Because __thermal_zone_get_trip() is only called by thermal_zone_get_trip()
now, fold the former into the latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/22339769.EfDdHjke4D@rjwysocki.net
Out of several drivers implementing the .set_trip_temp() thermal zone
operation, three don't actually use the trip ID argument passed to it,
two call __thermal_zone_get_trip() to get a struct thermal_trip
corresponding to the given trip ID, and the other use the trip ID as an
index into their own data structures with the assumption that it will
always match the ordering of entries in the trips table passed to the
core during thermal zone registration, which is fragile and not really
guaranteed.
Even though the trip IDs used by the core are in fact their indices in the
trips table passed to it by the thermal zone creator, that is purely a
matter of convenience and should not be relied on for correctness.
For this reason, modify trip_point_temp_store() to pass a (const) trip
pointer to .set_trip_temp() and adjust the drivers implementing it
accordingly.
This helps to simplify the drivers invoking __thermal_zone_get_trip()
from their .set_trip_temp() callback functions because they will not
need to do it now and the other drivers can store their internal
trip indices in the priv field in struct thermal_trip and their
.set_trip_temp() callback functions can get those indices from there.
The intel_quark_dts thermal driver can instead use the trip type to
determine the requisite trip index.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8392906.T7Z3S40VBb@rjwysocki.net
[ rjw: Add missing colon and 2 empty code lines ]
[ rjw: Add missing change in imx_thermal.c and adjust the changelog ]
[ rjw: Drop an unused local variable ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because the IMX thermal driver does not flag its critical trip as
writable, imx_set_trip_temp() will never be invoked for it and so the
critical trip check can be dropped from there.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2272035.iZASKD2KPV@rjwysocki.net
Some drivers will need to store integers in the priv field of struct
thermal_trip, so add conversion macros for doing this in a consistent
way and switch over the int340x_thermal driver that already does it and
uses custom conversion functions to using the new macros.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3297884.aeNJFYEL58@rjwysocki.net
Introduce a new helper function thermal_trip_is_bound_to_cdev() for
checking whether or not a given trip point has been bound to a given
cooling device.
The primary user of it will be the Tegra thermal driver.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/13545762.uLZWGnKmhe@rjwysocki.net
It is better to use unsigned int as the data type for the passive_delay
and polling_delay arguments of thermal_zone_device_register_with_trips()
because they are implicitly cast to unsigned int anyway in
thermal_set_delay_jiffies() and if they happen to be negative at that
point, the resulting behavior may not be as desired.
Update the thermal_zone_device_register_with_trips() definition
accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/5803791.DvuYhMxLoT@rjwysocki.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The 'type' string passed to thermal_of_cooling_device_register() is a
'const char *', so do the same in the devm interface.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703083141.96013-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is generally inefficient to iterate over trip indices and call
thermal_zone_get_trip() every time to get the struct thermal_trip
corresponding to the given trip index, so modify the uniphier thermal
driver to use thermal_zone_for_each_trip() for walking trips.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://patch.msgid.link/2148114.bB369e8A3T@kreacher
[ rjw: Add missing return statement, remove unused local variable ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge thermal core changes for v6.11:
- Fix and clean up several minor shortcomings in thermal debug (Rafael
Wysocki).
- Rename __thermal_zone_set_trips() to thermal_zone_set_trips() and
make it use trip thresholds (Rafael Wysocki).
- Use READ_ONCE() for lockless access to trip temperature and
hysteresis (Rafael Wysocki).
- Drop unnecessary cooling device target state checks from the
Bang-Bang thermal governor (Rafael Wysocki).
- Avoid invoking thermal governor .trip_crossed() callback for critical
and hot trip points (Rafael Wysocki).
* thermal-core:
thermal: core: Avoid calling .trip_crossed() for critical and hot trips
thermal: gov_bang_bang: Drop unnecessary cooling device target state checks
thermal: trip: Use READ_ONCE() for lockless access to trip properties
thermal: trip: Make thermal_zone_set_trips() use trip thresholds
thermal: trip: Rename __thermal_zone_set_trips() to thermal_zone_set_trips()
thermal: trip: Use common set of trip type names
thermal/debugfs: Move some statements from under thermal_dbg->lock
thermal/debugfs: Compute maximum temperature for mitigation episode as a whole
thermal/debugfs: Adjust check for trips without statistics in tze_seq_show()
thermal/debugfs: Fix up units in "mitigations" files
thermal/debugfs: Print mitigation timestamp value in milliseconds
thermal/debugfs: Do not extend mitigation episodes beyond system resume
thermal/debugfs: Use helper to update trip point overstepping duration
Commit b684682698 ("thermal: gov_step_wise: Restore passive polling
management") attempted to fix a Step-Wise thermal governor issue
introduced by commit 042a3d80f1 ("thermal: core: Move passive polling
management to the core"), which caused the governor to leave cooling
devices in high states, by partially reverting that commit.
However, this turns out to be insufficient on some systems due to
interactions between the governor code restored by commit b684682698
and the passive polling management in the thermal core.
For this reason, revert commit b684682698 and make the governor set
the target cooling device state to the "lower" one as soon as the zone
temperature falls below the threshold of the trip point corresponding
to the given thermal instance, which means that thermal mitigation is
not necessary any more.
Before this change the "lower" cooling device state would be reached in
steps through the passive polling mechanism which was questionable for
three reasons: (1) cooling device were kept in high states when that was
not necessary (and it could adversely impact performance), (2) it only
worked for thermal zones with nonzero passive_delay_jiffies value, and
(3) passive polling belongs to the core and should not be hijacked by
governors for their internal purposes.
Fixes: b684682698 ("thermal: gov_step_wise: Restore passive polling management")
Closes: https://lore.kernel.org/linux-pm/6759ce9f-281d-4fcd-bb4c-b784a1cc5f6e@oldschoolsolutions.biz
Reported-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Link: https://patch.msgid.link/12464461.O9o76ZdvQC@rjwysocki.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
- Remove the filtered mode for mt8188 from lvts_thermal as it is not
supported on this platform and fail the lvts_thermal initialization
when the golden temperature is zero as that means the efuse data is
not correctly set (Julien Panis).
- Update the processor_thermal part of the Intel int340x driver to
support shared interrupts as the processor thermal device interrupt
may in fact be shared with PCI devices (Srinivas Pandruvada).
- Synchronize the suspend-prepare and post-suspend actions of the
thermal PM notifier to avoid a destructive race condition and
change the priority of that notifier to the minimum to avoid
interference between the work items spawned by it and the other
PM notifiers during system resume (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=qXau
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix the Mediatek lvts_thermal driver, the Intel int340x driver,
and the thermal core (two issues related to system suspend).
Specifics:
- Remove the filtered mode for mt8188 from lvts_thermal as it is not
supported on this platform and fail the lvts_thermal initialization
when the golden temperature is zero as that means the efuse data is
not correctly set (Julien Panis)
- Update the processor_thermal part of the Intel int340x driver to
support shared interrupts as the processor thermal device interrupt
may in fact be shared with PCI devices (Srinivas Pandruvada)
- Synchronize the suspend-prepare and post-suspend actions of the
thermal PM notifier to avoid a destructive race condition and
change the priority of that notifier to the minimum to avoid
interference between the work items spawned by it and the other
PM notifiers during system resume (Rafael Wysocki)"
* tag 'thermal-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: processor_thermal: Support shared interrupts
thermal: core: Change PM notifier priority to the minimum
thermal: core: Synchronize suspend-prepare and post-suspend actions
thermal/drivers/mediatek/lvts_thermal: Return error in case of invalid efuse data
thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188
On some systems the processor thermal device interrupt is shared with
other PCI devices. In this case return IRQ_NONE from the interrupt
handler when the interrupt is not for the processor thermal device.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: f0658708e8 ("thermal: int340x: processor_thermal: Use non MSI interrupts by default")
Cc: 6.7+ <stable@vger.kernel.org> # 6.7+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
platform (Julien Panis)
- Fail in case the golden temperature is zero as that means the efuse
data is not correctly set (Julien Panis)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmZvS8YACgkQqDIjiipP
6E+lHQgAsdwIcybdNpwqoD+D6heY4TsL+++h0RS4id6U5e1jvIemfUw1KaSbdaXH
w6lOwSjycl1z8+pywRZ7P1psZGIe9SGXkqoV7WsHr22JfqWToV5IX3d9HJxnvOlq
pvXPH9qJgwb4m2mRtcQq4E+WMAMoXDhbtcFNKtrRqZJOeJQlBm42pdCyTyFLU0Gg
CkQ4d1pWlVZ6hixzsBF/69kDC8aeGVQnYN32X0CkERhqg/RO0DTneGS2hwT5F6oK
icgV4aBh5oSn/gymbdqybZWWmm1dvEmgR24OtTrgNYCgPhb55/QsfHO+gU8r4HIu
q6/D5V7vDr5jZ9FTofm08I2SY2kPvQ==
=O7Iv
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.10-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge thermal driver fixes for 6.10-rc5 from Daniel Lezcano:
"- Remove the filtered mode for mt8188 as it is not supported on this
platform (Julien Panis)
- Fail in case the golden temperature is zero as that means the efuse
data is not correctly set (Julien Panis)"
* tag 'thermal-v6.10-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/mediatek/lvts_thermal: Return error in case of invalid efuse data
thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188
It is reported that commit 5a5efdaffd ("thermal: core: Resume thermal
zones asynchronously") causes battery data in sysfs on Thinkpad P1 Gen2
to become invalid after a resume from S3 (and it is necessary to reboot
the machine to restore correct battery data). Some investigation into
the problem indicated that it happened because, after the commit in
question, the ACPI battery PM notifier ran in parallel with
thermal_zone_device_resume() for one of the thermal zones which
apparently confused the platform firmware on the affected system.
While the exact reason for the firmware confusion remains unclear, it
is arguably not particularly relevant, and the expected behavior of the
affected system can be restored by making the thermal PM notifier run
at the lowest priority which avoids interference between work items
spawned by it and the other PM notifiers (that will run before those
work items now).
Fixes: 5a5efdaffd ("thermal: core: Resume thermal zones asynchronously")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218881
Reported-by: fhortner@yahoo.de
Tested-by: fhortner@yahoo.de
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit 5a5efdaffd ("thermal: core: Resume thermal zones
asynchronously") it is theoretically possible that, if a system suspend
starts immediately after a system resume, thermal_zone_device_resume()
spawned by the thermal PM notifier for one of the thermal zones at the
end of the system resume will run after the PM thermal notifier for the
suspend-prepare action. If that happens, tz->suspended set by the latter
will be reset by the former which may lead to unexpected consequences.
To avoid that race, synchronize thermal_zone_device_resume() with the
suspend-prepare thermal PM notifier with the help of additional bool
field and completion in struct thermal_zone_device.
Note that this also ensures running __thermal_zone_device_update() at
least once for each thermal zone between system resume and the following
system suspend in case it is needed to start thermal mitigation.
Fixes: 5a5efdaffd ("thermal: core: Resume thermal zones asynchronously")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch prevents from registering thermal entries and letting the
driver misbehave if efuse data is invalid. A device is not properly
calibrated if the golden temperature is zero.
Fixes: f5f633b182 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240604-mtk-thermal-calib-check-v2-1-8f258254051d@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Invoking the governor .trip_crossed() callback for critical and hot
trips is pointless because they are handled directly by the core,
so make thermal_governor_trip_crossed() avoid doing that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some cooling device target state checks in bang_bang_control()
done before setting the new target state are not necessary after
recent changes, so drop them.
Also avoid updating the target state before checking it for
unexpected values.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When accessing trip temperature and hysteresis without locking, it is
better to use READ_ONCE() to prevent compiler optimizations possibly
affecting the read from being applied.
Of course, for the READ_ONCE() to be effective, WRITE_ONCE() needs to
be used when updating their values.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Modify thermal_zone_set_trips() to use trip thresholds instead of
computing the low temperature for each trip to avoid deriving both
the high and low temperature levels from the same trip (which may
happen if the zone temperature falls into the hysteresis range of
one trip).
Accordingly, make __thermal_zone_device_update() call
thermal_zone_set_trips() later, when threshold values have been
updated for all trips.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Drop the pointless double underline prefix from the function name as per
the subject.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Use the same set of trip type names in sysfs and in the thermal debug
code output.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The tz_dbg local variable assignments in thermal_debug_tz_trip_up(),
thermal_debug_tz_trip_down(), and thermal_debug_update_trip_stats()
need not be carried out under thermal_dbg->lock, so move them from
under that lock (to avoid possible future confusion).
While at it, reorder local variable definitions in
thermal_debug_tz_trip_up() for more clarity.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Notice that the maximum temperature above the trip point must be the
same for all of the trip points involved in a given mitigation episode,
so it need not be computerd for each of them separately.
It is sufficient to compute the maximum temperature for the mitigation
episode as a whole and print it accordingly, so do that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Initialize the trip_temp field in struct trip_stats to
THERMAL_TEMP_INVALID and adjust the check for trips without
statistics in tze_seq_show() to look at that field instead of
comparing min and max.
This will mostly be useful to simplify subsequent changes.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Print temperature units as m°C rather than °mC (the meaning of which is
unclear) and add time unit to the duration column.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Because mitigation episode duration is printed in milliseconds, there
is no reason to print timestamp information for mitigation episodes in
smaller units which also makes it somewhat harder to interpret the
numbers.
Print it in milliseconds for consistency.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Because thermal zone handling by the thermal core is started from
scratch during resume from system-wide suspend, prevent the debug
code from extending mitigation episodes beyond that point by ending
the mitigation episode currently in progress, if any, for each thermal
zone.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add a helper for updating trip point overstepping duration to be called
from thermal_debug_tz_trip_down().
Subsequently, it will also be used during resume from system-wide
suspend.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Consider a thermal zone with one passive trip point, a cooling device
with 3 states (0, 1, 2) bound to it, passive polling enabled (nonzero
passive_delay_jiffies) and no regular polling (polling_delay_jiffies
equal to 0) that is managed by the Step-Wise governor. Suppose that
the initial state of the cooling device is 0 and the zone temperature
is below the trip point to start with.
When the trip point is crossed, tz->passive is incremented by the
thermal core and the governor's .manage() callback is invoked. It
sets 'throttle' to 'true' for the trip in question and
get_target_state() returns 1 for the instance corresponding to the
cooling device (say that 'upper' and 'lower' are set to 2 and 0 for
it, respectively), so its state changes to 1.
Passive polling is still active for the zone, so next time the
temperature is updated, the governor's .manage() callback will be
invoked again. If the temperature is still rising, it will change
the state of the cooling device to 2.
Now suppose that next time the zone temperature is updated, it falls
below the trip point, so tz->passive is decremented for the zone (say
it becomes 0 then) and the governor's .manage() callbacks runs.
It finds that the temperature trend for the zone is 'falling' and
'throttle' will be set to 'false' for the trip in question, so the
cooling device's state will be changed to 1. However, because
tz->polling is 0 for the zone, the governor's .manage() callback
may not be invoked again for a long time and the cooling device's
state will not be reset back to 0.
This can happen because commit 042a3d80f1 ("thermal: core: Move
passive polling management to the core") removed passive polling
management from the Step-Wise governor.
Before that change, thermal_zone_trip_update() would bump up
tz->passive when changing the target state for a thermal instance
from "no target" to a specific value and it would drop tz->passive
when changing it back to "no target" which would cause passive
polling to be active for the zone until the governor has reset the
states of all cooling devices. In particular, in the example above
tz->passive would be incremented when changing the state of the
cooling device from 0 to 1 and then it would be still nonzero when
the state of the cooling device was changed from 2 to 1.
To prevent this problem from occurring, restore the passive polling
management in the Step-Wise governor by partially reverting the
commit in question and update the comment in the restored code
to explain its role more clearly.
Fixes: 042a3d80f1 ("thermal: core: Move passive polling management to the core")
Closes: https://lore.kernel.org/linux-pm/ZmVfcEOxmjUHZTSX@hovoldconsulting.com
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is reported that commit 31a0fa0019 ("thermal/debugfs: Pass cooling
device state to thermal_debug_cdev_add()") causes the ACPI fan driver
to fail probing on some systems which turns out to be due to the _FST
control method returning an invalid value until _FSL is first evaluated
for the given fan. If this happens, the .get_cur_state() cooling device
callback returns an error and __thermal_cooling_device_register() fails
as uses that callback after commit 31a0fa0019.
Arguably, _FST should not return an invalid value even if it is
evaluated before _FSL, so this may be regarded as a platform firmware
issue, but at the same time it is not a good enough reason for failing
the cooling device registration where the initial cooling device state
is only needed to initialize a thermal debug facility.
Accordingly, modify __thermal_cooling_device_register() to avoid
calling thermal_debug_cdev_add() instead of returning an error if the
initial .get_cur_state() callback invocation fails.
Fixes: 31a0fa0019 ("thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add()")
Closes: https://lore.kernel.org/linux-acpi/20240530153727.843378-1-laura.nao@collabora.com
Reported-by: Laura Nao <laura.nao@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Laura Nao <laura.nao@collabora.com>
Filtered mode is not supported on mt8188 SoC and is the source of bad
results. Move to immediate mode which provides good temperatures.
Fixes: f4745f546e ("thermal/drivers/mediatek/lvts_thermal: Add MT8188 support")
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240516-mtk-thermal-mt8188-mode-fix-v2-1-40a317442c62@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
When a trip point becomes invalid after being crossed on the way up,
it is involved in a mitigation episode that needs to be adjusted to
compensate for the trip going away.
For this reason, introduce thermal_zone_trip_down() as a wrapper
around thermal_trip_crossed() and make thermal_zone_set_trip_temp()
call it if the new temperature of the trip at hand is equal to
THERMAL_TEMP_INVALID and it has been crossed on the way up to trigger
all of the necessary adjustments in user space, the thermal debug
code and the zone governor.
Fixes: 8c69a777e4 ("thermal: core: Fix the handling of invalid trip points")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a helper function called thermal_trip_crossed() to be invoked by
__thermal_zone_device_update() in order to notify user space, the
thermal debug code and the zone governor about trip crossing.
Subsequently, this will also be used in the case when a trip point
becomes invalid after being crossed on the way up.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit a6258fde8d ("thermal/debugfs: Make tze_seq_show() skip invalid
trips and trips with no stats") modified tze_seq_show() to skip invalid
trips, but it overlooked the fact that a trip may become invalid during
a mitigation eposide involving it, in which case its statistics should
still be reported.
For this reason, remove the invalid trip temperature check from the
main loop in tze_seq_show().
The trips that have never been valid will still be skipped after this
change because there are no statistics to report for them.
Fixes: a6258fde8d ("thermal/debugfs: Make tze_seq_show() skip invalid trips and trips with no stats")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The temperature and hysteresis of a trip point may change during a
mitigation episode it is involved in (it may even become invalid
altogether), so in order to avoid possible confusion related to that,
store the temperature and hysteresis of trip points at the time they
are crossed on the way up and print those values instead of their
current temperature and hysteresis.
Fixes: 7ef01f228c ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in here
are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally.
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3+hQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylfTwCfUyHWkDZuZ7ehdtjzfmcd4EKZBK8An3AAV99G
ox8PXMxuFTaUEdT/69FQ
=2sEo
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in
here are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Fix a typo in the description of device_get_child_node_count()
kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
scsi: Use device_show_string() helper for sysfs attributes
platform/x86: Use device_show_string() helper for sysfs attributes
perf: Use device_show_string() helper for sysfs attributes
IB/qib: Use device_show_string() helper for sysfs attributes
hwmon: Use device_show_string() helper for sysfs attributes
driver core: Add device_show_string() helper for sysfs attributes
treewide: Use sysfs_bin_attr_simple_read() helper
sysfs: Add sysfs_bin_attr_simple_read() helper
module: don't ignore sysfs_create_link() failures
driver core: Remove unused platform_notify, platform_notify_remove
- Fix and clean up the MediaTek lvts_thermal driver (Julien Panis).
- Prevent invalid trip point handling from triggering spurious trip
point crossing events and allow passive polling to stop when a
passive trip point involved in it becomes invalid (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=EjP7
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix the MediaTek lvts_thermal driver and the handling of trip
points that start as invalid and are adjusted later by user space via
sysfs.
Specifics:
- Fix and clean up the MediaTek lvts_thermal driver (Julien Panis)
- Prevent invalid trip point handling from triggering spurious trip
point crossing events and allow passive polling to stop when a
passive trip point involved in it becomes invalid (Rafael Wysocki)"
* tag 'thermal-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix the handling of invalid trip points
thermal/drivers/mediatek/lvts_thermal: Fix wrong lvts_ctrl index
thermal/drivers/mediatek/lvts_thermal: Remove unused members from struct lvts_ctrl_data
thermal/drivers/mediatek/lvts_thermal: Check NULL ptr on lvts_data
Commit 9ad18043fb ("thermal: core: Send trip crossing notifications
at init time if needed") overlooked the case when a trip point that
has started as invalid is set to a valid temperature later. Namely,
the initial threshold value for all trips is zero, so if a previously
invalid trip becomes valid and its (new) low temperature is above the
zone temperature, a spurious trip crossing notification will occur and
it may trigger the WARN_ON() in handle_thermal_trip().
To address this, set the initial threshold for all trips to INT_MAX.
There is also the case when a valid writable trip becomes invalid that
requires special handling. First, in accordance with the change
mentioned above, the trip's threshold needs to be set to INT_MAX to
avoid the same issue. Second, if the trip in question is passive and
it has been crossed by the thermal zone temperature on the way up, the
zone's passive count has been incremented and it is in the passive
polling mode, so its passive count needs to be adjusted to allow the
passive polling to be turned off eventually.
Fixes: 9ad18043fb ("thermal: core: Send trip crossing notifications at init time if needed")
Fixes: 042a3d80f1 ("thermal: core: Move passive polling management to the core")
Reported-by: Zhang Rui <zhang.rui@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Mediatek LVTS driver (Julien Panis)
- Remove the num_lvts_sensor and cal_offset fields of the
lvts_ctrl_data as they are not used. These are not functional fixes
but slight memory usage fix of the Mediatek LVTS driver (Julien
Panis)
- Fix wrong lvts_ctrl index leading to a NULL pointer dereference in
the Mediatek LVTS driver (Julien Panis)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmZDL8IACgkQqDIjiipP
6E9IGwgAlzaIbugHk6qgrkC1s6JhxdAay/sUAk4zJ7WYirtykdWS0/56hh2DL/Ub
VttvTWgDf6W4k/+gaV/hVWjEq5og82n249DSFlJmcAAcvTQ0Stk2LG2TTqRBmfb4
qPKqLoVWlMhDUlbhnNZoS04jApowRitgfOvtC1G0owqkmbzIOKryJJIbvK6VRWpm
qPo7aR99DJW7Cm3lLujyIC41PGb4vKGS2jFFFrf/s69vj40IVHw2jAHOkSJDS+H1
Jro7fTHtlf7eskg4abL9zUzDSJMJTNOTyyj8vJ0524V2I7SavZxbUBoWVfYc/OSf
gWqCZFlY6sWX7k331hhxrpWjdALlyA==
=e53Q
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.10-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge thermal driver fixes for 6.10-rc1 from Daniel Lezcano:
"- Check for a NULL pointer before using it in the probe routine of the
Mediatek LVTS driver (Julien Panis)
- Remove the num_lvts_sensor and cal_offset fields of the
lvts_ctrl_data as they are not used. These are not functional fixes
but slight memory usage fix of the Mediatek LVTS driver (Julien
Panis)
- Fix wrong lvts_ctrl index leading to a NULL pointer dereference in
the Mediatek LVTS driver (Julien Panis)"
* tag 'thermal-v6.10-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/mediatek/lvts_thermal: Fix wrong lvts_ctrl index
thermal/drivers/mediatek/lvts_thermal: Remove unused members from struct lvts_ctrl_data
thermal/drivers/mediatek/lvts_thermal: Check NULL ptr on lvts_data
- Add EINJ CXL error types to actbl1.h (Ben Cheatham).
- Add support for RAS2 table to ACPICA (Shiju Jose).
- Fix various spelling mistakes in text files and code comments in
ACPICA (Colin Ian King).
- Fix spelling and typos in ACPICA (Saket Dumbre).
- Modify ACPI_OBJECT_COMMON_HEADER (lijun).
- Add RISC-V RINTC affinity structure support to ACPICA (Haibo Xu).
- Fix CXL 3.0 structure (RDPAS) in the CEDT table (Hojin Nam).
- Add missin increment of registered GPE count to ACPICA (Daniil
Tatianin).
- Mark new ACPICA release 20240322 (Saket Dumbre).
- Add support for the AEST V2 table to ACPICA (Ruidong Tian).
- Disable -Wstringop-truncation for some ACPICA code in the kernel to
avoid a compiler warning that is not very useful (Arnd Bergmann).
- Make the kernel indicate support for several ACPI features that are
in fact supported to the platform firmware through _OSC and fix the
Generic Initiator Affinity _OSC bit (Armin Wolf).
- Make the ACPI core set the owner value for ACPI drivers, drop the
owner setting from a number of drivers and eliminate the owner
field from struct acpi_driver (Krzysztof Kozlowski).
- Rearrange fields in several structures to effectively eliminate
computations from container_of() in some cases (Andy Shevchenko).
- Do some assorted cleanups of the ACPI device enumeration code (Andy
Shevchenko).
- Make the ACPI device enumeration code skip devices with _STA values
clearly identified by the specification as invalid (Rafael Wysocki).
- Rework the handling of the NHLT table to simplify and clarify it and
drop some obsolete pieces (Cezary Rojewski).
- Add ACPI IRQ override quirks for Asus Vivobook Pro N6506MV, TongFang
GXxHRXx and GMxHGxx, and XMG APEX 17 M23 (Guenter Schafranek, Tamim
Khan, Christoffer Sandberg).
- Add reference to UEFI DSD Guide to the documentation related to the
ACPI handling of device properties (Sakari Ailus).
- Fix SRAT lookup of CFMWS ranges with numa_fill_memblks(), remove
lefover architecture-dependent code from the ACPI NUMA handling code
and simplify it on top of that (Robert Richter).
- Add a num-cs device property to specify the number of chip selects
for Intel Braswell to the ACPI LPSS (Intel SoC) driver and remove a
nested CONFIG_PM #ifdef from it (Andy Shevchenko).
- Move three x86-specific ACPI files to the x86 directory (Andy
Shevchenko).
- Mark SMO8810 accel on Dell XPS 15 9550 as always present and add a
PNP_UART1_SKIP quirk for Lenovo Blade2 tablets (Hans de Goede).
- Move acpi_blacklisted() declaration to asm/acpi.h (Kuppuswamy
Sathyanarayanan).
- Add Lunar Lake support to the ACPI DPTF driver (Sumeet Pawnikar).
- Mark the einj_driver driver's remove callback as __exit because it
cannot get unbound via sysfs (Uwe Kleine-König).
- Fix a typo in the ACPI documentation regarding the layout of sysfs
subdirectory representing the ACPI namespace (John Watts).
- Make the ACPI pfrut utility print the update_cap field during
capability query (Chen Yu).
- Add HAS_IOPORT dependencies to PNP (Niklas Schnelle).
-----BEGIN PGP SIGNATURE-----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=UiEQ
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These are ACPICA updates coming from the 20240322 release upstream, an
ACPI DPTF driver update adding new platform support for it, some new
quirks and some assorted fixes and cleanups.
Specifics:
- Add EINJ CXL error types to actbl1.h (Ben Cheatham)
- Add support for RAS2 table to ACPICA (Shiju Jose)
- Fix various spelling mistakes in text files and code comments in
ACPICA (Colin Ian King)
- Fix spelling and typos in ACPICA (Saket Dumbre)
- Modify ACPI_OBJECT_COMMON_HEADER (lijun)
- Add RISC-V RINTC affinity structure support to ACPICA (Haibo Xu)
- Fix CXL 3.0 structure (RDPAS) in the CEDT table (Hojin Nam)
- Add missin increment of registered GPE count to ACPICA (Daniil
Tatianin)
- Mark new ACPICA release 20240322 (Saket Dumbre)
- Add support for the AEST V2 table to ACPICA (Ruidong Tian)
- Disable -Wstringop-truncation for some ACPICA code in the kernel to
avoid a compiler warning that is not very useful (Arnd Bergmann)
- Make the kernel indicate support for several ACPI features that are
in fact supported to the platform firmware through _OSC and fix the
Generic Initiator Affinity _OSC bit (Armin Wolf)
- Make the ACPI core set the owner value for ACPI drivers, drop the
owner setting from a number of drivers and eliminate the owner
field from struct acpi_driver (Krzysztof Kozlowski)
- Rearrange fields in several structures to effectively eliminate
computations from container_of() in some cases (Andy Shevchenko)
- Do some assorted cleanups of the ACPI device enumeration code (Andy
Shevchenko)
- Make the ACPI device enumeration code skip devices with _STA values
clearly identified by the specification as invalid (Rafael Wysocki)
- Rework the handling of the NHLT table to simplify and clarify it
and drop some obsolete pieces (Cezary Rojewski)
- Add ACPI IRQ override quirks for Asus Vivobook Pro N6506MV,
TongFang GXxHRXx and GMxHGxx, and XMG APEX 17 M23 (Guenter
Schafranek, Tamim Khan, Christoffer Sandberg)
- Add reference to UEFI DSD Guide to the documentation related to the
ACPI handling of device properties (Sakari Ailus)
- Fix SRAT lookup of CFMWS ranges with numa_fill_memblks(), remove
lefover architecture-dependent code from the ACPI NUMA handling
code and simplify it on top of that (Robert Richter)
- Add a num-cs device property to specify the number of chip selects
for Intel Braswell to the ACPI LPSS (Intel SoC) driver and remove a
nested CONFIG_PM #ifdef from it (Andy Shevchenko)
- Move three x86-specific ACPI files to the x86 directory (Andy
Shevchenko)
- Mark SMO8810 accel on Dell XPS 15 9550 as always present and add a
PNP_UART1_SKIP quirk for Lenovo Blade2 tablets (Hans de Goede)
- Move acpi_blacklisted() declaration to asm/acpi.h (Kuppuswamy
Sathyanarayanan)
- Add Lunar Lake support to the ACPI DPTF driver (Sumeet Pawnikar)
- Mark the einj_driver driver's remove callback as __exit because it
cannot get unbound via sysfs (Uwe Kleine-König)
- Fix a typo in the ACPI documentation regarding the layout of sysfs
subdirectory representing the ACPI namespace (John Watts)
- Make the ACPI pfrut utility print the update_cap field during
capability query (Chen Yu)
- Add HAS_IOPORT dependencies to PNP (Niklas Schnelle)"
* tag 'acpi-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
ACPI/NUMA: Squash acpi_numa_memory_affinity_init() into acpi_parse_memory_affinity()
ACPI/NUMA: Squash acpi_numa_slit_init() into acpi_parse_slit()
ACPI/NUMA: Remove architecture dependent remainings
x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks()
ACPI: video: Add backlight=native quirk for Lenovo Slim 7 16ARH7
ACPI: scan: Avoid enumerating devices with clearly invalid _STA values
ACPI: Move acpi_blacklisted() declaration to asm/acpi.h
ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MV
ACPICA: AEST: Add support for the AEST V2 table
ACPI: tools: pfrut: Print the update_cap field during capability query
ACPI: property: Add reference to UEFI DSD Guide
Documentation: firmware-guide: ACPI: Fix namespace typo
PNP: add HAS_IOPORT dependencies
ACPI: resource: Do IRQ override on TongFang GXxHRXx and GMxHGxx
ACPI: resource: Do IRQ override on GMxBGxx (XMG APEX 17 M23)
ACPICA: Update acpixf.h for new ACPICA release 20240322
ACPICA: events/evgpeinit: don't forget to increment registered GPE count
ACPICA: Fix CXL 3.0 structure (RDPAS) in the CEDT table
ACPICA: SRAT: Add dump and compiler support for RINTC affinity structure
ACPICA: SRAT: Add RISC-V RINTC affinity structure
...
- Redesign the thermal governor interface to allow the governors to
work in a more straightforward way (Rafael Wysocki).
- Make thermal governors take the current trip point thresholds into
account in their computations which allows trip hysteresis to be
observed more accurately (Rafael Wysocki).
- Make the thermal core manage passive polling for thermal zones and
remove passive polling management from thermal governors (Rafael
Wysocki).
- Refactor trip point representation and move the definition of
thermal governor and thermal zone device structures to the thermal
core (Rafael Wysocki).
- Sort trip point crossing notifications and debug recording of trip
point crossing events by temperature (Rafael Wysocki).
- Improve the handling of cooling device states and thermal mitigation
episodes in progress in the thermal debug code (Rafael Wysocki).
- Avoid excessive updates of trip point statistics and clean up the
printing of thermal mitigation episode information (Rafael Wysocki).
- Clean up thermal governors and thermal core (Rafael Wysocki).
- Allow thermal drivers to register notifiers that will be invoked
on netlink events like BIND and UNBIND, so that they can adjust
their activity depending on whether or not there are any
subscribers of netlink messages coming from them, and make
the Intel HFI driver use this mechanism (Stanislaw Gruszka).
- Adjust the update delay and capabilities-per-event values in the
Intel HFI thermal driver to prevent it from missing events and allow
it to process more data in one go (Ricardo Neri).
- Add missing MODULE_DESCRIPTION() to multiple files in the
int340x_thermal and intel_soc_dts_iosf drivers (Srinivas Pandruvada).
- Replace deprecated strncpy() with strscpy() in the int340x_thermal
driver (Justin Stitt).
- Add QCM2290 compatible DT bindings for Lmh and fix a NULL pointer
dereference in the lmh driver when the SCM is not present (Konrad
Dybcio).
- Use the strreplace() function instead of doing it manually in the
Armada driver (Rasmus Villemoes).
- Convert st,stih407-thermal to DT schema and fix up missing
properties (Raphael Gallais-Pou).
- Add suspend/resume by restoring the context of the tsens sensor
(Priyansh Jain).
- Support A1 SoC family Thermal Sensor controller and add the DT
bindings (Dmitry Rokosov).
- Improve the temperature approximation calculation and consolidate
the Tj constant into a shared area of the structure instead of
duplicating it on the Rcar Gen3 (Niklas Söderlund).
- Fix the Mediatek LVTS sensor coefficient for the MT8192 in order to support
it correctly (Hsin-Te Yuan).
- Fix a NULL pointer dereference in the tsens driver when the function
compute_intercept_slope() is called with a NULL parameter (Aleksandr
Mishin).
- Remove some unused fields in struct qpnp_tm_chip and k3_bandgap
(Christophe Jaillet).
- Fix up calibration efuse data decoding, consolidate the code by
checking boundaries and refactor some part of the LVTS Mediatek
driver. After setting the scene, add MT8186 and MT8188 along with
the DT bindings (Nicolas Pitre).
- Add Loongson-2K2000 support after some minor code adjustements and
providing the DT bindings definition (Binbin Zhou).
-----BEGIN PGP SIGNATURE-----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=CzKP
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"The most significant part of this is a rework of thermal governors,
including a redesign of the thermal governor interface and changes to
make some of them take trip point hysteresis into account properly, as
well as some related cleanups of the thermal governors and thermal
core.
The above is based on preliminary changes refactoring thermal data
structures and moving the definitions of some of them into the thermal
core which also ensure that trip point crossing notifications will be
sent to user space via netlink and recorded in the debug statistics in
temperature order.
In addition, netlink bind/unbind notifications are added to the
thermal core and the Intel HFI driver is modified to use them to avoid
sending netlink messages until there are subscribers.
Apart from that, multiple thermal drivers are updated which includes
new hardware support (MediaTek MT8188 and MT8186, Amlogic A1 thermal
sensor, Loongson-2K2000, Lmh QCM2290), fixes, cleanups and
documentation updates, and the recently added thermal debug code is
fixed and cleaned up.
Specifics:
- Redesign the thermal governor interface to allow the governors to
work in a more straightforward way (Rafael Wysocki)
- Make thermal governors take the current trip point thresholds into
account in their computations which allows trip hysteresis to be
observed more accurately (Rafael Wysocki)
- Make the thermal core manage passive polling for thermal zones and
remove passive polling management from thermal governors (Rafael
Wysocki)
- Refactor trip point representation and move the definition of
thermal governor and thermal zone device structures to the thermal
core (Rafael Wysocki)
- Sort trip point crossing notifications and debug recording of trip
point crossing events by temperature (Rafael Wysocki)
- Improve the handling of cooling device states and thermal
mitigation episodes in progress in the thermal debug code (Rafael
Wysocki)
- Avoid excessive updates of trip point statistics and clean up the
printing of thermal mitigation episode information (Rafael Wysocki)
- Clean up thermal governors and thermal core (Rafael Wysocki)
- Allow thermal drivers to register notifiers that will be invoked on
netlink events like BIND and UNBIND, so that they can adjust their
activity depending on whether or not there are any subscribers of
netlink messages coming from them, and make the Intel HFI driver
use this mechanism (Stanislaw Gruszka)
- Adjust the update delay and capabilities-per-event values in the
Intel HFI thermal driver to prevent it from missing events and
allow it to process more data in one go (Ricardo Neri)
- Add missing MODULE_DESCRIPTION() to multiple files in the
int340x_thermal and intel_soc_dts_iosf drivers (Srinivas
Pandruvada)
- Replace deprecated strncpy() with strscpy() in the int340x_thermal
driver (Justin Stitt)
- Add QCM2290 compatible DT bindings for Lmh and fix a NULL pointer
dereference in the lmh driver when the SCM is not present (Konrad
Dybcio)
- Use the strreplace() function instead of doing it manually in the
Armada driver (Rasmus Villemoes)
- Convert st,stih407-thermal to DT schema and fix up missing
properties (Raphael Gallais-Pou)
- Add suspend/resume by restoring the context of the tsens sensor
(Priyansh Jain)
- Support A1 SoC family Thermal Sensor controller and add the DT
bindings (Dmitry Rokosov)
- Improve the temperature approximation calculation and consolidate
the Tj constant into a shared area of the structure instead of
duplicating it on the Rcar Gen3 (Niklas Söderlund)
- Fix the Mediatek LVTS sensor coefficient for the MT8192 in order to
support it correctly (Hsin-Te Yuan)
- Fix a NULL pointer dereference in the tsens driver when the
function compute_intercept_slope() is called with a NULL parameter
(Aleksandr Mishin)
- Remove some unused fields in struct qpnp_tm_chip and k3_bandgap
(Christophe Jaillet)
- Fix up calibration efuse data decoding, consolidate the code by
checking boundaries and refactor some part of the LVTS Mediatek
driver. After setting the scene, add MT8186 and MT8188 along with
the DT bindings (Nicolas Pitre)
- Add Loongson-2K2000 support after some minor code adjustements and
providing the DT bindings definition (Binbin Zhou)"
* tag 'thermal-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
thermal: intel: hfi: Increase the number of CPU capabilities per netlink event
thermal: intel: hfi: Rename HFI_MAX_THERM_NOTIFY_COUNT
thermal: intel: hfi: Shorten the thermal netlink event delay to 100ms
thermal: intel: hfi: Rename HFI_UPDATE_INTERVAL
thermal: intel: Add missing module description
thermal: core: Move passive polling management to the core
thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid
thermal: trip: Add missing empty code line
thermal/debugfs: Avoid printing zero duration for mitigation events in progress
thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add()
thermal/debugfs: Create records for cdev states as they get used
thermal: core: Introduce thermal_governor_trip_crossed()
thermal/debugfs: Make tze_seq_show() skip invalid trips and trips with no stats
thermal/debugfs: Rename thermal_debug_update_temp() to thermal_debug_update_trip_stats()
thermal/debugfs: Clean up thermal_debug_update_temp()
thermal/debugfs: Avoid excessive updates of trip point statistics
thermal: core: Relocate critical and hot trip handling
thermal: core: Drop the .throttle() governor callback
thermal: gov_user_space: Use .trip_crossed() instead of .throttle()
thermal: gov_fair_share: Eliminate unnecessary integer divisions
...
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt. affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt. arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix.
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=obph
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
* tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/pelt: Remove shift of thermal clock
sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()
thermal/cpufreq: Remove arch_update_thermal_pressure()
sched/cpufreq: Take cpufreq feedback into account
cpufreq: Add a cpufreq pressure feedback for the scheduler
sched/fair: Fix update of rd->sg_overutilized
sched/vtime: Do not include <asm/vtime.h> header
s390/irq,nmi: Include <asm/vtime.h> header directly
s390/vtime: Remove unused __ARCH_HAS_VTIME_TASK_SWITCH leftover
sched/vtime: Get rid of generic vtime_task_switch() implementation
sched/vtime: Remove confusing arch_vtime_task_switch() declaration
sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags
sched/fair: Rename set_rd_overutilized_status() to set_rd_overutilized()
sched/fair: Rename SG_OVERLOAD to SG_OVERLOADED
sched/fair: Rename {set|get}_rd_overload() to {set|get}_rd_overloaded()
sched/fair: Rename root_domain::overload to ::overloaded
sched/fair: Use helper functions to access root_domain::overload
sched/fair: Check root_domain::overload value before update
sched/fair: Combine EAS check with root_domain::overutilized access
sched/fair: Simplify the continue_balancing logic in sched_balance_newidle()
...
Merge x86-specific ACPI updates, an ACPI DPTF driver update adding new
platform support to it, and an ACPI APEI update:
- Add a num-cs device property to specify the number of chip selects
for Intel Braswell to the ACPI LPSS (Intel SoC) driver and remove a
nested CONFIG_PM #ifdef from it (Andy Shevchenko).
- Move three x86-specific ACPI files to the x86 directory (Andy
Shevchenko).
- Mark SMO8810 accel on Dell XPS 15 9550 as always present and add a
PNP_UART1_SKIP quirk for Lenovo Blade2 tablets (Hans de Goede).
- Move acpi_blacklisted() declaration to asm/acpi.h (Kuppuswamy
Sathyanarayanan).
- Add Lunar Lake support to the ACPI DPTF driver (Sumeet Pawnikar).
- Mark the einj_driver driver's remove callback as __exit because it
cannot get unbound via sysfs (Uwe Kleine-König).
* acpi-x86:
ACPI: Move acpi_blacklisted() declaration to asm/acpi.h
ACPI: x86: Add PNP_UART1_SKIP quirk for Lenovo Blade2 tablets
ACPI: x86: utils: Mark SMO8810 accel on Dell XPS 15 9550 as always present
ACPI: x86: Move LPSS to x86 folder
ACPI: x86: Move blacklist to x86 folder
ACPI: x86: Move acpi_cmos_rtc to x86 folder
ACPI: x86: Introduce a Makefile
ACPI: LPSS: Remove nested ifdeffery for CONFIG_PM
ACPI: LPSS: Advertise number of chip selects via property
* acpi-dptf:
ACPI: DPTF: Add Lunar Lake support
* acpi-apei:
ACPI: APEI: EINJ: mark remove callback as __exit
Merge updates of Intel thermal drivers for v6.10:
- Add missing MODULE_DESCRIPTION() to multiple files in the
int340x_thermal and intel_soc_dts_iosf drivers (Srinivas Pandruvada).
- Adjust the update delay and capabilities-per-event values in the
Intel HFI thermal driver to prevent it from missing events and allow
it to process more data in one go (Ricardo Neri).
* thermal-intel:
thermal: intel: hfi: Increase the number of CPU capabilities per netlink event
thermal: intel: hfi: Rename HFI_MAX_THERM_NOTIFY_COUNT
thermal: intel: hfi: Shorten the thermal netlink event delay to 100ms
thermal: intel: hfi: Rename HFI_UPDATE_INTERVAL
thermal: intel: Add missing module description
The number of updated CPU capabilities per netlink event is hard-coded to
16. On systems with more than 16 CPUs (a common case), it takes more than
one thermal netlink event to relay all the new capabilities after an HFI
interrupt. This adds unnecessary overhead to both the kernel and user space
entities.
Increase the number of CPU capabilities updated per event to 64. Any system
with 64 CPUs or less can now update all the capabilities in a single
thermal netlink event.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When processing a hardware update, HFI generates as many thermal netlink
events as needed to relay all the updated CPU capabilities to user space.
The constant HFI_MAX_THERM_NOTIFY_COUNT is the number of CPU capabilities
updated per each of those events.
Give this constant a more descriptive name.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
