY
- sctp: hold endpoint before calling cb in
sctp_transport_lookup_process
- mac80211: mesh: embed mesh_paths and mpp_paths into
ieee80211_if_mesh to avoid complicated handling of sub-object
allocation failures
- seg6: fix traceroute in the presence of SRv6
- tipc: fix a kernel-infoleak in __tipc_sendmsg()
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xIOF
-----END PGP SIGNATURE-----
Merge tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski"
"Networking fixes, including fixes from bpf, and WiFi. One last pull
request, turns out some of the recent fixes did more harm than good.
Current release - regressions:
- Revert "xsk: Do not sleep in poll() when need_wakeup set", made the
problem worse
- Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in
__fixed_phy_register", broke EPROBE_DEFER handling
- Revert "net: usb: r8152: Add MAC pass-through support for more
Lenovo Docks", broke setups without a Lenovo dock
Current release - new code bugs:
- selftests: set amt.sh executable
Previous releases - regressions:
- batman-adv: mcast: don't send link-local multicast to mcast routers
Previous releases - always broken:
- ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY
- sctp: hold endpoint before calling cb in
sctp_transport_lookup_process
- mac80211: mesh: embed mesh_paths and mpp_paths into
ieee80211_if_mesh to avoid complicated handling of sub-object
allocation failures
- seg6: fix traceroute in the presence of SRv6
- tipc: fix a kernel-infoleak in __tipc_sendmsg()"
* tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
selftests: set amt.sh executable
Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks"
sfc: The RX page_ring is optional
iavf: Fix limit of total number of queues to active queues of VF
i40e: Fix incorrect netdev's real number of RX/TX queues
i40e: Fix for displaying message regarding NVM version
i40e: fix use-after-free in i40e_sync_filters_subtask()
i40e: Fix to not show opcode msg on unsuccessful VF MAC change
ieee802154: atusb: fix uninit value in atusb_set_extended_addr
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
mac80211: initialize variable have_higher_than_11mbit
sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc
netrom: fix copying in user data in nr_setsockopt
udp6: Use Segment Routing Header for dest address if present
icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
seg6: export get_srh() for ICMP handling
Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
ipv6: Do cleanup if attribute validation fails in multipath route
ipv6: Continue processing multipath route even if gateway attribute is invalid
net/fsl: Remove leftover definition in xgmac_mdio
...
Add a new test case with mem_or_null typed register with off > 0 to ensure
it gets rejected by the verifier:
# ./test_verifier 1011
#1009/u check with invalid reg offset 0 OK
#1009/p check with invalid reg offset 0 OK
Summary: 2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
amt.sh test script will not work because it doesn't have execution
permission. So, it adds execution permission.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: c08e8baea7 ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20220105144436.13415-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Existing test cases determine secureboot state using efi variable, which
is available only on x86 architecture. Add support for determining
secureboot state using device tree property on PowerNV architecture.
Signed-off-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The tc_redirect umounts /sys in the new namespace, which can be
mounted as shared and cause global umount. The lazy umount also
takes down mounted trees under /sys like debugfs, which won't be
available after sysfs mounts again and could cause fails in other
tests.
# cat /proc/self/mountinfo | grep debugfs
34 23 0:7 / /sys/kernel/debug rw,nosuid,nodev,noexec,relatime shared:14 - debugfs debugfs rw
# cat /proc/self/mountinfo | grep sysfs
23 86 0:22 / /sys rw,nosuid,nodev,noexec,relatime shared:2 - sysfs sysfs rw
# mount | grep debugfs
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
# ./test_progs -t tc_redirect
#164 tc_redirect:OK
Summary: 1/4 PASSED, 0 SKIPPED, 0 FAILED
# mount | grep debugfs
# cat /proc/self/mountinfo | grep debugfs
# cat /proc/self/mountinfo | grep sysfs
25 86 0:22 / /sys rw,relatime shared:2 - sysfs sysfs rw
Making the sysfs private under the new namespace so the umount won't
trigger the global sysfs umount.
Reported-by: Hangbin Liu <haliu@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jussi Maki <joamaki@gmail.com>
Link: https://lore.kernel.org/bpf/20220104121030.138216-1-jolsa@kernel.org
This patch introduces new probes to check whether the kernel supports
instruction set extensions v2 and v3. The first introduced eBPF
instructions BPF_J{LT,LE,SLT,SLE} in commit 92b31a9af7 ("bpf: add
BPF_J{LT,LE,SLT,SLE} instructions"). The second introduces 32-bit
variants of all jump instructions in commit 092ed0968b ("bpf:
verifier support JMP32").
These probes are useful for userspace BPF projects that want to use newer
instruction set extensions on newer kernels, to reduce the programs'
sizes or their complexity. LLVM already provides an mcpu=probe option to
automatically probe the kernel and select the newest-supported
instruction set extension. That is however not flexible enough for all
use cases. For example, in Cilium, we only want to use the v3
instruction set extension on v5.10+, even though it is supported on all
kernels v5.1+.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/3bfedcd9898c1f41ac67ca61f144fec84c6c3a92.1641314075.git.paul@isovalent.com
This patch introduces a new probe to check whether the verifier supports
bounded loops as introduced in commit 2589726d12 ("bpf: introduce
bounded loops"). This patch will allow BPF users such as Cilium to probe
for loop support on startup and only unconditionally unroll loops on
older kernels.
The results are displayed as part of the miscellaneous section, as shown
below.
$ bpftool feature probe | grep loops
Bounded loop support is available
$ bpftool feature probe macro | grep LOOPS
#define HAVE_BOUNDED_LOOPS
$ bpftool feature probe -j | jq .misc
{
"have_large_insn_limit": true,
"have_bounded_loops": true
}
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/f7807c0b27d79f48e71de7b5a99c680ca4bd0151.1641314075.git.paul@isovalent.com
There is currently a single miscellaneous feature probe,
HAVE_LARGE_INSN_LIMIT, to check for the 1M instructions limit in the
verifier. Subsequent patches will add additional miscellaneous probes,
which follow the same pattern at the existing probe. This patch
therefore refactors the probe to avoid code duplication in subsequent
patches.
The BPF program type and the checked error numbers in the
HAVE_LARGE_INSN_LIMIT probe are changed to better generalize to other
probes. The feature probe retains its current behavior despite those
changes.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/956c9329a932c75941194f91790d01f31dfbe01b.1641314075.git.paul@isovalent.com
* kvm-arm64/selftest/irq-injection:
: .
: New tests from Ricardo Koller:
: "This series adds a new test, aarch64/vgic-irq, that validates the injection of
: different types of IRQs from userspace using various methods and configurations"
: .
KVM: selftests: aarch64: Add test for restoring active IRQs
KVM: selftests: aarch64: Add ISPENDR write tests in vgic_irq
KVM: selftests: aarch64: Add tests for IRQFD in vgic_irq
KVM: selftests: Add IRQ GSI routing library functions
KVM: selftests: aarch64: Add test_inject_fail to vgic_irq
KVM: selftests: aarch64: Add tests for LEVEL_INFO in vgic_irq
KVM: selftests: aarch64: Level-sensitive interrupts tests in vgic_irq
KVM: selftests: aarch64: Add preemption tests in vgic_irq
KVM: selftests: aarch64: Cmdline arg to set EOI mode in vgic_irq
KVM: selftests: aarch64: Cmdline arg to set number of IRQs in vgic_irq test
KVM: selftests: aarch64: Abstract the injection functions in vgic_irq
KVM: selftests: aarch64: Add vgic_irq to test userspace IRQ injection
KVM: selftests: aarch64: Add vGIC library functions to deal with vIRQ state
KVM: selftests: Add kvm_irq_line library function
KVM: selftests: aarch64: Add GICv3 register accessor library functions
KVM: selftests: aarch64: Add function for accessing GICv3 dist and redist registers
KVM: selftests: aarch64: Move gic_v3.h to shared headers
Signed-off-by: Marc Zyngier <maz@kernel.org>
The get-reg-list test ignores the Pointer Authentication features,
which is a shame now that we have relatively common HW with this feature.
Define two new configurations (with and without PMU) that exercise the
KVM capabilities.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211228121414.1013250-1-maz@kernel.org
- Fix TUI exit screen refresh race condition in 'perf top'.
- Fix parsing of Intel PT VM time correlation arguments.
- Honour CPU filtering command line request of a script's switch events in
'perf script'.
- Fix printing of switch events in Intel PT python script.
- Fix duplicate alias events list printing in 'perf list', noticed on
heterogeneous arm64 systems.
- Fix return value of ids__new(), users expect NULL for failure, not
ERR_PTR(-ENOMEM).
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYdHBrgAKCRCyPKLppCJ+
J8C0AQDT9JKQlNPMETD5F2leq0YB5O3wGKwMvgff0hyblArU7QD/Yq7d1XgMkshF
lb2dEJfGIyClnrgtTo9nikraESM5JwE=
=RTLi
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix TUI exit screen refresh race condition in 'perf top'.
- Fix parsing of Intel PT VM time correlation arguments.
- Honour CPU filtering command line request of a script's switch events
in 'perf script'.
- Fix printing of switch events in Intel PT python script.
- Fix duplicate alias events list printing in 'perf list', noticed on
heterogeneous arm64 systems.
- Fix return value of ids__new(), users expect NULL for failure, not
ERR_PTR(-ENOMEM).
* tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf top: Fix TUI exit screen refresh race condition
perf pmu: Fix alias events list
perf scripts python: intel-pt-events.py: Fix printing of switch events
perf script: Fix CPU filtering of a script's switch events
perf intel-pt: Fix parsing of VM time correlation arguments
perf expr: Fix return value of ids__new()
When the following command is executed several times, a coredump file is
generated.
$ timeout -k 9 5 perf top -e task-clock
*******
*******
*******
0.01% [kernel] [k] __do_softirq
0.01% libpthread-2.28.so [.] __pthread_mutex_lock
0.01% [kernel] [k] __ll_sc_atomic64_sub_return
double free or corruption (!prev) perf top --sort comm,dso
timeout: the monitored command dumped core
When we terminate "perf top" using sending signal method,
SLsmg_reset_smg() called. SLsmg_reset_smg() resets the SLsmg screen
management routines by freeing all memory allocated while it was active.
However SLsmg_reinit_smg() maybe be called by another thread.
SLsmg_reinit_smg() will free the same memory accessed by
SLsmg_reset_smg(), thus it results in a double free.
SLsmg_reinit_smg() is called already protected by ui__lock, so we fix
the problem by adding pthread_mutex_trylock of ui__lock when calling
SLsmg_reset_smg().
Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: wuxu.wu@huawei.com
Link: http://lore.kernel.org/lkml/a91e3943-7ddc-f5c0-a7f5-360f073c20e6@huawei.com
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: yaowenbin <yaowenbin1@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 0e0ae87422 ("perf list: Display hybrid PMU events with cpu
type") changes the event list for uncore PMUs or arm64 heterogeneous CPU
systems, such that duplicate aliases are incorrectly listed per PMU
(which they should not be), like:
# perf list
...
unc_cbo_cache_lookup.any_es
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in E or S-state]
unc_cbo_cache_lookup.any_es
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in E or S-state]
unc_cbo_cache_lookup.any_i
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in I-state]
unc_cbo_cache_lookup.any_i
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in I-state]
...
Notice how the events are listed twice.
The named commit changed how we remove duplicate events, in that events
for different PMUs are not treated as duplicates. I suppose this is to
handle how "Each hybrid pmu event has been assigned with a pmu name".
Fix PMU alias listing by restoring behaviour to remove duplicates for
non-hybrid PMUs.
Fixes: 0e0ae87422 ("perf list: Display hybrid PMU events with cpu type")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1640103090-140490-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As Paolo pointed out, the result of ping IPv6 address depends on
the running distro. So explicitly checking the available ping feature,
as e.g. do the bareudp.sh self-tests.
Fixes: 8b3170e075 ("selftests: net: using ping6 for IPv6 in udpgro_fwd.sh")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Link: https://lore.kernel.org/r/825ee22b-4245-dbf7-d2f7-a230770d6e21@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-12-31
We've added 2 non-merge commits during the last 14 day(s) which contain
a total of 2 files changed, 3 insertions(+), 3 deletions(-).
The main changes are:
1) Revert of an earlier attempt to fix xsk's poll() behavior where it
turned out that the fix for a rare problem made it much worse in
general, from Magnus Karlsson. (Fyi, Magnus mentioned that a proper
fix is coming early next year, so the revert is mainly to avoid
slipping the behavior into 5.16.)
2) Minor misc spell fix in BPF selftests, from Colin Ian King.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Fix spelling mistake "tained" -> "tainted"
Revert "xsk: Do not sleep in poll() when need_wakeup set"
====================
Link: https://lore.kernel.org/r/20211231160050.16105-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
First check /lib/modules/`uname -r`/config, before using the IKCONFIG.
In addition, the configs.ko might be compressed. Fix the configs.ko
name.
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Instead of assigning the string to a variable, which might contain a
null character, redirect the output and grep for the string directly.
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Currently, userfaultfd selftest for hugetlb as run from run_vmtests.sh
or any environment where there are 'just enough' hugetlb pages will
always fail with:
testing events (fork, remap, remove):
ERROR: UFFDIO_COPY error: -12 (errno=12, line=616)
The ENOMEM error code implies there are not enough hugetlb pages.
However, there are free hugetlb pages but they are all reserved. There
is a basic problem with the way the test allocates hugetlb pages which
has existed since the test was originally written.
Due to the way 'cleanup' was done between different phases of the test,
this issue was masked until recently. The issue was uncovered by commit
8ba6e86408 ("userfaultfd/selftests: reinitialize test context in each
test").
For the hugetlb test, src and dst areas are allocated as PRIVATE
mappings of a hugetlb file. This means that at mmap time, pages are
reserved for the src and dst areas. At the start of event testing (and
other tests) the src area is populated which results in allocation of
huge pages to fill the area and consumption of reserves associated with
the area. Then, a child is forked to fault in the dst area. Note that
the dst area was allocated in the parent and hence the parent owns the
reserves associated with the mapping. The child has normal access to
the dst area, but can not use the reserves created/owned by the parent.
Thus, if there are no other huge pages available allocation of a page
for the dst by the child will fail.
Fix by not creating reserves for the dst area. In this way the child
can use free (non-reserved) pages.
Also, MAP_PRIVATE of a file only makes sense if you are interested in
the contents of the file before making a COW copy. The test does not do
this. So, just use MAP_ANONYMOUS | MAP_HUGETLB to create an anonymous
hugetlb mapping. There is no need to create a hugetlb file in the
non-shared case.
Link: https://lkml.kernel.org/r/20211217172919.7861-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-12-30
The following pull-request contains BPF updates for your *net-next* tree.
We've added 72 non-merge commits during the last 20 day(s) which contain
a total of 223 files changed, 3510 insertions(+), 1591 deletions(-).
The main changes are:
1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii.
2) Beautify and de-verbose verifier logs, from Christy.
3) Composable verifier types, from Hao.
4) bpf_strncmp helper, from Hou.
5) bpf.h header dependency cleanup, from Jakub.
6) get_func_[arg|ret|arg_cnt] helpers, from Jiri.
7) Sleepable local storage, from KP.
8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
commit 077cdda764 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
commit 31108d142f ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
commit 4390c6edc0 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/
net/smc/smc_wr.c
commit 49dc9013e3 ("net/smc: Use the bitmap API when applicable")
commit 349d43127d ("net/smc: fix kernel panic caused by race of smc_sock")
bitmap_zero()/memset() is removed by the fix
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udpgro_fwd.sh output following message:
ping: 2001:db8:1:💯 Address family for hostname not supported
Using ping6 when pinging IPv6 addresses.
Fixes: a062260a9d ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the spin lock logic and update the selftests to use sleepable
programs to use a mix of sleepable and non-sleepable programs. It's more
useful to test the sleepable programs since the tests don't really need
spinlocks.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211224152916.1550677-3-kpsingh@kernel.org
udpgso_bench_tx call setup_sockaddr() for dest address before
parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}",
then ${dst_port} will be ignored, and using default cfg_port 8000.
This will cause test case "multiple GRO socks" failed in udpgro.sh.
Setup sockaddr after parsing all arguments.
Fixes: 3a687bef14 ("selftests: udp gso benchmark")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ubuntu reports incorrect kernel version through uname(), which on older
kernels leads to kprobe BPF programs failing to load due to the version
check mismatch.
Accommodate Ubuntu's quirks with LINUX_VERSION_CODE by using
Ubuntu-specific /proc/version_code to fetch major/minor/patch versions
to form LINUX_VERSION_CODE.
While at it, consolide libbpf's kernel version detection code between
libbpf.c and libbpf_probes.c.
[0] Closes: https://github.com/libbpf/libbpf/issues/421
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211222231003.2334940-1-andrii@kernel.org
Improve bpf_tracing.h's macro definition readability by keeping them
single-line and better aligned. This makes it easier to follow all those
variadic patterns.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211222213924.1869758-2-andrii@kernel.org
Refactor PT_REGS macros definitions in bpf_tracing.h to avoid excessive
duplication. We currently have classic PT_REGS_xxx() and CO-RE-enabled
PT_REGS_xxx_CORE(). We are about to add also _SYSCALL variants, which
would require excessive copying of all the per-architecture definitions.
Instead, separate architecture-specific field/register names from the
final macro that utilize them. That way for upcoming _SYSCALL variants
we'll be able to just define x86_64 exception and otherwise have one
common set of _SYSCALL macro definitions common for all architectures.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20211222213924.1869758-1-andrii@kernel.org
The intel-pt-events.py script displays only the last of consecutive switch
statements but that may not be the last switch event for the CPU. Fix by
keeping a dictionary of last context switch keyed by CPU, and make it
possible to see all switch events by adding option --all-switch-events.
Fixes: a92bf335fd ("perf scripts python: intel-pt-events.py: Add branches to script")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211215080636.149562-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CPU filtering was not being applied to a script's switch events.
Fixes: 5bf83c29a0 ("perf script: Add scripting operation process_switch()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211215080636.149562-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Parser did not take ':' into account.
Example:
Before:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.026 MB perf.data ]
$ perf inject -i perf.data --vm-time-correlation="dry-run 123"
$ perf inject -i perf.data --vm-time-correlation="dry-run 123:456"
Failed to parse VM Time Correlation options
0x620 [0x98]: failed to process type: 70 [Invalid argument]
$
After:
$ perf inject -i perf.data --vm-time-correlation="dry-run 123:456"
$
Fixes: e3ff42bdeb ("perf intel-pt: Parse VM Time Correlation options and set up decoding")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211215080636.149562-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
callers of ids__new() function only do NULL checking for the return
value. ids__new() calles hashmap__new(), which may return
ERR_PTR(-ENOMEM).
Instead of changing the checking one-by-one return NULL instead of
ERR_PTR(-ENOMEM) to keep it consistent.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: German Gomez <german.gomez@arm.com>
Tested-by: German Gomez <german.gomez@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211214011030.20200-1-linmq006@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test that restores multiple IRQs in active state, it does it by
writing into ISACTIVER from the guest and using KVM ioctls. This test
tries to emulate what would happen during a live migration: restore
active IRQs.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-18-ricarkol@google.com
Add injection tests that use writing into the ISPENDR register (to mark
IRQs as pending). This is typically used by migration code.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-17-ricarkol@google.com
Add an architecture independent wrapper function for creating and
writing IRQ GSI routing tables. Also add a function to add irqchip
entries.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-15-ricarkol@google.com
Add tests for failed injections to vgic_irq. This tests that KVM can
handle bogus IRQ numbers.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-14-ricarkol@google.com
Add injection tests for the LEVEL_INFO ioctl (level-sensitive specific)
into vgic_irq.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-13-ricarkol@google.com
Add a cmdline arg for using level-sensitive interrupts (vs the default
edge-triggered). Then move the handler into a generic handler function
that takes the type of interrupt (level vs. edge) as an arg. When
handling line-sensitive interrupts it sets the line to low after
acknowledging the IRQ.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-12-ricarkol@google.com
Add tests for IRQ preemption (having more than one activated IRQ at the
same time). This test injects multiple concurrent IRQs and handles them
without handling the actual exceptions. This is done by masking
interrupts for the whole test.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-11-ricarkol@google.com
Add a new cmdline arg to set the EOI mode for all vgic_irq tests. This
specifies whether a write to EOIR will deactivate IRQs or not.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-10-ricarkol@google.com
Add the ability to specify the number of vIRQs exposed by KVM (arg
defaults to 64). Then extend the KVM_IRQ_LINE test by injecting all
available SPIs at once (specified by the nr-irqs arg). As a bonus,
inject all SGIs at once as well.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-9-ricarkol@google.com
Build an abstraction around the injection functions, so the preparation
and checking around the actual injection can be shared between tests.
All functions are stored as pointers in arrays of kvm_inject_desc's
which include the pointer and what kind of interrupts they can inject.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-8-ricarkol@google.com
Add a new KVM selftest, vgic_irq, for testing userspace IRQ injection. This
particular test injects an SPI using KVM_IRQ_LINE on GICv3 and verifies
that the IRQ is handled in the guest. The next commits will add more
types of IRQs and different modes.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-7-ricarkol@google.com
Add a set of library functions for userspace code in selftests to deal
with vIRQ state (i.e., ioctl wrappers).
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-6-ricarkol@google.com
Add an architecture independent wrapper function for the KVM_IRQ_LINE
ioctl.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-5-ricarkol@google.com
Add a generic library function for reading and writing GICv3 distributor
and redistributor registers. Then adapt some functions to use it; more
will come and use it in the next commit.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-3-ricarkol@google.com
Move gic_v3.h to the shared headers location. There are some definitions
that will be used in the vgic-irq test.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-2-ricarkol@google.com
The 16kB page size is not a popular choice, due to only a few CPUs
actually implementing support for it. However, it can lead to some
interesting performance improvements given the right uarch choices.
Add support for this page size for various PA/VA combinations.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-7-maz@kernel.org
Some of the arm64 systems out there have an IPA space that is
positively tiny. Nonetheless, they make great KVM hosts.
Add support for 36bit IPA support with 4kB pages, which makes
some of the fruity machines happy. Whilst we're at it, add support
for 64kB pages as well, though these boxes have no support for it.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211227124809.1335409-6-maz@kernel.org
The current way we initialise TCR_EL1 is a bit cumbersome, as
we mix setting TG0 and IPS in the same swtch statement.
Split it into two statements (one for the base granule size, and
another for the IPA size), allowing new modes to be added in a
more elegant way.
No functional change intended.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-5-maz@kernel.org
Just as arm64 implemenations don't necessary support all IPA
ranges, they don't all support the same page sizes either. Fun.
Create a dummy VM to snapshot the page sizes supported by the
host, and filter the supported modes.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-4-maz@kernel.org
Contrary to popular belief, there is no such thing as a default
IPA size on arm64. Anything goes, and implementations are the
usual Wild West.
The selftest infrastructure default to 40bit IPA, which obviously
doesn't work for some systems out there.
Turn VM_MODE_DEFAULT from a constant into a variable, and let
guest_modes_append_default() populate it, depending on what
the HW can do. In order to preserve the current behaviour, we
still pick 40bits IPA as the default if it is available, and
the largest supported IPA space otherwise.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-3-maz@kernel.org
As we are going to add support for a variable default mode on arm64,
let's make sure it is setup first by using a constructor that gets
called before the actual test runs.
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-2-maz@kernel.org
Introduce a user space tool to make use of the interface exposed by
Platform Firmware Runtime Update and Telemetry drivers.
It can be used for firmware code injection, driver updates and
to retrieve platform firmware telemetry data.
Tested-by: Hongyu Ning <hongyu.ning@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge tmon fix and int340x driver improvement for 5.17-rc1.
* thermal-tools:
thermal: tools: tmon: remove unneeded local variable
* thermal-int340x:
thermal: int340x: Use struct_group() for memcpy() region
NFT_COUNTER was removed since
390ad4295aa ("netfilter: nf_tables: make counter support built-in")
LKP/0Day will check if all configs listing under selftests are able to
be enabled properly.
For the missing configs, it will report something like:
LKP WARN miss config CONFIG_NFT_COUNTER= of net/mptcp/config
- it's not reasonable to keep the deprecated configs.
- configs under kselftests are recommended by corresponding tests.
So if some configs are missing, it will impact the testing results
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ma Xinjian <xinjianx.ma@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enumerations should return a value between 0 and items-1, check that this
is the case.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211217130213.3893415-3-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To simplify the code a bit and allow future reuse factor the checks that
values we read are valid out of test_ctl_get_value() into a separate
function which can be reused later. As part of this extend the test to
check all the values for the control, not just the first one.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211217130213.3893415-2-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a test of sigreturning to an unaligned address (low two bits set).
This should have no effect because the hardware will mask those bits.
However it previously falsely triggered a warning when
CONFIG_PPC_RFI_SRR_DEBUG=y.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221135101.2085547-3-mpe@ellerman.id.au
This release adds following change:
- Update max performance when BIOS disabled turbo
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When BIOS disables turbo, the cpuinfo_max_freq will also be same as the
power up base frequency. When SST-PP causes increase in base frequency
the performance will be still limited to the old base frequency as the
cpuinfo_max_freq will not be updated.
In this case we need to update scaling_max frequency to the new
base_frequency. This will result in setting updated max performance
limit in the Pstate driver. So performance will not be limited to the
old base frequency.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The below referenced commit correctly updated the computation of number
of segments (gso_size) by using only the gso payload size and
removing the header lengths.
With this change the regression test started failing. Update
the tests to match this new behavior.
Both IPv4 and IPv6 tests are updated, as a separate patch in this series
will update udp_v6_send_skb to match this change in udp_send_skb.
Fixes: 158390e456 ("udp: using datalen to cap max gso segments")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211223222441.2975883-2-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding btf_dump__new call to test_cpp, so we can
test C++ compilation with that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211223131736.483956-2-jolsa@kernel.org
Change the case that sends packets with "too short inner packet" to
include part of ethernet header, to make the trap to be triggered due to
the correct reason.
According to ASIC arch, the trap is triggered if overlay packet length is
less than 18B, and the minimum inner packet should include source MAC and
destination MAC.
Till now the case passed because one of the reserved bits in VxLAN
header was used. This issue was found while adding an equivalent test
for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test configures VxLAN with IPv6 underlay and verifies that the
expected traps are triggered under the right conditions.
The test is similar to the existing IPv4 test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device stores flood records in a singly linked list where each
record stores up to X IP addresses of remote VTEPs.
The number of records is changed according to ASIC type and address
family.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test is dedicated for Spectrum-2 and above, which support up to four
IPv6 addresses in one record.
The test verifies that packets are correctly flooded in various cases such
as deletion of a record in the middle of the list.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device stores flood records in a singly linked list where each
record stores up to X IP addresses of remote VTEPs.
The number of records is changed according to ASIC type and address
family.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test is dedicated for Spectrum-1 switches, which support up to five
IPv6 addresses in one record.
The test verifies that packets are correctly flooded in various cases such
as deletion of a record in the middle of the list.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test to verify FDB vetos of VxLAN with IPv6 underlay.
Use the existing test which checks IPv4.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vxlan_fdb_veto.sh cases are dedicated to test VxLAN with IPv4 underlay.
The main changes to test IPv6 underlay are IP addresses and some flags.
Add variables to define all the values which supposed to be different
for IPv6 testing, set them to use the existing values by default.
The next patch will define the new added variables in a separated file,
so the same tests can be used for IPv6 also.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test to verify configuration of VxLAN with IPv6 underlay.
Use the existing test which checks IPv4.
Add separated test cases for learning which is not supported for IPv6
and for UDP checksum flags which are different from IPv4 flags.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vxlan.sh cases are dedicated to test VxLAN with IPv4 underlay.
The main changes to test IPv6 underlay are IP addresses and some flags.
Add variables to define all the values which supposed to be different
for IPv6 testing, set them to use the existing values by default.
The next patch will define the new added variables in a separated file,
so the same tests can be used for IPv6 also.
Rename some functions to include "ipv4", so the next patch will add
equivalent functions for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test to check Q-in-VNI traffic with IPv6 underlay and overlay.
The test is similar to the existing IPv4 test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a similar fashion to the asymmetric test, add a test for symmetric
routing. In symmetric routing both the ingress and egress VTEPs perform
routing in the overlay network into / from the VxLAN tunnel. Packets in
different directions use the same VNI - the L3 VNI.
Different tenants (VRFs) use different L3 VNIs.
Add a test which is similar to the existing IPv4 test to check IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In asymmetric routing the ingress VTEP routes the packet into the
correct VxLAN tunnel, whereas the egress VTEP only bridges the packet to
the correct host. Therefore, packets in different directions use
different VNIs - the target VNI.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test uses a simple topology with two VTEPs and two VNIs and verifies
that ping passes between hosts (local / remote) in the same VLAN (VNI)
and in different VLANs belonging to the same tenant (VRF).
While the test does not check VM mobility, it does configure an anycast
gateway using a macvlan device on both VTEPs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove `vxlan_ping_test()` which is not used and probably was copied
mistakenly from vxlan_bridge_1d.sh.
This was found while adding an equivalent test for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tests are very similar to their VLAN-unaware counterpart
(vxlan_bridge_1d_ipv6.sh and vxlan_bridge_1d_port_8472_ipv6.sh),
but instead of using multiple VLAN-unaware bridges, a single VLAN-aware
bridge is used with multiple VLANs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests similar to vxlan_bridge_1d.sh and vxlan_bridge_1d_port_8472.sh.
The tests set up a topology with three VxLAN endpoints: one
"local", possibly offloaded, and two "remote", formed using veth pairs
and likely purely software bridges. The "local" endpoint is connected to
host systems by a VLAN-unaware bridge.
Since VxLAN tunnels must be unique per namespace, each of the "remote"
endpoints is in its own namespace. H3 forms the bridge between the three
domains.
Send IPv4 packets and IPv6 packets with IPv6 underlay.
Use `TC_FLAG`, which is defined in `forwarding.config` file, for TC
checks. `TC_FLAG` allows testing that on HW datapath, the traffic
actually goes through HW.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently `ping_do()` and `ping6_do()` send 10 packets.
There are cases that it is not possible to catch only the interesting
packets using tc rule, so then, it is possible to send many packets and
verify that at least this amount of packets hit the rule.
Add `PING_COUNT` variable, which is set to 10 by default, to allow tests
sending more than 10 packets using the existing ping API.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If destination port is above 32k and source port below 16k
assume this might cause 'port shadowing' where a 'new' inbound
connection matches an existing one, e.g.
inbound X:41234 -> Y:53 matches existing conntrack entry
Z:53 -> X:4123, where Z got natted to X.
In this case, new packet is natted to Z:53 which is likely
unwanted.
We avoid the rewrite for connections that originate from local host:
port-shadowing is only possible with forwarded connections.
Also adjust test case.
v3: no need to call tuple_force_port_remap if already in random mode (Phil)
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add new macros for mem_hops field which can be used to represent
remote-node, socket and board level details.
Currently the code had macro for HOPS_0 which, corresponds to data
coming from another core but same node. Add new macros for HOPS_1 to
HOPS_3 to represent remote-node, socket and board level data.
Also add corresponding strings in the mem_hops array to represent
mem_hop field data in perf_mem__lvl_scnprintf function
Incase mem_hops field is used, PERF_MEM_LVLNUM field also need to be set
inorder to represent the data source. Hence printing data source via
PERF_MEM_LVL field can be skip in that scenario.
For ex: Encodings for mem_hops fields with L2 cache:
L2 - local L2
L2 | REMOTE | HOPS_0 - remote core, same node L2
L2 | REMOTE | HOPS_1 - remote node, same socket L2
L2 | REMOTE | HOPS_2 - remote socket, same board L2
L2 | REMOTE | HOPS_3 - remote board L2
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20211206091749.87585-3-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Includes some fixes that were either late breaking, low priority or
complex enough to not be good to rush in late in the cycle.
Tree rebased today to fix up some trivial issues + pull in a fix that
was previously on the fixes-togreg branch. Vast majority have been
in linux-next for some time now.
New device support
* adi,ad7293
- New driver and bindings for this Power Amplifier drain current
controller. A complex device with various related monitoring functions.
* adi,ad75513R
- New driver and bindings for this combined ADC and DAC device.
- A few follow up fixes.
* adi,admv8818
- New driver (and type) for this 2-18GHz filter device. Includes
bindings and ABI documentation to allow clk_notifier based auto
adjustment of the filters in appropriate applications.
* liteon,ltr501
- Support for the ltr303. ID and chip specific info table.
* xilinx,ams
- New generic firmware function fwnode_iomap() as used in this driver.
- New driver and bindings for this ADC and on-chip sensors as found
in various Xilinx devices.
Core
* Introduced IIO_VAL_INT_64 which uses val and val2 in IIO callbacks to
form a 64 bit integer when higher precision needed.
* Allow IIO_ENUM_AVAILABLE to be used with different shared values.
* Fix a long term issue with scheduling whilst atomic when iio_trig_poll()
is called but no trigger consumers are actually enabled and hence the
trigger may be reenabled from the interrupt handler. Seen in the wild
on the tsc2046.
* Mark iio_device_type const.
* buffer: Use a separate index variable to simplify code.
* buffer-dma: Clear out unused struct iio_buffer_block
* buffer-dmaengine: Switch to cheaper round_down() as power of 2 values.
Tests/tools
* format_value
- Check against NULL returns from allocations in tests.
- Add IIO_VAL_INT_64 test case.
* event_monitor
- Flush the output after event to given more consistent latency
when tool output piped to other programs.
Driver Features
* axp20x
- Add support for NTC thermistor channel and document TS pin binding.
* arm,scmi
- Add reading of raw channel values (using IIO_VAL_INT_64)
* liteon,ltr501
- Add proximity-near-level support and dt-binding.
Tree wide cleanup
* Remove no-op trigger ops from multiple drivers.
* Stop using dev_get_drvdata() on the iio_dev->dev in various drivers
and then stop assigning it to allow this to be used for other purposes.
We can always get to the indio_dev using dev_to_iio_dev() which is
a container_of() based approach. Also cleanup up some related unnecessary
convoluted cases.
- atmel,at91-sam5d2
- nxp,imx7d
- meas,ms5611
- st,st_sensors
* Where available (or easy to introduce) use the scan_type.* values
in place of a second copy for read_raw and similar paths.
- adi,ad7266
- bosch,bma220
- fsl,mac3110
- fsl,mma7455
- fsl,mpl3115
- kionix,kcjk-1013
- sensortek,stk8ba50
- sensortek,stk8312
- ti,adc12138
- ti,ads1015
- vti,sca3000
- xilinx,xadc-core
* Switch drives over to generic firmware properties including appropriate
header changes to avoid including of.h
- Various DACs had false CONFIG_OF dependencies.
- dpot-dac
- envelope-detector
- adi,ad5755
- adi,ad5758
- capella,cm3605
- maxim,max9611
- microchip,mcp41010
- microchip,mcp3911
- ti,adc12138
* Trivial clang warning fixes for W=1 warnings.
Driver specific cleanup and minor fixes
* adi,ad7606
- Comment fixes.
* ams,ad3935
- Drop pointless cast to the same type.
* atmel,at91-sama5d2
- Fix wrong cast of iio_dev->dev to platform_device that happened to
be harmless.
* fsl,mma7660
- Stop i2c remove() function returning an error code. Part of a rework
to eventually stop returning anything from these.
* fsl,mma8452
- Use correct type for local irqreturn_t.
* nxp,imx8mq
- Maintainer email address update.
* nxp,lpc18xx_adc
- Ensure clk_prepare_enable() called before clk_get_rate().
- Switch of.h for mod_devicetable.h to reflect no of specific functions,
just the id table.
* renesas,rzg2l
- Drop a dev_err() that just duplicates error printed in platform_get_irq()
* sgx,vz89x
- Drop pointless cast.
* st,lsm6dsx
- Make it possible to disable the sensorhub from DT to avoid a corner
case where the address of a slave device many be accidentally modified.
* st,stm32-adc
- Stop leaking an of_node in an error path.
* st,stmp2
- Avoid wrong sized type for bit field which could result in
over-reading (harmless). Precursor to enabling -Warray-bounds.
* ti,adc081c
- Put back some ACPI support for non standards compliant ADC081C
ID because it is known to be in the wild on some Aaeon boards.
* ti,ads8688
- Cleanup redundant local ret variable assignment.
* ti,ina2xx-adc
- Use helper macro kthread_run() to replace some boilerplate.
- Avoid double reference counting.
- Drop pointless cast.
* xilinx,xadc
- Make the IRQ optional as not always wired to the host system.
-----BEGIN PGP SIGNATURE-----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=xXvq
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 5.17
Includes some fixes that were either late breaking, low priority or
complex enough to not be good to rush in late in the cycle.
Tree rebased today to fix up some trivial issues + pull in a fix that
was previously on the fixes-togreg branch. Vast majority have been
in linux-next for some time now.
New device support
* adi,ad7293
- New driver and bindings for this Power Amplifier drain current
controller. A complex device with various related monitoring functions.
* adi,ad75513R
- New driver and bindings for this combined ADC and DAC device.
- A few follow up fixes.
* adi,admv8818
- New driver (and type) for this 2-18GHz filter device. Includes
bindings and ABI documentation to allow clk_notifier based auto
adjustment of the filters in appropriate applications.
* liteon,ltr501
- Support for the ltr303. ID and chip specific info table.
* xilinx,ams
- New generic firmware function fwnode_iomap() as used in this driver.
- New driver and bindings for this ADC and on-chip sensors as found
in various Xilinx devices.
Core
* Introduced IIO_VAL_INT_64 which uses val and val2 in IIO callbacks to
form a 64 bit integer when higher precision needed.
* Allow IIO_ENUM_AVAILABLE to be used with different shared values.
* Fix a long term issue with scheduling whilst atomic when iio_trig_poll()
is called but no trigger consumers are actually enabled and hence the
trigger may be reenabled from the interrupt handler. Seen in the wild
on the tsc2046.
* Mark iio_device_type const.
* buffer: Use a separate index variable to simplify code.
* buffer-dma: Clear out unused struct iio_buffer_block
* buffer-dmaengine: Switch to cheaper round_down() as power of 2 values.
Tests/tools
* format_value
- Check against NULL returns from allocations in tests.
- Add IIO_VAL_INT_64 test case.
* event_monitor
- Flush the output after event to given more consistent latency
when tool output piped to other programs.
Driver Features
* axp20x
- Add support for NTC thermistor channel and document TS pin binding.
* arm,scmi
- Add reading of raw channel values (using IIO_VAL_INT_64)
* liteon,ltr501
- Add proximity-near-level support and dt-binding.
Tree wide cleanup
* Remove no-op trigger ops from multiple drivers.
* Stop using dev_get_drvdata() on the iio_dev->dev in various drivers
and then stop assigning it to allow this to be used for other purposes.
We can always get to the indio_dev using dev_to_iio_dev() which is
a container_of() based approach. Also cleanup up some related unnecessary
convoluted cases.
- atmel,at91-sam5d2
- nxp,imx7d
- meas,ms5611
- st,st_sensors
* Where available (or easy to introduce) use the scan_type.* values
in place of a second copy for read_raw and similar paths.
- adi,ad7266
- bosch,bma220
- fsl,mac3110
- fsl,mma7455
- fsl,mpl3115
- kionix,kcjk-1013
- sensortek,stk8ba50
- sensortek,stk8312
- ti,adc12138
- ti,ads1015
- vti,sca3000
- xilinx,xadc-core
* Switch drives over to generic firmware properties including appropriate
header changes to avoid including of.h
- Various DACs had false CONFIG_OF dependencies.
- dpot-dac
- envelope-detector
- adi,ad5755
- adi,ad5758
- capella,cm3605
- maxim,max9611
- microchip,mcp41010
- microchip,mcp3911
- ti,adc12138
* Trivial clang warning fixes for W=1 warnings.
Driver specific cleanup and minor fixes
* adi,ad7606
- Comment fixes.
* ams,ad3935
- Drop pointless cast to the same type.
* atmel,at91-sama5d2
- Fix wrong cast of iio_dev->dev to platform_device that happened to
be harmless.
* fsl,mma7660
- Stop i2c remove() function returning an error code. Part of a rework
to eventually stop returning anything from these.
* fsl,mma8452
- Use correct type for local irqreturn_t.
* nxp,imx8mq
- Maintainer email address update.
* nxp,lpc18xx_adc
- Ensure clk_prepare_enable() called before clk_get_rate().
- Switch of.h for mod_devicetable.h to reflect no of specific functions,
just the id table.
* renesas,rzg2l
- Drop a dev_err() that just duplicates error printed in platform_get_irq()
* sgx,vz89x
- Drop pointless cast.
* st,lsm6dsx
- Make it possible to disable the sensorhub from DT to avoid a corner
case where the address of a slave device many be accidentally modified.
* st,stm32-adc
- Stop leaking an of_node in an error path.
* st,stmp2
- Avoid wrong sized type for bit field which could result in
over-reading (harmless). Precursor to enabling -Warray-bounds.
* ti,adc081c
- Put back some ACPI support for non standards compliant ADC081C
ID because it is known to be in the wild on some Aaeon boards.
* ti,ads8688
- Cleanup redundant local ret variable assignment.
* ti,ina2xx-adc
- Use helper macro kthread_run() to replace some boilerplate.
- Avoid double reference counting.
- Drop pointless cast.
* xilinx,xadc
- Make the IRQ optional as not always wired to the host system.
* tag 'iio-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (103 commits)
iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs
iio:addac:ad74413r: Fix uninitialized ret in a path that won't be hit.
MAINTAINERS: Add maintainer for xilinx-ams
dt-bindings: iio: adc: Add Xilinx AMS binding documentation
iio: adc: Add Xilinx AMS driver
device property: Add fwnode_iomap()
iio:accel:kxcjk-1013: Mark struct __maybe_unused to avoid warning.
iio:accel:bmc150: Mark structure __maybe_unused as only needed with for pm ops.
iio:dummy: Drop set but unused variable len.
iio:magn:ak8975: Suppress clang W=1 warning about pointer to enum conversion.
iio:imu:inv_mpu6050: Suppress clang W=1 warning about pointer to enum conversion.
iio:imu:inv_icm42600: Suppress clang W=1 warning about pointer to enum conversion.
iio:dac:mcp4725: Suppress clang W=1 warning about pointer to enum conversion.
iio:amplifiers:hmc425a: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:ti-ads1015: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:rcar: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:ina2xx-adc: Suppress clang W=1 warning about pointer to enum conversion.
iio:accel:bma180: Suppress clang W=1 warning about pointer to enum conversion.
drivers:iio:dac: Add AD3552R driver support
dt-bindings: iio: dac: Add adi,ad3552r.yaml
...
The output of bpftool prog tracelog is currently buffered, which is
inconvenient when piping the output into other commands. A simple
tracelog | grep will typically not display anything. This patch fixes it
by enabling line buffering on stdout for the whole bpftool binary.
Fixes: 30da46b5dc ("tools: bpftool: add a command to dump the trace pipe")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211220214528.GA11706@Mem
When unwinding using frame pointers on ARM64, the return address of the
current function may not have been pushed into the stack when a function
was interrupted, which makes perf show an incorrect call graph to the
user.
Consider the following example program:
void leaf() {
/* long computation */
}
void parent() {
// (1)
leaf();
// (2)
}
... could be compiled into (using gcc -fno-inline -fno-omit-frame-pointer):
leaf:
/* long computation */
nop
ret
parent:
// (1)
stp x29, x30, [sp, -16]!
mov x29, sp
bl parent
nop
ldp x29, x30, [sp], 16
// (2)
ret
If the program is interrupted at (1), (2), or any point in "leaf:", the
call graph will skip the callers of the current function. We can unwind
using the dwarf info and check if the return addr is the same as the LR
register, and inject the missing frame into the call graph.
Before this patch, the above example shows the following call-graph when
recording using "--call-graph fp" mode in ARM64:
# Children Self Command Shared Object Symbol
# ........ ........ ........ ................ ......................
#
99.86% 99.86% program3 program3 [.] leaf
|
---_start
__libc_start_main
main
leaf
As can be seen, the "parent" function is missing. This is specially
problematic in "leaf" because for leaf functions the compiler may always
omit pushing the return addr into the stack. After this patch, it shows
the correct graph:
# Children Self Command Shared Object Symbol
# ........ ........ ........ ................ ......................
#
99.86% 99.86% program3 program3 [.] leaf
|
---_start
__libc_start_main
main
parent
leaf
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-7-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
[ Rename machine__normalize_is() to machine__normalized_is(), as suggested by James Clark ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactor the SAMPL_REG macro so that it can be used in a followup commit
to obtain the masks for ARM64 registers.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-6-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable dwarf_callchain_users on arm64 which will be needed to do a
DWARF unwind in order to get the caller of the leaf frame.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-5-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactoring script__setup_sample_type() by using callchain_param_setup()
to replace the duplicate code for callchain parameter setting up.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-4-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a mechanism for platforms to inject stack frames for the leaf
frame caller if there is enough information to determine a frame
is missing from dwarf or other post processing mechanisms.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-3-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On ARM64, automatically record the link register if the frame pointer
mode is on. It will be used to do a dwarf unwind to find the caller of
the leaf frame if the frame pointer was omitted.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Alexandre Truong <alexandre.truong@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211217154521.80603-2-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is in preparation for adding more tests that will need the test
number to be 3 digts so they align nicely in the output.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20211215160403.69264-3-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* Fix for kvm_run->if_flag on SEV-ES
* Fix for page table use-after-free if yielding during exit_mm()
* Improve behavior when userspace starts a nested guest with invalid state
* Fix missed wakeup with assigned devices but no VT-d posted interrupts
* Do not tell userspace to save/restore an unsupported PMU MSR
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHCGbIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNMSwf+PpOl69xqQCHzLpDtA9MTBZZi5uKc
eZqMtQ7D+T7XYbtMiHBI9zofcbtHlQVC9Na74j8J7bCuvqe8UGS/z93RoZZQ+/dg
seEbQNEgcNlPD1G3JzaipcGhRqQl6j5G9LjuixyFpkS2O27YsRTpb1HJag31uSFV
Xd7Ih0R2YnKCNJqJov324KHpDM3c4FZL8HdCS/gG94qyLHPA2dJ8fOTwCcAK4LP6
tl9XW5InXMVcck9ssDKFpAfipMNNPNPeAHMONbIm6hyG5HkVjcS3JT1bZmkauxky
VIegPlAmorRCig5Hj2QfWEIOfvTUPdmm7WWh+SSZamY6cyvolWs1hV86Bg==
=333O
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Fix for compilation of selftests on non-x86 architectures
- Fix for kvm_run->if_flag on SEV-ES
- Fix for page table use-after-free if yielding during exit_mm()
- Improve behavior when userspace starts a nested guest with invalid
state
- Fix missed wakeup with assigned devices but no VT-d posted interrupts
- Do not tell userspace to save/restore an unsupported PMU MSR
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPU
KVM: selftests: Add test to verify TRIPLE_FAULT on invalid L2 guest state
KVM: VMX: Fix stale docs for kvm-intel.emulate_invalid_guest_state
KVM: nVMX: Synthesize TRIPLE_FAULT for L2 if emulation is required
KVM: VMX: Always clear vmx->fail on emulation_required
selftests: KVM: Fix non-x86 compiling
KVM: x86: Always set kvm_run->if_flag
KVM: x86/mmu: Don't advance iterator after restart due to yielding
KVM: x86: remove PMU FIXED_CTR3 from msrs_to_save_all
We have a general signal fuzzer, sigfuz, which can modify the MSR & NIP
before sigreturn. But the chance of it hitting a kernel address and also
clearing MSR_PR is fairly slim.
So add a specific test of sigreturn to a kernel address, both with and
without attempting to clear MSR_PR (which the kernel must block).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211209115944.4062384-1-mpe@ellerman.id.au
Migration of vmtest to libbpf/ci will change the address
of INDEX in vmtest.sh, which will cause vmtest.sh to not
work due to the failure of rootfs fetching.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Link: https://lore.kernel.org/bpf/20211220050803.2670677-1-pulehui@huawei.com
Add a selftest to attempt to enter L2 with invalid guests state by
exiting to userspace via I/O from L2, and then using KVM_SET_SREGS to set
invalid guest state (marking TR unusable is arbitrary chosen for its
relative simplicity).
This is a regression test for a bug introduced by commit c8607e4a08
("KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if
!from_vmentry"), which incorrectly set vmx->fail=true when L2 had invalid
guest state and ultimately triggered a WARN due to nested_vmx_vmexit()
seeing vmx->fail==true while attempting to synthesize a nested VM-Exit.
The is also a functional test to verify that KVM sythesizes TRIPLE_FAULT
for L2, which is somewhat arbitrary behavior, instead of emulating L2.
KVM should never emulate L2 due to invalid guest state, as it's
architecturally impossible for L1 to run an L2 guest with invalid state
as nested VM-Enter should always fail, i.e. L1 needs to do the emulation.
Stuffing state via KVM ioctl() is a non-architctural, out-of-band case,
hence the TRIPLE_FAULT being rather arbitrary.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211207193006.120997-5-seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Attempting to compile on a non-x86 architecture fails with
include/kvm_util.h: In function ‘vm_compute_max_gfn’:
include/kvm_util.h:79:21: error: dereferencing pointer to incomplete type ‘struct kvm_vm’
return ((1ULL << vm->pa_bits) >> vm->page_shift) - 1;
^~
This is because the declaration of struct kvm_vm is in
lib/kvm_util_internal.h as an effort to make it private to
the test lib code. We can still provide arch specific functions,
though, by making the generic function symbols weak. Do that to
fix the compile error.
Fixes: c8cc43c1ea ("selftests: KVM: avoid failures due to reserved HyperTransport region")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20211214151842.848314-1-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmG/fW8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOVBAf/dZDUEnrsu/o4xVPjPinMihtMstGk
RP7PqmJ+6nHeDsfoivIiigaFchpc0DYq2kU/8iOPkbsEnLyFuhKg1jUHMQiK5ZGY
shWvJq9HEwqAQ4v3H3PC5SomwlO4UmRkbrR4NT1SwFBSIk9s+soVbDZrdL8bJW7x
6XS01LsXeUPEcJj+h9bDGKmnibkiE4hsf9jGMgfiXgF33DB+LDNU9TH9MFn4K6J2
ColgIqZ+o5dXn7wMcsDsw+DTj81nki+gkghmW9k5rC5FA3qmKd3e5T2sgKey3Ztd
J+acNmGyG/hhYNE4RHXaN+ckNEcqywcCA31DfWq87aw6yP4pF2dKWu+BYw==
=yEYt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two small fixes, one of which was being worked around in selftests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Retry page fault if MMU reload is pending and root has no sp
KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDs
KVM: x86: Drop guest CPUID check for host initiated writes to MSR_IA32_PERF_CAPABILITIES
Host initiated writes to MSR_IA32_PERF_CAPABILITIES should not depend
on guest visible CPUIDs and (incorrect) KVM logic implementing it is
about to change. Also, KVM_SET_CPUID{,2} after KVM_RUN is now forbidden
and causes test to fail.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: feb627e8d6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211216165213.338923-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add selftest cases in action police with skip_hw.
Add selftest case to validate flags of filter and action.
These tests depend on corresponding iproute2 command support.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test verifies that a ksym of non-struct can not be directly
updated.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211217003152.48334-10-haoluo@google.com
The fixed commit attempts to get the output file descriptor even if the
file was never opened e.g.
$ perf record uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ]
$ perf inject -i perf.data --vm-time-correlation=dry-run
Segmentation fault (core dumped)
$ gdb --quiet perf
Reading symbols from perf...
(gdb) r inject -i perf.data --vm-time-correlation=dry-run
Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
__GI___fileno (fp=0x0) at fileno.c:35
35 fileno.c: No such file or directory.
(gdb) bt
#0 __GI___fileno (fp=0x0) at fileno.c:35
#1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72
#2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69
#3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017
#4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313
#5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365
#6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409
#7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539
(gdb)
Fixes: 0ae0389362 ("perf tools: Pass a fd to perf_file_header__read_pipe()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211213084829.114772-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fixed commit attempts to close inject.output even if it was never
opened e.g.
$ perf record uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ]
$ perf inject -i perf.data --vm-time-correlation=dry-run
Segmentation fault (core dumped)
$ gdb --quiet perf
Reading symbols from perf...
(gdb) r inject -i perf.data --vm-time-correlation=dry-run
Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48
48 iofclose.c: No such file or directory.
(gdb) bt
#0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48
#1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376
#2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085
#3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313
#4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365
#5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409
#6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539
(gdb)
Fixes: 02e6246f53 ("perf inject: Close inject.output on exit")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211213084829.114772-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hashmap__new() function may return ERR_PTR(-ENOMEM) when malloc()
fails, add IS_ERR() checking for ctx->ids.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211212062504.25841-1-linmq006@gmail.com
[ s/kfree()/free()/ and add missing linux/err.h include ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel will crash without
'mptcp: clear 'kern' flag from fallback sockets' change.
Since this doesn't slow down testing in a noticeable way,
run this unconditionally.
The explicit test did not catch this, because the check was done
for tcp socket returned by 'socket(.. IPPROTO_TCP) rather than a
tcp socket returned by accept() on a mptcp listen fd.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Synthesize instruction events for every ARM SPE record.
Arm SPE implements a hardware-based sample period, and perf implements a
software-based one. Add a warning message to inform the user of this.
Signed-off-by: German Gomez <german.gomez@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211216152404.52474-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reimplement bpf_probe_large_insn_limit() in bpftool, as that libbpf API
is scheduled for deprecation in v0.8.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211217171202.3352835-4-andrii@kernel.org
Add selftests for prog/map/prog+helper feature probing APIs. Prog and
map selftests are designed in such a way that they will always test all
the possible prog/map types, based on running kernel's vmlinux BTF enum
definition. This way we'll always be sure that when adding new BPF
program types or map types, libbpf will be always updated accordingly to
be able to feature-detect them.
BPF prog_helper selftest will have to be manually extended with
interesting and important prog+helper combinations, it's easy, but can't
be completely automated.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211217171202.3352835-3-andrii@kernel.org
Create three extensible alternatives to inconsistently named
feature-probing APIs:
- libbpf_probe_bpf_prog_type() instead of bpf_probe_prog_type();
- libbpf_probe_bpf_map_type() instead of bpf_probe_map_type();
- libbpf_probe_bpf_helper() instead of bpf_probe_helper().
Set up return values such that libbpf can report errors (e.g., if some
combination of input arguments isn't possible to validate, etc), in
addition to whether the feature is supported (return value 1) or not
supported (return value 0).
Also schedule deprecation of those three APIs. Also schedule deprecation
of bpf_probe_large_insn_limit().
Also fix all the existing detection logic for various program and map
types that never worked:
- BPF_PROG_TYPE_LIRC_MODE2;
- BPF_PROG_TYPE_TRACING;
- BPF_PROG_TYPE_LSM;
- BPF_PROG_TYPE_EXT;
- BPF_PROG_TYPE_SYSCALL;
- BPF_PROG_TYPE_STRUCT_OPS;
- BPF_MAP_TYPE_STRUCT_OPS;
- BPF_MAP_TYPE_BLOOM_FILTER.
Above prog/map types needed special setups and detection logic to work.
Subsequent patch adds selftests that will make sure that all the
detection logic keeps working for all current and future program and map
types, avoiding otherwise inevitable bit rot.
[0] Closes: https://github.com/libbpf/libbpf/issues/312
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Julia Kartseva <hex@fb.com>
Link: https://lore.kernel.org/bpf/20211217171202.3352835-2-andrii@kernel.org
The SGX selftest fails to build on tip/x86/sgx:
main.c: In function ‘get_total_epc_mem’:
main.c:296:17: error: implicit declaration of function ‘__cpuid’ [-Werror=implicit-function-declaration]
296 | __cpuid(&eax, &ebx, &ecx, &edx);
| ^~~~~~~
Include cpuid.h and use __cpuid_count() macro in order to fix the
compilation issue.
[ dhansen: tweak commit message ]
Fixes: f0ff2447b8 ("selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20211204202355.23005-1-jarkko@kernel.org
Cc: Shuah Khan <shuah@kernel.org>
Use '-o' within [] in order to avoid spawning two processes for test.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add a set of tests for the new gpio-sim module. This is a pure shell
test-suite and uses the helper programs available in the gpio selftests
directory. These test-cases only test the functionalities exposed by the
gpio-sim driver, not those handled by core gpiolib code.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Add a simple program that allows to read GPIO line names from the
character device. This will be used in gpio-sim selftests.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Add a simple program that allows to retrieve chip properties from the
GPIO character device. This will be used in gpio-sim selftests.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
- Fix printk() usage during recursion (Ard Biesheuvel)
- Fix rodata section to actually have contents (Christophe Leroy)
- Add notes about lkdtm_kernel_info usage (Kees Cook)
- Avoid stack-entropy selftest when LKDTM is disabled (Misono Tomohiro)
-----BEGIN PGP SIGNATURE-----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=JLZP
-----END PGP SIGNATURE-----
Merge tag 'lkdtm-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-next
Kees writes:
lkdtm updates for v5.17-rc1
- Fix printk() usage during recursion (Ard Biesheuvel)
- Fix rodata section to actually have contents (Christophe Leroy)
- Add notes about lkdtm_kernel_info usage (Kees Cook)
- Avoid stack-entropy selftest when LKDTM is disabled (Misono Tomohiro)
* tag 'lkdtm-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftest/lkdtm: Skip stack-entropy test if lkdtm is not available
lkdtm: Fix content of section containing lkdtm_rodata_do_nothing()
lkdtm: avoid printk() in recursive_loop()
lkdtm: Note that lkdtm_kernel_info should be removed in the future
Current release - regressions:
- dpaa2-eth: fix buffer overrun when reporting ethtool statistics
Current release - new code bugs:
- bpf: fix incorrect state pruning for <8B spill/fill
- iavf:
- add missing unlocks in iavf_watchdog_task()
- do not override the adapter state in the watchdog task (again)
- mlxsw: spectrum_router: consolidate MAC profiles when possible
Previous releases - regressions:
- mac80211, fix:
- rate control, avoid driver crash for retransmitted frames
- regression in SSN handling of addba tx
- a memory leak where sta_info is not freed
- marking TX-during-stop for TX in in_reconfig, prevent stall
- cfg80211: acquire wiphy mutex on regulatory work
- wifi drivers: fix build regressions and LED config dependency
- virtio_net: fix rx_drops stat for small pkts
- dsa: mv88e6xxx: unforce speed & duplex in mac_link_down()
Previous releases - always broken:
- bpf, fix:
- kernel address leakage in atomic fetch
- kernel address leakage in atomic cmpxchg's r0 aux reg
- signed bounds propagation after mov32
- extable fixup offset
- extable address check
- mac80211:
- fix the size used for building probe request
- send ADDBA requests using the tid/queue of the aggregation
session
- agg-tx: don't schedule_and_wake_txq() under sta->lock,
avoid deadlocks
- validate extended element ID is present
- mptcp:
- never allow the PM to close a listener subflow (null-defer)
- clear 'kern' flag from fallback sockets, prevent crash
- fix deadlock in __mptcp_push_pending()
- inet_diag: fix kernel-infoleak for UDP sockets
- xsk: do not sleep in poll() when need_wakeup set
- smc: avoid very long waits in smc_release()
- sch_ets: don't remove idle classes from the round-robin list
- netdevsim:
- zero-initialize memory for bpf map's value, prevent info leak
- don't let user space overwrite read only (max) ethtool parms
- ixgbe: set X550 MDIO speed before talking to PHY
- stmmac:
- fix null-deref in flower deletion w/ VLAN prio Rx steering
- dwmac-rk: fix oob read in rk_gmac_setup
- ice: time stamping fixes
- systemport: add global locking for descriptor life cycle
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=VIbd
-----END PGP SIGNATURE-----
Merge tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from mac80211, wifi, bpf.
Relatively large batches of fixes from BPF and the WiFi stack, calm in
general networking.
Current release - regressions:
- dpaa2-eth: fix buffer overrun when reporting ethtool statistics
Current release - new code bugs:
- bpf: fix incorrect state pruning for <8B spill/fill
- iavf:
- add missing unlocks in iavf_watchdog_task()
- do not override the adapter state in the watchdog task (again)
- mlxsw: spectrum_router: consolidate MAC profiles when possible
Previous releases - regressions:
- mac80211 fixes:
- rate control, avoid driver crash for retransmitted frames
- regression in SSN handling of addba tx
- a memory leak where sta_info is not freed
- marking TX-during-stop for TX in in_reconfig, prevent stall
- cfg80211: acquire wiphy mutex on regulatory work
- wifi drivers: fix build regressions and LED config dependency
- virtio_net: fix rx_drops stat for small pkts
- dsa: mv88e6xxx: unforce speed & duplex in mac_link_down()
Previous releases - always broken:
- bpf fixes:
- kernel address leakage in atomic fetch
- kernel address leakage in atomic cmpxchg's r0 aux reg
- signed bounds propagation after mov32
- extable fixup offset
- extable address check
- mac80211:
- fix the size used for building probe request
- send ADDBA requests using the tid/queue of the aggregation
session
- agg-tx: don't schedule_and_wake_txq() under sta->lock, avoid
deadlocks
- validate extended element ID is present
- mptcp:
- never allow the PM to close a listener subflow (null-defer)
- clear 'kern' flag from fallback sockets, prevent crash
- fix deadlock in __mptcp_push_pending()
- inet_diag: fix kernel-infoleak for UDP sockets
- xsk: do not sleep in poll() when need_wakeup set
- smc: avoid very long waits in smc_release()
- sch_ets: don't remove idle classes from the round-robin list
- netdevsim:
- zero-initialize memory for bpf map's value, prevent info leak
- don't let user space overwrite read only (max) ethtool parms
- ixgbe: set X550 MDIO speed before talking to PHY
- stmmac:
- fix null-deref in flower deletion w/ VLAN prio Rx steering
- dwmac-rk: fix oob read in rk_gmac_setup
- ice: time stamping fixes
- systemport: add global locking for descriptor life cycle"
* tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (89 commits)
bpf, selftests: Fix racing issue in btf_skc_cls_ingress test
selftest/bpf: Add a test that reads various addresses.
bpf: Fix extable address check.
bpf: Fix extable fixup offset.
bpf, selftests: Add test case trying to taint map value pointer
bpf: Make 32->64 bounds propagation slightly more robust
bpf: Fix signed bounds propagation after mov32
sit: do not call ipip6_dev_free() from sit_init_net()
net: systemport: Add global locking for descriptor lifecycle
net/smc: Prevent smc_release() from long blocking
net: Fix double 0x prefix print in SKB dump
virtio_net: fix rx_drops stat for small pkts
dsa: mv88e6xxx: fix debug print for SPEED_UNFORCED
sfc_ef100: potential dereference of null pointer
net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup
net: usb: lan78xx: add Allied Telesis AT29M2-AF
net/packet: rx_owner_map depends on pg_vec
netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc
dpaa2-eth: fix ethtool statistics
ixgbe: set X550 MDIO speed before talking to PHY
...
Daniel Borkmann says:
====================
pull-request: bpf 2021-12-16
We've added 15 non-merge commits during the last 7 day(s) which contain
a total of 12 files changed, 434 insertions(+), 30 deletions(-).
The main changes are:
1) Fix incorrect verifier state pruning behavior for <8B register spill/fill,
from Paul Chaignon.
2) Fix x86-64 JIT's extable handling for fentry/fexit when return pointer
is an ERR_PTR(), from Alexei Starovoitov.
3) Fix 3 different possibilities that BPF verifier missed where unprivileged
could leak kernel addresses, from Daniel Borkmann.
4) Fix xsk's poll behavior under need_wakeup flag, from Magnus Karlsson.
5) Fix an oob-write in test_verifier due to a missed MAX_NR_MAPS bump,
from Kumar Kartikeya Dwivedi.
6) Fix a race in test_btf_skc_cls_ingress selftest, from Martin KaFai Lau.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Fix racing issue in btf_skc_cls_ingress test
selftest/bpf: Add a test that reads various addresses.
bpf: Fix extable address check.
bpf: Fix extable fixup offset.
bpf, selftests: Add test case trying to taint map value pointer
bpf: Make 32->64 bounds propagation slightly more robust
bpf: Fix signed bounds propagation after mov32
bpf, selftests: Update test case for atomic cmpxchg on r0 with pointer
bpf: Fix kernel address leakage in atomic cmpxchg's r0 aux reg
bpf, selftests: Add test case for atomic fetch on spilled pointer
bpf: Fix kernel address leakage in atomic fetch
selftests/bpf: Fix OOB write in test_verifier
xsk: Do not sleep in poll() when need_wakeup set
selftests/bpf: Tests for state pruning with u32 spill/fill
bpf: Fix incorrect state pruning for <8B spill/fill
====================
Link: https://lore.kernel.org/r/20211216210005.13815-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The libbpf CI reported occasional failure in btf_skc_cls_ingress:
test_syncookie:FAIL:Unexpected syncookie states gen_cookie:80326634 recv_cookie:0
bpf prog error at line 97
"error at line 97" means the bpf prog cannot find the listening socket
when the final ack is received. It then skipped processing
the syncookie in the final ack which then led to "recv_cookie:0".
The problem is the userspace program did not do accept() and went
ahead to close(listen_fd) before the kernel (and the bpf prog) had
a chance to process the final ack.
The fix is to add accept() call so that the userspace will wait for
the kernel to finish processing the final ack first before close()-ing
everything.
Fixes: 9a856cae22 ("bpf: selftest: Add test_btf_skc_cls_ingress")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211216191630.466151-1-kafai@fb.com
Add a function to bpf_testmod that returns invalid kernel and user addresses.
Then attach an fexit program to that function that tries to read
memory through these addresses.
This logic checks that bpf_probe_read_kernel and BPF_PROBE_MEM logic is sane.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cross building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS. Clear CROSS_COMPILE for bpftool
and the host libbpf, and use the clang flags for urandom_read and bench.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-7-jean-philippe@linaro.org
Cross-building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS. Add them to CFLAGS, and erase
CROSS_COMPILE for the bpftool build, since it needs to be executed on
the host.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-6-jean-philippe@linaro.org
Cross-building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS, and adds that to CFLAGS. Remove
the cross flags for the bootstrap bpftool, and erase the CROSS_COMPILE
flag for the bootstrap libbpf.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-5-jean-philippe@linaro.org
Cross-building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS. Add them to the CFLAGS.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-4-jean-philippe@linaro.org
The CROSS_COMPILE variable may be present during resolve_btfids build if
the kernel is being cross-built. Since resolve_btfids is always executed
on the host, we set CC to HOSTCC in order to use the host toolchain when
cross-building with GCC. But instead of a toolchain prefix, cross-build
with clang uses a "-target" parameter, which Makefile.include deduces
from the CROSS_COMPILE variable. In order to avoid cross-building
libbpf, clear CROSS_COMPILE before building resolve_btfids.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-3-jean-philippe@linaro.org
Cross-compilation with clang uses the -target parameter rather than a
toolchain prefix. Just like the kernel Makefile, add that parameter to
CFLAGS when CROSS_COMPILE is set.
Unlike the kernel Makefile, we use the --sysroot and --gcc-toolchain
options because unlike the kernel, tools require standard libraries.
Commit c91d4e47e1 ("Makefile: Remove '--gcc-toolchain' flag") provides
some background about --gcc-toolchain. Normally clang finds on its own
the additional utilities and libraries that it needs (for example GNU ld
or glibc). On some systems however, this autodetection doesn't work.
There, our only recourse is asking GCC directly, and pass the result to
--sysroot and --gcc-toolchain. Of course that only works when a cross
GCC is available.
Autodetection worked fine on Debian, but to use the aarch64-linux-gnu
toolchain from Archlinux I needed both --sysroot (for crt1.o) and
--gcc-toolchain (for crtbegin.o, -lgcc). The --prefix parameter wasn't
needed there, but it might be useful on other distributions.
Use the CLANG_CROSS_FLAGS variable instead of CLANG_FLAGS because it
allows tools such as bpftool, that need to build both host and target
binaries, to easily filter out the cross-build flags from CFLAGS.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-2-jean-philippe@linaro.org
In Linux next commit 5504f67944 ("perf test sigtrap: Add basic
stress test for sigtrap handling") introduced the new test which uses
breakpoint events. These events are not supported on s390 and PowerPC
and always fail:
# perf test -F 73
73: Sigtrap : FAILED!
#
Fix it the same way as in the breakpoint tests in file
tests/bp_account.c where these type of tests are skipped on s390 and
PowerPC platforms.
With this patch skip this test on both platforms.
Output after:
# perf test -F 73
73: Sigtrap
#
Fixes: 5504f67944 ("perf test sigtrap: Add basic stress test for sigtrap handling")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20211216151454.752066-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The signal setup code and evlist__prepare_workload() can be used for
other subcommands. Let's move them out of the __cmd_ftrace(). Then
it doesn't need to pass argc and argv.
On the other hand, select_tracer() is specific to the 'trace'
subcommand so it'd better moving it into the __cmd_ftrace().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211215185154.360314-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The registers for ARM and ARM64 are enumerated using two enums that have
the same name. In order to be able to import both headers, the name of
one can be replaced using the C preprocessor like so:
#define perf_event_arm_regs perf_event_arm64_regs
#include <asm/perf_regs.h>
#undef perf_event_arm_regs
This patch updates all imports of ARM64's perf_regs.h in order to
prevent the naming collision.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20211207180653.1147374-3-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
