Check that all fields of a V2 algorithm header fit into the available
firmware data buffer.
The wmfw V2 format introduced variable-length strings in the algorithm
block header. This means the overall header length is variable, and the
position of most fields varies depending on the length of the string
fields. Each field must be checked to ensure that it does not overflow
the firmware data buffer.
As this ia bugfix patch, the fixes avoid making any significant change to
the existing code. This makes it easier to review and less likely to
introduce new bugs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the payload length check in cs_dsp_load() and cs_dsp_coeff_load()
to be done before the block is processed.
The check that the length of a block payload does not exceed the number
of remaining bytes in the firwmware file buffer was being done near the
end of the loop iteration. However, some code before that check used the
length field without validating it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return an error from cs_dsp_power_up() if a block header is longer
than the amount of data left in the file.
The previous code in cs_dsp_load() and cs_dsp_load_coeff() would loop
while there was enough data left in the file for a valid region. This
protected against overrunning the end of the file data, but it didn't
abort the file processing with an error.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the checking that firmware file buffer is large enough for the
wmfw header, to prevent overrunning the buffer.
The original code tested that the firmware data buffer contained
enough bytes for the sums of the size of the structs
wmfw_header + wmfw_adsp1_sizes + wmfw_footer
But wmfw_adsp1_sizes is only used on ADSP1 firmware. For ADSP2 and
Halo Core the equivalent struct is wmfw_adsp2_sizes, which is
4 bytes longer. So the length check didn't guarantee that there
are enough bytes in the firmware buffer for a header with
wmfw_adsp2_sizes.
This patch splits the length check into three separate parts. Each
of the wmfw_header, wmfw_adsp?_sizes and wmfw_footer are checked
separately before they are used.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A write sequence is a sequence of register addresses
and values executed by some Cirrus DSPs following
certain power state transitions.
Add support for Cirrus drivers to update or add to a
write sequence present in firmware.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20240620161745.2312359-2-jogletre@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Retrieving the system framebuffer's parent device in sysfb_init()
increments the parent device's reference count. Hence release the
reference before leaving the init function.
Adding the sysfb platform device acquires and additional reference
for the parent. This keeps the parent device around while the system
framebuffer is in use.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 9eac534db0 ("firmware/sysfb: Set firmware-framebuffer parent device")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: <stable@vger.kernel.org> # v6.9+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625081818.15696-1-tzimmermann@suse.de
The main addition is the split of bus and driver into distinct modules
The FF-A bus module is initialized at subsys_initcall level when builtin.
FF-A drivers initialization is now changed to module_init level so that
pKVM ffa proxy is all setup and running in case pKVM hypervisor needs to
trap and handle FF-A calls.
One of the reason for not having this split from the beginning is the
need to workaround the FF-A v1.0 NULL UUID. The FF-A bus layer called
into FF-A driver and populated the device UUID if it matches with the
driver attempting to match. Moving the workaround away from the FF-A
bus layer to the FF-A core driver as a bus notifier will help to remove
the dependency.
-----BEGIN PGP SIGNATURE-----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=Kl7/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmZ9eiUACgkQYKtH/8kJ
Uif0zBAAjk+BS5UP627Uhej+cXrZhHkwRrj6mJ9C4wFYR6672vxhdMh+wPZcbh/H
yl8/Z+1TUBTmVmQtmKyi0cRhFFX12I0FyXpa7n7WVMhXnmvYRd2SjbRctYfc3pxW
C1TqHxM3a7bkaknzM4N5Uuj3qpwV74Hbp+rfaEdH4pL44vV2o2OkueM5IsBpgnSb
Pe1Wn6zXgXFIQyo8aVF7DGxNuBleNgxtX+zfcY5694IGKDKn2llsKxVeM5cDNg2q
WmKQ7rz7ZqpkDxQBL3wLZnd7lziSPVQ9jJ3m7ECzj7W0RAPQTskeNIlKyKK+9kHB
HmmiOlLbQu+lirgZ15N3t8kiYFNVh8HDK+p5w/dgUD4EAT+TZgQgun9d61VLf6AT
uD4XF0fPB3B3PKAfOhp7ZOU6sZH4uibFh+8RAm9xRJjXYvA0Il7gcwbC45O1dQK7
cqusKECEPTKsFggj0fuYgfDiNEgZpGSFjKAfYvB63aRZjoj7L29YhMl0Hwr87dFC
vsoJgs0pDW+V4ajqDoRPOLWkDwafMWjIrXxDFTEEw8xLQMTSOUC2Yei4sPDViLLG
3HTlssc1gO2axhrn5SpxPCgX+UruC4MIacj7kntv1VhYmOE5yoOLeTGV6lWA0LGm
NSqz0Gr8N+ycbtU2hNu/HULt6TViI3/SwRr2KK45rWHK7qHBu0Q=
=tW+N
-----END PGP SIGNATURE-----
Merge tag 'ffa-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A driver updates for v6.11
The main addition is the split of bus and driver into distinct modules
The FF-A bus module is initialized at subsys_initcall level when builtin.
FF-A drivers initialization is now changed to module_init level so that
pKVM ffa proxy is all setup and running in case pKVM hypervisor needs to
trap and handle FF-A calls.
One of the reason for not having this split from the beginning is the
need to workaround the FF-A v1.0 NULL UUID. The FF-A bus layer called
into FF-A driver and populated the device UUID if it matches with the
driver attempting to match. Moving the workaround away from the FF-A
bus layer to the FF-A core driver as a bus notifier will help to remove
the dependency.
* tag 'ffa-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Split bus and driver into distinct modules
firmware: arm_ffa: Move the FF-A v1.0 NULL UUID workaround to bus notifier
Link: https://lore.kernel.org/r/20240624103451.2870146-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The main addition this time is the support for platform to agent(p2a
also referred sometimes as notification or Rx) channel completion via
interrupt driven method. Currently, the OSPM agent clears or
acknowledge the receipt of the norification or delayed response by
updating the flags in the shared memory region which the platform is
expected to poll.
On some platforms that are completely interrupt driven, the OSPM
agent is expected to send a response message instead. This change
adds the support for the same.
Other changes include addition of a separate mailing list specific to
SCMI to allow open discussions about the interface itself in addition
to the kernel driver updates and support for system suspend via the
platform noification used on some systems.
-----BEGIN PGP SIGNATURE-----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=LNEQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=y+uP
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI driver updates for v6.11
The main addition this time is the support for platform to agent(p2a
also referred sometimes as notification or Rx) channel completion via
interrupt driven method. Currently, the OSPM agent clears or
acknowledge the receipt of the norification or delayed response by
updating the flags in the shared memory region which the platform is
expected to poll.
On some platforms that are completely interrupt driven, the OSPM
agent is expected to send a response message instead. This change
adds the support for the same.
Other changes include addition of a separate mailing list specific to
SCMI to allow open discussions about the interface itself in addition
to the kernel driver updates and support for system suspend via the
platform noification used on some systems.
* tag 'scmi-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Add support for platform to agent channel completion
dt-bindings: firmware: arm,scmi: Add support for notification completion channel
firmware: arm_scmi: Add support for system suspend in power control driver
MAINTAINERS: Add mailing list for SCMI drivers
Link: https://lore.kernel.org/r/20240620093924.375244-3-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the dmi driver for riscv which would allow access the
SMBIOS info through some userspace file(/sys/firmware/dmi/*).
The change was based on that of arm64 and has been verified
by dmidecode tool.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240613065507.287577-1-haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/meson/meson_sm.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240613-md-arm64-drivers-firmware-meson-v1-1-28e4138a8597@quicinc.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The "memory protection" mechanism mentioned in the comment is the SHM
Bridge. This is also the reason why we do not convert this call to using
the TZ memory allocator.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-13-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Parse the "memory-region" property and - if present - use it to assign
the dedicated reserved memory to the underlying DMA callbacks which will
then allocate memory for the SCM calls from it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-12-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SHM Bridge is a safety mechanism allowing to limit the amount of memory
shared between the kernel and the TrustZone to regions explicitly marked
as such.
Add a variant of the tzmem allocator that configures the memory pools as
SHM bridges. It also enables the SHM bridge globally so non-SHM bridge
memory will no longer work with SCM calls.
If enabled at build-time, it will still be checked for availability at
run-time. If the architecture doesn't support SHM Bridge, the allocator
will fall back to the generic mode.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-11-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SHM Bridge is a safety mechanism allowing to limit the amount of memory
shared between the kernel and the TrustZone to regions explicitly marked
as such.
Add low-level primitives for enabling SHM bridge support as well as
creating and destroying SHM bridges to qcom-scm.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-10-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Drop the DMA mapping operations from qcom_scm_qseecom_app_send() and
convert all users of it in the qseecom module to using the TZ allocator
for creating SCM call buffers. As this is largely a module separate from
the SCM driver, let's use a separate memory pool. Set the initial size to
4K and - if we run out - add twice the current amount to the pool.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Amirreza Zarrabi <quic_azarrabi@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-9-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Let's use the new TZ memory allocator to obtain a buffer for this call
instead of manually kmalloc()ing it and then mapping to physical space.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-8-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Let's use the new TZ memory allocator to obtain a buffer for this call
instead of using dma_alloc_coherent().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-7-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Let's use the new TZ memory allocator to obtain a buffer for this call
instead of using dma_alloc_coherent().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-6-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Let's use the new TZ memory allocator to obtain a buffer for this call
instead of using dma_alloc_coherent().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-5-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We need to allocate, map and pass a buffer to the trustzone if we have
more than 4 arguments for a given SCM call. Let's use the new TrustZone
allocator for that memory and shrink the code in process.
As this code lives in a different compilation unit than the rest of the
SCM code, we need to provide a helper in the form of
qcom_scm_get_tzmem_pool() that allows the SMC low-level routines to
access the SCM memory pool.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-4-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Select the TrustZone memory allocator in Kconfig and create a pool of
memory shareable with the TrustZone when probing the SCM driver.
This will allow a gradual conversion of all relevant SCM calls to using
the dedicated allocator.
The policy used for the pool is "on-demand" and the initial size is 0
as - depending on the config - it's possible that no SCM calls needing
to allocate memory will be called. The sizes of possible allocations also
vary substiantially further warranting the "on-demand" approach.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-3-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We have several SCM calls that require passing buffers to the TrustZone
on top of the SMC core which allocates memory for calls that require
more than 4 arguments.
Currently every user does their own thing which leads to code
duplication. Many users call dma_alloc_coherent() for every call which
is terribly unperformant (speed- and size-wise).
Provide a set of library functions for creating and managing pools of
memory which is suitable for sharing with the TrustZone, that is:
page-aligned, contiguous and non-cachable as well as provides a way of
mapping of kernel virtual addresses to physical space.
Make the allocator ready for extending with additional modes of operation
which will allow us to support the SHM bridge safety mechanism once all
users convert.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-2-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are seven oneline patches that each address a distinct problem
on the NXP i.MX platform, mostly the popular i.MX8M variant.
The only other two fixes are for error handling on the psci
firmware driver and SD card support on the milkv duo riscv
board.
-----BEGIN PGP SIGNATURE-----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=0mtC
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are seven oneline patches that each address a distinct problem
on the NXP i.MX platform, mostly the popular i.MX8M variant.
The only other two fixes are for error handling on the psci firmware
driver and SD card support on the milkv duo riscv board"
* tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: psci: Fix return value from psci_system_suspend()
riscv: dts: sophgo: disable write-protection for milkv duo
arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
arm64: dts: freescale: imx8mm-verdin: Fix GPU speed
This will used by drm/msm to initialize GPU registers that Qualcomm's
firmware doesn't make writeable to the kernel.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240430-a750-raytracing-v3-2-7f57c5ac082d@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently we return the value from invoke_psci_fn() directly as return
value from psci_system_suspend(). It is wrong to send the PSCI interface
return value directly. psci_to_linux_errno() provide the mapping from
PSCI return value to the one that can be returned to the callers within
the kernel.
Use psci_to_linux_errno() to convert and return the correct value from
psci_system_suspend().
Fixes: faf7ec4a92 ("drivers: firmware: psci: add system suspend support")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240515095528.1949992-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Ensure that EFI runtime services are not unmapped by PAN on ARM
- Avoid freeing the memory holding the EFI memory map inadvertently on
x86
- Avoid a false positive kmemleak warning on arm64
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZm1QFgAKCRAwbglWLn0t
XDCpAP9tB6S9uQwDsR9PuxJfWOALJEqoMWCjGzLjt5HlGePlvAD9HaltvkT5p9Ff
TkfP4Ivl29BtuaNBIFGEiC6KJXETawc=
=Tvsr
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Another small set of EFI fixes. Only the x86 one is likely to affect
any actual users (and has a cc:stable), but the issue it fixes was
only observed in an unusual context (kexec in a confidential VM).
- Ensure that EFI runtime services are not unmapped by PAN on ARM
- Avoid freeing the memory holding the EFI memory map inadvertently
on x86
- Avoid a false positive kmemleak warning on arm64"
* tag 'efi-fixes-for-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/arm64: Fix kmemleak false positive in arm64_efi_rt_init()
efi/x86: Free EFI memory map only when installing a new one.
efi/arm: Disable LPAE PAN when calling EFI runtime services
The logic in __efi_memmap_init() is shared between two different
execution flows:
- mapping the EFI memory map early or late into the kernel VA space, so
that its entries can be accessed;
- the x86 specific cloning of the EFI memory map in order to insert new
entries that are created as a result of making a memory reservation
via a call to efi_mem_reserve().
In the former case, the underlying memory containing the kernel's view
of the EFI memory map (which may be heavily modified by the kernel
itself on x86) is not modified at all, and the only thing that changes
is the virtual mapping of this memory, which is different between early
and late boot.
In the latter case, an entirely new allocation is created that carries a
new, updated version of the kernel's view of the EFI memory map. When
installing this new version, the old version will no longer be
referenced, and if the memory was allocated by the kernel, it will leak
unless it gets freed.
The logic that implements this freeing currently lives on the code path
that is shared between these two use cases, but it should only apply to
the latter. So move it to the correct spot.
While at it, drop the dummy definition for non-x86 architectures, as
that is no longer needed.
Cc: <stable@vger.kernel.org>
Fixes: f0ef652347 ("efi: Fix efi_memmap_alloc() leaks")
Tested-by: Ashish Kalra <Ashish.Kalra@amd.com>
Link: https://lore.kernel.org/all/36ad5079-4326-45ed-85f6-928ff76483d3@amd.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
On some systems the SCMI platform to agent(p2a) communication can be fully
interrupt driven. The notification(p2a) channel needs completion interrupt
to drive its notification queue at the platform. Without it, the platform
notification will not work as the platform will wait for agent indication
of clearing the channel via interrupt unlike few platforms which can poll
instead.
To support such systems, an optional unidirectional mailbox channel for
p2a reply communication. If the platform sets channel INTR flag set
indicating that it expects the agent to trigger the interrupt to acknowledge
the reciept of the notification or any p2a message, and the completion
interrupt channel is provided, send a mailbox message to the platform
after the p2a message is read and channel is freed to accept new
notifications or p2a messages.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240510-scmi-notify-v2-2-e994cf14ef86@nxp.com
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI supports system suspend notification from the platform. The suuport
for the same can be added in SCMI power control driver. However, currently
there is no way to pass suspend level to pm_suspend() call from this
driver, so use suspend-to-ram(S2R) will be used.
Couple of things to note:
1) The userspace can still configure whatever default behaviour expected
for S2R.
2) The userspace needs to keep the wakeup source enabled, otherwise the
system may never resume back.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240428075105.2187837-1-peng.fan@oss.nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/gsmi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/coreboot_table.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/framebuffer-coreboot.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/memconsole.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/memconsole-coreboot.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/memconsole-x86-legacy.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/cbmem.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/vpd-sysfs.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240605-md-drivers-firmware-google-v1-1-18878de97fa5@quicinc.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The current arm32 architecture does not yet support the
HAVE_LD_DEAD_CODE_DATA_ELIMINATION feature. arm32 is widely used in
embedded scenarios, and enabling this feature would be beneficial for
reducing the size of the kernel image.
In order to make this work, we keep the necessary tables by annotating
them with KEEP, also it requires further changes to linker script to KEEP
some tables and wildcard compiler generated sections into the right place.
When using ld.lld for linking, KEEP is not recognized within the OVERLAY
command, and Ard proposed a concise method to solve this problem.
It boots normally with defconfig, vexpress_defconfig and tinyconfig.
The size comparison of zImage is as follows:
defconfig vexpress_defconfig tinyconfig
5137712 5138024 424192 no dce
5032560 4997824 298384 dce
2.0% 2.7% 29.7% shrink
When using smaller config file, there is a significant reduction in the
size of the zImage.
We also tested this patch on a commercially available single-board
computer, and the comparison is as follows:
a15eb_config
2161384 no dce
2092240 dce
3.2% shrink
The zImage size has been reduced by approximately 3.2%, which is 70KB on
2.1M.
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
There's a bunch of structs created and freed every time the mailbox is
used. Move them to use the scope-based cleanup infrastructure to avoid
manually tearing them down. mpfs_auto_update_available() didn't free the
memory that it used (albeit it allocated exactly once during probe) so
that gets moved over too.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
This buffer is used exclusively by mpfs_auto_update_set_image_address(),
so move the management of it there, employing the recently added cleanup
infrastructure to avoid littering the function with gotos.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The EFI runtime wrappers are a sandbox for calling into EFI runtime
services, which are invoked using indirect calls. When running with kCFI
enabled, the compiler will require the target of any indirect call to be
type annotated.
Given that the EFI runtime services prototypes and calling convention
are governed by the EFI spec, not the Linux kernel, adding such type
annotations for firmware routines is infeasible, and so the compiler
must be informed that prototype validation should be omitted.
Add the __nocfi annotation at the appropriate places in the EFI runtime
wrapper code to achieve this.
Note that this currently only affects 32-bit ARM, given that other
architectures that support both kCFI and EFI use an asm wrapper to call
EFI runtime services, and this hides the indirect call from the
compiler.
Fixes: 1a4fec49ef ("ARM: 9392/2: Support CLANG CFI")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move FIRMWARE_VERSION_MASK macro to xlnx-zynqmp.h so that other
drivers can use it for verifying the supported firmware version.
Signed-off-by: Ronak Jain <ronak.jain@amd.com>
Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20240425095913.919390-1-ronak.jain@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Currently kernel entry in head.S is in DMW address range, firmware is
instructed to jump to this address after loading the kernel image.
However kernel should not make any assumption on firmware's DMW
setting, thus the entry point should be a physical address falls into
direct translation region.
Fix by converting entry address to physical and amend entry calculation
logic in libstub accordingly.
BTW, use ABSOLUTE() to calculate variables to make Clang/LLVM happy.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Make the FF-A bus on its own as a distinct module initialized at
subsys_initcall level when builtin.
Keep the FF-A driver core stack, together with any configured transport,
in a different module initialized as module_init level.
FF-A drivers initialization is now changed to module_init level.
Acked-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240515094028.1947976-2-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently FF-A bus ffa_device_match() handles the workaround for the
FF-A v1.0 devices which are not populated with UUID to match. The FF-A
bus layer calls into FF-A driver and populates the device UUID if it
matches with the driver attempting to match.
But this forces to have both FF-A bus and core driver to be bundled into
a single module. However, keep it as a single module adds problems for
the FF-A driver registrations and their initcall levels.
In preparation to split the FF-A bus and the core driver into distinct
modules, we need to move the workaround away from the FF-A bus layer.
We can add it into the FF-A core driver as a bus notifier.
In order to do so, we need to always match any driver with the device if
the UUID is NULL and then during the driver binding phase, we can populate
the UUID if it matches with the driver UUID table using the bus notifiers.
We also need to add a check for NULL UUID before calling the device/driver
probe as devices with NULL UUID is possible since we match all for that
case.
Acked-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240515094028.1947976-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This flag was never supported by firmware, so remove it.
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240514180046.543763-1-quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As with previous platforms, qseecom and the uefisecapp provides access
to EFI variables. Add X1E CRD and QCP devices to the allowlist.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240523-x1e-efivarfs-v1-1-5d986265b8e4@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Several new features here:
- virtio-net is finally supported in vduse.
- Virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmZN570PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp2JUH/1K3fZOHymop6Y5Z3USFS7YdlF+dniedY/vg
TKyWERkXOlxq1d9DVxC0mN7tk72DweuWI0YJjLXofrEW1VuW29ecSbyFXxpeWJls
b7ErffxDAFRas5jkMCngD8TuFnbEegU0mGP5kbiHpEndBydQ2hH99Gg0x7swW+cE
xsvU5zonCCLwLGIP2DrVrn9qGOHtV6o8eZfVKDVXfvicn3lFBkUSxlwEYsO9RMup
aKxV4FT2Pb1yBicwBK4TH1oeEXqEGy1YLEn+kAHRbgoC/5L0/LaiqrkzwzwwOIPj
uPGkacf8CIbX0qZo5EzD8kvfcYL1xhU3eT9WBmpp2ZwD+4bINd4=
=nax1
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
Right now efi-pstore either returns 0 (success) or -EIO; but we
do have a function to convert UEFI errors in different standard
error codes, helping to narrow down potential issues more accurately.
So, let's use this helper here.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When building ARCH=loongarch defconfig + CONFIG_UNWINDER_ORC=y using
LLVM, there is a warning from ld.lld when linking the EFI zboot image
due to the use of unreachable() in number() in vsprintf.c:
ld.lld: warning: drivers/firmware/efi/libstub/lib.a(vsprintf.stub.o):(.discard.unreachable+0x0): has non-ABS relocation R_LARCH_32_PCREL against symbol ''
If the compiler cannot eliminate the default case for any reason, the
.discard.unreachable section will remain in the final binary but the
entire point of any section prefixed with .discard is that it is only
used at compile time, so it can be discarded via /DISCARD/ in a linker
script. The asm-generic vmlinux.lds.h includes .discard and .discard.*
in the COMMON_DISCARDS macro but that is not used for zboot.lds, as it
is not a kernel image linker script.
Add .discard and .discard.* to /DISCARD/ in zboot.lds, so that any
sections meant to be discarded at link time are not included in the
final zboot image. This issue is not specific to LoongArch, it is just
the first architecture to select CONFIG_OBJTOOL, which defines
annotate_unreachable() as an asm statement to add the
.discard.unreachable section, and use the EFI stub.
Closes: https://github.com/ClangBuiltLinux/linux/issues/2023
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in here
are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally.
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3+hQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylfTwCfUyHWkDZuZ7ehdtjzfmcd4EKZBK8An3AAV99G
ox8PXMxuFTaUEdT/69FQ
=2sEo
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in
here are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Fix a typo in the description of device_get_child_node_count()
kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
scsi: Use device_show_string() helper for sysfs attributes
platform/x86: Use device_show_string() helper for sysfs attributes
perf: Use device_show_string() helper for sysfs attributes
IB/qib: Use device_show_string() helper for sysfs attributes
hwmon: Use device_show_string() helper for sysfs attributes
driver core: Add device_show_string() helper for sysfs attributes
treewide: Use sysfs_bin_attr_simple_read() helper
sysfs: Add sysfs_bin_attr_simple_read() helper
module: don't ignore sysfs_create_link() failures
driver core: Remove unused platform_notify, platform_notify_remove
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-11-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
- Followup fix for the EFI boot sequence refactor, which may result in
physical KASLR putting the kernel in a region which is being used for
a special purpose via a command line argument.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZks6+wAKCRAwbglWLn0t
XCJzAQCOgl1bhfwU14U0KNjboeCcQKYrvD/6AmqM/UBsQyfB4gD+NuEAh2iKldeS
+5DuaWE3/sMPrZlTpatNF5E99mu2uAQ=
=Um+v
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
- Followup fix for the EFI boot sequence refactor, which may result in
physical KASLR putting the kernel in a region which is being used for
a special purpose via a command line argument.
* tag 'efi-fixes-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Omit physical KASLR when memory reservations exist
* KCFI violation fix for dmi-id.
* Stop decoding on broken (short) DMI table entry.
* Print info about populated memory slots at boot.
-----BEGIN PGP SIGNATURE-----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=088k
-----END PGP SIGNATURE-----
Merge tag 'dmi-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull dmi updates from Jean Delvare:
"Bug fixes:
- KCFI violation in dmi-id
- stop decoding on broken (short) DMI table entry
New features:
- print info about populated memory slots at boot"
* tag 'dmi-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi: Add info message for number of populated and total memory slots
firmware: dmi: Stop decoding on broken entry
firmware: dmi-id: add a release callback function
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent
code generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
-----BEGIN PGP SIGNATURE-----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=D5B/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
The legacy decompressor has elaborate logic to ensure that the
randomized physical placement of the decompressed kernel image does not
conflict with any memory reservations, including ones specified on the
command line using mem=, memmap=, efi_fake_mem= or hugepages=, which are
taken into account by the kernel proper at a later stage.
When booting in EFI mode, it is the firmware's job to ensure that the
chosen range does not conflict with any memory reservations that it
knows about, and this is trivially achieved by using the firmware's
memory allocation APIs.
That leaves reservations specified on the command line, though, which
the firmware knows nothing about, as these regions have no other special
significance to the platform. Since commit
a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
these reservations are not taken into account when randomizing the
physical placement, which may result in conflicts where the memory
cannot be reserved by the kernel proper because its own executable image
resides there.
To avoid having to duplicate or reuse the existing complicated logic,
disable physical KASLR entirely when such overrides are specified. These
are mostly diagnostic tools or niche features, and physical KASLR (as
opposed to virtual KASLR, which is much more important as it affects the
memory addresses observed by code executing in the kernel) is something
we can live without.
Closes: https://lkml.kernel.org/r/FA5F6719-8824-4B04-803E-82990E65E627%40akamai.com
Reported-by: Ben Chaney <bchaney@akamai.com>
Fixes: a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Cc: <stable@vger.kernel.org> # v6.1+
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
This one became bigger than usual, not in the total size but rather
containing lots of small changes all over the places. The majority of
changes are about ASoC, especially SOF / Intel stuff, and we see an
interesting work for ASoC DAPM graph visualization, while there are
many other code cleanup and refactoring, too.
Core:
- A deadlock fix at device disconnection
- A new tool dapm-graph for visualising the DAPM state
ASoC:
- Large updates throughout the Intel audio drivers
- Fixes and clarifications for the DAPM documentation
- Cleanups of accessors for driver data, module labelling, and for
constification
- Modernsation and cleanup work in the Mediatek drivers
- Several fixes and features for the DaVinci I2S driver
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240
HD-audio:
- Cleanup for CONFIG_PM dependencies
- Cirrus HD-audio codec fixes and quirks
Others:
- Series of tree-wide fixes in Makefiles to use *-y
- Additions of missing module descriptions
- Scarlett2 USB mixer enhancements
- A series of legacy emu10k1 fixes and improvements
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmZDUAMOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE9JBQ/+Olao659gDL04WLoxe7oarGsWR7CXjptI72Xa
z+DFKT7lSpd1olQvAp9uWswM5wURSJzvJUZh0DPMpttfhvWcpCpa7fjbYaDZzsF1
mOwtx9Wpxo8t5FZY3gaAxtCVZikZEWIA1LOyEcyh01Ki3tdfwDUoAB3zyOSDRbBL
NHga8/HP+uxgEIn6HKkbPH18u9E96ZiEVvzUD+K4AFsECzFv50eUik+YKJEo/+1M
yVTdZHdtwz2nuaShJjf49Db00Xi36FcpDKuQHM0UPGyifv4Emq99AulpQlDR3VCs
fzrQP2TQsdiwXDriOAW9Dnr6fpnFQjAeBMaFJgkJs6akV88Lldwkh2SdflQwxXLx
YCi0aYEIYVBDxLw1VrksdlqIK6+E3yuxIoXqyzkoZlh8HhtvFQHAtfX4KaZSnXA4
XCR1qHvm4oqpGEeMisiSEnk+m9lqfk7nm5ny0CBedaoD5SjTiI2WdXTWvlOnDmLo
kAvhlioz7jFiJ9z7lhJGId7uRgKIRmVCdDxmQN1P4eTLd7g0rAuBsnFsS+rd+Rxk
Nw4AmyDhTqMm6IJyefLP1CTXg3xgVwXLyHk7/Q7fv1Ht8M+vLbDT73MHNQK5O8kK
h4jKXISFSurw2ehLCqRkNJl3BisWSiZxOZB7JGG1le2FjtDB38CGaiWfAW9014cg
+FbBZ3E=
=YKT4
-----END PGP SIGNATURE-----
Merge tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This one became bigger than usual, not in the total size but rather
containing lots of small changes all over the places.
The majority of changes are about ASoC, especially SOF / Intel stuff,
and we see an interesting work for ASoC DAPM graph visualization,
while there are many other code cleanup and refactoring, too.
Core:
- A deadlock fix at device disconnection
- A new tool dapm-graph for visualising the DAPM state
ASoC:
- Large updates throughout the Intel audio drivers
- Fixes and clarifications for the DAPM documentation
- Cleanups of accessors for driver data, module labelling, and for
constification
- Modernsation and cleanup work in the Mediatek drivers
- Several fixes and features for the DaVinci I2S driver
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240
HD-audio:
- Cleanup for CONFIG_PM dependencies
- Cirrus HD-audio codec fixes and quirks
Others:
- Series of tree-wide fixes in Makefiles to use *-y
- Additions of missing module descriptions
- Scarlett2 USB mixer enhancements
- A series of legacy emu10k1 fixes and improvements"
* tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (603 commits)
ALSA: hda/realtek: Drop doubly quirk entry for 103c:8a2e
ALSA: hda/realtek - fixed headset Mic not show
ASoC: SOF: amd: Fix build error with built-in config
ALSA: scarlett2: Increase mixer range to +12dB
ALSA: scarlett2: Add S/PDIF source selection controls
ALSA: core: Remove superfluous CONFIG_PM
ALSA: Fix deadlocks with kctl removals at disconnection
ASoC: audio-graph-card2: call of_node_get() before of_get_next_child()
ASoC: SOF: amd: Correct spaces in Makefile
ASoC: rt715-sdca-sdw: Fix wrong complete waiting in rt715_dev_resume()
ASoC: Intel: sof_sdw_rt_amp: use dai parameter
ASoC: Intel: sof_sdw: add dai parameter to rtd_init callback
ASoC: Intel: sof_sdw: use .controls/.widgets to add controls/widgets
ASoC: Intel: sof_sdw: add controls and dapm widgets in codec_info
ASoC: Intel: sof_sdw: use generic name for controls/widgets
ASoC: Intel: sof_sdw_cs_amp: rename Speakers to Speaker
ASoC: Intel: maxim-common: change max98373 data to static
ASoC: Intel: sof_sdw: add max98373 dapm routes
ASoC: Intel: sof_rt5682: use max_98373_dai_link function
ASoC: Intel: sof_nau8825: use max_98373_dai_link function
...
- Additional cleanup by Tim for the efivarfs variable name length
confusion
- Avoid freeing a bogus pointer when virtual remapping is omitted in the
EFI boot stub
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZkMPmAAKCRAwbglWLn0t
XNw2AQC96tWvh7piDGw2LTGp4zqRcoe2LV09hNE8rgk63g+2LgEA81TOhEKwpeie
23GI9WiEABdRT8kt6ebuVatfzrn5jgk=
=8la7
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Only a handful of changes this cycle, consisting of cleanup work and a
low-prio bugfix:
- Additional cleanup by Tim for the efivarfs variable name length
confusion
- Avoid freeing a bogus pointer when virtual remapping is omitted in
the EFI boot stub"
* tag 'efi-next-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: libstub: only free priv.runtime_map when allocated
efi: Clear up misconceptions about a maximum variable name size
efivarfs: Remove unused internal struct members
Documentation: Mark the 'efivars' sysfs interface as removed
efi: pstore: Request at most 512 bytes for variable names
- Rework the handling of disabled turbo in the intel_pstate driver and
make it update the maximum CPU frequency consistently regardless of
the reason on top of a number of cleanups (Rafael Wysocki).
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar).
- Prevent pulicy->max from going above the frequency QoS maximum value
when cpufreq_frequency_table_verify() is used (Xuewen Yan).
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong).
- Update MAINTAINERS entry for amd-pstate to add two new submaintainers
and a designated reviewer (Huang Rui).
- Clean up the amd-pstate driver and update its documentation (Gautham
Shenoy).
- Fix the highest frequency issue in the amd-pstate driver which limits
performance (Perry Yuan).
- Enable CPPC v2 for certain processors in the family 17H, as requested
by TR40 processor users who expect improved performance and lower
system temperature (Perry Yuan).
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan).
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have CPPC
v2 capability (Perry Yuan).
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar).
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin).
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta).
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens).
- mediatek cpufreq: Add support for MT7988A (Sam Shih).
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei Fan).
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate cpufreq
driver (Jeff Johnson).
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson).
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li).
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt).
- Use %ps to simplify debug output in the core system-wide suspend and
resume code (Len Brown).
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole).
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui).
- Add support for ArrowLake-H platform to the Intel RAPL driver (Zhang
Rui).
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li).
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba).
- Remove a reference to a function that has been dropped from the power
management documentation (Bjorn Helgaas).
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König).
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon).
-----BEGIN PGP SIGNATURE-----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=el5Y
-----END PGP SIGNATURE-----
Merge tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly cpufreq updates, including a significant intel-pstate
driver update and several amd-pstate improvements plus some updates of
ARM cpufreq drivers, general fixes and cleanups.
Also included are changes related to system sleep, power capping
updates adding support for a new platform and a new hardware feature
(among other things), a Samsung exynos-asv driver update allowing it
to change its Energy Model after adjusting voltage, minor cpuidle and
devfreq updates and a small documentation cleanup.
Specifics:
- Rework the handling of disabled turbo in the intel_pstate driver
and make it update the maximum CPU frequency consistently
regardless of the reason on top of a number of cleanups (Rafael
Wysocki)
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar)
- Prevent pulicy->max from going above the frequency QoS maximum
value when cpufreq_frequency_table_verify() is used (Xuewen Yan)
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong)
- Update MAINTAINERS entry for amd-pstate to add two new
submaintainers and a designated reviewer (Huang Rui)
- Clean up the amd-pstate driver and update its documentation
(Gautham Shenoy)
- Fix the highest frequency issue in the amd-pstate driver which
limits performance (Perry Yuan)
- Enable CPPC v2 for certain processors in the family 17H, as
requested by TR40 processor users who expect improved performance
and lower system temperature (Perry Yuan)
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan)
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have
CPPC v2 capability (Perry Yuan)
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar)
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin)
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta)
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens)
- mediatek cpufreq: Add support for MT7988A (Sam Shih)
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei
Fan)
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate
cpufreq driver (Jeff Johnson)
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson)
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li)
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt)
- Use %ps to simplify debug output in the core system-wide suspend
and resume code (Len Brown)
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole)
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui)
- Add support for ArrowLake-H platform to the Intel RAPL driver
(Zhang Rui)
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li)
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba)
- Remove a reference to a function that has been dropped from the
power management documentation (Bjorn Helgaas)
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König)
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon)"
* tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void
PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning void
PM / devfreq: mtk-cci: Convert to platform remove callback returning void
PM / devfreq: exynos-ppmu: Convert to platform remove callback returning void
PM / devfreq: exynos-nocp: Convert to platform remove callback returning void
cpufreq: amd-pstate: fix the highest frequency issue which limits performance
cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
cpuidle: ladder: fix ladder_do_selection() kernel-doc
powercap: intel_rapl_tpmi: Enable PMU support
powercap: intel_rapl: Introduce APIs for PMU support
PM: hibernate: replace deprecated strncpy() with strscpy()
cpufreq: Fix up printing large CPU numbers and frequency values
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
...
Now Kbuild provides reasonable defaults for objtool, sanitizers, and
profilers.
Remove redundant variables.
Note:
This commit changes the coverage for some objects:
- include arch/mips/vdso/vdso-image.o into UBSAN, GCOV, KCOV
- include arch/sparc/vdso/vdso-image-*.o into UBSAN
- include arch/sparc/vdso/vma.o into UBSAN
- include arch/x86/entry/vdso/extable.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso-image-*.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso32-setup.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vma.o into GCOV, KCOV
- include arch/x86/um/vdso/vma.o into KASAN, GCOV, KCOV
I believe these are positive effects because all of them are kernel
space objects.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
As part of adding support for calling i2c_register_spd() on muxed SMBUS
segments the same message has been removed from i2c_register_spd().
However users may find it useful, therefore reintroduce it as part of
the DMI scan code.
[JD: Static variable dmi_memdev_populated_nr is only used in __init
functions, so it can be marked __initdata.]
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
* Improvements
- Set driver owner in the core registration so that coreboot drivers
don't need to set it individually.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZj2VQBMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0CO8A/iD11kx8c54DChTRZ1x/1kpVkp8GOxTp
guS584xIy29CAQDeHTATY5YVEfff3pH3sggQE+60+gLgtRD6pW5CUE6SAg==
=3GxW
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-firmware-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware updates from Tzung-Bi Shih:
- Set driver owner in the core registration so that coreboot drivers
don't need to set it individually
* tag 'tag-chrome-platform-firmware-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: google: cbmem: drop driver owner initialization
firmware: coreboot: store owner from modules with coreboot_driver_register()
Merge cpufreq updates for 6.10:
- Rework the handling of disabled turbo in the intel_pstate driver and
make it update the maximum CPU frequency consistently regardless of
the reason on top of a number of cleanups (Rafael Wysocki).
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar).
- Prevent pulicy->max from going above the frequency QoS maximum value
when cpufreq_frequency_table_verify() is used (Xuewen Yan).
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong).
- Update MAINTAINERS entry for amd-pstate to add two new submaintainers
and a designated reviewer (Huang Rui).
- Clean up the amd-pstate driver and update its documentation (Gautham
Shenoy).
- Fix the highest frequency issue in the amd-pstate driver which limits
performance (Perry Yuan).
- Enable CPPC v2 for certain processors in the family 17H, as requested
by TR40 processor users who expect improved performance and lower
system temperature (Perry Yuan).
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan).
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have CPPC
v2 capability (Perry Yuan).
- Sun50i: Add support for opp_supported_hw, H616 platform and general
cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi, Dan
Carpenter, Viresh Kumar).
- CPPC: Fix possible null pointer dereference (Aleksandr Mishin).
- Eliminate uses of of_node_put() (Javier Carrasco, and Shivani Gupta).
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens).
- mediatek: Add support for MT7988A (Sam Shih).
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei Fan).
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate cpufreq
driver (Jeff Johnson).
* pm-cpufreq: (46 commits)
cpufreq: amd-pstate: fix the highest frequency issue which limits performance
cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
cpufreq: Fix up printing large CPU numbers and frequency values
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
cpufreq: amd-pstate: Remove amd_get_{min,max,nominal,lowest_nonlinear}_freq()
cpufreq: amd-pstate: Unify computation of {max,min,nominal,lowest_nonlinear}_freq
cpufreq: amd-pstate: Document the units for freq variables in amd_cpudata
cpufreq: amd-pstate: Document *_limit_* fields in struct amd_cpudata
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM4450 compatibles
cpufreq: sun50i: fix error returns in dt_has_supported_hw()
cpufreq: brcmstb-avs-cpufreq: ISO C90 forbids mixed declarations
cpufreq: dt-platdev: eliminate uses of of_node_put()
cpufreq: dt: eliminate uses of of_node_put()
cpufreq: ti: Implement scope-based cleanup in ti_cpufreq_match_node()
...
As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them. Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is
used to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts
and indirect messaging, SCMI firmware support for pin control
and vendor specific interfaces, and TEE firmware interface
changes across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan
k230 support
- Multiple minor updates for the TI sysc bus driver, memory controllers,
hisilicon hccs and more
-----BEGIN PGP SIGNATURE-----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=4rf0
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
The updates this time are a bit smaller than most times, mainly because
it is not totally dominated by new Qualcomm hardware support. Instead,
we larger than average updates for Rockchips, NXP, Allwinner and TI.
The only two new SoCs this time are both from NXP and are minor variants
of already supported ones.
The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out fine.
New machines this time contain:
- two Broadcom SoC based wireless routers from Asus
- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications
- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V
- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs
- six rockchips boards including another handheld game console
and a few single-board computers
On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines.
-----BEGIN PGP SIGNATURE-----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=SnV4
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"The updates this time are a bit smaller than most times, mainly
because it is not totally dominated by new Qualcomm hardware support.
Instead, we larger than average updates for Rockchips, NXP, Allwinner
and TI. The only two new SoCs this time are both from NXP and are
minor variants of already supported ones.
The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out
fine.
New machines this time contain:
- two Broadcom SoC based wireless routers from Asus
- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications
- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V
- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs
- six rockchips boards including another handheld game console and a
few single-board computers
On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines"
* tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (612 commits)
arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address
arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells
arm64: dts: marvell: eDPU: drop redundant address/size-cells
arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible
arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
arm64: dts: rockchip: enable onboard spi flash for rock-3a
arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5
arm64: dts: rockchip: Enable GPU on Orange Pi 5
arm64: dts: rockchip: enable GPU on khadas-edge2
arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board
arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module
arm64: dts: rockchip: Add Radxa ROCK 3C
dt-bindings: arm: rockchip: add Radxa ROCK 3C
arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl
arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2
arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]
arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive
arm64: dts: Add/fix /memory node unit-addresses
arm64: dts: qcom: qcs404: fix bluetooth device address
arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader
...
These are a couple of last minute fixes that came in over the
previous week, addressing:
- A pin configuration bug on a qualcomm board that caused
issues with ethernet and mmc.
- Two minor code fixes for misleading console output in the
microchip firmware driver.
- A build warning in the sifive cache driver
-----BEGIN PGP SIGNATURE-----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=CxgC
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are a couple of last minute fixes that came in over the previous
week, addressing:
- A pin configuration bug on a qualcomm board that caused issues with
ethernet and mmc
- Two minor code fixes for misleading console output in the microchip
firmware driver
- A build warning in the sifive cache driver"
* tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: microchip: clarify that sizes and addresses are in hex
firmware: microchip: don't unconditionally print validation success
arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration
cache: sifive_ccache: Silence unused variable warning
This fixes a sleep-while-atomic issue in pmic_glink, stemming from the
fact that the GLINK callback comes from interrupt context.
It fixes the Bluetooth address in the example of qcom,wcnss, and it
enables UEFI variables on SC8180X devices (Primus and Flex 5G).
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmY63o4VHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FgOgQAMl9EWX6GgsIZKIs70s5gfbVYh+0
gtyT829P4Gg1Jq4QSxpGvUJUNRxUCRZ+XpRi/tkagDljudUS1WsRfg0lqdJ9mXw6
zu0/8rjGpNbd2PLjFJVTSJ0MrmBSko0DTFcIdBuWK/Unq+QY1Du8Qrf7wa9w/of6
wBf7dxlMz2zO2U/A57TEtuvB4WN5p7tOm0p7vXC5YZsnwmGjauq2ppXY2tJAQZfr
b7APS7DsVHKHjEPfXFqjl4j+W+e+4YJTbysp5fP+lz4vZXrcnDXHkhFBtQ6pD/g+
qHLMKYSRhw5O/7hUQCrs8v2sX/okLmjHg1aZzo32TlfiibY8cOF7oWCH9yPcHh3Y
pBjTfG17LT3MLZMn8GgAz2Idvp/k+ORnJ/4cDvfB2cs9SluOPp4DM05Yc0a5aG4Q
AmFhbbWMdauDsoL3URTPQwv4vDU7hOugNHGFwAgAoS5LPZfOG+fVty1jcWzNBiHK
xc2gnHQ7JsO0wCoFdEticbkYazNjbIXQEdllcxX8q+JdOvgybCY6oLH9sDPQMl9C
T92enUt7FEvd2UAjWtaE3ALB6irP7miRbgRzfjqluiQ0woSNGurH2EOAU21GO0ER
e+UpyOcB/Sks9fq3e6KJsNbYzpZI9mw+b+dff5FFY6nEVnrMlA13aEy2oX4fDu6S
tPhM6XeikIh6jx8D
=rvvf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CB3q
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
A few more Qualcomm driver updates for v6.10
This fixes a sleep-while-atomic issue in pmic_glink, stemming from the
fact that the GLINK callback comes from interrupt context.
It fixes the Bluetooth address in the example of qcom,wcnss, and it
enables UEFI variables on SC8180X devices (Primus and Flex 5G).
* tag 'qcom-drivers-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
Link: https://lore.kernel.org/r/20240508020900.204413-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Avoid triggering the softlockup watchdog when accepting large chunks
of memory from the hypervisor
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZjS4yAAKCRAwbglWLn0t
XIOQAPkBZlRdhlbegKjguyvVk9S6EKAgA1j94L/gK8ZL9olbUwD/fEuBIm+U2wtv
Ntulu0l5kiHSJzC8lwsUdtUSd+ovUQg=
=o5dU
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"This works around a shortcoming in the memory acceptation API, which
may apparently hog the CPU for long enough to trigger the softlockup
watchdog.
Note that this only affects confidential VMs running under the Intel
TDX hypervisor, which is why I accepted this for now, but this should
obviously be fixed properly in the future"
* tag 'efi-urgent-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: touch soft lockup during memory accept
Testing indicates that qseecom and uefisecapp are working on both the
SC8180X Primus and Lenovo Flex 5G, providing EFI variable access.
Add the two to the allow list.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240430-uefisecapp-allowlist-sc8180x-v1-1-1a626ea9c5f1@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If a DMI table entry is shorter than 4 bytes, it is invalid. Due to
how DMI table parsing works, it is impossible to safely recover from
such an error, so we have to stop decoding the table.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/linux-kernel/Zh2K3-HLXOesT_vZ@liuwe-devbox-debian-v2/T/
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
firmware:
Two changes for misleading printouts from the auto update driver, one
for an erroneous success message and the other to make it clear
addresses are in hex.
cache:
Samuel's fix for the ccache driver left an unused variable, so he
sent a follow up patch to silence that complaint.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZiza9gAKCRB4tDGHoIJi
0ilxAQCxhcflEAdPdRBjyqfzsex66mCIhLcoUYSvnjEuLv/7QgD/bpLaXPKsUS57
YcZ0Bqoxghi65Y0hjL0XUbrF375AwAM=
=TQN3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=XAYv
-----END PGP SIGNATURE-----
Merge tag 'riscv-soc-fixes-for-v6.9-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V SoC driver fixes for v6.9-rc6
firmware:
Two changes for misleading printouts from the auto update driver, one
for an erroneous success message and the other to make it clear
addresses are in hex.
cache:
Samuel's fix for the ccache driver left an unused variable, so he
sent a follow up patch to silence that complaint.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.9-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: clarify that sizes and addresses are in hex
firmware: microchip: don't unconditionally print validation success
cache: sifive_ccache: Silence unused variable warning
Link: https://lore.kernel.org/r/20240427-unflawed-humorless-690472f9c5a0@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 6.10, please pull the following:
- Laurent converts the Raspberry Pi firmware DT binding to YAML, updates
the firmware driver to use the proper 'struct device' reference for
DMA mappings and drops unneeded properties from the DT node and
finishes by removing the duplicate firmware-clocks property to
bcm2835-rpi.dtsi. He also added support for the CAM1 camera interface
regulator.
- Uwe adds a pinctrl-based multiplexing description to allow the use of
I2C0 pins to allow usage between the 40-pin Raspberry Pi header and
the CSI and DSI connectors. He then describes the PCF85063 RTC device
available on the CM4 I/O board making use of that pinctrl-based
muxing.
- Arinc updates the Asus RT-AC3100 and RT-AC88U DTs to have proper LED
colors and function properties, NVMEM MAC addresses and removes
duplicates and unnecessary properties and does a few Device Tree
cleanups.. He then adds support for the Asus RT-AC3200 (BCM4709-based)
and RT-AC3500 routers.
- Jean-Michel adds DT nodes for the CSI Unicam camera interfaces on the
Raspberry Pi 4 / BCM2711 SoCs
- Florian adds support for the Ethernet LEDs on Raspberry Pi 4 B and
Raspberry Pi 4 CM boards.
-----BEGIN PGP SIGNATURE-----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=400A
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=L8Aj
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.10/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.10, please pull the following:
- Laurent converts the Raspberry Pi firmware DT binding to YAML, updates
the firmware driver to use the proper 'struct device' reference for
DMA mappings and drops unneeded properties from the DT node and
finishes by removing the duplicate firmware-clocks property to
bcm2835-rpi.dtsi. He also added support for the CAM1 camera interface
regulator.
- Uwe adds a pinctrl-based multiplexing description to allow the use of
I2C0 pins to allow usage between the 40-pin Raspberry Pi header and
the CSI and DSI connectors. He then describes the PCF85063 RTC device
available on the CM4 I/O board making use of that pinctrl-based
muxing.
- Arinc updates the Asus RT-AC3100 and RT-AC88U DTs to have proper LED
colors and function properties, NVMEM MAC addresses and removes
duplicates and unnecessary properties and does a few Device Tree
cleanups.. He then adds support for the Asus RT-AC3200 (BCM4709-based)
and RT-AC3500 routers.
- Jean-Michel adds DT nodes for the CSI Unicam camera interfaces on the
Raspberry Pi 4 / BCM2711 SoCs
- Florian adds support for the Ethernet LEDs on Raspberry Pi 4 B and
Raspberry Pi 4 CM boards.
* tag 'arm-soc/for-6.10/devicetree' of https://github.com/Broadcom/stblinux:
arm: dts: bcm2711: Describe Ethernet LEDs
ARM: dts: BCM5301X: Conform to DTS Coding Style on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: Add DT for ASUS RT-AC5300
ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200
dt-bindings: arm: bcm: add bindings for ASUS RT-AC5300
dt-bindings: arm: bcm: add bindings for ASUS RT-AC3200
ARM: dts: bcm2835: Add Unicam CSI nodes
ARM: dts: BCM5301X: remove earlycon on ASUS RT-AC3100 and ASUS RT-AC88U
ARM: dts: BCM5301X: remove duplicate compatible on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: provide address for SoC MACs on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: use color and function on ASUS RT-AC3100 and RT-AC88U
ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator
ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0
ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0
ARM: dts: bcm2835-rpi: Move duplicate firmware-clocks to bcm2835-rpi.dtsi
ARM: dts: bcm283x: Drop unneeded properties in the bcm2835-firmware node
firmware: raspberrypi: Use correct device for DMA mappings
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add gpio child node
Link: https://lore.kernel.org/r/20240429213703.2327834-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Support for handling notification pending interrupt(NPI)
The FF-A uses the notification pending interrupt to inform the receiver
that it has a pending notification. This is a virtual interrupt and is
used by the following type of receivers:
- A guest/VM running under a hypervisor(normal world usecase)
- An S-EL1 SP running under a S-EL2 SPMC(secure world only usecase)
Also, when the FF-A driver is running inside a guest VM under an
hypervisor, the driver/guest VM doesn't have the permission/capability
to request the creation of notification bitmaps. For a VM, the hypervisor
reserves memory for its VM and hypervisor framework notification bitmaps
and the SPMC reserves memory for its SP and SPMC framework notification
bitmaps before the hypervisor initializes it.
These changes include skipping of creation of notification bitmaps, some
refactoring around schedule receiver interrupt(SRI) handling and addition
of support for NPI.
2. Support for FF-A indirect messaging
The FFA_MSG_SEND2 can be used to transmit a partition message from
the Tx buffer of the sender(the driver in this case) endpoint to the Rx
buffer of the receiver endpoint and inform the scheduler that the
receiver endpoint must be run.
Apart from these two main features, there is an optimisation to avoid
queuing of a work when already running on the worker queue.
-----BEGIN PGP SIGNATURE-----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=A2PF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Mf+D
-----END PGP SIGNATURE-----
Merge tag 'ffa-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v6.10
1. Support for handling notification pending interrupt(NPI)
The FF-A uses the notification pending interrupt to inform the receiver
that it has a pending notification. This is a virtual interrupt and is
used by the following type of receivers:
- A guest/VM running under a hypervisor(normal world usecase)
- An S-EL1 SP running under a S-EL2 SPMC(secure world only usecase)
Also, when the FF-A driver is running inside a guest VM under an
hypervisor, the driver/guest VM doesn't have the permission/capability
to request the creation of notification bitmaps. For a VM, the hypervisor
reserves memory for its VM and hypervisor framework notification bitmaps
and the SPMC reserves memory for its SP and SPMC framework notification
bitmaps before the hypervisor initializes it.
These changes include skipping of creation of notification bitmaps, some
refactoring around schedule receiver interrupt(SRI) handling and addition
of support for NPI.
2. Support for FF-A indirect messaging
The FFA_MSG_SEND2 can be used to transmit a partition message from
the Tx buffer of the sender(the driver in this case) endpoint to the Rx
buffer of the receiver endpoint and inform the scheduler that the
receiver endpoint must be run.
Apart from these two main features, there is an optimisation to avoid
queuing of a work when already running on the worker queue.
* tag 'ffa-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Avoid queuing work when running on the worker queue
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
firmware: arm_ffa: Add support for FFA_MSG_SEND2
firmware: arm_ffa: Stash the partition properties for query purposes
firmware: arm_ffa: Fix kernel warning about incorrect SRI/NPI
firmware: arm_ffa: Add support for handling notification pending interrupt(NPI)
firmware: arm_ffa: Refactor SRI handling in prepartion to add NPI support
firmware: arm_ffa: Skip creation of the notification bitmaps
Link: https://lore.kernel.org/r/20240426105051.1527016-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Basic support for SCMI v3.2 pincontrol protocol
SCMI v3.2 introduces pincontrol protocol which is intended for
controlling pins and their configuration. The pin control protocol
provides commands to:
- List the pins, groups of pins, available functions, and their
association with each other.
- Set the parameter configuration and multiplexing of the pins or
groups of pins
- Optionally request exclusive access to a pin or group of pins.
- Optionally configure the permissions of an agent to access a pin
or group of pins.
These changes adds basic support for the same in the SCMI core layer
and an implementation of the generic scmi-pinctrl driver with associated
DT bindings.
2. Framework support for multiple vendors custom protocols
With the fixed space for vendor protocols, the possibility of having
multiple vendors implementing distinct SCMI vendor protocols with
the same overlapping protocol number is very high and with the need
to support them all in a single kernel image or a module is also high.
In order to implement the same we assume:
- vendor protocols has to be tagged at build time with a vendor_id
- vendor protocols could also optionally be tagged at build time with
sub_vendor_id and implementation version
At the initialisation all the built vendor protocols are registered
with the SCMI core using a key derived from the above tags
3. Logging and tracing improvements
This includes using dev_err_probe() to bail out from probe, adding
message dump traces for bad and unexpected replies and widening of
the tag buffer in trace_scmi_dump_msg to allow diverse tag names
4. Miscellaneous updates or improvements
This includes adding the accessor function get_max_msg_size() used
in pinctl protocol, updation of dt-bindings examples for protocol@13
to promote new bindings and simplification of scmi_devm_notifier_unregister
-----BEGIN PGP SIGNATURE-----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=WRU/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Yce+
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.10
1. Basic support for SCMI v3.2 pincontrol protocol
SCMI v3.2 introduces pincontrol protocol which is intended for
controlling pins and their configuration. The pin control protocol
provides commands to:
- List the pins, groups of pins, available functions, and their
association with each other.
- Set the parameter configuration and multiplexing of the pins or
groups of pins
- Optionally request exclusive access to a pin or group of pins.
- Optionally configure the permissions of an agent to access a pin
or group of pins.
These changes adds basic support for the same in the SCMI core layer
and an implementation of the generic scmi-pinctrl driver with associated
DT bindings.
2. Framework support for multiple vendors custom protocols
With the fixed space for vendor protocols, the possibility of having
multiple vendors implementing distinct SCMI vendor protocols with
the same overlapping protocol number is very high and with the need
to support them all in a single kernel image or a module is also high.
In order to implement the same we assume:
- vendor protocols has to be tagged at build time with a vendor_id
- vendor protocols could also optionally be tagged at build time with
sub_vendor_id and implementation version
At the initialisation all the built vendor protocols are registered
with the SCMI core using a key derived from the above tags
3. Logging and tracing improvements
This includes using dev_err_probe() to bail out from probe, adding
message dump traces for bad and unexpected replies and widening of
the tag buffer in trace_scmi_dump_msg to allow diverse tag names
4. Miscellaneous updates or improvements
This includes adding the accessor function get_max_msg_size() used
in pinctl protocol, updation of dt-bindings examples for protocol@13
to promote new bindings and simplification of scmi_devm_notifier_unregister
* tag 'scmi-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
pinctrl: Implementation of the generic scmi-pinctrl driver
firmware: arm_scmi: Add basic support for SCMI v3.2 pincontrol protocol
dt-bindings: firmware: Support SCMI pinctrl protocol
firmware: arm_scmi: Introduce get_max_msg_size() helper/accessor
firmware: arm_scmi: Add support for multiple vendors custom protocols
dt-bindings: firmware: arm,scmi: Update examples for protocol@13
firmware: arm_scmi: Avoid non-constant printk format strings
firmware: arm_scmi: Use dev_err_probe to bail out
firmware: arm_scmi: Simplify scmi_devm_notifier_unregister
firmware: arm_scmi: Add message dump traces for bad and unexpected replies
firmware: arm_scmi: Add helper to trace bad messages
include: trace: Widen the tag buffer in trace_scmi_dump_msg
firmware: arm_scmi: Log the perf domain names in the error paths
Link: https://lore.kernel.org/r/20240426105031.1526987-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm SCM driver initialization order is improved, to avoid any
potential for a client to find a half-initialized SCM instance.
The handling of download mode bits is updated to not attempt
QCOM_SCM_BOOT_SET_DLOAD_MODE if a io-address for the update is
specified, and that path is changed to perform a read-modify-write to
avoid updating unrelated bits. Error handling is corrected in the
peripheral authentication service (PAS) functions, to release
interconnect bandwidth votes in the case of an error. An unwanted error
print on allocation error is also removed from this code path.
The QSEECOM allow list is marked __maybe_unused to avoid build warnings
when built with !OF. The error handling related to the interconnect API
is cleaned up to avoid handling the impossible IS_ERR() condition.
initcall level is bumped to "core" for cmd-db and rpmh-rsc, as dependent
drivers like regulators, interconnects and clocks are registered at this
level.
Another attempt is made to remove the strncpy() usage in cmd-db, this
time with strtomem_pad() which has the correct characteristics.
The bwmon regmap cache is changed to maple tree.
After an attempt to add missing MODULE_DEVICE_TABLEs to debug drivers,
the intention of not having them automatically load is documented.
Operations on the pmic_glink client list is put under mutual exclusion,
to avoid races when clients are being registered. pmic_glink client
registered after the firmware notification arrived was not informed that
the firmware was up, this is resolved.
More DSPs and the apss subsystem is added to the Qualcomm sleep stats driver.
Checks for in-flight regulator requests in the RPMh RSC driver is
improved to deal with the fact that these occupy multiple registers, so
it's insufficient to just to direct address comparison.
The socinfo drivers learns about X1 Elite and SMB2360 PMIC.
The maintainers entry is split between the linux-arm-msm list and
subset that is maintained in the qcom-soc tree, to avoid some confusion
about maintainership.
-----BEGIN PGP SIGNATURE-----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=E1Yk
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+dt0
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.10
The Qualcomm SCM driver initialization order is improved, to avoid any
potential for a client to find a half-initialized SCM instance.
The handling of download mode bits is updated to not attempt
QCOM_SCM_BOOT_SET_DLOAD_MODE if a io-address for the update is
specified, and that path is changed to perform a read-modify-write to
avoid updating unrelated bits. Error handling is corrected in the
peripheral authentication service (PAS) functions, to release
interconnect bandwidth votes in the case of an error. An unwanted error
print on allocation error is also removed from this code path.
The QSEECOM allow list is marked __maybe_unused to avoid build warnings
when built with !OF. The error handling related to the interconnect API
is cleaned up to avoid handling the impossible IS_ERR() condition.
initcall level is bumped to "core" for cmd-db and rpmh-rsc, as dependent
drivers like regulators, interconnects and clocks are registered at this
level.
Another attempt is made to remove the strncpy() usage in cmd-db, this
time with strtomem_pad() which has the correct characteristics.
The bwmon regmap cache is changed to maple tree.
After an attempt to add missing MODULE_DEVICE_TABLEs to debug drivers,
the intention of not having them automatically load is documented.
Operations on the pmic_glink client list is put under mutual exclusion,
to avoid races when clients are being registered. pmic_glink client
registered after the firmware notification arrived was not informed that
the firmware was up, this is resolved.
More DSPs and the apss subsystem is added to the Qualcomm sleep stats driver.
Checks for in-flight regulator requests in the RPMh RSC driver is
improved to deal with the fact that these occupy multiple registers, so
it's insufficient to just to direct address comparison.
The socinfo drivers learns about X1 Elite and SMB2360 PMIC.
The maintainers entry is split between the linux-arm-msm list and
subset that is maintained in the qcom-soc tree, to avoid some confusion
about maintainership.
* tag 'qcom-drivers-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (21 commits)
soc: qcom: cmd-db: replace deprecated strncpy with strtomem
soc: qcom: rpmh-rsc: Enhance check for VRM in-flight request
firmware: qcom: scm: Modify only the download bits in TCSR register
firmware: qcom: scm: Fix __scm and waitq completion variable initialization
firmware: qcom: scm: Rework dload mode availability check
firmware: qcom: scm: Remove redundant scm argument from qcom_scm_waitq_wakeup()
firmware: qcom: scm: Remove log reporting memory allocation failure
soc: qcom: pmic_glink: notify clients about the current state
soc: qcom: pmic_glink: don't traverse clients list without a lock
soc: qcom: mention intentionally broken module autoloading
firmware: qcom: qcm: fix unused qcom_scm_qseecom_allowlist
MAINTAINERS: Split Qualcomm SoC and linux-arm-msm entries
soc: qcom: qcom_stats: Add DSPs and apss subsystem stats
dt-bindings: soc: qcom: qcom,pmic-glink: document QCM6490 compatible
soc: qcom: socinfo: Add SMB2360 PMIC
soc: qcom: socinfo: Add X1E80100 SoC ID table entry
dt-bindings: arm: qcom,ids: Add SoC ID for X1E80100
soc: qcom: Update init level to core_initcall() for cmd-db and rpmh-rsc
soc: qcom: icc-bwmon: Convert to use maple tree register cache
firmware: qcom_scm: remove IS_ERR() checks from qcom_scm_bw_{en,dis}able()
...
Link: https://lore.kernel.org/r/20240427160917.1431354-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
priv.runtime_map is only allocated when efi_novamap is not set.
Otherwise, it is an uninitialized value. In the error path, it is freed
unconditionally. Avoid passing an uninitialized value to free_pool.
Free priv.runtime_map only when it was allocated.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Fixes: f80d26043a ("efi: libstub: avoid efi_get_memory_map() for allocating the virt map")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
This reworks the memory layout of the argument buffers passed to trusted
applications in QSEECOM, to avoid failures and system crashes.
-----BEGIN PGP SIGNATURE-----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=a4z1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=IZFk
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into for-next
Qualcomm driver fix for v6.9
This reworks the memory layout of the argument buffers passed to trusted
applications in QSEECOM, to avoid failures and system crashes.
* tag 'qcom-drivers-fixes-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: uefisecapp: Fix memory related IO errors and crashes
Link: https://lore.kernel.org/r/20240420163816.1133528-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently notif_pcpu_irq_work_fn() may get queued from the work that is
already running on the 'notif_pcpu_wq' workqueue. This may add
unnecessary delays and could be avoided if the work is called directly
instead.
This change removes queuing of the work when already running on the
'notif_pcpu_wq' workqueue thereby removing any possible delays in that
path.
Link: https://lore.kernel.org/r/20240424131640.706870-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
As it says on the tin. It can be kinda confusing when "22830" is in hex,
so prefix the hex numbers with a "0x".
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
If validation fails, both prints are made. Skip the success one in the
failure case.
Fixes: ec5b0f1193 ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Commit 50e782a86c ("efi/unaccepted: Fix soft lockups caused by
parallel memory acceptance") has released the spinlock so other CPUs can
do memory acceptance in parallel and not triggers softlockup on other
CPUs.
However the softlock up was intermittent shown up if the memory of the
TD guest is large, and the timeout of softlockup is set to 1 second:
RIP: 0010:_raw_spin_unlock_irqrestore
Call Trace:
? __hrtimer_run_queues
<IRQ>
? hrtimer_interrupt
? watchdog_timer_fn
? __sysvec_apic_timer_interrupt
? __pfx_watchdog_timer_fn
? sysvec_apic_timer_interrupt
</IRQ>
? __hrtimer_run_queues
<TASK>
? hrtimer_interrupt
? asm_sysvec_apic_timer_interrupt
? _raw_spin_unlock_irqrestore
? __sysvec_apic_timer_interrupt
? sysvec_apic_timer_interrupt
accept_memory
try_to_accept_memory
do_huge_pmd_anonymous_page
get_page_from_freelist
__handle_mm_fault
__alloc_pages
__folio_alloc
? __tdx_hypercall
handle_mm_fault
vma_alloc_folio
do_user_addr_fault
do_huge_pmd_anonymous_page
exc_page_fault
? __do_huge_pmd_anonymous_page
asm_exc_page_fault
__handle_mm_fault
When the local irq is enabled at the end of accept_memory(), the
softlockup detects that the watchdog on single CPU has not been fed for
a while. That is to say, even other CPUs will not be blocked by
spinlock, the current CPU might be stunk with local irq disabled for a
while, which hurts not only nmi watchdog but also softlockup.
Chao Gao pointed out that the memory accept could be time costly and
there was similar report before. Thus to avoid any softlocup detection
during this stage, give the softlockup a flag to skip the timeout check
at the end of accept_memory(), by invoking touch_softlockup_watchdog().
Reported-by: Hossain, Md Iqbal <md.iqbal.hossain@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: 50e782a86c ("efi/unaccepted: Fix soft lockups caused by parallel memory acceptance")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The "msg" pointer is a struct and msg->offset is the sizeof(*msg). The
pointer here math means the memcpy() will write outside the bounds.
Cast "msg" to a u8 pointer to fix this.
Fixes: 02c19d84c7 ("firmware: arm_ffa: Add support for FFA_MSG_SEND2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/cd5fb6b5-81fa-4a6d-b2b8-284ca704bbff@moroto.mountain
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Crashdump collection is done based on DLOAD bits of TCSR register.
To retain other bits, scm driver need to read the register and
modify only the DLOAD bits, as other bits in TCSR may have their
own significance.
Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> # IPQ9574 and IPQ5332
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/1711042655-31948-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It is possible qcom_scm_is_available() gives wrong indication that
if __scm is initialized while __scm->dev is not and similar issue
is also possible with __scm->waitq_comp.
Fix this appropriately by the use of release barrier and read barrier
that will make sure if __scm is initialized so, is all of its field
variable.
Fixes: d0f6fa7ba2 ("firmware: qcom: scm: Convert SCM to platform driver")
Fixes: 6bf3259922 ("firmware: qcom: scm: Add wait-queue handling logic")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/1711034642-22860-4-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
QCOM_SCM_BOOT_SET_DLOAD_MODE scm command is applicable for very
older SoCs where this command is supported from firmware and
for newer SoCs, dload mode tcsr registers is used for setting
the download mode.
Currently, qcom_scm_set_download_mode() checks for availability
of QCOM_SCM_BOOT_SET_DLOAD_MODE command even for SoCs where this
is not used. Fix this by switching the condition to keep the
command availability check only if dload mode registers are not
available.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1711034642-22860-3-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When the agent is sending data to the SCMI platform, the drivers in the
agent could check the maximum message size supported to avoid potential
protocol buffer overflow.
Introduce the helper/accessor function get_max_msg_size() for the same.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240418-pinctrl-scmi-v11-1-499dca9864a7@nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The "SoC ID revision" as provided via the SMCCC SOCID interface can be
valuable information for drivers, when certain functionality depends
on a die revision, for instance.
One example is the sun50i-cpufreq-nvmem driver, which needs this
information to determine the speed bin of the SoC.
Export the arm_smccc_get_soc_id_revision() function so that it can be
called by any driver.
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The FFA_MSG_SEND2 can be used to transmit a partition message from
the Tx buffer of the sender(the driver in this case) endpoint to the Rx
buffer of the receiver endpoint.
An invocation of the FFA_MSG_SEND2 transfers the ownership of the Tx
buffer to the receiver endpoint(or any intermediate consumer). Completion
of an FFA_MSG_SEND2 invocation transfers the ownership of the buffer
back to the sender endpoint.
The framework defines the FFA_MSG_SEND2 interface to transmit a partition
message from the Tx buffer of the sender to the Rx buffer of a receiver
and inform the scheduler that the receiver must be run.
Link: https://lore.kernel.org/r/20240417090931.2866487-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The properies obtained from the partition information descriptor as
part of initial partitions discovery is useful as it contain info
if the partition
- Runs in AArch64 or AArch32 execution state
- Can send and/or receive direct requests
- Can send and receive indirect message
- Does support receipt of notifications.
These can be used for querying before attempting to do any of the
above operations.
Link: https://lore.kernel.org/r/20240417090921.2866447-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
If the firmware returns incorrect SRI/NRI number, we fail to set it up
in the kernel which is absolutely fine.
However, we don't reset the stashed value of sched_recv or notif_pend
IRQs. When we call ffa_notifications_cleanup() in case of failures to
setup the notifications, we end up calling free_percpu_irq() from
ffa_uninit_pcpu_irq() which results in the following warning:
| genirq: Flags mismatch irq 6. 00004401 (ARM-FFA-NPI) vs. 00004400 (IPI)
| ARM FF-A: Error registering percpu NPI nIRQ 6 : -16
| ARM FF-A: Notification setup failed -16, not enabled
| ------------[ cut here ]------------
| Trying to free already-free IRQ 6
| WARNING: CPU: 2 PID: 1 at kernel/irq/manage.c:2476 __free_percpu_irq+0x6c/0x138
| Modules linked in:
| CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc3 #211
| Hardware name: FVP Base RevC (DT)
| pstate: 614000c9 (nZCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
| pc : __free_percpu_irq+0x6c/0x138
| lr : __free_percpu_irq+0x6c/0x138
| Call trace:
| __free_percpu_irq+0x6c/0x138
| free_percpu_irq+0x48/0x84
| ffa_notifications_cleanup+0x78/0x164
| ffa_notifications_setup+0x368/0x3c0
| ffa_init+0x2b4/0x36c
| do_one_initcall+0xe0/0x258
| do_initcall_level+0x8c/0xac
| do_initcalls+0x54/0x94
| do_basic_setup+0x1c/0x28
| kernel_init_freeable+0x108/0x174
| kernel_init+0x20/0x1a4
| ret_from_fork+0x10/0x20
Fix the same by resetting the stashed copy of IRQ values to 0 in case
of any failure to set them up properly.
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240418102932.3093576-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a mechanism to be able to tag vendor protocol modules at compile-time
with a vendor/sub_vendor string and an implementation version and then to
choose to load, at run-time, only those vendor protocol modules matching
as close as possible the vendor/subvendor identification advertised by
the SCMI platform server.
In this way, any in-tree existent vendor protocol module can be build and
shipped by default in a single kernel image, even when using the same
clashing protocol identification numbers, since the SCMI core will take
care at run-time to load only the ones pertinent to the running system.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240418095121.3238820-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The FF-A uses the notification pending interrupt to inform the receiver
that it has a pending notification. This is a virtual interrupt and is
used by the following type of receivers:
1. A guest/VM running under a hypervisor.
2. An S-EL1 SP running under a S-EL2 SPMC.
The rules that govern the properties of the NPI are the same as the
rules for the SRI with couple of exceptions. Both SRI and NPI can be
supported simultaneously.
The handling of NPI is also same as the handling of notification for the
self/primary VM with ID 0 except the absence of global notification.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240411-ffa_npi_support-v2-3-927a670254e6@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
In preparation to support handling of Notification Pending Interrupt(NPI)
in addition to the existing support for Schedule Receiver Interrupt(SRI),
refactor the code around SRI handling so that NPI support can reuse some
of it. This change shouldn't have any functionality impact. It neither
adds the support for NPIs nor changes any SRI support.
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240411-ffa_npi_support-v2-2-927a670254e6@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When the FF-A driver is running inside a guest VM under an hypervisor,
the driver/guest VM doesn't have the permission/capability to request
the creation of notification bitmaps. For a VM, the hypervisor reserves
memory for its VM and hypervisor framework notification bitmaps and the
SPMC reserves memory for its SP and SPMC framework notification bitmaps
before the hypervisor initializes it.
The hypervisor does not initialize a VM if memory cannot be reserved
for all its notification bitmaps. So the creation of all the necessary
bitmaps are already done when the driver initialises and hence it can be
skipped. We rely on FFA_FEATURES(FFA_NOTIFICATION_BITMAP_CREATE) to fail
when running in the guest to handle this in the driver.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240411-ffa_npi_support-v2-1-927a670254e6@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
