- Fill out the build string
- Prevent inode fork extent count overflows
- Refactor the allocator to reduce long tail latency
- Rework incore log locking a little to reduce spinning
- Break up the xfs_iomap_begin functions into smaller more cohesive
parts
- Fix allocation alignment being dropped too early when the allocation
request is for more blocks than an AG is large
- Other small cleanups
- Clean up file buftarg retrieval helpers
- Hoist the resvsp and unresvsp ioctls to the vfs
- Remove the undocumented biosize mount option, since it has never been
mentioned as existing or supported on linux
- Clean up some of the mount option printing and parsing
- Enhance attr leaf verifier to check block structure
- Check dirent and attr names for invalid characters before passing them
to the vfs
- Refactor open-coded bmbt walking
- Fix a few places where we return EIO instead of EFSCORRUPTED after
failing metadata sanity checks
- Fix a synchronization problem between fallocate and aio dio corrupting
the file length
- Clean up various loose ends in the iomap and bmap code
- Convert to the new mount api
- Make sure we always log something when returning EFSCORRUPTED
- Fix some problems where long running scrub loops could trigger soft
lockup warnings and/or fail to exit due to fatal signals pending
- Fix various Coverity complaints
- Remove most of the function pointers from the directory code to reduce
indirection penalties
- Ensure that dquots are attached to the inode when performing unwritten
extent conversion after io
- Deuglify incore projid and crtime types
- Fix another AGI/AGF locking order deadlock when renaming
- Clean up some quota typedefs
- Remove the FSSETDM ioctls which haven't done anything in 20 years
- Fix some memory leaks when mounting the log fails
- Fix an underflow when updating an xattr leaf freemap
- Remove some trivial wrappers
- Report metadata corruption as an error, not a (potentially) fatal
assertion
- Clean up the dir/attr buffer mapping code
- Allow fatal signals to kill scrub during parent pointer checks
-----BEGIN PGP SIGNATURE-----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=aACq
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.5-merge-16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull XFS updates from Darrick Wong:
"For this release, we changed quite a few things.
Highlights:
- Fixed some long tail latency problems in the block allocator
- Removed some long deprecated (and for the past several years no-op)
mount options and ioctls
- Strengthened the extended attribute and directory verifiers
- Audited and fixed all the places where we could return EFSCORRUPTED
without logging anything
- Refactored the old SGI space allocation ioctls to make the
equivalent fallocate calls
- Fixed a race between fallocate and directio
- Fixed an integer overflow when files have more than a few
billion(!) extents
- Fixed a longstanding bug where quota accounting could be incorrect
when performing unwritten extent conversion on a freshly mounted fs
- Fixed various complaints in scrub about soft lockups and
unresponsiveness to signals
- De-vtable'd the directory handling code, which should make it
faster
- Converted to the new mount api, for better or for worse
- Cleaned up some memory leaks
and quite a lot of other smaller fixes and cleanups.
A more detailed summary:
- Fill out the build string
- Prevent inode fork extent count overflows
- Refactor the allocator to reduce long tail latency
- Rework incore log locking a little to reduce spinning
- Break up the xfs_iomap_begin functions into smaller more cohesive
parts
- Fix allocation alignment being dropped too early when the
allocation request is for more blocks than an AG is large
- Other small cleanups
- Clean up file buftarg retrieval helpers
- Hoist the resvsp and unresvsp ioctls to the vfs
- Remove the undocumented biosize mount option, since it has never
been mentioned as existing or supported on linux
- Clean up some of the mount option printing and parsing
- Enhance attr leaf verifier to check block structure
- Check dirent and attr names for invalid characters before passing
them to the vfs
- Refactor open-coded bmbt walking
- Fix a few places where we return EIO instead of EFSCORRUPTED after
failing metadata sanity checks
- Fix a synchronization problem between fallocate and aio dio
corrupting the file length
- Clean up various loose ends in the iomap and bmap code
- Convert to the new mount api
- Make sure we always log something when returning EFSCORRUPTED
- Fix some problems where long running scrub loops could trigger soft
lockup warnings and/or fail to exit due to fatal signals pending
- Fix various Coverity complaints
- Remove most of the function pointers from the directory code to
reduce indirection penalties
- Ensure that dquots are attached to the inode when performing
unwritten extent conversion after io
- Deuglify incore projid and crtime types
- Fix another AGI/AGF locking order deadlock when renaming
- Clean up some quota typedefs
- Remove the FSSETDM ioctls which haven't done anything in 20 years
- Fix some memory leaks when mounting the log fails
- Fix an underflow when updating an xattr leaf freemap
- Remove some trivial wrappers
- Report metadata corruption as an error, not a (potentially) fatal
assertion
- Clean up the dir/attr buffer mapping code
- Allow fatal signals to kill scrub during parent pointer checks"
* tag 'xfs-5.5-merge-16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (198 commits)
xfs: allow parent directory scans to be interrupted with fatal signals
xfs: remove the mappedbno argument to xfs_da_get_buf
xfs: remove the mappedbno argument to xfs_da_read_buf
xfs: split xfs_da3_node_read
xfs: remove the mappedbno argument to xfs_dir3_leafn_read
xfs: remove the mappedbno argument to xfs_dir3_leaf_read
xfs: remove the mappedbno argument to xfs_attr3_leaf_read
xfs: remove the mappedbno argument to xfs_da_reada_buf
xfs: improve the xfs_dabuf_map calling conventions
xfs: refactor xfs_dabuf_map
xfs: simplify mappedbno handling in xfs_da_{get,read}_buf
xfs: report corruption only as a regular error
xfs: Remove kmem_zone_free() wrapper
xfs: Remove kmem_zone_destroy() wrapper
xfs: Remove slab init wrappers
xfs: fix attr leaf header freemap.size underflow
xfs: fix some memory leaks in log recovery
xfs: fix another missing include
xfs: remove XFS_IOC_FSSETDM and XFS_IOC_FSSETDM_BY_HANDLE
xfs: remove duplicated include from xfs_dir2_data.c
...
According to the comment in the code and commit log, some apps
expect atime >= mtime; but the introduced code results in
atime==mtime. Fix the comparison to guard against atime<mtime.
Fixes: 9b9c5bea0b ("cifs: do not return atime less than mtime")
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: stfrench@microsoft.com
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently when the client creates a cifsFileInfo structure for
a newly opened file, it allocates a list of byte-range locks
with a pointer to the new cfile and attaches this list to the
inode's lock list. The latter happens before initializing all
other fields, e.g. cfile->tlink. Thus a partially initialized
cifsFileInfo structure becomes available to other threads that
walk through the inode's lock list. One example of such a thread
may be an oplock break worker thread that tries to push all
cached byte-range locks. This causes NULL-pointer dereference
in smb2_push_mandatory_locks() when accessing cfile->tlink:
[598428.945633] BUG: kernel NULL pointer dereference, address: 0000000000000038
...
[598428.945749] Workqueue: cifsoplockd cifs_oplock_break [cifs]
[598428.945793] RIP: 0010:smb2_push_mandatory_locks+0xd6/0x5a0 [cifs]
...
[598428.945834] Call Trace:
[598428.945870] ? cifs_revalidate_mapping+0x45/0x90 [cifs]
[598428.945901] cifs_oplock_break+0x13d/0x450 [cifs]
[598428.945909] process_one_work+0x1db/0x380
[598428.945914] worker_thread+0x4d/0x400
[598428.945921] kthread+0x104/0x140
[598428.945925] ? process_one_work+0x380/0x380
[598428.945931] ? kthread_park+0x80/0x80
[598428.945937] ret_from_fork+0x35/0x40
Fix this by reordering initialization steps of the cifsFileInfo
structure: initialize all the fields first and then add the new
byte-range lock list to the inode's lock list.
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
- Various kerneldoc script enhancements.
- More RST conversions; those are slowing down as we run out of things to
convert, but we're a ways from done still.
- Dan's "maintainer profile entry" work landed at last. Now we just need
to get maintainers to fill in the profiles...
- A reworking of the parallel build setup to work better with a variety of
systems (and to not take over huge systems entirely in particular).
- The MAINTAINERS file is now converted to RST during the build.
Hopefully nobody ever tries to print this thing, or they will need to
load a lot of paper.
- A script and documentation making it easy for maintainers to add Link:
tags at commit time.
Also included is the removal of a bunch of spurious CR characters.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl3j5B0PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YtBcH/jIN2cO8/0YW2rjVT+1G6ytSdFUKx5WJ/lpf
5uBeCvuCeYhtCB6+BgnXvjykJ7jDW11/NJNjWqz/gsvD5l5FJK1rXarI/oz2Klyi
kcPtDmBF/ki4wz9qXzEpa0vg8LXdjeys50S1vE75qCzxZoPP7YjuRbPnLrlIJukv
JbDVi4p9kxgeHfRB4+BHOe5rFwA3mMmaxKNIX34Y+UUO2KZ0g/yUi1bAaQwQAdt+
PsORmkVQ8Puh3K9xRIr7dYlcWBlBiPqzYdvDgTVxSjrxdK6wjYjSgVk2VjC5MBUN
mTSTWgyfsIcD/76/s8tq7ZRl2fw+SkCSkFo79Rb/hJwDTb7Vnng=
=LPBr
-----END PGP SIGNATURE-----
Merge tag 'docs-5.5a' of git://git.lwn.net/linux
Pull Documentation updates from Jonathan Corbet:
"Here are the main documentation changes for 5.5:
- Various kerneldoc script enhancements.
- More RST conversions; those are slowing down as we run out of
things to convert, but we're a ways from done still.
- Dan's "maintainer profile entry" work landed at last. Now we just
need to get maintainers to fill in the profiles...
- A reworking of the parallel build setup to work better with a
variety of systems (and to not take over huge systems entirely in
particular).
- The MAINTAINERS file is now converted to RST during the build.
Hopefully nobody ever tries to print this thing, or they will need
to load a lot of paper.
- A script and documentation making it easy for maintainers to add
Link: tags at commit time.
Also included is the removal of a bunch of spurious CR characters"
* tag 'docs-5.5a' of git://git.lwn.net/linux: (91 commits)
docs: remove a bunch of stray CRs
docs: fix up the maintainer profile document
libnvdimm, MAINTAINERS: Maintainer Entry Profile
Maintainer Handbook: Maintainer Entry Profile
MAINTAINERS: Reclaim the P: tag for Maintainer Entry Profile
docs, parallelism: Rearrange how jobserver reservations are made
docs, parallelism: Do not leak blocking mode to other readers
docs, parallelism: Fix failure path and add comment
Documentation: Remove bootmem_debug from kernel-parameters.txt
Documentation: security: core.rst: fix warnings
Documentation/process/howto/kokr: Update for 4.x -> 5.x versioning
Documentation/translation: Use Korean for Korean translation title
docs/memory-barriers.txt: Remove remaining references to mmiowb()
docs/memory-barriers.txt/kokr: Update I/O section to be clearer about CPU vs thread
docs/memory-barriers.txt/kokr: Fix style, spacing and grammar in I/O section
Documentation/kokr: Kill all references to mmiowb()
docs/memory-barriers.txt/kokr: Rewrite "KERNEL I/O BARRIER EFFECTS" section
docs: Add initial documentation for devfreq
Documentation: Document how to get links with git am
docs: Add request_irq() documentation
...
Merge updates from Andrew Morton:
"Incoming:
- a small number of updates to scripts/, ocfs2 and fs/buffer.c
- most of MM
I still have quite a lot of material (mostly not MM) staged after
linux-next due to -next dependencies. I'll send those across next week
as the preprequisites get merged up"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits)
mm/page_io.c: annotate refault stalls from swap_readpage
mm/Kconfig: fix trivial help text punctuation
mm/Kconfig: fix indentation
mm/memory_hotplug.c: remove __online_page_set_limits()
mm: fix typos in comments when calling __SetPageUptodate()
mm: fix struct member name in function comments
mm/shmem.c: cast the type of unmap_start to u64
mm: shmem: use proper gfp flags for shmem_writepage()
mm/shmem.c: make array 'values' static const, makes object smaller
userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK
fs/userfaultfd.c: wp: clear VM_UFFD_MISSING or VM_UFFD_WP during userfaultfd_register()
userfaultfd: wrap the common dst_vma check into an inlined function
userfaultfd: remove unnecessary WARN_ON() in __mcopy_atomic_hugetlb()
userfaultfd: use vma_pagesize for all huge page size calculation
mm/madvise.c: use PAGE_ALIGN[ED] for range checking
mm/madvise.c: replace with page_size() in madvise_inject_error()
mm/mmap.c: make vma_merge() comment more easy to understand
mm/hwpoison-inject: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
autonuma: reduce cache footprint when scanning page tables
autonuma: fix watermark checking in migrate_balanced_pgdat()
...
-----BEGIN PGP SIGNATURE-----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=hnf4
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20191129' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"I wasn't going to send this one off so soon, but unfortunately one of
the fixes from the previous pull broke the build on some archs. So I'm
sending this sooner rather than later. This contains:
- Add highmem.h include for io_uring, because of the kmap() additions
from last round. For some reason the build bot didn't spot this
even though it sat for days.
- Three minor ';' removals
- Add support for the Beurer CD-on-a-chip device
- Make io_uring work on MMU-less archs"
* tag 'for-linus-20191129' of git://git.kernel.dk/linux-block:
io_uring: fix missing kmap() declaration on powerpc
ataflop: Remove unneeded semicolon
block: sunvdc: Remove unneeded semicolon
drbd: Remove unneeded semicolon
io_uring: add mapping support for NOMMU archs
sr_vendor: support Beurer GL50 evo CD-on-a-chip devices.
cdrom: respect device capabilities during opening action
This is a series of cleanups for the y2038 work, mostly intended
for namespace cleaning: the kernel defines the traditional
time_t, timeval and timespec types that often lead to y2038-unsafe
code. Even though the unsafe usage is mostly gone from the kernel,
having the types and associated functions around means that we
can still grow new users, and that we may be missing conversions
to safe types that actually matter.
There are still a number of driver specific patches needed to
get the last users of these types removed, those have been
submitted to the respective maintainers.
Link: https://lore.kernel.org/lkml/20191108210236.1296047-1-arnd@arndb.de/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Bdbv
-----END PGP SIGNATURE-----
Merge tag 'y2038-cleanups-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull y2038 cleanups from Arnd Bergmann:
"y2038 syscall implementation cleanups
This is a series of cleanups for the y2038 work, mostly intended for
namespace cleaning: the kernel defines the traditional time_t, timeval
and timespec types that often lead to y2038-unsafe code. Even though
the unsafe usage is mostly gone from the kernel, having the types and
associated functions around means that we can still grow new users,
and that we may be missing conversions to safe types that actually
matter.
There are still a number of driver specific patches needed to get the
last users of these types removed, those have been submitted to the
respective maintainers"
Link: https://lore.kernel.org/lkml/20191108210236.1296047-1-arnd@arndb.de/
* tag 'y2038-cleanups-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (26 commits)
y2038: alarm: fix half-second cut-off
y2038: ipc: fix x32 ABI breakage
y2038: fix typo in powerpc vdso "LOPART"
y2038: allow disabling time32 system calls
y2038: itimer: change implementation to timespec64
y2038: move itimer reset into itimer.c
y2038: use compat_{get,set}_itimer on alpha
y2038: itimer: compat handling to itimer.c
y2038: time: avoid timespec usage in settimeofday()
y2038: timerfd: Use timespec64 internally
y2038: elfcore: Use __kernel_old_timeval for process times
y2038: make ns_to_compat_timeval use __kernel_old_timeval
y2038: socket: use __kernel_old_timespec instead of timespec
y2038: socket: remove timespec reference in timestamping
y2038: syscalls: change remaining timeval to __kernel_old_timeval
y2038: rusage: use __kernel_old_timeval
y2038: uapi: change __kernel_time_t to __kernel_old_time_t
y2038: stat: avoid 'time_t' in 'struct stat'
y2038: ipc: remove __kernel_time_t reference from headers
y2038: vdso: powerpc: avoid timespec references
...
As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need support
for time64_t.
In completely unrelated work, I spent time on cleaning up parts of this
file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the rest
of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which is
the scsi ioctl handlers. I have patches for those as well, but they need
more testing or possibly a rewrite.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lgCl
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
A while ago Andy noticed
(http://lkml.kernel.org/r/CALCETrWY+5ynDct7eU_nDUqx=okQvjm=Y5wJvA4ahBja=CQXGw@mail.gmail.com)
that UFFD_FEATURE_EVENT_FORK used by an unprivileged user may have
security implications.
As the first step of the solution the following patch limits the availably
of UFFD_FEATURE_EVENT_FORK only for those having CAP_SYS_PTRACE.
The usage of CAP_SYS_PTRACE ensures compatibility with CRIU.
Yet, if there are other users of non-cooperative userfaultfd that run
without CAP_SYS_PTRACE, they would be broken :(
Current implementation of UFFD_FEATURE_EVENT_FORK modifies the file
descriptor table from the read() implementation of uffd, which may have
security implications for unprivileged use of the userfaultfd.
Limit availability of UFFD_FEATURE_EVENT_FORK only for callers that have
CAP_SYS_PTRACE.
Link: http://lkml.kernel.org/r/1572967777-8812-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Daniel Colascione <dancol@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Nick Kralevich <nnk@google.com>
Cc: Nosh Minwalla <nosh@google.com>
Cc: Pavel Emelyanov <ovzxemul@gmail.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the registration is repeated without VM_UFFD_MISSING or VM_UFFD_WP they
need to be cleared. Currently setting UFFDIO_REGISTER_MODE_WP returns
-EINVAL, so this patch is a noop until the UFFDIO_REGISTER_MODE_WP support
is applied.
Link: http://lkml.kernel.org/r/20191004232834.GP13922@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The first parameter hstate in function hugetlb_fault_mutex_hash() is not
used anymore.
This patch removes it.
[akpm@linux-foundation.org: various build fixes]
[cai@lca.pw: fix a GCC compilation warning]
Link: http://lkml.kernel.org/r/1570544108-32331-1-git-send-email-cai@lca.pw
Link: http://lkml.kernel.org/r/20191005003302.785-1-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With hugetlbfs, a common pattern for mapping anonymous huge pages is to
create a temporary file first. Currently libraries like libhugetlbfs
and seastar create these with a standard mkstemp+unlink trick, but it
would be more robust to be able to simply pass the O_TMPFILE flag to
open(). O_TMPFILE is already supported by several file systems like
ext4 and xfs. The implementation simply uses the existi= ng d_tmpfile
utility function to instantiate the dcache entry for the file.
Tested manually by successfully creating a temporary file by opening it
with (O_TMPFILE|O_RDWR) on mounted hugetlbfs and successfully mapping 2M
huge pages with it. Without the patch, trying to open a file with
O_TMPFILE results in -ENOSUP.
Link: http://lkml.kernel.org/r/bc9383eff6e1374d79f3a92257ae829ba1e6ae60.1573285189.git.p.sarna@tlen.pl
Signed-off-by: Piotr Sarna <p.sarna@tlen.pl>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is assumed that the hugetlbfs_vfsmount[] array will contain either a
valid vfsmount pointer or NULL for each hstate after initialization.
Changes made while converting to use fs_context broke this assumption.
While fixing the hugetlbfs_vfsmount issue, it was discovered that
init_hugetlbfs_fs never did correctly clean up when encountering a vfs
mount error.
It was found during code inspection. A small memory allocation failure
would be the most likely cause of taking a error path with the bug.
This is unlikely to happen as this is early init code.
Link: http://lkml.kernel.org/r/94b6244d-2c24-e269-b12c-e3ba694b242d@oracle.com
Reported-by: Chengguang Xu <cgxu519@mykernel.net>
Fixes: 32021982a3 ("hugetlbfs: Convert to fs_context")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A new clang diagnostic (-Wsizeof-array-div) warns about the calculation
to determine the number of u32's in an array of unsigned longs.
Suppress warning by adding parentheses.
While looking at the above issue, noticed that the 'address' parameter
to hugetlb_fault_mutex_hash is no longer used. So, remove it from the
definition and all callers.
No functional change.
Link: http://lkml.kernel.org/r/20190919011847.18400-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Ilie Halip <ilie.halip@gmail.com>
Cc: David Bolvansky <david.bolvansky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This helper prints warning if direct I/O write failed to invalidate cache,
and set EIO at inode to warn usersapce about possible data corruption.
See also commit 5a9d929d6e ("iomap: report collisions between directio
and buffered writes to userspace").
Direct I/O is supported by non-disk filesystems, for example NFS. Thus
generic code needs this even in kernel without CONFIG_BLOCK.
Link: http://lkml.kernel.org/r/157270038074.4812.7980855544557488880.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The declarations of __block_write_begin_int and guard_bio_eod are needed
from internal.h so include it to fix the following sparse warnings:
fs/buffer.c:1930:5: warning: symbol '__block_write_begin_int' was not declared. Should it be static?
fs/buffer.c:2994:6: warning: symbol 'guard_bio_eod' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20191011170039.16100-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use true/false for bool return type of has_bh_in_lru().
Link: http://lkml.kernel.org/r/20191029040529.GA7625@saurav
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a static code checker warning:
fs/ocfs2/acl.c:331
ocfs2_acl_chmod() warn: passing zero to 'PTR_ERR'
Link: http://lkml.kernel.org/r/1dee278b-6c96-eec2-ce76-fe6e07c6e20f@linux.alibaba.com
Fixes: 5ee0fbd50f ("ocfs2: revert using ocfs2_acl_chmod to avoid inode cluster lock hang")
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl3dbM4UHHBhdWxAcGF1
bC1tb29yZS5jb20ACgkQ6iDy2pc3iXMagw/+MiOlIHFykjK0NGOyUbXR7AwjdrHz
1Fgkh7VZCAHMfCcdlljIIkYe7P+ybfdK51E1QLBiTPGh353JJRAvrjFbDcIyT4kf
u7AVddUeT0QQefFs39ZFWTV0mvJjDBfjFkmiL3cdY9ulx4ZX8V426qjyl8KIwTHe
YkQF3pYMmO28G1SfZu298zTmrFRA10FezxCUbBRZTTE9FcD7mnGQRB7w/wY9t0H1
ebIDgDA0EBh3oznGD3qxD63b5ULdSrImTzvSmEfhzZZsoZB4XGO5MOnLRqgBwFbT
qfRSRfHVl+1JtDHCU43zOUlzScAsff5mvfVNdDMLAFtGGSjDGxgxKNyLwp8+5wmH
GzvB99QQECvCN+gbaedm6adWBGzi7vpoCcgfqY0UPLYvCqsNFbZw4U/iu5ONKWy/
cEGVUGzHf0pWofugDIJfGQuRt6iS2XT9Ode6+QMx8OiC3auZcluhTuJSxMQIhFZ1
5XmoHOQddBwlalmIx8fsIHSo6xsAjNFwTOikEFVzUB+ECR2Urs8eHvQj+d94xz6e
q9LrNkt/eVIDiI+PeP+UBD5IJlfmRSoyUd/mIDFMfmqMBubBSQl70Eyt3dUdt1Bz
0PBs6xjYztpgk3Q7s35TMn8EvDcEksG0WEoFM5fEohYPLWQf8tJ5BbyYJJqc0sod
ExlXu1lPfg9ppKc=
=fc7R
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20191126' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Audit is back for v5.5, albeit with only two patches:
- Allow for the auditing of suspicious O_CREAT usage via the new
AUDIT_ANOM_CREAT record.
- Remove a redundant if-conditional check found during code analysis.
It's a minor change, but when the pull request is only two patches
long, you need filler in the pull request email"
[ Heh on the pull request filler. I wish more people tried to write
better pull request messages, even if maybe it's not worth it for the
trivial cases ;^) - Linus ]
* tag 'audit-pr-20191126' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: remove redundant condition check in kauditd_thread()
audit: Report suspicious O_CREAT usage
-----BEGIN PGP SIGNATURE-----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=FKC7
-----END PGP SIGNATURE-----
Merge tag 'notifications-pipe-prep-20191115' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull pipe rework from David Howells:
"This is my set of preparatory patches for building a general
notification queue on top of pipes. It makes a number of significant
changes:
- It removes the nr_exclusive argument from __wake_up_sync_key() as
this is always 1. This prepares for the next step:
- Adds wake_up_interruptible_sync_poll_locked() so that poll can be
woken up from a function that's holding the poll waitqueue
spinlock.
- Change the pipe buffer ring to be managed in terms of unbounded
head and tail indices rather than bounded index and length. This
means that reading the pipe only needs to modify one index, not
two.
- A selection of helper functions are provided to query the state of
the pipe buffer, plus a couple to apply updates to the pipe
indices.
- The pipe ring is allowed to have kernel-reserved slots. This allows
many notification messages to be spliced in by the kernel without
allowing userspace to pin too many pages if it writes to the same
pipe.
- Advance the head and tail indices inside the pipe waitqueue lock
and use wake_up_interruptible_sync_poll_locked() to poke poll
without having to take the lock twice.
- Rearrange pipe_write() to preallocate the buffer it is going to
write into and then drop the spinlock. This allows kernel
notifications to then be added the ring whilst it is filling the
buffer it allocated. The read side is stalled because the pipe
mutex is still held.
- Don't wake up readers on a pipe if there was already data in it
when we added more.
- Don't wake up writers on a pipe if the ring wasn't full before we
removed a buffer"
* tag 'notifications-pipe-prep-20191115' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
pipe: Remove sync on wake_ups
pipe: Increase the writer-wakeup threshold to reduce context-switch count
pipe: Check for ring full inside of the spinlock in pipe_write()
pipe: Remove redundant wakeup from pipe_write()
pipe: Rearrange sequence in pipe_write() to preallocate slot
pipe: Conditionalise wakeup in pipe_read()
pipe: Advance tail pointer inside of wait spinlock in pipe_read()
pipe: Allow pipes to have kernel-reserved slots
pipe: Use head and tail pointers for the ring, not cursor and length
Add wake_up_interruptible_sync_poll_locked()
Remove the nr_exclusive argument from __wake_up_sync_key()
pipe: Reduce #inclusion of pipe_fs_i.h
vfs_rmdir and vfs_unlink can return -EBUSY if the
target is a mountpoint. This currently gets passed to
nfserrno() by nfsd_unlink(), and that results in a WARNing,
which is not user-friendly.
Possibly the best NFSv4 error is NFS4ERR_FILE_OPEN, because
there is a sense in which the object is currently in use
by some other task. The Linux NFSv4 client will map this
back to EBUSY, which is an added benefit.
For NFSv3, the best we can do is probably NFS3ERR_ACCES, which isn't
true, but is not less true than the other options.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The NFSv4.2 CLONE operation has implicit persistence requirements on the
target file, since there is no protocol requirement that the client issue
a separate operation to persist data.
For that reason, we should call vfs_fsync_range() on the destination file
after a successful call to vfs_clone_file_range().
Fixes: ffa0160a10 ("nfsd: implement the NFSv4.2 CLONE operation")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAl3hAmYACgkQnJ2qBz9k
QNna+AgAs/6eWmQqEwij9+E761bELuMXIp8Ej9OxrBgE9Uls0VsMOsG1xfFoue+J
sZme9XSUQ+STqPQzTi6FH4x1n5kL3VnZzjRDv9qpsRCfMzX1MbibczNvXuCCgGuP
cKr3gPFX+GSDwQPEJX7tzF5zLZ1t1XOc4TD/H6v/X+2Nr/N1lnYeAaNcfFiGMyg1
Pk9JK2/qUoqWASCx6zxHG/lfjmaSSIrOwaKFACNHH0/6Luc1M7Oee3M9T/jS2IEo
8/WTS4o9CwOUFaEPemuUBv4yHyBpbJwsM+emwNKrNDSWbI5vP3ECOO7c4c+1/abS
FcwPvkHyAQnpSgmeYlhfTjZfA/A6+w==
=m7WG
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"Three fsnotify cleanups"
* tag 'fsnotify_for_v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: Add git tree reference to MAINTAINERS
fsnotify/fdinfo: exportfs_encode_inode_fh() takes pointer as 4th argument
fsnotify: move declaration of fsnotify_mark_connector_cachep to fsnotify.h
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAl3hAFIACgkQnJ2qBz9k
QNkV/gf+Kwn7xHg76YXd15lZYBzhgj/ABAYEEAAVY49OOCK5+XVmmAufHesMZ2lU
Solt8PvbQ8d5786bWpaYXgrTU3JW37c6x1MDUPDLQ8goXWzx7pZWvD+Yup558rDa
H1aoqvFKLgpeVVqkUdvvv2CDbgZyOgGlkDqWeS+c5pZd1NPFZzUAoU26slvQ5h4f
t41mbavOIm5DChQ5UjwRNw+pb09GXaHrPBRJwa1XuJYJWAansBcQIsxiiqt/43Gn
AzwUGrsz4vrPBk+Kcd0SGb8vinFVQr19gBFKFeN3rPFUEUn6T0FPBqaYeiNTNE37
AqASYKlIuhcSf0Wdvx6vxwSHsFl5VA==
=NGxV
-----END PGP SIGNATURE-----
Merge tag 'for_v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, quota, reiserfs cleanups and fixes from Jan Kara:
- Refactor the quota on/off kernel internal interfaces (mostly for
ubifs quota support as ubifs does not want to have inodes holding
quota information)
- A few other small quota fixes and cleanups
- Various small ext2 fixes and cleanups
- Reiserfs xattr fix and one cleanup
* tag 'for_v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (28 commits)
ext2: code cleanup for descriptor_loc()
fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned long
ext2: fix improper function comment
ext2: code cleanup for ext2_try_to_allocate()
ext2: skip unnecessary operations in ext2_try_to_allocate()
ext2: Simplify initialization in ext2_try_to_allocate()
ext2: code cleanup by calling ext2_group_last_block_no()
ext2: introduce new helper ext2_group_last_block_no()
reiserfs: replace open-coded atomic_dec_and_mutex_lock()
ext2: check err when partial != NULL
quota: Handle quotas without quota inodes in dquot_get_state()
quota: Make dquot_disable() work without quota inodes
quota: Drop dquot_enable()
fs: Use dquot_load_quota_inode() from filesystems
quota: Rename vfs_load_quota_inode() to dquot_load_quota_inode()
quota: Simplify dquot_resume()
quota: Factor out setup of quota inode
quota: Check that quota is not dirty before release
quota: fix livelock in dquot_writeback_dquots
ext2: don't set *count in the case of failure in ext2_try_to_allocate()
...
- Introduce superblock checksum support;
- Set iowait when waiting I/O for sync decompression path;
- Several code cleanups.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCXd/dwRYcZ2FveGlhbmcy
NUBodWF3ZWkuY29tAAoJEDk3MdwfteYEjd4BANBpFIxoenCeu9A8XVG4TVIobyoz
g/eci9QZr+rgPGl/AP93QFEAPmjwQi6iNQREwvXQ96EE9rMX0Legt3tFeHPRCw==
=xdz3
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"No major kernel updates for this round since I'm fully diving into
LZMA algorithm internals now to provide high CR XZ algorihm support.
That needs more work and time for me to get a better compression time.
Summary:
- Introduce superblock checksum support
- Set iowait when waiting I/O for sync decompression path
- Several code cleanups"
* tag 'erofs-for-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: remove unnecessary output in erofs_show_options()
erofs: drop all vle annotations for runtime names
erofs: support superblock checksum
erofs: set iowait for sync decompression
erofs: clean up decompress queue stuffs
erofs: get rid of __stagingpage_alloc helper
erofs: remove dead code since managed cache is now built-in
erofs: clean up collection handling routines
-----BEGIN PGP SIGNATURE-----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=EIrP
-----END PGP SIGNATURE-----
Merge tag '5.5-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
"Various smb3 fixes (including 12 for stable) and also features
(addition of multichannel support)"
* tag '5.5-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (41 commits)
CIFS: fix a white space issue in cifs_get_inode_info()
cifs: update internal module version number
cifs: Always update signing key of first channel
cifs: Fix retrieval of DFS referrals in cifs_mount()
cifs: Fix potential softlockups while refreshing DFS cache
cifs: Fix lookup of root ses in DFS referral cache
cifs: Fix use-after-free bug in cifs_reconnect()
cifs: dump channel info in DebugData
smb3: dump in_send and num_waiters stats counters by default
cifs: try harder to open new channels
CIFS: Properly process SMB3 lease breaks
cifs: move cifsFileInfo_put logic into a work-queue
cifs: try opening channels after mounting
CIFS: refactor cifs_get_inode_info()
cifs: switch servers depending on binding state
cifs: add server param
cifs: add multichannel mount options and data structs
cifs: sort interface list by speed
CIFS: Fix SMB2 oplock break processing
cifs: don't use 'pre:' for MODULE_SOFTDEP
...
In this round, we've introduced fairly small number of patches as below.
Enhancement:
- improve the in-place-update IO flow
- allocate segment to guarantee no GC for pinned files
Bug fix:
- fix updatetime in lazytime mode
- potential memory leak in f2fs_listxattr
- record parent inode number in rename2 correctly
- fix deadlock in f2fs_gc along with atomic writes
- avoid needless data migration in GC
-----BEGIN PGP SIGNATURE-----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=qyrd
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've introduced fairly small number of patches as below.
Enhancements:
- improve the in-place-update IO flow
- allocate segment to guarantee no GC for pinned files
Bug fixes:
- fix updatetime in lazytime mode
- potential memory leak in f2fs_listxattr
- record parent inode number in rename2 correctly
- fix deadlock in f2fs_gc along with atomic writes
- avoid needless data migration in GC"
* tag 'f2fs-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: stop GC when the victim becomes fully valid
f2fs: expose main_blkaddr in sysfs
f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project()
f2fs: Fix deadlock in f2fs_gc() context during atomic files handling
f2fs: show f2fs instance in printk_ratelimited
f2fs: fix potential overflow
f2fs: fix to update dir's i_pino during cross_rename
f2fs: support aligned pinned file
f2fs: avoid kernel panic on corruption test
f2fs: fix wrong description in document
f2fs: cache global IPU bio
f2fs: fix to avoid memory leakage in f2fs_listxattr
f2fs: check total_segments from devices in raw_super
f2fs: update multi-dev metadata in resize_fs
f2fs: mark recovery flag correctly in read_raw_super_block()
f2fs: fix to update time in lazytime mode
-----BEGIN PGP SIGNATURE-----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=YjAm
-----END PGP SIGNATURE-----
Merge tag 'afs-next-20191121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS updates from David Howells:
"Minor cleanups and fix:
- Minor fix to make some debugging statements display information
from the correct iov_iter.
- Rename some members and variables to make things more obvious or
consistent.
- Provide a helper to wrap increments of the usage count on the
afs_read struct.
- Use scnprintf() to print into a stack buffer rather than sprintf().
- Remove some set but unused variables"
* tag 'afs-next-20191121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Remove set but not used variable 'ret'
afs: Remove set but not used variables 'before', 'after'
afs: xattr: use scnprintf
afs: Introduce an afs_get_read() refcount helper
afs: Rename desc -> req in afs_fetch_data()
afs: Switch the naming of call->iter and call->_iter
afs: Use call->_iter not &call->iter in debugging statements
* Direct I/O via iomap (required the iomap-for-next branch from Darrick
as a prereq).
* Support for using dioread-nolock where the block size < page size.
* Support for encryption for file systems where the block size < page size.
* Rework of journal credits handling so a revoke-heavy workload will
not cause the journal to run out of space.
* Replace bit-spinlocks with spinlocks in jbd2
Also included were some bug fixes and cleanups, mostly to clean up
corner cases from fuzzed file systems and error path handling.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl3dHxoACgkQ8vlZVpUN
gaMZswf5AbtQhTEJDXO7Pc1ull38GIGFgAv7uAth0TymLC3h1/FEYWW0crEPFsDr
1Eei55UUVOYrMMUKQ4P7wlLX0cIh3XDPMWnRFuqBoV5/ZOsH/ZSbkY//TG2Xze/v
9wXIH/RKQnzbRtXffJ1+DnvmXJk+HFm1R1gjl0nfyUXGrnlSfqJxhLSczyd6bJJq
ehi/tso5UC/4EQsAIdWp7VWsAdaHcZ7ogHqDoy8dXpM1equ408iml7VlKr8R+Nr7
5ANpCISXChSlLLYm0NYN5vhO8upF5uDxWLdCtxVPL5kFdM2m/ELjXw9h9C+78l7C
EWJGlGlxvx07Px+e+bfStEsoixpWBg==
=0eko
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"This merge window saw the the following new featuers added to ext4:
- Direct I/O via iomap (required the iomap-for-next branch from
Darrick as a prereq).
- Support for using dioread-nolock where the block size < page size.
- Support for encryption for file systems where the block size < page
size.
- Rework of journal credits handling so a revoke-heavy workload will
not cause the journal to run out of space.
- Replace bit-spinlocks with spinlocks in jbd2
Also included were some bug fixes and cleanups, mostly to clean up
corner cases from fuzzed file systems and error path handling"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (59 commits)
ext4: work around deleting a file with i_nlink == 0 safely
ext4: add more paranoia checking in ext4_expand_extra_isize handling
jbd2: make jbd2_handle_buffer_credits() handle reserved handles
ext4: fix a bug in ext4_wait_for_tail_page_commit
ext4: bio_alloc with __GFP_DIRECT_RECLAIM never fails
ext4: code cleanup for get_next_id
ext4: fix leak of quota reservations
ext4: remove unused variable warning in parse_options()
ext4: Enable encryption for subpage-sized blocks
fs/buffer.c: support fscrypt in block_read_full_page()
ext4: Add error handling for io_end_vec struct allocation
jbd2: Fine tune estimate of necessary descriptor blocks
jbd2: Provide trace event for handle restarts
ext4: Reserve revoke credits for freed blocks
jbd2: Make credit checking more strict
jbd2: Rename h_buffer_credits to h_total_credits
jbd2: Reserve space for revoke descriptor blocks
jbd2: Drop jbd2_space_needed()
jbd2: Account descriptor blocks into t_outstanding_credits
jbd2: Factor out common parts of stopping and restarting a handle
...
- Fix another place in the splice code where a pipe could ask a
filesystem for a longer read than the pipe actually has free buffer
space.
-----BEGIN PGP SIGNATURE-----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=ripU
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.5-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull splice fix from Darrick Wong:
"Fix another place in the splice code where a pipe could ask a
filesystem for a longer read than the pipe actually has free buffer
space"
* tag 'vfs-5.5-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
splice: only read in as much information as there is pipe buffer space
- Make iomap_dio_rw callers explicitly tell us if they want us to wait
- Port the xfs writeback code to iomap to complete the buffered io
library functions
- Refactor the unshare code to share common pieces
- Add support for performing copy on write with buffered writes
- Other minor fixes
- Fix unchecked return in iomap_bmap
- Fix a type casting bug in a ternary statement in iomap_dio_bio_actor
- Improve tracepoints for easier diagnostic ability
- Fix pipe page leakage in directio reads
-----BEGIN PGP SIGNATURE-----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=FRl4
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.5-merge-11' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"In this release, we hoisted as much of XFS' writeback code into iomap
as was practicable, refactored the unshare file data function, added
the ability to perform buffered io copy on write, and tweaked various
parts of the directio implementation as needed to port ext4's directio
code (that will be a separate pull).
Summary:
- Make iomap_dio_rw callers explicitly tell us if they want us to
wait
- Port the xfs writeback code to iomap to complete the buffered io
library functions
- Refactor the unshare code to share common pieces
- Add support for performing copy on write with buffered writes
- Other minor fixes
- Fix unchecked return in iomap_bmap
- Fix a type casting bug in a ternary statement in
iomap_dio_bio_actor
- Improve tracepoints for easier diagnostic ability
- Fix pipe page leakage in directio reads"
* tag 'iomap-5.5-merge-11' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (31 commits)
iomap: Fix pipe page leakage during splicing
iomap: trace iomap_appply results
iomap: fix return value of iomap_dio_bio_actor on 32bit systems
iomap: iomap_bmap should check iomap_apply return value
iomap: Fix overflow in iomap_page_mkwrite
fs/iomap: remove redundant check in iomap_dio_rw()
iomap: use a srcmap for a read-modify-write I/O
iomap: renumber IOMAP_HOLE to 0
iomap: use write_begin to read pages to unshare
iomap: move the zeroing case out of iomap_read_page_sync
iomap: ignore non-shared or non-data blocks in xfs_file_dirty
iomap: always use AOP_FLAG_NOFS in iomap_write_begin
iomap: remove the unused iomap argument to __iomap_write_end
iomap: better document the IOMAP_F_* flags
iomap: enhance writeback error message
iomap: pass a struct page to iomap_finish_page_writeback
iomap: cleanup iomap_ioend_compare
iomap: move struct iomap_page out of iomap.h
iomap: warn on inline maps in iomap_writepage_map
iomap: lift the xfs writeback code to iomap
...
Christophe reports that current master fails building on powerpc with
this error:
CC fs/io_uring.o
fs/io_uring.c: In function ‘loop_rw_iter’:
fs/io_uring.c:1628:21: error: implicit declaration of function ‘kmap’
[-Werror=implicit-function-declaration]
iovec.iov_base = kmap(iter->bvec->bv_page)
^
fs/io_uring.c:1628:19: warning: assignment makes pointer from integer
without a cast [-Wint-conversion]
iovec.iov_base = kmap(iter->bvec->bv_page)
^
fs/io_uring.c:1643:4: error: implicit declaration of function ‘kunmap’
[-Werror=implicit-function-declaration]
kunmap(iter->bvec->bv_page);
^
which is caused by a missing highmem.h include. Fix it by including
it.
Fixes: 311ae9e159 ("io_uring: fix dead-hung for non-iter fixed rw")
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit f2538f9993. The patch
stopped JFFS2 from being able to mount an existing filesystem with the
following errors:
jffs2: error: (77) jffs2_build_inode_fragtree: Add node to tree failed -22
jffs2: error: (77) jffs2_do_read_inode_internal: Failed to build final fragtree for inode #5377: error -22
Fixes: f2538f9993 ("jffs2: Fix possible null-pointer dereferences...")
Cc: stable@vger.kernel.org
Suggested-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Richard Weinberger <richard@nod.at>
-----BEGIN PGP SIGNATURE-----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=HqiO
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/io_uring-post-20191128' of git://git.kernel.dk/linux-block
Pull more io_uring updates from Jens Axboe:
"As mentioned in the first pull request, there was a later batch as
well. This contains fixes to the stuff that already went in, cleanups,
and a few later additions. In particular, this contains:
- Cleanups/fixes/unification of the submission and completion path
(Pavel,me)
- Linked timeouts improvements (Pavel,me)
- Error path fixes (me)
- Fix lookup window where cancellations wouldn't work (me)
- Improve DRAIN support (Pavel)
- Fix backlog flushing -EBUSY on submit (me)
- Add support for connect(2) (me)
- Fix for non-iter based fixed IO (Pavel)
- creds inheritance for async workers (me)
- Disable cmsg/ancillary data for sendmsg/recvmsg (me)
- Shrink io_kiocb to 3 cachelines (me)
- NUMA fix for io-wq (Jann)"
* tag 'for-5.5/io_uring-post-20191128' of git://git.kernel.dk/linux-block: (42 commits)
io_uring: make poll->wait dynamically allocated
io-wq: shrink io_wq_work a bit
io-wq: fix handling of NUMA node IDs
io_uring: use kzalloc instead of kcalloc for single-element allocations
io_uring: cleanup io_import_fixed()
io_uring: inline struct sqe_submit
io_uring: store timeout's sqe->off in proper place
net: disallow ancillary data for __sys_{send,recv}msg_file()
net: separate out the msghdr copy from ___sys_{send,recv}msg()
io_uring: remove superfluous check for sqe->off in io_accept()
io_uring: async workers should inherit the user creds
io-wq: have io_wq_create() take a 'data' argument
io_uring: fix dead-hung for non-iter fixed rw
io_uring: add support for IORING_OP_CONNECT
net: add __sys_connect_file() helper
io_uring: only return -EBUSY for submit on non-flushed backlog
io_uring: only !null ptr to io_issue_sqe()
io_uring: simplify io_req_link_next()
io_uring: pass only !null to io_req_find_next()
io_uring: remove io_free_req_find_next()
...
That is a bit weird scenario but I find it interesting to run fio loads
using LKL linux, where MMU is disabled. Probably other real archs which
run uClinux can also benefit from this patch.
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the ceph filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
[ Numerous string handling, leak and regression fixes; rbd conversion
was particularly broken and had to be redone almost from scratch. ]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Here is the "big" set of driver core patches for 5.5-rc1
There's a few minor cleanups and fixes in here, but the majority of the
patches in here fall into two buckets:
- debugfs api cleanups and fixes
- driver core device link support for boot dependancy issues
The debugfs api cleanups are working to slowly refactor the debugfs apis
so that it is even harder to use incorrectly. That work has been
happening for the past few kernel releases and will continue over time,
it's a long-term project/goal
The driver core device link support missed 5.4 by just a bit, so it's
been sitting and baking for many months now. It's from Saravana Kannan
to help resolve the problems that DT-based systems have at boot time
with dependancy graphs and kernel modules. Turns out that no one has
actually tried to build a generic arm64 kernel with loads of modules and
have it "just work" for a variety of platforms (like a distro kernel)
The big problem turned out to be a lack of depandancy information
between different areas of DT entries, and the work here resolves that
problem and now allows devices to boot properly, and quicker than a
monolith kernel.
All of these patches have been in linux-next for a long time with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXd6m6Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yntJQCcCqg6RQ7LTdHuZv1ETeefXlsfk00An1Jtean6
42bWGx52bGFvAcpjWy8R
=P7hq
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core patches for 5.5-rc1
There's a few minor cleanups and fixes in here, but the majority of
the patches in here fall into two buckets:
- debugfs api cleanups and fixes
- driver core device link support for boot dependancy issues
The debugfs api cleanups are working to slowly refactor the debugfs
apis so that it is even harder to use incorrectly. That work has been
happening for the past few kernel releases and will continue over
time, it's a long-term project/goal
The driver core device link support missed 5.4 by just a bit, so it's
been sitting and baking for many months now. It's from Saravana Kannan
to help resolve the problems that DT-based systems have at boot time
with dependancy graphs and kernel modules. Turns out that no one has
actually tried to build a generic arm64 kernel with loads of modules
and have it "just work" for a variety of platforms (like a distro
kernel). The big problem turned out to be a lack of dependency
information between different areas of DT entries, and the work here
resolves that problem and now allows devices to boot properly, and
quicker than a monolith kernel.
All of these patches have been in linux-next for a long time with no
reported issues"
* tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits)
tracing: Remove unnecessary DEBUG_FS dependency
of: property: Add device link support for interrupt-parent, dmas and -gpio(s)
debugfs: Fix !DEBUG_FS debugfs_create_automount
of: property: Add device link support for "iommu-map"
of: property: Fix the semantics of of_is_ancestor_of()
i2c: of: Populate fwnode in of_i2c_get_board_info()
drivers: base: Fix Kconfig indentation
firmware_loader: Fix labels with comma for builtin firmware
driver core: Allow device link operations inside sync_state()
driver core: platform: Declare ret variable only once
cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h>
crypto: hisilicon: no need to check return value of debugfs_create functions
driver core: platform: use the correct callback type for bus_find_device
firmware_class: make firmware caching configurable
driver core: Clarify documentation for fwnode_operations.add_links()
mailbox: tegra: Fix superfluous IRQ error message
net: caif: Fix debugfs on 64-bit platforms
mac80211: Use debugfs_create_xul() helper
media: c8sectpfe: no need to check return value of debugfs_create functions
of: property: Add device link support for iommus, mboxes and io-channels
...
We accidentally messed up the indenting on this if statement.
Fixes: 16c696a6c300 ("CIFS: refactor cifs_get_inode_info()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Allow a fatal signal to interrupt us when we're scanning a directory to
verify a parent pointer.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
exit_aio() is sometimes stuck in wait_for_completion() after aio is issued
with direct IO and the task receives a signal.
The reason is failure to call ->ki_complete() due to a leaked reference to
fuse_io_priv. This happens in fuse_async_req_send() if
fuse_simple_background() returns an error (e.g. -EINTR).
In this case the error value is propagated via io->err, so return success
to not confuse callers.
This issue is tracked as a virtio-fs issue:
https://gitlab.com/virtio-fs/qemu/issues/14
Reported-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Fixes: 45ac96ed7c ("fuse: convert direct_io to simple api")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- A comprehensive rewrite of the robust/PI futex code's exit handling
to fix various exit races. (Thomas Gleixner et al)
- Rework the generic REFCOUNT_FULL implementation using
atomic_fetch_* operations so that the performance impact of the
cmpxchg() loops is mitigated for common refcount operations.
With these performance improvements the generic implementation of
refcount_t should be good enough for everybody - and this got
confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and
REFCOUNT_FULL entirely, leaving the generic implementation enabled
unconditionally. (Will Deacon)
- Other misc changes, fixes, cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
lkdtm: Remove references to CONFIG_REFCOUNT_FULL
locking/refcount: Remove unused 'refcount_error_report()' function
locking/refcount: Consolidate implementations of refcount_t
locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
locking/refcount: Move saturation warnings out of line
locking/refcount: Improve performance of generic REFCOUNT_FULL code
locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
locking/refcount: Remove unused refcount_*_checked() variants
locking/refcount: Ensure integer operands are treated as signed
locking/refcount: Define constants for saturation and max refcount values
futex: Prevent exit livelock
futex: Provide distinct return value when owner is exiting
futex: Add mutex around futex exit
futex: Provide state handling for exec() as well
futex: Sanitize exit state handling
futex: Mark the begin of futex exit explicitly
futex: Set task::futex_state to DEAD right after handling futex exit
futex: Split futex_mm_release() for exit/exec
exit/exec: Seperate mm_release()
futex: Replace PF_EXITPIDONE with a state
...
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle were:
- Dynamic tick (nohz) updates, perhaps most notably changes to force
the tick on when needed due to lengthy in-kernel execution on CPUs
on which RCU is waiting.
- Linux-kernel memory consistency model updates.
- Replace rcu_swap_protected() with rcu_prepace_pointer().
- Torture-test updates.
- Documentation updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
security/safesetid: Replace rcu_swap_protected() with rcu_replace_pointer()
net/sched: Replace rcu_swap_protected() with rcu_replace_pointer()
net/netfilter: Replace rcu_swap_protected() with rcu_replace_pointer()
net/core: Replace rcu_swap_protected() with rcu_replace_pointer()
bpf/cgroup: Replace rcu_swap_protected() with rcu_replace_pointer()
fs/afs: Replace rcu_swap_protected() with rcu_replace_pointer()
drivers/scsi: Replace rcu_swap_protected() with rcu_replace_pointer()
drm/i915: Replace rcu_swap_protected() with rcu_replace_pointer()
x86/kvm/pmu: Replace rcu_swap_protected() with rcu_replace_pointer()
rcu: Upgrade rcu_swap_protected() to rcu_replace_pointer()
rcu: Suppress levelspread uninitialized messages
rcu: Fix uninitialized variable in nocb_gp_wait()
rcu: Update descriptions for rcu_future_grace_period tracepoint
rcu: Update descriptions for rcu_nocb_wake tracepoint
rcu: Remove obsolete descriptions for rcu_barrier tracepoint
rcu: Ensure that ->rcu_urgent_qs is set before resched IPI
workqueue: Convert for_each_wq to use built-in list check
rcu: Several rcu_segcblist functions can be static
rcu: Remove unused function hlist_bl_del_init_rcu()
Documentation: Rename rcu_node_context_switch() to rcu_note_context_switch()
...
Pull scheduler updates from Ingo Molnar:
"The biggest changes in this cycle were:
- Make kcpustat vtime aware (Frederic Weisbecker)
- Rework the CFS load_balance() logic (Vincent Guittot)
- Misc cleanups, smaller enhancements, fixes.
The load-balancing rework is the most intrusive change: it replaces
the old heuristics that have become less meaningful after the
introduction of the PELT metrics, with a grounds-up load-balancing
algorithm.
As such it's not really an iterative series, but replaces the old
load-balancing logic with the new one. We hope there are no
performance regressions left - but statistically it's highly probable
that there *is* going to be some workload that is hurting from these
chnages. If so then we'd prefer to have a look at that workload and
fix its scheduling, instead of reverting the changes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
rackmeter: Use vtime aware kcpustat accessor
leds: Use all-in-one vtime aware kcpustat accessor
cpufreq: Use vtime aware kcpustat accessors for user time
procfs: Use all-in-one vtime aware kcpustat accessor
sched/vtime: Bring up complete kcpustat accessor
sched/cputime: Support other fields on kcpustat_field()
sched/cpufreq: Move the cfs_rq_util_change() call to cpufreq_update_util()
sched/fair: Add comments for group_type and balancing at SD_NUMA level
sched/fair: Fix rework of find_idlest_group()
sched/uclamp: Fix overzealous type replacement
sched/Kconfig: Fix spelling mistake in user-visible help text
sched/core: Further clarify sched_class::set_next_task()
sched/fair: Use mul_u32_u32()
sched/core: Simplify sched_class::pick_next_task()
sched/core: Optimize pick_next_task()
sched/core: Make pick_next_task_idle() more consistent
sched/fair: Better document newidle_balance()
leds: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
cpufreq: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
procfs: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
...
In the quest to bring io_kiocb down to 3 cachelines, this one does
the trick. Make the wait_queue_entry for the poll command come out
of kmalloc instead of embedding it in struct io_poll_iocb, as the
latter is the largest member of io_kiocb. Once we trim this down a
bit, we're back at a healthy 192 bytes for struct io_kiocb.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we're using 40 bytes for the io_wq_work structure, and 16 of
those is the doubly link list node. We don't need doubly linked lists,
we always add to tail to keep things ordered, and any other use case
is list traversal with deletion. For the deletion case, we can easily
support any node deletion by keeping track of the previous entry.
This shrinks io_wq_work to 32 bytes, and subsequently io_kiock from
io_uring to 216 to 208 bytes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are several things that can go wrong in the current code on NUMA
systems, especially if not all nodes are online all the time:
- If the identifiers of the online nodes do not form a single contiguous
block starting at zero, wq->wqes will be too small, and OOB memory
accesses will occur e.g. in the loop in io_wq_create().
- If a node comes online between the call to num_online_nodes() and the
for_each_node() loop in io_wq_create(), an OOB write will occur.
- If a node comes online between io_wq_create() and io_wq_enqueue(), a
lookup is performed for an element that doesn't exist, and an OOB read
will probably occur.
Fix it by:
- using nr_node_ids instead of num_online_nodes() for the allocation size;
nr_node_ids is calculated by setup_nr_node_ids() to be bigger than the
highest node ID that could possibly come online at some point, even if
those nodes' identifiers are not a contiguous block
- creating workers for all possible CPUs, not just all online ones
This is basically what the normal workqueue code also does, as far as I can
tell.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These allocations are single-element allocations, so don't use the array
allocation wrapper for them.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Clean io_import_fixed() call site and make it return proper type.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no point left in keeping struct sqe_submit. Inline it
into struct io_kiocb, so any req->submit.field is now just req->field
- moves initialisation of ring_file into io_get_req()
- removes duplicated req->sequence.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Timeouts' sequence offset (i.e. sqe->off) is stored in
req->submit.sequence under a false name. Keep it in timeout.data
instead. The unused space for sequence will be reclaimed in the
following patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 0be0ee7181.
I was hoping it would be benign to switch over entirely to FMODE_STREAM,
and we'd have just a couple of small fixups we'd need, but it looks like
we're not quite there yet.
While it worked fine on both my desktop and laptop, they are fairly
similar in other respects, and run mostly the same loads. Kenneth
Crudup reports that it seems to break both his vmware installation and
the KDE upower service. In both cases apparently leading to timeouts
due to waitinmg for the f_pos lock.
There are a number of character devices in particular that definitely
want stream-like behavior, but that currently don't get marked as
streams, and as a result get the exclusion between concurrent
read()/write() on the same file descriptor. Which doesn't work well for
them.
The most obvious example if this is /dev/console and /dev/tty, which use
console_fops and tty_fops respectively (and ptmx_fops for the pty master
side). It may be that it's just this that causes problems, but we
clearly weren't ready yet.
Because there's a number of other likely common cases that don't have
llseek implementations and would seem to act as stream devices:
/dev/fuse (fuse_dev_operations)
/dev/mcelog (mce_chrdev_ops)
/dev/mei0 (mei_fops)
/dev/net/tun (tun_fops)
/dev/nvme0 (nvme_dev_fops)
/dev/tpm0 (tpm_fops)
/proc/self/ns/mnt (ns_file_operations)
/dev/snd/pcm* (snd_pcm_f_ops[])
and while some of these could be trivially automatically detected by the
vfs layer when the character device is opened by just noticing that they
have no read or write operations either, it often isn't that obvious.
Some character devices most definitely do use the file position, even if
they don't allow seeking: the firmware update code, for example, uses
simple_read_from_buffer() that does use f_pos, but doesn't allow seeking
back and forth.
We'll revisit this when there's a better way to detect the problem and
fix it (possibly with a coccinelle script to do more of the FMODE_STREAM
annotations).
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The 'start' variable indicates the start of a filemap and is set to the
iocb's position, which we have already cached as 'pos', upon function
entry.
'pos' is used as a cursor indicating the current position and updated
later in iomap_dio_rw(), but not before the last use of 'start'.
Remove 'start' as it's synonym for 'pos' before we're entering the loop
calling iomapp_apply().
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
iomap_dio_bio_actor() copies iter to a local variable and then limits it
to a file extent we have mapped. When IO is submitted,
iomap_dio_bio_actor() advances the original iter while the copied iter
is advanced inside bio_iov_iter_get_pages(). This logic is non-obvious
especially because both iters still point to same shared structures
(such as pipe info) so if iov_iter_advance() changes anything in the
shared structure, this scheme breaks. Let's just truncate and reexpand
the original iter as needed instead of playing games with copying iters
and keeping them in sync.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=QCEy
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow to print symbolic error names via new %pe modifier.
- Use pr_warn() instead of the remaining pr_warning() calls. Fix
formatting of the related lines.
- Add VSPRINTF entry to MAINTAINERS.
* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
checkpatch: don't warn about new vsprintf pointer extension '%pe'
MAINTAINERS: Add VSPRINTF
tools lib api: Renaming pr_warning to pr_warn
ASoC: samsung: Use pr_warn instead of pr_warning
lib: cpu_rmap: Use pr_warn instead of pr_warning
trace: Use pr_warn instead of pr_warning
dma-debug: Use pr_warn instead of pr_warning
vgacon: Use pr_warn instead of pr_warning
fs: afs: Use pr_warn instead of pr_warning
sh/intc: Use pr_warn instead of pr_warning
scsi: Use pr_warn instead of pr_warning
platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
platform/x86: asus-laptop: Use pr_warn instead of pr_warning
platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
oprofile: Use pr_warn instead of pr_warning
of: Use pr_warn instead of pr_warning
macintosh: Use pr_warn instead of pr_warning
idsn: Use pr_warn instead of pr_warning
ide: Use pr_warn instead of pr_warning
crypto: n2: Use pr_warn instead of pr_warning
...
Pull cgroup updates from Tejun Heo:
"There are several notable changes here:
- Single thread migrating itself has been optimized so that it
doesn't need threadgroup rwsem anymore.
- Freezer optimization to avoid unnecessary frozen state changes.
- cgroup ID unification so that cgroup fs ino is the only unique ID
used for the cgroup and can be used to directly look up live
cgroups through filehandle interface on 64bit ino archs. On 32bit
archs, cgroup fs ino is still the only ID in use but it is only
unique when combined with gen.
- selftest and other changes"
* 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits)
writeback: fix -Wformat compilation warnings
docs: cgroup: mm: Fix spelling of "list"
cgroup: fix incorrect WARN_ON_ONCE() in cgroup_setup_root()
cgroup: use cgrp->kn->id as the cgroup ID
kernfs: use 64bit inos if ino_t is 64bit
kernfs: implement custom exportfs ops and fid type
kernfs: combine ino/id lookup functions into kernfs_find_and_get_node_by_id()
kernfs: convert kernfs_node->id from union kernfs_node_id to u64
kernfs: kernfs_find_and_get_node_by_ino() should only look up activated nodes
kernfs: use dumber locking for kernfs_find_and_get_node_by_ino()
netprio: use css ID instead of cgroup ID
writeback: use ino_t for inodes in tracepoints
kernfs: fix ino wrap-around detection
kselftests: cgroup: Avoid the reuse of fd after it is deallocated
cgroup: freezer: don't change task and cgroups status unnecessarily
cgroup: use cgroup->last_bstat instead of cgroup->bstat_pending for consistency
cgroup: remove cgroup_enable_task_cg_lists() optimization
cgroup: pids: use atomic64_t for pids->limit
selftests: cgroup: Run test_core under interfering stress
selftests: cgroup: Add task migration tests
...
This field contains a pointer to addrlen and checking to see if it's set
returns -EINVAL if the caller sets addr & addrlen pointers.
Fixes: 17f2fe35d0 ("io_uring: add support for IORING_OP_ACCEPT")
Signed-off-by: Hrvoje Zeba <zeba.hrvoje@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently pass in 4 arguments outside of the bounded size. In
preparation for adding one more argument, let's bundle them up in
a struct to make it more readable.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Read/write requests to devices without implemented read/write_iter
using fixed buffers can cause general protection fault, which totally
hangs a machine.
io_import_fixed() initialises iov_iter with bvec, but loop_rw_iter()
accesses it as iovec, dereferencing random address.
kmap() page by page in this case
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows an application to call connect() in an async fashion. Like
other opcodes, we first try a non-blocking connect, then punt to async
context if we have to.
Note that we can still return -EINPROGRESS, and in that case the caller
should use IORING_OP_POLL_ADD to do an async wait for completion of the
connect request (just like for regular connect(2), except we can do it
async here too).
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We return -EBUSY on submit when we have a CQ ring overflow backlog, but
that can be a bit problematic if the application is using pure userspace
poll of the CQ ring. For that case, if the ring briefly overflowed and
we have pending entries in the backlog, the submit flushes the backlog
successfully but still returns -EBUSY. If we're able to fully flush the
CQ ring backlog, let the submission proceed.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass only non-null @nxt to io_issue_sqe() and handle it at the caller's
side. And propagate it.
- kiocb_done() is only called from io_read() and io_write(), which are
only called from io_issue_sqe(), so it's @nxt != NULL
- io_put_req_find_next() is called either with explicitly non-null local
nxt, or from one of the functions in io_issue_sqe() switch (or their
callees).
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
"if (nxt)" is always true, as it was checked in the while's condition.
io_wq_current_is_worker() is unnecessary, as non-async callers don't
pass nxt, so io_queue_async_work() will be called for them anyway.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make io_req_find_next() and io_req_link_next() to accept only non-null
nxt, and handle it in callers.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is only one one-liner user of io_free_req_find_next(). Inline it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The number of SQEs to submit is specified by a user, so io_get_sqring()
in most of the cases succeeds. Hint compilers about that.
Checking ASM genereted by gcc 9.2.0 for x64, there is one branch
misprediction.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_submit_sqe() is issuing requests, so call it as
such. Moreover, it ends by calling io_iopoll_req_issued().
Rename it and make terminology clearer.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't have shadow requests anymore, so get rid of the shadow
argument. Add the user_data argument, as that's often useful to easily
match up requests, instead of having to look at request pointers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's an issue with the shadow drain logic in that we drop the
completion lock after deciding to defer a request, then re-grab it later
and assume that the state is still the same. In the mean time, someone
else completing a request could have found and issued it. This can cause
a stall in the queue, by having a shadow request inserted that nobody is
going to drain.
Additionally, if we fail allocating the shadow request, we simply ignore
the drain.
Instead of using a shadow request, defer the next request/link instead.
This also has the following advantages:
- removes semi-duplicated code
- doesn't allocate memory for shadows
- works better if only the head marked for drain
- doesn't need complex synchronisation
On the flip side, it removes the shadow->seq ==
last_drain_in_in_link->seq optimization. That shouldn't be a common
case, and can always be added back, if needed.
Fixes: 4fe2c96315 ("io_uring: add support for link with drain")
Cc: Jackie Liu <liuyun01@kylinos.cn>
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we find new work to process within the work handler, we queue the
linked timeout before we have issued the new work. This can be
problematic for very short timeouts, as we have a window where the new
work isn't visible.
Allow the work handler to store a callback function for this in the work
item, and flag it with IO_WQ_WORK_CB if the caller has done so. If that
is set, then io-wq will call the callback when it has setup the new work
item.
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently try and start the next link when we put the request, and
only if we were going to free it. This means that the optimization to
continue executing requests from the same context often fails, as we're
not putting the final reference.
Add REQ_F_LINK_NEXT to keep track of this, and allow io_uring to find the
next request more efficiently.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently rely on the ring destroy on cleaning things up in case of
failure, but io_allocate_scq_urings() can leave things half initialized
if only parts of it fails.
Be nice and return with either everything setup in success, or return an
error with things nicely cleaned up.
Reported-by: syzbot+0d818c0d39399188f393@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Always mark requests with allocated sqe and deallocate it in
__io_free_req(). It's easier to follow and doesn't add edge cases.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently clear the linked timeout field if we cancel such a timeout,
but we should only attempt to cancel if it's the first one we see.
Others should simply be freed like other requests, as they haven't
been started yet.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
let have a dependant link: REQ -> LINK_TIMEOUT -> LINK_TIMEOUT
1. submission stage: submission references for REQ and LINK_TIMEOUT
are dropped. So, references respectively (1,1,2)
2. io_put(REQ) + FAIL_LINKS stage: calls io_fail_links(), which for all
linked timeouts will call cancel_timeout() and drop 1 reference.
So, references after: (0,0,1). That's a leak.
Make it treat only the first linked timeout as such, and pass others
through __io_double_put_req().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass any IORING_OP_LINK_TIMEOUT request further, where it will
eventually fail in io_issue_sqe().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If io_req_defer() failed, it needs to cancel a dependant link.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently have a race where if setup is really slow, we can be
calling io_wq_destroy() before we're done setting up. This will cause
the caller to get stuck waiting for the manager to set things up, but
the manager already exited.
Fix this by doing a sync setup of the manager. This also fixes the case
where if we failed creating workers, we'd also get stuck.
In practice this race window was really small, as we already wait for
the manager to start. Hence someone would have to call io_wq_destroy()
after the task has started, but before it started the first loop. The
reported test case forked tons of these, which is why it became an
issue.
Reported-by: syzbot+0f1cc17f85154f400465@syzkaller.appspotmail.com
Fixes: 771b53d033 ("io-wq: small threadpool implementation for io_uring")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently don't explicitly break links if a request is cancelled, but
we should. Add explicitly link breakage for all types of request
cancellations that we support.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently a poll request fills a completion entry of 0, even if it got
cancelled. This is odd, and it makes it harder to support with chains.
Ensure that it returns -ECANCELED in the completions events if it got
cancelled, and furthermore ensure that the linked timeout that triggered
it completes with -ETIME if we did indeed trigger the completions
through a timeout.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the conversion to io-wq, we no longer use that flag. Kill it.
Fixes: 561fb04a6a ("io_uring: replace workqueue usage with io-wq")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have an issue with timeout links that are deeper in the submit chain,
because we only handle it upfront, not from later submissions. Move the
prep + issue of the timeout link to the async work prep handler, and do
it normally for non-async queue. If we validate and prepare the timeout
links upfront when we first see them, there's nothing stopping us from
supporting any sort of nesting.
Fixes: 2665abfd75 ("io_uring: add support for linked SQE timeouts")
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are a few reasons for this:
- As a prep to improving the linked timeout logic
- io_timeout is the biggest member in the io_kiocb opcode union
This also enables a few cleanups, like unifying the timer setup between
IORING_OP_TIMEOUT and IORING_OP_LINK_TIMEOUT, and not needing multiple
arguments to the link/prep helpers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we don't use the normal completion path, we may skip killing links
that should be errored and freed. Add __io_double_put_req() for use
within the completion path itself, other calls should just use
io_double_put_req().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_queue_sqe(), io_queue_sqe(), io_queue_link_head() all return 0/err,
but the caller doesn't care since the errors are handled inline. Clean
these up and just make them void.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we have a linked request, this enables us to pass it back directly
without having to go through async context.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This kselftest update for Linux 5.5-rc1 adds KUnit, a lightweight unit
testing and mocking framework for the Linux kernel from Brendan Higgins.
KUnit is not an end-to-end testing framework. It is currently supported
on UML and sub-systems can write unit tests and run them in UML env.
KUnit documentation is included in this update.
In addition, this Kunit update adds 3 new kunit tests:
- kunit test for proc sysctl from Iurii Zaikin
- kunit test for the 'list' doubly linked list from David Gow
- ext4 kunit test for decoding extended timestamps from Iurii Zaikin
In the future KUnit will be linked to Kselftest framework to provide
a way to trigger KUnit tests from user-space.
-----BEGIN PGP SIGNATURE-----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=0zEe
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest KUnit support gtom Shuah Khan:
"This adds KUnit, a lightweight unit testing and mocking framework for
the Linux kernel from Brendan Higgins.
KUnit is not an end-to-end testing framework. It is currently
supported on UML and sub-systems can write unit tests and run them in
UML env. KUnit documentation is included in this update.
In addition, this Kunit update adds 3 new kunit tests:
- proc sysctl test from Iurii Zaikin
- the 'list' doubly linked list test from David Gow
- ext4 tests for decoding extended timestamps from Iurii Zaikin
In the future KUnit will be linked to Kselftest framework to provide a
way to trigger KUnit tests from user-space"
* tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits)
lib/list-test: add a test for the 'list' doubly linked list
ext4: add kunit test for decoding extended timestamps
Documentation: kunit: Fix verification command
kunit: Fix '--build_dir' option
kunit: fix failure to build without printk
MAINTAINERS: add proc sysctl KUnit test to PROC SYSCTL section
kernel/sysctl-test: Add null pointer test for sysctl.c:proc_dointvec()
MAINTAINERS: add entry for KUnit the unit testing framework
Documentation: kunit: add documentation for KUnit
kunit: defconfig: add defconfigs for building KUnit tests
kunit: tool: add Python wrappers for running KUnit tests
kunit: test: add tests for KUnit managed resources
kunit: test: add the concept of assertions
kunit: test: add tests for kunit test abort
kunit: test: add support for test abort
objtool: add kunit_try_catch_throw to the noreturn list
kunit: test: add initial tests
lib: enable building KUnit in lib/
kunit: test: add the concept of expectations
kunit: test: add assertion printing library
...
Expose the fs-verity bit through statx().
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXdtWqhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK+C9AQCCf8C2KP6DynoGQb9KRYYreJk8js8G
IgtlhazJ3j1RJAD/VijFbdwbxGCmiR1Y6BhKq5eaCYD1El68wSwkKuNO3ww=
=7WpU
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity updates from Eric Biggers:
"Expose the fs-verity bit through statx()"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
docs: fs-verity: mention statx() support
f2fs: support STATX_ATTR_VERITY
ext4: support STATX_ATTR_VERITY
statx: define STATX_ATTR_VERITY
docs: fs-verity: document first supported kernel version
- Add the IV_INO_LBLK_64 encryption policy flag which modifies the
encryption to be optimized for UFS inline encryption hardware.
- For AES-128-CBC, use the crypto API's implementation of ESSIV (which
was added in 5.4) rather than doing ESSIV manually.
- A few other cleanups.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXdtVMxQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK8MVAP44iRzj8ZXu62BhqNOYYcF60s/58QfZ
Jo1VdmvO/8MNrAD+P/jW5sqzcB5BLdNzS7pLKGIzsC55uMyp/79xyKK8wQc=
=XKWV
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
- Add the IV_INO_LBLK_64 encryption policy flag which modifies the
encryption to be optimized for UFS inline encryption hardware.
- For AES-128-CBC, use the crypto API's implementation of ESSIV (which
was added in 5.4) rather than doing ESSIV manually.
- A few other cleanups.
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
f2fs: add support for IV_INO_LBLK_64 encryption policies
ext4: add support for IV_INO_LBLK_64 encryption policies
fscrypt: add support for IV_INO_LBLK_64 policies
fscrypt: avoid data race on fscrypt_mode::logged_impl_name
docs: ioctl-number: document fscrypt ioctl numbers
fscrypt: zeroize fscrypt_info before freeing
fscrypt: remove struct fscrypt_ctx
fscrypt: invoke crypto API for ESSIV handling
-----BEGIN PGP SIGNATURE-----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=NomJ
-----END PGP SIGNATURE-----
Merge tag 'affs-for-5.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull AFFS updates from David Sterba:
"A minor bugfix and cleanup for AFFS"
* tag 'affs-for-5.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
affs: fix a memory leak in affs_remount
affs: Replace binary semaphores with mutexes
-----BEGIN PGP SIGNATURE-----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=JzIp
-----END PGP SIGNATURE-----
Merge tag 'for-5.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"User visible changes:
- new block group profiles: RAID1 with 3- and 4- copies
- RAID1 in btrfs has always 2 copies, now add support for 3 and 4
- this is an incompat feature (named RAID1C34)
- recommended use of RAID1C3 is replacement of RAID6 profile on
metadata, this brings a more reliable resiliency against 2
device loss/damage
- support for new checksums
- per-filesystem, set at mkfs time
- fast hash (crc32c successor): xxhash, 64bit digest
- strong hashes (both 256bit): sha256 (slower, FIPS), blake2b
(faster)
- the blake2b module goes via the crypto tree, btrfs.ko has a
soft dependency
- speed up lseek, don't take inode locks unnecessarily, this can
speed up parallel SEEK_CUR/SEEK_SET/SEEK_END by 80%
- send:
- allow clone operations within the same file
- limit maximum number of sent clone references to avoid slow
backref walking
- error message improvements: device scan prints process name and PID
Core changes:
- cleanups
- remove unique workqueue helpers, used to provide a way to avoid
deadlocks in the workqueue code, now done in a simpler way
- remove lots of indirect function calls in compression code
- extent IO tree code moved out of extent_io.c
- cleanup backup superblock handling at mount time
- transaction life cycle documentation and cleanups
- locking code cleanups, annotations and documentation
- add more cold, const, pure function attributes
- removal of unused or redundant struct members or variables
- new tree-checker sanity tests
- try to detect missing INODE_ITEM, cross-reference checks of
DIR_ITEM, DIR_INDEX, INODE_REF, and XATTR_* items
- remove own bio scheduling code (used to avoid checksum submissions
being stuck behind other IO), replaced by cgroup controller-based
code to allow better control and avoid priority inversions in cases
where the custom and cgroup scheduling disagreed
Fixes:
- avoid getting stuck during cyclic writebacks
- fix trimming of ranges crossing block group boundaries
- fix rename exchange on subvolumes, all involved subvolumes need to
be recorded in the transaction"
* tag 'for-5.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (137 commits)
btrfs: drop bdev argument from submit_extent_page
btrfs: remove extent_map::bdev
btrfs: drop bio_set_dev where not needed
btrfs: get bdev directly from fs_devices in submit_extent_page
btrfs: record all roots for rename exchange on a subvol
Btrfs: fix block group remaining RO forever after error during device replace
btrfs: scrub: Don't check free space before marking a block group RO
btrfs: change btrfs_fs_devices::rotating to bool
btrfs: change btrfs_fs_devices::seeding to bool
btrfs: rename btrfs_block_group_cache
btrfs: block-group: Reuse the item key from caller of read_one_block_group()
btrfs: block-group: Refactor btrfs_read_block_groups()
btrfs: document extent buffer locking
btrfs: access eb::blocking_writers according to ACCESS_ONCE policies
btrfs: set blocking_writers directly, no increment or decrement
btrfs: merge blocking_writers branches in btrfs_tree_read_lock
btrfs: drop incompat bit for raid1c34 after last block group is gone
btrfs: add incompat for raid1 with 3, 4 copies
btrfs: add support for 4-copy replication (raid1c4)
btrfs: add support for 3-copy replication (raid1c3)
...
-----BEGIN PGP SIGNATURE-----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=e5Lx
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-block
Pull disk revalidation updates from Jens Axboe:
"This continues the work that Jan Kara started to thoroughly cleanup
and consolidate how we handle rescans and revalidations"
* tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-block:
block: move clearing bd_invalidated into check_disk_size_change
block: remove (__)blkdev_reread_part as an exported API
block: fix bdev_disk_changed for non-partitioned devices
block: move rescan_partitions to fs/block_dev.c
block: merge invalidate_partitions into rescan_partitions
block: refactor rescan_partitions
-----BEGIN PGP SIGNATURE-----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=/G9l
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block
Pull zoned block device update from Jens Axboe:
"Enhancements and improvements to the zoned device support"
* tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block:
scsi: sd_zbc: Remove set but not used variable 'buflen'
block: rework zone reporting
scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
null_blk: Add zone_nr_conv to features
null_blk: clean up report zones
null_blk: clean up the block device operations
block: Remove partition support for zoned block devices
block: Simplify report zones execution
block: cleanup the !zoned case in blk_revalidate_disk_zones
block: Enhance blk_revalidate_disk_zones()
-----BEGIN PGP SIGNATURE-----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=HYYq
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/block-20191121' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Due to more granular branches, this one is small and will be followed
with other core branches that add specific features. I meant to just
have a core and drivers branch, but external dependencies we ended up
adding a few more that are also core.
The changes are:
- Fixes and improvements for the zoned device support (Ajay, Damien)
- sed-opal table writing and datastore UID (Revanth)
- blk-cgroup (and bfq) blk-cgroup stat fixes (Tejun)
- Improvements to the block stats tracking (Pavel)
- Fix for overruning sysfs buffer for large number of CPUs (Ming)
- Optimization for small IO (Ming, Christoph)
- Fix typo in RWH lifetime hint (Eugene)
- Dead code removal and documentation (Bart)
- Reduction in memory usage for queue and tag set (Bart)
- Kerneldoc header documentation (André)
- Device/partition revalidation fixes (Jan)
- Stats tracking for flush requests (Konstantin)
- Various other little fixes here and there (et al)"
* tag 'for-5.5/block-20191121' of git://git.kernel.dk/linux-block: (48 commits)
Revert "block: split bio if the only bvec's length is > SZ_4K"
block: add iostat counters for flush requests
block,bfq: Skip tracing hooks if possible
block: sed-opal: Introduce SUM_SET_LIST parameter and append it using 'add_token_u64'
blk-cgroup: cgroup_rstat_updated() shouldn't be called on cgroup1
block: Don't disable interrupts in trigger_softirq()
sbitmap: Delete sbitmap_any_bit_clear()
blk-mq: Delete blk_mq_has_free_tags() and blk_mq_can_queue()
block: split bio if the only bvec's length is > SZ_4K
block: still try to split bio if the bvec crosses pages
blk-cgroup: separate out blkg_rwstat under CONFIG_BLK_CGROUP_RWSTAT
blk-cgroup: reimplement basic IO stats using cgroup rstat
blk-cgroup: remove now unused blkg_print_stat_{bytes|ios}_recursive()
blk-throtl: stop using blkg->stat_bytes and ->stat_ios
bfq-iosched: stop using blkg->stat_bytes and ->stat_ios
bfq-iosched: relocate bfqg_*rwstat*() helpers
block: add zone open, close and finish ioctl support
block: add zone open, close and finish operations
block: Simplify REQ_OP_ZONE_RESET_ALL handling
block: Remove REQ_OP_ZONE_RESET plugging
...
-----BEGIN PGP SIGNATURE-----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=YZ9s
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/io_uring-20191121' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"A lot of stuff has been going on this cycle, with improving the
support for networked IO (and hence unbounded request completion
times) being one of the major themes. There's been a set of fixes done
this week, I'll send those out as well once we're certain we're fully
happy with them.
This contains:
- Unification of the "normal" submit path and the SQPOLL path (Pavel)
- Support for sparse (and bigger) file sets, and updating of those
file sets without needing to unregister/register again.
- Independently sized CQ ring, instead of just making it always 2x
the SQ ring size. This makes it more flexible for networked
applications.
- Support for overflowed CQ ring, never dropping events but providing
backpressure on submits.
- Add support for absolute timeouts, not just relative ones.
- Support for generic cancellations. This divorces io_uring from
workqueues as well, which additionally gets us one step closer to
generic async system call support.
- With cancellations, we can support grabbing the process file table
as well, just like we do mm context. This allows support for system
calls that create file descriptors, like accept4() support that's
built on top of that.
- Support for io_uring tracing (Dmitrii)
- Support for linked timeouts. These abort an operation if it isn't
completed by the time noted in the linke timeout.
- Speedup tracking of poll requests
- Various cleanups making the coder easier to follow (Jackie, Pavel,
Bob, YueHaibing, me)
- Update MAINTAINERS with new io_uring list"
* tag 'for-5.5/io_uring-20191121' of git://git.kernel.dk/linux-block: (64 commits)
io_uring: make POLL_ADD/POLL_REMOVE scale better
io-wq: remove now redundant struct io_wq_nulls_list
io_uring: Fix getting file for non-fd opcodes
io_uring: introduce req_need_defer()
io_uring: clean up io_uring_cancel_files()
io-wq: ensure free/busy list browsing see all items
io-wq: ensure we have a stable view of ->cur_work for cancellations
io_wq: add get/put_work handlers to io_wq_create()
io_uring: check for validity of ->rings in teardown
io_uring: fix potential deadlock in io_poll_wake()
io_uring: use correct "is IO worker" helper
io_uring: fix -ENOENT issue with linked timer with short timeout
io_uring: don't do flush cancel under inflight_lock
io_uring: flag SQPOLL busy condition to userspace
io_uring: make ASYNC_CANCEL work with poll and timeout
io_uring: provide fallback request for OOM situations
io_uring: convert accept4() -ERESTARTSYS into -EINTR
io_uring: fix error clear of ->file_table in io_sqe_files_register()
io_uring: separate the io_free_req and io_free_req_find_next interface
io_uring: keep io_put_req only responsible for release and put req
...
fdget_pos() is used by file operations that will read and update f_pos:
things like "read()", "write()" and "lseek()" (but not, for example,
"pread()/pwrite" that get their file positions elsewhere).
However, it had two separate escape clauses for this, because not
everybody wants or needs serialization of the file position.
The first and most obvious case is the "file descriptor doesn't have a
position at all", ie a stream-like file. Except we didn't actually use
FMODE_STREAM, but instead used FMODE_ATOMIC_POS. The reason for that
was that FMODE_STREAM didn't exist back in the days, but also that we
didn't want to mark all the special cases, so we only marked the ones
that _required_ position atomicity according to POSIX - regular files
and directories.
The case one was intentionally lazy, but now that we _do_ have
FMODE_STREAM we could and should just use it. With the change to use
FMODE_STREAM, there are no remaining uses for FMODE_ATOMIC_POS, and all
the code to set it is deleted.
Any cases where we don't want the serialization because the driver (or
subsystem) doesn't use the file position should just be updated to do
"stream_open()". We've done that for all the obvious and common
situations, we may need a few more. Quoting Kirill Smelkov in the
original FMODE_STREAM thread (see link below for full email):
"And I appreciate if people could help at least somehow with "getting
rid of mixed case entirely" (i.e. always lock f_pos_lock on
!FMODE_STREAM), because this transition starts to diverge from my
particular use-case too far. To me it makes sense to do that
transition as follows:
- convert nonseekable_open -> stream_open via stream_open.cocci;
- audit other nonseekable_open calls and convert left users that
truly don't depend on position to stream_open;
- extend stream_open.cocci to analyze alloc_file_pseudo as well (this
will cover pipes and sockets), or maybe convert pipes and sockets
to FMODE_STREAM manually;
- extend stream_open.cocci to analyze file_operations that use
no_llseek or noop_llseek, but do not use nonseekable_open or
alloc_file_pseudo. This might find files that have stream semantic
but are opened differently;
- extend stream_open.cocci to analyze file_operations whose
.read/.write do not use ppos at all (independently of how file was
opened);
- ...
- after that remove FMODE_ATOMIC_POS and always take f_pos_lock if
!FMODE_STREAM;
- gather bug reports for deadlocked read/write and convert missed
cases to FMODE_STREAM, probably extending stream_open.cocci along
the road to catch similar cases
i.e. always take f_pos_lock unless a file is explicitly marked as
being stream, and try to find and cover all files that are streams"
We have not done the "extend stream_open.cocci to analyze
alloc_file_pseudo" as well, but the previous commit did manually handle
the case of pipes and sockets.
The other case where we can avoid locking f_pos is the "this file
descriptor only has a single user and it is us, and thus there is no
need to lock it".
The second test was correct, although a bit subtle and worth just
re-iterating here. There are two kinds of other sources of references
to the same file descriptor: file descriptors that have been explicitly
shared across fork() or with dup(), and file tables having elevated
reference counts due to threading (or explicit file sharing with
clone()).
The first case would have incremented the file count explicitly, and in
the second case the previous __fdget() would have incremented it for us
and set the FDPUT_FPUT flag.
But in both cases the file count would be greater than one, so the
"file_count(file) > 1" test catches both situations. Also note that if
file_count is 1, that also means that no other thread can have access to
the file table, so there also cannot be races with concurrent calls to
dup()/fork()/clone() that would increment the file count any other way.
Link: https://lore.kernel.org/linux-fsdevel/20190413184404.GA13490@deco.navytux.spb.ru
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Eic Dumazet <edumazet@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Marco Elver <elver@google.com>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Paul McKenney <paulmck@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We must stop GC, once the segment becomes fully valid. Otherwise, it can
produce another dirty segments by moving valid blocks in the segment partially.
Ramon hit no free segment panic sometimes and saw this case happens when
validating reliable file pinning feature.
Signed-off-by: Ramon Pantin <pantin@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Expose in /sys/fs/f2fs/<blockdev>/main_blkaddr the block address where the
main area starts. This allows user mode programs to determine:
- That pinned files that are made exclusively of fully allocated 2MB
segments will never be unpinned by the file system.
- Where the main area starts. This is required by programs that want to
verify if a file is made exclusively of 2MB f2fs segments, the alignment
boundary for segments starts at this address. Testing for 2MB alignment
relative to the start of the device is incorrect, because for some
filesystems main_blkaddr is not at a 2MB boundary relative to the start
of the device.
The entry will be used when validating reliable pinning file feature proposed
by "f2fs: support aligned pinned file".
Signed-off-by: Ramon Pantin <pantin@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Setting softlimit larger than hardlimit seems meaningless
for disk quota but currently it is allowed. In this case,
there may be a bit of comfusion for users when they run
df comamnd to directory which has project quota.
For example, we set 20M softlimit and 10M hardlimit of
block usage limit for project quota of test_dir(project id 123).
[root@hades f2fs]# repquota -P -a
*** Report for project quotas on device /dev/nvme0n1p8
Block grace time: 7days; Inode grace time: 7days
Block limits File limits
Project used soft hard grace used soft hard grace
----------------------------------------------------------------------
0 -- 4 0 0 1 0 0
123 +- 10248 20480 10240 2 0 0
The result of df command as below:
[root@hades f2fs]# df -h /mnt/f2fs/test
Filesystem Size Used Avail Use% Mounted on
/dev/nvme0n1p8 20M 11M 10M 51% /mnt/f2fs
Even though it looks like there is another 10M free space to use,
if we write new data to diretory test(inherit project id),
the write will fail with errno(-EDQUOT).
After this patch, the df result looks like below.
[root@hades f2fs]# df -h /mnt/f2fs/test
Filesystem Size Used Avail Use% Mounted on
/dev/nvme0n1p8 10M 10M 0 100% /mnt/f2fs
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In commit 3975b097e5 ("convert stream-like files -> stream_open, even
if they use noop_llseek") Kirill used a coccinelle script to change
"nonseekable_open()" to "stream_open()", which changed the trivial cases
of stream-like file descriptors to the new model with FMODE_STREAM.
However, the two big cases - sockets and pipes - don't actually have
that trivial pattern at all, and were thus never converted to
FMODE_STREAM even though it makes lots of sense to do so.
That's particularly true when looking forward to the next change:
getting rid of FMODE_ATOMIC_POS entirely, and just using FMODE_STREAM to
decide whether f_pos updates are needed or not. And if they are, we'll
always do them atomically.
This came up because KCSAN (correctly) noted that the non-locked f_pos
updates are data races: they are clearly benign for the case where we
don't care, but it would be good to just not have that issue exist at
all.
Note that the reason we used FMODE_ATOMIC_POS originally is that only
doing it for the minimal required case is "safer" in that it's possible
that the f_pos locking can cause unnecessary serialization across the
whole write() call. And in the worst case, that kind of serialization
can cause deadlock issues: think writers that need readers to empty the
state using the same file descriptor.
[ Note that the locking is per-file descriptor - because it protects
"f_pos", which is obviously per-file descriptor - so it only affects
cases where you literally use the same file descriptor to both read
and write.
So a regular pipe that has separate reading and writing file
descriptors doesn't really have this situation even though it's the
obvious case of "reader empties what a bit writer concurrently fills"
But we want to make pipes as being stream-line anyway, because we
don't want the unnecessary overhead of locking, and because a named
pipe can be (ab-)used by reading and writing to the same file
descriptor. ]
There are likely a lot of other cases that might want FMODE_STREAM, and
looking for ".llseek = no_llseek" users and other cases that don't have
an lseek file operation at all and making them use "stream_open()" might
be a good idea. But pipes and sockets are likely to be the two main
cases.
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Eic Dumazet <edumazet@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Marco Elver <elver@google.com>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Paul McKenney <paulmck@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update signing key of first channel whenever generating the master
sigining/encryption/decryption keys rather than only in cifs_mount().
This also fixes reconnect when re-establishing smb sessions to other
servers.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We used to skip reconnects on all SMB2_IOCTL commands due to SMB3+
FSCTL_VALIDATE_NEGOTIATE_INFO - which made sense since we're still
establishing a SMB session.
However, when refresh_cache_worker() calls smb2_get_dfs_refer() and
we're under reconnect, SMB2_ioctl() will not be able to get a proper
status error (e.g. -EHOSTDOWN in case we failed to reconnect) but an
-EAGAIN from cifs_send_recv() thus looping forever in
refresh_cache_worker().
Fixes: e99c63e4d8 ("SMB3: Fix deadlock in validate negotiate hits reconnect")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Suggested-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We don't care about module aliasing validation in
cifs_compose_mount_options(..., is_smb3) when finding the root SMB
session of an DFS namespace in order to refresh DFS referral cache.
The following issue has been observed when mounting with '-t smb3' and
then specifying 'vers=2.0':
...
Nov 08 15:27:08 tw kernel: address conversion returned 0 for FS0.WIN.LOCAL
Nov 08 15:27:08 tw kernel: [kworke] ==> dns_query((null),FS0.WIN.LOCAL,13,(null))
Nov 08 15:27:08 tw kernel: [kworke] call request_key(,FS0.WIN.LOCAL,)
Nov 08 15:27:08 tw kernel: [kworke] ==> dns_resolver_cmp(FS0.WIN.LOCAL,FS0.WIN.LOCAL)
Nov 08 15:27:08 tw kernel: [kworke] <== dns_resolver_cmp() = 1
Nov 08 15:27:08 tw kernel: [kworke] <== dns_query() = 13
Nov 08 15:27:08 tw kernel: fs/cifs/dns_resolve.c: dns_resolve_server_name_to_ip: resolved: FS0.WIN.LOCAL to 192.168.30.26
===> Nov 08 15:27:08 tw kernel: CIFS VFS: vers=2.0 not permitted when mounting with smb3
Nov 08 15:27:08 tw kernel: fs/cifs/dfs_cache.c: CIFS VFS: leaving refresh_tcon (xid = 26) rc = -22
...
Fixes: 5072010ccf ("cifs: Fix DFS cache refresher for DFS links")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We currently just pass junk in this field unless we're retransmitting a
create, but in later patches, we'll need a mechanism to pass a delegated
inode number on an initial create request. Prepare for this by ensuring
this field is zeroed out.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When this occurs, it usually means that we raced with a rename, and
there is no need to warn in that case. Only printk if we pass the
rename sequence check but still ended up with pos < 0.
Either way, this doesn't warrant a KERN_ERR message. Change it to
KERN_WARNING.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For example, if we have 5 mds in the mdsmap and the states are:
m_info[5] --> [-1, 1, -1, 1, 1]
If we get a random number 1, then we should get the mds index 3 as
expected, but actually we will get index 2, which the state is -1.
The issue is that the for loop increment will advance past any "up"
MDS that was found during the while loop search.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
None of these helper functions change anything in memory, so we can
declare their arguments as const.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
* show server&TCP states for extra channels
* mention if an interface has a channel connected to it
In this version three of the patch, fixed minor printk format
issue pointed out by the kbuild robot.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Number of requests in_send and the number of waiters on sendRecv
are useful counters in various cases, move them from
CONFIG_CIFS_STATS2 to be on by default especially with multichannel
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Previously we would only loop over the iface list once.
This patch tries to loop over multiple times until all channels are
opened. It will also try to reuse RSS ifaces.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currenly we doesn't assume that a server may break a lease
from RWH to RW which causes us setting a wrong lease state
on a file and thus mistakenly flushing data and byte-range
locks and purging cached data on the client. This leads to
performance degradation because subsequent IOs go directly
to the server.
Fix this by propagating new lease state and epoch values
to the oplock break handler through cifsFileInfo structure
and removing the use of cifsInodeInfo flags for that. It
allows to avoid some races of several lease/oplock breaks
using those flags in parallel.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch moves the final part of the cifsFileInfo_put() logic where we
need a write lock on lock_sem to be processed in a separate thread that
holds no other locks.
This is to prevent deadlocks like the one below:
> there are 6 processes looping to while trying to down_write
> cinode->lock_sem, 5 of them from _cifsFileInfo_put, and one from
> cifs_new_fileinfo
>
> and there are 5 other processes which are blocked, several of them
> waiting on either PG_writeback or PG_locked (which are both set), all
> for the same page of the file
>
> 2 inode_lock() (inode->i_rwsem) for the file
> 1 wait_on_page_writeback() for the page
> 1 down_read(inode->i_rwsem) for the inode of the directory
> 1 inode_lock()(inode->i_rwsem) for the inode of the directory
> 1 __lock_page
>
>
> so processes are blocked waiting on:
> page flags PG_locked and PG_writeback for one specific page
> inode->i_rwsem for the directory
> inode->i_rwsem for the file
> cifsInodeInflock_sem
>
>
>
> here are the more gory details (let me know if I need to provide
> anything more/better):
>
> [0 00:48:22.765] [UN] PID: 8863 TASK: ffff8c691547c5c0 CPU: 3
> COMMAND: "reopen_file"
> #0 [ffff9965007e3ba8] __schedule at ffffffff9b6e6095
> #1 [ffff9965007e3c38] schedule at ffffffff9b6e64df
> #2 [ffff9965007e3c48] rwsem_down_write_slowpath at ffffffff9af283d7
> #3 [ffff9965007e3cb8] legitimize_path at ffffffff9b0f975d
> #4 [ffff9965007e3d08] path_openat at ffffffff9b0fe55d
> #5 [ffff9965007e3dd8] do_filp_open at ffffffff9b100a33
> #6 [ffff9965007e3ee0] do_sys_open at ffffffff9b0eb2d6
> #7 [ffff9965007e3f38] do_syscall_64 at ffffffff9ae04315
> * (I think legitimize_path is bogus)
>
> in path_openat
> } else {
> const char *s = path_init(nd, flags);
> while (!(error = link_path_walk(s, nd)) &&
> (error = do_last(nd, file, op)) > 0) { <<<<
>
> do_last:
> if (open_flag & O_CREAT)
> inode_lock(dir->d_inode); <<<<
> else
> so it's trying to take inode->i_rwsem for the directory
>
> DENTRY INODE SUPERBLK TYPE PATH
> ffff8c68bb8e79c0 ffff8c691158ef20 ffff8c6915bf9000 DIR /mnt/vm1_smb/
> inode.i_rwsem is ffff8c691158efc0
>
> <struct rw_semaphore 0xffff8c691158efc0>:
> owner: <struct task_struct 0xffff8c6914275d00> (UN - 8856 -
> reopen_file), counter: 0x0000000000000003
> waitlist: 2
> 0xffff9965007e3c90 8863 reopen_file UN 0 1:29:22.926
> RWSEM_WAITING_FOR_WRITE
> 0xffff996500393e00 9802 ls UN 0 1:17:26.700
> RWSEM_WAITING_FOR_READ
>
>
> the owner of the inode.i_rwsem of the directory is:
>
> [0 00:00:00.109] [UN] PID: 8856 TASK: ffff8c6914275d00 CPU: 3
> COMMAND: "reopen_file"
> #0 [ffff99650065b828] __schedule at ffffffff9b6e6095
> #1 [ffff99650065b8b8] schedule at ffffffff9b6e64df
> #2 [ffff99650065b8c8] schedule_timeout at ffffffff9b6e9f89
> #3 [ffff99650065b940] msleep at ffffffff9af573a9
> #4 [ffff99650065b948] _cifsFileInfo_put.cold.63 at ffffffffc0a42dd6 [cifs]
> #5 [ffff99650065ba38] cifs_writepage_locked at ffffffffc0a0b8f3 [cifs]
> #6 [ffff99650065bab0] cifs_launder_page at ffffffffc0a0bb72 [cifs]
> #7 [ffff99650065bb30] invalidate_inode_pages2_range at ffffffff9b04d4bd
> #8 [ffff99650065bcb8] cifs_invalidate_mapping at ffffffffc0a11339 [cifs]
> #9 [ffff99650065bcd0] cifs_revalidate_mapping at ffffffffc0a1139a [cifs]
> #10 [ffff99650065bcf0] cifs_d_revalidate at ffffffffc0a014f6 [cifs]
> #11 [ffff99650065bd08] path_openat at ffffffff9b0fe7f7
> #12 [ffff99650065bdd8] do_filp_open at ffffffff9b100a33
> #13 [ffff99650065bee0] do_sys_open at ffffffff9b0eb2d6
> #14 [ffff99650065bf38] do_syscall_64 at ffffffff9ae04315
>
> cifs_launder_page is for page 0xffffd1e2c07d2480
>
> crash> page.index,mapping,flags 0xffffd1e2c07d2480
> index = 0x8
> mapping = 0xffff8c68f3cd0db0
> flags = 0xfffffc0008095
>
> PAGE-FLAG BIT VALUE
> PG_locked 0 0000001
> PG_uptodate 2 0000004
> PG_lru 4 0000010
> PG_waiters 7 0000080
> PG_writeback 15 0008000
>
>
> inode is ffff8c68f3cd0c40
> inode.i_rwsem is ffff8c68f3cd0ce0
> DENTRY INODE SUPERBLK TYPE PATH
> ffff8c68a1f1b480 ffff8c68f3cd0c40 ffff8c6915bf9000 REG
> /mnt/vm1_smb/testfile.8853
>
>
> this process holds the inode->i_rwsem for the parent directory, is
> laundering a page attached to the inode of the file it's opening, and in
> _cifsFileInfo_put is trying to down_write the cifsInodeInflock_sem
> for the file itself.
>
>
> <struct rw_semaphore 0xffff8c68f3cd0ce0>:
> owner: <struct task_struct 0xffff8c6914272e80> (UN - 8854 -
> reopen_file), counter: 0x0000000000000003
> waitlist: 1
> 0xffff9965005dfd80 8855 reopen_file UN 0 1:29:22.912
> RWSEM_WAITING_FOR_WRITE
>
> this is the inode.i_rwsem for the file
>
> the owner:
>
> [0 00:48:22.739] [UN] PID: 8854 TASK: ffff8c6914272e80 CPU: 2
> COMMAND: "reopen_file"
> #0 [ffff99650054fb38] __schedule at ffffffff9b6e6095
> #1 [ffff99650054fbc8] schedule at ffffffff9b6e64df
> #2 [ffff99650054fbd8] io_schedule at ffffffff9b6e68e2
> #3 [ffff99650054fbe8] __lock_page at ffffffff9b03c56f
> #4 [ffff99650054fc80] pagecache_get_page at ffffffff9b03dcdf
> #5 [ffff99650054fcc0] grab_cache_page_write_begin at ffffffff9b03ef4c
> #6 [ffff99650054fcd0] cifs_write_begin at ffffffffc0a064ec [cifs]
> #7 [ffff99650054fd30] generic_perform_write at ffffffff9b03bba4
> #8 [ffff99650054fda8] __generic_file_write_iter at ffffffff9b04060a
> #9 [ffff99650054fdf0] cifs_strict_writev.cold.70 at ffffffffc0a4469b [cifs]
> #10 [ffff99650054fe48] new_sync_write at ffffffff9b0ec1dd
> #11 [ffff99650054fed0] vfs_write at ffffffff9b0eed35
> #12 [ffff99650054ff00] ksys_write at ffffffff9b0eefd9
> #13 [ffff99650054ff38] do_syscall_64 at ffffffff9ae04315
>
> the process holds the inode->i_rwsem for the file to which it's writing,
> and is trying to __lock_page for the same page as in the other processes
>
>
> the other tasks:
> [0 00:00:00.028] [UN] PID: 8859 TASK: ffff8c6915479740 CPU: 2
> COMMAND: "reopen_file"
> #0 [ffff9965007b39d8] __schedule at ffffffff9b6e6095
> #1 [ffff9965007b3a68] schedule at ffffffff9b6e64df
> #2 [ffff9965007b3a78] schedule_timeout at ffffffff9b6e9f89
> #3 [ffff9965007b3af0] msleep at ffffffff9af573a9
> #4 [ffff9965007b3af8] cifs_new_fileinfo.cold.61 at ffffffffc0a42a07 [cifs]
> #5 [ffff9965007b3b78] cifs_open at ffffffffc0a0709d [cifs]
> #6 [ffff9965007b3cd8] do_dentry_open at ffffffff9b0e9b7a
> #7 [ffff9965007b3d08] path_openat at ffffffff9b0fe34f
> #8 [ffff9965007b3dd8] do_filp_open at ffffffff9b100a33
> #9 [ffff9965007b3ee0] do_sys_open at ffffffff9b0eb2d6
> #10 [ffff9965007b3f38] do_syscall_64 at ffffffff9ae04315
>
> this is opening the file, and is trying to down_write cinode->lock_sem
>
>
> [0 00:00:00.041] [UN] PID: 8860 TASK: ffff8c691547ae80 CPU: 2
> COMMAND: "reopen_file"
> [0 00:00:00.057] [UN] PID: 8861 TASK: ffff8c6915478000 CPU: 3
> COMMAND: "reopen_file"
> [0 00:00:00.059] [UN] PID: 8858 TASK: ffff8c6914271740 CPU: 2
> COMMAND: "reopen_file"
> [0 00:00:00.109] [UN] PID: 8862 TASK: ffff8c691547dd00 CPU: 6
> COMMAND: "reopen_file"
> #0 [ffff9965007c3c78] __schedule at ffffffff9b6e6095
> #1 [ffff9965007c3d08] schedule at ffffffff9b6e64df
> #2 [ffff9965007c3d18] schedule_timeout at ffffffff9b6e9f89
> #3 [ffff9965007c3d90] msleep at ffffffff9af573a9
> #4 [ffff9965007c3d98] _cifsFileInfo_put.cold.63 at ffffffffc0a42dd6 [cifs]
> #5 [ffff9965007c3e88] cifs_close at ffffffffc0a07aaf [cifs]
> #6 [ffff9965007c3ea0] __fput at ffffffff9b0efa6e
> #7 [ffff9965007c3ee8] task_work_run at ffffffff9aef1614
> #8 [ffff9965007c3f20] exit_to_usermode_loop at ffffffff9ae03d6f
> #9 [ffff9965007c3f38] do_syscall_64 at ffffffff9ae0444c
>
> closing the file, and trying to down_write cifsi->lock_sem
>
>
> [0 00:48:22.839] [UN] PID: 8857 TASK: ffff8c6914270000 CPU: 7
> COMMAND: "reopen_file"
> #0 [ffff9965006a7cc8] __schedule at ffffffff9b6e6095
> #1 [ffff9965006a7d58] schedule at ffffffff9b6e64df
> #2 [ffff9965006a7d68] io_schedule at ffffffff9b6e68e2
> #3 [ffff9965006a7d78] wait_on_page_bit at ffffffff9b03cac6
> #4 [ffff9965006a7e10] __filemap_fdatawait_range at ffffffff9b03b028
> #5 [ffff9965006a7ed8] filemap_write_and_wait at ffffffff9b040165
> #6 [ffff9965006a7ef0] cifs_flush at ffffffffc0a0c2fa [cifs]
> #7 [ffff9965006a7f10] filp_close at ffffffff9b0e93f1
> #8 [ffff9965006a7f30] __x64_sys_close at ffffffff9b0e9a0e
> #9 [ffff9965006a7f38] do_syscall_64 at ffffffff9ae04315
>
> in __filemap_fdatawait_range
> wait_on_page_writeback(page);
> for the same page of the file
>
>
>
> [0 00:48:22.718] [UN] PID: 8855 TASK: ffff8c69142745c0 CPU: 7
> COMMAND: "reopen_file"
> #0 [ffff9965005dfc98] __schedule at ffffffff9b6e6095
> #1 [ffff9965005dfd28] schedule at ffffffff9b6e64df
> #2 [ffff9965005dfd38] rwsem_down_write_slowpath at ffffffff9af283d7
> #3 [ffff9965005dfdf0] cifs_strict_writev at ffffffffc0a0c40a [cifs]
> #4 [ffff9965005dfe48] new_sync_write at ffffffff9b0ec1dd
> #5 [ffff9965005dfed0] vfs_write at ffffffff9b0eed35
> #6 [ffff9965005dff00] ksys_write at ffffffff9b0eefd9
> #7 [ffff9965005dff38] do_syscall_64 at ffffffff9ae04315
>
> inode_lock(inode);
>
>
> and one 'ls' later on, to see whether the rest of the mount is available
> (the test file is in the root, so we get blocked up on the directory
> ->i_rwsem), so the entire mount is unavailable
>
> [0 00:36:26.473] [UN] PID: 9802 TASK: ffff8c691436ae80 CPU: 4
> COMMAND: "ls"
> #0 [ffff996500393d28] __schedule at ffffffff9b6e6095
> #1 [ffff996500393db8] schedule at ffffffff9b6e64df
> #2 [ffff996500393dc8] rwsem_down_read_slowpath at ffffffff9b6e9421
> #3 [ffff996500393e78] down_read_killable at ffffffff9b6e95e2
> #4 [ffff996500393e88] iterate_dir at ffffffff9b103c56
> #5 [ffff996500393ec8] ksys_getdents64 at ffffffff9b104b0c
> #6 [ffff996500393f30] __x64_sys_getdents64 at ffffffff9b104bb6
> #7 [ffff996500393f38] do_syscall_64 at ffffffff9ae04315
>
> in iterate_dir:
> if (shared)
> res = down_read_killable(&inode->i_rwsem); <<<<
> else
> res = down_write_killable(&inode->i_rwsem);
>
Reported-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After doing mount() successfully we call cifs_try_adding_channels()
which will open as many channels as it can.
Channels are closed when the master session is closed.
The master connection becomes the first channel.
,-------------> global cifs_tcp_ses_list <-------------------------.
| |
'- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-'
(master con) (chan#1 con) (chan#2 con)
| ^ ^ ^
v '--------------------|--------------------'
cifs_ses |
- chan_count = 3 |
- chans[] ---------------------'
- smb3signingkey[]
(master signing key)
Note how channel connections don't have sessions. That's because
cifs_ses can only be part of one linked list (list_head are internal
to the elements).
For signing keys, each channel has its own signing key which must be
used only after the channel has been bound. While it's binding it must
use the master session signing key.
For encryption keys, since channel connections do not have sessions
attached we must now find matching session by looping over all sessions
in smb2_get_enc_key().
Each channel is opened like a regular server connection but at the
session setup request step it must set the
SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to.
Finally, while sending in compound_send_recv() for requests that
aren't negprot, ses-setup or binding related, use a channel by cycling
through the available ones (round-robin).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make logic of cifs_get_inode() much clearer by moving code to sub
functions and adding comments.
Document the steps this function does.
cifs_get_inode_info() gets and updates a file inode metadata from its
file path.
* If caller already has raw info data from server they can pass it.
* If inode already exists (just need to update) caller can pass it.
Step 1: get raw data from server if none was passed
Step 2: parse raw data into intermediate internal cifs_fattr struct
Step 3: set fattr uniqueid which is later used for inode number. This
can sometime be done from raw data
Step 4: tweak fattr according to mount options (file_mode, acl to mode
bits, uid, gid, etc)
Step 5: update or create inode from final fattr struct
* add is_smb1_server() helper
* add is_inode_cache_good() helper
* move SMB1-backupcreds-getinfo-retry to separate func
cifs_backup_query_path_info().
* move set-uniqueid code to separate func cifs_set_fattr_ino()
* don't clobber uniqueid from backup cred retry
* fix some probable corner cases memleaks
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently a lot of the code to initialize a connection & session uses
the cifs_ses as input. But depending on if we are opening a new session
or a new channel we need to use different server pointers.
Add a "binding" flag in cifs_ses and a helper function that returns
the server ptr a session should use (only in the sess establishment
code path).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
As we get down to the transport layer, plenty of functions are passed
the session pointer and assume the transport to use is ses->server.
Instead we modify those functions to pass (ses, server) so that we
can decouple the session from the server.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
adds:
- [no]multichannel to enable/disable multichannel
- max_channels=N to control how many channels to create
these options are then stored in the volume struct.
- store channels and max_channels in cifs_ses
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
New channels are going to be opened by walking the list sequentially,
so by sorting it we will connect to the fastest interfaces first.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Even when mounting modern protocol version the server may be
configured without supporting SMB2.1 leases and the client
uses SMB2 oplock to optimize IO performance through local caching.
However there is a problem in oplock break handling that leads
to missing a break notification on the client who has a file
opened. It latter causes big latencies to other clients that
are trying to open the same file.
The problem reproduces when there are multiple shares from the
same server mounted on the client. The processing code tries to
match persistent and volatile file ids from the break notification
with an open file but it skips all share besides the first one.
Fix this by looking up in all shares belonging to the server that
issued the oplock break.
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
It can cause
to fail with
modprobe: FATAL: Module <module> is builtin.
RHBZ: 1767094
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
During reconnecting, the transport may have already been destroyed and is in
the process being reconnected. In this case, return -EAGAIN to not fail and
to retry this I/O.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
It's not necessary to queue invalidated memory registration to work queue, as
all we need to do is to unmap the SG and make it usable again. This can save
CPU cycles in normal data paths as memory registration errors are rare and
normally only happens during reconnection.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Helps distinguish between an interrupted close and a truly
unmatched open.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When an OPEN command is cancelled we mark a mid as
cancelled and let the demultiplex thread process it
by closing an open handle. The problem is there is
a race between a system call thread and the demultiplex
thread and there may be a situation when the mid has
been already processed before it is set as cancelled.
Fix this by processing cancelled requests when mids
are being destroyed which means that there is only
one thread referencing a particular mid. Also set
mids as cancelled unconditionally on their state.
Cc: Stable <stable@vger.kernel.org>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a race between a system call processing thread
and the demultiplex thread when mid->resp_buf becomes NULL
and later is being accessed to get credits. It happens when
the 1st thread wakes up before a mid callback is called in
the 2nd one but the mid state has already been set to
MID_RESPONSE_RECEIVED. This causes NULL pointer dereference
in mid callback.
Fix this by saving credits from the response before we
update the mid state and then use this value in the mid
callback rather then accessing a response buffer.
Cc: Stable <stable@vger.kernel.org>
Fixes: ee258d7915 ("CIFS: Move credit processing to mid callbacks for SMB3")
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If Close command is interrupted before sending a request
to the server the client ends up leaking an open file
handle. This wastes server resources and can potentially
block applications that try to remove the file or any
directory containing this file.
Fix this by putting the close command into a worker queue,
so another thread retries it later.
Cc: Stable <stable@vger.kernel.org>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently the client translates O_SYNC and O_DIRECT flags
into corresponding SMB create options when openning a file.
The problem is that on reconnect when the file is being
re-opened the client doesn't set those flags and it causes
a server to reject re-open requests because create options
don't match. The latter means that any subsequent system
call against that open file fail until a share is re-mounted.
Fix this by properly setting SMB create options when
re-openning files after reconnects.
Fixes: 1013e760d1: ("SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags")
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The smb2/smb3 message checking code was logging to dmesg when mounting
with encryption ("seal") for compounded SMB3 requests. When encrypted
the whole frame (including potentially multiple compounds) is read
so the length field is longer than in the case of non-encrypted
case (where length field will match the the calculated length for
the particular SMB3 request in the compound being validated).
Avoids the warning on mount (with "seal"):
"srv rsp padded more than expected. Length 384 not ..."
Signed-off-by: Steve French <stfrench@microsoft.com>
Return directly after a call of the function "build_path_from_dentry"
failed at the beginning.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move the same error code assignments so that such exception handling
can be better reused at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reuse existing functionality from memdup_user() instead of keeping
duplicate source code.
Generated by: scripts/coccinelle/api/memdup_user.cocci
Fixes: f5b05d622a ("cifs: add IOCTL for QUERY_INFO passthrough to userspace")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>
The transport should return this error so the upper layer will reconnect.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Log these activities to help production support.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
While it's not friendly to fail user processes that issue more iovs
than we support, at least we should return the correct error code so the
user process gets a chance to retry with smaller number of iovs.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
On re-send, there might be a reconnect and all prevoius memory registrations
need to be invalidated and deregistered.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
On reconnect, the transport data structure is NULL and its information is not
available.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/cifs/file.c: In function 'cifs_flock':
fs/cifs/file.c:1704:8: warning:
variable 'netfid' set but not used [-Wunused-but-set-variable]
fs/cifs/file.c:1702:24: warning:
variable 'cinode' set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The flock system call locks the whole file rather than a byte
range and so is currently emulated by various other file systems
by simply sending a byte range lock for the whole file.
Add flock handling for cifs.ko in similar way.
xfstest generic/504 passes with this as well
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
fs/cifs/cifsacl.c:43:30: warning:
sid_user defined but not used [-Wunused-const-variable=]
It is never used, so remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Smatch gets confused because we sometimes refer to "server->srv_mutex" and
sometimes to "sess->server->srv_mutex". They refer to the same lock so
let's just make this consistent.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull cramfs fix from Al Viro:
"Regression fix, fallen through the cracks"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
cramfs: fix usage on non-MTD device
VLE was an old informal name of fixed-sized output
compression which came from published ATC'19 paper [1].
Drop those old annotations since erofs can handle
all encoded clusters in block-aligned basis, which
is wider than fixed-sized output compression after
larger clustersize feature is fully implemented.
Unaligned encoding won't be considered in EROFS
since it's not friendly to inplace I/O and perhaps
decompression inplace.
a) Fixed-sized output compression with 16KB pcluster:
___________________________________
|xxxxxxxx|xxxxxxxx|xxxxxxxx|xxxxxxxx|
|___ 0___|___ 1___|___ 2___|___ 3___| physical blocks
b) Block-aligned fixed-sized input compression with
16KB pcluster:
___________________________________
|xxxxxxxx|xxxxxxxx|xxxxxxxx|xxx00000|
|___ 0___|___ 1___|___ 2___|___ 3___| physical blocks
c) Block-unaligned fixed-sized input compression with
16KB compression unit:
____________________________________________
|..xxxxxx|xxxxxxxx|xxxxxxxx|xxxxxxxx|x.......|
|___ 0___|___ 1___|___ 2___|___ 3___|___ 4___| physical blocks
Refine better names for those as well.
[1] https://www.usenix.org/conference/atc19/presentation/gao
Link: https://lore.kernel.org/r/20191108033733.63919-1-gaoxiang25@huawei.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Introduce superblock checksum feature in order to
check at mounting time.
Note that the first 1024 bytes are ignore for x86
boot sectors and other oddities.
Link: https://lore.kernel.org/r/20191104024937.113939-1-gaoxiang25@huawei.com
Signed-off-by: Pratik Shinde <pratikshinde320@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Previously, both z_erofs_unzip_io and z_erofs_unzip_io_sb
record decompress queues for backend to use.
The only difference is that z_erofs_unzip_io is used for
on-stack sync decompression so that it doesn't have a super
block field (since the caller can pass it in its context),
but it increases complexity with only a pointer saving.
Rename z_erofs_unzip_io to z_erofs_decompressqueue with
a fixed super_block member and kill the other entirely,
and it can fallback to sync decompression if memory
allocation failure.
Link: https://lore.kernel.org/r/20191008125616.183715-4-gaoxiang25@huawei.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
When both CONFIG_CRAMFS_MTD and CONFIG_CRAMFS_BLOCKDEV are enabled, if
we fail to mount on MTD, we don't try on block device.
Note: this relies upon cramfs_mtd_fill_super() leaving no side
effects on fc state in case of failure; in general, failing
get_tree_...() does *not* mean "fine to try again"; e.g. parsed
options might've been consumed by fill_super callback and freed
on failure.
Fixes: 74f78fc5ef ("vfs: Convert cramfs to use the new mount API")
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
By default s_maxbytes is set to MAX_NON_LFS, which limits the usable
file size to 2GB, enforced by the vfs.
Commit b9b1f8d593 ("AFS: write support fixes") added support for the
64-bit fetch and store server operations, but did not change this value.
As a result, attempts to write past the 2G mark result in EFBIG errors:
$ dd if=/dev/zero of=foo bs=1M count=1 seek=2048
dd: error writing 'foo': File too large
Set s_maxbytes to MAX_LFS_FILESIZE.
Fixes: b9b1f8d593 ("AFS: write support fixes")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Servers sending callback breaks to the YFS_CM_SERVICE service may
send up to YFSCBMAX (1024) fids in a single RPC. Anything over
AFSCBMAX (50) will cause the assert in afs_break_callbacks to trigger.
Remove the assert, as the count has already been checked against
the appropriate max values in afs_deliver_cb_callback and
afs_deliver_yfs_cb_callback.
Fixes: 35dbfba311 ("afs: Implement the YFS cache manager service")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 56e94ea132.
Commit 56e94ea132 ("fs: ocfs2: fix possible null-pointer dereferences
in ocfs2_xa_prepare_entry()") introduces a regression that fail to
create directory with mount option user_xattr and acl. Actually the
reported NULL pointer dereference case can be correctly handled by
loc->xl_ops->xlo_add_entry(), so revert it.
Link: http://lkml.kernel.org/r/1573624916-83825-1-git-send-email-joseph.qi@linux.alibaba.com
Fixes: 56e94ea132 ("fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Thomas Voegtle <tv@lio96.de>
Acked-by: Changwei Ge <gechangwei@live.cn>
Cc: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When splicing using iomap_dio_rw() to a pipe, we may leak pipe pages
because bio_iov_iter_get_pages() records that the pipe will have full
extent worth of data however if file size is not block size aligned
iomap_dio_rw() returns less than what bio_iov_iter_get_pages() set up
and splice code gets confused leaking a pipe page with the file tail.
Handle the situation similarly to the old direct IO implementation and
revert iter to actually returned read amount which makes iter consistent
with value returned from iomap_dio_rw() and thus the splice code is
happy.
Fixes: ff6a9292e6 ("iomap: implement direct I/O")
CC: stable@vger.kernel.org
Reported-by: syzbot+991400e8eba7e00a26e1@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add some tracepoints so that we can more easily debug what the
filesystem is returning from ->iomap_begin.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Use the xfs_da_get_buf_daddr function directly for the two callers
that pass a mapped disk address, and then remove the mappedbno argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the code for reading an already mapped block into
xfs_da3_node_read_mapped, which is the only caller ever passing a block
number in the mappedbno argument and replace the mappedbno argument with
the simple xfs_dabuf_get flags.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Split xfs_da3_node_read into one variant that always looks up the daddr
and doesn't accept holes, and one that already has a daddr at hand.
This is in preparation of splitting up xfs_da_read_buf in a similar way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This argument is always hard coded to -1, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This argument is always hard coded to -1, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This argument is always hard coded to -1, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the mappedbno argument with the simple flags for xfs_da_reada_buf
and xfs_dir3_data_readahead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use a flags argument with the XFS_DABUF_MAP_HOLE_OK flag to signal that
a hole is okay and not corruption, and return 0 with *nmap set to 0 to
signal that case in the return value instead of a nameless -1 return
code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Merge xfs_buf_map_from_irec and xfs_da_map_covers_blocks into a single
loop in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Shortcut the creation of xfs_bmbt_irec and xfs_buf_map for the case
where the callers passed an already mapped xfs_daddr_t. This is in
preparation for splitting these cases out entirely later. Also reject
the mappedbno case for xfs_da_reada_buf as no callers currently uses
it and it will be removed soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
While we wait for queue to finish draining, use completions instead of
usleep_range(). This is better way of waiting for event.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We are sending whole of virtio_fs_forget struct to the other end over
virtqueue. Other end does not need to see elements like "struct list".
That's internal detail of guest kernel. Fix it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently we are duplicating logic to send forgets at two
places. Consolidate the code by calling one helper function.
This also uses virtqueue_add_outbuf() instead of
virtqueue_add_sgs(). Former is simpler to call.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/afs/server.c: In function afs_install_server:
fs/afs/server.c:157:6: warning: variable ret set but not used [-Wunused-but-set-variable]
It is not used since commit d2ddc776a4 ("afs:
Overhaul volume and server record caching and fileserver rotation")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/afs/dir_edit.c: In function afs_set_contig_bits:
fs/afs/dir_edit.c:75:20: warning: variable after set but not used [-Wunused-but-set-variable]
fs/afs/dir_edit.c: In function afs_set_contig_bits:
fs/afs/dir_edit.c:75:12: warning: variable before set but not used [-Wunused-but-set-variable]
fs/afs/dir_edit.c: In function afs_clear_contig_bits:
fs/afs/dir_edit.c💯20: warning: variable after set but not used [-Wunused-but-set-variable]
fs/afs/dir_edit.c: In function afs_clear_contig_bits:
fs/afs/dir_edit.c💯12: warning: variable before set but not used [-Wunused-but-set-variable]
They are never used since commit 63a4681ff3.
Fixes: 63a4681ff3 ("afs: Locally edit directory data for mkdir/create/unlink/...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Before this patch, when a node withdrew a gfs2 file system, it
wrote a (clean) unmount log header. That's wrong. You don't want
to write anything to the journal once you're withdrawn because
that's acknowledging that the transaction is complete and the
journal is in good shape, neither of which may be a valid
assumption when the file system is withdrawn. This is especially
true if the withdraw was caused due to io errors writing to the
journal in the first place. The best course of action is to leave
the journal "as is" until it may be safely replayed during
journal recovery, regardless of whether it's done by this node or
another.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_create_inode, gfs2_set_inode_blocks is called twice for no good reason.
Remove the unnecessary call.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
sprintf and snprintf are fragile in future maintenance, switch to
using scnprintf to ensure no accidental Use After Free conditions
are introduced.
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: David Howells <dhowells@redhat.com>
Change the name of call->iter to call->def_iter to represent the default
iterator.
Change the name of call->_iter to call->iter to represent the iterator
actually being used.
Signed-off-by: David Howells <dhowells@redhat.com>
Use call->_iter not &call->iter in debugging statements as the latter is a
convenience iter whereas the former represents we're actually doing at the
moment.
Signed-off-by: David Howells <dhowells@redhat.com>
Now that we can read also user and guest time safely under vtime, use
the relevant accessor to fix frozen kcpustat values on nohz_full CPUs.
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Link: https://lkml.kernel.org/r/20191121024430.19938-4-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
mm_release() contains the futex exit handling. mm_release() is called from
do_exit()->exit_mm() and from exec()->exec_mm().
In the exit_mm() case PF_EXITING and the futex state is updated. In the
exec_mm() case these states are not touched.
As the futex exit code needs further protections against exit races, this
needs to be split into two functions.
Preparatory only, no functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.240518241@linutronix.de
An error in e333f3bbef left the nfsd_acl_program->pg_vers array empty,
which effectively turned off the server's support for NFSv3 ACLs.
Fixes: e333f3bbef "nfsd: Allow containers to set supported nfs versions"
Cc: stable@vger.kernel.org
Cc: Trond Myklebust <trondmy@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The FS got stuck in the below stack when the storage is almost
full/dirty condition (when FG_GC is being done).
schedule_timeout
io_schedule_timeout
congestion_wait
f2fs_drop_inmem_pages_all
f2fs_gc
f2fs_balance_fs
__write_node_page
f2fs_fsync_node_pages
f2fs_do_sync_file
f2fs_ioctl
The root cause for this issue is there is a potential infinite loop
in f2fs_drop_inmem_pages_all() for the case where gc_failure is true
and when there an inode whose i_gc_failures[GC_FAILURE_ATOMIC] is
not set. Fix this by keeping track of the total atomic files
currently opened and using that to exit from this condition.
Fix-suggested-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Eric mentioned, bare printk{,_ratelimited} won't show which
filesystem instance these message is coming from, this patch tries
to show fs instance with sb->s_id field in all places we missed
before.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In afs_wait_for_call_to_complete(), rather than immediately aborting an
operation if a signal occurs, the code attempts to wait for it to
complete, using a schedule timeout of 2*RTT (or min 2 jiffies) and a
check that we're still receiving relevant packets from the server before
we consider aborting the call. We may even ping the server to check on
the status of the call.
However, there's a missing timeout reset in the event that we do
actually get a packet to process, such that if we then get a couple of
short stalls, we then time out when progress is actually being made.
Fix this by resetting the timeout any time we get something to process.
If it's the failure of the call then the call state will get changed and
we'll exit the loop shortly thereafter.
A symptom of this is data fetches and stores failing with EINTR when
they really shouldn't.
Fixes: bc5e3a546d ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Before this patch, gfs2_create_inode had a use-after-free for the
iopen glock in some error paths because it did this:
gfs2_glock_put(io_gl);
fail_gunlock2:
if (io_gl)
clear_bit(GLF_INODE_CREATING, &io_gl->gl_flags);
In some cases, the io_gl was used for create and only had one
reference, so the glock might be freed before the clear_bit().
This patch tries to straighten it out by only jumping to the
error paths where iopen is properly set, and moving the
gfs2_glock_put after the clear_bit.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
If the file system is corrupted such that a file's i_links_count is
too small, then it's possible that when unlinking that file, i_nlink
will already be zero. Previously we were working around this kind of
corruption by forcing i_nlink to one; but we were doing this before
trying to delete the directory entry --- and if the file system is
corrupted enough that ext4_delete_entry() fails, then we exit with
i_nlink elevated, and this causes the orphan inode list handling to be
FUBAR'ed, such that when we unmount the file system, the orphan inode
list can get corrupted.
A better way to fix this is to simply skip trying to call drop_nlink()
if i_nlink is already zero, thus moving the check to the place where
it makes the most sense.
https://bugzilla.kernel.org/show_bug.cgi?id=205433
Link: https://lore.kernel.org/r/20191112032903.8828-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
After previous patches removing bdev being passed around to set it to
bio, it has become unused in submit_extent_page. So it now has "only" 13
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
We can now remove the bdev from extent_map. Previous patches made sure
that bio_set_dev is correctly in all places and that we don't need to
grab it from latest_bdev or pass it around inside the extent map.
Signed-off-by: David Sterba <dsterba@suse.com>
bio_set_dev sets a bdev to a bio and is not only setting a pointer bug
also changing some state bits if there was a different bdev set before.
This is one thing that's not needed.
Another thing is that setting a bdev at bio allocation time is too early
and actually does not work with plain redundancy profiles, where each
time we submit a bio to a device, the bdev is set correctly.
In many places the bio bdev is set to latest_bdev that seems to serve as
a stub pointer "just to put something to bio". But we don't have to do
that.
Where do we know which bdev to set:
* for regular IO: submit_stripe_bio that's called by btrfs_map_bio
* repair IO: repair_io_failure, read or write from specific device
* super block write (using buffer_heads but uses raw bdev) and barriers
* scrub: this does not use all regular IO paths as it needs to reach all
copies, verify and fixup eventually, and for that all bdev management
is independent
* raid56: rbio_add_io_page, for the RMW write
* integrity-checker: does it's own low-level block tracking
Signed-off-by: David Sterba <dsterba@suse.com>
This is preparatory patch to remove @bdev parameter from
submit_extent_page. It can't be removed completely, because the cgroups
need it for wbc when initializing the bio
wbc_init_bio
bio_associate_blkg_from_css
dereference bdev->bi_disk->queue
The bdev pointer is the same as latest_bdev, thus no functional change.
We can retrieve it from fs_devices that's reachable through several
dereferences. The local variable shadows the parameter, but that's only
temporary.
Signed-off-by: David Sterba <dsterba@suse.com>
Testing with the new fsstress support for subvolumes uncovered a pretty
bad problem with rename exchange on subvolumes. We're modifying two
different subvolumes, but we only start the transaction on one of them,
so the other one is not added to the dirty root list. This is caught by
btrfs_cow_block() with a warning because the root has not been updated,
however if we do not modify this root again we'll end up pointing at an
invalid root because the root item is never updated.
Fix this by making sure we add the destination root to the trans list,
the same as we do with normal renames. This fixes the corruption.
Fixes: cdd1fedf82 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing a device replace, while at scrub.c:scrub_enumerate_chunks(), we
set the block group to RO mode and then wait for any ongoing writes into
extents of the block group to complete. While doing that wait we overwrite
the value of the variable 'ret' and can break out of the loop if an error
happens without turning the block group back into RW mode. So what happens
is the following:
1) btrfs_inc_block_group_ro() returns 0, meaning it set the block group
to RO mode (its ->ro field set to 1 or incremented to some value > 1);
2) Then btrfs_wait_ordered_roots() returns a value > 0;
3) Then if either joining or committing the transaction fails, we break
out of the loop wihtout calling btrfs_dec_block_group_ro(), leaving
the block group in RO mode forever.
To fix this, just remove the code that waits for ongoing writes to extents
of the block group, since it's not needed because in the initial setup
phase of a device replace operation, before starting to find all chunks
and their extents, we set the target device for replace while holding
fs_info->dev_replace->rwsem, which ensures that after releasing that
semaphore, any writes into the source device are made to the target device
as well (__btrfs_map_block() guarantees that). So while at
scrub_enumerate_chunks() we only need to worry about finding and copying
extents (from the source device to the target device) that were written
before we started the device replace operation.
Fixes: f0e9b7d640 ("Btrfs: fix race setting block group readonly during device replace")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running btrfs/072 with only one online CPU, it has a pretty high
chance to fail:
btrfs/072 12s ... _check_dmesg: something found in dmesg (see xfstests-dev/results//btrfs/072.dmesg)
- output mismatch (see xfstests-dev/results//btrfs/072.out.bad)
--- tests/btrfs/072.out 2019-10-22 15:18:14.008965340 +0800
+++ /xfstests-dev/results//btrfs/072.out.bad 2019-11-14 15:56:45.877152240 +0800
@@ -1,2 +1,3 @@
QA output created by 072
Silence is golden
+Scrub find errors in "-m dup -d single" test
...
And with the following call trace:
BTRFS info (device dm-5): scrub: started on devid 1
------------[ cut here ]------------
BTRFS: Transaction aborted (error -27)
WARNING: CPU: 0 PID: 55087 at fs/btrfs/block-group.c:1890 btrfs_create_pending_block_groups+0x3e6/0x470 [btrfs]
CPU: 0 PID: 55087 Comm: btrfs Tainted: G W O 5.4.0-rc1-custom+ #13
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:btrfs_create_pending_block_groups+0x3e6/0x470 [btrfs]
Call Trace:
__btrfs_end_transaction+0xdb/0x310 [btrfs]
btrfs_end_transaction+0x10/0x20 [btrfs]
btrfs_inc_block_group_ro+0x1c9/0x210 [btrfs]
scrub_enumerate_chunks+0x264/0x940 [btrfs]
btrfs_scrub_dev+0x45c/0x8f0 [btrfs]
btrfs_ioctl+0x31a1/0x3fb0 [btrfs]
do_vfs_ioctl+0x636/0xaa0
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x43/0x50
do_syscall_64+0x79/0xe0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
---[ end trace 166c865cec7688e7 ]---
[CAUSE]
The error number -27 is -EFBIG, returned from the following call chain:
btrfs_end_transaction()
|- __btrfs_end_transaction()
|- btrfs_create_pending_block_groups()
|- btrfs_finish_chunk_alloc()
|- btrfs_add_system_chunk()
This happens because we have used up all space of
btrfs_super_block::sys_chunk_array.
The root cause is, we have the following bad loop of creating tons of
system chunks:
1. The only SYSTEM chunk is being scrubbed
It's very common to have only one SYSTEM chunk.
2. New SYSTEM bg will be allocated
As btrfs_inc_block_group_ro() will check if we have enough space
after marking current bg RO. If not, then allocate a new chunk.
3. New SYSTEM bg is still empty, will be reclaimed
During the reclaim, we will mark it RO again.
4. That newly allocated empty SYSTEM bg get scrubbed
We go back to step 2, as the bg is already mark RO but still not
cleaned up yet.
If the cleaner kthread doesn't get executed fast enough (e.g. only one
CPU), then we will get more and more empty SYSTEM chunks, using up all
the space of btrfs_super_block::sys_chunk_array.
[FIX]
Since scrub/dev-replace doesn't always need to allocate new extent,
especially chunk tree extent, so we don't really need to do chunk
pre-allocation.
To break above spiral, here we introduce a new parameter to
btrfs_inc_block_group(), @do_chunk_alloc, which indicates whether we
need extra chunk pre-allocation.
For relocation, we pass @do_chunk_alloc=true, while for scrub, we pass
@do_chunk_alloc=false.
This should keep unnecessary empty chunks from popping up for scrub.
Also, since there are two parameters for btrfs_inc_block_group_ro(),
add more comment for it.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
struct btrfs_fs_devices::rotating currently is declared as an integer
variable but only used as a boolean.
Change the variable definition to bool and update to code touching it to
set 'true' and 'false'.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
struct btrfs_fs_devices::seeding currently is declared as an integer
variable but only used as a boolean.
Change the variable definition to bool and update to code touching it to
set 'true' and 'false'.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The type name is misleading, a single entry is named 'cache' while this
normally means a collection of objects. Rename that everywhere. Also the
identifier was quite long, making function prototypes harder to format.
Suggested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For read_one_block_group(), its only caller has already got the item key
to search next block group item.
So we can use that key directly without doing our own convertion on
stack.
Also, since that key used in btrfs_read_block_groups() is vital for
block group item search, add 'const' keyword for that parameter to
prevent read_one_block_group() to modify it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Refactor the work inside the loop of btrfs_read_block_groups() into one
separate function, read_one_block_group().
This allows read_one_block_group to be reused for later BG_TREE feature.
The refactor does the following extra fix:
- Use btrfs_fs_incompat() to replace open-coded feature check
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A nice writeup of the LKMM (Linux Kernel Memory Model) rules for access
once policies can be found here
https://lwn.net/Articles/799218/#Access-Marking%20Policies .
The locked and unlocked access to eb::blocking_writers should be
annotated accordingly, following this:
Writes:
- locked write must use ONCE, may use plain read
- unlocked write must use ONCE
Reads:
- unlocked read must use ONCE
- locked read may use plain read iff not mixed with unlocked read
- unlocked read then locked must use ONCE
There's one difference on the assembly level, where
btrfs_tree_read_lock_atomic and btrfs_try_tree_read_lock used the cached
value and did not reevaluate it after taking the lock. This could have
missed some opportunities to take the lock in case blocking writers
changed between the calls, but the window is just a few instructions
long. As this is in try-lock, the callers handle that.
Signed-off-by: David Sterba <dsterba@suse.com>
The increment and decrement was inherited from previous version that
used atomics, switched in commit 06297d8cef ("btrfs: switch
extent_buffer blocking_writers from atomic to int"). The only possible
values are 0 and 1 so we can set them directly.
The generated assembly (gcc 9.x) did the direct value assignment in
btrfs_set_lock_blocking_write (asm diff after change in 06297d8cef):
5d: test %eax,%eax
5f: je 62 <btrfs_set_lock_blocking_write+0x22>
61: retq
- 62: lock incl 0x44(%rdi)
- 66: add $0x50,%rdi
- 6a: jmpq 6f <btrfs_set_lock_blocking_write+0x2f>
+ 62: movl $0x1,0x44(%rdi)
+ 69: add $0x50,%rdi
+ 6d: jmpq 72 <btrfs_set_lock_blocking_write+0x32>
The part in btrfs_tree_unlock did a decrement because
BUG_ON(blockers > 1) is probably not a strong hint for the compiler, but
otherwise the output looks safe:
- lock decl 0x44(%rdi)
+ sub $0x1,%eax
+ mov %eax,0x44(%rdi)
Signed-off-by: David Sterba <dsterba@suse.com>
There are two ifs that use eb::blocking_writers. As this is a variable
modified inside and outside of locks, we could minimize number of
accesses to avoid problems with getting different results at different
times.
The access here is locked so this can only race with btrfs_tree_unlock
that sets blocking_writers to 0 without lock and unsets the lock owner.
The first branch is taken only if the same thread already holds the
lock, the second if checks for blocking writers. Here we'd either unlock
and wait, or proceed. Both are valid states of the locking protocol.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
When there are no raid1c3 or raid1c4 block groups left after balance
(either convert or with other filters applied), remove the incompat bit.
This is already done for RAID56, do the same for RAID1C34.
Signed-off-by: David Sterba <dsterba@suse.com>
The new raid1c3 and raid1c4 profiles are backward incompatible and the
name shall be 'raid1c34', the status can be found in the global
supported features in /sys/fs/btrfs/features or in the per-filesystem
directory.
Signed-off-by: David Sterba <dsterba@suse.com>
Add new block group profile to store 4 copies in a simliar way that
current RAID1 does. The profile attributes and constraints are defined
in the raid table and used by the same code that already handles the 2-
and 3-copy RAID1.
The minimum number of devices is 4, the maximum number of devices/chunks
that can be lost/damaged is 3. There is no comparable traditional RAID
level, the profile is added for future needs to accompany triple-parity
and beyond.
Signed-off-by: David Sterba <dsterba@suse.com>
Add new block group profile to store 3 copies in a simliar way that
current RAID1 does. The profile attributes and constraints are defined
in the raid table and used by the same code that already handles the
2-copy RAID1.
The minimum number of devices is 3, the maximum number of devices/chunks
that can be lost/damaged is 2. Like RAID6 but with 33% space
utilization.
Signed-off-by: David Sterba <dsterba@suse.com>
In commit "Btrfs: use REQ_CGROUP_PUNT for worker thread submitted bios",
cow_file_range_async gained wbc as a parameter and this makes passing
write flags redundant. Set it inside the function and remove the
parameter.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__extent_writepage reads write flags from wbc and passes both to
__extent_writepage_io. This makes write_flags redundant and we can
remove it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Backreference walking, which is used by send to figure if it can issue
clone operations instead of write operations, can be very slow and use
too much memory when extents have many references. This change simply
skips backreference walking when an extent has more than 64 references,
in which case we fallback to a write operation instead of a clone
operation. This limit is conservative and in practice I observed no
signicant slowdown with up to 100 references and still low memory usage
up to that limit.
This is a temporary workaround until there are speedups in the backref
walking code, and as such it does not attempt to add extra interfaces or
knobs to tweak the threshold.
Reported-by: Atemu <atemu.main@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAE4GHgkvqVADtS4AzcQJxo0Q1jKQgKaW3JGp3SGdoinVo=C9eQ@mail.gmail.com/T/#me55dc0987f9cc2acaa54372ce0492c65782be3fa
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For send we currently skip clone operations when the source and
destination files are the same. This is so because clone didn't support
this case in its early days, but support for it was added back in May
2013 by commit a96fbc7288 ("Btrfs: allow file data clone within a
file"). This change adds support for it.
Example:
$ mkfs.btrfs -f /dev/sdd
$ mount /dev/sdd /mnt/sdd
$ xfs_io -f -c "pwrite -S 0xab -b 64K 0 64K" /mnt/sdd/foobar
$ xfs_io -c "reflink /mnt/sdd/foobar 0 64K 64K" /mnt/sdd/foobar
$ btrfs subvolume snapshot -r /mnt/sdd /mnt/sdd/snap
$ mkfs.btrfs -f /dev/sde
$ mount /dev/sde /mnt/sde
$ btrfs send /mnt/sdd/snap | btrfs receive /mnt/sde
Without this change file foobar at the destination has a single 128Kb
extent:
$ filefrag -v /mnt/sde/snap/foobar
Filesystem type is: 9123683e
File size of /mnt/sde/snap/foobar is 131072 (32 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 31: 0.. 31: 32: last,unknown_loc,delalloc,eof
/mnt/sde/snap/foobar: 1 extent found
With this we get a single 64Kb extent that is shared at file offsets 0
and 64K, just like in the source filesystem:
$ filefrag -v /mnt/sde/snap/foobar
Filesystem type is: 9123683e
File size of /mnt/sde/snap/foobar is 131072 (32 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 15: 3328.. 3343: 16: shared
1: 16.. 31: 3328.. 3343: 16: 3344: last,shared,eof
/mnt/sde/snap/foobar: 2 extents found
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When deleting large files (which cross block group boundary) with
discard mount option, we find some btrfs_discard_extent() calls only
trimmed part of its space, not the whole range:
btrfs_discard_extent: type=0x1 start=19626196992 len=2144530432 trimmed=1073741824 ratio=50%
type: bbio->map_type, in above case, it's SINGLE DATA.
start: Logical address of this trim
len: Logical length of this trim
trimmed: Physically trimmed bytes
ratio: trimmed / len
Thus leaving some unused space not discarded.
[CAUSE]
When discard mount option is specified, after a transaction is fully
committed (super block written to disk), we begin to cleanup pinned
extents in the following call chain:
btrfs_commit_transaction()
|- btrfs_finish_extent_commit()
|- find_first_extent_bit(unpin, 0, &start, &end, EXTENT_DIRTY);
|- btrfs_discard_extent()
However, pinned extents are recorded in an extent_io_tree, which can
merge adjacent extent states.
When a large file gets deleted and it has adjacent file extents across
block group boundary, we will get a large merged range like this:
|<--- BG1 --->|<--- BG2 --->|
|//////|<-- Range to discard --->|/////|
To discard that range, we have the following calls:
btrfs_discard_extent()
|- btrfs_map_block()
| Returned bbio will end at BG1's end. As btrfs_map_block()
| never returns result across block group boundary.
|- btrfs_issuse_discard()
Issue discard for each stripe.
So we will only discard the range in BG1, not the remaining part in BG2.
Furthermore, this bug is not that reliably observed, for above case, if
there is no other extent in BG2, BG2 will be empty and btrfs will trim
all space of BG2, covering up the bug.
[FIX]
- Allow __btrfs_map_block_for_discard() to modify @length parameter
btrfs_map_block() uses its @length paramter to notify the caller how
many bytes are mapped in current call.
With __btrfs_map_block_for_discard() also modifing the @length,
btrfs_discard_extent() now understands when to do extra trim.
- Call btrfs_map_block() in a loop until we hit the range end Since we
now know how many bytes are mapped each time, we can iterate through
each block group boundary and issue correct trim for each range.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old code goes:
offset = logical - em->start;
length = min_t(u64, em->len - offset, length);
Where @length calculation is dependent on offset, it can take reader
several more seconds to find it's just the same code as:
offset = logical - em->start;
length = min_t(u64, em->start + em->len - logical, length);
Use above code to make the length calculate independent from other
variable, thus slightly increase the readability.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In check_extent_data_item(), we read file extent type without verifying
if the item size is valid.
Add such check to ensure the file extent type we read is correct.
The check is not as accurate as we need to cover both inline and regular
extents, so it only checks if the item size is larger or equal to inline
header.
So the existing size checks on inline/regular extents are still needed.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The "&fs_info->dev_replace.rwsem" and "&dev_replace->rwsem" refer to
the same lock but Smatch is not clever enough to figure that out so it
leads to static checker warnings. It's better to use it consistently
anyway.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The backup_root_index member stores the index at which the backup root
should be saved upon next transaction commit. However, there is a
small deviation from this behavior in the form of a check in
backup_super_roots which checks if current root generation equals to the
generation of the previous root. This can trigger in the following
scenario:
slot0: gen-2
slot1: gen-1
slot2: gen
slot3: unused
Now suppose slot3 (which is also the root specified in the super block)
is corrupted hence init_tree_roots chooses to use the backup root at
slot2, meaning read_backup_root will read slot2 and assign the
superblock generation to gen-1. Despite this backup_root_index will
point at slot3 because its init happens in init_backup_root_slot, long
before any parsing of the backup roots occur. Then on next transaction
start, gen-1 will be incremented by 1 making the root's generation
equal gen. Subsequently, on transaction commit the following check
triggers:
if (btrfs_backup_tree_root_gen(root_backup) ==
btrfs_header_generation(info->tree_root->node))
This causes the 'next_backup', which is the index at which the backup is
going to be written to, to set to last_backup, which will be slot2.
All of this is a very confusing way of expressing the following
invariant:
Always write a backup root at the index following the last used backup
root.
This commit streamlines this logic by setting backup_root_index to the
next index after the one used for mount.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old name name was an awful misnomer because it didn't really find
the oldest super backup per-se but rather its slot. For example if we
have:
slot0: gen - 2
slot1: gen - 1
slot2: gen
slot3: empty
init_backup_root_slot will return slot3 and not slot0.
The new name is more appropriate since the function doesn't care whether
there is a valid backup in the returned slot or not.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function has been superseded by previous commits and is no longer
used so just remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the filesystem is not well formed and no trees are loaded it's
pointless holding the objectid_mutex. Just remove its usage.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The code responsible for reading and initializing tree roots is
scattered in open_ctree among 2 labels, emulating a loop. This is rather
confusing to reason about. Instead, factor the code to a new function,
init_tree_roots which implements the same logical flow.
There are a couple of notable differences, namely:
* Instead of using next_backup_root it's using the newly introduced
read_backup_root.
* If read_backup_root returns an error init_tree_roots propagates the
error and there is no special handling of that case e.g. the code jumps
straight to 'fail_tree_roots' label. The old code, however, was
(erroneously) jumping to 'fail_block_groups' label if next_backup_root
did fail, this was unnecessary since the tree roots init logic doesn't
modify the state of block groups.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function will replace next_root_backup with a much saner/cleaner
interface.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's no longer needed following cleanups around find_newest_backup_root
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Backup roots are always written in a circular manner. By definition we
can only ever have 1 backup root whose generation equals to that of the
superblock. Hence, the 'if' in the for loop will trigger at most once.
This is sufficient to return the newest backup root.
Furthermore the newest_gen parameter is always set to the generation of
the superblock. This value can be obtained from the fs_info.
This patch removes the unnecessary code dealing with the wraparound
case and makes 'newest_gen' a local variable.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The inode delalloc mutex was added a long time ago by commit f248679e86
("Btrfs: add a delalloc mutex to inodes for delalloc reservations"), and
the reason for its introduction is not very clear from the change log. It
claims it solves bogus warnings from lockdep, however it lacks an example
report/warning from lockdep, or any explanation.
Since we have enough concurrentcy protection from the locks of the space
info and block reserve objects, and such lockdep warnings don't seem to
exist anymore (at least on a 5.3 kernel I couldn't get them with fstests,
ltp, fs_mark, etc), remove it, simplifying things a bit and decreasing
the size of the btrfs_inode structure. With some quick fio tests doing
direct IO and mmap writes I couldn't observe any significant performance
increase either (direct IO writes that don't increase the file's size
don't hold the inode's lock for their entire duration and mmap writes
don't hold the inode's lock at all), which are the only type of writes
that could see any performance gain due to less serialization.
Review feedback from Josef:
The problem was taking the i_mutex in mmap, which is how I was
protecting delalloc reservations originally. The delalloc mutex didn't
come with all of the other dependencies. That's what the lockdep
messages were about, removing the lock isn't going to make them appear
again.
We _had_ to lock around this because we used to do tricks to keep from
over-reserving, and if we didn't serialize delalloc reservations we'd
end up with ugly accounting problems when we tried to clean things up.
However with my recentish changes this isn't the case anymore. Every
operation is responsible for reserving its space, and then adding it to
the inode. Then cleaning up is straightforward and can't be mucked up
by other users. So we no longer need the delalloc mutex to safe us from
ourselves.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It is not used anymore since commit 957780eb27 ("Btrfs: introduce
ticketed enospc infrastructure"), so just remove it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_statfs() we cache fs_info::space_info in a local variable only
to use it once in a list_for_each_rcu() statement.
Not only is the local variable unnecessary it even makes the code harder
to follow as it's not clear which list it is iterating.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The on-disk format of block group item makes use of the key that stores
the offset and length. This is further used in the code, although this
makes thing harder to understand. The key is also packed so the
offset/length is not properly aligned as u64.
Add start (key.objectid) and length (key.offset) members to block group
and remove the embedded key. When the item is searched or written, a
local variable for key is used.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Accessors defined by BTRFS_SETGET_FUNCS take a raw extent buffer and
manipulate the items there, there's no special prefix required. The
block group accessors had _disk_ because previously the names were
occupied by the on-stack accessors. As this has been addressed in the
previous patch, we can now unify the naming.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All accessors defined by BTRFS_SETGET_STACK_FUNCS contain _stack_ in the
name, the block group ones were not following that scheme, so let's
switch them.
Signed-off-by: David Sterba <dsterba@suse.com>
The members ::used and ::flags are now in the block group cache
structure, the last one is chunk_objectid, but that's set to a fixed
value and otherwise unused. The item is constructed from a local
variable before write, so we can remove the embedded one from block
group.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The flags are read from the item that's embedded to block group struct,
but the item will be removed. Use the ::flags after read and before
write.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For unknown reasons, the member 'used' in the block group struct is
stored in the b-tree item and accessed everywhere using the special
accessor helper. Let's unify it and make it a regular member and only
update the item before writing it to the tree.
The item is still being used for flags and chunk_objectid, there's some
duplication until the item is removed in following patches.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The last user of btrfs_bio::flags was removed in commit 326e1dbb57
("block: remove management of bi_remaining when restoring original
bi_end_io"), remove it.
(Tagged for stable as the structure is heavily used and space savings
are desirable.)
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently all the checksum algorithms generate a fixed size digest size
and we use it. The on-disk format can hold up to BTRFS_CSUM_SIZE bytes
and BLAKE2b produces digest of 512 bits by default. We can't do that and
will use the blake2b-256, this needs to be passed to the crypto API.
Separate that from the base algorithm name and add a member to request
specific driver, in this case with the digest size.
The only place that uses the driver name is the crypto API setup.
Signed-off-by: David Sterba <dsterba@suse.com>
Show the used driver for the checksum algorithm for the filesystem in
sysfs file /sys/fs/btrfs/UUID/features/checksum, eg.
crc32c (crc32c-generic)
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Export supported checksum algorithms via sysfs in the list of static
features:
/sys/fs/btrfs/features/supported_checksums
Space spearated list of checksum algorithm names.
Co-developed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Add sha256 to the list of possible checksumming algorithms used by BTRFS.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add xxhash64 to the list of possible checksumming algorithms used by
BTRFS.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Redefine XFS_IS_CORRUPT so that it reports corruptions only via
xfs_corruption_report. Since these are on-disk contents (and not checks
of internal state), we don't ever want to panic the kernel. This also
amends the corruption report to recommend unmounting and running
xfs_repair.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We can remove it now, without needing to rework the KM_ flags.
Use kmem_cache_free() directly.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use kmem_cache_destroy directly
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
