This patch converts the top-level aead interface to the new style.
All user-level AEAD interface code have been moved into crypto/aead.h.
The allocation/free functions have switched over to the new way of
allocating tfms.
This patch also removes the double indrection on setkey so the
indirection now exists only at the alg level.
Apart from these there are no user-visible changes.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the helper crypto_aead_set_reqsize so that people
don't have to directly access the aead internals to set the reqsize.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crt_aead is an internal implementation detail and must not be
used outside of the crypto API itself. This patch replaces the
unnecessary uses of crt_aead with crypto_aead_ivsize.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a new primitive crypto_grab_spawn which is meant
to replace crypto_init_spawn and crypto_init_spawn2. Under the
new scheme the user no longer has to worry about reference counting
the alg object before it is subsumed by the spawn.
It is pretty much an exact copy of crypto_grab_aead.
Prior to calling this function spawn->frontend and spawn->inst
must have been set.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This trims off a couple of instructions of the total size of the
core AES transform by reordering the final branch in the AES-192
code path with the rounds that are performed regardless of whether
the branch is taken or not. Other than the slight size reduction,
this has no performance benefit.
Fix up a comment regarding the prototype of this function while
we're at it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This replaces the SHA-512 NEON module with the faster and more
versatile implementation from the OpenSSL project. It consists
of both a NEON and a generic ASM version of the core SHA-512
transform, where the NEON version reverts to the ASM version
when invoked in non-process context.
This patch is based on the OpenSSL upstream version b1a5d1c65208
of sha512-armv4.pl, which can be found here:
https://git.openssl.org/gitweb/?p=openssl.git;h=b1a5d1c65208
Performance relative to the generic implementation (measured
using tcrypt.ko mode=306 sec=1 running on a Cortex-A57 under
KVM):
input size block size asm neon old neon
16 16 1.39 2.54 2.21
64 16 1.32 2.33 2.09
64 64 1.38 2.53 2.19
256 16 1.31 2.28 2.06
256 64 1.38 2.54 2.25
256 256 1.40 2.77 2.39
1024 16 1.29 2.22 2.01
1024 256 1.40 2.82 2.45
1024 1024 1.41 2.93 2.53
2048 16 1.33 2.21 2.00
2048 256 1.40 2.84 2.46
2048 1024 1.41 2.96 2.55
2048 2048 1.41 2.98 2.56
4096 16 1.34 2.20 1.99
4096 256 1.40 2.84 2.46
4096 1024 1.41 2.97 2.56
4096 4096 1.41 3.01 2.58
8192 16 1.34 2.19 1.99
8192 256 1.40 2.85 2.47
8192 1024 1.41 2.98 2.56
8192 4096 1.41 2.71 2.59
8192 8192 1.51 3.51 2.69
Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add crypto compression alg for 842 hardware compression and decompression,
using the alg name "842" and driver_name "842-nx".
This uses only the PowerPC coprocessor hardware for 842 compression. It
also uses the hardware for decompression, but if the hardware fails it will
fall back to the 842 software decompression library, so that decompression
never fails (for valid 842 compressed buffers). A header must be used in
most cases, due to the hardware's restrictions on the buffers being
specifically aligned and sized.
Due to the header this driver adds, compressed buffers it creates cannot be
directly passed to the 842 software library for decompression. However,
compressed buffers created by the software 842 library can be passed to
this driver for hardware 842 decompression (with the exception of buffers
containing the "short data" template, as lib/842/842.h explains).
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the pSeries NX-842 driver: do not expect incoming buffers to be
exactly page-sized; do not break up input buffers to compress smaller
blocks; do not use any internal headers in the compressed data blocks;
remove the software decompression implementation; implement the pSeries
nx842_constraints.
This changes the pSeries NX-842 driver to perform constraints-based
compression so that it only needs to compress one entire input block at a
time. This removes the need for it to split input data blocks into
multiple compressed data sections in the output buffer, and removes the
need for any extra header info in the compressed data; all that is moved
(in a later patch) into the main crypto 842 driver. Additionally, the
842 software decompression implementation is no longer needed here, as
the crypto 842 driver will use the generic software 842 decompression
function as a fallback if any hardware 842 driver fails.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add driver for NX-842 hardware on the PowerNV platform.
This allows the use of the 842 compression hardware coprocessor on
the PowerNV platform.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add "constraints" for the NX-842 driver. The constraints are used to
indicate what the current NX-842 platform driver is capable of. The
constraints tell the NX-842 user what alignment, min and max length, and
length multiple each provided buffers should conform to. These are
required because the 842 hardware requires buffers to meet specific
constraints that vary based on platform - for example, the pSeries
max length is much lower than the PowerNV max length.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add NX-842 frontend that allows using either the pSeries platform or
PowerNV platform driver (to be added by later patch) for the NX-842
hardware. Update the MAINTAINERS file to include the new filenames.
Update Kconfig files to clarify titles and descriptions, and correct
dependencies.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the entire NX-842 driver for the pSeries platform from the file
nx-842.c to nx-842-pseries.c. This is required by later patches that
add NX-842 support for the PowerNV platform.
This patch does not alter the content of the pSeries NX-842 driver at
all, it only changes the filename.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the crypto 842 compression alg to use the software 842 compression
and decompression library. Add the crypto driver_name as "842-generic".
Remove the fallback to LZO compression.
Previously, this crypto compression alg attemped 842 compression using
PowerPC hardware, and fell back to LZO compression and decompression if
the 842 PowerPC hardware was unavailable or failed. This should not
fall back to any other compression method, however; users of this crypto
compression alg can fallback if desired, and transparent fallback tricks
callers into thinking they are getting 842 compression when they actually
get LZO compression - the failure of the 842 hardware should not be
transparent to the caller.
The crypto compression alg for a hardware device also should not be located
in crypto/ so this is now a software-only implementation that uses the 842
software compression/decompression library.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add 842-format software compression and decompression functions.
Update the MAINTAINERS 842 section to include the new files.
The 842 compression function can compress any input data into the 842
compression format. The 842 decompression function can decompress any
standard-format 842 compressed data - specifically, either a compressed
data buffer created by the 842 software compression function, or a
compressed data buffer created by the 842 hardware compressor (located
in PowerPC coprocessors).
The 842 compressed data format is explained in the header comments.
This is used in a later patch to provide a full software 842 compression
and decompression crypto interface.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the asm ICSWX and ICSWEPX opcodes. Add definitions for the
Coprocessor Request structures needed to use the icswx calls to
coprocessors. Add icswx() function to perform the ICSWX asm
using the provided Coprocessor Command Word value and
Coprocessor Request Block structure.
This is required for communication with the NX-842 coprocessor on
a PowerNV system.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Export the of_get_ibm_chip_id() function. This will be used by the
PowerNV NX-842 driver.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds a couple of test cases for CRC32 (not CRC32c) to
ensure that the generic and arch specific implementations
are in sync.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the test manager, there are a number of if-statements with expressions of
the form !x == y that incur warnings with gcc-5 of the following form:
../crypto/testmgr.c: In function '__test_aead':
../crypto/testmgr.c:523:12: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
if (!ret == template[i].fail) {
^
By converting the 'fail' member of struct aead_testvec and struct
cipher_testvec to a bool, we can get rid of the warnings.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In testmgr, struct pcomp_testvec takes a non-const 'params' field, which is
pointed to a const deflate_comp_params or deflate_decomp_params object. With
gcc-5 this incurs the following warnings:
In file included from ../crypto/testmgr.c:44:0:
../crypto/testmgr.h:28736:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
.params = &deflate_comp_params,
^
../crypto/testmgr.h:28748:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
.params = &deflate_comp_params,
^
../crypto/testmgr.h:28776:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
.params = &deflate_decomp_params,
^
../crypto/testmgr.h:28800:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
.params = &deflate_decomp_params,
^
Fix this by making the parameters pointer const and constifying the things
that use it.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use ADF_DH895XCC_FW instead of duplicating the string "qat_895xcc.bin"
when referring to the DH895xCC firmware.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Bug happens when a data size less than SHA block size is passed.
Since first attempt will be saved in buffer, second round attempt
get into two step to calculate op.inlen and op.outlen. The issue
resides in this step. A wrong value of op.inlen and outlen was being
calculated.
This patch fix this eliminate the nx_sha_build_sg_list, that is
useless in SHA's algorithm context. Instead we call nx_build_sg_list
directly and pass a previous calculated max_sg_len to it.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In NX we need to pass always a 16 multiple size nx_sg_list to
co processor. Trim function handle with this assuring all nx_sg_lists
are 16 multiple size, although data was not being considerated when
crop was done. It was causing an unalignment between size of the list
and data, corrupting csbcpb fields returning a -23 H_ST_PARM error, or
invalid operation.
This patch fix this recalculating how much data should be put back
in to_process variable what assures the size of sg_list will be
correct with size of the data.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since kzalloc() returns a void pointer, we don't need to cast the
return value in arch/x86/crypto/sha-mb/sha1_mb.c::sha1_mb_mod_init().
Signed-off-by: Firo Yang <firogm@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the user explicitly states that they don't care whether the
algorithm has been tested (type = CRYPTO_ALG_TESTED and mask = 0),
there is a corner case where we may erroneously return ENOENT.
This patch fixes it by correcting the logic in the test.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the user explicitly states that they don't care whether the
algorithm has been tested (type = CRYPTO_ALG_TESTED and mask = 0),
there is a corner case where we may erroneously return ENOENT.
This patch fixes it by correcting the logic in the test.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The commit 59afdc7b32 ("crypto:
api - Move module sig ifdef into accessor function") broke the
build when modules are completely disabled because we directly
dereference module->name.
This patch fixes this by using the accessor function module_name.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.
This patch also removes a bogus inclusion of algapi.h which should
only be used by algorithm/driver implementors and not crypto users.
Instead linux/crypto.h is added which is necessary because mac802154
also uses blkcipher in addition to aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
