This commit adds an unstable kfunc helper to access internal xfrm_state
associated with an SA. This is intended to be used for the upcoming
IPsec pcpu work to assign special pcpu SAs to a particular CPU. In other
words: for custom software RSS.
That being said, the function that this kfunc wraps is fairly generic
and used for a lot of xfrm tasks. I'm sure people will find uses
elsewhere over time.
This commit also adds a corresponding bpf_xdp_xfrm_state_release() kfunc
to release the refcnt acquired by bpf_xdp_get_xfrm_state(). The verifier
will require that all acquired xfrm_state's are released.
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/a29699c42f5fad456b875c98dd11c6afc3ffb707.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use the correct verb form in 2 places in the XDP rx-queue comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/bpf/20231213043735.30208-1-rdunlap@infradead.org
Correct spelling and run-on sentences.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Link: https://msgid.link/20231213043558.10409-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To support multiple users referencing the same fragment,
'pp_frag_count' is renamed to 'pp_ref_count', transitioning pp pages
from fragment management to reference count management after draining
based on the suggestion from [1].
The idea is that the concept of fragmenting exists before the page is
drained, and all related functions retain their current names.
However, once the page is drained, its management shifts to being
governed by 'pp_ref_count'. Therefore, all functions associated with
that lifecycle stage of a pp page are renamed.
[1]
http://lore.kernel.org/netdev/f71d9448-70c8-8793-dc9a-0eb48a570300@huawei.com
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://lore.kernel.org/r/20231212044614.42733-2-liangchen.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcf_idr_insert_many will replace the allocated -EBUSY pointer in
tcf_idr_check_alloc with the real action pointer, exposing it
to all operations. This operation is only needed when the action pointer
is created (ACT_P_CREATED). For actions which are bound to (returned 0),
the pointer already resides in the idr making such operation a nop.
Even though it's a nop, it's still not a cheap operation as internally
the idr code walks the idr and then does a replace on the appropriate slot.
So if the action was bound, better skip the idr replace entirely.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20231211181807.96028-3-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I added logic to track the sock pair for stream_unix sockets so that we
ensure lifetime of the sock matches the time a sockmap could reference
the sock (see fixes tag). I forgot though that we allow af_unix unconnected
sockets into a sock{map|hash} map.
This is problematic because previous fixed expected sk_pair() to exist
and did not NULL check it. Because unconnected sockets have a NULL
sk_pair this resulted in the NULL ptr dereference found by syzkaller.
BUG: KASAN: null-ptr-deref in unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171
Write of size 4 at addr 0000000000000080 by task syz-executor360/5073
Call Trace:
<TASK>
...
sock_hold include/net/sock.h:777 [inline]
unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171
sock_map_init_proto net/core/sock_map.c:190 [inline]
sock_map_link+0xb87/0x1100 net/core/sock_map.c:294
sock_map_update_common+0xf6/0x870 net/core/sock_map.c:483
sock_map_update_elem_sys+0x5b6/0x640 net/core/sock_map.c:577
bpf_map_update_value+0x3af/0x820 kernel/bpf/syscall.c:167
We considered just checking for the null ptr and skipping taking a ref
on the NULL peer sock. But, if the socket is then connected() after
being added to the sockmap we can cause the original issue again. So
instead this patch blocks adding af_unix sockets that are not in the
ESTABLISHED state.
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+e8030702aefd3444fb9e@syzkaller.appspotmail.com
Fixes: 8866730aed ("bpf, sockmap: af_unix stream sockets need to hold ref for pair sock")
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231201180139.328529-2-john.fastabend@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Implement functionality that enables drivers to expose VLAN tag
to XDP code.
VLAN tag is represented by 2 variables:
- protocol ID, which is passed to bpf code in BE
- VLAN TCI, in host byte order
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20231205210847.28460-10-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 94ecc5ca4d ("xsk: Add cb area to struct xdp_buff_xsk") has added
a buffer for custom data to xdp_buff_xsk. Particularly, this memory is used
for data, consumed by XDP hints kfuncs. It does not always change on
a per-packet basis and some parts can be set for example, at the same time
as RX queue info.
Add functions to fill all cbs in xsk_buff_pool with the same metadata.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20231205210847.28460-8-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
RX hash XDP hint requests both hash value and type.
Type is XDP-specific, so we need a separate way to map
these values to the hardware ptypes, so create a lookup table.
Instead of creating a new long list, reuse contents
of ice_decode_rx_desc_ptype[] through preprocessor.
Current hash type enum does not contain ICMP packet type,
but ice devices support it, so also add a new type into core code.
Then use previously refactored code and create a function
that allows XDP code to read RX hash.
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20231205210847.28460-7-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Honestly, there's little value in having a helper with and without that
int __user *ufd argument. It's just messy and doesn't really give us
anything. Just expose receive_fd() with that argument and get rid of
that helper.
Link: https://lore.kernel.org/r/20231130-vfs-files-fixes-v1-5-e73ca6f4ea83@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Not every subsystem needs to have their own specialized helper.
Just us the __receive_fd() helper.
Link: https://lore.kernel.org/r/20231130-vfs-files-fixes-v1-4-e73ca6f4ea83@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
There may be cases where puncturing isn't possible, and
a connection needs to be downgraded. Add a hardware flag
to support this.
This is likely temporary: it seems we will need to move
puncturing to the chandef/channel context.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.c1e89ea55e93.I37b8ca0ee64d5d7699e351785a9010afc106da3c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for setting the TID to link mapping for a non-AP MLD
station.
This is useful in cases user space needs to restrict the possible
set of active links, e.g., since it got a BSS Transition Management
request forcing to use only a subset of the valid links etc.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.da4d56a5f3ff.Iacf88e943326bf9c169c49b728c4a3445fdedc97@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With the locking rework, more functions need to be called
with the wiphy mutex held. Document that, and for that use
the "Context" description that shows up more nicely in the
generated documentation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.24fa44c7eeb4.I8c9e030ddd78e07c99dd21fe1d5156555390f92e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sometimes there may be reasons for which a BSS that's
actually found in scan cannot be used to connect to,
for example a nonprimary link of an NSTR mobile AP MLD
cannot be used for normal direct connections to it.
Not indicating these to userspace as we do now of course
avoids being able to connect to them, but it's better if
they're shown to userspace and it can make an appropriate
decision, without e.g. doing an additional ML probe.
Thus add an indication of what a BSS can be used for,
currently "normal" and "MLD link", including a reason
bitmap for it being not usable.
The latter can be extended later for certain BSSes if there
are other reasons they cannot be used.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.0464f25e0b1d.I9f70ca9f1440565ad9a5207d0f4d00a20cca67e7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The newly added WBRF feature needs this interface for channel
width calculation.
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://msgid.link/20231211100630.2170152-4-Jun.Ma2@amd.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
32 bytes may be not enough for some custom metadata. Relax the restriction,
allow metadata larger than 32 bytes and make __skb_metadata_differs() work
with bigger lengths.
Now size of metadata is only limited by the fact it is stored as u8 in
skb_shared_info, so maximum possible value is 255. Size still has to be
aligned to 4, so the actual upper limit becomes 252. Most driver
implementations will offer less, none can offer more.
Other important conditions, such as having enough space for xdp_frame
building, are already checked in bpf_xdp_adjust_meta().
Signed-off-by: Aleksander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/eb87653c-8ff8-447d-a7a1-25961f60518a@kernel.org
Link: https://lore.kernel.org/bpf/20231206205919.404415-3-larysa.zaremba@intel.com
My prior patch went a bit too far, because apparently fib6_has_expires()
could be true while f6i->gc_link is not hashed yet.
fib6_set_expires_locked() can indeed set RTF_EXPIRES
while f6i->fib6_table is NULL.
Original syzbot reports were about corruptions caused
by dangling f6i->gc_link.
Fixes: 5a08d0065a ("ipv6: add debug checks in fib6_info_release()")
Reported-by: syzbot+c15aa445274af8674f41@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231207201322.549000-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The return value from nla_len() is never expected to be negative, and can
never be more than struct nlattr::nla_len (a u16). Adjust the prototype
on the function. This will let GCC's value range optimization passes
know that the return can never be negative, and can never be larger than
u16. As recently discussed[1], this silences the following warning in
GCC 12+:
net/wireless/nl80211.c: In function 'nl80211_set_cqm_rssi.isra':
net/wireless/nl80211.c:12892:17: warning: 'memcpy' specified bound 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=]
12892 | memcpy(cqm_config->rssi_thresholds, thresholds,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
12893 | flex_array_size(cqm_config, rssi_thresholds,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
12894 | n_thresholds));
| ~~~~~~~~~~~~~~
A future change would be to clamp the subtraction to make sure it never
wraps around if nla_len is somehow less than NLA_HDRLEN, which would
have the additional benefit of being defensive in the face of nlattr
corruption or logic errors.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311090752.hWcJWAHL-lkp@intel.com/ [1]
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Michael Walle <mwalle@kernel.org>
Cc: Max Schulze <max.schulze@online.de>
Link: https://lore.kernel.org/r/20231202202539.it.704-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231206205904.make.018-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 227b60f510 added a seqlock to ensure that the low and high
port numbers were always updated together.
This is overkill because the two 16bit port numbers can be held in
a u32 and read/written in a single instruction.
More recently 91d0b78c51 added support for finer per-socket limits.
The user-supplied value is 'high << 16 | low' but they are held
separately and the socket options protected by the socket lock.
Use a u32 containing 'high << 16 | low' for both the 'net' and 'sk'
fields and use READ_ONCE()/WRITE_ONCE() to ensure both values are
always updated together.
Change (the now trival) inet_get_local_port_range() to a static inline
to optimise the calling code.
(In particular avoiding returning integers by reference.)
Signed-off-by: David Laight <david.laight@aculab.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/4e505d4198e946a8be03fb1b4c3072b0@AcuMS.aculab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lorenzo points out that we effectively clear all unknown
flags from PIO when copying them to userspace in the netlink
RTM_NEWPREFIX notification.
We could fix this one at a time as new flags are defined,
or in one fell swoop - I choose the latter.
We could either define 6 new reserved flags (reserved1..6) and handle
them individually (and rename them as new flags are defined), or we
could simply copy the entire unmodified byte over - I choose the latter.
This unfortunately requires some anonymous union/struct magic,
so we add a static assert on the struct size for a little extra safety.
Cc: David Ahern <dsahern@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "NET_DM" generic netlink family notifies drop locations over the
"events" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.
Fix by adding a new field to the generic netlink multicast group
structure that when set prevents non-root users or root without the
'CAP_SYS_ADMIN' capability (in the user namespace owning the network
namespace) from joining the group. Set this field for the "events"
group. Use 'CAP_SYS_ADMIN' rather than 'CAP_NET_ADMIN' because of the
nature of the information that is shared over this group.
Note that the capability check in this case will always be performed
against the initial user namespace since the family is not netns aware
and only operates in the initial network namespace.
A new field is added to the structure rather than using the "flags"
field because the existing field uses uAPI flags and it is inappropriate
to add a new uAPI flag for an internal kernel check. In net-next we can
rework the "flags" field to use internal flags and fold the new field
into it. But for now, in order to reduce the amount of changes, add a
new field.
Since the information can only be consumed by root, mark the control
plane operations that start and stop the tracing as root-only using the
'GENL_ADMIN_PERM' flag.
Tested using [1].
Before:
# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
After:
# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
Failed to join "events" multicast group
[1]
$ cat dm.c
#include <stdio.h>
#include <netlink/genl/ctrl.h>
#include <netlink/genl/genl.h>
#include <netlink/socket.h>
int main(int argc, char **argv)
{
struct nl_sock *sk;
int grp, err;
sk = nl_socket_alloc();
if (!sk) {
fprintf(stderr, "Failed to allocate socket\n");
return -1;
}
err = genl_connect(sk);
if (err) {
fprintf(stderr, "Failed to connect socket\n");
return err;
}
grp = genl_ctrl_resolve_grp(sk, "NET_DM", "events");
if (grp < 0) {
fprintf(stderr,
"Failed to resolve \"events\" multicast group\n");
return grp;
}
err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
if (err) {
fprintf(stderr, "Failed to join \"events\" multicast group\n");
return err;
}
return 0;
}
$ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o dm_repo dm.c
Fixes: 9a8afc8d39 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently functions that pre-calculate TCP header options length use
unaligned TCP-AO header + MAC-length for skb reservation.
And the functions that actually write TCP-AO options into skb do align
the header. Nothing good can come out of this for ((maclen % 4) != 0).
Provide tcp_ao_len_aligned() helper and use it everywhere for TCP
header options space calculations.
Fixes: 1e03d32bea ("net/tcp: Add TCP-AO sign to outgoing packets")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit da37845fdc ("packet: uses kfree_skb() for errors.") switches
from consume_skb to kfree_skb to improve error handling. However, this
could bring a lot of noises when we monitor real packet drops in
kfree_skb[1], because in tpacket_rcv or packet_rcv only packet clones
can be freed, not actual packets.
Adding a generic drop reason to allow distinguish these "clone drops".
[1]: https://lore.kernel.org/netdev/CABWYdi00L+O30Q=Zah28QwZ_5RU-xcxLFUK2Zj08A8MrLk9jzg@mail.gmail.com/
Fixes: da37845fdc ("packet: uses kfree_skb() for errors.")
Suggested-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ZW4piNbx3IenYnuw@debian.debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the blamed commit below, if the user-space application performs
window clamping when tp->rcv_wnd is 0, the TCP socket will never be
able to announce a non 0 receive window, even after completely emptying
the receive buffer and re-setting the window clamp to higher values.
Refactor tcp_set_window_clamp() to address the issue: when the user
decreases the current clamp value, set rcv_ssthresh according to the
same logic used at buffer initialization, but ensuring reserved mem
provisioning.
To avoid code duplication factor-out the relevant bits from
tcp_adjust_rcv_ssthresh() in a new helper and reuse it in the above
scenario.
When increasing the clamp value, give the rcv_ssthresh a chance to grow
according to previously implemented heuristic.
Fixes: 3aa7857fe1 ("tcp: enable mid stream window clamp")
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/705dad54e6e6e9a010e571bf58e0b35a8ae70503.1701706073.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the napi pointer in netdev queue for tracking the napi
instance for each queue. This achieves the queue<->napi mapping.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://lore.kernel.org/r/170147331483.5260.15723438819994285695.stgit@anambiarhost.jf.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Walk the hashinfo->bhash2 table so that inet_diag can dump TCP sockets
that are bound but haven't yet called connect() or listen().
The code is inspired by the ->lhash2 loop. However there's no manual
test of the source port, since this kind of filtering is already
handled by inet_diag_bc_sk(). Also, a maximum of 16 sockets are dumped
at a time, to avoid running with bh disabled for too long.
There's no TCP state for bound but otherwise inactive sockets. Such
sockets normally map to TCP_CLOSE. However, "ss -l", which is supposed
to only dump listening sockets, actually requests the kernel to dump
sockets in either the TCP_LISTEN or TCP_CLOSE states. To avoid dumping
bound-only sockets with "ss -l", we therefore need to define a new
pseudo-state (TCP_BOUND_INACTIVE) that user space will be able to set
explicitly.
With an IPv4, an IPv6 and an IPv6-only socket, bound respectively to
40000, 64000, 60000, an updated version of iproute2 could work as
follow:
$ ss -t state bound-inactive
Recv-Q Send-Q Local Address:Port Peer Address:Port Process
0 0 0.0.0.0:40000 0.0.0.0:*
0 0 [::]:60000 [::]:*
0 0 *:64000 *:*
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/b3a84ae61e19c06806eea9c602b3b66e8f0cfc81.1701362867.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reorganize fast path variables on tx-txrx-rx order.
Fastpath cacheline ends after sysctl_tcp_rmem.
There are only read-only variables here. (write is on the control path
and not considered in this case)
Below data generated with pahole on x86 architecture.
Fast path variables span cache lines before change: 4
Fast path variables span cache lines after change: 2
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZWiCPAAKCRDbK58LschI
g4djAQC1FdqCRIFkhbiIRNHTgHjnfQShELQbd9ofJqzylLqmmgD+JI1E7D9SXagm
pIXQ26EGmq8/VcCT3VLncA8EsC76Gg4=
=Xowm
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-11-30
We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 58 files changed, 1598 insertions(+), 154 deletions(-).
The main changes are:
1) Add initial TX metadata implementation for AF_XDP with support in mlx5
and stmmac drivers. Two types of offloads are supported right now, that
is, TX timestamp and TX checksum offload, from Stanislav Fomichev with
stmmac implementation from Song Yoong Siang.
2) Change BPF verifier logic to validate global subprograms lazily instead
of unconditionally before the main program, so they can be guarded using
BPF CO-RE techniques, from Andrii Nakryiko.
3) Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter, from Jiri Olsa.
4) Use pkg-config in BPF selftests to determine ld flags which is
in particular needed for linking statically, from Akihiko Odaki.
5) Fix a few BPF selftest failures to adapt to the upcoming LLVM18,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (30 commits)
bpf/tests: Remove duplicate JSGT tests
selftests/bpf: Add TX side to xdp_hw_metadata
selftests/bpf: Convert xdp_hw_metadata to XDP_USE_NEED_WAKEUP
selftests/bpf: Add TX side to xdp_metadata
selftests/bpf: Add csum helpers
selftests/xsk: Support tx_metadata_len
xsk: Add option to calculate TX checksum in SW
xsk: Validate xsk_tx_metadata flags
xsk: Document tx_metadata_len layout
net: stmmac: Add Tx HWTS support to XDP ZC
net/mlx5e: Implement AF_XDP TX timestamp and checksum offload
tools: ynl: Print xsk-features from the sample
xsk: Add TX timestamp and TX checksum offload support
xsk: Support tx_metadata_len
selftests/bpf: Use pkg-config for libelf
selftests/bpf: Override PKG_CONFIG for static builds
selftests/bpf: Choose pkg-config for the target
bpftool: Add support to display uprobe_multi links
selftests/bpf: Add link_info test for uprobe_multi link
selftests/bpf: Use bpf_link__destroy in fill_link_info tests
...
====================
Conflicts:
Documentation/netlink/specs/netdev.yaml:
839ff60df3 ("net: page_pool: add nlspec for basic access to page pools")
48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
https://lore.kernel.org/all/20231201094705.1ee3cab8@canb.auug.org.au/
While at it also regen, tree is dirty after:
48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
looks like code wasn't re-rendered after "render-max" was removed.
Link: https://lore.kernel.org/r/20231130145708.32573-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will support arbitrary SYN Cookie with BPF, and then kfunc at
TC will preallocate reqsk and initialise some fields that should
not be overwritten later by cookie_v[46]_check().
To simplify the flow in cookie_v[46]_check(), we move such fields'
initialisation to cookie_tcp_reqsk_alloc() and factorise non-BPF
SYN Cookie handling into cookie_tcp_check(), where we validate the
cookie and allocate reqsk, as done by kfunc later.
Note that we set ireq->ecn_ok in two steps, the latter of which will
be shared by the BPF case. As cookie_ecn_ok() is one-liner, now
it's inlined.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We initialise treq->af_specific in cookie_tcp_reqsk_alloc() so that
we can look up a key later in tcp_create_openreq_child().
Initially, that change was added for MD5 by commit ba5a4fdd63 ("tcp:
make sure treq->af_specific is initialized"), but it has not been used
since commit d0f2b7a9ca ("tcp: Disable header prediction for MD5
flow.").
Now, treq->af_specific is used only by TCP-AO, so, we can move that
initialisation into tcp_ao_syncookie().
In addition to that, l3index in cookie_v[46]_check() is only used for
tcp_ao_syncookie(), so let's move it as well.
While at it, we move down tcp_ao_syncookie() in cookie_v4_check() so
that it will be called after security_inet_conn_request() to make
functions order consistent with cookie_v6_check().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we create a full socket from SYN Cookie, we initialise
tcp_sk(sk)->tsoffset redundantly in tcp_get_cookie_sock() as
the field is inherited from tcp_rsk(req)->ts_off.
cookie_v[46]_check
|- treq->ts_off = 0
`- tcp_get_cookie_sock
|- tcp_v[46]_syn_recv_sock
| `- tcp_create_openreq_child
| `- newtp->tsoffset = treq->ts_off
`- tcp_sk(child)->tsoffset = tsoff
Let's initialise tcp_rsk(req)->ts_off with the correct offset
and remove the second initialisation of tcp_sk(sk)->tsoffset.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_hdr(skb) and SYN Cookie are passed to __cookie_v[46]_check(), but
none of the callers passes cookie other than ntohl(th->ack_seq) - 1.
Let's fetch it in __cookie_v[46]_check() instead of passing the cookie
over and over.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a spelling mistake in struct field hc_tx_err_sqpdid_enforecement.
Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/20231128095304.515492-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- debugfs had a deadlock (removal vs. use of files),
fixes going through wireless ACKed by Greg
- support for HT STAs on 320 MHz channels, even if it's
not clear that should ever happen (that's 6 GHz), best
not to WARN()
- fix for the previous CQM fix that broke most cases
- various wiphy locking fixes
- various small driver fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmVnUrkACgkQ10qiO8sP
aACE4A/9EdhyexRlNKdF3yLh0Q4acuR8IlaLBNgGiQDFxx17djE04p2PTpwkxOyn
0EPy8dKhhWwoAkbvZ+6ToNFa+Jv9w+C5xVls2osGRuYGSVNlxCNy+8tWSNVT73jp
rrapEkYHzuz9wBZiJpKwC+mK9uH9gAQgWyYUaTTeOnO/+m3HVhZdU6y71j8gQlm6
9YFSI3r/VWlq1JpThn8WGULJXOMICWN0Sp4XRhEzHPLjK7MiCLNrrQSyV+uMHHUI
PmRQN8QW6Oomjbcih3YNn+Geps7xUJFEG4mZvM6GUBXugnIq9t9xmzEbEJyBRIpl
MGTwrIAyxtvBeHMpB7U/R3RSEyHfSW6fXHgN2S8ZEFTu6v70gP3TK8lL1gWc5mR4
GogNaGQ0G6LdiHjM7XeGUv/SfzD6HJWa9aR1JbRwapkvxFfM7BEc14gxip0nFDLG
z9sixiztGmzBsxmDc+h7M6YLlvWe4oqueUyjA7/p42NhYq41Zy/BYK5oUgsuL4ah
Lsb00O6Mz9m6iPtJlREe81Qsclkjg8xMY2YcCYELXP3v50KwU3THBAOYbh5hvgrL
T2gibkR0zFAGz1EDcPyQq/SBeUtASPVHyLGUMae6DOcVnOFdAhDTbX0B/TvcnRSq
e1gvmNywL7wFVZLD/RYZtWW9g6NUcwK+CU59PRBh2OqVb0ow8Ls=
=X6t2
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless fixes:
- debugfs had a deadlock (removal vs. use of files),
fixes going through wireless ACKed by Greg
- support for HT STAs on 320 MHz channels, even if it's
not clear that should ever happen (that's 6 GHz), best
not to WARN()
- fix for the previous CQM fix that broke most cases
- various wiphy locking fixes
- various small driver fixes
* tag 'wireless-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: use wiphy locked debugfs for sdata/link
wifi: mac80211: use wiphy locked debugfs helpers for agg_status
wifi: cfg80211: add locked debugfs wrappers
debugfs: add API to allow debugfs operations cancellation
debugfs: annotate debugfs handlers vs. removal with lockdep
debugfs: fix automount d_fsdata usage
wifi: mac80211: handle 320 MHz in ieee80211_ht_cap_ie_to_sta_ht_cap
wifi: avoid offset calculation on NULL pointer
wifi: cfg80211: hold wiphy mutex for send_interface
wifi: cfg80211: lock wiphy mutex for rfkill poll
wifi: cfg80211: fix CQM for non-range use
wifi: mac80211: do not pass AP_VLAN vif pointer to drivers during flush
wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta()
wifi: mt76: mt7925: fix typo in mt7925_init_he_caps
wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config
====================
Link: https://lore.kernel.org/r/20231129150809.31083-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZWfJyQAKCRDbK58LschI
g+AOAQCJhC0Tt+2db4H+xQVNaYiLouI7DZPOhNivvACmCyxoiwEA3EOeDmIYd5E3
BI702APCZ76pxt6Zg0bkcg9d7kLDaQk=
=zmzL
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-11-30
We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 10 files changed, 66 insertions(+), 15 deletions(-).
The main changes are:
1) Fix AF_UNIX splat from use after free in BPF sockmap,
from John Fastabend.
2) Fix a syzkaller splat in netdevsim by properly handling offloaded
programs (and not device-bound ones), from Stanislav Fomichev.
3) Fix bpf_mem_cache_alloc_flags() to initialize the allocation hint,
from Hou Tao.
4) Fix netkit by rejecting IFLA_NETKIT_PEER_INFO in changelink,
from Daniel Borkmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Add af_unix test with both sockets in map
bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
netkit: Reject IFLA_NETKIT_PEER_INFO in netkit_change_link
bpf: Add missed allocation hint for bpf_mem_cache_alloc_flags()
netdevsim: Don't accept device bound programs
====================
Link: https://lore.kernel.org/r/20231129234916.16128-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AF_UNIX stream sockets are a paired socket. So sending on one of the pairs
will lookup the paired socket as part of the send operation. It is possible
however to put just one of the pairs in a BPF map. This currently increments
the refcnt on the sock in the sockmap to ensure it is not free'd by the
stack before sockmap cleans up its state and stops any skbs being sent/recv'd
to that socket.
But we missed a case. If the peer socket is closed it will be free'd by the
stack. However, the paired socket can still be referenced from BPF sockmap
side because we hold a reference there. Then if we are sending traffic through
BPF sockmap to that socket it will try to dereference the free'd pair in its
send logic creating a use after free. And following splat:
[59.900375] BUG: KASAN: slab-use-after-free in sk_wake_async+0x31/0x1b0
[59.901211] Read of size 8 at addr ffff88811acbf060 by task kworker/1:2/954
[...]
[59.905468] Call Trace:
[59.905787] <TASK>
[59.906066] dump_stack_lvl+0x130/0x1d0
[59.908877] print_report+0x16f/0x740
[59.910629] kasan_report+0x118/0x160
[59.912576] sk_wake_async+0x31/0x1b0
[59.913554] sock_def_readable+0x156/0x2a0
[59.914060] unix_stream_sendmsg+0x3f9/0x12a0
[59.916398] sock_sendmsg+0x20e/0x250
[59.916854] skb_send_sock+0x236/0xac0
[59.920527] sk_psock_backlog+0x287/0xaa0
To fix let BPF sockmap hold a refcnt on both the socket in the sockmap and its
paired socket. It wasn't obvious how to contain the fix to bpf_unix logic. The
primarily problem with keeping this logic in bpf_unix was: In the sock close()
we could handle the deref by having a close handler. But, when we are destroying
the psock through a map delete operation we wouldn't have gotten any signal
thorugh the proto struct other than it being replaced. If we do the deref from
the proto replace its too early because we need to deref the sk_pair after the
backlog worker has been stopped.
Given all this it seems best to just cache it at the end of the psock and eat 8B
for the af_unix and vsock users. Notice dgram sockets are OK because they handle
locking already.
Fixes: 94531cfcbe ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20231129012557.95371-2-john.fastabend@gmail.com
For XDP_COPY mode, add a UMEM option XDP_UMEM_TX_SW_CSUM
to call skb_checksum_help in transmit path. Might be useful
to debugging issues with real hardware. I also use this mode
in the selftests.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231127190319.1190813-9-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Accept only the flags that the kernel knows about to make
sure we can extend this field in the future. Note that only
in XDP_COPY mode we propagate the error signal back to the user
(via sendmsg). For zerocopy mode we silently skip the metadata
for the descriptors that have wrong flags (since we process
the descriptors deep in the driver).
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231127190319.1190813-8-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This change actually defines the (initial) metadata layout
that should be used by AF_XDP userspace (xsk_tx_metadata).
The first field is flags which requests appropriate offloads,
followed by the offload-specific fields. The supported per-device
offloads are exported via netlink (new xsk-flags).
The offloads themselves are still implemented in a bit of a
framework-y fashion that's left from my initial kfunc attempt.
I'm introducing new xsk_tx_metadata_ops which drivers are
supposed to implement. The drivers are also supposed
to call xsk_tx_metadata_request/xsk_tx_metadata_complete in
the right places. Since xsk_tx_metadata_{request,_complete}
are static inline, we don't incur any extra overhead doing
indirect calls.
The benefit of this scheme is as follows:
- keeps all metadata layout parsing away from driver code
- makes it easy to grep and see which drivers implement what
- don't need any extra flags to maintain to keep track of what
offloads are implemented; if the callback is implemented - the offload
is supported (used by netlink reporting code)
Two offloads are defined right now:
1. XDP_TXMD_FLAGS_CHECKSUM: skb-style csum_start+csum_offset
2. XDP_TXMD_FLAGS_TIMESTAMP: writes TX timestamp back into metadata
area upon completion (tx_timestamp field)
XDP_TXMD_FLAGS_TIMESTAMP is also implemented for XDP_COPY mode: it writes
SW timestamp from the skb destructor (note I'm reusing hwtstamps to pass
metadata pointer).
The struct is forward-compatible and can be extended in the future
by appending more fields.
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231127190319.1190813-3-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For zerocopy mode, tx_desc->addr can point to an arbitrary offset
and carry some TX metadata in the headroom. For copy mode, there
is no way currently to populate skb metadata.
Introduce new tx_metadata_len umem config option that indicates how many
bytes to treat as metadata. Metadata bytes come prior to tx_desc address
(same as in RX case).
The size of the metadata has mostly the same constraints as XDP:
- less than 256 bytes
- 8-byte aligned (compared to 4-byte alignment on xdp, due to 8-byte
timestamp in the completion)
- non-zero
This data is not interpreted in any way right now.
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231127190319.1190813-2-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Report when page pool was destroyed. Together with the inflight
/ memory use reporting this can serve as a replacement for the
warning about leaked page pools we currently print to dmesg.
Example output for a fake leaked page pool using some hacks
in netdevsim (one "live" pool, and one "leaked" on the same dev):
$ ./cli.py --no-schema --spec netlink/specs/netdev.yaml \
--dump page-pool-get
[{'id': 2, 'ifindex': 3},
{'id': 1, 'ifindex': 3, 'destroyed': 133, 'inflight': 1}]
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To avoid any issues with race conditions on accessing napi
and having to think about the lifetime of NAPI objects
in netlink GET - stash the napi_id to which page pool
was linked at creation time.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link the page pools with netdevs. This needs to be netns compatible
so we have two options. Either we record the pools per netns and
have to worry about moving them as the netdev gets moved.
Or we record them directly on the netdev so they move with the netdev
without any extra work.
Implement the latter option. Since pools may outlast netdev we need
a place to store orphans. In time honored tradition use loopback
for this purpose.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To give ourselves the flexibility of creating netlink commands
and ability to refer to page pool instances in uAPIs create
IDs for page pools.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Previously, one-element and zero-length arrays were treated as true
flexible arrays, even though they are actually "fake" flex arrays.
The __randomize_layout would leave them untouched at the end of the
struct, similarly to proper C99 flex-array members.
However, this approach changed with commit 1ee60356c2 ("gcc-plugins:
randstruct: Only warn about true flexible arrays"). Now, only C99
flexible-array members will remain untouched at the end of the struct,
while one-element and zero-length arrays will be subject to randomization.
Fix a `__randomize_layout` crash in `struct neighbour` by transforming
zero-length array `primary_key` into a proper C99 flexible-array member.
Fixes: 1ee60356c2 ("gcc-plugins: randstruct: Only warn about true flexible arrays")
Closes: https://lore.kernel.org/linux-hardening/20231124102458.GB1503258@e124191.cambridge.arm.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/ZWJoRsJGnCPdJ3+2@work
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The first features pull request for v6.8. Not so big in number of
commits but we removed quite a few ancient drivers: libertas 16-bit
PCMCIA support, atmel, hostap, zd1201, orinoco, ray_cs, wl3501 and
rndis_wlan.
Major changes:
cfg80211/mac80211
* extend support for scanning while Multi-Link Operation (MLO) connected
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmVk2JkRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtD4gf7B8eR+lq6+5Qg7ObiURTci/WYlDo3prz4
R7hDmuHI5S3AJIRXF87fmC1iThIigi6dri1akRdRo3UvNr9gBTRpDGHnALuDPxOp
p8MpsG1gPNhMo0aNFfX5RDaGkfKqZQMT3er3ELG4B+k4q0glNWud07D2/0t1zSt9
rag3vlFVPRzcCz2T/Xv/nXXWaiIaQx0RLHrQshbxg0Glu+m/l3/ACBrirMiWami4
nr4SX717yckqwRElH0l5fSmCbylTDCTslo4UnpVKusxTtt1f3RxFZvsxvRgI5O9q
LEYsMtjNj2Ea3uLb0DvSNY640O/dqbRSm0PjwYxPwlmrtQB/6GMx8g==
=a+Xs
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The first features pull request for v6.8. Not so big in number of
commits but we removed quite a few ancient drivers: libertas 16-bit
PCMCIA support, atmel, hostap, zd1201, orinoco, ray_cs, wl3501 and
rndis_wlan.
Major changes:
cfg80211/mac80211
- extend support for scanning while Multi-Link Operation (MLO) connected
* tag 'wireless-next-2023-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (68 commits)
wifi: nl80211: Documentation update for NL80211_CMD_PORT_AUTHORIZED event
wifi: mac80211: Extend support for scanning while MLO connected
wifi: cfg80211: Extend support for scanning while MLO connected
wifi: ieee80211: fix PV1 frame control field name
rfkill: return ENOTTY on invalid ioctl
MAINTAINERS: update iwlwifi maintainers
wifi: rtw89: 8922a: read efuse content from physical map
wifi: rtw89: 8922a: read efuse content via efuse map struct from logic map
wifi: rtw89: 8852c: read RX gain offset from efuse for 6GHz channels
wifi: rtw89: mac: add to access efuse for WiFi 7 chips
wifi: rtw89: mac: use mac_gen pointer to access about efuse
wifi: rtw89: 8922a: add 8922A basic chip info
wifi: rtlwifi: drop unused const_amdpci_aspm
wifi: mwifiex: mwifiex_process_sleep_confirm_resp(): remove unused priv variable
wifi: rtw89: regd: update regulatory map to R65-R44
wifi: rtw89: regd: handle policy of 6 GHz according to BIOS
wifi: rtw89: acpi: process 6 GHz band policy from DSM
wifi: rtlwifi: simplify rtl_action_proc() and rtl_tx_agg_start()
wifi: rtw89: pci: update interrupt mitigation register for 8922AE
wifi: rtw89: pci: correct interrupt mitigation register for 8852CE
...
====================
Link: https://lore.kernel.org/r/20231127180056.0B48DC433C8@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend performance counter stats in 'ethtool -S <interface>'
for MANA VF to include all GDMA stat counter.
Tested-on: Ubuntu22
Testcases:
1. LISA testcase:
PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-Synthetic
2. LISA testcase:
PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-SRIOV
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/1700830950-803-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add wrappers for debugfs files that should be called with
the wiphy mutex held, while the file is also to be removed
under the wiphy mutex. This could otherwise deadlock when
a file is trying to acquire the wiphy mutex while the code
removing it holds the mutex but waits for the removal.
This actually works by pushing the execution of the read
or write handler to a wiphy work that can be cancelled
using the debugfs cancellation API.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To extend the support of TSF accounting in scan results for MLO
connections, allow to indicate in the scan request the link ID
corresponding to the BSS whose TSF should be used for the TSF
accounting.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231113112844.d4490bcdefb1.I8fcd158b810adddef4963727e9153096416b30ce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new sysctl: net.smc.smcr_max_conns_per_lgr, which is
used to control the preferred max connections per lgr for
SMC-R v2.1. The default value of this sysctl is 255, and
the acceptable value ranges from 16 to 255.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new sysctl: net.smc.smcr_max_links_per_lgr, which is
used to control the preferred max links per lgr for SMC-R
v2.1. The default value of this sysctl is 2, and the acceptable
value ranges from 1 to 2.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To fully benefit from previous commit add one byte of state
in the first cache line recording if we need to look at
the slow part.
The packing isn't all that impressive right now, we create
a 7B hole. I'm expecting Olek's rework will reshuffle this,
anyway.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://lore.kernel.org/r/20231121000048.789613-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct page_pool is rather performance critical and we use
16B of the first cache line to store 2 pointers used only
by test code. Future patches will add more informational
(non-fast path) attributes.
It's convenient for the user of the API to not have to worry
which fields are fast and which are slow path. Use struct
groups to split the params into the two categories internally.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20231121000048.789613-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ndo_get_peer_dev is used in tcx BPF fast path, therefore make use of
indirect call wrapper and therefore optimize the bpf_redirect_peer()
internal handling a bit. Add a small skb_get_peer_dev() wrapper which
utilizes the INDIRECT_CALL_1() macro instead of open coding.
Future work could potentially add a peer pointer directly into struct
net_device in future and convert veth and netkit over to use it so
that eventually ndo_get_peer_dev can be removed.
Co-developed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231114004220.6495-7-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Upon request, we must be able to provide to the user the list of
associations currently in place. Let's add a new netlink command and
attribute for this purpose.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-12-miquel.raynal@bootlin.com
Track the count of associated devices. Limit the number of associations
using the value provided by the user if any. If we reach the maximum
number of associations, we tell the device we are at capacity. If the
user do not want to accept any more associations, it may specify the
value 0 to the maximum number of associations, which will lead to an
access denied error status returned to the peers trying to associate.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-10-miquel.raynal@bootlin.com
Coordinators may refuse associations. We need a user input for
that. Let's add a new netlink command which can provide a maximum number
of devices we accept to associate with as a first step. Later, we could
also forward the request to userspace and check whether the association
should be accepted or not.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-9-miquel.raynal@bootlin.com
Coordinators may have to handle association requests from peers which
want to join the PAN. The logic involves:
- Acknowledging the request (done by hardware)
- If requested, a random short address that is free on this PAN should
be chosen for the device.
- Sending an association response with the short address allocated for
the peer and expecting it to be ack'ed.
If anything fails during this procedure, the peer is considered not
associated.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-8-miquel.raynal@bootlin.com
A device may decide at some point to disassociate from a PAN, let's
introduce a netlink command for this purpose.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-6-miquel.raynal@bootlin.com
Joining a PAN officially goes by associating with a coordinator. This
coordinator may have been discovered thanks to the beacons it sent in
the past. Add support to the MAC layer for these associations, which
require:
- Sending an association request
- Receiving an association response
The association response contains the association status, eventually a
reason if the association was unsuccessful, and finally a short address
that we should use for intra-PAN communication from now on, if we
required one (which is the default, and not yet configurable).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-5-miquel.raynal@bootlin.com
Users may decide to associate with a peer, which becomes our parent
coordinator. Let's add the necessary netlink support for this.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-4-miquel.raynal@bootlin.com
Introduce structures to describe peer devices in a PAN as well as a few
related helpers. We basically care about:
- Our unique parent after associating with a coordinator.
- Peer devices, children, which successfully associated with us.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-3-miquel.raynal@bootlin.com
if a PF has 256 or more VFs, ip link command will allocate an order 3
memory or more, and maybe trigger OOM due to memory fragment,
the VFs needed memory size is computed in rtnl_vfinfo_size.
so introduce nlmsg_new_large which calls netlink_alloc_large_skb in
which vmalloc is used for large memory, to avoid the failure of
allocating memory
ip invoked oom-killer: gfp_mask=0xc2cc0(GFP_KERNEL|__GFP_NOWARN|\
__GFP_COMP|__GFP_NOMEMALLOC), order=3, oom_score_adj=0
CPU: 74 PID: 204414 Comm: ip Kdump: loaded Tainted: P OE
Call Trace:
dump_stack+0x57/0x6a
dump_header+0x4a/0x210
oom_kill_process+0xe4/0x140
out_of_memory+0x3e8/0x790
__alloc_pages_slowpath.constprop.116+0x953/0xc50
__alloc_pages_nodemask+0x2af/0x310
kmalloc_large_node+0x38/0xf0
__kmalloc_node_track_caller+0x417/0x4d0
__kmalloc_reserve.isra.61+0x2e/0x80
__alloc_skb+0x82/0x1c0
rtnl_getlink+0x24f/0x370
rtnetlink_rcv_msg+0x12c/0x350
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1b2/0x280
netlink_sendmsg+0x355/0x4a0
sock_sendmsg+0x5b/0x60
____sys_sendmsg+0x1ea/0x250
___sys_sendmsg+0x88/0xd0
__sys_sendmsg+0x5e/0xa0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f95a65a5b70
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://lore.kernel.org/r/20231115120108.3711-1-lirongqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lwne
-----END PGP SIGNATURE-----
Merge tag 'nf-23-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Remove unused variable causing compilation warning in nft_set_rbtree,
from Yang Li. This unused variable is a left over from previous
merge window.
2) Possible return of uninitialized in nf_conntrack_bridge, from
Linkui Xiao. This is there since nf_conntrack_bridge is available.
3) Fix incorrect pointer math in nft_byteorder, from Dan Carpenter.
Problem has been there since 2016.
4) Fix bogus error in destroy set element command. Problem is there
since this new destroy command was added.
5) Fix race condition in ipset between swap and destroy commands and
add/del/test control plane. This problem is there since ipset was
merged.
6) Split async and sync catchall GC in two function to fix unsafe
iteration over RCU. This is a fix-for-fix that was included in
the previous pull request.
* tag 'nf-23-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: split async and sync catchall in two functions
netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test
netfilter: nf_tables: bogus ENOENT when destroying element which does not exist
netfilter: nf_tables: fix pointer math issue in nft_byteorder_eval()
netfilter: nf_conntrack_bridge: initialize err to 0
netfilter: nft_set_rbtree: Remove unused variable nft_net
====================
Link: https://lore.kernel.org/r/20231115184514.8965-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is no hardware supporting ct helper offload. However, prior to this
patch, a flower filter with a helper in the ct action can be successfully
set into the HW, for example (eth1 is a bnxt NIC):
# tc qdisc add dev eth1 ingress_block 22 ingress
# tc filter add block 22 proto ip flower skip_sw ip_proto tcp \
dst_port 21 ct_state -trk action ct helper ipv4-tcp-ftp
# tc filter show dev eth1 ingress
filter block 22 protocol ip pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto tcp
dst_port 21
ct_state -trk
skip_sw
in_hw in_hw_count 1 <----
action order 1: ct zone 0 helper ipv4-tcp-ftp pipe
index 2 ref 1 bind 1
used_hw_stats delayed
This might cause the flower filter not to work as expected in the HW.
This patch avoids this problem by simply returning -EOPNOTSUPP in
tcf_ct_offload_act_setup() to not allow to offload flows with a helper
in act_ct.
Fixes: a21b06e731 ("net: sched: add helper support in act_ct")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/f8685ec7702c4a448a1371a8b34b43217b583b9d.1699898008.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The problem is in nft_byteorder_eval() where we are iterating through a
loop and writing to dst[0], dst[1], dst[2] and so on... On each
iteration we are writing 8 bytes. But dst[] is an array of u32 so each
element only has space for 4 bytes. That means that every iteration
overwrites part of the previous element.
I spotted this bug while reviewing commit caf3ef7468 ("netfilter:
nf_tables: prevent OOB access in nft_byteorder_eval") which is a related
issue. I think that the reason we have not detected this bug in testing
is that most of time we only write one element.
Fixes: ce1e7989d9 ("netfilter: nft_byteorder: provide 64bit le/be conversion")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Referenced commit doesn't always set iifidx when offloading the flow to
hardware. Fix the following cases:
- nf_conn_act_ct_ext_fill() is called before extension is created with
nf_conn_act_ct_ext_add() in tcf_ct_act(). This can cause rule offload with
unspecified iifidx when connection is offloaded after only single
original-direction packet has been processed by tc data path. Always fill
the new nf_conn_act_ct_ext instance after creating it in
nf_conn_act_ct_ext_add().
- Offloading of unidirectional UDP NEW connections is now supported, but ct
flow iifidx field is not updated when connection is promoted to
bidirectional which can result reply-direction iifidx to be zero when
refreshing the connection. Fill in the extension and update flow iifidx
before calling flow_offload_refresh().
Fixes: 9795ded7f9 ("net/sched: act_ct: Fill offloading tuple iifidx")
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 6a9bad0069 ("net/sched: act_ct: offload UDP NEW connections")
Link: https://lore.kernel.org/r/20231103151410.764271-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I am looking at syzbot reports triggering kernel stack overflows
involving a cascade of ipvlan devices.
We can save 8 bytes in struct flowi_common.
This patch alone will not fix the issue, but is a start.
Fixes: 24ba14406c ("route: Add multipath_hash in flowi_common to make user-define hash")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: wenxu <wenxu@ucloud.cn>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231025141037.3448203-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- Support GRO decapsulation for IPsec ESP in UDP.
- Add a handful of MODULE_DESCRIPTION()s.
- Drop questionable alignment check in TCP AO to avoid
build issue after changes in the crypto tree.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=fqHj
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.7-followup' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull more networking updates from Jakub Kicinski:
- Support GRO decapsulation for IPsec ESP in UDP
- Add a handful of MODULE_DESCRIPTION()s
- Drop questionable alignment check in TCP AO to avoid
build issue after changes in the crypto tree
* tag 'net-next-6.7-followup' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next:
net: tcp: remove call to obsolete crypto_ahash_alignmask()
net: fill in MODULE_DESCRIPTION()s under drivers/net/
net: fill in MODULE_DESCRIPTION()s under net/802*
net: fill in MODULE_DESCRIPTION()s under net/core
net: fill in MODULE_DESCRIPTION()s in kuba@'s modules
xfrm: policy: fix layer 4 flowi decoding
xfrm Fix use after free in __xfrm6_udp_encap_rcv.
xfrm: policy: replace session decode with flow dissector
xfrm: move mark and oif flowi decode into common code
xfrm: pass struct net to xfrm_decode_session wrappers
xfrm: Support GRO for IPv6 ESP in UDP encapsulation
xfrm: Support GRO for IPv4 ESP in UDP encapsulation
xfrm: Use the XFRM_GRO to indicate a GRO call on input
xfrm: Annotate struct xfrm_sec_ctx with __counted_by
xfrm: Remove unused function declarations
-----BEGIN PGP SIGNATURE-----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=sk8+
-----END PGP SIGNATURE-----
Merge tag 'for-6.7/io_uring-sockopt-2023-10-30' of git://git.kernel.dk/linux
Pull io_uring {get,set}sockopt support from Jens Axboe:
"This adds support for using getsockopt and setsockopt via io_uring.
The main use cases for this is to enable use of direct descriptors,
rather than first instantiating a normal file descriptor, doing the
option tweaking needed, then turning it into a direct descriptor. With
this support, we can avoid needing a regular file descriptor
completely.
The net and bpf bits have been signed off on their side"
* tag 'for-6.7/io_uring-sockopt-2023-10-30' of git://git.kernel.dk/linux:
selftests/bpf/sockopt: Add io_uring support
io_uring/cmd: Introduce SOCKET_URING_OP_SETSOCKOPT
io_uring/cmd: Introduce SOCKET_URING_OP_GETSOCKOPT
io_uring/cmd: return -EOPNOTSUPP if net is disabled
selftests/net: Extract uring helpers to be reusable
tools headers: Grab copy of io_uring.h
io_uring/cmd: Pass compat mode in issue_flags
net/socket: Break down __sys_getsockopt
net/socket: Break down __sys_setsockopt
bpf: Add sockptr support for setsockopt
bpf: Add sockptr support for getsockopt
-----BEGIN PGP SIGNATURE-----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=slHB
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2023-10-28
1) Remove unused function declarations of xfrm4_extract_input and
xfrm6_extract_input. From Yue Haibing.
2) Annotate struct xfrm_sec_ctx with __counted_by.
From Kees Cook.
3) Support GRO decapsulation for ESP in UDP encapsulation.
From Antony Antony et all.
4) Replace the xfrm session decode with flow dissector.
From Florian Westphal.
5) Fix a use after free in __xfrm6_udp_encap_rcv.
6) Fix the layer 4 flowi decoding.
From Florian Westphal.
* tag 'ipsec-next-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: policy: fix layer 4 flowi decoding
xfrm Fix use after free in __xfrm6_udp_encap_rcv.
xfrm: policy: replace session decode with flow dissector
xfrm: move mark and oif flowi decode into common code
xfrm: pass struct net to xfrm_decode_session wrappers
xfrm: Support GRO for IPv6 ESP in UDP encapsulation
xfrm: Support GRO for IPv4 ESP in UDP encapsulation
xfrm: Use the XFRM_GRO to indicate a GRO call on input
xfrm: Annotate struct xfrm_sec_ctx with __counted_by
xfrm: Remove unused function declarations
====================
Link: https://lore.kernel.org/r/20231028084328.3119236-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add TCP_AO_REPAIR setsockopt(), getsockopt(). They let a user to repair
TCP-AO ISNs/SNEs. Also let the user hack around when (tp->repair) is on
and add ao_info on a socket in any supported state.
As SNEs now can be read/written at any moment, use
WRITE_ONCE()/READ_ONCE() to set/read them.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly how TCP_MD5SIG_FLAG_IFINDEX works for TCP-MD5,
TCP_AO_KEYF_IFINDEX is an AO-key flag that binds that MKT to a specified
by L3 ifinndex. Similarly, without this flag the key will work in
the default VRF l3index = 0 for connections.
To prevent AO-keys from overlapping, it's restricted to add key B for a
socket that has key A, which have the same sndid/rcvid and one of
the following is true:
- !(A.keyflags & TCP_AO_KEYF_IFINDEX) or !(B.keyflags & TCP_AO_KEYF_IFINDEX)
so that any key is non-bound to a VRF
- A.l3index == B.l3index
both want to work for the same VRF
Additionally, it's restricted to match TCP-MD5 keys for the same peer
the following way:
|--------------|--------------------|----------------|---------------|
| | MD5 key without | MD5 key | MD5 key |
| | l3index | l3index=0 | l3index=N |
|--------------|--------------------|----------------|---------------|
| TCP-AO key | | | |
| without | reject | reject | reject |
| l3index | | | |
|--------------|--------------------|----------------|---------------|
| TCP-AO key | | | |
| l3index=0 | reject | reject | allow |
|--------------|--------------------|----------------|---------------|
| TCP-AO key | | | |
| l3index=N | reject | allow | reject |
|--------------|--------------------|----------------|---------------|
This is done with the help of tcp_md5_do_lookup_any_l3index() to reject
adding AO key without TCP_AO_KEYF_IFINDEX if there's TCP-MD5 in any VRF.
This is important for case where sysctl_tcp_l3mdev_accept = 1
Similarly, for TCP-AO lookups tcp_ao_do_lookup() may be used with
l3index < 0, so that __tcp_ao_key_cmp() will match TCP-AO key in any VRF.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to TCP-MD5, add a static key to TCP-AO that is patched out
when there are no keys on a machine and dynamically enabled with the
first setsockopt(TCP_AO) adds a key on any socket. The static key is as
well dynamically disabled later when the socket is destructed.
The lifetime of enabled static key here is the same as ao_info: it is
enabled on allocation, passed over from full socket to twsk and
destructed when ao_info is scheduled for destruction.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce getsockopt(TCP_AO_GET_KEYS) that lets a user get TCP-AO keys
and their properties from a socket. The user can provide a filter
to match the specific key to be dumped or ::get_all = 1 may be
used to dump all keys in one syscall.
Add another getsockopt(TCP_AO_INFO) for providing per-socket/per-ao_info
stats: packet counters, Current_key/RNext_key and flags like
::ao_required and ::accept_icmps.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to IPsec, RFC5925 prescribes:
">> A TCP-AO implementation MUST default to ignore incoming ICMPv4
messages of Type 3 (destination unreachable), Codes 2-4 (protocol
unreachable, port unreachable, and fragmentation needed -- ’hard
errors’), and ICMPv6 Type 1 (destination unreachable), Code 1
(administratively prohibited) and Code 4 (port unreachable) intended
for connections in synchronized states (ESTABLISHED, FIN-WAIT-1, FIN-
WAIT-2, CLOSE-WAIT, CLOSING, LAST-ACK, TIME-WAIT) that match MKTs."
A selftest (later in patch series) verifies that this attack is not
possible in this TCP-AO implementation.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper for logging connection-detailed messages for failed TCP
hash verification (both MD5 and AO).
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add Sequence Number Extension (SNE) for TCP-AO.
This is needed to protect long-living TCP-AO connections from replaying
attacks after sequence number roll-over, see RFC5925 (6.2).
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce segment counters that are useful for troubleshooting/debugging
as well as for writing tests.
Now there are global snmp counters as well as per-socket and per-key.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now there is a common function to verify signature on TCP segments:
tcp_inbound_hash(). It has checks for all possible cross-interactions
with MD5 signs as well as with unsigned segments.
The rules from RFC5925 are:
(1) Any TCP segment can have at max only one signature.
(2) TCP connections can't switch between using TCP-MD5 and TCP-AO.
(3) TCP-AO connections can't stop using AO, as well as unsigned
connections can't suddenly start using AO.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to RST segments, wire SYN-ACKs to TCP-AO.
tcp_rsk_used_ao() is handy here to check if the request socket used AO
and needs a signature on the outgoing segments.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now when the new request socket is created from the listening socket,
it's recorded what MKT was used by the peer. tcp_rsk_used_ao() is
a new helper for checking if TCP-AO option was used to create the
request socket.
tcp_ao_copy_all_matching() will copy all keys that match the peer on the
request socket, as well as preparing them for the usage (creating
traffic keys).
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for sockets in time-wait state.
ao_info as well as all keys are inherited on transition to time-wait
socket. The lifetime of ao_info is now protected by ref counter, so
that tcp_ao_destroy_sock() will destruct it only when the last user is
gone.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wire up sending resets to TCP-AO hashing.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a helper that:
(1) shares the common code with TCP-MD5 header options parsing
(2) looks for hash signature only once for both TCP-MD5 and TCP-AO
(3) fails with -EEXIST if any TCP sign option is present twice, see
RFC5925 (2.2):
">> A single TCP segment MUST NOT have more than one TCP-AO in its
options sequence. When multiple TCP-AOs appear, TCP MUST discard
the segment."
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using precalculated traffic keys, sign TCP segments as prescribed by
RFC5925. Per RFC, TCP header options are included in sign calculation:
"The TCP header, by default including options, and where the TCP
checksum and TCP-AO MAC fields are set to zero, all in network-
byte order." (5.1.3)
tcp_ao_hash_header() has exclude_options parameter to optionally exclude
TCP header from hash calculation, as described in RFC5925 (9.1), this is
needed for interaction with middleboxes that may change "some TCP
options". This is wired up to AO key flags and setsockopt() later.
Similarly to TCP-MD5 hash TCP segment fragments.
From this moment a user can start sending TCP-AO signed segments with
one of crypto ahash algorithms from supported by Linux kernel. It can
have a user-specified MAC length, to either save TCP option header space
or provide higher protection using a longer signature.
The inbound segments are not yet verified, TCP-AO option is ignored and
they are accepted.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add traffic key calculation the way it's described in RFC5926.
Wire it up to tcp_finish_connect() and cache the new keys straight away
on already established TCP connections.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be as conservative as possible: if there is TCP-MD5 key for a given peer
regardless of L3 interface - don't allow setting TCP-AO key for the same
peer. According to RFC5925, TCP-AO is supposed to replace TCP-MD5 and
there can't be any switch between both on any connected tuple.
Later it can be relaxed, if there's a use, but in the beginning restrict
any intersection.
Note: it's still should be possible to set both TCP-MD5 and TCP-AO keys
on a listening socket for *different* peers.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add 3 setsockopt()s:
1. TCP_AO_ADD_KEY to add a new Master Key Tuple (MKT) on a socket
2. TCP_AO_DEL_KEY to delete present MKT from a socket
3. TCP_AO_INFO to change flags, Current_key/RNext_key on a TCP-AO sk
Userspace has to introduce keys on every socket it wants to use TCP-AO
option on, similarly to TCP_MD5SIG/TCP_MD5SIG_EXT.
RFC5925 prohibits definition of MKTs that would match the same peer,
so do sanity checks on the data provided by userspace. Be as
conservative as possible, including refusal of defining MKT on
an established connection with no AO, removing the key in-use and etc.
(1) and (2) are to be used by userspace key manager to add/remove keys.
(3) main purpose is to set RNext_key, which (as prescribed by RFC5925)
is the KeyID that will be requested in TCP-AO header from the peer to
sign their segments with.
At this moment the life of ao_info ends in tcp_v4_destroy_sock().
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce new kernel config option and common structures as well as
helpers to be used by TCP-AO code.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path,
which is setsockopt() and use crypto ahash requests on fast paths,
which are RX/TX softirqs. Also, it needs a temporary/scratch buffer
for preparing the hash.
Rework tcp_md5sig_pool in order to support other hashing algorithms
than MD5. It will make it possible to share pre-allocated crypto_ahash
descriptors and scratch area between all TCP hash users.
Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated
crypto ahash tfm. Kudos to Herbert, who provided this new crypto API.
I was a little concerned over GFP_ATOMIC allocations of ahash and
crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both
"backends" with different algorithms, using patched version of iperf3[2].
On my laptop with i7-7600U @ 2.80GHz:
clone-tfm per-CPU-requests
TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec
TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec
TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec
TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec
TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec
TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec
TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec
TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec
TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec
So, it seems that my concerns don't have strong grounds and per-CPU
crypto_request allocation can be dropped/removed from tcp_sigpool once
ciphers get crypto_clone_ahash() support.
[1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u
[2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The third, and most likely the last, features pull request for v6.7.
Fixes all over and only few small new features.
Major changes:
iwlwifi
* more Multi-Link Operation (MLO) work
ath12k
* QCN9274: mesh support
ath11k
* firmware-2.bin container file format support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmU6KqgRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtyMwf7B/BqV0LCNzBxtrWl3WYtgQgULgWFmEJt
83/Vo8pXelZzzMMERwvZtPCwEUm/L/vOO/a/k0oSz/XQbt4PTIBGnWA7JwYZGY++
1Kc79oMyXxG4Q4RCnKG/qQMzCnyL54RHUfFQrNaa3Bkgp7vGobU+ixH4NaqHI3M9
OFmyhCklk9AO0VTtT6vQQBM6wM3UC1adneZMVlb8xD2Wi5rkrRk4PX5msgaYrStR
ketZE6IPnnX8DziqGZPlTz1SSuOSnwGTOramdeGLKIUUlZbPWHTSBZ8lh/xnvGUB
561mp3/iguFtq2NvduPBqItotBzLGvnJZbLDrBPxB/v99q+7/cziSA==
=Xf7b
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.7
The third, and most likely the last, features pull request for v6.7.
Fixes all over and only few small new features.
Major changes:
iwlwifi
- more Multi-Link Operation (MLO) work
ath12k
- QCN9274: mesh support
ath11k
- firmware-2.bin container file format support
* tag 'wireless-next-2023-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (155 commits)
wifi: ray_cs: Remove unnecessary (void*) conversions
Revert "wifi: ath11k: call ath11k_mac_fils_discovery() without condition"
wifi: ath12k: Introduce and use ath12k_sta_to_arsta()
wifi: ath12k: fix htt mlo-offset event locking
wifi: ath12k: fix dfs-radar and temperature event locking
wifi: ath11k: fix gtk offload status event locking
wifi: ath11k: fix htt pktlog locking
wifi: ath11k: fix dfs radar event locking
wifi: ath11k: fix temperature event locking
wifi: ath12k: rename the sc naming convention to ab
wifi: ath12k: rename the wmi_sc naming convention to wmi_ab
wifi: ath11k: add firmware-2.bin support
wifi: ath11k: qmi: refactor ath11k_qmi_m3_load()
wifi: rtw89: cleanup firmware elements parsing
wifi: rt2x00: rework MT7620 PA/LNA RF calibration
wifi: rt2x00: rework MT7620 channel config function
wifi: rt2x00: improve MT7620 register initialization
MAINTAINERS: wifi: rt2x00: drop Helmut Schaa
wifi: wlcore: main: replace deprecated strncpy with strscpy
wifi: wlcore: boot: replace deprecated strncpy with strscpy
...
====================
Link: https://lore.kernel.org/r/20231026090411.B2426C433CB@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZTp12QAKCRDbK58LschI
g8BrAQDifqp5liEEdXV8jdReBwJtqInjrL5tzy5LcyHUMQbTaAEA6Ph3Ct3B+3oA
mFnIW/y6UJiJrby0Xz4+vV5BXI/5WQg=
=pLCV
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-26
We've added 51 non-merge commits during the last 10 day(s) which contain
a total of 75 files changed, 5037 insertions(+), 200 deletions(-).
The main changes are:
1) Add open-coded task, css_task and css iterator support.
One of the use cases is customizable OOM victim selection via BPF,
from Chuyi Zhou.
2) Fix BPF verifier's iterator convergence logic to use exact states
comparison for convergence checks, from Eduard Zingerman,
Andrii Nakryiko and Alexei Starovoitov.
3) Add BPF programmable net device where bpf_mprog defines the logic
of its xmit routine. It can operate in L3 and L2 mode,
from Daniel Borkmann and Nikolay Aleksandrov.
4) Batch of fixes for BPF per-CPU kptr and re-enable unit_size checking
for global per-CPU allocator, from Hou Tao.
5) Fix libbpf which eagerly assumed that SHT_GNU_verdef ELF section
was going to be present whenever a binary has SHT_GNU_versym section,
from Andrii Nakryiko.
6) Fix BPF ringbuf correctness to fold smp_mb__before_atomic() into
atomic_set_release(), from Paul E. McKenney.
7) Add a warning if NAPI callback missed xdp_do_flush() under
CONFIG_DEBUG_NET which helps checking if drivers were missing
the former, from Sebastian Andrzej Siewior.
8) Fix missed RCU read-lock in bpf_task_under_cgroup() which was throwing
a warning under sleepable programs, from Yafang Shao.
9) Avoid unnecessary -EBUSY from htab_lock_bucket by disabling IRQ before
checking map_locked, from Song Liu.
10) Make BPF CI linked_list failure test more robust,
from Kumar Kartikeya Dwivedi.
11) Enable samples/bpf to be built as PIE in Fedora, from Viktor Malik.
12) Fix xsk starving when multiple xsk sockets were associated with
a single xsk_buff_pool, from Albert Huang.
13) Clarify the signed modulo implementation for the BPF ISA standardization
document that it uses truncated division, from Dave Thaler.
14) Improve BPF verifier's JEQ/JNE branch taken logic to also consider
signed bounds knowledge, from Andrii Nakryiko.
15) Add an option to XDP selftests to use multi-buffer AF_XDP
xdp_hw_metadata and mark used XDP programs as capable to use frags,
from Larysa Zaremba.
16) Fix bpftool's BTF dumper wrt printing a pointer value and another
one to fix struct_ops dump in an array, from Manu Bretelle.
* tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (51 commits)
netkit: Remove explicit active/peer ptr initialization
selftests/bpf: Fix selftests broken by mitigations=off
samples/bpf: Allow building with custom bpftool
samples/bpf: Fix passing LDFLAGS to libbpf
samples/bpf: Allow building with custom CFLAGS/LDFLAGS
bpf: Add more WARN_ON_ONCE checks for mismatched alloc and free
selftests/bpf: Add selftests for netkit
selftests/bpf: Add netlink helper library
bpftool: Extend net dump with netkit progs
bpftool: Implement link show support for netkit
libbpf: Add link-based API for netkit
tools: Sync if_link uapi header
netkit, bpf: Add bpf programmable net device
bpf: Improve JEQ/JNE branch taken logic
bpf: Fold smp_mb__before_atomic() into atomic_set_release()
bpf: Fix unnecessary -EBUSY from htab_lock_bucket
xsk: Avoid starving the xsk further down the list
bpf: print full verifier states on infinite loop detection
selftests/bpf: test if state loops are detected in a tricky case
bpf: correct loop detection for iterators convergence
...
====================
Link: https://lore.kernel.org/r/20231026150509.2824-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct nla_policy is usually constant itself, but unless
we make the ranges inside constant we won't be able to
make range structs const. The ranges are not modified
by the core.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231025162204.132528-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZG+P
-----END PGP SIGNATURE-----
Merge tag 'nf-next-23-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next. Mostly
nf_tables updates with two patches for connlabel and br_netfilter.
1) Rename function name to perform on-demand GC for rbtree elements,
and replace async GC in rbtree by sync GC. Patches from Florian Westphal.
2) Use commit_mutex for NFT_MSG_GETRULE_RESET to ensure that two
concurrent threads invoking this command do not underrun stateful
objects. Patches from Phil Sutter.
3) Use single hook to deal with IP and ARP packets in br_netfilter.
Patch from Florian Westphal.
4) Use atomic_t in netns->connlabel use counter instead of using a
spinlock, also patch from Florian.
5) Cleanups for stateful objects infrastructure in nf_tables.
Patches from Phil Sutter.
6) Flush path uses opaque set element offered by the iterator, instead of
calling pipapo_deactivate() which looks up for it again.
7) Set backend .flush interface always succeeds, make it return void
instead.
8) Add struct nft_elem_priv placeholder structure and use it by replacing
void * to pass opaque set element representation from backend to frontend
which defeats compiler type checks.
9) Shrink memory consumption of set element transactions, by reducing
struct nft_trans_elem object size and reducing stack memory usage.
10) Use struct nft_elem_priv also for set backend .insert operation too.
11) Carry reset flag in nft_set_dump_ctx structure, instead of passing it
as a function argument, from Phil Sutter.
netfilter pull request 23-10-25
* tag 'nf-next-23-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: Carry reset boolean in nft_set_dump_ctx
netfilter: nf_tables: set->ops->insert returns opaque set element in case of EEXIST
netfilter: nf_tables: shrink memory consumption of set elements
netfilter: nf_tables: expose opaque set element as struct nft_elem_priv
netfilter: nf_tables: set backend .flush always succeeds
netfilter: nft_set_pipapo: no need to call pipapo_deactivate() from flush
netfilter: nf_tables: Carry reset boolean in nft_obj_dump_ctx
netfilter: nf_tables: nft_obj_filter fits into cb->ctx
netfilter: nf_tables: Carry s_idx in nft_obj_dump_ctx
netfilter: nf_tables: A better name for nft_obj_filter
netfilter: nf_tables: Unconditionally allocate nft_obj_filter
netfilter: nf_tables: Drop pointless memset in nf_tables_dump_obj
netfilter: conntrack: switch connlabels to atomic_t
br_netfilter: use single forward hook for ip and arp
netfilter: nf_tables: Add locking for NFT_MSG_GETRULE_RESET requests
netfilter: nf_tables: Introduce nf_tables_getrule_single()
netfilter: nf_tables: Open-code audit log call in nf_tables_getrule()
netfilter: nft_set_rbtree: prefer sync gc to async worker
netfilter: nft_set_rbtree: rename gc deactivate+erase function
====================
Link: https://lore.kernel.org/r/20231025212555.132775-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
RTAX_FEATURE_ALLFRAG was added before the first git commit:
https://www.mail-archive.com/bk-commits-head@vger.kernel.org/msg03399.html
The feature would send packets to the fragmentation path if a box
receives a PMTU value with less than 1280 byte. However, since commit
9d289715eb ("ipv6: stop sending PTB packets for MTU < 1280"), such
message would be simply discarded. The feature flag is neither supported
in iproute2 utility. In theory one can still manipulate it with direct
netlink message, but it is not ideal because it was based on obsoleted
guidance of RFC-2460 (replaced by RFC-8200).
The feature would always test false at the moment, so remove related
code or mark them as unused.
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/d78e44dcd9968a252143ffe78460446476a472a1.1698156966.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
So that other users could access it. Notably MPTCP will use
it in the next patch.
No functional change intended.
Acked-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-4-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since 41f2c7c342 ("net/sched: act_ct: Fix promotion of offloaded
unreplied tuple"), flowtable GC pushes back flows with IPS_SEEN_REPLY
back to classic path in every run, ie. every second. This is because of
a new check for NF_FLOW_HW_ESTABLISHED which is specific of sched/act_ct.
In Netfilter's flowtable case, NF_FLOW_HW_ESTABLISHED never gets set on
and IPS_SEEN_REPLY is unreliable since users decide when to offload the
flow before, such bit might be set on at a later stage.
Fix it by adding a custom .gc handler that sched/act_ct can use to
deal with its NF_FLOW_HW_ESTABLISHED bit.
Fixes: 41f2c7c342 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple")
Reported-by: Vladimir Smelhaus <vl.sm@email.cz>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
net->ct.labels_used was meant to convey 'number of ip/nftables rules
that need the label extension allocated'.
act_ct enables this for each net namespace, which voids all attempts
to avoid ct->ext allocation when possible.
Move this increment to the control plane to request label extension
space allocation only when its needed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This work adds a new, minimal BPF-programmable device called "netkit"
(former PoC code-name "meta") we recently presented at LSF/MM/BPF. The
core idea is that BPF programs are executed within the drivers xmit routine
and therefore e.g. in case of containers/Pods moving BPF processing closer
to the source.
One of the goals was that in case of Pod egress traffic, this allows to
move BPF programs from hostns tcx ingress into the device itself, providing
earlier drop or forward mechanisms, for example, if the BPF program
determines that the skb must be sent out of the node, then a redirect to
the physical device can take place directly without going through per-CPU
backlog queue. This helps to shift processing for such traffic from softirq
to process context, leading to better scheduling decisions/performance (see
measurements in the slides).
In this initial version, the netkit device ships as a pair, but we plan to
extend this further so it can also operate in single device mode. The pair
comes with a primary and a peer device. Only the primary device, typically
residing in hostns, can manage BPF programs for itself and its peer. The
peer device is designated for containers/Pods and cannot attach/detach
BPF programs. Upon the device creation, the user can set the default policy
to 'pass' or 'drop' for the case when no BPF program is attached.
Additionally, the device can be operated in L3 (default) or L2 mode. The
management of BPF programs is done via bpf_mprog, so that multi-attach is
supported right from the beginning with similar API and dependency controls
as tcx. For details on the latter see commit 053c8e1f23 ("bpf: Add generic
attach/detach/query API for multi-progs"). tc BPF compatibility is provided,
so that existing programs can be easily migrated.
Going forward, we plan to use netkit devices in Cilium as the main device
type for connecting Pods. They will be operated in L3 mode in order to
simplify a Pod's neighbor management and the peer will operate in default
drop mode, so that no traffic is leaving between the time when a Pod is
brought up by the CNI plugin and programs attached by the agent.
Additionally, the programs we attach via tcx on the physical devices are
using bpf_redirect_peer() for inbound traffic into netkit device, hence the
latter is also supporting the ndo_get_peer_dev callback. Similarly, we use
bpf_redirect_neigh() for the way out, pushing from netkit peer to phys device
directly. Also, BIG TCP is supported on netkit device. For the follow-up
work in single device mode, we plan to convert Cilium's cilium_host/_net
devices into a single one.
An extensive test suite for checking device operations and the BPF program
and link management API comes as BPF selftests in this series.
Co-developed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://github.com/borkmann/iproute2/tree/pr/netkit
Link: http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf (24ff.)
Link: https://lore.kernel.org/r/20231024214904.29825-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Use more inclusive terms throughout the DSA subsystem by moving away
from "master" which is replaced by "conduit" and "slave" which is
replaced by "user". No functional changes.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Return struct nft_elem_priv instead of struct nft_set_ext for
consistency with ("netfilter: nf_tables: expose opaque set element as
struct nft_elem_priv") and to prepare the introduction of element
timeout updates from control path.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Instead of copying struct nft_set_elem into struct nft_trans_elem, store
the pointer to the opaque set element object in the transaction. Adapt
set backend API (and set backend implementations) to take the pointer to
opaque set element representation whenever required.
This patch deconstifies .remove() and .activate() set backend API since
these modify the set element opaque object. And it also constify
nft_set_elem_ext() this provides access to the nft_set_ext struct
without updating the object.
According to pahole on x86_64, this patch shrinks struct nft_trans_elem
size from 216 to 24 bytes.
This patch also reduces stack memory consumption by removing the
template struct nft_set_elem object, using the opaque set element object
instead such as from the set iterator API, catchall elements and the get
element command.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add placeholder structure and place it at the beginning of each struct
nft_*_elem for each existing set backend, instead of exposing elements
as void type to the frontend which defeats compiler type checks. Use
this pointer to this new type to replace void *.
This patch updates the following set backend API to use this new struct
nft_elem_priv placeholder structure:
- update
- deactivate
- flush
- get
as well as the following helper functions:
- nft_set_elem_ext()
- nft_set_elem_init()
- nft_set_elem_destroy()
- nf_tables_set_elem_destroy()
This patch adds nft_elem_priv_cast() to cast struct nft_elem_priv to
native element representation from the corresponding set backend.
BUILD_BUG_ON() makes sure this .priv placeholder is always at the top
of the opaque set element representation.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
.flush is always successful since this results from iterating over the
set elements to toggle mark the element as inactive in the next
generation.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The spinlock is back from the day when connabels did not have
a fixed size and reallocation had to be supported.
Remove it. This change also allows to call the helpers from
softirq or timers without deadlocks.
Also add WARN()s to catch refcounting imbalances.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In the previous implementation, when multiple xsk sockets were
associated with a single xsk_buff_pool, a situation could arise
where the xsk_tx_list maintained data at the front for one xsk
socket while starving the xsk sockets at the back of the list.
This could result in issues such as the inability to transmit packets,
increased latency, and jitter. To address this problem, we introduce
a new variable called tx_budget_spent, which limits each xsk to transmit
a maximum of MAX_PER_SOCKET_BUDGET tx descriptors. This allocation ensures
equitable opportunities for subsequent xsk sockets to send tx descriptors.
The value of MAX_PER_SOCKET_BUDGET is set to 32.
Signed-off-by: Albert Huang <huangjie.albert@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20231023125732.82261-1-huangjie.albert@bytedance.com
As more drivers begin to use the fragment API, update the
document about how to decide which API to use for the
driver author.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Lorenzo Bianconi <lorenzo@kernel.org>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Liang Chen <liangchen.linux@gmail.com>
CC: Alexander Lobakin <aleksander.lobakin@intel.com>
CC: Dima Tisnek <dimaqq@gmail.com>
Link: https://lore.kernel.org/r/20231020095952.11055-5-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently page pool supports the below use cases:
use case 1: allocate page without page splitting using
page_pool_alloc_pages() API if the driver knows
that the memory it need is always bigger than
half of the page allocated from page pool.
use case 2: allocate page frag with page splitting using
page_pool_alloc_frag() API if the driver knows
that the memory it need is always smaller than
or equal to the half of the page allocated from
page pool.
There is emerging use case [1] & [2] that is a mix of the
above two case: the driver doesn't know the size of memory it
need beforehand, so the driver may use something like below to
allocate memory with least memory utilization and performance
penalty:
if (size << 1 > max_size)
page = page_pool_alloc_pages();
else
page = page_pool_alloc_frag();
To avoid the driver doing something like above, add the
page_pool_alloc() API to support the above use case, and update
the true size of memory that is acctually allocated by updating
'*size' back to the driver in order to avoid exacerbating
truesize underestimate problem.
Rename page_pool_free() which is used in the destroy process to
__page_pool_destroy() to avoid confusion with the newly added
API.
1. https://lore.kernel.org/all/d3ae6bd3537fbce379382ac6a42f67e22f27ece2.1683896626.git.lorenzo@kernel.org/
2. https://lore.kernel.org/all/20230526054621.18371-3-liangchen.linux@gmail.com/
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Lorenzo Bianconi <lorenzo@kernel.org>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Liang Chen <liangchen.linux@gmail.com>
CC: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20231020095952.11055-4-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PP_FLAG_PAGE_FRAG is not really needed after pp_frag_count
handling is unified and page_pool_alloc_frag() is supported
in 32-bit arch with 64-bit DMA, so remove it.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Lorenzo Bianconi <lorenzo@kernel.org>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Liang Chen <liangchen.linux@gmail.com>
CC: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20231020095952.11055-3-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently when page_pool_create() is called with
PP_FLAG_PAGE_FRAG flag, page_pool_alloc_pages() is only
allowed to be called under the below constraints:
1. page_pool_fragment_page() need to be called to setup
page->pp_frag_count immediately.
2. page_pool_defrag_page() often need to be called to drain
the page->pp_frag_count when there is no more user will
be holding on to that page.
Those constraints exist in order to support a page to be
split into multi fragments.
And those constraints have some overhead because of the
cache line dirtying/bouncing and atomic update.
Those constraints are unavoidable for case when we need a
page to be split into more than one fragment, but there is
also case that we want to avoid the above constraints and
their overhead when a page can't be split as it can only
hold a fragment as requested by user, depending on different
use cases:
use case 1: allocate page without page splitting.
use case 2: allocate page with page splitting.
use case 3: allocate page with or without page splitting
depending on the fragment size.
Currently page pool only provide page_pool_alloc_pages() and
page_pool_alloc_frag() API to enable the 1 & 2 separately,
so we can not use a combination of 1 & 2 to enable 3, it is
not possible yet because of the per page_pool flag
PP_FLAG_PAGE_FRAG.
So in order to allow allocating unsplit page without the
overhead of split page while still allow allocating split
page we need to remove the per page_pool flag in
page_pool_is_last_frag(), as best as I can think of, it seems
there are two methods as below:
1. Add per page flag/bit to indicate a page is split or
not, which means we might need to update that flag/bit
everytime the page is recycled, dirtying the cache line
of 'struct page' for use case 1.
2. Unify the page->pp_frag_count handling for both split and
unsplit page by assuming all pages in the page pool is split
into a big fragment initially.
As page pool already supports use case 1 without dirtying the
cache line of 'struct page' whenever a page is recyclable, we
need to support the above use case 3 with minimal overhead,
especially not adding any noticeable overhead for use case 1,
and we are already doing an optimization by not updating
pp_frag_count in page_pool_defrag_page() for the last fragment
user, this patch chooses to unify the pp_frag_count handling
to support the above use case 3.
There is no noticeable performance degradation and some
justification for unifying the frag_count handling with this
patch applied using a micro-benchmark testing in [1].
1. https://lore.kernel.org/all/bf2591f8-7b3c-4480-bb2c-31dc9da1d6ac@huawei.com/
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Lorenzo Bianconi <lorenzo@kernel.org>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Liang Chen <liangchen.linux@gmail.com>
CC: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20231020095952.11055-2-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The handle of new hci_conn is always HCI_CONN_HANDLE_MAX + 1 if
the handle of the first hci_conn entry in hci_dev->conn_hash->list
is not HCI_CONN_HANDLE_MAX + 1. Use ida to manage the allocation of
hci_conn->handle to make it be unique.
Fixes: 9f78191cc9 ("Bluetooth: hci_conn: Always allocate unique handles")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the cleanup callback for slave bis and pa sync hcons.
Closing all bis hcons will trigger BIG Terminate Sync, while closing
all bises and the pa sync hcon will also trigger PA Terminate Sync.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables a broadcast sink to be informed if the PA
it has synced with is associated with an encrypted BIG,
by retrieving the socket QoS and checking the encryption
field.
After PA sync has been successfully established and the
first BIGInfo advertising report is received, a new hcon
is added and notified to the ISO layer. The ISO layer
sets the encryption field of the socket and hcon QoS
according to the encryption parameter of the BIGInfo
advertising report event.
After that, the userspace is woken up, and the QoS of the
new PA sync socket can be read, to inspect the encryption
field and follow up accordingly.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the master BIS cleanup procedure - as opposed to CIS cleanup,
no HCI disconnect command should be issued. A master BIS should only be
terminated by disabling periodic and extended advertising, and terminating
the BIG.
In case of a Broadcast Receiver, all BIS and PA connections can be
cleaned up by calling hci_conn_failed, since it contains all function
calls that are necessary for successful cleanup.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In 4way handshake offload, cfg80211_port_authorized enables driver
to indicate successful 4way handshake to cfg80211 layer. Currently
this path of port authorization is restricted to interface type
NL80211_IFTYPE_STATION and NL80211_IFTYPE_P2P_CLIENT. This patch
extends the support for NL80211_IFTYPE_AP and NL80211_IFTYPE_P2P_GO
interfaces to authorize peer STA/P2P_CLIENT, whenever authentication
is offloaded on the AP/P2P_GO interface.
Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com>
Link: https://lore.kernel.org/r/dee3b0a2b4f617e932c90bff4504a89389273632.1695721435.git.vinayak.yadawad@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
make htmldocs warns:
Documentation/driver-api/80211/cfg80211:48: ./include/net/cfg80211.h:7290: WARNING: Duplicate C declaration, also defined at cfg80211:7251.
Declaration is '.. c:function:: void cfg80211_rx_assoc_resp (struct net_device *dev, struct cfg80211_rx_assoc_resp *data)'.
This is because there's a function named cfg80211_rx_assoc_resp() and a struct
named cfg80211_rx_assoc_resp, see previous patch for more info.
To workaround this rename the struct to cfg80211_rx_assoc_resp_data. The
parameter for the function is named 'data' anyway so the naming here is
consistent.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231012114229.2931808-3-kvalo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
make htmldocs warns:
Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117.
Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'.
This is because there's a function named ieee80211_tx_status() and a struct named
ieee80211_tx_status. This has been discussed previously but no solution found:
https://lore.kernel.org/all/20220521114629.6ee9fc06@coco.lan/
There's also a bug open for three years with no solution in sight:
https://github.com/sphinx-doc/sphinx/pull/8313
So I guess we have no other solution than to a workaround this in the code,
for example to rename the function to ieee80211_tx_status_skb() to avoid the
name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in
which the skb is not provided as an argument, instead with
ieee80211_tx_status_skb() the skb is provided.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231012114229.2931808-2-kvalo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Correct typos and fix run-on sentences.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231001191633.19090-2-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Correct spelling of several words.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231001191633.19090-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As we are moving to MLO and links terms, also the airtime protection
will be done for a link rather than for a vif. Thus, some
drivers will need to know for which link to protect airtime.
Add link id as a parameter to the mgd_prepare_tx() callback.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.c7fc59a6780b.Ic88a5037d31e184a2dce0b031ece1a0a93a3a9da@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since userspace can choose now what link to establish the
TDLS on, we should know on what channel to do session protection.
Add a link id parameter to this callback.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.ef12ce3eb835.If864f406cfd9e24f36a2b88fd13a37328633fcf9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
EMLSR operation and SMPS operation cannot coexist. Thus, when EMLSR is
enabled, all SMPS signaling towards the AP should be stopped (it is
expected that the AP will consider SMPS to be off).
Rename IEEE80211_VIF_DISABLE_SMPS_OVERRIDE to IEEE80211_VIF_EML_ACTIVE
and use the flag as an indication from the driver that EMLSR is enabled.
When EMLSR is enabled SMPS flows towards the AP MLD should be stopped.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.fb2c2f9a0645.If6df5357568abd623a081f0f33b07e63fb8bba99@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a callback which the driver can use to add the vif debugfs.
We used to have this back until commit d260ff12e7 ("mac80211:
remove vif debugfs driver callbacks") where we thought that it
will be easier to just add them during interface add/remove.
However, now with multi-link, we want to have proper debugfs
for drivers for multi-link where some files might be in the
netdev for non-MLO connections, and in the links for MLO ones,
so we need to do some reconstruction when switching the mode.
Moving to this new call enables that and MLO drivers will have
to use it for proper debugfs operation.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.ac38913f6ab7.Iee731d746bb08fcc628fa776f337016a12dc62ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Back in 2015, Van Jacobson suggested to use usec resolution in TCP TS values.
This has been implemented in our private kernels.
Goals were :
1) better observability of delays in networking stacks.
2) better disambiguation of events based on TSval/ecr values.
3) building block for congestion control modules needing usec resolution.
Back then we implemented a schem based on private SYN options
to negotiate the feature.
For upstream submission, we chose to use a route attribute,
because this feature is probably going to be used in private
networks [1] [2].
ip route add 10/8 ... features tcp_usec_ts
Note that RFC 7323 recommends a
"timestamp clock frequency in the range 1 ms to 1 sec per tick.",
but also mentions
"the maximum acceptable clock frequency is one tick every 59 ns."
[1] Unfortunately RFC 7323 5.5 (Outdated Timestamps) suggests
to invalidate TS.Recent values after a flow was idle for more
than 24 days. This is the part making usec_ts a problem
for peers following this recommendation for long living
idle flows.
[2] Attempts to standardize usec ts went nowhere:
https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdfhttps://datatracker.ietf.org/doc/draft-wang-tcpm-low-latency-opt/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_paws_check() uses TCP_PAWS_24DAYS constant to detect if TCP TS
values might have wrapped after a long idle period.
This mechanism is described in RFC 7323 5.5 (Outdated Timestamps)
TCP_PAWS_24DAYS value was based on the assumption of a clock
of 1 Khz.
As we want to adopt a 1 Mhz clock in the future, we reduce
this constant.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This helper returns a TSval from a TCP socket.
It currently calls tcp_time_stamp_ms() but will soon
be able to return a usec based TSval, depending
on an upcoming tp->tcp_usec_ts field.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_ns_to_ts() is only used once from cookie_init_timestamp().
Also add the 'bool usec_ts' parameter to enable usec TS later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This helper returns a 32bit TCP TSval from skb->tstamp.
As we are going to support usec or ms units soon, rename it
to tcp_skb_timestamp_ts() and add a boolean to select the unit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation of usec TCP TS support, remove tcp_time_stamp_raw()
in favor of tcp_clock_ts() helper. This helper will return a suitable
32bit result to feed TS values, depending on a socket field.
Also add tcp_tw_tsval() and tcp_rsk_tsval() helpers to factorize
the details.
We do not yet support usec timestamps.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It delivers current TCP time stamp in ms unit, and is used
in place of confusing tcp_time_stamp_raw()
It is the same family than tcp_clock_ns() and tcp_clock_ms().
tcp_time_stamp_raw() will be replaced later for TSval
contexts with a more descriptive name.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation of adding usec TCP TS values, add tcp_time_stamp_ms()
for contexts needing ms based values.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cookie_init_timestamp() is supposed to return a 64bit timestamp
suitable for both TSval determination and setting of skb->tstamp.
Unfortunately it uses 32bit fields and overflows after
2^32 * 10^6 nsec (~49 days) of uptime.
Generated TSval are still correct, but skb->tstamp might be set
far away in the past, potentially confusing other layers.
tcp_ns_to_ts() is changed to return a full 64bit value,
ts and ts_now variables are changed to u64 type,
and TSMASK is removed in favor of shifts operations.
While we are at it, change this sequence:
ts >>= TSBITS;
ts--;
ts <<= TSBITS;
ts |= options;
to:
ts -= (1UL << TSBITS);
Fixes: 9a568de481 ("tcp: switch TCP TS option (RFC 7323) to 1ms clock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to make the function more generic so that it can be used by
other UDP tunnel implementations such as geneve and vxlan. To do that,
add the following arguments:
- source and destination UDP port;
- ifindex of the output interface, needed by vxlan;
- the tos, because in some cases it is not taken from struct
ip_tunnel_info (for example, when it's inherited from the inner
packet);
- the dst cache, because not all tunnel types (e.g. vxlan) want to
use the one from struct ip_tunnel_info.
With these parameters, the function no longer needs the full struct
ip_tunnel_info as argument and we can pass only the relevant part of
it (struct ip_tunnel_key).
This is similar to what already done for IPv4 in commit 72fc68c635
("ipv4: add new arguments to udp_tunnel_dst_lookup()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function is now UDP-specific, the protocol is always IPPROTO_UDP.
This is similar to what already done for IPv4 in commit 78f3655adc
("ipv4: remove "proto" argument from udp_tunnel_dst_lookup()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
At the moment ip6_dst_lookup_tunnel() is used only by bareudp.
Ideally, other UDP tunnel implementations should use it, but to do so
the function needs to accept new parameters that are specific for UDP
tunnels, such as the ports.
Prepare for these changes by renaming the function to
udp_tunnel6_dst_lookup() and move it to file
net/ipv6/ip6_udp_tunnel.c.
This is similar to what already done for IPv4 in commit bf3fcbf7e7
("ipv4: rename and move ip_route_output_tunnel()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently push everyone to use padding to align 64b values
in netlink. Un-padded nla_put_u64() doesn't even exist any more.
The story behind this possibly start with this thread:
https://lore.kernel.org/netdev/20121204.130914.1457976839967676240.davem@davemloft.net/
where DaveM was concerned about the alignment of a structure
containing 64b stats. If user space tries to access such struct
directly:
struct some_stats *stats = nla_data(attr);
printf("A: %llu", stats->a);
lack of alignment may become problematic for some architectures.
These days we most often put every single member in a separate
attribute, meaning that the code above would use a helper like
nla_get_u64(), which can deal with alignment internally.
Even for arches which don't have good unaligned access - access
aligned to 4B should be pretty efficient.
Kernel and well known libraries deal with unaligned input already.
Padded 64b is quite space-inefficient (64b + pad means at worst 16B
per attr vs 32b which takes 8B). It is also more typing:
if (nla_put_u64_pad(rsp, NETDEV_A_SOMETHING_SOMETHING,
value, NETDEV_A_SOMETHING_PAD))
Create a new attribute type which will use 32 bits at netlink
level if value is small enough (probably most of the time?),
and (4B-aligned) 64 bits otherwise. Kernel API is just:
if (nla_put_uint(rsp, NETDEV_A_SOMETHING_SOMETHING, value))
Calling this new type "just" sint / uint with no specific size
will hopefully also make people more comfortable with using it.
Currently telling people "don't use u8, you may need the bits,
and netlink will round up to 4B, anyway" is the #1 comment
we give to newcomers.
In terms of netlink layout it looks like this:
0 4 8 12 16
32b: [nlattr][ u32 ]
64b: [ pad ][nlattr][ u64 ]
uint(32) [nlattr][ u32 ]
uint(64) [nlattr][ u64 ]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
