Commit Graph

829 Commits

Author SHA1 Message Date
Linus Torvalds
0a37714f96 dlm for 6.5
The dlm posix lock handling (for gfs2) has three notable changes:
 
 - Local pids returned from GETLK are no longer negated.  A previous
   patch negating remote pids mistakenly changed local pids also.
 
 - SETLKW operations can now be interrupted only when the process is
   killed, and not from other signals.  General interruption was
   resulting in previously acquired locks being cleared, not just
   the in-progress lock.  Handling this correctly will require
   extending a cancel capability to user space (a future feature.)
 
 - If multiple threads are requesting posix locks (with SETLKW),
   fix incorrect matching of results to the requests.
 
 The dlm networking has several minor cleanups, and one notable change:
 
 - Avoid delaying ack messages for too long (used for message reliability),
   resulting in a backlog of un-acked messages.  These could previously
   be delayed as a result of either too many or too few other messages
   being sent.  Now an upper and lower threshold is used to determine
   when an ack should be sent.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJkneDWAAoJEDgbc8f8gGmqH+sP/A7MYVNHPe2uBpGwsVMjesV+
 WTfL/JFKh1Ejpgc1gdaH5qxvKdtW7EZMrwdKrqNmxaHKAVkQIAgE+W8lueH0f/EO
 u1UCdU6GXg5VCwzLlJlELrJ/FmFGnKdtcsrRDEJfBlMMH2DrJOnWYikvE7t29Yn9
 f2z8xaePyDMmC8urhIFwiikNiRxWeVCfzzEF3XK+HdCREa77ELdWidcpnq8U+gSY
 YAtHy1CR8CZ6zqHXYJrFIq2O0zFMJZTibL3XEWSQ1pusLYTE8XT7ElvN2pVV7vv8
 C0bLfoOf7PcGIyNDTAA8hkF/y8tO7C4TqoFa0ZqGZpYWvAukGeioo54qF9+rDDMi
 pRugqwn/L4zF5qMn3/k+LM0F8bBXERGVWbgp0DdJ5YohFyo3I7zvCaLeIYwEHpdz
 HSMpZtXXpAV8T3utF/s3TxOJ0hIX0v7ccJCF7ssRi7wFMru2kUZ2u0DN10ekXtc8
 xyA7rf+dpmz/qijBctmJiZViJ7sTZrnmG+dPa55KDE0DKbceMFIjIDCrmakvJQJI
 b0Cn3OfyQpuE9Aov3ZH2dQhwXgzoAMvqeTWjh0nRDzEyP3iO+NiL7Qu1OFMZ0GQZ
 BQ7JYTHGlhYtfcQJXNlCZvWHx59iBOqWWT17ZEkBVtEzt4qaCMJ1cas3aNqEnRrv
 g760Sp9RMbomS0nRNNBS
 =+TTu
 -----END PGP SIGNATURE-----

Merge tag 'dlm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm

Pull dlm updates from David Teigland:
 "The dlm posix lock handling (for gfs2) has three notable changes:

   - Local pids returned from GETLK are no longer negated. A previous
     patch negating remote pids mistakenly changed local pids also.

   - SETLKW operations can now be interrupted only when the process is
     killed, and not from other signals. General interruption was
     resulting in previously acquired locks being cleared, not just the
     in-progress lock. Handling this correctly will require extending a
     cancel capability to user space (a future feature.)

   - If multiple threads are requesting posix locks (with SETLKW), fix
     incorrect matching of results to the requests.

  The dlm networking has several minor cleanups, and one notable change:

   - Avoid delaying ack messages for too long (used for message
     reliability), resulting in a backlog of un-acked messages. These
     could previously be delayed as a result of either too many or too
     few other messages being sent. Now an upper and lower threshold is
     used to determine when an ack should be sent"

* tag 'dlm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  fs: dlm: remove filter local comms on close
  fs: dlm: add send ack threshold and append acks to msgs
  fs: dlm: handle sequence numbers as atomic
  fs: dlm: handle lkb wait count as atomic_t
  fs: dlm: filter ourself midcomms calls
  fs: dlm: warn about messages from left nodes
  fs: dlm: move dlm_purge_lkb_callbacks to user module
  fs: dlm: cleanup STOP_IO bitflag set when stop io
  fs: dlm: don't check othercon twice
  fs: dlm: unregister memory at the very last
  fs: dlm: fix missing pending to false
  fs: dlm: clear pending bit when queue was empty
  fs: dlm: revert check required context while close
  fs: dlm: fix mismatch of plock results from userspace
  fs: dlm: make F_SETLK use unkillable wait_event
  fs: dlm: interrupt posix locks only when process is killed
  fs: dlm: fix cleanup pending ops when interrupted
  fs: dlm: return positive pid value for F_GETLK
  dlm: Replace all non-returning strlcpy with strscpy
2023-06-29 13:27:50 -07:00
Linus Torvalds
3a8a670eee Networking changes for 6.5.
Core
 ----
 
  - Rework the sendpage & splice implementations. Instead of feeding
    data into sockets page by page extend sendmsg handlers to support
    taking a reference on the data, controlled by a new flag called
    MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
    to invoke an additional callback instead of trying to predict what
    the right combination of MORE/NOTLAST flags is.
    Remove the MSG_SENDPAGE_NOTLAST flag completely.
 
  - Implement SCM_PIDFD, a new type of CMSG type analogous to
    SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
 
  - Enable socket busy polling with CONFIG_RT.
 
  - Improve reliability and efficiency of reporting for ref_tracker.
 
  - Auto-generate a user space C library for various Netlink families.
 
 Protocols
 ---------
 
  - Allow TCP to shrink the advertised window when necessary, prevent
    sk_rcvbuf auto-tuning from growing the window all the way up to
    tcp_rmem[2].
 
  - Use per-VMA locking for "page-flipping" TCP receive zerocopy.
 
  - Prepare TCP for device-to-device data transfers, by making sure
    that payloads are always attached to skbs as page frags.
 
  - Make the backoff time for the first N TCP SYN retransmissions
    linear. Exponential backoff is unnecessarily conservative.
 
  - Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
 
  - Avoid waking up applications using TLS sockets until we have
    a full record.
 
  - Allow using kernel memory for protocol ioctl callbacks, paving
    the way to issuing ioctls over io_uring.
 
  - Add nolocalbypass option to VxLAN, forcing packets to be fully
    encapsulated even if they are destined for a local IP address.
 
  - Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
    in-kernel ECMP implementation (e.g. Open vSwitch) select the same
    link for all packets. Support L4 symmetric hashing in Open vSwitch.
 
  - PPPoE: make number of hash bits configurable.
 
  - Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
    (ipconfig).
 
  - Add layer 2 miss indication and filtering, allowing higher layers
    (e.g. ACL filters) to make forwarding decisions based on whether
    packet matched forwarding state in lower devices (bridge).
 
  - Support matching on Connectivity Fault Management (CFM) packets.
 
  - Hide the "link becomes ready" IPv6 messages by demoting their
    printk level to debug.
 
  - HSR: don't enable promiscuous mode if device offloads the proto.
 
  - Support active scanning in IEEE 802.15.4.
 
  - Continue work on Multi-Link Operation for WiFi 7.
 
 BPF
 ---
 
  - Add precision propagation for subprogs and callbacks. This allows
    maintaining verification efficiency when subprograms are used,
    or in fact passing the verifier at all for complex programs,
    especially those using open-coded iterators.
 
  - Improve BPF's {g,s}setsockopt() length handling. Previously BPF
    assumed the length is always equal to the amount of written data.
    But some protos allow passing a NULL buffer to discover what
    the output buffer *should* be, without writing anything.
 
  - Accept dynptr memory as memory arguments passed to helpers.
 
  - Add routing table ID to bpf_fib_lookup BPF helper.
 
  - Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
 
  - Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
    maps as read-only).
 
  - Show target_{obj,btf}_id in tracing link fdinfo.
 
  - Addition of several new kfuncs (most of the names are self-explanatory):
    - Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
      bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
      and bpf_dynptr_clone().
    - bpf_task_under_cgroup()
    - bpf_sock_destroy() - force closing sockets
    - bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
 
 Netfilter
 ---------
 
  - Relax set/map validation checks in nf_tables. Allow checking
    presence of an entry in a map without using the value.
 
  - Increase ip_vs_conn_tab_bits range for 64BIT builds.
 
  - Allow updating size of a set.
 
  - Improve NAT tuple selection when connection is closing.
 
 Driver API
 ----------
 
  - Integrate netdev with LED subsystem, to allow configuring HW
    "offloaded" blinking of LEDs based on link state and activity
    (i.e. packets coming in and out).
 
  - Support configuring rate selection pins of SFP modules.
 
  - Factor Clause 73 auto-negotiation code out of the drivers, provide
    common helper routines.
 
  - Add more fool-proof helpers for managing lifetime of MDIO devices
    associated with the PCS layer.
 
  - Allow drivers to report advanced statistics related to Time Aware
    scheduler offload (taprio).
 
  - Allow opting out of VF statistics in link dump, to allow more VFs
    to fit into the message.
 
  - Split devlink instance and devlink port operations.
 
 New hardware / drivers
 ----------------------
 
  - Ethernet:
    - Synopsys EMAC4 IP support (stmmac)
    - Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
    - Marvell 88E6250 7 port switches
    - Microchip LAN8650/1 Rev.B0 PHYs
    - MediaTek MT7981/MT7988 built-in 1GE PHY driver
 
  - WiFi:
    - Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
    - Realtek RTL8723DS (SDIO variant)
    - Realtek RTL8851BE
 
  - CAN:
    - Fintek F81604
 
 Drivers
 -------
 
  - Ethernet NICs:
    - Intel (100G, ice):
      - support dynamic interrupt allocation
      - use meta data match instead of VF MAC addr on slow-path
    - nVidia/Mellanox:
      - extend link aggregation to handle 4, rather than just 2 ports
      - spawn sub-functions without any features by default
    - OcteonTX2:
      - support HTB (Tx scheduling/QoS) offload
      - make RSS hash generation configurable
      - support selecting Rx queue using TC filters
    - Wangxun (ngbe/txgbe):
      - add basic Tx/Rx packet offloads
      - add phylink support (SFP/PCS control)
    - Freescale/NXP (enetc):
      - report TAPRIO packet statistics
    - Solarflare/AMD:
      - support matching on IP ToS and UDP source port of outer header
      - VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
      - add devlink dev info support for EF10
 
  - Virtual NICs:
    - Microsoft vNIC:
      - size the Rx indirection table based on requested configuration
      - support VLAN tagging
    - Amazon vNIC:
      - try to reuse Rx buffers if not fully consumed, useful for ARM
        servers running with 16kB pages
    - Google vNIC:
      - support TCP segmentation of >64kB frames
 
  - Ethernet embedded switches:
    - Marvell (mv88e6xxx):
      - enable USXGMII (88E6191X)
    - Microchip:
     - lan966x: add support for Egress Stage 0 ACL engine
     - lan966x: support mapping packet priority to internal switch
       priority (based on PCP or DSCP)
 
  - Ethernet PHYs:
    - Broadcom PHYs:
      - support for Wake-on-LAN for BCM54210E/B50212E
      - report LPI counter
    - Microsemi PHYs: support RGMII delay configuration (VSC85xx)
    - Micrel PHYs: receive timestamp in the frame (LAN8841)
    - Realtek PHYs: support optional external PHY clock
    - Altera TSE PCS: merge the driver into Lynx PCS which it is
      a variant of
 
  - CAN: Kvaser PCIEcan:
    - support packet timestamping
 
  - WiFi:
    - Intel (iwlwifi):
      - major update for new firmware and Multi-Link Operation (MLO)
      - configuration rework to drop test devices and split
        the different families
      - support for segmented PNVM images and power tables
      - new vendor entries for PPAG (platform antenna gain) feature
    - Qualcomm 802.11ax (ath11k):
      - Multiple Basic Service Set Identifier (MBSSID) and
        Enhanced MBSSID Advertisement (EMA) support in AP mode
      - support factory test mode
    - RealTek (rtw89):
      - add RSSI based antenna diversity
      - support U-NII-4 channels on 5 GHz band
    - RealTek (rtl8xxxu):
      - AP mode support for 8188f
      - support USB RX aggregation for the newer chips
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmSbJM4ACgkQMUZtbf5S
 IrtoDhAAhEim1+LBIKf4lhPcVdZ2p/TkpnwTz5jsTwSeRBAxTwuNJ2fQhFXg13E3
 MnRq6QaEp8G4/tA/gynLvQop+FEZEnv+horP0zf/XLcC8euU7UrKdrpt/4xxdP07
 IL/fFWsoUGNO+L9LNaHwBo8g7nHvOkPscHEBHc2Xrvzab56TJk6vPySfLqcpKlNZ
 CHWDwTpgRqNZzSKiSpoMVd9OVMKUXcPYHpDmfEJ5l+e8vTXmZzOLHrSELHU5nP5f
 mHV7gxkDCTshoGcaed7UTiOvgu1p6E5EchDJxiLaSUbgsd8SZ3u4oXwRxgj33RK/
 fB2+UaLrRt/DdlHvT/Ph8e8Ygu77yIXMjT49jsfur/zVA0HEA2dFb7V6QlsYRmQp
 J25pnrdXmE15llgqsC0/UOW5J1laTjII+T2T70UOAqQl4LWYAQDG4WwsAqTzU0KY
 dueydDouTp9XC2WYrRUEQxJUzxaOaazskDUHc5c8oHp/zVBT+djdgtvVR9+gi6+7
 yy4elI77FlEEqL0ItdU/lSWINayAlPLsIHkMyhSGKX0XDpKjeycPqkNx4UterXB/
 JKIR5RBWllRft+igIngIkKX0tJGMU0whngiw7d1WLw25wgu4sB53hiWWoSba14hv
 tXMxwZs5iGaPcT38oRVMZz8I1kJM4Dz3SyI7twVvi4RUut64EG4=
 =9i4I
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Jakub Kicinski:
 "WiFi 7 and sendpage changes are the biggest pieces of work for this
  release. The latter will definitely require fixes but I think that we
  got it to a reasonable point.

  Core:

   - Rework the sendpage & splice implementations

     Instead of feeding data into sockets page by page extend sendmsg
     handlers to support taking a reference on the data, controlled by a
     new flag called MSG_SPLICE_PAGES

     Rework the handling of unexpected-end-of-file to invoke an
     additional callback instead of trying to predict what the right
     combination of MORE/NOTLAST flags is

     Remove the MSG_SENDPAGE_NOTLAST flag completely

   - Implement SCM_PIDFD, a new type of CMSG type analogous to
     SCM_CREDENTIALS, but it contains pidfd instead of plain pid

   - Enable socket busy polling with CONFIG_RT

   - Improve reliability and efficiency of reporting for ref_tracker

   - Auto-generate a user space C library for various Netlink families

  Protocols:

   - Allow TCP to shrink the advertised window when necessary, prevent
     sk_rcvbuf auto-tuning from growing the window all the way up to
     tcp_rmem[2]

   - Use per-VMA locking for "page-flipping" TCP receive zerocopy

   - Prepare TCP for device-to-device data transfers, by making sure
     that payloads are always attached to skbs as page frags

   - Make the backoff time for the first N TCP SYN retransmissions
     linear. Exponential backoff is unnecessarily conservative

   - Create a new MPTCP getsockopt to retrieve all info
     (MPTCP_FULL_INFO)

   - Avoid waking up applications using TLS sockets until we have a full
     record

   - Allow using kernel memory for protocol ioctl callbacks, paving the
     way to issuing ioctls over io_uring

   - Add nolocalbypass option to VxLAN, forcing packets to be fully
     encapsulated even if they are destined for a local IP address

   - Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
     in-kernel ECMP implementation (e.g. Open vSwitch) select the same
     link for all packets. Support L4 symmetric hashing in Open vSwitch

   - PPPoE: make number of hash bits configurable

   - Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
     (ipconfig)

   - Add layer 2 miss indication and filtering, allowing higher layers
     (e.g. ACL filters) to make forwarding decisions based on whether
     packet matched forwarding state in lower devices (bridge)

   - Support matching on Connectivity Fault Management (CFM) packets

   - Hide the "link becomes ready" IPv6 messages by demoting their
     printk level to debug

   - HSR: don't enable promiscuous mode if device offloads the proto

   - Support active scanning in IEEE 802.15.4

   - Continue work on Multi-Link Operation for WiFi 7

  BPF:

   - Add precision propagation for subprogs and callbacks. This allows
     maintaining verification efficiency when subprograms are used, or
     in fact passing the verifier at all for complex programs,
     especially those using open-coded iterators

   - Improve BPF's {g,s}setsockopt() length handling. Previously BPF
     assumed the length is always equal to the amount of written data.
     But some protos allow passing a NULL buffer to discover what the
     output buffer *should* be, without writing anything

   - Accept dynptr memory as memory arguments passed to helpers

   - Add routing table ID to bpf_fib_lookup BPF helper

   - Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands

   - Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
     maps as read-only)

   - Show target_{obj,btf}_id in tracing link fdinfo

   - Addition of several new kfuncs (most of the names are
     self-explanatory):
      - Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
        bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
        and bpf_dynptr_clone().
      - bpf_task_under_cgroup()
      - bpf_sock_destroy() - force closing sockets
      - bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs

  Netfilter:

   - Relax set/map validation checks in nf_tables. Allow checking
     presence of an entry in a map without using the value

   - Increase ip_vs_conn_tab_bits range for 64BIT builds

   - Allow updating size of a set

   - Improve NAT tuple selection when connection is closing

  Driver API:

   - Integrate netdev with LED subsystem, to allow configuring HW
     "offloaded" blinking of LEDs based on link state and activity
     (i.e. packets coming in and out)

   - Support configuring rate selection pins of SFP modules

   - Factor Clause 73 auto-negotiation code out of the drivers, provide
     common helper routines

   - Add more fool-proof helpers for managing lifetime of MDIO devices
     associated with the PCS layer

   - Allow drivers to report advanced statistics related to Time Aware
     scheduler offload (taprio)

   - Allow opting out of VF statistics in link dump, to allow more VFs
     to fit into the message

   - Split devlink instance and devlink port operations

  New hardware / drivers:

   - Ethernet:
      - Synopsys EMAC4 IP support (stmmac)
      - Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
      - Marvell 88E6250 7 port switches
      - Microchip LAN8650/1 Rev.B0 PHYs
      - MediaTek MT7981/MT7988 built-in 1GE PHY driver

   - WiFi:
      - Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
      - Realtek RTL8723DS (SDIO variant)
      - Realtek RTL8851BE

   - CAN:
      - Fintek F81604

  Drivers:

   - Ethernet NICs:
      - Intel (100G, ice):
         - support dynamic interrupt allocation
         - use meta data match instead of VF MAC addr on slow-path
      - nVidia/Mellanox:
         - extend link aggregation to handle 4, rather than just 2 ports
         - spawn sub-functions without any features by default
      - OcteonTX2:
         - support HTB (Tx scheduling/QoS) offload
         - make RSS hash generation configurable
         - support selecting Rx queue using TC filters
      - Wangxun (ngbe/txgbe):
         - add basic Tx/Rx packet offloads
         - add phylink support (SFP/PCS control)
      - Freescale/NXP (enetc):
         - report TAPRIO packet statistics
      - Solarflare/AMD:
         - support matching on IP ToS and UDP source port of outer
           header
         - VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
         - add devlink dev info support for EF10

   - Virtual NICs:
      - Microsoft vNIC:
         - size the Rx indirection table based on requested
           configuration
         - support VLAN tagging
      - Amazon vNIC:
         - try to reuse Rx buffers if not fully consumed, useful for ARM
           servers running with 16kB pages
      - Google vNIC:
         - support TCP segmentation of >64kB frames

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - enable USXGMII (88E6191X)
      - Microchip:
         - lan966x: add support for Egress Stage 0 ACL engine
         - lan966x: support mapping packet priority to internal switch
           priority (based on PCP or DSCP)

   - Ethernet PHYs:
      - Broadcom PHYs:
         - support for Wake-on-LAN for BCM54210E/B50212E
         - report LPI counter
      - Microsemi PHYs: support RGMII delay configuration (VSC85xx)
      - Micrel PHYs: receive timestamp in the frame (LAN8841)
      - Realtek PHYs: support optional external PHY clock
      - Altera TSE PCS: merge the driver into Lynx PCS which it is a
        variant of

   - CAN: Kvaser PCIEcan:
      - support packet timestamping

   - WiFi:
      - Intel (iwlwifi):
         - major update for new firmware and Multi-Link Operation (MLO)
         - configuration rework to drop test devices and split the
           different families
         - support for segmented PNVM images and power tables
         - new vendor entries for PPAG (platform antenna gain) feature
      - Qualcomm 802.11ax (ath11k):
         - Multiple Basic Service Set Identifier (MBSSID) and Enhanced
           MBSSID Advertisement (EMA) support in AP mode
         - support factory test mode
      - RealTek (rtw89):
         - add RSSI based antenna diversity
         - support U-NII-4 channels on 5 GHz band
      - RealTek (rtl8xxxu):
         - AP mode support for 8188f
         - support USB RX aggregation for the newer chips"

* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
  net: scm: introduce and use scm_recv_unix helper
  af_unix: Skip SCM_PIDFD if scm->pid is NULL.
  net: lan743x: Simplify comparison
  netlink: Add __sock_i_ino() for __netlink_diag_dump().
  net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
  Revert "af_unix: Call scm_recv() only after scm_set_cred()."
  phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
  libceph: Partially revert changes to support MSG_SPLICE_PAGES
  net: phy: mscc: fix packet loss due to RGMII delays
  net: mana: use vmalloc_array and vcalloc
  net: enetc: use vmalloc_array and vcalloc
  ionic: use vmalloc_array and vcalloc
  pds_core: use vmalloc_array and vcalloc
  gve: use vmalloc_array and vcalloc
  octeon_ep: use vmalloc_array and vcalloc
  net: usb: qmi_wwan: add u-blox 0x1312 composition
  perf trace: fix MSG_SPLICE_PAGES build error
  ipvlan: Fix return value of ipvlan_queue_xmit()
  netfilter: nf_tables: fix underflow in chain reference counter
  netfilter: nf_tables: unbind non-anonymous set if rule construction fails
  ...
2023-06-28 16:43:10 -07:00
David Howells
a1a5e87527 dlm: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage
When transmitting data, call down a layer using a single sendmsg with
MSG_SPLICE_PAGES to indicate that content should be spliced rather using
sendpage.  This allows ->sendpage() to be replaced by something that can
handle multiple multipage folios in a single transaction.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christine Caulfield <ccaulfie@redhat.com>
cc: David Teigland <teigland@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: cluster-devel@redhat.com
Link: https://lore.kernel.org/r/20230623225513.2732256-7-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24 15:50:12 -07:00
Alexander Aring
fc4ea4229c fs: dlm: remove filter local comms on close
The current way how lowcomms is configured is due configfs entries. Each
comms configfs entry will create a lowcomms connection. Even the local
connection itself will be stored as a lowcomms connection, although most
functionality for a local lowcomms connection struct is not necessary.

Now in some scenarios we will see that dlm_controld reports a -EEXIST
when configure a node via configfs:

... /sys/kernel/config/dlm/cluster/comms/1/addr: write failed: 17 -1

Doing a:

cat /sys/kernel/config/dlm/cluster/comms/1/addr_list

reported nothing. This was being seen on cluster with nodeid 1 and it's
local configuration. To be sure the configfs entries are in sync with
lowcomms connection structures we always call dlm_midcomms_close() to be
sure the lowcomms connection gets removed when the configfs entry gets
dropped.

Before commit 07ee38674a ("fs: dlm: filter ourself midcomms calls") it
was just doing this by accident and the filter by doing:

if (nodeid == dlm_our_nodeid())
	return 0;

inside dlm_midcomms_close() was never been hit because drop_comm() sets
local_comm to NULL and cause that dlm_our_nodeid() returns always the
invalid nodeid 0.

Fixes: 07ee38674a ("fs: dlm: filter ourself midcomms calls")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-06-20 09:25:20 -05:00
Alexander Aring
1696c75f18 fs: dlm: add send ack threshold and append acks to msgs
This patch changes the time when we sending an ack back to tell the
other side it can free some message because it is arrived on the
receiver node, due random reconnects e.g. TCP resets this is handled as
well on application layer to not let DLM run into a deadlock state.

The current handling has the following problems:

1. We end in situations that we only send an ack back message of 16
   bytes out and no other messages. Whereas DLM has logic to combine
   so much messages as it can in one send() socket call. This behaviour
   can be discovered by "trace-cmd start -e dlm_recv" and observing the
   ret field being 16 bytes.

2. When processing of DLM messages will never end because we receive a
   lot of messages, we will not send an ack back as it happens when
   the processing loop ends.

This patch introduces a likely and unlikely threshold case. The likely
case will send an ack back on a transmit path if the threshold is
triggered of amount of processed upper layer protocol. This will solve
issue 1 because it will be send when another normal DLM message will be
sent. It solves issue 2 because it is not part of the processing loop.

There is however a unlikely case, the unlikely case has a bigger
threshold and will be triggered when we only receive messages and do not
sent any message back. This case avoids that the sending node will keep
a lot of message for a long time as we send sometimes ack backs to tell
the sender to finally release messages.

The atomic cmpxchg() is there to provide a atomically ack send with
reset of the upper layer protocol delivery counter.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-06-14 10:17:33 -05:00
Alexander Aring
d00725cab2 fs: dlm: handle sequence numbers as atomic
Currently seq_next is only be read on the receive side which processed
in an ordered way. The seq_send is being protected by locks. To being
able to read the seq_next value on send side as well we convert it to an
atomic_t value. The atomic_cmpxchg() is probably not necessary, however
the atomic_inc() depends on a if coniditional and this should be handled
in an atomic context.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-06-14 10:17:33 -05:00
Alexander Aring
75a7d60134 fs: dlm: handle lkb wait count as atomic_t
Currently the lkb_wait_count is locked by the rsb lock and it should be
fine to handle lkb_wait_count as non atomic_t value. However for the
overall process of reducing locking this patch converts it to an
atomic_t value.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-06-14 10:17:33 -05:00
Alexander Aring
07ee38674a fs: dlm: filter ourself midcomms calls
It makes no sense to call midcomms/lowcomms functionality for the local
node as socket functionality is only required for remote nodes. This
patch filters those calls in the upper layer of lockspace membership
handling instead of doing it in midcomms/lowcomms layer as they should
never be aware of local nodeid.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-06-14 10:17:33 -05:00
Alexander Aring
70cf2fecf8 fs: dlm: warn about messages from left nodes
This patch warns about messages which are received from nodes who
already left the lockspace resource signaled by the cluster manager.
Before commit 489d8e559c ("fs: dlm: add reliable connection if
reconnect") there was a synchronization issue with the socket
lifetime and the cluster event of leaving a lockspace and other
nodes did not stop of sending messages because the cluster manager has a
pending message to leave the lockspace. The reliable session layer for
dlm use sequence numbers to ensure dlm message were never being dropped.
If this is not corrected synchronized we have a problem, this patch will
use the filter case and turn it into a WARN_ON_ONCE() so we seeing such
issue on the kernel log because it should never happen now.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-06-14 10:17:33 -05:00
Alexander Aring
5ce9ef30f2 fs: dlm: move dlm_purge_lkb_callbacks to user module
This patch moves the dlm_purge_lkb_callbacks() function from ast to user
dlm module as it is only a function being used by dlm user
implementation. I got be hinted to hold specific locks regarding the
callback handling for dlm_purge_lkb_callbacks() but it was false
positive. It is confusing because ast dlm implementation uses a
different locking behaviour as user locks uses as DLM handles kernel and
user dlm locks differently. To avoid the confusing we move this function
to dlm user implementation.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-06-14 10:17:33 -05:00
Alexander Aring
d41a1a3db4 fs: dlm: cleanup STOP_IO bitflag set when stop io
There should no difference between setting the CF_IO_STOP flag
before restore_callbacks() to do it before or afterwards. The
restore_callbacks() will be sure that no callback is executed anymore
when the bit wasn't set.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-06-14 10:17:33 -05:00
Alexander Aring
f8bce79d9d fs: dlm: don't check othercon twice
This patch removes an another check if con->othercon set inside the
branch which already does that.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-06-14 10:17:33 -05:00
Alexander Aring
cbba21169e fs: dlm: unregister memory at the very last
The dlm modules midcomms, debugfs, lockspace, uses kmem caches. We
ensure that the kmem caches getting deallocated after those modules
exited.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-06-14 10:17:33 -05:00
Alexander Aring
f68bb23cad fs: dlm: fix missing pending to false
This patch sets the process_dlm_messages_pending boolean to false when
there was no message to process. It is a case which should not happen
but if we are prepared to recover from this situation by setting pending
boolean to false.

Cc: stable@vger.kernel.org
Fixes: dbb751ffab ("fs: dlm: parallelize lowcomms socket handling")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-06-14 10:17:33 -05:00
Alexander Aring
7a931477bf fs: dlm: clear pending bit when queue was empty
This patch clears the DLM_IFL_CB_PENDING_BIT flag which will be set when
there is callback work queued when there was no callback to dequeue. It
is a buggy case and should never happen, that's why there is a
WARN_ON(). However if the case happens we are prepared to somehow
recover from it.

Cc: stable@vger.kernel.org
Fixes: 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-06-14 10:17:33 -05:00
Alexander Aring
c6b6d6dcc7 fs: dlm: revert check required context while close
This patch reverts commit 2c3fa6ae4d ("dlm: check required context
while close"). The function dlm_midcomms_close(), which will call later
dlm_lowcomms_close(), is called when the cluster manager tells the node
got fenced which means on midcomms/lowcomms layer to disconnect the node
from the cluster communication. The node can rejoin the cluster later.
This patch was ensuring no new message were able to be triggered when we
are in the close() function context. This was done by checking if the
lockspace has been stopped. However there is a missing check that we
only need to check specific lockspaces where the fenced node is member
of. This is currently complicated because there is no way to easily
check if a node is part of a specific lockspace without stopping the
recovery. For now we just revert this commit as it is just a check to
finding possible leaks of stopping lockspaces before close() is called.

Cc: stable@vger.kernel.org
Fixes: 2c3fa6ae4d ("dlm: check required context while close")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-06-14 10:17:33 -05:00
Alexander Aring
57e2c2f2d9 fs: dlm: fix mismatch of plock results from userspace
When a waiting plock request (F_SETLKW) is sent to userspace
for processing (dlm_controld), the result is returned at a
later time. That result could be incorrectly matched to a
different waiting request in cases where the owner field is
the same (e.g. different threads in a process.) This is fixed
by comparing all the properties in the request and reply.

The results for non-waiting plock requests are now matched
based on list order because the results are returned in the
same order they were sent.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-05-24 14:27:07 -05:00
Alexander Aring
0f2b1cb89c fs: dlm: make F_SETLK use unkillable wait_event
While a non-waiting posix lock request (F_SETLK) is waiting for
user space processing (in dlm_controld), wait for that processing
to complete with an unkillable wait_event(). This makes F_SETLK
behave the same way for F_RDLCK, F_WRLCK and F_UNLCK. F_SETLKW
continues to use wait_event_killable().

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-05-23 12:56:58 -05:00
Alexander Aring
59e45c758c fs: dlm: interrupt posix locks only when process is killed
If a posix lock request is waiting for a result from user space
(dlm_controld), do not let it be interrupted unless the process
is killed. This reverts commit a6b1533e9a ("dlm: make posix locks
interruptible"). The problem with the interruptible change is
that all locks were cleared on any signal interrupt. If a signal
was received that did not terminate the process, the process
could continue running after all its dlm posix locks had been
cleared. A future patch will add cancelation to allow proper
interruption.

Cc: stable@vger.kernel.org
Fixes: a6b1533e9a ("dlm: make posix locks interruptible")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-05-22 14:34:32 -05:00
Azeem Shaikh
30ad0627f1 dlm: Replace all non-returning strlcpy with strscpy
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230510221237.3509484-1-azeemshaikh38@gmail.com
2023-05-22 12:34:09 -07:00
Alexander Aring
c847f4e203 fs: dlm: fix cleanup pending ops when interrupted
Immediately clean up a posix lock request if it is interrupted
while waiting for a result from user space (dlm_controld.)  This
largely reverts the recent commit b92a4e3f86 ("fs: dlm: change
posix lock sigint handling"). That previous commit attempted
to defer lock cleanup to the point in time when a result from
user space arrived. The deferred approach was not reliable
because some dlm plock ops may not receive replies.

Cc: stable@vger.kernel.org
Fixes: b92a4e3f86 ("fs: dlm: change posix lock sigint handling")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-05-22 13:49:55 -05:00
Alexander Aring
92655fbda5 fs: dlm: return positive pid value for F_GETLK
The GETLK pid values have all been negated since commit 9d5b86ac13
("fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks").
Revert this for local pids, and leave in place negative pids for remote
owners.

Cc: stable@vger.kernel.org
Fixes: 9d5b86ac13 ("fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-05-22 13:34:47 -05:00
Azeem Shaikh
35d6df53b9 dlm: Replace all non-returning strlcpy with strscpy
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-05-22 11:53:22 -05:00
Linus Torvalds
6e98b09da9 Networking changes for 6.4.
Core
 ----
 
  - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
    default value allows for better BIG TCP performances.
 
  - Reduce compound page head access for zero-copy data transfers.
 
  - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
 
  - Threaded NAPI improvements, adding defer skb free support and unneeded
    softirq avoidance.
 
  - Address dst_entry reference count scalability issues, via false
    sharing avoidance and optimize refcount tracking.
 
  - Add lockless accesses annotation to sk_err[_soft].
 
  - Optimize again the skb struct layout.
 
  - Extends the skb drop reasons to make it usable by multiple
    subsystems.
 
  - Better const qualifier awareness for socket casts.
 
 BPF
 ---
 
  - Add skb and XDP typed dynptrs which allow BPF programs for more
    ergonomic and less brittle iteration through data and variable-sized
    accesses.
 
  - Add a new BPF netfilter program type and minimal support to hook
    BPF programs to netfilter hooks such as prerouting or forward.
 
  - Add more precise memory usage reporting for all BPF map types.
 
  - Adds support for using {FOU,GUE} encap with an ipip device operating
    in collect_md mode and add a set of BPF kfuncs for controlling encap
    params.
 
  - Allow BPF programs to detect at load time whether a particular kfunc
    exists or not, and also add support for this in light skeleton.
 
  - Bigger batch of BPF verifier improvements to prepare for upcoming BPF
    open-coded iterators allowing for less restrictive looping capabilities.
 
  - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
    programs to NULL-check before passing such pointers into kfunc.
 
  - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
    local storage maps.
 
  - Enable RCU semantics for task BPF kptrs and allow referenced kptr
    tasks to be stored in BPF maps.
 
  - Add support for refcounted local kptrs to the verifier for allowing
    shared ownership, useful for adding a node to both the BPF list and
    rbtree.
 
  - Add BPF verifier support for ST instructions in convert_ctx_access()
    which will help new -mcpu=v4 clang flag to start emitting them.
 
  - Add ARM32 USDT support to libbpf.
 
  - Improve bpftool's visual program dump which produces the control
    flow graph in a DOT format by adding C source inline annotations.
 
 Protocols
 ---------
 
  - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
    indicates the provenance of the IP address.
 
  - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
 
  - Add the handshake upcall mechanism, allowing the user-space
    to implement generic TLS handshake on kernel's behalf.
 
  - Bridge: support per-{Port, VLAN} neighbor suppression, increasing
    resilience to nodes failures.
 
  - SCTP: add support for Fair Capacity and Weighted Fair Queueing
    schedulers.
 
  - MPTCP: delay first subflow allocation up to its first usage. This
    will allow for later better LSM interaction.
 
  - xfrm: Remove inner/outer modes from input/output path. These are
    not needed anymore.
 
  - WiFi:
    - reduced neighbor report (RNR) handling for AP mode
    - HW timestamping support
    - support for randomized auth/deauth TA for PASN privacy
    - per-link debugfs for multi-link
    - TC offload support for mac80211 drivers
    - mac80211 mesh fast-xmit and fast-rx support
    - enable Wi-Fi 7 (EHT) mesh support
 
 Netfilter
 ---------
 
  - Add nf_tables 'brouting' support, to force a packet to be routed
    instead of being bridged.
 
  - Update bridge netfilter and ovs conntrack helpers to handle
    IPv6 Jumbo packets properly, i.e. fetch the packet length
    from hop-by-hop extension header. This is needed for BIT TCP
    support.
 
  - The iptables 32bit compat interface isn't compiled in by default
    anymore.
 
  - Move ip(6)tables builtin icmp matches to the udptcp one.
    This has the advantage that icmp/icmpv6 match doesn't load the
    iptables/ip6tables modules anymore when iptables-nft is used.
 
  - Extended netlink error report for netdevice in flowtables and
    netdev/chains. Allow for incrementally add/delete devices to netdev
    basechain. Allow to create netdev chain without device.
 
 Driver API
 ----------
 
  - Remove redundant Device Control Error Reporting Enable, as PCI core
    has already error reporting enabled at enumeration time.
 
  - Move Multicast DB netlink handlers to core, allowing devices other
    then bridge to use them.
 
  - Allow the page_pool to directly recycle the pages from safely
    localized NAPI.
 
  - Implement lockless TX queue stop/wake combo macros, allowing for
    further code de-duplication and sanitization.
 
  - Add YNL support for user headers and struct attrs.
 
  - Add partial YNL specification for devlink.
 
  - Add partial YNL specification for ethtool.
 
  - Add tc-mqprio and tc-taprio support for preemptible traffic classes.
 
  - Add tx push buf len param to ethtool, specifies the maximum number
    of bytes of a transmitted packet a driver can push directly to the
    underlying device.
 
  - Add basic LED support for switch/phy.
 
  - Add NAPI documentation, stop relaying on external links.
 
  - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
    work to make the hardware timestamping layer selectable by user
    space.
 
  - Add transceiver support and improve the error messages for CAN-FD
    controllers.
 
 New hardware / drivers
 ----------------------
 
  - Ethernet:
    - AMD/Pensando core device support
    - MediaTek MT7981 SoC
    - MediaTek MT7988 SoC
    - Broadcom BCM53134 embedded switch
    - Texas Instruments CPSW9G ethernet switch
    - Qualcomm EMAC3 DWMAC ethernet
    - StarFive JH7110 SoC
    - NXP CBTX ethernet PHY
 
  - WiFi:
    - Apple M1 Pro/Max devices
    - RealTek rtl8710bu/rtl8188gu
    - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
 
  - Bluetooth:
    - Realtek RTL8821CS, RTL8851B, RTL8852BS
    - Mediatek MT7663, MT7922
    - NXP w8997
    - Actions Semi ATS2851
    - QTI WCN6855
    - Marvell 88W8997
 
  - Can:
    - STMicroelectronics bxcan stm32f429
 
 Drivers
 -------
  - Ethernet NICs:
    - Intel (1G, icg):
      - add tracking and reporting of QBV config errors.
      - add support for configuring max SDU for each Tx queue.
    - Intel (100G, ice):
      - refactor mailbox overflow detection to support Scalable IOV
      - GNSS interface optimization
    - Intel (i40e):
      - support XDP multi-buffer
    - nVidia/Mellanox:
      - add the support for linux bridge multicast offload
      - enable TC offload for egress and engress MACVLAN over bond
      - add support for VxLAN GBP encap/decap flows offload
      - extend packet offload to fully support libreswan
      - support tunnel mode in mlx5 IPsec packet offload
      - extend XDP multi-buffer support
      - support MACsec VLAN offload
      - add support for dynamic msix vectors allocation
      - drop RX page_cache and fully use page_pool
      - implement thermal zone to report NIC temperature
    - Netronome/Corigine:
      - add support for multi-zone conntrack offload
    - Solarflare/Xilinx:
      - support offloading TC VLAN push/pop actions to the MAE
      - support TC decap rules
      - support unicast PTP
 
  - Other NICs:
    - Broadcom (bnxt): enforce software based freq adjustments only
 		on shared PHC NIC
    - RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
    - Micrel (lan8841): add support for PTP_PF_PEROUT
    - Cadence (macb): enable PTP unicast
    - Engleder (tsnep): add XDP socket zero-copy support
    - virtio-net: implement exact header length guest feature
    - veth: add page_pool support for page recycling
    - vxlan: add MDB data path support
    - gve: add XDP support for GQI-QPL format
    - geneve: accept every ethertype
    - macvlan: allow some packets to bypass broadcast queue
    - mana: add support for jumbo frame
 
  - Ethernet high-speed switches:
    - Microchip (sparx5): Add support for TC flower templates.
 
  - Ethernet embedded switches:
    - Broadcom (b54):
      - configure 6318 and 63268 RGMII ports
    - Marvell (mv88e6xxx):
      - faster C45 bus scan
    - Microchip:
      - lan966x:
        - add support for IS1 VCAP
        - better TX/RX from/to CPU performances
      - ksz9477: add ETS Qdisc support
      - ksz8: enhance static MAC table operations and error handling
      - sama7g5: add PTP capability
    - NXP (ocelot):
      - add support for external ports
      - add support for preemptible traffic classes
    - Texas Instruments:
      - add CPSWxG SGMII support for J7200 and J721E
 
  - Intel WiFi (iwlwifi):
    - preparation for Wi-Fi 7 EHT and multi-link support
    - EHT (Wi-Fi 7) sniffer support
    - hardware timestamping support for some devices/firwmares
    - TX beacon protection on newer hardware
 
  - Qualcomm 802.11ax WiFi (ath11k):
    - MU-MIMO parameters support
    - ack signal support for management packets
 
  - RealTek WiFi (rtw88):
    - SDIO bus support
    - better support for some SDIO devices
      (e.g. MAC address from efuse)
 
  - RealTek WiFi (rtw89):
    - HW scan support for 8852b
    - better support for 6 GHz scanning
    - support for various newer firmware APIs
    - framework firmware backwards compatibility
 
  - MediaTek WiFi (mt76):
    - P2P support
    - mesh A-MSDU support
    - EHT (Wi-Fi 7) support
    - coredump support
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmRI/mUSHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOkgO0QAJGxpuN67YgYV0BIM+/atWKEEexJYG7B
 9MMpU4jMO3EW/pUS5t7VRsBLUybLYVPmqCZoHodObDfnu59jiPOegb6SikJv/ZwJ
 Zw62PVk5MvDnQjlu4e6kDcGwkplteN08TlgI+a49BUTedpdFitrxHAYGW8f2fRO6
 cK2XSld+ZucMoym5vRwf8yWS1BwdxnslPMxDJ+/8ZbWBZv44qAnG2vMB/kIx7ObC
 Vel/4m6MzTwVsLYBsRvcwMVbNNlZ9GuhztlTzEbfGA4ZhTadIAMgb5VTWXB84Ws7
 Aic5wTdli+q+x6/2cxhbyeoVuB9HHObYmLBAciGg4GNljP5rnQBY3X3+KVZ/x9TI
 HQB7CmhxmAZVrO9pLARFV+ECrMTH2/dy3NyrZ7uYQ3WPOXJi8hJZjOTO/eeEGL7C
 eTjdz0dZBWIBK2gON/6s4nExXVQUTEF2ZsPi52jTTClKjfe5pz/ddeFQIWaY1DTm
 pInEiWPAvd28JyiFmhFNHsuIBCjX/Zqe2JuMfMBeBibDAC09o/OGdKJYUI15AiRf
 F46Pdb7use/puqfrYW44kSAfaPYoBiE+hj1RdeQfen35xD9HVE4vdnLNeuhRlFF9
 aQfyIRHYQofkumRDr5f8JEY66cl9NiKQ4IVW1xxQfYDNdC6wQqREPG1md7rJVMrJ
 vP7ugFnttneg
 =ITVa
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
 "Core:

   - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
     default value allows for better BIG TCP performances

   - Reduce compound page head access for zero-copy data transfers

   - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
     possible

   - Threaded NAPI improvements, adding defer skb free support and
     unneeded softirq avoidance

   - Address dst_entry reference count scalability issues, via false
     sharing avoidance and optimize refcount tracking

   - Add lockless accesses annotation to sk_err[_soft]

   - Optimize again the skb struct layout

   - Extends the skb drop reasons to make it usable by multiple
     subsystems

   - Better const qualifier awareness for socket casts

  BPF:

   - Add skb and XDP typed dynptrs which allow BPF programs for more
     ergonomic and less brittle iteration through data and
     variable-sized accesses

   - Add a new BPF netfilter program type and minimal support to hook
     BPF programs to netfilter hooks such as prerouting or forward

   - Add more precise memory usage reporting for all BPF map types

   - Adds support for using {FOU,GUE} encap with an ipip device
     operating in collect_md mode and add a set of BPF kfuncs for
     controlling encap params

   - Allow BPF programs to detect at load time whether a particular
     kfunc exists or not, and also add support for this in light
     skeleton

   - Bigger batch of BPF verifier improvements to prepare for upcoming
     BPF open-coded iterators allowing for less restrictive looping
     capabilities

   - Rework RCU enforcement in the verifier, add kptr_rcu and enforce
     BPF programs to NULL-check before passing such pointers into kfunc

   - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
     in local storage maps

   - Enable RCU semantics for task BPF kptrs and allow referenced kptr
     tasks to be stored in BPF maps

   - Add support for refcounted local kptrs to the verifier for allowing
     shared ownership, useful for adding a node to both the BPF list and
     rbtree

   - Add BPF verifier support for ST instructions in
     convert_ctx_access() which will help new -mcpu=v4 clang flag to
     start emitting them

   - Add ARM32 USDT support to libbpf

   - Improve bpftool's visual program dump which produces the control
     flow graph in a DOT format by adding C source inline annotations

  Protocols:

   - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
     indicates the provenance of the IP address

   - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition

   - Add the handshake upcall mechanism, allowing the user-space to
     implement generic TLS handshake on kernel's behalf

   - Bridge: support per-{Port, VLAN} neighbor suppression, increasing
     resilience to nodes failures

   - SCTP: add support for Fair Capacity and Weighted Fair Queueing
     schedulers

   - MPTCP: delay first subflow allocation up to its first usage. This
     will allow for later better LSM interaction

   - xfrm: Remove inner/outer modes from input/output path. These are
     not needed anymore

   - WiFi:
      - reduced neighbor report (RNR) handling for AP mode
      - HW timestamping support
      - support for randomized auth/deauth TA for PASN privacy
      - per-link debugfs for multi-link
      - TC offload support for mac80211 drivers
      - mac80211 mesh fast-xmit and fast-rx support
      - enable Wi-Fi 7 (EHT) mesh support

  Netfilter:

   - Add nf_tables 'brouting' support, to force a packet to be routed
     instead of being bridged

   - Update bridge netfilter and ovs conntrack helpers to handle IPv6
     Jumbo packets properly, i.e. fetch the packet length from
     hop-by-hop extension header. This is needed for BIT TCP support

   - The iptables 32bit compat interface isn't compiled in by default
     anymore

   - Move ip(6)tables builtin icmp matches to the udptcp one. This has
     the advantage that icmp/icmpv6 match doesn't load the
     iptables/ip6tables modules anymore when iptables-nft is used

   - Extended netlink error report for netdevice in flowtables and
     netdev/chains. Allow for incrementally add/delete devices to netdev
     basechain. Allow to create netdev chain without device

  Driver API:

   - Remove redundant Device Control Error Reporting Enable, as PCI core
     has already error reporting enabled at enumeration time

   - Move Multicast DB netlink handlers to core, allowing devices other
     then bridge to use them

   - Allow the page_pool to directly recycle the pages from safely
     localized NAPI

   - Implement lockless TX queue stop/wake combo macros, allowing for
     further code de-duplication and sanitization

   - Add YNL support for user headers and struct attrs

   - Add partial YNL specification for devlink

   - Add partial YNL specification for ethtool

   - Add tc-mqprio and tc-taprio support for preemptible traffic classes

   - Add tx push buf len param to ethtool, specifies the maximum number
     of bytes of a transmitted packet a driver can push directly to the
     underlying device

   - Add basic LED support for switch/phy

   - Add NAPI documentation, stop relaying on external links

   - Convert dsa_master_ioctl() to netdev notifier. This is a
     preparatory work to make the hardware timestamping layer selectable
     by user space

   - Add transceiver support and improve the error messages for CAN-FD
     controllers

  New hardware / drivers:

   - Ethernet:
      - AMD/Pensando core device support
      - MediaTek MT7981 SoC
      - MediaTek MT7988 SoC
      - Broadcom BCM53134 embedded switch
      - Texas Instruments CPSW9G ethernet switch
      - Qualcomm EMAC3 DWMAC ethernet
      - StarFive JH7110 SoC
      - NXP CBTX ethernet PHY

   - WiFi:
      - Apple M1 Pro/Max devices
      - RealTek rtl8710bu/rtl8188gu
      - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset

   - Bluetooth:
      - Realtek RTL8821CS, RTL8851B, RTL8852BS
      - Mediatek MT7663, MT7922
      - NXP w8997
      - Actions Semi ATS2851
      - QTI WCN6855
      - Marvell 88W8997

   - Can:
      - STMicroelectronics bxcan stm32f429

  Drivers:

   - Ethernet NICs:
      - Intel (1G, icg):
         - add tracking and reporting of QBV config errors
         - add support for configuring max SDU for each Tx queue
      - Intel (100G, ice):
         - refactor mailbox overflow detection to support Scalable IOV
         - GNSS interface optimization
      - Intel (i40e):
         - support XDP multi-buffer
      - nVidia/Mellanox:
         - add the support for linux bridge multicast offload
         - enable TC offload for egress and engress MACVLAN over bond
         - add support for VxLAN GBP encap/decap flows offload
         - extend packet offload to fully support libreswan
         - support tunnel mode in mlx5 IPsec packet offload
         - extend XDP multi-buffer support
         - support MACsec VLAN offload
         - add support for dynamic msix vectors allocation
         - drop RX page_cache and fully use page_pool
         - implement thermal zone to report NIC temperature
      - Netronome/Corigine:
         - add support for multi-zone conntrack offload
      - Solarflare/Xilinx:
         - support offloading TC VLAN push/pop actions to the MAE
         - support TC decap rules
         - support unicast PTP

   - Other NICs:
      - Broadcom (bnxt): enforce software based freq adjustments only on
        shared PHC NIC
      - RealTek (r8169): refactor to addess ASPM issues during NAPI poll
      - Micrel (lan8841): add support for PTP_PF_PEROUT
      - Cadence (macb): enable PTP unicast
      - Engleder (tsnep): add XDP socket zero-copy support
      - virtio-net: implement exact header length guest feature
      - veth: add page_pool support for page recycling
      - vxlan: add MDB data path support
      - gve: add XDP support for GQI-QPL format
      - geneve: accept every ethertype
      - macvlan: allow some packets to bypass broadcast queue
      - mana: add support for jumbo frame

   - Ethernet high-speed switches:
      - Microchip (sparx5): Add support for TC flower templates

   - Ethernet embedded switches:
      - Broadcom (b54):
         - configure 6318 and 63268 RGMII ports
      - Marvell (mv88e6xxx):
         - faster C45 bus scan
      - Microchip:
         - lan966x:
            - add support for IS1 VCAP
            - better TX/RX from/to CPU performances
         - ksz9477: add ETS Qdisc support
         - ksz8: enhance static MAC table operations and error handling
         - sama7g5: add PTP capability
      - NXP (ocelot):
         - add support for external ports
         - add support for preemptible traffic classes
      - Texas Instruments:
         - add CPSWxG SGMII support for J7200 and J721E

   - Intel WiFi (iwlwifi):
      - preparation for Wi-Fi 7 EHT and multi-link support
      - EHT (Wi-Fi 7) sniffer support
      - hardware timestamping support for some devices/firwmares
      - TX beacon protection on newer hardware

   - Qualcomm 802.11ax WiFi (ath11k):
      - MU-MIMO parameters support
      - ack signal support for management packets

   - RealTek WiFi (rtw88):
      - SDIO bus support
      - better support for some SDIO devices (e.g. MAC address from
        efuse)

   - RealTek WiFi (rtw89):
      - HW scan support for 8852b
      - better support for 6 GHz scanning
      - support for various newer firmware APIs
      - framework firmware backwards compatibility

   - MediaTek WiFi (mt76):
      - P2P support
      - mesh A-MSDU support
      - EHT (Wi-Fi 7) support
      - coredump support"

* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
  net: phy: hide the PHYLIB_LEDS knob
  net: phy: marvell-88x2222: remove unnecessary (void*) conversions
  tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
  net: amd: Fix link leak when verifying config failed
  net: phy: marvell: Fix inconsistent indenting in led_blink_set
  lan966x: Don't use xdp_frame when action is XDP_TX
  tsnep: Add XDP socket zero-copy TX support
  tsnep: Add XDP socket zero-copy RX support
  tsnep: Move skb receive action to separate function
  tsnep: Add functions for queue enable/disable
  tsnep: Rework TX/RX queue initialization
  tsnep: Replace modulo operation with mask
  net: phy: dp83867: Add led_brightness_set support
  net: phy: Fix reading LED reg property
  drivers: nfc: nfcsim: remove return value check of `dev_dir`
  net: phy: dp83867: Remove unnecessary (void*) conversions
  net: ethtool: coalesce: try to make user settings stick twice
  net: mana: Check if netdev/napi_alloc_frag returns single page
  net: mana: Rename mana_refill_rxoob and remove some empty lines
  net: veth: add page_pool stats
  ...
2023-04-26 16:07:23 -07:00
Alexander Aring
7a40f1f18a fs: dlm: stop unnecessarily filling zero ms_extra bytes
Commit 7175e131eb ("fs: dlm: fix invalid derefence of sb_lvbptr")
fixes an issue when the lkb->lkb_lvbptr set to an dangled pointer and an
followed memcpy() would fail. It was fixed by an additional check of
DLM_LKF_VALBLK flag. The mentioned commit forgot to add an additional check
if DLM_LKF_VALBLK is set for the additional amount of LVB data allocated
in a dlm message. This patch is changing the message allocation to check
additionally if DLM_LKF_VALBLK is set otherwise a dangled lkb->lkb_lvbptr
pointer would allocated zero LVB message data which not gets filled with
actual data.

This patch is however only a cleanup to reduce the amount of zero bytes
transmitted over network as receive_lvb() will only evaluates message LVB
data if DLM_LKF_VALBLK is set.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-04-21 11:46:47 -05:00
Eric Dumazet
2f2d9972af net: annotate lockless accesses to sk->sk_err_soft
This field can be read/written without lock synchronization.

tcp and dccp have been handled in different patches.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-17 08:25:05 +00:00
Alexander Aring
1361737f10 fs: dlm: switch lkb_sbflags to atomic ops
This patch moves lkb_sbflags handling to atomic bits ops. This should
prepare for a possible manipulating of lkb_sbflags flags at the same
time by concurrent execution.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-03-06 15:49:07 -06:00
Alexander Aring
46d6e722d8 fs: dlm: rsb hash table flag value to atomic ops
This patch moves the rsb hash table handling to atomic flag operations.
The flag operations for DLM_RTF_SHRINK are protected by
ls->ls_rsbtbl[b].lock. However we switch to atomic ops if new possible
flags will be used in a different way and don't assume such lock
dependencies.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-03-06 15:49:07 -06:00
Alexander Aring
e1af8728f6 fs: dlm: move internal flags to atomic ops
This patch will move the lkb_flags value to the recently introduced
lkb_iflags value. For lkb_iflags we use atomic bit operations because
some flags like DLM_IFL_CB_PENDING are used while non rsb lock is held
to avoid issues with other flag manipulations which might run at the
same time we switch to atomic bit operations. Snapshot the bit values to
an uint32_t value is only used for debugging/logging use cases and don't
need to be 100% correct.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-03-06 15:49:07 -06:00
Alexander Aring
8a39dcd9c3 fs: dlm: change dflags to use atomic bits
Currently manipulating lkb_dflags assumes to held the rsb lock assigned
to the lkb. This is held by dlm message processing after certain
time to lookup the right rsb from the received lkb message id. For user
space locks flags, which is currently the only use case for lkb_dflags,
flags are also being set during dlm character device handling without
holding the rsb lock. To minimize the risk that bit operations are
getting corrupted we switch to atomic bit operations. This patch will
also introduce helpers to snapshot atomic bit values in an non atomic
way. There might be still issues with the flag handling e.g. running in
case of manipulating bit ops and snapshot them at the same time, but this
patch minimize them and will start to use atomic bit operations.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-03-06 15:49:07 -06:00
Alexander Aring
8c11ba64ce fs: dlm: store lkb distributed flags into own value
This patch stores lkb distributed flags value in an separate value
instead of sharing internal and distributed flags in lkb->lkb_flags value.
This has the advantage to not mask/write back flag values in
receive_flags() functionality. The dlm debug_fs does not provide the
distributed flags anymore, those can be added in future.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-03-06 15:49:07 -06:00
Alexander Aring
9f48eead5e fs: dlm: remove DLM_IFL_LOCAL_MS flag
The DLM_IFL_LOCAL_MS flag is an internal non shared flag but used in
m_flags of dlm messages. It is not shared because it is only used for
local messaging. Instead using DLM_IFL_LOCAL_MS in dlm messages we pass a
parameter around to signal local messaging or not. This patch is adding
the local parameter to signal local messaging.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-03-06 15:49:07 -06:00
Alexander Aring
a7e7ffacad fs: dlm: rename stub to local message flag
This patch renames DLM_IFL_STUB_MS to DLM_IFL_LOCAL_MS flag. The
DLM_IFL_STUB_MS flag is somewhat misnamed, it means the dlm message is
used for local message transfer only. It is used by recovery to resolve
lock states if a node got fenced.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-03-06 15:49:07 -06:00
Alexander Aring
01c7a59789 fs: dlm: remove deprecated code parts
This patch removes code parts which was declared deprecated by
commit 6b0afc0cc3 ("fs: dlm: don't use deprecated timeout features by
default"). This contains the following dlm functionality:

- start a cancel of a dlm request did not complete after certain timeout:
  The current way how dlm cancellation works and interfering with other
  dlm requests triggered by the user can end in an overlapping and
  returning in -EBUSY. The most user don't handle this case and are
  unaware that DLM can return such errno in such situation. Due the
  timeout the user are mostly unaware when this happens.
- start a netlink warning messages for user space if dlm requests did
  not complete after certain timeout:
  This feature was never being built in the only known dlm user space side.
  As we are to remove the timeout cancellation feature we can directly
  remove this feature as well.

There might be the possibility to bring the timeout cancellation feature
back. However the current way of handling the -EBUSY case which is only
a software limitation and not a hardware limitation should be changed.
We minimize the current code base in DLM cancellation feature to not have
to deal with those existing features while solving the DLM cancellation
feature in general.

UAPI define DLM_LSFL_TIMEWARN is commented as deprecated and reserved
value. We should avoid at first to give it a new meaning but let
possible users still compile by keeping this define. In far future we
can give this flag a new meaning. The same for the DLM_LKF_TIMEOUT lock
request flag.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-03-06 15:49:07 -06:00
Edwin Török
7386457af3 DLM: increase socket backlog to avoid hangs with 16 nodes
On a 16 node virtual cluster with e1000 NICs joining the 12th node prints
SYN flood warnings for the DLM port:
Dec 21 01:46:41 localhost kernel: [ 2146.516664] TCP: request_sock_TCP: Possible SYN flooding on port 21064. Sending cookies.  Check SNMP counters.

And then joining a DLM lockspace hangs:
```
Dec 21 01:49:00 localhost kernel: [ 2285.780913] INFO: task xapi-clusterd:17638 blocked for more than 120 seconds.
Dec 21 01:49:00 localhost kernel: [ 2285.786476]       Not tainted 4.4.0+10 #1
Dec 21 01:49:00 localhost kernel: [ 2285.789043] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Dec 21 01:49:00 localhost kernel: [ 2285.794611] xapi-clusterd   D ffff88001930bc58     0 17638      1 0x00000000
Dec 21 01:49:00 localhost kernel: [ 2285.794615]  ffff88001930bc58 ffff880025593800 ffff880022433800 ffff88001930c000
Dec 21 01:49:00 localhost kernel: [ 2285.794617]  ffff88000ef4a660 ffff88000ef4a658 ffff880022433800 ffff88000ef4a000
Dec 21 01:49:00 localhost kernel: [ 2285.794619]  ffff88001930bc70 ffffffff8159f6b4 7fffffffffffffff ffff88001930bd10
Dec 21 01:49:00 localhost kernel: [ 2285.794644]  [<ffffffff811570fe>] ? printk+0x4d/0x4f
Dec 21 01:49:00 localhost kernel: [ 2285.794647]  [<ffffffff810b1741>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20
Dec 21 01:49:00 localhost kernel: [ 2285.794649]  [<ffffffff815a085d>] wait_for_completion+0x9d/0x110
Dec 21 01:49:00 localhost kernel: [ 2285.794653]  [<ffffffff810979e0>] ? wake_up_q+0x80/0x80
Dec 21 01:49:00 localhost kernel: [ 2285.794661]  [<ffffffffa03fa4b8>] dlm_new_lockspace+0x908/0xac0 [dlm]
Dec 21 01:49:00 localhost kernel: [ 2285.794665]  [<ffffffff810aaa60>] ? prepare_to_wait_event+0x100/0x100
Dec 21 01:49:00 localhost kernel: [ 2285.794670]  [<ffffffffa0402e37>] device_write+0x497/0x6b0 [dlm]
Dec 21 01:49:00 localhost kernel: [ 2285.794673]  [<ffffffff811834f0>] ? handle_mm_fault+0x7f0/0x13b0
Dec 21 01:49:00 localhost kernel: [ 2285.794677]  [<ffffffff811b4438>] __vfs_write+0x28/0xd0
Dec 21 01:49:00 localhost kernel: [ 2285.794679]  [<ffffffff811b4b7f>] ? rw_verify_area+0x6f/0xd0
Dec 21 01:49:00 localhost kernel: [ 2285.794681]  [<ffffffff811b4dc1>] vfs_write+0xb1/0x190
Dec 21 01:49:00 localhost kernel: [ 2285.794686]  [<ffffffff8105ffc2>] ? __do_page_fault+0x302/0x420
Dec 21 01:49:00 localhost kernel: [ 2285.794688]  [<ffffffff811b5986>] SyS_write+0x46/0xa0
Dec 21 01:49:00 localhost kernel: [ 2285.794690]  [<ffffffff815a31ae>] entry_SYSCALL_64_fastpath+0x12/0x71
```

The previous limit of 5 seems like an arbitrary number, that doesn't match any
known DLM cluster size upper bound limit.

Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Cc: Christine Caulfield <ccaulfie@redhat.com>
Cc: David Teigland <teigland@redhat.com>
Cc: cluster-devel@redhat.com
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-03-06 15:49:07 -06:00
Alexander Aring
00f30c051b fs: dlm: add unbound flag to dlm_io workqueue
This patch will add the WQ_UNBOUND flag to the lowcomms dlm_io workqueue
which handles socket io handling to send and receive dlm messages.
The amount of sockets will be 2 for a 3 node cluster. Each socket has
two different workers for doing send and receive work by calling socket
API functionality. Each worker will do their task in order to send dlm
messages in a ordered stream based socket communication. On receive
side the receive buffer will be queued up for an ordered dlm_process
workqueue to parse received dlm messages. The parsing need to be done
currently in an ordered synchronized way because the dlm message processing
is not being made to parse parallel.

After explaining all those workqueue behaviours in lowcomms, the dlm_io
workqueue is only being used for socket handling. Each socket handling
has 2 workers (send and receive). In a 3 cluster node we will end up
with 4 workers. Without the WQ_UNBOUND flag the workers are tight to a
CPU and can never switch, this could be an advantage because local CPU
execution. However with dlm_locktorture testcase I expierenced not all
workers are always in use and my assumption is that some workers are
bound to the same CPU. We should always send or receive when we are
ready to do so, one reason why we disable nigel algorithm on sockets.
We should be safe to do the socket io handling on any CPU which can be
switched during runtime. There is no assumption that the worker stays on
the same CPU. There is no need to respect any workqueue concurrency
model that each worker can only run on one CPU. Lowcomms queue_work()
mechanism has an higher level flag to be sure that it can't schedule
work if the previous worker did not signal it to keep ordered socket
handling. Therefore this patch sets the WQ_UNBOUND flag to allow workers
being executed by any available CPU.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-03-06 15:49:07 -06:00
Alexander Aring
a034c1370d fs: dlm: fix DLM_IFL_CB_PENDING gets overwritten
This patch introduce a new internal flag per lkb value to handle
internal flags which are handled not on wire. The current lkb internal
flags stored as lkb->lkb_flags are split in upper and lower bits, the
lower bits are used to share internal flags over wire for other cluster
wide lkb copies on other nodes.

In commit 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks")
we introduced a new internal flag for pending callbacks for the dlm
callback queue. This flag is protected by the lkb->lkb_cb_lock lock.
This patch overlooked that on dlm receive path and the mentioned upper
and lower bits, that dlm will read the flags, mask it and write it
back. As example receive_flags() in fs/dlm/lock.c. This flag
manipulation is not done atomically and is not protected by
lkb->lkb_cb_lock. This has unknown side effects of the current callback
handling.

In future we should move to set/clear/test bit functionality and avoid
read, mask and writing back flag values. In later patches we will move
the upper parts to the new introduced internal lkb flags which are not
shared between other cluster nodes to the new non shared internal flag
field to avoid similar issues.

Cc: stable@vger.kernel.org
Fixes: 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks")
Reported-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-03-06 15:49:07 -06:00
Linus Torvalds
a93e884edf Driver core changes for 6.3-rc1
Here is the large set of driver core changes for 6.3-rc1.
 
 There's a lot of changes this development cycle, most of the work falls
 into two different categories:
   - fw_devlink fixes and updates.  This has gone through numerous review
     cycles and lots of review and testing by lots of different devices.
     Hopefully all should be good now, and Saravana will be keeping a
     watch for any potential regression on odd embedded systems.
   - driver core changes to work to make struct bus_type able to be moved
     into read-only memory (i.e. const)  The recent work with Rust has
     pointed out a number of areas in the driver core where we are
     passing around and working with structures that really do not have
     to be dynamic at all, and they should be able to be read-only making
     things safer overall.  This is the contuation of that work (started
     last release with kobject changes) in moving struct bus_type to be
     constant.  We didn't quite make it for this release, but the
     remaining patches will be finished up for the release after this
     one, but the groundwork has been laid for this effort.
 
 Other than that we have in here:
   - debugfs memory leak fixes in some subsystems
   - error path cleanups and fixes for some never-able-to-be-hit
     codepaths.
   - cacheinfo rework and fixes
   - Other tiny fixes, full details are in the shortlog
 
 All of these have been in linux-next for a while with no reported
 problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
 6oeFOjD3JDju3cQsfGgd
 =Su6W
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the large set of driver core changes for 6.3-rc1.

  There's a lot of changes this development cycle, most of the work
  falls into two different categories:

   - fw_devlink fixes and updates. This has gone through numerous review
     cycles and lots of review and testing by lots of different devices.
     Hopefully all should be good now, and Saravana will be keeping a
     watch for any potential regression on odd embedded systems.

   - driver core changes to work to make struct bus_type able to be
     moved into read-only memory (i.e. const) The recent work with Rust
     has pointed out a number of areas in the driver core where we are
     passing around and working with structures that really do not have
     to be dynamic at all, and they should be able to be read-only
     making things safer overall. This is the contuation of that work
     (started last release with kobject changes) in moving struct
     bus_type to be constant. We didn't quite make it for this release,
     but the remaining patches will be finished up for the release after
     this one, but the groundwork has been laid for this effort.

  Other than that we have in here:

   - debugfs memory leak fixes in some subsystems

   - error path cleanups and fixes for some never-able-to-be-hit
     codepaths.

   - cacheinfo rework and fixes

   - Other tiny fixes, full details are in the shortlog

  All of these have been in linux-next for a while with no reported
  problems"

[ Geert Uytterhoeven points out that that last sentence isn't true, and
  that there's a pending report that has a fix that is queued up - Linus ]

* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
  debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
  OPP: fix error checking in opp_migrate_dentry()
  debugfs: update comment of debugfs_rename()
  i3c: fix device.h kernel-doc warnings
  dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
  driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
  Revert "driver core: add error handling for devtmpfs_create_node()"
  Revert "devtmpfs: add debug info to handle()"
  Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
  driver core: cpu: don't hand-override the uevent bus_type callback.
  devtmpfs: remove return value of devtmpfs_delete_node()
  devtmpfs: add debug info to handle()
  driver core: add error handling for devtmpfs_create_node()
  driver core: bus: update my copyright notice
  driver core: bus: add bus_get_dev_root() function
  driver core: bus: constify bus_unregister()
  driver core: bus: constify some internal functions
  driver core: bus: constify bus_get_kset()
  driver core: bus: constify bus_register/unregister_notifier()
  driver core: remove private pointer from struct bus_type
  ...
2023-02-24 12:58:55 -08:00
Linus Torvalds
5b7c4cabbb Networking changes for 6.3.
Core
 ----
 
  - Add dedicated kmem_cache for typical/small skb->head, avoid having
    to access struct page at kfree time, and improve memory use.
 
  - Introduce sysctl to set default RPS configuration for new netdevs.
 
  - Define Netlink protocol specification format which can be used
    to describe messages used by each family and auto-generate parsers.
    Add tools for generating kernel data structures and uAPI headers.
 
  - Expose all net/core sysctls inside netns.
 
  - Remove 4s sleep in netpoll if carrier is instantly detected on boot.
 
  - Add configurable limit of MDB entries per port, and port-vlan.
 
  - Continue populating drop reasons throughout the stack.
 
  - Retire a handful of legacy Qdiscs and classifiers.
 
 Protocols
 ---------
 
  - Support IPv4 big TCP (TSO frames larger than 64kB).
 
  - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
    on socket by socket basis.
 
  - Track and report in procfs number of MPTCP sockets used.
 
  - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
    path manager.
 
  - IPv6: don't check net.ipv6.route.max_size and rely on garbage
    collection to free memory (similarly to IPv4).
 
  - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
 
  - ICMP: add per-rate limit counters.
 
  - Add support for user scanning requests in ieee802154.
 
  - Remove static WEP support.
 
  - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
    reporting.
 
  - WiFi 7 EHT channel puncturing support (client & AP).
 
 BPF
 ---
 
  - Add a rbtree data structure following the "next-gen data structure"
    precedent set by recently added linked list, that is, by using
    kfunc + kptr instead of adding a new BPF map type.
 
  - Expose XDP hints via kfuncs with initial support for RX hash and
    timestamp metadata.
 
  - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
    to better support decap on GRE tunnel devices not operating
    in collect metadata.
 
  - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
 
  - Remove the need for trace_printk_lock for bpf_trace_printk
    and bpf_trace_vprintk helpers.
 
  - Extend libbpf's bpf_tracing.h support for tracing arguments of
    kprobes/uprobes and syscall as a special case.
 
  - Significantly reduce the search time for module symbols
    by livepatch and BPF.
 
  - Enable cpumasks to be used as kptrs, which is useful for tracing
    programs tracking which tasks end up running on which CPUs in
    different time intervals.
 
  - Add support for BPF trampoline on s390x and riscv64.
 
  - Add capability to export the XDP features supported by the NIC.
 
  - Add __bpf_kfunc tag for marking kernel functions as kfuncs.
 
  - Add cgroup.memory=nobpf kernel parameter option to disable BPF
    memory accounting for container environments.
 
 Netfilter
 ---------
 
  - Remove the CLUSTERIP target. It has been marked as obsolete
    for years, and we still have WARN splats wrt. races of
    the out-of-band /proc interface installed by this target.
 
  - Add 'destroy' commands to nf_tables. They are identical to
    the existing 'delete' commands, but do not return an error if
    the referenced object (set, chain, rule...) did not exist.
 
 Driver API
 ----------
 
  - Improve cpumask_local_spread() locality to help NICs set the right
    IRQ affinity on AMD platforms.
 
  - Separate C22 and C45 MDIO bus transactions more clearly.
 
  - Introduce new DCB table to control DSCP rewrite on egress.
 
  - Support configuration of Physical Layer Collision Avoidance (PLCA)
    Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
    shared medium Ethernet.
 
  - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
    preemption of low priority frames by high priority frames.
 
  - Add support for controlling MACSec offload using netlink SET.
 
  - Rework devlink instance refcounts to allow registration and
    de-registration under the instance lock. Split the code into multiple
    files, drop some of the unnecessarily granular locks and factor out
    common parts of netlink operation handling.
 
  - Add TX frame aggregation parameters (for USB drivers).
 
  - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
    messages with notifications for debug.
 
  - Allow offloading of UDP NEW connections via act_ct.
 
  - Add support for per action HW stats in TC.
 
  - Support hardware miss to TC action (continue processing in SW from
    a specific point in the action chain).
 
  - Warn if old Wireless Extension user space interface is used with
    modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
    for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
    interface instead.
 
  - Improve the CAN bit timing configuration. Use extack to return error
    messages directly to user space, update the SJW handling, including
    the definition of a new default value that will benefit CAN-FD
    controllers, by increasing their oscillator tolerance.
 
 New hardware / drivers
 ----------------------
 
  - Ethernet:
    - nVidia BlueField-3 support (control traffic driver)
    - Ethernet support for imx93 SoCs
    - Motorcomm yt8531 gigabit Ethernet PHY
    - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
    - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
    - Amlogic gxl MDIO mux
 
  - WiFi:
    - RealTek RTL8188EU (rtl8xxxu)
    - Qualcomm Wi-Fi 7 devices (ath12k)
 
  - CAN:
    - Renesas R-Car V4H
 
 Drivers
 -------
 
  - Bluetooth:
    - Set Per Platform Antenna Gain (PPAG) for Intel controllers.
 
  - Ethernet NICs:
    - Intel (1G, igc):
      - support TSN / Qbv / packet scheduling features of i226 model
    - Intel (100G, ice):
      - use GNSS subsystem instead of TTY
      - multi-buffer XDP support
      - extend support for GPIO pins to E823 devices
    - nVidia/Mellanox:
      - update the shared buffer configuration on PFC commands
      - implement PTP adjphase function for HW offset control
      - TC support for Geneve and GRE with VF tunnel offload
      - more efficient crypto key management method
      - multi-port eswitch support
    - Netronome/Corigine:
      - add DCB IEEE support
      - support IPsec offloading for NFP3800
    - Freescale/NXP (enetc):
      - enetc: support XDP_REDIRECT for XDP non-linear buffers
      - enetc: improve reconfig, avoid link flap and waiting for idle
      - enetc: support MAC Merge layer
    - Other NICs:
      - sfc/ef100: add basic devlink support for ef100
      - ionic: rx_push mode operation (writing descriptors via MMIO)
      - bnxt: use the auxiliary bus abstraction for RDMA
      - r8169: disable ASPM and reset bus in case of tx timeout
      - cpsw: support QSGMII mode for J721e CPSW9G
      - cpts: support pulse-per-second output
      - ngbe: add an mdio bus driver
      - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
      - r8152: handle devices with FW with NCM support
      - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
      - virtio-net: support multi buffer XDP
      - virtio/vsock: replace virtio_vsock_pkt with sk_buff
      - tsnep: XDP support
 
  - Ethernet high-speed switches:
    - nVidia/Mellanox (mlxsw):
      - add support for latency TLV (in FW control messages)
    - Microchip (sparx5):
      - separate explicit and implicit traffic forwarding rules, make
        the implicit rules always active
      - add support for egress DSCP rewrite
      - IS0 VCAP support (Ingress Classification)
      - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
      - ES2 VCAP support (Egress Access Control)
      - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
 
  - Ethernet embedded switches:
    - Marvell (mv88e6xxx):
      - add MAB (port auth) offload support
      - enable PTP receive for mv88e6390
    - NXP (ocelot):
      - support MAC Merge layer
      - support for the the vsc7512 internal copper phys
    - Microchip:
      - lan9303: convert to PHYLINK
      - lan966x: support TC flower filter statistics
      - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
      - lan937x: support Credit Based Shaper configuration
      - ksz9477: support Energy Efficient Ethernet
    - other:
      - qca8k: convert to regmap read/write API, use bulk operations
      - rswitch: Improve TX timestamp accuracy
 
  - Intel WiFi (iwlwifi):
    - EHT (Wi-Fi 7) rate reporting
    - STEP equalizer support: transfer some STEP (connection to radio
      on platforms with integrated wifi) related parameters from the
      BIOS to the firmware.
 
  - Qualcomm 802.11ax WiFi (ath11k):
    - IPQ5018 support
    - Fine Timing Measurement (FTM) responder role support
    - channel 177 support
 
  - MediaTek WiFi (mt76):
    - per-PHY LED support
    - mt7996: EHT (Wi-Fi 7) support
    - Wireless Ethernet Dispatch (WED) reset support
    - switch to using page pool allocator
 
  - RealTek WiFi (rtw89):
    - support new version of Bluetooth co-existance
 
  - Mobile:
    - rmnet: support TX aggregation.
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmP1VIYACgkQMUZtbf5S
 IrvsChAApz0rNL/sPKxXTEfxZ1tN7D3sYxYKQPomxvl5BV+MvicrLddJy3KmzEFK
 nnJNO3nuRNuH422JQ/ylZ4mGX1opa6+5QJb0UINImXUI7Fm8HHBIuPGkv7d5CheZ
 7JexFqjPJXUy9nPyh1Rra+IA9AcRd2U7jeGEZR38wb99bHJQj5Bzdk20WArEB0el
 n44aqg49LXH71bSeXRz77x5SjkwVtYiccQxLcnmTbjLU2xVraLvI2J+wAhHnVXWW
 9lrU1+V4Ex2Xcd1xR0L0cHeK+meP1TrPRAeF+JDpVI3a/zJiE7cZjfHdG/jH5xWl
 leZJqghVozrZQNtewWWO7XhUFhMDgFu3W/1vNLjSHPZEqaz1JpM67J1+ql6s63l4
 LMWoXbcYZz+SL9ZRCoPkbGue/5fKSHv8/Jl9Sh58+eTS+c/zgN8uFGRNFXLX1+EP
 n8uvt985PxMd6x1+dHumhOUzxnY4Sfi1vjitSunTsNFQ3Cmp4SO0IfBVJWfLUCuC
 xz5hbJGJJbSpvUsO+HWyCg83E5OWghRE/Onpt2jsQSZCrO9HDg4FRTEf3WAMgaqc
 edb5KfbRZPTJQM08gWdluXzSk1nw3FNP2tXW4XlgUrEbjb+fOk0V9dQg2gyYTxQ1
 Nhvn8ZQPi6/GMMELHAIPGmmW1allyOGiAzGlQsv8EmL+OFM6WDI=
 =xXhC
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...
2023-02-21 18:24:12 -08:00
Linus Torvalds
eca3a04f14 dlm for 6.3
This patch set fixes some races in the lowcomms startup and shutdown code
 that were found by targetted stress testing that quickly and repeatedly
 joins and leaves lockspaces.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJj870xAAoJEDgbc8f8gGmqGasP/2fy7GIe/NNaTDVfRPzJMVsh
 v5GP42q7pwuaR2rTZxHOpALfDJXx3wu9zsA3A6luSaYRRHxdntztaVT2vaAFa13o
 KI2IDB2DIdJ1PqDVgq8E9I6+X/y5gFpeq9Wyo2FdYATncQ370wN42uIk3EECPTZh
 73HZHBkACQJ28ljt4zWg9ANn1rSiZQjaKayFwbnaH0AjbWrTehccyKR0BE2rNd6c
 EqoRX0tRJLH1RVaOHKW+m4EZaMDo2m5hQH/lhcwth/uqxOqQYOSyMPneKVj/TsI8
 8ToXRCqOYwV3uNZVhgRxu3hHPd2e0l3OgU+mlvNqURTSANr8/D3kEZp90AWDV2yg
 yGtaSYspKY7tjgdIWZbTffxXu+5CZs0xTSkw53xjWyCZ4++c/MO4WO3w8/QIsmWd
 Ow8l29YQc5t7XI0zjpsgyQMaKHQLXE06y9F1jZlZpxa0PfvDOevhl+8YQrKGIJYh
 B+QzjtkmQLpD9RyBRdmxIrS5dl/Wv+wa4zhstD9jkUAkKvZ5ndYvCVtjRu5F8PZ7
 HJzUorZFqDgKfXqTLt91irtS4OdMY4xPWr/V1K8NekTQ/+GY7Q1Qu1MlBOW2aqIk
 UHfn1VaxdFom+tdFF83WG+kmnUu2+YZK83vtnFoZlTsbvfY//zveR1Hbt4MnTj6G
 Z00nx5eb2SaKJFHD0J8z
 =4Def
 -----END PGP SIGNATURE-----

Merge tag 'dlm-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm

Pull dlm updates from David Teigland:
 "This fixes some races in the lowcomms startup and shutdown code that
  were found by targeted stress testing that quickly and repeatedly
  joins and leaves lockspaces"

* tag 'dlm-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  fs: dlm: remove unnecessary waker_up() calls
  fs: dlm: move state change into else branch
  fs: dlm: remove newline in log_print
  fs: dlm: reduce the shutdown timeout to 5 secs
  fs: dlm: make dlm sequence id more robust
  fs: dlm: wait until all midcomms nodes detect version
  fs: dlm: ignore unexpected non dlm opts msgs
  fs: dlm: bring back previous shutdown handling
  fs: dlm: send FIN ack back in right cases
  fs: dlm: move sending fin message into state change handling
  fs: dlm: don't set stop rx flag after node reset
  fs: dlm: fix race setting stop tx flag
  fs: dlm: be sure to call dlm_send_queue_flush()
  fs: dlm: fix use after free in midcomms commit
  fs: dlm: start midcomms before scand
  fs/dlm: Remove "select SRCU"
  fs: dlm: fix return value check in dlm_memory_init()
2023-02-20 13:05:24 -08:00
Greg Kroah-Hartman
56d5f362ad kobject: kset_uevent_ops: make uevent() callback take a const *
The uevent() callback in struct kset_uevent_ops does not modify the
kobject passed into it, so make the pointer const to enforce this
restriction.  When doing so, fix up all existing uevent() callbacks to
have the correct signature to preserve the build.

Cc: Christine Caulfield <ccaulfie@redhat.com>
Cc: David Teigland <teigland@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-17-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-27 13:45:53 +01:00
Alexander Aring
723b197bbd fs: dlm: remove unnecessary waker_up() calls
The wake_up() is already handled inside of midcomms_node_reset() when
switching the state to CLOSED state. So there is not need to call it
after midcomms_node_reset() again.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-01-23 16:27:28 -06:00
Alexander Aring
ef7ef015eb fs: dlm: move state change into else branch
Currently we can switch at first into DLM_CLOSE_WAIT state and then do
another state change if a condition is true. Instead of doing two state
changes we handle the other state change inside an else branch of this
condition.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-01-23 16:27:27 -06:00
Alexander Aring
3186409711 fs: dlm: remove newline in log_print
There is an API difference between log_print() and other printk()s to
put a newline or not. This one was introduced by mistake because
log_print() adds a newline.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-01-23 16:27:26 -06:00
Alexander Aring
11605353f2 fs: dlm: reduce the shutdown timeout to 5 secs
When a shutdown is stuck, time out after 5 seconds instead of
3 minutes.  After this timeout we try a forced shutdown.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-01-23 16:27:20 -06:00
Alexander Aring
317dd6ba6c fs: dlm: make dlm sequence id more robust
When joining a new lockspace, use a random number to initialize
a sequence number used in messages. This makes it easier to detect
sequence number mismatches in message replies during tests that
repeatedly join and leave a lockspace.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-01-23 16:13:20 -06:00
Alexander Aring
b8b750e0c9 fs: dlm: wait until all midcomms nodes detect version
The current dlm version detection is very complex due to backwards
compatablilty with earlier dlm protocol versions. It takes some time to
detect if a peer node has a specific DLM version. If it's not detected,
we just cut the socket connection. There could be cases where the local
node has not detected the version yet, but the peer node has.  In these
cases, we are trying to shutdown the dlm connection with a FIN/ACK message
exchange to be sure the other peer is ready to shutdown the connection on
dlm application level.  However this mechanism is only available on DLM
protocol version 3.2 and we need to be sure the DLM version is detected
before.

To make it more robust we introduce a a "best effort" wait to wait for the
version detection before shutdown the dlm connection. This need to be
done before the kthread recoverd for recovery handling is stopped,
because recovery handling will trigger enough messages to have a version
detection going on.

It is a corner case which was detected by modprobe dlm_locktroture module
and rmmod dlm_locktorture module directly afterwards (in a looping
behaviour). In practice probably nobody would leave a lockspace immediately
after joining it.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-01-23 14:58:19 -06:00
Alexander Aring
89835b064f fs: dlm: ignore unexpected non dlm opts msgs
This patch ignores unexpected RCOM_NAMES/RCOM_STATUS messages.
To be backwards compatible, those messages are not part of the new
reliable DLM OPTS encapsulation header, and have their own
retransmit handling using sequence number matching  When we get
unexpected non dlm opts messages, we should allow them and let
RCOM message handling filter them out using sequence numbers.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-01-23 14:42:02 -06:00
Alexander Aring
54fbe0c15d fs: dlm: bring back previous shutdown handling
This patch mostly reverts commit 4f567acb0b ("fs: dlm: remove socket
shutdown handling"). There can be situations where the dlm midcomms nodes
hash and lowcomms connection hash are not equal, but we need to guarantee
that the lowcomms are all closed on a last release of a dlm lockspace,
when a shutdown is invoked. This patch guarantees that we always close
all sockets managed by the lowcomms connection hash, and calls shutdown
for the last message sent. This ensures we don't cut the socket, which
could cause the peer to get a connection reset.

In future we should try to merge the midcomms/lowcomms hashes into one
hash and not handle both in separate hashes.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-01-23 14:36:37 -06:00
Alexander Aring
00908b3388 fs: dlm: send FIN ack back in right cases
This patch moves to send a ack back for receiving a FIN message only
when we are in valid states. In other cases and there might be a sender
waiting for a ack we just let it timeout at the senders time and
hopefully all other cleanups will remove the FIN message on their
sending queue. As an example we should never send out an ACK being in
LAST_ACK state or we cannot assume a working socket communication when
we are in CLOSED state.

Cc: stable@vger.kernel.org
Fixes: 489d8e559c ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2023-01-23 14:30:07 -06:00