[ Upstream commit 49aefd1317 ]
Commit b5f862180d was introduced to discard lowest hash bit for layer3+4 hashing
but it also removes last bit from non layer3+4 hashing
Below script shows layer2+3 hashing will result in same slave to be used with above commit.
$ cat hash.py
#/usr/bin/python3.6
h_dests=[0xa0, 0xa1]
h_source=0xe3
hproto=0x8
saddr=0x1e7aa8c0
daddr=0x17aa8c0
for h_dest in h_dests:
hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr)
hash ^= hash >> 16
hash ^= hash >> 8
print(hash)
print("with last bit removed")
for h_dest in h_dests:
hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr)
hash ^= hash >> 16
hash ^= hash >> 8
hash = hash >> 1
print(hash)
Output:
$ python3.6 hash.py
522133332
522133333 <-------------- will result in both slaves being used
with last bit removed
261066666
261066666 <-------------- only single slave used
Signed-off-by: suresh kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a6ab75cec1 upstream.
In __bond_release_one(), bond_set_carrier() is only called when bond
device has no slave. Therefore, if we remove the up slave from a master
with two slaves and keep the down slave, the master will remain up.
Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond))
statement.
Reproducer:
$ insmod bonding.ko mode=0 miimon=100 max_bonds=2
$ ifconfig bond0 up
$ ifenslave bond0 eth0 eth1
$ ifconfig eth0 down
$ ifenslave -d bond0 eth1
$ cat /proc/net/bonding/bond0
Fixes: ff59c4563a ("[PATCH] bonding: support carrier state for master")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/1645021088-38370-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 23de0d7b6f ]
When 803.2ad mode enables a participating port, it should update
the slave-array. I have observed that the member links are participating
and are part of the active aggregator while the traffic is egressing via
only one member link (in a case where two links are participating). Via
kprobes I discovered that slave-arr has only one link added while
the other participating link wasn't part of the slave-arr.
I couldn't see what caused that situation but the simple code-walk
through provided me hints that the enable_port wasn't always associated
with the slave-array update.
Fixes: ee63771474 ("bonding: Simplify the xmit function for modes that use xmit_hash")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220207222901.1795287-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 429e3d123d upstream.
Wrong hash sends single stream to multiple output interfaces.
The offset calculation was relative to skb->head, fix it to be relative
to skb->data.
Fixes: a815bde56b ("net, bonding: Refactor bond_xmit_hash for use with
xdp_buff")
Reviewed-by: Jussi Maki <joamaki@gmail.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e5bd03ae3 upstream.
In Linux bonding scenario, one packet is copied to several copies and sent
by all slave device of bond0 in mode 3(broadcast mode). The mode 3 xmit
function bond_xmit_broadcast() only ueses the last slave device's tx result
as the final result. In this case, if the last slave device is down, then
it always return NET_XMIT_DROP, even though the other slave devices xmit
success. It may cause the tx statistics error, and cause the application
(e.g. scp) consider the network is unreachable.
For example, use the following command to configure server A.
echo 3 > /sys/class/net/bond0/bonding/mode
ifconfig bond0 up
ifenslave bond0 eth0 eth1
ifconfig bond0 192.168.1.125
ifconfig eth0 up
ifconfig eth1 down
The slave device eth0 and eth1 are connected to server B(192.168.1.107).
Run the ping 192.168.1.107 -c 3 -i 0.2 command, the following information
is displayed.
PING 192.168.1.107 (192.168.1.107) 56(84) bytes of data.
64 bytes from 192.168.1.107: icmp_seq=1 ttl=64 time=0.077 ms
64 bytes from 192.168.1.107: icmp_seq=2 ttl=64 time=0.056 ms
64 bytes from 192.168.1.107: icmp_seq=3 ttl=64 time=0.051 ms
192.168.1.107 ping statistics
0 packets transmitted, 3 received
Actually, the slave device eth0 of the bond successfully sends three
ICMP packets, but the result shows that 0 packets are transmitted.
Also if we use scp command to get remote files, the command end with the
following printings.
ssh_exchange_identification: read: Connection timed out
So this patch modifies the bond_xmit_broadcast to return NET_XMIT_SUCCESS
if one slave device in the bond sends packets successfully. If all slave
devices send packets fail, the discarded packets stats is increased. The
skb is released when there is no slave device in the bond or the last slave
device is down.
Fixes: ae46f184bc ("bonding: propagate transmit status")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1c15b05bae ]
When 802.3ad bond mode is configured the ad_actor_system option is set to
"00:00:00:00:00:00". But when trying to set the all-zeroes MAC as actors'
system address it was failing with EINVAL.
An all-zeroes ethernet address is valid, only multicast addresses are not
valid values.
Fixes: 171a42c38c ("bonding: add netlink support for sys prio, actor sys mac, and port key")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20211221111345.2462-1-ffmancera@riseup.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b93c6a911a ]
When I do fuzz test for bonding device interface, I got the following
use-after-free Calltrace:
==================================================================
BUG: KASAN: use-after-free in bond_enslave+0x1521/0x24f0
Read of size 8 at addr ffff88825bc11c00 by task ifenslave/7365
CPU: 5 PID: 7365 Comm: ifenslave Tainted: G E 5.15.0-rc1+ #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
Call Trace:
dump_stack_lvl+0x6c/0x8b
print_address_description.constprop.0+0x48/0x70
kasan_report.cold+0x82/0xdb
__asan_load8+0x69/0x90
bond_enslave+0x1521/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f19159cf577
Code: b3 66 90 48 8b 05 11 89 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 78
RSP: 002b:00007ffeb3083c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffeb3084bca RCX: 00007f19159cf577
RDX: 00007ffeb3083ce0 RSI: 0000000000008990 RDI: 0000000000000003
RBP: 00007ffeb3084bc4 R08: 0000000000000040 R09: 0000000000000000
R10: 00007ffeb3084bc0 R11: 0000000000000246 R12: 00007ffeb3083ce0
R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeb3083cb0
Allocated by task 7365:
kasan_save_stack+0x23/0x50
__kasan_kmalloc+0x83/0xa0
kmem_cache_alloc_trace+0x22e/0x470
bond_enslave+0x2e1/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 7365:
kasan_save_stack+0x23/0x50
kasan_set_track+0x20/0x30
kasan_set_free_info+0x24/0x40
__kasan_slab_free+0xf2/0x130
kfree+0xd1/0x5c0
slave_kobj_release+0x61/0x90
kobject_put+0x102/0x180
bond_sysfs_slave_add+0x7a/0xa0
bond_enslave+0x11b6/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Last potentially related work creation:
kasan_save_stack+0x23/0x50
kasan_record_aux_stack+0xb7/0xd0
insert_work+0x43/0x190
__queue_work+0x2e3/0x970
delayed_work_timer_fn+0x3e/0x50
call_timer_fn+0x148/0x470
run_timer_softirq+0x8a8/0xc50
__do_softirq+0x107/0x55f
Second to last potentially related work creation:
kasan_save_stack+0x23/0x50
kasan_record_aux_stack+0xb7/0xd0
insert_work+0x43/0x190
__queue_work+0x2e3/0x970
__queue_delayed_work+0x130/0x180
queue_delayed_work_on+0xa7/0xb0
bond_enslave+0xe25/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff88825bc11c00
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes inside of
1024-byte region [ffff88825bc11c00, ffff88825bc12000)
The buggy address belongs to the page:
page:ffffea00096f0400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x25bc10
head:ffffea00096f0400 order:3 compound_mapcount:0 compound_pincount:0
flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff)
raw: 057ff00000010200 ffffea0009a71c08 ffff888240001968 ffff88810004dbc0
raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88825bc11b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88825bc11b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88825bc11c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88825bc11c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88825bc11d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Put new_slave in bond_sysfs_slave_add() will cause use-after-free problems
when new_slave is accessed in the subsequent error handling process. Since
new_slave will be put in the subsequent error handling process, remove the
unnecessary put to fix it.
In addition, when sysfs_create_file() fails, if some files have been crea-
ted successfully, we need to call sysfs_remove_file() to remove them.
Since there are sysfs_create_files() & sysfs_remove_files() can be used,
use these two functions instead.
Fixes: 7afcaec496 (bonding: use kobject_put instead of _del after kobject_add)
Signed-off-by: Huang Guobin <huangguobin4@huawei.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The parameter bond_params is a relatively large 192 byte sized
struct so pass it by reference rather than by value to reduce
copying.
Addresses-Coverity: ("Big parameter passed by value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With nested bonding devices the nested bond device's ndo_bpf was
called without a program causing it to decrement the static key
without a prior increment leading to negative count.
Fix the issue by 1) only calling slave's ndo_bpf when there's a
program to be loaded and 2) only decrement the count when a program
is unloaded.
Fixes: 9e2ee5c7e7 ("net, bonding: Add XDP support to the bonding driver")
Reported-by: syzbot+30622fb04ddd72a4d167@syzkaller.appspotmail.com
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On configs where there is no confirgured direct route to the target of
the ARP probes, these probes are still sent and may be replied to
properly, so no need to repeatedly complain about the missing route.
Signed-off-by: David Decotigny <ddecotig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use a more user friendly netlink error message when a device can't be
enslaved because it has IFF_MASTER, by not referring directly to a
kernel internal flag.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new vlan+srcmac xmit policy is not implementable with XDP since
in many cases the 802.1Q payload is not present in the packet. This
can be for example due to hardware offload or in the case of veth
due to use of skbuffs internally.
This also fixes the NULL deref with the vlan+srcmac xmit policy
reported by Jonathan Toppins by additionally checking the skb
pointer.
Fixes: a815bde56b ("net, bonding: Refactor bond_xmit_hash for use with xdp_buff")
Reported-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20210812145241.12449-1-joamaki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There seems to be no reason to have different error messages between
netlink and printk. It also cleans up the function slightly.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
bpf-next 2021-08-10
We've added 31 non-merge commits during the last 8 day(s) which contain
a total of 28 files changed, 3644 insertions(+), 519 deletions(-).
1) Native XDP support for bonding driver & related BPF selftests, from Jussi Maki.
2) Large batch of new BPF JIT tests for test_bpf.ko that came out as a result from
32-bit MIPS JIT development, from Johan Almbladh.
3) Rewrite of netcnt BPF selftest and merge into test_progs, from Stanislav Fomichev.
4) Fix XDP bpf_prog_test_run infra after net to net-next merge, from Andrii Nakryiko.
5) Follow-up fix in unix_bpf_update_proto() to enforce socket type, from Cong Wang.
6) Fix bpf-iter-tcp4 selftest to print the correct dest IP, from Jose Blanquicet.
7) Various misc BPF XDP sample improvements, from Niklas Söderlund, Matthew Cover,
and Muhammad Falak R Wani.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits)
bpf, tests: Add tail call test suite
bpf, tests: Add tests for BPF_CMPXCHG
bpf, tests: Add tests for atomic operations
bpf, tests: Add test for 32-bit context pointer argument passing
bpf, tests: Add branch conversion JIT test
bpf, tests: Add word-order tests for load/store of double words
bpf, tests: Add tests for ALU operations implemented with function calls
bpf, tests: Add more ALU64 BPF_MUL tests
bpf, tests: Add more BPF_LSH/RSH/ARSH tests for ALU64
bpf, tests: Add more ALU32 tests for BPF_LSH/RSH/ARSH
bpf, tests: Add more tests of ALU32 and ALU64 bitwise operations
bpf, tests: Fix typos in test case descriptions
bpf, tests: Add BPF_MOV tests for zero and sign extension
bpf, tests: Add BPF_JMP32 test cases
samples, bpf: Add an explict comment to handle nested vlan tagging.
selftests/bpf: Add tests for XDP bonding
selftests/bpf: Fix xdp_tx.c prog section name
net, core: Allow netdev_lower_get_next_private_rcu in bh context
bpf, devmap: Exclude XDP broadcast to master device
net, bonding: Add XDP support to the bonding driver
...
====================
Link: https://lore.kernel.org/r/20210810130038.16927-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XDP is implemented in the bonding driver by transparently delegating
the XDP program loading, removal and xmit operations to the bonding
slave devices. The overall goal of this work is that XDP programs
can be attached to a bond device *without* any further changes (or
awareness) necessary to the program itself, meaning the same XDP
program can be attached to a native device but also a bonding device.
Semantics of XDP_TX when attached to a bond are equivalent in such
setting to the case when a tc/BPF program would be attached to the
bond, meaning transmitting the packet out of the bond itself using one
of the bond's configured xmit methods to select a slave device (rather
than XDP_TX on the slave itself). Handling of XDP_TX to transmit
using the configured bonding mechanism is therefore implemented by
rewriting the BPF program return value in bpf_prog_run_xdp. To avoid
performance impact this check is guarded by a static key, which is
incremented when a XDP program is loaded onto a bond device. This
approach was chosen to avoid changes to drivers implementing XDP. If
the slave device does not match the receive device, then XDP_REDIRECT
is transparently used to perform the redirection in order to have
the network driver release the packet from its RX ring. The bonding
driver hashing functions have been refactored to allow reuse with
xdp_buff's to avoid code duplication.
The motivation for this change is to enable use of bonding (and
802.3ad) in hairpinning L4 load-balancers such as [1] implemented with
XDP and also to transparently support bond devices for projects that
use XDP given most modern NICs have dual port adapters. An alternative
to this approach would be to implement 802.3ad in user-space and
implement the bonding load-balancing in the XDP program itself, but
is rather a cumbersome endeavor in terms of slave device management
(e.g. by watching netlink) and requires separate programs for native
vs bond cases for the orchestrator. A native in-kernel implementation
overcomes these issues and provides more flexibility.
Below are benchmark results done on two machines with 100Gbit
Intel E810 (ice) NIC and with 32-core 3970X on sending machine, and
16-core 3950X on receiving machine. 64 byte packets were sent with
pktgen-dpdk at full rate. Two issues [2, 3] were identified with the
ice driver, so the tests were performed with iommu=off and patch [2]
applied. Additionally the bonding round robin algorithm was modified
to use per-cpu tx counters as high CPU load (50% vs 10%) and high rate
of cache misses were caused by the shared rr_tx_counter (see patch
2/3). The statistics were collected using "sar -n dev -u 1 10". On top
of that, for ice, further work is in progress on improving the XDP_TX
numbers [4].
-----------------------| CPU |--| rxpck/s |--| txpck/s |----
without patch (1 dev):
XDP_DROP: 3.15% 48.6Mpps
XDP_TX: 3.12% 18.3Mpps 18.3Mpps
XDP_DROP (RSS): 9.47% 116.5Mpps
XDP_TX (RSS): 9.67% 25.3Mpps 24.2Mpps
-----------------------
with patch, bond (1 dev):
XDP_DROP: 3.14% 46.7Mpps
XDP_TX: 3.15% 13.9Mpps 13.9Mpps
XDP_DROP (RSS): 10.33% 117.2Mpps
XDP_TX (RSS): 10.64% 25.1Mpps 24.0Mpps
-----------------------
with patch, bond (2 devs):
XDP_DROP: 6.27% 92.7Mpps
XDP_TX: 6.26% 17.6Mpps 17.5Mpps
XDP_DROP (RSS): 11.38% 117.2Mpps
XDP_TX (RSS): 14.30% 28.7Mpps 27.4Mpps
--------------------------------------------------------------
RSS: Receive Side Scaling, e.g. the packets were sent to a range of
destination IPs.
[1]: https://cilium.io/blog/2021/05/20/cilium-110#standalonelb
[2]: https://lore.kernel.org/bpf/20210601113236.42651-1-maciej.fijalkowski@intel.com/T/#t
[3]: https://lore.kernel.org/bpf/CAHn8xckNXci+X_Eb2WMv4uVYjO2331UWB2JLtXr_58z0Av8+8A@mail.gmail.com/
[4]: https://lore.kernel.org/bpf/20210805230046.28715-1-maciej.fijalkowski@intel.com/T/#t
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20210731055738.16820-4-joamaki@gmail.com
In preparation for adding XDP support to the bonding driver
refactor the packet hashing functions to be able to work with
any linear data buffer without an skb.
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Link: https://lore.kernel.org/bpf/20210731055738.16820-2-joamaki@gmail.com
commit <47595e32869f> ("<MAINTAINERS: Mark some staging directories>")
indicated the ipx network layer as obsolete in Jan 2018,
updated in the MAINTAINERS file
now, after being exposed for 3 years to refactoring,
so to delete the ipx net layer related code for good.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an option lacp_active, which is similar with team's runner.active.
This option specifies whether to send LACPDU frames periodically. If set
on, the LACPDU frames are sent along with the configured lacp_rate
setting. If set off, the LACPDU frames acts as "speak when spoken to".
Note, the LACPDU state frames still will be sent when init or unbind port.
v2: remove module parameter
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some time ago, I reported a calltrace issue
"did not find a suitable aggregator", please see[1].
After a period of analysis and reproduction, I find
that this problem is caused by concurrency.
Before the problem occurs, the bond structure is like follows:
bond0 - slaver0(eth0) - agg0.lag_ports -> port0 - port1
\
port0
\
slaver1(eth1) - agg1.lag_ports -> NULL
\
port1
If we run 'ifenslave bond0 -d eth1', the process is like below:
excuting __bond_release_one()
|
bond_upper_dev_unlink()[step1]
| | |
| | bond_3ad_lacpdu_recv()
| | ->bond_3ad_rx_indication()
| | spin_lock_bh()
| | ->ad_rx_machine()
| | ->__record_pdu()[step2]
| | spin_unlock_bh()
| | |
| bond_3ad_state_machine_handler()
| spin_lock_bh()
| ->ad_port_selection_logic()
| ->try to find free aggregator[step3]
| ->try to find suitable aggregator[step4]
| ->did not find a suitable aggregator[step5]
| spin_unlock_bh()
| |
| |
bond_3ad_unbind_slave() |
spin_lock_bh()
spin_unlock_bh()
step1: already removed slaver1(eth1) from list, but port1 remains
step2: receive a lacpdu and update port0
step3: port0 will be removed from agg0.lag_ports. The struct is
"agg0.lag_ports -> port1" now, and agg0 is not free. At the
same time, slaver1/agg1 has been removed from the list by step1.
So we can't find a free aggregator now.
step4: can't find suitable aggregator because of step2
step5: cause a calltrace since port->aggregator is NULL
To solve this concurrency problem, put bond_upper_dev_unlink()
after bond_3ad_unbind_slave(). In this way, we can invalid the port
first and skip this port in bond_3ad_state_machine_handler(). This
eliminates the situation that the slaver has been removed from the
list but the port is still valid.
[1]https://lore.kernel.org/netdev/10374.1611947473@famine/
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All other user triggered operations are gone from ndo_ioctl, so move
the SIOCBOND family into a custom operation as well.
The .ndo_ioctl() helper is no longer called by the dev_ioctl.c code now,
but there are still a few definitions in obsolete wireless drivers as well
as the appletalk and ieee802154 layers to call SIOCSIFADDR/SIOCGIFADDR
helpers from inside the kernel.
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most users of ndo_do_ioctl are ethernet drivers that implement
the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware
timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP.
Separate these from the few drivers that use ndo_do_ioctl to
implement SIOCBOND, SIOCBR and SIOCWANDEV commands.
This is a purely cosmetic change intended to help readers find
their way through the implementation.
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bonding driver supports two command codes for each operation: one
in the SIOCDEVPRIVATE range and another one with the same definition
but a unique command code.
Only the second set currently works in compat mode, as the ifr_data
expansion overwrites part of the ifr_slave field.
Move the private ones into ndo_siocdevprivate and change the
implementation to call the other function. This makes both version
work correctly.
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 9a5605505d (" bonding: Add struct bond_ipesc to manage SA") is causing
following build error when XFRM is not selected in kernel config.
lld: error: undefined symbol: xfrm_dev_state_flush
>>> referenced by bond_main.c:3453 (drivers/net/bonding/bond_main.c:3453)
>>> net/bonding/bond_main.o:(bond_netdev_event) in archive drivers/built-in.a
Fixes: 9a5605505d (" bonding: Add struct bond_ipesc to manage SA")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
CC: Taehee Yoo <ap420073@gmail.com>
CC: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bond_ipsec_offload_ok() is called to check whether the interface supports
ipsec offload or not.
bonding interface support ipsec offload only in active-backup mode.
So, if a bond interface is not in active-backup mode, it should return
false but it returns true.
Fixes: a3b658cfb6 ("bonding: allow xfrm offload setup post-module-load")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To dereference bond->curr_active_slave, it uses rcu_dereference().
But it and the caller doesn't acquire RCU so a warning occurs.
So add rcu_read_lock().
Splat looks like:
WARNING: suspicious RCU usage
5.13.0-rc6+ #1179 Not tainted
drivers/net/bonding/bond_main.c:571 suspicious
rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ping/974:
#0: ffff888109e7db70 (sk_lock-AF_INET){+.+.}-{0:0},
at: raw_sendmsg+0x1303/0x2cb0
stack backtrace:
CPU: 2 PID: 974 Comm: ping Not tainted 5.13.0-rc6+ #1179
Call Trace:
dump_stack+0xa4/0xe5
bond_ipsec_offload_ok+0x1f4/0x260 [bonding]
xfrm_output+0x179/0x890
xfrm4_output+0xfa/0x410
? __xfrm4_output+0x4b0/0x4b0
? __ip_make_skb+0xecc/0x2030
? xfrm4_udp_encap_rcv+0x800/0x800
? ip_local_out+0x21/0x3a0
ip_send_skb+0x37/0xa0
raw_sendmsg+0x1bfd/0x2cb0
Fixes: 18cb261afd ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bonding has been supporting ipsec offload.
When SA is added, bonding just passes SA to its own active real interface.
But it doesn't manage SA.
So, when events(add/del real interface, active real interface change, etc)
occur, bonding can't handle that well because It doesn't manage SA.
So some problems(panic, UAF, refcnt leak)occur.
In order to make it stable, it should manage SA.
That's the reason why struct bond_ipsec is added.
When a new SA is added to bonding interface, it is stored in the
bond_ipsec list. And the SA is passed to a current active real interface.
If events occur, it uses bond_ipsec data to handle these events.
bond->ipsec_list is protected by bond->ipsec_lock.
If a current active real interface is changed, the following logic works.
1. delete all SAs from old active real interface
2. Add all SAs to the new active real interface.
3. If a new active real interface doesn't support ipsec offload or SA's
option, it sets real_dev to NULL.
Fixes: 18cb261afd ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bonding interface can be nested and it supports ipsec offload.
So, it allows setting the nested bonding + ipsec scenario.
But code does not support this scenario.
So, it should be disallowed.
interface graph:
bond2
|
bond1
|
eth0
The nested bonding + ipsec offload may not a real usecase.
So, disallowing this scenario is fine.
Fixes: 18cb261afd ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To dereference bond->curr_active_slave, it uses rcu_dereference().
But it and the caller doesn't acquire RCU so a warning occurs.
So add rcu_read_lock().
Test commands:
ip netns add A
ip netns exec A bash
modprobe netdevsim
echo "1 1" > /sys/bus/netdevsim/new_device
ip link add bond0 type bond
ip link set eth0 master bond0
ip link set eth0 up
ip link set bond0 up
ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \
transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \
0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \
dst 14.0.0.70/24 proto tcp offload dev bond0 dir in
ip x s f
Splat looks like:
=============================
WARNING: suspicious RCU usage
5.13.0-rc3+ #1168 Not tainted
-----------------------------
drivers/net/bonding/bond_main.c:448 suspicious rcu_dereference_check()
usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by ip/705:
#0: ffff888106701780 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{3:3},
at: xfrm_netlink_rcv+0x59/0x80 [xfrm_user]
#1: ffff8880075b0098 (&x->lock){+.-.}-{2:2},
at: xfrm_state_delete+0x16/0x30
stack backtrace:
CPU: 6 PID: 705 Comm: ip Not tainted 5.13.0-rc3+ #1168
Call Trace:
dump_stack+0xa4/0xe5
bond_ipsec_del_sa+0x16a/0x1c0 [bonding]
__xfrm_state_delete+0x51f/0x730
xfrm_state_delete+0x1e/0x30
xfrm_state_flush+0x22f/0x390
xfrm_flush_sa+0xd8/0x260 [xfrm_user]
? xfrm_flush_policy+0x290/0x290 [xfrm_user]
xfrm_user_rcv_msg+0x331/0x660 [xfrm_user]
? rcu_read_lock_sched_held+0x91/0xc0
? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user]
? find_held_lock+0x3a/0x1c0
? mutex_lock_io_nested+0x1210/0x1210
? sched_clock_cpu+0x18/0x170
netlink_rcv_skb+0x121/0x350
[ ... ]
Fixes: 18cb261afd ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To dereference bond->curr_active_slave, it uses rcu_dereference().
But it and the caller doesn't acquire RCU so a warning occurs.
So add rcu_read_lock().
Test commands:
ip link add dummy0 type dummy
ip link add bond0 type bond
ip link set dummy0 master bond0
ip link set dummy0 up
ip link set bond0 up
ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 \
mode transport \
reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \
0x44434241343332312423222114131211f4f3f2f1 128 sel \
src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp offload \
dev bond0 dir in
Splat looks like:
=============================
WARNING: suspicious RCU usage
5.13.0-rc3+ #1168 Not tainted
-----------------------------
drivers/net/bonding/bond_main.c:411 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/684:
#0: ffffffff9a2757c0 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{3:3},
at: xfrm_netlink_rcv+0x59/0x80 [xfrm_user]
55.191733][ T684] stack backtrace:
CPU: 0 PID: 684 Comm: ip Not tainted 5.13.0-rc3+ #1168
Call Trace:
dump_stack+0xa4/0xe5
bond_ipsec_add_sa+0x18c/0x1f0 [bonding]
xfrm_dev_state_add+0x2a9/0x770
? memcpy+0x38/0x60
xfrm_add_sa+0x2278/0x3b10 [xfrm_user]
? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user]
? register_lock_class+0x1750/0x1750
xfrm_user_rcv_msg+0x331/0x660 [xfrm_user]
? rcu_read_lock_sched_held+0x91/0xc0
? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user]
? find_held_lock+0x3a/0x1c0
? mutex_lock_io_nested+0x1210/0x1210
? sched_clock_cpu+0x18/0x170
netlink_rcv_skb+0x121/0x350
? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user]
? netlink_ack+0x9d0/0x9d0
? netlink_deliver_tap+0x17c/0xa50
xfrm_netlink_rcv+0x68/0x80 [xfrm_user]
netlink_unicast+0x41c/0x610
? netlink_attachskb+0x710/0x710
netlink_sendmsg+0x6b9/0xb70
[ ... ]
Fixes: 18cb261afd ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial conflict in net/netfilter/nf_tables_api.c.
Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.
skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 3c9ef511b9 ("bonding: avoid adding slave device with
IFF_MASTER flag") fix a crash when add slave device with IFF_MASTER,
but it rejects the scenario of nested bonding device.
As Eric Dumazet described: since there indeed is a usage scenario about
nesting bonding, we should not break it.
So we add a new judgment condition to allow nesting of bonding device.
Fixes: 3c9ef511b9 ("bonding: avoid adding slave device with IFF_MASTER flag")
Suggested-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Di Zhu <zhudi21@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following steps will definitely cause the kernel to crash:
ip link add vrf1 type vrf table 1
modprobe bonding.ko max_bonds=1
echo "+vrf1" >/sys/class/net/bond0/bonding/slaves
rmmod bonding
The root cause is that: When the VRF is added to the slave device,
it will fail, and some cleaning work will be done. because VRF device
has IFF_MASTER flag, cleanup process will not clear the IFF_BONDING flag.
Then, when we unload the bonding module, unregister_netdevice_notifier()
will treat the VRF device as a bond master device and treat netdev_priv()
as struct bonding{} which actually is struct net_vrf{}.
By analyzing the processing logic of bond_enslave(), it seems that
it is not allowed to add the slave device with the IFF_MASTER flag, so
we need to add a code check for this situation.
Signed-off-by: Di Zhu <zhudi21@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The round-robin rr_tx_counter was shared across CPUs leading to
significant cache thrashing at high packet rates. This patch switches
the round-robin packet counter to use a per-cpu variable to decide
the destination slave.
On a test with 2x100Gbit ICE nic with pktgen_sample_04_many_flows.sh
(-s 64 -t 32) the tx rate was 19.6Mpps before and 22.3Mpps after
this patch.
"perf top -e cache_misses" before:
12.31% [bonding] [k] bond_xmit_roundrobin_slave_get
10.59% [sch_fq_codel] [k] fq_codel_dequeue
9.34% [kernel] [k] skb_release_data
after:
15.42% [sch_fq_codel] [k] fq_codel_dequeue
10.06% [kernel] [k] __memset
9.12% [kernel] [k] skb_release_data
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable ret is being initialized with a value that is never read,
it is being updated later on. The assignment is redundant and can be
removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Silence this warning by using strscpy_pad() directly:
drivers/net/bonding/bond_main.c:4877:3: warning: 'strncpy' specified bound 16 equals destination size [-Wstringop-truncation]
4877 | strncpy(params->primary, primary, IFNAMSIZ);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Additionally replace other strncpy() uses, as it is considered deprecated:
https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202102150705.fdR6obB0-lkp@intel.com
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/becase/because/
s/reqeusts/requests/
s/funcions/functions/
s/addreses/addresses/
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Code indent should use tabs where possible, so
use tabs instead of space for code indent.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Braces {} are not necessary for single statement blocks,
so remove these braces {}.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix incorrect code indent for conditional statements.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add some blank lines after declarations as required.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If bond_kobj_init() or later kzalloc() in bond_alloc_slave() fail,
then we call kobject_put() on the slave->kobj. This in turn calls
the release function slave_kobj_release() which will always try to
cancel_delayed_work_sync(&slave->notify_work), which shouldn't be
done on an uninitialized work struct.
Always initialize the work struct earlier to avoid problems here.
Syzbot bisected this down to a completely pointless commit, some
fault injection may have been at work here that caused the alloc
failure in the first place, which may interact badly with bisect.
Reported-by: syzbot+bfda097c12a00c8cae67@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bond works in mode 4, and performs down/up operations on the bond
that is normally negotiated. The probability of bond-> slave_arr is NULL
Test commands:
ifconfig bond1 down
ifconfig bond1 up
The conflict occurs in the following process：
__dev_open (CPU A)
--bond_open
--queue_delayed_work(bond->wq,&bond->ad_work,0);
--bond_update_slave_arr
--bond_3ad_get_active_agg_info
ad_work(CPU B)
--bond_3ad_state_machine_handler
--ad_agg_selection_logic
ad_work runs on cpu B. In the function ad_agg_selection_logic, all
agg->is_active will be cleared. Before the new active aggregator is
selected on CPU B, bond_3ad_get_active_agg_info failed on CPU A,
bond->slave_arr will be set to NULL. The best aggregator in
ad_agg_selection_logic has not changed, no need to update slave arr.
The conflict occurred in that ad_agg_selection_logic clears
agg->is_active under mode_lock, but bond_open -> bond_update_slave_arr
is inspecting agg->is_active outside the lock.
Also, bond_update_slave_arr is normal for potential sleep when
allocating memory, so replace the WARN_ON with a call to might_sleep.
Signed-off-by: jinyiting <jinyiting@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove repeated word "that".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following make W=1 kernel build warning:
drivers/net/bonding/bond_main.c:982: warning: expecting prototype for change_active_interface(). Prototype was for bond_change_active_slave() instead
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
