Commit Graph

34 Commits

Author SHA1 Message Date
Yoann Congal
27021649ec printk: Remove redundant CONFIG_BASE_FULL
CONFIG_BASE_FULL is equivalent to !CONFIG_BASE_SMALL and is enabled by
default: CONFIG_BASE_SMALL is the special case to take care of.
So, remove CONFIG_BASE_FULL and move the config choice to
CONFIG_BASE_SMALL (which defaults to 'n')

For defconfigs explicitely disabling BASE_FULL, explicitely enable
BASE_SMALL.
For defconfigs explicitely enabling BASE_FULL, drop it as it is the
default.

Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240505080343.1471198-4-yoann.congal@smile.fr
Signed-off-by: Petr Mladek <pmladek@suse.com>
2024-05-06 17:39:09 +02:00
Radhey Shyam Pandey
ffb0399437 microblaze: defconfig: Enable the Marvell phy driver
Enable the marvell phy driver by default as it is commonly
used PHY on multiple microblaze based evaluation boards.

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/3912fb168671dd5b418da8947ea1c463b554fa86.1698155190.git.michal.simek@amd.com
2023-11-15 13:49:14 +01:00
Raju Kumar Pothuraju
873b074050 microblaze: Enable options to mount a rootfs via NFS
Enable the options to mount a rootfs over NFS for microblaze
platforms and also support for automatic configuration of IP addresses
during boot as needed by NFS.

Signed-off-by: Raju Kumar Pothuraju <rajukumar.pothuraju@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/d7bc1c93e485e0a6ab2c234a144402b7bd5f77bb.1698155190.git.michal.simek@amd.com
2023-11-15 13:49:14 +01:00
Michal Simek
a4d511aa24 microblaze: Align defconfig with latest Kconfig layout
Sync up patch.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/4414109ba26433f00b4c07f600162462ab6c7a93.1698155190.git.michal.simek@amd.com
2023-11-15 13:49:14 +01:00
Randy Dunlap
ef815d2cba treewide: drop CONFIG_EMBEDDED
There is only one Kconfig user of CONFIG_EMBEDDED and it can be switched
to EXPERT or "if !ARCH_MULTIPLATFORM" (suggested by Arnd).

Link: https://lkml.kernel.org/r/20230816055010.31534-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>	[RISC-V]
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>	[powerpc]
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 13:46:25 -07:00
Vlastimil Babka
eb07c4f39c mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
As discussed at LSF/MM [1] [2] and with no objections raised there,
deprecate the SLAB allocator. Rename the user-visible option so that
users with CONFIG_SLAB=y get a new prompt with explanation during make
oldconfig, while make olddefconfig will just switch to SLUB.

In all defconfigs with CONFIG_SLAB=y remove the line so those also
switch to SLUB. Regressions due to the switch should be reported to
linux-mm and slab maintainers.

[1] https://lore.kernel.org/all/4b9fc9c6-b48c-198f-5f80-811a44737e5f@suse.cz/
[2] https://lwn.net/Articles/932201/

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Helge Deller <deller@gmx.de> # parisc
2023-05-26 19:01:47 +02:00
Thippeswamy Havalige
41604bfdc9 microblaze/PCI: Remove support for Xilinx PCI host bridge
This patch removes support for the Xilinx PCI host
bridge IPcore.

Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Link: https://lore.kernel.org/r/20221025065214.4663-13-thippeswamy.havalige@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-11-25 11:39:23 +01:00
Arnd Bergmann
64367f2e4f treewide: defconfig: address renamed CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the
explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT,
DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5.

This was actually not what I had in mind when I suggested making it a
'choice' statement, but it's too late to change again now, and the Kconfig
logic is more sensible in the new form.

Change any defconfig file that had CONFIG_DEBUG_INFO enabled but did not
pick DWARF4 or DWARF5 explicitly to now pick the toolchain default.

Link: https://lkml.kernel.org/r/20220811114609.2097335-1-arnd@kernel.org
Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-11 21:55:05 -07:00
Michal Simek
05cdf45747 microblaze: Remove noMMU code
This configuration is obsolete and likely none is really using it. That's
why remove it to simplify code.

Note about CONFIG_MMU in hw_exception_handler.S is left intentionally
for better comment understanding.

Cc: Mike Rapoport <rppt@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/43486cab370e0c0a79860120b71e0caac75a7e44.1606397528.git.michal.simek@xilinx.com
2020-11-26 16:39:35 +01:00
Michal Simek
2602276d3d microblaze: Wire CMA allocator
Based on commit 04e3543e22 ("microblaze: use the generic dma coherent
remap allocator")
CMA can be easily enabled by calling dma_contiguous_reserve() at the end of
mmu_init(). High limit is end of lowmem space which is completely unused at
this point of time.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-02-04 11:38:59 +01:00
Michal Simek
5fefd796c8 microblaze: Sync defconfig with latest Kconfig layout
Layout was changed by commit 6210b6402f
("kernel-hacking: group sysrq/kgdb/ubsan into 'Generic Kernel Debugging Instruments'")

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-04 11:38:59 +01:00
Manish Narani
6162cd2b40 microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers
As EXT4 filesystem driver is used for handling EXT2 file systems as
well. There is no need to enable EXT2 driver. This patch disables EXT2
and enables EXT3/EXT4 drivers.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-04 11:38:59 +01:00
Manjukumar Matha
a323fb63d0 microblaze: defconfig: Enable devtmps and tmpfs
Currently dropbear does not run in background because devtmps and tmpfs
is not enabled by default. Enable devtmps and tmpfs to fix this issue.

Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-25 08:15:15 +02:00
Linus Walleij
7cca9b8b7c microblaze: Switch to standard restart handler
The microblaze uses the legacy APIs to dig out a GPIO pin
defined in the root of the device tree to issue a hard
reset of the platform.

Asserting a hard reset should be done using the standard
DT-enabled and fully GPIO descriptor aware driver in
drivers/power/reset/gpio-restart.c using the bindings
from Documentation/devicetree/bindings/power/reset/gpio-restart.txt

To achieve this, first make sure microblaze makes use of
the standard kernel restart path utilizing do_kernel_restart()
from <linux/reboot.h>. Put in some grace time and an
emergency print if the restart does not properly assert.

As this is basic platform functionality we patch the DTS
file and defconfig in one go for a lockstep change.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[ Michal: Move machine_restart back to reset.c ]
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-09-19 10:43:32 +02:00
Michal Simek
1c62ed9083 microblaze: defconfig synchronization
Kconfig structure has changed that's why make sense to do synchronization.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-09-18 09:51:40 +02:00
Michal Simek
6be76fd94b microblaze: Enable Xilinx AXI emac driver by default
Enable Xilinx AXI emac ethernet driver for Microblaze.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-09-18 09:51:26 +02:00
Vineeth Chowdary Karumanchi
e16f1ad442 microblaze: Enabling CONFIG_BRIDGE in mmu_defconfig
This patch enables CONFIG_BRIDGE=m by default to be aligned
with Xilinx defaults.

Signed-off-by: Vineeth Chowdary Karumanchi <vineethchowz.chowdary@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-22 15:36:59 +02:00
Vineeth Chowdary Karumanchi
17f4977ccd microblaze: Enabling CONFIGS related to MTD
Add support for Intel and AMD flash devices by default for mmu
configuration.

Signed-off-by: Vineeth Chowdary Karumanchi <vineethchowz.chowdary@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-22 15:36:58 +02:00
Michal Simek
e0d4fa5f7a microblaze: Update defconfigs
Run "make savedefconfig" to bring up to date.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-22 15:36:58 +02:00
David Howells
50d35015ff KEYS: CONFIG_KEYS_DEBUG_PROC_KEYS is no longer an option
CONFIG_KEYS_DEBUG_PROC_KEYS is no longer an option as /proc/keys is now
mandatory if the keyrings facility is enabled (it's used by libkeyutils in
userspace).

The defconfig references were removed with:

	perl -p -i -e 's/CONFIG_KEYS_DEBUG_PROC_KEYS=y\n//' \
	    `git grep -l CONFIG_KEYS_DEBUG_PROC_KEYS=y`

and the integrity Kconfig fixed by hand.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Andreas Ziegler <andreas.ziegler@fau.de>
cc: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2016-02-10 10:13:27 +00:00
Michal Simek
a44e437ac6 microblaze: Enable SERIAL_OF_PLATFORM
SERIAL_OF_PLATFORM is required for getting 8250 to work.

Reported-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-06-04 06:59:46 +02:00
Michal Simek
c421cee4e8 microblaze: Enable KGDB in defconfig
Enable KGDB in defconfig to be sure that support
is regularly compiled.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-26 11:36:55 +02:00
Michal Simek
08aaefa0df microblaze: Do not select OPT_LIB_ASM by default
This option is valid only for BE systems.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09 09:04:31 +02:00
Michal Simek
d0e045401f microblaze: Update microblaze defconfigs
The main reason is 0-day testing system which can directly
use these defconfigs for testing.

Enable support for all xilinx drivers which Microblaze
can use and disable dependency on external rootfs.cpio.
There is only one exception which is axi ethernet driver
which still uses NO_IRQ which is not defined for Microblaze.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-01-04 09:52:36 +01:00
David Rientjes
6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Amerigo Wang
d15be32c30 microblaze: remove obsolete DEBUG_BOOTMEM
"git grep" shows this is the last piece of code using DEBUG_BOOTMEM,
so remove it.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-01-10 09:29:51 +01:00
Sam Ravnborg
8b1bb90701 defconfig reduction
Use the defconfig files generated by "make savedefconfig" for
remaining defconfig files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-14 22:26:53 +02:00
Michal Simek
6513412135 microblaze: Defconfig update
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:37:42 +02:00
Michal Simek
7823860ca2 microblaze: Defconfig update
There were several changes in Microblaze defconfig that's why
is good to update defconfigs.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-02-03 10:18:20 +01:00
Michal Simek
bfc8125858 microblaze: Disable heartbeat/enable emaclite in defconfigs
I need to disable heartbeat function because this features
breaks testing in Qemu.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-09-24 10:30:27 +02:00
Michal Simek
1fef789175 microblaze: Update Microblaze defconfigs
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-08-18 11:05:11 +02:00
Michal Simek
2c65b4665f microblaze_mmu_v2: Add mmu_defconfig
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-26 16:45:13 +02:00
Michal Simek
3026589c1b microblaze: Update Microblaze defconfig
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-18 14:47:41 +02:00
Michal Simek
2d43dab99a microblaze_v8: defconfig file
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: John Linn <john.linn@xilinx.com>
Acked-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 14:25:19 +01:00