There is a race resulting in alive SOCK_SEQPACKET socket
may change its state from TCP_ESTABLISHED to TCP_CLOSE:
unix_release_sock(peer) unix_dgram_sendmsg(sk)
sock_orphan(peer)
sock_set_flag(peer, SOCK_DEAD)
sock_alloc_send_pskb()
if !(sk->sk_shutdown & SEND_SHUTDOWN)
OK
if sock_flag(peer, SOCK_DEAD)
sk->sk_state = TCP_CLOSE
sk->sk_shutdown = SHUTDOWN_MASK
After that socket sk remains almost normal: it is able to connect, listen, accept
and recvmsg, while it can't sendmsg.
Since this is the only possibility for alive SOCK_SEQPACKET to change
the state in such way, we should better fix this strange and potentially
danger corner case.
Note, that we will return EPIPE here like this is normally done in sock_alloc_send_pskb().
Originally used ECONNREFUSED looks strange, since it's strange to return
a specific retval in dependence of race in kernel, when user can't affect on this.
Also, move TCP_CLOSE assignment for SOCK_DGRAM sockets under state lock
to fix race with unix_dgram_connect():
unix_dgram_connect(other) unix_dgram_sendmsg(sk)
unix_peer(sk) = NULL
unix_state_unlock(sk)
unix_state_double_lock(sk, other)
sk->sk_state = TCP_ESTABLISHED
unix_peer(sk) = other
unix_state_double_unlock(sk, other)
sk->sk_state = TCP_CLOSED
This patch fixes both of these races.
Fixes: 83301b5367 ("af_unix: Set TCP_ESTABLISHED for datagram sockets too")
Signed-off-by: Kirill Tkhai <tkhai@ya.ru>
Link: https://lore.kernel.org/r/135fda25-22d5-837a-782b-ceee50e19844@ya.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If register unix_stream_proto returns error, unix_dgram_proto needs
be unregistered.
Fixes: 94531cfcbe ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. The same also applies to get_random_int(), which is
just a wrapper around get_random_u32(). This was done as a basic find
and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Acked-by: Helge Deller <deller@gmx.de> # for parisc
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
- Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
- Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
- Freezer:
- Rewrite the core freezer to behave better wrt thawing and be simpler
in general, by replacing PF_FROZEN with TASK_FROZEN & fixing/adjusting
all the fallout.
- Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() & replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
- Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KjMD
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
Freezer:
- Rewrite the core freezer to behave better wrt thawing and be
simpler in general, by replacing PF_FROZEN with TASK_FROZEN &
fixing/adjusting all the fallout.
Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() &
replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications"
* tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
sched: Fix more TASK_state comparisons
sched: Fix TASK_state comparisons
sched/fair: Move call to list_last_entry() in detach_tasks
sched/fair: Cleanup loop_max and loop_break
sched/fair: Make sure to try to detach at least one movable task
sched: Show PF_flag holes
freezer,sched: Rewrite core freezer logic
sched: Widen TAKS_state literals
sched/wait: Add wait_event_state()
sched/completion: Add wait_for_completion_state()
sched: Add TASK_ANY for wait_task_inactive()
sched: Change wait_task_inactive()s match_state
freezer,umh: Clean up freezer/initrd interaction
freezer: Have {,un}lock_system_sleep() save/restore flags
sched: Rename task_running() to task_on_cpu()
sched/fair: Cleanup for SIS_PROP
sched/fair: Default to false in test_idle_cores()
sched/fair: Remove useless check in select_idle_core()
sched/fair: Avoid double search on same cpu
sched/fair: Remove redundant check in select_idle_smt()
...
syzbot reported a sequence of memory leaks, and one of them indicated we
failed to free a whole sk:
unreferenced object 0xffff8880126e0000 (size 1088):
comm "syz-executor419", pid 326, jiffies 4294773607 (age 12.609s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 7d 00 00 00 00 00 00 00 ........}.......
01 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace:
[<000000006fefe750>] sk_prot_alloc+0x64/0x2a0 net/core/sock.c:1970
[<0000000074006db5>] sk_alloc+0x3b/0x800 net/core/sock.c:2029
[<00000000728cd434>] unix_create1+0xaf/0x920 net/unix/af_unix.c:928
[<00000000a279a139>] unix_create+0x113/0x1d0 net/unix/af_unix.c:997
[<0000000068259812>] __sock_create+0x2ab/0x550 net/socket.c:1516
[<00000000da1521e1>] sock_create net/socket.c:1566 [inline]
[<00000000da1521e1>] __sys_socketpair+0x1a8/0x550 net/socket.c:1698
[<000000007ab259e1>] __do_sys_socketpair net/socket.c:1751 [inline]
[<000000007ab259e1>] __se_sys_socketpair net/socket.c:1748 [inline]
[<000000007ab259e1>] __x64_sys_socketpair+0x97/0x100 net/socket.c:1748
[<000000007dedddc1>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<000000007dedddc1>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
[<000000009456679f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
We can reproduce this issue by creating two AF_UNIX SOCK_STREAM sockets,
send()ing an OOB skb to each other, and close()ing them without consuming
the OOB skbs.
int skpair[2];
socketpair(AF_UNIX, SOCK_STREAM, 0, skpair);
send(skpair[0], "x", 1, MSG_OOB);
send(skpair[1], "x", 1, MSG_OOB);
close(skpair[0]);
close(skpair[1]);
Currently, we free an OOB skb in unix_sock_destructor() which is called via
__sk_free(), but it's too late because the receiver's unix_sk(sk)->oob_skb
is accounted against the sender's sk->sk_wmem_alloc and __sk_free() is
called only when sk->sk_wmem_alloc is 0.
In the repro sequences, we do not consume the OOB skb, so both two sk's
sock_put() never reach __sk_free() due to the positive sk->sk_wmem_alloc.
Then, no one can consume the OOB skb nor call __sk_free(), and we finally
leak the two whole sk.
Thus, we must free the unconsumed OOB skb earlier when close()ing the
socket.
Fixes: 314001f0bf ("af_unix: Add OOB support")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to udp_read_skb(), delete the unnecessary while loop in
unix_read_skb() for readability. Since recv_actor() cannot return a
value greater than skb->len (see sk_psock_verdict_recv()), remove the
redundant check.
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Link: https://lore.kernel.org/r/7009141683ad6cd3785daced3e4a80ba0eb773b5.1663909008.git.peilin.ye@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rewrite the core freezer to behave better wrt thawing and be simpler
in general.
By replacing PF_FROZEN with TASK_FROZEN, a special block state, it is
ensured frozen tasks stay frozen until thawed and don't randomly wake
up early, as is currently possible.
As such, it does away with PF_FROZEN and PF_FREEZER_SKIP, freeing up
two PF_flags (yay!).
Specifically; the current scheme works a little like:
freezer_do_not_count();
schedule();
freezer_count();
And either the task is blocked, or it lands in try_to_freezer()
through freezer_count(). Now, when it is blocked, the freezer
considers it frozen and continues.
However, on thawing, once pm_freezing is cleared, freezer_count()
stops working, and any random/spurious wakeup will let a task run
before its time.
That is, thawing tries to thaw things in explicit order; kernel
threads and workqueues before doing bringing SMP back before userspace
etc.. However due to the above mentioned races it is entirely possible
for userspace tasks to thaw (by accident) before SMP is back.
This can be a fatal problem in asymmetric ISA architectures (eg ARMv9)
where the userspace task requires a special CPU to run.
As said; replace this with a special task state TASK_FROZEN and add
the following state transitions:
TASK_FREEZABLE -> TASK_FROZEN
__TASK_STOPPED -> TASK_FROZEN
__TASK_TRACED -> TASK_FROZEN
The new TASK_FREEZABLE can be set on any state part of TASK_NORMAL
(IOW. TASK_INTERRUPTIBLE and TASK_UNINTERRUPTIBLE) -- any such state
is already required to deal with spurious wakeups and the freezer
causes one such when thawing the task (since the original state is
lost).
The special __TASK_{STOPPED,TRACED} states *can* be restored since
their canonical state is in ->jobctl.
With this, frozen tasks need an explicit TASK_FROZEN wakeup and are
free of undue (early / spurious) wakeups.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114649.055452969@infradead.org
TCP_LISTEN sockets is a special case. They preserve skb with a newly
connected sock till accept() makes it fully functional socket.
Receive queue of such socket may grow after connected peer
send messages there. Since these messages may contain scm_fds,
we should expose correct fdinfo::scm_fds for listening socket too.
Signed-off-by: Kirill Tkhai <tkhai@ya.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-07-09
We've added 94 non-merge commits during the last 19 day(s) which contain
a total of 125 files changed, 5141 insertions(+), 6701 deletions(-).
The main changes are:
1) Add new way for performing BTF type queries to BPF, from Daniel Müller.
2) Add inlining of calls to bpf_loop() helper when its function callback is
statically known, from Eduard Zingerman.
3) Implement BPF TCP CC framework usability improvements, from Jörn-Thorben Hinz.
4) Add LSM flavor for attaching per-cgroup BPF programs to existing LSM
hooks, from Stanislav Fomichev.
5) Remove all deprecated libbpf APIs in prep for 1.0 release, from Andrii Nakryiko.
6) Add benchmarks around local_storage to BPF selftests, from Dave Marchevsky.
7) AF_XDP sample removal (given move to libxdp) and various improvements around AF_XDP
selftests, from Magnus Karlsson & Maciej Fijalkowski.
8) Add bpftool improvements for memcg probing and bash completion, from Quentin Monnet.
9) Add arm64 JIT support for BPF-2-BPF coupled with tail calls, from Jakub Sitnicki.
10) Sockmap optimizations around throughput of UDP transmissions which have been
improved by 61%, from Cong Wang.
11) Rework perf's BPF prologue code to remove deprecated functions, from Jiri Olsa.
12) Fix sockmap teardown path to avoid sleepable sk_psock_stop, from John Fastabend.
13) Fix libbpf's cleanup around legacy kprobe/uprobe on error case, from Chuang Wang.
14) Fix libbpf's bpf_helpers.h to work with gcc for the case of its sec/pragma
macro, from James Hilliard.
15) Fix libbpf's pt_regs macros for riscv to use a0 for RC register, from Yixun Lan.
16) Fix bpftool to show the name of type BPF_OBJ_LINK, from Yafang Shao.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (94 commits)
selftests/bpf: Fix xdp_synproxy build failure if CONFIG_NF_CONNTRACK=m/n
bpf: Correctly propagate errors up from bpf_core_composites_match
libbpf: Disable SEC pragma macro on GCC
bpf: Check attach_func_proto more carefully in check_return_code
selftests/bpf: Add test involving restrict type qualifier
bpftool: Add support for KIND_RESTRICT to gen min_core_btf command
MAINTAINERS: Add entry for AF_XDP selftests files
selftests, xsk: Rename AF_XDP testing app
bpf, docs: Remove deprecated xsk libbpf APIs description
selftests/bpf: Add benchmark for local_storage RCU Tasks Trace usage
libbpf, riscv: Use a0 for RC register
libbpf: Remove unnecessary usdt_rel_ip assignments
selftests/bpf: Fix few more compiler warnings
selftests/bpf: Fix bogus uninitialized variable warning
bpftool: Remove zlib feature test from Makefile
libbpf: Cleanup the legacy uprobe_event on failed add/attach_event()
libbpf: Fix wrong variable used in perf_event_uprobe_open_legacy()
libbpf: Cleanup the legacy kprobe_event on failed add/attach_event()
selftests/bpf: Add type match test against kernel's task_struct
selftests/bpf: Add nested type to type based tests
...
====================
Link: https://lore.kernel.org/r/20220708233145.32365-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 6dd4142fb5 ("Merge branch 'af_unix-per-netns-socket-hash'") and
commit 51bae889fe ("af_unix: Put pathname sockets in the global hash
table.") changed a hash table layout.
Before:
unix_socket_table [0 - 255] : abstract & pathname sockets
[256 - 511] : unnamed sockets
After:
per-netns table [0 - 255] : abstract & pathname sockets
[256 - 511] : unnamed sockets
bsd_socket_table [0 - 255] : pathname sockets (sk_bind_node)
Now, while looking up sockets, we traverse the global table for the
pathname sockets and the first half of each per-netns hash table for
abstract sockets, where pathname sockets are also linked. Thus, the
more pathname sockets we have, the longer we take to look up abstract
sockets. This characteristic has been there before the layout change,
but we can improve it now.
This patch changes the per-netns hash table's layout so that sockets not
requiring lookup reside in the first half and do not impact the lookup of
abstract sockets.
per-netns table [0 - 255] : pathname & unnamed sockets
[256 - 511] : abstract sockets
bsd_socket_table [0 - 255] : pathname sockets (sk_bind_node)
We have run a test that bind()s 100,000 abstract/pathname sockets for
each, bind()s an abstract socket 100,000 times and measures the time
on __unix_find_socket_byname(). The result shows that the patch makes
each lookup faster.
Without this patch:
$ sudo ./funclatency -p 2278 --microseconds __unix_find_socket_byname.isra.44
usec : count distribution
0 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 126 | |
16 -> 31 : 1438 |* |
32 -> 63 : 4150 |*** |
64 -> 127 : 9049 |******* |
128 -> 255 : 37704 |******************************* |
256 -> 511 : 47533 |****************************************|
With this patch:
$ sudo ./funclatency -p 3648 --microseconds __unix_find_socket_byname.isra.46
usec : count distribution
0 -> 1 : 109 | |
2 -> 3 : 318 | |
4 -> 7 : 725 | |
8 -> 15 : 2501 |* |
16 -> 31 : 3061 |** |
32 -> 63 : 4028 |*** |
64 -> 127 : 9312 |******* |
128 -> 255 : 51372 |****************************************|
256 -> 511 : 28574 |********************** |
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20220705233715.759-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit cf2f225e26 ("af_unix: Put a socket into a per-netns hash table.")
accidentally broke user API for pathname sockets. A socket was able to
connect() to a pathname socket whose file was visible even if they were in
different network namespaces.
The commit puts all sockets into a per-netns hash table. As a result,
connect() to a pathname socket in a different netns fails to find it in the
caller's per-netns hash table and returns -ECONNREFUSED even when the task
can view the peer socket file.
We can reproduce this issue by:
Console A:
# python3
>>> from socket import *
>>> s = socket(AF_UNIX, SOCK_STREAM, 0)
>>> s.bind('test')
>>> s.listen(32)
Console B:
# ip netns add test
# ip netns exec test sh
# python3
>>> from socket import *
>>> s = socket(AF_UNIX, SOCK_STREAM, 0)
>>> s.connect('test')
Note when dumping sockets by sock_diag, procfs, and bpf_iter, they are
filtered only by netns. In other words, even if they are visible and
connect()able, all sockets in different netns are skipped while iterating
sockets. Thus, we need a fix only for finding a peer pathname socket.
This patch adds a global hash table for pathname sockets, links them with
sk_bind_node, and uses it in unix_find_socket_byinode(). By doing so, we
can keep sockets in per-netns hash tables and dump them easily.
Thanks to Sachin Sant and Leonard Crestez for reports, logs and a reproducer.
Fixes: cf2f225e26 ("af_unix: Put a socket into a per-netns hash table.")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Reported-by: Leonard Crestez <cdleonard@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Leonard Crestez <cdleonard@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
unix_table_locks are to protect the global hash table, unix_socket_table.
The previous commit removed it, so let's clean up the unnecessary locks.
Here is a test result on EC2 c5.9xlarge where 10 processes run concurrently
in different netns and bind 100,000 sockets for each.
without this series : 1m 38s
with this series : 11s
It is ~10x faster because the global hash table is split into 10 netns in
this case.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit replaces the global hash table with a per-netns one and removes
the global one.
We now link a socket in each netns's hash table so we can save some netns
comparisons when iterating through a hash bucket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds extra spin_lock/spin_unlock() for a per-netns
hash table inside the existing ones for unix_table_locks.
As of this commit, sockets are still linked in the global hash
table. After putting sockets in a per-netns hash table and
removing the old one in the next patch, we remove the global
locks in the last patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds a per netns hash table for AF_UNIX, which size is fixed
as UNIX_HASH_SIZE for now.
The first implementation defines a per-netns hash table as a single array
of lock and list:
struct unix_hashbucket {
spinlock_t lock;
struct hlist_head head;
};
struct netns_unix {
struct unix_hashbucket *hash;
...
};
But, Eric pointed out memory cost that the structure has holes because of
sizeof(spinlock_t), which is 4 (or more if LOCKDEP is enabled). [0] It
could be expensive on a host with thousands of netns and few AF_UNIX
sockets. For this reason, a per-netns hash table uses two dense arrays.
struct unix_table {
spinlock_t *locks;
struct hlist_head *buckets;
};
struct netns_unix {
struct unix_table table;
...
};
Note the length of the list has a significant impact rather than lock
contention, so having shared locks can be an option. But, per-netns
locks and lists still perform better than the global locks and per-netns
lists. [1]
Also, this patch adds a change so that struct netns_unix disappears from
struct net if CONFIG_UNIX is disabled.
[0]: https://lore.kernel.org/netdev/CANn89iLVxO5aqx16azNU7p7Z-nz5NrnM5QTqOzueVxEnkVTxyg@mail.gmail.com/
[1]: https://lore.kernel.org/netdev/20220617175215.1769-1-kuniyu@amazon.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the size of AF_UNIX hash table is UNIX_HASH_SIZE * 2,
the first half for bind()ed sockets and the second half for unbound
ones. UNIX_HASH_SIZE * 2 is used to define the table and iterate
over it.
In some places, we use ARRAY_SIZE(unix_socket_table) instead of
UNIX_HASH_SIZE * 2. However, we cannot use it anymore because we
will allocate the hash table dynamically. Then, we would have to
add UNIX_HASH_SIZE * 2 in many places, which would be troublesome.
This patch adapts the UNIX_HASH_SIZE definition to include bound
and unbound sockets and defines a new UNIX_HASH_MOD macro to ease
calculations.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some functions define a net pointer only for one-shot use. Others call
sock_net() redundantly even when a net pointer is available. Let's fix
these and make the code simpler.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently both splice() and sockmap use ->read_sock() to
read skb from receive queue, but for sockmap we only read
one entire skb at a time, so ->read_sock() is too conservative
to use. Introduce a new proto_ops ->read_skb() which supports
this sematic, with this we can finally pass the ownership of
skb to recv actors.
For non-TCP protocols, all ->read_sock() can be simply
converted to ->read_skb().
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220615162014.89193-3-xiyou.wangcong@gmail.com
Replace four WARN_ON() that have not triggered recently
with DEBUG_NET_WARN_ON_ONCE().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
unix_dgram_poll() calls unix_dgram_peer_wake_me() without `other`'s
lock held and check if its receive queue is full. Here we need to
use unix_recvq_full_lockless() instead of unix_recvq_full(), otherwise
KCSAN will report a data-race.
Fixes: 7d267278a9 ("unix: avoid use-after-free in ep_remove_wait_queue")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20220605232325.11804-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding
to very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space
to remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections
that have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting.
This makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core
from Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wjii
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
While preparing for Clang randstruct support (which duplicated many of
the warnings the randstruct GCC plugin warned about), one strange one
remained only for the randstruct GCC plugin. Eliminating this rids
the plugin of the last exception.
It seems the plugin is happy to dereference individual members of
a cross-struct cast, but it is upset about casting to a whole object
pointer. This only manifests in one place in the kernel, so just replace
the variable with individual member accesses. There is no change in
executable instruction output.
Drop the last exception from the randstruct GCC plugin.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Cong Wang <cong.wang@bytedance.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: netdev@vger.kernel.org
Cc: linux-hardening@vger.kernel.org
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Link: https://lore.kernel.org/lkml/20220511022217.58586-1-kuniyu@amazon.co.jp
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/lkml/20220511151542.4cb3ff17@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The internal recvmsg() functions have two parameters 'flags' and 'noblock'
that were merged inside skb_recv_datagram(). As a follow up patch to commit
f4b41f062c ("net: remove noblock parameter from skb_recv_datagram()")
this patch removes the separate 'noblock' parameter for recvmsg().
Analogue to the referenced patch for skb_recv_datagram() the 'flags' and
'noblock' parameters are unnecessarily split up with e.g.
err = sk->sk_prot->recvmsg(sk, msg, size, flags & MSG_DONTWAIT,
flags & ~MSG_DONTWAIT, &addr_len);
or in
err = INDIRECT_CALL_2(sk->sk_prot->recvmsg, tcp_recvmsg, udp_recvmsg,
sk, msg, size, flags & MSG_DONTWAIT,
flags & ~MSG_DONTWAIT, &addr_len);
instead of simply using only flags all the time and check for MSG_DONTWAIT
where needed (to preserve for the formerly separated no(n)block condition).
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20220411124955.154876-1-socketcan@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
skb_recv_datagram() has two parameters 'flags' and 'noblock' that are
merged inside skb_recv_datagram() by 'flags | (noblock ? MSG_DONTWAIT : 0)'
As 'flags' may contain MSG_DONTWAIT as value most callers split the 'flags'
into 'flags' and 'noblock' with finally obsolete bit operations like this:
skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, flags & MSG_DONTWAIT, &rc);
And this is not even done consistently with the 'flags' parameter.
This patch removes the obsolete and costly splitting into two parameters
and only performs bit operations when really needed on the caller side.
One missing conversion thankfully reported by kernel test robot. I missed
to enable kunit tests to build the mctp code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 314001f0bf ("af_unix: Add OOB support") introduced OOB for
AF_UNIX, but it lacks some changes for POLLPRI. Let's add the missing
piece.
In the selftest, normal datagrams are sent followed by OOB data, so this
commit replaces `POLLIN | POLLPRI` with just `POLLPRI` in the first test
case.
Fixes: 314001f0bf ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Out-of-band data automatically places a "mark" showing wherein the
sequence the out-of-band data would have been. If the out-of-band data
implies cancelling everything sent so far, the "mark" is helpful to flush
them. When the socket's read pointer reaches the "mark", the ioctl() below
sets a non zero value to the arg `atmark`:
The out-of-band data is queued in sk->sk_receive_queue as well as ordinary
data and also saved in unix_sk(sk)->oob_skb. It can be used to test if the
head of the receive queue is the out-of-band data meaning the socket is at
the "mark".
While testing that, unix_ioctl() reads unix_sk(sk)->oob_skb locklessly.
Thus, all accesses to oob_skb need some basic protection to avoid
load/store tearing which KCSAN detects when these are called concurrently:
- ioctl(fd_a, SIOCATMARK, &atmark, sizeof(atmark))
- send(fd_b_connected_to_a, buf, sizeof(buf), MSG_OOB)
BUG: KCSAN: data-race in unix_ioctl / unix_stream_sendmsg
write to 0xffff888003d9cff0 of 8 bytes by task 175 on cpu 1:
unix_stream_sendmsg (net/unix/af_unix.c:2087 net/unix/af_unix.c:2191)
sock_sendmsg (net/socket.c:705 net/socket.c:725)
__sys_sendto (net/socket.c:2040)
__x64_sys_sendto (net/socket.c:2048)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113)
read to 0xffff888003d9cff0 of 8 bytes by task 176 on cpu 0:
unix_ioctl (net/unix/af_unix.c:3101 (discriminator 1))
sock_do_ioctl (net/socket.c:1128)
sock_ioctl (net/socket.c:1242)
__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:874 fs/ioctl.c:860 fs/ioctl.c:860)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113)
value changed: 0xffff888003da0c00 -> 0xffff888003da0d00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 176 Comm: unix_race_oob_i Not tainted 5.17.0-rc5-59529-g83dc4c2af682 #12
Hardware name: Red Hat KVM, BIOS 1.11.0-2.amzn2 04/01/2014
Fixes: 314001f0bf ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 04c7820b77 ("bpf: tcp: Bpf iter batching and lock_sock")
introduces the batching algorithm to iterate TCP sockets with more
consistency.
This patch uses the same algorithm to iterate AF_UNIX sockets.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Link: https://lore.kernel.org/r/20220113002849.4384-3-kuniyu@amazon.co.jp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, unix_next_socket() is overloaded depending on the 2nd argument.
If it is NULL, unix_next_socket() returns the first socket in the hash. If
not NULL, it returns the next socket in the same hash list or the first
socket in the next non-empty hash list.
This patch refactors unix_next_socket() into two functions unix_get_first()
and unix_get_next(). unix_get_first() newly acquires a lock and returns
the first socket in the list. unix_get_next() returns the next socket in a
list or releases a lock and falls back to unix_get_first().
In the following patch, bpf iter holds entire sockets in a list and always
releases the lock before .show(). It always calls unix_get_first() to
acquire a lock in each iteration. So, this patch makes the change easier
to follow.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Link: https://lore.kernel.org/r/20220113002849.4384-2-kuniyu@amazon.co.jp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
sock.h is pretty heavily used (5k objects rebuilt on x86 after
it's touched). We can drop the include of filter.h from it and
add a forward declaration of struct sk_filter instead.
This decreases the number of rebuilt objects when bpf.h
is touched from ~5k to ~1k.
There's a lot of missing includes this was masking. Primarily
in networking tho, this time.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
When we bind an AF_UNIX socket without a name specified, the kernel selects
an available one from 0x00000 to 0xFFFFF. unix_autobind() starts searching
from a number in the 'static' variable and increments it after acquiring
two locks.
If multiple processes try autobind, they obtain the same lock and check if
a socket in the hash list has the same name. If not, one process uses it,
and all except one end up retrying the _next_ number (actually not, it may
be incremented by the other processes). The more we autobind sockets in
parallel, the longer the latency gets. We can avoid such a race by
searching for a name from a random number.
These show latency in unix_autobind() while 64 CPUs are simultaneously
autobind-ing 1024 sockets for each.
Without this patch:
usec : count distribution
0 : 1176 |*** |
2 : 3655 |*********** |
4 : 4094 |************* |
6 : 3831 |************ |
8 : 3829 |************ |
10 : 3844 |************ |
12 : 3638 |*********** |
14 : 2992 |********* |
16 : 2485 |******* |
18 : 2230 |******* |
20 : 2095 |****** |
22 : 1853 |***** |
24 : 1827 |***** |
26 : 1677 |***** |
28 : 1473 |**** |
30 : 1573 |***** |
32 : 1417 |**** |
34 : 1385 |**** |
36 : 1345 |**** |
38 : 1344 |**** |
40 : 1200 |*** |
With this patch:
usec : count distribution
0 : 1855 |****** |
2 : 6464 |********************* |
4 : 9936 |******************************** |
6 : 12107 |****************************************|
8 : 10441 |********************************** |
10 : 7264 |*********************** |
12 : 4254 |************** |
14 : 2538 |******** |
16 : 1596 |***** |
18 : 1088 |*** |
20 : 800 |** |
22 : 670 |** |
24 : 601 |* |
26 : 562 |* |
28 : 525 |* |
30 : 446 |* |
32 : 378 |* |
34 : 337 |* |
36 : 317 |* |
38 : 314 |* |
40 : 298 | |
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To replace unix_table_lock with per-hash locks in the next patch, we need
to save a hash in each socket because /proc/net/unix or BPF prog iterate
sockets while holding a hash table lock and release it later in a different
function.
Currently, we store a real/pseudo hash in struct unix_address. However, we
do not allocate it to unbound sockets, nor should we do just for that. For
this purpose, we can use sk_hash. Then, we no longer use the hash field in
struct unix_address and can remove it.
Also, this patch does
- rename unix_insert_socket() to unix_insert_unbound_socket()
- remove the redundant list argument from __unix_insert_socket() and
unix_insert_unbound_socket()
- use 'unsigned int' instead of 'unsigned' in __unix_set_addr_hash()
- remove 'inline' from unix_remove_socket() and
unix_insert_unbound_socket().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds three helper functions that calculate hashes for unbound
sockets and bound sockets with BSD/abstract addresses.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In BSD and abstract address cases, we store sockets in the hash table with
keys between 0 and UNIX_HASH_SIZE - 1. However, the hash saved in a socket
varies depending on its address type; sockets with BSD addresses always
have UNIX_HASH_SIZE in their unix_sk(sk)->addr->hash.
This is just for the UNIX_ABSTRACT() macro used to check the address type.
The difference of the saved hashes comes from the first byte of the address
in the first place. So, we can test it directly.
Then we can keep a real hash in each socket and replace unix_table_lock
with per-hash locks in the later patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To terminate address with '\0' in unix_bind_bsd(), we add
unix_create_addr() and call it in unix_bind_bsd() and unix_bind_abstract().
Also, unix_bind_abstract() does not return -EEXIST. Only
kern_path_create() and vfs_mknod() in unix_bind_bsd() can return it,
so we move the last error check in unix_bind() to unix_bind_bsd().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch removes unix_mkname() and postpones calculating a hash to
unix_bind_abstract(). Some BSD stuffs still remain in unix_bind()
though, the next patch packs them into unix_bind_bsd().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We should not call unix_mkname() before unix_find_other() and instead do
the same thing where necessary based on the address type:
- terminating the address with '\0' in unix_find_bsd()
- calculating the hash in unix_find_abstract().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
unix_mkname() tests socket address length and family and does some
processing based on the address type. It is called in the early stage,
and therefore some instructions are redundant and can end up in vain.
The address length/family tests are done twice in unix_bind(). Also, the
address type is rechecked later in unix_bind() and unix_find_other(), where
we can do the same processing. Moreover, in the BSD address case, the hash
is set to 0 but never used and confusing.
This patch moves the address tests out of unix_mkname(), and the following
patches move the other part into appropriate places and remove
unix_mkname() finally.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can return an error as a pointer and need not pass an additional
argument to unix_find_other().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As done in the commit fa42d910a3 ("unix_bind(): take BSD and abstract
address cases into new helpers"), this patch moves BSD and abstract address
cases from unix_find_other() into unix_find_bsd() and unix_find_abstract().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We do not use struct socket in unix_autobind() and pass struct sock to
unix_bind_bsd() and unix_bind_abstract(). Let's pass it to unix_autobind()
as well.
Also, this patch fixes these errors by checkpatch.pl.
ERROR: do not use assignment in if condition
#1795: FILE: net/unix/af_unix.c:1795:
+ if (test_bit(SOCK_PASSCRED, &sock->flags) && !u->addr
CHECK: Logical continuations should be on the previous line
#1796: FILE: net/unix/af_unix.c:1796:
+ if (test_bit(SOCK_PASSCRED, &sock->flags) && !u->addr
+ && (err = unix_autobind(sock)) != 0)
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The length of the AF_UNIX socket address contains an offset to the member
sun_path of struct sockaddr_un.
Currently, the preceding member is just sun_family, and its type is
sa_family_t and resolved to short. Therefore, the offset is represented by
sizeof(short). However, it is not clear and fragile to changes in struct
sockaddr_storage or sockaddr_un.
This commit makes it clear and robust by rewriting sizeof() with
offsetof().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On kernels before v5.15, calling read() on a unix socket after
shutdown(SHUT_RD) or shutdown(SHUT_RDWR) would return the data
previously written or EOF. But now, while read() after
shutdown(SHUT_RD) still behaves the same way, read() after
shutdown(SHUT_RDWR) always fails with -EINVAL.
This behaviour change was apparently inadvertently introduced as part of
a bug fix for a different regression caused by the commit adding sockmap
support to af_unix, commit 94531cfcbe ("af_unix: Add
unix_stream_proto for sockmap"). Those commits, for unclear reasons,
started setting the socket state to TCP_CLOSE on shutdown(SHUT_RDWR),
while this state change had previously only been done in
unix_release_sock().
Restore the original behaviour. The sockmap tests in
tests/selftests/bpf continue to pass after this patch.
Fixes: d0c6416bd7 ("unix: Fix an issue in unix_shutdown causing the other end read/write failures")
Link: https://lore.kernel.org/lkml/20211111140000.GA10779@axis.com/
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is distracting really, let's make this simpler,
because many callers had to take care of this
by themselves, even if on x86 this adds more
code than really needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yucong noticed we can't poll() sockets in sockmap even
when they are the destination sockets of redirections.
This is because we never poll any psock queues in ->poll(),
except for TCP. With ->sock_is_readable() now we can
overwrite >sock_is_readable(), invoke and implement it for
both UDP and AF_UNIX sockets.
Reported-by: Yucong Sun <sunyucong@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211008203306.37525-4-xiyou.wangcong@gmail.com
