commit 15fffc6a56 upstream.
uevent_show() wants to de-reference dev->driver->name. There is no clean
way for a device attribute to de-reference dev->driver unless that
attribute is defined via (struct device_driver).dev_groups. Instead, the
anti-pattern of taking the device_lock() in the attribute handler risks
deadlocks with code paths that remove device attributes while holding
the lock.
This deadlock is typically invisible to lockdep given the device_lock()
is marked lockdep_set_novalidate_class(), but some subsystems allocate a
local lockdep key for @dev->mutex to reveal reports of the form:
======================================================
WARNING: possible circular locking dependency detected
6.10.0-rc7+ #275 Tainted: G OE N
------------------------------------------------------
modprobe/2374 is trying to acquire lock:
ffff8c2270070de0 (kn->active#6){++++}-{0:0}, at: __kernfs_remove+0xde/0x220
but task is already holding lock:
ffff8c22016e88f8 (&cxl_root_key){+.+.}-{3:3}, at: device_release_driver_internal+0x39/0x210
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&cxl_root_key){+.+.}-{3:3}:
__mutex_lock+0x99/0xc30
uevent_show+0xac/0x130
dev_attr_show+0x18/0x40
sysfs_kf_seq_show+0xac/0xf0
seq_read_iter+0x110/0x450
vfs_read+0x25b/0x340
ksys_read+0x67/0xf0
do_syscall_64+0x75/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (kn->active#6){++++}-{0:0}:
__lock_acquire+0x121a/0x1fa0
lock_acquire+0xd6/0x2e0
kernfs_drain+0x1e9/0x200
__kernfs_remove+0xde/0x220
kernfs_remove_by_name_ns+0x5e/0xa0
device_del+0x168/0x410
device_unregister+0x13/0x60
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c7/0x210
driver_detach+0x47/0x90
bus_remove_driver+0x6c/0xf0
cxl_acpi_exit+0xc/0x11 [cxl_acpi]
__do_sys_delete_module.isra.0+0x181/0x260
do_syscall_64+0x75/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The observation though is that driver objects are typically much longer
lived than device objects. It is reasonable to perform lockless
de-reference of a @driver pointer even if it is racing detach from a
device. Given the infrequency of driver unregistration, use
synchronize_rcu() in module_remove_driver() to close any potential
races. It is potentially overkill to suffer synchronize_rcu() just to
handle the rare module removal racing uevent_show() event.
Thanks to Tetsuo Handa for the debug analysis of the syzbot report [1].
Fixes: c0a40097f0 ("drivers: core: synchronize really_probe() and dev_uevent()")
Reported-by: syzbot+4762dd74e32532cda5ff@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Closes: http://lore.kernel.org/5aa5558f-90a4-4864-b1b1-5d6784c5607d@I-love.SAKURA.ne.jp [1]
Link: http://lore.kernel.org/669073b8ea479_5fffa294c1@dwillia2-xfh.jf.intel.com.notmuch
Cc: stable@vger.kernel.org
Cc: Ashish Sangwan <a.sangwan@samsung.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Dirk Behme <dirk.behme@de.bosch.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/172081332794.577428.9738802016494057132.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bd50a97409 ]
It will cause memory leakage when use driver API devm_free_percpu()
to free memory allocated by devm_alloc_percpu(), fixed by using
devres_release() instead of devres_destroy() within devm_free_percpu().
Fixes: ff86aae3b4 ("devres: add devm_alloc_percpu()")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/1719931914-19035-3-git-send-email-quic_zijuhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7aa44f5a1 ]
Sparse is not happy:
drivers/base/devres.c:1230:9: warning: cast removes address space '__percpu' of expression
Use __force attribute to make it happy.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210401171030.60527-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: bd50a97409 ("devres: Fix memory leakage caused by driver API devm_free_percpu()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c0a40097f0 upstream.
Synchronize the dev->driver usage in really_probe() and dev_uevent().
These can run in different threads, what can result in the following
race condition for dev->driver uninitialization:
Thread #1:
==========
really_probe() {
...
probe_failed:
...
device_unbind_cleanup(dev) {
...
dev->driver = NULL; // <= Failed probe sets dev->driver to NULL
...
}
...
}
Thread #2:
==========
dev_uevent() {
...
if (dev->driver)
// If dev->driver is NULLed from really_probe() from here on,
// after above check, the system crashes
add_uevent_var(env, "DRIVER=%s", dev->driver->name);
...
}
really_probe() holds the lock, already. So nothing needs to be done
there. dev_uevent() is called with lock held, often, too. But not
always. What implies that we can't add any locking in dev_uevent()
itself. So fix this race by adding the lock to the non-protected
path. This is the path where above race is observed:
dev_uevent+0x235/0x380
uevent_show+0x10c/0x1f0 <= Add lock here
dev_attr_show+0x3a/0xa0
sysfs_kf_seq_show+0x17c/0x250
kernfs_seq_show+0x7c/0x90
seq_read_iter+0x2d7/0x940
kernfs_fop_read_iter+0xc6/0x310
vfs_read+0x5bc/0x6b0
ksys_read+0xeb/0x1b0
__x64_sys_read+0x42/0x50
x64_sys_call+0x27ad/0x2d30
do_syscall_64+0xcd/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Similar cases are reported by syzkaller in
https://syzkaller.appspot.com/bug?extid=ffa8143439596313a85a
But these are regarding the *initialization* of dev->driver
dev->driver = drv;
As this switches dev->driver to non-NULL these reports can be considered
to be false-positives (which should be "fixed" by this commit, as well,
though).
The same issue was reported and tried to be fixed back in 2015 in
https://lore.kernel.org/lkml/1421259054-2574-1-git-send-email-a.sangwan@samsung.com/
already.
Fixes: 239378f16a ("Driver core: add uevent vars for devices of a class")
Cc: stable <stable@kernel.org>
Cc: syzbot+ffa8143439596313a85a@syzkaller.appspotmail.com
Cc: Ashish Sangwan <a.sangwan@samsung.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20240513050634.3964461-1-dirk.behme@de.bosch.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e7a7681c85 ]
When driver uses pm_runtime_force_suspend() as the system suspend callback
function and registers the wake irq with reverse enable ordering, the wake
irq will be re-enabled when entering system suspend, triggering an
'Unbalanced enable for IRQ xxx' warning. In this scenario, the call
sequence during system suspend is as follows:
suspend_devices_and_enter()
-> dpm_suspend_start()
-> dpm_run_callback()
-> pm_runtime_force_suspend()
-> dev_pm_enable_wake_irq_check()
-> dev_pm_enable_wake_irq_complete()
-> suspend_enter()
-> dpm_suspend_noirq()
-> device_wakeup_arm_wake_irqs()
-> dev_pm_arm_wake_irq()
To fix this issue, complete the setting of WAKE_IRQ_DEDICATED_ENABLED flag
in dev_pm_enable_wake_irq_complete() to avoid redundant irq enablement.
Fixes: 8527beb120 ("PM: sleep: wakeirq: fix wake irq arming")
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Qingliang Li <qingliang.li@mediatek.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c422f0b97 ]
The map->bus can be NULL here, add the missing NULL pointer check.
Fixes: d77e745613 ("regmap: Add bulk read/write callbacks into regmap_config")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
To: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20220509003035.225272-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d77e745613 ]
Currently the regmap_config structure only allows the user to implement
single element register read/write using .reg_read/.reg_write callbacks.
The regmap_bus already implements bulk counterparts of both, and is being
misused as a workaround for the missing bulk read/write callbacks in
regmap_config by a couple of drivers. To stop this misuse, add the bulk
read/write callbacks to regmap_config and call them from the regmap core
code.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/r/20220430025145.640305-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 3f42b142ea ("serial: max310x: fix IO data corruption in batched operations")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02d6fdecb9 ]
Some device requires a special handling for reg_update_bits and can't use
the normal regmap read write logic. An example is when locking is
handled by the device and rmw operations requires to do atomic operations.
Allow to declare a dedicated function in regmap_config for
reg_update_bits in no bus configuration.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20211104150040.1260-1-ansuelsmth@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 3f42b142ea ("serial: max310x: fix IO data corruption in batched operations")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4060db925 ]
The PM Runtime docs say:
Drivers in ->remove() callback should undo the runtime PM changes done
in ->probe(). Usually this means calling pm_runtime_disable(),
pm_runtime_dont_use_autosuspend() etc.
>From grepping code, it's clear that many people aren't aware of the
need to call pm_runtime_dont_use_autosuspend().
When brainstorming solutions, one idea that came up was to leverage
the new-ish devm_pm_runtime_enable() function. The idea here is that:
* When the devm action is called we know that the driver is being
removed. It's the perfect time to undo the use_autosuspend.
* The code of pm_runtime_dont_use_autosuspend() already handles the
case of being called when autosuspend wasn't enabled.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 3d07a411b4 ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b3636a3a2c ]
A typical code pattern for pm_runtime_enable() call is to call it in the
_probe function and to call pm_runtime_disable() both from _probe error
path and from _remove function. For some drivers the whole remove
function would consist of the call to pm_remove_disable().
Add helper function to replace this bolierplate piece of code. Calling
devm_pm_runtime_enable() removes the need for calling
pm_runtime_disable() both in the probe()'s error path and in the
remove() function.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210731195034.979084-2-dmitry.baryshkov@linaro.org
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: 3d07a411b4 ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 741ba0134f upstream.
The unused clock cleanup uses the _sync initcall to give all users at
earlier initcalls time to probe. Do the same to avoid leaving some PDs
dangling at "on" (which actually happened on qcom!).
Fixes: 2fe71dcdfd ("PM / domains: Add late_initcall to disable unused PM domains")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231227-topic-pmdomain_sync_cleanup-v1-1-5f36769d538b@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1eaea4b360 ]
fwnode_get_property_reference_args() may not be called with args argument
NULL and while OF already supports this. Add the missing NULL check.
The purpose is to be able to count the references.
Fixes: b06184acf7 ("software node: Add software_node_get_reference_args()")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231109101010.1329587-3-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af54d778a0 ]
dev_coredumpm() creates a devcoredump device and adds it
to the core kernel framework which eventually end up
sending uevent to the user space and later creates a
symbolic link to the failed device. An application
running in userspace may be interested in this symbolic
link to get the name of the failed device.
In a issue scenario, once uevent sent to the user space
it start reading '/sys/class/devcoredump/devcdX/failing_device'
to get the actual name of the device which might not been
created and it is in its path of creation.
To fix this, suppress sending uevent till the failing device
symbolic link gets created and send uevent once symbolic
link is created successfully.
Fixes: 833c95456a ("device coredump: add new device coredump class")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1700232572-25823-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01daccf748 ]
In following scenario(diagram), when one thread X running dev_coredumpm()
adds devcd device to the framework which sends uevent notification to
userspace and another thread Y reads this uevent and call to
devcd_data_write() which eventually try to delete the queued timer that
is not initialized/queued yet.
So, debug object reports some warning and in the meantime, timer is
initialized and queued from X path. and from Y path, it gets reinitialized
again and timer->entry.pprev=NULL and try_to_grab_pending() stucks.
To fix this, introduce mutex and a boolean flag to serialize the behaviour.
cpu0(X) cpu1(Y)
dev_coredump() uevent sent to user space
device_add() ======================> user space process Y reads the
uevents writes to devcd fd
which results into writes to
devcd_data_write()
mod_delayed_work()
try_to_grab_pending()
del_timer()
debug_assert_init()
INIT_DELAYED_WORK()
schedule_delayed_work()
debug_object_fixup()
timer_fixup_assert_init()
timer_setup()
do_init_timer()
/*
Above call reinitializes
the timer to
timer->entry.pprev=NULL
and this will be checked
later in timer_pending() call.
*/
timer_pending()
!hlist_unhashed_lockless(&timer->entry)
!h->pprev
/*
del_timer() checks h->pprev and finds
it to be NULL due to which
try_to_grab_pending() stucks.
*/
Link: https://lore.kernel.org/lkml/2e1f81e2-428c-f11f-ce92-eb11048cb271@quicinc.com/
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/1663073424-13663-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: af54d778a0 ("devcoredump: Send uevent once devcd is ready")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2e84dc3792 upstream.
This commit fixes a bug in commit 9ed9895370 ("driver core: Functional
dependencies tracking support") where the device link status was
incorrectly updated in the driver unbind path before all the device's
resources were released.
Fixes: 9ed9895370 ("driver core: Functional dependencies tracking support")
Cc: stable <stable@kernel.org>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Closes: https://lore.kernel.org/all/20231014161721.f4iqyroddkcyoefo@pengutronix.de/
Signed-off-by: Saravana Kannan <saravanak@google.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: James Clark <james.clark@arm.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231018013851.3303928-1-saravanak@google.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 984a4afdc8 ]
Currently, noinc writes are cached as if they were standard incrementing
writes, overwriting unrelated register values in the cache. Instead, we
want to cache the last value written to the register, as is done in the
accelerated noinc handler (regmap_noinc_readwrite).
Fixes: cdf6b11daa ("regmap: Add regmap_noinc_write API")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Link: https://lore.kernel.org/r/20231101142926.2722603-2-ben.wolsieffer@hefring.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6c2f421174 upstream.
Several core drivers and buses expect that driver_override is a
dynamically allocated memory thus later they can kfree() it.
However such assumption is not documented, there were in the past and
there are already users setting it to a string literal. This leads to
kfree() of static memory during device release (e.g. in error paths or
during unbind):
kernel BUG at ../mm/slub.c:3960!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
...
(kfree) from [<c058da50>] (platform_device_release+0x88/0xb4)
(platform_device_release) from [<c0585be0>] (device_release+0x2c/0x90)
(device_release) from [<c0a69050>] (kobject_put+0xec/0x20c)
(kobject_put) from [<c0f2f120>] (exynos5_clk_probe+0x154/0x18c)
(exynos5_clk_probe) from [<c058de70>] (platform_drv_probe+0x6c/0xa4)
(platform_drv_probe) from [<c058b7ac>] (really_probe+0x280/0x414)
(really_probe) from [<c058baf4>] (driver_probe_device+0x78/0x1c4)
(driver_probe_device) from [<c0589854>] (bus_for_each_drv+0x74/0xb8)
(bus_for_each_drv) from [<c058b48c>] (__device_attach+0xd4/0x16c)
(__device_attach) from [<c058a638>] (bus_probe_device+0x88/0x90)
(bus_probe_device) from [<c05871fc>] (device_add+0x3dc/0x62c)
(device_add) from [<c075ff10>] (of_platform_device_create_pdata+0x94/0xbc)
(of_platform_device_create_pdata) from [<c07600ec>] (of_platform_bus_create+0x1a8/0x4fc)
(of_platform_bus_create) from [<c0760150>] (of_platform_bus_create+0x20c/0x4fc)
(of_platform_bus_create) from [<c07605f0>] (of_platform_populate+0x84/0x118)
(of_platform_populate) from [<c0f3c964>] (of_platform_default_populate_init+0xa0/0xb8)
(of_platform_default_populate_init) from [<c01031f8>] (do_one_initcall+0x8c/0x404)
Provide a helper which clearly documents the usage of driver_override.
This will allow later to reuse the helper and reduce the amount of
duplicated code.
Convert the platform driver to use a new helper and make the
driver_override field const char (it is not modified by the core).
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6df843348 upstream.
Not all regmaps have a name so make sure to check for that to avoid
dereferencing a NULL pointer when dev_get_regmap() is used to lookup a
named regmap.
Fixes: e84861fec3 ("regmap: dev_get_regmap_match(): fix string comparison")
Cc: stable@vger.kernel.org # 5.8
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231006082104.16707-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7a795ac8d4 ]
When regcache_rbtree_write() creates a new rbtree_node it was passing the
wrong bit number to regcache_rbtree_set_register(). The bit number is the
offset __in number of registers__, but in the case of creating a new block
regcache_rbtree_write() was not dividing by the address stride to get the
number of registers.
Fix this by dividing by map->reg_stride.
Compare with regcache_rbtree_read() where the bit is checked.
This bug meant that the wrong register was marked as present. The register
that was written to the cache could not be read from the cache because it
was not marked as cached. But a nearby register could be marked as having
a cached value even if it was never written to the cache.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 3f4ff561bc ("regmap: rbtree: Make cache_present bitmap per node")
Link: https://lore.kernel.org/r/20230922153711.28103-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22d2381bbd ]
The test_platform_device_register_node() function should return error
pointers instead of NULL. That is what the callers are expecting.
Fixes: 57ea974fb8 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/1e11ed19-e1f6-43d8-b352-474134b7c008@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c9d2eb5e9 ]
The SMBus I2C buses have limits on the size of transfers they can do but
do not factor in the register length meaning we may try to do a transfer
longer than our length limit, the core will not take care of this.
Future changes will factor this out into the core but there are a number
of users that assume current behaviour so let's just do something
conservative here.
This does not take account padding bits but practically speaking these
are very rarely if ever used on I2C buses given that they generally run
slowly enough to mean there's no issue.
Cc: stable@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230712-regmap-max-transfer-v1-2-80e2aed22e83@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c111566bea ]
pm_runtime_get_if_in_use() bumps up the PM-runtime usage count if it
is not equal to zero and the device's PM-runtime status is 'active'.
This works for drivers that do not use autoidle, but for those that
do, the function returns zero even when the device is active.
In order to maintain sane device state while the device is powered on
in the hope that it'll be needed, pm_runtime_get_if_active(dev, true)
returns a positive value if the device's PM-runtime status is 'active'
when it is called, in which case it also increments the device's usage
count.
If the second argument of pm_runtime_get_if_active() is 'false', the
function behaves just like pm_runtime_get_if_in_use(), so redefine
the latter as a wrapper around the former.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 81302b1c7c ("ALSA: hda: Fix unhandled register update during auto-suspend period")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d229290689 ]
Add tracepoints to remaining places where device's power.usage_count
is changed.
This helps debugging where and why autosuspend is prevented.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 81302b1c7c ("ALSA: hda: Fix unhandled register update during auto-suspend period")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 074b3aad30 upstream.
There are two literal blocks there. Fix the markups, in order
to produce the right html output and solve those warnings:
./drivers/base/core.c:4218: WARNING: Unexpected indentation.
./drivers/base/core.c:4222: WARNING: Definition list ends without a blank line; unexpected unindent.
./drivers/base/core.c:4223: WARNING: Block quote ends without a blank line; unexpected unindent.
Fixes: a787e5400a ("driver core: add device probe log helper")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8527beb120 ]
The decision whether to enable a wake irq during suspend can not be done
based on the runtime PM state directly as a driver may use wake irqs
without implementing runtime PM. Such drivers specifically leave the
state set to the default 'suspended' and the wake irq is thus never
enabled at suspend.
Add a new wake irq flag to track whether a dedicated wake irq has been
enabled at runtime suspend and therefore must not be enabled at system
suspend.
Note that pm_runtime_enabled() can not be used as runtime PM is always
disabled during late suspend.
Fixes: 69728051f5 ("PM / wakeirq: Fix unbalanced IRQ enable for wakeirq")
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 259714100d ]
When the dedicated wake IRQ is level trigger, and it uses the
device's low-power status as the wakeup source, that means if the
device is not in low-power state, the wake IRQ will be triggered
if enabled; For this case, need enable the wake IRQ after running
the device's ->runtime_suspend() which make it enter low-power state.
e.g.
Assume the wake IRQ is a low level trigger type, and the wakeup
signal comes from the low-power status of the device.
The wakeup signal is low level at running time (0), and becomes
high level when the device enters low-power state (runtime_suspend
(1) is called), a wakeup event at (2) make the device exit low-power
state, then the wakeup signal also becomes low level.
------------------
| ^ ^|
---------------- | | --------------
|<---(0)--->|<--(1)--| (3) (2) (4)
if enable the wake IRQ before running runtime_suspend during (0),
a wake IRQ will arise, it causes resume immediately;
it works if enable wake IRQ ( e.g. at (3) or (4)) after running
->runtime_suspend().
This patch introduces a new status WAKE_IRQ_DEDICATED_REVERSE to
optionally support enabling wake IRQ after running ->runtime_suspend().
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 8527beb120 ("PM: sleep: wakeirq: fix wake irq arming")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a787e5400a ]
During probe every time driver gets resource it should usually check for
error printk some message if it is not -EPROBE_DEFER and return the error.
This pattern is simple but requires adding few lines after any resource
acquisition code, as a result it is often omitted or implemented only
partially.
dev_err_probe helps to replace such code sequences with simple call,
so code:
if (err != -EPROBE_DEFER)
dev_err(dev, ...);
return err;
becomes:
return dev_err_probe(dev, err, ...);
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200713144324.23654-2-a.hajda@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: ef45e8400f ("net: ll_temac: fix error checking of irq_of_parse_and_map()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8974eb5882 upstream
Gather Data Sampling (GDS) is a hardware vulnerability which allows
unprivileged speculative access to data which was previously stored in
vector registers.
Intel processors that support AVX2 and AVX512 have gather instructions
that fetch non-contiguous data elements from memory. On vulnerable
hardware, when a gather instruction is transiently executed and
encounters a fault, stale data from architectural or internal vector
registers may get transiently stored to the destination vector
register allowing an attacker to infer the stale data using typical
side channel techniques like cache timing attacks.
This mitigation is different from many earlier ones for two reasons.
First, it is enabled by default and a bit must be set to *DISABLE* it.
This is the opposite of normal mitigation polarity. This means GDS can
be mitigated simply by updating microcode and leaving the new control
bit alone.
Second, GDS has a "lock" bit. This lock bit is there because the
mitigation affects the hardware security features KeyLocker and SGX.
It needs to be enabled and *STAY* enabled for these features to be
mitigated against GDS.
The mitigation is enabled in the microcode by default. Disable it by
setting gather_data_sampling=off or by disabling all mitigations with
mitigations=off. The mitigation status can be checked by reading:
/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e5d1c87220 ]
Currently, while calculating residency and latency values, right
operands may overflow if resulting values are big enough.
To prevent this, albeit unlikely case, play it safe and convert
right operands to left ones' type s64.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 30f604283e ("PM / Domains: Allow domain power states to be read from DT")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3981514180 upstream.
Currently, when regmap_raw_write() splits the data, it uses the
max_raw_write value defined for the bus. For any bus that includes
the target register address in the max_raw_write value, the chunked
transmission will always exceed the maximum transmission length.
To avoid this problem, subtract the length of the register and the
padding from the maximum transmission.
Signed-off-by: Jim Wylder <jwylder@google.com
Link: https://lore.kernel.org/r/20230517152444.3690870-2-jwylder@google.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fd883d79e4 ]
There is no sense in doing a cache sync on REGCACHE_NONE regmaps.
Instead of panicking the kernel due to missing cache_ops, return an error
to client driver.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230313071812.13577-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43e76d463c ]
There are many places where both the fwnode_handle and the of_node of a
device need to be populated. Add a function which does both so that we
have consistency.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: a26cc29343 ("drm/mipi-dsi: Set the fwnode for mipi_dsi_device")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58d7668242 ]
For CONFIG_NO_HZ_FULL systems, the tick_do_timer_cpu cannot be offlined.
However, cpu_is_hotpluggable() still returns true for those CPUs. This causes
torture tests that do offlining to end up trying to offline this CPU causing
test failures. Such failure happens on all architectures.
Fix the repeated error messages thrown by this (even if the hotplug errors are
harmless) by asking the opinion of the nohz subsystem on whether the CPU can be
hotplugged.
[ Apply Frederic Weisbecker feedback on refactoring tick_nohz_cpu_down(). ]
For drivers/base/ portion:
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: rcu <rcu@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 2987557f52 ("driver-core/cpu: Expose hotpluggability to the rest of the kernel")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d87ae48ce ]
The genpd infrastructure uses the terms master/slave, but such uses have
no external exposures (not even in Documentation/driver-api/pm/*) and are
not mandated by nor associated with any external specifications. Change
the language used through-out to parent/child.
There was one possible exception in the debugfs node
"pm_genpd/pm_genpd_summary" but its path has no hits outside of the
kernel itself when performing a code search[1], and it seems even this
single usage has been non-functional since it was introduced due to a
typo in the Python ("apend" instead of correct "append"). Fix the typo
while we're at it.
Link: https://codesearch.debian.net/ # [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: f19c3c2959 ("scripts/gdb: bail early if there are no generic PD")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9be182da0a ]
In test_async_probe_init, second set of asynchronous devices are saved
in sync_dev[sync_id], which should be async_dev[async_id].
This makes these devices not unregistered when exit.
> modprobe test_async_driver_probe && \
> modprobe -r test_async_driver_probe && \
> modprobe test_async_driver_probe
...
> sysfs: cannot create duplicate filename '/devices/platform/test_async_driver.4'
> kobject_add_internal failed for test_async_driver.4 with -EEXIST,
don't try to register things with the same name in the same directory.
Fixes: 57ea974fb8 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221125063541.241328-1-chenzhongjin@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 27c0d21734 upstream.
When a driver registers with a bus, it will attempt to match with every
device on the bus through the __driver_attach() function. Currently, if
the bus_type.match() function encounters an error that is not
-EPROBE_DEFER, __driver_attach() will return a negative error code, which
causes the driver registration logic to stop trying to match with the
remaining devices on the bus.
This behavior is not correct; a failure while matching a driver to a
device does not mean that the driver won't be able to match and bind
with other devices on the bus. Update the logic in __driver_attach()
to reflect this.
Fixes: 656b8035b0 ("ARM: 8524/1: driver cohandle -EPROBE_DEFER from bus_type.match()")
Cc: stable@vger.kernel.org
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20220921001414.4046492-1-isaacmanjarres@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8c3e8a6bdb ]
If class_add_groups() returns error, the 'cp->subsys' need be
unregister, and the 'cp' need be freed.
We can not call kset_unregister() here, because the 'cls' will
be freed in callback function class_release() and it's also
freed in caller's error path, it will cause double free.
So fix this by calling kobject_del() and kfree_const(name) to
cleanup kobject. Besides, call kfree() to free the 'cp'.
Fault injection test can trigger this:
unreferenced object 0xffff888102fa8190 (size 8):
comm "modprobe", pid 502, jiffies 4294906074 (age 49.296s)
hex dump (first 8 bytes):
70 6b 74 63 64 76 64 00 pktcdvd.
backtrace:
[<00000000e7c7703d>] __kmalloc_track_caller+0x1ae/0x320
[<000000005e4d70bc>] kstrdup+0x3a/0x70
[<00000000c2e5e85a>] kstrdup_const+0x68/0x80
[<000000000049a8c7>] kvasprintf_const+0x10b/0x190
[<0000000029123163>] kobject_set_name_vargs+0x56/0x150
[<00000000747219c9>] kobject_set_name+0xab/0xe0
[<0000000005f1ea4e>] __class_register+0x15c/0x49a
unreferenced object 0xffff888037274000 (size 1024):
comm "modprobe", pid 502, jiffies 4294906074 (age 49.296s)
hex dump (first 32 bytes):
00 40 27 37 80 88 ff ff 00 40 27 37 80 88 ff ff .@'7.....@'7....
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
backtrace:
[<00000000151f9600>] kmem_cache_alloc_trace+0x17c/0x2f0
[<00000000ecf3dd95>] __class_register+0x86/0x49a
Fixes: ced6473e74 ("driver core: class: add class_groups support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221026082803.3458760-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc80c2e438 ]
Calling __rpm_callback() from rpm_idle() after adding device links
support to the former is a clear mistake.
Not only it causes rpm_idle() to carry out unnecessary actions, but it
is also against the assumption regarding the stability of PM-runtime
status across __rpm_callback() invocations, because rpm_suspend() and
rpm_resume() may run in parallel with __rpm_callback() when it is called
by rpm_idle() and the device's PM-runtime status can be updated by any
of them.
Fixes: 21d5c57b37 ("PM / runtime: Use device links")
Link: https://lore.kernel.org/linux-pm/36aed941-a73e-d937-2721-4f0decd61ce0@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a2bd1b1c6 ]
When pm_runtime_no_callbacks() has been called for a struct device to set
the dev->power.no_callbacks flag for it, it enables rpm_idle() to take a
slightly quicker path by assuming that a ->runtime_idle() callback would
have returned 0 to indicate success.
A device that does not have the dev->power.no_callbacks flag set for it,
may still be missing a corresponding ->runtime_idle() callback, in which
case the slower path in rpm_idle() is taken. Let's improve the behaviour
for this case, by aligning code to the quicker path.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: bc80c2e438 ("PM: runtime: Do not call __rpm_callback() from rpm_idle()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0c57a5c70 ]
Platforms can provide the information about the availability of each
idle states via status flag. Platforms may have to disable one or more
idle states for various reasons like broken firmware or other unmet
dependencies.
Fix handling of such unavailable/disabled idle states by ignoring them
while parsing the states.
Fixes: a3381e3a65 ("PM / domains: Fix up domain-idle-states OF parsing")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 456797da79 upstream.
arm64's method of defining a default cpu topology requires only minimal
changes to apply to RISC-V also. The current arm64 implementation exits
early in a uniprocessor configuration by reading MPIDR & claiming that
uniprocessor can rely on the default values.
This is appears to be a hangover from prior to '3102bc0e6ac7 ("arm64:
topology: Stop using MPIDR for topology information")', because the
current code just assigns default values for multiprocessor systems.
With the MPIDR references removed, store_cpu_topolgy() can be moved to
the common arch_topology code.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25e9fbf0fd upstream.
Both __device_attach_driver() and __driver_attach() check the return
code of the bus_type.match() function to see if the device needs to be
added to the deferred probe list. After adding the device to the list,
the logic attempts to bind the device to the driver anyway, as if the
device had matched with the driver, which is not correct.
If __device_attach_driver() detects that the device in question is not
ready to match with a driver on the bus, then it doesn't make sense for
the device to attempt to bind with the current driver or continue
attempting to match with any of the other drivers on the bus. So, update
the logic in __device_attach_driver() to reflect this.
If __driver_attach() detects that a driver tried to match with a device
that is not ready to match yet, then the driver should not attempt to bind
with the device. However, the driver can still attempt to match and bind
with other devices on the bus, as drivers can be bound to multiple
devices. So, update the logic in __driver_attach() to reflect this.
Fixes: 656b8035b0 ("ARM: 8524/1: driver cohandle -EPROBE_DEFER from bus_type.match()")
Cc: stable@vger.kernel.org
Cc: Saravana Kannan <saravanak@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20220817184026.3468620-1-isaacmanjarres@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 70fe758352 ]
In __driver_attach function, There are also AA deadlock problem,
like the commit b232b02bf3 ("driver core: fix deadlock in
__device_attach").
stack like commit b232b02bf3 ("driver core: fix deadlock in
__device_attach").
list below:
In __driver_attach function, The lock holding logic is as follows:
...
__driver_attach
if (driver_allows_async_probing(drv))
device_lock(dev) // get lock dev
async_schedule_dev(__driver_attach_async_helper, dev); // func
async_schedule_node
async_schedule_node_domain(func)
entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC);
/* when fail or work limit, sync to execute func, but
__driver_attach_async_helper will get lock dev as
will, which will lead to A-A deadlock. */
if (!entry || atomic_read(&entry_count) > MAX_WORK) {
func;
else
queue_work_node(node, system_unbound_wq, &entry->work)
device_unlock(dev)
As above show, when it is allowed to do async probes, because of
out of memory or work limit, async work is not be allowed, to do
sync execute instead. it will lead to A-A deadlock because of
__driver_attach_async_helper getting lock dev.
Reproduce:
and it can be reproduce by make the condition
(if (!entry || atomic_read(&entry_count) > MAX_WORK)) untenable, like
below:
[ 370.785650] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
this message.
[ 370.787154] task:swapper/0 state:D stack: 0 pid: 1 ppid:
0 flags:0x00004000
[ 370.788865] Call Trace:
[ 370.789374] <TASK>
[ 370.789841] __schedule+0x482/0x1050
[ 370.790613] schedule+0x92/0x1a0
[ 370.791290] schedule_preempt_disabled+0x2c/0x50
[ 370.792256] __mutex_lock.isra.0+0x757/0xec0
[ 370.793158] __mutex_lock_slowpath+0x1f/0x30
[ 370.794079] mutex_lock+0x50/0x60
[ 370.794795] __device_driver_lock+0x2f/0x70
[ 370.795677] ? driver_probe_device+0xd0/0xd0
[ 370.796576] __driver_attach_async_helper+0x1d/0xd0
[ 370.797318] ? driver_probe_device+0xd0/0xd0
[ 370.797957] async_schedule_node_domain+0xa5/0xc0
[ 370.798652] async_schedule_node+0x19/0x30
[ 370.799243] __driver_attach+0x246/0x290
[ 370.799828] ? driver_allows_async_probing+0xa0/0xa0
[ 370.800548] bus_for_each_dev+0x9d/0x130
[ 370.801132] driver_attach+0x22/0x30
[ 370.801666] bus_add_driver+0x290/0x340
[ 370.802246] driver_register+0x88/0x140
[ 370.802817] ? virtio_scsi_init+0x116/0x116
[ 370.803425] scsi_register_driver+0x1a/0x30
[ 370.804057] init_sd+0x184/0x226
[ 370.804533] do_one_initcall+0x71/0x3a0
[ 370.805107] kernel_init_freeable+0x39a/0x43a
[ 370.805759] ? rest_init+0x150/0x150
[ 370.806283] kernel_init+0x26/0x230
[ 370.806799] ret_from_fork+0x1f/0x30
To fix the deadlock, move the async_schedule_dev outside device_lock,
as we can see, in async_schedule_node_domain, the parameter of
queue_work_node is system_unbound_wq, so it can accept concurrent
operations. which will also not change the code logic, and will
not lead to deadlock.
Fixes: ef0ff68351 ("driver core: Probe devices asynchronously instead of the driver")
Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com>
Link: https://lore.kernel.org/r/20220622074327.497102-1-zhangwensheng5@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 485037ae9a ]
When enabling a type_in_mask irq, the type_buf contents must be
AND'd with the mask of the IRQ we're enabling to avoid enabling
other IRQs by accident, which can happen if several type_in_mask
irqs share a mask register.
Fixes: bc998a7303 ("regmap: irq: handle HW using separate rising/falling edge interrupts")
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220620200644.1961936-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8d50cdf8b8 upstream
Add the sysfs reporting file for Processor MMIO Stale Data
vulnerability. It exposes the vulnerability and mitigation state similar
to the existing files for the other hardware vulnerabilities.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b232b02bf3 ]
In __device_attach function, The lock holding logic is as follows:
...
__device_attach
device_lock(dev) // get lock dev
async_schedule_dev(__device_attach_async_helper, dev); // func
async_schedule_node
async_schedule_node_domain(func)
entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC);
/* when fail or work limit, sync to execute func, but
__device_attach_async_helper will get lock dev as
well, which will lead to A-A deadlock. */
if (!entry || atomic_read(&entry_count) > MAX_WORK) {
func;
else
queue_work_node(node, system_unbound_wq, &entry->work)
device_unlock(dev)
As shown above, when it is allowed to do async probes, because of
out of memory or work limit, async work is not allowed, to do
sync execute instead. it will lead to A-A deadlock because of
__device_attach_async_helper getting lock dev.
To fix the deadlock, move the async_schedule_dev outside device_lock,
as we can see, in async_schedule_node_domain, the parameter of
queue_work_node is system_unbound_wq, so it can accept concurrent
operations. which will also not change the code logic, and will
not lead to deadlock.
Fixes: 765230b5f0 ("driver-core: add asynchronous probing support for drivers")
Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com>
Link: https://lore.kernel.org/r/20220518074516.1225580-1-zhangwensheng5@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
